mattia griotti
Simple "hello world" style program for X-NUCLEO-IKS01A1 MEMS Inertial
Dependencies: BLE_API X_NUCLEO_IDB0XA1 X_NUCLEO_IKS01A1 mbed
Fork of
HelloWorld_IKS01A1
by 
ST
Revision 8:1c6281289d67, committed 2015-11-15
- Comitter:
- n0tform3
- Date:
- Sun Nov 15 09:00:40 2015 +0000
- Parent:
- 7:4985455162fc
- Commit message:
- test with led
Changed in this revision
diff -r 4985455162fc -r 1c6281289d67 led_RGB.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/led_RGB.c Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,71 @@
+#include "led_RGB.h"
+#include "stm32f4xx_conf.h"
+#include "stm32f4xx.h"
+#include "main.h"
+
+void Blue_Red_Setup(void)
+{
+ TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
+ TIM_OCInitTypeDef TIM_OCInitStructure;
+ GPIO_InitTypeDef GPIO_InitStructure;
+
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource6, GPIO_AF_TIM4);
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource0, GPIO_AF_TIM3);
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource1, GPIO_AF_TIM3);
+
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_6;
+ GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
+ GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
+ GPIO_Init(GPIOB, &GPIO_InitStructure);
+
+ TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;
+ TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
+ TIM_TimeBaseStructure.TIM_Prescaler = (uint16_t) (RealSysClock / 50000) - 1;
+ TIM_TimeBaseStructure.TIM_Period = 255; //f = 0.25KHz
+ TIM_TimeBaseStructure.TIM_RepetitionCounter = 0;
+ TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure);
+
+ TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
+ TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
+ TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
+ TIM_OCInitStructure.TIM_Pulse = 150; //registro confrontato con oc
+ TIM_OC3Init(TIM3, &TIM_OCInitStructure);
+
+ TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
+ TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
+ TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
+ TIM_OCInitStructure.TIM_Pulse = 150; //registro confrontato con oc
+ TIM_OC4Init(TIM3, &TIM_OCInitStructure);
+
+ TIM_OC3PreloadConfig(TIM3, TIM_OCPreload_Enable);
+ TIM_OC4PreloadConfig(TIM3, TIM_OCPreload_Enable);
+
+}
+
+void Green_Setup(void)
+{
+ TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
+ TIM_OCInitTypeDef TIM_OCInitStructure;
+
+ TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;
+ TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
+ TIM_TimeBaseStructure.TIM_Prescaler = (uint16_t) (RealSysClock / 50000) - 1;
+ TIM_TimeBaseStructure.TIM_Period = 255; //f = 0.25KHz
+ TIM_TimeBaseStructure.TIM_RepetitionCounter = 0;
+ TIM_TimeBaseInit(TIM4, &TIM_TimeBaseStructure);
+
+ TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
+ TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
+ TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
+ TIM_OCInitStructure.TIM_Pulse = 150; //registro confrontato con oc
+ TIM_OC1Init(TIM4, &TIM_OCInitStructure);
+
+ TIM_OC1PreloadConfig(TIM4, TIM_OCPreload_Enable);
+
+ TIM_Cmd (TIM4, ENABLE);
+ TIM_Cmd (TIM3, ENABLE);
+
+}
+
diff -r 4985455162fc -r 1c6281289d67 led_RGB.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/led_RGB.h Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,20 @@
+#ifndef LED_H_
+#define LED_H_
+
+typedef enum{
+ NOP,
+ DO,
+ RE,
+ MI,
+ FA,
+ SOL,
+ LA,
+ SI,
+ DO1,
+ }Nota;
+
+ void Blue_Red_Setup(void);
+ void Green_Setup(void);
+
+#endif
+
diff -r 4985455162fc -r 1c6281289d67 main.cpp
--- a/main.cpp Sun Nov 15 07:30:17 2015 +0000
+++ b/main.cpp Sun Nov 15 09:00:40 2015 +0000
@@ -5,6 +5,10 @@
#include "ble/services/HeartRateService.h"
#include "ble/services/BatteryService.h"
#include "ble/services/DeviceInformationService.h"
+//#include "stm32f4xx_conf.h"
+//#include "stm32f4xx.h"
+#include "led_RGB.h"
+#include "main.h"
BLE ble;
DigitalOut led1(LED1);
@@ -14,6 +18,8 @@
GattService::UUID_DEVICE_INFORMATION_SERVICE};
static volatile bool triggerSensorPolling = false;
+uint8_t clock_source;
+
void disconnectionCallback(const Gap::DisconnectionCallbackParams_t *params)
{
ble.gap().startAdvertising(); // restart advertising
@@ -39,10 +45,37 @@
pc.baud(115200);
printf("\r\n--- Starting new run ---\r\n");
+ RCC_DeInit();
+ RCC_HSICmd(ENABLE);
+ while(RCC_GetFlagStatus(RCC_FLAG_HSIRDY) == RESET);
+ RCC_PLLConfig(RCC_PLLSource_HSI, 8, 336, 4, 7);
+ RCC_PLLCmd(ENABLE);
+ while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY)==RESET);
+ RCC_HCLKConfig(RCC_SYSCLK_Div1);
+ RCC_PCLK2Config(RCC_HCLK_Div2); //APB2 84MHz/2 = 42MHz
+ RCC_PCLK1Config(RCC_HCLK_Div2);
+ clock_source = RCC_GetSYSCLKSource();
+ if (clock_source !=0)
+ RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
+ RCC_AHB1PeriphClockCmd( RCC_AHB1Periph_GPIOA |
+ RCC_AHB1Periph_GPIOB,
+ ENABLE);
+ RCC_APB1PeriphClockCmd( RCC_APB1Periph_TIM3 |
+ RCC_APB1Periph_TIM4 |
+ RCC_APB1Periph_TIM2,
+ ENABLE);
+ RCC_APB2PeriphClockCmd( RCC_APB2Periph_USART1,
+ ENABLE);
+
+ Blue_Red_Setup();
+ Green_Setup();
+
+
+
magnetometer->ReadID(&id);
printf("LIS3MDL magnetometer = 0x%X\r\n", id);
- led1 = 1;
+ led1 = 1;
Ticker ticker;
ticker.attach(periodicCallback, 1); // blink LED every second
@@ -100,5 +133,42 @@
} else {
ble.waitForEvent(); // low power wait for event
}
+ switch (note){
+ case DO: TIM_SetCompare4(TIM3, 255); //RED
+ TIM_SetCompare1(TIM4, 0); //GREEN
+ TIM_SetCompare3(TIM3, 0); //BLU
+ break;
+ case RE: TIM_SetCompare4(TIM3, 255); //RED
+ TIM_SetCompare1(TIM4, 153); //GREEN
+ TIM_SetCompare3(TIM3, 0); //BLU
+ break;
+ case MI: TIM_SetCompare4(TIM3, 255); //RED
+ TIM_SetCompare1(TIM4, 255); //GREEN
+ TIM_SetCompare3(TIM3, 0); //BLU
+ break;
+ case FA: TIM_SetCompare4(TIM3, 0); //RED
+ TIM_SetCompare1(TIM4, 255); //GREEN
+ TIM_SetCompare3(TIM3, 0); //BLU
+ break;
+ case SOL: TIM_SetCompare4(TIM3, 0); //RED
+ TIM_SetCompare1(TIM4, 0); //GREEN
+ TIM_SetCompare3(TIM3, 255); //BLU
+ break;
+ case LA: TIM_SetCompare4(TIM3, 51); //RED
+ TIM_SetCompare1(TIM4, 0); //GREEN
+ TIM_SetCompare3(TIM3, 153); //BLU
+ break;
+ case SI: TIM_SetCompare4(TIM3, 255); //RED
+ TIM_SetCompare1(TIM4, 0); //GREEN
+ TIM_SetCompare3(TIM3, 255); //BLU
+ break;
+ case DO1: TIM_SetCompare4(TIM3, 255); //RED
+ TIM_SetCompare1(TIM4, 255); //GREEN
+ TIM_SetCompare3(TIM3, 255); //BLU
+ break;
+ case default:
+ TIM_SetCompare4(TIM3, 0); //RED
+ TIM_SetCompare1(TIM4, 0); //GREEN
+ TIM_SetCompare3(TIM3, 0); //BLU
}
}
diff -r 4985455162fc -r 1c6281289d67 main.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.h Sun Nov 15 09:00:40 2015 +0000 @@ -0,0 +1,7 @@ +#ifndef MAIN_H_ +#define MAIN_H_ + +#define RealSysClock 84000000 + +#endif +
diff -r 4985455162fc -r 1c6281289d67 misc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/misc.c Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,244 @@
+/**
+ ******************************************************************************
+ * @file misc.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 30-September-2011
+ * @brief This file provides all the miscellaneous firmware functions (add-on
+ * to CMSIS functions).
+ *
+ * @verbatim
+ *
+ * ===================================================================
+ * How to configure Interrupts using driver
+ * ===================================================================
+ *
+ * This section provide functions allowing to configure the NVIC interrupts (IRQ).
+ * The Cortex-M4 exceptions are managed by CMSIS functions.
+ *
+ * 1. Configure the NVIC Priority Grouping using NVIC_PriorityGroupConfig()
+ * function according to the following table.
+
+ * The table below gives the allowed values of the pre-emption priority and subpriority according
+ * to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function
+ * ==========================================================================================================================
+ * NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description
+ * ==========================================================================================================================
+ * NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority
+ * | | | 4 bits for subpriority
+ * --------------------------------------------------------------------------------------------------------------------------
+ * NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority
+ * | | | 3 bits for subpriority
+ * --------------------------------------------------------------------------------------------------------------------------
+ * NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority
+ * | | | 2 bits for subpriority
+ * --------------------------------------------------------------------------------------------------------------------------
+ * NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority
+ * | | | 1 bits for subpriority
+ * --------------------------------------------------------------------------------------------------------------------------
+ * NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority
+ * | | | 0 bits for subpriority
+ * ==========================================================================================================================
+ *
+ * 2. Enable and Configure the priority of the selected IRQ Channels using NVIC_Init()
+ *
+ * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
+ * The pending IRQ priority will be managed only by the subpriority.
+ *
+ * @note IRQ priority order (sorted by highest to lowest priority):
+ * - Lowest pre-emption priority
+ * - Lowest subpriority
+ * - Lowest hardware priority (IRQ number)
+ *
+ * @endverbatim
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "misc.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup MISC
+ * @brief MISC driver modules
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000)
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup MISC_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Configures the priority grouping: pre-emption priority and subpriority.
+ * @param NVIC_PriorityGroup: specifies the priority grouping bits length.
+ * This parameter can be one of the following values:
+ * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority
+ * 4 bits for subpriority
+ * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority
+ * 3 bits for subpriority
+ * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority
+ * 2 bits for subpriority
+ * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority
+ * 1 bits for subpriority
+ * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority
+ * 0 bits for subpriority
+ * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible.
+ * The pending IRQ priority will be managed only by the subpriority.
+ * @retval None
+ */
+void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));
+
+ /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
+ SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;
+}
+
+/**
+ * @brief Initializes the NVIC peripheral according to the specified
+ * parameters in the NVIC_InitStruct.
+ * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+ * function should be called before.
+ * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
+ * the configuration information for the specified NVIC peripheral.
+ * @retval None
+ */
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
+{
+ uint8_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;
+
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
+ assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));
+ assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));
+
+ if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
+ {
+ /* Compute the Corresponding IRQ Priority --------------------------------*/
+ tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;
+ tmppre = (0x4 - tmppriority);
+ tmpsub = tmpsub >> tmppriority;
+
+ tmppriority = NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
+ tmppriority |= (uint8_t)(NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub);
+
+ tmppriority = tmppriority << 0x04;
+
+ NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;
+
+ /* Enable the Selected IRQ Channels --------------------------------------*/
+ NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+ (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+ }
+ else
+ {
+ /* Disable the Selected IRQ Channels -------------------------------------*/
+ NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+ (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+ }
+}
+
+/**
+ * @brief Sets the vector table location and Offset.
+ * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.
+ * This parameter can be one of the following values:
+ * @arg NVIC_VectTab_RAM: Vector Table in internal SRAM.
+ * @arg NVIC_VectTab_FLASH: Vector Table in internal FLASH.
+ * @param Offset: Vector Table base offset field. This value must be a multiple of 0x200.
+ * @retval None
+ */
+void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
+ assert_param(IS_NVIC_OFFSET(Offset));
+
+ SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);
+}
+
+/**
+ * @brief Selects the condition for the system to enter low power mode.
+ * @param LowPowerMode: Specifies the new mode for the system to enter low power mode.
+ * This parameter can be one of the following values:
+ * @arg NVIC_LP_SEVONPEND: Low Power SEV on Pend.
+ * @arg NVIC_LP_SLEEPDEEP: Low Power DEEPSLEEP request.
+ * @arg NVIC_LP_SLEEPONEXIT: Low Power Sleep on Exit.
+ * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_NVIC_LP(LowPowerMode));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ SCB->SCR |= LowPowerMode;
+ }
+ else
+ {
+ SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
+ }
+}
+
+/**
+ * @brief Configures the SysTick clock source.
+ * @param SysTick_CLKSource: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
+ if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
+ {
+ SysTick->CTRL |= SysTick_CLKSource_HCLK;
+ }
+ else
+ {
+ SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
+ }
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff -r 4985455162fc -r 1c6281289d67 misc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/misc.h Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,173 @@
+/**
+ ******************************************************************************
+ * @file misc.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 30-September-2011
+ * @brief This file contains all the functions prototypes for the miscellaneous
+ * firmware library functions (add-on to CMSIS functions).
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MISC_H
+#define __MISC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup MISC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief NVIC Init Structure definition
+ */
+
+typedef struct
+{
+ uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled.
+ This parameter can be an enumerator of @ref IRQn_Type
+ enumeration (For the complete STM32 Devices IRQ Channels
+ list, please refer to stm32f4xx.h file) */
+
+ uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel
+ specified in NVIC_IRQChannel. This parameter can be a value
+ between 0 and 15 as described in the table @ref MISC_NVIC_Priority_Table
+ A lower priority value indicates a higher priority */
+
+ uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified
+ in NVIC_IRQChannel. This parameter can be a value
+ between 0 and 15 as described in the table @ref MISC_NVIC_Priority_Table
+ A lower priority value indicates a higher priority */
+
+ FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel
+ will be enabled or disabled.
+ This parameter can be set either to ENABLE or DISABLE */
+} NVIC_InitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup MISC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup MISC_Vector_Table_Base
+ * @{
+ */
+
+#define NVIC_VectTab_RAM ((uint32_t)0x20000000)
+#define NVIC_VectTab_FLASH ((uint32_t)0x08000000)
+#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \
+ ((VECTTAB) == NVIC_VectTab_FLASH))
+/**
+ * @}
+ */
+
+/** @defgroup MISC_System_Low_Power
+ * @{
+ */
+
+#define NVIC_LP_SEVONPEND ((uint8_t)0x10)
+#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04)
+#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02)
+#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \
+ ((LP) == NVIC_LP_SLEEPDEEP) || \
+ ((LP) == NVIC_LP_SLEEPONEXIT))
+/**
+ * @}
+ */
+
+/** @defgroup MISC_Preemption_Priority_Group
+ * @{
+ */
+
+#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \
+ ((GROUP) == NVIC_PriorityGroup_1) || \
+ ((GROUP) == NVIC_PriorityGroup_2) || \
+ ((GROUP) == NVIC_PriorityGroup_3) || \
+ ((GROUP) == NVIC_PriorityGroup_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x000FFFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup MISC_SysTick_clock_source
+ * @{
+ */
+
+#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB)
+#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004)
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \
+ ((SOURCE) == SysTick_CLKSource_HCLK_Div8))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup);
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct);
+void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset);
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState);
+void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MISC_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff -r 4985455162fc -r 1c6281289d67 stm32f4xx.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32f4xx.h Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,7000 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 30-September-2011
+ * @brief CMSIS Cortex-M4 Device Peripheral Access Layer Header File.
+ * This file contains all the peripheral register's definitions, bits
+ * definitions and memory mapping for STM32F4xx devices.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The device used in the target application
+ * - To use or not the peripherals drivers in application code(i.e.
+ * code will be based on direct access to peripherals registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_STDPERIPH_DRIVER"
+ * - To change few application-specific parameters such as the HSE
+ * crystal frequency
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripherals registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx
+ * @{
+ */
+
+#ifndef __STM32F4xx_H
+#define __STM32F4xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F4XX)
+ #define STM32F4XX
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+
+#if !defined (STM32F4XX)
+ #error "Please select first the target STM32F4XX device used in your application (in stm32f4xx.h file)"
+#endif
+
+#if !defined (USE_STDPERIPH_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ /*#define USE_STDPERIPH_DRIVER*/
+#endif /* USE_STDPERIPH_DRIVER */
+
+/**
+ * @brief In the following line adjust the value of External High Speed oscillator (HSE)
+ used in your application
+
+ Tip: To avoid modifying this file each time you need to use different HSE, you
+ can define the HSE value in your toolchain compiler preprocessor.
+ */
+
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ Timeout value
+ */
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief STM32F4XX Standard Peripherals Library version number V1.0.0
+ */
+#define __STM32F4XX_STDPERIPH_VERSION_MAIN (0x01) /*!< [31:24] main version */
+#define __STM32F4XX_STDPERIPH_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
+#define __STM32F4XX_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32F4XX_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F4XX_STDPERIPH_VERSION ((__STM32F4XX_STDPERIPH_VERSION_MAIN << 24)\
+ |(__STM32F4XX_STDPERIPH_VERSION_SUB1 << 16)\
+ |(__STM32F4XX_STDPERIPH_VERSION_SUB2 << 8)\
+ |(__STM32F4XX_STDPERIPH_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001 /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1 /*!< STM32F4XX provides an MPU */
+#define __NVIC_PRIO_BITS 4 /*!< STM32F4XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< FPU present */
+
+/**
+ * @brief STM32F4XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum IRQn
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */
+ CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */
+ CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */
+ CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */
+ TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */
+ TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ FSMC_IRQn = 48, /*!< FSMC global Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */
+ TIM7_IRQn = 55, /*!< TIM7 global interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ ETH_IRQn = 61, /*!< Ethernet global Interrupt */
+ ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */
+ CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */
+ CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */
+ CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */
+ CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */
+ OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */
+ OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */
+ OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */
+ DCMI_IRQn = 78, /*!< DCMI global interrupt */
+ CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */
+ HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */
+ FPU_IRQn = 81 /*!< FPU global interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f4xx.h"
+#include <stdint.h>
+
+/** @addtogroup Exported_types
+ * @{
+ */
+/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */
+typedef int32_t s32;
+typedef int16_t s16;
+typedef int8_t s8;
+
+typedef const int32_t sc32; /*!< Read Only */
+typedef const int16_t sc16; /*!< Read Only */
+typedef const int8_t sc8; /*!< Read Only */
+
+typedef __IO int32_t vs32;
+typedef __IO int16_t vs16;
+typedef __IO int8_t vs8;
+
+typedef __I int32_t vsc32; /*!< Read Only */
+typedef __I int16_t vsc16; /*!< Read Only */
+typedef __I int8_t vsc8; /*!< Read Only */
+
+typedef uint32_t u32;
+typedef uint16_t u16;
+typedef uint8_t u8;
+
+typedef const uint32_t uc32; /*!< Read Only */
+typedef const uint16_t uc16; /*!< Read Only */
+typedef const uint8_t uc8; /*!< Read Only */
+
+typedef __IO uint32_t vu32;
+typedef __IO uint16_t vu16;
+typedef __IO uint8_t vu8;
+
+typedef __I uint32_t vuc32; /*!< Read Only */
+typedef __I uint16_t vuc16; /*!< Read Only */
+typedef __I uint8_t vuc8; /*!< Read Only */
+
+typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus;
+
+typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DCMI
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */
+ __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */
+ __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */
+ __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */
+ __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */
+ __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */
+ __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */
+ __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */
+ __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */
+} DCMI_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+/**
+ * @brief Ethernet MAC
+ */
+
+typedef struct
+{
+ __IO uint32_t MACCR;
+ __IO uint32_t MACFFR;
+ __IO uint32_t MACHTHR;
+ __IO uint32_t MACHTLR;
+ __IO uint32_t MACMIIAR;
+ __IO uint32_t MACMIIDR;
+ __IO uint32_t MACFCR;
+ __IO uint32_t MACVLANTR; /* 8 */
+ uint32_t RESERVED0[2];
+ __IO uint32_t MACRWUFFR; /* 11 */
+ __IO uint32_t MACPMTCSR;
+ uint32_t RESERVED1[2];
+ __IO uint32_t MACSR; /* 15 */
+ __IO uint32_t MACIMR;
+ __IO uint32_t MACA0HR;
+ __IO uint32_t MACA0LR;
+ __IO uint32_t MACA1HR;
+ __IO uint32_t MACA1LR;
+ __IO uint32_t MACA2HR;
+ __IO uint32_t MACA2LR;
+ __IO uint32_t MACA3HR;
+ __IO uint32_t MACA3LR; /* 24 */
+ uint32_t RESERVED2[40];
+ __IO uint32_t MMCCR; /* 65 */
+ __IO uint32_t MMCRIR;
+ __IO uint32_t MMCTIR;
+ __IO uint32_t MMCRIMR;
+ __IO uint32_t MMCTIMR; /* 69 */
+ uint32_t RESERVED3[14];
+ __IO uint32_t MMCTGFSCCR; /* 84 */
+ __IO uint32_t MMCTGFMSCCR;
+ uint32_t RESERVED4[5];
+ __IO uint32_t MMCTGFCR;
+ uint32_t RESERVED5[10];
+ __IO uint32_t MMCRFCECR;
+ __IO uint32_t MMCRFAECR;
+ uint32_t RESERVED6[10];
+ __IO uint32_t MMCRGUFCR;
+ uint32_t RESERVED7[334];
+ __IO uint32_t PTPTSCR;
+ __IO uint32_t PTPSSIR;
+ __IO uint32_t PTPTSHR;
+ __IO uint32_t PTPTSLR;
+ __IO uint32_t PTPTSHUR;
+ __IO uint32_t PTPTSLUR;
+ __IO uint32_t PTPTSAR;
+ __IO uint32_t PTPTTHR;
+ __IO uint32_t PTPTTLR;
+ __IO uint32_t RESERVED8;
+ __IO uint32_t PTPTSSR;
+ uint32_t RESERVED9[565];
+ __IO uint32_t DMABMR;
+ __IO uint32_t DMATPDR;
+ __IO uint32_t DMARPDR;
+ __IO uint32_t DMARDLAR;
+ __IO uint32_t DMATDLAR;
+ __IO uint32_t DMASR;
+ __IO uint32_t DMAOMR;
+ __IO uint32_t DMAIER;
+ __IO uint32_t DMAMFBOCR;
+ __IO uint32_t DMARSWTR;
+ uint32_t RESERVED10[8];
+ __IO uint32_t DMACHTDR;
+ __IO uint32_t DMACHRDR;
+ __IO uint32_t DMACHTBAR;
+ __IO uint32_t DMACHRBAR;
+} ETH_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register, Address offset: 0x14 */
+} FLASH_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */
+} FSMC_Bank1_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank1E
+ */
+
+typedef struct
+{
+ __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FSMC_Bank1E_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank2
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */
+ __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */
+ __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */
+ __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */
+ uint32_t RESERVED0; /*!< Reserved, 0x70 */
+ __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */
+} FSMC_Bank2_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank3
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */
+ __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */
+ __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */
+ __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */
+ uint32_t RESERVED0; /*!< Reserved, 0x90 */
+ __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */
+} FSMC_Bank3_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank4
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */
+ __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */
+ __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */
+ __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */
+ __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */
+} FSMC_Bank4_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint16_t BSRRL; /*!< GPIO port bit set/reset low register, Address offset: 0x18 */
+ __IO uint16_t BSRRH; /*!< GPIO port bit set/reset high register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint16_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint16_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ uint16_t RESERVED2; /*!< Reserved, 0x0A */
+ __IO uint16_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ uint16_t RESERVED3; /*!< Reserved, 0x0E */
+ __IO uint16_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ uint16_t RESERVED4; /*!< Reserved, 0x12 */
+ __IO uint16_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ uint16_t RESERVED5; /*!< Reserved, 0x16 */
+ __IO uint16_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ uint16_t RESERVED6; /*!< Reserved, 0x1A */
+ __IO uint16_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ uint16_t RESERVED7; /*!< Reserved, 0x1E */
+ __IO uint16_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+ uint16_t RESERVED8; /*!< Reserved, 0x22 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint16_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint16_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t SR; /*!< SPI status register, Address offset: 0x08 */
+ uint16_t RESERVED2; /*!< Reserved, 0x0A */
+ __IO uint16_t DR; /*!< SPI data register, Address offset: 0x0C */
+ uint16_t RESERVED3; /*!< Reserved, 0x0E */
+ __IO uint16_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ uint16_t RESERVED4; /*!< Reserved, 0x12 */
+ __IO uint16_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ uint16_t RESERVED5; /*!< Reserved, 0x16 */
+ __IO uint16_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ uint16_t RESERVED6; /*!< Reserved, 0x1A */
+ __IO uint16_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ uint16_t RESERVED7; /*!< Reserved, 0x1E */
+ __IO uint16_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+ uint16_t RESERVED8; /*!< Reserved, 0x22 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint16_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint16_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ uint16_t RESERVED2; /*!< Reserved, 0x0A */
+ __IO uint16_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ uint16_t RESERVED3; /*!< Reserved, 0x0E */
+ __IO uint16_t SR; /*!< TIM status register, Address offset: 0x10 */
+ uint16_t RESERVED4; /*!< Reserved, 0x12 */
+ __IO uint16_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ uint16_t RESERVED5; /*!< Reserved, 0x16 */
+ __IO uint16_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ uint16_t RESERVED6; /*!< Reserved, 0x1A */
+ __IO uint16_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ uint16_t RESERVED7; /*!< Reserved, 0x1E */
+ __IO uint16_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ uint16_t RESERVED8; /*!< Reserved, 0x22 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint16_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ uint16_t RESERVED9; /*!< Reserved, 0x2A */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint16_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ uint16_t RESERVED10; /*!< Reserved, 0x32 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint16_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ uint16_t RESERVED11; /*!< Reserved, 0x46 */
+ __IO uint16_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ uint16_t RESERVED12; /*!< Reserved, 0x4A */
+ __IO uint16_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ uint16_t RESERVED13; /*!< Reserved, 0x4E */
+ __IO uint16_t OR; /*!< TIM option register, Address offset: 0x50 */
+ uint16_t RESERVED14; /*!< Reserved, 0x52 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint16_t SR; /*!< USART Status register, Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint16_t DR; /*!< USART Data register, Address offset: 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ uint16_t RESERVED2; /*!< Reserved, 0x0A */
+ __IO uint16_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ uint16_t RESERVED3; /*!< Reserved, 0x0E */
+ __IO uint16_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ uint16_t RESERVED4; /*!< Reserved, 0x12 */
+ __IO uint16_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ uint16_t RESERVED5; /*!< Reserved, 0x16 */
+ __IO uint16_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+ uint16_t RESERVED6; /*!< Reserved, 0x1A */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+/**
+ * @brief Crypto Processor
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< CRYP control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< CRYP status register, Address offset: 0x04 */
+ __IO uint32_t DR; /*!< CRYP data input register, Address offset: 0x08 */
+ __IO uint32_t DOUT; /*!< CRYP data output register, Address offset: 0x0C */
+ __IO uint32_t DMACR; /*!< CRYP DMA control register, Address offset: 0x10 */
+ __IO uint32_t IMSCR; /*!< CRYP interrupt mask set/clear register, Address offset: 0x14 */
+ __IO uint32_t RISR; /*!< CRYP raw interrupt status register, Address offset: 0x18 */
+ __IO uint32_t MISR; /*!< CRYP masked interrupt status register, Address offset: 0x1C */
+ __IO uint32_t K0LR; /*!< CRYP key left register 0, Address offset: 0x20 */
+ __IO uint32_t K0RR; /*!< CRYP key right register 0, Address offset: 0x24 */
+ __IO uint32_t K1LR; /*!< CRYP key left register 1, Address offset: 0x28 */
+ __IO uint32_t K1RR; /*!< CRYP key right register 1, Address offset: 0x2C */
+ __IO uint32_t K2LR; /*!< CRYP key left register 2, Address offset: 0x30 */
+ __IO uint32_t K2RR; /*!< CRYP key right register 2, Address offset: 0x34 */
+ __IO uint32_t K3LR; /*!< CRYP key left register 3, Address offset: 0x38 */
+ __IO uint32_t K3RR; /*!< CRYP key right register 3, Address offset: 0x3C */
+ __IO uint32_t IV0LR; /*!< CRYP initialization vector left-word register 0, Address offset: 0x40 */
+ __IO uint32_t IV0RR; /*!< CRYP initialization vector right-word register 0, Address offset: 0x44 */
+ __IO uint32_t IV1LR; /*!< CRYP initialization vector left-word register 1, Address offset: 0x48 */
+ __IO uint32_t IV1RR; /*!< CRYP initialization vector right-word register 1, Address offset: 0x4C */
+} CRYP_TypeDef;
+
+/**
+ * @brief HASH
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */
+ __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */
+ __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */
+ __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */
+ __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */
+ __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */
+ uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */
+ __IO uint32_t CSR[51]; /*!< HASH context swap registers, Address offset: 0x0F8-0x1C0 */
+} HASH_TypeDef;
+
+/**
+ * @brief HASH
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */
+ __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */
+} RNG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH(up to 1 MB) base address in the alias region */
+#define CCMDATARAM_BASE ((uint32_t)0x10000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the alias region */
+#define SRAM1_BASE ((uint32_t)0x20000000) /*!< SRAM1(112 KB) base address in the alias region */
+#define SRAM2_BASE ((uint32_t)0x2001C000) /*!< SRAM2(16 KB) base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+#define BKPSRAM_BASE ((uint32_t)0x40024000) /*!< Backup SRAM(4 KB) base address in the alias region */
+#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */
+
+#define CCMDATARAM_BB_BASE ((uint32_t)0x12000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the bit-band region */
+#define SRAM1_BB_BASE ((uint32_t)0x22000000) /*!< SRAM1(112 KB) base address in the bit-band region */
+#define SRAM2_BB_BASE ((uint32_t)0x2201C000) /*!< SRAM2(16 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+#define BKPSRAM_BB_BASE ((uint32_t)0x42024000) /*!< Backup SRAM(4 KB) base address in the bit-band region */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x1000)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x1400)
+#define TIM12_BASE (APB1PERIPH_BASE + 0x1800)
+#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00)
+#define TIM14_BASE (APB1PERIPH_BASE + 0x2000)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000)
+#define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00)
+#define I2S3ext_BASE (APB1PERIPH_BASE + 0x4000)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400)
+#define USART3_BASE (APB1PERIPH_BASE + 0x4800)
+#define UART4_BASE (APB1PERIPH_BASE + 0x4C00)
+#define UART5_BASE (APB1PERIPH_BASE + 0x5000)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00)
+#define CAN1_BASE (APB1PERIPH_BASE + 0x6400)
+#define CAN2_BASE (APB1PERIPH_BASE + 0x6800)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000)
+#define DAC_BASE (APB1PERIPH_BASE + 0x7400)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000)
+#define TIM8_BASE (APB2PERIPH_BASE + 0x0400)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000)
+#define ADC2_BASE (APB2PERIPH_BASE + 0x2100)
+#define ADC3_BASE (APB2PERIPH_BASE + 0x2200)
+#define ADC_BASE (APB2PERIPH_BASE + 0x2300)
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000)
+#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400)
+#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00)
+#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8)
+#define ETH_BASE (AHB1PERIPH_BASE + 0x8000)
+#define ETH_MAC_BASE (ETH_BASE)
+#define ETH_MMC_BASE (ETH_BASE + 0x0100)
+#define ETH_PTP_BASE (ETH_BASE + 0x0700)
+#define ETH_DMA_BASE (ETH_BASE + 0x1000)
+
+/*!< AHB2 peripherals */
+#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000)
+#define CRYP_BASE (AHB2PERIPH_BASE + 0x60000)
+#define HASH_BASE (AHB2PERIPH_BASE + 0x60400)
+#define RNG_BASE (AHB2PERIPH_BASE + 0x60800)
+
+/*!< FSMC Bankx registers base address */
+#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000)
+#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104)
+#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060)
+#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080)
+#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE ((uint32_t )0xE0042000)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12 ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13 ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define UART4 ((USART_TypeDef *) UART4_BASE)
+#define UART5 ((USART_TypeDef *) UART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define CAN1 ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2 ((CAN_TypeDef *) CAN2_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define TIM8 ((TIM_TypeDef *) TIM8_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3 ((ADC_TypeDef *) ADC3_BASE)
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define ETH ((ETH_TypeDef *) ETH_BASE)
+#define DCMI ((DCMI_TypeDef *) DCMI_BASE)
+#define CRYP ((CRYP_TypeDef *) CRYP_BASE)
+#define HASH ((HASH_TypeDef *) HASH_BASE)
+#define RNG ((RNG_TypeDef *) RNG_BASE)
+#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE)
+#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE)
+#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE)
+#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE)
+#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD ((uint8_t)0x01) /*!<Analog watchdog flag */
+#define ADC_SR_EOC ((uint8_t)0x02) /*!<End of conversion */
+#define ADC_SR_JEOC ((uint8_t)0x04) /*!<Injected channel end of conversion */
+#define ADC_SR_JSTRT ((uint8_t)0x08) /*!<Injected channel Start flag */
+#define ADC_SR_STRT ((uint8_t)0x10) /*!<Regular channel Start flag */
+#define ADC_SR_OVR ((uint8_t)0x20) /*!<Overrun flag */
+
+/******************* Bit definition for ADC_CR1 register ********************/
+#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!<AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!<Interrupt enable for EOC */
+#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!<AAnalog Watchdog interrupt enable */
+#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!<Interrupt enable for injected channels */
+#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!<Scan mode */
+#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!<Enable the watchdog on a single channel in scan mode */
+#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!<Automatic injected group conversion */
+#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!<Discontinuous mode on regular channels */
+#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!<Discontinuous mode on injected channels */
+#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!<DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!<Analog watchdog enable on injected channels */
+#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!<Analog watchdog enable on regular channels */
+#define ADC_CR1_RES ((uint32_t)0x03000000) /*!<RES[2:0] bits (Resolution) */
+#define ADC_CR1_RES_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_CR1_RES_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_CR1_OVRIE ((uint32_t)0x04000000) /*!<overrun interrupt enable */
+
+/******************* Bit definition for ADC_CR2 register ********************/
+#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!<A/D Converter ON / OFF */
+#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!<Continuous Conversion */
+#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!<Direct Memory access mode */
+#define ADC_CR2_DDS ((uint32_t)0x00000200) /*!<DMA disable selection (Single ADC) */
+#define ADC_CR2_EOCS ((uint32_t)0x00000400) /*!<End of conversion selection */
+#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!<Data Alignment */
+#define ADC_CR2_JEXTSEL ((uint32_t)0x000F0000) /*!<JEXTSEL[3:0] bits (External event select for injected group) */
+#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define ADC_CR2_JEXTSEL_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define ADC_CR2_JEXTEN ((uint32_t)0x00300000) /*!<JEXTEN[1:0] bits (External Trigger Conversion mode for injected channelsp) */
+#define ADC_CR2_JEXTEN_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_CR2_JEXTEN_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_CR2_JSWSTART ((uint32_t)0x00400000) /*!<Start Conversion of injected channels */
+#define ADC_CR2_EXTSEL ((uint32_t)0x0F000000) /*!<EXTSEL[3:0] bits (External Event Select for regular group) */
+#define ADC_CR2_EXTSEL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_CR2_EXTSEL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_CR2_EXTSEL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define ADC_CR2_EXTSEL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define ADC_CR2_EXTEN ((uint32_t)0x30000000) /*!<EXTEN[1:0] bits (External Trigger Conversion mode for regular channelsp) */
+#define ADC_CR2_EXTEN_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define ADC_CR2_EXTEN_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define ADC_CR2_SWSTART ((uint32_t)0x40000000) /*!<Start Conversion of regular channels */
+
+/****************** Bit definition for ADC_SMPR1 register *******************/
+#define ADC_SMPR1_SMP10 ((uint32_t)0x00000007) /*!<SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define ADC_SMPR1_SMP10_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SMPR1_SMP10_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SMPR1_SMP10_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SMPR1_SMP11 ((uint32_t)0x00000038) /*!<SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define ADC_SMPR1_SMP11_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define ADC_SMPR1_SMP11_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define ADC_SMPR1_SMP11_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define ADC_SMPR1_SMP12 ((uint32_t)0x000001C0) /*!<SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define ADC_SMPR1_SMP12_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define ADC_SMPR1_SMP12_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define ADC_SMPR1_SMP12_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define ADC_SMPR1_SMP13 ((uint32_t)0x00000E00) /*!<SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define ADC_SMPR1_SMP13_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define ADC_SMPR1_SMP13_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define ADC_SMPR1_SMP13_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define ADC_SMPR1_SMP14 ((uint32_t)0x00007000) /*!<SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define ADC_SMPR1_SMP14_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP14_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP14_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP15 ((uint32_t)0x00038000) /*!<SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define ADC_SMPR1_SMP15_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP15_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP15_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP16 ((uint32_t)0x001C0000) /*!<SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define ADC_SMPR1_SMP16_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP16_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP16_2 ((uint32_t)0x00100000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP17 ((uint32_t)0x00E00000) /*!<SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define ADC_SMPR1_SMP17_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP17_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP17_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP18 ((uint32_t)0x07000000) /*!<SMP18[2:0] bits (Channel 18 Sample time selection) */
+#define ADC_SMPR1_SMP18_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP18_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP18_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+
+/****************** Bit definition for ADC_SMPR2 register *******************/
+#define ADC_SMPR2_SMP0 ((uint32_t)0x00000007) /*!<SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define ADC_SMPR2_SMP0_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SMPR2_SMP0_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SMPR2_SMP0_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SMPR2_SMP1 ((uint32_t)0x00000038) /*!<SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define ADC_SMPR2_SMP1_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define ADC_SMPR2_SMP1_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define ADC_SMPR2_SMP1_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define ADC_SMPR2_SMP2 ((uint32_t)0x000001C0) /*!<SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define ADC_SMPR2_SMP2_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define ADC_SMPR2_SMP2_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define ADC_SMPR2_SMP2_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define ADC_SMPR2_SMP3 ((uint32_t)0x00000E00) /*!<SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define ADC_SMPR2_SMP3_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define ADC_SMPR2_SMP3_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define ADC_SMPR2_SMP3_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define ADC_SMPR2_SMP4 ((uint32_t)0x00007000) /*!<SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define ADC_SMPR2_SMP4_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP4_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP4_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP5 ((uint32_t)0x00038000) /*!<SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define ADC_SMPR2_SMP5_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP5_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP5_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP6 ((uint32_t)0x001C0000) /*!<SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define ADC_SMPR2_SMP6_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP6_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP6_2 ((uint32_t)0x00100000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP7 ((uint32_t)0x00E00000) /*!<SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define ADC_SMPR2_SMP7_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP7_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP7_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP8 ((uint32_t)0x07000000) /*!<SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define ADC_SMPR2_SMP8_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP8_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP8_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP9 ((uint32_t)0x38000000) /*!<SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define ADC_SMPR2_SMP9_0 ((uint32_t)0x08000000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP9_1 ((uint32_t)0x10000000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP9_2 ((uint32_t)0x20000000) /*!<Bit 2 */
+
+/****************** Bit definition for ADC_JOFR1 register *******************/
+#define ADC_JOFR1_JOFFSET1 ((uint16_t)0x0FFF) /*!<Data offset for injected channel 1 */
+
+/****************** Bit definition for ADC_JOFR2 register *******************/
+#define ADC_JOFR2_JOFFSET2 ((uint16_t)0x0FFF) /*!<Data offset for injected channel 2 */
+
+/****************** Bit definition for ADC_JOFR3 register *******************/
+#define ADC_JOFR3_JOFFSET3 ((uint16_t)0x0FFF) /*!<Data offset for injected channel 3 */
+
+/****************** Bit definition for ADC_JOFR4 register *******************/
+#define ADC_JOFR4_JOFFSET4 ((uint16_t)0x0FFF) /*!<Data offset for injected channel 4 */
+
+/******************* Bit definition for ADC_HTR register ********************/
+#define ADC_HTR_HT ((uint16_t)0x0FFF) /*!<Analog watchdog high threshold */
+
+/******************* Bit definition for ADC_LTR register ********************/
+#define ADC_LTR_LT ((uint16_t)0x0FFF) /*!<Analog watchdog low threshold */
+
+/******************* Bit definition for ADC_SQR1 register *******************/
+#define ADC_SQR1_SQ13 ((uint32_t)0x0000001F) /*!<SQ13[4:0] bits (13th conversion in regular sequence) */
+#define ADC_SQR1_SQ13_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR1_SQ13_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR1_SQ13_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR1_SQ13_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR1_SQ13_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR1_SQ14 ((uint32_t)0x000003E0) /*!<SQ14[4:0] bits (14th conversion in regular sequence) */
+#define ADC_SQR1_SQ14_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR1_SQ14_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR1_SQ14_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR1_SQ14_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR1_SQ14_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR1_SQ15 ((uint32_t)0x00007C00) /*!<SQ15[4:0] bits (15th conversion in regular sequence) */
+#define ADC_SQR1_SQ15_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR1_SQ15_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR1_SQ15_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR1_SQ15_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR1_SQ15_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR1_SQ16 ((uint32_t)0x000F8000) /*!<SQ16[4:0] bits (16th conversion in regular sequence) */
+#define ADC_SQR1_SQ16_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR1_SQ16_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR1_SQ16_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR1_SQ16_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR1_SQ16_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!<L[3:0] bits (Regular channel sequence length) */
+#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+/******************* Bit definition for ADC_SQR2 register *******************/
+#define ADC_SQR2_SQ7 ((uint32_t)0x0000001F) /*!<SQ7[4:0] bits (7th conversion in regular sequence) */
+#define ADC_SQR2_SQ7_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR2_SQ7_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR2_SQ7_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR2_SQ7_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR2_SQ7_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR2_SQ8 ((uint32_t)0x000003E0) /*!<SQ8[4:0] bits (8th conversion in regular sequence) */
+#define ADC_SQR2_SQ8_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR2_SQ8_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR2_SQ8_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR2_SQ8_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR2_SQ8_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR2_SQ9 ((uint32_t)0x00007C00) /*!<SQ9[4:0] bits (9th conversion in regular sequence) */
+#define ADC_SQR2_SQ9_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR2_SQ9_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR2_SQ9_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR2_SQ9_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR2_SQ9_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR2_SQ10 ((uint32_t)0x000F8000) /*!<SQ10[4:0] bits (10th conversion in regular sequence) */
+#define ADC_SQR2_SQ10_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR2_SQ10_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR2_SQ10_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR2_SQ10_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR2_SQ10_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR2_SQ11 ((uint32_t)0x01F00000) /*!<SQ11[4:0] bits (11th conversion in regular sequence) */
+#define ADC_SQR2_SQ11_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR2_SQ11_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR2_SQ11_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR2_SQ11_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+#define ADC_SQR2_SQ11_4 ((uint32_t)0x01000000) /*!<Bit 4 */
+#define ADC_SQR2_SQ12 ((uint32_t)0x3E000000) /*!<SQ12[4:0] bits (12th conversion in regular sequence) */
+#define ADC_SQR2_SQ12_0 ((uint32_t)0x02000000) /*!<Bit 0 */
+#define ADC_SQR2_SQ12_1 ((uint32_t)0x04000000) /*!<Bit 1 */
+#define ADC_SQR2_SQ12_2 ((uint32_t)0x08000000) /*!<Bit 2 */
+#define ADC_SQR2_SQ12_3 ((uint32_t)0x10000000) /*!<Bit 3 */
+#define ADC_SQR2_SQ12_4 ((uint32_t)0x20000000) /*!<Bit 4 */
+
+/******************* Bit definition for ADC_SQR3 register *******************/
+#define ADC_SQR3_SQ1 ((uint32_t)0x0000001F) /*!<SQ1[4:0] bits (1st conversion in regular sequence) */
+#define ADC_SQR3_SQ1_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR3_SQ1_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR3_SQ1_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR3_SQ1_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR3_SQ1_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR3_SQ2 ((uint32_t)0x000003E0) /*!<SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define ADC_SQR3_SQ2_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR3_SQ2_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR3_SQ2_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR3_SQ2_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR3_SQ2_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR3_SQ3 ((uint32_t)0x00007C00) /*!<SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define ADC_SQR3_SQ3_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR3_SQ3_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR3_SQ3_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR3_SQ3_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR3_SQ3_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR3_SQ4 ((uint32_t)0x000F8000) /*!<SQ4[4:0] bits (4th conversion in regular sequence) */
+#define ADC_SQR3_SQ4_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR3_SQ4_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR3_SQ4_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR3_SQ4_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR3_SQ4_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR3_SQ5 ((uint32_t)0x01F00000) /*!<SQ5[4:0] bits (5th conversion in regular sequence) */
+#define ADC_SQR3_SQ5_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR3_SQ5_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR3_SQ5_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR3_SQ5_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+#define ADC_SQR3_SQ5_4 ((uint32_t)0x01000000) /*!<Bit 4 */
+#define ADC_SQR3_SQ6 ((uint32_t)0x3E000000) /*!<SQ6[4:0] bits (6th conversion in regular sequence) */
+#define ADC_SQR3_SQ6_0 ((uint32_t)0x02000000) /*!<Bit 0 */
+#define ADC_SQR3_SQ6_1 ((uint32_t)0x04000000) /*!<Bit 1 */
+#define ADC_SQR3_SQ6_2 ((uint32_t)0x08000000) /*!<Bit 2 */
+#define ADC_SQR3_SQ6_3 ((uint32_t)0x10000000) /*!<Bit 3 */
+#define ADC_SQR3_SQ6_4 ((uint32_t)0x20000000) /*!<Bit 4 */
+
+/******************* Bit definition for ADC_JSQR register *******************/
+#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!<JSQ1[4:0] bits (1st conversion in injected sequence) */
+#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!<JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!<JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!<JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!<JL[1:0] bits (Injected Sequence length) */
+#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+
+/******************* Bit definition for ADC_JDR1 register *******************/
+#define ADC_JDR1_JDATA ((uint16_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR2 register *******************/
+#define ADC_JDR2_JDATA ((uint16_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR3 register *******************/
+#define ADC_JDR3_JDATA ((uint16_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR4 register *******************/
+#define ADC_JDR4_JDATA ((uint16_t)0xFFFF) /*!<Injected data */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!<Regular data */
+#define ADC_DR_ADC2DATA ((uint32_t)0xFFFF0000) /*!<ADC2 data */
+
+/******************* Bit definition for ADC_CSR register ********************/
+#define ADC_CSR_AWD1 ((uint32_t)0x00000001) /*!<ADC1 Analog watchdog flag */
+#define ADC_CSR_EOC1 ((uint32_t)0x00000002) /*!<ADC1 End of conversion */
+#define ADC_CSR_JEOC1 ((uint32_t)0x00000004) /*!<ADC1 Injected channel end of conversion */
+#define ADC_CSR_JSTRT1 ((uint32_t)0x00000008) /*!<ADC1 Injected channel Start flag */
+#define ADC_CSR_STRT1 ((uint32_t)0x00000010) /*!<ADC1 Regular channel Start flag */
+#define ADC_CSR_DOVR1 ((uint32_t)0x00000020) /*!<ADC1 DMA overrun flag */
+#define ADC_CSR_AWD2 ((uint32_t)0x00000100) /*!<ADC2 Analog watchdog flag */
+#define ADC_CSR_EOC2 ((uint32_t)0x00000200) /*!<ADC2 End of conversion */
+#define ADC_CSR_JEOC2 ((uint32_t)0x00000400) /*!<ADC2 Injected channel end of conversion */
+#define ADC_CSR_JSTRT2 ((uint32_t)0x00000800) /*!<ADC2 Injected channel Start flag */
+#define ADC_CSR_STRT2 ((uint32_t)0x00001000) /*!<ADC2 Regular channel Start flag */
+#define ADC_CSR_DOVR2 ((uint32_t)0x00002000) /*!<ADC2 DMA overrun flag */
+#define ADC_CSR_AWD3 ((uint32_t)0x00010000) /*!<ADC3 Analog watchdog flag */
+#define ADC_CSR_EOC3 ((uint32_t)0x00020000) /*!<ADC3 End of conversion */
+#define ADC_CSR_JEOC3 ((uint32_t)0x00040000) /*!<ADC3 Injected channel end of conversion */
+#define ADC_CSR_JSTRT3 ((uint32_t)0x00080000) /*!<ADC3 Injected channel Start flag */
+#define ADC_CSR_STRT3 ((uint32_t)0x00100000) /*!<ADC3 Regular channel Start flag */
+#define ADC_CSR_DOVR3 ((uint32_t)0x00200000) /*!<ADC3 DMA overrun flag */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_MULTI ((uint32_t)0x0000001F) /*!<MULTI[4:0] bits (Multi-ADC mode selection) */
+#define ADC_CCR_MULTI_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_CCR_MULTI_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_CCR_MULTI_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_CCR_MULTI_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_CCR_MULTI_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_CCR_DELAY ((uint32_t)0x00000F00) /*!<DELAY[3:0] bits (Delay between 2 sampling phases) */
+#define ADC_CCR_DELAY_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define ADC_CCR_DELAY_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define ADC_CCR_DELAY_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define ADC_CCR_DELAY_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define ADC_CCR_DDS ((uint32_t)0x00002000) /*!<DMA disable selection (Multi-ADC mode) */
+#define ADC_CCR_DMA ((uint32_t)0x0000C000) /*!<DMA[1:0] bits (Direct Memory Access mode for multimode) */
+#define ADC_CCR_DMA_0 ((uint32_t)0x00004000) /*!<Bit 0 */
+#define ADC_CCR_DMA_1 ((uint32_t)0x00008000) /*!<Bit 1 */
+#define ADC_CCR_ADCPRE ((uint32_t)0x00030000) /*!<ADCPRE[1:0] bits (ADC prescaler) */
+#define ADC_CCR_ADCPRE_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define ADC_CCR_ADCPRE_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define ADC_CCR_VBATE ((uint32_t)0x00400000) /*!<VBAT Enable */
+#define ADC_CCR_TSVREFE ((uint32_t)0x00800000) /*!<Temperature Sensor and VREFINT Enable */
+
+/******************* Bit definition for ADC_CDR register ********************/
+#define ADC_CDR_DATA1 ((uint32_t)0x0000FFFF) /*!<1st data of a pair of regular conversions */
+#define ADC_CDR_DATA2 ((uint32_t)0xFFFF0000) /*!<2nd data of a pair of regular conversions */
+
+/******************************************************************************/
+/* */
+/* Controller Area Network */
+/* */
+/******************************************************************************/
+/*!<CAN control and status registers */
+/******************* Bit definition for CAN_MCR register ********************/
+#define CAN_MCR_INRQ ((uint16_t)0x0001) /*!<Initialization Request */
+#define CAN_MCR_SLEEP ((uint16_t)0x0002) /*!<Sleep Mode Request */
+#define CAN_MCR_TXFP ((uint16_t)0x0004) /*!<Transmit FIFO Priority */
+#define CAN_MCR_RFLM ((uint16_t)0x0008) /*!<Receive FIFO Locked Mode */
+#define CAN_MCR_NART ((uint16_t)0x0010) /*!<No Automatic Retransmission */
+#define CAN_MCR_AWUM ((uint16_t)0x0020) /*!<Automatic Wakeup Mode */
+#define CAN_MCR_ABOM ((uint16_t)0x0040) /*!<Automatic Bus-Off Management */
+#define CAN_MCR_TTCM ((uint16_t)0x0080) /*!<Time Triggered Communication Mode */
+#define CAN_MCR_RESET ((uint16_t)0x8000) /*!<bxCAN software master reset */
+
+/******************* Bit definition for CAN_MSR register ********************/
+#define CAN_MSR_INAK ((uint16_t)0x0001) /*!<Initialization Acknowledge */
+#define CAN_MSR_SLAK ((uint16_t)0x0002) /*!<Sleep Acknowledge */
+#define CAN_MSR_ERRI ((uint16_t)0x0004) /*!<Error Interrupt */
+#define CAN_MSR_WKUI ((uint16_t)0x0008) /*!<Wakeup Interrupt */
+#define CAN_MSR_SLAKI ((uint16_t)0x0010) /*!<Sleep Acknowledge Interrupt */
+#define CAN_MSR_TXM ((uint16_t)0x0100) /*!<Transmit Mode */
+#define CAN_MSR_RXM ((uint16_t)0x0200) /*!<Receive Mode */
+#define CAN_MSR_SAMP ((uint16_t)0x0400) /*!<Last Sample Point */
+#define CAN_MSR_RX ((uint16_t)0x0800) /*!<CAN Rx Signal */
+
+/******************* Bit definition for CAN_TSR register ********************/
+#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!<Request Completed Mailbox0 */
+#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!<Transmission OK of Mailbox0 */
+#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!<Arbitration Lost for Mailbox0 */
+#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!<Transmission Error of Mailbox0 */
+#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!<Abort Request for Mailbox0 */
+#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!<Request Completed Mailbox1 */
+#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!<Transmission OK of Mailbox1 */
+#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!<Arbitration Lost for Mailbox1 */
+#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!<Transmission Error of Mailbox1 */
+#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!<Abort Request for Mailbox 1 */
+#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!<Request Completed Mailbox2 */
+#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!<Transmission OK of Mailbox 2 */
+#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!<Arbitration Lost for mailbox 2 */
+#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!<Transmission Error of Mailbox 2 */
+#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!<Abort Request for Mailbox 2 */
+#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!<Mailbox Code */
+
+#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!<TME[2:0] bits */
+#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!<Transmit Mailbox 0 Empty */
+#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!<Transmit Mailbox 1 Empty */
+#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!<Transmit Mailbox 2 Empty */
+
+#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!<LOW[2:0] bits */
+#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!<Lowest Priority Flag for Mailbox 0 */
+#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!<Lowest Priority Flag for Mailbox 1 */
+#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!<Lowest Priority Flag for Mailbox 2 */
+
+/******************* Bit definition for CAN_RF0R register *******************/
+#define CAN_RF0R_FMP0 ((uint8_t)0x03) /*!<FIFO 0 Message Pending */
+#define CAN_RF0R_FULL0 ((uint8_t)0x08) /*!<FIFO 0 Full */
+#define CAN_RF0R_FOVR0 ((uint8_t)0x10) /*!<FIFO 0 Overrun */
+#define CAN_RF0R_RFOM0 ((uint8_t)0x20) /*!<Release FIFO 0 Output Mailbox */
+
+/******************* Bit definition for CAN_RF1R register *******************/
+#define CAN_RF1R_FMP1 ((uint8_t)0x03) /*!<FIFO 1 Message Pending */
+#define CAN_RF1R_FULL1 ((uint8_t)0x08) /*!<FIFO 1 Full */
+#define CAN_RF1R_FOVR1 ((uint8_t)0x10) /*!<FIFO 1 Overrun */
+#define CAN_RF1R_RFOM1 ((uint8_t)0x20) /*!<Release FIFO 1 Output Mailbox */
+
+/******************** Bit definition for CAN_IER register *******************/
+#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!<Transmit Mailbox Empty Interrupt Enable */
+#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!<Error Warning Interrupt Enable */
+#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!<Error Passive Interrupt Enable */
+#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!<Bus-Off Interrupt Enable */
+#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!<Last Error Code Interrupt Enable */
+#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!<Error Interrupt Enable */
+#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!<Wakeup Interrupt Enable */
+#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!<Sleep Interrupt Enable */
+
+/******************** Bit definition for CAN_ESR register *******************/
+#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!<Error Warning Flag */
+#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!<Error Passive Flag */
+#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!<Bus-Off Flag */
+
+#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!<LEC[2:0] bits (Last Error Code) */
+#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!<Receive Error Counter */
+
+/******************* Bit definition for CAN_BTR register ********************/
+#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!<Baud Rate Prescaler */
+#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!<Time Segment 1 */
+#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!<Time Segment 2 */
+#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!<Resynchronization Jump Width */
+#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!<Loop Back Mode (Debug) */
+#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!<Silent Mode */
+
+/*!<Mailbox registers */
+/****************** Bit definition for CAN_TI0R register ********************/
+#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/****************** Bit definition for CAN_TDT0R register *******************/
+#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/****************** Bit definition for CAN_TDL0R register *******************/
+#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/****************** Bit definition for CAN_TDH0R register *******************/
+#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI1R register *******************/
+#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT1R register ******************/
+#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL1R register ******************/
+#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH1R register ******************/
+#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI2R register *******************/
+#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT2R register ******************/
+#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL2R register ******************/
+#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH2R register ******************/
+#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI0R register *******************/
+#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT0R register ******************/
+#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL0R register ******************/
+#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH0R register ******************/
+#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI1R register *******************/
+#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT1R register ******************/
+#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL1R register ******************/
+#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH1R register ******************/
+#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/******************* Bit definition for CAN_FMR register ********************/
+#define CAN_FMR_FINIT ((uint8_t)0x01) /*!<Filter Init Mode */
+
+/******************* Bit definition for CAN_FM1R register *******************/
+#define CAN_FM1R_FBM ((uint16_t)0x3FFF) /*!<Filter Mode */
+#define CAN_FM1R_FBM0 ((uint16_t)0x0001) /*!<Filter Init Mode bit 0 */
+#define CAN_FM1R_FBM1 ((uint16_t)0x0002) /*!<Filter Init Mode bit 1 */
+#define CAN_FM1R_FBM2 ((uint16_t)0x0004) /*!<Filter Init Mode bit 2 */
+#define CAN_FM1R_FBM3 ((uint16_t)0x0008) /*!<Filter Init Mode bit 3 */
+#define CAN_FM1R_FBM4 ((uint16_t)0x0010) /*!<Filter Init Mode bit 4 */
+#define CAN_FM1R_FBM5 ((uint16_t)0x0020) /*!<Filter Init Mode bit 5 */
+#define CAN_FM1R_FBM6 ((uint16_t)0x0040) /*!<Filter Init Mode bit 6 */
+#define CAN_FM1R_FBM7 ((uint16_t)0x0080) /*!<Filter Init Mode bit 7 */
+#define CAN_FM1R_FBM8 ((uint16_t)0x0100) /*!<Filter Init Mode bit 8 */
+#define CAN_FM1R_FBM9 ((uint16_t)0x0200) /*!<Filter Init Mode bit 9 */
+#define CAN_FM1R_FBM10 ((uint16_t)0x0400) /*!<Filter Init Mode bit 10 */
+#define CAN_FM1R_FBM11 ((uint16_t)0x0800) /*!<Filter Init Mode bit 11 */
+#define CAN_FM1R_FBM12 ((uint16_t)0x1000) /*!<Filter Init Mode bit 12 */
+#define CAN_FM1R_FBM13 ((uint16_t)0x2000) /*!<Filter Init Mode bit 13 */
+
+/******************* Bit definition for CAN_FS1R register *******************/
+#define CAN_FS1R_FSC ((uint16_t)0x3FFF) /*!<Filter Scale Configuration */
+#define CAN_FS1R_FSC0 ((uint16_t)0x0001) /*!<Filter Scale Configuration bit 0 */
+#define CAN_FS1R_FSC1 ((uint16_t)0x0002) /*!<Filter Scale Configuration bit 1 */
+#define CAN_FS1R_FSC2 ((uint16_t)0x0004) /*!<Filter Scale Configuration bit 2 */
+#define CAN_FS1R_FSC3 ((uint16_t)0x0008) /*!<Filter Scale Configuration bit 3 */
+#define CAN_FS1R_FSC4 ((uint16_t)0x0010) /*!<Filter Scale Configuration bit 4 */
+#define CAN_FS1R_FSC5 ((uint16_t)0x0020) /*!<Filter Scale Configuration bit 5 */
+#define CAN_FS1R_FSC6 ((uint16_t)0x0040) /*!<Filter Scale Configuration bit 6 */
+#define CAN_FS1R_FSC7 ((uint16_t)0x0080) /*!<Filter Scale Configuration bit 7 */
+#define CAN_FS1R_FSC8 ((uint16_t)0x0100) /*!<Filter Scale Configuration bit 8 */
+#define CAN_FS1R_FSC9 ((uint16_t)0x0200) /*!<Filter Scale Configuration bit 9 */
+#define CAN_FS1R_FSC10 ((uint16_t)0x0400) /*!<Filter Scale Configuration bit 10 */
+#define CAN_FS1R_FSC11 ((uint16_t)0x0800) /*!<Filter Scale Configuration bit 11 */
+#define CAN_FS1R_FSC12 ((uint16_t)0x1000) /*!<Filter Scale Configuration bit 12 */
+#define CAN_FS1R_FSC13 ((uint16_t)0x2000) /*!<Filter Scale Configuration bit 13 */
+
+/****************** Bit definition for CAN_FFA1R register *******************/
+#define CAN_FFA1R_FFA ((uint16_t)0x3FFF) /*!<Filter FIFO Assignment */
+#define CAN_FFA1R_FFA0 ((uint16_t)0x0001) /*!<Filter FIFO Assignment for Filter 0 */
+#define CAN_FFA1R_FFA1 ((uint16_t)0x0002) /*!<Filter FIFO Assignment for Filter 1 */
+#define CAN_FFA1R_FFA2 ((uint16_t)0x0004) /*!<Filter FIFO Assignment for Filter 2 */
+#define CAN_FFA1R_FFA3 ((uint16_t)0x0008) /*!<Filter FIFO Assignment for Filter 3 */
+#define CAN_FFA1R_FFA4 ((uint16_t)0x0010) /*!<Filter FIFO Assignment for Filter 4 */
+#define CAN_FFA1R_FFA5 ((uint16_t)0x0020) /*!<Filter FIFO Assignment for Filter 5 */
+#define CAN_FFA1R_FFA6 ((uint16_t)0x0040) /*!<Filter FIFO Assignment for Filter 6 */
+#define CAN_FFA1R_FFA7 ((uint16_t)0x0080) /*!<Filter FIFO Assignment for Filter 7 */
+#define CAN_FFA1R_FFA8 ((uint16_t)0x0100) /*!<Filter FIFO Assignment for Filter 8 */
+#define CAN_FFA1R_FFA9 ((uint16_t)0x0200) /*!<Filter FIFO Assignment for Filter 9 */
+#define CAN_FFA1R_FFA10 ((uint16_t)0x0400) /*!<Filter FIFO Assignment for Filter 10 */
+#define CAN_FFA1R_FFA11 ((uint16_t)0x0800) /*!<Filter FIFO Assignment for Filter 11 */
+#define CAN_FFA1R_FFA12 ((uint16_t)0x1000) /*!<Filter FIFO Assignment for Filter 12 */
+#define CAN_FFA1R_FFA13 ((uint16_t)0x2000) /*!<Filter FIFO Assignment for Filter 13 */
+
+/******************* Bit definition for CAN_FA1R register *******************/
+#define CAN_FA1R_FACT ((uint16_t)0x3FFF) /*!<Filter Active */
+#define CAN_FA1R_FACT0 ((uint16_t)0x0001) /*!<Filter 0 Active */
+#define CAN_FA1R_FACT1 ((uint16_t)0x0002) /*!<Filter 1 Active */
+#define CAN_FA1R_FACT2 ((uint16_t)0x0004) /*!<Filter 2 Active */
+#define CAN_FA1R_FACT3 ((uint16_t)0x0008) /*!<Filter 3 Active */
+#define CAN_FA1R_FACT4 ((uint16_t)0x0010) /*!<Filter 4 Active */
+#define CAN_FA1R_FACT5 ((uint16_t)0x0020) /*!<Filter 5 Active */
+#define CAN_FA1R_FACT6 ((uint16_t)0x0040) /*!<Filter 6 Active */
+#define CAN_FA1R_FACT7 ((uint16_t)0x0080) /*!<Filter 7 Active */
+#define CAN_FA1R_FACT8 ((uint16_t)0x0100) /*!<Filter 8 Active */
+#define CAN_FA1R_FACT9 ((uint16_t)0x0200) /*!<Filter 9 Active */
+#define CAN_FA1R_FACT10 ((uint16_t)0x0400) /*!<Filter 10 Active */
+#define CAN_FA1R_FACT11 ((uint16_t)0x0800) /*!<Filter 11 Active */
+#define CAN_FA1R_FACT12 ((uint16_t)0x1000) /*!<Filter 12 Active */
+#define CAN_FA1R_FACT13 ((uint16_t)0x2000) /*!<Filter 13 Active */
+
+/******************* Bit definition for CAN_F0R1 register *******************/
+#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R1 register *******************/
+#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R1 register *******************/
+#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R1 register *******************/
+#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R1 register *******************/
+#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R1 register *******************/
+#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R1 register *******************/
+#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R1 register *******************/
+#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R1 register *******************/
+#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R1 register *******************/
+#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R1 register ******************/
+#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R1 register ******************/
+#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R1 register ******************/
+#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R1 register ******************/
+#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F0R2 register *******************/
+#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R2 register *******************/
+#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R2 register *******************/
+#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R2 register *******************/
+#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R2 register *******************/
+#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R2 register *******************/
+#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R2 register *******************/
+#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R2 register *******************/
+#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R2 register *******************/
+#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R2 register *******************/
+#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R2 register ******************/
+#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R2 register ******************/
+#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R2 register ******************/
+#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R2 register ******************/
+#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint8_t)0x01) /*!< RESET bit */
+
+/******************************************************************************/
+/* */
+/* Crypto Processor */
+/* */
+/******************************************************************************/
+/******************* Bits definition for CRYP_CR register ********************/
+#define CRYP_CR_ALGODIR ((uint32_t)0x00000004)
+
+#define CRYP_CR_ALGOMODE ((uint32_t)0x00000038)
+#define CRYP_CR_ALGOMODE_0 ((uint32_t)0x00000008)
+#define CRYP_CR_ALGOMODE_1 ((uint32_t)0x00000010)
+#define CRYP_CR_ALGOMODE_2 ((uint32_t)0x00000020)
+#define CRYP_CR_ALGOMODE_TDES_ECB ((uint32_t)0x00000000)
+#define CRYP_CR_ALGOMODE_TDES_CBC ((uint32_t)0x00000008)
+#define CRYP_CR_ALGOMODE_DES_ECB ((uint32_t)0x00000010)
+#define CRYP_CR_ALGOMODE_DES_CBC ((uint32_t)0x00000018)
+#define CRYP_CR_ALGOMODE_AES_ECB ((uint32_t)0x00000020)
+#define CRYP_CR_ALGOMODE_AES_CBC ((uint32_t)0x00000028)
+#define CRYP_CR_ALGOMODE_AES_CTR ((uint32_t)0x00000030)
+#define CRYP_CR_ALGOMODE_AES_KEY ((uint32_t)0x00000038)
+
+#define CRYP_CR_DATATYPE ((uint32_t)0x000000C0)
+#define CRYP_CR_DATATYPE_0 ((uint32_t)0x00000040)
+#define CRYP_CR_DATATYPE_1 ((uint32_t)0x00000080)
+#define CRYP_CR_KEYSIZE ((uint32_t)0x00000300)
+#define CRYP_CR_KEYSIZE_0 ((uint32_t)0x00000100)
+#define CRYP_CR_KEYSIZE_1 ((uint32_t)0x00000200)
+#define CRYP_CR_FFLUSH ((uint32_t)0x00004000)
+#define CRYP_CR_CRYPEN ((uint32_t)0x00008000)
+/****************** Bits definition for CRYP_SR register *********************/
+#define CRYP_SR_IFEM ((uint32_t)0x00000001)
+#define CRYP_SR_IFNF ((uint32_t)0x00000002)
+#define CRYP_SR_OFNE ((uint32_t)0x00000004)
+#define CRYP_SR_OFFU ((uint32_t)0x00000008)
+#define CRYP_SR_BUSY ((uint32_t)0x00000010)
+/****************** Bits definition for CRYP_DMACR register ******************/
+#define CRYP_DMACR_DIEN ((uint32_t)0x00000001)
+#define CRYP_DMACR_DOEN ((uint32_t)0x00000002)
+/***************** Bits definition for CRYP_IMSCR register ******************/
+#define CRYP_IMSCR_INIM ((uint32_t)0x00000001)
+#define CRYP_IMSCR_OUTIM ((uint32_t)0x00000002)
+/****************** Bits definition for CRYP_RISR register *******************/
+#define CRYP_RISR_OUTRIS ((uint32_t)0x00000001)
+#define CRYP_RISR_INRIS ((uint32_t)0x00000002)
+/****************** Bits definition for CRYP_MISR register *******************/
+#define CRYP_MISR_INMIS ((uint32_t)0x00000001)
+#define CRYP_MISR_OUTMIS ((uint32_t)0x00000002)
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!<DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!<DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!<DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!<TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+
+#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!<WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+
+#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!<MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!<DAC channel1 DMA enable */
+#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!<DAC channel2 enable */
+#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!<DAC channel2 output buffer disable */
+#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!<DAC channel2 Trigger enable */
+
+#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!<TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!<Bit 0 */
+#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!<Bit 1 */
+#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!<Bit 2 */
+
+#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!<WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!<Bit 0 */
+#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!<Bit 1 */
+
+#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!<MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!<DAC channel2 DMA enabled */
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint8_t)0x01) /*!<DAC channel1 software trigger */
+#define DAC_SWTRIGR_SWTRIG2 ((uint8_t)0x02) /*!<DAC channel2 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint16_t)0x0FFF) /*!<DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint16_t)0xFFF0) /*!<DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint8_t)0xFF) /*!<DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12R2 register ******************/
+#define DAC_DHR12R2_DACC2DHR ((uint16_t)0x0FFF) /*!<DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L2 register ******************/
+#define DAC_DHR12L2_DACC2DHR ((uint16_t)0xFFF0) /*!<DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R2 register ******************/
+#define DAC_DHR8R2_DACC2DHR ((uint8_t)0xFF) /*!<DAC channel2 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!<DAC channel1 12-bit Right aligned data */
+#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!<DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!<DAC channel1 12-bit Left aligned data */
+#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!<DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint16_t)0x00FF) /*!<DAC channel1 8-bit Right aligned data */
+#define DAC_DHR8RD_DACC2DHR ((uint16_t)0xFF00) /*!<DAC channel2 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint16_t)0x0FFF) /*!<DAC channel1 data output */
+
+/******************* Bit definition for DAC_DOR2 register *******************/
+#define DAC_DOR2_DACC2DOR ((uint16_t)0x0FFF) /*!<DAC channel2 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!<DAC channel1 DMA underrun flag */
+#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!<DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/* */
+/* Debug MCU */
+/* */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* DCMI */
+/* */
+/******************************************************************************/
+/******************** Bits definition for DCMI_CR register ******************/
+#define DCMI_CR_CAPTURE ((uint32_t)0x00000001)
+#define DCMI_CR_CM ((uint32_t)0x00000002)
+#define DCMI_CR_CROP ((uint32_t)0x00000004)
+#define DCMI_CR_JPEG ((uint32_t)0x00000008)
+#define DCMI_CR_ESS ((uint32_t)0x00000010)
+#define DCMI_CR_PCKPOL ((uint32_t)0x00000020)
+#define DCMI_CR_HSPOL ((uint32_t)0x00000040)
+#define DCMI_CR_VSPOL ((uint32_t)0x00000080)
+#define DCMI_CR_FCRC_0 ((uint32_t)0x00000100)
+#define DCMI_CR_FCRC_1 ((uint32_t)0x00000200)
+#define DCMI_CR_EDM_0 ((uint32_t)0x00000400)
+#define DCMI_CR_EDM_1 ((uint32_t)0x00000800)
+#define DCMI_CR_CRE ((uint32_t)0x00001000)
+#define DCMI_CR_ENABLE ((uint32_t)0x00004000)
+
+/******************** Bits definition for DCMI_SR register ******************/
+#define DCMI_SR_HSYNC ((uint32_t)0x00000001)
+#define DCMI_SR_VSYNC ((uint32_t)0x00000002)
+#define DCMI_SR_FNE ((uint32_t)0x00000004)
+
+/******************** Bits definition for DCMI_RISR register ****************/
+#define DCMI_RISR_FRAME_RIS ((uint32_t)0x00000001)
+#define DCMI_RISR_OVF_RIS ((uint32_t)0x00000002)
+#define DCMI_RISR_ERR_RIS ((uint32_t)0x00000004)
+#define DCMI_RISR_VSYNC_RIS ((uint32_t)0x00000008)
+#define DCMI_RISR_LINE_RIS ((uint32_t)0x00000010)
+
+/******************** Bits definition for DCMI_IER register *****************/
+#define DCMI_IER_FRAME_IE ((uint32_t)0x00000001)
+#define DCMI_IER_OVF_IE ((uint32_t)0x00000002)
+#define DCMI_IER_ERR_IE ((uint32_t)0x00000004)
+#define DCMI_IER_VSYNC_IE ((uint32_t)0x00000008)
+#define DCMI_IER_LINE_IE ((uint32_t)0x00000010)
+
+/******************** Bits definition for DCMI_MISR register ****************/
+#define DCMI_MISR_FRAME_MIS ((uint32_t)0x00000001)
+#define DCMI_MISR_OVF_MIS ((uint32_t)0x00000002)
+#define DCMI_MISR_ERR_MIS ((uint32_t)0x00000004)
+#define DCMI_MISR_VSYNC_MIS ((uint32_t)0x00000008)
+#define DCMI_MISR_LINE_MIS ((uint32_t)0x00000010)
+
+/******************** Bits definition for DCMI_ICR register *****************/
+#define DCMI_ICR_FRAME_ISC ((uint32_t)0x00000001)
+#define DCMI_ICR_OVF_ISC ((uint32_t)0x00000002)
+#define DCMI_ICR_ERR_ISC ((uint32_t)0x00000004)
+#define DCMI_ICR_VSYNC_ISC ((uint32_t)0x00000008)
+#define DCMI_ICR_LINE_ISC ((uint32_t)0x00000010)
+
+/******************************************************************************/
+/* */
+/* DMA Controller */
+/* */
+/******************************************************************************/
+/******************** Bits definition for DMA_SxCR register *****************/
+#define DMA_SxCR_CHSEL ((uint32_t)0x0E000000)
+#define DMA_SxCR_CHSEL_0 ((uint32_t)0x02000000)
+#define DMA_SxCR_CHSEL_1 ((uint32_t)0x04000000)
+#define DMA_SxCR_CHSEL_2 ((uint32_t)0x08000000)
+#define DMA_SxCR_MBURST ((uint32_t)0x01800000)
+#define DMA_SxCR_MBURST_0 ((uint32_t)0x00800000)
+#define DMA_SxCR_MBURST_1 ((uint32_t)0x01000000)
+#define DMA_SxCR_PBURST ((uint32_t)0x00600000)
+#define DMA_SxCR_PBURST_0 ((uint32_t)0x00200000)
+#define DMA_SxCR_PBURST_1 ((uint32_t)0x00400000)
+#define DMA_SxCR_ACK ((uint32_t)0x00100000)
+#define DMA_SxCR_CT ((uint32_t)0x00080000)
+#define DMA_SxCR_DBM ((uint32_t)0x00040000)
+#define DMA_SxCR_PL ((uint32_t)0x00030000)
+#define DMA_SxCR_PL_0 ((uint32_t)0x00010000)
+#define DMA_SxCR_PL_1 ((uint32_t)0x00020000)
+#define DMA_SxCR_PINCOS ((uint32_t)0x00008000)
+#define DMA_SxCR_MSIZE ((uint32_t)0x00006000)
+#define DMA_SxCR_MSIZE_0 ((uint32_t)0x00002000)
+#define DMA_SxCR_MSIZE_1 ((uint32_t)0x00004000)
+#define DMA_SxCR_PSIZE ((uint32_t)0x00001800)
+#define DMA_SxCR_PSIZE_0 ((uint32_t)0x00000800)
+#define DMA_SxCR_PSIZE_1 ((uint32_t)0x00001000)
+#define DMA_SxCR_MINC ((uint32_t)0x00000400)
+#define DMA_SxCR_PINC ((uint32_t)0x00000200)
+#define DMA_SxCR_CIRC ((uint32_t)0x00000100)
+#define DMA_SxCR_DIR ((uint32_t)0x000000C0)
+#define DMA_SxCR_DIR_0 ((uint32_t)0x00000040)
+#define DMA_SxCR_DIR_1 ((uint32_t)0x00000080)
+#define DMA_SxCR_PFCTRL ((uint32_t)0x00000020)
+#define DMA_SxCR_TCIE ((uint32_t)0x00000010)
+#define DMA_SxCR_HTIE ((uint32_t)0x00000008)
+#define DMA_SxCR_TEIE ((uint32_t)0x00000004)
+#define DMA_SxCR_DMEIE ((uint32_t)0x00000002)
+#define DMA_SxCR_EN ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_SxCNDTR register **************/
+#define DMA_SxNDT ((uint32_t)0x0000FFFF)
+#define DMA_SxNDT_0 ((uint32_t)0x00000001)
+#define DMA_SxNDT_1 ((uint32_t)0x00000002)
+#define DMA_SxNDT_2 ((uint32_t)0x00000004)
+#define DMA_SxNDT_3 ((uint32_t)0x00000008)
+#define DMA_SxNDT_4 ((uint32_t)0x00000010)
+#define DMA_SxNDT_5 ((uint32_t)0x00000020)
+#define DMA_SxNDT_6 ((uint32_t)0x00000040)
+#define DMA_SxNDT_7 ((uint32_t)0x00000080)
+#define DMA_SxNDT_8 ((uint32_t)0x00000100)
+#define DMA_SxNDT_9 ((uint32_t)0x00000200)
+#define DMA_SxNDT_10 ((uint32_t)0x00000400)
+#define DMA_SxNDT_11 ((uint32_t)0x00000800)
+#define DMA_SxNDT_12 ((uint32_t)0x00001000)
+#define DMA_SxNDT_13 ((uint32_t)0x00002000)
+#define DMA_SxNDT_14 ((uint32_t)0x00004000)
+#define DMA_SxNDT_15 ((uint32_t)0x00008000)
+
+/******************** Bits definition for DMA_SxFCR register ****************/
+#define DMA_SxFCR_FEIE ((uint32_t)0x00000080)
+#define DMA_SxFCR_FS ((uint32_t)0x00000038)
+#define DMA_SxFCR_FS_0 ((uint32_t)0x00000008)
+#define DMA_SxFCR_FS_1 ((uint32_t)0x00000010)
+#define DMA_SxFCR_FS_2 ((uint32_t)0x00000020)
+#define DMA_SxFCR_DMDIS ((uint32_t)0x00000004)
+#define DMA_SxFCR_FTH ((uint32_t)0x00000003)
+#define DMA_SxFCR_FTH_0 ((uint32_t)0x00000001)
+#define DMA_SxFCR_FTH_1 ((uint32_t)0x00000002)
+
+/******************** Bits definition for DMA_LISR register *****************/
+#define DMA_LISR_TCIF3 ((uint32_t)0x08000000)
+#define DMA_LISR_HTIF3 ((uint32_t)0x04000000)
+#define DMA_LISR_TEIF3 ((uint32_t)0x02000000)
+#define DMA_LISR_DMEIF3 ((uint32_t)0x01000000)
+#define DMA_LISR_FEIF3 ((uint32_t)0x00400000)
+#define DMA_LISR_TCIF2 ((uint32_t)0x00200000)
+#define DMA_LISR_HTIF2 ((uint32_t)0x00100000)
+#define DMA_LISR_TEIF2 ((uint32_t)0x00080000)
+#define DMA_LISR_DMEIF2 ((uint32_t)0x00040000)
+#define DMA_LISR_FEIF2 ((uint32_t)0x00010000)
+#define DMA_LISR_TCIF1 ((uint32_t)0x00000800)
+#define DMA_LISR_HTIF1 ((uint32_t)0x00000400)
+#define DMA_LISR_TEIF1 ((uint32_t)0x00000200)
+#define DMA_LISR_DMEIF1 ((uint32_t)0x00000100)
+#define DMA_LISR_FEIF1 ((uint32_t)0x00000040)
+#define DMA_LISR_TCIF0 ((uint32_t)0x00000020)
+#define DMA_LISR_HTIF0 ((uint32_t)0x00000010)
+#define DMA_LISR_TEIF0 ((uint32_t)0x00000008)
+#define DMA_LISR_DMEIF0 ((uint32_t)0x00000004)
+#define DMA_LISR_FEIF0 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_HISR register *****************/
+#define DMA_HISR_TCIF7 ((uint32_t)0x08000000)
+#define DMA_HISR_HTIF7 ((uint32_t)0x04000000)
+#define DMA_HISR_TEIF7 ((uint32_t)0x02000000)
+#define DMA_HISR_DMEIF7 ((uint32_t)0x01000000)
+#define DMA_HISR_FEIF7 ((uint32_t)0x00400000)
+#define DMA_HISR_TCIF6 ((uint32_t)0x00200000)
+#define DMA_HISR_HTIF6 ((uint32_t)0x00100000)
+#define DMA_HISR_TEIF6 ((uint32_t)0x00080000)
+#define DMA_HISR_DMEIF6 ((uint32_t)0x00040000)
+#define DMA_HISR_FEIF6 ((uint32_t)0x00010000)
+#define DMA_HISR_TCIF5 ((uint32_t)0x00000800)
+#define DMA_HISR_HTIF5 ((uint32_t)0x00000400)
+#define DMA_HISR_TEIF5 ((uint32_t)0x00000200)
+#define DMA_HISR_DMEIF5 ((uint32_t)0x00000100)
+#define DMA_HISR_FEIF5 ((uint32_t)0x00000040)
+#define DMA_HISR_TCIF4 ((uint32_t)0x00000020)
+#define DMA_HISR_HTIF4 ((uint32_t)0x00000010)
+#define DMA_HISR_TEIF4 ((uint32_t)0x00000008)
+#define DMA_HISR_DMEIF4 ((uint32_t)0x00000004)
+#define DMA_HISR_FEIF4 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_LIFCR register ****************/
+#define DMA_LIFCR_CTCIF3 ((uint32_t)0x08000000)
+#define DMA_LIFCR_CHTIF3 ((uint32_t)0x04000000)
+#define DMA_LIFCR_CTEIF3 ((uint32_t)0x02000000)
+#define DMA_LIFCR_CDMEIF3 ((uint32_t)0x01000000)
+#define DMA_LIFCR_CFEIF3 ((uint32_t)0x00400000)
+#define DMA_LIFCR_CTCIF2 ((uint32_t)0x00200000)
+#define DMA_LIFCR_CHTIF2 ((uint32_t)0x00100000)
+#define DMA_LIFCR_CTEIF2 ((uint32_t)0x00080000)
+#define DMA_LIFCR_CDMEIF2 ((uint32_t)0x00040000)
+#define DMA_LIFCR_CFEIF2 ((uint32_t)0x00010000)
+#define DMA_LIFCR_CTCIF1 ((uint32_t)0x00000800)
+#define DMA_LIFCR_CHTIF1 ((uint32_t)0x00000400)
+#define DMA_LIFCR_CTEIF1 ((uint32_t)0x00000200)
+#define DMA_LIFCR_CDMEIF1 ((uint32_t)0x00000100)
+#define DMA_LIFCR_CFEIF1 ((uint32_t)0x00000040)
+#define DMA_LIFCR_CTCIF0 ((uint32_t)0x00000020)
+#define DMA_LIFCR_CHTIF0 ((uint32_t)0x00000010)
+#define DMA_LIFCR_CTEIF0 ((uint32_t)0x00000008)
+#define DMA_LIFCR_CDMEIF0 ((uint32_t)0x00000004)
+#define DMA_LIFCR_CFEIF0 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_HIFCR register ****************/
+#define DMA_HIFCR_CTCIF7 ((uint32_t)0x08000000)
+#define DMA_HIFCR_CHTIF7 ((uint32_t)0x04000000)
+#define DMA_HIFCR_CTEIF7 ((uint32_t)0x02000000)
+#define DMA_HIFCR_CDMEIF7 ((uint32_t)0x01000000)
+#define DMA_HIFCR_CFEIF7 ((uint32_t)0x00400000)
+#define DMA_HIFCR_CTCIF6 ((uint32_t)0x00200000)
+#define DMA_HIFCR_CHTIF6 ((uint32_t)0x00100000)
+#define DMA_HIFCR_CTEIF6 ((uint32_t)0x00080000)
+#define DMA_HIFCR_CDMEIF6 ((uint32_t)0x00040000)
+#define DMA_HIFCR_CFEIF6 ((uint32_t)0x00010000)
+#define DMA_HIFCR_CTCIF5 ((uint32_t)0x00000800)
+#define DMA_HIFCR_CHTIF5 ((uint32_t)0x00000400)
+#define DMA_HIFCR_CTEIF5 ((uint32_t)0x00000200)
+#define DMA_HIFCR_CDMEIF5 ((uint32_t)0x00000100)
+#define DMA_HIFCR_CFEIF5 ((uint32_t)0x00000040)
+#define DMA_HIFCR_CTCIF4 ((uint32_t)0x00000020)
+#define DMA_HIFCR_CHTIF4 ((uint32_t)0x00000010)
+#define DMA_HIFCR_CTEIF4 ((uint32_t)0x00000008)
+#define DMA_HIFCR_CDMEIF4 ((uint32_t)0x00000004)
+#define DMA_HIFCR_CFEIF4 ((uint32_t)0x00000001)
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+
+/******************* Bit definition for EXTI_EMR register *******************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+
+/****************** Bit definition for EXTI_RTSR register *******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/****************** Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/****************** Bit definition for EXTI_SWIER register ******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/******************* Bit definition for EXTI_PR register ********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */
+#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH */
+/* */
+/******************************************************************************/
+/******************* Bits definition for FLASH_ACR register *****************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000007)
+#define FLASH_ACR_LATENCY_0WS ((uint32_t)0x00000000)
+#define FLASH_ACR_LATENCY_1WS ((uint32_t)0x00000001)
+#define FLASH_ACR_LATENCY_2WS ((uint32_t)0x00000002)
+#define FLASH_ACR_LATENCY_3WS ((uint32_t)0x00000003)
+#define FLASH_ACR_LATENCY_4WS ((uint32_t)0x00000004)
+#define FLASH_ACR_LATENCY_5WS ((uint32_t)0x00000005)
+#define FLASH_ACR_LATENCY_6WS ((uint32_t)0x00000006)
+#define FLASH_ACR_LATENCY_7WS ((uint32_t)0x00000007)
+
+#define FLASH_ACR_PRFTEN ((uint32_t)0x00000100)
+#define FLASH_ACR_ICEN ((uint32_t)0x00000200)
+#define FLASH_ACR_DCEN ((uint32_t)0x00000400)
+#define FLASH_ACR_ICRST ((uint32_t)0x00000800)
+#define FLASH_ACR_DCRST ((uint32_t)0x00001000)
+#define FLASH_ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
+#define FLASH_ACR_BYTE2_ADDRESS ((uint32_t)0x40023C03)
+
+/******************* Bits definition for FLASH_SR register ******************/
+#define FLASH_SR_EOP ((uint32_t)0x00000001)
+#define FLASH_SR_SOP ((uint32_t)0x00000002)
+#define FLASH_SR_WRPERR ((uint32_t)0x00000010)
+#define FLASH_SR_PGAERR ((uint32_t)0x00000020)
+#define FLASH_SR_PGPERR ((uint32_t)0x00000040)
+#define FLASH_SR_PGSERR ((uint32_t)0x00000080)
+#define FLASH_SR_BSY ((uint32_t)0x00010000)
+
+/******************* Bits definition for FLASH_CR register ******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001)
+#define FLASH_CR_SER ((uint32_t)0x00000002)
+#define FLASH_CR_MER ((uint32_t)0x00000004)
+#define FLASH_CR_SNB_0 ((uint32_t)0x00000008)
+#define FLASH_CR_SNB_1 ((uint32_t)0x00000010)
+#define FLASH_CR_SNB_2 ((uint32_t)0x00000020)
+#define FLASH_CR_SNB_3 ((uint32_t)0x00000040)
+#define FLASH_CR_PSIZE_0 ((uint32_t)0x00000100)
+#define FLASH_CR_PSIZE_1 ((uint32_t)0x00000200)
+#define FLASH_CR_STRT ((uint32_t)0x00010000)
+#define FLASH_CR_EOPIE ((uint32_t)0x01000000)
+#define FLASH_CR_LOCK ((uint32_t)0x80000000)
+
+/******************* Bits definition for FLASH_OPTCR register ***************/
+#define FLASH_OPTCR_OPTLOCK ((uint32_t)0x00000001)
+#define FLASH_OPTCR_OPTSTRT ((uint32_t)0x00000002)
+#define FLASH_OPTCR_BOR_LEV_0 ((uint32_t)0x00000004)
+#define FLASH_OPTCR_BOR_LEV_1 ((uint32_t)0x00000008)
+#define FLASH_OPTCR_BOR_LEV ((uint32_t)0x0000000C)
+#define FLASH_OPTCR_WDG_SW ((uint32_t)0x00000020)
+#define FLASH_OPTCR_nRST_STOP ((uint32_t)0x00000040)
+#define FLASH_OPTCR_nRST_STDBY ((uint32_t)0x00000080)
+#define FLASH_OPTCR_RDP_0 ((uint32_t)0x00000100)
+#define FLASH_OPTCR_RDP_1 ((uint32_t)0x00000200)
+#define FLASH_OPTCR_RDP_2 ((uint32_t)0x00000400)
+#define FLASH_OPTCR_RDP_3 ((uint32_t)0x00000800)
+#define FLASH_OPTCR_RDP_4 ((uint32_t)0x00001000)
+#define FLASH_OPTCR_RDP_5 ((uint32_t)0x00002000)
+#define FLASH_OPTCR_RDP_6 ((uint32_t)0x00004000)
+#define FLASH_OPTCR_RDP_7 ((uint32_t)0x00008000)
+#define FLASH_OPTCR_nWRP_0 ((uint32_t)0x00010000)
+#define FLASH_OPTCR_nWRP_1 ((uint32_t)0x00020000)
+#define FLASH_OPTCR_nWRP_2 ((uint32_t)0x00040000)
+#define FLASH_OPTCR_nWRP_3 ((uint32_t)0x00080000)
+#define FLASH_OPTCR_nWRP_4 ((uint32_t)0x00100000)
+#define FLASH_OPTCR_nWRP_5 ((uint32_t)0x00200000)
+#define FLASH_OPTCR_nWRP_6 ((uint32_t)0x00400000)
+#define FLASH_OPTCR_nWRP_7 ((uint32_t)0x00800000)
+#define FLASH_OPTCR_nWRP_8 ((uint32_t)0x01000000)
+#define FLASH_OPTCR_nWRP_9 ((uint32_t)0x02000000)
+#define FLASH_OPTCR_nWRP_10 ((uint32_t)0x04000000)
+#define FLASH_OPTCR_nWRP_11 ((uint32_t)0x08000000)
+
+/******************************************************************************/
+/* */
+/* Flexible Static Memory Controller */
+/* */
+/******************************************************************************/
+/****************** Bit definition for FSMC_BCR1 register *******************/
+#define FSMC_BCR1_MBKEN ((uint32_t)0x00000001) /*!<Memory bank enable bit */
+#define FSMC_BCR1_MUXEN ((uint32_t)0x00000002) /*!<Address/data multiplexing enable bit */
+
+#define FSMC_BCR1_MTYP ((uint32_t)0x0000000C) /*!<MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR1_MTYP_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FSMC_BCR1_MTYP_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FSMC_BCR1_MWID ((uint32_t)0x00000030) /*!<MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR1_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BCR1_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_BCR1_FACCEN ((uint32_t)0x00000040) /*!<Flash access enable */
+#define FSMC_BCR1_BURSTEN ((uint32_t)0x00000100) /*!<Burst enable bit */
+#define FSMC_BCR1_WAITPOL ((uint32_t)0x00000200) /*!<Wait signal polarity bit */
+#define FSMC_BCR1_WRAPMOD ((uint32_t)0x00000400) /*!<Wrapped burst mode support */
+#define FSMC_BCR1_WAITCFG ((uint32_t)0x00000800) /*!<Wait timing configuration */
+#define FSMC_BCR1_WREN ((uint32_t)0x00001000) /*!<Write enable bit */
+#define FSMC_BCR1_WAITEN ((uint32_t)0x00002000) /*!<Wait enable bit */
+#define FSMC_BCR1_EXTMOD ((uint32_t)0x00004000) /*!<Extended mode enable */
+#define FSMC_BCR1_ASYNCWAIT ((uint32_t)0x00008000) /*!<Asynchronous wait */
+#define FSMC_BCR1_CBURSTRW ((uint32_t)0x00080000) /*!<Write burst enable */
+
+/****************** Bit definition for FSMC_BCR2 register *******************/
+#define FSMC_BCR2_MBKEN ((uint32_t)0x00000001) /*!<Memory bank enable bit */
+#define FSMC_BCR2_MUXEN ((uint32_t)0x00000002) /*!<Address/data multiplexing enable bit */
+
+#define FSMC_BCR2_MTYP ((uint32_t)0x0000000C) /*!<MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR2_MTYP_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FSMC_BCR2_MTYP_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FSMC_BCR2_MWID ((uint32_t)0x00000030) /*!<MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR2_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BCR2_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_BCR2_FACCEN ((uint32_t)0x00000040) /*!<Flash access enable */
+#define FSMC_BCR2_BURSTEN ((uint32_t)0x00000100) /*!<Burst enable bit */
+#define FSMC_BCR2_WAITPOL ((uint32_t)0x00000200) /*!<Wait signal polarity bit */
+#define FSMC_BCR2_WRAPMOD ((uint32_t)0x00000400) /*!<Wrapped burst mode support */
+#define FSMC_BCR2_WAITCFG ((uint32_t)0x00000800) /*!<Wait timing configuration */
+#define FSMC_BCR2_WREN ((uint32_t)0x00001000) /*!<Write enable bit */
+#define FSMC_BCR2_WAITEN ((uint32_t)0x00002000) /*!<Wait enable bit */
+#define FSMC_BCR2_EXTMOD ((uint32_t)0x00004000) /*!<Extended mode enable */
+#define FSMC_BCR2_ASYNCWAIT ((uint32_t)0x00008000) /*!<Asynchronous wait */
+#define FSMC_BCR2_CBURSTRW ((uint32_t)0x00080000) /*!<Write burst enable */
+
+/****************** Bit definition for FSMC_BCR3 register *******************/
+#define FSMC_BCR3_MBKEN ((uint32_t)0x00000001) /*!<Memory bank enable bit */
+#define FSMC_BCR3_MUXEN ((uint32_t)0x00000002) /*!<Address/data multiplexing enable bit */
+
+#define FSMC_BCR3_MTYP ((uint32_t)0x0000000C) /*!<MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR3_MTYP_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FSMC_BCR3_MTYP_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FSMC_BCR3_MWID ((uint32_t)0x00000030) /*!<MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR3_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BCR3_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_BCR3_FACCEN ((uint32_t)0x00000040) /*!<Flash access enable */
+#define FSMC_BCR3_BURSTEN ((uint32_t)0x00000100) /*!<Burst enable bit */
+#define FSMC_BCR3_WAITPOL ((uint32_t)0x00000200) /*!<Wait signal polarity bit. */
+#define FSMC_BCR3_WRAPMOD ((uint32_t)0x00000400) /*!<Wrapped burst mode support */
+#define FSMC_BCR3_WAITCFG ((uint32_t)0x00000800) /*!<Wait timing configuration */
+#define FSMC_BCR3_WREN ((uint32_t)0x00001000) /*!<Write enable bit */
+#define FSMC_BCR3_WAITEN ((uint32_t)0x00002000) /*!<Wait enable bit */
+#define FSMC_BCR3_EXTMOD ((uint32_t)0x00004000) /*!<Extended mode enable */
+#define FSMC_BCR3_ASYNCWAIT ((uint32_t)0x00008000) /*!<Asynchronous wait */
+#define FSMC_BCR3_CBURSTRW ((uint32_t)0x00080000) /*!<Write burst enable */
+
+/****************** Bit definition for FSMC_BCR4 register *******************/
+#define FSMC_BCR4_MBKEN ((uint32_t)0x00000001) /*!<Memory bank enable bit */
+#define FSMC_BCR4_MUXEN ((uint32_t)0x00000002) /*!<Address/data multiplexing enable bit */
+
+#define FSMC_BCR4_MTYP ((uint32_t)0x0000000C) /*!<MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR4_MTYP_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FSMC_BCR4_MTYP_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FSMC_BCR4_MWID ((uint32_t)0x00000030) /*!<MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR4_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BCR4_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_BCR4_FACCEN ((uint32_t)0x00000040) /*!<Flash access enable */
+#define FSMC_BCR4_BURSTEN ((uint32_t)0x00000100) /*!<Burst enable bit */
+#define FSMC_BCR4_WAITPOL ((uint32_t)0x00000200) /*!<Wait signal polarity bit */
+#define FSMC_BCR4_WRAPMOD ((uint32_t)0x00000400) /*!<Wrapped burst mode support */
+#define FSMC_BCR4_WAITCFG ((uint32_t)0x00000800) /*!<Wait timing configuration */
+#define FSMC_BCR4_WREN ((uint32_t)0x00001000) /*!<Write enable bit */
+#define FSMC_BCR4_WAITEN ((uint32_t)0x00002000) /*!<Wait enable bit */
+#define FSMC_BCR4_EXTMOD ((uint32_t)0x00004000) /*!<Extended mode enable */
+#define FSMC_BCR4_ASYNCWAIT ((uint32_t)0x00008000) /*!<Asynchronous wait */
+#define FSMC_BCR4_CBURSTRW ((uint32_t)0x00080000) /*!<Write burst enable */
+
+/****************** Bit definition for FSMC_BTR1 register ******************/
+#define FSMC_BTR1_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR1_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BTR1_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BTR1_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BTR1_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BTR1_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BTR1_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR1_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BTR1_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BTR1_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BTR1_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BTR1_BUSTURN ((uint32_t)0x000F0000) /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR1_BUSTURN_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_BTR1_BUSTURN_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_BTR1_BUSTURN_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_BTR1_BUSTURN_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+
+#define FSMC_BTR1_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BTR1_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR1_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BTR1_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BTR1_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BTR1_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BTR1_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_BTR2 register *******************/
+#define FSMC_BTR2_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR2_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BTR2_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BTR2_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BTR2_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BTR2_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BTR2_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR2_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BTR2_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BTR2_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BTR2_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BTR2_BUSTURN ((uint32_t)0x000F0000) /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR2_BUSTURN_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_BTR2_BUSTURN_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_BTR2_BUSTURN_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_BTR2_BUSTURN_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+
+#define FSMC_BTR2_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BTR2_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR2_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BTR2_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BTR2_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BTR2_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BTR2_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/******************* Bit definition for FSMC_BTR3 register *******************/
+#define FSMC_BTR3_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR3_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BTR3_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BTR3_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BTR3_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BTR3_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BTR3_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR3_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BTR3_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BTR3_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BTR3_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BTR3_BUSTURN ((uint32_t)0x000F0000) /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR3_BUSTURN_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_BTR3_BUSTURN_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_BTR3_BUSTURN_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_BTR3_BUSTURN_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+
+#define FSMC_BTR3_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BTR3_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR3_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BTR3_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BTR3_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BTR3_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BTR3_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_BTR4 register *******************/
+#define FSMC_BTR4_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR4_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BTR4_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BTR4_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BTR4_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BTR4_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BTR4_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR4_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BTR4_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BTR4_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BTR4_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BTR4_BUSTURN ((uint32_t)0x000F0000) /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR4_BUSTURN_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_BTR4_BUSTURN_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_BTR4_BUSTURN_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_BTR4_BUSTURN_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+
+#define FSMC_BTR4_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BTR4_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR4_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BTR4_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BTR4_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BTR4_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BTR4_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR1 register ******************/
+#define FSMC_BWTR1_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR1_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BWTR1_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BWTR1_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BWTR1_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BWTR1_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BWTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BWTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BWTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BWTR1_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR1_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BWTR1_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BWTR1_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BWTR1_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BWTR1_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BWTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BWTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BWTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BWTR1_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR1_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BWTR1_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BWTR1_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BWTR1_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BWTR1_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BWTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR2 register ******************/
+#define FSMC_BWTR2_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR2_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BWTR2_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BWTR2_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BWTR2_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BWTR2_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BWTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BWTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BWTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BWTR2_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR2_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BWTR2_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BWTR2_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BWTR2_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BWTR2_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BWTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1*/
+#define FSMC_BWTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BWTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BWTR2_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR2_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BWTR2_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BWTR2_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BWTR2_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BWTR2_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BWTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR3 register ******************/
+#define FSMC_BWTR3_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR3_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BWTR3_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BWTR3_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BWTR3_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BWTR3_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BWTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BWTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BWTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BWTR3_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR3_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BWTR3_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BWTR3_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BWTR3_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BWTR3_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BWTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BWTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BWTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BWTR3_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR3_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BWTR3_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BWTR3_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BWTR3_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BWTR3_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BWTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR4 register ******************/
+#define FSMC_BWTR4_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR4_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_BWTR4_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_BWTR4_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_BWTR4_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FSMC_BWTR4_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_BWTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FSMC_BWTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FSMC_BWTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FSMC_BWTR4_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR4_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_BWTR4_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_BWTR4_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_BWTR4_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FSMC_BWTR4_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FSMC_BWTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FSMC_BWTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FSMC_BWTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FSMC_BWTR4_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR4_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_BWTR4_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_BWTR4_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_BWTR4_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FSMC_BWTR4_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FSMC_BWTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FSMC_PCR2 register *******************/
+#define FSMC_PCR2_PWAITEN ((uint32_t)0x00000002) /*!<Wait feature enable bit */
+#define FSMC_PCR2_PBKEN ((uint32_t)0x00000004) /*!<PC Card/NAND Flash memory bank enable bit */
+#define FSMC_PCR2_PTYP ((uint32_t)0x00000008) /*!<Memory type */
+
+#define FSMC_PCR2_PWID ((uint32_t)0x00000030) /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define FSMC_PCR2_PWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_PCR2_PWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_PCR2_ECCEN ((uint32_t)0x00000040) /*!<ECC computation logic enable bit */
+
+#define FSMC_PCR2_TCLR ((uint32_t)0x00001E00) /*!<TCLR[3:0] bits (CLE to RE delay) */
+#define FSMC_PCR2_TCLR_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define FSMC_PCR2_TCLR_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define FSMC_PCR2_TCLR_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define FSMC_PCR2_TCLR_3 ((uint32_t)0x00001000) /*!<Bit 3 */
+
+#define FSMC_PCR2_TAR ((uint32_t)0x0001E000) /*!<TAR[3:0] bits (ALE to RE delay) */
+#define FSMC_PCR2_TAR_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define FSMC_PCR2_TAR_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define FSMC_PCR2_TAR_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define FSMC_PCR2_TAR_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define FSMC_PCR2_ECCPS ((uint32_t)0x000E0000) /*!<ECCPS[1:0] bits (ECC page size) */
+#define FSMC_PCR2_ECCPS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define FSMC_PCR2_ECCPS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define FSMC_PCR2_ECCPS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+
+/****************** Bit definition for FSMC_PCR3 register *******************/
+#define FSMC_PCR3_PWAITEN ((uint32_t)0x00000002) /*!<Wait feature enable bit */
+#define FSMC_PCR3_PBKEN ((uint32_t)0x00000004) /*!<PC Card/NAND Flash memory bank enable bit */
+#define FSMC_PCR3_PTYP ((uint32_t)0x00000008) /*!<Memory type */
+
+#define FSMC_PCR3_PWID ((uint32_t)0x00000030) /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define FSMC_PCR3_PWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_PCR3_PWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_PCR3_ECCEN ((uint32_t)0x00000040) /*!<ECC computation logic enable bit */
+
+#define FSMC_PCR3_TCLR ((uint32_t)0x00001E00) /*!<TCLR[3:0] bits (CLE to RE delay) */
+#define FSMC_PCR3_TCLR_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define FSMC_PCR3_TCLR_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define FSMC_PCR3_TCLR_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define FSMC_PCR3_TCLR_3 ((uint32_t)0x00001000) /*!<Bit 3 */
+
+#define FSMC_PCR3_TAR ((uint32_t)0x0001E000) /*!<TAR[3:0] bits (ALE to RE delay) */
+#define FSMC_PCR3_TAR_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define FSMC_PCR3_TAR_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define FSMC_PCR3_TAR_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define FSMC_PCR3_TAR_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define FSMC_PCR3_ECCPS ((uint32_t)0x000E0000) /*!<ECCPS[2:0] bits (ECC page size) */
+#define FSMC_PCR3_ECCPS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define FSMC_PCR3_ECCPS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define FSMC_PCR3_ECCPS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+
+/****************** Bit definition for FSMC_PCR4 register *******************/
+#define FSMC_PCR4_PWAITEN ((uint32_t)0x00000002) /*!<Wait feature enable bit */
+#define FSMC_PCR4_PBKEN ((uint32_t)0x00000004) /*!<PC Card/NAND Flash memory bank enable bit */
+#define FSMC_PCR4_PTYP ((uint32_t)0x00000008) /*!<Memory type */
+
+#define FSMC_PCR4_PWID ((uint32_t)0x00000030) /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define FSMC_PCR4_PWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FSMC_PCR4_PWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FSMC_PCR4_ECCEN ((uint32_t)0x00000040) /*!<ECC computation logic enable bit */
+
+#define FSMC_PCR4_TCLR ((uint32_t)0x00001E00) /*!<TCLR[3:0] bits (CLE to RE delay) */
+#define FSMC_PCR4_TCLR_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define FSMC_PCR4_TCLR_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define FSMC_PCR4_TCLR_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define FSMC_PCR4_TCLR_3 ((uint32_t)0x00001000) /*!<Bit 3 */
+
+#define FSMC_PCR4_TAR ((uint32_t)0x0001E000) /*!<TAR[3:0] bits (ALE to RE delay) */
+#define FSMC_PCR4_TAR_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define FSMC_PCR4_TAR_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define FSMC_PCR4_TAR_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define FSMC_PCR4_TAR_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define FSMC_PCR4_ECCPS ((uint32_t)0x000E0000) /*!<ECCPS[2:0] bits (ECC page size) */
+#define FSMC_PCR4_ECCPS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define FSMC_PCR4_ECCPS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define FSMC_PCR4_ECCPS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+
+/******************* Bit definition for FSMC_SR2 register *******************/
+#define FSMC_SR2_IRS ((uint8_t)0x01) /*!<Interrupt Rising Edge status */
+#define FSMC_SR2_ILS ((uint8_t)0x02) /*!<Interrupt Level status */
+#define FSMC_SR2_IFS ((uint8_t)0x04) /*!<Interrupt Falling Edge status */
+#define FSMC_SR2_IREN ((uint8_t)0x08) /*!<Interrupt Rising Edge detection Enable bit */
+#define FSMC_SR2_ILEN ((uint8_t)0x10) /*!<Interrupt Level detection Enable bit */
+#define FSMC_SR2_IFEN ((uint8_t)0x20) /*!<Interrupt Falling Edge detection Enable bit */
+#define FSMC_SR2_FEMPT ((uint8_t)0x40) /*!<FIFO empty */
+
+/******************* Bit definition for FSMC_SR3 register *******************/
+#define FSMC_SR3_IRS ((uint8_t)0x01) /*!<Interrupt Rising Edge status */
+#define FSMC_SR3_ILS ((uint8_t)0x02) /*!<Interrupt Level status */
+#define FSMC_SR3_IFS ((uint8_t)0x04) /*!<Interrupt Falling Edge status */
+#define FSMC_SR3_IREN ((uint8_t)0x08) /*!<Interrupt Rising Edge detection Enable bit */
+#define FSMC_SR3_ILEN ((uint8_t)0x10) /*!<Interrupt Level detection Enable bit */
+#define FSMC_SR3_IFEN ((uint8_t)0x20) /*!<Interrupt Falling Edge detection Enable bit */
+#define FSMC_SR3_FEMPT ((uint8_t)0x40) /*!<FIFO empty */
+
+/******************* Bit definition for FSMC_SR4 register *******************/
+#define FSMC_SR4_IRS ((uint8_t)0x01) /*!<Interrupt Rising Edge status */
+#define FSMC_SR4_ILS ((uint8_t)0x02) /*!<Interrupt Level status */
+#define FSMC_SR4_IFS ((uint8_t)0x04) /*!<Interrupt Falling Edge status */
+#define FSMC_SR4_IREN ((uint8_t)0x08) /*!<Interrupt Rising Edge detection Enable bit */
+#define FSMC_SR4_ILEN ((uint8_t)0x10) /*!<Interrupt Level detection Enable bit */
+#define FSMC_SR4_IFEN ((uint8_t)0x20) /*!<Interrupt Falling Edge detection Enable bit */
+#define FSMC_SR4_FEMPT ((uint8_t)0x40) /*!<FIFO empty */
+
+/****************** Bit definition for FSMC_PMEM2 register ******************/
+#define FSMC_PMEM2_MEMSET2 ((uint32_t)0x000000FF) /*!<MEMSET2[7:0] bits (Common memory 2 setup time) */
+#define FSMC_PMEM2_MEMSET2_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PMEM2_MEMSET2_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PMEM2_MEMSET2_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PMEM2_MEMSET2_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PMEM2_MEMSET2_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PMEM2_MEMSET2_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PMEM2_MEMSET2_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PMEM2_MEMSET2_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PMEM2_MEMWAIT2 ((uint32_t)0x0000FF00) /*!<MEMWAIT2[7:0] bits (Common memory 2 wait time) */
+#define FSMC_PMEM2_MEMWAIT2_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PMEM2_MEMWAIT2_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PMEM2_MEMWAIT2_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PMEM2_MEMWAIT2_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PMEM2_MEMWAIT2_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PMEM2_MEMWAIT2_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PMEM2_MEMWAIT2_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PMEM2_MEMWAIT2_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PMEM2_MEMHOLD2 ((uint32_t)0x00FF0000) /*!<MEMHOLD2[7:0] bits (Common memory 2 hold time) */
+#define FSMC_PMEM2_MEMHOLD2_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PMEM2_MEMHOLD2_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PMEM2_MEMHOLD2_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PMEM2_MEMHOLD2_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PMEM2_MEMHOLD2_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PMEM2_MEMHOLD2_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PMEM2_MEMHOLD2_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PMEM2_MEMHOLD2_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PMEM2_MEMHIZ2 ((uint32_t)0xFF000000) /*!<MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */
+#define FSMC_PMEM2_MEMHIZ2_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PMEM2_MEMHIZ2_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PMEM2_MEMHIZ2_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PMEM2_MEMHIZ2_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PMEM2_MEMHIZ2_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PMEM2_MEMHIZ2_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PMEM2_MEMHIZ2_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PMEM2_MEMHIZ2_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_PMEM3 register ******************/
+#define FSMC_PMEM3_MEMSET3 ((uint32_t)0x000000FF) /*!<MEMSET3[7:0] bits (Common memory 3 setup time) */
+#define FSMC_PMEM3_MEMSET3_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PMEM3_MEMSET3_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PMEM3_MEMSET3_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PMEM3_MEMSET3_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PMEM3_MEMSET3_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PMEM3_MEMSET3_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PMEM3_MEMSET3_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PMEM3_MEMSET3_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PMEM3_MEMWAIT3 ((uint32_t)0x0000FF00) /*!<MEMWAIT3[7:0] bits (Common memory 3 wait time) */
+#define FSMC_PMEM3_MEMWAIT3_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PMEM3_MEMWAIT3_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PMEM3_MEMWAIT3_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PMEM3_MEMWAIT3_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PMEM3_MEMWAIT3_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PMEM3_MEMWAIT3_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PMEM3_MEMWAIT3_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PMEM3_MEMWAIT3_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PMEM3_MEMHOLD3 ((uint32_t)0x00FF0000) /*!<MEMHOLD3[7:0] bits (Common memory 3 hold time) */
+#define FSMC_PMEM3_MEMHOLD3_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PMEM3_MEMHOLD3_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PMEM3_MEMHOLD3_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PMEM3_MEMHOLD3_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PMEM3_MEMHOLD3_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PMEM3_MEMHOLD3_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PMEM3_MEMHOLD3_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PMEM3_MEMHOLD3_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PMEM3_MEMHIZ3 ((uint32_t)0xFF000000) /*!<MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */
+#define FSMC_PMEM3_MEMHIZ3_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PMEM3_MEMHIZ3_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PMEM3_MEMHIZ3_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PMEM3_MEMHIZ3_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PMEM3_MEMHIZ3_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PMEM3_MEMHIZ3_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PMEM3_MEMHIZ3_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PMEM3_MEMHIZ3_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_PMEM4 register ******************/
+#define FSMC_PMEM4_MEMSET4 ((uint32_t)0x000000FF) /*!<MEMSET4[7:0] bits (Common memory 4 setup time) */
+#define FSMC_PMEM4_MEMSET4_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PMEM4_MEMSET4_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PMEM4_MEMSET4_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PMEM4_MEMSET4_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PMEM4_MEMSET4_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PMEM4_MEMSET4_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PMEM4_MEMSET4_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PMEM4_MEMSET4_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PMEM4_MEMWAIT4 ((uint32_t)0x0000FF00) /*!<MEMWAIT4[7:0] bits (Common memory 4 wait time) */
+#define FSMC_PMEM4_MEMWAIT4_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PMEM4_MEMWAIT4_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PMEM4_MEMWAIT4_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PMEM4_MEMWAIT4_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PMEM4_MEMWAIT4_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PMEM4_MEMWAIT4_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PMEM4_MEMWAIT4_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PMEM4_MEMWAIT4_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PMEM4_MEMHOLD4 ((uint32_t)0x00FF0000) /*!<MEMHOLD4[7:0] bits (Common memory 4 hold time) */
+#define FSMC_PMEM4_MEMHOLD4_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PMEM4_MEMHOLD4_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PMEM4_MEMHOLD4_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PMEM4_MEMHOLD4_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PMEM4_MEMHOLD4_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PMEM4_MEMHOLD4_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PMEM4_MEMHOLD4_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PMEM4_MEMHOLD4_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PMEM4_MEMHIZ4 ((uint32_t)0xFF000000) /*!<MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */
+#define FSMC_PMEM4_MEMHIZ4_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PMEM4_MEMHIZ4_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PMEM4_MEMHIZ4_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PMEM4_MEMHIZ4_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PMEM4_MEMHIZ4_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PMEM4_MEMHIZ4_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PMEM4_MEMHIZ4_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PMEM4_MEMHIZ4_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_PATT2 register ******************/
+#define FSMC_PATT2_ATTSET2 ((uint32_t)0x000000FF) /*!<ATTSET2[7:0] bits (Attribute memory 2 setup time) */
+#define FSMC_PATT2_ATTSET2_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PATT2_ATTSET2_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PATT2_ATTSET2_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PATT2_ATTSET2_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PATT2_ATTSET2_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PATT2_ATTSET2_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PATT2_ATTSET2_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PATT2_ATTSET2_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PATT2_ATTWAIT2 ((uint32_t)0x0000FF00) /*!<ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */
+#define FSMC_PATT2_ATTWAIT2_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PATT2_ATTWAIT2_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PATT2_ATTWAIT2_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PATT2_ATTWAIT2_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PATT2_ATTWAIT2_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PATT2_ATTWAIT2_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PATT2_ATTWAIT2_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PATT2_ATTWAIT2_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PATT2_ATTHOLD2 ((uint32_t)0x00FF0000) /*!<ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */
+#define FSMC_PATT2_ATTHOLD2_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PATT2_ATTHOLD2_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PATT2_ATTHOLD2_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PATT2_ATTHOLD2_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PATT2_ATTHOLD2_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PATT2_ATTHOLD2_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PATT2_ATTHOLD2_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PATT2_ATTHOLD2_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PATT2_ATTHIZ2 ((uint32_t)0xFF000000) /*!<ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */
+#define FSMC_PATT2_ATTHIZ2_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PATT2_ATTHIZ2_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PATT2_ATTHIZ2_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PATT2_ATTHIZ2_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PATT2_ATTHIZ2_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PATT2_ATTHIZ2_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PATT2_ATTHIZ2_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PATT2_ATTHIZ2_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_PATT3 register ******************/
+#define FSMC_PATT3_ATTSET3 ((uint32_t)0x000000FF) /*!<ATTSET3[7:0] bits (Attribute memory 3 setup time) */
+#define FSMC_PATT3_ATTSET3_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PATT3_ATTSET3_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PATT3_ATTSET3_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PATT3_ATTSET3_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PATT3_ATTSET3_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PATT3_ATTSET3_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PATT3_ATTSET3_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PATT3_ATTSET3_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PATT3_ATTWAIT3 ((uint32_t)0x0000FF00) /*!<ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */
+#define FSMC_PATT3_ATTWAIT3_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PATT3_ATTWAIT3_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PATT3_ATTWAIT3_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PATT3_ATTWAIT3_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PATT3_ATTWAIT3_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PATT3_ATTWAIT3_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PATT3_ATTWAIT3_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PATT3_ATTWAIT3_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PATT3_ATTHOLD3 ((uint32_t)0x00FF0000) /*!<ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */
+#define FSMC_PATT3_ATTHOLD3_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PATT3_ATTHOLD3_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PATT3_ATTHOLD3_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PATT3_ATTHOLD3_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PATT3_ATTHOLD3_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PATT3_ATTHOLD3_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PATT3_ATTHOLD3_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PATT3_ATTHOLD3_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PATT3_ATTHIZ3 ((uint32_t)0xFF000000) /*!<ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */
+#define FSMC_PATT3_ATTHIZ3_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PATT3_ATTHIZ3_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PATT3_ATTHIZ3_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PATT3_ATTHIZ3_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PATT3_ATTHIZ3_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PATT3_ATTHIZ3_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PATT3_ATTHIZ3_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PATT3_ATTHIZ3_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_PATT4 register ******************/
+#define FSMC_PATT4_ATTSET4 ((uint32_t)0x000000FF) /*!<ATTSET4[7:0] bits (Attribute memory 4 setup time) */
+#define FSMC_PATT4_ATTSET4_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PATT4_ATTSET4_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PATT4_ATTSET4_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PATT4_ATTSET4_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PATT4_ATTSET4_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PATT4_ATTSET4_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PATT4_ATTSET4_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PATT4_ATTSET4_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PATT4_ATTWAIT4 ((uint32_t)0x0000FF00) /*!<ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */
+#define FSMC_PATT4_ATTWAIT4_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PATT4_ATTWAIT4_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PATT4_ATTWAIT4_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PATT4_ATTWAIT4_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PATT4_ATTWAIT4_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PATT4_ATTWAIT4_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PATT4_ATTWAIT4_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PATT4_ATTWAIT4_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PATT4_ATTHOLD4 ((uint32_t)0x00FF0000) /*!<ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */
+#define FSMC_PATT4_ATTHOLD4_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PATT4_ATTHOLD4_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PATT4_ATTHOLD4_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PATT4_ATTHOLD4_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PATT4_ATTHOLD4_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PATT4_ATTHOLD4_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PATT4_ATTHOLD4_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PATT4_ATTHOLD4_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PATT4_ATTHIZ4 ((uint32_t)0xFF000000) /*!<ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */
+#define FSMC_PATT4_ATTHIZ4_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PATT4_ATTHIZ4_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PATT4_ATTHIZ4_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PATT4_ATTHIZ4_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PATT4_ATTHIZ4_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PATT4_ATTHIZ4_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PATT4_ATTHIZ4_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PATT4_ATTHIZ4_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_PIO4 register *******************/
+#define FSMC_PIO4_IOSET4 ((uint32_t)0x000000FF) /*!<IOSET4[7:0] bits (I/O 4 setup time) */
+#define FSMC_PIO4_IOSET4_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FSMC_PIO4_IOSET4_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FSMC_PIO4_IOSET4_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FSMC_PIO4_IOSET4_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FSMC_PIO4_IOSET4_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FSMC_PIO4_IOSET4_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FSMC_PIO4_IOSET4_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FSMC_PIO4_IOSET4_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FSMC_PIO4_IOWAIT4 ((uint32_t)0x0000FF00) /*!<IOWAIT4[7:0] bits (I/O 4 wait time) */
+#define FSMC_PIO4_IOWAIT4_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FSMC_PIO4_IOWAIT4_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FSMC_PIO4_IOWAIT4_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FSMC_PIO4_IOWAIT4_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FSMC_PIO4_IOWAIT4_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FSMC_PIO4_IOWAIT4_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FSMC_PIO4_IOWAIT4_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FSMC_PIO4_IOWAIT4_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FSMC_PIO4_IOHOLD4 ((uint32_t)0x00FF0000) /*!<IOHOLD4[7:0] bits (I/O 4 hold time) */
+#define FSMC_PIO4_IOHOLD4_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FSMC_PIO4_IOHOLD4_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FSMC_PIO4_IOHOLD4_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FSMC_PIO4_IOHOLD4_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FSMC_PIO4_IOHOLD4_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FSMC_PIO4_IOHOLD4_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FSMC_PIO4_IOHOLD4_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FSMC_PIO4_IOHOLD4_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FSMC_PIO4_IOHIZ4 ((uint32_t)0xFF000000) /*!<IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */
+#define FSMC_PIO4_IOHIZ4_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FSMC_PIO4_IOHIZ4_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FSMC_PIO4_IOHIZ4_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FSMC_PIO4_IOHIZ4_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FSMC_PIO4_IOHIZ4_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FSMC_PIO4_IOHIZ4_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FSMC_PIO4_IOHIZ4_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FSMC_PIO4_IOHIZ4_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FSMC_ECCR2 register ******************/
+#define FSMC_ECCR2_ECC2 ((uint32_t)0xFFFFFFFF) /*!<ECC result */
+
+/****************** Bit definition for FSMC_ECCR3 register ******************/
+#define FSMC_ECCR3_ECC3 ((uint32_t)0xFFFFFFFF) /*!<ECC result */
+
+/******************************************************************************/
+/* */
+/* General Purpose I/O */
+/* */
+/******************************************************************************/
+/****************** Bits definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_OTYPER register ****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/****************** Bits definition for GPIO_OSPEEDR register ***************/
+#define GPIO_OSPEEDER_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDER_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDER_OSPEEDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_OSPEEDER_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDER_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDER_OSPEEDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_OSPEEDER_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDER_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDER_OSPEEDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_OSPEEDER_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDER_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDER_OSPEEDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_OSPEEDER_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDER_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDER_OSPEEDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_OSPEEDER_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDER_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDER_OSPEEDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_OSPEEDER_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDER_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDER_OSPEEDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_OSPEEDER_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDER_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDER_OSPEEDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_OSPEEDER_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDER_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDER_OSPEEDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_OSPEEDER_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDER_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDER_OSPEEDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_OSPEEDER_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDER_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDER_OSPEEDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_OSPEEDER_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDER_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDER_OSPEEDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_OSPEEDER_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDER_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDER_OSPEEDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_OSPEEDER_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDER_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDER_OSPEEDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_OSPEEDER_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDER_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDER_OSPEEDR14_1 ((uint32_t)0x20000000)
+
+#define GPIO_OSPEEDER_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDER_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDER_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_PUPDR register *****************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_IDR register *******************/
+#define GPIO_IDR_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_IDR_15 ((uint32_t)0x00008000)
+/* Old GPIO_IDR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_IDR_0 GPIO_IDR_IDR_0
+#define GPIO_OTYPER_IDR_1 GPIO_IDR_IDR_1
+#define GPIO_OTYPER_IDR_2 GPIO_IDR_IDR_2
+#define GPIO_OTYPER_IDR_3 GPIO_IDR_IDR_3
+#define GPIO_OTYPER_IDR_4 GPIO_IDR_IDR_4
+#define GPIO_OTYPER_IDR_5 GPIO_IDR_IDR_5
+#define GPIO_OTYPER_IDR_6 GPIO_IDR_IDR_6
+#define GPIO_OTYPER_IDR_7 GPIO_IDR_IDR_7
+#define GPIO_OTYPER_IDR_8 GPIO_IDR_IDR_8
+#define GPIO_OTYPER_IDR_9 GPIO_IDR_IDR_9
+#define GPIO_OTYPER_IDR_10 GPIO_IDR_IDR_10
+#define GPIO_OTYPER_IDR_11 GPIO_IDR_IDR_11
+#define GPIO_OTYPER_IDR_12 GPIO_IDR_IDR_12
+#define GPIO_OTYPER_IDR_13 GPIO_IDR_IDR_13
+#define GPIO_OTYPER_IDR_14 GPIO_IDR_IDR_14
+#define GPIO_OTYPER_IDR_15 GPIO_IDR_IDR_15
+
+/****************** Bits definition for GPIO_ODR register *******************/
+#define GPIO_ODR_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_ODR_15 ((uint32_t)0x00008000)
+/* Old GPIO_ODR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_ODR_0 GPIO_ODR_ODR_0
+#define GPIO_OTYPER_ODR_1 GPIO_ODR_ODR_1
+#define GPIO_OTYPER_ODR_2 GPIO_ODR_ODR_2
+#define GPIO_OTYPER_ODR_3 GPIO_ODR_ODR_3
+#define GPIO_OTYPER_ODR_4 GPIO_ODR_ODR_4
+#define GPIO_OTYPER_ODR_5 GPIO_ODR_ODR_5
+#define GPIO_OTYPER_ODR_6 GPIO_ODR_ODR_6
+#define GPIO_OTYPER_ODR_7 GPIO_ODR_ODR_7
+#define GPIO_OTYPER_ODR_8 GPIO_ODR_ODR_8
+#define GPIO_OTYPER_ODR_9 GPIO_ODR_ODR_9
+#define GPIO_OTYPER_ODR_10 GPIO_ODR_ODR_10
+#define GPIO_OTYPER_ODR_11 GPIO_ODR_ODR_11
+#define GPIO_OTYPER_ODR_12 GPIO_ODR_ODR_12
+#define GPIO_OTYPER_ODR_13 GPIO_ODR_ODR_13
+#define GPIO_OTYPER_ODR_14 GPIO_ODR_ODR_14
+#define GPIO_OTYPER_ODR_15 GPIO_ODR_ODR_15
+
+/****************** Bits definition for GPIO_BSRR register ******************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/******************************************************************************/
+/* */
+/* HASH */
+/* */
+/******************************************************************************/
+/****************** Bits definition for HASH_CR register ********************/
+#define HASH_CR_INIT ((uint32_t)0x00000004)
+#define HASH_CR_DMAE ((uint32_t)0x00000008)
+#define HASH_CR_DATATYPE ((uint32_t)0x00000030)
+#define HASH_CR_DATATYPE_0 ((uint32_t)0x00000010)
+#define HASH_CR_DATATYPE_1 ((uint32_t)0x00000020)
+#define HASH_CR_MODE ((uint32_t)0x00000040)
+#define HASH_CR_ALGO ((uint32_t)0x00000080)
+#define HASH_CR_NBW ((uint32_t)0x00000F00)
+#define HASH_CR_NBW_0 ((uint32_t)0x00000100)
+#define HASH_CR_NBW_1 ((uint32_t)0x00000200)
+#define HASH_CR_NBW_2 ((uint32_t)0x00000400)
+#define HASH_CR_NBW_3 ((uint32_t)0x00000800)
+#define HASH_CR_DINNE ((uint32_t)0x00001000)
+#define HASH_CR_LKEY ((uint32_t)0x00010000)
+
+/****************** Bits definition for HASH_STR register *******************/
+#define HASH_STR_NBW ((uint32_t)0x0000001F)
+#define HASH_STR_NBW_0 ((uint32_t)0x00000001)
+#define HASH_STR_NBW_1 ((uint32_t)0x00000002)
+#define HASH_STR_NBW_2 ((uint32_t)0x00000004)
+#define HASH_STR_NBW_3 ((uint32_t)0x00000008)
+#define HASH_STR_NBW_4 ((uint32_t)0x00000010)
+#define HASH_STR_DCAL ((uint32_t)0x00000100)
+
+/****************** Bits definition for HASH_IMR register *******************/
+#define HASH_IMR_DINIM ((uint32_t)0x00000001)
+#define HASH_IMR_DCIM ((uint32_t)0x00000002)
+
+/****************** Bits definition for HASH_SR register ********************/
+#define HASH_SR_DINIS ((uint32_t)0x00000001)
+#define HASH_SR_DCIS ((uint32_t)0x00000002)
+#define HASH_SR_DMAS ((uint32_t)0x00000004)
+#define HASH_SR_BUSY ((uint32_t)0x00000008)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for I2C_CR1 register ********************/
+#define I2C_CR1_PE ((uint16_t)0x0001) /*!<Peripheral Enable */
+#define I2C_CR1_SMBUS ((uint16_t)0x0002) /*!<SMBus Mode */
+#define I2C_CR1_SMBTYPE ((uint16_t)0x0008) /*!<SMBus Type */
+#define I2C_CR1_ENARP ((uint16_t)0x0010) /*!<ARP Enable */
+#define I2C_CR1_ENPEC ((uint16_t)0x0020) /*!<PEC Enable */
+#define I2C_CR1_ENGC ((uint16_t)0x0040) /*!<General Call Enable */
+#define I2C_CR1_NOSTRETCH ((uint16_t)0x0080) /*!<Clock Stretching Disable (Slave mode) */
+#define I2C_CR1_START ((uint16_t)0x0100) /*!<Start Generation */
+#define I2C_CR1_STOP ((uint16_t)0x0200) /*!<Stop Generation */
+#define I2C_CR1_ACK ((uint16_t)0x0400) /*!<Acknowledge Enable */
+#define I2C_CR1_POS ((uint16_t)0x0800) /*!<Acknowledge/PEC Position (for data reception) */
+#define I2C_CR1_PEC ((uint16_t)0x1000) /*!<Packet Error Checking */
+#define I2C_CR1_ALERT ((uint16_t)0x2000) /*!<SMBus Alert */
+#define I2C_CR1_SWRST ((uint16_t)0x8000) /*!<Software Reset */
+
+/******************* Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_FREQ ((uint16_t)0x003F) /*!<FREQ[5:0] bits (Peripheral Clock Frequency) */
+#define I2C_CR2_FREQ_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define I2C_CR2_FREQ_1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define I2C_CR2_FREQ_2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define I2C_CR2_FREQ_3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define I2C_CR2_FREQ_4 ((uint16_t)0x0010) /*!<Bit 4 */
+#define I2C_CR2_FREQ_5 ((uint16_t)0x0020) /*!<Bit 5 */
+
+#define I2C_CR2_ITERREN ((uint16_t)0x0100) /*!<Error Interrupt Enable */
+#define I2C_CR2_ITEVTEN ((uint16_t)0x0200) /*!<Event Interrupt Enable */
+#define I2C_CR2_ITBUFEN ((uint16_t)0x0400) /*!<Buffer Interrupt Enable */
+#define I2C_CR2_DMAEN ((uint16_t)0x0800) /*!<DMA Requests Enable */
+#define I2C_CR2_LAST ((uint16_t)0x1000) /*!<DMA Last Transfer */
+
+/******************* Bit definition for I2C_OAR1 register *******************/
+#define I2C_OAR1_ADD1_7 ((uint16_t)0x00FE) /*!<Interface Address */
+#define I2C_OAR1_ADD8_9 ((uint16_t)0x0300) /*!<Interface Address */
+
+#define I2C_OAR1_ADD0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define I2C_OAR1_ADD1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define I2C_OAR1_ADD2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define I2C_OAR1_ADD3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define I2C_OAR1_ADD4 ((uint16_t)0x0010) /*!<Bit 4 */
+#define I2C_OAR1_ADD5 ((uint16_t)0x0020) /*!<Bit 5 */
+#define I2C_OAR1_ADD6 ((uint16_t)0x0040) /*!<Bit 6 */
+#define I2C_OAR1_ADD7 ((uint16_t)0x0080) /*!<Bit 7 */
+#define I2C_OAR1_ADD8 ((uint16_t)0x0100) /*!<Bit 8 */
+#define I2C_OAR1_ADD9 ((uint16_t)0x0200) /*!<Bit 9 */
+
+#define I2C_OAR1_ADDMODE ((uint16_t)0x8000) /*!<Addressing Mode (Slave mode) */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_ENDUAL ((uint8_t)0x01) /*!<Dual addressing mode enable */
+#define I2C_OAR2_ADD2 ((uint8_t)0xFE) /*!<Interface address */
+
+/******************** Bit definition for I2C_DR register ********************/
+#define I2C_DR_DR ((uint8_t)0xFF) /*!<8-bit Data Register */
+
+/******************* Bit definition for I2C_SR1 register ********************/
+#define I2C_SR1_SB ((uint16_t)0x0001) /*!<Start Bit (Master mode) */
+#define I2C_SR1_ADDR ((uint16_t)0x0002) /*!<Address sent (master mode)/matched (slave mode) */
+#define I2C_SR1_BTF ((uint16_t)0x0004) /*!<Byte Transfer Finished */
+#define I2C_SR1_ADD10 ((uint16_t)0x0008) /*!<10-bit header sent (Master mode) */
+#define I2C_SR1_STOPF ((uint16_t)0x0010) /*!<Stop detection (Slave mode) */
+#define I2C_SR1_RXNE ((uint16_t)0x0040) /*!<Data Register not Empty (receivers) */
+#define I2C_SR1_TXE ((uint16_t)0x0080) /*!<Data Register Empty (transmitters) */
+#define I2C_SR1_BERR ((uint16_t)0x0100) /*!<Bus Error */
+#define I2C_SR1_ARLO ((uint16_t)0x0200) /*!<Arbitration Lost (master mode) */
+#define I2C_SR1_AF ((uint16_t)0x0400) /*!<Acknowledge Failure */
+#define I2C_SR1_OVR ((uint16_t)0x0800) /*!<Overrun/Underrun */
+#define I2C_SR1_PECERR ((uint16_t)0x1000) /*!<PEC Error in reception */
+#define I2C_SR1_TIMEOUT ((uint16_t)0x4000) /*!<Timeout or Tlow Error */
+#define I2C_SR1_SMBALERT ((uint16_t)0x8000) /*!<SMBus Alert */
+
+/******************* Bit definition for I2C_SR2 register ********************/
+#define I2C_SR2_MSL ((uint16_t)0x0001) /*!<Master/Slave */
+#define I2C_SR2_BUSY ((uint16_t)0x0002) /*!<Bus Busy */
+#define I2C_SR2_TRA ((uint16_t)0x0004) /*!<Transmitter/Receiver */
+#define I2C_SR2_GENCALL ((uint16_t)0x0010) /*!<General Call Address (Slave mode) */
+#define I2C_SR2_SMBDEFAULT ((uint16_t)0x0020) /*!<SMBus Device Default Address (Slave mode) */
+#define I2C_SR2_SMBHOST ((uint16_t)0x0040) /*!<SMBus Host Header (Slave mode) */
+#define I2C_SR2_DUALF ((uint16_t)0x0080) /*!<Dual Flag (Slave mode) */
+#define I2C_SR2_PEC ((uint16_t)0xFF00) /*!<Packet Error Checking Register */
+
+/******************* Bit definition for I2C_CCR register ********************/
+#define I2C_CCR_CCR ((uint16_t)0x0FFF) /*!<Clock Control Register in Fast/Standard mode (Master mode) */
+#define I2C_CCR_DUTY ((uint16_t)0x4000) /*!<Fast Mode Duty Cycle */
+#define I2C_CCR_FS ((uint16_t)0x8000) /*!<I2C Master Mode Selection */
+
+/****************** Bit definition for I2C_TRISE register *******************/
+#define I2C_TRISE_TRISE ((uint8_t)0x3F) /*!<Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY ((uint16_t)0xFFFF) /*!<Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR ((uint8_t)0x07) /*!<PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint8_t)0x01) /*!<Bit 0 */
+#define IWDG_PR_PR_1 ((uint8_t)0x02) /*!<Bit 1 */
+#define IWDG_PR_PR_2 ((uint8_t)0x04) /*!<Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL ((uint16_t)0x0FFF) /*!<Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU ((uint8_t)0x01) /*!<Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint8_t)0x02) /*!<Watchdog counter reload value update */
+
+/******************************************************************************/
+/* */
+/* Power Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPDS ((uint16_t)0x0001) /*!< Low-Power Deepsleep */
+#define PWR_CR_PDDS ((uint16_t)0x0002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint16_t)0x0004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint16_t)0x0008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint16_t)0x0010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint16_t)0x00E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint16_t)0x0020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint16_t)0x0040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint16_t)0x0080) /*!< Bit 2 */
+
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint16_t)0x0000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint16_t)0x0020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint16_t)0x0040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint16_t)0x0060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint16_t)0x0080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint16_t)0x00A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint16_t)0x00C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint16_t)0x00E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint16_t)0x0100) /*!< Disable Backup Domain write protection */
+#define PWR_CR_FPDS ((uint16_t)0x0200) /*!< Flash power down in Stop mode */
+#define PWR_CR_VOS ((uint16_t)0x4000) /*!< Regulator voltage scaling output selection */
+/* Legacy define */
+#define PWR_CR_PMODE PWR_CR_VOS
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF ((uint16_t)0x0001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint16_t)0x0002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint16_t)0x0004) /*!< PVD Output */
+#define PWR_CSR_BRR ((uint16_t)0x0008) /*!< Backup regulator ready */
+#define PWR_CSR_EWUP ((uint16_t)0x0100) /*!< Enable WKUP pin */
+#define PWR_CSR_BRE ((uint16_t)0x0200) /*!< Backup regulator enable */
+#define PWR_CSR_VOSRDY ((uint16_t)0x4000) /*!< Regulator voltage scaling output selection ready */
+/* Legacy define */
+#define PWR_CSR_REGRDY PWR_CSR_VOSRDY
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION ((uint32_t)0x00000001)
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002)
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8)
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008)/*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010)/*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020)/*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040)/*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080)/*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00)
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100)/*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200)/*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400)/*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800)/*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000)/*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000)/*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000)/*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000)/*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000)
+#define RCC_CR_HSERDY ((uint32_t)0x00020000)
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000)
+#define RCC_CR_CSSON ((uint32_t)0x00080000)
+#define RCC_CR_PLLON ((uint32_t)0x01000000)
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000)
+#define RCC_CR_PLLI2SON ((uint32_t)0x04000000)
+#define RCC_CR_PLLI2SRDY ((uint32_t)0x08000000)
+
+/******************** Bit definition for RCC_PLLCFGR register ***************/
+#define RCC_PLLCFGR_PLLM ((uint32_t)0x0000003F)
+#define RCC_PLLCFGR_PLLM_0 ((uint32_t)0x00000001)
+#define RCC_PLLCFGR_PLLM_1 ((uint32_t)0x00000002)
+#define RCC_PLLCFGR_PLLM_2 ((uint32_t)0x00000004)
+#define RCC_PLLCFGR_PLLM_3 ((uint32_t)0x00000008)
+#define RCC_PLLCFGR_PLLM_4 ((uint32_t)0x00000010)
+#define RCC_PLLCFGR_PLLM_5 ((uint32_t)0x00000020)
+
+#define RCC_PLLCFGR_PLLN ((uint32_t)0x00007FC0)
+#define RCC_PLLCFGR_PLLN_0 ((uint32_t)0x00000040)
+#define RCC_PLLCFGR_PLLN_1 ((uint32_t)0x00000080)
+#define RCC_PLLCFGR_PLLN_2 ((uint32_t)0x00000100)
+#define RCC_PLLCFGR_PLLN_3 ((uint32_t)0x00000200)
+#define RCC_PLLCFGR_PLLN_4 ((uint32_t)0x00000400)
+#define RCC_PLLCFGR_PLLN_5 ((uint32_t)0x00000800)
+#define RCC_PLLCFGR_PLLN_6 ((uint32_t)0x00001000)
+#define RCC_PLLCFGR_PLLN_7 ((uint32_t)0x00002000)
+#define RCC_PLLCFGR_PLLN_8 ((uint32_t)0x00004000)
+
+#define RCC_PLLCFGR_PLLP ((uint32_t)0x00030000)
+#define RCC_PLLCFGR_PLLP_0 ((uint32_t)0x00010000)
+#define RCC_PLLCFGR_PLLP_1 ((uint32_t)0x00020000)
+
+#define RCC_PLLCFGR_PLLSRC ((uint32_t)0x00400000)
+#define RCC_PLLCFGR_PLLSRC_HSE ((uint32_t)0x00400000)
+#define RCC_PLLCFGR_PLLSRC_HSI ((uint32_t)0x00000000)
+
+#define RCC_PLLCFGR_PLLQ ((uint32_t)0x0F000000)
+#define RCC_PLLCFGR_PLLQ_0 ((uint32_t)0x01000000)
+#define RCC_PLLCFGR_PLLQ_1 ((uint32_t)0x02000000)
+#define RCC_PLLCFGR_PLLQ_2 ((uint32_t)0x04000000)
+#define RCC_PLLCFGR_PLLQ_3 ((uint32_t)0x08000000)
+
+/******************** Bit definition for RCC_CFGR register ******************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1 ((uint32_t)0x00001C00) /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00001000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00001400) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00001800) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00001C00) /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2 ((uint32_t)0x0000E000) /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00002000) /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00004000) /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00008000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00008000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x0000A000) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x0000C000) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x0000E000) /*!< HCLK divided by 16 */
+
+/*!< RTCPRE configuration */
+#define RCC_CFGR_RTCPRE ((uint32_t)0x001F0000)
+#define RCC_CFGR_RTCPRE_0 ((uint32_t)0x00010000)
+#define RCC_CFGR_RTCPRE_1 ((uint32_t)0x00020000)
+#define RCC_CFGR_RTCPRE_2 ((uint32_t)0x00040000)
+#define RCC_CFGR_RTCPRE_3 ((uint32_t)0x00080000)
+#define RCC_CFGR_RTCPRE_4 ((uint32_t)0x00100000)
+
+/*!< MCO1 configuration */
+#define RCC_CFGR_MCO1 ((uint32_t)0x00600000)
+#define RCC_CFGR_MCO1_0 ((uint32_t)0x00200000)
+#define RCC_CFGR_MCO1_1 ((uint32_t)0x00400000)
+
+#define RCC_CFGR_I2SSRC ((uint32_t)0x00800000)
+
+#define RCC_CFGR_MCO1PRE ((uint32_t)0x07000000)
+#define RCC_CFGR_MCO1PRE_0 ((uint32_t)0x01000000)
+#define RCC_CFGR_MCO1PRE_1 ((uint32_t)0x02000000)
+#define RCC_CFGR_MCO1PRE_2 ((uint32_t)0x04000000)
+
+#define RCC_CFGR_MCO2PRE ((uint32_t)0x38000000)
+#define RCC_CFGR_MCO2PRE_0 ((uint32_t)0x08000000)
+#define RCC_CFGR_MCO2PRE_1 ((uint32_t)0x10000000)
+#define RCC_CFGR_MCO2PRE_2 ((uint32_t)0x20000000)
+
+#define RCC_CFGR_MCO2 ((uint32_t)0xC0000000)
+#define RCC_CFGR_MCO2_0 ((uint32_t)0x40000000)
+#define RCC_CFGR_MCO2_1 ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_CIR register *******************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001)
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002)
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004)
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008)
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010)
+#define RCC_CIR_PLLI2SRDYF ((uint32_t)0x00000020)
+#define RCC_CIR_CSSF ((uint32_t)0x00000080)
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100)
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200)
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400)
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800)
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000)
+#define RCC_CIR_PLLI2SRDYIE ((uint32_t)0x00002000)
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000)
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000)
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000)
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000)
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000)
+#define RCC_CIR_PLLI2SRDYC ((uint32_t)0x00200000)
+#define RCC_CIR_CSSC ((uint32_t)0x00800000)
+
+/******************** Bit definition for RCC_AHB1RSTR register **************/
+#define RCC_AHB1RSTR_GPIOARST ((uint32_t)0x00000001)
+#define RCC_AHB1RSTR_GPIOBRST ((uint32_t)0x00000002)
+#define RCC_AHB1RSTR_GPIOCRST ((uint32_t)0x00000004)
+#define RCC_AHB1RSTR_GPIODRST ((uint32_t)0x00000008)
+#define RCC_AHB1RSTR_GPIOERST ((uint32_t)0x00000010)
+#define RCC_AHB1RSTR_GPIOFRST ((uint32_t)0x00000020)
+#define RCC_AHB1RSTR_GPIOGRST ((uint32_t)0x00000040)
+#define RCC_AHB1RSTR_GPIOHRST ((uint32_t)0x00000080)
+#define RCC_AHB1RSTR_GPIOIRST ((uint32_t)0x00000100)
+#define RCC_AHB1RSTR_CRCRST ((uint32_t)0x00001000)
+#define RCC_AHB1RSTR_DMA1RST ((uint32_t)0x00200000)
+#define RCC_AHB1RSTR_DMA2RST ((uint32_t)0x00400000)
+#define RCC_AHB1RSTR_ETHMACRST ((uint32_t)0x02000000)
+#define RCC_AHB1RSTR_OTGHRST ((uint32_t)0x10000000)
+
+/******************** Bit definition for RCC_AHB2RSTR register **************/
+#define RCC_AHB2RSTR_DCMIRST ((uint32_t)0x00000001)
+#define RCC_AHB2RSTR_CRYPRST ((uint32_t)0x00000010)
+#define RCC_AHB2RSTR_HSAHRST ((uint32_t)0x00000020)
+#define RCC_AHB2RSTR_RNGRST ((uint32_t)0x00000040)
+#define RCC_AHB2RSTR_OTGFSRST ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3RSTR register **************/
+#define RCC_AHB3RSTR_FSMCRST ((uint32_t)0x00000001)
+
+/******************** Bit definition for RCC_APB1RSTR register **************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001)
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002)
+#define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004)
+#define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008)
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010)
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020)
+#define RCC_APB1RSTR_TIM12RST ((uint32_t)0x00000040)
+#define RCC_APB1RSTR_TIM13RST ((uint32_t)0x00000080)
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100)
+#define RCC_APB1RSTR_WWDGEN ((uint32_t)0x00000800)
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00008000)
+#define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00010000)
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000)
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000)
+#define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000)
+#define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000)
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000)
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000)
+#define RCC_APB1RSTR_I2C3RST ((uint32_t)0x00800000)
+#define RCC_APB1RSTR_CAN1RST ((uint32_t)0x02000000)
+#define RCC_APB1RSTR_CAN2RST ((uint32_t)0x04000000)
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000)
+#define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000)
+
+/******************** Bit definition for RCC_APB2RSTR register **************/
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000001)
+#define RCC_APB2RSTR_TIM8RST ((uint32_t)0x00000002)
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00000010)
+#define RCC_APB2RSTR_USART6RST ((uint32_t)0x00000020)
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000100)
+#define RCC_APB2RSTR_SDIORST ((uint32_t)0x00000800)
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000)
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00004000)
+#define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00010000)
+#define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00020000)
+#define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00040000)
+/* Old SPI1RST bit definition, maintained for legacy purpose */
+#define RCC_APB2RSTR_SPI1 RCC_APB2RSTR_SPI1RST
+
+/******************** Bit definition for RCC_AHB1ENR register ***************/
+#define RCC_AHB1ENR_GPIOAEN ((uint32_t)0x00000001)
+#define RCC_AHB1ENR_GPIOBEN ((uint32_t)0x00000002)
+#define RCC_AHB1ENR_GPIOCEN ((uint32_t)0x00000004)
+#define RCC_AHB1ENR_GPIODEN ((uint32_t)0x00000008)
+#define RCC_AHB1ENR_GPIOEEN ((uint32_t)0x00000010)
+#define RCC_AHB1ENR_GPIOFEN ((uint32_t)0x00000020)
+#define RCC_AHB1ENR_GPIOGEN ((uint32_t)0x00000040)
+#define RCC_AHB1ENR_GPIOHEN ((uint32_t)0x00000080)
+#define RCC_AHB1ENR_GPIOIEN ((uint32_t)0x00000100)
+#define RCC_AHB1ENR_CRCEN ((uint32_t)0x00001000)
+#define RCC_AHB1ENR_BKPSRAMEN ((uint32_t)0x00040000)
+#define RCC_AHB1ENR_CCMDATARAMEN ((uint32_t)0x00100000)
+#define RCC_AHB1ENR_DMA1EN ((uint32_t)0x00200000)
+#define RCC_AHB1ENR_DMA2EN ((uint32_t)0x00400000)
+#define RCC_AHB1ENR_ETHMACEN ((uint32_t)0x02000000)
+#define RCC_AHB1ENR_ETHMACTXEN ((uint32_t)0x04000000)
+#define RCC_AHB1ENR_ETHMACRXEN ((uint32_t)0x08000000)
+#define RCC_AHB1ENR_ETHMACPTPEN ((uint32_t)0x10000000)
+#define RCC_AHB1ENR_OTGHSEN ((uint32_t)0x20000000)
+#define RCC_AHB1ENR_OTGHSULPIEN ((uint32_t)0x40000000)
+
+/******************** Bit definition for RCC_AHB2ENR register ***************/
+#define RCC_AHB2ENR_DCMIEN ((uint32_t)0x00000001)
+#define RCC_AHB2ENR_CRYPEN ((uint32_t)0x00000010)
+#define RCC_AHB2ENR_HASHEN ((uint32_t)0x00000020)
+#define RCC_AHB2ENR_RNGEN ((uint32_t)0x00000040)
+#define RCC_AHB2ENR_OTGFSEN ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3ENR register ***************/
+#define RCC_AHB3ENR_FSMCEN ((uint32_t)0x00000001)
+
+/******************** Bit definition for RCC_APB1ENR register ***************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001)
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002)
+#define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004)
+#define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008)
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010)
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020)
+#define RCC_APB1ENR_TIM12EN ((uint32_t)0x00000040)
+#define RCC_APB1ENR_TIM13EN ((uint32_t)0x00000080)
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100)
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800)
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000)
+#define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000)
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000)
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000)
+#define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000)
+#define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000)
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000)
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000)
+#define RCC_APB1ENR_I2C3EN ((uint32_t)0x00800000)
+#define RCC_APB1ENR_CAN1EN ((uint32_t)0x02000000)
+#define RCC_APB1ENR_CAN2EN ((uint32_t)0x04000000)
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000)
+#define RCC_APB1ENR_DACEN ((uint32_t)0x20000000)
+
+/******************** Bit definition for RCC_APB2ENR register ***************/
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000001)
+#define RCC_APB2ENR_TIM8EN ((uint32_t)0x00000002)
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00000010)
+#define RCC_APB2ENR_USART6EN ((uint32_t)0x00000020)
+#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000100)
+#define RCC_APB2ENR_ADC2EN ((uint32_t)0x00000200)
+#define RCC_APB2ENR_ADC3EN ((uint32_t)0x00000400)
+#define RCC_APB2ENR_SDIOEN ((uint32_t)0x00000800)
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000)
+#define RCC_APB2ENR_SYSCFGEN ((uint32_t)0x00004000)
+#define RCC_APB2ENR_TIM11EN ((uint32_t)0x00040000)
+#define RCC_APB2ENR_TIM10EN ((uint32_t)0x00020000)
+#define RCC_APB2ENR_TIM9EN ((uint32_t)0x00010000)
+
+/******************** Bit definition for RCC_AHB1LPENR register *************/
+#define RCC_AHB1LPENR_GPIOALPEN ((uint32_t)0x00000001)
+#define RCC_AHB1LPENR_GPIOBLPEN ((uint32_t)0x00000002)
+#define RCC_AHB1LPENR_GPIOCLPEN ((uint32_t)0x00000004)
+#define RCC_AHB1LPENR_GPIODLPEN ((uint32_t)0x00000008)
+#define RCC_AHB1LPENR_GPIOELPEN ((uint32_t)0x00000010)
+#define RCC_AHB1LPENR_GPIOFLPEN ((uint32_t)0x00000020)
+#define RCC_AHB1LPENR_GPIOGLPEN ((uint32_t)0x00000040)
+#define RCC_AHB1LPENR_GPIOHLPEN ((uint32_t)0x00000080)
+#define RCC_AHB1LPENR_GPIOILPEN ((uint32_t)0x00000100)
+#define RCC_AHB1LPENR_CRCLPEN ((uint32_t)0x00001000)
+#define RCC_AHB1LPENR_FLITFLPEN ((uint32_t)0x00008000)
+#define RCC_AHB1LPENR_SRAM1LPEN ((uint32_t)0x00010000)
+#define RCC_AHB1LPENR_SRAM2LPEN ((uint32_t)0x00020000)
+#define RCC_AHB1LPENR_BKPSRAMLPEN ((uint32_t)0x00040000)
+#define RCC_AHB1LPENR_DMA1LPEN ((uint32_t)0x00200000)
+#define RCC_AHB1LPENR_DMA2LPEN ((uint32_t)0x00400000)
+#define RCC_AHB1LPENR_ETHMACLPEN ((uint32_t)0x02000000)
+#define RCC_AHB1LPENR_ETHMACTXLPEN ((uint32_t)0x04000000)
+#define RCC_AHB1LPENR_ETHMACRXLPEN ((uint32_t)0x08000000)
+#define RCC_AHB1LPENR_ETHMACPTPLPEN ((uint32_t)0x10000000)
+#define RCC_AHB1LPENR_OTGHSLPEN ((uint32_t)0x20000000)
+#define RCC_AHB1LPENR_OTGHSULPILPEN ((uint32_t)0x40000000)
+
+/******************** Bit definition for RCC_AHB2LPENR register *************/
+#define RCC_AHB2LPENR_DCMILPEN ((uint32_t)0x00000001)
+#define RCC_AHB2LPENR_CRYPLPEN ((uint32_t)0x00000010)
+#define RCC_AHB2LPENR_HASHLPEN ((uint32_t)0x00000020)
+#define RCC_AHB2LPENR_RNGLPEN ((uint32_t)0x00000040)
+#define RCC_AHB2LPENR_OTGFSLPEN ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3LPENR register *************/
+#define RCC_AHB3LPENR_FSMCLPEN ((uint32_t)0x00000001)
+
+/******************** Bit definition for RCC_APB1LPENR register *************/
+#define RCC_APB1LPENR_TIM2LPEN ((uint32_t)0x00000001)
+#define RCC_APB1LPENR_TIM3LPEN ((uint32_t)0x00000002)
+#define RCC_APB1LPENR_TIM4LPEN ((uint32_t)0x00000004)
+#define RCC_APB1LPENR_TIM5LPEN ((uint32_t)0x00000008)
+#define RCC_APB1LPENR_TIM6LPEN ((uint32_t)0x00000010)
+#define RCC_APB1LPENR_TIM7LPEN ((uint32_t)0x00000020)
+#define RCC_APB1LPENR_TIM12LPEN ((uint32_t)0x00000040)
+#define RCC_APB1LPENR_TIM13LPEN ((uint32_t)0x00000080)
+#define RCC_APB1LPENR_TIM14LPEN ((uint32_t)0x00000100)
+#define RCC_APB1LPENR_WWDGLPEN ((uint32_t)0x00000800)
+#define RCC_APB1LPENR_SPI2LPEN ((uint32_t)0x00004000)
+#define RCC_APB1LPENR_SPI3LPEN ((uint32_t)0x00008000)
+#define RCC_APB1LPENR_USART2LPEN ((uint32_t)0x00020000)
+#define RCC_APB1LPENR_USART3LPEN ((uint32_t)0x00040000)
+#define RCC_APB1LPENR_UART4LPEN ((uint32_t)0x00080000)
+#define RCC_APB1LPENR_UART5LPEN ((uint32_t)0x00100000)
+#define RCC_APB1LPENR_I2C1LPEN ((uint32_t)0x00200000)
+#define RCC_APB1LPENR_I2C2LPEN ((uint32_t)0x00400000)
+#define RCC_APB1LPENR_I2C3LPEN ((uint32_t)0x00800000)
+#define RCC_APB1LPENR_CAN1LPEN ((uint32_t)0x02000000)
+#define RCC_APB1LPENR_CAN2LPEN ((uint32_t)0x04000000)
+#define RCC_APB1LPENR_PWRLPEN ((uint32_t)0x10000000)
+#define RCC_APB1LPENR_DACLPEN ((uint32_t)0x20000000)
+
+/******************** Bit definition for RCC_APB2LPENR register *************/
+#define RCC_APB2LPENR_TIM1LPEN ((uint32_t)0x00000001)
+#define RCC_APB2LPENR_TIM8LPEN ((uint32_t)0x00000002)
+#define RCC_APB2LPENR_USART1LPEN ((uint32_t)0x00000010)
+#define RCC_APB2LPENR_USART6LPEN ((uint32_t)0x00000020)
+#define RCC_APB2LPENR_ADC1LPEN ((uint32_t)0x00000100)
+#define RCC_APB2LPENR_ADC2PEN ((uint32_t)0x00000200)
+#define RCC_APB2LPENR_ADC3LPEN ((uint32_t)0x00000400)
+#define RCC_APB2LPENR_SDIOLPEN ((uint32_t)0x00000800)
+#define RCC_APB2LPENR_SPI1LPEN ((uint32_t)0x00001000)
+#define RCC_APB2LPENR_SYSCFGLPEN ((uint32_t)0x00004000)
+#define RCC_APB2LPENR_TIM9LPEN ((uint32_t)0x00010000)
+#define RCC_APB2LPENR_TIM10LPEN ((uint32_t)0x00020000)
+#define RCC_APB2LPENR_TIM11LPEN ((uint32_t)0x00040000)
+
+/******************** Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001)
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002)
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004)
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300)
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100)
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200)
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000)
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000)
+
+/******************** Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001)
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002)
+#define RCC_CSR_RMVF ((uint32_t)0x01000000)
+#define RCC_CSR_BORRSTF ((uint32_t)0x02000000)
+#define RCC_CSR_PADRSTF ((uint32_t)0x04000000)
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000)
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000)
+#define RCC_CSR_WDGRSTF ((uint32_t)0x20000000)
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000)
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_SSCGR register *****************/
+#define RCC_SSCGR_MODPER ((uint32_t)0x00001FFF)
+#define RCC_SSCGR_INCSTEP ((uint32_t)0x0FFFE000)
+#define RCC_SSCGR_SPREADSEL ((uint32_t)0x40000000)
+#define RCC_SSCGR_SSCGEN ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_PLLI2SCFGR register ************/
+#define RCC_PLLI2SCFGR_PLLI2SN ((uint32_t)0x00007FC0)
+#define RCC_PLLI2SCFGR_PLLI2SR ((uint32_t)0x70000000)
+
+/******************************************************************************/
+/* */
+/* RNG */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RNG_CR register *******************/
+#define RNG_CR_RNGEN ((uint32_t)0x00000004)
+#define RNG_CR_IE ((uint32_t)0x00000008)
+
+/******************** Bits definition for RNG_SR register *******************/
+#define RNG_SR_DRDY ((uint32_t)0x00000001)
+#define RNG_SR_CECS ((uint32_t)0x00000002)
+#define RNG_SR_SECS ((uint32_t)0x00000004)
+#define RNG_SR_CEIS ((uint32_t)0x00000020)
+#define RNG_SR_SEIS ((uint32_t)0x00000040)
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RTC_TR register *******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register *******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register *******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_WUTIE ((uint32_t)0x00004000)
+#define RTC_CR_ALRBIE ((uint32_t)0x00002000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRBE ((uint32_t)0x00000200)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_DCE ((uint32_t)0x00000080)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRBF ((uint32_t)0x00000200)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRBWF ((uint32_t)0x00000002)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register *****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00001FFF)
+
+/******************** Bits definition for RTC_WUTR register *****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALIBR register ***************/
+#define RTC_CALIBR_DCS ((uint32_t)0x00000080)
+#define RTC_CALIBR_DC ((uint32_t)0x0000001F)
+
+/******************** Bits definition for RTC_ALRMAR register ***************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ALRMBR register ***************/
+#define RTC_ALRMBR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMBR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMBR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMBR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMBR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMBR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMBR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMBR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMBR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMBR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMBR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMBR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMBR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMBR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMBR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMBR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMBR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMBR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMBR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMBR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMBR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMBR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMBR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMBR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMBR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMBR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMBR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMBR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMBR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMBR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMBR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMBR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMBR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMBR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMBR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMBR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register ******************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register ******************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register ***************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register *****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register *****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ****************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CAL register *****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ****************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TSINSEL ((uint32_t)0x00020000)
+#define RTC_TAFCR_TAMPINSEL ((uint32_t)0x00010000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register *************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMBSSR register *************/
+#define RTC_ALRMBSSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMBSSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBSSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBSSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBSSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBSSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ****************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ****************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ****************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ****************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ****************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP5R register ****************/
+#define RTC_BKP5R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP6R register ****************/
+#define RTC_BKP6R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP7R register ****************/
+#define RTC_BKP7R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP8R register ****************/
+#define RTC_BKP8R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP9R register ****************/
+#define RTC_BKP9R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP10R register ***************/
+#define RTC_BKP10R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP11R register ***************/
+#define RTC_BKP11R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP12R register ***************/
+#define RTC_BKP12R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP13R register ***************/
+#define RTC_BKP13R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP14R register ***************/
+#define RTC_BKP14R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP15R register ***************/
+#define RTC_BKP15R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP16R register ***************/
+#define RTC_BKP16R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP17R register ***************/
+#define RTC_BKP17R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP18R register ***************/
+#define RTC_BKP18R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP19R register ***************/
+#define RTC_BKP19R ((uint32_t)0xFFFFFFFF)
+
+/******************************************************************************/
+/* */
+/* SD host Interface */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SDIO_POWER register ******************/
+#define SDIO_POWER_PWRCTRL ((uint8_t)0x03) /*!<PWRCTRL[1:0] bits (Power supply control bits) */
+#define SDIO_POWER_PWRCTRL_0 ((uint8_t)0x01) /*!<Bit 0 */
+#define SDIO_POWER_PWRCTRL_1 ((uint8_t)0x02) /*!<Bit 1 */
+
+/****************** Bit definition for SDIO_CLKCR register ******************/
+#define SDIO_CLKCR_CLKDIV ((uint16_t)0x00FF) /*!<Clock divide factor */
+#define SDIO_CLKCR_CLKEN ((uint16_t)0x0100) /*!<Clock enable bit */
+#define SDIO_CLKCR_PWRSAV ((uint16_t)0x0200) /*!<Power saving configuration bit */
+#define SDIO_CLKCR_BYPASS ((uint16_t)0x0400) /*!<Clock divider bypass enable bit */
+
+#define SDIO_CLKCR_WIDBUS ((uint16_t)0x1800) /*!<WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define SDIO_CLKCR_WIDBUS_0 ((uint16_t)0x0800) /*!<Bit 0 */
+#define SDIO_CLKCR_WIDBUS_1 ((uint16_t)0x1000) /*!<Bit 1 */
+
+#define SDIO_CLKCR_NEGEDGE ((uint16_t)0x2000) /*!<SDIO_CK dephasing selection bit */
+#define SDIO_CLKCR_HWFC_EN ((uint16_t)0x4000) /*!<HW Flow Control enable */
+
+/******************* Bit definition for SDIO_ARG register *******************/
+#define SDIO_ARG_CMDARG ((uint32_t)0xFFFFFFFF) /*!<Command argument */
+
+/******************* Bit definition for SDIO_CMD register *******************/
+#define SDIO_CMD_CMDINDEX ((uint16_t)0x003F) /*!<Command Index */
+
+#define SDIO_CMD_WAITRESP ((uint16_t)0x00C0) /*!<WAITRESP[1:0] bits (Wait for response bits) */
+#define SDIO_CMD_WAITRESP_0 ((uint16_t)0x0040) /*!< Bit 0 */
+#define SDIO_CMD_WAITRESP_1 ((uint16_t)0x0080) /*!< Bit 1 */
+
+#define SDIO_CMD_WAITINT ((uint16_t)0x0100) /*!<CPSM Waits for Interrupt Request */
+#define SDIO_CMD_WAITPEND ((uint16_t)0x0200) /*!<CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define SDIO_CMD_CPSMEN ((uint16_t)0x0400) /*!<Command path state machine (CPSM) Enable bit */
+#define SDIO_CMD_SDIOSUSPEND ((uint16_t)0x0800) /*!<SD I/O suspend command */
+#define SDIO_CMD_ENCMDCOMPL ((uint16_t)0x1000) /*!<Enable CMD completion */
+#define SDIO_CMD_NIEN ((uint16_t)0x2000) /*!<Not Interrupt Enable */
+#define SDIO_CMD_CEATACMD ((uint16_t)0x4000) /*!<CE-ATA command */
+
+/***************** Bit definition for SDIO_RESPCMD register *****************/
+#define SDIO_RESPCMD_RESPCMD ((uint8_t)0x3F) /*!<Response command index */
+
+/****************** Bit definition for SDIO_RESP0 register ******************/
+#define SDIO_RESP0_CARDSTATUS0 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP1 register ******************/
+#define SDIO_RESP1_CARDSTATUS1 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP2 register ******************/
+#define SDIO_RESP2_CARDSTATUS2 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP3 register ******************/
+#define SDIO_RESP3_CARDSTATUS3 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP4 register ******************/
+#define SDIO_RESP4_CARDSTATUS4 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_DTIMER register *****************/
+#define SDIO_DTIMER_DATATIME ((uint32_t)0xFFFFFFFF) /*!<Data timeout period. */
+
+/****************** Bit definition for SDIO_DLEN register *******************/
+#define SDIO_DLEN_DATALENGTH ((uint32_t)0x01FFFFFF) /*!<Data length value */
+
+/****************** Bit definition for SDIO_DCTRL register ******************/
+#define SDIO_DCTRL_DTEN ((uint16_t)0x0001) /*!<Data transfer enabled bit */
+#define SDIO_DCTRL_DTDIR ((uint16_t)0x0002) /*!<Data transfer direction selection */
+#define SDIO_DCTRL_DTMODE ((uint16_t)0x0004) /*!<Data transfer mode selection */
+#define SDIO_DCTRL_DMAEN ((uint16_t)0x0008) /*!<DMA enabled bit */
+
+#define SDIO_DCTRL_DBLOCKSIZE ((uint16_t)0x00F0) /*!<DBLOCKSIZE[3:0] bits (Data block size) */
+#define SDIO_DCTRL_DBLOCKSIZE_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define SDIO_DCTRL_DBLOCKSIZE_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define SDIO_DCTRL_DBLOCKSIZE_2 ((uint16_t)0x0040) /*!<Bit 2 */
+#define SDIO_DCTRL_DBLOCKSIZE_3 ((uint16_t)0x0080) /*!<Bit 3 */
+
+#define SDIO_DCTRL_RWSTART ((uint16_t)0x0100) /*!<Read wait start */
+#define SDIO_DCTRL_RWSTOP ((uint16_t)0x0200) /*!<Read wait stop */
+#define SDIO_DCTRL_RWMOD ((uint16_t)0x0400) /*!<Read wait mode */
+#define SDIO_DCTRL_SDIOEN ((uint16_t)0x0800) /*!<SD I/O enable functions */
+
+/****************** Bit definition for SDIO_DCOUNT register *****************/
+#define SDIO_DCOUNT_DATACOUNT ((uint32_t)0x01FFFFFF) /*!<Data count value */
+
+/****************** Bit definition for SDIO_STA register ********************/
+#define SDIO_STA_CCRCFAIL ((uint32_t)0x00000001) /*!<Command response received (CRC check failed) */
+#define SDIO_STA_DCRCFAIL ((uint32_t)0x00000002) /*!<Data block sent/received (CRC check failed) */
+#define SDIO_STA_CTIMEOUT ((uint32_t)0x00000004) /*!<Command response timeout */
+#define SDIO_STA_DTIMEOUT ((uint32_t)0x00000008) /*!<Data timeout */
+#define SDIO_STA_TXUNDERR ((uint32_t)0x00000010) /*!<Transmit FIFO underrun error */
+#define SDIO_STA_RXOVERR ((uint32_t)0x00000020) /*!<Received FIFO overrun error */
+#define SDIO_STA_CMDREND ((uint32_t)0x00000040) /*!<Command response received (CRC check passed) */
+#define SDIO_STA_CMDSENT ((uint32_t)0x00000080) /*!<Command sent (no response required) */
+#define SDIO_STA_DATAEND ((uint32_t)0x00000100) /*!<Data end (data counter, SDIDCOUNT, is zero) */
+#define SDIO_STA_STBITERR ((uint32_t)0x00000200) /*!<Start bit not detected on all data signals in wide bus mode */
+#define SDIO_STA_DBCKEND ((uint32_t)0x00000400) /*!<Data block sent/received (CRC check passed) */
+#define SDIO_STA_CMDACT ((uint32_t)0x00000800) /*!<Command transfer in progress */
+#define SDIO_STA_TXACT ((uint32_t)0x00001000) /*!<Data transmit in progress */
+#define SDIO_STA_RXACT ((uint32_t)0x00002000) /*!<Data receive in progress */
+#define SDIO_STA_TXFIFOHE ((uint32_t)0x00004000) /*!<Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define SDIO_STA_RXFIFOHF ((uint32_t)0x00008000) /*!<Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define SDIO_STA_TXFIFOF ((uint32_t)0x00010000) /*!<Transmit FIFO full */
+#define SDIO_STA_RXFIFOF ((uint32_t)0x00020000) /*!<Receive FIFO full */
+#define SDIO_STA_TXFIFOE ((uint32_t)0x00040000) /*!<Transmit FIFO empty */
+#define SDIO_STA_RXFIFOE ((uint32_t)0x00080000) /*!<Receive FIFO empty */
+#define SDIO_STA_TXDAVL ((uint32_t)0x00100000) /*!<Data available in transmit FIFO */
+#define SDIO_STA_RXDAVL ((uint32_t)0x00200000) /*!<Data available in receive FIFO */
+#define SDIO_STA_SDIOIT ((uint32_t)0x00400000) /*!<SDIO interrupt received */
+#define SDIO_STA_CEATAEND ((uint32_t)0x00800000) /*!<CE-ATA command completion signal received for CMD61 */
+
+/******************* Bit definition for SDIO_ICR register *******************/
+#define SDIO_ICR_CCRCFAILC ((uint32_t)0x00000001) /*!<CCRCFAIL flag clear bit */
+#define SDIO_ICR_DCRCFAILC ((uint32_t)0x00000002) /*!<DCRCFAIL flag clear bit */
+#define SDIO_ICR_CTIMEOUTC ((uint32_t)0x00000004) /*!<CTIMEOUT flag clear bit */
+#define SDIO_ICR_DTIMEOUTC ((uint32_t)0x00000008) /*!<DTIMEOUT flag clear bit */
+#define SDIO_ICR_TXUNDERRC ((uint32_t)0x00000010) /*!<TXUNDERR flag clear bit */
+#define SDIO_ICR_RXOVERRC ((uint32_t)0x00000020) /*!<RXOVERR flag clear bit */
+#define SDIO_ICR_CMDRENDC ((uint32_t)0x00000040) /*!<CMDREND flag clear bit */
+#define SDIO_ICR_CMDSENTC ((uint32_t)0x00000080) /*!<CMDSENT flag clear bit */
+#define SDIO_ICR_DATAENDC ((uint32_t)0x00000100) /*!<DATAEND flag clear bit */
+#define SDIO_ICR_STBITERRC ((uint32_t)0x00000200) /*!<STBITERR flag clear bit */
+#define SDIO_ICR_DBCKENDC ((uint32_t)0x00000400) /*!<DBCKEND flag clear bit */
+#define SDIO_ICR_SDIOITC ((uint32_t)0x00400000) /*!<SDIOIT flag clear bit */
+#define SDIO_ICR_CEATAENDC ((uint32_t)0x00800000) /*!<CEATAEND flag clear bit */
+
+/****************** Bit definition for SDIO_MASK register *******************/
+#define SDIO_MASK_CCRCFAILIE ((uint32_t)0x00000001) /*!<Command CRC Fail Interrupt Enable */
+#define SDIO_MASK_DCRCFAILIE ((uint32_t)0x00000002) /*!<Data CRC Fail Interrupt Enable */
+#define SDIO_MASK_CTIMEOUTIE ((uint32_t)0x00000004) /*!<Command TimeOut Interrupt Enable */
+#define SDIO_MASK_DTIMEOUTIE ((uint32_t)0x00000008) /*!<Data TimeOut Interrupt Enable */
+#define SDIO_MASK_TXUNDERRIE ((uint32_t)0x00000010) /*!<Tx FIFO UnderRun Error Interrupt Enable */
+#define SDIO_MASK_RXOVERRIE ((uint32_t)0x00000020) /*!<Rx FIFO OverRun Error Interrupt Enable */
+#define SDIO_MASK_CMDRENDIE ((uint32_t)0x00000040) /*!<Command Response Received Interrupt Enable */
+#define SDIO_MASK_CMDSENTIE ((uint32_t)0x00000080) /*!<Command Sent Interrupt Enable */
+#define SDIO_MASK_DATAENDIE ((uint32_t)0x00000100) /*!<Data End Interrupt Enable */
+#define SDIO_MASK_STBITERRIE ((uint32_t)0x00000200) /*!<Start Bit Error Interrupt Enable */
+#define SDIO_MASK_DBCKENDIE ((uint32_t)0x00000400) /*!<Data Block End Interrupt Enable */
+#define SDIO_MASK_CMDACTIE ((uint32_t)0x00000800) /*!<CCommand Acting Interrupt Enable */
+#define SDIO_MASK_TXACTIE ((uint32_t)0x00001000) /*!<Data Transmit Acting Interrupt Enable */
+#define SDIO_MASK_RXACTIE ((uint32_t)0x00002000) /*!<Data receive acting interrupt enabled */
+#define SDIO_MASK_TXFIFOHEIE ((uint32_t)0x00004000) /*!<Tx FIFO Half Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOHFIE ((uint32_t)0x00008000) /*!<Rx FIFO Half Full interrupt Enable */
+#define SDIO_MASK_TXFIFOFIE ((uint32_t)0x00010000) /*!<Tx FIFO Full interrupt Enable */
+#define SDIO_MASK_RXFIFOFIE ((uint32_t)0x00020000) /*!<Rx FIFO Full interrupt Enable */
+#define SDIO_MASK_TXFIFOEIE ((uint32_t)0x00040000) /*!<Tx FIFO Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOEIE ((uint32_t)0x00080000) /*!<Rx FIFO Empty interrupt Enable */
+#define SDIO_MASK_TXDAVLIE ((uint32_t)0x00100000) /*!<Data available in Tx FIFO interrupt Enable */
+#define SDIO_MASK_RXDAVLIE ((uint32_t)0x00200000) /*!<Data available in Rx FIFO interrupt Enable */
+#define SDIO_MASK_SDIOITIE ((uint32_t)0x00400000) /*!<SDIO Mode Interrupt Received interrupt Enable */
+#define SDIO_MASK_CEATAENDIE ((uint32_t)0x00800000) /*!<CE-ATA command completion signal received Interrupt Enable */
+
+/***************** Bit definition for SDIO_FIFOCNT register *****************/
+#define SDIO_FIFOCNT_FIFOCOUNT ((uint32_t)0x00FFFFFF) /*!<Remaining number of words to be written to or read from the FIFO */
+
+/****************** Bit definition for SDIO_FIFO register *******************/
+#define SDIO_FIFO_FIFODATA ((uint32_t)0xFFFFFFFF) /*!<Receive and transmit FIFO data */
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA ((uint16_t)0x0001) /*!<Clock Phase */
+#define SPI_CR1_CPOL ((uint16_t)0x0002) /*!<Clock Polarity */
+#define SPI_CR1_MSTR ((uint16_t)0x0004) /*!<Master Selection */
+
+#define SPI_CR1_BR ((uint16_t)0x0038) /*!<BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint16_t)0x0008) /*!<Bit 0 */
+#define SPI_CR1_BR_1 ((uint16_t)0x0010) /*!<Bit 1 */
+#define SPI_CR1_BR_2 ((uint16_t)0x0020) /*!<Bit 2 */
+
+#define SPI_CR1_SPE ((uint16_t)0x0040) /*!<SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint16_t)0x0080) /*!<Frame Format */
+#define SPI_CR1_SSI ((uint16_t)0x0100) /*!<Internal slave select */
+#define SPI_CR1_SSM ((uint16_t)0x0200) /*!<Software slave management */
+#define SPI_CR1_RXONLY ((uint16_t)0x0400) /*!<Receive only */
+#define SPI_CR1_DFF ((uint16_t)0x0800) /*!<Data Frame Format */
+#define SPI_CR1_CRCNEXT ((uint16_t)0x1000) /*!<Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint16_t)0x2000) /*!<Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint16_t)0x4000) /*!<Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint16_t)0x8000) /*!<Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN ((uint8_t)0x01) /*!<Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint8_t)0x02) /*!<Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint8_t)0x04) /*!<SS Output Enable */
+#define SPI_CR2_ERRIE ((uint8_t)0x20) /*!<Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint8_t)0x40) /*!<RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint8_t)0x80) /*!<Tx buffer Empty Interrupt Enable */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE ((uint8_t)0x01) /*!<Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint8_t)0x02) /*!<Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint8_t)0x04) /*!<Channel side */
+#define SPI_SR_UDR ((uint8_t)0x08) /*!<Underrun flag */
+#define SPI_SR_CRCERR ((uint8_t)0x10) /*!<CRC Error flag */
+#define SPI_SR_MODF ((uint8_t)0x20) /*!<Mode fault */
+#define SPI_SR_OVR ((uint8_t)0x40) /*!<Overrun flag */
+#define SPI_SR_BSY ((uint8_t)0x80) /*!<Busy flag */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR ((uint16_t)0xFFFF) /*!<Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY ((uint16_t)0xFFFF) /*!<CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC ((uint16_t)0xFFFF) /*!<Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC ((uint16_t)0xFFFF) /*!<Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN ((uint16_t)0x0001) /*!<Channel length (number of bits per audio channel) */
+
+#define SPI_I2SCFGR_DATLEN ((uint16_t)0x0006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint16_t)0x0002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint16_t)0x0004) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_CKPOL ((uint16_t)0x0008) /*!<steady state clock polarity */
+
+#define SPI_I2SCFGR_I2SSTD ((uint16_t)0x0030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint16_t)0x0020) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_PCMSYNC ((uint16_t)0x0080) /*!<PCM frame synchronization */
+
+#define SPI_I2SCFGR_I2SCFG ((uint16_t)0x0300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint16_t)0x0200) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_I2SE ((uint16_t)0x0400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint16_t)0x0800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV ((uint16_t)0x00FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint16_t)0x0100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint16_t)0x0200) /*!<Master Clock Output Enable */
+
+/******************************************************************************/
+/* */
+/* SYSCFG */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SYSCFG_MEMRMP register ***************/
+#define SYSCFG_MEMRMP_MEM_MODE ((uint32_t)0x00000003) /*!<SYSCFG_Memory Remap Config */
+#define SYSCFG_MEMRMP_MEM_MODE_0 ((uint32_t)0x00000001)
+#define SYSCFG_MEMRMP_MEM_MODE_1 ((uint32_t)0x00000002)
+
+/****************** Bit definition for SYSCFG_PMC register ******************/
+#define SYSCFG_PMC_MII_RMII_SEL ((uint32_t)0x00800000) /*!<Ethernet PHY interface selection */
+/* Old MII_RMII_SEL bit definition, maintained for legacy purpose */
+#define SYSCFG_PMC_MII_RMII SYSCFG_PMC_MII_RMII_SEL
+
+/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!<EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!<EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!<EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!<EXTI 3 configuration */
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!<PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!<PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!<PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!<PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!<PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!<PF[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /*!<PG[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH ((uint16_t)0x0007) /*!<PH[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PI ((uint16_t)0x0008) /*!<PI[0] pin */
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!<PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!<PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!<PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!<PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!<PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!<PF[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /*!<PG[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH ((uint16_t)0x0070) /*!<PH[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PI ((uint16_t)0x0080) /*!<PI[1] pin */
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!<PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!<PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!<PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!<PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!<PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!<PF[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /*!<PG[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PH ((uint16_t)0x0700) /*!<PH[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PI ((uint16_t)0x0800) /*!<PI[2] pin */
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!<PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!<PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!<PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!<PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!<PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!<PF[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /*!<PG[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PH ((uint16_t)0x7000) /*!<PH[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PI ((uint16_t)0x8000) /*!<PI[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register ***************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!<EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!<EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!<EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!<EXTI 7 configuration */
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!<PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!<PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!<PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!<PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!<PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!<PF[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PG ((uint16_t)0x0006) /*!<PG[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PH ((uint16_t)0x0007) /*!<PH[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PI ((uint16_t)0x0008) /*!<PI[4] pin */
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!<PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!<PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!<PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!<PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!<PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!<PF[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PG ((uint16_t)0x0060) /*!<PG[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PH ((uint16_t)0x0070) /*!<PH[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PI ((uint16_t)0x0080) /*!<PI[5] pin */
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!<PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!<PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!<PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!<PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!<PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!<PF[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PG ((uint16_t)0x0600) /*!<PG[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PH ((uint16_t)0x0700) /*!<PH[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PI ((uint16_t)0x0800) /*!<PI[6] pin */
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!<PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!<PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!<PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!<PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!<PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!<PF[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PG ((uint16_t)0x6000) /*!<PG[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PH ((uint16_t)0x7000) /*!<PH[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PI ((uint16_t)0x8000) /*!<PI[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register ***************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!<EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!<EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!<EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!<EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!<PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!<PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!<PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!<PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!<PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!<PF[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PG ((uint16_t)0x0006) /*!<PG[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PH ((uint16_t)0x0007) /*!<PH[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PI ((uint16_t)0x0008) /*!<PI[8] pin */
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!<PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!<PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!<PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!<PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!<PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!<PF[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PG ((uint16_t)0x0060) /*!<PG[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PH ((uint16_t)0x0070) /*!<PH[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PI ((uint16_t)0x0080) /*!<PI[9] pin */
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!<PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!<PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!<PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!<PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!<PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!<PF[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PG ((uint16_t)0x0600) /*!<PG[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PH ((uint16_t)0x0700) /*!<PH[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PI ((uint16_t)0x0800) /*!<PI[10] pin */
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!<PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!<PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!<PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!<PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!<PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!<PF[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PG ((uint16_t)0x6000) /*!<PG[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PH ((uint16_t)0x7000) /*!<PH[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PI ((uint16_t)0x8000) /*!<PI[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register ***************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!<EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!<EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!<EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!<EXTI 15 configuration */
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!<PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!<PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!<PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!<PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!<PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!<PF[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PG ((uint16_t)0x0006) /*!<PG[12] pin */
+#define SYSCFG_EXTICR3_EXTI12_PH ((uint16_t)0x0007) /*!<PH[12] pin */
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!<PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!<PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!<PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!<PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!<PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!<PF[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PG ((uint16_t)0x0060) /*!<PG[13] pin */
+#define SYSCFG_EXTICR3_EXTI13_PH ((uint16_t)0x0070) /*!<PH[13] pin */
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!<PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!<PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!<PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!<PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!<PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!<PF[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PG ((uint16_t)0x0600) /*!<PG[14] pin */
+#define SYSCFG_EXTICR3_EXTI14_PH ((uint16_t)0x0700) /*!<PH[14] pin */
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!<PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!<PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!<PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!<PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!<PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!<PF[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PG ((uint16_t)0x6000) /*!<PG[15] pin */
+#define SYSCFG_EXTICR3_EXTI15_PH ((uint16_t)0x7000) /*!<PH[15] pin */
+
+/****************** Bit definition for SYSCFG_CMPCR register ****************/
+#define SYSCFG_CMPCR_CMP_PD ((uint32_t)0x00000001) /*!<Compensation cell ready flag */
+#define SYSCFG_CMPCR_READY ((uint32_t)0x00000100) /*!<Compensation cell power-down */
+
+/******************************************************************************/
+/* */
+/* TIM */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN ((uint16_t)0x0001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint16_t)0x0002) /*!<Update disable */
+#define TIM_CR1_URS ((uint16_t)0x0004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint16_t)0x0008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint16_t)0x0010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint16_t)0x0060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint16_t)0x0020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint16_t)0x0040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint16_t)0x0080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint16_t)0x0300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint16_t)0x0200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCPC ((uint16_t)0x0001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint16_t)0x0004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint16_t)0x0008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint16_t)0x0070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint16_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint16_t)0x0080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint16_t)0x0100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint16_t)0x0200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint16_t)0x0400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint16_t)0x0800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint16_t)0x1000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint16_t)0x2000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint16_t)0x4000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS ((uint16_t)0x0007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint16_t)0x0004) /*!<Bit 2 */
+
+#define TIM_SMCR_TS ((uint16_t)0x0070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint16_t)0x0040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint16_t)0x0080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint16_t)0x0F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint16_t)0x0200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint16_t)0x0400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint16_t)0x0800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint16_t)0x3000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint16_t)0x1000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint16_t)0x2000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint16_t)0x4000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint16_t)0x8000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE ((uint16_t)0x0001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint16_t)0x0002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint16_t)0x0004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint16_t)0x0008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint16_t)0x0010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint16_t)0x0020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint16_t)0x0040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint16_t)0x0080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint16_t)0x0100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint16_t)0x0200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint16_t)0x0400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint16_t)0x0800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint16_t)0x1000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint16_t)0x4000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF ((uint16_t)0x0001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint16_t)0x0002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint16_t)0x0004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint16_t)0x0008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint16_t)0x0010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint16_t)0x0020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint16_t)0x0040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint16_t)0x0080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint16_t)0x0200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint16_t)0x0400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint16_t)0x0800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint16_t)0x1000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG ((uint8_t)0x01) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint8_t)0x02) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint8_t)0x04) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint8_t)0x08) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint8_t)0x10) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint8_t)0x20) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint8_t)0x40) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint8_t)0x80) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S ((uint16_t)0x0003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint16_t)0x0002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint16_t)0x0004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint16_t)0x0008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint16_t)0x0070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint16_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint16_t)0x0080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint16_t)0x0300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint16_t)0x0200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint16_t)0x0400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint16_t)0x0800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint16_t)0x7000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint16_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint16_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint16_t)0x4000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint16_t)0x8000) /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint16_t)0x000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint16_t)0x0004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint16_t)0x0008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint16_t)0x00F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint16_t)0x0040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint16_t)0x0080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint16_t)0x0C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint16_t)0x0400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint16_t)0x0800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint16_t)0xF000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint16_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint16_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint16_t)0x4000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint16_t)0x8000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S ((uint16_t)0x0003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint16_t)0x0002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint16_t)0x0004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint16_t)0x0008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint16_t)0x0070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint16_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint16_t)0x0080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint16_t)0x0300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint16_t)0x0200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint16_t)0x0400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint16_t)0x0800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint16_t)0x7000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint16_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint16_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint16_t)0x4000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint16_t)0x8000) /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint16_t)0x000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint16_t)0x0004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint16_t)0x0008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint16_t)0x00F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint16_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint16_t)0x0040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint16_t)0x0080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint16_t)0x0C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint16_t)0x0400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint16_t)0x0800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint16_t)0xF000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint16_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint16_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint16_t)0x4000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint16_t)0x8000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E ((uint16_t)0x0001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint16_t)0x0002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint16_t)0x0004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint16_t)0x0008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint16_t)0x0010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint16_t)0x0020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint16_t)0x0040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint16_t)0x0080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint16_t)0x0100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint16_t)0x0200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint16_t)0x0400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint16_t)0x0800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint16_t)0x1000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint16_t)0x2000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint16_t)0x8000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT ((uint16_t)0xFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC ((uint16_t)0xFFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR ((uint16_t)0xFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register ********************/
+#define TIM_RCR_REP ((uint8_t)0xFF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 ((uint16_t)0xFFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 ((uint16_t)0xFFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 ((uint16_t)0xFFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 ((uint16_t)0xFFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register *******************/
+#define TIM_BDTR_DTG ((uint16_t)0x00FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint16_t)0x0010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint16_t)0x0020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint16_t)0x0040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint16_t)0x0080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint16_t)0x0300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint16_t)0x0200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint16_t)0x0400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint16_t)0x0800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint16_t)0x1000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint16_t)0x2000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint16_t)0x4000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint16_t)0x8000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA ((uint16_t)0x001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint16_t)0x0010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint16_t)0x1F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint16_t)0x0200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint16_t)0x0400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint16_t)0x0800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint16_t)0x1000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB ((uint16_t)0xFFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM_OR register *********************/
+#define TIM_OR_TI4_RMP ((uint16_t)0x00C0) /*!<TI4_RMP[1:0] bits (TIM5 Input 4 remap) */
+#define TIM_OR_TI4_RMP_0 ((uint16_t)0x0040) /*!<Bit 0 */
+#define TIM_OR_TI4_RMP_1 ((uint16_t)0x0080) /*!<Bit 1 */
+#define TIM_OR_ITR1_RMP ((uint16_t)0x0C00) /*!<ITR1_RMP[1:0] bits (TIM2 Internal trigger 1 remap) */
+#define TIM_OR_ITR1_RMP_0 ((uint16_t)0x0400) /*!<Bit 0 */
+#define TIM_OR_ITR1_RMP_1 ((uint16_t)0x0800) /*!<Bit 1 */
+
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter */
+/* */
+/******************************************************************************/
+/******************* Bit definition for USART_SR register *******************/
+#define USART_SR_PE ((uint16_t)0x0001) /*!<Parity Error */
+#define USART_SR_FE ((uint16_t)0x0002) /*!<Framing Error */
+#define USART_SR_NE ((uint16_t)0x0004) /*!<Noise Error Flag */
+#define USART_SR_ORE ((uint16_t)0x0008) /*!<OverRun Error */
+#define USART_SR_IDLE ((uint16_t)0x0010) /*!<IDLE line detected */
+#define USART_SR_RXNE ((uint16_t)0x0020) /*!<Read Data Register Not Empty */
+#define USART_SR_TC ((uint16_t)0x0040) /*!<Transmission Complete */
+#define USART_SR_TXE ((uint16_t)0x0080) /*!<Transmit Data Register Empty */
+#define USART_SR_LBD ((uint16_t)0x0100) /*!<LIN Break Detection Flag */
+#define USART_SR_CTS ((uint16_t)0x0200) /*!<CTS Flag */
+
+/******************* Bit definition for USART_DR register *******************/
+#define USART_DR_DR ((uint16_t)0x01FF) /*!<Data value */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_Fraction ((uint16_t)0x000F) /*!<Fraction of USARTDIV */
+#define USART_BRR_DIV_Mantissa ((uint16_t)0xFFF0) /*!<Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_SBK ((uint16_t)0x0001) /*!<Send Break */
+#define USART_CR1_RWU ((uint16_t)0x0002) /*!<Receiver wakeup */
+#define USART_CR1_RE ((uint16_t)0x0004) /*!<Receiver Enable */
+#define USART_CR1_TE ((uint16_t)0x0008) /*!<Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint16_t)0x0010) /*!<IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint16_t)0x0020) /*!<RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint16_t)0x0040) /*!<Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint16_t)0x0080) /*!<PE Interrupt Enable */
+#define USART_CR1_PEIE ((uint16_t)0x0100) /*!<PE Interrupt Enable */
+#define USART_CR1_PS ((uint16_t)0x0200) /*!<Parity Selection */
+#define USART_CR1_PCE ((uint16_t)0x0400) /*!<Parity Control Enable */
+#define USART_CR1_WAKE ((uint16_t)0x0800) /*!<Wakeup method */
+#define USART_CR1_M ((uint16_t)0x1000) /*!<Word length */
+#define USART_CR1_UE ((uint16_t)0x2000) /*!<USART Enable */
+#define USART_CR1_OVER8 ((uint16_t)0x8000) /*!<USART Oversampling by 8 enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADD ((uint16_t)0x000F) /*!<Address of the USART node */
+#define USART_CR2_LBDL ((uint16_t)0x0020) /*!<LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint16_t)0x0040) /*!<LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint16_t)0x0100) /*!<Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint16_t)0x0200) /*!<Clock Phase */
+#define USART_CR2_CPOL ((uint16_t)0x0400) /*!<Clock Polarity */
+#define USART_CR2_CLKEN ((uint16_t)0x0800) /*!<Clock Enable */
+
+#define USART_CR2_STOP ((uint16_t)0x3000) /*!<STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint16_t)0x1000) /*!<Bit 0 */
+#define USART_CR2_STOP_1 ((uint16_t)0x2000) /*!<Bit 1 */
+
+#define USART_CR2_LINEN ((uint16_t)0x4000) /*!<LIN mode enable */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint16_t)0x0001) /*!<Error Interrupt Enable */
+#define USART_CR3_IREN ((uint16_t)0x0002) /*!<IrDA mode Enable */
+#define USART_CR3_IRLP ((uint16_t)0x0004) /*!<IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint16_t)0x0008) /*!<Half-Duplex Selection */
+#define USART_CR3_NACK ((uint16_t)0x0010) /*!<Smartcard NACK enable */
+#define USART_CR3_SCEN ((uint16_t)0x0020) /*!<Smartcard mode enable */
+#define USART_CR3_DMAR ((uint16_t)0x0040) /*!<DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint16_t)0x0080) /*!<DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint16_t)0x0100) /*!<RTS Enable */
+#define USART_CR3_CTSE ((uint16_t)0x0200) /*!<CTS Enable */
+#define USART_CR3_CTSIE ((uint16_t)0x0400) /*!<CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint16_t)0x0800) /*!<USART One bit method enable */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint16_t)0x00FF) /*!<PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_PSC_0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define USART_GTPR_PSC_1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define USART_GTPR_PSC_2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define USART_GTPR_PSC_3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define USART_GTPR_PSC_4 ((uint16_t)0x0010) /*!<Bit 4 */
+#define USART_GTPR_PSC_5 ((uint16_t)0x0020) /*!<Bit 5 */
+#define USART_GTPR_PSC_6 ((uint16_t)0x0040) /*!<Bit 6 */
+#define USART_GTPR_PSC_7 ((uint16_t)0x0080) /*!<Bit 7 */
+
+#define USART_GTPR_GT ((uint16_t)0xFF00) /*!<Guard time value */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint8_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint8_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint8_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint8_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint8_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint8_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint8_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint8_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint8_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint16_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint16_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint16_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint16_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint16_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint16_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint16_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint16_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint16_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint16_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint16_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint16_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint8_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+
+/******************************************************************************/
+/* */
+/* DBG */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DBGMCU_IDCODE register *************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF)
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000)
+
+/******************** Bit definition for DBGMCU_CR register *****************/
+#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001)
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002)
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004)
+#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020)
+
+#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0)
+#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040)/*!<Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080)/*!<Bit 1 */
+
+/******************** Bit definition for DBGMCU_APB1_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB1_FZ_DBG_TIM4_STOP ((uint32_t)0x00000004)
+#define DBGMCU_APB1_FZ_DBG_TIM5_STOP ((uint32_t)0x00000008)
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010)
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020)
+#define DBGMCU_APB1_FZ_DBG_TIM12_STOP ((uint32_t)0x00000040)
+#define DBGMCU_APB1_FZ_DBG_TIM13_STOP ((uint32_t)0x00000080)
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100)
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400)
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800)
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000)
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
+#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000)
+#define DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT ((uint32_t)0x00800000)
+#define DBGMCU_APB1_FZ_DBG_CAN1_STOP ((uint32_t)0x02000000)
+#define DBGMCU_APB1_FZ_DBG_CAN2_STOP ((uint32_t)0x04000000)
+/* Old IWDGSTOP bit definition, maintained for legacy purpose */
+#define DBGMCU_APB1_FZ_DBG_IWDEG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP
+
+/******************** Bit definition for DBGMCU_APB2_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM1_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB1_FZ_DBG_TIM8_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB1_FZ_DBG_TIM9_STOP ((uint32_t)0x00010000)
+#define DBGMCU_APB1_FZ_DBG_TIM10_STOP ((uint32_t)0x00020000)
+#define DBGMCU_APB1_FZ_DBG_TIM11_STOP ((uint32_t)0x00040000)
+
+/******************************************************************************/
+/* */
+/* Ethernet MAC Registers bits definitions */
+/* */
+/******************************************************************************/
+/* Bit definition for Ethernet MAC Control Register register */
+#define ETH_MACCR_WD ((uint32_t)0x00800000) /* Watchdog disable */
+#define ETH_MACCR_JD ((uint32_t)0x00400000) /* Jabber disable */
+#define ETH_MACCR_IFG ((uint32_t)0x000E0000) /* Inter-frame gap */
+#define ETH_MACCR_IFG_96Bit ((uint32_t)0x00000000) /* Minimum IFG between frames during transmission is 96Bit */
+ #define ETH_MACCR_IFG_88Bit ((uint32_t)0x00020000) /* Minimum IFG between frames during transmission is 88Bit */
+ #define ETH_MACCR_IFG_80Bit ((uint32_t)0x00040000) /* Minimum IFG between frames during transmission is 80Bit */
+ #define ETH_MACCR_IFG_72Bit ((uint32_t)0x00060000) /* Minimum IFG between frames during transmission is 72Bit */
+ #define ETH_MACCR_IFG_64Bit ((uint32_t)0x00080000) /* Minimum IFG between frames during transmission is 64Bit */
+ #define ETH_MACCR_IFG_56Bit ((uint32_t)0x000A0000) /* Minimum IFG between frames during transmission is 56Bit */
+ #define ETH_MACCR_IFG_48Bit ((uint32_t)0x000C0000) /* Minimum IFG between frames during transmission is 48Bit */
+ #define ETH_MACCR_IFG_40Bit ((uint32_t)0x000E0000) /* Minimum IFG between frames during transmission is 40Bit */
+#define ETH_MACCR_CSD ((uint32_t)0x00010000) /* Carrier sense disable (during transmission) */
+#define ETH_MACCR_FES ((uint32_t)0x00004000) /* Fast ethernet speed */
+#define ETH_MACCR_ROD ((uint32_t)0x00002000) /* Receive own disable */
+#define ETH_MACCR_LM ((uint32_t)0x00001000) /* loopback mode */
+#define ETH_MACCR_DM ((uint32_t)0x00000800) /* Duplex mode */
+#define ETH_MACCR_IPCO ((uint32_t)0x00000400) /* IP Checksum offload */
+#define ETH_MACCR_RD ((uint32_t)0x00000200) /* Retry disable */
+#define ETH_MACCR_APCS ((uint32_t)0x00000080) /* Automatic Pad/CRC stripping */
+#define ETH_MACCR_BL ((uint32_t)0x00000060) /* Back-off limit: random integer number (r) of slot time delays before rescheduling
+ a transmission attempt during retries after a collision: 0 =< r <2^k */
+ #define ETH_MACCR_BL_10 ((uint32_t)0x00000000) /* k = min (n, 10) */
+ #define ETH_MACCR_BL_8 ((uint32_t)0x00000020) /* k = min (n, 8) */
+ #define ETH_MACCR_BL_4 ((uint32_t)0x00000040) /* k = min (n, 4) */
+ #define ETH_MACCR_BL_1 ((uint32_t)0x00000060) /* k = min (n, 1) */
+#define ETH_MACCR_DC ((uint32_t)0x00000010) /* Defferal check */
+#define ETH_MACCR_TE ((uint32_t)0x00000008) /* Transmitter enable */
+#define ETH_MACCR_RE ((uint32_t)0x00000004) /* Receiver enable */
+
+/* Bit definition for Ethernet MAC Frame Filter Register */
+#define ETH_MACFFR_RA ((uint32_t)0x80000000) /* Receive all */
+#define ETH_MACFFR_HPF ((uint32_t)0x00000400) /* Hash or perfect filter */
+#define ETH_MACFFR_SAF ((uint32_t)0x00000200) /* Source address filter enable */
+#define ETH_MACFFR_SAIF ((uint32_t)0x00000100) /* SA inverse filtering */
+#define ETH_MACFFR_PCF ((uint32_t)0x000000C0) /* Pass control frames: 3 cases */
+ #define ETH_MACFFR_PCF_BlockAll ((uint32_t)0x00000040) /* MAC filters all control frames from reaching the application */
+ #define ETH_MACFFR_PCF_ForwardAll ((uint32_t)0x00000080) /* MAC forwards all control frames to application even if they fail the Address Filter */
+ #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0) /* MAC forwards control frames that pass the Address Filter. */
+#define ETH_MACFFR_BFD ((uint32_t)0x00000020) /* Broadcast frame disable */
+#define ETH_MACFFR_PAM ((uint32_t)0x00000010) /* Pass all mutlicast */
+#define ETH_MACFFR_DAIF ((uint32_t)0x00000008) /* DA Inverse filtering */
+#define ETH_MACFFR_HM ((uint32_t)0x00000004) /* Hash multicast */
+#define ETH_MACFFR_HU ((uint32_t)0x00000002) /* Hash unicast */
+#define ETH_MACFFR_PM ((uint32_t)0x00000001) /* Promiscuous mode */
+
+/* Bit definition for Ethernet MAC Hash Table High Register */
+#define ETH_MACHTHR_HTH ((uint32_t)0xFFFFFFFF) /* Hash table high */
+
+/* Bit definition for Ethernet MAC Hash Table Low Register */
+#define ETH_MACHTLR_HTL ((uint32_t)0xFFFFFFFF) /* Hash table low */
+
+/* Bit definition for Ethernet MAC MII Address Register */
+#define ETH_MACMIIAR_PA ((uint32_t)0x0000F800) /* Physical layer address */
+#define ETH_MACMIIAR_MR ((uint32_t)0x000007C0) /* MII register in the selected PHY */
+#define ETH_MACMIIAR_CR ((uint32_t)0x0000001C) /* CR clock range: 6 cases */
+ #define ETH_MACMIIAR_CR_Div42 ((uint32_t)0x00000000) /* HCLK:60-100 MHz; MDC clock= HCLK/42 */
+ #define ETH_MACMIIAR_CR_Div62 ((uint32_t)0x00000004) /* HCLK:100-150 MHz; MDC clock= HCLK/62 */
+ #define ETH_MACMIIAR_CR_Div16 ((uint32_t)0x00000008) /* HCLK:20-35 MHz; MDC clock= HCLK/16 */
+ #define ETH_MACMIIAR_CR_Div26 ((uint32_t)0x0000000C) /* HCLK:35-60 MHz; MDC clock= HCLK/26 */
+ #define ETH_MACMIIAR_CR_Div102 ((uint32_t)0x00000010) /* HCLK:150-168 MHz; MDC clock= HCLK/102 */
+#define ETH_MACMIIAR_MW ((uint32_t)0x00000002) /* MII write */
+#define ETH_MACMIIAR_MB ((uint32_t)0x00000001) /* MII busy */
+
+/* Bit definition for Ethernet MAC MII Data Register */
+#define ETH_MACMIIDR_MD ((uint32_t)0x0000FFFF) /* MII data: read/write data from/to PHY */
+
+/* Bit definition for Ethernet MAC Flow Control Register */
+#define ETH_MACFCR_PT ((uint32_t)0xFFFF0000) /* Pause time */
+#define ETH_MACFCR_ZQPD ((uint32_t)0x00000080) /* Zero-quanta pause disable */
+#define ETH_MACFCR_PLT ((uint32_t)0x00000030) /* Pause low threshold: 4 cases */
+ #define ETH_MACFCR_PLT_Minus4 ((uint32_t)0x00000000) /* Pause time minus 4 slot times */
+ #define ETH_MACFCR_PLT_Minus28 ((uint32_t)0x00000010) /* Pause time minus 28 slot times */
+ #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020) /* Pause time minus 144 slot times */
+ #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030) /* Pause time minus 256 slot times */
+#define ETH_MACFCR_UPFD ((uint32_t)0x00000008) /* Unicast pause frame detect */
+#define ETH_MACFCR_RFCE ((uint32_t)0x00000004) /* Receive flow control enable */
+#define ETH_MACFCR_TFCE ((uint32_t)0x00000002) /* Transmit flow control enable */
+#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001) /* Flow control busy/backpressure activate */
+
+/* Bit definition for Ethernet MAC VLAN Tag Register */
+#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000) /* 12-bit VLAN tag comparison */
+#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF) /* VLAN tag identifier (for receive frames) */
+
+/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */
+#define ETH_MACRWUFFR_D ((uint32_t)0xFFFFFFFF) /* Wake-up frame filter register data */
+/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers.
+ Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */
+/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask
+ Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask
+ Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask
+ Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask
+ Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command -
+ RSVD - Filter1 Command - RSVD - Filter0 Command
+ Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset
+ Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16
+ Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */
+
+/* Bit definition for Ethernet MAC PMT Control and Status Register */
+#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000) /* Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_MACPMTCSR_GU ((uint32_t)0x00000200) /* Global Unicast */
+#define ETH_MACPMTCSR_WFR ((uint32_t)0x00000040) /* Wake-Up Frame Received */
+#define ETH_MACPMTCSR_MPR ((uint32_t)0x00000020) /* Magic Packet Received */
+#define ETH_MACPMTCSR_WFE ((uint32_t)0x00000004) /* Wake-Up Frame Enable */
+#define ETH_MACPMTCSR_MPE ((uint32_t)0x00000002) /* Magic Packet Enable */
+#define ETH_MACPMTCSR_PD ((uint32_t)0x00000001) /* Power Down */
+
+/* Bit definition for Ethernet MAC Status Register */
+#define ETH_MACSR_TSTS ((uint32_t)0x00000200) /* Time stamp trigger status */
+#define ETH_MACSR_MMCTS ((uint32_t)0x00000040) /* MMC transmit status */
+#define ETH_MACSR_MMMCRS ((uint32_t)0x00000020) /* MMC receive status */
+#define ETH_MACSR_MMCS ((uint32_t)0x00000010) /* MMC status */
+#define ETH_MACSR_PMTS ((uint32_t)0x00000008) /* PMT status */
+
+/* Bit definition for Ethernet MAC Interrupt Mask Register */
+#define ETH_MACIMR_TSTIM ((uint32_t)0x00000200) /* Time stamp trigger interrupt mask */
+#define ETH_MACIMR_PMTIM ((uint32_t)0x00000008) /* PMT interrupt mask */
+
+/* Bit definition for Ethernet MAC Address0 High Register */
+#define ETH_MACA0HR_MACA0H ((uint32_t)0x0000FFFF) /* MAC address0 high */
+
+/* Bit definition for Ethernet MAC Address0 Low Register */
+#define ETH_MACA0LR_MACA0L ((uint32_t)0xFFFFFFFF) /* MAC address0 low */
+
+/* Bit definition for Ethernet MAC Address1 High Register */
+#define ETH_MACA1HR_AE ((uint32_t)0x80000000) /* Address enable */
+#define ETH_MACA1HR_SA ((uint32_t)0x40000000) /* Source address */
+#define ETH_MACA1HR_MBC ((uint32_t)0x3F000000) /* Mask byte control: bits to mask for comparison of the MAC Address bytes */
+ #define ETH_MACA1HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */
+ #define ETH_MACA1HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */
+ #define ETH_MACA1HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */
+ #define ETH_MACA1HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */
+ #define ETH_MACA1HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */
+ #define ETH_MACA1HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [7:0] */
+#define ETH_MACA1HR_MACA1H ((uint32_t)0x0000FFFF) /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address1 Low Register */
+#define ETH_MACA1LR_MACA1L ((uint32_t)0xFFFFFFFF) /* MAC address1 low */
+
+/* Bit definition for Ethernet MAC Address2 High Register */
+#define ETH_MACA2HR_AE ((uint32_t)0x80000000) /* Address enable */
+#define ETH_MACA2HR_SA ((uint32_t)0x40000000) /* Source address */
+#define ETH_MACA2HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */
+ #define ETH_MACA2HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */
+ #define ETH_MACA2HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */
+ #define ETH_MACA2HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */
+ #define ETH_MACA2HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */
+ #define ETH_MACA2HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */
+ #define ETH_MACA2HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA2HR_MACA2H ((uint32_t)0x0000FFFF) /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address2 Low Register */
+#define ETH_MACA2LR_MACA2L ((uint32_t)0xFFFFFFFF) /* MAC address2 low */
+
+/* Bit definition for Ethernet MAC Address3 High Register */
+#define ETH_MACA3HR_AE ((uint32_t)0x80000000) /* Address enable */
+#define ETH_MACA3HR_SA ((uint32_t)0x40000000) /* Source address */
+#define ETH_MACA3HR_MBC ((uint32_t)0x3F000000) /* Mask byte control */
+ #define ETH_MACA3HR_MBC_HBits15_8 ((uint32_t)0x20000000) /* Mask MAC Address high reg bits [15:8] */
+ #define ETH_MACA3HR_MBC_HBits7_0 ((uint32_t)0x10000000) /* Mask MAC Address high reg bits [7:0] */
+ #define ETH_MACA3HR_MBC_LBits31_24 ((uint32_t)0x08000000) /* Mask MAC Address low reg bits [31:24] */
+ #define ETH_MACA3HR_MBC_LBits23_16 ((uint32_t)0x04000000) /* Mask MAC Address low reg bits [23:16] */
+ #define ETH_MACA3HR_MBC_LBits15_8 ((uint32_t)0x02000000) /* Mask MAC Address low reg bits [15:8] */
+ #define ETH_MACA3HR_MBC_LBits7_0 ((uint32_t)0x01000000) /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA3HR_MACA3H ((uint32_t)0x0000FFFF) /* MAC address3 high */
+
+/* Bit definition for Ethernet MAC Address3 Low Register */
+#define ETH_MACA3LR_MACA3L ((uint32_t)0xFFFFFFFF) /* MAC address3 low */
+
+/******************************************************************************/
+/* Ethernet MMC Registers bits definition */
+/******************************************************************************/
+
+/* Bit definition for Ethernet MMC Contol Register */
+#define ETH_MMCCR_MCFHP ((uint32_t)0x00000020) /* MMC counter Full-Half preset */
+#define ETH_MMCCR_MCP ((uint32_t)0x00000010) /* MMC counter preset */
+#define ETH_MMCCR_MCF ((uint32_t)0x00000008) /* MMC Counter Freeze */
+#define ETH_MMCCR_ROR ((uint32_t)0x00000004) /* Reset on Read */
+#define ETH_MMCCR_CSR ((uint32_t)0x00000002) /* Counter Stop Rollover */
+#define ETH_MMCCR_CR ((uint32_t)0x00000001) /* Counters Reset */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Register */
+#define ETH_MMCRIR_RGUFS ((uint32_t)0x00020000) /* Set when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIR_RFAES ((uint32_t)0x00000040) /* Set when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIR_RFCES ((uint32_t)0x00000020) /* Set when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Register */
+#define ETH_MMCTIR_TGFS ((uint32_t)0x00200000) /* Set when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFMSCS ((uint32_t)0x00008000) /* Set when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFSCS ((uint32_t)0x00004000) /* Set when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */
+#define ETH_MMCRIMR_RGUFM ((uint32_t)0x00020000) /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFAEM ((uint32_t)0x00000040) /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFCEM ((uint32_t)0x00000020) /* Mask the interrupt when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */
+#define ETH_MMCTIMR_TGFM ((uint32_t)0x00200000) /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFMSCM ((uint32_t)0x00008000) /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFSCM ((uint32_t)0x00004000) /* Mask the interrupt when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */
+#define ETH_MMCTGFSCCR_TGFSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */
+#define ETH_MMCTGFMSCCR_TGFMSCC ((uint32_t)0xFFFFFFFF) /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */
+#define ETH_MMCTGFCR_TGFC ((uint32_t)0xFFFFFFFF) /* Number of good frames transmitted. */
+
+/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */
+#define ETH_MMCRFCECR_RFCEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with CRC error. */
+
+/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */
+#define ETH_MMCRFAECR_RFAEC ((uint32_t)0xFFFFFFFF) /* Number of frames received with alignment (dribble) error */
+
+/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */
+#define ETH_MMCRGUFCR_RGUFC ((uint32_t)0xFFFFFFFF) /* Number of good unicast frames received. */
+
+/******************************************************************************/
+/* Ethernet PTP Registers bits definition */
+/******************************************************************************/
+
+/* Bit definition for Ethernet PTP Time Stamp Contol Register */
+#define ETH_PTPTSCR_TSCNT ((uint32_t)0x00030000) /* Time stamp clock node type */
+#define ETH_PTPTSSR_TSSMRME ((uint32_t)0x00008000) /* Time stamp snapshot for message relevant to master enable */
+#define ETH_PTPTSSR_TSSEME ((uint32_t)0x00004000) /* Time stamp snapshot for event message enable */
+#define ETH_PTPTSSR_TSSIPV4FE ((uint32_t)0x00002000) /* Time stamp snapshot for IPv4 frames enable */
+#define ETH_PTPTSSR_TSSIPV6FE ((uint32_t)0x00001000) /* Time stamp snapshot for IPv6 frames enable */
+#define ETH_PTPTSSR_TSSPTPOEFE ((uint32_t)0x00000800) /* Time stamp snapshot for PTP over ethernet frames enable */
+#define ETH_PTPTSSR_TSPTPPSV2E ((uint32_t)0x00000400) /* Time stamp PTP packet snooping for version2 format enable */
+#define ETH_PTPTSSR_TSSSR ((uint32_t)0x00000200) /* Time stamp Sub-seconds rollover */
+#define ETH_PTPTSSR_TSSARFE ((uint32_t)0x00000100) /* Time stamp snapshot for all received frames enable */
+
+#define ETH_PTPTSCR_TSARU ((uint32_t)0x00000020) /* Addend register update */
+#define ETH_PTPTSCR_TSITE ((uint32_t)0x00000010) /* Time stamp interrupt trigger enable */
+#define ETH_PTPTSCR_TSSTU ((uint32_t)0x00000008) /* Time stamp update */
+#define ETH_PTPTSCR_TSSTI ((uint32_t)0x00000004) /* Time stamp initialize */
+#define ETH_PTPTSCR_TSFCU ((uint32_t)0x00000002) /* Time stamp fine or coarse update */
+#define ETH_PTPTSCR_TSE ((uint32_t)0x00000001) /* Time stamp enable */
+
+/* Bit definition for Ethernet PTP Sub-Second Increment Register */
+#define ETH_PTPSSIR_STSSI ((uint32_t)0x000000FF) /* System time Sub-second increment value */
+
+/* Bit definition for Ethernet PTP Time Stamp High Register */
+#define ETH_PTPTSHR_STS ((uint32_t)0xFFFFFFFF) /* System Time second */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Register */
+#define ETH_PTPTSLR_STPNS ((uint32_t)0x80000000) /* System Time Positive or negative time */
+#define ETH_PTPTSLR_STSS ((uint32_t)0x7FFFFFFF) /* System Time sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp High Update Register */
+#define ETH_PTPTSHUR_TSUS ((uint32_t)0xFFFFFFFF) /* Time stamp update seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Update Register */
+#define ETH_PTPTSLUR_TSUPNS ((uint32_t)0x80000000) /* Time stamp update Positive or negative time */
+#define ETH_PTPTSLUR_TSUSS ((uint32_t)0x7FFFFFFF) /* Time stamp update sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Addend Register */
+#define ETH_PTPTSAR_TSA ((uint32_t)0xFFFFFFFF) /* Time stamp addend */
+
+/* Bit definition for Ethernet PTP Target Time High Register */
+#define ETH_PTPTTHR_TTSH ((uint32_t)0xFFFFFFFF) /* Target time stamp high */
+
+/* Bit definition for Ethernet PTP Target Time Low Register */
+#define ETH_PTPTTLR_TTSL ((uint32_t)0xFFFFFFFF) /* Target time stamp low */
+
+/* Bit definition for Ethernet PTP Time Stamp Status Register */
+#define ETH_PTPTSSR_TSTTR ((uint32_t)0x00000020) /* Time stamp target time reached */
+#define ETH_PTPTSSR_TSSO ((uint32_t)0x00000010) /* Time stamp seconds overflow */
+
+/******************************************************************************/
+/* Ethernet DMA Registers bits definition */
+/******************************************************************************/
+
+/* Bit definition for Ethernet DMA Bus Mode Register */
+#define ETH_DMABMR_AAB ((uint32_t)0x02000000) /* Address-Aligned beats */
+#define ETH_DMABMR_FPM ((uint32_t)0x01000000) /* 4xPBL mode */
+#define ETH_DMABMR_USP ((uint32_t)0x00800000) /* Use separate PBL */
+#define ETH_DMABMR_RDP ((uint32_t)0x007E0000) /* RxDMA PBL */
+ #define ETH_DMABMR_RDP_1Beat ((uint32_t)0x00020000) /* maximum number of beats to be transferred in one RxDMA transaction is 1 */
+ #define ETH_DMABMR_RDP_2Beat ((uint32_t)0x00040000) /* maximum number of beats to be transferred in one RxDMA transaction is 2 */
+ #define ETH_DMABMR_RDP_4Beat ((uint32_t)0x00080000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+ #define ETH_DMABMR_RDP_8Beat ((uint32_t)0x00100000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+ #define ETH_DMABMR_RDP_16Beat ((uint32_t)0x00200000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+ #define ETH_DMABMR_RDP_32Beat ((uint32_t)0x00400000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */
+ #define ETH_DMABMR_RDP_4xPBL_4Beat ((uint32_t)0x01020000) /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+ #define ETH_DMABMR_RDP_4xPBL_8Beat ((uint32_t)0x01040000) /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+ #define ETH_DMABMR_RDP_4xPBL_16Beat ((uint32_t)0x01080000) /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+ #define ETH_DMABMR_RDP_4xPBL_32Beat ((uint32_t)0x01100000) /* maximum number of beats to be transferred in one RxDMA transaction is 32 */
+ #define ETH_DMABMR_RDP_4xPBL_64Beat ((uint32_t)0x01200000) /* maximum number of beats to be transferred in one RxDMA transaction is 64 */
+ #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000) /* maximum number of beats to be transferred in one RxDMA transaction is 128 */
+#define ETH_DMABMR_FB ((uint32_t)0x00010000) /* Fixed Burst */
+#define ETH_DMABMR_RTPR ((uint32_t)0x0000C000) /* Rx Tx priority ratio */
+ #define ETH_DMABMR_RTPR_1_1 ((uint32_t)0x00000000) /* Rx Tx priority ratio */
+ #define ETH_DMABMR_RTPR_2_1 ((uint32_t)0x00004000) /* Rx Tx priority ratio */
+ #define ETH_DMABMR_RTPR_3_1 ((uint32_t)0x00008000) /* Rx Tx priority ratio */
+ #define ETH_DMABMR_RTPR_4_1 ((uint32_t)0x0000C000) /* Rx Tx priority ratio */
+#define ETH_DMABMR_PBL ((uint32_t)0x00003F00) /* Programmable burst length */
+ #define ETH_DMABMR_PBL_1Beat ((uint32_t)0x00000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+ #define ETH_DMABMR_PBL_2Beat ((uint32_t)0x00000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+ #define ETH_DMABMR_PBL_4Beat ((uint32_t)0x00000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+ #define ETH_DMABMR_PBL_8Beat ((uint32_t)0x00000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+ #define ETH_DMABMR_PBL_16Beat ((uint32_t)0x00001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+ #define ETH_DMABMR_PBL_32Beat ((uint32_t)0x00002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+ #define ETH_DMABMR_PBL_4xPBL_4Beat ((uint32_t)0x01000100) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+ #define ETH_DMABMR_PBL_4xPBL_8Beat ((uint32_t)0x01000200) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+ #define ETH_DMABMR_PBL_4xPBL_16Beat ((uint32_t)0x01000400) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+ #define ETH_DMABMR_PBL_4xPBL_32Beat ((uint32_t)0x01000800) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+ #define ETH_DMABMR_PBL_4xPBL_64Beat ((uint32_t)0x01001000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+ #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000) /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+#define ETH_DMABMR_EDE ((uint32_t)0x00000080) /* Enhanced Descriptor Enable */
+#define ETH_DMABMR_DSL ((uint32_t)0x0000007C) /* Descriptor Skip Length */
+#define ETH_DMABMR_DA ((uint32_t)0x00000002) /* DMA arbitration scheme */
+#define ETH_DMABMR_SR ((uint32_t)0x00000001) /* Software reset */
+
+/* Bit definition for Ethernet DMA Transmit Poll Demand Register */
+#define ETH_DMATPDR_TPD ((uint32_t)0xFFFFFFFF) /* Transmit poll demand */
+
+/* Bit definition for Ethernet DMA Receive Poll Demand Register */
+#define ETH_DMARPDR_RPD ((uint32_t)0xFFFFFFFF) /* Receive poll demand */
+
+/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */
+#define ETH_DMARDLAR_SRL ((uint32_t)0xFFFFFFFF) /* Start of receive list */
+
+/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */
+#define ETH_DMATDLAR_STL ((uint32_t)0xFFFFFFFF) /* Start of transmit list */
+
+/* Bit definition for Ethernet DMA Status Register */
+#define ETH_DMASR_TSTS ((uint32_t)0x20000000) /* Time-stamp trigger status */
+#define ETH_DMASR_PMTS ((uint32_t)0x10000000) /* PMT status */
+#define ETH_DMASR_MMCS ((uint32_t)0x08000000) /* MMC status */
+#define ETH_DMASR_EBS ((uint32_t)0x03800000) /* Error bits status */
+ /* combination with EBS[2:0] for GetFlagStatus function */
+ #define ETH_DMASR_EBS_DescAccess ((uint32_t)0x02000000) /* Error bits 0-data buffer, 1-desc. access */
+ #define ETH_DMASR_EBS_ReadTransf ((uint32_t)0x01000000) /* Error bits 0-write trnsf, 1-read transfr */
+ #define ETH_DMASR_EBS_DataTransfTx ((uint32_t)0x00800000) /* Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMASR_TPS ((uint32_t)0x00700000) /* Transmit process state */
+ #define ETH_DMASR_TPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Tx Command issued */
+ #define ETH_DMASR_TPS_Fetching ((uint32_t)0x00100000) /* Running - fetching the Tx descriptor */
+ #define ETH_DMASR_TPS_Waiting ((uint32_t)0x00200000) /* Running - waiting for status */
+ #define ETH_DMASR_TPS_Reading ((uint32_t)0x00300000) /* Running - reading the data from host memory */
+ #define ETH_DMASR_TPS_Suspended ((uint32_t)0x00600000) /* Suspended - Tx Descriptor unavailabe */
+ #define ETH_DMASR_TPS_Closing ((uint32_t)0x00700000) /* Running - closing Rx descriptor */
+#define ETH_DMASR_RPS ((uint32_t)0x000E0000) /* Receive process state */
+ #define ETH_DMASR_RPS_Stopped ((uint32_t)0x00000000) /* Stopped - Reset or Stop Rx Command issued */
+ #define ETH_DMASR_RPS_Fetching ((uint32_t)0x00020000) /* Running - fetching the Rx descriptor */
+ #define ETH_DMASR_RPS_Waiting ((uint32_t)0x00060000) /* Running - waiting for packet */
+ #define ETH_DMASR_RPS_Suspended ((uint32_t)0x00080000) /* Suspended - Rx Descriptor unavailable */
+ #define ETH_DMASR_RPS_Closing ((uint32_t)0x000A0000) /* Running - closing descriptor */
+ #define ETH_DMASR_RPS_Queuing ((uint32_t)0x000E0000) /* Running - queuing the recieve frame into host memory */
+#define ETH_DMASR_NIS ((uint32_t)0x00010000) /* Normal interrupt summary */
+#define ETH_DMASR_AIS ((uint32_t)0x00008000) /* Abnormal interrupt summary */
+#define ETH_DMASR_ERS ((uint32_t)0x00004000) /* Early receive status */
+#define ETH_DMASR_FBES ((uint32_t)0x00002000) /* Fatal bus error status */
+#define ETH_DMASR_ETS ((uint32_t)0x00000400) /* Early transmit status */
+#define ETH_DMASR_RWTS ((uint32_t)0x00000200) /* Receive watchdog timeout status */
+#define ETH_DMASR_RPSS ((uint32_t)0x00000100) /* Receive process stopped status */
+#define ETH_DMASR_RBUS ((uint32_t)0x00000080) /* Receive buffer unavailable status */
+#define ETH_DMASR_RS ((uint32_t)0x00000040) /* Receive status */
+#define ETH_DMASR_TUS ((uint32_t)0x00000020) /* Transmit underflow status */
+#define ETH_DMASR_ROS ((uint32_t)0x00000010) /* Receive overflow status */
+#define ETH_DMASR_TJTS ((uint32_t)0x00000008) /* Transmit jabber timeout status */
+#define ETH_DMASR_TBUS ((uint32_t)0x00000004) /* Transmit buffer unavailable status */
+#define ETH_DMASR_TPSS ((uint32_t)0x00000002) /* Transmit process stopped status */
+#define ETH_DMASR_TS ((uint32_t)0x00000001) /* Transmit status */
+
+/* Bit definition for Ethernet DMA Operation Mode Register */
+#define ETH_DMAOMR_DTCEFD ((uint32_t)0x04000000) /* Disable Dropping of TCP/IP checksum error frames */
+#define ETH_DMAOMR_RSF ((uint32_t)0x02000000) /* Receive store and forward */
+#define ETH_DMAOMR_DFRF ((uint32_t)0x01000000) /* Disable flushing of received frames */
+#define ETH_DMAOMR_TSF ((uint32_t)0x00200000) /* Transmit store and forward */
+#define ETH_DMAOMR_FTF ((uint32_t)0x00100000) /* Flush transmit FIFO */
+#define ETH_DMAOMR_TTC ((uint32_t)0x0001C000) /* Transmit threshold control */
+ #define ETH_DMAOMR_TTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Transmit FIFO is 64 Bytes */
+ #define ETH_DMAOMR_TTC_128Bytes ((uint32_t)0x00004000) /* threshold level of the MTL Transmit FIFO is 128 Bytes */
+ #define ETH_DMAOMR_TTC_192Bytes ((uint32_t)0x00008000) /* threshold level of the MTL Transmit FIFO is 192 Bytes */
+ #define ETH_DMAOMR_TTC_256Bytes ((uint32_t)0x0000C000) /* threshold level of the MTL Transmit FIFO is 256 Bytes */
+ #define ETH_DMAOMR_TTC_40Bytes ((uint32_t)0x00010000) /* threshold level of the MTL Transmit FIFO is 40 Bytes */
+ #define ETH_DMAOMR_TTC_32Bytes ((uint32_t)0x00014000) /* threshold level of the MTL Transmit FIFO is 32 Bytes */
+ #define ETH_DMAOMR_TTC_24Bytes ((uint32_t)0x00018000) /* threshold level of the MTL Transmit FIFO is 24 Bytes */
+ #define ETH_DMAOMR_TTC_16Bytes ((uint32_t)0x0001C000) /* threshold level of the MTL Transmit FIFO is 16 Bytes */
+#define ETH_DMAOMR_ST ((uint32_t)0x00002000) /* Start/stop transmission command */
+#define ETH_DMAOMR_FEF ((uint32_t)0x00000080) /* Forward error frames */
+#define ETH_DMAOMR_FUGF ((uint32_t)0x00000040) /* Forward undersized good frames */
+#define ETH_DMAOMR_RTC ((uint32_t)0x00000018) /* receive threshold control */
+ #define ETH_DMAOMR_RTC_64Bytes ((uint32_t)0x00000000) /* threshold level of the MTL Receive FIFO is 64 Bytes */
+ #define ETH_DMAOMR_RTC_32Bytes ((uint32_t)0x00000008) /* threshold level of the MTL Receive FIFO is 32 Bytes */
+ #define ETH_DMAOMR_RTC_96Bytes ((uint32_t)0x00000010) /* threshold level of the MTL Receive FIFO is 96 Bytes */
+ #define ETH_DMAOMR_RTC_128Bytes ((uint32_t)0x00000018) /* threshold level of the MTL Receive FIFO is 128 Bytes */
+#define ETH_DMAOMR_OSF ((uint32_t)0x00000004) /* operate on second frame */
+#define ETH_DMAOMR_SR ((uint32_t)0x00000002) /* Start/stop receive */
+
+/* Bit definition for Ethernet DMA Interrupt Enable Register */
+#define ETH_DMAIER_NISE ((uint32_t)0x00010000) /* Normal interrupt summary enable */
+#define ETH_DMAIER_AISE ((uint32_t)0x00008000) /* Abnormal interrupt summary enable */
+#define ETH_DMAIER_ERIE ((uint32_t)0x00004000) /* Early receive interrupt enable */
+#define ETH_DMAIER_FBEIE ((uint32_t)0x00002000) /* Fatal bus error interrupt enable */
+#define ETH_DMAIER_ETIE ((uint32_t)0x00000400) /* Early transmit interrupt enable */
+#define ETH_DMAIER_RWTIE ((uint32_t)0x00000200) /* Receive watchdog timeout interrupt enable */
+#define ETH_DMAIER_RPSIE ((uint32_t)0x00000100) /* Receive process stopped interrupt enable */
+#define ETH_DMAIER_RBUIE ((uint32_t)0x00000080) /* Receive buffer unavailable interrupt enable */
+#define ETH_DMAIER_RIE ((uint32_t)0x00000040) /* Receive interrupt enable */
+#define ETH_DMAIER_TUIE ((uint32_t)0x00000020) /* Transmit Underflow interrupt enable */
+#define ETH_DMAIER_ROIE ((uint32_t)0x00000010) /* Receive Overflow interrupt enable */
+#define ETH_DMAIER_TJTIE ((uint32_t)0x00000008) /* Transmit jabber timeout interrupt enable */
+#define ETH_DMAIER_TBUIE ((uint32_t)0x00000004) /* Transmit buffer unavailable interrupt enable */
+#define ETH_DMAIER_TPSIE ((uint32_t)0x00000002) /* Transmit process stopped interrupt enable */
+#define ETH_DMAIER_TIE ((uint32_t)0x00000001) /* Transmit interrupt enable */
+
+/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */
+#define ETH_DMAMFBOCR_OFOC ((uint32_t)0x10000000) /* Overflow bit for FIFO overflow counter */
+#define ETH_DMAMFBOCR_MFA ((uint32_t)0x0FFE0000) /* Number of frames missed by the application */
+#define ETH_DMAMFBOCR_OMFC ((uint32_t)0x00010000) /* Overflow bit for missed frame counter */
+#define ETH_DMAMFBOCR_MFC ((uint32_t)0x0000FFFF) /* Number of frames missed by the controller */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */
+#define ETH_DMACHTDR_HTDAP ((uint32_t)0xFFFFFFFF) /* Host transmit descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */
+#define ETH_DMACHRDR_HRDAP ((uint32_t)0xFFFFFFFF) /* Host receive descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */
+#define ETH_DMACHTBAR_HTBAP ((uint32_t)0xFFFFFFFF) /* Host transmit buffer address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */
+#define ETH_DMACHRBAR_HRBAP ((uint32_t)0xFFFFFFFF) /* Host receive buffer address pointer */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+#ifdef USE_STDPERIPH_DRIVER
+ #include "stm32f4xx_conf.h"
+#endif /* USE_STDPERIPH_DRIVER */
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F4xx_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff -r 4985455162fc -r 1c6281289d67 stm32f4xx_conf.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/stm32f4xx_conf.h Sun Nov 15 09:00:40 2015 +0000 @@ -0,0 +1,90 @@ +/** + ****************************************************************************** + * @file Project/STM32F4xx_StdPeriph_Templates/stm32f4xx_conf.h + * @author MCD Application Team + * @version V1.0.0 + * @date 30-September-2011 + * @brief Library configuration file. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_CONF_H +#define __STM32F4xx_CONF_H + +/* Includes ------------------------------------------------------------------*/ +/* Uncomment the line below to enable peripheral header file inclusion */ +//#include "stm32f4xx_adc.h" +//#include "stm32f4xx_can.h" +//#include "stm32f4xx_crc.h" +//#include "stm32f4xx_cryp.h" +//#include "stm32f4xx_dac.h" +//#include "stm32f4xx_dbgmcu.h" +//#include "stm32f4xx_dcmi.h" +//#include "stm32f4xx_dma.h" +//#include "stm32f4xx_exti.h" +//#include "stm32f4xx_flash.h" +//#include "stm32f4xx_fsmc.h" +//#include "stm32f4xx_hash.h" +//#include "stm32f4xx_gpio.h" +//#include "stm32f4xx_i2c.h" +//#include "stm32f4xx_iwdg.h" +//#include "stm32f4xx_pwr.h" +#include "stm32f4xx_rcc.h" +//#include "stm32f4xx_rng.h" +//#include "stm32f4xx_rtc.h" +//#include "stm32f4xx_sdio.h" +//#include "stm32f4xx_spi.h" +//#include "stm32f4xx_syscfg.h" +#include "stm32f4xx_tim.h" +//#include "stm32f4xx_usart.h" +//#include "stm32f4xx_wwdg.h" +#include "misc.h" +/* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* If an external clock source is used, then the value of the following define + should be set to the value of the external clock source, else, if no external + clock is used, keep this define commented */ +/*#define I2S_EXTERNAL_CLOCK_VAL 12288000 */ /* Value of the external clock in Hz */ + + +/* Uncomment the line below to expanse the "assert_param" macro in the + Standard Peripheral Library drivers code */ +/* #define USE_FULL_ASSERT 1 */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT + +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#endif /* __STM32F4xx_CONF_H */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ +
diff -r 4985455162fc -r 1c6281289d67 stm32f4xx_gpio.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32f4xx_gpio.c Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,562 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_gpio.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 30-September-2011
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the GPIO peripheral:
+ * - Initialization and Configuration
+ * - GPIO Read and Write
+ * - GPIO Alternate functions configuration
+ *
+ * @verbatim
+ *
+ * ===================================================================
+ * How to use this driver
+ * ===================================================================
+ * 1. Enable the GPIO AHB clock using the following function
+ * RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOx, ENABLE);
+ *
+ * 2. Configure the GPIO pin(s) using GPIO_Init()
+ * Four possible configuration are available for each pin:
+ * - Input: Floating, Pull-up, Pull-down.
+ * - Output: Push-Pull (Pull-up, Pull-down or no Pull)
+ * Open Drain (Pull-up, Pull-down or no Pull).
+ * In output mode, the speed is configurable: 2 MHz, 25 MHz,
+ * 50 MHz or 100 MHz.
+ * - Alternate Function: Push-Pull (Pull-up, Pull-down or no Pull)
+ * Open Drain (Pull-up, Pull-down or no Pull).
+ * - Analog: required mode when a pin is to be used as ADC channel
+ * or DAC output.
+ *
+ * 3- Peripherals alternate function:
+ * - For ADC and DAC, configure the desired pin in analog mode using
+ * GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AN;
+ * - For other peripherals (TIM, USART...):
+ * - Connect the pin to the desired peripherals' Alternate
+ * Function (AF) using GPIO_PinAFConfig() function
+ * - Configure the desired pin in alternate function mode using
+ * GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF
+ * - Select the type, pull-up/pull-down and output speed via
+ * GPIO_PuPd, GPIO_OType and GPIO_Speed members
+ * - Call GPIO_Init() function
+ *
+ * 4. To get the level of a pin configured in input mode use GPIO_ReadInputDataBit()
+ *
+ * 5. To set/reset the level of a pin configured in output mode use
+ * GPIO_SetBits()/GPIO_ResetBits()
+ *
+ * 6. During and just after reset, the alternate functions are not
+ * active and the GPIO pins are configured in input floating mode
+ * (except JTAG pins).
+ *
+ * 7. The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as
+ * general-purpose (PC14 and PC15, respectively) when the LSE
+ * oscillator is off. The LSE has priority over the GPIO function.
+ *
+ * 8. The HSE oscillator pins OSC_IN/OSC_OUT can be used as
+ * general-purpose PH0 and PH1, respectively, when the HSE
+ * oscillator is off. The HSE has priority over the GPIO function.
+ *
+ * @endverbatim
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_gpio.h"
+#include "stm32f4xx_rcc.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup GPIO
+ * @brief GPIO driver modules
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup GPIO_Private_Functions
+ * @{
+ */
+
+/** @defgroup GPIO_Group1 Initialization and Configuration
+ * @brief Initialization and Configuration
+ *
+@verbatim
+ ===============================================================================
+ Initialization and Configuration
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the GPIOx peripheral registers to their default reset values.
+ * @note By default, The GPIO pins are configured in input floating mode (except JTAG pins).
+ * @param GPIOx: where x can be (A..I) to select the GPIO peripheral.
+ * @retval None
+ */
+void GPIO_DeInit(GPIO_TypeDef* GPIOx)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ if (GPIOx == GPIOA)
+ {
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOA, ENABLE);
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOA, DISABLE);
+ }
+ else if (GPIOx == GPIOB)
+ {
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOB, ENABLE);
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOB, DISABLE);
+ }
+ else if (GPIOx == GPIOC)
+ {
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOC, ENABLE);
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOC, DISABLE);
+ }
+ else if (GPIOx == GPIOD)
+ {
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOD, ENABLE);
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOD, DISABLE);
+ }
+ else if (GPIOx == GPIOE)
+ {
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOE, ENABLE);
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOE, DISABLE);
+ }
+ else if (GPIOx == GPIOF)
+ {
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOF, ENABLE);
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOF, DISABLE);
+ }
+ else if (GPIOx == GPIOG)
+ {
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOG, ENABLE);
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOG, DISABLE);
+ }
+ else if (GPIOx == GPIOH)
+ {
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOH, ENABLE);
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOH, DISABLE);
+ }
+ else
+ {
+ if (GPIOx == GPIOI)
+ {
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOI, ENABLE);
+ RCC_AHB1PeriphResetCmd(RCC_AHB1Periph_GPIOI, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_InitStruct.
+ * @param GPIOx: where x can be (A..I) to select the GPIO peripheral.
+ * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that contains
+ * the configuration information for the specified GPIO peripheral.
+ * @retval None
+ */
+void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
+{
+ uint32_t pinpos = 0x00, pos = 0x00 , currentpin = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin));
+ assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode));
+ assert_param(IS_GPIO_PUPD(GPIO_InitStruct->GPIO_PuPd));
+
+ /* -------------------------Configure the port pins---------------- */
+ /*-- GPIO Mode Configuration --*/
+ for (pinpos = 0x00; pinpos < 0x10; pinpos++)
+ {
+ pos = ((uint32_t)0x01) << pinpos;
+ /* Get the port pins position */
+ currentpin = (GPIO_InitStruct->GPIO_Pin) & pos;
+
+ if (currentpin == pos)
+ {
+ GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (pinpos * 2));
+ GPIOx->MODER |= (((uint32_t)GPIO_InitStruct->GPIO_Mode) << (pinpos * 2));
+
+ if ((GPIO_InitStruct->GPIO_Mode == GPIO_Mode_OUT) || (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_AF))
+ {
+ /* Check Speed mode parameters */
+ assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed));
+
+ /* Speed mode configuration */
+ GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (pinpos * 2));
+ GPIOx->OSPEEDR |= ((uint32_t)(GPIO_InitStruct->GPIO_Speed) << (pinpos * 2));
+
+ /* Check Output mode parameters */
+ assert_param(IS_GPIO_OTYPE(GPIO_InitStruct->GPIO_OType));
+
+ /* Output mode configuration*/
+ GPIOx->OTYPER &= ~((GPIO_OTYPER_OT_0) << ((uint16_t)pinpos)) ;
+ GPIOx->OTYPER |= (uint16_t)(((uint16_t)GPIO_InitStruct->GPIO_OType) << ((uint16_t)pinpos));
+ }
+
+ /* Pull-up Pull down resistor configuration*/
+ GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << ((uint16_t)pinpos * 2));
+ GPIOx->PUPDR |= (((uint32_t)GPIO_InitStruct->GPIO_PuPd) << (pinpos * 2));
+ }
+ }
+}
+
+/**
+ * @brief Fills each GPIO_InitStruct member with its default value.
+ * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will be initialized.
+ * @retval None
+ */
+void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct)
+{
+ /* Reset GPIO init structure parameters values */
+ GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All;
+ GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN;
+ GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz;
+ GPIO_InitStruct->GPIO_OType = GPIO_OType_PP;
+ GPIO_InitStruct->GPIO_PuPd = GPIO_PuPd_NOPULL;
+}
+
+/**
+ * @brief Locks GPIO Pins configuration registers.
+ * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+ * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+ * @note The configuration of the locked GPIO pins can no longer be modified
+ * until the next reset.
+ * @param GPIOx: where x can be (A..I) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to be locked.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ __IO uint32_t tmp = 0x00010000;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ tmp |= GPIO_Pin;
+ /* Set LCKK bit */
+ GPIOx->LCKR = tmp;
+ /* Reset LCKK bit */
+ GPIOx->LCKR = GPIO_Pin;
+ /* Set LCKK bit */
+ GPIOx->LCKR = tmp;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+ /* Read LCKK bit*/
+ tmp = GPIOx->LCKR;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Group2 GPIO Read and Write
+ * @brief GPIO Read and Write
+ *
+@verbatim
+ ===============================================================================
+ GPIO Read and Write
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Reads the specified input port pin.
+ * @param GPIOx: where x can be (A..I) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to read.
+ * This parameter can be GPIO_Pin_x where x can be (0..15).
+ * @retval The input port pin value.
+ */
+uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ uint8_t bitstatus = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
+
+ if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET)
+ {
+ bitstatus = (uint8_t)Bit_SET;
+ }
+ else
+ {
+ bitstatus = (uint8_t)Bit_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Reads the specified GPIO input data port.
+ * @param GPIOx: where x can be (A..I) to select the GPIO peripheral.
+ * @retval GPIO input data port value.
+ */
+uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ return ((uint16_t)GPIOx->IDR);
+}
+
+/**
+ * @brief Reads the specified output data port bit.
+ * @param GPIOx: where x can be (A..I) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to read.
+ * This parameter can be GPIO_Pin_x where x can be (0..15).
+ * @retval The output port pin value.
+ */
+uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ uint8_t bitstatus = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
+
+ if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET)
+ {
+ bitstatus = (uint8_t)Bit_SET;
+ }
+ else
+ {
+ bitstatus = (uint8_t)Bit_RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Reads the specified GPIO output data port.
+ * @param GPIOx: where x can be (A..I) to select the GPIO peripheral.
+ * @retval GPIO output data port value.
+ */
+uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ return ((uint16_t)GPIOx->ODR);
+}
+
+/**
+ * @brief Sets the selected data port bits.
+ * @note This functions uses GPIOx_BSRR register to allow atomic read/modify
+ * accesses. In this way, there is no risk of an IRQ occurring between
+ * the read and the modify access.
+ * @param GPIOx: where x can be (A..I) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bits to be written.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->BSRRL = GPIO_Pin;
+}
+
+/**
+ * @brief Clears the selected data port bits.
+ * @note This functions uses GPIOx_BSRR register to allow atomic read/modify
+ * accesses. In this way, there is no risk of an IRQ occurring between
+ * the read and the modify access.
+ * @param GPIOx: where x can be (A..I) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bits to be written.
+ * This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+ * @retval None
+ */
+void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+ GPIOx->BSRRH = GPIO_Pin;
+}
+
+/**
+ * @brief Sets or clears the selected data port bit.
+ * @param GPIOx: where x can be (A..I) to select the GPIO peripheral.
+ * @param GPIO_Pin: specifies the port bit to be written.
+ * This parameter can be one of GPIO_Pin_x where x can be (0..15).
+ * @param BitVal: specifies the value to be written to the selected bit.
+ * This parameter can be one of the BitAction enum values:
+ * @arg Bit_RESET: to clear the port pin
+ * @arg Bit_SET: to set the port pin
+ * @retval None
+ */
+void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
+ assert_param(IS_GPIO_BIT_ACTION(BitVal));
+
+ if (BitVal != Bit_RESET)
+ {
+ GPIOx->BSRRL = GPIO_Pin;
+ }
+ else
+ {
+ GPIOx->BSRRH = GPIO_Pin ;
+ }
+}
+
+/**
+ * @brief Writes data to the specified GPIO data port.
+ * @param GPIOx: where x can be (A..I) to select the GPIO peripheral.
+ * @param PortVal: specifies the value to be written to the port output data register.
+ * @retval None
+ */
+void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ GPIOx->ODR = PortVal;
+}
+
+/**
+ * @brief Toggles the specified GPIO pins..
+ * @param GPIOx: where x can be (A..I) to select the GPIO peripheral.
+ * @param GPIO_Pin: Specifies the pins to be toggled.
+ * @retval None
+ */
+void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+
+ GPIOx->ODR ^= GPIO_Pin;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Group3 GPIO Alternate functions configuration function
+ * @brief GPIO Alternate functions configuration function
+ *
+@verbatim
+ ===============================================================================
+ GPIO Alternate functions configuration function
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Changes the mapping of the specified pin.
+ * @param GPIOx: where x can be (A..I) to select the GPIO peripheral.
+ * @param GPIO_PinSource: specifies the pin for the Alternate function.
+ * This parameter can be GPIO_PinSourcex where x can be (0..15).
+ * @param GPIO_AFSelection: selects the pin to used as Alternate function.
+ * This parameter can be one of the following values:
+ * @arg GPIO_AF_RTC_50Hz: Connect RTC_50Hz pin to AF0 (default after reset)
+ * @arg GPIO_AF_MCO: Connect MCO pin (MCO1 and MCO2) to AF0 (default after reset)
+ * @arg GPIO_AF_TAMPER: Connect TAMPER pins (TAMPER_1 and TAMPER_2) to AF0 (default after reset)
+ * @arg GPIO_AF_SWJ: Connect SWJ pins (SWD and JTAG)to AF0 (default after reset)
+ * @arg GPIO_AF_TRACE: Connect TRACE pins to AF0 (default after reset)
+ * @arg GPIO_AF_TIM1: Connect TIM1 pins to AF1
+ * @arg GPIO_AF_TIM2: Connect TIM2 pins to AF1
+ * @arg GPIO_AF_TIM3: Connect TIM3 pins to AF2
+ * @arg GPIO_AF_TIM4: Connect TIM4 pins to AF2
+ * @arg GPIO_AF_TIM5: Connect TIM5 pins to AF2
+ * @arg GPIO_AF_TIM8: Connect TIM8 pins to AF3
+ * @arg GPIO_AF_TIM9: Connect TIM9 pins to AF3
+ * @arg GPIO_AF_TIM10: Connect TIM10 pins to AF3
+ * @arg GPIO_AF_TIM11: Connect TIM11 pins to AF3
+ * @arg GPIO_AF_I2C1: Connect I2C1 pins to AF4
+ * @arg GPIO_AF_I2C2: Connect I2C2 pins to AF4
+ * @arg GPIO_AF_I2C3: Connect I2C3 pins to AF4
+ * @arg GPIO_AF_SPI1: Connect SPI1 pins to AF5
+ * @arg GPIO_AF_SPI2: Connect SPI2/I2S2 pins to AF5
+ * @arg GPIO_AF_SPI3: Connect SPI3/I2S3 pins to AF6
+ * @arg GPIO_AF_I2S3ext: Connect I2S3ext pins to AF7
+ * @arg GPIO_AF_USART1: Connect USART1 pins to AF7
+ * @arg GPIO_AF_USART2: Connect USART2 pins to AF7
+ * @arg GPIO_AF_USART3: Connect USART3 pins to AF7
+ * @arg GPIO_AF_UART4: Connect UART4 pins to AF8
+ * @arg GPIO_AF_UART5: Connect UART5 pins to AF8
+ * @arg GPIO_AF_USART6: Connect USART6 pins to AF8
+ * @arg GPIO_AF_CAN1: Connect CAN1 pins to AF9
+ * @arg GPIO_AF_CAN2: Connect CAN2 pins to AF9
+ * @arg GPIO_AF_TIM12: Connect TIM12 pins to AF9
+ * @arg GPIO_AF_TIM13: Connect TIM13 pins to AF9
+ * @arg GPIO_AF_TIM14: Connect TIM14 pins to AF9
+ * @arg GPIO_AF_OTG_FS: Connect OTG_FS pins to AF10
+ * @arg GPIO_AF_OTG_HS: Connect OTG_HS pins to AF10
+ * @arg GPIO_AF_ETH: Connect ETHERNET pins to AF11
+ * @arg GPIO_AF_FSMC: Connect FSMC pins to AF12
+ * @arg GPIO_AF_OTG_HS_FS: Connect OTG HS (configured in FS) pins to AF12
+ * @arg GPIO_AF_SDIO: Connect SDIO pins to AF12
+ * @arg GPIO_AF_DCMI: Connect DCMI pins to AF13
+ * @arg GPIO_AF_EVENTOUT: Connect EVENTOUT pins to AF15
+ * @retval None
+ */
+void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF)
+{
+ uint32_t temp = 0x00;
+ uint32_t temp_2 = 0x00;
+
+ /* Check the parameters */
+ assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+ assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
+ assert_param(IS_GPIO_AF(GPIO_AF));
+
+ temp = ((uint32_t)(GPIO_AF) << ((uint32_t)((uint32_t)GPIO_PinSource & (uint32_t)0x07) * 4)) ;
+ GPIOx->AFR[GPIO_PinSource >> 0x03] &= ~((uint32_t)0xF << ((uint32_t)((uint32_t)GPIO_PinSource & (uint32_t)0x07) * 4)) ;
+ temp_2 = GPIOx->AFR[GPIO_PinSource >> 0x03] | temp;
+ GPIOx->AFR[GPIO_PinSource >> 0x03] = temp_2;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff -r 4985455162fc -r 1c6281289d67 stm32f4xx_gpio.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32f4xx_gpio.h Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,407 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_gpio.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 30-September-2011
+ * @brief This file contains all the functions prototypes for the GPIO firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_GPIO_H
+#define __STM32F4xx_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
+ ((PERIPH) == GPIOB) || \
+ ((PERIPH) == GPIOC) || \
+ ((PERIPH) == GPIOD) || \
+ ((PERIPH) == GPIOE) || \
+ ((PERIPH) == GPIOF) || \
+ ((PERIPH) == GPIOG) || \
+ ((PERIPH) == GPIOH) || \
+ ((PERIPH) == GPIOI))
+
+/**
+ * @brief GPIO Configuration Mode enumeration
+ */
+typedef enum
+{
+ GPIO_Mode_IN = 0x00, /*!< GPIO Input Mode */
+ GPIO_Mode_OUT = 0x01, /*!< GPIO Output Mode */
+ GPIO_Mode_AF = 0x02, /*!< GPIO Alternate function Mode */
+ GPIO_Mode_AN = 0x03 /*!< GPIO Analog Mode */
+}GPIOMode_TypeDef;
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN) || ((MODE) == GPIO_Mode_OUT) || \
+ ((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN))
+
+/**
+ * @brief GPIO Output type enumeration
+ */
+typedef enum
+{
+ GPIO_OType_PP = 0x00,
+ GPIO_OType_OD = 0x01
+}GPIOOType_TypeDef;
+#define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD))
+
+
+/**
+ * @brief GPIO Output Maximum frequency enumeration
+ */
+typedef enum
+{
+ GPIO_Speed_2MHz = 0x00, /*!< Low speed */
+ GPIO_Speed_25MHz = 0x01, /*!< Medium speed */
+ GPIO_Speed_50MHz = 0x02, /*!< Fast speed */
+ GPIO_Speed_100MHz = 0x03 /*!< High speed on 30 pF (80 MHz Output max speed on 15 pF) */
+}GPIOSpeed_TypeDef;
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_2MHz) || ((SPEED) == GPIO_Speed_25MHz) || \
+ ((SPEED) == GPIO_Speed_50MHz)|| ((SPEED) == GPIO_Speed_100MHz))
+
+/**
+ * @brief GPIO Configuration PullUp PullDown enumeration
+ */
+typedef enum
+{
+ GPIO_PuPd_NOPULL = 0x00,
+ GPIO_PuPd_UP = 0x01,
+ GPIO_PuPd_DOWN = 0x02
+}GPIOPuPd_TypeDef;
+#define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \
+ ((PUPD) == GPIO_PuPd_DOWN))
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ Bit_RESET = 0,
+ Bit_SET
+}BitAction;
+#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
+
+
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIOMode_TypeDef */
+
+ GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIOSpeed_TypeDef */
+
+ GPIOOType_TypeDef GPIO_OType; /*!< Specifies the operating output type for the selected pins.
+ This parameter can be a value of @ref GPIOOType_TypeDef */
+
+ GPIOPuPd_TypeDef GPIO_PuPd; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
+ This parameter can be a value of @ref GPIOPuPd_TypeDef */
+}GPIO_InitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define
+ * @{
+ */
+#define GPIO_Pin_0 ((uint16_t)0x0001) /* Pin 0 selected */
+#define GPIO_Pin_1 ((uint16_t)0x0002) /* Pin 1 selected */
+#define GPIO_Pin_2 ((uint16_t)0x0004) /* Pin 2 selected */
+#define GPIO_Pin_3 ((uint16_t)0x0008) /* Pin 3 selected */
+#define GPIO_Pin_4 ((uint16_t)0x0010) /* Pin 4 selected */
+#define GPIO_Pin_5 ((uint16_t)0x0020) /* Pin 5 selected */
+#define GPIO_Pin_6 ((uint16_t)0x0040) /* Pin 6 selected */
+#define GPIO_Pin_7 ((uint16_t)0x0080) /* Pin 7 selected */
+#define GPIO_Pin_8 ((uint16_t)0x0100) /* Pin 8 selected */
+#define GPIO_Pin_9 ((uint16_t)0x0200) /* Pin 9 selected */
+#define GPIO_Pin_10 ((uint16_t)0x0400) /* Pin 10 selected */
+#define GPIO_Pin_11 ((uint16_t)0x0800) /* Pin 11 selected */
+#define GPIO_Pin_12 ((uint16_t)0x1000) /* Pin 12 selected */
+#define GPIO_Pin_13 ((uint16_t)0x2000) /* Pin 13 selected */
+#define GPIO_Pin_14 ((uint16_t)0x4000) /* Pin 14 selected */
+#define GPIO_Pin_15 ((uint16_t)0x8000) /* Pin 15 selected */
+#define GPIO_Pin_All ((uint16_t)0xFFFF) /* All pins selected */
+
+#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00))
+#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
+ ((PIN) == GPIO_Pin_1) || \
+ ((PIN) == GPIO_Pin_2) || \
+ ((PIN) == GPIO_Pin_3) || \
+ ((PIN) == GPIO_Pin_4) || \
+ ((PIN) == GPIO_Pin_5) || \
+ ((PIN) == GPIO_Pin_6) || \
+ ((PIN) == GPIO_Pin_7) || \
+ ((PIN) == GPIO_Pin_8) || \
+ ((PIN) == GPIO_Pin_9) || \
+ ((PIN) == GPIO_Pin_10) || \
+ ((PIN) == GPIO_Pin_11) || \
+ ((PIN) == GPIO_Pin_12) || \
+ ((PIN) == GPIO_Pin_13) || \
+ ((PIN) == GPIO_Pin_14) || \
+ ((PIN) == GPIO_Pin_15))
+/**
+ * @}
+ */
+
+
+/** @defgroup GPIO_Pin_sources
+ * @{
+ */
+#define GPIO_PinSource0 ((uint8_t)0x00)
+#define GPIO_PinSource1 ((uint8_t)0x01)
+#define GPIO_PinSource2 ((uint8_t)0x02)
+#define GPIO_PinSource3 ((uint8_t)0x03)
+#define GPIO_PinSource4 ((uint8_t)0x04)
+#define GPIO_PinSource5 ((uint8_t)0x05)
+#define GPIO_PinSource6 ((uint8_t)0x06)
+#define GPIO_PinSource7 ((uint8_t)0x07)
+#define GPIO_PinSource8 ((uint8_t)0x08)
+#define GPIO_PinSource9 ((uint8_t)0x09)
+#define GPIO_PinSource10 ((uint8_t)0x0A)
+#define GPIO_PinSource11 ((uint8_t)0x0B)
+#define GPIO_PinSource12 ((uint8_t)0x0C)
+#define GPIO_PinSource13 ((uint8_t)0x0D)
+#define GPIO_PinSource14 ((uint8_t)0x0E)
+#define GPIO_PinSource15 ((uint8_t)0x0F)
+
+#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
+ ((PINSOURCE) == GPIO_PinSource1) || \
+ ((PINSOURCE) == GPIO_PinSource2) || \
+ ((PINSOURCE) == GPIO_PinSource3) || \
+ ((PINSOURCE) == GPIO_PinSource4) || \
+ ((PINSOURCE) == GPIO_PinSource5) || \
+ ((PINSOURCE) == GPIO_PinSource6) || \
+ ((PINSOURCE) == GPIO_PinSource7) || \
+ ((PINSOURCE) == GPIO_PinSource8) || \
+ ((PINSOURCE) == GPIO_PinSource9) || \
+ ((PINSOURCE) == GPIO_PinSource10) || \
+ ((PINSOURCE) == GPIO_PinSource11) || \
+ ((PINSOURCE) == GPIO_PinSource12) || \
+ ((PINSOURCE) == GPIO_PinSource13) || \
+ ((PINSOURCE) == GPIO_PinSource14) || \
+ ((PINSOURCE) == GPIO_PinSource15))
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Alternat_function_selection_define
+ * @{
+ */
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF_I2S3ext ((uint8_t)0x07) /* I2S3ext Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */
+#define GPIO_AF_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_RTC_50Hz) || ((AF) == GPIO_AF_TIM14) || \
+ ((AF) == GPIO_AF_MCO) || ((AF) == GPIO_AF_TAMPER) || \
+ ((AF) == GPIO_AF_SWJ) || ((AF) == GPIO_AF_TRACE) || \
+ ((AF) == GPIO_AF_TIM1) || ((AF) == GPIO_AF_TIM2) || \
+ ((AF) == GPIO_AF_TIM3) || ((AF) == GPIO_AF_TIM4) || \
+ ((AF) == GPIO_AF_TIM5) || ((AF) == GPIO_AF_TIM8) || \
+ ((AF) == GPIO_AF_I2C1) || ((AF) == GPIO_AF_I2C2) || \
+ ((AF) == GPIO_AF_I2C3) || ((AF) == GPIO_AF_SPI1) || \
+ ((AF) == GPIO_AF_SPI2) || ((AF) == GPIO_AF_TIM13) || \
+ ((AF) == GPIO_AF_SPI3) || ((AF) == GPIO_AF_TIM14) || \
+ ((AF) == GPIO_AF_USART1) || ((AF) == GPIO_AF_USART2) || \
+ ((AF) == GPIO_AF_USART3) || ((AF) == GPIO_AF_UART4) || \
+ ((AF) == GPIO_AF_UART5) || ((AF) == GPIO_AF_USART6) || \
+ ((AF) == GPIO_AF_CAN1) || ((AF) == GPIO_AF_CAN2) || \
+ ((AF) == GPIO_AF_OTG_FS) || ((AF) == GPIO_AF_OTG_HS) || \
+ ((AF) == GPIO_AF_ETH) || ((AF) == GPIO_AF_FSMC) || \
+ ((AF) == GPIO_AF_OTG_HS_FS) || ((AF) == GPIO_AF_SDIO) || \
+ ((AF) == GPIO_AF_DCMI) || ((AF) == GPIO_AF_EVENTOUT))
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_Legacy
+ * @{
+ */
+
+#define GPIO_Mode_AIN GPIO_Mode_AN
+
+#define GPIO_AF_OTG1_FS GPIO_AF_OTG_FS
+#define GPIO_AF_OTG2_HS GPIO_AF_OTG_HS
+#define GPIO_AF_OTG2_FS GPIO_AF_OTG_HS_FS
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* Function used to set the GPIO configuration to the default reset state ****/
+void GPIO_DeInit(GPIO_TypeDef* GPIOx);
+
+/* Initialization and Configuration functions *********************************/
+void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
+void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
+void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+
+/* GPIO Read and Write functions **********************************************/
+uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
+uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
+void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
+void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
+void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+
+/* GPIO Alternate functions configuration function ****************************/
+void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_GPIO_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff -r 4985455162fc -r 1c6281289d67 stm32f4xx_rcc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32f4xx_rcc.c Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,1809 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_rcc.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 30-September-2011
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the Reset and clock control (RCC) peripheral:
+ * - Internal/external clocks, PLL, CSS and MCO configuration
+ * - System, AHB and APB busses clocks configuration
+ * - Peripheral clocks configuration
+ * - Interrupts and flags management
+ *
+ * @verbatim
+ *
+ * ===================================================================
+ * RCC specific features
+ * ===================================================================
+ *
+ * After reset the device is running from Internal High Speed oscillator
+ * (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache
+ * and I-Cache are disabled, and all peripherals are off except internal
+ * SRAM, Flash and JTAG.
+ * - There is no prescaler on High speed (AHB) and Low speed (APB) busses;
+ * all peripherals mapped on these busses are running at HSI speed.
+ * - The clock for all peripherals is switched off, except the SRAM and FLASH.
+ * - All GPIOs are in input floating state, except the JTAG pins which
+ * are assigned to be used for debug purpose.
+ *
+ * Once the device started from reset, the user application has to:
+ * - Configure the clock source to be used to drive the System clock
+ * (if the application needs higher frequency/performance)
+ * - Configure the System clock frequency and Flash settings
+ * - Configure the AHB and APB busses prescalers
+ * - Enable the clock for the peripheral(s) to be used
+ * - Configure the clock source(s) for peripherals which clocks are not
+ * derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG)
+ *
+ * @endverbatim
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_rcc.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup RCC
+ * @brief RCC driver modules
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* ------------ RCC registers bit address in the alias region ----------- */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+/* --- CR Register ---*/
+/* Alias word address of HSION bit */
+#define CR_OFFSET (RCC_OFFSET + 0x00)
+#define HSION_BitNumber 0x00
+#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4))
+/* Alias word address of CSSON bit */
+#define CSSON_BitNumber 0x13
+#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4))
+/* Alias word address of PLLON bit */
+#define PLLON_BitNumber 0x18
+#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4))
+/* Alias word address of PLLI2SON bit */
+#define PLLI2SON_BitNumber 0x1A
+#define CR_PLLI2SON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLI2SON_BitNumber * 4))
+
+/* --- CFGR Register ---*/
+/* Alias word address of I2SSRC bit */
+#define CFGR_OFFSET (RCC_OFFSET + 0x08)
+#define I2SSRC_BitNumber 0x17
+#define CFGR_I2SSRC_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (I2SSRC_BitNumber * 4))
+
+/* --- BDCR Register ---*/
+/* Alias word address of RTCEN bit */
+#define BDCR_OFFSET (RCC_OFFSET + 0x70)
+#define RTCEN_BitNumber 0x0F
+#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4))
+/* Alias word address of BDRST bit */
+#define BDRST_BitNumber 0x10
+#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4))
+/* --- CSR Register ---*/
+/* Alias word address of LSION bit */
+#define CSR_OFFSET (RCC_OFFSET + 0x74)
+#define LSION_BitNumber 0x00
+#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4))
+/* ---------------------- RCC registers bit mask ------------------------ */
+/* CFGR register bit mask */
+#define CFGR_MCO2_RESET_MASK ((uint32_t)0x07FFFFFF)
+#define CFGR_MCO1_RESET_MASK ((uint32_t)0xF89FFFFF)
+
+/* RCC Flag Mask */
+#define FLAG_MASK ((uint8_t)0x1F)
+
+/* CR register byte 3 (Bits[23:16]) base address */
+#define CR_BYTE3_ADDRESS ((uint32_t)0x40023802)
+
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x01))
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define CIR_BYTE3_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x02))
+
+/* BDCR register base address */
+#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET)
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RCC_Private_Functions
+ * @{
+ */
+
+/** @defgroup RCC_Group1 Internal and external clocks, PLL, CSS and MCO configuration functions
+ * @brief Internal and external clocks, PLL, CSS and MCO configuration functions
+ *
+@verbatim
+ ===============================================================================
+ Internal/external clocks, PLL, CSS and MCO configuration functions
+ ===============================================================================
+
+ This section provide functions allowing to configure the internal/external clocks,
+ PLLs, CSS and MCO pins.
+
+ 1. HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through
+ the PLL as System clock source.
+
+ 2. LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC
+ clock source.
+
+ 3. HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or
+ through the PLL as System clock source. Can be used also as RTC clock source.
+
+ 4. LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
+
+ 5. PLL (clocked by HSI or HSE), featuring two different output clocks:
+ - The first output is used to generate the high speed system clock (up to 168 MHz)
+ - The second output is used to generate the clock for the USB OTG FS (48 MHz),
+ the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz).
+
+ 6. PLLI2S (clocked by HSI or HSE), used to generate an accurate clock to achieve
+ high-quality audio performance on the I2S interface.
+
+ 7. CSS (Clock security system), once enable and if a HSE clock failure occurs
+ (HSE used directly or through PLL as System clock source), the System clock
+ is automatically switched to HSI and an interrupt is generated if enabled.
+ The interrupt is linked to the Cortex-M4 NMI (Non-Maskable Interrupt)
+ exception vector.
+
+ 8. MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
+ clock (through a configurable prescaler) on PA8 pin.
+
+ 9. MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S
+ clock (through a configurable prescaler) on PC9 pin.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Resets the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - HSI ON and used as system clock source
+ * - HSE, PLL and PLLI2S OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS, MCO1 and MCO2 OFF
+ * - All interrupts disabled
+ * @note This function doesn't modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @param None
+ * @retval None
+ */
+void RCC_DeInit(void)
+{
+ /* Set HSION bit */
+ RCC->CR |= (uint32_t)0x00000001;
+
+ /* Reset CFGR register */
+ RCC->CFGR = 0x00000000;
+
+ /* Reset HSEON, CSSON and PLLON bits */
+ RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+ /* Reset PLLCFGR register */
+ RCC->PLLCFGR = 0x24003010;
+
+ /* Reset HSEBYP bit */
+ RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+ /* Disable all interrupts */
+ RCC->CIR = 0x00000000;
+}
+
+/**
+ * @brief Configures the External High Speed oscillator (HSE).
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the Clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param RCC_HSE: specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg RCC_HSE_ON: turn ON the HSE oscillator
+ * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock
+ * @retval None
+ */
+void RCC_HSEConfig(uint8_t RCC_HSE)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_HSE));
+
+ /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/
+ *(__IO uint8_t *) CR_BYTE3_ADDRESS = RCC_HSE_OFF;
+
+ /* Set the new HSE configuration -------------------------------------------*/
+ *(__IO uint8_t *) CR_BYTE3_ADDRESS = RCC_HSE;
+}
+
+/**
+ * @brief Waits for HSE start-up.
+ * @note This functions waits on HSERDY flag to be set and return SUCCESS if
+ * this flag is set, otherwise returns ERROR if the timeout is reached
+ * and this flag is not set. The timeout value is defined by the constant
+ * HSE_STARTUP_TIMEOUT in stm32f4xx.h file. You can tailor it depending
+ * on the HSE crystal used in your application.
+ * @param None
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: HSE oscillator is stable and ready to use
+ * - ERROR: HSE oscillator not yet ready
+ */
+ErrorStatus RCC_WaitForHSEStartUp(void)
+{
+ __IO uint32_t startupcounter = 0;
+ ErrorStatus status = ERROR;
+ FlagStatus hsestatus = RESET;
+ /* Wait till HSE is ready and if Time out is reached exit */
+ do
+ {
+ hsestatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY);
+ startupcounter++;
+ } while((startupcounter != HSE_STARTUP_TIMEOUT) && (hsestatus == RESET));
+
+ if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET)
+ {
+ status = SUCCESS;
+ }
+ else
+ {
+ status = ERROR;
+ }
+ return (status);
+}
+
+/**
+ * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param HSICalibrationValue: specifies the calibration trimming value.
+ * This parameter must be a number between 0 and 0x1F.
+ * @retval None
+ */
+void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue)
+{
+ uint32_t tmpreg = 0;
+ /* Check the parameters */
+ assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue));
+
+ tmpreg = RCC->CR;
+
+ /* Clear HSITRIM[4:0] bits */
+ tmpreg &= ~RCC_CR_HSITRIM;
+
+ /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */
+ tmpreg |= (uint32_t)HSICalibrationValue << 3;
+
+ /* Store the new value */
+ RCC->CR = tmpreg;
+}
+
+/**
+ * @brief Enables or disables the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * @param NewState: new state of the HSI.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ * @retval None
+ */
+void RCC_HSICmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Configures the External Low Speed oscillator (LSE).
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * PWR_BackupAccessCmd(ENABLE) function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_Bypass), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param RCC_LSE: specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg RCC_LSE_ON: turn ON the LSE oscillator
+ * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock
+ * @retval None
+ */
+void RCC_LSEConfig(uint8_t RCC_LSE)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_LSE));
+
+ /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/
+ /* Reset LSEON bit */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF;
+
+ /* Reset LSEBYP bit */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF;
+
+ /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */
+ switch (RCC_LSE)
+ {
+ case RCC_LSE_ON:
+ /* Set LSEON bit */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON;
+ break;
+ case RCC_LSE_Bypass:
+ /* Set LSEBYP and LSEON bits */
+ *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON;
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * @brief Enables or disables the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ * @note LSI can not be disabled if the IWDG is running.
+ * @param NewState: new state of the LSI.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ * @retval None
+ */
+void RCC_LSICmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Configures the main PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ *
+ * @param RCC_PLLSource: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSource_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSource_HSE: HSE oscillator clock selected as PLL clock entry
+ * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+ *
+ * @param PLLM: specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between 0 and 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ *
+ * @param PLLN: specifies the multiplication factor for PLL VCO output clock
+ * This parameter must be a number between 192 and 432.
+ * @note You have to set the PLLN parameter correctly to ensure that the VCO
+ * output frequency is between 192 and 432 MHz.
+ *
+ * @param PLLP: specifies the division factor for main system clock (SYSCLK)
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ * @note You have to set the PLLP parameter correctly to not exceed 168 MHz on
+ * the System clock frequency.
+ *
+ * @param PLLQ: specifies the division factor for OTG FS, SDIO and RNG clocks
+ * This parameter must be a number between 4 and 15.
+ * @note If the USB OTG FS is used in your application, you have to set the
+ * PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+ * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
+ * correctly.
+ *
+ * @retval None
+ */
+void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP, uint32_t PLLQ)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource));
+ assert_param(IS_RCC_PLLM_VALUE(PLLM));
+ assert_param(IS_RCC_PLLN_VALUE(PLLN));
+ assert_param(IS_RCC_PLLP_VALUE(PLLP));
+ assert_param(IS_RCC_PLLQ_VALUE(PLLQ));
+
+ RCC->PLLCFGR = PLLM | (PLLN << 6) | (((PLLP >> 1) -1) << 16) | (RCC_PLLSource) |
+ (PLLQ << 24);
+}
+
+/**
+ * @brief Enables or disables the main PLL.
+ * @note After enabling the main PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The main PLL can not be disabled if it is used as system clock source
+ * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+ * @param NewState: new state of the main PLL. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_PLLCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Configures the PLLI2S clock multiplication and division factors.
+ *
+ * @note This function must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * RCC_PLLConfig function )
+ *
+ * @param PLLI2SN: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between 192 and 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between 192 and 432 MHz.
+ *
+ * @param PLLI2SR: specifies the division factor for I2S clock
+ * This parameter must be a number between 2 and 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ *
+ * @retval None
+ */
+void RCC_PLLI2SConfig(uint32_t PLLI2SN, uint32_t PLLI2SR)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_PLLI2SN_VALUE(PLLI2SN));
+ assert_param(IS_RCC_PLLI2SR_VALUE(PLLI2SR));
+
+ RCC->PLLI2SCFGR = (PLLI2SN << 6) | (PLLI2SR << 28);
+}
+
+/**
+ * @brief Enables or disables the PLLI2S.
+ * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
+ * @param NewState: new state of the PLLI2S. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_PLLI2SCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_PLLI2SON_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Enables or disables the Clock Security System.
+ * @note If a failure is detected on the HSE oscillator clock, this oscillator
+ * is automatically disabled and an interrupt is generated to inform the
+ * software about the failure (Clock Security System Interrupt, CSSI),
+ * allowing the MCU to perform rescue operations. The CSSI is linked to
+ * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector.
+ * @param NewState: new state of the Clock Security System.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_ClockSecuritySystemCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Selects the clock source to output on MCO1 pin(PA8).
+ * @note PA8 should be configured in alternate function mode.
+ * @param RCC_MCO1Source: specifies the clock source to output.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1Source_HSI: HSI clock selected as MCO1 source
+ * @arg RCC_MCO1Source_LSE: LSE clock selected as MCO1 source
+ * @arg RCC_MCO1Source_HSE: HSE clock selected as MCO1 source
+ * @arg RCC_MCO1Source_PLLCLK: main PLL clock selected as MCO1 source
+ * @param RCC_MCO1Div: specifies the MCO1 prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO1Div_1: no division applied to MCO1 clock
+ * @arg RCC_MCO1Div_2: division by 2 applied to MCO1 clock
+ * @arg RCC_MCO1Div_3: division by 3 applied to MCO1 clock
+ * @arg RCC_MCO1Div_4: division by 4 applied to MCO1 clock
+ * @arg RCC_MCO1Div_5: division by 5 applied to MCO1 clock
+ * @retval None
+ */
+void RCC_MCO1Config(uint32_t RCC_MCO1Source, uint32_t RCC_MCO1Div)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_MCO1SOURCE(RCC_MCO1Source));
+ assert_param(IS_RCC_MCO1DIV(RCC_MCO1Div));
+
+ tmpreg = RCC->CFGR;
+
+ /* Clear MCO1[1:0] and MCO1PRE[2:0] bits */
+ tmpreg &= CFGR_MCO1_RESET_MASK;
+
+ /* Select MCO1 clock source and prescaler */
+ tmpreg |= RCC_MCO1Source | RCC_MCO1Div;
+
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Selects the clock source to output on MCO2 pin(PC9).
+ * @note PC9 should be configured in alternate function mode.
+ * @param RCC_MCO2Source: specifies the clock source to output.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO2Source_SYSCLK: System clock (SYSCLK) selected as MCO2 source
+ * @arg RCC_MCO2Source_PLLI2SCLK: PLLI2S clock selected as MCO2 source
+ * @arg RCC_MCO2Source_HSE: HSE clock selected as MCO2 source
+ * @arg RCC_MCO2Source_PLLCLK: main PLL clock selected as MCO2 source
+ * @param RCC_MCO2Div: specifies the MCO2 prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO2Div_1: no division applied to MCO2 clock
+ * @arg RCC_MCO2Div_2: division by 2 applied to MCO2 clock
+ * @arg RCC_MCO2Div_3: division by 3 applied to MCO2 clock
+ * @arg RCC_MCO2Div_4: division by 4 applied to MCO2 clock
+ * @arg RCC_MCO2Div_5: division by 5 applied to MCO2 clock
+ * @retval None
+ */
+void RCC_MCO2Config(uint32_t RCC_MCO2Source, uint32_t RCC_MCO2Div)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_MCO2SOURCE(RCC_MCO2Source));
+ assert_param(IS_RCC_MCO2DIV(RCC_MCO2Div));
+
+ tmpreg = RCC->CFGR;
+
+ /* Clear MCO2 and MCO2PRE[2:0] bits */
+ tmpreg &= CFGR_MCO2_RESET_MASK;
+
+ /* Select MCO2 clock source and prescaler */
+ tmpreg |= RCC_MCO2Source | RCC_MCO2Div;
+
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Group2 System AHB and APB busses clocks configuration functions
+ * @brief System, AHB and APB busses clocks configuration functions
+ *
+@verbatim
+ ===============================================================================
+ System, AHB and APB busses clocks configuration functions
+ ===============================================================================
+
+ This section provide functions allowing to configure the System, AHB, APB1 and
+ APB2 busses clocks.
+
+ 1. Several clock sources can be used to drive the System clock (SYSCLK): HSI,
+ HSE and PLL.
+ The AHB clock (HCLK) is derived from System clock through configurable prescaler
+ and used to clock the CPU, memory and peripherals mapped on AHB bus (DMA, GPIO...).
+ APB1 (PCLK1) and APB2 (PCLK2) clocks are derived from AHB clock through
+ configurable prescalers and used to clock the peripherals mapped on these busses.
+ You can use "RCC_GetClocksFreq()" function to retrieve the frequencies of these clocks.
+
+@note All the peripheral clocks are derived from the System clock (SYSCLK) except:
+ - I2S: the I2S clock can be derived either from a specific PLL (PLLI2S) or
+ from an external clock mapped on the I2S_CKIN pin.
+ You have to use RCC_I2SCLKConfig() function to configure this clock.
+ - RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock
+ divided by 2 to 31. You have to use RCC_RTCCLKConfig() and RCC_RTCCLKCmd()
+ functions to configure this clock.
+ - USB OTG FS, SDIO and RTC: USB OTG FS require a frequency equal to 48 MHz
+ to work correctly, while the SDIO require a frequency equal or lower than
+ to 48. This clock is derived of the main PLL through PLLQ divider.
+ - IWDG clock which is always the LSI clock.
+
+ 2. The maximum frequency of the SYSCLK and HCLK is 168 MHz, PCLK2 82 MHz and PCLK1 42 MHz.
+ Depending on the device voltage range, the maximum frequency should be
+ adapted accordingly:
+ +-------------------------------------------------------------------------------------+
+ | Latency | HCLK clock frequency (MHz) |
+ | |---------------------------------------------------------------------|
+ | | voltage range | voltage range | voltage range | voltage range |
+ | | 2.7 V - 3.6 V | 2.4 V - 2.7 V | 2.1 V - 2.4 V | 1.8 V - 2.1 V |
+ |---------------|----------------|----------------|-----------------|-----------------|
+ |0WS(1CPU cycle)|0 < HCLK <= 30 |0 < HCLK <= 24 |0 < HCLK <= 18 |0 < HCLK <= 16 |
+ |---------------|----------------|----------------|-----------------|-----------------|
+ |1WS(2CPU cycle)|30 < HCLK <= 60 |24 < HCLK <= 48 |18 < HCLK <= 36 |16 < HCLK <= 32 |
+ |---------------|----------------|----------------|-----------------|-----------------|
+ |2WS(3CPU cycle)|60 < HCLK <= 90 |48 < HCLK <= 72 |36 < HCLK <= 54 |32 < HCLK <= 48 |
+ |---------------|----------------|----------------|-----------------|-----------------|
+ |3WS(4CPU cycle)|90 < HCLK <= 120|72 < HCLK <= 96 |54 < HCLK <= 72 |48 < HCLK <= 64 |
+ |---------------|----------------|----------------|-----------------|-----------------|
+ |4WS(5CPU cycle)|120< HCLK <= 150|96 < HCLK <= 120|72 < HCLK <= 90 |64 < HCLK <= 80 |
+ |---------------|----------------|----------------|-----------------|-----------------|
+ |5WS(6CPU cycle)|120< HCLK <= 168|120< HCLK <= 144|90 < HCLK <= 108 |80 < HCLK <= 96 |
+ |---------------|----------------|----------------|-----------------|-----------------|
+ |6WS(7CPU cycle)| NA |144< HCLK <= 168|108 < HCLK <= 120|96 < HCLK <= 112 |
+ |---------------|----------------|----------------|-----------------|-----------------|
+ |7WS(8CPU cycle)| NA | NA |120 < HCLK <= 138|112 < HCLK <= 120|
+ +-------------------------------------------------------------------------------------+
+ @note When VOS bit (in PWR_CR register) is reset to '0, the maximum value of HCLK is 144 MHz.
+ You can use PWR_MainRegulatorModeConfig() function to set or reset this bit.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the system clock (SYSCLK).
+ * @note The HSI is used (enabled by hardware) as system clock source after
+ * startup from Reset, wake-up from STOP and STANDBY mode, or in case
+ * of failure of the HSE used directly or indirectly as system clock
+ * (if the Clock Security System CSS is enabled).
+ * @note A switch from one clock source to another occurs only if the target
+ * clock source is ready (clock stable after startup delay or PLL locked).
+ * If a clock source which is not yet ready is selected, the switch will
+ * occur when the clock source will be ready.
+ * You can use RCC_GetSYSCLKSource() function to know which clock is
+ * currently used as system clock source.
+ * @param RCC_SYSCLKSource: specifies the clock source used as system clock.
+ * This parameter can be one of the following values:
+ * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock source
+ * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock source
+ * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock source
+ * @retval None
+ */
+void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource));
+
+ tmpreg = RCC->CFGR;
+
+ /* Clear SW[1:0] bits */
+ tmpreg &= ~RCC_CFGR_SW;
+
+ /* Set SW[1:0] bits according to RCC_SYSCLKSource value */
+ tmpreg |= RCC_SYSCLKSource;
+
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Returns the clock source used as system clock.
+ * @param None
+ * @retval The clock source used as system clock. The returned value can be one
+ * of the following:
+ * - 0x00: HSI used as system clock
+ * - 0x04: HSE used as system clock
+ * - 0x08: PLL used as system clock
+ */
+uint8_t RCC_GetSYSCLKSource(void)
+{
+ return ((uint8_t)(RCC->CFGR & RCC_CFGR_SWS));
+}
+
+/**
+ * @brief Configures the AHB clock (HCLK).
+ * @note Depending on the device voltage range, the software has to set correctly
+ * these bits to ensure that HCLK not exceed the maximum allowed frequency
+ * (for more details refer to section above
+ * "CPU, AHB and APB busses clocks configuration functions")
+ * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from
+ * the system clock (SYSCLK).
+ * This parameter can be one of the following values:
+ * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK
+ * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2
+ * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4
+ * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8
+ * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16
+ * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64
+ * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128
+ * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256
+ * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512
+ * @retval None
+ */
+void RCC_HCLKConfig(uint32_t RCC_SYSCLK)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_HCLK(RCC_SYSCLK));
+
+ tmpreg = RCC->CFGR;
+
+ /* Clear HPRE[3:0] bits */
+ tmpreg &= ~RCC_CFGR_HPRE;
+
+ /* Set HPRE[3:0] bits according to RCC_SYSCLK value */
+ tmpreg |= RCC_SYSCLK;
+
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+
+/**
+ * @brief Configures the Low Speed APB clock (PCLK1).
+ * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from
+ * the AHB clock (HCLK).
+ * This parameter can be one of the following values:
+ * @arg RCC_HCLK_Div1: APB1 clock = HCLK
+ * @arg RCC_HCLK_Div2: APB1 clock = HCLK/2
+ * @arg RCC_HCLK_Div4: APB1 clock = HCLK/4
+ * @arg RCC_HCLK_Div8: APB1 clock = HCLK/8
+ * @arg RCC_HCLK_Div16: APB1 clock = HCLK/16
+ * @retval None
+ */
+void RCC_PCLK1Config(uint32_t RCC_HCLK)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PCLK(RCC_HCLK));
+
+ tmpreg = RCC->CFGR;
+
+ /* Clear PPRE1[2:0] bits */
+ tmpreg &= ~RCC_CFGR_PPRE1;
+
+ /* Set PPRE1[2:0] bits according to RCC_HCLK value */
+ tmpreg |= RCC_HCLK;
+
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Configures the High Speed APB clock (PCLK2).
+ * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from
+ * the AHB clock (HCLK).
+ * This parameter can be one of the following values:
+ * @arg RCC_HCLK_Div1: APB2 clock = HCLK
+ * @arg RCC_HCLK_Div2: APB2 clock = HCLK/2
+ * @arg RCC_HCLK_Div4: APB2 clock = HCLK/4
+ * @arg RCC_HCLK_Div8: APB2 clock = HCLK/8
+ * @arg RCC_HCLK_Div16: APB2 clock = HCLK/16
+ * @retval None
+ */
+void RCC_PCLK2Config(uint32_t RCC_HCLK)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_PCLK(RCC_HCLK));
+
+ tmpreg = RCC->CFGR;
+
+ /* Clear PPRE2[2:0] bits */
+ tmpreg &= ~RCC_CFGR_PPRE2;
+
+ /* Set PPRE2[2:0] bits according to RCC_HCLK value */
+ tmpreg |= RCC_HCLK << 3;
+
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+}
+
+/**
+ * @brief Returns the frequencies of different on chip clocks; SYSCLK, HCLK,
+ * PCLK1 and PCLK2.
+ *
+ * @note The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+ * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
+ * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**)
+ * or HSI_VALUE(*) multiplied/divided by the PLL factors.
+ * @note (*) HSI_VALUE is a constant defined in stm32f4xx.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ * @note (**) HSE_VALUE is a constant defined in stm32f4xx.h file (default value
+ * 25 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * @note The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold
+ * the clocks frequencies.
+ *
+ * @note This function can be used by the user application to compute the
+ * baudrate for the communication peripherals or configure other parameters.
+ * @note Each time SYSCLK, HCLK, PCLK1 and/or PCLK2 clock changes, this function
+ * must be called to update the structure's field. Otherwise, any
+ * configuration based on this function will be incorrect.
+ *
+ * @retval None
+ */
+void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks)
+{
+ uint32_t tmp = 0, presc = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+ switch (tmp)
+ {
+ case 0x00: /* HSI used as system clock source */
+ RCC_Clocks->SYSCLK_Frequency = HSI_VALUE;
+ break;
+ case 0x04: /* HSE used as system clock source */
+ RCC_Clocks->SYSCLK_Frequency = HSE_VALUE;
+ break;
+ case 0x08: /* PLL used as system clock source */
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLP
+ */
+ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+ pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+ if (pllsource != 0)
+ {
+ /* HSE used as PLL clock source */
+ pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+ else
+ {
+ /* HSI used as PLL clock source */
+ pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+ }
+
+ pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+ RCC_Clocks->SYSCLK_Frequency = pllvco/pllp;
+ break;
+ default:
+ RCC_Clocks->SYSCLK_Frequency = HSI_VALUE;
+ break;
+ }
+ /* Compute HCLK, PCLK1 and PCLK2 clocks frequencies ------------------------*/
+
+ /* Get HCLK prescaler */
+ tmp = RCC->CFGR & RCC_CFGR_HPRE;
+ tmp = tmp >> 4;
+ presc = APBAHBPrescTable[tmp];
+ /* HCLK clock frequency */
+ RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc;
+
+ /* Get PCLK1 prescaler */
+ tmp = RCC->CFGR & RCC_CFGR_PPRE1;
+ tmp = tmp >> 10;
+ presc = APBAHBPrescTable[tmp];
+ /* PCLK1 clock frequency */
+ RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc;
+
+ /* Get PCLK2 prescaler */
+ tmp = RCC->CFGR & RCC_CFGR_PPRE2;
+ tmp = tmp >> 13;
+ presc = APBAHBPrescTable[tmp];
+ /* PCLK2 clock frequency */
+ RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Group3 Peripheral clocks configuration functions
+ * @brief Peripheral clocks configuration functions
+ *
+@verbatim
+ ===============================================================================
+ Peripheral clocks configuration functions
+ ===============================================================================
+
+ This section provide functions allowing to configure the Peripheral clocks.
+
+ 1. The RTC clock which is derived from the LSI, LSE or HSE clock divided by 2 to 31.
+
+ 2. After restart from Reset or wakeup from STANDBY, all peripherals are off
+ except internal SRAM, Flash and JTAG. Before to start using a peripheral you
+ have to enable its interface clock. You can do this using RCC_AHBPeriphClockCmd()
+ , RCC_APB2PeriphClockCmd() and RCC_APB1PeriphClockCmd() functions.
+
+ 3. To reset the peripherals configuration (to the default state after device reset)
+ you can use RCC_AHBPeriphResetCmd(), RCC_APB2PeriphResetCmd() and
+ RCC_APB1PeriphResetCmd() functions.
+
+ 4. To further reduce power consumption in SLEEP mode the peripheral clocks can
+ be disabled prior to executing the WFI or WFE instructions. You can do this
+ using RCC_AHBPeriphClockLPModeCmd(), RCC_APB2PeriphClockLPModeCmd() and
+ RCC_APB1PeriphClockLPModeCmd() functions.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using PWR_BackupAccessCmd(ENABLE) function before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it can't be changed unless the
+ * Backup domain is reset using RCC_BackupResetCmd() function, or by
+ * a Power On Reset (POR).
+ *
+ * @param RCC_RTCCLKSource: specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock
+ * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock
+ * @arg RCC_RTCCLKSource_HSE_Divx: HSE clock divided by x selected
+ * as RTC clock, where x:[2,31]
+ *
+ * @note If the LSE or LSI is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wakeup source.
+ * However, when the HSE clock is used as RTC clock source, the RTC
+ * cannot be used in STOP and STANDBY modes.
+ * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as
+ * RTC clock source).
+ *
+ * @retval None
+ */
+void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource)
+{
+ uint32_t tmpreg = 0;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource));
+
+ if ((RCC_RTCCLKSource & 0x00000300) == 0x00000300)
+ { /* If HSE is selected as RTC clock source, configure HSE division factor for RTC clock */
+ tmpreg = RCC->CFGR;
+
+ /* Clear RTCPRE[4:0] bits */
+ tmpreg &= ~RCC_CFGR_RTCPRE;
+
+ /* Configure HSE division factor for RTC clock */
+ tmpreg |= (RCC_RTCCLKSource & 0xFFFFCFF);
+
+ /* Store the new value */
+ RCC->CFGR = tmpreg;
+ }
+
+ /* Select the RTC clock source */
+ RCC->BDCR |= (RCC_RTCCLKSource & 0x00000FFF);
+}
+
+/**
+ * @brief Enables or disables the RTC clock.
+ * @note This function must be used only after the RTC clock source was selected
+ * using the RCC_RTCCLKConfig function.
+ * @param NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_RTCCLKCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Forces or releases the Backup domain reset.
+ * @note This function resets the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_CSR register.
+ * @note The BKPSRAM is not affected by this reset.
+ * @param NewState: new state of the Backup domain reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_BackupResetCmd(FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState;
+}
+
+/**
+ * @brief Configures the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param RCC_I2SCLKSource: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2S2CLKSource_PLLI2S: PLLI2S clock used as I2S clock source
+ * @arg RCC_I2S2CLKSource_Ext: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ * @retval None
+ */
+void RCC_I2SCLKConfig(uint32_t RCC_I2SCLKSource)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_I2SCLK_SOURCE(RCC_I2SCLKSource));
+
+ *(__IO uint32_t *) CFGR_I2SSRC_BB = RCC_I2SCLKSource;
+}
+
+/**
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @param RCC_AHBPeriph: specifies the AHB1 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_AHB1Periph_GPIOA: GPIOA clock
+ * @arg RCC_AHB1Periph_GPIOB: GPIOB clock
+ * @arg RCC_AHB1Periph_GPIOC: GPIOC clock
+ * @arg RCC_AHB1Periph_GPIOD: GPIOD clock
+ * @arg RCC_AHB1Periph_GPIOE: GPIOE clock
+ * @arg RCC_AHB1Periph_GPIOF: GPIOF clock
+ * @arg RCC_AHB1Periph_GPIOG: GPIOG clock
+ * @arg RCC_AHB1Periph_GPIOG: GPIOG clock
+ * @arg RCC_AHB1Periph_GPIOI: GPIOI clock
+ * @arg RCC_AHB1Periph_CRC: CRC clock
+ * @arg RCC_AHB1Periph_BKPSRAM: BKPSRAM interface clock
+ * @arg RCC_AHB1Periph_CCMDATARAMEN CCM data RAM interface clock
+ * @arg RCC_AHB1Periph_DMA1: DMA1 clock
+ * @arg RCC_AHB1Periph_DMA2: DMA2 clock
+ * @arg RCC_AHB1Periph_ETH_MAC: Ethernet MAC clock
+ * @arg RCC_AHB1Periph_ETH_MAC_Tx: Ethernet Transmission clock
+ * @arg RCC_AHB1Periph_ETH_MAC_Rx: Ethernet Reception clock
+ * @arg RCC_AHB1Periph_ETH_MAC_PTP: Ethernet PTP clock
+ * @arg RCC_AHB1Periph_OTG_HS: USB OTG HS clock
+ * @arg RCC_AHB1Periph_OTG_HS_ULPI: USB OTG HS ULPI clock
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHB1PeriphClockCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB1_CLOCK_PERIPH(RCC_AHB1Periph));
+
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->AHB1ENR |= RCC_AHB1Periph;
+ }
+ else
+ {
+ RCC->AHB1ENR &= ~RCC_AHB1Periph;
+ }
+}
+
+/**
+ * @brief Enables or disables the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @param RCC_AHBPeriph: specifies the AHB2 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_AHB2Periph_DCMI: DCMI clock
+ * @arg RCC_AHB2Periph_CRYP: CRYP clock
+ * @arg RCC_AHB2Periph_HASH: HASH clock
+ * @arg RCC_AHB2Periph_RNG: RNG clock
+ * @arg RCC_AHB2Periph_OTG_FS: USB OTG FS clock
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHB2PeriphClockCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB2_PERIPH(RCC_AHB2Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RCC->AHB2ENR |= RCC_AHB2Periph;
+ }
+ else
+ {
+ RCC->AHB2ENR &= ~RCC_AHB2Periph;
+ }
+}
+
+/**
+ * @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @param RCC_AHBPeriph: specifies the AHB3 peripheral to gates its clock.
+ * This parameter must be: RCC_AHB3Periph_FSMC
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHB3PeriphClockCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB3_PERIPH(RCC_AHB3Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RCC->AHB3ENR |= RCC_AHB3Periph;
+ }
+ else
+ {
+ RCC->AHB3ENR &= ~RCC_AHB3Periph;
+ }
+}
+
+/**
+ * @brief Enables or disables the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB1Periph_TIM2: TIM2 clock
+ * @arg RCC_APB1Periph_TIM3: TIM3 clock
+ * @arg RCC_APB1Periph_TIM4: TIM4 clock
+ * @arg RCC_APB1Periph_TIM5: TIM5 clock
+ * @arg RCC_APB1Periph_TIM6: TIM6 clock
+ * @arg RCC_APB1Periph_TIM7: TIM7 clock
+ * @arg RCC_APB1Periph_TIM12: TIM12 clock
+ * @arg RCC_APB1Periph_TIM13: TIM13 clock
+ * @arg RCC_APB1Periph_TIM14: TIM14 clock
+ * @arg RCC_APB1Periph_WWDG: WWDG clock
+ * @arg RCC_APB1Periph_SPI2: SPI2 clock
+ * @arg RCC_APB1Periph_SPI3: SPI3 clock
+ * @arg RCC_APB1Periph_USART2: USART2 clock
+ * @arg RCC_APB1Periph_USART3: USART3 clock
+ * @arg RCC_APB1Periph_UART4: UART4 clock
+ * @arg RCC_APB1Periph_UART5: UART5 clock
+ * @arg RCC_APB1Periph_I2C1: I2C1 clock
+ * @arg RCC_APB1Periph_I2C2: I2C2 clock
+ * @arg RCC_APB1Periph_I2C3: I2C3 clock
+ * @arg RCC_APB1Periph_CAN1: CAN1 clock
+ * @arg RCC_APB1Periph_CAN2: CAN2 clock
+ * @arg RCC_APB1Periph_PWR: PWR clock
+ * @arg RCC_APB1Periph_DAC: DAC clock
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RCC->APB1ENR |= RCC_APB1Periph;
+ }
+ else
+ {
+ RCC->APB1ENR &= ~RCC_APB1Periph;
+ }
+}
+
+/**
+ * @brief Enables or disables the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB2Periph_TIM1: TIM1 clock
+ * @arg RCC_APB2Periph_TIM8: TIM8 clock
+ * @arg RCC_APB2Periph_USART1: USART1 clock
+ * @arg RCC_APB2Periph_USART6: USART6 clock
+ * @arg RCC_APB2Periph_ADC1: ADC1 clock
+ * @arg RCC_APB2Periph_ADC2: ADC2 clock
+ * @arg RCC_APB2Periph_ADC3: ADC3 clock
+ * @arg RCC_APB2Periph_SDIO: SDIO clock
+ * @arg RCC_APB2Periph_SPI1: SPI1 clock
+ * @arg RCC_APB2Periph_SYSCFG: SYSCFG clock
+ * @arg RCC_APB2Periph_TIM9: TIM9 clock
+ * @arg RCC_APB2Periph_TIM10: TIM10 clock
+ * @arg RCC_APB2Periph_TIM11: TIM11 clock
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RCC->APB2ENR |= RCC_APB2Periph;
+ }
+ else
+ {
+ RCC->APB2ENR &= ~RCC_APB2Periph;
+ }
+}
+
+/**
+ * @brief Forces or releases AHB1 peripheral reset.
+ * @param RCC_AHB1Periph: specifies the AHB1 peripheral to reset.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_AHB1Periph_GPIOA: GPIOA clock
+ * @arg RCC_AHB1Periph_GPIOB: GPIOB clock
+ * @arg RCC_AHB1Periph_GPIOC: GPIOC clock
+ * @arg RCC_AHB1Periph_GPIOD: GPIOD clock
+ * @arg RCC_AHB1Periph_GPIOE: GPIOE clock
+ * @arg RCC_AHB1Periph_GPIOF: GPIOF clock
+ * @arg RCC_AHB1Periph_GPIOG: GPIOG clock
+ * @arg RCC_AHB1Periph_GPIOG: GPIOG clock
+ * @arg RCC_AHB1Periph_GPIOI: GPIOI clock
+ * @arg RCC_AHB1Periph_CRC: CRC clock
+ * @arg RCC_AHB1Periph_DMA1: DMA1 clock
+ * @arg RCC_AHB1Periph_DMA2: DMA2 clock
+ * @arg RCC_AHB1Periph_ETH_MAC: Ethernet MAC clock
+ * @arg RCC_AHB1Periph_OTG_HS: USB OTG HS clock
+ *
+ * @param NewState: new state of the specified peripheral reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHB1PeriphResetCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB1_RESET_PERIPH(RCC_AHB1Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RCC->AHB1RSTR |= RCC_AHB1Periph;
+ }
+ else
+ {
+ RCC->AHB1RSTR &= ~RCC_AHB1Periph;
+ }
+}
+
+/**
+ * @brief Forces or releases AHB2 peripheral reset.
+ * @param RCC_AHB2Periph: specifies the AHB2 peripheral to reset.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_AHB2Periph_DCMI: DCMI clock
+ * @arg RCC_AHB2Periph_CRYP: CRYP clock
+ * @arg RCC_AHB2Periph_HASH: HASH clock
+ * @arg RCC_AHB2Periph_RNG: RNG clock
+ * @arg RCC_AHB2Periph_OTG_FS: USB OTG FS clock
+ * @param NewState: new state of the specified peripheral reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHB2PeriphResetCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB2_PERIPH(RCC_AHB2Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RCC->AHB2RSTR |= RCC_AHB2Periph;
+ }
+ else
+ {
+ RCC->AHB2RSTR &= ~RCC_AHB2Periph;
+ }
+}
+
+/**
+ * @brief Forces or releases AHB3 peripheral reset.
+ * @param RCC_AHB3Periph: specifies the AHB3 peripheral to reset.
+ * This parameter must be: RCC_AHB3Periph_FSMC
+ * @param NewState: new state of the specified peripheral reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHB3PeriphResetCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB3_PERIPH(RCC_AHB3Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ RCC->AHB3RSTR |= RCC_AHB3Periph;
+ }
+ else
+ {
+ RCC->AHB3RSTR &= ~RCC_AHB3Periph;
+ }
+}
+
+/**
+ * @brief Forces or releases Low Speed APB (APB1) peripheral reset.
+ * @param RCC_APB1Periph: specifies the APB1 peripheral to reset.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB1Periph_TIM2: TIM2 clock
+ * @arg RCC_APB1Periph_TIM3: TIM3 clock
+ * @arg RCC_APB1Periph_TIM4: TIM4 clock
+ * @arg RCC_APB1Periph_TIM5: TIM5 clock
+ * @arg RCC_APB1Periph_TIM6: TIM6 clock
+ * @arg RCC_APB1Periph_TIM7: TIM7 clock
+ * @arg RCC_APB1Periph_TIM12: TIM12 clock
+ * @arg RCC_APB1Periph_TIM13: TIM13 clock
+ * @arg RCC_APB1Periph_TIM14: TIM14 clock
+ * @arg RCC_APB1Periph_WWDG: WWDG clock
+ * @arg RCC_APB1Periph_SPI2: SPI2 clock
+ * @arg RCC_APB1Periph_SPI3: SPI3 clock
+ * @arg RCC_APB1Periph_USART2: USART2 clock
+ * @arg RCC_APB1Periph_USART3: USART3 clock
+ * @arg RCC_APB1Periph_UART4: UART4 clock
+ * @arg RCC_APB1Periph_UART5: UART5 clock
+ * @arg RCC_APB1Periph_I2C1: I2C1 clock
+ * @arg RCC_APB1Periph_I2C2: I2C2 clock
+ * @arg RCC_APB1Periph_I2C3: I2C3 clock
+ * @arg RCC_APB1Periph_CAN1: CAN1 clock
+ * @arg RCC_APB1Periph_CAN2: CAN2 clock
+ * @arg RCC_APB1Periph_PWR: PWR clock
+ * @arg RCC_APB1Periph_DAC: DAC clock
+ * @param NewState: new state of the specified peripheral reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB1RSTR |= RCC_APB1Periph;
+ }
+ else
+ {
+ RCC->APB1RSTR &= ~RCC_APB1Periph;
+ }
+}
+
+/**
+ * @brief Forces or releases High Speed APB (APB2) peripheral reset.
+ * @param RCC_APB2Periph: specifies the APB2 peripheral to reset.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB2Periph_TIM1: TIM1 clock
+ * @arg RCC_APB2Periph_TIM8: TIM8 clock
+ * @arg RCC_APB2Periph_USART1: USART1 clock
+ * @arg RCC_APB2Periph_USART6: USART6 clock
+ * @arg RCC_APB2Periph_ADC1: ADC1 clock
+ * @arg RCC_APB2Periph_ADC2: ADC2 clock
+ * @arg RCC_APB2Periph_ADC3: ADC3 clock
+ * @arg RCC_APB2Periph_SDIO: SDIO clock
+ * @arg RCC_APB2Periph_SPI1: SPI1 clock
+ * @arg RCC_APB2Periph_SYSCFG: SYSCFG clock
+ * @arg RCC_APB2Periph_TIM9: TIM9 clock
+ * @arg RCC_APB2Periph_TIM10: TIM10 clock
+ * @arg RCC_APB2Periph_TIM11: TIM11 clock
+ * @param NewState: new state of the specified peripheral reset.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB2_RESET_PERIPH(RCC_APB2Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB2RSTR |= RCC_APB2Periph;
+ }
+ else
+ {
+ RCC->APB2RSTR &= ~RCC_APB2Periph;
+ }
+}
+
+/**
+ * @brief Enables or disables the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @param RCC_AHBPeriph: specifies the AHB1 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_AHB1Periph_GPIOA: GPIOA clock
+ * @arg RCC_AHB1Periph_GPIOB: GPIOB clock
+ * @arg RCC_AHB1Periph_GPIOC: GPIOC clock
+ * @arg RCC_AHB1Periph_GPIOD: GPIOD clock
+ * @arg RCC_AHB1Periph_GPIOE: GPIOE clock
+ * @arg RCC_AHB1Periph_GPIOF: GPIOF clock
+ * @arg RCC_AHB1Periph_GPIOG: GPIOG clock
+ * @arg RCC_AHB1Periph_GPIOG: GPIOG clock
+ * @arg RCC_AHB1Periph_GPIOI: GPIOI clock
+ * @arg RCC_AHB1Periph_CRC: CRC clock
+ * @arg RCC_AHB1Periph_BKPSRAM: BKPSRAM interface clock
+ * @arg RCC_AHB1Periph_DMA1: DMA1 clock
+ * @arg RCC_AHB1Periph_DMA2: DMA2 clock
+ * @arg RCC_AHB1Periph_ETH_MAC: Ethernet MAC clock
+ * @arg RCC_AHB1Periph_ETH_MAC_Tx: Ethernet Transmission clock
+ * @arg RCC_AHB1Periph_ETH_MAC_Rx: Ethernet Reception clock
+ * @arg RCC_AHB1Periph_ETH_MAC_PTP: Ethernet PTP clock
+ * @arg RCC_AHB1Periph_OTG_HS: USB OTG HS clock
+ * @arg RCC_AHB1Periph_OTG_HS_ULPI: USB OTG HS ULPI clock
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHB1PeriphClockLPModeCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB1_LPMODE_PERIPH(RCC_AHB1Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->AHB1LPENR |= RCC_AHB1Periph;
+ }
+ else
+ {
+ RCC->AHB1LPENR &= ~RCC_AHB1Periph;
+ }
+}
+
+/**
+ * @brief Enables or disables the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @param RCC_AHBPeriph: specifies the AHB2 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_AHB2Periph_DCMI: DCMI clock
+ * @arg RCC_AHB2Periph_CRYP: CRYP clock
+ * @arg RCC_AHB2Periph_HASH: HASH clock
+ * @arg RCC_AHB2Periph_RNG: RNG clock
+ * @arg RCC_AHB2Periph_OTG_FS: USB OTG FS clock
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHB2PeriphClockLPModeCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB2_PERIPH(RCC_AHB2Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->AHB2LPENR |= RCC_AHB2Periph;
+ }
+ else
+ {
+ RCC->AHB2LPENR &= ~RCC_AHB2Periph;
+ }
+}
+
+/**
+ * @brief Enables or disables the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @param RCC_AHBPeriph: specifies the AHB3 peripheral to gates its clock.
+ * This parameter must be: RCC_AHB3Periph_FSMC
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_AHB3PeriphClockLPModeCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_AHB3_PERIPH(RCC_AHB3Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->AHB3LPENR |= RCC_AHB3Periph;
+ }
+ else
+ {
+ RCC->AHB3LPENR &= ~RCC_AHB3Periph;
+ }
+}
+
+/**
+ * @brief Enables or disables the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB1Periph_TIM2: TIM2 clock
+ * @arg RCC_APB1Periph_TIM3: TIM3 clock
+ * @arg RCC_APB1Periph_TIM4: TIM4 clock
+ * @arg RCC_APB1Periph_TIM5: TIM5 clock
+ * @arg RCC_APB1Periph_TIM6: TIM6 clock
+ * @arg RCC_APB1Periph_TIM7: TIM7 clock
+ * @arg RCC_APB1Periph_TIM12: TIM12 clock
+ * @arg RCC_APB1Periph_TIM13: TIM13 clock
+ * @arg RCC_APB1Periph_TIM14: TIM14 clock
+ * @arg RCC_APB1Periph_WWDG: WWDG clock
+ * @arg RCC_APB1Periph_SPI2: SPI2 clock
+ * @arg RCC_APB1Periph_SPI3: SPI3 clock
+ * @arg RCC_APB1Periph_USART2: USART2 clock
+ * @arg RCC_APB1Periph_USART3: USART3 clock
+ * @arg RCC_APB1Periph_UART4: UART4 clock
+ * @arg RCC_APB1Periph_UART5: UART5 clock
+ * @arg RCC_APB1Periph_I2C1: I2C1 clock
+ * @arg RCC_APB1Periph_I2C2: I2C2 clock
+ * @arg RCC_APB1Periph_I2C3: I2C3 clock
+ * @arg RCC_APB1Periph_CAN1: CAN1 clock
+ * @arg RCC_APB1Periph_CAN2: CAN2 clock
+ * @arg RCC_APB1Periph_PWR: PWR clock
+ * @arg RCC_APB1Periph_DAC: DAC clock
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB1PeriphClockLPModeCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB1LPENR |= RCC_APB1Periph;
+ }
+ else
+ {
+ RCC->APB1LPENR &= ~RCC_APB1Periph;
+ }
+}
+
+/**
+ * @brief Enables or disables the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_APB2Periph_TIM1: TIM1 clock
+ * @arg RCC_APB2Periph_TIM8: TIM8 clock
+ * @arg RCC_APB2Periph_USART1: USART1 clock
+ * @arg RCC_APB2Periph_USART6: USART6 clock
+ * @arg RCC_APB2Periph_ADC1: ADC1 clock
+ * @arg RCC_APB2Periph_ADC2: ADC2 clock
+ * @arg RCC_APB2Periph_ADC3: ADC3 clock
+ * @arg RCC_APB2Periph_SDIO: SDIO clock
+ * @arg RCC_APB2Periph_SPI1: SPI1 clock
+ * @arg RCC_APB2Periph_SYSCFG: SYSCFG clock
+ * @arg RCC_APB2Periph_TIM9: TIM9 clock
+ * @arg RCC_APB2Periph_TIM10: TIM10 clock
+ * @arg RCC_APB2Periph_TIM11: TIM11 clock
+ * @param NewState: new state of the specified peripheral clock.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_APB2PeriphClockLPModeCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ RCC->APB2LPENR |= RCC_APB2Periph;
+ }
+ else
+ {
+ RCC->APB2LPENR &= ~RCC_APB2Periph;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Group4 Interrupts and flags management functions
+ * @brief Interrupts and flags management functions
+ *
+@verbatim
+ ===============================================================================
+ Interrupts and flags management functions
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables or disables the specified RCC interrupts.
+ * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: main PLL ready interrupt
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt
+ * @param NewState: new state of the specified RCC interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_IT(RCC_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Perform Byte access to RCC_CIR[14:8] bits to enable the selected interrupts */
+ *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT;
+ }
+ else
+ {
+ /* Perform Byte access to RCC_CIR[14:8] bits to disable the selected interrupts */
+ *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT;
+ }
+}
+
+/**
+ * @brief Checks whether the specified RCC flag is set or not.
+ * @param RCC_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
+ * @arg RCC_FLAG_PLLRDY: main PLL clock ready
+ * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
+ * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset
+ * @arg RCC_FLAG_PINRST: Pin reset
+ * @arg RCC_FLAG_PORRST: POR/PDR reset
+ * @arg RCC_FLAG_SFTRST: Software reset
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset
+ * @arg RCC_FLAG_LPWRRST: Low Power reset
+ * @retval The new state of RCC_FLAG (SET or RESET).
+ */
+FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG)
+{
+ uint32_t tmp = 0;
+ uint32_t statusreg = 0;
+ FlagStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_FLAG(RCC_FLAG));
+
+ /* Get the RCC register index */
+ tmp = RCC_FLAG >> 5;
+ if (tmp == 1) /* The flag to check is in CR register */
+ {
+ statusreg = RCC->CR;
+ }
+ else if (tmp == 2) /* The flag to check is in BDCR register */
+ {
+ statusreg = RCC->BDCR;
+ }
+ else /* The flag to check is in CSR register */
+ {
+ statusreg = RCC->CSR;
+ }
+
+ /* Get the flag position */
+ tmp = RCC_FLAG & FLAG_MASK;
+ if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the flag status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RCC reset flags.
+ * The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
+ * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
+ * @param None
+ * @retval None
+ */
+void RCC_ClearFlag(void)
+{
+ /* Set RMVF bit to clear the reset flags */
+ RCC->CSR |= RCC_CSR_RMVF;
+}
+
+/**
+ * @brief Checks whether the specified RCC interrupt has occurred or not.
+ * @param RCC_IT: specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: main PLL ready interrupt
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @retval The new state of RCC_IT (SET or RESET).
+ */
+ITStatus RCC_GetITStatus(uint8_t RCC_IT)
+{
+ ITStatus bitstatus = RESET;
+
+ /* Check the parameters */
+ assert_param(IS_RCC_GET_IT(RCC_IT));
+
+ /* Check the status of the specified RCC interrupt */
+ if ((RCC->CIR & RCC_IT) != (uint32_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ /* Return the RCC_IT status */
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the RCC's interrupt pending bits.
+ * @param RCC_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt
+ * @arg RCC_IT_LSERDY: LSE ready interrupt
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt
+ * @arg RCC_IT_HSERDY: HSE ready interrupt
+ * @arg RCC_IT_PLLRDY: main PLL ready interrupt
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @retval None
+ */
+void RCC_ClearITPendingBit(uint8_t RCC_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_RCC_CLEAR_IT(RCC_IT));
+
+ /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt
+ pending bits */
+ *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff -r 4985455162fc -r 1c6281289d67 stm32f4xx_rcc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32f4xx_rcc.h Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,511 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_rcc.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 30-September-2011
+ * @brief This file contains all the functions prototypes for the RCC firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_RCC_H
+#define __STM32F4xx_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+typedef struct
+{
+ uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency expressed in Hz */
+ uint32_t HCLK_Frequency; /*!< HCLK clock frequency expressed in Hz */
+ uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency expressed in Hz */
+ uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency expressed in Hz */
+}RCC_ClocksTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RCC_HSE_configuration
+ * @{
+ */
+#define RCC_HSE_OFF ((uint8_t)0x00)
+#define RCC_HSE_ON ((uint8_t)0x01)
+#define RCC_HSE_Bypass ((uint8_t)0x05)
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_Bypass))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Clock_Source
+ * @{
+ */
+#define RCC_PLLSource_HSI ((uint32_t)0x00000000)
+#define RCC_PLLSource_HSE ((uint32_t)0x00400000)
+#define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI) || \
+ ((SOURCE) == RCC_PLLSource_HSE))
+#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63)
+#define IS_RCC_PLLN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2) || ((VALUE) == 4) || ((VALUE) == 6) || ((VALUE) == 8))
+#define IS_RCC_PLLQ_VALUE(VALUE) ((4 <= (VALUE)) && ((VALUE) <= 15))
+
+#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source
+ * @{
+ */
+#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000)
+#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001)
+#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002)
+#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSource_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSource_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source
+ * @{
+ */
+#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000)
+#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080)
+#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090)
+#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0)
+#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0)
+#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0)
+#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0)
+#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0)
+#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0)
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \
+ ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \
+ ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \
+ ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \
+ ((HCLK) == RCC_SYSCLK_Div512))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source
+ * @{
+ */
+#define RCC_HCLK_Div1 ((uint32_t)0x00000000)
+#define RCC_HCLK_Div2 ((uint32_t)0x00001000)
+#define RCC_HCLK_Div4 ((uint32_t)0x00001400)
+#define RCC_HCLK_Div8 ((uint32_t)0x00001800)
+#define RCC_HCLK_Div16 ((uint32_t)0x00001C00)
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \
+ ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \
+ ((PCLK) == RCC_HCLK_Div16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt_Source
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint8_t)0x01)
+#define RCC_IT_LSERDY ((uint8_t)0x02)
+#define RCC_IT_HSIRDY ((uint8_t)0x04)
+#define RCC_IT_HSERDY ((uint8_t)0x08)
+#define RCC_IT_PLLRDY ((uint8_t)0x10)
+#define RCC_IT_PLLI2SRDY ((uint8_t)0x20)
+#define RCC_IT_CSS ((uint8_t)0x80)
+#define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xC0) == 0x00) && ((IT) != 0x00))
+#define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \
+ ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \
+ ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \
+ ((IT) == RCC_IT_PLLI2SRDY))
+#define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x40) == 0x00) && ((IT) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Configuration
+ * @{
+ */
+#define RCC_LSE_OFF ((uint8_t)0x00)
+#define RCC_LSE_ON ((uint8_t)0x01)
+#define RCC_LSE_Bypass ((uint8_t)0x04)
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_Bypass))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source
+ * @{
+ */
+#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100)
+#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200)
+#define RCC_RTCCLKSource_HSE_Div2 ((uint32_t)0x00020300)
+#define RCC_RTCCLKSource_HSE_Div3 ((uint32_t)0x00030300)
+#define RCC_RTCCLKSource_HSE_Div4 ((uint32_t)0x00040300)
+#define RCC_RTCCLKSource_HSE_Div5 ((uint32_t)0x00050300)
+#define RCC_RTCCLKSource_HSE_Div6 ((uint32_t)0x00060300)
+#define RCC_RTCCLKSource_HSE_Div7 ((uint32_t)0x00070300)
+#define RCC_RTCCLKSource_HSE_Div8 ((uint32_t)0x00080300)
+#define RCC_RTCCLKSource_HSE_Div9 ((uint32_t)0x00090300)
+#define RCC_RTCCLKSource_HSE_Div10 ((uint32_t)0x000A0300)
+#define RCC_RTCCLKSource_HSE_Div11 ((uint32_t)0x000B0300)
+#define RCC_RTCCLKSource_HSE_Div12 ((uint32_t)0x000C0300)
+#define RCC_RTCCLKSource_HSE_Div13 ((uint32_t)0x000D0300)
+#define RCC_RTCCLKSource_HSE_Div14 ((uint32_t)0x000E0300)
+#define RCC_RTCCLKSource_HSE_Div15 ((uint32_t)0x000F0300)
+#define RCC_RTCCLKSource_HSE_Div16 ((uint32_t)0x00100300)
+#define RCC_RTCCLKSource_HSE_Div17 ((uint32_t)0x00110300)
+#define RCC_RTCCLKSource_HSE_Div18 ((uint32_t)0x00120300)
+#define RCC_RTCCLKSource_HSE_Div19 ((uint32_t)0x00130300)
+#define RCC_RTCCLKSource_HSE_Div20 ((uint32_t)0x00140300)
+#define RCC_RTCCLKSource_HSE_Div21 ((uint32_t)0x00150300)
+#define RCC_RTCCLKSource_HSE_Div22 ((uint32_t)0x00160300)
+#define RCC_RTCCLKSource_HSE_Div23 ((uint32_t)0x00170300)
+#define RCC_RTCCLKSource_HSE_Div24 ((uint32_t)0x00180300)
+#define RCC_RTCCLKSource_HSE_Div25 ((uint32_t)0x00190300)
+#define RCC_RTCCLKSource_HSE_Div26 ((uint32_t)0x001A0300)
+#define RCC_RTCCLKSource_HSE_Div27 ((uint32_t)0x001B0300)
+#define RCC_RTCCLKSource_HSE_Div28 ((uint32_t)0x001C0300)
+#define RCC_RTCCLKSource_HSE_Div29 ((uint32_t)0x001D0300)
+#define RCC_RTCCLKSource_HSE_Div30 ((uint32_t)0x001E0300)
+#define RCC_RTCCLKSource_HSE_Div31 ((uint32_t)0x001F0300)
+#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \
+ ((SOURCE) == RCC_RTCCLKSource_LSI) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div2) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div3) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div4) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div5) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div6) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div7) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div8) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div9) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div10) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div11) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div12) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div13) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div14) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div15) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div16) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div17) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div18) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div19) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div20) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div21) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div22) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div23) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div24) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div25) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div26) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div27) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div28) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div29) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div30) || \
+ ((SOURCE) == RCC_RTCCLKSource_HSE_Div31))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2S_Clock_Source
+ * @{
+ */
+#define RCC_I2S2CLKSource_PLLI2S ((uint8_t)0x00)
+#define RCC_I2S2CLKSource_Ext ((uint8_t)0x01)
+
+#define IS_RCC_I2SCLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_PLLI2S) || ((SOURCE) == RCC_I2S2CLKSource_Ext))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB1_Peripherals
+ * @{
+ */
+#define RCC_AHB1Periph_GPIOA ((uint32_t)0x00000001)
+#define RCC_AHB1Periph_GPIOB ((uint32_t)0x00000002)
+#define RCC_AHB1Periph_GPIOC ((uint32_t)0x00000004)
+#define RCC_AHB1Periph_GPIOD ((uint32_t)0x00000008)
+#define RCC_AHB1Periph_GPIOE ((uint32_t)0x00000010)
+#define RCC_AHB1Periph_GPIOF ((uint32_t)0x00000020)
+#define RCC_AHB1Periph_GPIOG ((uint32_t)0x00000040)
+#define RCC_AHB1Periph_GPIOH ((uint32_t)0x00000080)
+#define RCC_AHB1Periph_GPIOI ((uint32_t)0x00000100)
+#define RCC_AHB1Periph_CRC ((uint32_t)0x00001000)
+#define RCC_AHB1Periph_FLITF ((uint32_t)0x00008000)
+#define RCC_AHB1Periph_SRAM1 ((uint32_t)0x00010000)
+#define RCC_AHB1Periph_SRAM2 ((uint32_t)0x00020000)
+#define RCC_AHB1Periph_BKPSRAM ((uint32_t)0x00040000)
+#define RCC_AHB1Periph_CCMDATARAMEN ((uint32_t)0x00100000)
+#define RCC_AHB1Periph_DMA1 ((uint32_t)0x00200000)
+#define RCC_AHB1Periph_DMA2 ((uint32_t)0x00400000)
+#define RCC_AHB1Periph_ETH_MAC ((uint32_t)0x02000000)
+#define RCC_AHB1Periph_ETH_MAC_Tx ((uint32_t)0x04000000)
+#define RCC_AHB1Periph_ETH_MAC_Rx ((uint32_t)0x08000000)
+#define RCC_AHB1Periph_ETH_MAC_PTP ((uint32_t)0x10000000)
+#define RCC_AHB1Periph_OTG_HS ((uint32_t)0x20000000)
+#define RCC_AHB1Periph_OTG_HS_ULPI ((uint32_t)0x40000000)
+#define IS_RCC_AHB1_CLOCK_PERIPH(PERIPH) ((((PERIPH) & 0x818BEE00) == 0x00) && ((PERIPH) != 0x00))
+#define IS_RCC_AHB1_RESET_PERIPH(PERIPH) ((((PERIPH) & 0xDD9FEE00) == 0x00) && ((PERIPH) != 0x00))
+#define IS_RCC_AHB1_LPMODE_PERIPH(PERIPH) ((((PERIPH) & 0x81986E00) == 0x00) && ((PERIPH) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB2_Peripherals
+ * @{
+ */
+#define RCC_AHB2Periph_DCMI ((uint32_t)0x00000001)
+#define RCC_AHB2Periph_CRYP ((uint32_t)0x00000010)
+#define RCC_AHB2Periph_HASH ((uint32_t)0x00000020)
+#define RCC_AHB2Periph_RNG ((uint32_t)0x00000040)
+#define RCC_AHB2Periph_OTG_FS ((uint32_t)0x00000080)
+#define IS_RCC_AHB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFF0E) == 0x00) && ((PERIPH) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB3_Peripherals
+ * @{
+ */
+#define RCC_AHB3Periph_FSMC ((uint32_t)0x00000001)
+#define IS_RCC_AHB3_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFFE) == 0x00) && ((PERIPH) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Peripherals
+ * @{
+ */
+#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001)
+#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002)
+#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004)
+#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008)
+#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010)
+#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020)
+#define RCC_APB1Periph_TIM12 ((uint32_t)0x00000040)
+#define RCC_APB1Periph_TIM13 ((uint32_t)0x00000080)
+#define RCC_APB1Periph_TIM14 ((uint32_t)0x00000100)
+#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800)
+#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000)
+#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000)
+#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000)
+#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000)
+#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000)
+#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000)
+#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000)
+#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000)
+#define RCC_APB1Periph_I2C3 ((uint32_t)0x00800000)
+#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000)
+#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000)
+#define RCC_APB1Periph_PWR ((uint32_t)0x10000000)
+#define RCC_APB1Periph_DAC ((uint32_t)0x20000000)
+#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0xC9013600) == 0x00) && ((PERIPH) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Peripherals
+ * @{
+ */
+#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000001)
+#define RCC_APB2Periph_TIM8 ((uint32_t)0x00000002)
+#define RCC_APB2Periph_USART1 ((uint32_t)0x00000010)
+#define RCC_APB2Periph_USART6 ((uint32_t)0x00000020)
+#define RCC_APB2Periph_ADC ((uint32_t)0x00000100)
+#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000100)
+#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000200)
+#define RCC_APB2Periph_ADC3 ((uint32_t)0x00000400)
+#define RCC_APB2Periph_SDIO ((uint32_t)0x00000800)
+#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000)
+#define RCC_APB2Periph_SYSCFG ((uint32_t)0x00004000)
+#define RCC_APB2Periph_TIM9 ((uint32_t)0x00010000)
+#define RCC_APB2Periph_TIM10 ((uint32_t)0x00020000)
+#define RCC_APB2Periph_TIM11 ((uint32_t)0x00040000)
+#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFF8A0CC) == 0x00) && ((PERIPH) != 0x00))
+#define IS_RCC_APB2_RESET_PERIPH(PERIPH) ((((PERIPH) & 0xFFF8A6CC) == 0x00) && ((PERIPH) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO1_Clock_Source_Prescaler
+ * @{
+ */
+#define RCC_MCO1Source_HSI ((uint32_t)0x00000000)
+#define RCC_MCO1Source_LSE ((uint32_t)0x00200000)
+#define RCC_MCO1Source_HSE ((uint32_t)0x00400000)
+#define RCC_MCO1Source_PLLCLK ((uint32_t)0x00600000)
+#define RCC_MCO1Div_1 ((uint32_t)0x00000000)
+#define RCC_MCO1Div_2 ((uint32_t)0x04000000)
+#define RCC_MCO1Div_3 ((uint32_t)0x05000000)
+#define RCC_MCO1Div_4 ((uint32_t)0x06000000)
+#define RCC_MCO1Div_5 ((uint32_t)0x07000000)
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1Source_HSI) || ((SOURCE) == RCC_MCO1Source_LSE) || \
+ ((SOURCE) == RCC_MCO1Source_HSE) || ((SOURCE) == RCC_MCO1Source_PLLCLK))
+
+#define IS_RCC_MCO1DIV(DIV) (((DIV) == RCC_MCO1Div_1) || ((DIV) == RCC_MCO1Div_2) || \
+ ((DIV) == RCC_MCO1Div_3) || ((DIV) == RCC_MCO1Div_4) || \
+ ((DIV) == RCC_MCO1Div_5))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO2_Clock_Source_Prescaler
+ * @{
+ */
+#define RCC_MCO2Source_SYSCLK ((uint32_t)0x00000000)
+#define RCC_MCO2Source_PLLI2SCLK ((uint32_t)0x40000000)
+#define RCC_MCO2Source_HSE ((uint32_t)0x80000000)
+#define RCC_MCO2Source_PLLCLK ((uint32_t)0xC0000000)
+#define RCC_MCO2Div_1 ((uint32_t)0x00000000)
+#define RCC_MCO2Div_2 ((uint32_t)0x20000000)
+#define RCC_MCO2Div_3 ((uint32_t)0x28000000)
+#define RCC_MCO2Div_4 ((uint32_t)0x30000000)
+#define RCC_MCO2Div_5 ((uint32_t)0x38000000)
+#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2Source_SYSCLK) || ((SOURCE) == RCC_MCO2Source_PLLI2SCLK)|| \
+ ((SOURCE) == RCC_MCO2Source_HSE) || ((SOURCE) == RCC_MCO2Source_PLLCLK))
+
+#define IS_RCC_MCO2DIV(DIV) (((DIV) == RCC_MCO2Div_1) || ((DIV) == RCC_MCO2Div_2) || \
+ ((DIV) == RCC_MCO2Div_3) || ((DIV) == RCC_MCO2Div_4) || \
+ ((DIV) == RCC_MCO2Div_5))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag
+ * @{
+ */
+#define RCC_FLAG_HSIRDY ((uint8_t)0x21)
+#define RCC_FLAG_HSERDY ((uint8_t)0x31)
+#define RCC_FLAG_PLLRDY ((uint8_t)0x39)
+#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B)
+#define RCC_FLAG_LSERDY ((uint8_t)0x41)
+#define RCC_FLAG_LSIRDY ((uint8_t)0x61)
+#define RCC_FLAG_BORRST ((uint8_t)0x79)
+#define RCC_FLAG_PINRST ((uint8_t)0x7A)
+#define RCC_FLAG_PORRST ((uint8_t)0x7B)
+#define RCC_FLAG_SFTRST ((uint8_t)0x7C)
+#define RCC_FLAG_IWDGRST ((uint8_t)0x7D)
+#define RCC_FLAG_WWDGRST ((uint8_t)0x7E)
+#define RCC_FLAG_LPWRRST ((uint8_t)0x7F)
+#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \
+ ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \
+ ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_BORRST) || \
+ ((FLAG) == RCC_FLAG_PINRST) || ((FLAG) == RCC_FLAG_PORRST) || \
+ ((FLAG) == RCC_FLAG_SFTRST) || ((FLAG) == RCC_FLAG_IWDGRST)|| \
+ ((FLAG) == RCC_FLAG_WWDGRST)|| ((FLAG) == RCC_FLAG_LPWRRST)|| \
+ ((FLAG) == RCC_FLAG_PLLI2SRDY))
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* Function used to set the RCC clock configuration to the default reset state */
+void RCC_DeInit(void);
+
+/* Internal/external clocks, PLL, CSS and MCO configuration functions *********/
+void RCC_HSEConfig(uint8_t RCC_HSE);
+ErrorStatus RCC_WaitForHSEStartUp(void);
+void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue);
+void RCC_HSICmd(FunctionalState NewState);
+void RCC_LSEConfig(uint8_t RCC_LSE);
+void RCC_LSICmd(FunctionalState NewState);
+
+void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP, uint32_t PLLQ);
+void RCC_PLLCmd(FunctionalState NewState);
+void RCC_PLLI2SConfig(uint32_t PLLI2SN, uint32_t PLLI2SR);
+void RCC_PLLI2SCmd(FunctionalState NewState);
+
+void RCC_ClockSecuritySystemCmd(FunctionalState NewState);
+void RCC_MCO1Config(uint32_t RCC_MCO1Source, uint32_t RCC_MCO1Div);
+void RCC_MCO2Config(uint32_t RCC_MCO2Source, uint32_t RCC_MCO2Div);
+
+/* System, AHB and APB busses clocks configuration functions ******************/
+void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource);
+uint8_t RCC_GetSYSCLKSource(void);
+void RCC_HCLKConfig(uint32_t RCC_SYSCLK);
+void RCC_PCLK1Config(uint32_t RCC_HCLK);
+void RCC_PCLK2Config(uint32_t RCC_HCLK);
+void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks);
+
+/* Peripheral clocks configuration functions **********************************/
+void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource);
+void RCC_RTCCLKCmd(FunctionalState NewState);
+void RCC_BackupResetCmd(FunctionalState NewState);
+void RCC_I2SCLKConfig(uint32_t RCC_I2SCLKSource);
+
+void RCC_AHB1PeriphClockCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState);
+void RCC_AHB2PeriphClockCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState);
+void RCC_AHB3PeriphClockCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState);
+void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
+void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
+
+void RCC_AHB1PeriphResetCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState);
+void RCC_AHB2PeriphResetCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState);
+void RCC_AHB3PeriphResetCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState);
+void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
+void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
+
+void RCC_AHB1PeriphClockLPModeCmd(uint32_t RCC_AHB1Periph, FunctionalState NewState);
+void RCC_AHB2PeriphClockLPModeCmd(uint32_t RCC_AHB2Periph, FunctionalState NewState);
+void RCC_AHB3PeriphClockLPModeCmd(uint32_t RCC_AHB3Periph, FunctionalState NewState);
+void RCC_APB1PeriphClockLPModeCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
+void RCC_APB2PeriphClockLPModeCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
+
+/* Interrupts and flags management functions **********************************/
+void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState);
+FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG);
+void RCC_ClearFlag(void);
+ITStatus RCC_GetITStatus(uint8_t RCC_IT);
+void RCC_ClearITPendingBit(uint8_t RCC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_RCC_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff -r 4985455162fc -r 1c6281289d67 stm32f4xx_tim.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32f4xx_tim.c Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,3353 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_tim.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 30-September-2011
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the TIM peripheral:
+ * - TimeBase management
+ * - Output Compare management
+ * - Input Capture management
+ * - Advanced-control timers (TIM1 and TIM8) specific features
+ * - Interrupts, DMA and flags management
+ * - Clocks management
+ * - Synchronization management
+ * - Specific interface management
+ * - Specific remapping management
+ *
+ * @verbatim
+ *
+ * ===================================================================
+ * How to use this driver
+ * ===================================================================
+ * This driver provides functions to configure and program the TIM
+ * of all STM32F4xx devices.
+ * These functions are split in 9 groups:
+ *
+ * 1. TIM TimeBase management: this group includes all needed functions
+ * to configure the TM Timebase unit:
+ * - Set/Get Prescaler
+ * - Set/Get Autoreload
+ * - Counter modes configuration
+ * - Set Clock division
+ * - Select the One Pulse mode
+ * - Update Request Configuration
+ * - Update Disable Configuration
+ * - Auto-Preload Configuration
+ * - Enable/Disable the counter
+ *
+ * 2. TIM Output Compare management: this group includes all needed
+ * functions to configure the Capture/Compare unit used in Output
+ * compare mode:
+ * - Configure each channel, independently, in Output Compare mode
+ * - Select the output compare modes
+ * - Select the Polarities of each channel
+ * - Set/Get the Capture/Compare register values
+ * - Select the Output Compare Fast mode
+ * - Select the Output Compare Forced mode
+ * - Output Compare-Preload Configuration
+ * - Clear Output Compare Reference
+ * - Select the OCREF Clear signal
+ * - Enable/Disable the Capture/Compare Channels
+ *
+ * 3. TIM Input Capture management: this group includes all needed
+ * functions to configure the Capture/Compare unit used in
+ * Input Capture mode:
+ * - Configure each channel in input capture mode
+ * - Configure Channel1/2 in PWM Input mode
+ * - Set the Input Capture Prescaler
+ * - Get the Capture/Compare values
+ *
+ * 4. Advanced-control timers (TIM1 and TIM8) specific features
+ * - Configures the Break input, dead time, Lock level, the OSSI,
+ * the OSSR State and the AOE(automatic output enable)
+ * - Enable/Disable the TIM peripheral Main Outputs
+ * - Select the Commutation event
+ * - Set/Reset the Capture Compare Preload Control bit
+ *
+ * 5. TIM interrupts, DMA and flags management
+ * - Enable/Disable interrupt sources
+ * - Get flags status
+ * - Clear flags/ Pending bits
+ * - Enable/Disable DMA requests
+ * - Configure DMA burst mode
+ * - Select CaptureCompare DMA request
+ *
+ * 6. TIM clocks management: this group includes all needed functions
+ * to configure the clock controller unit:
+ * - Select internal/External clock
+ * - Select the external clock mode: ETR(Mode1/Mode2), TIx or ITRx
+ *
+ * 7. TIM synchronization management: this group includes all needed
+ * functions to configure the Synchronization unit:
+ * - Select Input Trigger
+ * - Select Output Trigger
+ * - Select Master Slave Mode
+ * - ETR Configuration when used as external trigger
+ *
+ * 8. TIM specific interface management, this group includes all
+ * needed functions to use the specific TIM interface:
+ * - Encoder Interface Configuration
+ * - Select Hall Sensor
+ *
+ * 9. TIM specific remapping management includes the Remapping
+ * configuration of specific timers
+ *
+ * @endverbatim
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_tim.h"
+#include "stm32f4xx_rcc.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup TIM
+ * @brief TIM driver modules
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/* ---------------------- TIM registers bit mask ------------------------ */
+#define SMCR_ETR_MASK ((uint16_t)0x00FF)
+#define CCMR_OFFSET ((uint16_t)0x0018)
+#define CCER_CCE_SET ((uint16_t)0x0001)
+#define CCER_CCNE_SET ((uint16_t)0x0004)
+#define CCMR_OC13M_MASK ((uint16_t)0xFF8F)
+#define CCMR_OC24M_MASK ((uint16_t)0x8FFF)
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter);
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup TIM_Private_Functions
+ * @{
+ */
+
+/** @defgroup TIM_Group1 TimeBase management functions
+ * @brief TimeBase management functions
+ *
+@verbatim
+ ===============================================================================
+ TimeBase management functions
+ ===============================================================================
+
+ ===================================================================
+ TIM Driver: how to use it in Timing(Time base) Mode
+ ===================================================================
+ To use the Timer in Timing(Time base) mode, the following steps are mandatory:
+
+ 1. Enable TIM clock using RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) function
+
+ 2. Fill the TIM_TimeBaseInitStruct with the desired parameters.
+
+ 3. Call TIM_TimeBaseInit(TIMx, &TIM_TimeBaseInitStruct) to configure the Time Base unit
+ with the corresponding configuration
+
+ 4. Enable the NVIC if you need to generate the update interrupt.
+
+ 5. Enable the corresponding interrupt using the function TIM_ITConfig(TIMx, TIM_IT_Update)
+
+ 6. Call the TIM_Cmd(ENABLE) function to enable the TIM counter.
+
+ Note1: All other functions can be used separately to modify, if needed,
+ a specific feature of the Timer.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the TIMx peripheral registers to their default reset values.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @retval None
+
+ */
+void TIM_DeInit(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+
+ if (TIMx == TIM1)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE);
+ }
+ else if (TIMx == TIM2)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE);
+ }
+ else if (TIMx == TIM3)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE);
+ }
+ else if (TIMx == TIM4)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE);
+ }
+ else if (TIMx == TIM5)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE);
+ }
+ else if (TIMx == TIM6)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE);
+ }
+ else if (TIMx == TIM7)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE);
+ }
+ else if (TIMx == TIM8)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE);
+ }
+ else if (TIMx == TIM9)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE);
+ }
+ else if (TIMx == TIM10)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE);
+ }
+ else if (TIMx == TIM11)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE);
+ }
+ else if (TIMx == TIM12)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE);
+ }
+ else if (TIMx == TIM13)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE);
+ }
+ else
+ {
+ if (TIMx == TIM14)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the TIMx Time Base Unit peripheral according to
+ * the specified parameters in the TIM_TimeBaseInitStruct.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef structure
+ * that contains the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
+{
+ uint16_t tmpcr1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode));
+ assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision));
+
+ tmpcr1 = TIMx->CR1;
+
+ if((TIMx == TIM1) || (TIMx == TIM8)||
+ (TIMx == TIM2) || (TIMx == TIM3)||
+ (TIMx == TIM4) || (TIMx == TIM5))
+ {
+ /* Select the Counter Mode */
+ tmpcr1 &= (uint16_t)(~(TIM_CR1_DIR | TIM_CR1_CMS));
+ tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode;
+ }
+
+ if((TIMx != TIM6) && (TIMx != TIM7))
+ {
+ /* Set the clock division */
+ tmpcr1 &= (uint16_t)(~TIM_CR1_CKD);
+ tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision;
+ }
+
+ TIMx->CR1 = tmpcr1;
+
+ /* Set the Autoreload value */
+ TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ;
+
+ /* Set the Prescaler value */
+ TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler;
+
+ if ((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ /* Set the Repetition Counter value */
+ TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter;
+ }
+
+ /* Generate an update event to reload the Prescaler
+ and the repetition counter(only for TIM1 and TIM8) value immediatly */
+ TIMx->EGR = TIM_PSCReloadMode_Immediate;
+}
+
+/**
+ * @brief Fills each TIM_TimeBaseInitStruct member with its default value.
+ * @param TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef
+ * structure which will be initialized.
+ * @retval None
+ */
+void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
+{
+ /* Set the default configuration */
+ TIM_TimeBaseInitStruct->TIM_Period = 0xFFFFFFFF;
+ TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000;
+ TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1;
+ TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up;
+ TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000;
+}
+
+/**
+ * @brief Configures the TIMx Prescaler.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @param Prescaler: specifies the Prescaler Register value
+ * @param TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode
+ * This parameter can be one of the following values:
+ * @arg TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event.
+ * @arg TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediatly.
+ * @retval None
+ */
+void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode));
+ /* Set the Prescaler value */
+ TIMx->PSC = Prescaler;
+ /* Set or reset the UG Bit */
+ TIMx->EGR = TIM_PSCReloadMode;
+}
+
+/**
+ * @brief Specifies the TIMx Counter Mode to be used.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_CounterMode: specifies the Counter Mode to be used
+ * This parameter can be one of the following values:
+ * @arg TIM_CounterMode_Up: TIM Up Counting Mode
+ * @arg TIM_CounterMode_Down: TIM Down Counting Mode
+ * @arg TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1
+ * @arg TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2
+ * @arg TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3
+ * @retval None
+ */
+void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode)
+{
+ uint16_t tmpcr1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode));
+
+ tmpcr1 = TIMx->CR1;
+
+ /* Reset the CMS and DIR Bits */
+ tmpcr1 &= (uint16_t)~(TIM_CR1_DIR | TIM_CR1_CMS);
+
+ /* Set the Counter Mode */
+ tmpcr1 |= TIM_CounterMode;
+
+ /* Write to TIMx CR1 register */
+ TIMx->CR1 = tmpcr1;
+}
+
+/**
+ * @brief Sets the TIMx Counter Register value
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @param Counter: specifies the Counter register new value.
+ * @retval None
+ */
+void TIM_SetCounter(TIM_TypeDef* TIMx, uint32_t Counter)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+
+ /* Set the Counter Register value */
+ TIMx->CNT = Counter;
+}
+
+/**
+ * @brief Sets the TIMx Autoreload Register value
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @param Autoreload: specifies the Autoreload register new value.
+ * @retval None
+ */
+void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint32_t Autoreload)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+
+ /* Set the Autoreload Register value */
+ TIMx->ARR = Autoreload;
+}
+
+/**
+ * @brief Gets the TIMx Counter value.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @retval Counter Register value
+ */
+uint32_t TIM_GetCounter(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+
+ /* Get the Counter Register value */
+ return TIMx->CNT;
+}
+
+/**
+ * @brief Gets the TIMx Prescaler value.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @retval Prescaler Register value.
+ */
+uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+
+ /* Get the Prescaler Register value */
+ return TIMx->PSC;
+}
+
+/**
+ * @brief Enables or Disables the TIMx Update event.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @param NewState: new state of the TIMx UDIS bit
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Set the Update Disable Bit */
+ TIMx->CR1 |= TIM_CR1_UDIS;
+ }
+ else
+ {
+ /* Reset the Update Disable Bit */
+ TIMx->CR1 &= (uint16_t)~TIM_CR1_UDIS;
+ }
+}
+
+/**
+ * @brief Configures the TIMx Update Request Interrupt source.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @param TIM_UpdateSource: specifies the Update source.
+ * This parameter can be one of the following values:
+ * @arg TIM_UpdateSource_Global: Source of update is the counter
+ * overflow/underflow or the setting of UG bit, or an update
+ * generation through the slave mode controller.
+ * @arg TIM_UpdateSource_Regular: Source of update is counter overflow/underflow.
+ * @retval None
+ */
+void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource));
+
+ if (TIM_UpdateSource != TIM_UpdateSource_Global)
+ {
+ /* Set the URS Bit */
+ TIMx->CR1 |= TIM_CR1_URS;
+ }
+ else
+ {
+ /* Reset the URS Bit */
+ TIMx->CR1 &= (uint16_t)~TIM_CR1_URS;
+ }
+}
+
+/**
+ * @brief Enables or disables TIMx peripheral Preload register on ARR.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @param NewState: new state of the TIMx peripheral Preload register
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Set the ARR Preload Bit */
+ TIMx->CR1 |= TIM_CR1_ARPE;
+ }
+ else
+ {
+ /* Reset the ARR Preload Bit */
+ TIMx->CR1 &= (uint16_t)~TIM_CR1_ARPE;
+ }
+}
+
+/**
+ * @brief Selects the TIMx's One Pulse Mode.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @param TIM_OPMode: specifies the OPM Mode to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_OPMode_Single
+ * @arg TIM_OPMode_Repetitive
+ * @retval None
+ */
+void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_OPM_MODE(TIM_OPMode));
+
+ /* Reset the OPM Bit */
+ TIMx->CR1 &= (uint16_t)~TIM_CR1_OPM;
+
+ /* Configure the OPM Mode */
+ TIMx->CR1 |= TIM_OPMode;
+}
+
+/**
+ * @brief Sets the TIMx Clock Division value.
+ * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
+ * @param TIM_CKD: specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CKD_DIV1: TDTS = Tck_tim
+ * @arg TIM_CKD_DIV2: TDTS = 2*Tck_tim
+ * @arg TIM_CKD_DIV4: TDTS = 4*Tck_tim
+ * @retval None
+ */
+void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_CKD_DIV(TIM_CKD));
+
+ /* Reset the CKD Bits */
+ TIMx->CR1 &= (uint16_t)(~TIM_CR1_CKD);
+
+ /* Set the CKD value */
+ TIMx->CR1 |= TIM_CKD;
+}
+
+/**
+ * @brief Enables or disables the specified TIM peripheral.
+ * @param TIMx: where x can be 1 to 14 to select the TIMx peripheral.
+ * @param NewState: new state of the TIMx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the TIM Counter */
+ TIMx->CR1 |= TIM_CR1_CEN;
+ }
+ else
+ {
+ /* Disable the TIM Counter */
+ TIMx->CR1 &= (uint16_t)~TIM_CR1_CEN;
+ }
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Group2 Output Compare management functions
+ * @brief Output Compare management functions
+ *
+@verbatim
+ ===============================================================================
+ Output Compare management functions
+ ===============================================================================
+
+ ===================================================================
+ TIM Driver: how to use it in Output Compare Mode
+ ===================================================================
+ To use the Timer in Output Compare mode, the following steps are mandatory:
+
+ 1. Enable TIM clock using RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) function
+
+ 2. Configure the TIM pins by configuring the corresponding GPIO pins
+
+ 2. Configure the Time base unit as described in the first part of this driver,
+ if needed, else the Timer will run with the default configuration:
+ - Autoreload value = 0xFFFF
+ - Prescaler value = 0x0000
+ - Counter mode = Up counting
+ - Clock Division = TIM_CKD_DIV1
+
+ 3. Fill the TIM_OCInitStruct with the desired parameters including:
+ - The TIM Output Compare mode: TIM_OCMode
+ - TIM Output State: TIM_OutputState
+ - TIM Pulse value: TIM_Pulse
+ - TIM Output Compare Polarity : TIM_OCPolarity
+
+ 4. Call TIM_OCxInit(TIMx, &TIM_OCInitStruct) to configure the desired channel with the
+ corresponding configuration
+
+ 5. Call the TIM_Cmd(ENABLE) function to enable the TIM counter.
+
+ Note1: All other functions can be used separately to modify, if needed,
+ a specific feature of the Timer.
+
+ Note2: In case of PWM mode, this function is mandatory:
+ TIM_OCxPreloadConfig(TIMx, TIM_OCPreload_ENABLE);
+
+ Note3: If the corresponding interrupt or DMA request are needed, the user should:
+ 1. Enable the NVIC (or the DMA) to use the TIM interrupts (or DMA requests).
+ 2. Enable the corresponding interrupt (or DMA request) using the function
+ TIM_ITConfig(TIMx, TIM_IT_CCx) (or TIM_DMA_Cmd(TIMx, TIM_DMA_CCx))
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the TIMx Channel1 according to the specified parameters in
+ * the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure that contains
+ * the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= (uint16_t)~TIM_CCER_CC1E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare Mode Bits */
+ tmpccmrx &= (uint16_t)~TIM_CCMR1_OC1M;
+ tmpccmrx &= (uint16_t)~TIM_CCMR1_CC1S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= TIM_OCInitStruct->TIM_OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)~TIM_CCER_CC1P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= TIM_OCInitStruct->TIM_OCPolarity;
+
+ /* Set the Output State */
+ tmpccer |= TIM_OCInitStruct->TIM_OutputState;
+
+ if((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= (uint16_t)~TIM_CCER_CC1NP;
+ /* Set the Output N Polarity */
+ tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity;
+ /* Reset the Output N State */
+ tmpccer &= (uint16_t)~TIM_CCER_CC1NE;
+
+ /* Set the Output N State */
+ tmpccer |= TIM_OCInitStruct->TIM_OutputNState;
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= (uint16_t)~TIM_CR2_OIS1;
+ tmpcr2 &= (uint16_t)~TIM_CR2_OIS1N;
+ /* Set the Output Idle state */
+ tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState;
+ /* Set the Output N Idle state */
+ tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState;
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIMx Channel2 according to the specified parameters
+ * in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure that contains
+ * the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= (uint16_t)~TIM_CCER_CC2E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmrx = TIMx->CCMR1;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= (uint16_t)~TIM_CCMR1_OC2M;
+ tmpccmrx &= (uint16_t)~TIM_CCMR1_CC2S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)~TIM_CCER_CC2P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4);
+
+ /* Set the Output State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4);
+
+ if((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= (uint16_t)~TIM_CCER_CC2NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4);
+ /* Reset the Output N State */
+ tmpccer &= (uint16_t)~TIM_CCER_CC2NE;
+
+ /* Set the Output N State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4);
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= (uint16_t)~TIM_CR2_OIS2;
+ tmpcr2 &= (uint16_t)~TIM_CR2_OIS2N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIMx Channel3 according to the specified parameters
+ * in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure that contains
+ * the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+
+ /* Disable the Channel 3: Reset the CC2E Bit */
+ TIMx->CCER &= (uint16_t)~TIM_CCER_CC3E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= (uint16_t)~TIM_CCMR2_OC3M;
+ tmpccmrx &= (uint16_t)~TIM_CCMR2_CC3S;
+ /* Select the Output Compare Mode */
+ tmpccmrx |= TIM_OCInitStruct->TIM_OCMode;
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)~TIM_CCER_CC3P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8);
+
+ /* Set the Output State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8);
+
+ if((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+ assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+
+ /* Reset the Output N Polarity level */
+ tmpccer &= (uint16_t)~TIM_CCER_CC3NP;
+ /* Set the Output N Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8);
+ /* Reset the Output N State */
+ tmpccer &= (uint16_t)~TIM_CCER_CC3NE;
+
+ /* Set the Output N State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8);
+ /* Reset the Output Compare and Output Compare N IDLE State */
+ tmpcr2 &= (uint16_t)~TIM_CR2_OIS3;
+ tmpcr2 &= (uint16_t)~TIM_CR2_OIS3N;
+ /* Set the Output Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4);
+ /* Set the Output N Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Initializes the TIMx Channel4 according to the specified parameters
+ * in the TIM_OCInitStruct.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure that contains
+ * the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+ assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= (uint16_t)~TIM_CCER_CC4E;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+ /* Get the TIMx CR2 register value */
+ tmpcr2 = TIMx->CR2;
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmrx = TIMx->CCMR2;
+
+ /* Reset the Output Compare mode and Capture/Compare selection Bits */
+ tmpccmrx &= (uint16_t)~TIM_CCMR2_OC4M;
+ tmpccmrx &= (uint16_t)~TIM_CCMR2_CC4S;
+
+ /* Select the Output Compare Mode */
+ tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8);
+
+ /* Reset the Output Polarity level */
+ tmpccer &= (uint16_t)~TIM_CCER_CC4P;
+ /* Set the Output Compare Polarity */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12);
+
+ /* Set the Output State */
+ tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12);
+
+ if((TIMx == TIM1) || (TIMx == TIM8))
+ {
+ assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+ /* Reset the Output Compare IDLE State */
+ tmpcr2 &=(uint16_t) ~TIM_CR2_OIS4;
+ /* Set the Output Idle state */
+ tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6);
+ }
+ /* Write to TIMx CR2 */
+ TIMx->CR2 = tmpcr2;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmrx;
+
+ /* Set the Capture Compare Register value */
+ TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Fills each TIM_OCInitStruct member with its default value.
+ * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+ /* Set the default configuration */
+ TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing;
+ TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable;
+ TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable;
+ TIM_OCInitStruct->TIM_Pulse = 0x00000000;
+ TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High;
+ TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High;
+ TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset;
+ TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset;
+}
+
+/**
+ * @brief Selects the TIM Output Compare Mode.
+ * @note This function disables the selected channel before changing the Output
+ * Compare Mode. If needed, user has to enable this channel using
+ * TIM_CCxCmd() and TIM_CCxNCmd() functions.
+ * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
+ * @param TIM_Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @param TIM_OCMode: specifies the TIM Output Compare Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCMode_Timing
+ * @arg TIM_OCMode_Active
+ * @arg TIM_OCMode_Toggle
+ * @arg TIM_OCMode_PWM1
+ * @arg TIM_OCMode_PWM2
+ * @arg TIM_ForcedAction_Active
+ * @arg TIM_ForcedAction_InActive
+ * @retval None
+ */
+void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode)
+{
+ uint32_t tmp = 0;
+ uint16_t tmp1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_CHANNEL(TIM_Channel));
+ assert_param(IS_TIM_OCM(TIM_OCMode));
+
+ tmp = (uint32_t) TIMx;
+ tmp += CCMR_OFFSET;
+
+ tmp1 = CCER_CCE_SET << (uint16_t)TIM_Channel;
+
+ /* Disable the Channel: Reset the CCxE Bit */
+ TIMx->CCER &= (uint16_t) ~tmp1;
+
+ if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3))
+ {
+ tmp += (TIM_Channel>>1);
+
+ /* Reset the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp &= CCMR_OC13M_MASK;
+
+ /* Configure the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp |= TIM_OCMode;
+ }
+ else
+ {
+ tmp += (uint16_t)(TIM_Channel - (uint16_t)4)>> (uint16_t)1;
+
+ /* Reset the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp &= CCMR_OC24M_MASK;
+
+ /* Configure the OCxM bits in the CCMRx register */
+ *(__IO uint32_t *) tmp |= (uint16_t)(TIM_OCMode << 8);
+ }
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare1 Register value
+ * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
+ * @param Compare1: specifies the Capture Compare1 register new value.
+ * @retval None
+ */
+void TIM_SetCompare1(TIM_TypeDef* TIMx, uint32_t Compare1)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+
+ /* Set the Capture Compare1 Register value */
+ TIMx->CCR1 = Compare1;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare2 Register value
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @param Compare2: specifies the Capture Compare2 register new value.
+ * @retval None
+ */
+void TIM_SetCompare2(TIM_TypeDef* TIMx, uint32_t Compare2)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+
+ /* Set the Capture Compare2 Register value */
+ TIMx->CCR2 = Compare2;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare3 Register value
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param Compare3: specifies the Capture Compare3 register new value.
+ * @retval None
+ */
+void TIM_SetCompare3(TIM_TypeDef* TIMx, uint32_t Compare3)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+
+ /* Set the Capture Compare3 Register value */
+ TIMx->CCR3 = Compare3;
+}
+
+/**
+ * @brief Sets the TIMx Capture Compare4 Register value
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param Compare4: specifies the Capture Compare4 register new value.
+ * @retval None
+ */
+void TIM_SetCompare4(TIM_TypeDef* TIMx, uint32_t Compare4)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+
+ /* Set the Capture Compare4 Register value */
+ TIMx->CCR4 = Compare4;
+}
+
+/**
+ * @brief Forces the TIMx output 1 waveform to active or inactive level.
+ * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC1REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC1REF.
+ * @retval None
+ */
+void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Reset the OC1M Bits */
+ tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC1M;
+
+ /* Configure The Forced output Mode */
+ tmpccmr1 |= TIM_ForcedAction;
+
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Forces the TIMx output 2 waveform to active or inactive level.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC2REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC2REF.
+ * @retval None
+ */
+void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Reset the OC2M Bits */
+ tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC2M;
+
+ /* Configure The Forced output Mode */
+ tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8);
+
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Forces the TIMx output 3 waveform to active or inactive level.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC3REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC3REF.
+ * @retval None
+ */
+void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+
+ tmpccmr2 = TIMx->CCMR2;
+
+ /* Reset the OC1M Bits */
+ tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC3M;
+
+ /* Configure The Forced output Mode */
+ tmpccmr2 |= TIM_ForcedAction;
+
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Forces the TIMx output 4 waveform to active or inactive level.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+ * This parameter can be one of the following values:
+ * @arg TIM_ForcedAction_Active: Force active level on OC4REF
+ * @arg TIM_ForcedAction_InActive: Force inactive level on OC4REF.
+ * @retval None
+ */
+void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+ uint16_t tmpccmr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+ tmpccmr2 = TIMx->CCMR2;
+
+ /* Reset the OC2M Bits */
+ tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC4M;
+
+ /* Configure The Forced output Mode */
+ tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8);
+
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR1.
+ * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Reset the OC1PE Bit */
+ tmpccmr1 &= (uint16_t)(~TIM_CCMR1_OC1PE);
+
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr1 |= TIM_OCPreload;
+
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR2.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Reset the OC2PE Bit */
+ tmpccmr1 &= (uint16_t)(~TIM_CCMR1_OC2PE);
+
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8);
+
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR3.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+
+ tmpccmr2 = TIMx->CCMR2;
+
+ /* Reset the OC3PE Bit */
+ tmpccmr2 &= (uint16_t)(~TIM_CCMR2_OC3PE);
+
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr2 |= TIM_OCPreload;
+
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Enables or disables the TIMx peripheral Preload register on CCR4.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPreload: new state of the TIMx peripheral Preload register
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPreload_Enable
+ * @arg TIM_OCPreload_Disable
+ * @retval None
+ */
+void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+ uint16_t tmpccmr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+
+ tmpccmr2 = TIMx->CCMR2;
+
+ /* Reset the OC4PE Bit */
+ tmpccmr2 &= (uint16_t)(~TIM_CCMR2_OC4PE);
+
+ /* Enable or Disable the Output Compare Preload feature */
+ tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8);
+
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 1 Fast feature.
+ * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Reset the OC1FE Bit */
+ tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC1FE;
+
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr1 |= TIM_OCFast;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 2 Fast feature.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Reset the OC2FE Bit */
+ tmpccmr1 &= (uint16_t)(~TIM_CCMR1_OC2FE);
+
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr1 |= (uint16_t)(TIM_OCFast << 8);
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 3 Fast feature.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmr2 = TIMx->CCMR2;
+
+ /* Reset the OC3FE Bit */
+ tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC3FE;
+
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr2 |= TIM_OCFast;
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Configures the TIMx Output Compare 4 Fast feature.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCFast_Enable: TIM output compare fast enable
+ * @arg TIM_OCFast_Disable: TIM output compare fast disable
+ * @retval None
+ */
+void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+ uint16_t tmpccmr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+
+ /* Get the TIMx CCMR2 register value */
+ tmpccmr2 = TIMx->CCMR2;
+
+ /* Reset the OC4FE Bit */
+ tmpccmr2 &= (uint16_t)(~TIM_CCMR2_OC4FE);
+
+ /* Enable or Disable the Output Compare Fast Bit */
+ tmpccmr2 |= (uint16_t)(TIM_OCFast << 8);
+
+ /* Write to TIMx CCMR2 */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF1 signal on an external event
+ * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Reset the OC1CE Bit */
+ tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC1CE;
+
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr1 |= TIM_OCClear;
+
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF2 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr1 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Reset the OC2CE Bit */
+ tmpccmr1 &= (uint16_t)~TIM_CCMR1_OC2CE;
+
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr1 |= (uint16_t)(TIM_OCClear << 8);
+
+ /* Write to TIMx CCMR1 register */
+ TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF3 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+
+ tmpccmr2 = TIMx->CCMR2;
+
+ /* Reset the OC3CE Bit */
+ tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC3CE;
+
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr2 |= TIM_OCClear;
+
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Clears or safeguards the OCREF4 signal on an external event
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+ * This parameter can be one of the following values:
+ * @arg TIM_OCClear_Enable: TIM Output clear enable
+ * @arg TIM_OCClear_Disable: TIM Output clear disable
+ * @retval None
+ */
+void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+ uint16_t tmpccmr2 = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+
+ tmpccmr2 = TIMx->CCMR2;
+
+ /* Reset the OC4CE Bit */
+ tmpccmr2 &= (uint16_t)~TIM_CCMR2_OC4CE;
+
+ /* Enable or Disable the Output Compare Clear Bit */
+ tmpccmr2 |= (uint16_t)(TIM_OCClear << 8);
+
+ /* Write to TIMx CCMR2 register */
+ TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+ * @brief Configures the TIMx channel 1 polarity.
+ * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC1 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+
+ tmpccer = TIMx->CCER;
+
+ /* Set or Reset the CC1P Bit */
+ tmpccer &= (uint16_t)(~TIM_CCER_CC1P);
+ tmpccer |= TIM_OCPolarity;
+
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx Channel 1N polarity.
+ * @param TIMx: where x can be 1 or 8 to select the TIM peripheral.
+ * @param TIM_OCNPolarity: specifies the OC1N Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCNPolarity_High: Output Compare active high
+ * @arg TIM_OCNPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+ uint16_t tmpccer = 0;
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+
+ tmpccer = TIMx->CCER;
+
+ /* Set or Reset the CC1NP Bit */
+ tmpccer &= (uint16_t)~TIM_CCER_CC1NP;
+ tmpccer |= TIM_OCNPolarity;
+
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx channel 2 polarity.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @param TIM_OCPolarity: specifies the OC2 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+
+ tmpccer = TIMx->CCER;
+
+ /* Set or Reset the CC2P Bit */
+ tmpccer &= (uint16_t)(~TIM_CCER_CC2P);
+ tmpccer |= (uint16_t)(TIM_OCPolarity << 4);
+
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx Channel 2N polarity.
+ * @param TIMx: where x can be 1 or 8 to select the TIM peripheral.
+ * @param TIM_OCNPolarity: specifies the OC2N Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCNPolarity_High: Output Compare active high
+ * @arg TIM_OCNPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+ uint16_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+
+ tmpccer = TIMx->CCER;
+
+ /* Set or Reset the CC2NP Bit */
+ tmpccer &= (uint16_t)~TIM_CCER_CC2NP;
+ tmpccer |= (uint16_t)(TIM_OCNPolarity << 4);
+
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx channel 3 polarity.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC3 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+
+ tmpccer = TIMx->CCER;
+
+ /* Set or Reset the CC3P Bit */
+ tmpccer &= (uint16_t)~TIM_CCER_CC3P;
+ tmpccer |= (uint16_t)(TIM_OCPolarity << 8);
+
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx Channel 3N polarity.
+ * @param TIMx: where x can be 1 or 8 to select the TIM peripheral.
+ * @param TIM_OCNPolarity: specifies the OC3N Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCNPolarity_High: Output Compare active high
+ * @arg TIM_OCNPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+ uint16_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+
+ tmpccer = TIMx->CCER;
+
+ /* Set or Reset the CC3NP Bit */
+ tmpccer &= (uint16_t)~TIM_CCER_CC3NP;
+ tmpccer |= (uint16_t)(TIM_OCNPolarity << 8);
+
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configures the TIMx channel 4 polarity.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_OCPolarity: specifies the OC4 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_OCPolarity_High: Output Compare active high
+ * @arg TIM_OCPolarity_Low: Output Compare active low
+ * @retval None
+ */
+void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+ uint16_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+
+ tmpccer = TIMx->CCER;
+
+ /* Set or Reset the CC4P Bit */
+ tmpccer &= (uint16_t)~TIM_CCER_CC4P;
+ tmpccer |= (uint16_t)(TIM_OCPolarity << 12);
+
+ /* Write to TIMx CCER register */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel x.
+ * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
+ * @param TIM_Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @arg TIM_Channel_4: TIM Channel 4
+ * @param TIM_CCx: specifies the TIM Channel CCxE bit new state.
+ * This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable.
+ * @retval None
+ */
+void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx)
+{
+ uint16_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_CHANNEL(TIM_Channel));
+ assert_param(IS_TIM_CCX(TIM_CCx));
+
+ tmp = CCER_CCE_SET << TIM_Channel;
+
+ /* Reset the CCxE Bit */
+ TIMx->CCER &= (uint16_t)~ tmp;
+
+ /* Set or reset the CCxE Bit */
+ TIMx->CCER |= (uint16_t)(TIM_CCx << TIM_Channel);
+}
+
+/**
+ * @brief Enables or disables the TIM Capture Compare Channel xN.
+ * @param TIMx: where x can be 1 or 8 to select the TIM peripheral.
+ * @param TIM_Channel: specifies the TIM Channel
+ * This parameter can be one of the following values:
+ * @arg TIM_Channel_1: TIM Channel 1
+ * @arg TIM_Channel_2: TIM Channel 2
+ * @arg TIM_Channel_3: TIM Channel 3
+ * @param TIM_CCxN: specifies the TIM Channel CCxNE bit new state.
+ * This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable.
+ * @retval None
+ */
+void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN)
+{
+ uint16_t tmp = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel));
+ assert_param(IS_TIM_CCXN(TIM_CCxN));
+
+ tmp = CCER_CCNE_SET << TIM_Channel;
+
+ /* Reset the CCxNE Bit */
+ TIMx->CCER &= (uint16_t) ~tmp;
+
+ /* Set or reset the CCxNE Bit */
+ TIMx->CCER |= (uint16_t)(TIM_CCxN << TIM_Channel);
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Group3 Input Capture management functions
+ * @brief Input Capture management functions
+ *
+@verbatim
+ ===============================================================================
+ Input Capture management functions
+ ===============================================================================
+
+ ===================================================================
+ TIM Driver: how to use it in Input Capture Mode
+ ===================================================================
+ To use the Timer in Input Capture mode, the following steps are mandatory:
+
+ 1. Enable TIM clock using RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) function
+
+ 2. Configure the TIM pins by configuring the corresponding GPIO pins
+
+ 2. Configure the Time base unit as described in the first part of this driver,
+ if needed, else the Timer will run with the default configuration:
+ - Autoreload value = 0xFFFF
+ - Prescaler value = 0x0000
+ - Counter mode = Up counting
+ - Clock Division = TIM_CKD_DIV1
+
+ 3. Fill the TIM_ICInitStruct with the desired parameters including:
+ - TIM Channel: TIM_Channel
+ - TIM Input Capture polarity: TIM_ICPolarity
+ - TIM Input Capture selection: TIM_ICSelection
+ - TIM Input Capture Prescaler: TIM_ICPrescaler
+ - TIM Input CApture filter value: TIM_ICFilter
+
+ 4. Call TIM_ICInit(TIMx, &TIM_ICInitStruct) to configure the desired channel with the
+ corresponding configuration and to measure only frequency or duty cycle of the input signal,
+ or,
+ Call TIM_PWMIConfig(TIMx, &TIM_ICInitStruct) to configure the desired channels with the
+ corresponding configuration and to measure the frequency and the duty cycle of the input signal
+
+ 5. Enable the NVIC or the DMA to read the measured frequency.
+
+ 6. Enable the corresponding interrupt (or DMA request) to read the Captured value,
+ using the function TIM_ITConfig(TIMx, TIM_IT_CCx) (or TIM_DMA_Cmd(TIMx, TIM_DMA_CCx))
+
+ 7. Call the TIM_Cmd(ENABLE) function to enable the TIM counter.
+
+ 8. Use TIM_GetCapturex(TIMx); to read the captured value.
+
+ Note1: All other functions can be used separately to modify, if needed,
+ a specific feature of the Timer.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the TIM peripheral according to the specified parameters
+ * in the TIM_ICInitStruct.
+ * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
+ * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure that contains
+ * the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity));
+ assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler));
+ assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter));
+
+ if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1)
+ {
+ /* TI1 Configuration */
+ TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2)
+ {
+ /* TI2 Configuration */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3)
+ {
+ /* TI3 Configuration */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else
+ {
+ /* TI4 Configuration */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+ TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+}
+
+/**
+ * @brief Fills each TIM_ICInitStruct member with its default value.
+ * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+ /* Set the default configuration */
+ TIM_ICInitStruct->TIM_Channel = TIM_Channel_1;
+ TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising;
+ TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI;
+ TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1;
+ TIM_ICInitStruct->TIM_ICFilter = 0x00;
+}
+
+/**
+ * @brief Configures the TIM peripheral according to the specified parameters
+ * in the TIM_ICInitStruct to measure an external PWM signal.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5,8, 9 or 12 to select the TIM
+ * peripheral.
+ * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure that contains
+ * the configuration information for the specified TIM peripheral.
+ * @retval None
+ */
+void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+ uint16_t icoppositepolarity = TIM_ICPolarity_Rising;
+ uint16_t icoppositeselection = TIM_ICSelection_DirectTI;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+
+ /* Select the Opposite Input Polarity */
+ if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising)
+ {
+ icoppositepolarity = TIM_ICPolarity_Falling;
+ }
+ else
+ {
+ icoppositepolarity = TIM_ICPolarity_Rising;
+ }
+ /* Select the Opposite Input */
+ if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI)
+ {
+ icoppositeselection = TIM_ICSelection_IndirectTI;
+ }
+ else
+ {
+ icoppositeselection = TIM_ICSelection_DirectTI;
+ }
+ if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1)
+ {
+ /* TI1 Configuration */
+ TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ /* TI2 Configuration */
+ TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+ else
+ {
+ /* TI2 Configuration */
+ TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection,
+ TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ /* TI1 Configuration */
+ TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter);
+ /* Set the Input Capture Prescaler value */
+ TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+ }
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 1 value.
+ * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
+ * @retval Capture Compare 1 Register value.
+ */
+uint32_t TIM_GetCapture1(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+
+ /* Get the Capture 1 Register value */
+ return TIMx->CCR1;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 2 value.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @retval Capture Compare 2 Register value.
+ */
+uint32_t TIM_GetCapture2(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+
+ /* Get the Capture 2 Register value */
+ return TIMx->CCR2;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 3 value.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @retval Capture Compare 3 Register value.
+ */
+uint32_t TIM_GetCapture3(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+
+ /* Get the Capture 3 Register value */
+ return TIMx->CCR3;
+}
+
+/**
+ * @brief Gets the TIMx Input Capture 4 value.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @retval Capture Compare 4 Register value.
+ */
+uint32_t TIM_GetCapture4(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+
+ /* Get the Capture 4 Register value */
+ return TIMx->CCR4;
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 1 prescaler.
+ * @param TIMx: where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture1 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+
+ /* Reset the IC1PSC Bits */
+ TIMx->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC;
+
+ /* Set the IC1PSC value */
+ TIMx->CCMR1 |= TIM_ICPSC;
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 2 prescaler.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture2 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+
+ /* Reset the IC2PSC Bits */
+ TIMx->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC;
+
+ /* Set the IC2PSC value */
+ TIMx->CCMR1 |= (uint16_t)(TIM_ICPSC << 8);
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 3 prescaler.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture3 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+
+ /* Reset the IC3PSC Bits */
+ TIMx->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC;
+
+ /* Set the IC3PSC value */
+ TIMx->CCMR2 |= TIM_ICPSC;
+}
+
+/**
+ * @brief Sets the TIMx Input Capture 4 prescaler.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPSC: specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+
+ /* Reset the IC4PSC Bits */
+ TIMx->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC;
+
+ /* Set the IC4PSC value */
+ TIMx->CCMR2 |= (uint16_t)(TIM_ICPSC << 8);
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Group4 Advanced-control timers (TIM1 and TIM8) specific features
+ * @brief Advanced-control timers (TIM1 and TIM8) specific features
+ *
+@verbatim
+ ===============================================================================
+ Advanced-control timers (TIM1 and TIM8) specific features
+ ===============================================================================
+
+ ===================================================================
+ TIM Driver: how to use the Break feature
+ ===================================================================
+ After configuring the Timer channel(s) in the appropriate Output Compare mode:
+
+ 1. Fill the TIM_BDTRInitStruct with the desired parameters for the Timer
+ Break Polarity, dead time, Lock level, the OSSI/OSSR State and the
+ AOE(automatic output enable).
+
+ 2. Call TIM_BDTRConfig(TIMx, &TIM_BDTRInitStruct) to configure the Timer
+
+ 3. Enable the Main Output using TIM_CtrlPWMOutputs(TIM1, ENABLE)
+
+ 4. Once the break even occurs, the Timer's output signals are put in reset
+ state or in a known state (according to the configuration made in
+ TIM_BDTRConfig() function).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+ * and the AOE(automatic output enable).
+ * @param TIMx: where x can be 1 or 8 to select the TIM
+ * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure that
+ * contains the BDTR Register configuration information for the TIM peripheral.
+ * @retval None
+ */
+void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState));
+ assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState));
+ assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel));
+ assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break));
+ assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity));
+ assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput));
+
+ /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+ the OSSI State, the dead time value and the Automatic Output Enable Bit */
+ TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState |
+ TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime |
+ TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity |
+ TIM_BDTRInitStruct->TIM_AutomaticOutput;
+}
+
+/**
+ * @brief Fills each TIM_BDTRInitStruct member with its default value.
+ * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure which
+ * will be initialized.
+ * @retval None
+ */
+void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct)
+{
+ /* Set the default configuration */
+ TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable;
+ TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable;
+ TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF;
+ TIM_BDTRInitStruct->TIM_DeadTime = 0x00;
+ TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable;
+ TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low;
+ TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable;
+}
+
+/**
+ * @brief Enables or disables the TIM peripheral Main Outputs.
+ * @param TIMx: where x can be 1 or 8 to select the TIMx peripheral.
+ * @param NewState: new state of the TIM peripheral Main Outputs.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the TIM Main Output */
+ TIMx->BDTR |= TIM_BDTR_MOE;
+ }
+ else
+ {
+ /* Disable the TIM Main Output */
+ TIMx->BDTR &= (uint16_t)~TIM_BDTR_MOE;
+ }
+}
+
+/**
+ * @brief Selects the TIM peripheral Commutation event.
+ * @param TIMx: where x can be 1 or 8 to select the TIMx peripheral
+ * @param NewState: new state of the Commutation event.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Set the COM Bit */
+ TIMx->CR2 |= TIM_CR2_CCUS;
+ }
+ else
+ {
+ /* Reset the COM Bit */
+ TIMx->CR2 &= (uint16_t)~TIM_CR2_CCUS;
+ }
+}
+
+/**
+ * @brief Sets or Resets the TIM peripheral Capture Compare Preload Control bit.
+ * @param TIMx: where x can be 1 or 8 to select the TIMx peripheral
+ * @param NewState: new state of the Capture Compare Preload Control bit
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Set the CCPC Bit */
+ TIMx->CR2 |= TIM_CR2_CCPC;
+ }
+ else
+ {
+ /* Reset the CCPC Bit */
+ TIMx->CR2 &= (uint16_t)~TIM_CR2_CCPC;
+ }
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Group5 Interrupts DMA and flags management functions
+ * @brief Interrupts, DMA and flags management functions
+ *
+@verbatim
+ ===============================================================================
+ Interrupts, DMA and flags management functions
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables or disables the specified TIM interrupts.
+ * @param TIMx: where x can be 1 to 14 to select the TIMx peripheral.
+ * @param TIM_IT: specifies the TIM interrupts sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_IT_Update: TIM update Interrupt source
+ * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+ * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+ * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+ * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+ * @arg TIM_IT_COM: TIM Commutation Interrupt source
+ * @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+ * @arg TIM_IT_Break: TIM Break Interrupt source
+ *
+ * @note For TIM6 and TIM7 only the parameter TIM_IT_Update can be used
+ * @note For TIM9 and TIM12 only one of the following parameters can be used: TIM_IT_Update,
+ * TIM_IT_CC1, TIM_IT_CC2 or TIM_IT_Trigger.
+ * @note For TIM10, TIM11, TIM13 and TIM14 only one of the following parameters can
+ * be used: TIM_IT_Update or TIM_IT_CC1
+ * @note TIM_IT_COM and TIM_IT_Break can be used only with TIM1 and TIM8
+ *
+ * @param NewState: new state of the TIM interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_IT(TIM_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the Interrupt sources */
+ TIMx->DIER |= TIM_IT;
+ }
+ else
+ {
+ /* Disable the Interrupt sources */
+ TIMx->DIER &= (uint16_t)~TIM_IT;
+ }
+}
+
+/**
+ * @brief Configures the TIMx event to be generate by software.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @param TIM_EventSource: specifies the event source.
+ * This parameter can be one or more of the following values:
+ * @arg TIM_EventSource_Update: Timer update Event source
+ * @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source
+ * @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source
+ * @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source
+ * @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source
+ * @arg TIM_EventSource_COM: Timer COM event source
+ * @arg TIM_EventSource_Trigger: Timer Trigger Event source
+ * @arg TIM_EventSource_Break: Timer Break event source
+ *
+ * @note TIM6 and TIM7 can only generate an update event.
+ * @note TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1 and TIM8.
+ *
+ * @retval None
+ */
+void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource));
+
+ /* Set the event sources */
+ TIMx->EGR = TIM_EventSource;
+}
+
+/**
+ * @brief Checks whether the specified TIM flag is set or not.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @param TIM_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_FLAG_Update: TIM update Flag
+ * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag
+ * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag
+ * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag
+ * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag
+ * @arg TIM_FLAG_COM: TIM Commutation Flag
+ * @arg TIM_FLAG_Trigger: TIM Trigger Flag
+ * @arg TIM_FLAG_Break: TIM Break Flag
+ * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 over capture Flag
+ * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 over capture Flag
+ * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 over capture Flag
+ * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 over capture Flag
+ *
+ * @note TIM6 and TIM7 can have only one update flag.
+ * @note TIM_FLAG_COM and TIM_FLAG_Break are used only with TIM1 and TIM8.
+ *
+ * @retval The new state of TIM_FLAG (SET or RESET).
+ */
+FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG)
+{
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_GET_FLAG(TIM_FLAG));
+
+
+ if ((TIMx->SR & TIM_FLAG) != (uint16_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the TIMx's pending flags.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @param TIM_FLAG: specifies the flag bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_FLAG_Update: TIM update Flag
+ * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag
+ * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag
+ * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag
+ * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag
+ * @arg TIM_FLAG_COM: TIM Commutation Flag
+ * @arg TIM_FLAG_Trigger: TIM Trigger Flag
+ * @arg TIM_FLAG_Break: TIM Break Flag
+ * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 over capture Flag
+ * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 over capture Flag
+ * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 over capture Flag
+ * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 over capture Flag
+ *
+ * @note TIM6 and TIM7 can have only one update flag.
+ * @note TIM_FLAG_COM and TIM_FLAG_Break are used only with TIM1 and TIM8.
+ *
+ * @retval None
+ */
+void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+
+ /* Clear the flags */
+ TIMx->SR = (uint16_t)~TIM_FLAG;
+}
+
+/**
+ * @brief Checks whether the TIM interrupt has occurred or not.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @param TIM_IT: specifies the TIM interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg TIM_IT_Update: TIM update Interrupt source
+ * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+ * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+ * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+ * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+ * @arg TIM_IT_COM: TIM Commutation Interrupt source
+ * @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+ * @arg TIM_IT_Break: TIM Break Interrupt source
+ *
+ * @note TIM6 and TIM7 can generate only an update interrupt.
+ * @note TIM_IT_COM and TIM_IT_Break are used only with TIM1 and TIM8.
+ *
+ * @retval The new state of the TIM_IT(SET or RESET).
+ */
+ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT)
+{
+ ITStatus bitstatus = RESET;
+ uint16_t itstatus = 0x0, itenable = 0x0;
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+ assert_param(IS_TIM_GET_IT(TIM_IT));
+
+ itstatus = TIMx->SR & TIM_IT;
+
+ itenable = TIMx->DIER & TIM_IT;
+ if ((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the TIMx's interrupt pending bits.
+ * @param TIMx: where x can be 1 to 14 to select the TIM peripheral.
+ * @param TIM_IT: specifies the pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_IT_Update: TIM1 update Interrupt source
+ * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+ * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+ * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+ * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+ * @arg TIM_IT_COM: TIM Commutation Interrupt source
+ * @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+ * @arg TIM_IT_Break: TIM Break Interrupt source
+ *
+ * @note TIM6 and TIM7 can generate only an update interrupt.
+ * @note TIM_IT_COM and TIM_IT_Break are used only with TIM1 and TIM8.
+ *
+ * @retval None
+ */
+void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_ALL_PERIPH(TIMx));
+
+ /* Clear the IT pending Bit */
+ TIMx->SR = (uint16_t)~TIM_IT;
+}
+
+/**
+ * @brief Configures the TIMx's DMA interface.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_DMABase: DMA Base address.
+ * This parameter can be one of the following values:
+ * @arg TIM_DMABase_CR1
+ * @arg TIM_DMABase_CR2
+ * @arg TIM_DMABase_SMCR
+ * @arg TIM_DMABase_DIER
+ * @arg TIM1_DMABase_SR
+ * @arg TIM_DMABase_EGR
+ * @arg TIM_DMABase_CCMR1
+ * @arg TIM_DMABase_CCMR2
+ * @arg TIM_DMABase_CCER
+ * @arg TIM_DMABase_CNT
+ * @arg TIM_DMABase_PSC
+ * @arg TIM_DMABase_ARR
+ * @arg TIM_DMABase_RCR
+ * @arg TIM_DMABase_CCR1
+ * @arg TIM_DMABase_CCR2
+ * @arg TIM_DMABase_CCR3
+ * @arg TIM_DMABase_CCR4
+ * @arg TIM_DMABase_BDTR
+ * @arg TIM_DMABase_DCR
+ * @param TIM_DMABurstLength: DMA Burst length. This parameter can be one value
+ * between: TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers.
+ * @retval None
+ */
+void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_DMA_BASE(TIM_DMABase));
+ assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength));
+
+ /* Set the DMA Base and the DMA Burst Length */
+ TIMx->DCR = TIM_DMABase | TIM_DMABurstLength;
+}
+
+/**
+ * @brief Enables or disables the TIMx's DMA Requests.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the TIM peripheral.
+ * @param TIM_DMASource: specifies the DMA Request sources.
+ * This parameter can be any combination of the following values:
+ * @arg TIM_DMA_Update: TIM update Interrupt source
+ * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+ * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+ * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+ * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+ * @arg TIM_DMA_COM: TIM Commutation DMA source
+ * @arg TIM_DMA_Trigger: TIM Trigger DMA source
+ * @param NewState: new state of the DMA Request sources.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST5_PERIPH(TIMx));
+ assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the DMA sources */
+ TIMx->DIER |= TIM_DMASource;
+ }
+ else
+ {
+ /* Disable the DMA sources */
+ TIMx->DIER &= (uint16_t)~TIM_DMASource;
+ }
+}
+
+/**
+ * @brief Selects the TIMx peripheral Capture Compare DMA source.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param NewState: new state of the Capture Compare DMA source
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Set the CCDS Bit */
+ TIMx->CR2 |= TIM_CR2_CCDS;
+ }
+ else
+ {
+ /* Reset the CCDS Bit */
+ TIMx->CR2 &= (uint16_t)~TIM_CR2_CCDS;
+ }
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Group6 Clocks management functions
+ * @brief Clocks management functions
+ *
+@verbatim
+ ===============================================================================
+ Clocks management functions
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the TIMx internal Clock
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @retval None
+ */
+void TIM_InternalClockConfig(TIM_TypeDef* TIMx)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+
+ /* Disable slave mode to clock the prescaler directly with the internal clock */
+ TIMx->SMCR &= (uint16_t)~TIM_SMCR_SMS;
+}
+
+/**
+ * @brief Configures the TIMx Internal Trigger as External Clock
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @param TIM_InputTriggerSource: Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal Trigger 0
+ * @arg TIM_TS_ITR1: Internal Trigger 1
+ * @arg TIM_TS_ITR2: Internal Trigger 2
+ * @arg TIM_TS_ITR3: Internal Trigger 3
+ * @retval None
+ */
+void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource));
+
+ /* Select the Internal Trigger */
+ TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource);
+
+ /* Select the External clock mode1 */
+ TIMx->SMCR |= TIM_SlaveMode_External1;
+}
+
+/**
+ * @brief Configures the TIMx Trigger as External Clock
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13 or 14
+ * to select the TIM peripheral.
+ * @param TIM_TIxExternalCLKSource: Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector
+ * @arg TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1
+ * @arg TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2
+ * @param TIM_ICPolarity: specifies the TIx Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @param ICFilter: specifies the filter value.
+ * This parameter must be a value between 0x0 and 0xF.
+ * @retval None
+ */
+void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource,
+ uint16_t TIM_ICPolarity, uint16_t ICFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity));
+ assert_param(IS_TIM_IC_FILTER(ICFilter));
+
+ /* Configure the Timer Input Clock Source */
+ if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2)
+ {
+ TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter);
+ }
+ else
+ {
+ TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter);
+ }
+ /* Select the Trigger source */
+ TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource);
+ /* Select the External clock mode1 */
+ TIMx->SMCR |= TIM_SlaveMode_External1;
+}
+
+/**
+ * @brief Configures the External clock Mode1
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler,
+ uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter)
+{
+ uint16_t tmpsmcr = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+ assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+ assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+ /* Configure the ETR Clock source */
+ TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter);
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+
+ /* Reset the SMS Bits */
+ tmpsmcr &= (uint16_t)~TIM_SMCR_SMS;
+
+ /* Select the External clock mode1 */
+ tmpsmcr |= TIM_SlaveMode_External1;
+
+ /* Select the Trigger selection : ETRF */
+ tmpsmcr &= (uint16_t)~TIM_SMCR_TS;
+ tmpsmcr |= TIM_TS_ETRF;
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Configures the External clock Mode2
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler,
+ uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+ assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+ assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+
+ /* Configure the ETR Clock source */
+ TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter);
+
+ /* Enable the External clock mode2 */
+ TIMx->SMCR |= TIM_SMCR_ECE;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Group7 Synchronization management functions
+ * @brief Synchronization management functions
+ *
+@verbatim
+ ===============================================================================
+ Synchronization management functions
+ ===============================================================================
+
+ ===================================================================
+ TIM Driver: how to use it in synchronization Mode
+ ===================================================================
+ Case of two/several Timers
+ **************************
+ 1. Configure the Master Timers using the following functions:
+ - void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource);
+ - void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode);
+ 2. Configure the Slave Timers using the following functions:
+ - void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
+ - void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode);
+
+ Case of Timers and external trigger(ETR pin)
+ ********************************************
+ 1. Configure the External trigger using this function:
+ - void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter);
+ 2. Configure the Slave Timers using the following functions:
+ - void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
+ - void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode);
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Selects the Input Trigger source
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13 or 14
+ * to select the TIM peripheral.
+ * @param TIM_InputTriggerSource: The Input Trigger source.
+ * This parameter can be one of the following values:
+ * @arg TIM_TS_ITR0: Internal Trigger 0
+ * @arg TIM_TS_ITR1: Internal Trigger 1
+ * @arg TIM_TS_ITR2: Internal Trigger 2
+ * @arg TIM_TS_ITR3: Internal Trigger 3
+ * @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+ * @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+ * @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+ * @arg TIM_TS_ETRF: External Trigger input
+ * @retval None
+ */
+void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource)
+{
+ uint16_t tmpsmcr = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+ assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource));
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+
+ /* Reset the TS Bits */
+ tmpsmcr &= (uint16_t)~TIM_SMCR_TS;
+
+ /* Set the Input Trigger source */
+ tmpsmcr |= TIM_InputTriggerSource;
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+
+/**
+ * @brief Selects the TIMx Trigger Output Mode.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 6, 7 or 8 to select the TIM peripheral.
+ *
+ * @param TIM_TRGOSource: specifies the Trigger Output source.
+ * This parameter can be one of the following values:
+ *
+ * - For all TIMx
+ * @arg TIM_TRGOSource_Reset: The UG bit in the TIM_EGR register is used as the trigger output(TRGO)
+ * @arg TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output(TRGO)
+ * @arg TIM_TRGOSource_Update: The update event is selected as the trigger output(TRGO)
+ *
+ * - For all TIMx except TIM6 and TIM7
+ * @arg TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag
+ * is to be set, as soon as a capture or compare match occurs(TRGO)
+ * @arg TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output(TRGO)
+ * @arg TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output(TRGO)
+ * @arg TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output(TRGO)
+ * @arg TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output(TRGO)
+ *
+ * @retval None
+ */
+void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST5_PERIPH(TIMx));
+ assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource));
+
+ /* Reset the MMS Bits */
+ TIMx->CR2 &= (uint16_t)~TIM_CR2_MMS;
+ /* Select the TRGO source */
+ TIMx->CR2 |= TIM_TRGOSource;
+}
+
+/**
+ * @brief Selects the TIMx Slave Mode.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
+ * @param TIM_SlaveMode: specifies the Timer Slave Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal(TRGI) reinitialize
+ * the counter and triggers an update of the registers
+ * @arg TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high
+ * @arg TIM_SlaveMode_Trigger: The counter starts at a rising edge of the trigger TRGI
+ * @arg TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter
+ * @retval None
+ */
+void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode));
+
+ /* Reset the SMS Bits */
+ TIMx->SMCR &= (uint16_t)~TIM_SMCR_SMS;
+
+ /* Select the Slave Mode */
+ TIMx->SMCR |= TIM_SlaveMode;
+}
+
+/**
+ * @brief Sets or Resets the TIMx Master/Slave Mode.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
+ * @param TIM_MasterSlaveMode: specifies the Timer Master Slave Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer
+ * and its slaves (through TRGO)
+ * @arg TIM_MasterSlaveMode_Disable: No action
+ * @retval None
+ */
+void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode));
+
+ /* Reset the MSM Bit */
+ TIMx->SMCR &= (uint16_t)~TIM_SMCR_MSM;
+
+ /* Set or Reset the MSM Bit */
+ TIMx->SMCR |= TIM_MasterSlaveMode;
+}
+
+/**
+ * @brief Configures the TIMx External Trigger (ETR).
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+ * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+ * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+ * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+ * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+ * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+ * @param ExtTRGFilter: External Trigger Filter.
+ * This parameter must be a value between 0x00 and 0x0F
+ * @retval None
+ */
+void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler,
+ uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter)
+{
+ uint16_t tmpsmcr = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+ assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+ assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+ assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+
+ tmpsmcr = TIMx->SMCR;
+
+ /* Reset the ETR Bits */
+ tmpsmcr &= SMCR_ETR_MASK;
+
+ /* Set the Prescaler, the Filter value and the Polarity */
+ tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8)));
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Group8 Specific interface management functions
+ * @brief Specific interface management functions
+ *
+@verbatim
+ ===============================================================================
+ Specific interface management functions
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the TIMx Encoder Interface.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @param TIM_EncoderMode: specifies the TIMx Encoder Mode.
+ * This parameter can be one of the following values:
+ * @arg TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level.
+ * @arg TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level.
+ * @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending
+ * on the level of the other input.
+ * @param TIM_IC1Polarity: specifies the IC1 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Falling: IC Falling edge.
+ * @arg TIM_ICPolarity_Rising: IC Rising edge.
+ * @param TIM_IC2Polarity: specifies the IC2 Polarity
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Falling: IC Falling edge.
+ * @arg TIM_ICPolarity_Rising: IC Rising edge.
+ * @retval None
+ */
+void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode,
+ uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity)
+{
+ uint16_t tmpsmcr = 0;
+ uint16_t tmpccmr1 = 0;
+ uint16_t tmpccer = 0;
+
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode));
+ assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity));
+ assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity));
+
+ /* Get the TIMx SMCR register value */
+ tmpsmcr = TIMx->SMCR;
+
+ /* Get the TIMx CCMR1 register value */
+ tmpccmr1 = TIMx->CCMR1;
+
+ /* Get the TIMx CCER register value */
+ tmpccer = TIMx->CCER;
+
+ /* Set the encoder Mode */
+ tmpsmcr &= (uint16_t)~TIM_SMCR_SMS;
+ tmpsmcr |= TIM_EncoderMode;
+
+ /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+ tmpccmr1 &= ((uint16_t)~TIM_CCMR1_CC1S) & ((uint16_t)~TIM_CCMR1_CC2S);
+ tmpccmr1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0;
+
+ /* Set the TI1 and the TI2 Polarities */
+ tmpccer &= ((uint16_t)~TIM_CCER_CC1P) & ((uint16_t)~TIM_CCER_CC2P);
+ tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4));
+
+ /* Write to TIMx SMCR */
+ TIMx->SMCR = tmpsmcr;
+
+ /* Write to TIMx CCMR1 */
+ TIMx->CCMR1 = tmpccmr1;
+
+ /* Write to TIMx CCER */
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Enables or disables the TIMx's Hall sensor interface.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @param NewState: new state of the TIMx Hall sensor interface.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Set the TI1S Bit */
+ TIMx->CR2 |= TIM_CR2_TI1S;
+ }
+ else
+ {
+ /* Reset the TI1S Bit */
+ TIMx->CR2 &= (uint16_t)~TIM_CR2_TI1S;
+ }
+}
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Group9 Specific remapping management function
+ * @brief Specific remapping management function
+ *
+@verbatim
+ ===============================================================================
+ Specific remapping management function
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the TIM2, TIM5 and TIM11 Remapping input capabilities.
+ * @param TIMx: where x can be 2, 5 or 11 to select the TIM peripheral.
+ * @param TIM_Remap: specifies the TIM input remapping source.
+ * This parameter can be one of the following values:
+ * @arg TIM2_TIM8_TRGO: TIM2 ITR1 input is connected to TIM8 Trigger output(default)
+ * @arg TIM2_ETH_PTP: TIM2 ITR1 input is connected to ETH PTP trogger output.
+ * @arg TIM2_USBFS_SOF: TIM2 ITR1 input is connected to USB FS SOF.
+ * @arg TIM2_USBHS_SOF: TIM2 ITR1 input is connected to USB HS SOF.
+ * @arg TIM5_GPIO: TIM5 CH4 input is connected to dedicated Timer pin(default)
+ * @arg TIM5_LSI: TIM5 CH4 input is connected to LSI clock.
+ * @arg TIM5_LSE: TIM5 CH4 input is connected to LSE clock.
+ * @arg TIM5_RTC: TIM5 CH4 input is connected to RTC Output event.
+ * @arg TIM11_GPIO: TIM11 CH4 input is connected to dedicated Timer pin(default)
+ * @arg TIM11_HSE: TIM11 CH4 input is connected to HSE_RTC clock
+ * (HSE divided by a programmable prescaler)
+ * @retval None
+ */
+void TIM_RemapConfig(TIM_TypeDef* TIMx, uint16_t TIM_Remap)
+{
+ /* Check the parameters */
+ assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+ assert_param(IS_TIM_REMAP(TIM_Remap));
+
+ /* Set the Timer remapping configuration */
+ TIMx->OR = TIM_Remap;
+}
+/**
+ * @}
+ */
+
+/**
+ * @brief Configure the TI1 as Input.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13 or 14
+ * to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr1 = 0, tmpccer = 0;
+
+ /* Disable the Channel 1: Reset the CC1E Bit */
+ TIMx->CCER &= (uint16_t)~TIM_CCER_CC1E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+
+ /* Select the Input and set the filter */
+ tmpccmr1 &= ((uint16_t)~TIM_CCMR1_CC1S) & ((uint16_t)~TIM_CCMR1_IC1F);
+ tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4));
+
+ /* Select the Polarity and set the CC1E Bit */
+ tmpccer &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+ tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI2 as Input.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM
+ * peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1.
+ * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0;
+
+ /* Disable the Channel 2: Reset the CC2E Bit */
+ TIMx->CCER &= (uint16_t)~TIM_CCER_CC2E;
+ tmpccmr1 = TIMx->CCMR1;
+ tmpccer = TIMx->CCER;
+ tmp = (uint16_t)(TIM_ICPolarity << 4);
+
+ /* Select the Input and set the filter */
+ tmpccmr1 &= ((uint16_t)~TIM_CCMR1_CC2S) & ((uint16_t)~TIM_CCMR1_IC2F);
+ tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12);
+ tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8);
+
+ /* Select the Polarity and set the CC2E Bit */
+ tmpccer &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+ tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC2E);
+
+ /* Write to TIMx CCMR1 and CCER registers */
+ TIMx->CCMR1 = tmpccmr1 ;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI3 as Input.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0;
+
+ /* Disable the Channel 3: Reset the CC3E Bit */
+ TIMx->CCER &= (uint16_t)~TIM_CCER_CC3E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+ tmp = (uint16_t)(TIM_ICPolarity << 8);
+
+ /* Select the Input and set the filter */
+ tmpccmr2 &= ((uint16_t)~TIM_CCMR1_CC1S) & ((uint16_t)~TIM_CCMR2_IC3F);
+ tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4));
+
+ /* Select the Polarity and set the CC3E Bit */
+ tmpccer &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
+ tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC3E);
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer;
+}
+
+/**
+ * @brief Configure the TI4 as Input.
+ * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+ * @param TIM_ICPolarity : The Input Polarity.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPolarity_Rising
+ * @arg TIM_ICPolarity_Falling
+ * @arg TIM_ICPolarity_BothEdge
+ * @param TIM_ICSelection: specifies the input to be used.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4.
+ * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3.
+ * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
+ * @param TIM_ICFilter: Specifies the Input Capture Filter.
+ * This parameter must be a value between 0x00 and 0x0F.
+ * @retval None
+ */
+static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+ uint16_t TIM_ICFilter)
+{
+ uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0;
+
+ /* Disable the Channel 4: Reset the CC4E Bit */
+ TIMx->CCER &= (uint16_t)~TIM_CCER_CC4E;
+ tmpccmr2 = TIMx->CCMR2;
+ tmpccer = TIMx->CCER;
+ tmp = (uint16_t)(TIM_ICPolarity << 12);
+
+ /* Select the Input and set the filter */
+ tmpccmr2 &= ((uint16_t)~TIM_CCMR1_CC2S) & ((uint16_t)~TIM_CCMR1_IC2F);
+ tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8);
+ tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12);
+
+ /* Select the Polarity and set the CC4E Bit */
+ tmpccer &= (uint16_t)~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
+ tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC4E);
+
+ /* Write to TIMx CCMR2 and CCER registers */
+ TIMx->CCMR2 = tmpccmr2;
+ TIMx->CCER = tmpccer ;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff -r 4985455162fc -r 1c6281289d67 stm32f4xx_tim.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32f4xx_tim.h Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,1145 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_tim.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 30-September-2011
+ * @brief This file contains all the functions prototypes for the TIM firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_TIM_H
+#define __STM32F4xx_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief TIM Time Base Init structure definition
+ * @note This structure is used with all TIMx except for TIM6 and TIM7.
+ */
+
+typedef struct
+{
+ uint16_t TIM_Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between 0x0000 and 0xFFFF */
+
+ uint16_t TIM_CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t TIM_Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter must be a number between 0x0000 and 0xFFFF. */
+
+ uint16_t TIM_ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_Clock_Division_CKD */
+
+ uint8_t TIM_RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between 0x00 and 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_TimeBaseInitTypeDef;
+
+/**
+ * @brief TIM Output Compare Init structure definition
+ */
+
+typedef struct
+{
+ uint16_t TIM_OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint16_t TIM_OutputState; /*!< Specifies the TIM Output Compare state.
+ This parameter can be a value of @ref TIM_Output_Compare_State */
+
+ uint16_t TIM_OutputNState; /*!< Specifies the TIM complementary Output Compare state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t TIM_Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between 0x0000 and 0xFFFF */
+
+ uint16_t TIM_OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint16_t TIM_OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint16_t TIM_OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint16_t TIM_OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OCInitTypeDef;
+
+/**
+ * @brief TIM Input Capture Init structure definition
+ */
+
+typedef struct
+{
+
+ uint16_t TIM_Channel; /*!< Specifies the TIM channel.
+ This parameter can be a value of @ref TIM_Channel */
+
+ uint16_t TIM_ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint16_t TIM_ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint16_t TIM_ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint16_t TIM_ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between 0x0 and 0xF */
+} TIM_ICInitTypeDef;
+
+/**
+ * @brief BDTR structure definition
+ * @note This structure is used only with TIM1 and TIM8.
+ */
+
+typedef struct
+{
+
+ uint16_t TIM_OSSRState; /*!< Specifies the Off-State selection used in Run mode.
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+
+ uint16_t TIM_OSSIState; /*!< Specifies the Off-State used in Idle state.
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+
+ uint16_t TIM_LOCKLevel; /*!< Specifies the LOCK level parameters.
+ This parameter can be a value of @ref TIM_Lock_level */
+
+ uint16_t TIM_DeadTime; /*!< Specifies the delay time between the switching-off and the
+ switching-on of the outputs.
+ This parameter can be a number between 0x00 and 0xFF */
+
+ uint16_t TIM_Break; /*!< Specifies whether the TIM Break input is enabled or not.
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+
+ uint16_t TIM_BreakPolarity; /*!< Specifies the TIM Break Input pin polarity.
+ This parameter can be a value of @ref TIM_Break_Polarity */
+
+ uint16_t TIM_AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not.
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BDTRInitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup TIM_Exported_constants
+ * @{
+ */
+
+#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM6) || \
+ ((PERIPH) == TIM7) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM10) || \
+ ((PERIPH) == TIM11) || \
+ ((PERIPH) == TIM12) || \
+ (((PERIPH) == TIM13) || \
+ ((PERIPH) == TIM14)))
+/* LIST1: TIM1, TIM2, TIM3, TIM4, TIM5, TIM8, TIM9, TIM10, TIM11, TIM12, TIM13 and TIM14 */
+#define IS_TIM_LIST1_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM10) || \
+ ((PERIPH) == TIM11) || \
+ ((PERIPH) == TIM12) || \
+ ((PERIPH) == TIM13) || \
+ ((PERIPH) == TIM14))
+
+/* LIST2: TIM1, TIM2, TIM3, TIM4, TIM5, TIM8, TIM9 and TIM12 */
+#define IS_TIM_LIST2_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8) || \
+ ((PERIPH) == TIM9) || \
+ ((PERIPH) == TIM12))
+/* LIST3: TIM1, TIM2, TIM3, TIM4, TIM5 and TIM8 */
+#define IS_TIM_LIST3_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM8))
+/* LIST4: TIM1 and TIM8 */
+#define IS_TIM_LIST4_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM8))
+/* LIST5: TIM1, TIM2, TIM3, TIM4, TIM5, TIM6, TIM7 and TIM8 */
+#define IS_TIM_LIST5_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+ ((PERIPH) == TIM2) || \
+ ((PERIPH) == TIM3) || \
+ ((PERIPH) == TIM4) || \
+ ((PERIPH) == TIM5) || \
+ ((PERIPH) == TIM6) || \
+ ((PERIPH) == TIM7) || \
+ ((PERIPH) == TIM8))
+/* LIST6: TIM2, TIM5 and TIM11 */
+#define IS_TIM_LIST6_PERIPH(TIMx)(((TIMx) == TIM2) || \
+ ((TIMx) == TIM5) || \
+ ((TIMx) == TIM11))
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes
+ * @{
+ */
+
+#define TIM_OCMode_Timing ((uint16_t)0x0000)
+#define TIM_OCMode_Active ((uint16_t)0x0010)
+#define TIM_OCMode_Inactive ((uint16_t)0x0020)
+#define TIM_OCMode_Toggle ((uint16_t)0x0030)
+#define TIM_OCMode_PWM1 ((uint16_t)0x0060)
+#define TIM_OCMode_PWM2 ((uint16_t)0x0070)
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \
+ ((MODE) == TIM_OCMode_Active) || \
+ ((MODE) == TIM_OCMode_Inactive) || \
+ ((MODE) == TIM_OCMode_Toggle)|| \
+ ((MODE) == TIM_OCMode_PWM1) || \
+ ((MODE) == TIM_OCMode_PWM2))
+#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \
+ ((MODE) == TIM_OCMode_Active) || \
+ ((MODE) == TIM_OCMode_Inactive) || \
+ ((MODE) == TIM_OCMode_Toggle)|| \
+ ((MODE) == TIM_OCMode_PWM1) || \
+ ((MODE) == TIM_OCMode_PWM2) || \
+ ((MODE) == TIM_ForcedAction_Active) || \
+ ((MODE) == TIM_ForcedAction_InActive))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode
+ * @{
+ */
+
+#define TIM_OPMode_Single ((uint16_t)0x0008)
+#define TIM_OPMode_Repetitive ((uint16_t)0x0000)
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \
+ ((MODE) == TIM_OPMode_Repetitive))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel
+ * @{
+ */
+
+#define TIM_Channel_1 ((uint16_t)0x0000)
+#define TIM_Channel_2 ((uint16_t)0x0004)
+#define TIM_Channel_3 ((uint16_t)0x0008)
+#define TIM_Channel_4 ((uint16_t)0x000C)
+
+#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+ ((CHANNEL) == TIM_Channel_2) || \
+ ((CHANNEL) == TIM_Channel_3) || \
+ ((CHANNEL) == TIM_Channel_4))
+
+#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+ ((CHANNEL) == TIM_Channel_2))
+#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+ ((CHANNEL) == TIM_Channel_2) || \
+ ((CHANNEL) == TIM_Channel_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Division_CKD
+ * @{
+ */
+
+#define TIM_CKD_DIV1 ((uint16_t)0x0000)
+#define TIM_CKD_DIV2 ((uint16_t)0x0100)
+#define TIM_CKD_DIV4 ((uint16_t)0x0200)
+#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \
+ ((DIV) == TIM_CKD_DIV2) || \
+ ((DIV) == TIM_CKD_DIV4))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode
+ * @{
+ */
+
+#define TIM_CounterMode_Up ((uint16_t)0x0000)
+#define TIM_CounterMode_Down ((uint16_t)0x0010)
+#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020)
+#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040)
+#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060)
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \
+ ((MODE) == TIM_CounterMode_Down) || \
+ ((MODE) == TIM_CounterMode_CenterAligned1) || \
+ ((MODE) == TIM_CounterMode_CenterAligned2) || \
+ ((MODE) == TIM_CounterMode_CenterAligned3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity
+ * @{
+ */
+
+#define TIM_OCPolarity_High ((uint16_t)0x0000)
+#define TIM_OCPolarity_Low ((uint16_t)0x0002)
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \
+ ((POLARITY) == TIM_OCPolarity_Low))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity
+ * @{
+ */
+
+#define TIM_OCNPolarity_High ((uint16_t)0x0000)
+#define TIM_OCNPolarity_Low ((uint16_t)0x0008)
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \
+ ((POLARITY) == TIM_OCNPolarity_Low))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_State
+ * @{
+ */
+
+#define TIM_OutputState_Disable ((uint16_t)0x0000)
+#define TIM_OutputState_Enable ((uint16_t)0x0001)
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \
+ ((STATE) == TIM_OutputState_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_State
+ * @{
+ */
+
+#define TIM_OutputNState_Disable ((uint16_t)0x0000)
+#define TIM_OutputNState_Enable ((uint16_t)0x0004)
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \
+ ((STATE) == TIM_OutputNState_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Capture_Compare_State
+ * @{
+ */
+
+#define TIM_CCx_Enable ((uint16_t)0x0001)
+#define TIM_CCx_Disable ((uint16_t)0x0000)
+#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \
+ ((CCX) == TIM_CCx_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Capture_Compare_N_State
+ * @{
+ */
+
+#define TIM_CCxN_Enable ((uint16_t)0x0004)
+#define TIM_CCxN_Disable ((uint16_t)0x0000)
+#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \
+ ((CCXN) == TIM_CCxN_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Input_enable_disable
+ * @{
+ */
+
+#define TIM_Break_Enable ((uint16_t)0x1000)
+#define TIM_Break_Disable ((uint16_t)0x0000)
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \
+ ((STATE) == TIM_Break_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Polarity
+ * @{
+ */
+
+#define TIM_BreakPolarity_Low ((uint16_t)0x0000)
+#define TIM_BreakPolarity_High ((uint16_t)0x2000)
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \
+ ((POLARITY) == TIM_BreakPolarity_High))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AOE_Bit_Set_Reset
+ * @{
+ */
+
+#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000)
+#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000)
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \
+ ((STATE) == TIM_AutomaticOutput_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Lock_level
+ * @{
+ */
+
+#define TIM_LOCKLevel_OFF ((uint16_t)0x0000)
+#define TIM_LOCKLevel_1 ((uint16_t)0x0100)
+#define TIM_LOCKLevel_2 ((uint16_t)0x0200)
+#define TIM_LOCKLevel_3 ((uint16_t)0x0300)
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \
+ ((LEVEL) == TIM_LOCKLevel_1) || \
+ ((LEVEL) == TIM_LOCKLevel_2) || \
+ ((LEVEL) == TIM_LOCKLevel_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state
+ * @{
+ */
+
+#define TIM_OSSIState_Enable ((uint16_t)0x0400)
+#define TIM_OSSIState_Disable ((uint16_t)0x0000)
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \
+ ((STATE) == TIM_OSSIState_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state
+ * @{
+ */
+
+#define TIM_OSSRState_Enable ((uint16_t)0x0800)
+#define TIM_OSSRState_Disable ((uint16_t)0x0000)
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \
+ ((STATE) == TIM_OSSRState_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State
+ * @{
+ */
+
+#define TIM_OCIdleState_Set ((uint16_t)0x0100)
+#define TIM_OCIdleState_Reset ((uint16_t)0x0000)
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \
+ ((STATE) == TIM_OCIdleState_Reset))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State
+ * @{
+ */
+
+#define TIM_OCNIdleState_Set ((uint16_t)0x0200)
+#define TIM_OCNIdleState_Reset ((uint16_t)0x0000)
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \
+ ((STATE) == TIM_OCNIdleState_Reset))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity
+ * @{
+ */
+
+#define TIM_ICPolarity_Rising ((uint16_t)0x0000)
+#define TIM_ICPolarity_Falling ((uint16_t)0x0002)
+#define TIM_ICPolarity_BothEdge ((uint16_t)0x000A)
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \
+ ((POLARITY) == TIM_ICPolarity_Falling)|| \
+ ((POLARITY) == TIM_ICPolarity_BothEdge))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection
+ * @{
+ */
+
+#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively. */
+#define TIM_ICSelection_TRC ((uint16_t)0x0003) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \
+ ((SELECTION) == TIM_ICSelection_IndirectTI) || \
+ ((SELECTION) == TIM_ICSelection_TRC))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler
+ * @{
+ */
+
+#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input. */
+#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /*!< Capture performed once every 2 events. */
+#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /*!< Capture performed once every 4 events. */
+#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /*!< Capture performed once every 8 events. */
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_interrupt_sources
+ * @{
+ */
+
+#define TIM_IT_Update ((uint16_t)0x0001)
+#define TIM_IT_CC1 ((uint16_t)0x0002)
+#define TIM_IT_CC2 ((uint16_t)0x0004)
+#define TIM_IT_CC3 ((uint16_t)0x0008)
+#define TIM_IT_CC4 ((uint16_t)0x0010)
+#define TIM_IT_COM ((uint16_t)0x0020)
+#define TIM_IT_Trigger ((uint16_t)0x0040)
+#define TIM_IT_Break ((uint16_t)0x0080)
+#define IS_TIM_IT(IT) ((((IT) & (uint16_t)0xFF00) == 0x0000) && ((IT) != 0x0000))
+
+#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \
+ ((IT) == TIM_IT_CC1) || \
+ ((IT) == TIM_IT_CC2) || \
+ ((IT) == TIM_IT_CC3) || \
+ ((IT) == TIM_IT_CC4) || \
+ ((IT) == TIM_IT_COM) || \
+ ((IT) == TIM_IT_Trigger) || \
+ ((IT) == TIM_IT_Break))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address
+ * @{
+ */
+
+#define TIM_DMABase_CR1 ((uint16_t)0x0000)
+#define TIM_DMABase_CR2 ((uint16_t)0x0001)
+#define TIM_DMABase_SMCR ((uint16_t)0x0002)
+#define TIM_DMABase_DIER ((uint16_t)0x0003)
+#define TIM_DMABase_SR ((uint16_t)0x0004)
+#define TIM_DMABase_EGR ((uint16_t)0x0005)
+#define TIM_DMABase_CCMR1 ((uint16_t)0x0006)
+#define TIM_DMABase_CCMR2 ((uint16_t)0x0007)
+#define TIM_DMABase_CCER ((uint16_t)0x0008)
+#define TIM_DMABase_CNT ((uint16_t)0x0009)
+#define TIM_DMABase_PSC ((uint16_t)0x000A)
+#define TIM_DMABase_ARR ((uint16_t)0x000B)
+#define TIM_DMABase_RCR ((uint16_t)0x000C)
+#define TIM_DMABase_CCR1 ((uint16_t)0x000D)
+#define TIM_DMABase_CCR2 ((uint16_t)0x000E)
+#define TIM_DMABase_CCR3 ((uint16_t)0x000F)
+#define TIM_DMABase_CCR4 ((uint16_t)0x0010)
+#define TIM_DMABase_BDTR ((uint16_t)0x0011)
+#define TIM_DMABase_DCR ((uint16_t)0x0012)
+#define TIM_DMABase_OR ((uint16_t)0x0013)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_DCR) || \
+ ((BASE) == TIM_DMABase_OR))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length
+ * @{
+ */
+
+#define TIM_DMABurstLength_1Transfer ((uint16_t)0x0000)
+#define TIM_DMABurstLength_2Transfers ((uint16_t)0x0100)
+#define TIM_DMABurstLength_3Transfers ((uint16_t)0x0200)
+#define TIM_DMABurstLength_4Transfers ((uint16_t)0x0300)
+#define TIM_DMABurstLength_5Transfers ((uint16_t)0x0400)
+#define TIM_DMABurstLength_6Transfers ((uint16_t)0x0500)
+#define TIM_DMABurstLength_7Transfers ((uint16_t)0x0600)
+#define TIM_DMABurstLength_8Transfers ((uint16_t)0x0700)
+#define TIM_DMABurstLength_9Transfers ((uint16_t)0x0800)
+#define TIM_DMABurstLength_10Transfers ((uint16_t)0x0900)
+#define TIM_DMABurstLength_11Transfers ((uint16_t)0x0A00)
+#define TIM_DMABurstLength_12Transfers ((uint16_t)0x0B00)
+#define TIM_DMABurstLength_13Transfers ((uint16_t)0x0C00)
+#define TIM_DMABurstLength_14Transfers ((uint16_t)0x0D00)
+#define TIM_DMABurstLength_15Transfers ((uint16_t)0x0E00)
+#define TIM_DMABurstLength_16Transfers ((uint16_t)0x0F00)
+#define TIM_DMABurstLength_17Transfers ((uint16_t)0x1000)
+#define TIM_DMABurstLength_18Transfers ((uint16_t)0x1100)
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
+ ((LENGTH) == TIM_DMABurstLength_2Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_3Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_4Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_5Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_6Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_7Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_8Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_9Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_10Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_11Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_12Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_13Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_14Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_15Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_16Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_17Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_18Transfers))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_sources
+ * @{
+ */
+
+#define TIM_DMA_Update ((uint16_t)0x0100)
+#define TIM_DMA_CC1 ((uint16_t)0x0200)
+#define TIM_DMA_CC2 ((uint16_t)0x0400)
+#define TIM_DMA_CC3 ((uint16_t)0x0800)
+#define TIM_DMA_CC4 ((uint16_t)0x1000)
+#define TIM_DMA_COM ((uint16_t)0x2000)
+#define TIM_DMA_Trigger ((uint16_t)0x4000)
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0x80FF) == 0x0000) && ((SOURCE) != 0x0000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_External_Trigger_Prescaler
+ * @{
+ */
+
+#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000)
+#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000)
+#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000)
+#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000)
+#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \
+ ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \
+ ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \
+ ((PRESCALER) == TIM_ExtTRGPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Internal_Trigger_Selection
+ * @{
+ */
+
+#define TIM_TS_ITR0 ((uint16_t)0x0000)
+#define TIM_TS_ITR1 ((uint16_t)0x0010)
+#define TIM_TS_ITR2 ((uint16_t)0x0020)
+#define TIM_TS_ITR3 ((uint16_t)0x0030)
+#define TIM_TS_TI1F_ED ((uint16_t)0x0040)
+#define TIM_TS_TI1FP1 ((uint16_t)0x0050)
+#define TIM_TS_TI2FP2 ((uint16_t)0x0060)
+#define TIM_TS_ETRF ((uint16_t)0x0070)
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_TIx_External_Clock_Source
+ * @{
+ */
+
+#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050)
+#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060)
+#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_External_Trigger_Polarity
+ * @{
+ */
+#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000)
+#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000)
+#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \
+ ((POLARITY) == TIM_ExtTRGPolarity_NonInverted))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Prescaler_Reload_Mode
+ * @{
+ */
+
+#define TIM_PSCReloadMode_Update ((uint16_t)0x0000)
+#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001)
+#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \
+ ((RELOAD) == TIM_PSCReloadMode_Immediate))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Forced_Action
+ * @{
+ */
+
+#define TIM_ForcedAction_Active ((uint16_t)0x0050)
+#define TIM_ForcedAction_InActive ((uint16_t)0x0040)
+#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \
+ ((ACTION) == TIM_ForcedAction_InActive))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode
+ * @{
+ */
+
+#define TIM_EncoderMode_TI1 ((uint16_t)0x0001)
+#define TIM_EncoderMode_TI2 ((uint16_t)0x0002)
+#define TIM_EncoderMode_TI12 ((uint16_t)0x0003)
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \
+ ((MODE) == TIM_EncoderMode_TI2) || \
+ ((MODE) == TIM_EncoderMode_TI12))
+/**
+ * @}
+ */
+
+
+/** @defgroup TIM_Event_Source
+ * @{
+ */
+
+#define TIM_EventSource_Update ((uint16_t)0x0001)
+#define TIM_EventSource_CC1 ((uint16_t)0x0002)
+#define TIM_EventSource_CC2 ((uint16_t)0x0004)
+#define TIM_EventSource_CC3 ((uint16_t)0x0008)
+#define TIM_EventSource_CC4 ((uint16_t)0x0010)
+#define TIM_EventSource_COM ((uint16_t)0x0020)
+#define TIM_EventSource_Trigger ((uint16_t)0x0040)
+#define TIM_EventSource_Break ((uint16_t)0x0080)
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0xFF00) == 0x0000) && ((SOURCE) != 0x0000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Update_Source
+ * @{
+ */
+
+#define TIM_UpdateSource_Global ((uint16_t)0x0000) /*!< Source of update is the counter overflow/underflow
+ or the setting of UG bit, or an update generation
+ through the slave mode controller. */
+#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /*!< Source of update is counter overflow/underflow. */
+#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \
+ ((SOURCE) == TIM_UpdateSource_Regular))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Preload_State
+ * @{
+ */
+
+#define TIM_OCPreload_Enable ((uint16_t)0x0008)
+#define TIM_OCPreload_Disable ((uint16_t)0x0000)
+#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \
+ ((STATE) == TIM_OCPreload_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Fast_State
+ * @{
+ */
+
+#define TIM_OCFast_Enable ((uint16_t)0x0004)
+#define TIM_OCFast_Disable ((uint16_t)0x0000)
+#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \
+ ((STATE) == TIM_OCFast_Disable))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Clear_State
+ * @{
+ */
+
+#define TIM_OCClear_Enable ((uint16_t)0x0080)
+#define TIM_OCClear_Disable ((uint16_t)0x0000)
+#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \
+ ((STATE) == TIM_OCClear_Disable))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Output_Source
+ * @{
+ */
+
+#define TIM_TRGOSource_Reset ((uint16_t)0x0000)
+#define TIM_TRGOSource_Enable ((uint16_t)0x0010)
+#define TIM_TRGOSource_Update ((uint16_t)0x0020)
+#define TIM_TRGOSource_OC1 ((uint16_t)0x0030)
+#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040)
+#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050)
+#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060)
+#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070)
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \
+ ((SOURCE) == TIM_TRGOSource_Enable) || \
+ ((SOURCE) == TIM_TRGOSource_Update) || \
+ ((SOURCE) == TIM_TRGOSource_OC1) || \
+ ((SOURCE) == TIM_TRGOSource_OC1Ref) || \
+ ((SOURCE) == TIM_TRGOSource_OC2Ref) || \
+ ((SOURCE) == TIM_TRGOSource_OC3Ref) || \
+ ((SOURCE) == TIM_TRGOSource_OC4Ref))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Slave_Mode
+ * @{
+ */
+
+#define TIM_SlaveMode_Reset ((uint16_t)0x0004)
+#define TIM_SlaveMode_Gated ((uint16_t)0x0005)
+#define TIM_SlaveMode_Trigger ((uint16_t)0x0006)
+#define TIM_SlaveMode_External1 ((uint16_t)0x0007)
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \
+ ((MODE) == TIM_SlaveMode_Gated) || \
+ ((MODE) == TIM_SlaveMode_Trigger) || \
+ ((MODE) == TIM_SlaveMode_External1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode
+ * @{
+ */
+
+#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080)
+#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000)
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \
+ ((STATE) == TIM_MasterSlaveMode_Disable))
+/**
+ * @}
+ */
+/** @defgroup TIM_Remap
+ * @{
+ */
+
+#define TIM2_TIM8_TRGO ((uint16_t)0x0000)
+#define TIM2_ETH_PTP ((uint16_t)0x0400)
+#define TIM2_USBFS_SOF ((uint16_t)0x0800)
+#define TIM2_USBHS_SOF ((uint16_t)0x0C00)
+
+#define TIM5_GPIO ((uint16_t)0x0000)
+#define TIM5_LSI ((uint16_t)0x0040)
+#define TIM5_LSE ((uint16_t)0x0080)
+#define TIM5_RTC ((uint16_t)0x00C0)
+
+#define TIM11_GPIO ((uint16_t)0x0000)
+#define TIM11_HSE ((uint16_t)0x0002)
+
+#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM2_TIM8_TRGO)||\
+ ((TIM_REMAP) == TIM2_ETH_PTP)||\
+ ((TIM_REMAP) == TIM2_USBFS_SOF)||\
+ ((TIM_REMAP) == TIM2_USBHS_SOF)||\
+ ((TIM_REMAP) == TIM5_GPIO)||\
+ ((TIM_REMAP) == TIM5_LSI)||\
+ ((TIM_REMAP) == TIM5_LSE)||\
+ ((TIM_REMAP) == TIM5_RTC)||\
+ ((TIM_REMAP) == TIM11_GPIO)||\
+ ((TIM_REMAP) == TIM11_HSE))
+
+/**
+ * @}
+ */
+/** @defgroup TIM_Flags
+ * @{
+ */
+
+#define TIM_FLAG_Update ((uint16_t)0x0001)
+#define TIM_FLAG_CC1 ((uint16_t)0x0002)
+#define TIM_FLAG_CC2 ((uint16_t)0x0004)
+#define TIM_FLAG_CC3 ((uint16_t)0x0008)
+#define TIM_FLAG_CC4 ((uint16_t)0x0010)
+#define TIM_FLAG_COM ((uint16_t)0x0020)
+#define TIM_FLAG_Trigger ((uint16_t)0x0040)
+#define TIM_FLAG_Break ((uint16_t)0x0080)
+#define TIM_FLAG_CC1OF ((uint16_t)0x0200)
+#define TIM_FLAG_CC2OF ((uint16_t)0x0400)
+#define TIM_FLAG_CC3OF ((uint16_t)0x0800)
+#define TIM_FLAG_CC4OF ((uint16_t)0x1000)
+#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \
+ ((FLAG) == TIM_FLAG_CC1) || \
+ ((FLAG) == TIM_FLAG_CC2) || \
+ ((FLAG) == TIM_FLAG_CC3) || \
+ ((FLAG) == TIM_FLAG_CC4) || \
+ ((FLAG) == TIM_FLAG_COM) || \
+ ((FLAG) == TIM_FLAG_Trigger) || \
+ ((FLAG) == TIM_FLAG_Break) || \
+ ((FLAG) == TIM_FLAG_CC1OF) || \
+ ((FLAG) == TIM_FLAG_CC2OF) || \
+ ((FLAG) == TIM_FLAG_CC3OF) || \
+ ((FLAG) == TIM_FLAG_CC4OF))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Filer_Value
+ * @{
+ */
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_External_Trigger_Filter
+ * @{
+ */
+
+#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Legacy
+ * @{
+ */
+
+#define TIM_DMABurstLength_1Byte TIM_DMABurstLength_1Transfer
+#define TIM_DMABurstLength_2Bytes TIM_DMABurstLength_2Transfers
+#define TIM_DMABurstLength_3Bytes TIM_DMABurstLength_3Transfers
+#define TIM_DMABurstLength_4Bytes TIM_DMABurstLength_4Transfers
+#define TIM_DMABurstLength_5Bytes TIM_DMABurstLength_5Transfers
+#define TIM_DMABurstLength_6Bytes TIM_DMABurstLength_6Transfers
+#define TIM_DMABurstLength_7Bytes TIM_DMABurstLength_7Transfers
+#define TIM_DMABurstLength_8Bytes TIM_DMABurstLength_8Transfers
+#define TIM_DMABurstLength_9Bytes TIM_DMABurstLength_9Transfers
+#define TIM_DMABurstLength_10Bytes TIM_DMABurstLength_10Transfers
+#define TIM_DMABurstLength_11Bytes TIM_DMABurstLength_11Transfers
+#define TIM_DMABurstLength_12Bytes TIM_DMABurstLength_12Transfers
+#define TIM_DMABurstLength_13Bytes TIM_DMABurstLength_13Transfers
+#define TIM_DMABurstLength_14Bytes TIM_DMABurstLength_14Transfers
+#define TIM_DMABurstLength_15Bytes TIM_DMABurstLength_15Transfers
+#define TIM_DMABurstLength_16Bytes TIM_DMABurstLength_16Transfers
+#define TIM_DMABurstLength_17Bytes TIM_DMABurstLength_17Transfers
+#define TIM_DMABurstLength_18Bytes TIM_DMABurstLength_18Transfers
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* TimeBase management ********************************************************/
+void TIM_DeInit(TIM_TypeDef* TIMx);
+void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct);
+void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct);
+void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode);
+void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode);
+void TIM_SetCounter(TIM_TypeDef* TIMx, uint32_t Counter);
+void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint32_t Autoreload);
+uint32_t TIM_GetCounter(TIM_TypeDef* TIMx);
+uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx);
+void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource);
+void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode);
+void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD);
+void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState);
+
+/* Output Compare management **************************************************/
+void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode);
+void TIM_SetCompare1(TIM_TypeDef* TIMx, uint32_t Compare1);
+void TIM_SetCompare2(TIM_TypeDef* TIMx, uint32_t Compare2);
+void TIM_SetCompare3(TIM_TypeDef* TIMx, uint32_t Compare3);
+void TIM_SetCompare4(TIM_TypeDef* TIMx, uint32_t Compare4);
+void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx);
+void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN);
+
+/* Input Capture management ***************************************************/
+void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct);
+uint32_t TIM_GetCapture1(TIM_TypeDef* TIMx);
+uint32_t TIM_GetCapture2(TIM_TypeDef* TIMx);
+uint32_t TIM_GetCapture3(TIM_TypeDef* TIMx);
+uint32_t TIM_GetCapture4(TIM_TypeDef* TIMx);
+void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+
+/* Advanced-control timers (TIM1 and TIM8) specific features ******************/
+void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct);
+void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct);
+void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState);
+
+/* Interrupts, DMA and flags management ***************************************/
+void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState);
+void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource);
+FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG);
+void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG);
+ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT);
+void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT);
+void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength);
+void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState);
+void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState);
+
+/* Clocks management **********************************************************/
+void TIM_InternalClockConfig(TIM_TypeDef* TIMx);
+void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
+void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource,
+ uint16_t TIM_ICPolarity, uint16_t ICFilter);
+void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter);
+void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler,
+ uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter);
+
+/* Synchronization management *************************************************/
+void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
+void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource);
+void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode);
+void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode);
+void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+ uint16_t ExtTRGFilter);
+
+/* Specific interface management **********************************************/
+void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode,
+ uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity);
+void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState);
+
+/* Specific remapping management **********************************************/
+void TIM_RemapConfig(TIM_TypeDef* TIMx, uint16_t TIM_Remap);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_TIM_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff -r 4985455162fc -r 1c6281289d67 stm32f4xx_usart.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32f4xx_usart.c Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,1464 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_usart.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 30-September-2011
+ * @brief This file provides firmware functions to manage the following
+ * functionalities of the Universal synchronous asynchronous receiver
+ * transmitter (USART):
+ * - Initialization and Configuration
+ * - Data transfers
+ * - Multi-Processor Communication
+ * - LIN mode
+ * - Half-duplex mode
+ * - Smartcard mode
+ * - IrDA mode
+ * - DMA transfers management
+ * - Interrupts and flags management
+ *
+ * @verbatim
+ *
+ * ===================================================================
+ * How to use this driver
+ * ===================================================================
+ * 1. Enable peripheral clock using the follwoing functions
+ * RCC_APB2PeriphClockCmd(RCC_APB2Periph_USARTx, ENABLE) for USART1 and USART6
+ * RCC_APB1PeriphClockCmd(RCC_APB1Periph_USARTx, ENABLE) for USART2, USART3, UART4 or UART5.
+ *
+ * 2. According to the USART mode, enable the GPIO clocks using
+ * RCC_AHB1PeriphClockCmd() function. (The I/O can be TX, RX, CTS,
+ * or/and SCLK).
+ *
+ * 3. Peripheral's alternate function:
+ * - Connect the pin to the desired peripherals' Alternate
+ * Function (AF) using GPIO_PinAFConfig() function
+ * - Configure the desired pin in alternate function by:
+ * GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF
+ * - Select the type, pull-up/pull-down and output speed via
+ * GPIO_PuPd, GPIO_OType and GPIO_Speed members
+ * - Call GPIO_Init() function
+ *
+ * 4. Program the Baud Rate, Word Length , Stop Bit, Parity, Hardware
+ * flow control and Mode(Receiver/Transmitter) using the USART_Init()
+ * function.
+ *
+ * 5. For synchronous mode, enable the clock and program the polarity,
+ * phase and last bit using the USART_ClockInit() function.
+ *
+ * 5. Enable the NVIC and the corresponding interrupt using the function
+ * USART_ITConfig() if you need to use interrupt mode.
+ *
+ * 6. When using the DMA mode
+ * - Configure the DMA using DMA_Init() function
+ * - Active the needed channel Request using USART_DMACmd() function
+ *
+ * 7. Enable the USART using the USART_Cmd() function.
+ *
+ * 8. Enable the DMA using the DMA_Cmd() function, when using DMA mode.
+ *
+ * Refer to Multi-Processor, LIN, half-duplex, Smartcard, IrDA sub-sections
+ * for more details
+ *
+ * In order to reach higher communication baudrates, it is possible to
+ * enable the oversampling by 8 mode using the function USART_OverSampling8Cmd().
+ * This function should be called after enabling the USART clock (RCC_APBxPeriphClockCmd())
+ * and before calling the function USART_Init().
+ *
+ * @endverbatim
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_usart.h"
+#include "stm32f4xx_rcc.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @defgroup USART
+ * @brief USART driver modules
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/*!< USART CR1 register clear Mask ((~(uint16_t)0xE9F3)) */
+#define CR1_CLEAR_MASK ((uint16_t)(USART_CR1_M | USART_CR1_PCE | \
+ USART_CR1_PS | USART_CR1_TE | \
+ USART_CR1_RE))
+
+/*!< USART CR2 register clock bits clear Mask ((~(uint16_t)0xF0FF)) */
+#define CR2_CLOCK_CLEAR_MASK ((uint16_t)(USART_CR2_CLKEN | USART_CR2_CPOL | \
+ USART_CR2_CPHA | USART_CR2_LBCL))
+
+/*!< USART CR3 register clear Mask ((~(uint16_t)0xFCFF)) */
+#define CR3_CLEAR_MASK ((uint16_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+
+/*!< USART Interrupts mask */
+#define IT_MASK ((uint16_t)0x001F)
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup USART_Private_Functions
+ * @{
+ */
+
+/** @defgroup USART_Group1 Initialization and Configuration functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+ Initialization and Configuration functions
+ ===============================================================================
+
+ This subsection provides a set of functions allowing to initialize the USART
+ in asynchronous and in synchronous modes.
+ - For the asynchronous mode only these parameters can be configured:
+ - Baud Rate
+ - Word Length
+ - Stop Bit
+ - Parity: If the parity is enabled, then the MSB bit of the data written
+ in the data register is transmitted but is changed by the parity bit.
+ Depending on the frame length defined by the M bit (8-bits or 9-bits),
+ the possible USART frame formats are as listed in the following table:
+ +-------------------------------------------------------------+
+ | M bit | PCE bit | USART frame |
+ |---------------------|---------------------------------------|
+ | 0 | 0 | | SB | 8 bit data | STB | |
+ |---------|-----------|---------------------------------------|
+ | 0 | 1 | | SB | 7 bit data | PB | STB | |
+ |---------|-----------|---------------------------------------|
+ | 1 | 0 | | SB | 9 bit data | STB | |
+ |---------|-----------|---------------------------------------|
+ | 1 | 1 | | SB | 8 bit data | PB | STB | |
+ +-------------------------------------------------------------+
+ - Hardware flow control
+ - Receiver/transmitter modes
+
+ The USART_Init() function follows the USART asynchronous configuration procedure
+ (details for the procedure are available in reference manual (RM0090)).
+
+ - For the synchronous mode in addition to the asynchronous mode parameters these
+ parameters should be also configured:
+ - USART Clock Enabled
+ - USART polarity
+ - USART phase
+ - USART LastBit
+
+ These parameters can be configured using the USART_ClockInit() function.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Deinitializes the USARTx peripheral registers to their default reset values.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+void USART_DeInit(USART_TypeDef* USARTx)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ if (USARTx == USART1)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE);
+ }
+ else if (USARTx == USART2)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE);
+ }
+ else if (USARTx == USART3)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE);
+ }
+ else if (USARTx == UART4)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE);
+ }
+ else if (USARTx == UART5)
+ {
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE);
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE);
+ }
+ else
+ {
+ if (USARTx == USART6)
+ {
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART6, ENABLE);
+ RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART6, DISABLE);
+ }
+ }
+}
+
+/**
+ * @brief Initializes the USARTx peripheral according to the specified
+ * parameters in the USART_InitStruct .
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param USART_InitStruct: pointer to a USART_InitTypeDef structure that contains
+ * the configuration information for the specified USART peripheral.
+ * @retval None
+ */
+void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct)
+{
+ uint32_t tmpreg = 0x00, apbclock = 0x00;
+ uint32_t integerdivider = 0x00;
+ uint32_t fractionaldivider = 0x00;
+ RCC_ClocksTypeDef RCC_ClocksStatus;
+
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate));
+ assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength));
+ assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits));
+ assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity));
+ assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode));
+ assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl));
+
+ /* The hardware flow control is available only for USART1, USART2, USART3 and USART6 */
+ if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None)
+ {
+ assert_param(IS_USART_1236_PERIPH(USARTx));
+ }
+
+/*---------------------------- USART CR2 Configuration -----------------------*/
+ tmpreg = USARTx->CR2;
+
+ /* Clear STOP[13:12] bits */
+ tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP);
+
+ /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit :
+ Set STOP[13:12] bits according to USART_StopBits value */
+ tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits;
+
+ /* Write to USART CR2 */
+ USARTx->CR2 = (uint16_t)tmpreg;
+
+/*---------------------------- USART CR1 Configuration -----------------------*/
+ tmpreg = USARTx->CR1;
+
+ /* Clear M, PCE, PS, TE and RE bits */
+ tmpreg &= (uint32_t)~((uint32_t)CR1_CLEAR_MASK);
+
+ /* Configure the USART Word Length, Parity and mode:
+ Set the M bits according to USART_WordLength value
+ Set PCE and PS bits according to USART_Parity value
+ Set TE and RE bits according to USART_Mode value */
+ tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity |
+ USART_InitStruct->USART_Mode;
+
+ /* Write to USART CR1 */
+ USARTx->CR1 = (uint16_t)tmpreg;
+
+/*---------------------------- USART CR3 Configuration -----------------------*/
+ tmpreg = USARTx->CR3;
+
+ /* Clear CTSE and RTSE bits */
+ tmpreg &= (uint32_t)~((uint32_t)CR3_CLEAR_MASK);
+
+ /* Configure the USART HFC :
+ Set CTSE and RTSE bits according to USART_HardwareFlowControl value */
+ tmpreg |= USART_InitStruct->USART_HardwareFlowControl;
+
+ /* Write to USART CR3 */
+ USARTx->CR3 = (uint16_t)tmpreg;
+
+/*---------------------------- USART BRR Configuration -----------------------*/
+ /* Configure the USART Baud Rate */
+ RCC_GetClocksFreq(&RCC_ClocksStatus);
+
+ if ((USARTx == USART1) || (USARTx == USART6))
+ {
+ apbclock = RCC_ClocksStatus.PCLK2_Frequency;
+ }
+ else
+ {
+ apbclock = RCC_ClocksStatus.PCLK1_Frequency;
+ }
+
+ /* Determine the integer part */
+ if ((USARTx->CR1 & USART_CR1_OVER8) != 0)
+ {
+ /* Integer part computing in case Oversampling mode is 8 Samples */
+ integerdivider = ((25 * apbclock) / (2 * (USART_InitStruct->USART_BaudRate)));
+ }
+ else /* if ((USARTx->CR1 & USART_CR1_OVER8) == 0) */
+ {
+ /* Integer part computing in case Oversampling mode is 16 Samples */
+ integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate)));
+ }
+ tmpreg = (integerdivider / 100) << 4;
+
+ /* Determine the fractional part */
+ fractionaldivider = integerdivider - (100 * (tmpreg >> 4));
+
+ /* Implement the fractional part in the register */
+ if ((USARTx->CR1 & USART_CR1_OVER8) != 0)
+ {
+ tmpreg |= ((((fractionaldivider * 8) + 50) / 100)) & ((uint8_t)0x07);
+ }
+ else /* if ((USARTx->CR1 & USART_CR1_OVER8) == 0) */
+ {
+ tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F);
+ }
+
+ /* Write to USART BRR register */
+ USARTx->BRR = (uint16_t)tmpreg;
+}
+
+/**
+ * @brief Fills each USART_InitStruct member with its default value.
+ * @param USART_InitStruct: pointer to a USART_InitTypeDef structure which will
+ * be initialized.
+ * @retval None
+ */
+void USART_StructInit(USART_InitTypeDef* USART_InitStruct)
+{
+ /* USART_InitStruct members default value */
+ USART_InitStruct->USART_BaudRate = 9600;
+ USART_InitStruct->USART_WordLength = USART_WordLength_8b;
+ USART_InitStruct->USART_StopBits = USART_StopBits_1;
+ USART_InitStruct->USART_Parity = USART_Parity_No ;
+ USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+ USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+}
+
+/**
+ * @brief Initializes the USARTx peripheral Clock according to the
+ * specified parameters in the USART_ClockInitStruct .
+ * @param USARTx: where x can be 1, 2, 3 or 6 to select the USART peripheral.
+ * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef structure that
+ * contains the configuration information for the specified USART peripheral.
+ * @note The Smart Card and Synchronous modes are not available for UART4 and UART5.
+ * @retval None
+ */
+void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct)
+{
+ uint32_t tmpreg = 0x00;
+ /* Check the parameters */
+ assert_param(IS_USART_1236_PERIPH(USARTx));
+ assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock));
+ assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL));
+ assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA));
+ assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit));
+
+/*---------------------------- USART CR2 Configuration -----------------------*/
+ tmpreg = USARTx->CR2;
+ /* Clear CLKEN, CPOL, CPHA and LBCL bits */
+ tmpreg &= (uint32_t)~((uint32_t)CR2_CLOCK_CLEAR_MASK);
+ /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/
+ /* Set CLKEN bit according to USART_Clock value */
+ /* Set CPOL bit according to USART_CPOL value */
+ /* Set CPHA bit according to USART_CPHA value */
+ /* Set LBCL bit according to USART_LastBit value */
+ tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL |
+ USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit;
+ /* Write to USART CR2 */
+ USARTx->CR2 = (uint16_t)tmpreg;
+}
+
+/**
+ * @brief Fills each USART_ClockInitStruct member with its default value.
+ * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef structure
+ * which will be initialized.
+ * @retval None
+ */
+void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct)
+{
+ /* USART_ClockInitStruct members default value */
+ USART_ClockInitStruct->USART_Clock = USART_Clock_Disable;
+ USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low;
+ USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge;
+ USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable;
+}
+
+/**
+ * @brief Enables or disables the specified USART peripheral.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param NewState: new state of the USARTx peripheral.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the selected USART by setting the UE bit in the CR1 register */
+ USARTx->CR1 |= USART_CR1_UE;
+ }
+ else
+ {
+ /* Disable the selected USART by clearing the UE bit in the CR1 register */
+ USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_UE);
+ }
+}
+
+/**
+ * @brief Sets the system clock prescaler.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param USART_Prescaler: specifies the prescaler clock.
+ * @note The function is used for IrDA mode with UART4 and UART5.
+ * @retval None
+ */
+void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ /* Clear the USART prescaler */
+ USARTx->GTPR &= USART_GTPR_GT;
+ /* Set the USART prescaler */
+ USARTx->GTPR |= USART_Prescaler;
+}
+
+/**
+ * @brief Enables or disables the USART's 8x oversampling mode.
+ * @note This function has to be called before calling USART_Init() function
+ * in order to have correct baudrate Divider value.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param NewState: new state of the USART 8x oversampling mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */
+ USARTx->CR1 |= USART_CR1_OVER8;
+ }
+ else
+ {
+ /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */
+ USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_OVER8);
+ }
+}
+
+/**
+ * @brief Enables or disables the USART's one bit sampling method.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param NewState: new state of the USART one bit sampling method.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */
+ USARTx->CR3 |= USART_CR3_ONEBIT;
+ }
+ else
+ {
+ /* Disable the one bit method by clearing the ONEBITE bit in the CR3 register */
+ USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT);
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Group2 Data transfers functions
+ * @brief Data transfers functions
+ *
+@verbatim
+ ===============================================================================
+ Data transfers functions
+ ===============================================================================
+
+ This subsection provides a set of functions allowing to manage the USART data
+ transfers.
+
+ During an USART reception, data shifts in least significant bit first through
+ the RX pin. In this mode, the USART_DR register consists of a buffer (RDR)
+ between the internal bus and the received shift register.
+
+ When a transmission is taking place, a write instruction to the USART_DR register
+ stores the data in the TDR register and which is copied in the shift register
+ at the end of the current transmission.
+
+ The read access of the USART_DR register can be done using the USART_ReceiveData()
+ function and returns the RDR buffered value. Whereas a write access to the USART_DR
+ can be done using USART_SendData() function and stores the written data into
+ TDR buffer.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Transmits single data through the USARTx peripheral.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param Data: the data to transmit.
+ * @retval None
+ */
+void USART_SendData(USART_TypeDef* USARTx, uint16_t Data)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_DATA(Data));
+
+ /* Transmit Data */
+ USARTx->DR = (Data & (uint16_t)0x01FF);
+}
+
+/**
+ * @brief Returns the most recent received data by the USARTx peripheral.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @retval The received data.
+ */
+uint16_t USART_ReceiveData(USART_TypeDef* USARTx)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ /* Receive Data */
+ return (uint16_t)(USARTx->DR & (uint16_t)0x01FF);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Group3 MultiProcessor Communication functions
+ * @brief Multi-Processor Communication functions
+ *
+@verbatim
+ ===============================================================================
+ Multi-Processor Communication functions
+ ===============================================================================
+
+ This subsection provides a set of functions allowing to manage the USART
+ multiprocessor communication.
+
+ For instance one of the USARTs can be the master, its TX output is connected to
+ the RX input of the other USART. The others are slaves, their respective TX outputs
+ are logically ANDed together and connected to the RX input of the master.
+
+ USART multiprocessor communication is possible through the following procedure:
+ 1. Program the Baud rate, Word length = 9 bits, Stop bits, Parity, Mode transmitter
+ or Mode receiver and hardware flow control values using the USART_Init()
+ function.
+ 2. Configures the USART address using the USART_SetAddress() function.
+ 3. Configures the wake up method (USART_WakeUp_IdleLine or USART_WakeUp_AddressMark)
+ using USART_WakeUpConfig() function only for the slaves.
+ 4. Enable the USART using the USART_Cmd() function.
+ 5. Enter the USART slaves in mute mode using USART_ReceiverWakeUpCmd() function.
+
+ The USART Slave exit from mute mode when receive the wake up condition.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets the address of the USART node.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param USART_Address: Indicates the address of the USART node.
+ * @retval None
+ */
+void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_ADDRESS(USART_Address));
+
+ /* Clear the USART address */
+ USARTx->CR2 &= (uint16_t)~((uint16_t)USART_CR2_ADD);
+ /* Set the USART address node */
+ USARTx->CR2 |= USART_Address;
+}
+
+/**
+ * @brief Determines if the USART is in mute mode or not.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param NewState: new state of the USART mute mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the USART mute mode by setting the RWU bit in the CR1 register */
+ USARTx->CR1 |= USART_CR1_RWU;
+ }
+ else
+ {
+ /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */
+ USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_RWU);
+ }
+}
+/**
+ * @brief Selects the USART WakeUp method.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param USART_WakeUp: specifies the USART wakeup method.
+ * This parameter can be one of the following values:
+ * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection
+ * @arg USART_WakeUp_AddressMark: WakeUp by an address mark
+ * @retval None
+ */
+void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_WAKEUP(USART_WakeUp));
+
+ USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_WAKE);
+ USARTx->CR1 |= USART_WakeUp;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Group4 LIN mode functions
+ * @brief LIN mode functions
+ *
+@verbatim
+ ===============================================================================
+ LIN mode functions
+ ===============================================================================
+
+ This subsection provides a set of functions allowing to manage the USART LIN
+ Mode communication.
+
+ In LIN mode, 8-bit data format with 1 stop bit is required in accordance with
+ the LIN standard.
+
+ Only this LIN Feature is supported by the USART IP:
+ - LIN Master Synchronous Break send capability and LIN slave break detection
+ capability : 13-bit break generation and 10/11 bit break detection
+
+
+ USART LIN Master transmitter communication is possible through the following procedure:
+ 1. Program the Baud rate, Word length = 8bits, Stop bits = 1bit, Parity,
+ Mode transmitter or Mode receiver and hardware flow control values using
+ the USART_Init() function.
+ 2. Enable the USART using the USART_Cmd() function.
+ 3. Enable the LIN mode using the USART_LINCmd() function.
+ 4. Send the break character using USART_SendBreak() function.
+
+ USART LIN Master receiver communication is possible through the following procedure:
+ 1. Program the Baud rate, Word length = 8bits, Stop bits = 1bit, Parity,
+ Mode transmitter or Mode receiver and hardware flow control values using
+ the USART_Init() function.
+ 2. Enable the USART using the USART_Cmd() function.
+ 3. Configures the break detection length using the USART_LINBreakDetectLengthConfig()
+ function.
+ 4. Enable the LIN mode using the USART_LINCmd() function.
+
+
+@note In LIN mode, the following bits must be kept cleared:
+ - CLKEN in the USART_CR2 register,
+ - STOP[1:0], SCEN, HDSEL and IREN in the USART_CR3 register.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets the USART LIN Break detection length.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param USART_LINBreakDetectLength: specifies the LIN break detection length.
+ * This parameter can be one of the following values:
+ * @arg USART_LINBreakDetectLength_10b: 10-bit break detection
+ * @arg USART_LINBreakDetectLength_11b: 11-bit break detection
+ * @retval None
+ */
+void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength));
+
+ USARTx->CR2 &= (uint16_t)~((uint16_t)USART_CR2_LBDL);
+ USARTx->CR2 |= USART_LINBreakDetectLength;
+}
+
+/**
+ * @brief Enables or disables the USART's LIN mode.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param NewState: new state of the USART LIN mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
+ USARTx->CR2 |= USART_CR2_LINEN;
+ }
+ else
+ {
+ /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */
+ USARTx->CR2 &= (uint16_t)~((uint16_t)USART_CR2_LINEN);
+ }
+}
+
+/**
+ * @brief Transmits break characters.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+void USART_SendBreak(USART_TypeDef* USARTx)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+ /* Send break characters */
+ USARTx->CR1 |= USART_CR1_SBK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Group5 Halfduplex mode function
+ * @brief Half-duplex mode function
+ *
+@verbatim
+ ===============================================================================
+ Half-duplex mode function
+ ===============================================================================
+
+ This subsection provides a set of functions allowing to manage the USART
+ Half-duplex communication.
+
+ The USART can be configured to follow a single-wire half-duplex protocol where
+ the TX and RX lines are internally connected.
+
+ USART Half duplex communication is possible through the following procedure:
+ 1. Program the Baud rate, Word length, Stop bits, Parity, Mode transmitter
+ or Mode receiver and hardware flow control values using the USART_Init()
+ function.
+ 2. Configures the USART address using the USART_SetAddress() function.
+ 3. Enable the USART using the USART_Cmd() function.
+ 4. Enable the half duplex mode using USART_HalfDuplexCmd() function.
+
+
+@note The RX pin is no longer used
+@note In Half-duplex mode the following bits must be kept cleared:
+ - LINEN and CLKEN bits in the USART_CR2 register.
+ - SCEN and IREN bits in the USART_CR3 register.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables or disables the USART's Half Duplex communication.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param NewState: new state of the USART Communication.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
+ USARTx->CR3 |= USART_CR3_HDSEL;
+ }
+ else
+ {
+ /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */
+ USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_HDSEL);
+ }
+}
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USART_Group6 Smartcard mode functions
+ * @brief Smartcard mode functions
+ *
+@verbatim
+ ===============================================================================
+ Smartcard mode functions
+ ===============================================================================
+
+ This subsection provides a set of functions allowing to manage the USART
+ Smartcard communication.
+
+ The Smartcard interface is designed to support asynchronous protocol Smartcards as
+ defined in the ISO 7816-3 standard.
+
+ The USART can provide a clock to the smartcard through the SCLK output.
+ In smartcard mode, SCLK is not associated to the communication but is simply derived
+ from the internal peripheral input clock through a 5-bit prescaler.
+
+ Smartcard communication is possible through the following procedure:
+ 1. Configures the Smartcard Prescaler using the USART_SetPrescaler() function.
+ 2. Configures the Smartcard Guard Time using the USART_SetGuardTime() function.
+ 3. Program the USART clock using the USART_ClockInit() function as following:
+ - USART Clock enabled
+ - USART CPOL Low
+ - USART CPHA on first edge
+ - USART Last Bit Clock Enabled
+ 4. Program the Smartcard interface using the USART_Init() function as following:
+ - Word Length = 9 Bits
+ - 1.5 Stop Bit
+ - Even parity
+ - BaudRate = 12096 baud
+ - Hardware flow control disabled (RTS and CTS signals)
+ - Tx and Rx enabled
+ 5. Optionally you can enable the parity error interrupt using the USART_ITConfig()
+ function
+ 6. Enable the USART using the USART_Cmd() function.
+ 7. Enable the Smartcard NACK using the USART_SmartCardNACKCmd() function.
+ 8. Enable the Smartcard interface using the USART_SmartCardCmd() function.
+
+ Please refer to the ISO 7816-3 specification for more details.
+
+
+@note It is also possible to choose 0.5 stop bit for receiving but it is recommended
+ to use 1.5 stop bits for both transmitting and receiving to avoid switching
+ between the two configurations.
+@note In smartcard mode, the following bits must be kept cleared:
+ - LINEN bit in the USART_CR2 register.
+ - HDSEL and IREN bits in the USART_CR3 register.
+@note Smartcard mode is available on USART peripherals only (not available on UART4
+ and UART5 peripherals).
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Sets the specified USART guard time.
+ * @param USARTx: where x can be 1, 2, 3 or 6 to select the USART or
+ * UART peripheral.
+ * @param USART_GuardTime: specifies the guard time.
+ * @retval None
+ */
+void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_1236_PERIPH(USARTx));
+
+ /* Clear the USART Guard time */
+ USARTx->GTPR &= USART_GTPR_PSC;
+ /* Set the USART guard time */
+ USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08);
+}
+
+/**
+ * @brief Enables or disables the USART's Smart Card mode.
+ * @param USARTx: where x can be 1, 2, 3 or 6 to select the USART or
+ * UART peripheral.
+ * @param NewState: new state of the Smart Card mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_1236_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the SC mode by setting the SCEN bit in the CR3 register */
+ USARTx->CR3 |= USART_CR3_SCEN;
+ }
+ else
+ {
+ /* Disable the SC mode by clearing the SCEN bit in the CR3 register */
+ USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_SCEN);
+ }
+}
+
+/**
+ * @brief Enables or disables NACK transmission.
+ * @param USARTx: where x can be 1, 2, 3 or 6 to select the USART or
+ * UART peripheral.
+ * @param NewState: new state of the NACK transmission.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_1236_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+ if (NewState != DISABLE)
+ {
+ /* Enable the NACK transmission by setting the NACK bit in the CR3 register */
+ USARTx->CR3 |= USART_CR3_NACK;
+ }
+ else
+ {
+ /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */
+ USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_NACK);
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Group7 IrDA mode functions
+ * @brief IrDA mode functions
+ *
+@verbatim
+ ===============================================================================
+ IrDA mode functions
+ ===============================================================================
+
+ This subsection provides a set of functions allowing to manage the USART
+ IrDA communication.
+
+ IrDA is a half duplex communication protocol. If the Transmitter is busy, any data
+ on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver
+ is busy, data on the TX from the USART to IrDA will not be encoded by IrDA.
+ While receiving data, transmission should be avoided as the data to be transmitted
+ could be corrupted.
+
+ IrDA communication is possible through the following procedure:
+ 1. Program the Baud rate, Word length = 8 bits, Stop bits, Parity, Transmitter/Receiver
+ modes and hardware flow control values using the USART_Init() function.
+ 2. Enable the USART using the USART_Cmd() function.
+ 3. Configures the IrDA pulse width by configuring the prescaler using
+ the USART_SetPrescaler() function.
+ 4. Configures the IrDA USART_IrDAMode_LowPower or USART_IrDAMode_Normal mode
+ using the USART_IrDAConfig() function.
+ 5. Enable the IrDA using the USART_IrDACmd() function.
+
+@note A pulse of width less than two and greater than one PSC period(s) may or may
+ not be rejected.
+@note The receiver set up time should be managed by software. The IrDA physical layer
+ specification specifies a minimum of 10 ms delay between transmission and
+ reception (IrDA is a half duplex protocol).
+@note In IrDA mode, the following bits must be kept cleared:
+ - LINEN, STOP and CLKEN bits in the USART_CR2 register.
+ - SCEN and HDSEL bits in the USART_CR3 register.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Configures the USART's IrDA interface.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param USART_IrDAMode: specifies the IrDA mode.
+ * This parameter can be one of the following values:
+ * @arg USART_IrDAMode_LowPower
+ * @arg USART_IrDAMode_Normal
+ * @retval None
+ */
+void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_IRDA_MODE(USART_IrDAMode));
+
+ USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_IRLP);
+ USARTx->CR3 |= USART_IrDAMode;
+}
+
+/**
+ * @brief Enables or disables the USART's IrDA interface.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param NewState: new state of the IrDA mode.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the IrDA mode by setting the IREN bit in the CR3 register */
+ USARTx->CR3 |= USART_CR3_IREN;
+ }
+ else
+ {
+ /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */
+ USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_IREN);
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Group8 DMA transfers management functions
+ * @brief DMA transfers management functions
+ *
+@verbatim
+ ===============================================================================
+ DMA transfers management functions
+ ===============================================================================
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables or disables the USART's DMA interface.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param USART_DMAReq: specifies the DMA request.
+ * This parameter can be any combination of the following values:
+ * @arg USART_DMAReq_Tx: USART DMA transmit request
+ * @arg USART_DMAReq_Rx: USART DMA receive request
+ * @param NewState: new state of the DMA Request sources.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_DMAREQ(USART_DMAReq));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ if (NewState != DISABLE)
+ {
+ /* Enable the DMA transfer for selected requests by setting the DMAT and/or
+ DMAR bits in the USART CR3 register */
+ USARTx->CR3 |= USART_DMAReq;
+ }
+ else
+ {
+ /* Disable the DMA transfer for selected requests by clearing the DMAT and/or
+ DMAR bits in the USART CR3 register */
+ USARTx->CR3 &= (uint16_t)~USART_DMAReq;
+ }
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Group9 Interrupts and flags management functions
+ * @brief Interrupts and flags management functions
+ *
+@verbatim
+ ===============================================================================
+ Interrupts and flags management functions
+ ===============================================================================
+
+ This subsection provides a set of functions allowing to configure the USART
+ Interrupts sources, DMA channels requests and check or clear the flags or
+ pending bits status.
+ The user should identify which mode will be used in his application to manage
+ the communication: Polling mode, Interrupt mode or DMA mode.
+
+ Polling Mode
+ =============
+ In Polling Mode, the SPI communication can be managed by 10 flags:
+ 1. USART_FLAG_TXE : to indicate the status of the transmit buffer register
+ 2. USART_FLAG_RXNE : to indicate the status of the receive buffer register
+ 3. USART_FLAG_TC : to indicate the status of the transmit operation
+ 4. USART_FLAG_IDLE : to indicate the status of the Idle Line
+ 5. USART_FLAG_CTS : to indicate the status of the nCTS input
+ 6. USART_FLAG_LBD : to indicate the status of the LIN break detection
+ 7. USART_FLAG_NE : to indicate if a noise error occur
+ 8. USART_FLAG_FE : to indicate if a frame error occur
+ 9. USART_FLAG_PE : to indicate if a parity error occur
+ 10. USART_FLAG_ORE : to indicate if an Overrun error occur
+
+ In this Mode it is advised to use the following functions:
+ - FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG);
+ - void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG);
+
+ Interrupt Mode
+ ===============
+ In Interrupt Mode, the USART communication can be managed by 8 interrupt sources
+ and 10 pending bits:
+
+ Pending Bits:
+ -------------
+ 1. USART_IT_TXE : to indicate the status of the transmit buffer register
+ 2. USART_IT_RXNE : to indicate the status of the receive buffer register
+ 3. USART_IT_TC : to indicate the status of the transmit operation
+ 4. USART_IT_IDLE : to indicate the status of the Idle Line
+ 5. USART_IT_CTS : to indicate the status of the nCTS input
+ 6. USART_IT_LBD : to indicate the status of the LIN break detection
+ 7. USART_IT_NE : to indicate if a noise error occur
+ 8. USART_IT_FE : to indicate if a frame error occur
+ 9. USART_IT_PE : to indicate if a parity error occur
+ 10. USART_IT_ORE : to indicate if an Overrun error occur
+
+ Interrupt Source:
+ -----------------
+ 1. USART_IT_TXE : specifies the interrupt source for the Tx buffer empty
+ interrupt.
+ 2. USART_IT_RXNE : specifies the interrupt source for the Rx buffer not
+ empty interrupt.
+ 3. USART_IT_TC : specifies the interrupt source for the Transmit complete
+ interrupt.
+ 4. USART_IT_IDLE : specifies the interrupt source for the Idle Line interrupt.
+ 5. USART_IT_CTS : specifies the interrupt source for the CTS interrupt.
+ 6. USART_IT_LBD : specifies the interrupt source for the LIN break detection
+ interrupt.
+ 7. USART_IT_PE : specifies the interrupt source for the parity error interrupt.
+ 8. USART_IT_ERR : specifies the interrupt source for the errors interrupt.
+
+@note Some parameters are coded in order to use them as interrupt source or as pending bits.
+
+ In this Mode it is advised to use the following functions:
+ - void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState);
+ - ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT);
+ - void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT);
+
+ DMA Mode
+ ========
+ In DMA Mode, the USART communication can be managed by 2 DMA Channel requests:
+ 1. USART_DMAReq_Tx: specifies the Tx buffer DMA transfer request
+ 2. USART_DMAReq_Rx: specifies the Rx buffer DMA transfer request
+
+ In this Mode it is advised to use the following function:
+ - void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState);
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables or disables the specified USART interrupts.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_CTS: CTS change interrupt
+ * @arg USART_IT_LBD: LIN Break detection interrupt
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @param NewState: new state of the specified USARTx interrupts.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState)
+{
+ uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00;
+ uint32_t usartxbase = 0x00;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_CONFIG_IT(USART_IT));
+ assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+ /* The CTS interrupt is not available for UART4 and UART5 */
+ if (USART_IT == USART_IT_CTS)
+ {
+ assert_param(IS_USART_1236_PERIPH(USARTx));
+ }
+
+ usartxbase = (uint32_t)USARTx;
+
+ /* Get the USART register index */
+ usartreg = (((uint8_t)USART_IT) >> 0x05);
+
+ /* Get the interrupt position */
+ itpos = USART_IT & IT_MASK;
+ itmask = (((uint32_t)0x01) << itpos);
+
+ if (usartreg == 0x01) /* The IT is in CR1 register */
+ {
+ usartxbase += 0x0C;
+ }
+ else if (usartreg == 0x02) /* The IT is in CR2 register */
+ {
+ usartxbase += 0x10;
+ }
+ else /* The IT is in CR3 register */
+ {
+ usartxbase += 0x14;
+ }
+ if (NewState != DISABLE)
+ {
+ *(__IO uint32_t*)usartxbase |= itmask;
+ }
+ else
+ {
+ *(__IO uint32_t*)usartxbase &= ~itmask;
+ }
+}
+
+/**
+ * @brief Checks whether the specified USART flag is set or not.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param USART_FLAG: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
+ * @arg USART_FLAG_LBD: LIN Break detection flag
+ * @arg USART_FLAG_TXE: Transmit data register empty flag
+ * @arg USART_FLAG_TC: Transmission Complete flag
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag
+ * @arg USART_FLAG_IDLE: Idle Line detection flag
+ * @arg USART_FLAG_ORE: OverRun Error flag
+ * @arg USART_FLAG_NE: Noise Error flag
+ * @arg USART_FLAG_FE: Framing Error flag
+ * @arg USART_FLAG_PE: Parity Error flag
+ * @retval The new state of USART_FLAG (SET or RESET).
+ */
+FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG)
+{
+ FlagStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_FLAG(USART_FLAG));
+
+ /* The CTS flag is not available for UART4 and UART5 */
+ if (USART_FLAG == USART_FLAG_CTS)
+ {
+ assert_param(IS_USART_1236_PERIPH(USARTx));
+ }
+
+ if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET)
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the USARTx's pending flags.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param USART_FLAG: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
+ * @arg USART_FLAG_LBD: LIN Break detection flag.
+ * @arg USART_FLAG_TC: Transmission Complete flag.
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register (USART_GetFlagStatus())
+ * followed by a read operation to USART_DR register (USART_ReceiveData()).
+ * @note RXNE flag can be also cleared by a read to the USART_DR register
+ * (USART_ReceiveData()).
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register (USART_GetFlagStatus()) followed by a write operation
+ * to USART_DR register (USART_SendData()).
+ * @note TXE flag is cleared only by a write to the USART_DR register
+ * (USART_SendData()).
+ *
+ * @retval None
+ */
+void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG)
+{
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_CLEAR_FLAG(USART_FLAG));
+
+ /* The CTS flag is not available for UART4 and UART5 */
+ if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS)
+ {
+ assert_param(IS_USART_1236_PERIPH(USARTx));
+ }
+
+ USARTx->SR = (uint16_t)~USART_FLAG;
+}
+
+/**
+ * @brief Checks whether the specified USART interrupt has occurred or not.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param USART_IT: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg USART_IT_LBD: LIN Break detection interrupt
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ORE_RX : OverRun Error interrupt if the RXNEIE bit is set
+ * @arg USART_IT_ORE_ER : OverRun Error interrupt if the EIE bit is set
+ * @arg USART_IT_NE: Noise Error interrupt
+ * @arg USART_IT_FE: Framing Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of USART_IT (SET or RESET).
+ */
+ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT)
+{
+ uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00;
+ ITStatus bitstatus = RESET;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_GET_IT(USART_IT));
+
+ /* The CTS interrupt is not available for UART4 and UART5 */
+ if (USART_IT == USART_IT_CTS)
+ {
+ assert_param(IS_USART_1236_PERIPH(USARTx));
+ }
+
+ /* Get the USART register index */
+ usartreg = (((uint8_t)USART_IT) >> 0x05);
+ /* Get the interrupt position */
+ itmask = USART_IT & IT_MASK;
+ itmask = (uint32_t)0x01 << itmask;
+
+ if (usartreg == 0x01) /* The IT is in CR1 register */
+ {
+ itmask &= USARTx->CR1;
+ }
+ else if (usartreg == 0x02) /* The IT is in CR2 register */
+ {
+ itmask &= USARTx->CR2;
+ }
+ else /* The IT is in CR3 register */
+ {
+ itmask &= USARTx->CR3;
+ }
+
+ bitpos = USART_IT >> 0x08;
+ bitpos = (uint32_t)0x01 << bitpos;
+ bitpos &= USARTx->SR;
+ if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET))
+ {
+ bitstatus = SET;
+ }
+ else
+ {
+ bitstatus = RESET;
+ }
+
+ return bitstatus;
+}
+
+/**
+ * @brief Clears the USARTx's interrupt pending bits.
+ * @param USARTx: where x can be 1, 2, 3, 4, 5 or 6 to select the USART or
+ * UART peripheral.
+ * @param USART_IT: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg USART_IT_LBD: LIN Break detection interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt.
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) pending bits are cleared by
+ * software sequence: a read operation to USART_SR register
+ * (USART_GetITStatus()) followed by a read operation to USART_DR register
+ * (USART_ReceiveData()).
+ * @note RXNE pending bit can be also cleared by a read to the USART_DR register
+ * (USART_ReceiveData()).
+ * @note TC pending bit can be also cleared by software sequence: a read
+ * operation to USART_SR register (USART_GetITStatus()) followed by a write
+ * operation to USART_DR register (USART_SendData()).
+ * @note TXE pending bit is cleared only by a write to the USART_DR register
+ * (USART_SendData()).
+ *
+ * @retval None
+ */
+void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT)
+{
+ uint16_t bitpos = 0x00, itmask = 0x00;
+ /* Check the parameters */
+ assert_param(IS_USART_ALL_PERIPH(USARTx));
+ assert_param(IS_USART_CLEAR_IT(USART_IT));
+
+ /* The CTS interrupt is not available for UART4 and UART5 */
+ if (USART_IT == USART_IT_CTS)
+ {
+ assert_param(IS_USART_1236_PERIPH(USARTx));
+ }
+
+ bitpos = USART_IT >> 0x08;
+ itmask = ((uint16_t)0x01 << (uint16_t)bitpos);
+ USARTx->SR = (uint16_t)~itmask;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff -r 4985455162fc -r 1c6281289d67 stm32f4xx_usart.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32f4xx_usart.h Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,424 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_usart.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 30-September-2011
+ * @brief This file contains all the functions prototypes for the USART
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_USART_H
+#define __STM32F4xx_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief USART Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (USART_InitStruct->USART_BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
+ Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
+
+ uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USART_Word_Length */
+
+ uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint16_t USART_Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref USART_Hardware_Flow_Control */
+} USART_InitTypeDef;
+
+/**
+ * @brief USART Clock Init Structure definition
+ */
+
+typedef struct
+{
+
+ uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled.
+ This parameter can be a value of @ref USART_Clock */
+
+ uint16_t USART_CPOL; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+} USART_ClockInitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup USART_Exported_Constants
+ * @{
+ */
+
+#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3) || \
+ ((PERIPH) == UART4) || \
+ ((PERIPH) == UART5) || \
+ ((PERIPH) == USART6))
+
+#define IS_USART_1236_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+ ((PERIPH) == USART2) || \
+ ((PERIPH) == USART3) || \
+ ((PERIPH) == USART6))
+
+/** @defgroup USART_Word_Length
+ * @{
+ */
+
+#define USART_WordLength_8b ((uint16_t)0x0000)
+#define USART_WordLength_9b ((uint16_t)0x1000)
+
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \
+ ((LENGTH) == USART_WordLength_9b))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Stop_Bits
+ * @{
+ */
+
+#define USART_StopBits_1 ((uint16_t)0x0000)
+#define USART_StopBits_0_5 ((uint16_t)0x1000)
+#define USART_StopBits_2 ((uint16_t)0x2000)
+#define USART_StopBits_1_5 ((uint16_t)0x3000)
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \
+ ((STOPBITS) == USART_StopBits_0_5) || \
+ ((STOPBITS) == USART_StopBits_2) || \
+ ((STOPBITS) == USART_StopBits_1_5))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity
+ * @{
+ */
+
+#define USART_Parity_No ((uint16_t)0x0000)
+#define USART_Parity_Even ((uint16_t)0x0400)
+#define USART_Parity_Odd ((uint16_t)0x0600)
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \
+ ((PARITY) == USART_Parity_Even) || \
+ ((PARITY) == USART_Parity_Odd))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode
+ * @{
+ */
+
+#define USART_Mode_Rx ((uint16_t)0x0004)
+#define USART_Mode_Tx ((uint16_t)0x0008)
+#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Hardware_Flow_Control
+ * @{
+ */
+#define USART_HardwareFlowControl_None ((uint16_t)0x0000)
+#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100)
+#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200)
+#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300)
+#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == USART_HardwareFlowControl_None) || \
+ ((CONTROL) == USART_HardwareFlowControl_RTS) || \
+ ((CONTROL) == USART_HardwareFlowControl_CTS) || \
+ ((CONTROL) == USART_HardwareFlowControl_RTS_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock
+ * @{
+ */
+#define USART_Clock_Disable ((uint16_t)0x0000)
+#define USART_Clock_Enable ((uint16_t)0x0800)
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \
+ ((CLOCK) == USART_Clock_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity
+ * @{
+ */
+
+#define USART_CPOL_Low ((uint16_t)0x0000)
+#define USART_CPOL_High ((uint16_t)0x0400)
+#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase
+ * @{
+ */
+
+#define USART_CPHA_1Edge ((uint16_t)0x0000)
+#define USART_CPHA_2Edge ((uint16_t)0x0200)
+#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit
+ * @{
+ */
+
+#define USART_LastBit_Disable ((uint16_t)0x0000)
+#define USART_LastBit_Enable ((uint16_t)0x0100)
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \
+ ((LASTBIT) == USART_LastBit_Enable))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition
+ * @{
+ */
+
+#define USART_IT_PE ((uint16_t)0x0028)
+#define USART_IT_TXE ((uint16_t)0x0727)
+#define USART_IT_TC ((uint16_t)0x0626)
+#define USART_IT_RXNE ((uint16_t)0x0525)
+#define USART_IT_ORE_RX ((uint16_t)0x0325) /* In case interrupt is generated if the RXNEIE bit is set */
+#define USART_IT_IDLE ((uint16_t)0x0424)
+#define USART_IT_LBD ((uint16_t)0x0846)
+#define USART_IT_CTS ((uint16_t)0x096A)
+#define USART_IT_ERR ((uint16_t)0x0060)
+#define USART_IT_ORE_ER ((uint16_t)0x0360) /* In case interrupt is generated if the EIE bit is set */
+#define USART_IT_NE ((uint16_t)0x0260)
+#define USART_IT_FE ((uint16_t)0x0160)
+
+/** @defgroup USART_Legacy
+ * @{
+ */
+#define USART_IT_ORE USART_IT_ORE_ER
+/**
+ * @}
+ */
+
+#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
+ ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
+ ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR))
+#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
+ ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
+ ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \
+ ((IT) == USART_IT_ORE_RX) || ((IT) == USART_IT_ORE_ER) || \
+ ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE))
+#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+ ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup USART_DMA_Requests
+ * @{
+ */
+
+#define USART_DMAReq_Tx ((uint16_t)0x0080)
+#define USART_DMAReq_Rx ((uint16_t)0x0040)
+#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00))
+
+/**
+ * @}
+ */
+
+/** @defgroup USART_WakeUp_methods
+ * @{
+ */
+
+#define USART_WakeUp_IdleLine ((uint16_t)0x0000)
+#define USART_WakeUp_AddressMark ((uint16_t)0x0800)
+#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \
+ ((WAKEUP) == USART_WakeUp_AddressMark))
+/**
+ * @}
+ */
+
+/** @defgroup USART_LIN_Break_Detection_Length
+ * @{
+ */
+
+#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000)
+#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020)
+#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \
+ (((LENGTH) == USART_LINBreakDetectLength_10b) || \
+ ((LENGTH) == USART_LINBreakDetectLength_11b))
+/**
+ * @}
+ */
+
+/** @defgroup USART_IrDA_Low_Power
+ * @{
+ */
+
+#define USART_IrDAMode_LowPower ((uint16_t)0x0004)
+#define USART_IrDAMode_Normal ((uint16_t)0x0000)
+#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \
+ ((MODE) == USART_IrDAMode_Normal))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Flags
+ * @{
+ */
+
+#define USART_FLAG_CTS ((uint16_t)0x0200)
+#define USART_FLAG_LBD ((uint16_t)0x0100)
+#define USART_FLAG_TXE ((uint16_t)0x0080)
+#define USART_FLAG_TC ((uint16_t)0x0040)
+#define USART_FLAG_RXNE ((uint16_t)0x0020)
+#define USART_FLAG_IDLE ((uint16_t)0x0010)
+#define USART_FLAG_ORE ((uint16_t)0x0008)
+#define USART_FLAG_NE ((uint16_t)0x0004)
+#define USART_FLAG_FE ((uint16_t)0x0002)
+#define USART_FLAG_PE ((uint16_t)0x0001)
+#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \
+ ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \
+ ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \
+ ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \
+ ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE))
+
+#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00))
+
+#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 7500001))
+#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
+#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* Function used to set the USART configuration to the default reset state ***/
+void USART_DeInit(USART_TypeDef* USARTx);
+
+/* Initialization and Configuration functions *********************************/
+void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct);
+void USART_StructInit(USART_InitTypeDef* USART_InitStruct);
+void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct);
+void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct);
+void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler);
+void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+
+/* Data transfers functions ***************************************************/
+void USART_SendData(USART_TypeDef* USARTx, uint16_t Data);
+uint16_t USART_ReceiveData(USART_TypeDef* USARTx);
+
+/* Multi-Processor Communication functions ************************************/
+void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address);
+void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp);
+void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+
+/* LIN mode functions *********************************************************/
+void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength);
+void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SendBreak(USART_TypeDef* USARTx);
+
+/* Half-duplex mode function **************************************************/
+void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+
+/* Smartcard mode functions ***************************************************/
+void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime);
+
+/* IrDA mode functions ********************************************************/
+void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode);
+void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState);
+
+/* DMA transfers management functions *****************************************/
+void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState);
+
+/* Interrupts and flags management functions **********************************/
+void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState);
+FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG);
+void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG);
+ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT);
+void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_USART_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+