Diff: stm32f4xx_conf.h

Revision:

8:1c6281289d67

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32f4xx_conf.h	Sun Nov 15 09:00:40 2015 +0000
@@ -0,0 +1,90 @@
+/**
+  ******************************************************************************
+  * @file    Project/STM32F4xx_StdPeriph_Templates/stm32f4xx_conf.h  
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    30-September-2011
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_CONF_H
+#define __STM32F4xx_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Uncomment the line below to enable peripheral header file inclusion */
+//#include "stm32f4xx_adc.h"
+//#include "stm32f4xx_can.h"
+//#include "stm32f4xx_crc.h"
+//#include "stm32f4xx_cryp.h"
+//#include "stm32f4xx_dac.h"
+//#include "stm32f4xx_dbgmcu.h"
+//#include "stm32f4xx_dcmi.h"
+//#include "stm32f4xx_dma.h"
+//#include "stm32f4xx_exti.h"
+//#include "stm32f4xx_flash.h"
+//#include "stm32f4xx_fsmc.h"
+//#include "stm32f4xx_hash.h"
+//#include "stm32f4xx_gpio.h"
+//#include "stm32f4xx_i2c.h"
+//#include "stm32f4xx_iwdg.h"
+//#include "stm32f4xx_pwr.h"
+#include "stm32f4xx_rcc.h"
+//#include "stm32f4xx_rng.h"
+//#include "stm32f4xx_rtc.h"
+//#include "stm32f4xx_sdio.h"
+//#include "stm32f4xx_spi.h"
+//#include "stm32f4xx_syscfg.h"
+#include "stm32f4xx_tim.h"
+//#include "stm32f4xx_usart.h"
+//#include "stm32f4xx_wwdg.h"
+#include "misc.h"
+/* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* If an external clock source is used, then the value of the following define 
+   should be set to the value of the external clock source, else, if no external 
+   clock is used, keep this define commented */
+/*#define I2S_EXTERNAL_CLOCK_VAL   12288000 */ /* Value of the external clock in Hz */
+
+
+/* Uncomment the line below to expanse the "assert_param" macro in the 
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *   which reports the name of the source file and the source
+  *   line number of the call that failed. 
+  *   If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32F4xx_CONF_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+