DAPLink
DAPlink is an open source project that implements the embedded firmware required for a Cortex debug probe. The project is hosted on GitHub and is published under an Apache 2.0 license, making it attractive for commercial developments.
The software project is complemented by a series of reference designs for creating the DAPLink debug probe hardware, which is available in the [HDK documentation]../porting/porting-tools.html#arm-mbed-hdk).
DAPLink features
A DAPLink debug probe connects to your host computer through USB and connects to your target system (the one to be programmed and debugged) through a standard Cortex debug connector. It provides three main features - all over a single USB connection.
HID interface
The driver-less HID interface provides a channel over which the CMSIS-DAP debug protocol runs. This enables all the leading industry standard toolchains to program and debug the target system.
Supported tools include:
- Keil MDK.
- IAR Workbench.
- pyOCD.
USB drag and drop programming
DAPLink debug probes appear on the host computer as a USB disk. Program files in binary (.bin) and hex (.hex) formats can be copied onto the USB disk, which then programs them into the memory of the target system.
Note: The DAPLink probe needs to contain the programming algorithms specific to the target system. Therefore, the version of the DAPLink firmware you use must match the target system.
USB serial port
The DAPLink debug probe also provides a USB serial port, which can be bridged through to a TTL UART on the target system. The USB serial port will appear on a Windows machine as a COM port, or on a Linux machine as a /dev/tty interface.
For more information on configuring your host computer to use this feature, please the Windows serial driver information.