Juan Salazar
test
Revision 0:c792b17d9f78, committed 2021-12-03
- Comitter:
- juansal12
- Date:
- Fri Dec 03 23:00:34 2021 +0000
- Commit message:
- uploaded sofi code ;
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/AnalogIn.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGIN_H
+#define MBED_ANALOGIN_H
+
+#include "platform.h"
+
+#if DEVICE_ANALOGIN
+
+#include "analogin_api.h"
+
+namespace mbed {
+
+/** An analog input, used for reading the voltage on a pin
+ *
+ * Example:
+ * @code
+ * // Print messages when the AnalogIn is greater than 50%
+ *
+ * #include "mbed.h"
+ *
+ * AnalogIn temperature(p20);
+ *
+ * int main() {
+ * while(1) {
+ * if(temperature > 0.5) {
+ * printf("Too hot! (%f)", temperature.read());
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class AnalogIn {
+
+public:
+
+ /** Create an AnalogIn, connected to the specified pin
+ *
+ * @param pin AnalogIn pin to connect to
+ * @param name (optional) A string to identify the object
+ */
+ AnalogIn(PinName pin) {
+ analogin_init(&_adc, pin);
+ }
+
+ /** Read the input voltage, represented as a float in the range [0.0, 1.0]
+ *
+ * @returns A floating-point value representing the current input voltage, measured as a percentage
+ */
+ float read() {
+ return analogin_read(&_adc);
+ }
+
+ /** Read the input voltage, represented as an unsigned short in the range [0x0, 0xFFFF]
+ *
+ * @returns
+ * 16-bit unsigned short representing the current input voltage, normalised to a 16-bit value
+ */
+ unsigned short read_u16() {
+ return analogin_read_u16(&_adc);
+ }
+
+#ifdef MBED_OPERATORS
+ /** An operator shorthand for read()
+ *
+ * The float() operator can be used as a shorthand for read() to simplify common code sequences
+ *
+ * Example:
+ * @code
+ * float x = volume.read();
+ * float x = volume;
+ *
+ * if(volume.read() > 0.25) { ... }
+ * if(volume > 0.25) { ... }
+ * @endcode
+ */
+ operator float() {
+ return read();
+ }
+#endif
+
+protected:
+ analogin_t _adc;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/AnalogOut.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,121 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGOUT_H
+#define MBED_ANALOGOUT_H
+
+#include "platform.h"
+
+#if DEVICE_ANALOGOUT
+
+#include "analogout_api.h"
+
+namespace mbed {
+
+/** An analog output, used for setting the voltage on a pin
+ *
+ * Example:
+ * @code
+ * // Make a sawtooth output
+ *
+ * #include "mbed.h"
+ *
+ * AnalogOut tri(p18);
+ * int main() {
+ * while(1) {
+ * tri = tri + 0.01;
+ * wait_us(1);
+ * if(tri == 1) {
+ * tri = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class AnalogOut {
+
+public:
+
+ /** Create an AnalogOut connected to the specified pin
+ *
+ * @param AnalogOut pin to connect to (18)
+ */
+ AnalogOut(PinName pin) {
+ analogout_init(&_dac, pin);
+ }
+
+ /** Set the output voltage, specified as a percentage (float)
+ *
+ * @param value A floating-point value representing the output voltage,
+ * specified as a percentage. The value should lie between
+ * 0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%).
+ * Values outside this range will be saturated to 0.0f or 1.0f.
+ */
+ void write(float value) {
+ analogout_write(&_dac, value);
+ }
+
+ /** Set the output voltage, represented as an unsigned short in the range [0x0, 0xFFFF]
+ *
+ * @param value 16-bit unsigned short representing the output voltage,
+ * normalised to a 16-bit value (0x0000 = 0v, 0xFFFF = 3.3v)
+ */
+ void write_u16(unsigned short value) {
+ analogout_write_u16(&_dac, value);
+ }
+
+ /** Return the current output voltage setting, measured as a percentage (float)
+ *
+ * @returns
+ * A floating-point value representing the current voltage being output on the pin,
+ * measured as a percentage. The returned value will lie between
+ * 0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%).
+ *
+ * @note
+ * This value may not match exactly the value set by a previous write().
+ */
+ float read() {
+ return analogout_read(&_dac);
+ }
+
+#ifdef MBED_OPERATORS
+ /** An operator shorthand for write()
+ */
+ AnalogOut& operator= (float percent) {
+ write(percent);
+ return *this;
+ }
+
+ AnalogOut& operator= (AnalogOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** An operator shorthand for read()
+ */
+ operator float() {
+ return read();
+ }
+#endif
+
+protected:
+ dac_t _dac;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BusIn.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,98 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSIN_H
+#define MBED_BUSIN_H
+
+#include "platform.h"
+#include "DigitalIn.h"
+
+namespace mbed {
+
+/** A digital input bus, used for reading the state of a collection of pins
+ */
+class BusIn {
+
+public:
+ /* Group: Configuration Methods */
+
+ /** Create an BusIn, connected to the specified pins
+ *
+ * @param <n> DigitalIn pin to connect to bus bit <n> (p5-p30, NC)
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusIn(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusIn(PinName pins[16]);
+
+ virtual ~BusIn();
+
+ /** Read the value of the input bus
+ *
+ * @returns
+ * An integer with each bit corresponding to the value read from the associated DigitalIn pin
+ */
+ int read();
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+ /** Binary mask of bus pins connected to actual pins (not NC pins)
+ * If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+ *
+ * @returns
+ * Binary mask of connected pins
+ */
+ int mask() {
+ return _nc_mask;
+ }
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for read()
+ */
+ operator int();
+
+ /** Access to particular bit in random-iterator fashion
+ */
+ DigitalIn & operator[] (int index);
+#endif
+
+protected:
+ DigitalIn* _pin[16];
+
+ /** Mask of bus's NC pins
+ * If bit[n] is set to 1 - pin is connected
+ * if bit[n] is cleared - pin is not connected (NC)
+ */
+ int _nc_mask;
+
+ /* disallow copy constructor and assignment operators */
+private:
+ BusIn(const BusIn&);
+ BusIn & operator = (const BusIn&);
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BusInOut.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,117 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSINOUT_H
+#define MBED_BUSINOUT_H
+
+#include "DigitalInOut.h"
+
+namespace mbed {
+
+/** A digital input output bus, used for setting the state of a collection of pins
+ */
+class BusInOut {
+
+public:
+
+ /** Create an BusInOut, connected to the specified pins
+ *
+ * @param p<n> DigitalInOut pin to connect to bus bit p<n> (p5-p30, NC)
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusInOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusInOut(PinName pins[16]);
+
+ virtual ~BusInOut();
+
+ /* Group: Access Methods */
+
+ /** Write the value to the output bus
+ *
+ * @param value An integer specifying a bit to write for every corresponding DigitalInOut pin
+ */
+ void write(int value);
+
+ /** Read the value currently output on the bus
+ *
+ * @returns
+ * An integer with each bit corresponding to associated DigitalInOut pin setting
+ */
+ int read();
+
+ /** Set as an output
+ */
+ void output();
+
+ /** Set as an input
+ */
+ void input();
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+ /** Binary mask of bus pins connected to actual pins (not NC pins)
+ * If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+ *
+ * @returns
+ * Binary mask of connected pins
+ */
+ int mask() {
+ return _nc_mask;
+ }
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for write()
+ */
+ BusInOut& operator= (int v);
+ BusInOut& operator= (BusInOut& rhs);
+
+ /** Access to particular bit in random-iterator fashion
+ */
+ DigitalInOut& operator[] (int index);
+
+ /** A shorthand for read()
+ */
+ operator int();
+#endif
+
+protected:
+ DigitalInOut* _pin[16];
+
+ /** Mask of bus's NC pins
+ * If bit[n] is set to 1 - pin is connected
+ * if bit[n] is cleared - pin is not connected (NC)
+ */
+ int _nc_mask;
+
+ /* disallow copy constructor and assignment operators */
+private:
+ BusInOut(const BusInOut&);
+ BusInOut & operator = (const BusInOut&);
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BusOut.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,101 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSOUT_H
+#define MBED_BUSOUT_H
+
+#include "DigitalOut.h"
+
+namespace mbed {
+
+/** A digital output bus, used for setting the state of a collection of pins
+ */
+class BusOut {
+
+public:
+
+ /** Create an BusOut, connected to the specified pins
+ *
+ * @param p<n> DigitalOut pin to connect to bus bit <n> (p5-p30, NC)
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusOut(PinName pins[16]);
+
+ virtual ~BusOut();
+
+ /** Write the value to the output bus
+ *
+ * @param value An integer specifying a bit to write for every corresponding DigitalOut pin
+ */
+ void write(int value);
+
+ /** Read the value currently output on the bus
+ *
+ * @returns
+ * An integer with each bit corresponding to associated DigitalOut pin setting
+ */
+ int read();
+
+ /** Binary mask of bus pins connected to actual pins (not NC pins)
+ * If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+ *
+ * @returns
+ * Binary mask of connected pins
+ */
+ int mask() {
+ return _nc_mask;
+ }
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for write()
+ */
+ BusOut& operator= (int v);
+ BusOut& operator= (BusOut& rhs);
+
+ /** Access to particular bit in random-iterator fashion
+ */
+ DigitalOut& operator[] (int index);
+
+ /** A shorthand for read()
+ */
+ operator int();
+#endif
+
+protected:
+ DigitalOut* _pin[16];
+
+ /** Mask of bus's NC pins
+ * If bit[n] is set to 1 - pin is connected
+ * if bit[n] is cleared - pin is not connected (NC)
+ */
+ int _nc_mask;
+
+ /* disallow copy constructor and assignment operators */
+private:
+ BusOut(const BusOut&);
+ BusOut & operator = (const BusOut&);
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/CAN.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,243 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_H
+#define MBED_CAN_H
+
+#include "platform.h"
+
+#if DEVICE_CAN
+
+#include "can_api.h"
+#include "can_helper.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** CANMessage class
+ */
+class CANMessage : public CAN_Message {
+
+public:
+ /** Creates empty CAN message.
+ */
+ CANMessage() : CAN_Message() {
+ len = 8;
+ type = CANData;
+ format = CANStandard;
+ id = 0;
+ memset(data, 0, 8);
+ }
+
+ /** Creates CAN message with specific content.
+ */
+ CANMessage(int _id, const char *_data, char _len = 8, CANType _type = CANData, CANFormat _format = CANStandard) {
+ len = _len & 0xF;
+ type = _type;
+ format = _format;
+ id = _id;
+ memcpy(data, _data, _len);
+ }
+
+ /** Creates CAN remote message.
+ */
+ CANMessage(int _id, CANFormat _format = CANStandard) {
+ len = 0;
+ type = CANRemote;
+ format = _format;
+ id = _id;
+ memset(data, 0, 8);
+ }
+};
+
+/** A can bus client, used for communicating with can devices
+ */
+class CAN {
+
+public:
+ /** Creates an CAN interface connected to specific pins.
+ *
+ * @param rd read from transmitter
+ * @param td transmit to transmitter
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * Ticker ticker;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ * CAN can1(p9, p10);
+ * CAN can2(p30, p29);
+ *
+ * char counter = 0;
+ *
+ * void send() {
+ * if(can1.write(CANMessage(1337, &counter, 1))) {
+ * printf("Message sent: %d\n", counter);
+ * counter++;
+ * }
+ * led1 = !led1;
+ * }
+ *
+ * int main() {
+ * ticker.attach(&send, 1);
+ * CANMessage msg;
+ * while(1) {
+ * if(can2.read(msg)) {
+ * printf("Message received: %d\n\n", msg.data[0]);
+ * led2 = !led2;
+ * }
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+ CAN(PinName rd, PinName td);
+ virtual ~CAN();
+
+ /** Set the frequency of the CAN interface
+ *
+ * @param hz The bus frequency in hertz
+ *
+ * @returns
+ * 1 if successful,
+ * 0 otherwise
+ */
+ int frequency(int hz);
+
+ /** Write a CANMessage to the bus.
+ *
+ * @param msg The CANMessage to write.
+ *
+ * @returns
+ * 0 if write failed,
+ * 1 if write was successful
+ */
+ int write(CANMessage msg);
+
+ /** Read a CANMessage from the bus.
+ *
+ * @param msg A CANMessage to read to.
+ * @param handle message filter handle (0 for any message)
+ *
+ * @returns
+ * 0 if no message arrived,
+ * 1 if message arrived
+ */
+ int read(CANMessage &msg, int handle = 0);
+
+ /** Reset CAN interface.
+ *
+ * To use after error overflow.
+ */
+ void reset();
+
+ /** Puts or removes the CAN interface into silent monitoring mode
+ *
+ * @param silent boolean indicating whether to go into silent mode or not
+ */
+ void monitor(bool silent);
+
+ enum Mode {
+ Reset = 0,
+ Normal,
+ Silent,
+ LocalTest,
+ GlobalTest,
+ SilentTest
+ };
+
+ /** Change CAN operation to the specified mode
+ *
+ * @param mode The new operation mode (CAN::Normal, CAN::Silent, CAN::LocalTest, CAN::GlobalTest, CAN::SilentTest)
+ *
+ * @returns
+ * 0 if mode change failed or unsupported,
+ * 1 if mode change was successful
+ */
+ int mode(Mode mode);
+
+ /** Filter out incomming messages
+ *
+ * @param id the id to filter on
+ * @param mask the mask applied to the id
+ * @param format format to filter on (Default CANAny)
+ * @param handle message filter handle (Optional)
+ *
+ * @returns
+ * 0 if filter change failed or unsupported,
+ * new filter handle if successful
+ */
+ int filter(unsigned int id, unsigned int mask, CANFormat format = CANAny, int handle = 0);
+
+ /** Returns number of read errors to detect read overflow errors.
+ */
+ unsigned char rderror();
+
+ /** Returns number of write errors to detect write overflow errors.
+ */
+ unsigned char tderror();
+
+ enum IrqType {
+ RxIrq = 0,
+ TxIrq,
+ EwIrq,
+ DoIrq,
+ WuIrq,
+ EpIrq,
+ AlIrq,
+ BeIrq,
+ IdIrq
+ };
+
+ /** Attach a function to call whenever a CAN frame received interrupt is
+ * generated.
+ *
+ * @param fptr A pointer to a void function, or 0 to set as none
+ * @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, CAN::TxIrq for transmitted or aborted, CAN::EwIrq for error warning, CAN::DoIrq for data overrun, CAN::WuIrq for wake-up, CAN::EpIrq for error passive, CAN::AlIrq for arbitration lost, CAN::BeIrq for bus error)
+ */
+ void attach(void (*fptr)(void), IrqType type=RxIrq);
+
+ /** Attach a member function to call whenever a CAN frame received interrupt
+ * is generated.
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, TxIrq for transmitted or aborted, EwIrq for error warning, DoIrq for data overrun, WuIrq for wake-up, EpIrq for error passive, AlIrq for arbitration lost, BeIrq for bus error)
+ */
+ template<typename T>
+ void attach(T* tptr, void (T::*mptr)(void), IrqType type=RxIrq) {
+ if((mptr != NULL) && (tptr != NULL)) {
+ _irq[type].attach(tptr, mptr);
+ can_irq_set(&_can, (CanIrqType)type, 1);
+ }
+ else {
+ can_irq_set(&_can, (CanIrqType)type, 0);
+ }
+ }
+
+ static void _irq_handler(uint32_t id, CanIrqType type);
+
+protected:
+ can_t _can;
+ FunctionPointer _irq[9];
+};
+
+} // namespace mbed
+
+#endif
+
+#endif // MBED_CAN_H
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/CThunk.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,202 @@
+/* General C++ Object Thunking class
+ *
+ * - allows direct callbacks to non-static C++ class functions
+ * - keeps track for the corresponding class instance
+ * - supports an optional context parameter for the called function
+ * - ideally suited for class object receiving interrupts (NVIC_SetVector)
+ *
+ * Copyright (c) 2014-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef __CTHUNK_H__
+#define __CTHUNK_H__
+
+#define CTHUNK_ADDRESS 1
+
+#if defined(__CORTEX_M3) || defined(__CORTEX_M4) || defined(__thumb2__)
+#define CTHUNK_VARIABLES volatile uint32_t code[1]
+/**
+* CTHUNK disassembly for Cortex-M3/M4 (thumb2):
+* * ldm.w pc,{r0,r1,r2,pc}
+*
+* This instruction loads the arguments for the static thunking function to r0-r2, and
+* branches to that function by loading its address into PC.
+*
+* This is safe for both regular calling and interrupt calling, since it only touches scratch registers
+* which should be saved by the caller, and are automatically saved as part of the IRQ context switch.
+*/
+#define CTHUNK_ASSIGMENT m_thunk.code[0] = 0x8007E89F
+
+#elif defined(__CORTEX_M0PLUS) || defined(__CORTEX_M0)
+/*
+* CTHUNK disassembly for Cortex M0 (thumb):
+* * push {r0,r1,r2,r3,r4,lr} save touched registers and return address
+* * movs r4,#4 set up address to load arguments from (immediately following this code block) (1)
+* * add r4,pc set up address to load arguments from (immediately following this code block) (2)
+* * ldm r4!,{r0,r1,r2,r3} load arguments for static thunk function
+* * blx r3 call static thunk function
+* * pop {r0,r1,r2,r3,r4,pc} restore scratch registers and return from function
+*/
+#define CTHUNK_VARIABLES volatile uint32_t code[3]
+#define CTHUNK_ASSIGMENT do { \
+ m_thunk.code[0] = 0x2404B51F; \
+ m_thunk.code[1] = 0xCC0F447C; \
+ m_thunk.code[2] = 0xBD1F4798; \
+ } while (0)
+
+#else
+#error "Target is not currently suported."
+#endif
+
+/* IRQ/Exception compatible thunk entry function */
+typedef void (*CThunkEntry)(void);
+
+template<class T>
+class CThunk
+{
+ public:
+ typedef void (T::*CCallbackSimple)(void);
+ typedef void (T::*CCallback)(void* context);
+
+ inline CThunk(T *instance)
+ {
+ init(instance, NULL, NULL);
+ }
+
+ inline CThunk(T *instance, CCallback callback)
+ {
+ init(instance, callback, NULL);
+ }
+
+ ~CThunk() {
+
+ }
+
+ inline CThunk(T *instance, CCallbackSimple callback)
+ {
+ init(instance, (CCallback)callback, NULL);
+ }
+
+ inline CThunk(T &instance, CCallback callback)
+ {
+ init(instance, callback, NULL);
+ }
+
+ inline CThunk(T &instance, CCallbackSimple callback)
+ {
+ init(instance, (CCallback)callback, NULL);
+ }
+
+ inline CThunk(T &instance, CCallback callback, void* context)
+ {
+ init(instance, callback, context);
+ }
+
+ inline void callback(CCallback callback)
+ {
+ m_callback = callback;
+ }
+
+ inline void callback(CCallbackSimple callback)
+ {
+ m_callback = (CCallback)callback;
+ }
+
+ inline void context(void* context)
+ {
+ m_thunk.context = (uint32_t)context;
+ }
+
+ inline void context(uint32_t context)
+ {
+ m_thunk.context = context;
+ }
+
+ inline uint32_t entry(void)
+ {
+ return (((uint32_t)&m_thunk)|CTHUNK_ADDRESS);
+ }
+
+ /* get thunk entry point for connecting rhunk to an IRQ table */
+ inline operator CThunkEntry(void)
+ {
+ return (CThunkEntry)entry();
+ }
+
+ /* get thunk entry point for connecting rhunk to an IRQ table */
+ inline operator uint32_t(void)
+ {
+ return entry();
+ }
+
+ /* simple test function */
+ inline void call(void)
+ {
+ (((CThunkEntry)(entry()))());
+ }
+
+ private:
+ T* m_instance;
+ volatile CCallback m_callback;
+
+// TODO: this needs proper fix, to refactor toolchain header file and all its use
+// PACKED there is not defined properly for IAR
+#if defined (__ICCARM__)
+ typedef __packed struct
+ {
+ CTHUNK_VARIABLES;
+ volatile uint32_t instance;
+ volatile uint32_t context;
+ volatile uint32_t callback;
+ volatile uint32_t trampoline;
+ } CThunkTrampoline;
+#else
+ typedef struct
+ {
+ CTHUNK_VARIABLES;
+ volatile uint32_t instance;
+ volatile uint32_t context;
+ volatile uint32_t callback;
+ volatile uint32_t trampoline;
+ } __attribute__((__packed__)) CThunkTrampoline;
+#endif
+
+ static void trampoline(T* instance, void* context, CCallback* callback)
+ {
+ if(instance && *callback) {
+ (static_cast<T*>(instance)->**callback)(context);
+ }
+ }
+
+ volatile CThunkTrampoline m_thunk;
+
+ inline void init(T *instance, CCallback callback, void* context)
+ {
+ /* remember callback - need to add this level of redirection
+ as pointer size for member functions differs between platforms */
+ m_callback = callback;
+
+ /* populate thunking trampoline */
+ CTHUNK_ASSIGMENT;
+ m_thunk.context = (uint32_t)context;
+ m_thunk.instance = (uint32_t)instance;
+ m_thunk.callback = (uint32_t)&m_callback;
+ m_thunk.trampoline = (uint32_t)&trampoline;
+
+ __ISB();
+ __DSB();
+ }
+};
+
+#endif/*__CTHUNK_H__*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/CallChain.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,181 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CALLCHAIN_H
+#define MBED_CALLCHAIN_H
+
+#include "FunctionPointer.h"
+#include <string.h>
+
+namespace mbed {
+
+/** Group one or more functions in an instance of a CallChain, then call them in
+ * sequence using CallChain::call(). Used mostly by the interrupt chaining code,
+ * but can be used for other purposes.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * CallChain chain;
+ *
+ * void first(void) {
+ * printf("'first' function.\n");
+ * }
+ *
+ * void second(void) {
+ * printf("'second' function.\n");
+ * }
+ *
+ * class Test {
+ * public:
+ * void f(void) {
+ * printf("A::f (class member).\n");
+ * }
+ * };
+ *
+ * int main() {
+ * Test test;
+ *
+ * chain.add(second);
+ * chain.add_front(first);
+ * chain.add(&test, &Test::f);
+ * chain.call();
+ * }
+ * @endcode
+ */
+
+typedef FunctionPointer* pFunctionPointer_t;
+
+class CallChain {
+public:
+ /** Create an empty chain
+ *
+ * @param size (optional) Initial size of the chain
+ */
+ CallChain(int size = 4);
+ virtual ~CallChain();
+
+ /** Add a function at the end of the chain
+ *
+ * @param function A pointer to a void function
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add(void (*function)(void));
+
+ /** Add a function at the end of the chain
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add(T *tptr, void (T::*mptr)(void)) {
+ return common_add(new FunctionPointer(tptr, mptr));
+ }
+
+ /** Add a function at the beginning of the chain
+ *
+ * @param function A pointer to a void function
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add_front(void (*function)(void));
+
+ /** Add a function at the beginning of the chain
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add_front(T *tptr, void (T::*mptr)(void)) {
+ return common_add_front(new FunctionPointer(tptr, mptr));
+ }
+
+ /** Get the number of functions in the chain
+ */
+ int size() const;
+
+ /** Get a function object from the chain
+ *
+ * @param i function object index
+ *
+ * @returns
+ * The function object at position 'i' in the chain
+ */
+ pFunctionPointer_t get(int i) const;
+
+ /** Look for a function object in the call chain
+ *
+ * @param f the function object to search
+ *
+ * @returns
+ * The index of the function object if found, -1 otherwise.
+ */
+ int find(pFunctionPointer_t f) const;
+
+ /** Clear the call chain (remove all functions in the chain).
+ */
+ void clear();
+
+ /** Remove a function object from the chain
+ *
+ * @arg f the function object to remove
+ *
+ * @returns
+ * true if the function object was found and removed, false otherwise.
+ */
+ bool remove(pFunctionPointer_t f);
+
+ /** Call all the functions in the chain in sequence
+ */
+ void call();
+
+#ifdef MBED_OPERATORS
+ void operator ()(void) {
+ call();
+ }
+ pFunctionPointer_t operator [](int i) const {
+ return get(i);
+ }
+#endif
+
+private:
+ void _check_size();
+ pFunctionPointer_t common_add(pFunctionPointer_t pf);
+ pFunctionPointer_t common_add_front(pFunctionPointer_t pf);
+
+ pFunctionPointer_t* _chain;
+ int _size;
+ int _elements;
+
+ /* disallow copy constructor and assignment operators */
+private:
+ CallChain(const CallChain&);
+ CallChain & operator = (const CallChain&);
+};
+
+} // namespace mbed
+
+#endif
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/CircularBuffer.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,98 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CIRCULARBUFFER_H
+#define MBED_CIRCULARBUFFER_H
+
+namespace mbed {
+
+/** Templated Circular buffer class
+ */
+template<typename T, uint32_t BufferSize, typename CounterType = uint32_t>
+class CircularBuffer {
+public:
+ CircularBuffer() : _head(0), _tail(0), _full(false) {
+ }
+
+ ~CircularBuffer() {
+ }
+
+ /** Push the transaction to the buffer. This overwrites the buffer if it's
+ * full
+ *
+ * @param data Data to be pushed to the buffer
+ */
+ void push(const T& data) {
+ if (full()) {
+ _tail++;
+ _tail %= BufferSize;
+ }
+ _pool[_head++] = data;
+ _head %= BufferSize;
+ if (_head == _tail) {
+ _full = true;
+ }
+ }
+
+ /** Pop the transaction from the buffer
+ *
+ * @param data Data to be pushed to the buffer
+ * @return True if the buffer is not empty and data contains a transaction, false otherwise
+ */
+ bool pop(T& data) {
+ if (!empty()) {
+ data = _pool[_tail++];
+ _tail %= BufferSize;
+ _full = false;
+ return true;
+ }
+ return false;
+ }
+
+ /** Check if the buffer is empty
+ *
+ * @return True if the buffer is empty, false if not
+ */
+ bool empty() {
+ return (_head == _tail) && !_full;
+ }
+
+ /** Check if the buffer is full
+ *
+ * @return True if the buffer is full, false if not
+ */
+ bool full() {
+ return _full;
+ }
+
+ /** Reset the buffer
+ *
+ */
+ void reset() {
+ _head = 0;
+ _tail = 0;
+ _full = false;
+ }
+
+private:
+ T _pool[BufferSize];
+ volatile CounterType _head;
+ volatile CounterType _tail;
+ volatile bool _full;
+};
+
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/DigitalIn.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,107 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALIN_H
+#define MBED_DIGITALIN_H
+
+#include "platform.h"
+
+#include "gpio_api.h"
+
+namespace mbed {
+
+/** A digital input, used for reading the state of a pin
+ *
+ * Example:
+ * @code
+ * // Flash an LED while a DigitalIn is true
+ *
+ * #include "mbed.h"
+ *
+ * DigitalIn enable(p5);
+ * DigitalOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * if(enable) {
+ * led = !led;
+ * }
+ * wait(0.25);
+ * }
+ * }
+ * @endcode
+ */
+class DigitalIn {
+
+public:
+ /** Create a DigitalIn connected to the specified pin
+ *
+ * @param pin DigitalIn pin to connect to
+ */
+ DigitalIn(PinName pin) : gpio() {
+ gpio_init_in(&gpio, pin);
+ }
+
+ /** Create a DigitalIn connected to the specified pin
+ *
+ * @param pin DigitalIn pin to connect to
+ * @param mode the initial mode of the pin
+ */
+ DigitalIn(PinName pin, PinMode mode) : gpio() {
+ gpio_init_in_ex(&gpio, pin, mode);
+ }
+ /** Read the input, represented as 0 or 1 (int)
+ *
+ * @returns
+ * An integer representing the state of the input pin,
+ * 0 for logical 0, 1 for logical 1
+ */
+ int read() {
+ return gpio_read(&gpio);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode pull) {
+ gpio_mode(&gpio, pull);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * Non zero value if pin is connected to uc GPIO
+ * 0 if gpio object was initialized with NC
+ */
+ int is_connected() {
+ return gpio_is_connected(&gpio);
+ }
+
+#ifdef MBED_OPERATORS
+ /** An operator shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+#endif
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/DigitalInOut.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,124 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALINOUT_H
+#define MBED_DIGITALINOUT_H
+
+#include "platform.h"
+
+#include "gpio_api.h"
+
+namespace mbed {
+
+/** A digital input/output, used for setting or reading a bi-directional pin
+ */
+class DigitalInOut {
+
+public:
+ /** Create a DigitalInOut connected to the specified pin
+ *
+ * @param pin DigitalInOut pin to connect to
+ */
+ DigitalInOut(PinName pin) : gpio() {
+ gpio_init_in(&gpio, pin);
+ }
+
+ /** Create a DigitalInOut connected to the specified pin
+ *
+ * @param pin DigitalInOut pin to connect to
+ * @param direction the initial direction of the pin
+ * @param mode the initial mode of the pin
+ * @param value the initial value of the pin if is an output
+ */
+ DigitalInOut(PinName pin, PinDirection direction, PinMode mode, int value) : gpio() {
+ gpio_init_inout(&gpio, pin, direction, mode, value);
+ }
+
+ /** Set the output, specified as 0 or 1 (int)
+ *
+ * @param value An integer specifying the pin output value,
+ * 0 for logical 0, 1 (or any other non-zero value) for logical 1
+ */
+ void write(int value) {
+ gpio_write(&gpio, value);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * an integer representing the output setting of the pin if it is an output,
+ * or read the input if set as an input
+ */
+ int read() {
+ return gpio_read(&gpio);
+ }
+
+ /** Set as an output
+ */
+ void output() {
+ gpio_dir(&gpio, PIN_OUTPUT);
+ }
+
+ /** Set as an input
+ */
+ void input() {
+ gpio_dir(&gpio, PIN_INPUT);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode pull) {
+ gpio_mode(&gpio, pull);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * Non zero value if pin is connected to uc GPIO
+ * 0 if gpio object was initialized with NC
+ */
+ int is_connected() {
+ return gpio_is_connected(&gpio);
+ }
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for write()
+ */
+ DigitalInOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ DigitalInOut& operator= (DigitalInOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+#endif
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/DigitalOut.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,116 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALOUT_H
+#define MBED_DIGITALOUT_H
+
+#include "platform.h"
+#include "gpio_api.h"
+
+namespace mbed {
+
+/** A digital output, used for setting the state of a pin
+ *
+ * Example:
+ * @code
+ * // Toggle a LED
+ * #include "mbed.h"
+ *
+ * DigitalOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * led = !led;
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class DigitalOut {
+
+public:
+ /** Create a DigitalOut connected to the specified pin
+ *
+ * @param pin DigitalOut pin to connect to
+ */
+ DigitalOut(PinName pin) : gpio() {
+ gpio_init_out(&gpio, pin);
+ }
+
+ /** Create a DigitalOut connected to the specified pin
+ *
+ * @param pin DigitalOut pin to connect to
+ * @param value the initial pin value
+ */
+ DigitalOut(PinName pin, int value) : gpio() {
+ gpio_init_out_ex(&gpio, pin, value);
+ }
+
+ /** Set the output, specified as 0 or 1 (int)
+ *
+ * @param value An integer specifying the pin output value,
+ * 0 for logical 0, 1 (or any other non-zero value) for logical 1
+ */
+ void write(int value) {
+ gpio_write(&gpio, value);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * an integer representing the output setting of the pin,
+ * 0 for logical 0, 1 for logical 1
+ */
+ int read() {
+ return gpio_read(&gpio);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * Non zero value if pin is connected to uc GPIO
+ * 0 if gpio object was initialized with NC
+ */
+ int is_connected() {
+ return gpio_is_connected(&gpio);
+ }
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for write()
+ */
+ DigitalOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ DigitalOut& operator= (DigitalOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+#endif
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/DirHandle.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIRHANDLE_H
+#define MBED_DIRHANDLE_H
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+# define NAME_MAX 255
+typedef int mode_t;
+
+#else
+# include <sys/syslimits.h>
+#endif
+
+#include "FileHandle.h"
+
+struct dirent {
+ char d_name[NAME_MAX+1];
+};
+
+namespace mbed {
+
+/** Represents a directory stream. Objects of this type are returned
+ * by a FileSystemLike's opendir method. Implementations must define
+ * at least closedir, readdir and rewinddir.
+ *
+ * If a FileSystemLike class defines the opendir method, then the
+ * directories of an object of that type can be accessed by
+ * DIR *d = opendir("/example/directory") (or opendir("/example")
+ * to open the root of the filesystem), and then using readdir(d) etc.
+ *
+ * The root directory is considered to contain all FileLike and
+ * FileSystemLike objects, so the DIR* returned by opendir("/") will
+ * reflect this.
+ */
+class DirHandle {
+
+public:
+ /** Closes the directory.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on error.
+ */
+ virtual int closedir()=0;
+
+ /** Return the directory entry at the current position, and
+ * advances the position to the next entry.
+ *
+ * @returns
+ * A pointer to a dirent structure representing the
+ * directory entry at the current position, or NULL on reaching
+ * end of directory or error.
+ */
+ virtual struct dirent *readdir()=0;
+
+ /** Resets the position to the beginning of the directory.
+ */
+ virtual void rewinddir()=0;
+
+ /** Returns the current position of the DirHandle.
+ *
+ * @returns
+ * the current position,
+ * -1 on error.
+ */
+ virtual off_t telldir() { return -1; }
+
+ /** Sets the position of the DirHandle.
+ *
+ * @param location The location to seek to. Must be a value returned by telldir.
+ */
+ virtual void seekdir(off_t location) { }
+
+ virtual ~DirHandle() {}
+};
+
+} // namespace mbed
+
+typedef mbed::DirHandle DIR;
+
+extern "C" {
+ DIR *opendir(const char*);
+ struct dirent *readdir(DIR *);
+ int closedir(DIR*);
+ void rewinddir(DIR*);
+ long telldir(DIR*);
+ void seekdir(DIR*, long);
+ int mkdir(const char *name, mode_t n);
+};
+
+#endif /* MBED_DIRHANDLE_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Ethernet.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,170 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ETHERNET_H
+#define MBED_ETHERNET_H
+
+#include "platform.h"
+
+#if DEVICE_ETHERNET
+
+namespace mbed {
+
+/** An ethernet interface, to use with the ethernet pins.
+ *
+ * Example:
+ * @code
+ * // Read destination and source from every ethernet packet
+ *
+ * #include "mbed.h"
+ *
+ * Ethernet eth;
+ *
+ * int main() {
+ * char buf[0x600];
+ *
+ * while(1) {
+ * int size = eth.receive();
+ * if(size > 0) {
+ * eth.read(buf, size);
+ * printf("Destination: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ * buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+ * printf("Source: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ * buf[6], buf[7], buf[8], buf[9], buf[10], buf[11]);
+ * }
+ *
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+class Ethernet {
+
+public:
+
+ /** Initialise the ethernet interface.
+ */
+ Ethernet();
+
+ /** Powers the hardware down.
+ */
+ virtual ~Ethernet();
+
+ enum Mode {
+ AutoNegotiate,
+ HalfDuplex10,
+ FullDuplex10,
+ HalfDuplex100,
+ FullDuplex100
+ };
+
+ /** Writes into an outgoing ethernet packet.
+ *
+ * It will append size bytes of data to the previously written bytes.
+ *
+ * @param data An array to write.
+ * @param size The size of data.
+ *
+ * @returns
+ * The number of written bytes.
+ */
+ int write(const char *data, int size);
+
+ /** Send an outgoing ethernet packet.
+ *
+ * After filling in the data in an ethernet packet it must be send.
+ * Send will provide a new packet to write to.
+ *
+ * @returns
+ * 0 if the sending was failed,
+ * or the size of the packet successfully sent.
+ */
+ int send();
+
+ /** Recevies an arrived ethernet packet.
+ *
+ * Receiving an ethernet packet will drop the last received ethernet packet
+ * and make a new ethernet packet ready to read.
+ * If no ethernet packet is arrived it will return 0.
+ *
+ * @returns
+ * 0 if no ethernet packet is arrived,
+ * or the size of the arrived packet.
+ */
+ int receive();
+
+ /** Read from an recevied ethernet packet.
+ *
+ * After receive returnd a number bigger than 0it is
+ * possible to read bytes from this packet.
+ * Read will write up to size bytes into data.
+ *
+ * It is possible to use read multible times.
+ * Each time read will start reading after the last read byte before.
+ *
+ * @returns
+ * The number of byte read.
+ */
+ int read(char *data, int size);
+
+ /** Gives the ethernet address of the mbed.
+ *
+ * @param mac Must be a pointer to a 6 byte char array to copy the ethernet address in.
+ */
+ void address(char *mac);
+
+ /** Returns if an ethernet link is pressent or not. It takes a wile after Ethernet initializion to show up.
+ *
+ * @returns
+ * 0 if no ethernet link is pressent,
+ * 1 if an ethernet link is pressent.
+ *
+ * Example:
+ * @code
+ * // Using the Ethernet link function
+ * #include "mbed.h"
+ *
+ * Ethernet eth;
+ *
+ * int main() {
+ * wait(1); // Needed after startup.
+ * if (eth.link()) {
+ * printf("online\n");
+ * } else {
+ * printf("offline\n");
+ * }
+ * }
+ * @endcode
+ */
+ int link();
+
+ /** Sets the speed and duplex parameters of an ethernet link
+ *
+ * - AutoNegotiate Auto negotiate speed and duplex
+ * - HalfDuplex10 10 Mbit, half duplex
+ * - FullDuplex10 10 Mbit, full duplex
+ * - HalfDuplex100 100 Mbit, half duplex
+ * - FullDuplex100 100 Mbit, full duplex
+ *
+ * @param mode the speed and duplex mode to set the link to:
+ */
+ void set_link(Mode mode);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FileBase.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,80 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEBASE_H
+#define MBED_FILEBASE_H
+
+typedef int FILEHANDLE;
+
+#include <stdio.h>
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+# define O_RDONLY 0
+# define O_WRONLY 1
+# define O_RDWR 2
+# define O_CREAT 0x0200
+# define O_TRUNC 0x0400
+# define O_APPEND 0x0008
+
+# define NAME_MAX 255
+
+typedef int mode_t;
+typedef int ssize_t;
+typedef long off_t;
+
+#else
+# include <sys/fcntl.h>
+# include <sys/types.h>
+# include <sys/syslimits.h>
+#endif
+
+#include "platform.h"
+
+namespace mbed {
+
+typedef enum {
+ FilePathType,
+ FileSystemPathType
+} PathType;
+
+class FileBase {
+public:
+ FileBase(const char *name, PathType t);
+
+ virtual ~FileBase();
+
+ const char* getName(void);
+ PathType getPathType(void);
+
+ static FileBase *lookup(const char *name, unsigned int len);
+
+ static FileBase *get(int n);
+
+protected:
+ static FileBase *_head;
+
+ FileBase *_next;
+ const char *_name;
+ PathType _path_type;
+
+ /* disallow copy constructor and assignment operators */
+private:
+ FileBase(const FileBase&);
+ FileBase & operator = (const FileBase&);
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FileHandle.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,119 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEHANDLE_H
+#define MBED_FILEHANDLE_H
+
+typedef int FILEHANDLE;
+
+#include <stdio.h>
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+typedef int ssize_t;
+typedef long off_t;
+
+#else
+# include <sys/types.h>
+#endif
+
+namespace mbed {
+
+/** An OO equivalent of the internal FILEHANDLE variable
+ * and associated _sys_* functions.
+ *
+ * FileHandle is an abstract class, needing at least sys_write and
+ * sys_read to be implmented for a simple interactive device.
+ *
+ * No one ever directly tals to/instanciates a FileHandle - it gets
+ * created by FileSystem, and wrapped up by stdio.
+ */
+class FileHandle {
+
+public:
+ /** Write the contents of a buffer to the file
+ *
+ * @param buffer the buffer to write from
+ * @param length the number of characters to write
+ *
+ * @returns
+ * The number of characters written (possibly 0) on success, -1 on error.
+ */
+ virtual ssize_t write(const void* buffer, size_t length) = 0;
+
+ /** Close the file
+ *
+ * @returns
+ * Zero on success, -1 on error.
+ */
+ virtual int close() = 0;
+
+ /** Function read
+ * Reads the contents of the file into a buffer
+ *
+ * @param buffer the buffer to read in to
+ * @param length the number of characters to read
+ *
+ * @returns
+ * The number of characters read (zero at end of file) on success, -1 on error.
+ */
+ virtual ssize_t read(void* buffer, size_t length) = 0;
+
+ /** Check if the handle is for a interactive terminal device.
+ * If so, line buffered behaviour is used by default
+ *
+ * @returns
+ * 1 if it is a terminal,
+ * 0 otherwise
+ */
+ virtual int isatty() = 0;
+
+ /** Move the file position to a given offset from a given location.
+ *
+ * @param offset The offset from whence to move to
+ * @param whence SEEK_SET for the start of the file, SEEK_CUR for the
+ * current file position, or SEEK_END for the end of the file.
+ *
+ * @returns
+ * new file position on success,
+ * -1 on failure or unsupported
+ */
+ virtual off_t lseek(off_t offset, int whence) = 0;
+
+ /** Flush any buffers associated with the FileHandle, ensuring it
+ * is up to date on disk
+ *
+ * @returns
+ * 0 on success or un-needed,
+ * -1 on error
+ */
+ virtual int fsync() = 0;
+
+ virtual off_t flen() {
+ /* remember our current position */
+ off_t pos = lseek(0, SEEK_CUR);
+ if(pos == -1) return -1;
+ /* seek to the end to get the file length */
+ off_t res = lseek(0, SEEK_END);
+ /* return to our old position */
+ lseek(pos, SEEK_SET);
+ return res;
+ }
+
+ virtual ~FileHandle();
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FileLike.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,44 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILELIKE_H
+#define MBED_FILELIKE_H
+
+#include "FileBase.h"
+#include "FileHandle.h"
+
+namespace mbed {
+
+/* Class FileLike
+ * A file-like object is one that can be opened with fopen by
+ * fopen("/name", mode). It is intersection of the classes Base and
+ * FileHandle.
+ */
+class FileLike : public FileHandle, public FileBase {
+
+public:
+ /* Constructor FileLike
+ *
+ * Variables
+ * name - The name to use to open the file.
+ */
+ FileLike(const char *name);
+
+ virtual ~FileLike();
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FilePath.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,46 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEPATH_H
+#define MBED_FILEPATH_H
+
+#include "platform.h"
+
+#include "FileSystemLike.h"
+#include "FileLike.h"
+
+namespace mbed {
+
+class FilePath {
+public:
+ FilePath(const char* file_path);
+
+ const char* fileName(void);
+
+ bool isFileSystem(void);
+ FileSystemLike* fileSystem(void);
+
+ bool isFile(void);
+ FileLike* file(void);
+ bool exists(void);
+
+private:
+ const char* file_name;
+ FileBase* fb;
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FileSystemLike.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILESYSTEMLIKE_H
+#define MBED_FILESYSTEMLIKE_H
+
+#include "platform.h"
+
+#include "FileBase.h"
+#include "FileHandle.h"
+#include "DirHandle.h"
+
+namespace mbed {
+
+/** A filesystem-like object is one that can be used to open files
+ * though it by fopen("/name/filename", mode)
+ *
+ * Implementations must define at least open (the default definitions
+ * of the rest of the functions just return error values).
+ */
+class FileSystemLike : public FileBase {
+
+public:
+ /** FileSystemLike constructor
+ *
+ * @param name The name to use for the filesystem.
+ */
+ FileSystemLike(const char *name);
+
+ virtual ~FileSystemLike();
+
+ static DirHandle *opendir();
+ friend class BaseDirHandle;
+
+ /** Opens a file from the filesystem
+ *
+ * @param filename The name of the file to open.
+ * @param flags One of O_RDONLY, O_WRONLY, or O_RDWR, OR'd with
+ * zero or more of O_CREAT, O_TRUNC, or O_APPEND.
+ *
+ * @returns
+ * A pointer to a FileHandle object representing the
+ * file on success, or NULL on failure.
+ */
+ virtual FileHandle *open(const char *filename, int flags) = 0;
+
+ /** Remove a file from the filesystem.
+ *
+ * @param filename the name of the file to remove.
+ * @param returns 0 on success, -1 on failure.
+ */
+ virtual int remove(const char *filename) { return -1; };
+
+ /** Rename a file in the filesystem.
+ *
+ * @param oldname the name of the file to rename.
+ * @param newname the name to rename it to.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on failure.
+ */
+ virtual int rename(const char *oldname, const char *newname) { return -1; };
+
+ /** Opens a directory in the filesystem and returns a DirHandle
+ * representing the directory stream.
+ *
+ * @param name The name of the directory to open.
+ *
+ * @returns
+ * A DirHandle representing the directory stream, or
+ * NULL on failure.
+ */
+ virtual DirHandle *opendir(const char *name) { return NULL; };
+
+ /** Creates a directory in the filesystem.
+ *
+ * @param name The name of the directory to create.
+ * @param mode The permissions to create the directory with.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on failure.
+ */
+ virtual int mkdir(const char *name, mode_t mode) { return -1; }
+
+ // TODO other filesystem functions (mkdir, rm, rn, ls etc)
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FunctionPointer.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,202 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FUNCTIONPOINTER_H
+#define MBED_FUNCTIONPOINTER_H
+
+#include <string.h>
+#include <stdint.h>
+
+namespace mbed {
+
+/* If we had variaditic templates, this wouldn't be a problem, but until C++11 is enabled, we are stuck with multiple classes... */
+
+/** A class for storing and calling a pointer to a static or member function
+ */
+template <typename R, typename A1>
+class FunctionPointerArg1{
+public:
+ /** Create a FunctionPointer, attaching a static function
+ *
+ * @param function The static function to attach (default is none)
+ */
+ FunctionPointerArg1(R (*function)(A1) = 0) {
+ attach(function);
+ }
+
+ /** Create a FunctionPointer, attaching a member function
+ *
+ * @param object The object pointer to invoke the member function on (i.e. the this pointer)
+ * @param function The address of the member function to attach
+ */
+ template<typename T>
+ FunctionPointerArg1(T *object, R (T::*member)(A1)) {
+ attach(object, member);
+ }
+
+ /** Attach a static function
+ *
+ * @param function The static function to attach (default is none)
+ */
+ void attach(R (*function)(A1)) {
+ _p.function = function;
+ _membercaller = 0;
+ }
+
+ /** Attach a member function
+ *
+ * @param object The object pointer to invoke the member function on (i.e. the this pointer)
+ * @param function The address of the member function to attach
+ */
+ template<typename T>
+ void attach(T *object, R (T::*member)(A1)) {
+ _p.object = static_cast<void*>(object);
+ *reinterpret_cast<R (T::**)(A1)>(_member) = member;
+ _membercaller = &FunctionPointerArg1::membercaller<T>;
+ }
+
+ /** Call the attached static or member function
+ */
+ R call(A1 a) {
+ if (_membercaller == 0 && _p.function) {
+ return _p.function(a);
+ } else if (_membercaller && _p.object) {
+ return _membercaller(_p.object, _member, a);
+ }
+ return (R)0;
+ }
+
+ /** Get registered static function
+ */
+ R(*get_function(A1))() {
+ return _membercaller ? (R(*)(A1))0 : (R(*)(A1))_p.function;
+ }
+
+#ifdef MBED_OPERATORS
+ R operator ()(A1 a) {
+ return call(a);
+ }
+ operator bool(void) const {
+ return (_membercaller != NULL ? _p.object : (void*)_p.function) != NULL;
+ }
+#endif
+private:
+ template<typename T>
+ static R membercaller(void *object, uintptr_t *member, A1 a) {
+ T* o = static_cast<T*>(object);
+ R (T::**m)(A1) = reinterpret_cast<R (T::**)(A1)>(member);
+ return (o->**m)(a);
+ }
+
+ union {
+ R (*function)(A1); // static function pointer
+ void *object; // object this pointer
+ } _p;
+ uintptr_t _member[4]; // aligned raw member function pointer storage - converted back by registered _membercaller
+ R (*_membercaller)(void*, uintptr_t*, A1); // registered membercaller function to convert back and call _m.member on _object
+};
+
+/** A class for storing and calling a pointer to a static or member function (R ()(void))
+ */
+template <typename R>
+class FunctionPointerArg1<R, void>{
+public:
+ /** Create a FunctionPointer, attaching a static function
+ *
+ * @param function The static function to attach (default is none)
+ */
+ FunctionPointerArg1(R (*function)(void) = 0) {
+ attach(function);
+ }
+
+ /** Create a FunctionPointer, attaching a member function
+ *
+ * @param object The object pointer to invoke the member function on (i.e. the this pointer)
+ * @param function The address of the void member function to attach
+ */
+ template<typename T>
+ FunctionPointerArg1(T *object, R (T::*member)(void)) {
+ attach(object, member);
+ }
+
+ /** Attach a static function
+ *
+ * @param function The void static function to attach (default is none)
+ */
+ void attach(R (*function)(void)) {
+ _p.function = function;
+ _membercaller = 0;
+ }
+
+ /** Attach a member function
+ *
+ * @param object The object pointer to invoke the member function on (i.e. the this pointer)
+ * @param function The address of the void member function to attach
+ */
+ template<typename T>
+ void attach(T *object, R (T::*member)(void)) {
+ _p.object = static_cast<void*>(object);
+ *reinterpret_cast<R (T::**)(void)>(_member) = member;
+ _membercaller = &FunctionPointerArg1::membercaller<T>;
+ }
+
+ /** Call the attached static or member function
+ */
+ R call(){
+ if (_membercaller == 0 && _p.function) {
+ return _p.function();
+ } else if (_membercaller && _p.object) {
+ return _membercaller(_p.object, _member);
+ }
+ return (R)0;
+ }
+
+ /** Get registered static function
+ */
+ R(*get_function())() {
+ return _membercaller ? (R(*)())0 : (R(*)())_p.function;
+ }
+
+#ifdef MBED_OPERATORS
+ R operator ()(void) {
+ return call();
+ }
+ operator bool(void) const {
+ return (_membercaller != NULL ? _p.object : (void*)_p.function) != NULL;
+ }
+#endif
+
+private:
+ template<typename T>
+ static R membercaller(void *object, uintptr_t *member) {
+ T* o = static_cast<T*>(object);
+ R (T::**m)(void) = reinterpret_cast<R (T::**)(void)>(member);
+ return (o->**m)();
+ }
+
+ union {
+ R (*function)(void); // static function pointer
+ void *object; // object this pointer
+ } _p;
+ uintptr_t _member[4]; // aligned raw member function pointer storage - converted back by registered _membercaller
+ R (*_membercaller)(void*, uintptr_t*); // registered membercaller function to convert back and call _m.member on _object
+};
+
+typedef FunctionPointerArg1<void, void> FunctionPointer;
+typedef FunctionPointerArg1<void, int> event_callback_t;
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/I2C.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,176 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_H
+#define MBED_I2C_H
+
+#include "platform.h"
+
+#if DEVICE_I2C
+
+#include "i2c_api.h"
+
+#if DEVICE_I2C_ASYNCH
+#include "CThunk.h"
+#include "dma_api.h"
+#include "FunctionPointer.h"
+#endif
+
+namespace mbed {
+
+/** An I2C Master, used for communicating with I2C slave devices
+ *
+ * Example:
+ * @code
+ * // Read from I2C slave at address 0x62
+ *
+ * #include "mbed.h"
+ *
+ * I2C i2c(p28, p27);
+ *
+ * int main() {
+ * int address = 0x62;
+ * char data[2];
+ * i2c.read(address, data, 2);
+ * }
+ * @endcode
+ */
+class I2C {
+
+public:
+ enum RxStatus {
+ NoData,
+ MasterGeneralCall,
+ MasterWrite,
+ MasterRead
+ };
+
+ enum Acknowledge {
+ NoACK = 0,
+ ACK = 1
+ };
+
+ /** Create an I2C Master interface, connected to the specified pins
+ *
+ * @param sda I2C data line pin
+ * @param scl I2C clock line pin
+ */
+ I2C(PinName sda, PinName scl);
+
+ /** Set the frequency of the I2C interface
+ *
+ * @param hz The bus frequency in hertz
+ */
+ void frequency(int hz);
+
+ /** Read from an I2C slave
+ *
+ * Performs a complete read transaction. The bottom bit of
+ * the address is forced to 1 to indicate a read.
+ *
+ * @param address 8-bit I2C slave address [ addr | 1 ]
+ * @param data Pointer to the byte-array to read data in to
+ * @param length Number of bytes to read
+ * @param repeated Repeated start, true - don't send stop at end
+ *
+ * @returns
+ * 0 on success (ack),
+ * non-0 on failure (nack)
+ */
+ int read(int address, char *data, int length, bool repeated = false);
+
+ /** Read a single byte from the I2C bus
+ *
+ * @param ack indicates if the byte is to be acknowledged (1 = acknowledge)
+ *
+ * @returns
+ * the byte read
+ */
+ int read(int ack);
+
+ /** Write to an I2C slave
+ *
+ * Performs a complete write transaction. The bottom bit of
+ * the address is forced to 0 to indicate a write.
+ *
+ * @param address 8-bit I2C slave address [ addr | 0 ]
+ * @param data Pointer to the byte-array data to send
+ * @param length Number of bytes to send
+ * @param repeated Repeated start, true - do not send stop at end
+ *
+ * @returns
+ * 0 on success (ack),
+ * non-0 on failure (nack)
+ */
+ int write(int address, const char *data, int length, bool repeated = false);
+
+ /** Write single byte out on the I2C bus
+ *
+ * @param data data to write out on bus
+ *
+ * @returns
+ * '1' if an ACK was received,
+ * '0' otherwise
+ */
+ int write(int data);
+
+ /** Creates a start condition on the I2C bus
+ */
+
+ void start(void);
+
+ /** Creates a stop condition on the I2C bus
+ */
+ void stop(void);
+
+#if DEVICE_I2C_ASYNCH
+
+ /** Start non-blocking I2C transfer.
+ *
+ * @param address 8/10 bit I2c slave address
+ * @param tx_buffer The TX buffer with data to be transfered
+ * @param tx_length The length of TX buffer
+ * @param rx_buffer The RX buffer which is used for received data
+ * @param rx_length The length of RX buffer
+ * @param event The logical OR of events to modify
+ * @param callback The event callback function
+ * @param repeated Repeated start, true - do not send stop at end
+ * @return Zero if the transfer has started, or -1 if I2C peripheral is busy
+ */
+ int transfer(int address, char *tx_buffer, int tx_length, char *rx_buffer, int rx_length, const event_callback_t& callback, int event = I2C_EVENT_TRANSFER_COMPLETE, bool repeated = false);
+
+ /** Abort the on-going I2C transfer
+ */
+ void abort_transfer();
+protected:
+ void irq_handler_asynch(void);
+ event_callback_t _callback;
+ CThunk<I2C> _irq;
+ DMAUsage _usage;
+#endif
+
+protected:
+ void aquire();
+
+ i2c_t _i2c;
+ static I2C *_owner;
+ int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/I2CSlave.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,154 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_SLAVE_H
+#define MBED_I2C_SLAVE_H
+
+#include "platform.h"
+
+#if DEVICE_I2CSLAVE
+
+#include "i2c_api.h"
+
+namespace mbed {
+
+/** An I2C Slave, used for communicating with an I2C Master device
+ *
+ * Example:
+ * @code
+ * // Simple I2C responder
+ * #include <mbed.h>
+ *
+ * I2CSlave slave(p9, p10);
+ *
+ * int main() {
+ * char buf[10];
+ * char msg[] = "Slave!";
+ *
+ * slave.address(0xA0);
+ * while (1) {
+ * int i = slave.receive();
+ * switch (i) {
+ * case I2CSlave::ReadAddressed:
+ * slave.write(msg, strlen(msg) + 1); // Includes null char
+ * break;
+ * case I2CSlave::WriteGeneral:
+ * slave.read(buf, 10);
+ * printf("Read G: %s\n", buf);
+ * break;
+ * case I2CSlave::WriteAddressed:
+ * slave.read(buf, 10);
+ * printf("Read A: %s\n", buf);
+ * break;
+ * }
+ * for(int i = 0; i < 10; i++) buf[i] = 0; // Clear buffer
+ * }
+ * }
+ * @endcode
+ */
+class I2CSlave {
+
+public:
+ enum RxStatus {
+ NoData = 0,
+ ReadAddressed = 1,
+ WriteGeneral = 2,
+ WriteAddressed = 3
+ };
+
+ /** Create an I2C Slave interface, connected to the specified pins.
+ *
+ * @param sda I2C data line pin
+ * @param scl I2C clock line pin
+ */
+ I2CSlave(PinName sda, PinName scl);
+
+ /** Set the frequency of the I2C interface
+ *
+ * @param hz The bus frequency in hertz
+ */
+ void frequency(int hz);
+
+ /** Checks to see if this I2C Slave has been addressed.
+ *
+ * @returns
+ * A status indicating if the device has been addressed, and how
+ * - NoData - the slave has not been addressed
+ * - ReadAddressed - the master has requested a read from this slave
+ * - WriteAddressed - the master is writing to this slave
+ * - WriteGeneral - the master is writing to all slave
+ */
+ int receive(void);
+
+ /** Read from an I2C master.
+ *
+ * @param data pointer to the byte array to read data in to
+ * @param length maximum number of bytes to read
+ *
+ * @returns
+ * 0 on success,
+ * non-0 otherwise
+ */
+ int read(char *data, int length);
+
+ /** Read a single byte from an I2C master.
+ *
+ * @returns
+ * the byte read
+ */
+ int read(void);
+
+ /** Write to an I2C master.
+ *
+ * @param data pointer to the byte array to be transmitted
+ * @param length the number of bytes to transmite
+ *
+ * @returns
+ * 0 on success,
+ * non-0 otherwise
+ */
+ int write(const char *data, int length);
+
+ /** Write a single byte to an I2C master.
+ *
+ * @data the byte to write
+ *
+ * @returns
+ * '1' if an ACK was received,
+ * '0' otherwise
+ */
+ int write(int data);
+
+ /** Sets the I2C slave address.
+ *
+ * @param address The address to set for the slave (ignoring the least
+ * signifcant bit). If set to 0, the slave will only respond to the
+ * general call address.
+ */
+ void address(int address);
+
+ /** Reset the I2C slave back into the known ready receiving state.
+ */
+ void stop(void);
+
+protected:
+ i2c_t _i2c;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/InterruptIn.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,135 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_INTERRUPTIN_H
+#define MBED_INTERRUPTIN_H
+
+#include "platform.h"
+
+#if DEVICE_INTERRUPTIN
+
+#include "gpio_api.h"
+#include "gpio_irq_api.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** A digital interrupt input, used to call a function on a rising or falling edge
+ *
+ * Example:
+ * @code
+ * // Flash an LED while waiting for events
+ *
+ * #include "mbed.h"
+ *
+ * InterruptIn event(p16);
+ * DigitalOut led(LED1);
+ *
+ * void trigger() {
+ * printf("triggered!\n");
+ * }
+ *
+ * int main() {
+ * event.rise(&trigger);
+ * while(1) {
+ * led = !led;
+ * wait(0.25);
+ * }
+ * }
+ * @endcode
+ */
+class InterruptIn {
+
+public:
+
+ /** Create an InterruptIn connected to the specified pin
+ *
+ * @param pin InterruptIn pin to connect to
+ * @param name (optional) A string to identify the object
+ */
+ InterruptIn(PinName pin);
+ virtual ~InterruptIn();
+
+ int read();
+#ifdef MBED_OPERATORS
+ operator int();
+
+#endif
+
+ /** Attach a function to call when a rising edge occurs on the input
+ *
+ * @param fptr A pointer to a void function, or 0 to set as none
+ */
+ void rise(void (*fptr)(void));
+
+ /** Attach a member function to call when a rising edge occurs on the input
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ */
+ template<typename T>
+ void rise(T* tptr, void (T::*mptr)(void)) {
+ _rise.attach(tptr, mptr);
+ gpio_irq_set(&gpio_irq, IRQ_RISE, 1);
+ }
+
+ /** Attach a function to call when a falling edge occurs on the input
+ *
+ * @param fptr A pointer to a void function, or 0 to set as none
+ */
+ void fall(void (*fptr)(void));
+
+ /** Attach a member function to call when a falling edge occurs on the input
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ */
+ template<typename T>
+ void fall(T* tptr, void (T::*mptr)(void)) {
+ _fall.attach(tptr, mptr);
+ gpio_irq_set(&gpio_irq, IRQ_FALL, 1);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+ /** Enable IRQ. This method depends on hw implementation, might enable one
+ * port interrupts. For further information, check gpio_irq_enable().
+ */
+ void enable_irq();
+
+ /** Disable IRQ. This method depends on hw implementation, might disable one
+ * port interrupts. For further information, check gpio_irq_disable().
+ */
+ void disable_irq();
+
+ static void _irq_handler(uint32_t id, gpio_irq_event event);
+
+protected:
+ gpio_t gpio;
+ gpio_irq_t gpio_irq;
+
+ FunctionPointer _rise;
+ FunctionPointer _fall;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/InterruptManager.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,143 @@
+#ifndef MBED_INTERRUPTMANAGER_H
+#define MBED_INTERRUPTMANAGER_H
+
+#include "cmsis.h"
+#include "CallChain.h"
+#include <string.h>
+
+namespace mbed {
+
+/** Use this singleton if you need to chain interrupt handlers.
+ *
+ * Example (for LPC1768):
+ * @code
+ * #include "InterruptManager.h"
+ * #include "mbed.h"
+ *
+ * Ticker flipper;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ *
+ * void flip(void) {
+ * led1 = !led1;
+ * }
+ *
+ * void handler(void) {
+ * led2 = !led1;
+ * }
+ *
+ * int main() {
+ * led1 = led2 = 0;
+ * flipper.attach(&flip, 1.0);
+ * InterruptManager::get()->add_handler(handler, TIMER3_IRQn);
+ * }
+ * @endcode
+ */
+class InterruptManager {
+public:
+ /** Return the only instance of this class
+ */
+ static InterruptManager* get();
+
+ /** Destroy the current instance of the interrupt manager
+ */
+ static void destroy();
+
+ /** Add a handler for an interrupt at the end of the handler list
+ *
+ * @param function the handler to add
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add_handler(void (*function)(void), IRQn_Type irq) {
+ return add_common(function, irq);
+ }
+
+ /** Add a handler for an interrupt at the beginning of the handler list
+ *
+ * @param function the handler to add
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add_handler_front(void (*function)(void), IRQn_Type irq) {
+ return add_common(function, irq, true);
+ }
+
+ /** Add a handler for an interrupt at the end of the handler list
+ *
+ * @param tptr pointer to the object that has the handler function
+ * @param mptr pointer to the actual handler function
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add_handler(T* tptr, void (T::*mptr)(void), IRQn_Type irq) {
+ return add_common(tptr, mptr, irq);
+ }
+
+ /** Add a handler for an interrupt at the beginning of the handler list
+ *
+ * @param tptr pointer to the object that has the handler function
+ * @param mptr pointer to the actual handler function
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add_handler_front(T* tptr, void (T::*mptr)(void), IRQn_Type irq) {
+ return add_common(tptr, mptr, irq, true);
+ }
+
+ /** Remove a handler from an interrupt
+ *
+ * @param handler the function object for the handler to remove
+ * @param irq the interrupt number
+ *
+ * @returns
+ * true if the handler was found and removed, false otherwise
+ */
+ bool remove_handler(pFunctionPointer_t handler, IRQn_Type irq);
+
+private:
+ InterruptManager();
+ ~InterruptManager();
+
+ // We declare the copy contructor and the assignment operator, but we don't
+ // implement them. This way, if someone tries to copy/assign our instance,
+ // he will get an error at compile time.
+ InterruptManager(const InterruptManager&);
+ InterruptManager& operator =(const InterruptManager&);
+
+ template<typename T>
+ pFunctionPointer_t add_common(T *tptr, void (T::*mptr)(void), IRQn_Type irq, bool front=false) {
+ int irq_pos = get_irq_index(irq);
+ bool change = must_replace_vector(irq);
+
+ pFunctionPointer_t pf = front ? _chains[irq_pos]->add_front(tptr, mptr) : _chains[irq_pos]->add(tptr, mptr);
+ if (change)
+ NVIC_SetVector(irq, (uint32_t)&InterruptManager::static_irq_helper);
+ return pf;
+ }
+
+ pFunctionPointer_t add_common(void (*function)(void), IRQn_Type irq, bool front=false);
+ bool must_replace_vector(IRQn_Type irq);
+ int get_irq_index(IRQn_Type irq);
+ void irq_helper();
+ void add_helper(void (*function)(void), IRQn_Type irq, bool front=false);
+ static void static_irq_helper();
+
+ CallChain* _chains[NVIC_NUM_VECTORS];
+ static InterruptManager* _instance;
+};
+
+} // namespace mbed
+
+#endif
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/LocalFileSystem.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOCALFILESYSTEM_H
+#define MBED_LOCALFILESYSTEM_H
+
+#include "platform.h"
+
+#if DEVICE_LOCALFILESYSTEM
+
+#include "FileSystemLike.h"
+
+namespace mbed {
+
+FILEHANDLE local_file_open(const char* name, int flags);
+
+class LocalFileHandle : public FileHandle {
+
+public:
+ LocalFileHandle(FILEHANDLE fh);
+
+ virtual int close();
+
+ virtual ssize_t write(const void *buffer, size_t length);
+
+ virtual ssize_t read(void *buffer, size_t length);
+
+ virtual int isatty();
+
+ virtual off_t lseek(off_t position, int whence);
+
+ virtual int fsync();
+
+ virtual off_t flen();
+
+protected:
+ FILEHANDLE _fh;
+ int pos;
+};
+
+/** A filesystem for accessing the local mbed Microcontroller USB disk drive
+ *
+ * This allows programs to read and write files on the same disk drive that is used to program the
+ * mbed Microcontroller. Once created, the standard C file access functions are used to open,
+ * read and write files.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * LocalFileSystem local("local"); // Create the local filesystem under the name "local"
+ *
+ * int main() {
+ * FILE *fp = fopen("/local/out.txt", "w"); // Open "out.txt" on the local file system for writing
+ * fprintf(fp, "Hello World!");
+ * fclose(fp);
+ * remove("/local/out.txt"); // Removes the file "out.txt" from the local file system
+ *
+ * DIR *d = opendir("/local"); // Opens the root directory of the local file system
+ * struct dirent *p;
+ * while((p = readdir(d)) != NULL) { // Print the names of the files in the local file system
+ * printf("%s\n", p->d_name); // to stdout.
+ * }
+ * closedir(d);
+ * }
+ * @endcode
+ *
+ * @note
+ * If the microcontroller program makes an access to the local drive, it will be marked as "removed"
+ * on the Host computer. This means it is no longer accessible from the Host Computer.
+ *
+ * The drive will only re-appear when the microcontroller program exists. Note that if the program does
+ * not exit, you will need to hold down reset on the mbed Microcontroller to be able to see the drive again!
+ */
+class LocalFileSystem : public FileSystemLike {
+
+public:
+ LocalFileSystem(const char* n) : FileSystemLike(n) {
+
+ }
+
+ virtual FileHandle *open(const char* name, int flags);
+ virtual int remove(const char *filename);
+ virtual DirHandle *opendir(const char *name);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/LowPowerTicker.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,44 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOWPOWERTICKER_H
+#define MBED_LOWPOWERTICKER_H
+
+#include "platform.h"
+#include "Ticker.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "lp_ticker_api.h"
+
+namespace mbed {
+
+/** Low Power Ticker
+ */
+class LowPowerTicker : public Ticker {
+
+public:
+ LowPowerTicker() : Ticker(get_lp_ticker_data()) {
+ }
+
+ virtual ~LowPowerTicker() {
+ }
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/LowPowerTimeout.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOWPOWERTIMEOUT_H
+#define MBED_LOWPOWERTIMEOUT_H
+
+#include "platform.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "lp_ticker_api.h"
+#include "LowPowerTicker.h"
+
+namespace mbed {
+
+/** Low Power Timout
+ */
+class LowPowerTimeout : public LowPowerTicker {
+
+private:
+ virtual void handler(void) {
+ _function.call();
+ }
+};
+
+}
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/LowPowerTimer.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOWPOWERTIMER_H
+#define MBED_LOWPOWERTIMER_H
+
+#include "platform.h"
+#include "Timer.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "lp_ticker_api.h"
+
+namespace mbed {
+
+/** Low power timer
+ */
+class LowPowerTimer : public Timer {
+
+public:
+ LowPowerTimer() : Timer(get_lp_ticker_data()) {
+ }
+
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/PortIn.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTIN_H
+#define MBED_PORTIN_H
+
+#include "platform.h"
+
+#if DEVICE_PORTIN
+
+#include "port_api.h"
+
+namespace mbed {
+
+/** A multiple pin digital input
+ *
+ * Example:
+ * @code
+ * // Switch on an LED if any of mbed pins 21-26 is high
+ *
+ * #include "mbed.h"
+ *
+ * PortIn p(Port2, 0x0000003F); // p21-p26
+ * DigitalOut ind(LED4);
+ *
+ * int main() {
+ * while(1) {
+ * int pins = p.read();
+ * if(pins) {
+ * ind = 1;
+ * } else {
+ * ind = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class PortIn {
+public:
+
+ /** Create an PortIn, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortIn(PortName port, int mask = 0xFFFFFFFF) {
+ port_init(&_port, port, mask, PIN_INPUT);
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated port pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode mode) {
+ port_mode(&_port, mode);
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/PortInOut.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTINOUT_H
+#define MBED_PORTINOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PORTINOUT
+
+#include "port_api.h"
+
+namespace mbed {
+
+/** A multiple pin digital in/out used to set/read multiple bi-directional pins
+ */
+class PortInOut {
+public:
+
+ /** Create an PortInOut, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortInOut(PortName port, int mask = 0xFFFFFFFF) {
+ port_init(&_port, port, mask, PIN_INPUT);
+ }
+
+ /** Write the value to the output port
+ *
+ * @param value An integer specifying a bit to write for every corresponding port pin
+ */
+ void write(int value) {
+ port_write(&_port, value);
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated port pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** Set as an output
+ */
+ void output() {
+ port_dir(&_port, PIN_OUTPUT);
+ }
+
+ /** Set as an input
+ */
+ void input() {
+ port_dir(&_port, PIN_INPUT);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode mode) {
+ port_mode(&_port, mode);
+ }
+
+ /** A shorthand for write()
+ */
+ PortInOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ PortInOut& operator= (PortInOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/PortOut.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTOUT_H
+#define MBED_PORTOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PORTOUT
+
+#include "port_api.h"
+
+namespace mbed {
+/** A multiple pin digital out
+ *
+ * Example:
+ * @code
+ * // Toggle all four LEDs
+ *
+ * #include "mbed.h"
+ *
+ * // LED1 = P1.18 LED2 = P1.20 LED3 = P1.21 LED4 = P1.23
+ * #define LED_MASK 0x00B40000
+ *
+ * PortOut ledport(Port1, LED_MASK);
+ *
+ * int main() {
+ * while(1) {
+ * ledport = LED_MASK;
+ * wait(1);
+ * ledport = 0;
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+class PortOut {
+public:
+
+ /** Create an PortOut, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortOut(PortName port, int mask = 0xFFFFFFFF) {
+ port_init(&_port, port, mask, PIN_OUTPUT);
+ }
+
+ /** Write the value to the output port
+ *
+ * @param value An integer specifying a bit to write for every corresponding PortOut pin
+ */
+ void write(int value) {
+ port_write(&_port, value);
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated PortOut pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** A shorthand for write()
+ */
+ PortOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ PortOut& operator= (PortOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/PwmOut.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,158 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PWMOUT_H
+#define MBED_PWMOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PWMOUT
+#include "pwmout_api.h"
+
+namespace mbed {
+
+/** A pulse-width modulation digital output
+ *
+ * Example
+ * @code
+ * // Fade a led on.
+ * #include "mbed.h"
+ *
+ * PwmOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * led = led + 0.01;
+ * wait(0.2);
+ * if(led == 1.0) {
+ * led = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ *
+ * @note
+ * On the LPC1768 and LPC2368, the PWMs all share the same
+ * period - if you change the period for one, you change it for all.
+ * Although routines that change the period maintain the duty cycle
+ * for its PWM, all other PWMs will require their duty cycle to be
+ * refreshed.
+ */
+class PwmOut {
+
+public:
+
+ /** Create a PwmOut connected to the specified pin
+ *
+ * @param pin PwmOut pin to connect to
+ */
+ PwmOut(PinName pin) {
+ pwmout_init(&_pwm, pin);
+ }
+
+ /** Set the ouput duty-cycle, specified as a percentage (float)
+ *
+ * @param value A floating-point value representing the output duty-cycle,
+ * specified as a percentage. The value should lie between
+ * 0.0f (representing on 0%) and 1.0f (representing on 100%).
+ * Values outside this range will be saturated to 0.0f or 1.0f.
+ */
+ void write(float value) {
+ pwmout_write(&_pwm, value);
+ }
+
+ /** Return the current output duty-cycle setting, measured as a percentage (float)
+ *
+ * @returns
+ * A floating-point value representing the current duty-cycle being output on the pin,
+ * measured as a percentage. The returned value will lie between
+ * 0.0f (representing on 0%) and 1.0f (representing on 100%).
+ *
+ * @note
+ * This value may not match exactly the value set by a previous <write>.
+ */
+ float read() {
+ return pwmout_read(&_pwm);
+ }
+
+ /** Set the PWM period, specified in seconds (float), keeping the duty cycle the same.
+ *
+ * @note
+ * The resolution is currently in microseconds; periods smaller than this
+ * will be set to zero.
+ */
+ void period(float seconds) {
+ pwmout_period(&_pwm, seconds);
+ }
+
+ /** Set the PWM period, specified in milli-seconds (int), keeping the duty cycle the same.
+ */
+ void period_ms(int ms) {
+ pwmout_period_ms(&_pwm, ms);
+ }
+
+ /** Set the PWM period, specified in micro-seconds (int), keeping the duty cycle the same.
+ */
+ void period_us(int us) {
+ pwmout_period_us(&_pwm, us);
+ }
+
+ /** Set the PWM pulsewidth, specified in seconds (float), keeping the period the same.
+ */
+ void pulsewidth(float seconds) {
+ pwmout_pulsewidth(&_pwm, seconds);
+ }
+
+ /** Set the PWM pulsewidth, specified in milli-seconds (int), keeping the period the same.
+ */
+ void pulsewidth_ms(int ms) {
+ pwmout_pulsewidth_ms(&_pwm, ms);
+ }
+
+ /** Set the PWM pulsewidth, specified in micro-seconds (int), keeping the period the same.
+ */
+ void pulsewidth_us(int us) {
+ pwmout_pulsewidth_us(&_pwm, us);
+ }
+
+#ifdef MBED_OPERATORS
+ /** A operator shorthand for write()
+ */
+ PwmOut& operator= (float value) {
+ write(value);
+ return *this;
+ }
+
+ PwmOut& operator= (PwmOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** An operator shorthand for read()
+ */
+ operator float() {
+ return read();
+ }
+#endif
+
+protected:
+ pwmout_t _pwm;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/RawSerial.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,90 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_RAW_SERIAL_H
+#define MBED_RAW_SERIAL_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "SerialBase.h"
+#include "serial_api.h"
+
+namespace mbed {
+
+/** A serial port (UART) for communication with other serial devices
+ * This is a variation of the Serial class that doesn't use streams,
+ * thus making it safe to use in interrupt handlers with the RTOS.
+ *
+ * Can be used for Full Duplex communication, or Simplex by specifying
+ * one pin as NC (Not Connected)
+ *
+ * Example:
+ * @code
+ * // Send a char to the PC
+ *
+ * #include "mbed.h"
+ *
+ * RawSerial pc(USBTX, USBRX);
+ *
+ * int main() {
+ * pc.putc('A');
+ * }
+ * @endcode
+ */
+class RawSerial: public SerialBase {
+
+public:
+ /** Create a RawSerial port, connected to the specified transmit and receive pins
+ *
+ * @param tx Transmit pin
+ * @param rx Receive pin
+ *
+ * @note
+ * Either tx or rx may be specified as NC if unused
+ */
+ RawSerial(PinName tx, PinName rx);
+
+ /** Write a char to the serial port
+ *
+ * @param c The char to write
+ *
+ * @returns The written char or -1 if an error occured
+ */
+ int putc(int c);
+
+ /** Read a char from the serial port
+ *
+ * @returns The char read from the serial port
+ */
+ int getc();
+
+ /** Write a string to the serial port
+ *
+ * @param str The string to write
+ *
+ * @returns 0 if the write succeeds, EOF for error
+ */
+ int puts(const char *str);
+
+ int printf(const char *format, ...);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SPI.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,272 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPI_H
+#define MBED_SPI_H
+
+#include "platform.h"
+
+#if DEVICE_SPI
+
+#include "spi_api.h"
+
+#if DEVICE_SPI_ASYNCH
+#include "CThunk.h"
+#include "dma_api.h"
+#include "CircularBuffer.h"
+#include "FunctionPointer.h"
+#include "Transaction.h"
+#endif
+
+namespace mbed {
+
+/** A SPI Master, used for communicating with SPI slave devices
+ *
+ * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
+ *
+ * Most SPI devices will also require Chip Select and Reset signals. These
+ * can be controlled using <DigitalOut> pins
+ *
+ * Example:
+ * @code
+ * // Send a byte to a SPI slave, and record the response
+ *
+ * #include "mbed.h"
+ *
+ * // hardware ssel (where applicable)
+ * //SPI device(p5, p6, p7, p8); // mosi, miso, sclk, ssel
+ *
+ * // software ssel
+ * SPI device(p5, p6, p7); // mosi, miso, sclk
+ * DigitalOut cs(p8); // ssel
+ *
+ * int main() {
+ * // hardware ssel (where applicable)
+ * //int response = device.write(0xFF);
+ *
+ * // software ssel
+ * cs = 0;
+ * int response = device.write(0xFF);
+ * cs = 1;
+ * }
+ * @endcode
+ */
+class SPI {
+
+public:
+
+ /** Create a SPI master connected to the specified pins
+ *
+ * mosi or miso can be specfied as NC if not used
+ *
+ * @param mosi SPI Master Out, Slave In pin
+ * @param miso SPI Master In, Slave Out pin
+ * @param sclk SPI Clock pin
+ * @param ssel SPI chip select pin
+ */
+ SPI(PinName mosi, PinName miso, PinName sclk, PinName ssel=NC);
+
+ /** Configure the data transmission format
+ *
+ * @param bits Number of bits per SPI frame (4 - 16)
+ * @param mode Clock polarity and phase mode (0 - 3)
+ *
+ * @code
+ * mode | POL PHA
+ * -----+--------
+ * 0 | 0 0
+ * 1 | 0 1
+ * 2 | 1 0
+ * 3 | 1 1
+ * @endcode
+ */
+ void format(int bits, int mode = 0);
+
+ /** Set the spi bus clock frequency
+ *
+ * @param hz SCLK frequency in hz (default = 1MHz)
+ */
+ void frequency(int hz = 1000000);
+
+ /** Write to the SPI Slave and return the response
+ *
+ * @param value Data to be sent to the SPI slave
+ *
+ * @returns
+ * Response from the SPI slave
+ */
+ virtual int write(int value);
+
+#if DEVICE_SPI_ASYNCH
+
+ /** Start non-blocking SPI transfer using 8bit buffers.
+ *
+ * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+ * the default SPI value is sent
+ * @param tx_length The length of TX buffer
+ * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+ * received data are ignored
+ * @param rx_length The length of RX buffer
+ * @param callback The event callback function
+ * @param event The logical OR of events to modify
+ * @return Zero if the transfer has started, or -1 if SPI peripheral is busy
+ */
+ virtual int transfer(uint8_t *tx_buffer, int tx_length, uint8_t *rx_buffer, int rx_length, const event_callback_t& callback, int event = SPI_EVENT_COMPLETE) {
+ return transfer(tx_buffer, tx_length, rx_buffer, rx_length, 8, callback, event);
+ }
+
+ /** Start non-blocking SPI transfer using 16bit buffers.
+ *
+ * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+ * the default SPI value is sent
+ * @param tx_length The length of TX buffer
+ * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+ * received data are ignored
+ * @param rx_length The length of RX buffer
+ * @param callback The event callback function
+ * @param event The logical OR of events to modify
+ * @return Zero if the transfer has started, or -1 if SPI peripheral is busy
+ */
+ virtual int transfer(uint16_t *tx_buffer, int tx_length, uint16_t *rx_buffer, int rx_length, const event_callback_t& callback, int event = SPI_EVENT_COMPLETE) {
+ return transfer(tx_buffer, tx_length, rx_buffer, rx_length, 16, callback, event);
+ }
+
+ /** Start non-blocking SPI transfer using 32bit buffers.
+ *
+ * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+ * the default SPI value is sent
+ * @param tx_length The length of TX buffer
+ * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+ * received data are ignored
+ * @param rx_length The length of RX buffer
+ * @param callback The event callback function
+ * @param event The logical OR of events to modify
+ * @return Zero if the transfer has started, or -1 if SPI peripheral is busy
+ */
+ virtual int transfer(uint32_t *tx_buffer, int tx_length, uint32_t *rx_buffer, int rx_length, const event_callback_t& callback, int event = SPI_EVENT_COMPLETE) {
+ return transfer((void *)tx_buffer, tx_length, (void *)rx_buffer, rx_length, 32, callback, event);
+ }
+
+ /** Abort the on-going SPI transfer, and continue with transfer's in the queue if any.
+ */
+ void abort_transfer();
+
+ /** Clear the transaction buffer
+ */
+ void clear_transfer_buffer();
+
+ /** Clear the transaction buffer and abort on-going transfer.
+ */
+ void abort_all_transfers();
+
+ /** Configure DMA usage suggestion for non-blocking transfers
+ *
+ * @param usage The usage DMA hint for peripheral
+ * @return Zero if the usage was set, -1 if a transaction is on-going
+ */
+ int set_dma_usage(DMAUsage usage);
+
+protected:
+ /** SPI IRQ handler
+ *
+ */
+ void irq_handler_asynch(void);
+
+ /** Common transfer method
+ *
+ * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+ * the default SPI value is sent
+ * @param tx_length The length of TX buffer
+ * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+ * received data are ignored
+ * @param rx_length The length of RX buffer
+ * @param bit_width The buffers element width
+ * @param callback The event callback function
+ * @param event The logical OR of events to modify
+ * @return Zero if the transfer has started or was added to the queue, or -1 if SPI peripheral is busy/buffer is full
+ */
+ int transfer(void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event);
+
+ /**
+ *
+ * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+ * the default SPI value is sent
+ * @param tx_length The length of TX buffer
+ * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+ * received data are ignored
+ * @param rx_length The length of RX buffer
+ * @param bit_width The buffers element width
+ * @param callback The event callback function
+ * @param event The logical OR of events to modify
+ * @return Zero if a transfer was added to the queue, or -1 if the queue is full
+ */
+ int queue_transfer(void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event);
+
+ /** Configures a callback, spi peripheral and initiate a new transfer
+ *
+ * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+ * the default SPI value is sent
+ * @param tx_length The length of TX buffer
+ * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+ * received data are ignored
+ * @param rx_length The length of RX buffer
+ * @param bit_width The buffers element width
+ * @param callback The event callback function
+ * @param event The logical OR of events to modify
+ */
+ void start_transfer(void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event);
+
+#if TRANSACTION_QUEUE_SIZE_SPI
+
+ /** Start a new transaction
+ *
+ * @param data Transaction data
+ */
+ void start_transaction(transaction_t *data);
+
+ /** Dequeue a transaction
+ *
+ */
+ void dequeue_transaction();
+ static CircularBuffer<Transaction<SPI>, TRANSACTION_QUEUE_SIZE_SPI> _transaction_buffer;
+#endif
+
+#endif
+
+public:
+ virtual ~SPI() {
+ }
+
+protected:
+ spi_t _spi;
+
+#if DEVICE_SPI_ASYNCH
+ CThunk<SPI> _irq;
+ event_callback_t _callback;
+ DMAUsage _usage;
+#endif
+
+ void aquire(void);
+ static SPI *_owner;
+ int _bits;
+ int _mode;
+ int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SPISlave.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,122 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPISLAVE_H
+#define MBED_SPISLAVE_H
+
+#include "platform.h"
+
+#if DEVICE_SPISLAVE
+
+#include "spi_api.h"
+
+namespace mbed {
+
+/** A SPI slave, used for communicating with a SPI Master device
+ *
+ * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
+ *
+ * Example:
+ * @code
+ * // Reply to a SPI master as slave
+ *
+ * #include "mbed.h"
+ *
+ * SPISlave device(p5, p6, p7, p8); // mosi, miso, sclk, ssel
+ *
+ * int main() {
+ * device.reply(0x00); // Prime SPI with first reply
+ * while(1) {
+ * if(device.receive()) {
+ * int v = device.read(); // Read byte from master
+ * v = (v + 1) % 0x100; // Add one to it, modulo 256
+ * device.reply(v); // Make this the next reply
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class SPISlave {
+
+public:
+
+ /** Create a SPI slave connected to the specified pins
+ *
+ * mosi or miso can be specfied as NC if not used
+ *
+ * @param mosi SPI Master Out, Slave In pin
+ * @param miso SPI Master In, Slave Out pin
+ * @param sclk SPI Clock pin
+ * @param ssel SPI chip select pin
+ */
+ SPISlave(PinName mosi, PinName miso, PinName sclk, PinName ssel);
+
+ /** Configure the data transmission format
+ *
+ * @param bits Number of bits per SPI frame (4 - 16)
+ * @param mode Clock polarity and phase mode (0 - 3)
+ *
+ * @code
+ * mode | POL PHA
+ * -----+--------
+ * 0 | 0 0
+ * 1 | 0 1
+ * 2 | 1 0
+ * 3 | 1 1
+ * @endcode
+ */
+ void format(int bits, int mode = 0);
+
+ /** Set the spi bus clock frequency
+ *
+ * @param hz SCLK frequency in hz (default = 1MHz)
+ */
+ void frequency(int hz = 1000000);
+
+ /** Polls the SPI to see if data has been received
+ *
+ * @returns
+ * 0 if no data,
+ * 1 otherwise
+ */
+ int receive(void);
+
+ /** Retrieve data from receive buffer as slave
+ *
+ * @returns
+ * the data in the receive buffer
+ */
+ int read(void);
+
+ /** Fill the transmission buffer with the value to be written out
+ * as slave on the next received message from the master.
+ *
+ * @param value the data to be transmitted next
+ */
+ void reply(int value);
+
+protected:
+ spi_t _spi;
+
+ int _bits;
+ int _mode;
+ int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Serial.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,74 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIAL_H
+#define MBED_SERIAL_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "Stream.h"
+#include "SerialBase.h"
+#include "serial_api.h"
+
+namespace mbed {
+
+/** A serial port (UART) for communication with other serial devices
+ *
+ * Can be used for Full Duplex communication, or Simplex by specifying
+ * one pin as NC (Not Connected)
+ *
+ * Example:
+ * @code
+ * // Print "Hello World" to the PC
+ *
+ * #include "mbed.h"
+ *
+ * Serial pc(USBTX, USBRX);
+ *
+ * int main() {
+ * pc.printf("Hello World\n");
+ * }
+ * @endcode
+ */
+class Serial : public SerialBase, public Stream {
+
+public:
+#if DEVICE_SERIAL_ASYNCH
+ using SerialBase::read;
+ using SerialBase::write;
+#endif
+
+ /** Create a Serial port, connected to the specified transmit and receive pins
+ *
+ * @param tx Transmit pin
+ * @param rx Receive pin
+ *
+ * @note
+ * Either tx or rx may be specified as NC if unused
+ */
+ Serial(PinName tx, PinName rx, const char *name=NULL);
+
+protected:
+ virtual int _getc();
+ virtual int _putc(int c);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SerialBase.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,223 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIALBASE_H
+#define MBED_SERIALBASE_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "Stream.h"
+#include "FunctionPointer.h"
+#include "serial_api.h"
+
+#if DEVICE_SERIAL_ASYNCH
+#include "CThunk.h"
+#include "dma_api.h"
+#endif
+
+namespace mbed {
+
+/** A base class for serial port implementations
+ * Can't be instantiated directly (use Serial or RawSerial)
+ */
+class SerialBase {
+
+public:
+ /** Set the baud rate of the serial port
+ *
+ * @param baudrate The baudrate of the serial port (default = 9600).
+ */
+ void baud(int baudrate);
+
+ enum Parity {
+ None = 0,
+ Odd,
+ Even,
+ Forced1,
+ Forced0
+ };
+
+ enum IrqType {
+ RxIrq = 0,
+ TxIrq
+ };
+
+ enum Flow {
+ Disabled = 0,
+ RTS,
+ CTS,
+ RTSCTS
+ };
+
+ /** Set the transmission format used by the serial port
+ *
+ * @param bits The number of bits in a word (5-8; default = 8)
+ * @param parity The parity used (SerialBase::None, SerialBase::Odd, SerialBase::Even, SerialBase::Forced1, SerialBase::Forced0; default = SerialBase::None)
+ * @param stop The number of stop bits (1 or 2; default = 1)
+ */
+ void format(int bits=8, Parity parity=SerialBase::None, int stop_bits=1);
+
+ /** Determine if there is a character available to read
+ *
+ * @returns
+ * 1 if there is a character available to read,
+ * 0 otherwise
+ */
+ int readable();
+
+ /** Determine if there is space available to write a character
+ *
+ * @returns
+ * 1 if there is space to write a character,
+ * 0 otherwise
+ */
+ int writeable();
+
+ /** Attach a function to call whenever a serial interrupt is generated
+ *
+ * @param fptr A pointer to a void function, or 0 to set as none
+ * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+ */
+ void attach(void (*fptr)(void), IrqType type=RxIrq);
+
+ /** Attach a member function to call whenever a serial interrupt is generated
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+ */
+ template<typename T>
+ void attach(T* tptr, void (T::*mptr)(void), IrqType type=RxIrq) {
+ if((mptr != NULL) && (tptr != NULL)) {
+ _irq[type].attach(tptr, mptr);
+ serial_irq_set(&_serial, (SerialIrq)type, 1);
+ } else {
+ serial_irq_set(&_serial, (SerialIrq)type, 0);
+ }
+ }
+
+ /** Generate a break condition on the serial line
+ */
+ void send_break();
+
+#if DEVICE_SERIAL_FC
+ /** Set the flow control type on the serial port
+ *
+ * @param type the flow control type (Disabled, RTS, CTS, RTSCTS)
+ * @param flow1 the first flow control pin (RTS for RTS or RTSCTS, CTS for CTS)
+ * @param flow2 the second flow control pin (CTS for RTSCTS)
+ */
+ void set_flow_control(Flow type, PinName flow1=NC, PinName flow2=NC);
+#endif
+
+ static void _irq_handler(uint32_t id, SerialIrq irq_type);
+
+#if DEVICE_SERIAL_ASYNCH
+
+ /** Begin asynchronous write using 8bit buffer. The completition invokes registered TX event callback
+ *
+ * @param buffer The buffer where received data will be stored
+ * @param length The buffer length
+ * @param callback The event callback function
+ * @param event The logical OR of TX events
+ */
+ int write(uint8_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_TX_COMPLETE);
+
+ /** Begin asynchronous write using 16bit buffer. The completition invokes registered TX event callback
+ *
+ * @param buffer The buffer where received data will be stored
+ * @param length The buffer length
+ * @param callback The event callback function
+ * @param event The logical OR of TX events
+ */
+ int write(uint16_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_TX_COMPLETE);
+
+ /** Abort the on-going write transfer
+ */
+ void abort_write();
+
+ /** Begin asynchronous reading using 8bit buffer. The completition invokes registred RX event callback.
+ *
+ * @param buffer The buffer where received data will be stored
+ * @param length The buffer length
+ * @param callback The event callback function
+ * @param event The logical OR of RX events
+ * @param char_match The matching character
+ */
+ int read(uint8_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_RX_COMPLETE, unsigned char char_match = SERIAL_RESERVED_CHAR_MATCH);
+
+ /** Begin asynchronous reading using 16bit buffer. The completition invokes registred RX event callback.
+ *
+ * @param buffer The buffer where received data will be stored
+ * @param length The buffer length
+ * @param callback The event callback function
+ * @param event The logical OR of RX events
+ * @param char_match The matching character
+ */
+ int read(uint16_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_RX_COMPLETE, unsigned char char_match = SERIAL_RESERVED_CHAR_MATCH);
+
+ /** Abort the on-going read transfer
+ */
+ void abort_read();
+
+ /** Configure DMA usage suggestion for non-blocking TX transfers
+ *
+ * @param usage The usage DMA hint for peripheral
+ * @return Zero if the usage was set, -1 if a transaction is on-going
+ */
+ int set_dma_usage_tx(DMAUsage usage);
+
+ /** Configure DMA usage suggestion for non-blocking RX transfers
+ *
+ * @param usage The usage DMA hint for peripheral
+ * @return Zero if the usage was set, -1 if a transaction is on-going
+ */
+ int set_dma_usage_rx(DMAUsage usage);
+
+protected:
+ void start_read(void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event, unsigned char char_match);
+ void start_write(void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event);
+ void interrupt_handler_asynch(void);
+#endif
+
+protected:
+ SerialBase(PinName tx, PinName rx);
+ virtual ~SerialBase() {
+ }
+
+ int _base_getc();
+ int _base_putc(int c);
+
+#if DEVICE_SERIAL_ASYNCH
+ CThunk<SerialBase> _thunk_irq;
+ event_callback_t _tx_callback;
+ event_callback_t _rx_callback;
+ DMAUsage _tx_usage;
+ DMAUsage _rx_usage;
+#endif
+
+ serial_t _serial;
+ FunctionPointer _irq[2];
+ int _baud;
+
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Stream.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,65 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_STREAM_H
+#define MBED_STREAM_H
+
+#include "platform.h"
+#include "FileLike.h"
+
+namespace mbed {
+
+extern void mbed_set_unbuffered_stream(FILE *_file);
+extern int mbed_getc(FILE *_file);
+extern char* mbed_gets(char *s, int size, FILE *_file);
+
+class Stream : public FileLike {
+
+public:
+ Stream(const char *name=NULL);
+ virtual ~Stream();
+
+ int putc(int c);
+ int puts(const char *s);
+ int getc();
+ char *gets(char *s, int size);
+ int printf(const char* format, ...);
+ int scanf(const char* format, ...);
+
+ operator std::FILE*() {return _file;}
+
+protected:
+ virtual int close();
+ virtual ssize_t write(const void* buffer, size_t length);
+ virtual ssize_t read(void* buffer, size_t length);
+ virtual off_t lseek(off_t offset, int whence);
+ virtual int isatty();
+ virtual int fsync();
+ virtual off_t flen();
+
+ virtual int _putc(int c) = 0;
+ virtual int _getc() = 0;
+
+ std::FILE *_file;
+
+ /* disallow copy constructor and assignment operators */
+private:
+ Stream(const Stream&);
+ Stream & operator = (const Stream&);
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/LPC17xx.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,1035 @@
+/**************************************************************************//**
+ * @file LPC17xx.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File for
+ * NXP LPC17xx Device Series
+ * @version: V1.09
+ * @date: 17. March 2010
+
+ *
+ * @note
+ * Copyright (C) 2009 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+
+#ifndef __LPC17xx_H__
+#define __LPC17xx_H__
+
+/*
+ * ==========================================================================
+ * ---------- Interrupt Number Definition -----------------------------------
+ * ==========================================================================
+ */
+
+typedef enum IRQn
+{
+/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+
+/****** LPC17xx Specific Interrupt Numbers *******************************************************/
+ WDT_IRQn = 0, /*!< Watchdog Timer Interrupt */
+ TIMER0_IRQn = 1, /*!< Timer0 Interrupt */
+ TIMER1_IRQn = 2, /*!< Timer1 Interrupt */
+ TIMER2_IRQn = 3, /*!< Timer2 Interrupt */
+ TIMER3_IRQn = 4, /*!< Timer3 Interrupt */
+ UART0_IRQn = 5, /*!< UART0 Interrupt */
+ UART1_IRQn = 6, /*!< UART1 Interrupt */
+ UART2_IRQn = 7, /*!< UART2 Interrupt */
+ UART3_IRQn = 8, /*!< UART3 Interrupt */
+ PWM1_IRQn = 9, /*!< PWM1 Interrupt */
+ I2C0_IRQn = 10, /*!< I2C0 Interrupt */
+ I2C1_IRQn = 11, /*!< I2C1 Interrupt */
+ I2C2_IRQn = 12, /*!< I2C2 Interrupt */
+ SPI_IRQn = 13, /*!< SPI Interrupt */
+ SSP0_IRQn = 14, /*!< SSP0 Interrupt */
+ SSP1_IRQn = 15, /*!< SSP1 Interrupt */
+ PLL0_IRQn = 16, /*!< PLL0 Lock (Main PLL) Interrupt */
+ RTC_IRQn = 17, /*!< Real Time Clock Interrupt */
+ EINT0_IRQn = 18, /*!< External Interrupt 0 Interrupt */
+ EINT1_IRQn = 19, /*!< External Interrupt 1 Interrupt */
+ EINT2_IRQn = 20, /*!< External Interrupt 2 Interrupt */
+ EINT3_IRQn = 21, /*!< External Interrupt 3 Interrupt */
+ ADC_IRQn = 22, /*!< A/D Converter Interrupt */
+ BOD_IRQn = 23, /*!< Brown-Out Detect Interrupt */
+ USB_IRQn = 24, /*!< USB Interrupt */
+ CAN_IRQn = 25, /*!< CAN Interrupt */
+ DMA_IRQn = 26, /*!< General Purpose DMA Interrupt */
+ I2S_IRQn = 27, /*!< I2S Interrupt */
+ ENET_IRQn = 28, /*!< Ethernet Interrupt */
+ RIT_IRQn = 29, /*!< Repetitive Interrupt Timer Interrupt */
+ MCPWM_IRQn = 30, /*!< Motor Control PWM Interrupt */
+ QEI_IRQn = 31, /*!< Quadrature Encoder Interface Interrupt */
+ PLL1_IRQn = 32, /*!< PLL1 Lock (USB PLL) Interrupt */
+ USBActivity_IRQn = 33, /* USB Activity interrupt */
+ CANActivity_IRQn = 34, /* CAN Activity interrupt */
+} IRQn_Type;
+
+
+/*
+ * ==========================================================================
+ * ----------- Processor and Core Peripheral Section ------------------------
+ * ==========================================================================
+ */
+
+/* Configuration of the Cortex-M3 Processor and Core Peripherals */
+#define __MPU_PRESENT 1 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 5 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+
+#include "core_cm3.h" /* Cortex-M3 processor and core peripherals */
+#include "system_LPC17xx.h" /* System Header */
+
+
+/******************************************************************************/
+/* Device Specific Peripheral registers structures */
+/******************************************************************************/
+
+#if defined ( __CC_ARM )
+#pragma anon_unions
+#endif
+
+/*------------- System Control (SC) ------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t FLASHCFG; /* Flash Accelerator Module */
+ uint32_t RESERVED0[31];
+ __IO uint32_t PLL0CON; /* Clocking and Power Control */
+ __IO uint32_t PLL0CFG;
+ __I uint32_t PLL0STAT;
+ __O uint32_t PLL0FEED;
+ uint32_t RESERVED1[4];
+ __IO uint32_t PLL1CON;
+ __IO uint32_t PLL1CFG;
+ __I uint32_t PLL1STAT;
+ __O uint32_t PLL1FEED;
+ uint32_t RESERVED2[4];
+ __IO uint32_t PCON;
+ __IO uint32_t PCONP;
+ uint32_t RESERVED3[15];
+ __IO uint32_t CCLKCFG;
+ __IO uint32_t USBCLKCFG;
+ __IO uint32_t CLKSRCSEL;
+ __IO uint32_t CANSLEEPCLR;
+ __IO uint32_t CANWAKEFLAGS;
+ uint32_t RESERVED4[10];
+ __IO uint32_t EXTINT; /* External Interrupts */
+ uint32_t RESERVED5;
+ __IO uint32_t EXTMODE;
+ __IO uint32_t EXTPOLAR;
+ uint32_t RESERVED6[12];
+ __IO uint32_t RSID; /* Reset */
+ uint32_t RESERVED7[7];
+ __IO uint32_t SCS; /* Syscon Miscellaneous Registers */
+ __IO uint32_t IRCTRIM; /* Clock Dividers */
+ __IO uint32_t PCLKSEL0;
+ __IO uint32_t PCLKSEL1;
+ uint32_t RESERVED8[4];
+ __IO uint32_t USBIntSt; /* USB Device/OTG Interrupt Register */
+ __IO uint32_t DMAREQSEL;
+ __IO uint32_t CLKOUTCFG; /* Clock Output Configuration */
+ } LPC_SC_TypeDef;
+
+/*------------- Pin Connect Block (PINCON) -----------------------------------*/
+typedef struct
+{
+ __IO uint32_t PINSEL0;
+ __IO uint32_t PINSEL1;
+ __IO uint32_t PINSEL2;
+ __IO uint32_t PINSEL3;
+ __IO uint32_t PINSEL4;
+ __IO uint32_t PINSEL5;
+ __IO uint32_t PINSEL6;
+ __IO uint32_t PINSEL7;
+ __IO uint32_t PINSEL8;
+ __IO uint32_t PINSEL9;
+ __IO uint32_t PINSEL10;
+ uint32_t RESERVED0[5];
+ __IO uint32_t PINMODE0;
+ __IO uint32_t PINMODE1;
+ __IO uint32_t PINMODE2;
+ __IO uint32_t PINMODE3;
+ __IO uint32_t PINMODE4;
+ __IO uint32_t PINMODE5;
+ __IO uint32_t PINMODE6;
+ __IO uint32_t PINMODE7;
+ __IO uint32_t PINMODE8;
+ __IO uint32_t PINMODE9;
+ __IO uint32_t PINMODE_OD0;
+ __IO uint32_t PINMODE_OD1;
+ __IO uint32_t PINMODE_OD2;
+ __IO uint32_t PINMODE_OD3;
+ __IO uint32_t PINMODE_OD4;
+ __IO uint32_t I2CPADCFG;
+} LPC_PINCON_TypeDef;
+
+/*------------- General Purpose Input/Output (GPIO) --------------------------*/
+typedef struct
+{
+ union {
+ __IO uint32_t FIODIR;
+ struct {
+ __IO uint16_t FIODIRL;
+ __IO uint16_t FIODIRH;
+ };
+ struct {
+ __IO uint8_t FIODIR0;
+ __IO uint8_t FIODIR1;
+ __IO uint8_t FIODIR2;
+ __IO uint8_t FIODIR3;
+ };
+ };
+ uint32_t RESERVED0[3];
+ union {
+ __IO uint32_t FIOMASK;
+ struct {
+ __IO uint16_t FIOMASKL;
+ __IO uint16_t FIOMASKH;
+ };
+ struct {
+ __IO uint8_t FIOMASK0;
+ __IO uint8_t FIOMASK1;
+ __IO uint8_t FIOMASK2;
+ __IO uint8_t FIOMASK3;
+ };
+ };
+ union {
+ __IO uint32_t FIOPIN;
+ struct {
+ __IO uint16_t FIOPINL;
+ __IO uint16_t FIOPINH;
+ };
+ struct {
+ __IO uint8_t FIOPIN0;
+ __IO uint8_t FIOPIN1;
+ __IO uint8_t FIOPIN2;
+ __IO uint8_t FIOPIN3;
+ };
+ };
+ union {
+ __IO uint32_t FIOSET;
+ struct {
+ __IO uint16_t FIOSETL;
+ __IO uint16_t FIOSETH;
+ };
+ struct {
+ __IO uint8_t FIOSET0;
+ __IO uint8_t FIOSET1;
+ __IO uint8_t FIOSET2;
+ __IO uint8_t FIOSET3;
+ };
+ };
+ union {
+ __O uint32_t FIOCLR;
+ struct {
+ __O uint16_t FIOCLRL;
+ __O uint16_t FIOCLRH;
+ };
+ struct {
+ __O uint8_t FIOCLR0;
+ __O uint8_t FIOCLR1;
+ __O uint8_t FIOCLR2;
+ __O uint8_t FIOCLR3;
+ };
+ };
+} LPC_GPIO_TypeDef;
+
+typedef struct
+{
+ __I uint32_t IntStatus;
+ __I uint32_t IO0IntStatR;
+ __I uint32_t IO0IntStatF;
+ __O uint32_t IO0IntClr;
+ __IO uint32_t IO0IntEnR;
+ __IO uint32_t IO0IntEnF;
+ uint32_t RESERVED0[3];
+ __I uint32_t IO2IntStatR;
+ __I uint32_t IO2IntStatF;
+ __O uint32_t IO2IntClr;
+ __IO uint32_t IO2IntEnR;
+ __IO uint32_t IO2IntEnF;
+} LPC_GPIOINT_TypeDef;
+
+/*------------- Timer (TIM) --------------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t IR;
+ __IO uint32_t TCR;
+ __IO uint32_t TC;
+ __IO uint32_t PR;
+ __IO uint32_t PC;
+ __IO uint32_t MCR;
+ __IO uint32_t MR0;
+ __IO uint32_t MR1;
+ __IO uint32_t MR2;
+ __IO uint32_t MR3;
+ __IO uint32_t CCR;
+ __I uint32_t CR0;
+ __I uint32_t CR1;
+ uint32_t RESERVED0[2];
+ __IO uint32_t EMR;
+ uint32_t RESERVED1[12];
+ __IO uint32_t CTCR;
+} LPC_TIM_TypeDef;
+
+/*------------- Pulse-Width Modulation (PWM) ---------------------------------*/
+typedef struct
+{
+ __IO uint32_t IR;
+ __IO uint32_t TCR;
+ __IO uint32_t TC;
+ __IO uint32_t PR;
+ __IO uint32_t PC;
+ __IO uint32_t MCR;
+ __IO uint32_t MR0;
+ __IO uint32_t MR1;
+ __IO uint32_t MR2;
+ __IO uint32_t MR3;
+ __IO uint32_t CCR;
+ __I uint32_t CR0;
+ __I uint32_t CR1;
+ __I uint32_t CR2;
+ __I uint32_t CR3;
+ uint32_t RESERVED0;
+ __IO uint32_t MR4;
+ __IO uint32_t MR5;
+ __IO uint32_t MR6;
+ __IO uint32_t PCR;
+ __IO uint32_t LER;
+ uint32_t RESERVED1[7];
+ __IO uint32_t CTCR;
+} LPC_PWM_TypeDef;
+
+/*------------- Universal Asynchronous Receiver Transmitter (UART) -----------*/
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[7];
+ __I uint8_t LSR;
+ uint8_t RESERVED2[7];
+ __IO uint8_t SCR;
+ uint8_t RESERVED3[3];
+ __IO uint32_t ACR;
+ __IO uint8_t ICR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t FDR;
+ uint8_t RESERVED5[7];
+ __IO uint8_t TER;
+ uint8_t RESERVED6[39];
+ __IO uint32_t FIFOLVL;
+} LPC_UART_TypeDef;
+
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[7];
+ __I uint8_t LSR;
+ uint8_t RESERVED2[7];
+ __IO uint8_t SCR;
+ uint8_t RESERVED3[3];
+ __IO uint32_t ACR;
+ __IO uint8_t ICR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t FDR;
+ uint8_t RESERVED5[7];
+ __IO uint8_t TER;
+ uint8_t RESERVED6[39];
+ __IO uint32_t FIFOLVL;
+} LPC_UART0_TypeDef;
+
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[3];
+ __IO uint8_t MCR;
+ uint8_t RESERVED2[3];
+ __I uint8_t LSR;
+ uint8_t RESERVED3[3];
+ __I uint8_t MSR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t SCR;
+ uint8_t RESERVED5[3];
+ __IO uint32_t ACR;
+ uint32_t RESERVED6;
+ __IO uint32_t FDR;
+ uint32_t RESERVED7;
+ __IO uint8_t TER;
+ uint8_t RESERVED8[27];
+ __IO uint8_t RS485CTRL;
+ uint8_t RESERVED9[3];
+ __IO uint8_t ADRMATCH;
+ uint8_t RESERVED10[3];
+ __IO uint8_t RS485DLY;
+ uint8_t RESERVED11[3];
+ __IO uint32_t FIFOLVL;
+} LPC_UART1_TypeDef;
+
+/*------------- Serial Peripheral Interface (SPI) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t SPCR;
+ __I uint32_t SPSR;
+ __IO uint32_t SPDR;
+ __IO uint32_t SPCCR;
+ uint32_t RESERVED0[3];
+ __IO uint32_t SPINT;
+} LPC_SPI_TypeDef;
+
+/*------------- Synchronous Serial Communication (SSP) -----------------------*/
+typedef struct
+{
+ __IO uint32_t CR0;
+ __IO uint32_t CR1;
+ __IO uint32_t DR;
+ __I uint32_t SR;
+ __IO uint32_t CPSR;
+ __IO uint32_t IMSC;
+ __IO uint32_t RIS;
+ __IO uint32_t MIS;
+ __IO uint32_t ICR;
+ __IO uint32_t DMACR;
+} LPC_SSP_TypeDef;
+
+/*------------- Inter-Integrated Circuit (I2C) -------------------------------*/
+typedef struct
+{
+ __IO uint32_t I2CONSET;
+ __I uint32_t I2STAT;
+ __IO uint32_t I2DAT;
+ __IO uint32_t I2ADR0;
+ __IO uint32_t I2SCLH;
+ __IO uint32_t I2SCLL;
+ __O uint32_t I2CONCLR;
+ __IO uint32_t MMCTRL;
+ __IO uint32_t I2ADR1;
+ __IO uint32_t I2ADR2;
+ __IO uint32_t I2ADR3;
+ __I uint32_t I2DATA_BUFFER;
+ __IO uint32_t I2MASK0;
+ __IO uint32_t I2MASK1;
+ __IO uint32_t I2MASK2;
+ __IO uint32_t I2MASK3;
+} LPC_I2C_TypeDef;
+
+/*------------- Inter IC Sound (I2S) -----------------------------------------*/
+typedef struct
+{
+ __IO uint32_t I2SDAO;
+ __IO uint32_t I2SDAI;
+ __O uint32_t I2STXFIFO;
+ __I uint32_t I2SRXFIFO;
+ __I uint32_t I2SSTATE;
+ __IO uint32_t I2SDMA1;
+ __IO uint32_t I2SDMA2;
+ __IO uint32_t I2SIRQ;
+ __IO uint32_t I2STXRATE;
+ __IO uint32_t I2SRXRATE;
+ __IO uint32_t I2STXBITRATE;
+ __IO uint32_t I2SRXBITRATE;
+ __IO uint32_t I2STXMODE;
+ __IO uint32_t I2SRXMODE;
+} LPC_I2S_TypeDef;
+
+/*------------- Repetitive Interrupt Timer (RIT) -----------------------------*/
+typedef struct
+{
+ __IO uint32_t RICOMPVAL;
+ __IO uint32_t RIMASK;
+ __IO uint8_t RICTRL;
+ uint8_t RESERVED0[3];
+ __IO uint32_t RICOUNTER;
+} LPC_RIT_TypeDef;
+
+/*------------- Real-Time Clock (RTC) ----------------------------------------*/
+typedef struct
+{
+ __IO uint8_t ILR;
+ uint8_t RESERVED0[7];
+ __IO uint8_t CCR;
+ uint8_t RESERVED1[3];
+ __IO uint8_t CIIR;
+ uint8_t RESERVED2[3];
+ __IO uint8_t AMR;
+ uint8_t RESERVED3[3];
+ __I uint32_t CTIME0;
+ __I uint32_t CTIME1;
+ __I uint32_t CTIME2;
+ __IO uint8_t SEC;
+ uint8_t RESERVED4[3];
+ __IO uint8_t MIN;
+ uint8_t RESERVED5[3];
+ __IO uint8_t HOUR;
+ uint8_t RESERVED6[3];
+ __IO uint8_t DOM;
+ uint8_t RESERVED7[3];
+ __IO uint8_t DOW;
+ uint8_t RESERVED8[3];
+ __IO uint16_t DOY;
+ uint16_t RESERVED9;
+ __IO uint8_t MONTH;
+ uint8_t RESERVED10[3];
+ __IO uint16_t YEAR;
+ uint16_t RESERVED11;
+ __IO uint32_t CALIBRATION;
+ __IO uint32_t GPREG0;
+ __IO uint32_t GPREG1;
+ __IO uint32_t GPREG2;
+ __IO uint32_t GPREG3;
+ __IO uint32_t GPREG4;
+ __IO uint8_t RTC_AUXEN;
+ uint8_t RESERVED12[3];
+ __IO uint8_t RTC_AUX;
+ uint8_t RESERVED13[3];
+ __IO uint8_t ALSEC;
+ uint8_t RESERVED14[3];
+ __IO uint8_t ALMIN;
+ uint8_t RESERVED15[3];
+ __IO uint8_t ALHOUR;
+ uint8_t RESERVED16[3];
+ __IO uint8_t ALDOM;
+ uint8_t RESERVED17[3];
+ __IO uint8_t ALDOW;
+ uint8_t RESERVED18[3];
+ __IO uint16_t ALDOY;
+ uint16_t RESERVED19;
+ __IO uint8_t ALMON;
+ uint8_t RESERVED20[3];
+ __IO uint16_t ALYEAR;
+ uint16_t RESERVED21;
+} LPC_RTC_TypeDef;
+
+/*------------- Watchdog Timer (WDT) -----------------------------------------*/
+typedef struct
+{
+ __IO uint8_t WDMOD;
+ uint8_t RESERVED0[3];
+ __IO uint32_t WDTC;
+ __O uint8_t WDFEED;
+ uint8_t RESERVED1[3];
+ __I uint32_t WDTV;
+ __IO uint32_t WDCLKSEL;
+} LPC_WDT_TypeDef;
+
+/*------------- Analog-to-Digital Converter (ADC) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t ADCR;
+ __IO uint32_t ADGDR;
+ uint32_t RESERVED0;
+ __IO uint32_t ADINTEN;
+ __I uint32_t ADDR0;
+ __I uint32_t ADDR1;
+ __I uint32_t ADDR2;
+ __I uint32_t ADDR3;
+ __I uint32_t ADDR4;
+ __I uint32_t ADDR5;
+ __I uint32_t ADDR6;
+ __I uint32_t ADDR7;
+ __I uint32_t ADSTAT;
+ __IO uint32_t ADTRM;
+} LPC_ADC_TypeDef;
+
+/*------------- Digital-to-Analog Converter (DAC) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t DACR;
+ __IO uint32_t DACCTRL;
+ __IO uint16_t DACCNTVAL;
+} LPC_DAC_TypeDef;
+
+/*------------- Motor Control Pulse-Width Modulation (MCPWM) -----------------*/
+typedef struct
+{
+ __I uint32_t MCCON;
+ __O uint32_t MCCON_SET;
+ __O uint32_t MCCON_CLR;
+ __I uint32_t MCCAPCON;
+ __O uint32_t MCCAPCON_SET;
+ __O uint32_t MCCAPCON_CLR;
+ __IO uint32_t MCTIM0;
+ __IO uint32_t MCTIM1;
+ __IO uint32_t MCTIM2;
+ __IO uint32_t MCPER0;
+ __IO uint32_t MCPER1;
+ __IO uint32_t MCPER2;
+ __IO uint32_t MCPW0;
+ __IO uint32_t MCPW1;
+ __IO uint32_t MCPW2;
+ __IO uint32_t MCDEADTIME;
+ __IO uint32_t MCCCP;
+ __IO uint32_t MCCR0;
+ __IO uint32_t MCCR1;
+ __IO uint32_t MCCR2;
+ __I uint32_t MCINTEN;
+ __O uint32_t MCINTEN_SET;
+ __O uint32_t MCINTEN_CLR;
+ __I uint32_t MCCNTCON;
+ __O uint32_t MCCNTCON_SET;
+ __O uint32_t MCCNTCON_CLR;
+ __I uint32_t MCINTFLAG;
+ __O uint32_t MCINTFLAG_SET;
+ __O uint32_t MCINTFLAG_CLR;
+ __O uint32_t MCCAP_CLR;
+} LPC_MCPWM_TypeDef;
+
+/*------------- Quadrature Encoder Interface (QEI) ---------------------------*/
+typedef struct
+{
+ __O uint32_t QEICON;
+ __I uint32_t QEISTAT;
+ __IO uint32_t QEICONF;
+ __I uint32_t QEIPOS;
+ __IO uint32_t QEIMAXPOS;
+ __IO uint32_t CMPOS0;
+ __IO uint32_t CMPOS1;
+ __IO uint32_t CMPOS2;
+ __I uint32_t INXCNT;
+ __IO uint32_t INXCMP;
+ __IO uint32_t QEILOAD;
+ __I uint32_t QEITIME;
+ __I uint32_t QEIVEL;
+ __I uint32_t QEICAP;
+ __IO uint32_t VELCOMP;
+ __IO uint32_t FILTER;
+ uint32_t RESERVED0[998];
+ __O uint32_t QEIIEC;
+ __O uint32_t QEIIES;
+ __I uint32_t QEIINTSTAT;
+ __I uint32_t QEIIE;
+ __O uint32_t QEICLR;
+ __O uint32_t QEISET;
+} LPC_QEI_TypeDef;
+
+/*------------- Controller Area Network (CAN) --------------------------------*/
+typedef struct
+{
+ __IO uint32_t mask[512]; /* ID Masks */
+} LPC_CANAF_RAM_TypeDef;
+
+typedef struct /* Acceptance Filter Registers */
+{
+ __IO uint32_t AFMR;
+ __IO uint32_t SFF_sa;
+ __IO uint32_t SFF_GRP_sa;
+ __IO uint32_t EFF_sa;
+ __IO uint32_t EFF_GRP_sa;
+ __IO uint32_t ENDofTable;
+ __I uint32_t LUTerrAd;
+ __I uint32_t LUTerr;
+ __IO uint32_t FCANIE;
+ __IO uint32_t FCANIC0;
+ __IO uint32_t FCANIC1;
+} LPC_CANAF_TypeDef;
+
+typedef struct /* Central Registers */
+{
+ __I uint32_t CANTxSR;
+ __I uint32_t CANRxSR;
+ __I uint32_t CANMSR;
+} LPC_CANCR_TypeDef;
+
+typedef struct /* Controller Registers */
+{
+ __IO uint32_t MOD;
+ __O uint32_t CMR;
+ __IO uint32_t GSR;
+ __I uint32_t ICR;
+ __IO uint32_t IER;
+ __IO uint32_t BTR;
+ __IO uint32_t EWL;
+ __I uint32_t SR;
+ __IO uint32_t RFS;
+ __IO uint32_t RID;
+ __IO uint32_t RDA;
+ __IO uint32_t RDB;
+ __IO uint32_t TFI1;
+ __IO uint32_t TID1;
+ __IO uint32_t TDA1;
+ __IO uint32_t TDB1;
+ __IO uint32_t TFI2;
+ __IO uint32_t TID2;
+ __IO uint32_t TDA2;
+ __IO uint32_t TDB2;
+ __IO uint32_t TFI3;
+ __IO uint32_t TID3;
+ __IO uint32_t TDA3;
+ __IO uint32_t TDB3;
+} LPC_CAN_TypeDef;
+
+/*------------- General Purpose Direct Memory Access (GPDMA) -----------------*/
+typedef struct /* Common Registers */
+{
+ __I uint32_t DMACIntStat;
+ __I uint32_t DMACIntTCStat;
+ __O uint32_t DMACIntTCClear;
+ __I uint32_t DMACIntErrStat;
+ __O uint32_t DMACIntErrClr;
+ __I uint32_t DMACRawIntTCStat;
+ __I uint32_t DMACRawIntErrStat;
+ __I uint32_t DMACEnbldChns;
+ __IO uint32_t DMACSoftBReq;
+ __IO uint32_t DMACSoftSReq;
+ __IO uint32_t DMACSoftLBReq;
+ __IO uint32_t DMACSoftLSReq;
+ __IO uint32_t DMACConfig;
+ __IO uint32_t DMACSync;
+} LPC_GPDMA_TypeDef;
+
+typedef struct /* Channel Registers */
+{
+ __IO uint32_t DMACCSrcAddr;
+ __IO uint32_t DMACCDestAddr;
+ __IO uint32_t DMACCLLI;
+ __IO uint32_t DMACCControl;
+ __IO uint32_t DMACCConfig;
+} LPC_GPDMACH_TypeDef;
+
+/*------------- Universal Serial Bus (USB) -----------------------------------*/
+typedef struct
+{
+ __I uint32_t HcRevision; /* USB Host Registers */
+ __IO uint32_t HcControl;
+ __IO uint32_t HcCommandStatus;
+ __IO uint32_t HcInterruptStatus;
+ __IO uint32_t HcInterruptEnable;
+ __IO uint32_t HcInterruptDisable;
+ __IO uint32_t HcHCCA;
+ __I uint32_t HcPeriodCurrentED;
+ __IO uint32_t HcControlHeadED;
+ __IO uint32_t HcControlCurrentED;
+ __IO uint32_t HcBulkHeadED;
+ __IO uint32_t HcBulkCurrentED;
+ __I uint32_t HcDoneHead;
+ __IO uint32_t HcFmInterval;
+ __I uint32_t HcFmRemaining;
+ __I uint32_t HcFmNumber;
+ __IO uint32_t HcPeriodicStart;
+ __IO uint32_t HcLSTreshold;
+ __IO uint32_t HcRhDescriptorA;
+ __IO uint32_t HcRhDescriptorB;
+ __IO uint32_t HcRhStatus;
+ __IO uint32_t HcRhPortStatus1;
+ __IO uint32_t HcRhPortStatus2;
+ uint32_t RESERVED0[40];
+ __I uint32_t Module_ID;
+
+ __I uint32_t OTGIntSt; /* USB On-The-Go Registers */
+ __IO uint32_t OTGIntEn;
+ __O uint32_t OTGIntSet;
+ __O uint32_t OTGIntClr;
+ __IO uint32_t OTGStCtrl;
+ __IO uint32_t OTGTmr;
+ uint32_t RESERVED1[58];
+
+ __I uint32_t USBDevIntSt; /* USB Device Interrupt Registers */
+ __IO uint32_t USBDevIntEn;
+ __O uint32_t USBDevIntClr;
+ __O uint32_t USBDevIntSet;
+
+ __O uint32_t USBCmdCode; /* USB Device SIE Command Registers */
+ __I uint32_t USBCmdData;
+
+ __I uint32_t USBRxData; /* USB Device Transfer Registers */
+ __O uint32_t USBTxData;
+ __I uint32_t USBRxPLen;
+ __O uint32_t USBTxPLen;
+ __IO uint32_t USBCtrl;
+ __O uint32_t USBDevIntPri;
+
+ __I uint32_t USBEpIntSt; /* USB Device Endpoint Interrupt Regs */
+ __IO uint32_t USBEpIntEn;
+ __O uint32_t USBEpIntClr;
+ __O uint32_t USBEpIntSet;
+ __O uint32_t USBEpIntPri;
+
+ __IO uint32_t USBReEp; /* USB Device Endpoint Realization Reg*/
+ __O uint32_t USBEpInd;
+ __IO uint32_t USBMaxPSize;
+
+ __I uint32_t USBDMARSt; /* USB Device DMA Registers */
+ __O uint32_t USBDMARClr;
+ __O uint32_t USBDMARSet;
+ uint32_t RESERVED2[9];
+ __IO uint32_t USBUDCAH;
+ __I uint32_t USBEpDMASt;
+ __O uint32_t USBEpDMAEn;
+ __O uint32_t USBEpDMADis;
+ __I uint32_t USBDMAIntSt;
+ __IO uint32_t USBDMAIntEn;
+ uint32_t RESERVED3[2];
+ __I uint32_t USBEoTIntSt;
+ __O uint32_t USBEoTIntClr;
+ __O uint32_t USBEoTIntSet;
+ __I uint32_t USBNDDRIntSt;
+ __O uint32_t USBNDDRIntClr;
+ __O uint32_t USBNDDRIntSet;
+ __I uint32_t USBSysErrIntSt;
+ __O uint32_t USBSysErrIntClr;
+ __O uint32_t USBSysErrIntSet;
+ uint32_t RESERVED4[15];
+
+ union {
+ __I uint32_t I2C_RX; /* USB OTG I2C Registers */
+ __O uint32_t I2C_TX;
+ };
+ __I uint32_t I2C_STS;
+ __IO uint32_t I2C_CTL;
+ __IO uint32_t I2C_CLKHI;
+ __O uint32_t I2C_CLKLO;
+ uint32_t RESERVED5[824];
+
+ union {
+ __IO uint32_t USBClkCtrl; /* USB Clock Control Registers */
+ __IO uint32_t OTGClkCtrl;
+ };
+ union {
+ __I uint32_t USBClkSt;
+ __I uint32_t OTGClkSt;
+ };
+} LPC_USB_TypeDef;
+
+/*------------- Ethernet Media Access Controller (EMAC) ----------------------*/
+typedef struct
+{
+ __IO uint32_t MAC1; /* MAC Registers */
+ __IO uint32_t MAC2;
+ __IO uint32_t IPGT;
+ __IO uint32_t IPGR;
+ __IO uint32_t CLRT;
+ __IO uint32_t MAXF;
+ __IO uint32_t SUPP;
+ __IO uint32_t TEST;
+ __IO uint32_t MCFG;
+ __IO uint32_t MCMD;
+ __IO uint32_t MADR;
+ __O uint32_t MWTD;
+ __I uint32_t MRDD;
+ __I uint32_t MIND;
+ uint32_t RESERVED0[2];
+ __IO uint32_t SA0;
+ __IO uint32_t SA1;
+ __IO uint32_t SA2;
+ uint32_t RESERVED1[45];
+ __IO uint32_t Command; /* Control Registers */
+ __I uint32_t Status;
+ __IO uint32_t RxDescriptor;
+ __IO uint32_t RxStatus;
+ __IO uint32_t RxDescriptorNumber;
+ __I uint32_t RxProduceIndex;
+ __IO uint32_t RxConsumeIndex;
+ __IO uint32_t TxDescriptor;
+ __IO uint32_t TxStatus;
+ __IO uint32_t TxDescriptorNumber;
+ __IO uint32_t TxProduceIndex;
+ __I uint32_t TxConsumeIndex;
+ uint32_t RESERVED2[10];
+ __I uint32_t TSV0;
+ __I uint32_t TSV1;
+ __I uint32_t RSV;
+ uint32_t RESERVED3[3];
+ __IO uint32_t FlowControlCounter;
+ __I uint32_t FlowControlStatus;
+ uint32_t RESERVED4[34];
+ __IO uint32_t RxFilterCtrl; /* Rx Filter Registers */
+ __IO uint32_t RxFilterWoLStatus;
+ __IO uint32_t RxFilterWoLClear;
+ uint32_t RESERVED5;
+ __IO uint32_t HashFilterL;
+ __IO uint32_t HashFilterH;
+ uint32_t RESERVED6[882];
+ __I uint32_t IntStatus; /* Module Control Registers */
+ __IO uint32_t IntEnable;
+ __O uint32_t IntClear;
+ __O uint32_t IntSet;
+ uint32_t RESERVED7;
+ __IO uint32_t PowerDown;
+ uint32_t RESERVED8;
+ __IO uint32_t Module_ID;
+} LPC_EMAC_TypeDef;
+
+#if defined ( __CC_ARM )
+#pragma no_anon_unions
+#endif
+
+
+/******************************************************************************/
+/* Peripheral memory map */
+/******************************************************************************/
+/* Base addresses */
+#define LPC_FLASH_BASE (0x00000000UL)
+#define LPC_RAM_BASE (0x10000000UL)
+#define LPC_GPIO_BASE (0x2009C000UL)
+#define LPC_APB0_BASE (0x40000000UL)
+#define LPC_APB1_BASE (0x40080000UL)
+#define LPC_AHB_BASE (0x50000000UL)
+#define LPC_CM3_BASE (0xE0000000UL)
+
+/* APB0 peripherals */
+#define LPC_WDT_BASE (LPC_APB0_BASE + 0x00000)
+#define LPC_TIM0_BASE (LPC_APB0_BASE + 0x04000)
+#define LPC_TIM1_BASE (LPC_APB0_BASE + 0x08000)
+#define LPC_UART0_BASE (LPC_APB0_BASE + 0x0C000)
+#define LPC_UART1_BASE (LPC_APB0_BASE + 0x10000)
+#define LPC_PWM1_BASE (LPC_APB0_BASE + 0x18000)
+#define LPC_I2C0_BASE (LPC_APB0_BASE + 0x1C000)
+#define LPC_SPI_BASE (LPC_APB0_BASE + 0x20000)
+#define LPC_RTC_BASE (LPC_APB0_BASE + 0x24000)
+#define LPC_GPIOINT_BASE (LPC_APB0_BASE + 0x28080)
+#define LPC_PINCON_BASE (LPC_APB0_BASE + 0x2C000)
+#define LPC_SSP1_BASE (LPC_APB0_BASE + 0x30000)
+#define LPC_ADC_BASE (LPC_APB0_BASE + 0x34000)
+#define LPC_CANAF_RAM_BASE (LPC_APB0_BASE + 0x38000)
+#define LPC_CANAF_BASE (LPC_APB0_BASE + 0x3C000)
+#define LPC_CANCR_BASE (LPC_APB0_BASE + 0x40000)
+#define LPC_CAN1_BASE (LPC_APB0_BASE + 0x44000)
+#define LPC_CAN2_BASE (LPC_APB0_BASE + 0x48000)
+#define LPC_I2C1_BASE (LPC_APB0_BASE + 0x5C000)
+
+/* APB1 peripherals */
+#define LPC_SSP0_BASE (LPC_APB1_BASE + 0x08000)
+#define LPC_DAC_BASE (LPC_APB1_BASE + 0x0C000)
+#define LPC_TIM2_BASE (LPC_APB1_BASE + 0x10000)
+#define LPC_TIM3_BASE (LPC_APB1_BASE + 0x14000)
+#define LPC_UART2_BASE (LPC_APB1_BASE + 0x18000)
+#define LPC_UART3_BASE (LPC_APB1_BASE + 0x1C000)
+#define LPC_I2C2_BASE (LPC_APB1_BASE + 0x20000)
+#define LPC_I2S_BASE (LPC_APB1_BASE + 0x28000)
+#define LPC_RIT_BASE (LPC_APB1_BASE + 0x30000)
+#define LPC_MCPWM_BASE (LPC_APB1_BASE + 0x38000)
+#define LPC_QEI_BASE (LPC_APB1_BASE + 0x3C000)
+#define LPC_SC_BASE (LPC_APB1_BASE + 0x7C000)
+
+/* AHB peripherals */
+#define LPC_EMAC_BASE (LPC_AHB_BASE + 0x00000)
+#define LPC_GPDMA_BASE (LPC_AHB_BASE + 0x04000)
+#define LPC_GPDMACH0_BASE (LPC_AHB_BASE + 0x04100)
+#define LPC_GPDMACH1_BASE (LPC_AHB_BASE + 0x04120)
+#define LPC_GPDMACH2_BASE (LPC_AHB_BASE + 0x04140)
+#define LPC_GPDMACH3_BASE (LPC_AHB_BASE + 0x04160)
+#define LPC_GPDMACH4_BASE (LPC_AHB_BASE + 0x04180)
+#define LPC_GPDMACH5_BASE (LPC_AHB_BASE + 0x041A0)
+#define LPC_GPDMACH6_BASE (LPC_AHB_BASE + 0x041C0)
+#define LPC_GPDMACH7_BASE (LPC_AHB_BASE + 0x041E0)
+#define LPC_USB_BASE (LPC_AHB_BASE + 0x0C000)
+
+/* GPIOs */
+#define LPC_GPIO0_BASE (LPC_GPIO_BASE + 0x00000)
+#define LPC_GPIO1_BASE (LPC_GPIO_BASE + 0x00020)
+#define LPC_GPIO2_BASE (LPC_GPIO_BASE + 0x00040)
+#define LPC_GPIO3_BASE (LPC_GPIO_BASE + 0x00060)
+#define LPC_GPIO4_BASE (LPC_GPIO_BASE + 0x00080)
+
+
+/******************************************************************************/
+/* Peripheral declaration */
+/******************************************************************************/
+#define LPC_SC ((LPC_SC_TypeDef *) LPC_SC_BASE )
+#define LPC_GPIO0 ((LPC_GPIO_TypeDef *) LPC_GPIO0_BASE )
+#define LPC_GPIO1 ((LPC_GPIO_TypeDef *) LPC_GPIO1_BASE )
+#define LPC_GPIO2 ((LPC_GPIO_TypeDef *) LPC_GPIO2_BASE )
+#define LPC_GPIO3 ((LPC_GPIO_TypeDef *) LPC_GPIO3_BASE )
+#define LPC_GPIO4 ((LPC_GPIO_TypeDef *) LPC_GPIO4_BASE )
+#define LPC_WDT ((LPC_WDT_TypeDef *) LPC_WDT_BASE )
+#define LPC_TIM0 ((LPC_TIM_TypeDef *) LPC_TIM0_BASE )
+#define LPC_TIM1 ((LPC_TIM_TypeDef *) LPC_TIM1_BASE )
+#define LPC_TIM2 ((LPC_TIM_TypeDef *) LPC_TIM2_BASE )
+#define LPC_TIM3 ((LPC_TIM_TypeDef *) LPC_TIM3_BASE )
+#define LPC_RIT ((LPC_RIT_TypeDef *) LPC_RIT_BASE )
+#define LPC_UART0 ((LPC_UART0_TypeDef *) LPC_UART0_BASE )
+#define LPC_UART1 ((LPC_UART1_TypeDef *) LPC_UART1_BASE )
+#define LPC_UART2 ((LPC_UART_TypeDef *) LPC_UART2_BASE )
+#define LPC_UART3 ((LPC_UART_TypeDef *) LPC_UART3_BASE )
+#define LPC_PWM1 ((LPC_PWM_TypeDef *) LPC_PWM1_BASE )
+#define LPC_I2C0 ((LPC_I2C_TypeDef *) LPC_I2C0_BASE )
+#define LPC_I2C1 ((LPC_I2C_TypeDef *) LPC_I2C1_BASE )
+#define LPC_I2C2 ((LPC_I2C_TypeDef *) LPC_I2C2_BASE )
+#define LPC_I2S ((LPC_I2S_TypeDef *) LPC_I2S_BASE )
+#define LPC_SPI ((LPC_SPI_TypeDef *) LPC_SPI_BASE )
+#define LPC_RTC ((LPC_RTC_TypeDef *) LPC_RTC_BASE )
+#define LPC_GPIOINT ((LPC_GPIOINT_TypeDef *) LPC_GPIOINT_BASE )
+#define LPC_PINCON ((LPC_PINCON_TypeDef *) LPC_PINCON_BASE )
+#define LPC_SSP0 ((LPC_SSP_TypeDef *) LPC_SSP0_BASE )
+#define LPC_SSP1 ((LPC_SSP_TypeDef *) LPC_SSP1_BASE )
+#define LPC_ADC ((LPC_ADC_TypeDef *) LPC_ADC_BASE )
+#define LPC_DAC ((LPC_DAC_TypeDef *) LPC_DAC_BASE )
+#define LPC_CANAF_RAM ((LPC_CANAF_RAM_TypeDef *) LPC_CANAF_RAM_BASE)
+#define LPC_CANAF ((LPC_CANAF_TypeDef *) LPC_CANAF_BASE )
+#define LPC_CANCR ((LPC_CANCR_TypeDef *) LPC_CANCR_BASE )
+#define LPC_CAN1 ((LPC_CAN_TypeDef *) LPC_CAN1_BASE )
+#define LPC_CAN2 ((LPC_CAN_TypeDef *) LPC_CAN2_BASE )
+#define LPC_MCPWM ((LPC_MCPWM_TypeDef *) LPC_MCPWM_BASE )
+#define LPC_QEI ((LPC_QEI_TypeDef *) LPC_QEI_BASE )
+#define LPC_EMAC ((LPC_EMAC_TypeDef *) LPC_EMAC_BASE )
+#define LPC_GPDMA ((LPC_GPDMA_TypeDef *) LPC_GPDMA_BASE )
+#define LPC_GPDMACH0 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH0_BASE )
+#define LPC_GPDMACH1 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH1_BASE )
+#define LPC_GPDMACH2 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH2_BASE )
+#define LPC_GPDMACH3 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH3_BASE )
+#define LPC_GPDMACH4 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH4_BASE )
+#define LPC_GPDMACH5 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH5_BASE )
+#define LPC_GPDMACH6 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH6_BASE )
+#define LPC_GPDMACH7 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH7_BASE )
+#define LPC_USB ((LPC_USB_TypeDef *) LPC_USB_BASE )
+
+#endif // __LPC17xx_H__
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/TARGET_NXP/TARGET_LPC176X/PeripheralNames.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,111 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ UART_0 = (int)LPC_UART0_BASE,
+ UART_1 = (int)LPC_UART1_BASE,
+ UART_2 = (int)LPC_UART2_BASE,
+ UART_3 = (int)LPC_UART3_BASE
+} UARTName;
+
+typedef enum {
+ ADC0_0 = 0,
+ ADC0_1,
+ ADC0_2,
+ ADC0_3,
+ ADC0_4,
+ ADC0_5,
+ ADC0_6,
+ ADC0_7
+} ADCName;
+
+typedef enum {
+ DAC_0 = 0
+} DACName;
+
+typedef enum {
+ SPI_0 = (int)LPC_SSP0_BASE,
+ SPI_1 = (int)LPC_SSP1_BASE
+} SPIName;
+
+typedef enum {
+ I2C_0 = (int)LPC_I2C0_BASE,
+ I2C_1 = (int)LPC_I2C1_BASE,
+ I2C_2 = (int)LPC_I2C2_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = 1,
+ PWM_2,
+ PWM_3,
+ PWM_4,
+ PWM_5,
+ PWM_6
+} PWMName;
+
+typedef enum {
+ CAN_1 = (int)LPC_CAN1_BASE,
+ CAN_2 = (int)LPC_CAN2_BASE
+} CANName;
+
+#define STDIO_UART_TX USBTX
+#define STDIO_UART_RX USBRX
+#define STDIO_UART UART_0
+
+// Default peripherals
+#define MBED_SPI0 p5, p6, p7, p8
+#define MBED_SPI1 p11, p12, p13, p14
+
+#define MBED_UART0 p9, p10
+#define MBED_UART1 p13, p14
+#define MBED_UART2 p28, p27
+#define MBED_UARTUSB USBTX, USBRX
+
+#define MBED_I2C0 p28, p27
+#define MBED_I2C1 p9, p10
+
+#define MBED_CAN0 p30, p29
+
+#define MBED_ANALOGOUT0 p18
+
+#define MBED_ANALOGIN0 p15
+#define MBED_ANALOGIN1 p16
+#define MBED_ANALOGIN2 p17
+#define MBED_ANALOGIN3 p18
+#define MBED_ANALOGIN4 p19
+#define MBED_ANALOGIN5 p20
+
+#define MBED_PWMOUT0 p26
+#define MBED_PWMOUT1 p25
+#define MBED_PWMOUT2 p24
+#define MBED_PWMOUT3 p23
+#define MBED_PWMOUT4 p22
+#define MBED_PWMOUT5 p21
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/TARGET_NXP/TARGET_LPC176X/PortNames.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,34 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ Port0 = 0,
+ Port1 = 1,
+ Port2 = 2,
+ Port3 = 3,
+ Port4 = 4
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/TARGET_NXP/TARGET_LPC176X/TARGET_MBED_LPC1768/PinNames.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,139 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 5
+
+typedef enum {
+ // LPC Pin Names
+ P0_0 = LPC_GPIO0_BASE,
+ P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
+ P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
+ P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31,
+ P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31,
+ P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31,
+
+ // mbed DIP Pin Names
+ p5 = P0_9,
+ p6 = P0_8,
+ p7 = P0_7,
+ p8 = P0_6,
+ p9 = P0_0,
+ p10 = P0_1,
+ p11 = P0_18,
+ p12 = P0_17,
+ p13 = P0_15,
+ p14 = P0_16,
+ p15 = P0_23,
+ p16 = P0_24,
+ p17 = P0_25,
+ p18 = P0_26,
+ p19 = P1_30,
+ p20 = P1_31,
+ p21 = P2_5,
+ p22 = P2_4,
+ p23 = P2_3,
+ p24 = P2_2,
+ p25 = P2_1,
+ p26 = P2_0,
+ p27 = P0_11,
+ p28 = P0_10,
+ p29 = P0_5,
+ p30 = P0_4,
+
+ // Other mbed Pin Names
+#ifdef MCB1700
+ LED1 = P1_28,
+ LED2 = P1_29,
+ LED3 = P1_31,
+ LED4 = P2_2,
+#else
+ LED1 = P1_18,
+ LED2 = P1_20,
+ LED3 = P1_21,
+ LED4 = P1_23,
+#endif
+ USBTX = P0_2,
+ USBRX = P0_3,
+
+ // Arch Pro Pin Names
+ D0 = P4_29,
+ D1 = P4_28,
+ D2 = P0_4,
+ D3 = P0_5,
+ D4 = P2_2,
+ D5 = P2_3,
+ D6 = P2_4,
+ D7 = P2_5,
+ D8 = P0_0,
+ D9 = P0_1,
+ D10 = P0_6,
+ D11 = P0_9,
+ D12 = P0_8,
+ D13 = P0_7,
+ D14 = P0_27,
+ D15 = P0_28,
+
+ A0 = P0_23,
+ A1 = P0_24,
+ A2 = P0_25,
+ A3 = P0_26,
+ A4 = P1_30,
+ A5 = P1_31,
+
+ I2C_SCL = D15,
+ I2C_SDA = D14,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullUp = 0,
+ PullDown = 3,
+ PullNone = 2,
+ Repeater = 1,
+ OpenDrain = 4,
+ PullDefault = PullDown
+} PinMode;
+
+// version of PINCON_TypeDef using register arrays
+typedef struct {
+ __IO uint32_t PINSEL[11];
+ uint32_t RESERVED0[5];
+ __IO uint32_t PINMODE[10];
+ __IO uint32_t PINMODE_OD[5];
+} PINCONARRAY_TypeDef;
+
+#define PINCONARRAY ((PINCONARRAY_TypeDef *)LPC_PINCON_BASE)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_LPC1768/TARGET_NXP/TARGET_LPC176X/TARGET_MBED_LPC1768/device.h Fri Dec 03 23:00:34 2021 +0000 @@ -0,0 +1,60 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 +#define DEVICE_SERIAL_FC 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 1 + +#define DEVICE_RTC 1 + +#define DEVICE_ETHERNET 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 1 +#define DEVICE_LOCALFILESYSTEM 1 +#define DEVICE_ID_LENGTH 32 +#define DEVICE_MAC_OFFSET 20 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 1 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/TARGET_NXP/TARGET_LPC176X/TARGET_MBED_LPC1768/reserved_pins.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,8 @@
+// List of reserved pins for MBED LPC1768
+
+#ifndef RESERVED_PINS_H
+#define RESERVED_PINS_H
+
+#define TARGET_RESERVED_PINS {}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/TARGET_NXP/TARGET_LPC176X/gpio_object.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_set;
+ __IO uint32_t *reg_clr;
+ __I uint32_t *reg_in;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value)
+ *obj->reg_set = obj->mask;
+ else
+ *obj->reg_clr = obj->mask;
+}
+
+static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/TARGET_NXP/TARGET_LPC176X/objects.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,78 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ uint32_t port;
+ uint32_t pin;
+ uint32_t ch;
+};
+
+struct port_s {
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_out;
+ __I uint32_t *reg_in;
+ PortName port;
+ uint32_t mask;
+};
+
+struct pwmout_s {
+ __IO uint32_t *MR;
+ PWMName pwm;
+};
+
+struct serial_s {
+ LPC_UART_TypeDef *uart;
+ int index;
+};
+
+struct analogin_s {
+ ADCName adc;
+};
+
+struct dac_s {
+ DACName dac;
+};
+
+struct can_s {
+ LPC_CAN_TypeDef *dev;
+ int index;
+};
+
+struct i2c_s {
+ LPC_I2C_TypeDef *i2c;
+};
+
+struct spi_s {
+ LPC_SSP_TypeDef *spi;
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/TOOLCHAIN_GCC_CR/LPC1768.ld Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,154 @@
+/* mbed - LPC1768 linker script
+ * Based linker script generated by Code Red Technologies Red Suite 4.1
+ */
+GROUP(libgcc.a libc.a libstdc++.a libm.a libcr_newlib_nohost.a crti.o crtn.o crtbegin.o crtend.o)
+
+MEMORY
+{
+ /* Define each memory region */
+ MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512k */
+ RamLoc32 (rwx) : ORIGIN = 0x100000C8, LENGTH = 0x7F38 /* 32k */
+ RamAHB32 (rwx) : ORIGIN = 0x2007c000, LENGTH = 0x8000 /* 32k */
+
+}
+ /* Define a symbol for the top of each memory region */
+ __top_MFlash512 = 0x0 + 0x80000;
+ __top_RamLoc32 = 0x10000000 + 0x8000;
+ __top_RamAHB32 = 0x2007c000 + 0x8000;
+
+ENTRY(ResetISR)
+
+SECTIONS
+{
+
+ /* MAIN TEXT SECTION */
+ .text : ALIGN(4)
+ {
+ FILL(0xff)
+ KEEP(*(.isr_vector))
+
+ /* Global Section Table */
+ . = ALIGN(4) ;
+ __section_table_start = .;
+ __data_section_table = .;
+ LONG(LOADADDR(.data));
+ LONG( ADDR(.data)) ;
+ LONG( SIZEOF(.data));
+ LONG(LOADADDR(.data_RAM2));
+ LONG( ADDR(.data_RAM2)) ;
+ LONG( SIZEOF(.data_RAM2));
+ __data_section_table_end = .;
+ __bss_section_table = .;
+ LONG( ADDR(.bss));
+ LONG( SIZEOF(.bss));
+ LONG( ADDR(.bss_RAM2));
+ LONG( SIZEOF(.bss_RAM2));
+ __bss_section_table_end = .;
+ __section_table_end = . ;
+ /* End of Global Section Table */
+
+
+ *(.after_vectors*)
+
+ *(.text*)
+ *(.rodata .rodata.*)
+ . = ALIGN(4);
+
+ /* C++ constructors etc */
+ . = ALIGN(4);
+ KEEP(*(.init))
+
+ . = ALIGN(4);
+ __preinit_array_start = .;
+ KEEP (*(.preinit_array))
+ __preinit_array_end = .;
+
+ . = ALIGN(4);
+ __init_array_start = .;
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ __init_array_end = .;
+
+ KEEP(*(.fini));
+
+ . = ALIGN(0x4);
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*crtend.o(.ctors))
+
+ . = ALIGN(0x4);
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*crtend.o(.dtors))
+ /* End C++ */
+ } > MFlash512
+
+ /*
+ * for exception handling/unwind - some Newlib functions (in common
+ * with C++ and STDC++) use this.
+ */
+ .ARM.extab : ALIGN(4)
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > MFlash512
+ __exidx_start = .;
+
+ .ARM.exidx : ALIGN(4)
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > MFlash512
+ __exidx_end = .;
+
+ _etext = .;
+
+
+ .data_RAM2 : ALIGN(4)
+ {
+ FILL(0xff)
+ *(.data.$RAM2*)
+ *(.data.$RamAHB32*)
+ . = ALIGN(4) ;
+ } > RamAHB32 AT>MFlash512
+
+ /* MAIN DATA SECTION */
+
+ .uninit_RESERVED : ALIGN(4)
+ {
+ KEEP(*(.bss.$RESERVED*))
+ } > RamLoc32
+
+ .data : ALIGN(4)
+ {
+ FILL(0xff)
+ _data = .;
+ *(vtable)
+ *(.data*)
+ . = ALIGN(4) ;
+ _edata = .;
+ } > RamLoc32 AT>MFlash512
+
+
+ .bss_RAM2 : ALIGN(4)
+ {
+ *(.bss.$RAM2*)
+ *(.bss.$RamAHB32*)
+ . = ALIGN(4) ;
+ } > RamAHB32
+
+ /* MAIN BSS SECTION */
+ .bss : ALIGN(4)
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4) ;
+ _ebss = .;
+ PROVIDE(end = .);
+ __end__ = .;
+ } > RamLoc32
+
+ PROVIDE(_pvHeapStart = .);
+ PROVIDE(_vStackTop = __top_RamLoc32 - 0);
+}
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/startup_LPC17xx.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/system_LPC17xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_LPC1768/cmsis.h Fri Dec 03 23:00:34 2021 +0000 @@ -0,0 +1,13 @@ +/* mbed Microcontroller Library - CMSIS + * Copyright (C) 2009-2011 ARM Limited. All rights reserved. + * + * A generic CMSIS include header, pulling in LPC1768 specifics + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "LPC17xx.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/cmsis_nvic.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,51 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2011 ARM Limited. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+#include "cmsis.h"
+
+#define NVIC_NUM_VECTORS (16 + 33)
+#define NVIC_USER_IRQ_OFFSET 16
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/core_ca9.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,271 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/core_caFunc.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,1161 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 9 May 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW, Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#error IAR Compiler support not implemented for Cortex-A
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+
+/* GNU gcc specific functions */
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i");
+}
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __disable_irq(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, cpsr" : "=r" (result));
+ __ASM volatile ("cpsid i");
+ return(result & 0x80);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, apsr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+#endif
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPSR(void)
+{
+#if 1
+ register uint32_t __regCPSR;
+ __ASM volatile ("mrs %0, cpsr" : "=r" (__regCPSR));
+#else
+ register uint32_t __regCPSR __ASM("cpsr");
+#endif
+ return(__regCPSR);
+}
+
+#if 0
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ register uint32_t __regSP __ASM("sp");
+ __regSP = topOfStack;
+}
+#endif
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_LR(void)
+{
+ register uint32_t __reglr __ASM("lr");
+ return(__reglr);
+}
+
+#if 0
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ register uint32_t __reglr __ASM("lr");
+ __reglr = lr;
+}
+#endif
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+extern void __set_CPS_USR(void);
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpscr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ __ASM volatile ("vmsr fpscr, %0" : : "r" (fpscr) );
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpexc" : "=r" (result));
+ return (result);
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ __ASM volatile ("vmsr fpexc, %0" : : "r" (fpexc));
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPACR(void)
+{
+#if 1
+ register uint32_t __regCPACR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 2" : "=r" (__regCPACR));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+#endif
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 2" : : "r" (cpacr));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+#endif
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CBAR() {
+#if 1
+ register uint32_t __regCBAR;
+ __ASM volatile ("mrc p15, 4, %0, c15, c0, 0" : "=r" (__regCBAR));
+#else
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+#endif
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_TTBR0() {
+#if 1
+ register uint32_t __regTTBR0;
+ __ASM volatile ("mrc p15, 0, %0, c2, c0, 0" : "=r" (__regTTBR0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+#endif
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c2, c0, 0" : : "r" (ttbr0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+#endif
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_DACR() {
+#if 1
+ register uint32_t __regDACR;
+ __ASM volatile ("mrc p15, 0, %0, c3, c0, 0" : "=r" (__regDACR));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+#endif
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_DACR(uint32_t dacr) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c3, c0, 0" : : "r" (dacr));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+#endif
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 0" : : "r" (sctlr));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+#endif
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_SCTLR() {
+#if 1
+ register uint32_t __regSCTLR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (__regSCTLR));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+#endif
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c8, c7, 0" : : "r" (0));
+#else
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+#endif
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_btac(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0));
+#else
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_icache_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+#else
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c10, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c14, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+extern void __v7_all_cache(uint32_t op);
+
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_LPC1768/core_caInstr.h Fri Dec 03 23:00:34 2021 +0000 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/core_ca_mmu.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,848 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for
+; * VE_A9_MP Device Series
+; * @version V1.01
+; * @date 25 March 2013
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not suported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/core_cm0.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/core_cm0plus.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/core_cm3.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/core_cm4.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/core_cm4_simd.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/core_cmFunc.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/core_cmInstr.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC1768/system_LPC17xx.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,60 @@
+/******************************************************************************
+ * @file: system_LPC17xx.h
+ * @purpose: CMSIS Cortex-M3 Device Peripheral Access Layer Header File
+ * for the NXP LPC17xx Device Series
+ * @version: V1.02
+ * @date: 27. July 2009
+ *----------------------------------------------------------------------------
+ *
+ * Copyright (C) 2009 ARM Limited. All rights reserved.
+ *
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M3
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+
+#ifndef __SYSTEM_LPC17xx_H
+#define __SYSTEM_LPC17xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+ * Initialize the system
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Setup the microcontroller system.
+ * Initialize the System and update the SystemCoreClock variable.
+ */
+extern void SystemInit (void);
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Updates the SystemCoreClock with current core Clock
+ * retrieved from cpu registers.
+ */
+extern void SystemCoreClockUpdate (void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __SYSTEM_LPC17xx_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Ticker.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,127 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TICKER_H
+#define MBED_TICKER_H
+
+#include "TimerEvent.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** A Ticker is used to call a function at a recurring interval
+ *
+ * You can use as many seperate Ticker objects as you require.
+ *
+ * Example:
+ * @code
+ * // Toggle the blinking led after 5 seconds
+ *
+ * #include "mbed.h"
+ *
+ * Ticker timer;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ *
+ * int flip = 0;
+ *
+ * void attime() {
+ * flip = !flip;
+ * }
+ *
+ * int main() {
+ * timer.attach(&attime, 5);
+ * while(1) {
+ * if(flip == 0) {
+ * led1 = !led1;
+ * } else {
+ * led2 = !led2;
+ * }
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class Ticker : public TimerEvent {
+
+public:
+ Ticker() : TimerEvent() {
+ }
+
+ Ticker(const ticker_data_t *data) : TimerEvent(data) {
+ }
+
+ /** Attach a function to be called by the Ticker, specifiying the interval in seconds
+ *
+ * @param fptr pointer to the function to be called
+ * @param t the time between calls in seconds
+ */
+ void attach(void (*fptr)(void), float t) {
+ attach_us(fptr, t * 1000000.0f);
+ }
+
+ /** Attach a member function to be called by the Ticker, specifiying the interval in seconds
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param t the time between calls in seconds
+ */
+ template<typename T>
+ void attach(T* tptr, void (T::*mptr)(void), float t) {
+ attach_us(tptr, mptr, t * 1000000.0f);
+ }
+
+ /** Attach a function to be called by the Ticker, specifiying the interval in micro-seconds
+ *
+ * @param fptr pointer to the function to be called
+ * @param t the time between calls in micro-seconds
+ */
+ void attach_us(void (*fptr)(void), timestamp_t t) {
+ _function.attach(fptr);
+ setup(t);
+ }
+
+ /** Attach a member function to be called by the Ticker, specifiying the interval in micro-seconds
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param t the time between calls in micro-seconds
+ */
+ template<typename T>
+ void attach_us(T* tptr, void (T::*mptr)(void), timestamp_t t) {
+ _function.attach(tptr, mptr);
+ setup(t);
+ }
+
+ virtual ~Ticker() {
+ detach();
+ }
+
+ /** Detach the function
+ */
+ void detach();
+
+protected:
+ void setup(timestamp_t t);
+ virtual void handler();
+
+protected:
+ timestamp_t _delay; /**< Time delay (in microseconds) for re-setting the multi-shot callback. */
+ FunctionPointer _function; /**< Callback. */
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Timeout.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,59 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMEOUT_H
+#define MBED_TIMEOUT_H
+
+#include "Ticker.h"
+
+namespace mbed {
+
+/** A Timeout is used to call a function at a point in the future
+ *
+ * You can use as many seperate Timeout objects as you require.
+ *
+ * Example:
+ * @code
+ * // Blink until timeout.
+ *
+ * #include "mbed.h"
+ *
+ * Timeout timeout;
+ * DigitalOut led(LED1);
+ *
+ * int on = 1;
+ *
+ * void attimeout() {
+ * on = 0;
+ * }
+ *
+ * int main() {
+ * timeout.attach(&attimeout, 5);
+ * while(on) {
+ * led = !led;
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class Timeout : public Ticker {
+
+protected:
+ virtual void handler();
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Timer.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,91 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMER_H
+#define MBED_TIMER_H
+
+#include "platform.h"
+#include "ticker_api.h"
+
+namespace mbed {
+
+/** A general purpose timer
+ *
+ * Example:
+ * @code
+ * // Count the time to toggle a LED
+ *
+ * #include "mbed.h"
+ *
+ * Timer timer;
+ * DigitalOut led(LED1);
+ * int begin, end;
+ *
+ * int main() {
+ * timer.start();
+ * begin = timer.read_us();
+ * led = !led;
+ * end = timer.read_us();
+ * printf("Toggle the led takes %d us", end - begin);
+ * }
+ * @endcode
+ */
+class Timer {
+
+public:
+ Timer();
+ Timer(const ticker_data_t *data);
+
+ /** Start the timer
+ */
+ void start();
+
+ /** Stop the timer
+ */
+ void stop();
+
+ /** Reset the timer to 0.
+ *
+ * If it was already counting, it will continue
+ */
+ void reset();
+
+ /** Get the time passed in seconds
+ */
+ float read();
+
+ /** Get the time passed in mili-seconds
+ */
+ int read_ms();
+
+ /** Get the time passed in micro-seconds
+ */
+ int read_us();
+
+#ifdef MBED_OPERATORS
+ operator float();
+#endif
+
+protected:
+ int slicetime();
+ int _running; // whether the timer is running
+ unsigned int _start; // the start time of the latest slice
+ int _time; // any accumulated time from previous slices
+ const ticker_data_t *_ticker_data;
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TimerEvent.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMEREVENT_H
+#define MBED_TIMEREVENT_H
+
+#include "ticker_api.h"
+
+namespace mbed {
+
+/** Base abstraction for timer interrupts
+*/
+class TimerEvent {
+public:
+ TimerEvent();
+ TimerEvent(const ticker_data_t *data);
+
+ /** The handler registered with the underlying timer interrupt
+ */
+ static void irq(uint32_t id);
+
+ /** Destruction removes it...
+ */
+ virtual ~TimerEvent();
+
+protected:
+ // The handler called to service the timer event of the derived class
+ virtual void handler() = 0;
+
+ // insert in to linked list
+ void insert(timestamp_t timestamp);
+
+ // remove from linked list, if in it
+ void remove();
+
+ ticker_event_t event;
+
+ const ticker_data_t *_ticker_data;
+};
+
+} // namespace mbed
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Transaction.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,73 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TRANSACTION_H
+#define MBED_TRANSACTION_H
+
+#include "platform.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** Transaction structure
+ */
+typedef struct {
+ void *tx_buffer; /**< Tx buffer */
+ size_t tx_length; /**< Length of Tx buffer*/
+ void *rx_buffer; /**< Rx buffer */
+ size_t rx_length; /**< Length of Rx buffer */
+ uint32_t event; /**< Event for a transaction */
+ event_callback_t callback; /**< User's callback */
+ uint8_t width; /**< Buffer's word width (8, 16, 32, 64) */
+} transaction_t;
+
+/** Transaction class defines a transaction.
+ */
+template<typename Class>
+class Transaction {
+public:
+ Transaction(Class *tpointer, const transaction_t& transaction) : _obj(tpointer), _data(transaction) {
+ }
+
+ Transaction() : _obj(), _data() {
+ }
+
+ ~Transaction() {
+ }
+
+ /** Get object's instance for the transaction
+ *
+ * @return The object which was stored
+ */
+ Class* get_object() {
+ return _obj;
+ }
+
+ /** Get the transaction
+ *
+ * @return The transaction which was stored
+ */
+ transaction_t* get_transaction() {
+ return &_data;
+ }
+
+private:
+ Class* _obj;
+ transaction_t _data;
+};
+
+}
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/analogin_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,39 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGIN_API_H
+#define MBED_ANALOGIN_API_H
+
+#include "device.h"
+
+#if DEVICE_ANALOGIN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct analogin_s analogin_t;
+
+void analogin_init (analogin_t *obj, PinName pin);
+float analogin_read (analogin_t *obj);
+uint16_t analogin_read_u16(analogin_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/analogout_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGOUT_API_H
+#define MBED_ANALOGOUT_API_H
+
+#include "device.h"
+
+#if DEVICE_ANALOGOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct dac_s dac_t;
+
+void analogout_init (dac_t *obj, PinName pin);
+void analogout_free (dac_t *obj);
+void analogout_write (dac_t *obj, float value);
+void analogout_write_u16(dac_t *obj, uint16_t value);
+float analogout_read (dac_t *obj);
+uint16_t analogout_read_u16 (dac_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/buffer.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,30 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUFFER_H
+#define MBED_BUFFER_H
+
+#include <stddef.h>
+
+/** Generic buffer structure
+ */
+typedef struct buffer_s {
+ void *buffer; /**< the pointer to a buffer */
+ size_t length; /**< the buffer length */
+ size_t pos; /**< actual buffer position */
+ uint8_t width; /**< The buffer unit width (8, 16, 32, 64), used for proper *buffer casting */
+} buffer_t;
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/can_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,80 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_API_H
+#define MBED_CAN_API_H
+
+#include "device.h"
+
+#if DEVICE_CAN
+
+#include "PinNames.h"
+#include "PeripheralNames.h"
+#include "can_helper.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ IRQ_RX,
+ IRQ_TX,
+ IRQ_ERROR,
+ IRQ_OVERRUN,
+ IRQ_WAKEUP,
+ IRQ_PASSIVE,
+ IRQ_ARB,
+ IRQ_BUS,
+ IRQ_READY
+} CanIrqType;
+
+
+typedef enum {
+ MODE_RESET,
+ MODE_NORMAL,
+ MODE_SILENT,
+ MODE_TEST_LOCAL,
+ MODE_TEST_GLOBAL,
+ MODE_TEST_SILENT
+} CanMode;
+
+typedef void (*can_irq_handler)(uint32_t id, CanIrqType type);
+
+typedef struct can_s can_t;
+
+void can_init (can_t *obj, PinName rd, PinName td);
+void can_free (can_t *obj);
+int can_frequency(can_t *obj, int hz);
+
+void can_irq_init (can_t *obj, can_irq_handler handler, uint32_t id);
+void can_irq_free (can_t *obj);
+void can_irq_set (can_t *obj, CanIrqType irq, uint32_t enable);
+
+int can_write (can_t *obj, CAN_Message, int cc);
+int can_read (can_t *obj, CAN_Message *msg, int handle);
+int can_mode (can_t *obj, CanMode mode);
+int can_filter(can_t *obj, uint32_t id, uint32_t mask, CANFormat format, int32_t handle);
+void can_reset (can_t *obj);
+unsigned char can_rderror (can_t *obj);
+unsigned char can_tderror (can_t *obj);
+void can_monitor (can_t *obj, int silent);
+
+#ifdef __cplusplus
+};
+#endif
+
+#endif // MBED_CAN_API_H
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/can_helper.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,53 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_HELPER_H
+#define MBED_CAN_HELPER_H
+
+#if DEVICE_CAN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+enum CANFormat {
+ CANStandard = 0,
+ CANExtended = 1,
+ CANAny = 2
+};
+typedef enum CANFormat CANFormat;
+
+enum CANType {
+ CANData = 0,
+ CANRemote = 1
+};
+typedef enum CANType CANType;
+
+struct CAN_Message {
+ unsigned int id; // 29 bit identifier
+ unsigned char data[8]; // Data field
+ unsigned char len; // Length of data field in bytes
+ CANFormat format; // 0 - STANDARD, 1- EXTENDED IDENTIFIER
+ CANType type; // 0 - DATA FRAME, 1 - REMOTE FRAME
+};
+typedef struct CAN_Message CAN_Message;
+
+#ifdef __cplusplus
+};
+#endif
+
+#endif
+
+#endif // MBED_CAN_HELPER_H
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/dma_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,45 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DMA_API_H
+#define MBED_DMA_API_H
+
+#include <stdint.h>
+
+#define DMA_ERROR_OUT_OF_CHANNELS (-1)
+
+typedef enum {
+ DMA_USAGE_NEVER,
+ DMA_USAGE_OPPORTUNISTIC,
+ DMA_USAGE_ALWAYS,
+ DMA_USAGE_TEMPORARY_ALLOCATED,
+ DMA_USAGE_ALLOCATED
+} DMAUsage;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void dma_init(void);
+
+int dma_channel_allocate(uint32_t capabilities);
+
+int dma_channel_free(int channelid);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/ethernet_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,63 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ETHERNET_API_H
+#define MBED_ETHERNET_API_H
+
+#include "device.h"
+
+#if DEVICE_ETHERNET
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Connection constants
+
+int ethernet_init(void);
+void ethernet_free(void);
+
+// write size bytes from data to ethernet buffer
+// return num bytes written
+// or -1 if size is too big
+int ethernet_write(const char *data, int size);
+
+// send ethernet write buffer, returning the packet size sent
+int ethernet_send(void);
+
+// recieve from ethernet buffer, returning packet size, or 0 if no packet
+int ethernet_receive(void);
+
+// read size bytes in to data, return actual num bytes read (0..size)
+// if data == NULL, throw the bytes away
+int ethernet_read(char *data, int size);
+
+// get the ethernet address
+void ethernet_address(char *mac);
+
+// see if the link is up
+int ethernet_link(void);
+
+// force link settings
+void ethernet_set_link(int speed, int duplex);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/gpio_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,57 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_API_H
+#define MBED_GPIO_API_H
+
+#include "device.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Set the given pin as GPIO
+ * @param pin The pin to be set as GPIO
+ * @return The GPIO port mask for this pin
+ **/
+uint32_t gpio_set(PinName pin);
+
+/* Checks if gpio object is connected (pin was not initialized with NC)
+ * @param pin The pin to be set as GPIO
+ * @return 0 if port is initialized with NC
+ **/
+int gpio_is_connected(const gpio_t *obj);
+
+/* GPIO object */
+void gpio_init(gpio_t *obj, PinName pin);
+
+void gpio_mode (gpio_t *obj, PinMode mode);
+void gpio_dir (gpio_t *obj, PinDirection direction);
+
+void gpio_write(gpio_t *obj, int value);
+int gpio_read (gpio_t *obj);
+
+// the following set of functions are generic and are implemented in the common gpio.c file
+void gpio_init_in(gpio_t* gpio, PinName pin);
+void gpio_init_in_ex(gpio_t* gpio, PinName pin, PinMode mode);
+void gpio_init_out(gpio_t* gpio, PinName pin);
+void gpio_init_out_ex(gpio_t* gpio, PinName pin, int value);
+void gpio_init_inout(gpio_t* gpio, PinName pin, PinDirection direction, PinMode mode, int value);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/gpio_irq_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_IRQ_API_H
+#define MBED_GPIO_IRQ_API_H
+
+#include "device.h"
+
+#if DEVICE_INTERRUPTIN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ IRQ_NONE,
+ IRQ_RISE,
+ IRQ_FALL
+} gpio_irq_event;
+
+typedef struct gpio_irq_s gpio_irq_t;
+
+typedef void (*gpio_irq_handler)(uint32_t id, gpio_irq_event event);
+
+int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id);
+void gpio_irq_free(gpio_irq_t *obj);
+void gpio_irq_set (gpio_irq_t *obj, gpio_irq_event event, uint32_t enable);
+void gpio_irq_enable(gpio_irq_t *obj);
+void gpio_irq_disable(gpio_irq_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/i2c_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,223 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_API_H
+#define MBED_I2C_API_H
+
+#include "device.h"
+#include "buffer.h"
+
+#if DEVICE_I2C
+
+/**
+ * @defgroup I2CEvents I2C Events Macros
+ *
+ * @{
+ */
+#define I2C_EVENT_ERROR (1 << 1)
+#define I2C_EVENT_ERROR_NO_SLAVE (1 << 2)
+#define I2C_EVENT_TRANSFER_COMPLETE (1 << 3)
+#define I2C_EVENT_TRANSFER_EARLY_NACK (1 << 4)
+#define I2C_EVENT_ALL (I2C_EVENT_ERROR | I2C_EVENT_TRANSFER_COMPLETE | I2C_EVENT_ERROR_NO_SLAVE | I2C_EVENT_TRANSFER_EARLY_NACK)
+
+/**@}*/
+
+#if DEVICE_I2C_ASYNCH
+/** Asynch i2c hal structure
+ */
+typedef struct {
+ struct i2c_s i2c; /**< Target specific i2c structure */
+ struct buffer_s tx_buff; /**< Tx buffer */
+ struct buffer_s rx_buff; /**< Rx buffer */
+} i2c_t;
+
+#else
+/** Non-asynch i2c hal structure
+ */
+typedef struct i2c_s i2c_t;
+
+#endif
+
+enum {
+ I2C_ERROR_NO_SLAVE = -1,
+ I2C_ERROR_BUS_BUSY = -2
+};
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup GeneralI2C I2C Configuration Functions
+ * @{
+ */
+
+/** Initialize the I2C peripheral. It sets the default parameters for I2C
+ * peripheral, and configure its specifieds pins.
+ * @param obj The i2c object
+ * @param sda The sda pin
+ * @param scl The scl pin
+ */
+void i2c_init(i2c_t *obj, PinName sda, PinName scl);
+
+/** Configure the I2C frequency.
+ * @param obj The i2c object
+ * @param hz Frequency in Hz
+ */
+void i2c_frequency(i2c_t *obj, int hz);
+
+/** Send START command.
+ * @param obj The i2c object
+ */
+int i2c_start(i2c_t *obj);
+
+/** Send STOP command.
+ * @param obj The i2c object
+ */
+int i2c_stop(i2c_t *obj);
+
+/** Blocking reading data.
+ * @param obj The i2c object
+ * @param address 7-bit address (last bit is 1)
+ * @param data The buffer for receiving
+ * @param length Number of bytes to read
+ * @param stop Stop to be generated after the transfer is done
+ * @return Number of read bytes
+ */
+int i2c_read(i2c_t *obj, int address, char *data, int length, int stop);
+
+/** Blocking sending data.
+ * @param obj The i2c object
+ * @param address 7-bit address (last bit is 0)
+ * @param data The buffer for sending
+ * @param length Number of bytes to wrte
+ * @param stop Stop to be generated after the transfer is done
+ * @return Number of written bytes
+ */
+int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop);
+
+/** Reset I2C peripheral. TODO: The action here. Most of the implementation sends stop().
+ * @param obj The i2c object
+ */
+void i2c_reset(i2c_t *obj);
+
+/** Read one byte.
+ * @param obj The i2c object
+ * @param last Acknoledge
+ * @return The read byte
+ */
+int i2c_byte_read(i2c_t *obj, int last);
+
+/** Write one byte.
+ * @param obj The i2c object
+ * @param data Byte to be written
+ * @return 1 if NAK was received, 0 if ACK was received, 2 for timeout.
+ */
+int i2c_byte_write(i2c_t *obj, int data);
+
+/**@}*/
+
+#if DEVICE_I2CSLAVE
+
+/**
+ * \defgroup SynchI2C Synchronous I2C Hardware Abstraction Layer for slave
+ * @{
+ */
+
+/** Configure I2C as slave or master.
+ * @param obj The I2C object
+ * @return non-zero if a value is available
+ */
+void i2c_slave_mode(i2c_t *obj, int enable_slave);
+
+/** Check to see if the I2C slave has been addressed.
+ * @param obj The I2C object
+ * @return The status - 1 - read addresses, 2 - write to all slaves,
+ * 3 write addressed, 0 - the slave has not been addressed
+ */
+int i2c_slave_receive(i2c_t *obj);
+
+/** Configure I2C as slave or master.
+ * @param obj The I2C object
+ * @return non-zero if a value is available
+ */
+int i2c_slave_read(i2c_t *obj, char *data, int length);
+
+/** Configure I2C as slave or master.
+ * @param obj The I2C object
+ * @return non-zero if a value is available
+ */
+int i2c_slave_write(i2c_t *obj, const char *data, int length);
+
+/** Configure I2C address.
+ * @param obj The I2C object
+ * @param idx Currently not used
+ * @param address The address to be set
+ * @param mask Currently not used
+ */
+void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask);
+
+#endif
+
+/**@}*/
+
+#if DEVICE_I2C_ASYNCH
+
+/**
+ * \defgroup AsynchI2C Asynchronous I2C Hardware Abstraction Layer
+ * @{
+ */
+
+/** Start i2c asynchronous transfer.
+ * @param obj The I2C object
+ * @param tx The buffer to send
+ * @param tx_length The number of words to transmit
+ * @param rx The buffer to receive
+ * @param rx_length The number of words to receive
+ * @param address The address to be set - 7bit or 9 bit
+ * @param stop If true, stop will be generated after the transfer is done
+ * @param handler The I2C IRQ handler to be set
+ * @param hint DMA hint usage
+ */
+void i2c_transfer_asynch(i2c_t *obj, void *tx, size_t tx_length, void *rx, size_t rx_length, uint32_t address, uint32_t stop, uint32_t handler, uint32_t event, DMAUsage hint);
+
+/** The asynchronous IRQ handler
+ * @param obj The I2C object which holds the transfer information
+ * @return event flags if a transfer termination condition was met or 0 otherwise.
+ */
+uint32_t i2c_irq_handler_asynch(i2c_t *obj);
+
+/** Attempts to determine if I2C peripheral is already in use.
+ * @param obj The I2C object
+ * @return non-zero if the I2C module is active or zero if it is not
+ */
+uint8_t i2c_active(i2c_t *obj);
+
+/** Abort ongoing asynchronous transaction.
+ * @param obj The I2C object
+ */
+void i2c_abort_asynch(i2c_t *obj);
+
+#endif
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/lp_ticker_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LPTICKER_API_H
+#define MBED_LPTICKER_API_H
+
+#include "device.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "ticker_api.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup LpTicker Low Power Ticker Functions
+ * @{
+ */
+
+/** Get low power ticker's data
+ *
+ * @return The low power ticker data
+ */
+const ticker_data_t* get_lp_ticker_data(void);
+
+/** The wrapper for ticker_irq_handler, to pass lp ticker's data
+ *
+ */
+void lp_ticker_irq_handler(void);
+
+/* HAL lp ticker */
+
+/** Initialize the low power ticker
+ *
+ */
+void lp_ticker_init(void);
+
+/** Read the current counter
+ *
+ * @return The current timer's counter value in microseconds
+ */
+uint32_t lp_ticker_read(void);
+
+/** Set interrupt for specified timestamp
+ *
+ * @param timestamp The time in microseconds to be set
+ */
+void lp_ticker_set_interrupt(timestamp_t timestamp);
+
+/** Disable low power ticker interrupt
+ *
+ */
+void lp_ticker_disable_interrupt(void);
+
+/** Clear the low power ticker interrupt
+ *
+ */
+void lp_ticker_clear_interrupt(void);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.h Fri Dec 03 23:00:34 2021 +0000 @@ -0,0 +1,69 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_H +#define MBED_H + +#define MBED_LIBRARY_VERSION 101 + +#include "platform.h" + +// Useful C libraries +#include <math.h> +#include <time.h> + +// mbed Debug libraries +#include "mbed_error.h" +#include "mbed_interface.h" + +// mbed Peripheral components +#include "DigitalIn.h" +#include "DigitalOut.h" +#include "DigitalInOut.h" +#include "BusIn.h" +#include "BusOut.h" +#include "BusInOut.h" +#include "PortIn.h" +#include "PortInOut.h" +#include "PortOut.h" +#include "AnalogIn.h" +#include "AnalogOut.h" +#include "PwmOut.h" +#include "Serial.h" +#include "SPI.h" +#include "SPISlave.h" +#include "I2C.h" +#include "I2CSlave.h" +#include "Ethernet.h" +#include "CAN.h" +#include "RawSerial.h" + +// mbed Internal components +#include "Timer.h" +#include "Ticker.h" +#include "Timeout.h" +#include "LowPowerTimeout.h" +#include "LowPowerTicker.h" +#include "LowPowerTimer.h" +#include "LocalFileSystem.h" +#include "InterruptIn.h" +#include "wait_api.h" +#include "sleep_api.h" +#include "rtc_time.h" + +using namespace mbed; +using namespace std; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_assert.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,50 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ASSERT_H
+#define MBED_ASSERT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Internal mbed assert function which is invoked when MBED_ASSERT macro failes.
+ * This function is active only if NDEBUG is not defined prior to including this
+ * assert header file.
+ * In case of MBED_ASSERT failing condition, the assertation message is printed
+ * to stderr and mbed_die() is called.
+ * @param expr Expresion to be checked.
+ * @param file File where assertation failed.
+ * @param line Failing assertation line number.
+ */
+void mbed_assert_internal(const char *expr, const char *file, int line);
+
+#ifdef __cplusplus
+}
+#endif
+
+#ifdef NDEBUG
+#define MBED_ASSERT(expr) ((void)0)
+
+#else
+#define MBED_ASSERT(expr) \
+do { \
+ if (!(expr)) { \
+ mbed_assert_internal(#expr, __FILE__, __LINE__); \
+ } \
+} while (0)
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_debug.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DEBUG_H
+#define MBED_DEBUG_H
+#include "device.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_STDIO_MESSAGES
+#include <stdio.h>
+#include <stdarg.h>
+
+/** Output a debug message
+ *
+ * @param format printf-style format string, followed by variables
+ */
+static inline void debug(const char *format, ...) {
+ va_list args;
+ va_start(args, format);
+ vfprintf(stderr, format, args);
+ va_end(args);
+}
+
+/** Conditionally output a debug message
+ *
+ * NOTE: If the condition is constant false (!= 1) and the compiler optimization
+ * level is greater than 0, then the whole function will be compiled away.
+ *
+ * @param condition output only if condition is true (== 1)
+ * @param format printf-style format string, followed by variables
+ */
+static inline void debug_if(int condition, const char *format, ...) {
+ if (condition == 1) {
+ va_list args;
+ va_start(args, format);
+ vfprintf(stderr, format, args);
+ va_end(args);
+ }
+}
+
+#else
+static inline void debug(const char *format, ...) {}
+static inline void debug_if(int condition, const char *format, ...) {}
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_error.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ERROR_H
+#define MBED_ERROR_H
+
+/** To generate a fatal compile-time error, you can use the pre-processor #error directive.
+ *
+ * @code
+ * #error "That shouldn't have happened!"
+ * @endcode
+ *
+ * If the compiler evaluates this line, it will report the error and stop the compile.
+ *
+ * For example, you could use this to check some user-defined compile-time variables:
+ *
+ * @code
+ * #define NUM_PORTS 7
+ * #if (NUM_PORTS > 4)
+ * #error "NUM_PORTS must be less than 4"
+ * #endif
+ * @endcode
+ *
+ * Reporting Run-Time Errors:
+ * To generate a fatal run-time error, you can use the mbed error() function.
+ *
+ * @code
+ * error("That shouldn't have happened!");
+ * @endcode
+ *
+ * If the mbed running the program executes this function, it will print the
+ * message via the USB serial port, and then die with the blue lights of death!
+ *
+ * The message can use printf-style formatting, so you can report variables in the
+ * message too. For example, you could use this to check a run-time condition:
+ *
+ * @code
+ * if(x >= 5) {
+ * error("expected x to be less than 5, but got %d", x);
+ * }
+ * #endcode
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void error(const char* format, ...);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_interface.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,114 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_INTERFACE_H
+#define MBED_INTERFACE_H
+
+#include "device.h"
+
+/* Mbed interface mac address
+ * if MBED_MAC_ADD_x are zero, interface uid sets mac address,
+ * otherwise MAC_ADD_x are used.
+ */
+#define MBED_MAC_ADDR_INTERFACE 0x00
+#define MBED_MAC_ADDR_0 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_1 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_2 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_3 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_4 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_5 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDRESS_SUM (MBED_MAC_ADDR_0 | MBED_MAC_ADDR_1 | MBED_MAC_ADDR_2 | MBED_MAC_ADDR_3 | MBED_MAC_ADDR_4 | MBED_MAC_ADDR_5)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_SEMIHOST
+
+/** Functions to control the mbed interface
+ *
+ * mbed Microcontrollers have a built-in interface to provide functionality such as
+ * drag-n-drop download, reset, serial-over-usb, and access to the mbed local file
+ * system. These functions provide means to control the interface suing semihost
+ * calls it supports.
+ */
+
+/** Determine whether the mbed interface is connected, based on whether debug is enabled
+ *
+ * @returns
+ * 1 if interface is connected,
+ * 0 otherwise
+ */
+int mbed_interface_connected(void);
+
+/** Instruct the mbed interface to reset, as if the reset button had been pressed
+ *
+ * @returns
+ * 1 if successful,
+ * 0 otherwise (e.g. interface not present)
+ */
+int mbed_interface_reset(void);
+
+/** This will disconnect the debug aspect of the interface, so semihosting will be disabled.
+ * The interface will still support the USB serial aspect
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_disconnect(void);
+
+/** This will disconnect the debug aspect of the interface, and if the USB cable is not
+ * connected, also power down the interface. If the USB cable is connected, the interface
+ * will remain powered up and visible to the host
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_powerdown(void);
+
+/** This returns a string containing the 32-character UID of the mbed interface
+ * This is a weak function that can be overwritten if required
+ *
+ * @param uid A 33-byte array to write the null terminated 32-byte string
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_uid(char *uid);
+
+#endif
+
+/** This returns a unique 6-byte MAC address, based on the interface UID
+ * If the interface is not present, it returns a default fixed MAC address (00:02:F7:F0:00:00)
+ *
+ * This is a weak function that can be overwritten if you want to provide your own mechanism to
+ * provide a MAC address.
+ *
+ * @param mac A 6-byte array to write the MAC address
+ */
+void mbed_mac_address(char *mac);
+
+/** Cause the mbed to flash the BLOD (Blue LEDs Of Death) sequence
+ */
+void mbed_die(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/pinmap.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,45 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINMAP_H
+#define MBED_PINMAP_H
+
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ int peripheral;
+ int function;
+} PinMap;
+
+void pin_function(PinName pin, int function);
+void pin_mode (PinName pin, PinMode mode);
+
+uint32_t pinmap_peripheral(PinName pin, const PinMap* map);
+uint32_t pinmap_function(PinName pin, const PinMap* map);
+uint32_t pinmap_merge (uint32_t a, uint32_t b);
+void pinmap_pinout (PinName pin, const PinMap *map);
+uint32_t pinmap_find_peripheral(PinName pin, const PinMap* map);
+uint32_t pinmap_find_function(PinName pin, const PinMap* map);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/platform.h Fri Dec 03 23:00:34 2021 +0000 @@ -0,0 +1,30 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PLATFORM_H +#define MBED_PLATFORM_H + +#define MBED_OPERATORS 1 + +#include "device.h" +#include "PinNames.h" +#include "PeripheralNames.h" + +#include <cstddef> +#include <cstdlib> +#include <cstdio> +#include <cstring> + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/port_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTMAP_H
+#define MBED_PORTMAP_H
+
+#include "device.h"
+
+#if DEVICE_PORTIN || DEVICE_PORTOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct port_s port_t;
+
+PinName port_pin(PortName port, int pin_n);
+
+void port_init (port_t *obj, PortName port, int mask, PinDirection dir);
+void port_mode (port_t *obj, PinMode mode);
+void port_dir (port_t *obj, PinDirection dir);
+void port_write(port_t *obj, int value);
+int port_read (port_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/pwmout_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PWMOUT_API_H
+#define MBED_PWMOUT_API_H
+
+#include "device.h"
+
+#if DEVICE_PWMOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct pwmout_s pwmout_t;
+
+void pwmout_init (pwmout_t* obj, PinName pin);
+void pwmout_free (pwmout_t* obj);
+
+void pwmout_write (pwmout_t* obj, float percent);
+float pwmout_read (pwmout_t* obj);
+
+void pwmout_period (pwmout_t* obj, float seconds);
+void pwmout_period_ms (pwmout_t* obj, int ms);
+void pwmout_period_us (pwmout_t* obj, int us);
+
+void pwmout_pulsewidth (pwmout_t* obj, float seconds);
+void pwmout_pulsewidth_ms(pwmout_t* obj, int ms);
+void pwmout_pulsewidth_us(pwmout_t* obj, int us);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/rtc_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_RTC_API_H
+#define MBED_RTC_API_H
+
+#include "device.h"
+
+#if DEVICE_RTC
+
+#include <time.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void rtc_init(void);
+void rtc_free(void);
+int rtc_isenabled(void);
+
+time_t rtc_read(void);
+void rtc_write(time_t t);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/rtc_time.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,85 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <time.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Implementation of the C time.h functions
+ *
+ * Provides mechanisms to set and read the current time, based
+ * on the microcontroller Real-Time Clock (RTC), plus some
+ * standard C manipulation and formating functions.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * int main() {
+ * set_time(1256729737); // Set RTC time to Wed, 28 Oct 2009 11:35:37
+ *
+ * while(1) {
+ * time_t seconds = time(NULL);
+ *
+ * printf("Time as seconds since January 1, 1970 = %d\n", seconds);
+ *
+ * printf("Time as a basic string = %s", ctime(&seconds));
+ *
+ * char buffer[32];
+ * strftime(buffer, 32, "%I:%M %p\n", localtime(&seconds));
+ * printf("Time as a custom formatted string = %s", buffer);
+ *
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+
+/** Set the current time
+ *
+ * Initialises and sets the time of the microcontroller Real-Time Clock (RTC)
+ * to the time represented by the number of seconds since January 1, 1970
+ * (the UNIX timestamp).
+ *
+ * @param t Number of seconds since January 1, 1970 (the UNIX timestamp)
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * int main() {
+ * set_time(1256729737); // Set time to Wed, 28 Oct 2009 11:35:37
+ * }
+ * @endcode
+ */
+void set_time(time_t t);
+
+/** Attach an external RTC to be used for the C time functions
+ *
+ * Do not call this function from an interrupt while an RTC read/write operation may be occurring
+ *
+ * @param read_rtc pointer to function which returns current UNIX timestamp
+ * @param write_rtc pointer to function which sets current UNIX timestamp, can be NULL
+ * @param init_rtc pointer to funtion which initializes RTC, can be NULL
+ * @param isenabled_rtc pointer to function wich returns if the rtc is enabled, can be NULL
+ */
+void attach_rtc(time_t (*read_rtc)(void), void (*write_rtc)(time_t), void (*init_rtc)(void), int (*isenabled_rtc)(void));
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/semihost_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SEMIHOST_H
+#define MBED_SEMIHOST_H
+
+#include "device.h"
+#include "toolchain.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_SEMIHOST
+
+#ifndef __CC_ARM
+
+#if defined(__ICCARM__)
+inline int __semihost(int reason, const void *arg) {
+ return __semihosting(reason, (void*)arg);
+}
+#else
+
+#ifdef __thumb__
+# define AngelSWI 0xAB
+# define AngelSWIInsn "bkpt"
+# define AngelSWIAsm bkpt
+#else
+# define AngelSWI 0x123456
+# define AngelSWIInsn "swi"
+# define AngelSWIAsm swi
+#endif
+
+static inline int __semihost(int reason, const void *arg) {
+ int value;
+
+ asm volatile (
+ "mov r0, %1" "\n\t"
+ "mov r1, %2" "\n\t"
+ AngelSWIInsn " %a3" "\n\t"
+ "mov %0, r0"
+ : "=r" (value) /* output operands */
+ : "r" (reason), "r" (arg), "i" (AngelSWI) /* input operands */
+ : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" /* list of clobbered registers */
+ );
+
+ return value;
+}
+#endif
+#endif
+
+#if DEVICE_LOCALFILESYSTEM
+FILEHANDLE semihost_open(const char* name, int openmode);
+int semihost_close (FILEHANDLE fh);
+int semihost_read (FILEHANDLE fh, unsigned char* buffer, unsigned int length, int mode);
+int semihost_write (FILEHANDLE fh, const unsigned char* buffer, unsigned int length, int mode);
+int semihost_ensure(FILEHANDLE fh);
+long semihost_flen (FILEHANDLE fh);
+int semihost_seek (FILEHANDLE fh, long position);
+int semihost_istty (FILEHANDLE fh);
+
+int semihost_remove(const char *name);
+int semihost_rename(const char *old_name, const char *new_name);
+#endif
+
+int semihost_uid(char *uid);
+int semihost_reset(void);
+int semihost_vbus(void);
+int semihost_powerdown(void);
+int semihost_exit(void);
+
+int semihost_connected(void);
+int semihost_disabledebug(void);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/serial_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,302 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIAL_API_H
+#define MBED_SERIAL_API_H
+
+#include "device.h"
+#include "buffer.h"
+#include "dma_api.h"
+
+#if DEVICE_SERIAL
+
+#define SERIAL_EVENT_TX_SHIFT (2)
+#define SERIAL_EVENT_RX_SHIFT (8)
+
+#define SERIAL_EVENT_TX_MASK (0x00FC)
+#define SERIAL_EVENT_RX_MASK (0x3F00)
+
+#define SERIAL_EVENT_ERROR (1 << 1)
+
+/**
+ * @defgroup SerialTXEvents Serial TX Events Macros
+ *
+ * @{
+ */
+#define SERIAL_EVENT_TX_COMPLETE (1 << (SERIAL_EVENT_TX_SHIFT + 0))
+#define SERIAL_EVENT_TX_ALL (SERIAL_EVENT_TX_COMPLETE)
+/**@}*/
+
+/**
+ * @defgroup SerialRXEvents Serial RX Events Macros
+ *
+ * @{
+ */
+#define SERIAL_EVENT_RX_COMPLETE (1 << (SERIAL_EVENT_RX_SHIFT + 0))
+#define SERIAL_EVENT_RX_OVERRUN_ERROR (1 << (SERIAL_EVENT_RX_SHIFT + 1))
+#define SERIAL_EVENT_RX_FRAMING_ERROR (1 << (SERIAL_EVENT_RX_SHIFT + 2))
+#define SERIAL_EVENT_RX_PARITY_ERROR (1 << (SERIAL_EVENT_RX_SHIFT + 3))
+#define SERIAL_EVENT_RX_OVERFLOW (1 << (SERIAL_EVENT_RX_SHIFT + 4))
+#define SERIAL_EVENT_RX_CHARACTER_MATCH (1 << (SERIAL_EVENT_RX_SHIFT + 5))
+#define SERIAL_EVENT_RX_ALL (SERIAL_EVENT_RX_OVERFLOW | SERIAL_EVENT_RX_PARITY_ERROR | \
+ SERIAL_EVENT_RX_FRAMING_ERROR | SERIAL_EVENT_RX_OVERRUN_ERROR | \
+ SERIAL_EVENT_RX_COMPLETE | SERIAL_EVENT_RX_CHARACTER_MATCH)
+/**@}*/
+
+#define SERIAL_RESERVED_CHAR_MATCH (255)
+
+typedef enum {
+ ParityNone = 0,
+ ParityOdd = 1,
+ ParityEven = 2,
+ ParityForced1 = 3,
+ ParityForced0 = 4
+} SerialParity;
+
+typedef enum {
+ RxIrq,
+ TxIrq
+} SerialIrq;
+
+typedef enum {
+ FlowControlNone,
+ FlowControlRTS,
+ FlowControlCTS,
+ FlowControlRTSCTS
+} FlowControl;
+
+typedef void (*uart_irq_handler)(uint32_t id, SerialIrq event);
+
+#if DEVICE_SERIAL_ASYNCH
+/** Asynch serial hal structure
+ */
+typedef struct {
+ struct serial_s serial; /**< Target specific serial structure */
+ struct buffer_s tx_buff; /**< Tx buffer */
+ struct buffer_s rx_buff; /**< Rx buffer */
+ uint8_t char_match; /**< Character to be matched */
+ uint8_t char_found; /**< State of the matched character */
+} serial_t;
+
+#else
+/** Non-asynch serial hal structure
+ */
+typedef struct serial_s serial_t;
+
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup GeneralSerial Serial Configuration Functions
+ * @{
+ */
+
+/** Initialize the serial peripheral. It sets the default parameters for serial
+ * peripheral, and configure its specifieds pins.
+ *
+ * @param obj The serial object
+ * @param tx The TX pin
+ * @param rx The RX pin
+ */
+void serial_init(serial_t *obj, PinName tx, PinName rx);
+
+/** Release the serial peripheral, not currently invoked. It requires further
+ * resource management.
+ *
+ * @param obj The serial object
+ */
+void serial_free(serial_t *obj);
+
+/** Configure the baud rate
+ *
+ * @param obj The serial object
+ * @param baudrate The baud rate to be configured
+ */
+void serial_baud(serial_t *obj, int baudrate);
+
+/** Configure the format. Set the number of bits, parity and the number of stop bits
+ *
+ * @param obj The serial object
+ * @param data_bits The number of data bits
+ * @param parity The parity
+ * @param stop_bits The number of stop bits
+ */
+void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits);
+
+/** The serial interrupt handler registration.
+ *
+ * @param obj The serial object
+ * @param handler The interrupt handler which will be invoked when interrupt fires.
+ * @param id The SerialBase object
+ */
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id);
+
+/** Configure serial interrupt. This function is used for word-approach
+ *
+ * @param obj The serial object
+ * @param irq The serial IRQ type (RX or TX)
+ * @param enable Set to non-zero to enable events, or zero to disable them
+ */
+void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable);
+
+/** Get character. This is a blocking call, waiting for a character
+ *
+ * @param obj The serial object
+ */
+int serial_getc(serial_t *obj);
+
+/** Put a character. This is a blocking call, waiting for a peripheral to be available
+ * for writing
+ *
+ * @param obj The serial object
+ * @param c The character to be sent
+ */
+void serial_putc(serial_t *obj, int c);
+
+/** Check if the serial peripheral is readable
+ *
+ * @param obj The serial object
+ * @return Non-zero value if a character can be read, 0 if nothing to read.
+ */
+int serial_readable(serial_t *obj);
+
+/** Check if the serial peripheral is writable
+ *
+ * @param obj The serial object
+ * @return Non-zero value if a character can be written, 0 otherwise.
+ */
+int serial_writable(serial_t *obj);
+
+/** Clear the serial peripheral
+ *
+ * @param obj The serial object
+ */
+void serial_clear(serial_t *obj);
+
+/** Set the break
+ *
+ * @param obj The serial object
+ */
+void serial_break_set(serial_t *obj);
+
+/** Clear the break
+ *
+ * @param obj The serial object
+ */
+void serial_break_clear(serial_t *obj);
+
+/** Configure the TX pin for UART function.
+ *
+ * @param tx The pin used for TX
+ */
+void serial_pinout_tx(PinName tx);
+
+/** Configure the serial for the flow control. It sets flow control in the hardware
+ * if a serial peripheral supports it, otherwise software emulation is used.
+ *
+ * @param obj The serial object
+ * @param type The type of the flow control. Look at the available FlowControl types.
+ * @param rxflow The tx pin
+ * @param txflow The rx pin
+ */
+void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow);
+
+#if DEVICE_SERIAL_ASYNCH
+
+/**@}*/
+
+/**
+ * \defgroup AsynchSerial Asynchronous Serial Hardware Abstraction Layer
+ * @{
+ */
+
+/** Begin asynchronous TX transfer. The used buffer is specified in the serial object,
+ * tx_buff
+ *
+ * @param obj The serial object
+ * @param tx The buffer for sending
+ * @param tx_length The number of words to transmit
+ * @param tx_width The bit width of buffer word
+ * @param handler The serial handler
+ * @param event The logical OR of events to be registered
+ * @param hint A suggestion for how to use DMA with this transfer
+ * @return Returns number of data transfered, or 0 otherwise
+ */
+int serial_tx_asynch(serial_t *obj, void *tx, size_t tx_length, uint8_t tx_width, uint32_t handler, uint32_t event, DMAUsage hint);
+
+/** Begin asynchronous RX transfer (enable interrupt for data collecting)
+ * The used buffer is specified in the serial object - rx_buff
+ *
+ * @param obj The serial object
+ * @param rx The buffer for sending
+ * @param rx_length The number of words to transmit
+ * @param rx_width The bit width of buffer word
+ * @param handler The serial handler
+ * @param event The logical OR of events to be registered
+ * @param handler The serial handler
+ * @param char_match A character in range 0-254 to be matched
+ * @param hint A suggestion for how to use DMA with this transfer
+ */
+void serial_rx_asynch(serial_t *obj, void *rx, size_t rx_length, uint8_t rx_width, uint32_t handler, uint32_t event, uint8_t char_match, DMAUsage hint);
+
+/** Attempts to determine if the serial peripheral is already in use for TX
+ *
+ * @param obj The serial object
+ * @return Non-zero if the RX transaction is ongoing, 0 otherwise
+ */
+uint8_t serial_tx_active(serial_t *obj);
+
+/** Attempts to determine if the serial peripheral is already in use for RX
+ *
+ * @param obj The serial object
+ * @return Non-zero if the RX transaction is ongoing, 0 otherwise
+ */
+uint8_t serial_rx_active(serial_t *obj);
+
+/** The asynchronous TX and RX handler.
+ *
+ * @param obj The serial object
+ * @return Returns event flags if a RX transfer termination condition was met or 0 otherwise
+ */
+int serial_irq_handler_asynch(serial_t *obj);
+
+/** Abort the ongoing TX transaction. It disables the enabled interupt for TX and
+ * flush TX hardware buffer if TX FIFO is used
+ *
+ * @param obj The serial object
+ */
+void serial_tx_abort_asynch(serial_t *obj);
+
+/** Abort the ongoing RX transaction It disables the enabled interrupt for RX and
+ * flush RX hardware buffer if RX FIFO is used
+ *
+ * @param obj The serial object
+ */
+void serial_rx_abort_asynch(serial_t *obj);
+
+/**@}*/
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/sleep_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,64 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SLEEP_API_H
+#define MBED_SLEEP_API_H
+
+#include "device.h"
+
+#if DEVICE_SLEEP
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Send the microcontroller to sleep
+ *
+ * The processor is setup ready for sleep, and sent to sleep using __WFI(). In this mode, the
+ * system clock to the core is stopped until a reset or an interrupt occurs. This eliminates
+ * dynamic power used by the processor, memory systems and buses. The processor, peripheral and
+ * memory state are maintained, and the peripherals continue to work and can generate interrupts.
+ *
+ * The processor can be woken up by any internal peripheral interrupt or external pin interrupt.
+ *
+ * @note
+ * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+void sleep(void);
+
+/** Send the microcontroller to deep sleep
+ *
+ * This processor is setup ready for deep sleep, and sent to sleep using __WFI(). This mode
+ * has the same sleep features as sleep plus it powers down peripherals and clocks. All state
+ * is still maintained.
+ *
+ * The processor can only be woken up by an external interrupt on a pin or a watchdog timer.
+ *
+ * @note
+ * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+void deepsleep(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/spi_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,213 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPI_API_H
+#define MBED_SPI_API_H
+
+#include "device.h"
+#include "dma_api.h"
+#include "buffer.h"
+
+#if DEVICE_SPI
+
+#define SPI_EVENT_ERROR (1 << 1)
+#define SPI_EVENT_COMPLETE (1 << 2)
+#define SPI_EVENT_RX_OVERFLOW (1 << 3)
+#define SPI_EVENT_ALL (SPI_EVENT_ERROR | SPI_EVENT_COMPLETE | SPI_EVENT_RX_OVERFLOW)
+
+#define SPI_EVENT_INTERNAL_TRANSFER_COMPLETE (1 << 30) // internal flag to report an event occurred
+
+#define SPI_FILL_WORD (0xFFFF)
+
+#if DEVICE_SPI_ASYNCH
+/** Asynch spi hal structure
+ */
+typedef struct {
+ struct spi_s spi; /**< Target specific spi structure */
+ struct buffer_s tx_buff; /**< Tx buffer */
+ struct buffer_s rx_buff; /**< Rx buffer */
+} spi_t;
+
+#else
+/** Non-asynch spi hal structure
+ */
+typedef struct spi_s spi_t;
+
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup GeneralSPI SPI Configuration Functions
+ * @{
+ */
+
+/** Initialize the SPI peripheral
+ *
+ * Configures the pins used by SPI, sets a default format and frequency, and enables the peripheral
+ * @param[out] obj The SPI object to initialize
+ * @param[in] mosi The pin to use for MOSI
+ * @param[in] miso The pin to use for MISO
+ * @param[in] sclk The pin to use for SCLK
+ * @param[in] ssel The pin to use for SSEL
+ */
+void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel);
+
+/** Release a SPI object
+ *
+ * TODO: spi_free is currently unimplemented
+ * This will require reference counting at the C++ level to be safe
+ *
+ * Return the pins owned by the SPI object to their reset state
+ * Disable the SPI peripheral
+ * Disable the SPI clock
+ * @param[in] obj The SPI object to deinitialize
+ */
+void spi_free(spi_t *obj);
+
+/** Configure the SPI format
+ *
+ * Set the number of bits per frame, configure clock polarity and phase, shift order and master/slave mode
+ * @param[in,out] obj The SPI object to configure
+ * @param[in] bits The number of bits per frame
+ * @param[in] mode The SPI mode (clock polarity, phase, and shift direction)
+ * @param[in] slave Zero for master mode or non-zero for slave mode
+ */
+void spi_format(spi_t *obj, int bits, int mode, int slave);
+
+/** Set the SPI baud rate
+ *
+ * Actual frequency may differ from the desired frequency due to available dividers and bus clock
+ * Configures the SPI peripheral's baud rate
+ * @param[in,out] obj The SPI object to configure
+ * @param[in] hz The baud rate in Hz
+ */
+void spi_frequency(spi_t *obj, int hz);
+
+/**@}*/
+/**
+ * \defgroup SynchSPI Synchronous SPI Hardware Abstraction Layer
+ * @{
+ */
+
+/** Write a byte out in master mode and receive a value
+ *
+ * @param[in] obj The SPI peripheral to use for sending
+ * @param[in] value The value to send
+ * @return Returns the value received during send
+ */
+int spi_master_write(spi_t *obj, int value);
+
+/** Check if a value is available to read
+ *
+ * @param[in] obj The SPI peripheral to check
+ * @return non-zero if a value is available
+ */
+int spi_slave_receive(spi_t *obj);
+
+/** Get a received value out of the SPI receive buffer in slave mode
+ *
+ * Blocks until a value is available
+ * @param[in] obj The SPI peripheral to read
+ * @return The value received
+ */
+int spi_slave_read(spi_t *obj);
+
+/** Write a value to the SPI peripheral in slave mode
+ *
+ * Blocks until the SPI peripheral can be written to
+ * @param[in] obj The SPI peripheral to write
+ * @param[in] value The value to write
+ */
+void spi_slave_write(spi_t *obj, int value);
+
+/** Checks if the specified SPI peripheral is in use
+ *
+ * @param[in] obj The SPI peripheral to check
+ * @return non-zero if the peripheral is currently transmitting
+ */
+int spi_busy(spi_t *obj);
+
+/** Get the module number
+ *
+ * @param[in] obj The SPI peripheral to check
+ * @return The module number
+ */
+uint8_t spi_get_module(spi_t *obj);
+
+/**@}*/
+
+#if DEVICE_SPI_ASYNCH
+/**
+ * \defgroup AsynchSPI Asynchronous SPI Hardware Abstraction Layer
+ * @{
+ */
+
+/** Begin the SPI transfer. Buffer pointers and lengths are specified in tx_buff and rx_buff
+ *
+ * @param[in] obj The SPI object which holds the transfer information
+ * @param[in] tx The buffer to send
+ * @param[in] tx_length The number of words to transmit
+ * @param[in] rx The buffer to receive
+ * @param[in] rx_length The number of words to receive
+ * @param[in] bit_width The bit width of buffer words
+ * @param[in] event The logical OR of events to be registered
+ * @param[in] handler SPI interrupt handler
+ * @param[in] hint A suggestion for how to use DMA with this transfer
+ */
+void spi_master_transfer(spi_t *obj, void *tx, size_t tx_length, void *rx, size_t rx_length, uint8_t bit_width, uint32_t handler, uint32_t event, DMAUsage hint);
+
+/** The asynchronous IRQ handler
+ *
+ * Reads the received values out of the RX FIFO, writes values into the TX FIFO and checks for transfer termination
+ * conditions, such as buffer overflows or transfer complete.
+ * @param[in] obj The SPI object which holds the transfer information
+ * @return event flags if a transfer termination condition was met or 0 otherwise.
+ */
+uint32_t spi_irq_handler_asynch(spi_t *obj);
+
+/** Attempts to determine if the SPI peripheral is already in use.
+ *
+ * If a temporary DMA channel has been allocated, peripheral is in use.
+ * If a permanent DMA channel has been allocated, check if the DMA channel is in use. If not, proceed as though no DMA
+ * channel were allocated.
+ * If no DMA channel is allocated, check whether tx and rx buffers have been assigned. For each assigned buffer, check
+ * if the corresponding buffer position is less than the buffer length. If buffers do not indicate activity, check if
+ * there are any bytes in the FIFOs.
+ * @param[in] obj The SPI object to check for activity
+ * @return non-zero if the SPI port is active or zero if it is not.
+ */
+uint8_t spi_active(spi_t *obj);
+
+/** Abort an SPI transfer
+ *
+ * @param obj The SPI peripheral to stop
+ */
+void spi_abort_asynch(spi_t *obj);
+
+
+#endif
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif // __cplusplus
+
+#endif // SPI_DEVICE
+
+#endif // MBED_SPI_API_H
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/ticker_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,108 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TICKER_API_H
+#define MBED_TICKER_API_H
+
+#include "device.h"
+
+typedef uint32_t timestamp_t;
+
+/** Ticker's event structure
+ */
+typedef struct ticker_event_s {
+ timestamp_t timestamp; /**< Event's timestamp */
+ uint32_t id; /**< TimerEvent object */
+ struct ticker_event_s *next; /**< Next event in the queue */
+} ticker_event_t;
+
+typedef void (*ticker_event_handler)(uint32_t id);
+
+/** Ticker's interface structure - required API for a ticker
+ */
+typedef struct {
+ void (*init)(void); /**< Init function */
+ uint32_t (*read)(void); /**< Read function */
+ void (*disable_interrupt)(void); /**< Disable interrupt function */
+ void (*clear_interrupt)(void); /**< Clear interrupt function */
+ void (*set_interrupt)(timestamp_t timestamp); /**< Set interrupt function */
+} ticker_interface_t;
+
+/** Tickers events queue structure
+ */
+typedef struct {
+ ticker_event_handler event_handler; /**< Event handler */
+ ticker_event_t *head; /**< A pointer to head */
+} ticker_event_queue_t;
+
+/** Tickers data structure
+ */
+typedef struct {
+ const ticker_interface_t *interface; /**< Ticker's interface */
+ ticker_event_queue_t *queue; /**< Ticker's events queue */
+} ticker_data_t;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Initialize a ticker and sets the event handler
+ *
+ * @param data The ticker's data
+ * @param handler A handler to be set
+ */
+void ticker_set_handler(const ticker_data_t *const data, ticker_event_handler handler);
+
+/** Irq handler which goes through the events to trigger events in the past.
+ *
+ * @param data The ticker's data
+ */
+void ticker_irq_handler(const ticker_data_t *const data);
+
+/** Remove an event from the queue
+ *
+ * @param data The ticker's data
+ * @param obj The event's queue to be removed
+ */
+void ticker_remove_event(const ticker_data_t *const data, ticker_event_t *obj);
+
+/** Insert an event from the queue
+ *
+ * @param data The ticker's data
+ * @param obj The event's queue to be removed
+ * @param timestamp The event's timestamp
+ * @param id The event object
+ */
+void ticker_insert_event(const ticker_data_t *const data, ticker_event_t *obj, timestamp_t timestamp, uint32_t id);
+
+/** Read the current ticker's timestamp
+ *
+ * @param data The ticker's data
+ * @return The current timestamp
+ */
+timestamp_t ticker_read(const ticker_data_t *const data);
+
+/** Read the next event's timestamp
+ *
+ * @param data The ticker's data
+ * @return 1 if timestamp is pending event, 0 if there's no event pending
+ */
+int ticker_get_next_timestamp(const ticker_data_t *const data, timestamp_t *timestamp);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/toolchain.h Fri Dec 03 23:00:34 2021 +0000 @@ -0,0 +1,35 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_TOOLCHAIN_H +#define MBED_TOOLCHAIN_H + +#if defined(TOOLCHAIN_ARM) +#include <rt_sys.h> +#endif + +#ifndef FILEHANDLE +typedef int FILEHANDLE; +#endif + +#if defined (__ICCARM__) +# define WEAK __weak +# define PACKED __packed +#else +# define WEAK __attribute__((weak)) +# define PACKED __attribute__((packed)) +#endif + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/us_ticker_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,78 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_US_TICKER_API_H
+#define MBED_US_TICKER_API_H
+
+#include <stdint.h>
+#include "ticker_api.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup UsTicker Microseconds Ticker Functions
+ * @{
+ */
+
+/** Get ticker's data
+ *
+ * @return The low power ticker data
+ */
+const ticker_data_t* get_us_ticker_data(void);
+
+
+/** The wrapper for ticker_irq_handler, to pass us ticker's data
+ *
+ */
+void us_ticker_irq_handler(void);
+
+/* HAL us ticker */
+
+/** Initialize the ticker
+ *
+ */
+void us_ticker_init(void);
+
+/** Read the current counter
+ *
+ * @return The current timer's counter value in microseconds
+ */
+uint32_t us_ticker_read(void);
+
+/** Set interrupt for specified timestamp
+ *
+ * @param timestamp The time in microseconds to be set
+ */
+void us_ticker_set_interrupt(timestamp_t timestamp);
+
+/** Disable us ticker interrupt
+ *
+ */
+void us_ticker_disable_interrupt(void);
+
+/** Clear us ticker interrupt
+ *
+ */
+void us_ticker_clear_interrupt(void);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/wait_api.h Fri Dec 03 23:00:34 2021 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_WAIT_API_H
+#define MBED_WAIT_API_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Generic wait functions.
+ *
+ * These provide simple NOP type wait capabilities.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * DigitalOut heartbeat(LED1);
+ *
+ * int main() {
+ * while (1) {
+ * heartbeat = 1;
+ * wait(0.5);
+ * heartbeat = 0;
+ * wait(0.5);
+ * }
+ * }
+ */
+
+/** Waits for a number of seconds, with microsecond resolution (within
+ * the accuracy of single precision floating point).
+ *
+ * @param s number of seconds to wait
+ */
+void wait(float s);
+
+/** Waits a number of milliseconds.
+ *
+ * @param ms the whole number of milliseconds to wait
+ */
+void wait_ms(int ms);
+
+/** Waits a number of microseconds.
+ *
+ * @param us the whole number of microseconds to wait
+ */
+void wait_us(int us);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif