Kenji Arai
/
FreeRTOS_on_mbed_v1
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Revision 0:d4960fcea8ff, committed 2011-01-01
- Comitter:
- kenjiArai
- Date:
- Sat Jan 01 11:17:45 2011 +0000
- Commit message:
Changed in this revision
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/Minimal/BlockQ.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/Minimal/BlockQ.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,308 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/*
+ * Creates six tasks that operate on three queues as follows:
+ *
+ * The first two tasks send and receive an incrementing number to/from a queue.
+ * One task acts as a producer and the other as the consumer. The consumer is a
+ * higher priority than the producer and is set to block on queue reads. The queue
+ * only has space for one item - as soon as the producer posts a message on the
+ * queue the consumer will unblock, pre-empt the producer, and remove the item.
+ *
+ * The second two tasks work the other way around. Again the queue used only has
+ * enough space for one item. This time the consumer has a lower priority than the
+ * producer. The producer will try to post on the queue blocking when the queue is
+ * full. When the consumer wakes it will remove the item from the queue, causing
+ * the producer to unblock, pre-empt the consumer, and immediately re-fill the
+ * queue.
+ *
+ * The last two tasks use the same queue producer and consumer functions. This time the queue has
+ * enough space for lots of items and the tasks operate at the same priority. The
+ * producer will execute, placing items into the queue. The consumer will start
+ * executing when either the queue becomes full (causing the producer to block) or
+ * a context switch occurs (tasks of the same priority will time slice).
+ *
+ */
+
+/*
+
+Changes from V4.1.1
+
+ + The second set of tasks were created the wrong way around. This has been
+ corrected.
+*/
+
+
+#include <stdlib.h>
+
+/* Scheduler include files. */
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+
+/* Demo program include files. */
+#include "BlockQ.h"
+
+#define blckqSTACK_SIZE configMINIMAL_STACK_SIZE
+#define blckqNUM_TASK_SETS ( 3 )
+
+/* Structure used to pass parameters to the blocking queue tasks. */
+typedef struct BLOCKING_QUEUE_PARAMETERS
+{
+ xQueueHandle xQueue; /*< The queue to be used by the task. */
+ portTickType xBlockTime; /*< The block time to use on queue reads/writes. */
+ volatile short *psCheckVariable; /*< Incremented on each successful cycle to check the task is still running. */
+} xBlockingQueueParameters;
+
+/* Task function that creates an incrementing number and posts it on a queue. */
+static portTASK_FUNCTION_PROTO( vBlockingQueueProducer, pvParameters );
+
+/* Task function that removes the incrementing number from a queue and checks that
+it is the expected number. */
+static portTASK_FUNCTION_PROTO( vBlockingQueueConsumer, pvParameters );
+
+/* Variables which are incremented each time an item is removed from a queue, and
+found to be the expected value.
+These are used to check that the tasks are still running. */
+static volatile short sBlockingConsumerCount[ blckqNUM_TASK_SETS ] = { ( unsigned short ) 0, ( unsigned short ) 0, ( unsigned short ) 0 };
+
+/* Variable which are incremented each time an item is posted on a queue. These
+are used to check that the tasks are still running. */
+static volatile short sBlockingProducerCount[ blckqNUM_TASK_SETS ] = { ( unsigned short ) 0, ( unsigned short ) 0, ( unsigned short ) 0 };
+
+/*-----------------------------------------------------------*/
+
+void vStartBlockingQueueTasks( unsigned portBASE_TYPE uxPriority )
+{
+xBlockingQueueParameters *pxQueueParameters1, *pxQueueParameters2;
+xBlockingQueueParameters *pxQueueParameters3, *pxQueueParameters4;
+xBlockingQueueParameters *pxQueueParameters5, *pxQueueParameters6;
+const unsigned portBASE_TYPE uxQueueSize1 = 1, uxQueueSize5 = 5;
+const portTickType xBlockTime = ( portTickType ) 1000 / portTICK_RATE_MS;
+const portTickType xDontBlock = ( portTickType ) 0;
+
+ /* Create the first two tasks as described at the top of the file. */
+
+ /* First create the structure used to pass parameters to the consumer tasks. */
+ pxQueueParameters1 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );
+
+ /* Create the queue used by the first two tasks to pass the incrementing number.
+ Pass a pointer to the queue in the parameter structure. */
+ pxQueueParameters1->xQueue = xQueueCreate( uxQueueSize1, ( unsigned portBASE_TYPE ) sizeof( unsigned short ) );
+
+ /* The consumer is created first so gets a block time as described above. */
+ pxQueueParameters1->xBlockTime = xBlockTime;
+
+ /* Pass in the variable that this task is going to increment so we can check it
+ is still running. */
+ pxQueueParameters1->psCheckVariable = &( sBlockingConsumerCount[ 0 ] );
+
+ /* Create the structure used to pass parameters to the producer task. */
+ pxQueueParameters2 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );
+
+ /* Pass the queue to this task also, using the parameter structure. */
+ pxQueueParameters2->xQueue = pxQueueParameters1->xQueue;
+
+ /* The producer is not going to block - as soon as it posts the consumer will
+ wake and remove the item so the producer should always have room to post. */
+ pxQueueParameters2->xBlockTime = xDontBlock;
+
+ /* Pass in the variable that this task is going to increment so we can check
+ it is still running. */
+ pxQueueParameters2->psCheckVariable = &( sBlockingProducerCount[ 0 ] );
+
+
+ /* Note the producer has a lower priority than the consumer when the tasks are
+ spawned. */
+ xTaskCreate( vBlockingQueueConsumer, ( signed char * ) "QConsB1", blckqSTACK_SIZE, ( void * ) pxQueueParameters1, uxPriority, NULL );
+ xTaskCreate( vBlockingQueueProducer, ( signed char * ) "QProdB2", blckqSTACK_SIZE, ( void * ) pxQueueParameters2, tskIDLE_PRIORITY, NULL );
+
+
+
+ /* Create the second two tasks as described at the top of the file. This uses
+ the same mechanism but reverses the task priorities. */
+
+ pxQueueParameters3 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );
+ pxQueueParameters3->xQueue = xQueueCreate( uxQueueSize1, ( unsigned portBASE_TYPE ) sizeof( unsigned short ) );
+ pxQueueParameters3->xBlockTime = xDontBlock;
+ pxQueueParameters3->psCheckVariable = &( sBlockingProducerCount[ 1 ] );
+
+ pxQueueParameters4 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );
+ pxQueueParameters4->xQueue = pxQueueParameters3->xQueue;
+ pxQueueParameters4->xBlockTime = xBlockTime;
+ pxQueueParameters4->psCheckVariable = &( sBlockingConsumerCount[ 1 ] );
+
+ xTaskCreate( vBlockingQueueConsumer, ( signed char * ) "QProdB3", blckqSTACK_SIZE, ( void * ) pxQueueParameters3, tskIDLE_PRIORITY, NULL );
+ xTaskCreate( vBlockingQueueProducer, ( signed char * ) "QConsB4", blckqSTACK_SIZE, ( void * ) pxQueueParameters4, uxPriority, NULL );
+
+
+
+ /* Create the last two tasks as described above. The mechanism is again just
+ the same. This time both parameter structures are given a block time. */
+ pxQueueParameters5 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );
+ pxQueueParameters5->xQueue = xQueueCreate( uxQueueSize5, ( unsigned portBASE_TYPE ) sizeof( unsigned short ) );
+ pxQueueParameters5->xBlockTime = xBlockTime;
+ pxQueueParameters5->psCheckVariable = &( sBlockingProducerCount[ 2 ] );
+
+ pxQueueParameters6 = ( xBlockingQueueParameters * ) pvPortMalloc( sizeof( xBlockingQueueParameters ) );
+ pxQueueParameters6->xQueue = pxQueueParameters5->xQueue;
+ pxQueueParameters6->xBlockTime = xBlockTime;
+ pxQueueParameters6->psCheckVariable = &( sBlockingConsumerCount[ 2 ] );
+
+ xTaskCreate( vBlockingQueueProducer, ( signed char * ) "QProdB5", blckqSTACK_SIZE, ( void * ) pxQueueParameters5, tskIDLE_PRIORITY, NULL );
+ xTaskCreate( vBlockingQueueConsumer, ( signed char * ) "QConsB6", blckqSTACK_SIZE, ( void * ) pxQueueParameters6, tskIDLE_PRIORITY, NULL );
+}
+/*-----------------------------------------------------------*/
+
+static portTASK_FUNCTION( vBlockingQueueProducer, pvParameters )
+{
+unsigned short usValue = 0;
+xBlockingQueueParameters *pxQueueParameters;
+short sErrorEverOccurred = pdFALSE;
+
+ pxQueueParameters = ( xBlockingQueueParameters * ) pvParameters;
+
+ for( ;; )
+ {
+ if( xQueueSend( pxQueueParameters->xQueue, ( void * ) &usValue, pxQueueParameters->xBlockTime ) != pdPASS )
+ {
+ sErrorEverOccurred = pdTRUE;
+ }
+ else
+ {
+ /* We have successfully posted a message, so increment the variable
+ used to check we are still running. */
+ if( sErrorEverOccurred == pdFALSE )
+ {
+ ( *pxQueueParameters->psCheckVariable )++;
+ }
+
+ /* Increment the variable we are going to post next time round. The
+ consumer will expect the numbers to follow in numerical order. */
+ ++usValue;
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+static portTASK_FUNCTION( vBlockingQueueConsumer, pvParameters )
+{
+unsigned short usData, usExpectedValue = 0;
+xBlockingQueueParameters *pxQueueParameters;
+short sErrorEverOccurred = pdFALSE;
+
+ pxQueueParameters = ( xBlockingQueueParameters * ) pvParameters;
+
+ for( ;; )
+ {
+ if( xQueueReceive( pxQueueParameters->xQueue, &usData, pxQueueParameters->xBlockTime ) == pdPASS )
+ {
+ if( usData != usExpectedValue )
+ {
+ /* Catch-up. */
+ usExpectedValue = usData;
+
+ sErrorEverOccurred = pdTRUE;
+ }
+ else
+ {
+ /* We have successfully received a message, so increment the
+ variable used to check we are still running. */
+ if( sErrorEverOccurred == pdFALSE )
+ {
+ ( *pxQueueParameters->psCheckVariable )++;
+ }
+
+ /* Increment the value we expect to remove from the queue next time
+ round. */
+ ++usExpectedValue;
+ }
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+/* This is called to check that all the created tasks are still running. */
+portBASE_TYPE xAreBlockingQueuesStillRunning( void )
+{
+static short sLastBlockingConsumerCount[ blckqNUM_TASK_SETS ] = { ( unsigned short ) 0, ( unsigned short ) 0, ( unsigned short ) 0 };
+static short sLastBlockingProducerCount[ blckqNUM_TASK_SETS ] = { ( unsigned short ) 0, ( unsigned short ) 0, ( unsigned short ) 0 };
+portBASE_TYPE xReturn = pdPASS, xTasks;
+
+ /* Not too worried about mutual exclusion on these variables as they are 16
+ bits and we are only reading them. We also only care to see if they have
+ changed or not.
+
+ Loop through each check variable to and return pdFALSE if any are found not
+ to have changed since the last call. */
+
+ for( xTasks = 0; xTasks < blckqNUM_TASK_SETS; xTasks++ )
+ {
+ if( sBlockingConsumerCount[ xTasks ] == sLastBlockingConsumerCount[ xTasks ] )
+ {
+ xReturn = pdFALSE;
+ }
+ sLastBlockingConsumerCount[ xTasks ] = sBlockingConsumerCount[ xTasks ];
+
+
+ if( sBlockingProducerCount[ xTasks ] == sLastBlockingProducerCount[ xTasks ] )
+ {
+ xReturn = pdFALSE;
+ }
+ sLastBlockingProducerCount[ xTasks ] = sBlockingProducerCount[ xTasks ];
+ }
+
+ return xReturn;
+}
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/Minimal/GenQTest.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/Minimal/GenQTest.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,572 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+
+/*
+ * Tests the extra queue functionality introduced in FreeRTOS.org V4.5.0 -
+ * including xQueueSendToFront(), xQueueSendToBack(), xQueuePeek() and
+ * mutex behaviour.
+ *
+ * See the comments above the prvSendFrontAndBackTest() and
+ * prvLowPriorityMutexTask() prototypes below for more information.
+ */
+
+
+#include <stdlib.h>
+
+/* Scheduler include files. */
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+#include "semphr.h"
+
+/* Demo program include files. */
+#include "GenQTest.h"
+
+#define genqQUEUE_LENGTH ( 5 )
+#define genqNO_BLOCK ( 0 )
+
+#define genqMUTEX_LOW_PRIORITY ( tskIDLE_PRIORITY )
+#define genqMUTEX_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )
+#define genqMUTEX_MEDIUM_PRIORITY ( tskIDLE_PRIORITY + 2 )
+#define genqMUTEX_HIGH_PRIORITY ( tskIDLE_PRIORITY + 3 )
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Tests the behaviour of the xQueueSendToFront() and xQueueSendToBack()
+ * macros by using both to fill a queue, then reading from the queue to
+ * check the resultant queue order is as expected. Queue data is also
+ * peeked.
+ */
+static void prvSendFrontAndBackTest( void *pvParameters );
+
+/*
+ * The following three tasks are used to demonstrate the mutex behaviour.
+ * Each task is given a different priority to demonstrate the priority
+ * inheritance mechanism.
+ *
+ * The low priority task obtains a mutex. After this a high priority task
+ * attempts to obtain the same mutex, causing its priority to be inherited
+ * by the low priority task. The task with the inherited high priority then
+ * resumes a medium priority task to ensure it is not blocked by the medium
+ * priority task while it holds the inherited high priority. Once the mutex
+ * is returned the task with the inherited priority returns to its original
+ * low priority, and is therefore immediately preempted by first the high
+ * priority task and then the medium prioroity task before it can continue.
+ */
+static void prvLowPriorityMutexTask( void *pvParameters );
+static void prvMediumPriorityMutexTask( void *pvParameters );
+static void prvHighPriorityMutexTask( void *pvParameters );
+
+/*-----------------------------------------------------------*/
+
+/* Flag that will be latched to pdTRUE should any unexpected behaviour be
+detected in any of the tasks. */
+static portBASE_TYPE xErrorDetected = pdFALSE;
+
+/* Counters that are incremented on each cycle of a test. This is used to
+detect a stalled task - a test that is no longer running. */
+static volatile unsigned portLONG ulLoopCounter = 0;
+static volatile unsigned portLONG ulLoopCounter2 = 0;
+
+/* The variable that is guarded by the mutex in the mutex demo tasks. */
+static volatile unsigned portLONG ulGuardedVariable = 0;
+
+/* Handles used in the mutext test to suspend and resume the high and medium
+priority mutex test tasks. */
+static xTaskHandle xHighPriorityMutexTask, xMediumPriorityMutexTask;
+
+/*-----------------------------------------------------------*/
+
+void vStartGenericQueueTasks( unsigned portBASE_TYPE uxPriority )
+{
+xQueueHandle xQueue;
+xSemaphoreHandle xMutex;
+
+ /* Create the queue that we are going to use for the
+ prvSendFrontAndBackTest demo. */
+ xQueue = xQueueCreate( genqQUEUE_LENGTH, sizeof( unsigned portLONG ) );
+
+ /* vQueueAddToRegistry() adds the queue to the queue registry, if one is
+ in use. The queue registry is provided as a means for kernel aware
+ debuggers to locate queues and has no purpose if a kernel aware debugger
+ is not being used. The call to vQueueAddToRegistry() will be removed
+ by the pre-processor if configQUEUE_REGISTRY_SIZE is not defined or is
+ defined to be less than 1. */
+ vQueueAddToRegistry( xQueue, ( signed portCHAR * ) "Gen_Queue_Test" );
+
+ /* Create the demo task and pass it the queue just created. We are
+ passing the queue handle by value so it does not matter that it is
+ declared on the stack here. */
+ xTaskCreate( prvSendFrontAndBackTest, ( signed portCHAR * )"GenQ", configMINIMAL_STACK_SIZE, ( void * ) xQueue, uxPriority, NULL );
+
+ /* Create the mutex used by the prvMutexTest task. */
+ xMutex = xSemaphoreCreateMutex();
+
+ /* vQueueAddToRegistry() adds the mutex to the registry, if one is
+ in use. The registry is provided as a means for kernel aware
+ debuggers to locate mutexes and has no purpose if a kernel aware debugger
+ is not being used. The call to vQueueAddToRegistry() will be removed
+ by the pre-processor if configQUEUE_REGISTRY_SIZE is not defined or is
+ defined to be less than 1. */
+ vQueueAddToRegistry( ( xQueueHandle ) xMutex, ( signed portCHAR * ) "Gen_Queue_Mutex" );
+
+ /* Create the mutex demo tasks and pass it the mutex just created. We are
+ passing the mutex handle by value so it does not matter that it is declared
+ on the stack here. */
+ xTaskCreate( prvLowPriorityMutexTask, ( signed portCHAR * )"MuLow", configMINIMAL_STACK_SIZE, ( void * ) xMutex, genqMUTEX_LOW_PRIORITY, NULL );
+ xTaskCreate( prvMediumPriorityMutexTask, ( signed portCHAR * )"MuMed", configMINIMAL_STACK_SIZE, NULL, genqMUTEX_MEDIUM_PRIORITY, &xMediumPriorityMutexTask );
+ xTaskCreate( prvHighPriorityMutexTask, ( signed portCHAR * )"MuHigh", configMINIMAL_STACK_SIZE, ( void * ) xMutex, genqMUTEX_HIGH_PRIORITY, &xHighPriorityMutexTask );
+}
+/*-----------------------------------------------------------*/
+
+static void prvSendFrontAndBackTest( void *pvParameters )
+{
+unsigned portLONG ulData, ulData2;
+xQueueHandle xQueue;
+
+ #ifdef USE_STDIO
+ void vPrintDisplayMessage( const portCHAR * const * ppcMessageToSend );
+
+ const portCHAR * const pcTaskStartMsg = "Queue SendToFront/SendToBack/Peek test started.\r\n";
+
+ /* Queue a message for printing to say the task has started. */
+ vPrintDisplayMessage( &pcTaskStartMsg );
+ #endif
+
+ xQueue = ( xQueueHandle ) pvParameters;
+
+ for( ;; )
+ {
+ /* The queue is empty, so sending an item to the back of the queue
+ should have the same efect as sending it to the front of the queue.
+
+ First send to the front and check everything is as expected. */
+ xQueueSendToFront( xQueue, ( void * ) &ulLoopCounter, genqNO_BLOCK );
+
+ if( uxQueueMessagesWaiting( xQueue ) != 1 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( xQueueReceive( xQueue, ( void * ) &ulData, genqNO_BLOCK ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* The data we sent to the queue should equal the data we just received
+ from the queue. */
+ if( ulLoopCounter != ulData )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* Then do the same, sending the data to the back, checking everything
+ is as expected. */
+ if( uxQueueMessagesWaiting( xQueue ) != 0 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ xQueueSendToBack( xQueue, ( void * ) &ulLoopCounter, genqNO_BLOCK );
+
+ if( uxQueueMessagesWaiting( xQueue ) != 1 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( xQueueReceive( xQueue, ( void * ) &ulData, genqNO_BLOCK ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( uxQueueMessagesWaiting( xQueue ) != 0 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* The data we sent to the queue should equal the data we just received
+ from the queue. */
+ if( ulLoopCounter != ulData )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ #if configUSE_PREEMPTION == 0
+ taskYIELD();
+ #endif
+
+
+
+ /* Place 2, 3, 4 into the queue, adding items to the back of the queue. */
+ for( ulData = 2; ulData < 5; ulData++ )
+ {
+ xQueueSendToBack( xQueue, ( void * ) &ulData, genqNO_BLOCK );
+ }
+
+ /* Now the order in the queue should be 2, 3, 4, with 2 being the first
+ thing to be read out. Now add 1 then 0 to the front of the queue. */
+ if( uxQueueMessagesWaiting( xQueue ) != 3 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+ ulData = 1;
+ xQueueSendToFront( xQueue, ( void * ) &ulData, genqNO_BLOCK );
+ ulData = 0;
+ xQueueSendToFront( xQueue, ( void * ) &ulData, genqNO_BLOCK );
+
+ /* Now the queue should be full, and when we read the data out we
+ should receive 0, 1, 2, 3, 4. */
+ if( uxQueueMessagesWaiting( xQueue ) != 5 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( xQueueSendToFront( xQueue, ( void * ) &ulData, genqNO_BLOCK ) != errQUEUE_FULL )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( xQueueSendToBack( xQueue, ( void * ) &ulData, genqNO_BLOCK ) != errQUEUE_FULL )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ #if configUSE_PREEMPTION == 0
+ taskYIELD();
+ #endif
+
+ /* Check the data we read out is in the expected order. */
+ for( ulData = 0; ulData < genqQUEUE_LENGTH; ulData++ )
+ {
+ /* Try peeking the data first. */
+ if( xQueuePeek( xQueue, &ulData2, genqNO_BLOCK ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( ulData != ulData2 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+
+ /* Now try receiving the data for real. The value should be the
+ same. Clobber the value first so we know we really received it. */
+ ulData2 = ~ulData2;
+ if( xQueueReceive( xQueue, &ulData2, genqNO_BLOCK ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( ulData != ulData2 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+ }
+
+ /* The queue should now be empty again. */
+ if( uxQueueMessagesWaiting( xQueue ) != 0 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ #if configUSE_PREEMPTION == 0
+ taskYIELD();
+ #endif
+
+
+ /* Our queue is empty once more, add 10, 11 to the back. */
+ ulData = 10;
+ if( xQueueSend( xQueue, &ulData, genqNO_BLOCK ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+ ulData = 11;
+ if( xQueueSend( xQueue, &ulData, genqNO_BLOCK ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( uxQueueMessagesWaiting( xQueue ) != 2 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* Now we should have 10, 11 in the queue. Add 7, 8, 9 to the
+ front. */
+ for( ulData = 9; ulData >= 7; ulData-- )
+ {
+ if( xQueueSendToFront( xQueue, ( void * ) &ulData, genqNO_BLOCK ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+ }
+
+ /* Now check that the queue is full, and that receiving data provides
+ the expected sequence of 7, 8, 9, 10, 11. */
+ if( uxQueueMessagesWaiting( xQueue ) != 5 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( xQueueSendToFront( xQueue, ( void * ) &ulData, genqNO_BLOCK ) != errQUEUE_FULL )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( xQueueSendToBack( xQueue, ( void * ) &ulData, genqNO_BLOCK ) != errQUEUE_FULL )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ #if configUSE_PREEMPTION == 0
+ taskYIELD();
+ #endif
+
+ /* Check the data we read out is in the expected order. */
+ for( ulData = 7; ulData < ( 7 + genqQUEUE_LENGTH ); ulData++ )
+ {
+ if( xQueueReceive( xQueue, &ulData2, genqNO_BLOCK ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( ulData != ulData2 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+ }
+
+ if( uxQueueMessagesWaiting( xQueue ) != 0 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ ulLoopCounter++;
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvLowPriorityMutexTask( void *pvParameters )
+{
+xSemaphoreHandle xMutex = ( xSemaphoreHandle ) pvParameters;
+
+ #ifdef USE_STDIO
+ void vPrintDisplayMessage( const portCHAR * const * ppcMessageToSend );
+
+ const portCHAR * const pcTaskStartMsg = "Mutex with priority inheritance test started.\r\n";
+
+ /* Queue a message for printing to say the task has started. */
+ vPrintDisplayMessage( &pcTaskStartMsg );
+ #endif
+
+ for( ;; )
+ {
+ /* Take the mutex. It should be available now. */
+ if( xSemaphoreTake( xMutex, genqNO_BLOCK ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* Set our guarded variable to a known start value. */
+ ulGuardedVariable = 0;
+
+ /* Our priority should be as per that assigned when the task was
+ created. */
+ if( uxTaskPriorityGet( NULL ) != genqMUTEX_LOW_PRIORITY )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* Now unsuspend the high priority task. This will attempt to take the
+ mutex, and block when it finds it cannot obtain it. */
+ vTaskResume( xHighPriorityMutexTask );
+
+ /* We should now have inherited the prioritoy of the high priority task,
+ as by now it will have attempted to get the mutex. */
+ if( uxTaskPriorityGet( NULL ) != genqMUTEX_HIGH_PRIORITY )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* We can attempt to set our priority to the test priority - between the
+ idle priority and the medium/high test priorities, but our actual
+ prioroity should remain at the high priority. */
+ vTaskPrioritySet( NULL, genqMUTEX_TEST_PRIORITY );
+ if( uxTaskPriorityGet( NULL ) != genqMUTEX_HIGH_PRIORITY )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* Now unsuspend the medium priority task. This should not run as our
+ inherited priority is above that of the medium priority task. */
+ vTaskResume( xMediumPriorityMutexTask );
+
+ /* If the did run then it will have incremented our guarded variable. */
+ if( ulGuardedVariable != 0 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* When we give back the semaphore our priority should be disinherited
+ back to the priority to which we attempted to set ourselves. This means
+ that when the high priority task next blocks, the medium priority task
+ should execute and increment the guarded variable. When we next run
+ both the high and medium priority tasks will have been suspended again. */
+ if( xSemaphoreGive( xMutex ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* Check that the guarded variable did indeed increment... */
+ if( ulGuardedVariable != 1 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* ... and that our priority has been disinherited to
+ genqMUTEX_TEST_PRIORITY. */
+ if( uxTaskPriorityGet( NULL ) != genqMUTEX_TEST_PRIORITY )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* Set our priority back to our original priority ready for the next
+ loop around this test. */
+ vTaskPrioritySet( NULL, genqMUTEX_LOW_PRIORITY );
+
+ /* Just to show we are still running. */
+ ulLoopCounter2++;
+
+ #if configUSE_PREEMPTION == 0
+ taskYIELD();
+ #endif
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvMediumPriorityMutexTask( void *pvParameters )
+{
+ ( void ) pvParameters;
+
+ for( ;; )
+ {
+ /* The medium priority task starts by suspending itself. The low
+ priority task will unsuspend this task when required. */
+ vTaskSuspend( NULL );
+
+ /* When this task unsuspends all it does is increment the guarded
+ variable, this is so the low priority task knows that it has
+ executed. */
+ ulGuardedVariable++;
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvHighPriorityMutexTask( void *pvParameters )
+{
+xSemaphoreHandle xMutex = ( xSemaphoreHandle ) pvParameters;
+
+ for( ;; )
+ {
+ /* The high priority task starts by suspending itself. The low
+ priority task will unsuspend this task when required. */
+ vTaskSuspend( NULL );
+
+ /* When this task unsuspends all it does is attempt to obtain
+ the mutex. It should find the mutex is not available so a
+ block time is specified. */
+ if( xSemaphoreTake( xMutex, portMAX_DELAY ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* When we eventually obtain the mutex we just give it back then
+ return to suspend ready for the next test. */
+ if( xSemaphoreGive( xMutex ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+/* This is called to check that all the created tasks are still running. */
+portBASE_TYPE xAreGenericQueueTasksStillRunning( void )
+{
+static unsigned portLONG ulLastLoopCounter = 0, ulLastLoopCounter2 = 0;
+
+ /* If the demo task is still running then we expect the loopcounters to
+ have incremented since this function was last called. */
+ if( ulLastLoopCounter == ulLoopCounter )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( ulLastLoopCounter2 == ulLoopCounter2 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ ulLastLoopCounter = ulLoopCounter;
+ ulLastLoopCounter2 = ulLoopCounter2;
+
+ /* Errors detected in the task itself will have latched xErrorDetected
+ to true. */
+
+ return !xErrorDetected;
+}
+
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/Minimal/PollQ.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/Minimal/PollQ.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,246 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/*
+ * This version of PollQ. c is for use on systems that have limited stack
+ * space and no display facilities. The complete version can be found in
+ * the Demo/Common/Full directory.
+ *
+ * Creates two tasks that communicate over a single queue. One task acts as a
+ * producer, the other a consumer.
+ *
+ * The producer loops for three iteration, posting an incrementing number onto the
+ * queue each cycle. It then delays for a fixed period before doing exactly the
+ * same again.
+ *
+ * The consumer loops emptying the queue. Each item removed from the queue is
+ * checked to ensure it contains the expected value. When the queue is empty it
+ * blocks for a fixed period, then does the same again.
+ *
+ * All queue access is performed without blocking. The consumer completely empties
+ * the queue each time it runs so the producer should never find the queue full.
+ *
+ * An error is flagged if the consumer obtains an unexpected value or the producer
+ * find the queue is full.
+ */
+
+/*
+Changes from V2.0.0
+
+ + Delay periods are now specified using variables and constants of
+ portTickType rather than unsigned long.
+*/
+
+#include <stdlib.h>
+
+/* Scheduler include files. */
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+
+/* Demo program include files. */
+#include "PollQ.h"
+
+#define pollqSTACK_SIZE configMINIMAL_STACK_SIZE
+#define pollqQUEUE_SIZE ( 10 )
+#define pollqPRODUCER_DELAY ( ( portTickType ) 200 / portTICK_RATE_MS )
+#define pollqCONSUMER_DELAY ( pollqPRODUCER_DELAY - ( portTickType ) ( 20 / portTICK_RATE_MS ) )
+#define pollqNO_DELAY ( ( portTickType ) 0 )
+#define pollqVALUES_TO_PRODUCE ( ( signed portBASE_TYPE ) 3 )
+#define pollqINITIAL_VALUE ( ( signed portBASE_TYPE ) 0 )
+
+/* The task that posts the incrementing number onto the queue. */
+static portTASK_FUNCTION_PROTO( vPolledQueueProducer, pvParameters );
+
+/* The task that empties the queue. */
+static portTASK_FUNCTION_PROTO( vPolledQueueConsumer, pvParameters );
+
+/* Variables that are used to check that the tasks are still running with no
+errors. */
+static volatile signed portBASE_TYPE xPollingConsumerCount = pollqINITIAL_VALUE, xPollingProducerCount = pollqINITIAL_VALUE;
+
+/*-----------------------------------------------------------*/
+
+void vStartPolledQueueTasks( unsigned portBASE_TYPE uxPriority )
+{
+static xQueueHandle xPolledQueue;
+
+ /* Create the queue used by the producer and consumer. */
+ xPolledQueue = xQueueCreate( pollqQUEUE_SIZE, ( unsigned portBASE_TYPE ) sizeof( unsigned short ) );
+
+ /* vQueueAddToRegistry() adds the queue to the queue registry, if one is
+ in use. The queue registry is provided as a means for kernel aware
+ debuggers to locate queues and has no purpose if a kernel aware debugger
+ is not being used. The call to vQueueAddToRegistry() will be removed
+ by the pre-processor if configQUEUE_REGISTRY_SIZE is not defined or is
+ defined to be less than 1. */
+ vQueueAddToRegistry( xPolledQueue, ( signed char * ) "Poll_Test_Queue" );
+
+ /* Spawn the producer and consumer. */
+ xTaskCreate( vPolledQueueConsumer, ( signed char * ) "QConsNB", pollqSTACK_SIZE, ( void * ) &xPolledQueue, uxPriority, ( xTaskHandle * ) NULL );
+ xTaskCreate( vPolledQueueProducer, ( signed char * ) "QProdNB", pollqSTACK_SIZE, ( void * ) &xPolledQueue, uxPriority, ( xTaskHandle * ) NULL );
+}
+/*-----------------------------------------------------------*/
+
+static portTASK_FUNCTION( vPolledQueueProducer, pvParameters )
+{
+unsigned short usValue = ( unsigned short ) 0;
+signed portBASE_TYPE xError = pdFALSE, xLoop;
+
+ for( ;; )
+ {
+ for( xLoop = 0; xLoop < pollqVALUES_TO_PRODUCE; xLoop++ )
+ {
+ /* Send an incrementing number on the queue without blocking. */
+ if( xQueueSend( *( ( xQueueHandle * ) pvParameters ), ( void * ) &usValue, pollqNO_DELAY ) != pdPASS )
+ {
+ /* We should never find the queue full so if we get here there
+ has been an error. */
+ xError = pdTRUE;
+ }
+ else
+ {
+ if( xError == pdFALSE )
+ {
+ /* If an error has ever been recorded we stop incrementing the
+ check variable. */
+ portENTER_CRITICAL();
+ xPollingProducerCount++;
+ portEXIT_CRITICAL();
+ }
+
+ /* Update the value we are going to post next time around. */
+ usValue++;
+ }
+ }
+
+ /* Wait before we start posting again to ensure the consumer runs and
+ empties the queue. */
+ vTaskDelay( pollqPRODUCER_DELAY );
+ }
+} /*lint !e818 Function prototype must conform to API. */
+/*-----------------------------------------------------------*/
+
+static portTASK_FUNCTION( vPolledQueueConsumer, pvParameters )
+{
+unsigned short usData, usExpectedValue = ( unsigned short ) 0;
+signed portBASE_TYPE xError = pdFALSE;
+
+ for( ;; )
+ {
+ /* Loop until the queue is empty. */
+ while( uxQueueMessagesWaiting( *( ( xQueueHandle * ) pvParameters ) ) )
+ {
+ if( xQueueReceive( *( ( xQueueHandle * ) pvParameters ), &usData, pollqNO_DELAY ) == pdPASS )
+ {
+ if( usData != usExpectedValue )
+ {
+ /* This is not what we expected to receive so an error has
+ occurred. */
+ xError = pdTRUE;
+
+ /* Catch-up to the value we received so our next expected
+ value should again be correct. */
+ usExpectedValue = usData;
+ }
+ else
+ {
+ if( xError == pdFALSE )
+ {
+ /* Only increment the check variable if no errors have
+ occurred. */
+ portENTER_CRITICAL();
+ xPollingConsumerCount++;
+ portEXIT_CRITICAL();
+ }
+ }
+
+ /* Next time round we would expect the number to be one higher. */
+ usExpectedValue++;
+ }
+ }
+
+ /* Now the queue is empty we block, allowing the producer to place more
+ items in the queue. */
+ vTaskDelay( pollqCONSUMER_DELAY );
+ }
+} /*lint !e818 Function prototype must conform to API. */
+/*-----------------------------------------------------------*/
+
+/* This is called to check that all the created tasks are still running with no errors. */
+portBASE_TYPE xArePollingQueuesStillRunning( void )
+{
+portBASE_TYPE xReturn;
+
+ /* Check both the consumer and producer poll count to check they have both
+ been changed since out last trip round. We do not need a critical section
+ around the check variables as this is called from a higher priority than
+ the other tasks that access the same variables. */
+ if( ( xPollingConsumerCount == pollqINITIAL_VALUE ) ||
+ ( xPollingProducerCount == pollqINITIAL_VALUE )
+ )
+ {
+ xReturn = pdFALSE;
+ }
+ else
+ {
+ xReturn = pdTRUE;
+ }
+
+ /* Set the check variables back down so we know if they have been
+ incremented the next time around. */
+ xPollingConsumerCount = pollqINITIAL_VALUE;
+ xPollingProducerCount = pollqINITIAL_VALUE;
+
+ return xReturn;
+}
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/Minimal/QPeek.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/Minimal/QPeek.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,446 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+
+/*
+ * Tests the behaviour when data is peeked from a queue when there are
+ * multiple tasks blocked on the queue.
+ */
+
+
+#include <stdlib.h>
+
+/* Scheduler include files. */
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+#include "semphr.h"
+
+/* Demo program include files. */
+#include "QPeek.h"
+
+#define qpeekQUEUE_LENGTH ( 5 )
+#define qpeekNO_BLOCK ( 0 )
+#define qpeekSHORT_DELAY ( 10 )
+
+#define qpeekLOW_PRIORITY ( tskIDLE_PRIORITY + 0 )
+#define qpeekMEDIUM_PRIORITY ( tskIDLE_PRIORITY + 1 )
+#define qpeekHIGH_PRIORITY ( tskIDLE_PRIORITY + 2 )
+#define qpeekHIGHEST_PRIORITY ( tskIDLE_PRIORITY + 3 )
+
+/*-----------------------------------------------------------*/
+
+/*
+ * The following three tasks are used to demonstrate the peeking behaviour.
+ * Each task is given a different priority to demonstrate the order in which
+ * tasks are woken as data is peeked from a queue.
+ */
+static void prvLowPriorityPeekTask( void *pvParameters );
+static void prvMediumPriorityPeekTask( void *pvParameters );
+static void prvHighPriorityPeekTask( void *pvParameters );
+static void prvHighestPriorityPeekTask( void *pvParameters );
+
+/*-----------------------------------------------------------*/
+
+/* Flag that will be latched to pdTRUE should any unexpected behaviour be
+detected in any of the tasks. */
+static volatile portBASE_TYPE xErrorDetected = pdFALSE;
+
+/* Counter that is incremented on each cycle of a test. This is used to
+detect a stalled task - a test that is no longer running. */
+static volatile unsigned portLONG ulLoopCounter = 0;
+
+/* Handles to the test tasks. */
+xTaskHandle xMediumPriorityTask, xHighPriorityTask, xHighestPriorityTask;
+/*-----------------------------------------------------------*/
+
+void vStartQueuePeekTasks( void )
+{
+xQueueHandle xQueue;
+
+ /* Create the queue that we are going to use for the test/demo. */
+ xQueue = xQueueCreate( qpeekQUEUE_LENGTH, sizeof( unsigned portLONG ) );
+
+ /* vQueueAddToRegistry() adds the queue to the queue registry, if one is
+ in use. The queue registry is provided as a means for kernel aware
+ debuggers to locate queues and has no purpose if a kernel aware debugger
+ is not being used. The call to vQueueAddToRegistry() will be removed
+ by the pre-processor if configQUEUE_REGISTRY_SIZE is not defined or is
+ defined to be less than 1. */
+ vQueueAddToRegistry( xQueue, ( signed portCHAR * ) "QPeek_Test_Queue" );
+
+ /* Create the demo tasks and pass it the queue just created. We are
+ passing the queue handle by value so it does not matter that it is declared
+ on the stack here. */
+ xTaskCreate( prvLowPriorityPeekTask, ( signed portCHAR * )"PeekL", configMINIMAL_STACK_SIZE, ( void * ) xQueue, qpeekLOW_PRIORITY, NULL );
+ xTaskCreate( prvMediumPriorityPeekTask, ( signed portCHAR * )"PeekM", configMINIMAL_STACK_SIZE, ( void * ) xQueue, qpeekMEDIUM_PRIORITY, &xMediumPriorityTask );
+ xTaskCreate( prvHighPriorityPeekTask, ( signed portCHAR * )"PeekH1", configMINIMAL_STACK_SIZE, ( void * ) xQueue, qpeekHIGH_PRIORITY, &xHighPriorityTask );
+ xTaskCreate( prvHighestPriorityPeekTask, ( signed portCHAR * )"PeekH2", configMINIMAL_STACK_SIZE, ( void * ) xQueue, qpeekHIGHEST_PRIORITY, &xHighestPriorityTask );
+}
+/*-----------------------------------------------------------*/
+
+static void prvHighestPriorityPeekTask( void *pvParameters )
+{
+xQueueHandle xQueue = ( xQueueHandle ) pvParameters;
+unsigned portLONG ulValue;
+
+ #ifdef USE_STDIO
+ {
+ void vPrintDisplayMessage( const portCHAR * const * ppcMessageToSend );
+
+ const portCHAR * const pcTaskStartMsg = "Queue peek test started.\r\n";
+
+ /* Queue a message for printing to say the task has started. */
+ vPrintDisplayMessage( &pcTaskStartMsg );
+ }
+ #endif
+
+ for( ;; )
+ {
+ /* Try peeking from the queue. The queue should be empty so we will
+ block, allowing the high priority task to execute. */
+ if( xQueuePeek( xQueue, &ulValue, portMAX_DELAY ) != pdPASS )
+ {
+ /* We expected to have received something by the time we unblock. */
+ xErrorDetected = pdTRUE;
+ }
+
+ /* When we reach here the high and medium priority tasks should still
+ be blocked on the queue. We unblocked because the low priority task
+ wrote a value to the queue, which we should have peeked. Peeking the
+ data (rather than receiving it) will leave the data on the queue, so
+ the high priority task should then have also been unblocked, but not
+ yet executed. */
+ if( ulValue != 0x11223344 )
+ {
+ /* We did not receive the expected value. */
+ xErrorDetected = pdTRUE;
+ }
+
+ if( uxQueueMessagesWaiting( xQueue ) != 1 )
+ {
+ /* The message should have been left on the queue. */
+ xErrorDetected = pdTRUE;
+ }
+
+ /* Now we are going to actually receive the data, so when the high
+ priority task runs it will find the queue empty and return to the
+ blocked state. */
+ ulValue = 0;
+ if( xQueueReceive( xQueue, &ulValue, qpeekNO_BLOCK ) != pdPASS )
+ {
+ /* We expected to receive the value. */
+ xErrorDetected = pdTRUE;
+ }
+
+ if( ulValue != 0x11223344 )
+ {
+ /* We did not receive the expected value - which should have been
+ the same value as was peeked. */
+ xErrorDetected = pdTRUE;
+ }
+
+ /* Now we will block again as the queue is once more empty. The low
+ priority task can then execute again. */
+ if( xQueuePeek( xQueue, &ulValue, portMAX_DELAY ) != pdPASS )
+ {
+ /* We expected to have received something by the time we unblock. */
+ xErrorDetected = pdTRUE;
+ }
+
+ /* When we get here the low priority task should have again written to the
+ queue. */
+ if( ulValue != 0x01234567 )
+ {
+ /* We did not receive the expected value. */
+ xErrorDetected = pdTRUE;
+ }
+
+ if( uxQueueMessagesWaiting( xQueue ) != 1 )
+ {
+ /* The message should have been left on the queue. */
+ xErrorDetected = pdTRUE;
+ }
+
+ /* We only peeked the data, so suspending ourselves now should enable
+ the high priority task to also peek the data. The high priority task
+ will have been unblocked when we peeked the data as we left the data
+ in the queue. */
+ vTaskSuspend( NULL );
+
+
+
+ /* This time we are going to do the same as the above test, but the
+ high priority task is going to receive the data, rather than peek it.
+ This means that the medium priority task should never peek the value. */
+ if( xQueuePeek( xQueue, &ulValue, portMAX_DELAY ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( ulValue != 0xaabbaabb )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ vTaskSuspend( NULL );
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvHighPriorityPeekTask( void *pvParameters )
+{
+xQueueHandle xQueue = ( xQueueHandle ) pvParameters;
+unsigned portLONG ulValue;
+
+ for( ;; )
+ {
+ /* Try peeking from the queue. The queue should be empty so we will
+ block, allowing the medium priority task to execute. Both the high
+ and highest priority tasks will then be blocked on the queue. */
+ if( xQueuePeek( xQueue, &ulValue, portMAX_DELAY ) != pdPASS )
+ {
+ /* We expected to have received something by the time we unblock. */
+ xErrorDetected = pdTRUE;
+ }
+
+ /* When we get here the highest priority task should have peeked the data
+ (unblocking this task) then suspended (allowing this task to also peek
+ the data). */
+ if( ulValue != 0x01234567 )
+ {
+ /* We did not receive the expected value. */
+ xErrorDetected = pdTRUE;
+ }
+
+ if( uxQueueMessagesWaiting( xQueue ) != 1 )
+ {
+ /* The message should have been left on the queue. */
+ xErrorDetected = pdTRUE;
+ }
+
+ /* We only peeked the data, so suspending ourselves now should enable
+ the medium priority task to also peek the data. The medium priority task
+ will have been unblocked when we peeked the data as we left the data
+ in the queue. */
+ vTaskSuspend( NULL );
+
+
+ /* This time we are going actually receive the value, so the medium
+ priority task will never peek the data - we removed it from the queue. */
+ if( xQueueReceive( xQueue, &ulValue, portMAX_DELAY ) != pdPASS )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ if( ulValue != 0xaabbaabb )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ vTaskSuspend( NULL );
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvMediumPriorityPeekTask( void *pvParameters )
+{
+xQueueHandle xQueue = ( xQueueHandle ) pvParameters;
+unsigned portLONG ulValue;
+
+ for( ;; )
+ {
+ /* Try peeking from the queue. The queue should be empty so we will
+ block, allowing the low priority task to execute. The highest, high
+ and medium priority tasks will then all be blocked on the queue. */
+ if( xQueuePeek( xQueue, &ulValue, portMAX_DELAY ) != pdPASS )
+ {
+ /* We expected to have received something by the time we unblock. */
+ xErrorDetected = pdTRUE;
+ }
+
+ /* When we get here the high priority task should have peeked the data
+ (unblocking this task) then suspended (allowing this task to also peek
+ the data). */
+ if( ulValue != 0x01234567 )
+ {
+ /* We did not receive the expected value. */
+ xErrorDetected = pdTRUE;
+ }
+
+ if( uxQueueMessagesWaiting( xQueue ) != 1 )
+ {
+ /* The message should have been left on the queue. */
+ xErrorDetected = pdTRUE;
+ }
+
+ /* Just so we know the test is still running. */
+ ulLoopCounter++;
+
+ /* Now we can suspend ourselves so the low priority task can execute
+ again. */
+ vTaskSuspend( NULL );
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvLowPriorityPeekTask( void *pvParameters )
+{
+xQueueHandle xQueue = ( xQueueHandle ) pvParameters;
+unsigned portLONG ulValue;
+
+ for( ;; )
+ {
+ /* Write some data to the queue. This should unblock the highest
+ priority task that is waiting to peek data from the queue. */
+ ulValue = 0x11223344;
+ if( xQueueSendToBack( xQueue, &ulValue, qpeekNO_BLOCK ) != pdPASS )
+ {
+ /* We were expecting the queue to be empty so we should not of
+ had a problem writing to the queue. */
+ xErrorDetected = pdTRUE;
+ }
+
+ /* By the time we get here the data should have been removed from
+ the queue. */
+ if( uxQueueMessagesWaiting( xQueue ) != 0 )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ /* Write another value to the queue, again waking the highest priority
+ task that is blocked on the queue. */
+ ulValue = 0x01234567;
+ if( xQueueSendToBack( xQueue, &ulValue, qpeekNO_BLOCK ) != pdPASS )
+ {
+ /* We were expecting the queue to be empty so we should not of
+ had a problem writing to the queue. */
+ xErrorDetected = pdTRUE;
+ }
+
+ /* All the other tasks should now have successfully peeked the data.
+ The data is still in the queue so we should be able to receive it. */
+ ulValue = 0;
+ if( xQueueReceive( xQueue, &ulValue, qpeekNO_BLOCK ) != pdPASS )
+ {
+ /* We expected to receive the data. */
+ xErrorDetected = pdTRUE;
+ }
+
+ if( ulValue != 0x01234567 )
+ {
+ /* We did not receive the expected value. */
+ }
+
+ /* Lets just delay a while as this is an intensive test as we don't
+ want to starve other tests of processing time. */
+ vTaskDelay( qpeekSHORT_DELAY );
+
+ /* Unsuspend the other tasks so we can repeat the test - this time
+ however not all the other tasks will peek the data as the high
+ priority task is actually going to remove it from the queue. Send
+ to front is used just to be different. As the queue is empty it
+ makes no difference to the result. */
+ vTaskResume( xMediumPriorityTask );
+ vTaskResume( xHighPriorityTask );
+ vTaskResume( xHighestPriorityTask );
+
+ ulValue = 0xaabbaabb;
+ if( xQueueSendToFront( xQueue, &ulValue, qpeekNO_BLOCK ) != pdPASS )
+ {
+ /* We were expecting the queue to be empty so we should not of
+ had a problem writing to the queue. */
+ xErrorDetected = pdTRUE;
+ }
+
+ /* This time we should find that the queue is empty. The high priority
+ task actually removed the data rather than just peeking it. */
+ if( xQueuePeek( xQueue, &ulValue, qpeekNO_BLOCK ) != errQUEUE_EMPTY )
+ {
+ /* We expected to receive the data. */
+ xErrorDetected = pdTRUE;
+ }
+
+ /* Unsuspend the highest and high priority tasks so we can go back
+ and repeat the whole thing. The medium priority task should not be
+ suspended as it was not able to peek the data in this last case. */
+ vTaskResume( xHighPriorityTask );
+ vTaskResume( xHighestPriorityTask );
+
+ /* Lets just delay a while as this is an intensive test as we don't
+ want to starve other tests of processing time. */
+ vTaskDelay( qpeekSHORT_DELAY );
+ }
+}
+/*-----------------------------------------------------------*/
+
+/* This is called to check that all the created tasks are still running. */
+portBASE_TYPE xAreQueuePeekTasksStillRunning( void )
+{
+static unsigned portLONG ulLastLoopCounter = 0;
+
+ /* If the demo task is still running then we expect the loopcounter to
+ have incremented since this function was last called. */
+ if( ulLastLoopCounter == ulLoopCounter )
+ {
+ xErrorDetected = pdTRUE;
+ }
+
+ ulLastLoopCounter = ulLoopCounter;
+
+ /* Errors detected in the task itself will have latched xErrorDetected
+ to true. */
+
+ return !xErrorDetected;
+}
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/Minimal/blocktim.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/Minimal/blocktim.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,493 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/*
+ * This file contains some test scenarios that ensure tasks do not exit queue
+ * send or receive functions prematurely. A description of the tests is
+ * included within the code.
+ */
+
+/* Kernel includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+
+/* Demo includes. */
+#include "blocktim.h"
+
+/* Task priorities. Allow these to be overridden. */
+#ifndef bktPRIMARY_PRIORITY
+ #define bktPRIMARY_PRIORITY ( 3 )
+#endif
+
+#ifndef bktSECONDARY_PRIORITY
+ #define bktSECONDARY_PRIORITY ( 2 )
+#endif
+
+/* Task behaviour. */
+#define bktQUEUE_LENGTH ( 5 )
+#define bktSHORT_WAIT ( ( ( portTickType ) 20 ) / portTICK_RATE_MS )
+#define bktPRIMARY_BLOCK_TIME ( 10 )
+#define bktALLOWABLE_MARGIN ( 15 )
+#define bktTIME_TO_BLOCK ( 175 )
+#define bktDONT_BLOCK ( ( portTickType ) 0 )
+#define bktRUN_INDICATOR ( ( unsigned portBASE_TYPE ) 0x55 )
+
+/* The queue on which the tasks block. */
+static xQueueHandle xTestQueue;
+
+/* Handle to the secondary task is required by the primary task for calls
+to vTaskSuspend/Resume(). */
+static xTaskHandle xSecondary;
+
+/* Used to ensure that tasks are still executing without error. */
+static volatile portBASE_TYPE xPrimaryCycles = 0, xSecondaryCycles = 0;
+static volatile portBASE_TYPE xErrorOccurred = pdFALSE;
+
+/* Provides a simple mechanism for the primary task to know when the
+secondary task has executed. */
+static volatile unsigned portBASE_TYPE xRunIndicator;
+
+/* The two test tasks. Their behaviour is commented within the files. */
+static void vPrimaryBlockTimeTestTask( void *pvParameters );
+static void vSecondaryBlockTimeTestTask( void *pvParameters );
+
+/*-----------------------------------------------------------*/
+
+void vCreateBlockTimeTasks( void )
+{
+ /* Create the queue on which the two tasks block. */
+ xTestQueue = xQueueCreate( bktQUEUE_LENGTH, sizeof( portBASE_TYPE ) );
+
+ /* vQueueAddToRegistry() adds the queue to the queue registry, if one is
+ in use. The queue registry is provided as a means for kernel aware
+ debuggers to locate queues and has no purpose if a kernel aware debugger
+ is not being used. The call to vQueueAddToRegistry() will be removed
+ by the pre-processor if configQUEUE_REGISTRY_SIZE is not defined or is
+ defined to be less than 1. */
+ vQueueAddToRegistry( xTestQueue, ( signed char * ) "Block_Time_Queue" );
+
+ /* Create the two test tasks. */
+ xTaskCreate( vPrimaryBlockTimeTestTask, ( signed char * )"BTest1", configMINIMAL_STACK_SIZE, NULL, bktPRIMARY_PRIORITY, NULL );
+ xTaskCreate( vSecondaryBlockTimeTestTask, ( signed char * )"BTest2", configMINIMAL_STACK_SIZE, NULL, bktSECONDARY_PRIORITY, &xSecondary );
+}
+/*-----------------------------------------------------------*/
+
+static void vPrimaryBlockTimeTestTask( void *pvParameters )
+{
+portBASE_TYPE xItem, xData;
+portTickType xTimeWhenBlocking;
+portTickType xTimeToBlock, xBlockedTime;
+
+ ( void ) pvParameters;
+
+ for( ;; )
+ {
+ /*********************************************************************
+ Test 1
+
+ Simple block time wakeup test on queue receives. */
+ for( xItem = 0; xItem < bktQUEUE_LENGTH; xItem++ )
+ {
+ /* The queue is empty. Attempt to read from the queue using a block
+ time. When we wake, ensure the delta in time is as expected. */
+ xTimeToBlock = bktPRIMARY_BLOCK_TIME << xItem;
+
+ xTimeWhenBlocking = xTaskGetTickCount();
+
+ /* We should unblock after xTimeToBlock having not received
+ anything on the queue. */
+ if( xQueueReceive( xTestQueue, &xData, xTimeToBlock ) != errQUEUE_EMPTY )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* How long were we blocked for? */
+ xBlockedTime = xTaskGetTickCount() - xTimeWhenBlocking;
+
+ if( xBlockedTime < xTimeToBlock )
+ {
+ /* Should not have blocked for less than we requested. */
+ xErrorOccurred = pdTRUE;
+ }
+
+ if( xBlockedTime > ( xTimeToBlock + bktALLOWABLE_MARGIN ) )
+ {
+ /* Should not have blocked for longer than we requested,
+ although we would not necessarily run as soon as we were
+ unblocked so a margin is allowed. */
+ xErrorOccurred = pdTRUE;
+ }
+ }
+
+ /*********************************************************************
+ Test 2
+
+ Simple block time wakeup test on queue sends.
+
+ First fill the queue. It should be empty so all sends should pass. */
+ for( xItem = 0; xItem < bktQUEUE_LENGTH; xItem++ )
+ {
+ if( xQueueSend( xTestQueue, &xItem, bktDONT_BLOCK ) != pdPASS )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ #if configUSE_PREEMPTION == 0
+ taskYIELD();
+ #endif
+ }
+
+ for( xItem = 0; xItem < bktQUEUE_LENGTH; xItem++ )
+ {
+ /* The queue is full. Attempt to write to the queue using a block
+ time. When we wake, ensure the delta in time is as expected. */
+ xTimeToBlock = bktPRIMARY_BLOCK_TIME << xItem;
+
+ xTimeWhenBlocking = xTaskGetTickCount();
+
+ /* We should unblock after xTimeToBlock having not received
+ anything on the queue. */
+ if( xQueueSend( xTestQueue, &xItem, xTimeToBlock ) != errQUEUE_FULL )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* How long were we blocked for? */
+ xBlockedTime = xTaskGetTickCount() - xTimeWhenBlocking;
+
+ if( xBlockedTime < xTimeToBlock )
+ {
+ /* Should not have blocked for less than we requested. */
+ xErrorOccurred = pdTRUE;
+ }
+
+ if( xBlockedTime > ( xTimeToBlock + bktALLOWABLE_MARGIN ) )
+ {
+ /* Should not have blocked for longer than we requested,
+ although we would not necessarily run as soon as we were
+ unblocked so a margin is allowed. */
+ xErrorOccurred = pdTRUE;
+ }
+ }
+
+ /*********************************************************************
+ Test 3
+
+ Wake the other task, it will block attempting to post to the queue.
+ When we read from the queue the other task will wake, but before it
+ can run we will post to the queue again. When the other task runs it
+ will find the queue still full, even though it was woken. It should
+ recognise that its block time has not expired and return to block for
+ the remains of its block time.
+
+ Wake the other task so it blocks attempting to post to the already
+ full queue. */
+ xRunIndicator = 0;
+ vTaskResume( xSecondary );
+
+ /* We need to wait a little to ensure the other task executes. */
+ while( xRunIndicator != bktRUN_INDICATOR )
+ {
+ /* The other task has not yet executed. */
+ vTaskDelay( bktSHORT_WAIT );
+ }
+ /* Make sure the other task is blocked on the queue. */
+ vTaskDelay( bktSHORT_WAIT );
+ xRunIndicator = 0;
+
+ for( xItem = 0; xItem < bktQUEUE_LENGTH; xItem++ )
+ {
+ /* Now when we make space on the queue the other task should wake
+ but not execute as this task has higher priority. */
+ if( xQueueReceive( xTestQueue, &xData, bktDONT_BLOCK ) != pdPASS )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* Now fill the queue again before the other task gets a chance to
+ execute. If the other task had executed we would find the queue
+ full ourselves, and the other task have set xRunIndicator. */
+ if( xQueueSend( xTestQueue, &xItem, bktDONT_BLOCK ) != pdPASS )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ if( xRunIndicator == bktRUN_INDICATOR )
+ {
+ /* The other task should not have executed. */
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* Raise the priority of the other task so it executes and blocks
+ on the queue again. */
+ vTaskPrioritySet( xSecondary, bktPRIMARY_PRIORITY + 2 );
+
+ /* The other task should now have re-blocked without exiting the
+ queue function. */
+ if( xRunIndicator == bktRUN_INDICATOR )
+ {
+ /* The other task should not have executed outside of the
+ queue function. */
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* Set the priority back down. */
+ vTaskPrioritySet( xSecondary, bktSECONDARY_PRIORITY );
+ }
+
+ /* Let the other task timeout. When it unblockes it will check that it
+ unblocked at the correct time, then suspend itself. */
+ while( xRunIndicator != bktRUN_INDICATOR )
+ {
+ vTaskDelay( bktSHORT_WAIT );
+ }
+ vTaskDelay( bktSHORT_WAIT );
+ xRunIndicator = 0;
+
+
+ /*********************************************************************
+ Test 4
+
+ As per test 3 - but with the send and receive the other way around.
+ The other task blocks attempting to read from the queue.
+
+ Empty the queue. We should find that it is full. */
+ for( xItem = 0; xItem < bktQUEUE_LENGTH; xItem++ )
+ {
+ if( xQueueReceive( xTestQueue, &xData, bktDONT_BLOCK ) != pdPASS )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+ }
+
+ /* Wake the other task so it blocks attempting to read from the
+ already empty queue. */
+ vTaskResume( xSecondary );
+
+ /* We need to wait a little to ensure the other task executes. */
+ while( xRunIndicator != bktRUN_INDICATOR )
+ {
+ vTaskDelay( bktSHORT_WAIT );
+ }
+ vTaskDelay( bktSHORT_WAIT );
+ xRunIndicator = 0;
+
+ for( xItem = 0; xItem < bktQUEUE_LENGTH; xItem++ )
+ {
+ /* Now when we place an item on the queue the other task should
+ wake but not execute as this task has higher priority. */
+ if( xQueueSend( xTestQueue, &xItem, bktDONT_BLOCK ) != pdPASS )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* Now empty the queue again before the other task gets a chance to
+ execute. If the other task had executed we would find the queue
+ empty ourselves, and the other task would be suspended. */
+ if( xQueueReceive( xTestQueue, &xData, bktDONT_BLOCK ) != pdPASS )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ if( xRunIndicator == bktRUN_INDICATOR )
+ {
+ /* The other task should not have executed. */
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* Raise the priority of the other task so it executes and blocks
+ on the queue again. */
+ vTaskPrioritySet( xSecondary, bktPRIMARY_PRIORITY + 2 );
+
+ /* The other task should now have re-blocked without exiting the
+ queue function. */
+ if( xRunIndicator == bktRUN_INDICATOR )
+ {
+ /* The other task should not have executed outside of the
+ queue function. */
+ xErrorOccurred = pdTRUE;
+ }
+ vTaskPrioritySet( xSecondary, bktSECONDARY_PRIORITY );
+ }
+
+ /* Let the other task timeout. When it unblockes it will check that it
+ unblocked at the correct time, then suspend itself. */
+ while( xRunIndicator != bktRUN_INDICATOR )
+ {
+ vTaskDelay( bktSHORT_WAIT );
+ }
+ vTaskDelay( bktSHORT_WAIT );
+
+ xPrimaryCycles++;
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void vSecondaryBlockTimeTestTask( void *pvParameters )
+{
+portTickType xTimeWhenBlocking, xBlockedTime;
+portBASE_TYPE xData;
+
+ ( void ) pvParameters;
+
+ for( ;; )
+ {
+ /*********************************************************************
+ Test 1 and 2
+
+ This task does does not participate in these tests. */
+ vTaskSuspend( NULL );
+
+ /*********************************************************************
+ Test 3
+
+ The first thing we do is attempt to read from the queue. It should be
+ full so we block. Note the time before we block so we can check the
+ wake time is as per that expected. */
+ xTimeWhenBlocking = xTaskGetTickCount();
+
+ /* We should unblock after bktTIME_TO_BLOCK having not sent
+ anything to the queue. */
+ xData = 0;
+ xRunIndicator = bktRUN_INDICATOR;
+ if( xQueueSend( xTestQueue, &xData, bktTIME_TO_BLOCK ) != errQUEUE_FULL )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* How long were we inside the send function? */
+ xBlockedTime = xTaskGetTickCount() - xTimeWhenBlocking;
+
+ /* We should not have blocked for less time than bktTIME_TO_BLOCK. */
+ if( xBlockedTime < bktTIME_TO_BLOCK )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* We should of not blocked for much longer than bktALLOWABLE_MARGIN
+ either. A margin is permitted as we would not necessarily run as
+ soon as we unblocked. */
+ if( xBlockedTime > ( bktTIME_TO_BLOCK + bktALLOWABLE_MARGIN ) )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* Suspend ready for test 3. */
+ xRunIndicator = bktRUN_INDICATOR;
+ vTaskSuspend( NULL );
+
+ /*********************************************************************
+ Test 4
+
+ As per test three, but with the send and receive reversed. */
+ xTimeWhenBlocking = xTaskGetTickCount();
+
+ /* We should unblock after bktTIME_TO_BLOCK having not received
+ anything on the queue. */
+ xRunIndicator = bktRUN_INDICATOR;
+ if( xQueueReceive( xTestQueue, &xData, bktTIME_TO_BLOCK ) != errQUEUE_EMPTY )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ xBlockedTime = xTaskGetTickCount() - xTimeWhenBlocking;
+
+ /* We should not have blocked for less time than bktTIME_TO_BLOCK. */
+ if( xBlockedTime < bktTIME_TO_BLOCK )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* We should of not blocked for much longer than bktALLOWABLE_MARGIN
+ either. A margin is permitted as we would not necessarily run as soon
+ as we unblocked. */
+ if( xBlockedTime > ( bktTIME_TO_BLOCK + bktALLOWABLE_MARGIN ) )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ xRunIndicator = bktRUN_INDICATOR;
+
+ xSecondaryCycles++;
+ }
+}
+/*-----------------------------------------------------------*/
+
+portBASE_TYPE xAreBlockTimeTestTasksStillRunning( void )
+{
+static portBASE_TYPE xLastPrimaryCycleCount = 0, xLastSecondaryCycleCount = 0;
+portBASE_TYPE xReturn = pdPASS;
+
+ /* Have both tasks performed at least one cycle since this function was
+ last called? */
+ if( xPrimaryCycles == xLastPrimaryCycleCount )
+ {
+ xReturn = pdFAIL;
+ }
+
+ if( xSecondaryCycles == xLastSecondaryCycleCount )
+ {
+ xReturn = pdFAIL;
+ }
+
+ if( xErrorOccurred == pdTRUE )
+ {
+ xReturn = pdFAIL;
+ }
+
+ xLastSecondaryCycleCount = xSecondaryCycles;
+ xLastPrimaryCycleCount = xPrimaryCycles;
+
+ return xReturn;
+}
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/Minimal/flash.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/Minimal/flash.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,145 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/**
+ * This version of flash .c is for use on systems that have limited stack space
+ * and no display facilities. The complete version can be found in the
+ * Demo/Common/Full directory.
+ *
+ * Three tasks are created, each of which flash an LED at a different rate. The first
+ * LED flashes every 200ms, the second every 400ms, the third every 600ms.
+ *
+ * The LED flash tasks provide instant visual feedback. They show that the scheduler
+ * is still operational.
+ *
+ */
+
+
+#include <stdlib.h>
+
+/* Scheduler include files. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+/* Demo program include files. */
+#include "partest.h"
+#include "flash.h"
+
+#define ledSTACK_SIZE configMINIMAL_STACK_SIZE
+#define ledNUMBER_OF_LEDS ( 3 )
+#define ledFLASH_RATE_BASE ( ( portTickType ) 333 )
+
+/* Variable used by the created tasks to calculate the LED number to use, and
+the rate at which they should flash the LED. */
+static volatile unsigned portBASE_TYPE uxFlashTaskNumber = 0;
+
+/* The task that is created three times. */
+static portTASK_FUNCTION_PROTO( vLEDFlashTask, pvParameters );
+
+/*-----------------------------------------------------------*/
+
+void vStartLEDFlashTasks( unsigned portBASE_TYPE uxPriority )
+{
+signed portBASE_TYPE xLEDTask;
+
+ /* Create the three tasks. */
+ for( xLEDTask = 0; xLEDTask < ledNUMBER_OF_LEDS; ++xLEDTask )
+ {
+ /* Spawn the task. */
+ xTaskCreate( vLEDFlashTask, ( signed char * ) "LEDx", ledSTACK_SIZE, NULL, uxPriority, ( xTaskHandle * ) NULL );
+ }
+}
+/*-----------------------------------------------------------*/
+
+static portTASK_FUNCTION( vLEDFlashTask, pvParameters )
+{
+portTickType xFlashRate, xLastFlashTime;
+unsigned portBASE_TYPE uxLED;
+
+ /* The parameters are not used. */
+ ( void ) pvParameters;
+
+ /* Calculate the LED and flash rate. */
+ portENTER_CRITICAL();
+ {
+ /* See which of the eight LED's we should use. */
+ uxLED = uxFlashTaskNumber;
+
+ /* Update so the next task uses the next LED. */
+ uxFlashTaskNumber++;
+ }
+ portEXIT_CRITICAL();
+
+ xFlashRate = ledFLASH_RATE_BASE + ( ledFLASH_RATE_BASE * ( portTickType ) uxLED );
+ xFlashRate /= portTICK_RATE_MS;
+
+ /* We will turn the LED on and off again in the delay period, so each
+ delay is only half the total period. */
+ xFlashRate /= ( portTickType ) 2;
+
+ /* We need to initialise xLastFlashTime prior to the first call to
+ vTaskDelayUntil(). */
+ xLastFlashTime = xTaskGetTickCount();
+
+ for(;;)
+ {
+ /* Delay for half the flash period then turn the LED on. */
+ vTaskDelayUntil( &xLastFlashTime, xFlashRate );
+ vParTestToggleLED( uxLED );
+
+ /* Delay for half the flash period then turn the LED off. */
+ vTaskDelayUntil( &xLastFlashTime, xFlashRate );
+ vParTestToggleLED( uxLED );
+ }
+} /*lint !e715 !e818 !e830 Function definition must be standard for task creation. */
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/Minimal/integer.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/Minimal/integer.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,212 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/*
+ * This version of integer. c is for use on systems that have limited stack
+ * space and no display facilities. The complete version can be found in
+ * the Demo/Common/Full directory.
+ *
+ * As with the full version, the tasks created in this file are a good test
+ * of the scheduler context switch mechanism. The processor has to access
+ * 32bit variables in two or four chunks (depending on the processor). The low
+ * priority of these tasks means there is a high probability that a context
+ * switch will occur mid calculation. See flop. c documentation for
+ * more information.
+ *
+ */
+
+/*
+Changes from V1.2.1
+
+ + The constants used in the calculations are larger to ensure the
+ optimiser does not truncate them to 16 bits.
+
+Changes from V1.2.3
+
+ + uxTaskCheck is now just used as a boolean. Instead of incrementing
+ the variable each cycle of the task, the variable is simply set to
+ true. sAreIntegerMathsTaskStillRunning() sets it back to false and
+ expects it to have been set back to true by the time it is called
+ again.
+ + A division has been included in the calculation.
+*/
+
+#include <stdlib.h>
+
+/* Scheduler include files. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+/* Demo program include files. */
+#include "integer.h"
+
+/* The constants used in the calculation. */
+#define intgCONST1 ( ( long ) 123 )
+#define intgCONST2 ( ( long ) 234567 )
+#define intgCONST3 ( ( long ) -3 )
+#define intgCONST4 ( ( long ) 7 )
+#define intgEXPECTED_ANSWER ( ( ( intgCONST1 + intgCONST2 ) * intgCONST3 ) / intgCONST4 )
+
+#define intgSTACK_SIZE configMINIMAL_STACK_SIZE
+
+/* As this is the minimal version, we will only create one task. */
+#define intgNUMBER_OF_TASKS ( 1 )
+
+/* The task function. Repeatedly performs a 32 bit calculation, checking the
+result against the expected result. If the result is incorrect then the
+context switch must have caused some corruption. */
+static portTASK_FUNCTION_PROTO( vCompeteingIntMathTask, pvParameters );
+
+/* Variables that are set to true within the calculation task to indicate
+that the task is still executing. The check task sets the variable back to
+false, flagging an error if the variable is still false the next time it
+is called. */
+static volatile signed portBASE_TYPE xTaskCheck[ intgNUMBER_OF_TASKS ] = { ( signed portBASE_TYPE ) pdFALSE };
+
+/*-----------------------------------------------------------*/
+
+void vStartIntegerMathTasks( unsigned portBASE_TYPE uxPriority )
+{
+short sTask;
+
+ for( sTask = 0; sTask < intgNUMBER_OF_TASKS; sTask++ )
+ {
+ xTaskCreate( vCompeteingIntMathTask, ( signed char * ) "IntMath", intgSTACK_SIZE, ( void * ) &( xTaskCheck[ sTask ] ), uxPriority, ( xTaskHandle * ) NULL );
+ }
+}
+/*-----------------------------------------------------------*/
+
+static portTASK_FUNCTION( vCompeteingIntMathTask, pvParameters )
+{
+/* These variables are all effectively set to constants so they are volatile to
+ensure the compiler does not just get rid of them. */
+volatile long lValue;
+short sError = pdFALSE;
+volatile signed portBASE_TYPE *pxTaskHasExecuted;
+
+ /* Set a pointer to the variable we are going to set to true each
+ iteration. This is also a good test of the parameter passing mechanism
+ within each port. */
+ pxTaskHasExecuted = ( volatile signed portBASE_TYPE * ) pvParameters;
+
+ /* Keep performing a calculation and checking the result against a constant. */
+ for( ;; )
+ {
+ /* Perform the calculation. This will store partial value in
+ registers, resulting in a good test of the context switch mechanism. */
+ lValue = intgCONST1;
+ lValue += intgCONST2;
+
+ /* Yield in case cooperative scheduling is being used. */
+ #if configUSE_PREEMPTION == 0
+ {
+ taskYIELD();
+ }
+ #endif
+
+ /* Finish off the calculation. */
+ lValue *= intgCONST3;
+ lValue /= intgCONST4;
+
+ /* If the calculation is found to be incorrect we stop setting the
+ TaskHasExecuted variable so the check task can see an error has
+ occurred. */
+ if( lValue != intgEXPECTED_ANSWER ) /*lint !e774 volatile used to prevent this being optimised out. */
+ {
+ sError = pdTRUE;
+ }
+
+ if( sError == pdFALSE )
+ {
+ /* We have not encountered any errors, so set the flag that show
+ we are still executing. This will be periodically cleared by
+ the check task. */
+ portENTER_CRITICAL();
+ *pxTaskHasExecuted = pdTRUE;
+ portEXIT_CRITICAL();
+ }
+
+ /* Yield in case cooperative scheduling is being used. */
+ #if configUSE_PREEMPTION == 0
+ {
+ taskYIELD();
+ }
+ #endif
+ }
+}
+/*-----------------------------------------------------------*/
+
+/* This is called to check that all the created tasks are still running. */
+portBASE_TYPE xAreIntegerMathsTaskStillRunning( void )
+{
+portBASE_TYPE xReturn = pdTRUE;
+short sTask;
+
+ /* Check the maths tasks are still running by ensuring their check variables
+ are still being set to true. */
+ for( sTask = 0; sTask < intgNUMBER_OF_TASKS; sTask++ )
+ {
+ if( xTaskCheck[ sTask ] == pdFALSE )
+ {
+ /* The check has not incremented so an error exists. */
+ xReturn = pdFALSE;
+ }
+
+ /* Reset the check variable so we can tell if it has been set by
+ the next time around. */
+ xTaskCheck[ sTask ] = pdFALSE;
+ }
+
+ return xReturn;
+}
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/Minimal/recmutex.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/Minimal/recmutex.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,369 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/*
+ The tasks defined on this page demonstrate the use of recursive mutexes.
+
+ For recursive mutex functionality the created mutex should be created using
+ xSemaphoreCreateRecursiveMutex(), then be manipulated
+ using the xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() API
+ functions.
+
+ This demo creates three tasks all of which access the same recursive mutex:
+
+ prvRecursiveMutexControllingTask() has the highest priority so executes
+ first and grabs the mutex. It then performs some recursive accesses -
+ between each of which it sleeps for a short period to let the lower
+ priority tasks execute. When it has completed its demo functionality
+ it gives the mutex back before suspending itself.
+
+ prvRecursiveMutexBlockingTask() attempts to access the mutex by performing
+ a blocking 'take'. The blocking task has a lower priority than the
+ controlling task so by the time it executes the mutex has already been
+ taken by the controlling task, causing the blocking task to block. It
+ does not unblock until the controlling task has given the mutex back,
+ and it does not actually run until the controlling task has suspended
+ itself (due to the relative priorities). When it eventually does obtain
+ the mutex all it does is give the mutex back prior to also suspending
+ itself. At this point both the controlling task and the blocking task are
+ suspended.
+
+ prvRecursiveMutexPollingTask() runs at the idle priority. It spins round
+ a tight loop attempting to obtain the mutex with a non-blocking call. As
+ the lowest priority task it will not successfully obtain the mutex until
+ both the controlling and blocking tasks are suspended. Once it eventually
+ does obtain the mutex it first unsuspends both the controlling task and
+ blocking task prior to giving the mutex back - resulting in the polling
+ task temporarily inheriting the controlling tasks priority.
+*/
+
+/* Scheduler include files. */
+#include "FreeRTOS.h"
+#include "task.h"
+#include "semphr.h"
+
+/* Demo app include files. */
+#include "recmutex.h"
+
+/* Priorities assigned to the three tasks. */
+#define recmuCONTROLLING_TASK_PRIORITY ( tskIDLE_PRIORITY + 2 )
+#define recmuBLOCKING_TASK_PRIORITY ( tskIDLE_PRIORITY + 1 )
+#define recmuPOLLING_TASK_PRIORITY ( tskIDLE_PRIORITY + 0 )
+
+/* The recursive call depth. */
+#define recmuMAX_COUNT ( 10 )
+
+/* Misc. */
+#define recmuSHORT_DELAY ( 20 / portTICK_RATE_MS )
+#define recmuNO_DELAY ( ( portTickType ) 0 )
+#define recmuTWO_TICK_DELAY ( ( portTickType ) 2 )
+
+/* The three tasks as described at the top of this file. */
+static void prvRecursiveMutexControllingTask( void *pvParameters );
+static void prvRecursiveMutexBlockingTask( void *pvParameters );
+static void prvRecursiveMutexPollingTask( void *pvParameters );
+
+/* The mutex used by the demo. */
+static xSemaphoreHandle xMutex;
+
+/* Variables used to detect and latch errors. */
+static volatile portBASE_TYPE xErrorOccurred = pdFALSE, xControllingIsSuspended = pdFALSE, xBlockingIsSuspended = pdFALSE;
+static volatile unsigned portBASE_TYPE uxControllingCycles = 0, uxBlockingCycles, uxPollingCycles = 0;
+
+/* Handles of the two higher priority tasks, required so they can be resumed
+(unsuspended). */
+static xTaskHandle xControllingTaskHandle, xBlockingTaskHandle;
+
+/*-----------------------------------------------------------*/
+
+void vStartRecursiveMutexTasks( void )
+{
+ /* Just creates the mutex and the three tasks. */
+
+ xMutex = xSemaphoreCreateRecursiveMutex();
+
+ /* vQueueAddToRegistry() adds the mutex to the registry, if one is
+ in use. The registry is provided as a means for kernel aware
+ debuggers to locate mutex and has no purpose if a kernel aware debugger
+ is not being used. The call to vQueueAddToRegistry() will be removed
+ by the pre-processor if configQUEUE_REGISTRY_SIZE is not defined or is
+ defined to be less than 1. */
+ vQueueAddToRegistry( ( xQueueHandle ) xMutex, ( signed portCHAR * ) "Recursive_Mutex" );
+
+
+ if( xMutex != NULL )
+ {
+ xTaskCreate( prvRecursiveMutexControllingTask, ( signed portCHAR * ) "Rec1", configMINIMAL_STACK_SIZE, NULL, recmuCONTROLLING_TASK_PRIORITY, &xControllingTaskHandle );
+ xTaskCreate( prvRecursiveMutexBlockingTask, ( signed portCHAR * ) "Rec2", configMINIMAL_STACK_SIZE, NULL, recmuBLOCKING_TASK_PRIORITY, &xBlockingTaskHandle );
+ xTaskCreate( prvRecursiveMutexPollingTask, ( signed portCHAR * ) "Rec3", configMINIMAL_STACK_SIZE, NULL, recmuPOLLING_TASK_PRIORITY, NULL );
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvRecursiveMutexControllingTask( void *pvParameters )
+{
+unsigned portBASE_TYPE ux;
+
+ /* Just to remove compiler warning. */
+ ( void ) pvParameters;
+
+ for( ;; )
+ {
+ /* Should not be able to 'give' the mutex, as we have not yet 'taken'
+ it. */
+ if( xSemaphoreGiveRecursive( xMutex ) == pdPASS )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ for( ux = 0; ux < recmuMAX_COUNT; ux++ )
+ {
+ /* We should now be able to take the mutex as many times as
+ we like. A one tick delay is used so the polling task will
+ inherit our priority on all but the first cycle of this task.
+ If we did not block attempting to receive the mutex then no
+ priority inheritance would occur. */
+ if( xSemaphoreTakeRecursive( xMutex, recmuTWO_TICK_DELAY ) != pdPASS )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* Ensure the other task attempting to access the mutex (and the
+ other demo tasks) are able to execute. */
+ vTaskDelay( recmuSHORT_DELAY );
+ }
+
+ /* For each time we took the mutex, give it back. */
+ for( ux = 0; ux < recmuMAX_COUNT; ux++ )
+ {
+ /* Ensure the other task attempting to access the mutex (and the
+ other demo tasks) are able to execute. */
+ vTaskDelay( recmuSHORT_DELAY );
+
+ /* We should now be able to give the mutex as many times as we
+ took it. */
+ if( xSemaphoreGiveRecursive( xMutex ) != pdPASS )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+ }
+
+ /* Having given it back the same number of times as it was taken, we
+ should no longer be the mutex owner, so the next give sh ould fail. */
+ if( xSemaphoreGiveRecursive( xMutex ) == pdPASS )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* Keep count of the number of cycles this task has performed so a
+ stall can be detected. */
+ uxControllingCycles++;
+
+ /* Suspend ourselves to the blocking task can execute. */
+ xControllingIsSuspended = pdTRUE;
+ vTaskSuspend( NULL );
+ xControllingIsSuspended = pdFALSE;
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvRecursiveMutexBlockingTask( void *pvParameters )
+{
+ /* Just to remove compiler warning. */
+ ( void ) pvParameters;
+
+ for( ;; )
+ {
+ /* Attempt to obtain the mutex. We should block until the
+ controlling task has given up the mutex, and not actually execute
+ past this call until the controlling task is suspended. */
+ if( xSemaphoreTakeRecursive( xMutex, portMAX_DELAY ) == pdPASS )
+ {
+ if( xControllingIsSuspended != pdTRUE )
+ {
+ /* Did not expect to execute until the controlling task was
+ suspended. */
+ xErrorOccurred = pdTRUE;
+ }
+ else
+ {
+ /* Give the mutex back before suspending ourselves to allow
+ the polling task to obtain the mutex. */
+ if( xSemaphoreGiveRecursive( xMutex ) != pdPASS )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ xBlockingIsSuspended = pdTRUE;
+ vTaskSuspend( NULL );
+ xBlockingIsSuspended = pdFALSE;
+ }
+ }
+ else
+ {
+ /* We should not leave the xSemaphoreTakeRecursive() function
+ until the mutex was obtained. */
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* The controlling and blocking tasks should be in lock step. */
+ if( uxControllingCycles != ( uxBlockingCycles + 1 ) )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+
+ /* Keep count of the number of cycles this task has performed so a
+ stall can be detected. */
+ uxBlockingCycles++;
+ }
+}
+/*-----------------------------------------------------------*/
+
+static void prvRecursiveMutexPollingTask( void *pvParameters )
+{
+ /* Just to remove compiler warning. */
+ ( void ) pvParameters;
+
+ for( ;; )
+ {
+ /* Keep attempting to obtain the mutex. We should only obtain it when
+ the blocking task has suspended itself. */
+ if( xSemaphoreTakeRecursive( xMutex, recmuNO_DELAY ) == pdPASS )
+ {
+ /* Is the blocking task suspended? */
+ if( xBlockingIsSuspended != pdTRUE )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+ else
+ {
+ /* Keep count of the number of cycles this task has performed so
+ a stall can be detected. */
+ uxPollingCycles++;
+
+ /* We can resume the other tasks here even though they have a
+ higher priority than the polling task. When they execute they
+ will attempt to obtain the mutex but fail because the polling
+ task is still the mutex holder. The polling task (this task)
+ will then inherit the higher priority. */
+ vTaskResume( xBlockingTaskHandle );
+ vTaskResume( xControllingTaskHandle );
+
+ /* Release the mutex, disinheriting the higher priority again. */
+ if( xSemaphoreGiveRecursive( xMutex ) != pdPASS )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+ }
+ }
+
+ #if configUSE_PREEMPTION == 0
+ {
+ taskYIELD();
+ }
+ #endif
+ }
+}
+/*-----------------------------------------------------------*/
+
+/* This is called to check that all the created tasks are still running. */
+portBASE_TYPE xAreRecursiveMutexTasksStillRunning( void )
+{
+portBASE_TYPE xReturn;
+static unsigned portBASE_TYPE uxLastControllingCycles = 0, uxLastBlockingCycles = 0, uxLastPollingCycles = 0;
+
+ /* Is the controlling task still cycling? */
+ if( uxLastControllingCycles == uxControllingCycles )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+ else
+ {
+ uxLastControllingCycles = uxControllingCycles;
+ }
+
+ /* Is the blocking task still cycling? */
+ if( uxLastBlockingCycles == uxBlockingCycles )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+ else
+ {
+ uxLastBlockingCycles = uxBlockingCycles;
+ }
+
+ /* Is the polling task still cycling? */
+ if( uxLastPollingCycles == uxPollingCycles )
+ {
+ xErrorOccurred = pdTRUE;
+ }
+ else
+ {
+ uxLastPollingCycles = uxPollingCycles;
+ }
+
+ if( xErrorOccurred == pdTRUE )
+ {
+ xReturn = pdFAIL;
+ }
+ else
+ {
+ xReturn = pdTRUE;
+ }
+
+ return xReturn;
+}
+
+
+
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/Minimal/semtest.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/Minimal/semtest.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,285 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/*
+ * Creates two sets of two tasks. The tasks within a set share a variable, access
+ * to which is guarded by a semaphore.
+ *
+ * Each task starts by attempting to obtain the semaphore. On obtaining a
+ * semaphore a task checks to ensure that the guarded variable has an expected
+ * value. It then clears the variable to zero before counting it back up to the
+ * expected value in increments of 1. After each increment the variable is checked
+ * to ensure it contains the value to which it was just set. When the starting
+ * value is again reached the task releases the semaphore giving the other task in
+ * the set a chance to do exactly the same thing. The starting value is high
+ * enough to ensure that a tick is likely to occur during the incrementing loop.
+ *
+ * An error is flagged if at any time during the process a shared variable is
+ * found to have a value other than that expected. Such an occurrence would
+ * suggest an error in the mutual exclusion mechanism by which access to the
+ * variable is restricted.
+ *
+ * The first set of two tasks poll their semaphore. The second set use blocking
+ * calls.
+ *
+ */
+
+
+#include <stdlib.h>
+
+/* Scheduler include files. */
+#include "FreeRTOS.h"
+#include "task.h"
+#include "semphr.h"
+
+
+/* Demo app include files. */
+#include "semtest.h"
+
+/* The value to which the shared variables are counted. */
+#define semtstBLOCKING_EXPECTED_VALUE ( ( unsigned long ) 0xfff )
+#define semtstNON_BLOCKING_EXPECTED_VALUE ( ( unsigned long ) 0xff )
+
+#define semtstSTACK_SIZE configMINIMAL_STACK_SIZE
+
+#define semtstNUM_TASKS ( 4 )
+
+#define semtstDELAY_FACTOR ( ( portTickType ) 10 )
+
+/* The task function as described at the top of the file. */
+static portTASK_FUNCTION_PROTO( prvSemaphoreTest, pvParameters );
+
+/* Structure used to pass parameters to each task. */
+typedef struct SEMAPHORE_PARAMETERS
+{
+ xSemaphoreHandle xSemaphore;
+ volatile unsigned long *pulSharedVariable;
+ portTickType xBlockTime;
+} xSemaphoreParameters;
+
+/* Variables used to check that all the tasks are still running without errors. */
+static volatile short sCheckVariables[ semtstNUM_TASKS ] = { 0 };
+static volatile short sNextCheckVariable = 0;
+
+/*-----------------------------------------------------------*/
+
+void vStartSemaphoreTasks( unsigned portBASE_TYPE uxPriority )
+{
+xSemaphoreParameters *pxFirstSemaphoreParameters, *pxSecondSemaphoreParameters;
+const portTickType xBlockTime = ( portTickType ) 100;
+
+ /* Create the structure used to pass parameters to the first two tasks. */
+ pxFirstSemaphoreParameters = ( xSemaphoreParameters * ) pvPortMalloc( sizeof( xSemaphoreParameters ) );
+
+ if( pxFirstSemaphoreParameters != NULL )
+ {
+ /* Create the semaphore used by the first two tasks. */
+ vSemaphoreCreateBinary( pxFirstSemaphoreParameters->xSemaphore );
+
+ if( pxFirstSemaphoreParameters->xSemaphore != NULL )
+ {
+ /* Create the variable which is to be shared by the first two tasks. */
+ pxFirstSemaphoreParameters->pulSharedVariable = ( unsigned long * ) pvPortMalloc( sizeof( unsigned long ) );
+
+ /* Initialise the share variable to the value the tasks expect. */
+ *( pxFirstSemaphoreParameters->pulSharedVariable ) = semtstNON_BLOCKING_EXPECTED_VALUE;
+
+ /* The first two tasks do not block on semaphore calls. */
+ pxFirstSemaphoreParameters->xBlockTime = ( portTickType ) 0;
+
+ /* Spawn the first two tasks. As they poll they operate at the idle priority. */
+ xTaskCreate( prvSemaphoreTest, ( signed char * ) "PolSEM1", semtstSTACK_SIZE, ( void * ) pxFirstSemaphoreParameters, tskIDLE_PRIORITY, ( xTaskHandle * ) NULL );
+ xTaskCreate( prvSemaphoreTest, ( signed char * ) "PolSEM2", semtstSTACK_SIZE, ( void * ) pxFirstSemaphoreParameters, tskIDLE_PRIORITY, ( xTaskHandle * ) NULL );
+ }
+ }
+
+ /* Do exactly the same to create the second set of tasks, only this time
+ provide a block time for the semaphore calls. */
+ pxSecondSemaphoreParameters = ( xSemaphoreParameters * ) pvPortMalloc( sizeof( xSemaphoreParameters ) );
+ if( pxSecondSemaphoreParameters != NULL )
+ {
+ vSemaphoreCreateBinary( pxSecondSemaphoreParameters->xSemaphore );
+
+ if( pxSecondSemaphoreParameters->xSemaphore != NULL )
+ {
+ pxSecondSemaphoreParameters->pulSharedVariable = ( unsigned long * ) pvPortMalloc( sizeof( unsigned long ) );
+ *( pxSecondSemaphoreParameters->pulSharedVariable ) = semtstBLOCKING_EXPECTED_VALUE;
+ pxSecondSemaphoreParameters->xBlockTime = xBlockTime / portTICK_RATE_MS;
+
+ xTaskCreate( prvSemaphoreTest, ( signed char * ) "BlkSEM1", semtstSTACK_SIZE, ( void * ) pxSecondSemaphoreParameters, uxPriority, ( xTaskHandle * ) NULL );
+ xTaskCreate( prvSemaphoreTest, ( signed char * ) "BlkSEM2", semtstSTACK_SIZE, ( void * ) pxSecondSemaphoreParameters, uxPriority, ( xTaskHandle * ) NULL );
+ }
+ }
+
+ /* vQueueAddToRegistry() adds the semaphore to the registry, if one is
+ in use. The registry is provided as a means for kernel aware
+ debuggers to locate semaphores and has no purpose if a kernel aware debugger
+ is not being used. The call to vQueueAddToRegistry() will be removed
+ by the pre-processor if configQUEUE_REGISTRY_SIZE is not defined or is
+ defined to be less than 1. */
+ vQueueAddToRegistry( ( xQueueHandle ) pxFirstSemaphoreParameters->xSemaphore, ( signed char * ) "Counting_Sem_1" );
+ vQueueAddToRegistry( ( xQueueHandle ) pxSecondSemaphoreParameters->xSemaphore, ( signed char * ) "Counting_Sem_2" );
+}
+/*-----------------------------------------------------------*/
+
+static portTASK_FUNCTION( prvSemaphoreTest, pvParameters )
+{
+xSemaphoreParameters *pxParameters;
+volatile unsigned long *pulSharedVariable, ulExpectedValue;
+unsigned long ulCounter;
+short sError = pdFALSE, sCheckVariableToUse;
+
+ /* See which check variable to use. sNextCheckVariable is not semaphore
+ protected! */
+ portENTER_CRITICAL();
+ sCheckVariableToUse = sNextCheckVariable;
+ sNextCheckVariable++;
+ portEXIT_CRITICAL();
+
+ /* A structure is passed in as the parameter. This contains the shared
+ variable being guarded. */
+ pxParameters = ( xSemaphoreParameters * ) pvParameters;
+ pulSharedVariable = pxParameters->pulSharedVariable;
+
+ /* If we are blocking we use a much higher count to ensure loads of context
+ switches occur during the count. */
+ if( pxParameters->xBlockTime > ( portTickType ) 0 )
+ {
+ ulExpectedValue = semtstBLOCKING_EXPECTED_VALUE;
+ }
+ else
+ {
+ ulExpectedValue = semtstNON_BLOCKING_EXPECTED_VALUE;
+ }
+
+ for( ;; )
+ {
+ /* Try to obtain the semaphore. */
+ if( xSemaphoreTake( pxParameters->xSemaphore, pxParameters->xBlockTime ) == pdPASS )
+ {
+ /* We have the semaphore and so expect any other tasks using the
+ shared variable to have left it in the state we expect to find
+ it. */
+ if( *pulSharedVariable != ulExpectedValue )
+ {
+ sError = pdTRUE;
+ }
+
+ /* Clear the variable, then count it back up to the expected value
+ before releasing the semaphore. Would expect a context switch or
+ two during this time. */
+ for( ulCounter = ( unsigned long ) 0; ulCounter <= ulExpectedValue; ulCounter++ )
+ {
+ *pulSharedVariable = ulCounter;
+ if( *pulSharedVariable != ulCounter )
+ {
+ sError = pdTRUE;
+ }
+ }
+
+ /* Release the semaphore, and if no errors have occurred increment the check
+ variable. */
+ if( xSemaphoreGive( pxParameters->xSemaphore ) == pdFALSE )
+ {
+ sError = pdTRUE;
+ }
+
+ if( sError == pdFALSE )
+ {
+ if( sCheckVariableToUse < semtstNUM_TASKS )
+ {
+ ( sCheckVariables[ sCheckVariableToUse ] )++;
+ }
+ }
+
+ /* If we have a block time then we are running at a priority higher
+ than the idle priority. This task takes a long time to complete
+ a cycle (deliberately so to test the guarding) so will be starving
+ out lower priority tasks. Block for some time to allow give lower
+ priority tasks some processor time. */
+ vTaskDelay( pxParameters->xBlockTime * semtstDELAY_FACTOR );
+ }
+ else
+ {
+ if( pxParameters->xBlockTime == ( portTickType ) 0 )
+ {
+ /* We have not got the semaphore yet, so no point using the
+ processor. We are not blocking when attempting to obtain the
+ semaphore. */
+ taskYIELD();
+ }
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+/* This is called to check that all the created tasks are still running. */
+portBASE_TYPE xAreSemaphoreTasksStillRunning( void )
+{
+static short sLastCheckVariables[ semtstNUM_TASKS ] = { 0 };
+portBASE_TYPE xTask, xReturn = pdTRUE;
+
+ for( xTask = 0; xTask < semtstNUM_TASKS; xTask++ )
+ {
+ if( sLastCheckVariables[ xTask ] == sCheckVariables[ xTask ] )
+ {
+ xReturn = pdFALSE;
+ }
+
+ sLastCheckVariables[ xTask ] = sCheckVariables[ xTask ];
+ }
+
+ return xReturn;
+}
+
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/include/BlockQ.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/include/BlockQ.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,66 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef BLOCK_Q_H
+#define BLOCK_Q_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+void vStartBlockingQueueTasks( unsigned portBASE_TYPE uxPriority );
+portBASE_TYPE xAreBlockingQueuesStillRunning( void );
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/include/GenQTest.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/include/GenQTest.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,67 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef GEN_Q_TEST_H
+#define GEN_Q_TEST_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+void vStartGenericQueueTasks( unsigned portBASE_TYPE uxPriority );
+portBASE_TYPE xAreGenericQueueTasksStillRunning( void );
+#ifdef __cplusplus
+}
+#endif
+#endif /* GEN_Q_TEST_H */
+
+
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/include/PollQ.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/include/PollQ.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,66 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef POLLED_Q_H
+#define POLLED_Q_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+void vStartPolledQueueTasks( unsigned portBASE_TYPE uxPriority );
+portBASE_TYPE xArePollingQueuesStillRunning( void );
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/include/QPeek.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/include/QPeek.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,67 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef Q_PEEK_TEST_H
+#define Q_PEEK_TEST_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+void vStartQueuePeekTasks( void );
+portBASE_TYPE xAreQueuePeekTasksStillRunning( void );
+#ifdef __cplusplus
+}
+#endif
+#endif /* Q_PEEK_TEST_H */
+
+
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/include/blocktim.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/include/blocktim.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,66 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef BLOCK_TIME_TEST_H
+#define BLOCK_TIME_TEST_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+void vCreateBlockTimeTasks( void );
+portBASE_TYPE xAreBlockTimeTestTasksStillRunning( void );
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/include/flash.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/include/flash.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,64 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef FLASH_LED_H
+#define FLASH_LED_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+void vStartLEDFlashTasks( unsigned portBASE_TYPE uxPriority );
+#ifdef __cplusplus
+}
+#endif
+#endif
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/include/integer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/include/integer.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,66 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef INTEGER_TASKS_H
+#define INTEGER_TASKS_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+void vStartIntegerMathTasks( unsigned portBASE_TYPE uxPriority );
+portBASE_TYPE xAreIntegerMathsTaskStillRunning( void );
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/include/partest.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/include/partest.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,100 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+/*
+ * Modified for mbed NXP LPC1768 board
+ * By Kenji Arai / JH1PJL on April 30th,2010
+ * August 28th, 2010
+ */
+
+#ifndef PARTEST_H
+#define PARTEST_H
+
+#define partstDEFAULT_PORT_ADDRESS ( ( unsigned short ) 0x378 )
+
+#if (USE_XPRESSO == 1)
+#define LED_1 ( 1UL << 22UL )
+// Dummy only one LED is available
+#define LED_2 ( 0UL << 0UL )
+#define LED_3 ( 0UL << 0UL )
+#define LED_4 ( 0UL << 0UL )
+#else
+#define LED_1 ( 1UL << 18UL )
+#define LED_2 ( 1UL << 20UL )
+#define LED_3 ( 1UL << 21UL )
+#define LED_4 ( 1UL << 23UL )
+#endif
+
+#define REC_SW ( 1UL )
+
+#define partstFIO1_BITS ( LED_1 | LED_2 | LED_3 | LED_4 )
+#define partstNUM_LEDS ( 4 )
+
+/* LED */
+#define LED1 0
+#define LED2 1
+#define LED3 2
+#define LED4 3
+#ifdef __cplusplus
+extern "C" {
+#endif
+static unsigned long ulLEDs[] = { LED_1, LED_2, LED_3, LED_4 };
+void vParTestInitialise( void );
+void vParTestSetLED( unsigned portBASE_TYPE, signed portBASE_TYPE );
+void vParTestToggleLED( unsigned portBASE_TYPE );
+unsigned int vParTestSW_Rec( void );
+unsigned int vParTestSW_Mode( void );
+#ifdef __cplusplus
+}
+#endif
+#endif
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/include/recmutex.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/include/recmutex.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,65 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef RECURSIVE_MUTEX_TEST_H
+#define RECURSIVE_MUTEX_TEST_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+void vStartRecursiveMutexTasks( void );
+portBASE_TYPE xAreRecursiveMutexTasksStillRunning( void );
+#ifdef __cplusplus
+}
+#endif
+#endif
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Common/include/semtest.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Common/include/semtest.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,65 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef SEMAPHORE_TEST_H
+#define SEMAPHORE_TEST_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+void vStartSemaphoreTasks( unsigned portBASE_TYPE uxPriority );
+portBASE_TYPE xAreSemaphoreTasksStillRunning( void );
+#ifdef __cplusplus
+}
+#endif
+#endif
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/include/FreeRTOS.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/FreeRTOS/Source/include/FreeRTOS.h Sat Jan 01 11:17:45 2011 +0000 @@ -0,0 +1,420 @@ +/* + FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd. + + *************************************************************************** + * * + * If you are: * + * * + * + New to FreeRTOS, * + * + Wanting to learn FreeRTOS or multitasking in general quickly * + * + Looking for basic training, * + * + Wanting to improve your FreeRTOS skills and productivity * + * * + * then take a look at the FreeRTOS eBook * + * * + * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * + * http://www.FreeRTOS.org/Documentation * + * * + * A pdf reference manual is also available. Both are usually delivered * + * to your inbox within 20 minutes to two hours when purchased between 8am * + * and 8pm GMT (although please allow up to 24 hours in case of * + * exceptional circumstances). Thank you for your support! * + * * + *************************************************************************** + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation AND MODIFIED BY the FreeRTOS exception. + ***NOTE*** The exception to the GPL is included to allow you to distribute + a combined work that includes FreeRTOS without being obliged to provide the + source code for proprietary components outside of the FreeRTOS kernel. + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. You should have received a copy of the GNU General Public + License and the FreeRTOS license exception along with FreeRTOS; if not it + can be viewed here: http://www.freertos.org/a00114.html and also obtained + by writing to Richard Barry, contact details for whom are available on the + FreeRTOS WEB site. + + 1 tab == 4 spaces! + + http://www.FreeRTOS.org - Documentation, latest information, license and + contact details. + + http://www.SafeRTOS.com - A version that is certified for use in safety + critical systems. + + http://www.OpenRTOS.com - Commercial support, development, porting, + licensing and training services. +*/ + +#ifndef INC_FREERTOS_H +#define INC_FREERTOS_H + + +/* + * Include the generic headers required for the FreeRTOS port being used. + */ +#include <stddef.h> + +/* Basic FreeRTOS definitions. */ +#include "projdefs.h" + +/* Application specific configuration options. */ +#include "FreeRTOSConfig.h" + +/* Definitions specific to the port being used. */ +#include "portable.h" + + +/* Defines the prototype to which the application task hook function must +conform. */ +typedef portBASE_TYPE (*pdTASK_HOOK_CODE)( void * ); + + + + + +/* + * Check all the required application specific macros have been defined. + * These macros are application specific and (as downloaded) are defined + * within FreeRTOSConfig.h. + */ + +#ifndef configUSE_PREEMPTION + #error Missing definition: configUSE_PREEMPTION should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configUSE_IDLE_HOOK + #error Missing definition: configUSE_IDLE_HOOK should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configUSE_TICK_HOOK + #error Missing definition: configUSE_TICK_HOOK should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configUSE_CO_ROUTINES + #error Missing definition: configUSE_CO_ROUTINES should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef INCLUDE_vTaskPrioritySet + #error Missing definition: INCLUDE_vTaskPrioritySet should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef INCLUDE_uxTaskPriorityGet + #error Missing definition: INCLUDE_uxTaskPriorityGet should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef INCLUDE_vTaskDelete + #error Missing definition: INCLUDE_vTaskDelete should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef INCLUDE_vTaskCleanUpResources + #error Missing definition: INCLUDE_vTaskCleanUpResources should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef INCLUDE_vTaskSuspend + #error Missing definition: INCLUDE_vTaskSuspend should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef INCLUDE_vTaskDelayUntil + #error Missing definition: INCLUDE_vTaskDelayUntil should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef INCLUDE_vTaskDelay + #error Missing definition: INCLUDE_vTaskDelay should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configUSE_16_BIT_TICKS + #error Missing definition: configUSE_16_BIT_TICKS should be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configUSE_APPLICATION_TASK_TAG + #define configUSE_APPLICATION_TASK_TAG 0 +#endif + +#ifndef INCLUDE_uxTaskGetStackHighWaterMark + #define INCLUDE_uxTaskGetStackHighWaterMark 0 +#endif + +#ifndef configUSE_RECURSIVE_MUTEXES + #define configUSE_RECURSIVE_MUTEXES 0 +#endif + +#ifndef configUSE_MUTEXES + #define configUSE_MUTEXES 0 +#endif + +#ifndef configUSE_COUNTING_SEMAPHORES + #define configUSE_COUNTING_SEMAPHORES 0 +#endif + +#ifndef configUSE_ALTERNATIVE_API + #define configUSE_ALTERNATIVE_API 0 +#endif + +#ifndef portCRITICAL_NESTING_IN_TCB + #define portCRITICAL_NESTING_IN_TCB 0 +#endif + +#ifndef configMAX_TASK_NAME_LEN + #define configMAX_TASK_NAME_LEN 16 +#endif + +#ifndef configIDLE_SHOULD_YIELD + #define configIDLE_SHOULD_YIELD 1 +#endif + +#if configMAX_TASK_NAME_LEN < 1 + #undef configMAX_TASK_NAME_LEN + #define configMAX_TASK_NAME_LEN 1 +#endif + +#ifndef INCLUDE_xTaskResumeFromISR + #define INCLUDE_xTaskResumeFromISR 1 +#endif + +#ifndef INCLUDE_xTaskGetSchedulerState + #define INCLUDE_xTaskGetSchedulerState 0 +#endif + +#if ( configUSE_MUTEXES == 1 ) + /* xTaskGetCurrentTaskHandle is used by the priority inheritance mechanism + within the mutex implementation so must be available if mutexes are used. */ + #undef INCLUDE_xTaskGetCurrentTaskHandle + #define INCLUDE_xTaskGetCurrentTaskHandle 1 +#else + #ifndef INCLUDE_xTaskGetCurrentTaskHandle + #define INCLUDE_xTaskGetCurrentTaskHandle 0 + #endif +#endif + + +#ifndef portSET_INTERRUPT_MASK_FROM_ISR + #define portSET_INTERRUPT_MASK_FROM_ISR() 0 +#endif + +#ifndef portCLEAR_INTERRUPT_MASK_FROM_ISR + #define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusValue ) ( void ) uxSavedStatusValue +#endif + + +#ifndef configQUEUE_REGISTRY_SIZE + #define configQUEUE_REGISTRY_SIZE 0 +#endif + +#if configQUEUE_REGISTRY_SIZE < 1 + #define configQUEUE_REGISTRY_SIZE 0 + #define vQueueAddToRegistry( xQueue, pcName ) + #define vQueueUnregisterQueue( xQueue ) +#endif + + +/* Remove any unused trace macros. */ +#ifndef traceSTART + /* Used to perform any necessary initialisation - for example, open a file + into which trace is to be written. */ + #define traceSTART() +#endif + +#ifndef traceEND + /* Use to close a trace, for example close a file into which trace has been + written. */ + #define traceEND() +#endif + +#ifndef traceTASK_SWITCHED_IN + /* Called after a task has been selected to run. pxCurrentTCB holds a pointer + to the task control block of the selected task. */ + #define traceTASK_SWITCHED_IN() +#endif + +#ifndef traceTASK_SWITCHED_OUT + /* Called before a task has been selected to run. pxCurrentTCB holds a pointer + to the task control block of the task being switched out. */ + #define traceTASK_SWITCHED_OUT() +#endif + +#ifndef traceBLOCKING_ON_QUEUE_RECEIVE + /* Task is about to block because it cannot read from a + queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore + upon which the read was attempted. pxCurrentTCB points to the TCB of the + task that attempted the read. */ + #define traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue ) +#endif + +#ifndef traceBLOCKING_ON_QUEUE_SEND + /* Task is about to block because it cannot write to a + queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore + upon which the write was attempted. pxCurrentTCB points to the TCB of the + task that attempted the write. */ + #define traceBLOCKING_ON_QUEUE_SEND( pxQueue ) +#endif + +#ifndef configCHECK_FOR_STACK_OVERFLOW + #define configCHECK_FOR_STACK_OVERFLOW 0 +#endif + +/* The following event macros are embedded in the kernel API calls. */ + +#ifndef traceQUEUE_CREATE + #define traceQUEUE_CREATE( pxNewQueue ) +#endif + +#ifndef traceQUEUE_CREATE_FAILED + #define traceQUEUE_CREATE_FAILED() +#endif + +#ifndef traceCREATE_MUTEX + #define traceCREATE_MUTEX( pxNewQueue ) +#endif + +#ifndef traceCREATE_MUTEX_FAILED + #define traceCREATE_MUTEX_FAILED() +#endif + +#ifndef traceGIVE_MUTEX_RECURSIVE + #define traceGIVE_MUTEX_RECURSIVE( pxMutex ) +#endif + +#ifndef traceGIVE_MUTEX_RECURSIVE_FAILED + #define traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex ) +#endif + +#ifndef traceTAKE_MUTEX_RECURSIVE + #define traceTAKE_MUTEX_RECURSIVE( pxMutex ) +#endif + +#ifndef traceCREATE_COUNTING_SEMAPHORE + #define traceCREATE_COUNTING_SEMAPHORE() +#endif + +#ifndef traceCREATE_COUNTING_SEMAPHORE_FAILED + #define traceCREATE_COUNTING_SEMAPHORE_FAILED() +#endif + +#ifndef traceQUEUE_SEND + #define traceQUEUE_SEND( pxQueue ) +#endif + +#ifndef traceQUEUE_SEND_FAILED + #define traceQUEUE_SEND_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_RECEIVE + #define traceQUEUE_RECEIVE( pxQueue ) +#endif + +#ifndef traceQUEUE_PEEK + #define traceQUEUE_PEEK( pxQueue ) +#endif + +#ifndef traceQUEUE_RECEIVE_FAILED + #define traceQUEUE_RECEIVE_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_SEND_FROM_ISR + #define traceQUEUE_SEND_FROM_ISR( pxQueue ) +#endif + +#ifndef traceQUEUE_SEND_FROM_ISR_FAILED + #define traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_RECEIVE_FROM_ISR + #define traceQUEUE_RECEIVE_FROM_ISR( pxQueue ) +#endif + +#ifndef traceQUEUE_RECEIVE_FROM_ISR_FAILED + #define traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_DELETE + #define traceQUEUE_DELETE( pxQueue ) +#endif + +#ifndef traceTASK_CREATE + #define traceTASK_CREATE( pxNewTCB ) +#endif + +#ifndef traceTASK_CREATE_FAILED + #define traceTASK_CREATE_FAILED( pxNewTCB ) +#endif + +#ifndef traceTASK_DELETE + #define traceTASK_DELETE( pxTaskToDelete ) +#endif + +#ifndef traceTASK_DELAY_UNTIL + #define traceTASK_DELAY_UNTIL() +#endif + +#ifndef traceTASK_DELAY + #define traceTASK_DELAY() +#endif + +#ifndef traceTASK_PRIORITY_SET + #define traceTASK_PRIORITY_SET( pxTask, uxNewPriority ) +#endif + +#ifndef traceTASK_SUSPEND + #define traceTASK_SUSPEND( pxTaskToSuspend ) +#endif + +#ifndef traceTASK_RESUME + #define traceTASK_RESUME( pxTaskToResume ) +#endif + +#ifndef traceTASK_RESUME_FROM_ISR + #define traceTASK_RESUME_FROM_ISR( pxTaskToResume ) +#endif + +#ifndef traceTASK_INCREMENT_TICK + #define traceTASK_INCREMENT_TICK( xTickCount ) +#endif + +#ifndef configGENERATE_RUN_TIME_STATS + #define configGENERATE_RUN_TIME_STATS 0 +#endif + +#if ( configGENERATE_RUN_TIME_STATS == 1 ) + + #ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS + #error If configGENERATE_RUN_TIME_STATS is defined then portCONFIGURE_TIMER_FOR_RUN_TIME_STATS must also be defined. portCONFIGURE_TIMER_FOR_RUN_TIME_STATS should call a port layer function to setup a peripheral timer/counter that can then be used as the run time counter time base. + #endif /* portCONFIGURE_TIMER_FOR_RUN_TIME_STATS */ + + #ifndef portGET_RUN_TIME_COUNTER_VALUE + #error If configGENERATE_RUN_TIME_STATS is defined then portGET_RUN_TIME_COUNTER_VALUE must also be defined. portGET_RUN_TIME_COUNTER_VALUE should evaluate to the counter value of the timer/counter peripheral used as the run time counter time base. + #endif /* portGET_RUN_TIME_COUNTER_VALUE */ + +#endif /* configGENERATE_RUN_TIME_STATS */ + +#ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS + #define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() +#endif + +#ifndef configUSE_MALLOC_FAILED_HOOK + #define configUSE_MALLOC_FAILED_HOOK 0 +#endif + +#ifndef portPRIVILEGE_BIT + #define portPRIVILEGE_BIT ( ( unsigned portBASE_TYPE ) 0x00 ) +#endif + +#ifndef portYIELD_WITHIN_API + #define portYIELD_WITHIN_API portYIELD +#endif + +#ifndef pvPortMallocAligned + #define pvPortMallocAligned( x, puxStackBuffer ) ( ( puxStackBuffer == NULL ) ? ( pvPortMalloc( x ) ) : ( puxStackBuffer ) ) +#endif + +#ifndef vPortFreeAligned + #define vPortFreeAligned( pvBlockToFree ) vPortFree( pvBlockToFree ) +#endif + +#endif /* INC_FREERTOS_H */ +
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/include/StackMacros.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/include/StackMacros.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,172 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef STACK_MACROS_H
+#define STACK_MACROS_H
+
+/*
+ * Call the stack overflow hook function if the stack of the task being swapped
+ * out is currently overflowed, or looks like it might have overflowed in the
+ * past.
+ *
+ * Setting configCHECK_FOR_STACK_OVERFLOW to 1 will cause the macro to check
+ * the current stack state only - comparing the current top of stack value to
+ * the stack limit. Setting configCHECK_FOR_STACK_OVERFLOW to greater than 1
+ * will also cause the last few stack bytes to be checked to ensure the value
+ * to which the bytes were set when the task was created have not been
+ * overwritten. Note this second test does not guarantee that an overflowed
+ * stack will always be recognised.
+ */
+
+/*-----------------------------------------------------------*/
+
+#if( configCHECK_FOR_STACK_OVERFLOW == 0 )
+
+ /* FreeRTOSConfig.h is not set to check for stack overflows. */
+ #define taskFIRST_CHECK_FOR_STACK_OVERFLOW()
+ #define taskSECOND_CHECK_FOR_STACK_OVERFLOW()
+
+#endif /* configCHECK_FOR_STACK_OVERFLOW == 0 */
+/*-----------------------------------------------------------*/
+
+#if( configCHECK_FOR_STACK_OVERFLOW == 1 )
+
+ /* FreeRTOSConfig.h is only set to use the first method of
+ overflow checking. */
+ #define taskSECOND_CHECK_FOR_STACK_OVERFLOW()
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 0 ) && ( portSTACK_GROWTH < 0 ) )
+ /* Only the current stack state is to be checked. */
+ // Modified by Kenji Arai / JH1PJL, October 31st,2010
+ #define taskFIRST_CHECK_FOR_STACK_OVERFLOW() \
+ { \
+ extern void vApplicationStackOverflowHook( xTaskHandle *pxTask, signed char *pcTaskName ); \
+ \
+ /* Is the currently saved stack pointer within the stack limit? */ \
+ if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack ) \
+ { \
+ vApplicationStackOverflowHook( ( xTaskHandle *) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
+ } \
+ }
+#endif /* configCHECK_FOR_STACK_OVERFLOW > 0 */
+/*-----------------------------------------------------------*/
+
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 0 ) && ( portSTACK_GROWTH > 0 ) )
+ // Modified by Kenji Arai / JH1PJL, October 31st,2010
+ /* Only the current stack state is to be checked. */
+ #define taskFIRST_CHECK_FOR_STACK_OVERFLOW() \
+ { \
+ extern void vApplicationStackOverflowHook( xTaskHandle *pxTask, signed char *pcTaskName ); \
+ \
+ /* Is the currently saved stack pointer within the stack limit? */ \
+ if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack ) \
+ { \
+ vApplicationStackOverflowHook( ( xTaskHandle *) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
+ } \
+ }
+
+#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */
+/*-----------------------------------------------------------*/
+
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH < 0 ) )
+ // Modified by Kenji Arai / JH1PJL, October 31st,2010
+ #define taskSECOND_CHECK_FOR_STACK_OVERFLOW() \
+ { \
+ extern void vApplicationStackOverflowHook( xTaskHandle *pxTask, signed char *pcTaskName ); \
+ static const unsigned char ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \
+ \
+ \
+ /* Has the extremity of the task stack ever been written over? */ \
+ if( memcmp( ( void * ) pxCurrentTCB->pxStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \
+ { \
+ vApplicationStackOverflowHook( ( xTaskHandle *) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
+ } \
+ }
+
+#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
+/*-----------------------------------------------------------*/
+
+#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH > 0 ) )
+ // Modified by Kenji Arai / JH1PJL, October 31st,2010
+ #define taskSECOND_CHECK_FOR_STACK_OVERFLOW() \
+ { \
+ extern void vApplicationStackOverflowHook( xTaskHandle *pxTask, signed char *pcTaskName ); \
+ char *pcEndOfStack = ( char * ) pxCurrentTCB->pxEndOfStack; \
+ static const unsigned char ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \
+ tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \
+ \
+ \
+ pcEndOfStack -= sizeof( ucExpectedStackBytes ); \
+ \
+ /* Has the extremity of the task stack ever been written over? */ \
+ if( memcmp( ( void * ) pcEndOfStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \
+ { \
+ vApplicationStackOverflowHook( ( xTaskHandle *) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \
+ } \
+ }
+
+#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */
+/*-----------------------------------------------------------*/
+
+#endif /* STACK_MACROS_H */
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/include/croutine.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/include/croutine.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,749 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef INC_FREERTOS_H
+ #error "#include FreeRTOS.h" must appear in source files before "#include croutine.h"
+#endif
+
+
+
+
+#ifndef CO_ROUTINE_H
+#define CO_ROUTINE_H
+
+#include "list.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Used to hide the implementation of the co-routine control block. The
+control block structure however has to be included in the header due to
+the macro implementation of the co-routine functionality. */
+typedef void * xCoRoutineHandle;
+
+/* Defines the prototype to which co-routine functions must conform. */
+typedef void (*crCOROUTINE_CODE)( xCoRoutineHandle, unsigned portBASE_TYPE );
+
+typedef struct corCoRoutineControlBlock
+{
+ crCOROUTINE_CODE pxCoRoutineFunction;
+ xListItem xGenericListItem; /*< List item used to place the CRCB in ready and blocked queues. */
+ xListItem xEventListItem; /*< List item used to place the CRCB in event lists. */
+ unsigned portBASE_TYPE uxPriority; /*< The priority of the co-routine in relation to other co-routines. */
+ unsigned portBASE_TYPE uxIndex; /*< Used to distinguish between co-routines when multiple co-routines use the same co-routine function. */
+ unsigned short uxState; /*< Used internally by the co-routine implementation. */
+} corCRCB; /* Co-routine control block. Note must be identical in size down to uxPriority with tskTCB. */
+
+/**
+ * croutine. h
+ *<pre>
+ portBASE_TYPE xCoRoutineCreate(
+ crCOROUTINE_CODE pxCoRoutineCode,
+ unsigned portBASE_TYPE uxPriority,
+ unsigned portBASE_TYPE uxIndex
+ );</pre>
+ *
+ * Create a new co-routine and add it to the list of co-routines that are
+ * ready to run.
+ *
+ * @param pxCoRoutineCode Pointer to the co-routine function. Co-routine
+ * functions require special syntax - see the co-routine section of the WEB
+ * documentation for more information.
+ *
+ * @param uxPriority The priority with respect to other co-routines at which
+ * the co-routine will run.
+ *
+ * @param uxIndex Used to distinguish between different co-routines that
+ * execute the same function. See the example below and the co-routine section
+ * of the WEB documentation for further information.
+ *
+ * @return pdPASS if the co-routine was successfully created and added to a ready
+ * list, otherwise an error code defined with ProjDefs.h.
+ *
+ * Example usage:
+ <pre>
+ // Co-routine to be created.
+ void vFlashCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ // This may not be necessary for const variables.
+ static const char cLedToFlash[ 2 ] = { 5, 6 };
+ static const portTickType xTimeToDelay[ 2 ] = { 200, 400 };
+
+ // Must start every co-routine with a call to crSTART();
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // This co-routine just delays for a fixed period, then toggles
+ // an LED. Two co-routines are created using this function, so
+ // the uxIndex parameter is used to tell the co-routine which
+ // LED to flash and how long to delay. This assumes xQueue has
+ // already been created.
+ vParTestToggleLED( cLedToFlash[ uxIndex ] );
+ crDELAY( xHandle, uxFlashRates[ uxIndex ] );
+ }
+
+ // Must end every co-routine with a call to crEND();
+ crEND();
+ }
+
+ // Function that creates two co-routines.
+ void vOtherFunction( void )
+ {
+ unsigned char ucParameterToPass;
+ xTaskHandle xHandle;
+
+ // Create two co-routines at priority 0. The first is given index 0
+ // so (from the code above) toggles LED 5 every 200 ticks. The second
+ // is given index 1 so toggles LED 6 every 400 ticks.
+ for( uxIndex = 0; uxIndex < 2; uxIndex++ )
+ {
+ xCoRoutineCreate( vFlashCoRoutine, 0, uxIndex );
+ }
+ }
+ </pre>
+ * \defgroup xCoRoutineCreate xCoRoutineCreate
+ * \ingroup Tasks
+ */
+signed portBASE_TYPE xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode, unsigned portBASE_TYPE uxPriority, unsigned portBASE_TYPE uxIndex );
+
+
+/**
+ * croutine. h
+ *<pre>
+ void vCoRoutineSchedule( void );</pre>
+ *
+ * Run a co-routine.
+ *
+ * vCoRoutineSchedule() executes the highest priority co-routine that is able
+ * to run. The co-routine will execute until it either blocks, yields or is
+ * preempted by a task. Co-routines execute cooperatively so one
+ * co-routine cannot be preempted by another, but can be preempted by a task.
+ *
+ * If an application comprises of both tasks and co-routines then
+ * vCoRoutineSchedule should be called from the idle task (in an idle task
+ * hook).
+ *
+ * Example usage:
+ <pre>
+ // This idle task hook will schedule a co-routine each time it is called.
+ // The rest of the idle task will execute between co-routine calls.
+ void vApplicationIdleHook( void )
+ {
+ vCoRoutineSchedule();
+ }
+
+ // Alternatively, if you do not require any other part of the idle task to
+ // execute, the idle task hook can call vCoRoutineScheduler() within an
+ // infinite loop.
+ void vApplicationIdleHook( void )
+ {
+ for( ;; )
+ {
+ vCoRoutineSchedule();
+ }
+ }
+ </pre>
+ * \defgroup vCoRoutineSchedule vCoRoutineSchedule
+ * \ingroup Tasks
+ */
+void vCoRoutineSchedule( void );
+
+/**
+ * croutine. h
+ * <pre>
+ crSTART( xCoRoutineHandle xHandle );</pre>
+ *
+ * This macro MUST always be called at the start of a co-routine function.
+ *
+ * Example usage:
+ <pre>
+ // Co-routine to be created.
+ void vACoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static long ulAVariable;
+
+ // Must start every co-routine with a call to crSTART();
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // Co-routine functionality goes here.
+ }
+
+ // Must end every co-routine with a call to crEND();
+ crEND();
+ }</pre>
+ * \defgroup crSTART crSTART
+ * \ingroup Tasks
+ */
+#define crSTART( pxCRCB ) switch( ( ( corCRCB * )pxCRCB )->uxState ) { case 0:
+
+/**
+ * croutine. h
+ * <pre>
+ crEND();</pre>
+ *
+ * This macro MUST always be called at the end of a co-routine function.
+ *
+ * Example usage:
+ <pre>
+ // Co-routine to be created.
+ void vACoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static long ulAVariable;
+
+ // Must start every co-routine with a call to crSTART();
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // Co-routine functionality goes here.
+ }
+
+ // Must end every co-routine with a call to crEND();
+ crEND();
+ }</pre>
+ * \defgroup crSTART crSTART
+ * \ingroup Tasks
+ */
+#define crEND() }
+
+/*
+ * These macros are intended for internal use by the co-routine implementation
+ * only. The macros should not be used directly by application writers.
+ */
+#define crSET_STATE0( xHandle ) ( ( corCRCB * )xHandle)->uxState = (__LINE__ * 2); return; case (__LINE__ * 2):
+#define crSET_STATE1( xHandle ) ( ( corCRCB * )xHandle)->uxState = ((__LINE__ * 2)+1); return; case ((__LINE__ * 2)+1):
+
+/**
+ * croutine. h
+ *<pre>
+ crDELAY( xCoRoutineHandle xHandle, portTickType xTicksToDelay );</pre>
+ *
+ * Delay a co-routine for a fixed period of time.
+ *
+ * crDELAY can only be called from the co-routine function itself - not
+ * from within a function called by the co-routine function. This is because
+ * co-routines do not maintain their own stack.
+ *
+ * @param xHandle The handle of the co-routine to delay. This is the xHandle
+ * parameter of the co-routine function.
+ *
+ * @param xTickToDelay The number of ticks that the co-routine should delay
+ * for. The actual amount of time this equates to is defined by
+ * configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant portTICK_RATE_MS
+ * can be used to convert ticks to milliseconds.
+ *
+ * Example usage:
+ <pre>
+ // Co-routine to be created.
+ void vACoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ // This may not be necessary for const variables.
+ // We are to delay for 200ms.
+ static const xTickType xDelayTime = 200 / portTICK_RATE_MS;
+
+ // Must start every co-routine with a call to crSTART();
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // Delay for 200ms.
+ crDELAY( xHandle, xDelayTime );
+
+ // Do something here.
+ }
+
+ // Must end every co-routine with a call to crEND();
+ crEND();
+ }</pre>
+ * \defgroup crDELAY crDELAY
+ * \ingroup Tasks
+ */
+#define crDELAY( xHandle, xTicksToDelay ) \
+ if( xTicksToDelay > 0 ) \
+ { \
+ vCoRoutineAddToDelayedList( xTicksToDelay, NULL ); \
+ } \
+ crSET_STATE0( xHandle );
+
+/**
+ * <pre>
+ crQUEUE_SEND(
+ xCoRoutineHandle xHandle,
+ xQueueHandle pxQueue,
+ void *pvItemToQueue,
+ portTickType xTicksToWait,
+ portBASE_TYPE *pxResult
+ )</pre>
+ *
+ * The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine
+ * equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.
+ *
+ * crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas
+ * xQueueSend() and xQueueReceive() can only be used from tasks.
+ *
+ * crQUEUE_SEND can only be called from the co-routine function itself - not
+ * from within a function called by the co-routine function. This is because
+ * co-routines do not maintain their own stack.
+ *
+ * See the co-routine section of the WEB documentation for information on
+ * passing data between tasks and co-routines and between ISR's and
+ * co-routines.
+ *
+ * @param xHandle The handle of the calling co-routine. This is the xHandle
+ * parameter of the co-routine function.
+ *
+ * @param pxQueue The handle of the queue on which the data will be posted.
+ * The handle is obtained as the return value when the queue is created using
+ * the xQueueCreate() API function.
+ *
+ * @param pvItemToQueue A pointer to the data being posted onto the queue.
+ * The number of bytes of each queued item is specified when the queue is
+ * created. This number of bytes is copied from pvItemToQueue into the queue
+ * itself.
+ *
+ * @param xTickToDelay The number of ticks that the co-routine should block
+ * to wait for space to become available on the queue, should space not be
+ * available immediately. The actual amount of time this equates to is defined
+ * by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant
+ * portTICK_RATE_MS can be used to convert ticks to milliseconds (see example
+ * below).
+ *
+ * @param pxResult The variable pointed to by pxResult will be set to pdPASS if
+ * data was successfully posted onto the queue, otherwise it will be set to an
+ * error defined within ProjDefs.h.
+ *
+ * Example usage:
+ <pre>
+ // Co-routine function that blocks for a fixed period then posts a number onto
+ // a queue.
+ static void prvCoRoutineFlashTask( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static portBASE_TYPE xNumberToPost = 0;
+ static portBASE_TYPE xResult;
+
+ // Co-routines must begin with a call to crSTART().
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // This assumes the queue has already been created.
+ crQUEUE_SEND( xHandle, xCoRoutineQueue, &xNumberToPost, NO_DELAY, &xResult );
+
+ if( xResult != pdPASS )
+ {
+ // The message was not posted!
+ }
+
+ // Increment the number to be posted onto the queue.
+ xNumberToPost++;
+
+ // Delay for 100 ticks.
+ crDELAY( xHandle, 100 );
+ }
+
+ // Co-routines must end with a call to crEND().
+ crEND();
+ }</pre>
+ * \defgroup crQUEUE_SEND crQUEUE_SEND
+ * \ingroup Tasks
+ */
+#define crQUEUE_SEND( xHandle, pxQueue, pvItemToQueue, xTicksToWait, pxResult ) \
+{ \
+ *pxResult = xQueueCRSend( pxQueue, pvItemToQueue, xTicksToWait ); \
+ if( *pxResult == errQUEUE_BLOCKED ) \
+ { \
+ crSET_STATE0( xHandle ); \
+ *pxResult = xQueueCRSend( pxQueue, pvItemToQueue, 0 ); \
+ } \
+ if( *pxResult == errQUEUE_YIELD ) \
+ { \
+ crSET_STATE1( xHandle ); \
+ *pxResult = pdPASS; \
+ } \
+}
+
+/**
+ * croutine. h
+ * <pre>
+ crQUEUE_RECEIVE(
+ xCoRoutineHandle xHandle,
+ xQueueHandle pxQueue,
+ void *pvBuffer,
+ portTickType xTicksToWait,
+ portBASE_TYPE *pxResult
+ )</pre>
+ *
+ * The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine
+ * equivalent to the xQueueSend() and xQueueReceive() functions used by tasks.
+ *
+ * crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas
+ * xQueueSend() and xQueueReceive() can only be used from tasks.
+ *
+ * crQUEUE_RECEIVE can only be called from the co-routine function itself - not
+ * from within a function called by the co-routine function. This is because
+ * co-routines do not maintain their own stack.
+ *
+ * See the co-routine section of the WEB documentation for information on
+ * passing data between tasks and co-routines and between ISR's and
+ * co-routines.
+ *
+ * @param xHandle The handle of the calling co-routine. This is the xHandle
+ * parameter of the co-routine function.
+ *
+ * @param pxQueue The handle of the queue from which the data will be received.
+ * The handle is obtained as the return value when the queue is created using
+ * the xQueueCreate() API function.
+ *
+ * @param pvBuffer The buffer into which the received item is to be copied.
+ * The number of bytes of each queued item is specified when the queue is
+ * created. This number of bytes is copied into pvBuffer.
+ *
+ * @param xTickToDelay The number of ticks that the co-routine should block
+ * to wait for data to become available from the queue, should data not be
+ * available immediately. The actual amount of time this equates to is defined
+ * by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant
+ * portTICK_RATE_MS can be used to convert ticks to milliseconds (see the
+ * crQUEUE_SEND example).
+ *
+ * @param pxResult The variable pointed to by pxResult will be set to pdPASS if
+ * data was successfully retrieved from the queue, otherwise it will be set to
+ * an error code as defined within ProjDefs.h.
+ *
+ * Example usage:
+ <pre>
+ // A co-routine receives the number of an LED to flash from a queue. It
+ // blocks on the queue until the number is received.
+ static void prvCoRoutineFlashWorkTask( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static portBASE_TYPE xResult;
+ static unsigned portBASE_TYPE uxLEDToFlash;
+
+ // All co-routines must start with a call to crSTART().
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // Wait for data to become available on the queue.
+ crQUEUE_RECEIVE( xHandle, xCoRoutineQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
+
+ if( xResult == pdPASS )
+ {
+ // We received the LED to flash - flash it!
+ vParTestToggleLED( uxLEDToFlash );
+ }
+ }
+
+ crEND();
+ }</pre>
+ * \defgroup crQUEUE_RECEIVE crQUEUE_RECEIVE
+ * \ingroup Tasks
+ */
+#define crQUEUE_RECEIVE( xHandle, pxQueue, pvBuffer, xTicksToWait, pxResult ) \
+{ \
+ *pxResult = xQueueCRReceive( pxQueue, pvBuffer, xTicksToWait ); \
+ if( *pxResult == errQUEUE_BLOCKED ) \
+ { \
+ crSET_STATE0( xHandle ); \
+ *pxResult = xQueueCRReceive( pxQueue, pvBuffer, 0 ); \
+ } \
+ if( *pxResult == errQUEUE_YIELD ) \
+ { \
+ crSET_STATE1( xHandle ); \
+ *pxResult = pdPASS; \
+ } \
+}
+
+/**
+ * croutine. h
+ * <pre>
+ crQUEUE_SEND_FROM_ISR(
+ xQueueHandle pxQueue,
+ void *pvItemToQueue,
+ portBASE_TYPE xCoRoutinePreviouslyWoken
+ )</pre>
+ *
+ * The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the
+ * co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()
+ * functions used by tasks.
+ *
+ * crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to
+ * pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and
+ * xQueueReceiveFromISR() can only be used to pass data between a task and and
+ * ISR.
+ *
+ * crQUEUE_SEND_FROM_ISR can only be called from an ISR to send data to a queue
+ * that is being used from within a co-routine.
+ *
+ * See the co-routine section of the WEB documentation for information on
+ * passing data between tasks and co-routines and between ISR's and
+ * co-routines.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xCoRoutinePreviouslyWoken This is included so an ISR can post onto
+ * the same queue multiple times from a single interrupt. The first call
+ * should always pass in pdFALSE. Subsequent calls should pass in
+ * the value returned from the previous call.
+ *
+ * @return pdTRUE if a co-routine was woken by posting onto the queue. This is
+ * used by the ISR to determine if a context switch may be required following
+ * the ISR.
+ *
+ * Example usage:
+ <pre>
+ // A co-routine that blocks on a queue waiting for characters to be received.
+ static void vReceivingCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )
+ {
+ char cRxedChar;
+ portBASE_TYPE xResult;
+
+ // All co-routines must start with a call to crSTART().
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // Wait for data to become available on the queue. This assumes the
+ // queue xCommsRxQueue has already been created!
+ crQUEUE_RECEIVE( xHandle, xCommsRxQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
+
+ // Was a character received?
+ if( xResult == pdPASS )
+ {
+ // Process the character here.
+ }
+ }
+
+ // All co-routines must end with a call to crEND().
+ crEND();
+ }
+
+ // An ISR that uses a queue to send characters received on a serial port to
+ // a co-routine.
+ void vUART_ISR( void )
+ {
+ char cRxedChar;
+ portBASE_TYPE xCRWokenByPost = pdFALSE;
+
+ // We loop around reading characters until there are none left in the UART.
+ while( UART_RX_REG_NOT_EMPTY() )
+ {
+ // Obtain the character from the UART.
+ cRxedChar = UART_RX_REG;
+
+ // Post the character onto a queue. xCRWokenByPost will be pdFALSE
+ // the first time around the loop. If the post causes a co-routine
+ // to be woken (unblocked) then xCRWokenByPost will be set to pdTRUE.
+ // In this manner we can ensure that if more than one co-routine is
+ // blocked on the queue only one is woken by this ISR no matter how
+ // many characters are posted to the queue.
+ xCRWokenByPost = crQUEUE_SEND_FROM_ISR( xCommsRxQueue, &cRxedChar, xCRWokenByPost );
+ }
+ }</pre>
+ * \defgroup crQUEUE_SEND_FROM_ISR crQUEUE_SEND_FROM_ISR
+ * \ingroup Tasks
+ */
+#define crQUEUE_SEND_FROM_ISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken ) xQueueCRSendFromISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken )
+
+
+/**
+ * croutine. h
+ * <pre>
+ crQUEUE_SEND_FROM_ISR(
+ xQueueHandle pxQueue,
+ void *pvBuffer,
+ portBASE_TYPE * pxCoRoutineWoken
+ )</pre>
+ *
+ * The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the
+ * co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR()
+ * functions used by tasks.
+ *
+ * crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to
+ * pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and
+ * xQueueReceiveFromISR() can only be used to pass data between a task and and
+ * ISR.
+ *
+ * crQUEUE_RECEIVE_FROM_ISR can only be called from an ISR to receive data
+ * from a queue that is being used from within a co-routine (a co-routine
+ * posted to the queue).
+ *
+ * See the co-routine section of the WEB documentation for information on
+ * passing data between tasks and co-routines and between ISR's and
+ * co-routines.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvBuffer A pointer to a buffer into which the received item will be
+ * placed. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from the queue into
+ * pvBuffer.
+ *
+ * @param pxCoRoutineWoken A co-routine may be blocked waiting for space to become
+ * available on the queue. If crQUEUE_RECEIVE_FROM_ISR causes such a
+ * co-routine to unblock *pxCoRoutineWoken will get set to pdTRUE, otherwise
+ * *pxCoRoutineWoken will remain unchanged.
+ *
+ * @return pdTRUE an item was successfully received from the queue, otherwise
+ * pdFALSE.
+ *
+ * Example usage:
+ <pre>
+ // A co-routine that posts a character to a queue then blocks for a fixed
+ // period. The character is incremented each time.
+ static void vSendingCoRoutine( xCoRoutineHandle xHandle, unsigned portBASE_TYPE uxIndex )
+ {
+ // cChar holds its value while this co-routine is blocked and must therefore
+ // be declared static.
+ static char cCharToTx = 'a';
+ portBASE_TYPE xResult;
+
+ // All co-routines must start with a call to crSTART().
+ crSTART( xHandle );
+
+ for( ;; )
+ {
+ // Send the next character to the queue.
+ crQUEUE_SEND( xHandle, xCoRoutineQueue, &cCharToTx, NO_DELAY, &xResult );
+
+ if( xResult == pdPASS )
+ {
+ // The character was successfully posted to the queue.
+ }
+ else
+ {
+ // Could not post the character to the queue.
+ }
+
+ // Enable the UART Tx interrupt to cause an interrupt in this
+ // hypothetical UART. The interrupt will obtain the character
+ // from the queue and send it.
+ ENABLE_RX_INTERRUPT();
+
+ // Increment to the next character then block for a fixed period.
+ // cCharToTx will maintain its value across the delay as it is
+ // declared static.
+ cCharToTx++;
+ if( cCharToTx > 'x' )
+ {
+ cCharToTx = 'a';
+ }
+ crDELAY( 100 );
+ }
+
+ // All co-routines must end with a call to crEND().
+ crEND();
+ }
+
+ // An ISR that uses a queue to receive characters to send on a UART.
+ void vUART_ISR( void )
+ {
+ char cCharToTx;
+ portBASE_TYPE xCRWokenByPost = pdFALSE;
+
+ while( UART_TX_REG_EMPTY() )
+ {
+ // Are there any characters in the queue waiting to be sent?
+ // xCRWokenByPost will automatically be set to pdTRUE if a co-routine
+ // is woken by the post - ensuring that only a single co-routine is
+ // woken no matter how many times we go around this loop.
+ if( crQUEUE_RECEIVE_FROM_ISR( pxQueue, &cCharToTx, &xCRWokenByPost ) )
+ {
+ SEND_CHARACTER( cCharToTx );
+ }
+ }
+ }</pre>
+ * \defgroup crQUEUE_RECEIVE_FROM_ISR crQUEUE_RECEIVE_FROM_ISR
+ * \ingroup Tasks
+ */
+#define crQUEUE_RECEIVE_FROM_ISR( pxQueue, pvBuffer, pxCoRoutineWoken ) xQueueCRReceiveFromISR( pxQueue, pvBuffer, pxCoRoutineWoken )
+
+/*
+ * This function is intended for internal use by the co-routine macros only.
+ * The macro nature of the co-routine implementation requires that the
+ * prototype appears here. The function should not be used by application
+ * writers.
+ *
+ * Removes the current co-routine from its ready list and places it in the
+ * appropriate delayed list.
+ */
+void vCoRoutineAddToDelayedList( portTickType xTicksToDelay, xList *pxEventList );
+
+/*
+ * This function is intended for internal use by the queue implementation only.
+ * The function should not be used by application writers.
+ *
+ * Removes the highest priority co-routine from the event list and places it in
+ * the pending ready list.
+ */
+signed portBASE_TYPE xCoRoutineRemoveFromEventList( const xList *pxEventList );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CO_ROUTINE_H */
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/include/list.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/include/list.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,305 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/*
+ * This is the list implementation used by the scheduler. While it is tailored
+ * heavily for the schedulers needs, it is also available for use by
+ * application code.
+ *
+ * xLists can only store pointers to xListItems. Each xListItem contains a
+ * numeric value (xItemValue). Most of the time the lists are sorted in
+ * descending item value order.
+ *
+ * Lists are created already containing one list item. The value of this
+ * item is the maximum possible that can be stored, it is therefore always at
+ * the end of the list and acts as a marker. The list member pxHead always
+ * points to this marker - even though it is at the tail of the list. This
+ * is because the tail contains a wrap back pointer to the true head of
+ * the list.
+ *
+ * In addition to it's value, each list item contains a pointer to the next
+ * item in the list (pxNext), a pointer to the list it is in (pxContainer)
+ * and a pointer to back to the object that contains it. These later two
+ * pointers are included for efficiency of list manipulation. There is
+ * effectively a two way link between the object containing the list item and
+ * the list item itself.
+ *
+ *
+ * \page ListIntroduction List Implementation
+ * \ingroup FreeRTOSIntro
+ */
+
+/*
+ Changes from V4.3.1
+
+ + Included local const within listGET_OWNER_OF_NEXT_ENTRY() to assist
+ compiler with optimisation. Thanks B.R.
+*/
+
+#ifndef LIST_H
+#define LIST_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+/*
+ * Definition of the only type of object that a list can contain.
+ */
+struct xLIST_ITEM
+{
+ portTickType xItemValue; /*< The value being listed. In most cases this is used to sort the list in descending order. */
+ volatile struct xLIST_ITEM * pxNext; /*< Pointer to the next xListItem in the list. */
+ volatile struct xLIST_ITEM * pxPrevious;/*< Pointer to the previous xListItem in the list. */
+ void * pvOwner; /*< Pointer to the object (normally a TCB) that contains the list item. There is therefore a two way link between the object containing the list item and the list item itself. */
+ void * pvContainer; /*< Pointer to the list in which this list item is placed (if any). */
+};
+typedef struct xLIST_ITEM xListItem; /* For some reason lint wants this as two separate definitions. */
+
+struct xMINI_LIST_ITEM
+{
+ portTickType xItemValue;
+ volatile struct xLIST_ITEM *pxNext;
+ volatile struct xLIST_ITEM *pxPrevious;
+};
+typedef struct xMINI_LIST_ITEM xMiniListItem;
+
+/*
+ * Definition of the type of queue used by the scheduler.
+ */
+typedef struct xLIST
+{
+ volatile unsigned portBASE_TYPE uxNumberOfItems;
+ volatile xListItem * pxIndex; /*< Used to walk through the list. Points to the last item returned by a call to pvListGetOwnerOfNextEntry (). */
+ volatile xMiniListItem xListEnd; /*< List item that contains the maximum possible item value meaning it is always at the end of the list and is therefore used as a marker. */
+} xList;
+
+/*
+ * Access macro to set the owner of a list item. The owner of a list item
+ * is the object (usually a TCB) that contains the list item.
+ *
+ * \page listSET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER
+ * \ingroup LinkedList
+ */
+#define listSET_LIST_ITEM_OWNER( pxListItem, pxOwner ) ( pxListItem )->pvOwner = ( void * ) pxOwner
+
+/*
+ * Access macro to set the value of the list item. In most cases the value is
+ * used to sort the list in descending order.
+ *
+ * \page listSET_LIST_ITEM_VALUE listSET_LIST_ITEM_VALUE
+ * \ingroup LinkedList
+ */
+#define listSET_LIST_ITEM_VALUE( pxListItem, xValue ) ( pxListItem )->xItemValue = xValue
+
+/*
+ * Access macro the retrieve the value of the list item. The value can
+ * represent anything - for example a the priority of a task, or the time at
+ * which a task should be unblocked.
+ *
+ * \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE
+ * \ingroup LinkedList
+ */
+#define listGET_LIST_ITEM_VALUE( pxListItem ) ( ( pxListItem )->xItemValue )
+
+/*
+ * Access macro to determine if a list contains any items. The macro will
+ * only have the value true if the list is empty.
+ *
+ * \page listLIST_IS_EMPTY listLIST_IS_EMPTY
+ * \ingroup LinkedList
+ */
+#define listLIST_IS_EMPTY( pxList ) ( ( pxList )->uxNumberOfItems == ( unsigned portBASE_TYPE ) 0 )
+
+/*
+ * Access macro to return the number of items in the list.
+ */
+#define listCURRENT_LIST_LENGTH( pxList ) ( ( pxList )->uxNumberOfItems )
+
+/*
+ * Access function to obtain the owner of the next entry in a list.
+ *
+ * The list member pxIndex is used to walk through a list. Calling
+ * listGET_OWNER_OF_NEXT_ENTRY increments pxIndex to the next item in the list
+ * and returns that entries pxOwner parameter. Using multiple calls to this
+ * function it is therefore possible to move through every item contained in
+ * a list.
+ *
+ * The pxOwner parameter of a list item is a pointer to the object that owns
+ * the list item. In the scheduler this is normally a task control block.
+ * The pxOwner parameter effectively creates a two way link between the list
+ * item and its owner.
+ *
+ * @param pxList The list from which the next item owner is to be returned.
+ *
+ * \page listGET_OWNER_OF_NEXT_ENTRY listGET_OWNER_OF_NEXT_ENTRY
+ * \ingroup LinkedList
+ */
+// Modified by Kenji Arai / JH1PJL, October 31st,2010
+#define listGET_OWNER_OF_NEXT_ENTRY( pxTCB, pxList ) \
+{ \
+xList * const pxConstList = pxList; \
+ /* Increment the index to the next item and return the item, ensuring */ \
+ /* we don't return the marker used at the end of the list. */ \
+ ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \
+ if( ( pxConstList )->pxIndex == ( xListItem * ) &( ( pxConstList )->xListEnd ) ) \
+ { \
+ ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \
+ } \
+ pxTCB = (tskTCB *)(( pxConstList )->pxIndex->pvOwner); \
+}
+
+/*
+ * Access function to obtain the owner of the first entry in a list. Lists
+ * are normally sorted in ascending item value order.
+ *
+ * This function returns the pxOwner member of the first item in the list.
+ * The pxOwner parameter of a list item is a pointer to the object that owns
+ * the list item. In the scheduler this is normally a task control block.
+ * The pxOwner parameter effectively creates a two way link between the list
+ * item and its owner.
+ *
+ * @param pxList The list from which the owner of the head item is to be
+ * returned.
+ *
+ * \page listGET_OWNER_OF_HEAD_ENTRY listGET_OWNER_OF_HEAD_ENTRY
+ * \ingroup LinkedList
+ */
+#define listGET_OWNER_OF_HEAD_ENTRY( pxList ) ( ( pxList->uxNumberOfItems != ( unsigned portBASE_TYPE ) 0 ) ? ( (&( pxList->xListEnd ))->pxNext->pvOwner ) : ( NULL ) )
+
+/*
+ * Check to see if a list item is within a list. The list item maintains a
+ * "container" pointer that points to the list it is in. All this macro does
+ * is check to see if the container and the list match.
+ *
+ * @param pxList The list we want to know if the list item is within.
+ * @param pxListItem The list item we want to know if is in the list.
+ * @return pdTRUE is the list item is in the list, otherwise pdFALSE.
+ * pointer against
+ */
+#define listIS_CONTAINED_WITHIN( pxList, pxListItem ) ( ( pxListItem )->pvContainer == ( void * ) pxList )
+
+/*
+ * Must be called before a list is used! This initialises all the members
+ * of the list structure and inserts the xListEnd item into the list as a
+ * marker to the back of the list.
+ *
+ * @param pxList Pointer to the list being initialised.
+ *
+ * \page vListInitialise vListInitialise
+ * \ingroup LinkedList
+ */
+void vListInitialise( xList *pxList );
+
+/*
+ * Must be called before a list item is used. This sets the list container to
+ * null so the item does not think that it is already contained in a list.
+ *
+ * @param pxItem Pointer to the list item being initialised.
+ *
+ * \page vListInitialiseItem vListInitialiseItem
+ * \ingroup LinkedList
+ */
+void vListInitialiseItem( xListItem *pxItem );
+
+/*
+ * Insert a list item into a list. The item will be inserted into the list in
+ * a position determined by its item value (descending item value order).
+ *
+ * @param pxList The list into which the item is to be inserted.
+ *
+ * @param pxNewListItem The item to that is to be placed in the list.
+ *
+ * \page vListInsert vListInsert
+ * \ingroup LinkedList
+ */
+void vListInsert( xList *pxList, xListItem *pxNewListItem );
+
+/*
+ * Insert a list item into a list. The item will be inserted in a position
+ * such that it will be the last item within the list returned by multiple
+ * calls to listGET_OWNER_OF_NEXT_ENTRY.
+ *
+ * The list member pvIndex is used to walk through a list. Calling
+ * listGET_OWNER_OF_NEXT_ENTRY increments pvIndex to the next item in the list.
+ * Placing an item in a list using vListInsertEnd effectively places the item
+ * in the list position pointed to by pvIndex. This means that every other
+ * item within the list will be returned by listGET_OWNER_OF_NEXT_ENTRY before
+ * the pvIndex parameter again points to the item being inserted.
+ *
+ * @param pxList The list into which the item is to be inserted.
+ *
+ * @param pxNewListItem The list item to be inserted into the list.
+ *
+ * \page vListInsertEnd vListInsertEnd
+ * \ingroup LinkedList
+ */
+void vListInsertEnd( xList *pxList, xListItem *pxNewListItem );
+
+/*
+ * Remove an item from a list. The list item has a pointer to the list that
+ * it is in, so only the list item need be passed into the function.
+ *
+ * @param vListRemove The item to be removed. The item will remove itself from
+ * the list pointed to by it's pxContainer parameter.
+ *
+ * \page vListRemove vListRemove
+ * \ingroup LinkedList
+ */
+void vListRemove( xListItem *pxItemToRemove );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/include/mpu_wrappers.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/include/mpu_wrappers.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,143 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef MPU_WRAPPERS_H
+#define MPU_WRAPPERS_H
+
+// Modified by Kenji Arai / JH1PJL, November 3rd,2010
+#if 0
+/* This file redefines API functions to be called through a wrapper macro, but
+only for ports that are using the MPU. */
+#ifdef portUSING_MPU_WRAPPERS
+
+ /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE will be defined when this file is
+ included from queue.c or task.c to prevent it from having an effect within
+ those files. */
+ #ifndef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+ #define xTaskGenericCreate MPU_xTaskGenericCreate
+ #define vTaskAllocateMPURegions MPU_vTaskAllocateMPURegions
+ #define vTaskDelete MPU_vTaskDelete
+ #define vTaskDelayUntil MPU_vTaskDelayUntil
+ #define vTaskDelay MPU_vTaskDelay
+ #define uxTaskPriorityGet MPU_uxTaskPriorityGet
+ #define vTaskPrioritySet MPU_vTaskPrioritySet
+ #define vTaskSuspend MPU_vTaskSuspend
+ #define xTaskIsTaskSuspended MPU_xTaskIsTaskSuspended
+ #define vTaskResume MPU_vTaskResume
+ #define vTaskSuspendAll MPU_vTaskSuspendAll
+ #define xTaskResumeAll MPU_xTaskResumeAll
+ #define xTaskGetTickCount MPU_xTaskGetTickCount
+ #define uxTaskGetNumberOfTasks MPU_uxTaskGetNumberOfTasks
+ #define vTaskList MPU_vTaskList
+ #define vTaskGetRunTimeStats MPU_vTaskGetRunTimeStats
+ #define vTaskStartTrace MPU_vTaskStartTrace
+ #define ulTaskEndTrace MPU_ulTaskEndTrace
+ #define vTaskSetApplicationTaskTag MPU_vTaskSetApplicationTaskTag
+ #define xTaskGetApplicationTaskTag MPU_xTaskGetApplicationTaskTag
+ #define xTaskCallApplicationTaskHook MPU_xTaskCallApplicationTaskHook
+ #define uxTaskGetStackHighWaterMark MPU_uxTaskGetStackHighWaterMark
+ #define xTaskGetCurrentTaskHandle MPU_xTaskGetCurrentTaskHandle
+ #define xTaskGetSchedulerState MPU_xTaskGetSchedulerState
+
+ #define xQueueCreate MPU_xQueueCreate
+ #define xQueueCreateMutex MPU_xQueueCreateMutex
+ #define xQueueGiveMutexRecursive MPU_xQueueGiveMutexRecursive
+ #define xQueueTakeMutexRecursive MPU_xQueueTakeMutexRecursive
+ #define xQueueCreateCountingSemaphore MPU_xQueueCreateCountingSemaphore
+ #define xQueueGenericSend MPU_xQueueGenericSend
+ #define xQueueAltGenericSend MPU_xQueueAltGenericSend
+ #define xQueueAltGenericReceive MPU_xQueueAltGenericReceive
+ #define xQueueGenericReceive MPU_xQueueGenericReceive
+ #define uxQueueMessagesWaiting MPU_uxQueueMessagesWaiting
+ #define vQueueDelete MPU_vQueueDelete
+
+ #define pvPortMalloc MPU_pvPortMalloc
+ #define vPortFree MPU_vPortFree
+ #define xPortGetFreeHeapSize MPU_xPortGetFreeHeapSize
+ #define vPortInitialiseBlocks MPU_vPortInitialiseBlocks
+
+ #if configQUEUE_REGISTRY_SIZE > 0
+ #define vQueueAddToRegistry MPU_vQueueAddToRegistry
+ #define vQueueUnregisterQueue MPU_vQueueUnregisterQueue
+ #endif
+
+ /* Remove the privileged function macro. */
+ #define PRIVILEGED_FUNCTION
+
+ #else /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */
+
+ /* Ensure API functions go in the privileged execution section. */
+ #define PRIVILEGED_FUNCTION __attribute__((section("privileged_functions")))
+ #define PRIVILEGED_DATA __attribute__((section("privileged_data")))
+ //#define PRIVILEGED_DATA
+
+ #endif /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */
+
+#else /* portUSING_MPU_WRAPPERS */
+
+ #define PRIVILEGED_FUNCTION
+ #define PRIVILEGED_DATA
+ #define portUSING_MPU_WRAPPERS 0
+
+#endif /* portUSING_MPU_WRAPPERS */
+#endif
+
+// Modified by Kenji Arai / JH1PJL, November 3rd,2010
+ #define PRIVILEGED_FUNCTION
+ #define PRIVILEGED_DATA
+ #define portUSING_MPU_WRAPPERS 0
+
+
+#endif /* MPU_WRAPPERS_H */
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/include/portable.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/include/portable.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,396 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/*-----------------------------------------------------------
+ * Portable layer API. Each function must be defined for each port.
+ *----------------------------------------------------------*/
+
+#ifndef PORTABLE_H
+#define PORTABLE_H
+
+// Modified by Kenji Arai / JH1PJL, November 3rd,2010
+#if 0
+/* Include the macro file relevant to the port being used. */
+
+#ifdef OPEN_WATCOM_INDUSTRIAL_PC_PORT
+ #include "..\..\Source\portable\owatcom\16bitdos\pc\portmacro.h"
+ typedef void ( __interrupt __far *pxISR )();
+#endif
+
+#ifdef OPEN_WATCOM_FLASH_LITE_186_PORT
+ #include "..\..\Source\portable\owatcom\16bitdos\flsh186\portmacro.h"
+ typedef void ( __interrupt __far *pxISR )();
+#endif
+
+#ifdef GCC_MEGA_AVR
+ #include "../portable/GCC/ATMega323/portmacro.h"
+#endif
+
+#ifdef IAR_MEGA_AVR
+ #include "../portable/IAR/ATMega323/portmacro.h"
+#endif
+
+#ifdef MPLAB_PIC24_PORT
+ #include "..\..\Source\portable\MPLAB\PIC24_dsPIC\portmacro.h"
+#endif
+
+#ifdef MPLAB_DSPIC_PORT
+ #include "..\..\Source\portable\MPLAB\PIC24_dsPIC\portmacro.h"
+#endif
+
+#ifdef MPLAB_PIC18F_PORT
+ #include "..\..\Source\portable\MPLAB\PIC18F\portmacro.h"
+#endif
+
+#ifdef MPLAB_PIC32MX_PORT
+ #include "..\..\Source\portable\MPLAB\PIC32MX\portmacro.h"
+#endif
+
+#ifdef _FEDPICC
+ #include "libFreeRTOS/Include/portmacro.h"
+#endif
+
+#ifdef SDCC_CYGNAL
+ #include "../../Source/portable/SDCC/Cygnal/portmacro.h"
+#endif
+
+#ifdef GCC_ARM7
+ #include "../../Source/portable/GCC/ARM7_LPC2000/portmacro.h"
+#endif
+
+#ifdef GCC_ARM7_ECLIPSE
+ #include "portmacro.h"
+#endif
+
+#ifdef ROWLEY_LPC23xx
+ #include "../../Source/portable/GCC/ARM7_LPC23xx/portmacro.h"
+#endif
+
+#ifdef IAR_MSP430
+ #include "..\..\Source\portable\IAR\MSP430\portmacro.h"
+#endif
+
+#ifdef GCC_MSP430
+ #include "../../Source/portable/GCC/MSP430F449/portmacro.h"
+#endif
+
+#ifdef ROWLEY_MSP430
+ #include "../../Source/portable/Rowley/MSP430F449/portmacro.h"
+#endif
+
+#ifdef ARM7_LPC21xx_KEIL_RVDS
+ #include "..\..\Source\portable\RVDS\ARM7_LPC21xx\portmacro.h"
+#endif
+
+#ifdef SAM7_GCC
+ #include "../../Source/portable/GCC/ARM7_AT91SAM7S/portmacro.h"
+#endif
+
+#ifdef SAM7_IAR
+ #include "..\..\Source\portable\IAR\AtmelSAM7S64\portmacro.h"
+#endif
+
+#ifdef SAM9XE_IAR
+ #include "..\..\Source\portable\IAR\AtmelSAM9XE\portmacro.h"
+#endif
+
+#ifdef LPC2000_IAR
+ #include "..\..\Source\portable\IAR\LPC2000\portmacro.h"
+#endif
+
+#ifdef STR71X_IAR
+ #include "..\..\Source\portable\IAR\STR71x\portmacro.h"
+#endif
+
+#ifdef STR75X_IAR
+ #include "..\..\Source\portable\IAR\STR75x\portmacro.h"
+#endif
+
+#ifdef STR75X_GCC
+ #include "..\..\Source\portable\GCC\STR75x\portmacro.h"
+#endif
+
+#ifdef STR91X_IAR
+ #include "..\..\Source\portable\IAR\STR91x\portmacro.h"
+#endif
+
+#ifdef GCC_H8S
+ #include "../../Source/portable/GCC/H8S2329/portmacro.h"
+#endif
+
+#ifdef GCC_AT91FR40008
+ #include "../../Source/portable/GCC/ARM7_AT91FR40008/portmacro.h"
+#endif
+
+#ifdef RVDS_ARMCM3_LM3S102
+ #include "../../Source/portable/RVDS/ARM_CM3/portmacro.h"
+#endif
+
+#ifdef GCC_ARMCM3_LM3S102
+ #include "../../Source/portable/GCC/ARM_CM3/portmacro.h"
+#endif
+
+#ifdef GCC_ARMCM3
+ #include "../../Source/portable/GCC/ARM_CM3/portmacro.h"
+#endif
+
+#ifdef IAR_ARM_CM3
+ #include "../../Source/portable/IAR/ARM_CM3/portmacro.h"
+#endif
+
+#ifdef IAR_ARMCM3_LM
+ #include "../../Source/portable/IAR/ARM_CM3/portmacro.h"
+#endif
+
+#ifdef HCS12_CODE_WARRIOR
+ #include "../../Source/portable/CodeWarrior/HCS12/portmacro.h"
+#endif
+
+#ifdef MICROBLAZE_GCC
+ #include "../../Source/portable/GCC/MicroBlaze/portmacro.h"
+#endif
+
+#ifdef TERN_EE
+ #include "..\..\Source\portable\Paradigm\Tern_EE\small\portmacro.h"
+#endif
+
+#ifdef GCC_HCS12
+ #include "../../Source/portable/GCC/HCS12/portmacro.h"
+#endif
+
+#ifdef GCC_MCF5235
+ #include "../../Source/portable/GCC/MCF5235/portmacro.h"
+#endif
+
+#ifdef COLDFIRE_V2_GCC
+ #include "../../../Source/portable/GCC/ColdFire_V2/portmacro.h"
+#endif
+
+#ifdef COLDFIRE_V2_CODEWARRIOR
+ #include "../../Source/portable/CodeWarrior/ColdFire_V2/portmacro.h"
+#endif
+
+#ifdef GCC_PPC405
+ #include "../../Source/portable/GCC/PPC405_Xilinx/portmacro.h"
+#endif
+
+#ifdef GCC_PPC440
+ #include "../../Source/portable/GCC/PPC440_Xilinx/portmacro.h"
+#endif
+
+#ifdef _16FX_SOFTUNE
+ #include "..\..\Source\portable\Softune\MB96340\portmacro.h"
+#endif
+
+#ifdef BCC_INDUSTRIAL_PC_PORT
+ /* A short file name has to be used in place of the normal
+ FreeRTOSConfig.h when using the Borland compiler. */
+ #include "frconfig.h"
+ #include "..\portable\BCC\16BitDOS\PC\prtmacro.h"
+ typedef void ( __interrupt __far *pxISR )();
+#endif
+
+#ifdef BCC_FLASH_LITE_186_PORT
+ /* A short file name has to be used in place of the normal
+ FreeRTOSConfig.h when using the Borland compiler. */
+ #include "frconfig.h"
+ #include "..\portable\BCC\16BitDOS\flsh186\prtmacro.h"
+ typedef void ( __interrupt __far *pxISR )();
+#endif
+
+#ifdef __GNUC__
+ #ifdef __AVR32_AVR32A__
+ #include "portmacro.h"
+ #endif
+#endif
+
+#ifdef __ICCAVR32__
+ #ifdef __CORE__
+ #if __CORE__ == __AVR32A__
+ #include "portmacro.h"
+ #endif
+ #endif
+#endif
+
+#ifdef __91467D
+ #include "portmacro.h"
+#endif
+
+#ifdef __96340
+ #include "portmacro.h"
+#endif
+
+
+#ifdef __IAR_V850ES_Fx3__
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"
+#endif
+
+#ifdef __IAR_V850ES_Jx3__
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"
+#endif
+
+#ifdef __IAR_V850ES_Jx3_L__
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"
+#endif
+
+#ifdef __IAR_V850ES_Jx2__
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"
+#endif
+
+#ifdef __IAR_V850ES_Hx2__
+ #include "../../Source/portable/IAR/V850ES/portmacro.h"
+#endif
+
+#ifdef __IAR_78K0R_Kx3__
+ #include "../../Source/portable/IAR/78K0R/portmacro.h"
+#endif
+
+#ifdef __IAR_78K0R_Kx3L__
+ #include "../../Source/portable/IAR/78K0R/portmacro.h"
+#endif
+#endif
+
+/* Catch all to ensure portmacro.h is included in the build. Newer demos
+have the path as part of the project options, rather than as relative from
+the project location. If portENTER_CRITICAL() has not been defined then
+portmacro.h has not yet been included - as every portmacro.h provides a
+portENTER_CRITICAL() definition. Check the demo application for your demo
+to find the path to the correct portmacro.h file. */
+#ifndef portENTER_CRITICAL
+ #include "../portable/GCC/ARM_CM3/portmacro.h"
+#endif
+
+#if portBYTE_ALIGNMENT == 8
+ #define portBYTE_ALIGNMENT_MASK ( 0x0007 )
+#endif
+
+// Modified by Kenji Arai / JH1PJL, November 3rd,2010
+#if 0
+#if portBYTE_ALIGNMENT == 4
+ #define portBYTE_ALIGNMENT_MASK ( 0x0003 )
+#endif
+
+#if portBYTE_ALIGNMENT == 2
+ #define portBYTE_ALIGNMENT_MASK ( 0x0001 )
+#endif
+
+#if portBYTE_ALIGNMENT == 1
+ #define portBYTE_ALIGNMENT_MASK ( 0x0000 )
+#endif
+
+#ifndef portBYTE_ALIGNMENT_MASK
+ #error "Invalid portBYTE_ALIGNMENT definition"
+#endif
+#endif
+
+#ifndef portNUM_CONFIGURABLE_REGIONS
+ #define portNUM_CONFIGURABLE_REGIONS 1
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "mpu_wrappers.h"
+
+/*
+ * Setup the stack of a new task so it is ready to be placed under the
+ * scheduler control. The registers have to be placed on the stack in
+ * the order that the port expects to find them.
+ *
+ */
+#if( portUSING_MPU_WRAPPERS == 1 )
+ portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters, portBASE_TYPE xRunPrivileged ) PRIVILEGED_FUNCTION;
+#else
+ portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters );
+#endif
+
+/*
+ * Map to the memory management routines required for the port.
+ */
+void *pvPortMalloc( size_t xSize ) PRIVILEGED_FUNCTION;
+void vPortFree( void *pv ) PRIVILEGED_FUNCTION;
+void vPortInitialiseBlocks( void ) PRIVILEGED_FUNCTION;
+size_t xPortGetFreeHeapSize( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Setup the hardware ready for the scheduler to take control. This generally
+ * sets up a tick interrupt and sets timers for the correct tick frequency.
+ */
+portBASE_TYPE xPortStartScheduler( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Undo any hardware/ISR setup that was performed by xPortStartScheduler() so
+ * the hardware is left in its original condition after the scheduler stops
+ * executing.
+ */
+void vPortEndScheduler( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * The structures and methods of manipulating the MPU are contained within the
+ * port layer.
+ *
+ * Fills the xMPUSettings structure with the memory region information
+ * contained in xRegions.
+ */
+#if( portUSING_MPU_WRAPPERS == 1 )
+ struct xMEMORY_REGION;
+ void vPortStoreTaskMPUSettings( xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION * const xRegions, portSTACK_TYPE *pxBottomOfStack, unsigned short usStackDepth ) PRIVILEGED_FUNCTION;
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTABLE_H */
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/include/projdefs.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/FreeRTOS/Source/include/projdefs.h Sat Jan 01 11:17:45 2011 +0000 @@ -0,0 +1,77 @@ +/* + FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd. + + *************************************************************************** + * * + * If you are: * + * * + * + New to FreeRTOS, * + * + Wanting to learn FreeRTOS or multitasking in general quickly * + * + Looking for basic training, * + * + Wanting to improve your FreeRTOS skills and productivity * + * * + * then take a look at the FreeRTOS eBook * + * * + * "Using the FreeRTOS Real Time Kernel - a Practical Guide" * + * http://www.FreeRTOS.org/Documentation * + * * + * A pdf reference manual is also available. Both are usually delivered * + * to your inbox within 20 minutes to two hours when purchased between 8am * + * and 8pm GMT (although please allow up to 24 hours in case of * + * exceptional circumstances). Thank you for your support! * + * * + *************************************************************************** + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation AND MODIFIED BY the FreeRTOS exception. + ***NOTE*** The exception to the GPL is included to allow you to distribute + a combined work that includes FreeRTOS without being obliged to provide the + source code for proprietary components outside of the FreeRTOS kernel. + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. You should have received a copy of the GNU General Public + License and the FreeRTOS license exception along with FreeRTOS; if not it + can be viewed here: http://www.freertos.org/a00114.html and also obtained + by writing to Richard Barry, contact details for whom are available on the + FreeRTOS WEB site. + + 1 tab == 4 spaces! + + http://www.FreeRTOS.org - Documentation, latest information, license and + contact details. + + http://www.SafeRTOS.com - A version that is certified for use in safety + critical systems. + + http://www.OpenRTOS.com - Commercial support, development, porting, + licensing and training services. +*/ + +#ifndef PROJDEFS_H +#define PROJDEFS_H + +/* Defines the prototype to which task functions must conform. */ +typedef void (*pdTASK_CODE)( void * ); + +#define pdTRUE ( 1 ) +#define pdFALSE ( 0 ) + +#define pdPASS ( 1 ) +#define pdFAIL ( 0 ) +#define errQUEUE_EMPTY ( 0 ) +#define errQUEUE_FULL ( 0 ) + +/* Error definitions. */ +#define errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY ( -1 ) +#define errNO_TASK_TO_RUN ( -2 ) +#define errQUEUE_BLOCKED ( -4 ) +#define errQUEUE_YIELD ( -5 ) + +#endif /* PROJDEFS_H */ + + +
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/include/queue.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/include/queue.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,1259 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef INC_FREERTOS_H
+ #error "#include FreeRTOS.h" must appear in source files before "#include queue.h"
+#endif
+
+
+
+
+#ifndef QUEUE_H
+#define QUEUE_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "mpu_wrappers.h"
+
+typedef void * xQueueHandle;
+
+
+/* For internal use only. */
+#define queueSEND_TO_BACK ( 0 )
+#define queueSEND_TO_FRONT ( 1 )
+
+
+/**
+ * queue. h
+ * <pre>
+ xQueueHandle xQueueCreate(
+ unsigned portBASE_TYPE uxQueueLength,
+ unsigned portBASE_TYPE uxItemSize
+ );
+ * </pre>
+ *
+ * Creates a new queue instance. This allocates the storage required by the
+ * new queue and returns a handle for the queue.
+ *
+ * @param uxQueueLength The maximum number of items that the queue can contain.
+ *
+ * @param uxItemSize The number of bytes each item in the queue will require.
+ * Items are queued by copy, not by reference, so this is the number of bytes
+ * that will be copied for each posted item. Each item on the queue must be
+ * the same size.
+ *
+ * @return If the queue is successfully create then a handle to the newly
+ * created queue is returned. If the queue cannot be created then 0 is
+ * returned.
+ *
+ * Example usage:
+ <pre>
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ };
+
+ void vATask( void *pvParameters )
+ {
+ xQueueHandle xQueue1, xQueue2;
+
+ // Create a queue capable of containing 10 unsigned long values.
+ xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );
+ if( xQueue1 == 0 )
+ {
+ // Queue was not created and must not be used.
+ }
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+ if( xQueue2 == 0 )
+ {
+ // Queue was not created and must not be used.
+ }
+
+ // ... Rest of task code.
+ }
+ </pre>
+ * \defgroup xQueueCreate xQueueCreate
+ * \ingroup QueueManagement
+ */
+xQueueHandle xQueueCreate( unsigned portBASE_TYPE uxQueueLength, unsigned portBASE_TYPE uxItemSize );
+
+/**
+ * queue. h
+ * <pre>
+ portBASE_TYPE xQueueSendToToFront(
+ xQueueHandle xQueue,
+ const void * pvItemToQueue,
+ portTickType xTicksToWait
+ );
+ * </pre>
+ *
+ * This is a macro that calls xQueueGenericSend().
+ *
+ * Post an item to the front of a queue. The item is queued by copy, not by
+ * reference. This function must not be called from an interrupt service
+ * routine. See xQueueSendFromISR () for an alternative which may be used
+ * in an ISR.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for space to become available on the queue, should it already
+ * be full. The call will return immediately if this is set to 0 and the
+ * queue is full. The time is defined in tick periods so the constant
+ * portTICK_RATE_MS should be used to convert to real time if this is required.
+ *
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+ <pre>
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ unsigned long ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ xQueueHandle xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 unsigned long values.
+ xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+ // ...
+
+ if( xQueue1 != 0 )
+ {
+ // Send an unsigned long. Wait for 10 ticks for space to become
+ // available if necessary.
+ if( xQueueSendToFront( xQueue1, ( void * ) &ulVar, ( portTickType ) 10 ) != pdPASS )
+ {
+ // Failed to post the message, even after 10 ticks.
+ }
+ }
+
+ if( xQueue2 != 0 )
+ {
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueSendToFront( xQueue2, ( void * ) &pxMessage, ( portTickType ) 0 );
+ }
+
+ // ... Rest of task code.
+ }
+ </pre>
+ * \defgroup xQueueSend xQueueSend
+ * \ingroup QueueManagement
+ */
+#define xQueueSendToFront( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( xQueue, pvItemToQueue, xTicksToWait, queueSEND_TO_FRONT )
+
+/**
+ * queue. h
+ * <pre>
+ portBASE_TYPE xQueueSendToBack(
+ xQueueHandle xQueue,
+ const void * pvItemToQueue,
+ portTickType xTicksToWait
+ );
+ * </pre>
+ *
+ * This is a macro that calls xQueueGenericSend().
+ *
+ * Post an item to the back of a queue. The item is queued by copy, not by
+ * reference. This function must not be called from an interrupt service
+ * routine. See xQueueSendFromISR () for an alternative which may be used
+ * in an ISR.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for space to become available on the queue, should it already
+ * be full. The call will return immediately if this is set to 0 and the queue
+ * is full. The time is defined in tick periods so the constant
+ * portTICK_RATE_MS should be used to convert to real time if this is required.
+ *
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+ <pre>
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ unsigned long ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ xQueueHandle xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 unsigned long values.
+ xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+ // ...
+
+ if( xQueue1 != 0 )
+ {
+ // Send an unsigned long. Wait for 10 ticks for space to become
+ // available if necessary.
+ if( xQueueSendToBack( xQueue1, ( void * ) &ulVar, ( portTickType ) 10 ) != pdPASS )
+ {
+ // Failed to post the message, even after 10 ticks.
+ }
+ }
+
+ if( xQueue2 != 0 )
+ {
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueSendToBack( xQueue2, ( void * ) &pxMessage, ( portTickType ) 0 );
+ }
+
+ // ... Rest of task code.
+ }
+ </pre>
+ * \defgroup xQueueSend xQueueSend
+ * \ingroup QueueManagement
+ */
+#define xQueueSendToBack( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( xQueue, pvItemToQueue, xTicksToWait, queueSEND_TO_BACK )
+
+/**
+ * queue. h
+ * <pre>
+ portBASE_TYPE xQueueSend(
+ xQueueHandle xQueue,
+ const void * pvItemToQueue,
+ portTickType xTicksToWait
+ );
+ * </pre>
+ *
+ * This is a macro that calls xQueueGenericSend(). It is included for
+ * backward compatibility with versions of FreeRTOS.org that did not
+ * include the xQueueSendToFront() and xQueueSendToBack() macros. It is
+ * equivalent to xQueueSendToBack().
+ *
+ * Post an item on a queue. The item is queued by copy, not by reference.
+ * This function must not be called from an interrupt service routine.
+ * See xQueueSendFromISR () for an alternative which may be used in an ISR.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for space to become available on the queue, should it already
+ * be full. The call will return immediately if this is set to 0 and the
+ * queue is full. The time is defined in tick periods so the constant
+ * portTICK_RATE_MS should be used to convert to real time if this is required.
+ *
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+ <pre>
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ unsigned long ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ xQueueHandle xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 unsigned long values.
+ xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+ // ...
+
+ if( xQueue1 != 0 )
+ {
+ // Send an unsigned long. Wait for 10 ticks for space to become
+ // available if necessary.
+ if( xQueueSend( xQueue1, ( void * ) &ulVar, ( portTickType ) 10 ) != pdPASS )
+ {
+ // Failed to post the message, even after 10 ticks.
+ }
+ }
+
+ if( xQueue2 != 0 )
+ {
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueSend( xQueue2, ( void * ) &pxMessage, ( portTickType ) 0 );
+ }
+
+ // ... Rest of task code.
+ }
+ </pre>
+ * \defgroup xQueueSend xQueueSend
+ * \ingroup QueueManagement
+ */
+#define xQueueSend( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( xQueue, pvItemToQueue, xTicksToWait, queueSEND_TO_BACK )
+
+
+/**
+ * queue. h
+ * <pre>
+ portBASE_TYPE xQueueGenericSend(
+ xQueueHandle xQueue,
+ const void * pvItemToQueue,
+ portTickType xTicksToWait
+ portBASE_TYPE xCopyPosition
+ );
+ * </pre>
+ *
+ * It is preferred that the macros xQueueSend(), xQueueSendToFront() and
+ * xQueueSendToBack() are used in place of calling this function directly.
+ *
+ * Post an item on a queue. The item is queued by copy, not by reference.
+ * This function must not be called from an interrupt service routine.
+ * See xQueueSendFromISR () for an alternative which may be used in an ISR.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for space to become available on the queue, should it already
+ * be full. The call will return immediately if this is set to 0 and the
+ * queue is full. The time is defined in tick periods so the constant
+ * portTICK_RATE_MS should be used to convert to real time if this is required.
+ *
+ * @param xCopyPosition Can take the value queueSEND_TO_BACK to place the
+ * item at the back of the queue, or queueSEND_TO_FRONT to place the item
+ * at the front of the queue (for high priority messages).
+ *
+ * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+ <pre>
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ unsigned long ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ xQueueHandle xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 unsigned long values.
+ xQueue1 = xQueueCreate( 10, sizeof( unsigned long ) );
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+ // ...
+
+ if( xQueue1 != 0 )
+ {
+ // Send an unsigned long. Wait for 10 ticks for space to become
+ // available if necessary.
+ if( xQueueGenericSend( xQueue1, ( void * ) &ulVar, ( portTickType ) 10, queueSEND_TO_BACK ) != pdPASS )
+ {
+ // Failed to post the message, even after 10 ticks.
+ }
+ }
+
+ if( xQueue2 != 0 )
+ {
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueGenericSend( xQueue2, ( void * ) &pxMessage, ( portTickType ) 0, queueSEND_TO_BACK );
+ }
+
+ // ... Rest of task code.
+ }
+ </pre>
+ * \defgroup xQueueSend xQueueSend
+ * \ingroup QueueManagement
+ */
+signed portBASE_TYPE xQueueGenericSend( xQueueHandle xQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition );
+
+/**
+ * queue. h
+ * <pre>
+ portBASE_TYPE xQueuePeek(
+ xQueueHandle xQueue,
+ void *pvBuffer,
+ portTickType xTicksToWait
+ );</pre>
+ *
+ * This is a macro that calls the xQueueGenericReceive() function.
+ *
+ * Receive an item from a queue without removing the item from the queue.
+ * The item is received by copy so a buffer of adequate size must be
+ * provided. The number of bytes copied into the buffer was defined when
+ * the queue was created.
+ *
+ * Successfully received items remain on the queue so will be returned again
+ * by the next call, or a call to xQueueReceive().
+ *
+ * This macro must not be used in an interrupt service routine.
+ *
+ * @param pxQueue The handle to the queue from which the item is to be
+ * received.
+ *
+ * @param pvBuffer Pointer to the buffer into which the received item will
+ * be copied.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for an item to receive should the queue be empty at the time
+ * of the call. The time is defined in tick periods so the constant
+ * portTICK_RATE_MS should be used to convert to real time if this is required.
+ * xQueuePeek() will return immediately if xTicksToWait is 0 and the queue
+ * is empty.
+ *
+ * @return pdTRUE if an item was successfully received from the queue,
+ * otherwise pdFALSE.
+ *
+ * Example usage:
+ <pre>
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ xQueueHandle xQueue;
+
+ // Task to create a queue and post a value.
+ void vATask( void *pvParameters )
+ {
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );
+ if( xQueue == 0 )
+ {
+ // Failed to create the queue.
+ }
+
+ // ...
+
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueSend( xQueue, ( void * ) &pxMessage, ( portTickType ) 0 );
+
+ // ... Rest of task code.
+ }
+
+ // Task to peek the data from the queue.
+ void vADifferentTask( void *pvParameters )
+ {
+ struct AMessage *pxRxedMessage;
+
+ if( xQueue != 0 )
+ {
+ // Peek a message on the created queue. Block for 10 ticks if a
+ // message is not immediately available.
+ if( xQueuePeek( xQueue, &( pxRxedMessage ), ( portTickType ) 10 ) )
+ {
+ // pcRxedMessage now points to the struct AMessage variable posted
+ // by vATask, but the item still remains on the queue.
+ }
+ }
+
+ // ... Rest of task code.
+ }
+ </pre>
+ * \defgroup xQueueReceive xQueueReceive
+ * \ingroup QueueManagement
+ */
+#define xQueuePeek( xQueue, pvBuffer, xTicksToWait ) xQueueGenericReceive( xQueue, pvBuffer, xTicksToWait, pdTRUE )
+
+/**
+ * queue. h
+ * <pre>
+ portBASE_TYPE xQueueReceive(
+ xQueueHandle xQueue,
+ void *pvBuffer,
+ portTickType xTicksToWait
+ );</pre>
+ *
+ * This is a macro that calls the xQueueGenericReceive() function.
+ *
+ * Receive an item from a queue. The item is received by copy so a buffer of
+ * adequate size must be provided. The number of bytes copied into the buffer
+ * was defined when the queue was created.
+ *
+ * Successfully received items are removed from the queue.
+ *
+ * This function must not be used in an interrupt service routine. See
+ * xQueueReceiveFromISR for an alternative that can.
+ *
+ * @param pxQueue The handle to the queue from which the item is to be
+ * received.
+ *
+ * @param pvBuffer Pointer to the buffer into which the received item will
+ * be copied.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for an item to receive should the queue be empty at the time
+ * of the call. xQueueReceive() will return immediately if xTicksToWait
+ * is zero and the queue is empty. The time is defined in tick periods so the
+ * constant portTICK_RATE_MS should be used to convert to real time if this is
+ * required.
+ *
+ * @return pdTRUE if an item was successfully received from the queue,
+ * otherwise pdFALSE.
+ *
+ * Example usage:
+ <pre>
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ xQueueHandle xQueue;
+
+ // Task to create a queue and post a value.
+ void vATask( void *pvParameters )
+ {
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );
+ if( xQueue == 0 )
+ {
+ // Failed to create the queue.
+ }
+
+ // ...
+
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueSend( xQueue, ( void * ) &pxMessage, ( portTickType ) 0 );
+
+ // ... Rest of task code.
+ }
+
+ // Task to receive from the queue.
+ void vADifferentTask( void *pvParameters )
+ {
+ struct AMessage *pxRxedMessage;
+
+ if( xQueue != 0 )
+ {
+ // Receive a message on the created queue. Block for 10 ticks if a
+ // message is not immediately available.
+ if( xQueueReceive( xQueue, &( pxRxedMessage ), ( portTickType ) 10 ) )
+ {
+ // pcRxedMessage now points to the struct AMessage variable posted
+ // by vATask.
+ }
+ }
+
+ // ... Rest of task code.
+ }
+ </pre>
+ * \defgroup xQueueReceive xQueueReceive
+ * \ingroup QueueManagement
+ */
+#define xQueueReceive( xQueue, pvBuffer, xTicksToWait ) xQueueGenericReceive( xQueue, pvBuffer, xTicksToWait, pdFALSE )
+
+
+/**
+ * queue. h
+ * <pre>
+ portBASE_TYPE xQueueGenericReceive(
+ xQueueHandle xQueue,
+ void *pvBuffer,
+ portTickType xTicksToWait
+ portBASE_TYPE xJustPeek
+ );</pre>
+ *
+ * It is preferred that the macro xQueueReceive() be used rather than calling
+ * this function directly.
+ *
+ * Receive an item from a queue. The item is received by copy so a buffer of
+ * adequate size must be provided. The number of bytes copied into the buffer
+ * was defined when the queue was created.
+ *
+ * This function must not be used in an interrupt service routine. See
+ * xQueueReceiveFromISR for an alternative that can.
+ *
+ * @param pxQueue The handle to the queue from which the item is to be
+ * received.
+ *
+ * @param pvBuffer Pointer to the buffer into which the received item will
+ * be copied.
+ *
+ * @param xTicksToWait The maximum amount of time the task should block
+ * waiting for an item to receive should the queue be empty at the time
+ * of the call. The time is defined in tick periods so the constant
+ * portTICK_RATE_MS should be used to convert to real time if this is required.
+ * xQueueGenericReceive() will return immediately if the queue is empty and
+ * xTicksToWait is 0.
+ *
+ * @param xJustPeek When set to true, the item received from the queue is not
+ * actually removed from the queue - meaning a subsequent call to
+ * xQueueReceive() will return the same item. When set to false, the item
+ * being received from the queue is also removed from the queue.
+ *
+ * @return pdTRUE if an item was successfully received from the queue,
+ * otherwise pdFALSE.
+ *
+ * Example usage:
+ <pre>
+ struct AMessage
+ {
+ char ucMessageID;
+ char ucData[ 20 ];
+ } xMessage;
+
+ xQueueHandle xQueue;
+
+ // Task to create a queue and post a value.
+ void vATask( void *pvParameters )
+ {
+ struct AMessage *pxMessage;
+
+ // Create a queue capable of containing 10 pointers to AMessage structures.
+ // These should be passed by pointer as they contain a lot of data.
+ xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );
+ if( xQueue == 0 )
+ {
+ // Failed to create the queue.
+ }
+
+ // ...
+
+ // Send a pointer to a struct AMessage object. Don't block if the
+ // queue is already full.
+ pxMessage = & xMessage;
+ xQueueSend( xQueue, ( void * ) &pxMessage, ( portTickType ) 0 );
+
+ // ... Rest of task code.
+ }
+
+ // Task to receive from the queue.
+ void vADifferentTask( void *pvParameters )
+ {
+ struct AMessage *pxRxedMessage;
+
+ if( xQueue != 0 )
+ {
+ // Receive a message on the created queue. Block for 10 ticks if a
+ // message is not immediately available.
+ if( xQueueGenericReceive( xQueue, &( pxRxedMessage ), ( portTickType ) 10 ) )
+ {
+ // pcRxedMessage now points to the struct AMessage variable posted
+ // by vATask.
+ }
+ }
+
+ // ... Rest of task code.
+ }
+ </pre>
+ * \defgroup xQueueReceive xQueueReceive
+ * \ingroup QueueManagement
+ */
+signed portBASE_TYPE xQueueGenericReceive( xQueueHandle xQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeek );
+
+/**
+ * queue. h
+ * <pre>unsigned portBASE_TYPE uxQueueMessagesWaiting( const xQueueHandle xQueue );</pre>
+ *
+ * Return the number of messages stored in a queue.
+ *
+ * @param xQueue A handle to the queue being queried.
+ *
+ * @return The number of messages available in the queue.
+ *
+ * \page uxQueueMessagesWaiting uxQueueMessagesWaiting
+ * \ingroup QueueManagement
+ */
+unsigned portBASE_TYPE uxQueueMessagesWaiting( const xQueueHandle xQueue );
+
+/**
+ * queue. h
+ * <pre>void vQueueDelete( xQueueHandle xQueue );</pre>
+ *
+ * Delete a queue - freeing all the memory allocated for storing of items
+ * placed on the queue.
+ *
+ * @param xQueue A handle to the queue to be deleted.
+ *
+ * \page vQueueDelete vQueueDelete
+ * \ingroup QueueManagement
+ */
+void vQueueDelete( xQueueHandle xQueue );
+
+/**
+ * queue. h
+ * <pre>
+ portBASE_TYPE xQueueSendToFrontFromISR(
+ xQueueHandle pxQueue,
+ const void *pvItemToQueue,
+ portBASE_TYPE *pxHigherPriorityTaskWoken
+ );
+ </pre>
+ *
+ * This is a macro that calls xQueueGenericSendFromISR().
+ *
+ * Post an item to the front of a queue. It is safe to use this macro from
+ * within an interrupt service routine.
+ *
+ * Items are queued by copy not reference so it is preferable to only
+ * queue small items, especially when called from an ISR. In most cases
+ * it would be preferable to store a pointer to the item being queued.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueSendToFrontFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task. If xQueueSendToFromFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise
+ * errQUEUE_FULL.
+ *
+ * Example usage for buffered IO (where the ISR can obtain more than one value
+ * per call):
+ <pre>
+ void vBufferISR( void )
+ {
+ char cIn;
+ portBASE_TYPE xHigherPrioritTaskWoken;
+
+ // We have not woken a task at the start of the ISR.
+ xHigherPriorityTaskWoken = pdFALSE;
+
+ // Loop until the buffer is empty.
+ do
+ {
+ // Obtain a byte from the buffer.
+ cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+ // Post the byte.
+ xQueueSendToFrontFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );
+
+ } while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+ // Now the buffer is empty we can switch context if necessary.
+ if( xHigherPriorityTaskWoken )
+ {
+ taskYIELD ();
+ }
+ }
+ </pre>
+ *
+ * \defgroup xQueueSendFromISR xQueueSendFromISR
+ * \ingroup QueueManagement
+ */
+#define xQueueSendToFrontFromISR( pxQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( pxQueue, pvItemToQueue, pxHigherPriorityTaskWoken, queueSEND_TO_FRONT )
+
+
+/**
+ * queue. h
+ * <pre>
+ portBASE_TYPE xQueueSendToBackFromISR(
+ xQueueHandle pxQueue,
+ const void *pvItemToQueue,
+ portBASE_TYPE *pxHigherPriorityTaskWoken
+ );
+ </pre>
+ *
+ * This is a macro that calls xQueueGenericSendFromISR().
+ *
+ * Post an item to the back of a queue. It is safe to use this macro from
+ * within an interrupt service routine.
+ *
+ * Items are queued by copy not reference so it is preferable to only
+ * queue small items, especially when called from an ISR. In most cases
+ * it would be preferable to store a pointer to the item being queued.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueSendToBackFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task. If xQueueSendToBackFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise
+ * errQUEUE_FULL.
+ *
+ * Example usage for buffered IO (where the ISR can obtain more than one value
+ * per call):
+ <pre>
+ void vBufferISR( void )
+ {
+ char cIn;
+ portBASE_TYPE xHigherPriorityTaskWoken;
+
+ // We have not woken a task at the start of the ISR.
+ xHigherPriorityTaskWoken = pdFALSE;
+
+ // Loop until the buffer is empty.
+ do
+ {
+ // Obtain a byte from the buffer.
+ cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+ // Post the byte.
+ xQueueSendToBackFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );
+
+ } while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+ // Now the buffer is empty we can switch context if necessary.
+ if( xHigherPriorityTaskWoken )
+ {
+ taskYIELD ();
+ }
+ }
+ </pre>
+ *
+ * \defgroup xQueueSendFromISR xQueueSendFromISR
+ * \ingroup QueueManagement
+ */
+#define xQueueSendToBackFromISR( pxQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( pxQueue, pvItemToQueue, pxHigherPriorityTaskWoken, queueSEND_TO_BACK )
+
+/**
+ * queue. h
+ * <pre>
+ portBASE_TYPE xQueueSendFromISR(
+ xQueueHandle pxQueue,
+ const void *pvItemToQueue,
+ portBASE_TYPE *pxHigherPriorityTaskWoken
+ );
+ </pre>
+ *
+ * This is a macro that calls xQueueGenericSendFromISR(). It is included
+ * for backward compatibility with versions of FreeRTOS.org that did not
+ * include the xQueueSendToBackFromISR() and xQueueSendToFrontFromISR()
+ * macros.
+ *
+ * Post an item to the back of a queue. It is safe to use this function from
+ * within an interrupt service routine.
+ *
+ * Items are queued by copy not reference so it is preferable to only
+ * queue small items, especially when called from an ISR. In most cases
+ * it would be preferable to store a pointer to the item being queued.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueSendFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task. If xQueueSendFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise
+ * errQUEUE_FULL.
+ *
+ * Example usage for buffered IO (where the ISR can obtain more than one value
+ * per call):
+ <pre>
+ void vBufferISR( void )
+ {
+ char cIn;
+ portBASE_TYPE xHigherPriorityTaskWoken;
+
+ // We have not woken a task at the start of the ISR.
+ xHigherPriorityTaskWoken = pdFALSE;
+
+ // Loop until the buffer is empty.
+ do
+ {
+ // Obtain a byte from the buffer.
+ cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+ // Post the byte.
+ xQueueSendFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );
+
+ } while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+ // Now the buffer is empty we can switch context if necessary.
+ if( xHigherPriorityTaskWoken )
+ {
+ // Actual macro used here is port specific.
+ taskYIELD_FROM_ISR ();
+ }
+ }
+ </pre>
+ *
+ * \defgroup xQueueSendFromISR xQueueSendFromISR
+ * \ingroup QueueManagement
+ */
+#define xQueueSendFromISR( pxQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( pxQueue, pvItemToQueue, pxHigherPriorityTaskWoken, queueSEND_TO_BACK )
+
+/**
+ * queue. h
+ * <pre>
+ portBASE_TYPE xQueueGenericSendFromISR(
+ xQueueHandle pxQueue,
+ const void *pvItemToQueue,
+ portBASE_TYPE *pxHigherPriorityTaskWoken,
+ portBASE_TYPE xCopyPosition
+ );
+ </pre>
+ *
+ * It is preferred that the macros xQueueSendFromISR(),
+ * xQueueSendToFrontFromISR() and xQueueSendToBackFromISR() be used in place
+ * of calling this function directly.
+ *
+ * Post an item on a queue. It is safe to use this function from within an
+ * interrupt service routine.
+ *
+ * Items are queued by copy not reference so it is preferable to only
+ * queue small items, especially when called from an ISR. In most cases
+ * it would be preferable to store a pointer to the item being queued.
+ *
+ * @param xQueue The handle to the queue on which the item is to be posted.
+ *
+ * @param pvItemToQueue A pointer to the item that is to be placed on the
+ * queue. The size of the items the queue will hold was defined when the
+ * queue was created, so this many bytes will be copied from pvItemToQueue
+ * into the queue storage area.
+ *
+ * @param pxHigherPriorityTaskWoken xQueueGenericSendFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task. If xQueueGenericSendFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @param xCopyPosition Can take the value queueSEND_TO_BACK to place the
+ * item at the back of the queue, or queueSEND_TO_FRONT to place the item
+ * at the front of the queue (for high priority messages).
+ *
+ * @return pdTRUE if the data was successfully sent to the queue, otherwise
+ * errQUEUE_FULL.
+ *
+ * Example usage for buffered IO (where the ISR can obtain more than one value
+ * per call):
+ <pre>
+ void vBufferISR( void )
+ {
+ char cIn;
+ portBASE_TYPE xHigherPriorityTaskWokenByPost;
+
+ // We have not woken a task at the start of the ISR.
+ xHigherPriorityTaskWokenByPost = pdFALSE;
+
+ // Loop until the buffer is empty.
+ do
+ {
+ // Obtain a byte from the buffer.
+ cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+ // Post each byte.
+ xQueueGenericSendFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWokenByPost, queueSEND_TO_BACK );
+
+ } while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+ // Now the buffer is empty we can switch context if necessary. Note that the
+ // name of the yield function required is port specific.
+ if( xHigherPriorityTaskWokenByPost )
+ {
+ taskYIELD_YIELD_FROM_ISR();
+ }
+ }
+ </pre>
+ *
+ * \defgroup xQueueSendFromISR xQueueSendFromISR
+ * \ingroup QueueManagement
+ */
+signed portBASE_TYPE xQueueGenericSendFromISR( xQueueHandle pxQueue, const void * const pvItemToQueue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portBASE_TYPE xCopyPosition );
+
+/**
+ * queue. h
+ * <pre>
+ portBASE_TYPE xQueueReceiveFromISR(
+ xQueueHandle pxQueue,
+ void *pvBuffer,
+ portBASE_TYPE *pxTaskWoken
+ );
+ * </pre>
+ *
+ * Receive an item from a queue. It is safe to use this function from within an
+ * interrupt service routine.
+ *
+ * @param pxQueue The handle to the queue from which the item is to be
+ * received.
+ *
+ * @param pvBuffer Pointer to the buffer into which the received item will
+ * be copied.
+ *
+ * @param pxTaskWoken A task may be blocked waiting for space to become
+ * available on the queue. If xQueueReceiveFromISR causes such a task to
+ * unblock *pxTaskWoken will get set to pdTRUE, otherwise *pxTaskWoken will
+ * remain unchanged.
+ *
+ * @return pdTRUE if an item was successfully received from the queue,
+ * otherwise pdFALSE.
+ *
+ * Example usage:
+ <pre>
+
+ xQueueHandle xQueue;
+
+ // Function to create a queue and post some values.
+ void vAFunction( void *pvParameters )
+ {
+ char cValueToPost;
+ const portTickType xBlockTime = ( portTickType )0xff;
+
+ // Create a queue capable of containing 10 characters.
+ xQueue = xQueueCreate( 10, sizeof( char ) );
+ if( xQueue == 0 )
+ {
+ // Failed to create the queue.
+ }
+
+ // ...
+
+ // Post some characters that will be used within an ISR. If the queue
+ // is full then this task will block for xBlockTime ticks.
+ cValueToPost = 'a';
+ xQueueSend( xQueue, ( void * ) &cValueToPost, xBlockTime );
+ cValueToPost = 'b';
+ xQueueSend( xQueue, ( void * ) &cValueToPost, xBlockTime );
+
+ // ... keep posting characters ... this task may block when the queue
+ // becomes full.
+
+ cValueToPost = 'c';
+ xQueueSend( xQueue, ( void * ) &cValueToPost, xBlockTime );
+ }
+
+ // ISR that outputs all the characters received on the queue.
+ void vISR_Routine( void )
+ {
+ portBASE_TYPE xTaskWokenByReceive = pdFALSE;
+ char cRxedChar;
+
+ while( xQueueReceiveFromISR( xQueue, ( void * ) &cRxedChar, &xTaskWokenByReceive) )
+ {
+ // A character was received. Output the character now.
+ vOutputCharacter( cRxedChar );
+
+ // If removing the character from the queue woke the task that was
+ // posting onto the queue cTaskWokenByReceive will have been set to
+ // pdTRUE. No matter how many times this loop iterates only one
+ // task will be woken.
+ }
+
+ if( cTaskWokenByPost != ( char ) pdFALSE;
+ {
+ taskYIELD ();
+ }
+ }
+ </pre>
+ * \defgroup xQueueReceiveFromISR xQueueReceiveFromISR
+ * \ingroup QueueManagement
+ */
+signed portBASE_TYPE xQueueReceiveFromISR( xQueueHandle pxQueue, void * const pvBuffer, signed portBASE_TYPE *pxTaskWoken );
+
+/*
+ * Utilities to query queue that are safe to use from an ISR. These utilities
+ * should be used only from witin an ISR, or within a critical section.
+ */
+signed portBASE_TYPE xQueueIsQueueEmptyFromISR( const xQueueHandle pxQueue );
+signed portBASE_TYPE xQueueIsQueueFullFromISR( const xQueueHandle pxQueue );
+unsigned portBASE_TYPE uxQueueMessagesWaitingFromISR( const xQueueHandle pxQueue );
+
+
+/*
+ * xQueueAltGenericSend() is an alternative version of xQueueGenericSend().
+ * Likewise xQueueAltGenericReceive() is an alternative version of
+ * xQueueGenericReceive().
+ *
+ * The source code that implements the alternative (Alt) API is much
+ * simpler because it executes everything from within a critical section.
+ * This is the approach taken by many other RTOSes, but FreeRTOS.org has the
+ * preferred fully featured API too. The fully featured API has more
+ * complex code that takes longer to execute, but makes much less use of
+ * critical sections. Therefore the alternative API sacrifices interrupt
+ * responsiveness to gain execution speed, whereas the fully featured API
+ * sacrifices execution speed to ensure better interrupt responsiveness.
+ */
+signed portBASE_TYPE xQueueAltGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition );
+signed portBASE_TYPE xQueueAltGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking );
+#define xQueueAltSendToFront( xQueue, pvItemToQueue, xTicksToWait ) xQueueAltGenericSend( xQueue, pvItemToQueue, xTicksToWait, queueSEND_TO_FRONT )
+#define xQueueAltSendToBack( xQueue, pvItemToQueue, xTicksToWait ) xQueueAltGenericSend( xQueue, pvItemToQueue, xTicksToWait, queueSEND_TO_BACK )
+#define xQueueAltReceive( xQueue, pvBuffer, xTicksToWait ) xQueueAltGenericReceive( xQueue, pvBuffer, xTicksToWait, pdFALSE )
+#define xQueueAltPeek( xQueue, pvBuffer, xTicksToWait ) xQueueAltGenericReceive( xQueue, pvBuffer, xTicksToWait, pdTRUE )
+
+/*
+ * The functions defined above are for passing data to and from tasks. The
+ * functions below are the equivalents for passing data to and from
+ * co-routines.
+ *
+ * These functions are called from the co-routine macro implementation and
+ * should not be called directly from application code. Instead use the macro
+ * wrappers defined within croutine.h.
+ */
+signed portBASE_TYPE xQueueCRSendFromISR( xQueueHandle pxQueue, const void *pvItemToQueue, signed portBASE_TYPE xCoRoutinePreviouslyWoken );
+signed portBASE_TYPE xQueueCRReceiveFromISR( xQueueHandle pxQueue, void *pvBuffer, signed portBASE_TYPE *pxTaskWoken );
+signed portBASE_TYPE xQueueCRSend( xQueueHandle pxQueue, const void *pvItemToQueue, portTickType xTicksToWait );
+signed portBASE_TYPE xQueueCRReceive( xQueueHandle pxQueue, void *pvBuffer, portTickType xTicksToWait );
+
+/*
+ * For internal use only. Use xSemaphoreCreateMutex() or
+ * xSemaphoreCreateCounting() instead of calling these functions directly.
+ */
+xQueueHandle xQueueCreateMutex( void );
+xQueueHandle xQueueCreateCountingSemaphore( unsigned portBASE_TYPE uxCountValue, unsigned portBASE_TYPE uxInitialCount );
+
+/*
+ * For internal use only. Use xSemaphoreTakeMutexRecursive() or
+ * xSemaphoreGiveMutexRecursive() instead of calling these functions directly.
+ */
+portBASE_TYPE xQueueTakeMutexRecursive( xQueueHandle xMutex, portTickType xBlockTime );
+portBASE_TYPE xQueueGiveMutexRecursive( xQueueHandle xMutex );
+
+/*
+ * The registry is provided as a means for kernel aware debuggers to
+ * locate queues, semaphores and mutexes. Call vQueueAddToRegistry() add
+ * a queue, semaphore or mutex handle to the registry if you want the handle
+ * to be available to a kernel aware debugger. If you are not using a kernel
+ * aware debugger then this function can be ignored.
+ *
+ * configQUEUE_REGISTRY_SIZE defines the maximum number of handles the
+ * registry can hold. configQUEUE_REGISTRY_SIZE must be greater than 0
+ * within FreeRTOSConfig.h for the registry to be available. Its value
+ * does not effect the number of queues, semaphores and mutexes that can be
+ * created - just the number that the registry can hold.
+ *
+ * @param xQueue The handle of the queue being added to the registry. This
+ * is the handle returned by a call to xQueueCreate(). Semaphore and mutex
+ * handles can also be passed in here.
+ *
+ * @param pcName The name to be associated with the handle. This is the
+ * name that the kernel aware debugger will display.
+ */
+//#if configQUEUE_REGISTRY_SIZE > 0
+ void vQueueAddToRegistry( xQueueHandle xQueue, signed char *pcName );
+//#endif
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* QUEUE_H */
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/include/semphr.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/include/semphr.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,711 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#ifndef INC_FREERTOS_H
+ #error "#include FreeRTOS.h" must appear in source files before "#include semphr.h"
+#endif
+
+#ifndef SEMAPHORE_H
+#define SEMAPHORE_H
+
+#include "queue.h"
+
+typedef xQueueHandle xSemaphoreHandle;
+
+#define semBINARY_SEMAPHORE_QUEUE_LENGTH ( ( unsigned char ) 1 )
+#define semSEMAPHORE_QUEUE_ITEM_LENGTH ( ( unsigned char ) 0 )
+#define semGIVE_BLOCK_TIME ( ( portTickType ) 0 )
+
+
+/**
+ * semphr. h
+ * <pre>vSemaphoreCreateBinary( xSemaphoreHandle xSemaphore )</pre>
+ *
+ * <i>Macro</i> that implements a semaphore by using the existing queue mechanism.
+ * The queue length is 1 as this is a binary semaphore. The data size is 0
+ * as we don't want to actually store any data - we just want to know if the
+ * queue is empty or full.
+ *
+ * This type of semaphore can be used for pure synchronisation between tasks or
+ * between an interrupt and a task. The semaphore need not be given back once
+ * obtained, so one task/interrupt can continuously 'give' the semaphore while
+ * another continuously 'takes' the semaphore. For this reason this type of
+ * semaphore does not use a priority inheritance mechanism. For an alternative
+ * that does use priority inheritance see xSemaphoreCreateMutex().
+ *
+ * @param xSemaphore Handle to the created semaphore. Should be of type xSemaphoreHandle.
+ *
+ * Example usage:
+ <pre>
+ xSemaphoreHandle xSemaphore;
+
+ void vATask( void * pvParameters )
+ {
+ // Semaphore cannot be used before a call to vSemaphoreCreateBinary ().
+ // This is a macro so pass the variable in directly.
+ vSemaphoreCreateBinary( xSemaphore );
+
+ if( xSemaphore != NULL )
+ {
+ // The semaphore was created successfully.
+ // The semaphore can now be used.
+ }
+ }
+ </pre>
+ * \defgroup vSemaphoreCreateBinary vSemaphoreCreateBinary
+ * \ingroup Semaphores
+ */
+#define vSemaphoreCreateBinary( xSemaphore ) { \
+ xSemaphore = xQueueCreate( ( unsigned portBASE_TYPE ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH ); \
+ if( xSemaphore != NULL ) \
+ { \
+ xSemaphoreGive( xSemaphore ); \
+ } \
+ }
+
+/**
+ * semphr. h
+ * <pre>xSemaphoreTake(
+ * xSemaphoreHandle xSemaphore,
+ * portTickType xBlockTime
+ * )</pre>
+ *
+ * <i>Macro</i> to obtain a semaphore. The semaphore must have previously been
+ * created with a call to vSemaphoreCreateBinary(), xSemaphoreCreateMutex() or
+ * xSemaphoreCreateCounting().
+ *
+ * @param xSemaphore A handle to the semaphore being taken - obtained when
+ * the semaphore was created.
+ *
+ * @param xBlockTime The time in ticks to wait for the semaphore to become
+ * available. The macro portTICK_RATE_MS can be used to convert this to a
+ * real time. A block time of zero can be used to poll the semaphore. A block
+ * time of portMAX_DELAY can be used to block indefinitely (provided
+ * INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h).
+ *
+ * @return pdTRUE if the semaphore was obtained. pdFALSE
+ * if xBlockTime expired without the semaphore becoming available.
+ *
+ * Example usage:
+ <pre>
+ xSemaphoreHandle xSemaphore = NULL;
+
+ // A task that creates a semaphore.
+ void vATask( void * pvParameters )
+ {
+ // Create the semaphore to guard a shared resource.
+ vSemaphoreCreateBinary( xSemaphore );
+ }
+
+ // A task that uses the semaphore.
+ void vAnotherTask( void * pvParameters )
+ {
+ // ... Do other things.
+
+ if( xSemaphore != NULL )
+ {
+ // See if we can obtain the semaphore. If the semaphore is not available
+ // wait 10 ticks to see if it becomes free.
+ if( xSemaphoreTake( xSemaphore, ( portTickType ) 10 ) == pdTRUE )
+ {
+ // We were able to obtain the semaphore and can now access the
+ // shared resource.
+
+ // ...
+
+ // We have finished accessing the shared resource. Release the
+ // semaphore.
+ xSemaphoreGive( xSemaphore );
+ }
+ else
+ {
+ // We could not obtain the semaphore and can therefore not access
+ // the shared resource safely.
+ }
+ }
+ }
+ </pre>
+ * \defgroup xSemaphoreTake xSemaphoreTake
+ * \ingroup Semaphores
+ */
+#define xSemaphoreTake( xSemaphore, xBlockTime ) xQueueGenericReceive( ( xQueueHandle ) xSemaphore, NULL, xBlockTime, pdFALSE )
+
+/**
+ * semphr. h
+ * xSemaphoreTakeRecursive(
+ * xSemaphoreHandle xMutex,
+ * portTickType xBlockTime
+ * )
+ *
+ * <i>Macro</i> to recursively obtain, or 'take', a mutex type semaphore.
+ * The mutex must have previously been created using a call to
+ * xSemaphoreCreateRecursiveMutex();
+ *
+ * configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this
+ * macro to be available.
+ *
+ * This macro must not be used on mutexes created using xSemaphoreCreateMutex().
+ *
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex
+ * doesn't become available again until the owner has called
+ * xSemaphoreGiveRecursive() for each successful 'take' request. For example,
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will
+ * not be available to any other task until it has also 'given' the mutex back
+ * exactly five times.
+ *
+ * @param xMutex A handle to the mutex being obtained. This is the
+ * handle returned by xSemaphoreCreateRecursiveMutex();
+ *
+ * @param xBlockTime The time in ticks to wait for the semaphore to become
+ * available. The macro portTICK_RATE_MS can be used to convert this to a
+ * real time. A block time of zero can be used to poll the semaphore. If
+ * the task already owns the semaphore then xSemaphoreTakeRecursive() will
+ * return immediately no matter what the value of xBlockTime.
+ *
+ * @return pdTRUE if the semaphore was obtained. pdFALSE if xBlockTime
+ * expired without the semaphore becoming available.
+ *
+ * Example usage:
+ <pre>
+ xSemaphoreHandle xMutex = NULL;
+
+ // A task that creates a mutex.
+ void vATask( void * pvParameters )
+ {
+ // Create the mutex to guard a shared resource.
+ xMutex = xSemaphoreCreateRecursiveMutex();
+ }
+
+ // A task that uses the mutex.
+ void vAnotherTask( void * pvParameters )
+ {
+ // ... Do other things.
+
+ if( xMutex != NULL )
+ {
+ // See if we can obtain the mutex. If the mutex is not available
+ // wait 10 ticks to see if it becomes free.
+ if( xSemaphoreTakeRecursive( xSemaphore, ( portTickType ) 10 ) == pdTRUE )
+ {
+ // We were able to obtain the mutex and can now access the
+ // shared resource.
+
+ // ...
+ // For some reason due to the nature of the code further calls to
+ // xSemaphoreTakeRecursive() are made on the same mutex. In real
+ // code these would not be just sequential calls as this would make
+ // no sense. Instead the calls are likely to be buried inside
+ // a more complex call structure.
+ xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 );
+ xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 );
+
+ // The mutex has now been 'taken' three times, so will not be
+ // available to another task until it has also been given back
+ // three times. Again it is unlikely that real code would have
+ // these calls sequentially, but instead buried in a more complex
+ // call structure. This is just for illustrative purposes.
+ xSemaphoreGiveRecursive( xMutex );
+ xSemaphoreGiveRecursive( xMutex );
+ xSemaphoreGiveRecursive( xMutex );
+
+ // Now the mutex can be taken by other tasks.
+ }
+ else
+ {
+ // We could not obtain the mutex and can therefore not access
+ // the shared resource safely.
+ }
+ }
+ }
+ </pre>
+ * \defgroup xSemaphoreTakeRecursive xSemaphoreTakeRecursive
+ * \ingroup Semaphores
+ */
+#define xSemaphoreTakeRecursive( xMutex, xBlockTime ) xQueueTakeMutexRecursive( xMutex, xBlockTime )
+
+
+/*
+ * xSemaphoreAltTake() is an alternative version of xSemaphoreTake().
+ *
+ * The source code that implements the alternative (Alt) API is much
+ * simpler because it executes everything from within a critical section.
+ * This is the approach taken by many other RTOSes, but FreeRTOS.org has the
+ * preferred fully featured API too. The fully featured API has more
+ * complex code that takes longer to execute, but makes much less use of
+ * critical sections. Therefore the alternative API sacrifices interrupt
+ * responsiveness to gain execution speed, whereas the fully featured API
+ * sacrifices execution speed to ensure better interrupt responsiveness.
+ */
+#define xSemaphoreAltTake( xSemaphore, xBlockTime ) xQueueAltGenericReceive( ( xQueueHandle ) xSemaphore, NULL, xBlockTime, pdFALSE )
+
+/**
+ * semphr. h
+ * <pre>xSemaphoreGive( xSemaphoreHandle xSemaphore )</pre>
+ *
+ * <i>Macro</i> to release a semaphore. The semaphore must have previously been
+ * created with a call to vSemaphoreCreateBinary(), xSemaphoreCreateMutex() or
+ * xSemaphoreCreateCounting(). and obtained using sSemaphoreTake().
+ *
+ * This macro must not be used from an ISR. See xSemaphoreGiveFromISR () for
+ * an alternative which can be used from an ISR.
+ *
+ * This macro must also not be used on semaphores created using
+ * xSemaphoreCreateRecursiveMutex().
+ *
+ * @param xSemaphore A handle to the semaphore being released. This is the
+ * handle returned when the semaphore was created.
+ *
+ * @return pdTRUE if the semaphore was released. pdFALSE if an error occurred.
+ * Semaphores are implemented using queues. An error can occur if there is
+ * no space on the queue to post a message - indicating that the
+ * semaphore was not first obtained correctly.
+ *
+ * Example usage:
+ <pre>
+ xSemaphoreHandle xSemaphore = NULL;
+
+ void vATask( void * pvParameters )
+ {
+ // Create the semaphore to guard a shared resource.
+ vSemaphoreCreateBinary( xSemaphore );
+
+ if( xSemaphore != NULL )
+ {
+ if( xSemaphoreGive( xSemaphore ) != pdTRUE )
+ {
+ // We would expect this call to fail because we cannot give
+ // a semaphore without first "taking" it!
+ }
+
+ // Obtain the semaphore - don't block if the semaphore is not
+ // immediately available.
+ if( xSemaphoreTake( xSemaphore, ( portTickType ) 0 ) )
+ {
+ // We now have the semaphore and can access the shared resource.
+
+ // ...
+
+ // We have finished accessing the shared resource so can free the
+ // semaphore.
+ if( xSemaphoreGive( xSemaphore ) != pdTRUE )
+ {
+ // We would not expect this call to fail because we must have
+ // obtained the semaphore to get here.
+ }
+ }
+ }
+ }
+ </pre>
+ * \defgroup xSemaphoreGive xSemaphoreGive
+ * \ingroup Semaphores
+ */
+#define xSemaphoreGive( xSemaphore ) xQueueGenericSend( ( xQueueHandle ) xSemaphore, NULL, semGIVE_BLOCK_TIME, queueSEND_TO_BACK )
+
+/**
+ * semphr. h
+ * <pre>xSemaphoreGiveRecursive( xSemaphoreHandle xMutex )</pre>
+ *
+ * <i>Macro</i> to recursively release, or 'give', a mutex type semaphore.
+ * The mutex must have previously been created using a call to
+ * xSemaphoreCreateRecursiveMutex();
+ *
+ * configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this
+ * macro to be available.
+ *
+ * This macro must not be used on mutexes created using xSemaphoreCreateMutex().
+ *
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex
+ * doesn't become available again until the owner has called
+ * xSemaphoreGiveRecursive() for each successful 'take' request. For example,
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will
+ * not be available to any other task until it has also 'given' the mutex back
+ * exactly five times.
+ *
+ * @param xMutex A handle to the mutex being released, or 'given'. This is the
+ * handle returned by xSemaphoreCreateMutex();
+ *
+ * @return pdTRUE if the semaphore was given.
+ *
+ * Example usage:
+ <pre>
+ xSemaphoreHandle xMutex = NULL;
+
+ // A task that creates a mutex.
+ void vATask( void * pvParameters )
+ {
+ // Create the mutex to guard a shared resource.
+ xMutex = xSemaphoreCreateRecursiveMutex();
+ }
+
+ // A task that uses the mutex.
+ void vAnotherTask( void * pvParameters )
+ {
+ // ... Do other things.
+
+ if( xMutex != NULL )
+ {
+ // See if we can obtain the mutex. If the mutex is not available
+ // wait 10 ticks to see if it becomes free.
+ if( xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 ) == pdTRUE )
+ {
+ // We were able to obtain the mutex and can now access the
+ // shared resource.
+
+ // ...
+ // For some reason due to the nature of the code further calls to
+ // xSemaphoreTakeRecursive() are made on the same mutex. In real
+ // code these would not be just sequential calls as this would make
+ // no sense. Instead the calls are likely to be buried inside
+ // a more complex call structure.
+ xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 );
+ xSemaphoreTakeRecursive( xMutex, ( portTickType ) 10 );
+
+ // The mutex has now been 'taken' three times, so will not be
+ // available to another task until it has also been given back
+ // three times. Again it is unlikely that real code would have
+ // these calls sequentially, it would be more likely that the calls
+ // to xSemaphoreGiveRecursive() would be called as a call stack
+ // unwound. This is just for demonstrative purposes.
+ xSemaphoreGiveRecursive( xMutex );
+ xSemaphoreGiveRecursive( xMutex );
+ xSemaphoreGiveRecursive( xMutex );
+
+ // Now the mutex can be taken by other tasks.
+ }
+ else
+ {
+ // We could not obtain the mutex and can therefore not access
+ // the shared resource safely.
+ }
+ }
+ }
+ </pre>
+ * \defgroup xSemaphoreGiveRecursive xSemaphoreGiveRecursive
+ * \ingroup Semaphores
+ */
+#define xSemaphoreGiveRecursive( xMutex ) xQueueGiveMutexRecursive( xMutex )
+
+/*
+ * xSemaphoreAltGive() is an alternative version of xSemaphoreGive().
+ *
+ * The source code that implements the alternative (Alt) API is much
+ * simpler because it executes everything from within a critical section.
+ * This is the approach taken by many other RTOSes, but FreeRTOS.org has the
+ * preferred fully featured API too. The fully featured API has more
+ * complex code that takes longer to execute, but makes much less use of
+ * critical sections. Therefore the alternative API sacrifices interrupt
+ * responsiveness to gain execution speed, whereas the fully featured API
+ * sacrifices execution speed to ensure better interrupt responsiveness.
+ */
+#define xSemaphoreAltGive( xSemaphore ) xQueueAltGenericSend( ( xQueueHandle ) xSemaphore, NULL, semGIVE_BLOCK_TIME, queueSEND_TO_BACK )
+
+/**
+ * semphr. h
+ * <pre>
+ xSemaphoreGiveFromISR(
+ xSemaphoreHandle xSemaphore,
+ signed portBASE_TYPE *pxHigherPriorityTaskWoken
+ )</pre>
+ *
+ * <i>Macro</i> to release a semaphore. The semaphore must have previously been
+ * created with a call to vSemaphoreCreateBinary() or xSemaphoreCreateCounting().
+ *
+ * Mutex type semaphores (those created using a call to xSemaphoreCreateMutex())
+ * must not be used with this macro.
+ *
+ * This macro can be used from an ISR.
+ *
+ * @param xSemaphore A handle to the semaphore being released. This is the
+ * handle returned when the semaphore was created.
+ *
+ * @param pxHigherPriorityTaskWoken xSemaphoreGiveFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if giving the semaphore caused a task
+ * to unblock, and the unblocked task has a priority higher than the currently
+ * running task. If xSemaphoreGiveFromISR() sets this value to pdTRUE then
+ * a context switch should be requested before the interrupt is exited.
+ *
+ * @return pdTRUE if the semaphore was successfully given, otherwise errQUEUE_FULL.
+ *
+ * Example usage:
+ <pre>
+ \#define LONG_TIME 0xffff
+ \#define TICKS_TO_WAIT 10
+ xSemaphoreHandle xSemaphore = NULL;
+
+ // Repetitive task.
+ void vATask( void * pvParameters )
+ {
+ for( ;; )
+ {
+ // We want this task to run every 10 ticks of a timer. The semaphore
+ // was created before this task was started.
+
+ // Block waiting for the semaphore to become available.
+ if( xSemaphoreTake( xSemaphore, LONG_TIME ) == pdTRUE )
+ {
+ // It is time to execute.
+
+ // ...
+
+ // We have finished our task. Return to the top of the loop where
+ // we will block on the semaphore until it is time to execute
+ // again. Note when using the semaphore for synchronisation with an
+ // ISR in this manner there is no need to 'give' the semaphore back.
+ }
+ }
+ }
+
+ // Timer ISR
+ void vTimerISR( void * pvParameters )
+ {
+ static unsigned char ucLocalTickCount = 0;
+ static signed portBASE_TYPE xHigherPriorityTaskWoken;
+
+ // A timer tick has occurred.
+
+ // ... Do other time functions.
+
+ // Is it time for vATask () to run?
+ xHigherPriorityTaskWoken = pdFALSE;
+ ucLocalTickCount++;
+ if( ucLocalTickCount >= TICKS_TO_WAIT )
+ {
+ // Unblock the task by releasing the semaphore.
+ xSemaphoreGiveFromISR( xSemaphore, &xHigherPriorityTaskWoken );
+
+ // Reset the count so we release the semaphore again in 10 ticks time.
+ ucLocalTickCount = 0;
+ }
+
+ if( xHigherPriorityTaskWoken != pdFALSE )
+ {
+ // We can force a context switch here. Context switching from an
+ // ISR uses port specific syntax. Check the demo task for your port
+ // to find the syntax required.
+ }
+ }
+ </pre>
+ * \defgroup xSemaphoreGiveFromISR xSemaphoreGiveFromISR
+ * \ingroup Semaphores
+ */
+#define xSemaphoreGiveFromISR( xSemaphore, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueueHandle ) xSemaphore, NULL, pxHigherPriorityTaskWoken, queueSEND_TO_BACK )
+
+/**
+ * semphr. h
+ * <pre>xSemaphoreHandle xSemaphoreCreateMutex( void )</pre>
+ *
+ * <i>Macro</i> that implements a mutex semaphore by using the existing queue
+ * mechanism.
+ *
+ * Mutexes created using this macro can be accessed using the xSemaphoreTake()
+ * and xSemaphoreGive() macros. The xSemaphoreTakeRecursive() and
+ * xSemaphoreGiveRecursive() macros should not be used.
+ *
+ * This type of semaphore uses a priority inheritance mechanism so a task
+ * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the
+ * semaphore it is no longer required.
+ *
+ * Mutex type semaphores cannot be used from within interrupt service routines.
+ *
+ * See vSemaphoreCreateBinary() for an alternative implementation that can be
+ * used for pure synchronisation (where one task or interrupt always 'gives' the
+ * semaphore and another always 'takes' the semaphore) and from within interrupt
+ * service routines.
+ *
+ * @return xSemaphore Handle to the created mutex semaphore. Should be of type
+ * xSemaphoreHandle.
+ *
+ * Example usage:
+ <pre>
+ xSemaphoreHandle xSemaphore;
+
+ void vATask( void * pvParameters )
+ {
+ // Semaphore cannot be used before a call to xSemaphoreCreateMutex().
+ // This is a macro so pass the variable in directly.
+ xSemaphore = xSemaphoreCreateMutex();
+
+ if( xSemaphore != NULL )
+ {
+ // The semaphore was created successfully.
+ // The semaphore can now be used.
+ }
+ }
+ </pre>
+ * \defgroup vSemaphoreCreateMutex vSemaphoreCreateMutex
+ * \ingroup Semaphores
+ */
+#define xSemaphoreCreateMutex() xQueueCreateMutex()
+
+
+/**
+ * semphr. h
+ * <pre>xSemaphoreHandle xSemaphoreCreateRecursiveMutex( void )</pre>
+ *
+ * <i>Macro</i> that implements a recursive mutex by using the existing queue
+ * mechanism.
+ *
+ * Mutexes created using this macro can be accessed using the
+ * xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() macros. The
+ * xSemaphoreTake() and xSemaphoreGive() macros should not be used.
+ *
+ * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex
+ * doesn't become available again until the owner has called
+ * xSemaphoreGiveRecursive() for each successful 'take' request. For example,
+ * if a task successfully 'takes' the same mutex 5 times then the mutex will
+ * not be available to any other task until it has also 'given' the mutex back
+ * exactly five times.
+ *
+ * This type of semaphore uses a priority inheritance mechanism so a task
+ * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the
+ * semaphore it is no longer required.
+ *
+ * Mutex type semaphores cannot be used from within interrupt service routines.
+ *
+ * See vSemaphoreCreateBinary() for an alternative implementation that can be
+ * used for pure synchronisation (where one task or interrupt always 'gives' the
+ * semaphore and another always 'takes' the semaphore) and from within interrupt
+ * service routines.
+ *
+ * @return xSemaphore Handle to the created mutex semaphore. Should be of type
+ * xSemaphoreHandle.
+ *
+ * Example usage:
+ <pre>
+ xSemaphoreHandle xSemaphore;
+
+ void vATask( void * pvParameters )
+ {
+ // Semaphore cannot be used before a call to xSemaphoreCreateMutex().
+ // This is a macro so pass the variable in directly.
+ xSemaphore = xSemaphoreCreateRecursiveMutex();
+
+ if( xSemaphore != NULL )
+ {
+ // The semaphore was created successfully.
+ // The semaphore can now be used.
+ }
+ }
+ </pre>
+ * \defgroup vSemaphoreCreateMutex vSemaphoreCreateMutex
+ * \ingroup Semaphores
+ */
+#define xSemaphoreCreateRecursiveMutex() xQueueCreateMutex()
+
+/**
+ * semphr. h
+ * <pre>xSemaphoreHandle xSemaphoreCreateCounting( unsigned portBASE_TYPE uxMaxCount, unsigned portBASE_TYPE uxInitialCount )</pre>
+ *
+ * <i>Macro</i> that creates a counting semaphore by using the existing
+ * queue mechanism.
+ *
+ * Counting semaphores are typically used for two things:
+ *
+ * 1) Counting events.
+ *
+ * In this usage scenario an event handler will 'give' a semaphore each time
+ * an event occurs (incrementing the semaphore count value), and a handler
+ * task will 'take' a semaphore each time it processes an event
+ * (decrementing the semaphore count value). The count value is therefore
+ * the difference between the number of events that have occurred and the
+ * number that have been processed. In this case it is desirable for the
+ * initial count value to be zero.
+ *
+ * 2) Resource management.
+ *
+ * In this usage scenario the count value indicates the number of resources
+ * available. To obtain control of a resource a task must first obtain a
+ * semaphore - decrementing the semaphore count value. When the count value
+ * reaches zero there are no free resources. When a task finishes with the
+ * resource it 'gives' the semaphore back - incrementing the semaphore count
+ * value. In this case it is desirable for the initial count value to be
+ * equal to the maximum count value, indicating that all resources are free.
+ *
+ * @param uxMaxCount The maximum count value that can be reached. When the
+ * semaphore reaches this value it can no longer be 'given'.
+ *
+ * @param uxInitialCount The count value assigned to the semaphore when it is
+ * created.
+ *
+ * @return Handle to the created semaphore. Null if the semaphore could not be
+ * created.
+ *
+ * Example usage:
+ <pre>
+ xSemaphoreHandle xSemaphore;
+
+ void vATask( void * pvParameters )
+ {
+ xSemaphoreHandle xSemaphore = NULL;
+
+ // Semaphore cannot be used before a call to xSemaphoreCreateCounting().
+ // The max value to which the semaphore can count should be 10, and the
+ // initial value assigned to the count should be 0.
+ xSemaphore = xSemaphoreCreateCounting( 10, 0 );
+
+ if( xSemaphore != NULL )
+ {
+ // The semaphore was created successfully.
+ // The semaphore can now be used.
+ }
+ }
+ </pre>
+ * \defgroup xSemaphoreCreateCounting xSemaphoreCreateCounting
+ * \ingroup Semaphores
+ */
+#define xSemaphoreCreateCounting( uxMaxCount, uxInitialCount ) xQueueCreateCountingSemaphore( uxMaxCount, uxInitialCount )
+
+
+#endif /* SEMAPHORE_H */
+
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/include/task.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/include/task.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,1267 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+
+#ifndef INC_FREERTOS_H
+ #error "#include FreeRTOS.h" must appear in source files before "#include task.h"
+#endif
+
+
+
+#ifndef TASK_H
+#define TASK_H
+
+#include "portable.h"
+#include "list.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * MACROS AND DEFINITIONS
+ *----------------------------------------------------------*/
+
+#define tskKERNEL_VERSION_NUMBER "V6.0.3"
+
+/**
+ * task. h
+ *
+ * Type by which tasks are referenced. For example, a call to xTaskCreate
+ * returns (via a pointer parameter) an xTaskHandle variable that can then
+ * be used as a parameter to vTaskDelete to delete the task.
+ *
+ * \page xTaskHandle xTaskHandle
+ * \ingroup Tasks
+ */
+typedef void * xTaskHandle;
+
+/*
+ * Used internally only.
+ */
+typedef struct xTIME_OUT
+{
+ portBASE_TYPE xOverflowCount;
+ portTickType xTimeOnEntering;
+} xTimeOutType;
+
+/*
+ * Defines the memory ranges allocated to the task when an MPU is used.
+ */
+typedef struct xMEMORY_REGION
+{
+ void *pvBaseAddress;
+ unsigned long ulLengthInBytes;
+ unsigned long ulParameters;
+} xMemoryRegion;
+
+#if 0
+// modified by K.Arai Oct. 28th, 2010
+// due to compile error!
+/*
+ * Parameters required to create an MPU protected task.
+ */
+typedef struct xTASK_PARAMTERS
+{
+ pdTASK_CODE pvTaskCode;
+ const signed char * const pcName;
+ unsigned short usStackDepth;
+ void *pvParameters;
+ unsigned portBASE_TYPE uxPriority;
+ portSTACK_TYPE *puxStackBuffer;
+ xMemoryRegion xRegions[ portNUM_CONFIGURABLE_REGIONS ];
+} xTaskParameters;
+#endif
+
+/*
+ * Defines the priority used by the idle task. This must not be modified.
+ *
+ * \ingroup TaskUtils
+ */
+#define tskIDLE_PRIORITY ( ( unsigned portBASE_TYPE ) 0 )
+
+/**
+ * task. h
+ *
+ * Macro for forcing a context switch.
+ *
+ * \page taskYIELD taskYIELD
+ * \ingroup SchedulerControl
+ */
+#define taskYIELD() portYIELD()
+
+/**
+ * task. h
+ *
+ * Macro to mark the start of a critical code region. Preemptive context
+ * switches cannot occur when in a critical region.
+ *
+ * NOTE: This may alter the stack (depending on the portable implementation)
+ * so must be used with care!
+ *
+ * \page taskENTER_CRITICAL taskENTER_CRITICAL
+ * \ingroup SchedulerControl
+ */
+#define taskENTER_CRITICAL() portENTER_CRITICAL()
+
+/**
+ * task. h
+ *
+ * Macro to mark the end of a critical code region. Preemptive context
+ * switches cannot occur when in a critical region.
+ *
+ * NOTE: This may alter the stack (depending on the portable implementation)
+ * so must be used with care!
+ *
+ * \page taskEXIT_CRITICAL taskEXIT_CRITICAL
+ * \ingroup SchedulerControl
+ */
+#define taskEXIT_CRITICAL() portEXIT_CRITICAL()
+
+/**
+ * task. h
+ *
+ * Macro to disable all maskable interrupts.
+ *
+ * \page taskDISABLE_INTERRUPTS taskDISABLE_INTERRUPTS
+ * \ingroup SchedulerControl
+ */
+#define taskDISABLE_INTERRUPTS() portDISABLE_INTERRUPTS()
+
+/**
+ * task. h
+ *
+ * Macro to enable microcontroller interrupts.
+ *
+ * \page taskENABLE_INTERRUPTS taskENABLE_INTERRUPTS
+ * \ingroup SchedulerControl
+ */
+#define taskENABLE_INTERRUPTS() portENABLE_INTERRUPTS()
+
+/* Definitions returned by xTaskGetSchedulerState(). */
+#define taskSCHEDULER_NOT_STARTED 0
+#define taskSCHEDULER_RUNNING 1
+#define taskSCHEDULER_SUSPENDED 2
+
+/*-----------------------------------------------------------
+ * TASK CREATION API
+ *----------------------------------------------------------*/
+
+/**
+ * task. h
+ *<pre>
+ portBASE_TYPE xTaskCreate(
+ pdTASK_CODE pvTaskCode,
+ const char * const pcName,
+ unsigned short usStackDepth,
+ void *pvParameters,
+ unsigned portBASE_TYPE uxPriority,
+ xTaskHandle *pvCreatedTask
+ );</pre>
+ *
+ * Create a new task and add it to the list of tasks that are ready to run.
+ *
+ * xTaskCreate() can only be used to create a task that has unrestricted
+ * access to the entire microcontroller memory map. Systems that include MPU
+ * support can alternatively create an MPU constrained task using
+ * xTaskCreateRestricted().
+ *
+ * @param pvTaskCode Pointer to the task entry function. Tasks
+ * must be implemented to never return (i.e. continuous loop).
+ *
+ * @param pcName A descriptive name for the task. This is mainly used to
+ * facilitate debugging. Max length defined by tskMAX_TASK_NAME_LEN - default
+ * is 16.
+ *
+ * @param usStackDepth The size of the task stack specified as the number of
+ * variables the stack can hold - not the number of bytes. For example, if
+ * the stack is 16 bits wide and usStackDepth is defined as 100, 200 bytes
+ * will be allocated for stack storage.
+ *
+ * @param pvParameters Pointer that will be used as the parameter for the task
+ * being created.
+ *
+ * @param uxPriority The priority at which the task should run. Systems that
+ * include MPU support can optionally create tasks in a privileged (system)
+ * mode by setting bit portPRIVILEGE_BIT of the priority parameter. For
+ * example, to create a privileged task at priority 2 the uxPriority parameter
+ * should be set to ( 2 | portPRIVILEGE_BIT ).
+ *
+ * @param pvCreatedTask Used to pass back a handle by which the created task
+ * can be referenced.
+ *
+ * @return pdPASS if the task was successfully created and added to a ready
+ * list, otherwise an error code defined in the file errors. h
+ *
+ * Example usage:
+ <pre>
+ // Task to be created.
+ void vTaskCode( void * pvParameters )
+ {
+ for( ;; )
+ {
+ // Task code goes here.
+ }
+ }
+
+ // Function that creates a task.
+ void vOtherFunction( void )
+ {
+ static unsigned char ucParameterToPass;
+ xTaskHandle xHandle;
+
+ // Create the task, storing the handle. Note that the passed parameter ucParameterToPass
+ // must exist for the lifetime of the task, so in this case is declared static. If it was just an
+ // an automatic stack variable it might no longer exist, or at least have been corrupted, by the time
+ // the new task attempts to access it.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, &ucParameterToPass, tskIDLE_PRIORITY, &xHandle );
+
+ // Use the handle to delete the task.
+ vTaskDelete( xHandle );
+ }
+ </pre>
+ * \defgroup xTaskCreate xTaskCreate
+ * \ingroup Tasks
+ */
+#define xTaskCreate( pvTaskCode, pcName, usStackDepth, pvParameters, uxPriority, pxCreatedTask ) xTaskGenericCreate( ( pvTaskCode ), ( pcName ), ( usStackDepth ), ( pvParameters ), ( uxPriority ), ( pxCreatedTask ), ( NULL ), ( NULL ) )
+
+/**
+ * task. h
+ *<pre>
+ portBASE_TYPE xTaskCreateRestricted( xTaskParameters *pxTaskDefinition, xTaskHandle *pxCreatedTask );</pre>
+ *
+ * xTaskCreateRestricted() should only be used in systems that include an MPU
+ * implementation.
+ *
+ * Create a new task and add it to the list of tasks that are ready to run.
+ * The function parameters define the memory regions and associated access
+ * permissions allocated to the task.
+ *
+ * @param pxTaskDefinition Pointer to a structure that contains a member
+ * for each of the normal xTaskCreate() parameters (see the xTaskCreate() API
+ * documentation) plus an optional stack buffer and the memory region
+ * definitions.
+ *
+ * @param pxCreatedTask Used to pass back a handle by which the created task
+ * can be referenced.
+ *
+ * @return pdPASS if the task was successfully created and added to a ready
+ * list, otherwise an error code defined in the file errors. h
+ *
+ * Example usage:
+ <pre>
+// Create an xTaskParameters structure that defines the task to be created.
+static const xTaskParameters xCheckTaskParameters =
+{
+ vATask, // pvTaskCode - the function that implements the task.
+ "ATask", // pcName - just a text name for the task to assist debugging.
+ 100, // usStackDepth - the stack size DEFINED IN WORDS.
+ NULL, // pvParameters - passed into the task function as the function parameters.
+ ( 1UL | portPRIVILEGE_BIT ),// uxPriority - task priority, set the portPRIVILEGE_BIT if the task should run in a privileged state.
+ cStackBuffer,// puxStackBuffer - the buffer to be used as the task stack.
+
+ // xRegions - Allocate up to three separate memory regions for access by
+ // the task, with appropriate access permissions. Different processors have
+ // different memory alignment requirements - refer to the FreeRTOS documentation
+ // for full information.
+ {
+ // Base address Length Parameters
+ { cReadWriteArray, 32, portMPU_REGION_READ_WRITE },
+ { cReadOnlyArray, 32, portMPU_REGION_READ_ONLY },
+ { cPrivilegedOnlyAccessArray, 128, portMPU_REGION_PRIVILEGED_READ_WRITE }
+ }
+};
+
+int main( void )
+{
+xTaskHandle xHandle;
+
+ // Create a task from the const structure defined above. The task handle
+ // is requested (the second parameter is not NULL) but in this case just for
+ // demonstration purposes as its not actually used.
+ xTaskCreateRestricted( &xRegTest1Parameters, &xHandle );
+
+ // Start the scheduler.
+ vTaskStartScheduler();
+
+ // Will only get here if there was insufficient memory to create the idle
+ // task.
+ for( ;; );
+}
+ </pre>
+ * \defgroup xTaskCreateRestricted xTaskCreateRestricted
+ * \ingroup Tasks
+ */
+#define xTaskCreateRestricted( x, pxCreatedTask ) xTaskGenericCreate( ((x)->pvTaskCode), ((x)->pcName), ((x)->usStackDepth), ((x)->pvParameters), ((x)->uxPriority), (pxCreatedTask), ((x)->puxStackBuffer), ((x)->xRegions) )
+
+/**
+ * task. h
+ *<pre>
+ void vTaskAllocateMPURegions( xTaskHandle xTask, const xMemoryRegion * const pxRegions );</pre>
+ *
+ * Memory regions are assigned to a restricted task when the task is created by
+ * a call to xTaskCreateRestricted(). These regions can be redefined using
+ * vTaskAllocateMPURegions().
+ *
+ * @param xTask The handle of the task being updated.
+ *
+ * @param xRegions A pointer to an xMemoryRegion structure that contains the
+ * new memory region definitions.
+ *
+ * Example usage:
+ <pre>
+// Define an array of xMemoryRegion structures that configures an MPU region
+// allowing read/write access for 1024 bytes starting at the beginning of the
+// ucOneKByte array. The other two of the maximum 3 definable regions are
+// unused so set to zero.
+static const xMemoryRegion xAltRegions[ portNUM_CONFIGURABLE_REGIONS ] =
+{
+ // Base address Length Parameters
+ { ucOneKByte, 1024, portMPU_REGION_READ_WRITE },
+ { 0, 0, 0 },
+ { 0, 0, 0 }
+};
+
+void vATask( void *pvParameters )
+{
+ // This task was created such that it has access to certain regions of
+ // memory as defined by the MPU configuration. At some point it is
+ // desired that these MPU regions are replaced with that defined in the
+ // xAltRegions const struct above. Use a call to vTaskAllocateMPURegions()
+ // for this purpose. NULL is used as the task handle to indicate that this
+ // function should modify the MPU regions of the calling task.
+ vTaskAllocateMPURegions( NULL, xAltRegions );
+
+ // Now the task can continue its function, but from this point on can only
+ // access its stack and the ucOneKByte array (unless any other statically
+ // defined or shared regions have been declared elsewhere).
+}
+ </pre>
+ * \defgroup xTaskCreateRestricted xTaskCreateRestricted
+ * \ingroup Tasks
+ */
+void vTaskAllocateMPURegions( xTaskHandle xTask, const xMemoryRegion * const pxRegions ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <pre>void vTaskDelete( xTaskHandle pxTask );</pre>
+ *
+ * INCLUDE_vTaskDelete must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Remove a task from the RTOS real time kernels management. The task being
+ * deleted will be removed from all ready, blocked, suspended and event lists.
+ *
+ * NOTE: The idle task is responsible for freeing the kernel allocated
+ * memory from tasks that have been deleted. It is therefore important that
+ * the idle task is not starved of microcontroller processing time if your
+ * application makes any calls to vTaskDelete (). Memory allocated by the
+ * task code is not automatically freed, and should be freed before the task
+ * is deleted.
+ *
+ * See the demo application file death.c for sample code that utilises
+ * vTaskDelete ().
+ *
+ * @param pxTask The handle of the task to be deleted. Passing NULL will
+ * cause the calling task to be deleted.
+ *
+ * Example usage:
+ <pre>
+ void vOtherFunction( void )
+ {
+ xTaskHandle xHandle;
+
+ // Create the task, storing the handle.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+ // Use the handle to delete the task.
+ vTaskDelete( xHandle );
+ }
+ </pre>
+ * \defgroup vTaskDelete vTaskDelete
+ * \ingroup Tasks
+ */
+void vTaskDelete( xTaskHandle pxTask ) PRIVILEGED_FUNCTION;
+
+
+/*-----------------------------------------------------------
+ * TASK CONTROL API
+ *----------------------------------------------------------*/
+
+/**
+ * task. h
+ * <pre>void vTaskDelay( portTickType xTicksToDelay );</pre>
+ *
+ * Delay a task for a given number of ticks. The actual time that the
+ * task remains blocked depends on the tick rate. The constant
+ * portTICK_RATE_MS can be used to calculate real time from the tick
+ * rate - with the resolution of one tick period.
+ *
+ * INCLUDE_vTaskDelay must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ *
+ * vTaskDelay() specifies a time at which the task wishes to unblock relative to
+ * the time at which vTaskDelay() is called. For example, specifying a block
+ * period of 100 ticks will cause the task to unblock 100 ticks after
+ * vTaskDelay() is called. vTaskDelay() does not therefore provide a good method
+ * of controlling the frequency of a cyclical task as the path taken through the
+ * code, as well as other task and interrupt activity, will effect the frequency
+ * at which vTaskDelay() gets called and therefore the time at which the task
+ * next executes. See vTaskDelayUntil() for an alternative API function designed
+ * to facilitate fixed frequency execution. It does this by specifying an
+ * absolute time (rather than a relative time) at which the calling task should
+ * unblock.
+ *
+ * @param xTicksToDelay The amount of time, in tick periods, that
+ * the calling task should block.
+ *
+ * Example usage:
+
+ void vTaskFunction( void * pvParameters )
+ {
+ void vTaskFunction( void * pvParameters )
+ {
+ // Block for 500ms.
+ const portTickType xDelay = 500 / portTICK_RATE_MS;
+
+ for( ;; )
+ {
+ // Simply toggle the LED every 500ms, blocking between each toggle.
+ vToggleLED();
+ vTaskDelay( xDelay );
+ }
+ }
+
+ * \defgroup vTaskDelay vTaskDelay
+ * \ingroup TaskCtrl
+ */
+void vTaskDelay( portTickType xTicksToDelay ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <pre>void vTaskDelayUntil( portTickType *pxPreviousWakeTime, portTickType xTimeIncrement );</pre>
+ *
+ * INCLUDE_vTaskDelayUntil must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Delay a task until a specified time. This function can be used by cyclical
+ * tasks to ensure a constant execution frequency.
+ *
+ * This function differs from vTaskDelay () in one important aspect: vTaskDelay () will
+ * cause a task to block for the specified number of ticks from the time vTaskDelay () is
+ * called. It is therefore difficult to use vTaskDelay () by itself to generate a fixed
+ * execution frequency as the time between a task starting to execute and that task
+ * calling vTaskDelay () may not be fixed [the task may take a different path though the
+ * code between calls, or may get interrupted or preempted a different number of times
+ * each time it executes].
+ *
+ * Whereas vTaskDelay () specifies a wake time relative to the time at which the function
+ * is called, vTaskDelayUntil () specifies the absolute (exact) time at which it wishes to
+ * unblock.
+ *
+ * The constant portTICK_RATE_MS can be used to calculate real time from the tick
+ * rate - with the resolution of one tick period.
+ *
+ * @param pxPreviousWakeTime Pointer to a variable that holds the time at which the
+ * task was last unblocked. The variable must be initialised with the current time
+ * prior to its first use (see the example below). Following this the variable is
+ * automatically updated within vTaskDelayUntil ().
+ *
+ * @param xTimeIncrement The cycle time period. The task will be unblocked at
+ * time *pxPreviousWakeTime + xTimeIncrement. Calling vTaskDelayUntil with the
+ * same xTimeIncrement parameter value will cause the task to execute with
+ * a fixed interface period.
+ *
+ * Example usage:
+ <pre>
+ // Perform an action every 10 ticks.
+ void vTaskFunction( void * pvParameters )
+ {
+ portTickType xLastWakeTime;
+ const portTickType xFrequency = 10;
+
+ // Initialise the xLastWakeTime variable with the current time.
+ xLastWakeTime = xTaskGetTickCount ();
+ for( ;; )
+ {
+ // Wait for the next cycle.
+ vTaskDelayUntil( &xLastWakeTime, xFrequency );
+
+ // Perform action here.
+ }
+ }
+ </pre>
+ * \defgroup vTaskDelayUntil vTaskDelayUntil
+ * \ingroup TaskCtrl
+ */
+void vTaskDelayUntil( portTickType * const pxPreviousWakeTime, portTickType xTimeIncrement ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <pre>unsigned portBASE_TYPE uxTaskPriorityGet( xTaskHandle pxTask );</pre>
+ *
+ * INCLUDE_xTaskPriorityGet must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Obtain the priority of any task.
+ *
+ * @param pxTask Handle of the task to be queried. Passing a NULL
+ * handle results in the priority of the calling task being returned.
+ *
+ * @return The priority of pxTask.
+ *
+ * Example usage:
+ <pre>
+ void vAFunction( void )
+ {
+ xTaskHandle xHandle;
+
+ // Create a task, storing the handle.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+ // ...
+
+ // Use the handle to obtain the priority of the created task.
+ // It was created with tskIDLE_PRIORITY, but may have changed
+ // it itself.
+ if( uxTaskPriorityGet( xHandle ) != tskIDLE_PRIORITY )
+ {
+ // The task has changed it's priority.
+ }
+
+ // ...
+
+ // Is our priority higher than the created task?
+ if( uxTaskPriorityGet( xHandle ) < uxTaskPriorityGet( NULL ) )
+ {
+ // Our priority (obtained using NULL handle) is higher.
+ }
+ }
+ </pre>
+ * \defgroup uxTaskPriorityGet uxTaskPriorityGet
+ * \ingroup TaskCtrl
+ */
+unsigned portBASE_TYPE uxTaskPriorityGet( xTaskHandle pxTask ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <pre>void vTaskPrioritySet( xTaskHandle pxTask, unsigned portBASE_TYPE uxNewPriority );</pre>
+ *
+ * INCLUDE_vTaskPrioritySet must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Set the priority of any task.
+ *
+ * A context switch will occur before the function returns if the priority
+ * being set is higher than the currently executing task.
+ *
+ * @param pxTask Handle to the task for which the priority is being set.
+ * Passing a NULL handle results in the priority of the calling task being set.
+ *
+ * @param uxNewPriority The priority to which the task will be set.
+ *
+ * Example usage:
+ <pre>
+ void vAFunction( void )
+ {
+ xTaskHandle xHandle;
+
+ // Create a task, storing the handle.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+ // ...
+
+ // Use the handle to raise the priority of the created task.
+ vTaskPrioritySet( xHandle, tskIDLE_PRIORITY + 1 );
+
+ // ...
+
+ // Use a NULL handle to raise our priority to the same value.
+ vTaskPrioritySet( NULL, tskIDLE_PRIORITY + 1 );
+ }
+ </pre>
+ * \defgroup vTaskPrioritySet vTaskPrioritySet
+ * \ingroup TaskCtrl
+ */
+void vTaskPrioritySet( xTaskHandle pxTask, unsigned portBASE_TYPE uxNewPriority ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <pre>void vTaskSuspend( xTaskHandle pxTaskToSuspend );</pre>
+ *
+ * INCLUDE_vTaskSuspend must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Suspend any task. When suspended a task will never get any microcontroller
+ * processing time, no matter what its priority.
+ *
+ * Calls to vTaskSuspend are not accumulative -
+ * i.e. calling vTaskSuspend () twice on the same task still only requires one
+ * call to vTaskResume () to ready the suspended task.
+ *
+ * @param pxTaskToSuspend Handle to the task being suspended. Passing a NULL
+ * handle will cause the calling task to be suspended.
+ *
+ * Example usage:
+ <pre>
+ void vAFunction( void )
+ {
+ xTaskHandle xHandle;
+
+ // Create a task, storing the handle.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+ // ...
+
+ // Use the handle to suspend the created task.
+ vTaskSuspend( xHandle );
+
+ // ...
+
+ // The created task will not run during this period, unless
+ // another task calls vTaskResume( xHandle ).
+
+ //...
+
+
+ // Suspend ourselves.
+ vTaskSuspend( NULL );
+
+ // We cannot get here unless another task calls vTaskResume
+ // with our handle as the parameter.
+ }
+ </pre>
+ * \defgroup vTaskSuspend vTaskSuspend
+ * \ingroup TaskCtrl
+ */
+void vTaskSuspend( xTaskHandle pxTaskToSuspend ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <pre>void vTaskResume( xTaskHandle pxTaskToResume );</pre>
+ *
+ * INCLUDE_vTaskSuspend must be defined as 1 for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Resumes a suspended task.
+ *
+ * A task that has been suspended by one of more calls to vTaskSuspend ()
+ * will be made available for running again by a single call to
+ * vTaskResume ().
+ *
+ * @param pxTaskToResume Handle to the task being readied.
+ *
+ * Example usage:
+ <pre>
+ void vAFunction( void )
+ {
+ xTaskHandle xHandle;
+
+ // Create a task, storing the handle.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+ // ...
+
+ // Use the handle to suspend the created task.
+ vTaskSuspend( xHandle );
+
+ // ...
+
+ // The created task will not run during this period, unless
+ // another task calls vTaskResume( xHandle ).
+
+ //...
+
+
+ // Resume the suspended task ourselves.
+ vTaskResume( xHandle );
+
+ // The created task will once again get microcontroller processing
+ // time in accordance with it priority within the system.
+ }
+ </pre>
+ * \defgroup vTaskResume vTaskResume
+ * \ingroup TaskCtrl
+ */
+void vTaskResume( xTaskHandle pxTaskToResume ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <pre>void xTaskResumeFromISR( xTaskHandle pxTaskToResume );</pre>
+ *
+ * INCLUDE_xTaskResumeFromISR must be defined as 1 for this function to be
+ * available. See the configuration section for more information.
+ *
+ * An implementation of vTaskResume() that can be called from within an ISR.
+ *
+ * A task that has been suspended by one of more calls to vTaskSuspend ()
+ * will be made available for running again by a single call to
+ * xTaskResumeFromISR ().
+ *
+ * @param pxTaskToResume Handle to the task being readied.
+ *
+ * \defgroup vTaskResumeFromISR vTaskResumeFromISR
+ * \ingroup TaskCtrl
+ */
+portBASE_TYPE xTaskResumeFromISR( xTaskHandle pxTaskToResume ) PRIVILEGED_FUNCTION;
+
+/*-----------------------------------------------------------
+ * SCHEDULER CONTROL
+ *----------------------------------------------------------*/
+
+/**
+ * task. h
+ * <pre>void vTaskStartScheduler( void );</pre>
+ *
+ * Starts the real time kernel tick processing. After calling the kernel
+ * has control over which tasks are executed and when. This function
+ * does not return until an executing task calls vTaskEndScheduler ().
+ *
+ * At least one task should be created via a call to xTaskCreate ()
+ * before calling vTaskStartScheduler (). The idle task is created
+ * automatically when the first application task is created.
+ *
+ * See the demo application file main.c for an example of creating
+ * tasks and starting the kernel.
+ *
+ * Example usage:
+ <pre>
+ void vAFunction( void )
+ {
+ // Create at least one task before starting the kernel.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
+
+ // Start the real time kernel with preemption.
+ vTaskStartScheduler ();
+
+ // Will not get here unless a task calls vTaskEndScheduler ()
+ }
+ </pre>
+ *
+ * \defgroup vTaskStartScheduler vTaskStartScheduler
+ * \ingroup SchedulerControl
+ */
+void vTaskStartScheduler( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <pre>void vTaskEndScheduler( void );</pre>
+ *
+ * Stops the real time kernel tick. All created tasks will be automatically
+ * deleted and multitasking (either preemptive or cooperative) will
+ * stop. Execution then resumes from the point where vTaskStartScheduler ()
+ * was called, as if vTaskStartScheduler () had just returned.
+ *
+ * See the demo application file main. c in the demo/PC directory for an
+ * example that uses vTaskEndScheduler ().
+ *
+ * vTaskEndScheduler () requires an exit function to be defined within the
+ * portable layer (see vPortEndScheduler () in port. c for the PC port). This
+ * performs hardware specific operations such as stopping the kernel tick.
+ *
+ * vTaskEndScheduler () will cause all of the resources allocated by the
+ * kernel to be freed - but will not free resources allocated by application
+ * tasks.
+ *
+ * Example usage:
+ <pre>
+ void vTaskCode( void * pvParameters )
+ {
+ for( ;; )
+ {
+ // Task code goes here.
+
+ // At some point we want to end the real time kernel processing
+ // so call ...
+ vTaskEndScheduler ();
+ }
+ }
+
+ void vAFunction( void )
+ {
+ // Create at least one task before starting the kernel.
+ xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
+
+ // Start the real time kernel with preemption.
+ vTaskStartScheduler ();
+
+ // Will only get here when the vTaskCode () task has called
+ // vTaskEndScheduler (). When we get here we are back to single task
+ // execution.
+ }
+ </pre>
+ *
+ * \defgroup vTaskEndScheduler vTaskEndScheduler
+ * \ingroup SchedulerControl
+ */
+void vTaskEndScheduler( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <pre>void vTaskSuspendAll( void );</pre>
+ *
+ * Suspends all real time kernel activity while keeping interrupts (including the
+ * kernel tick) enabled.
+ *
+ * After calling vTaskSuspendAll () the calling task will continue to execute
+ * without risk of being swapped out until a call to xTaskResumeAll () has been
+ * made.
+ *
+ * API functions that have the potential to cause a context switch (for example,
+ * vTaskDelayUntil(), xQueueSend(), etc.) must not be called while the scheduler
+ * is suspended.
+ *
+ * Example usage:
+ <pre>
+ void vTask1( void * pvParameters )
+ {
+ for( ;; )
+ {
+ // Task code goes here.
+
+ // ...
+
+ // At some point the task wants to perform a long operation during
+ // which it does not want to get swapped out. It cannot use
+ // taskENTER_CRITICAL ()/taskEXIT_CRITICAL () as the length of the
+ // operation may cause interrupts to be missed - including the
+ // ticks.
+
+ // Prevent the real time kernel swapping out the task.
+ vTaskSuspendAll ();
+
+ // Perform the operation here. There is no need to use critical
+ // sections as we have all the microcontroller processing time.
+ // During this time interrupts will still operate and the kernel
+ // tick count will be maintained.
+
+ // ...
+
+ // The operation is complete. Restart the kernel.
+ xTaskResumeAll ();
+ }
+ }
+ </pre>
+ * \defgroup vTaskSuspendAll vTaskSuspendAll
+ * \ingroup SchedulerControl
+ */
+void vTaskSuspendAll( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <pre>char xTaskResumeAll( void );</pre>
+ *
+ * Resumes real time kernel activity following a call to vTaskSuspendAll ().
+ * After a call to vTaskSuspendAll () the kernel will take control of which
+ * task is executing at any time.
+ *
+ * @return If resuming the scheduler caused a context switch then pdTRUE is
+ * returned, otherwise pdFALSE is returned.
+ *
+ * Example usage:
+ <pre>
+ void vTask1( void * pvParameters )
+ {
+ for( ;; )
+ {
+ // Task code goes here.
+
+ // ...
+
+ // At some point the task wants to perform a long operation during
+ // which it does not want to get swapped out. It cannot use
+ // taskENTER_CRITICAL ()/taskEXIT_CRITICAL () as the length of the
+ // operation may cause interrupts to be missed - including the
+ // ticks.
+
+ // Prevent the real time kernel swapping out the task.
+ vTaskSuspendAll ();
+
+ // Perform the operation here. There is no need to use critical
+ // sections as we have all the microcontroller processing time.
+ // During this time interrupts will still operate and the real
+ // time kernel tick count will be maintained.
+
+ // ...
+
+ // The operation is complete. Restart the kernel. We want to force
+ // a context switch - but there is no point if resuming the scheduler
+ // caused a context switch already.
+ if( !xTaskResumeAll () )
+ {
+ taskYIELD ();
+ }
+ }
+ }
+ </pre>
+ * \defgroup xTaskResumeAll xTaskResumeAll
+ * \ingroup SchedulerControl
+ */
+signed portBASE_TYPE xTaskResumeAll( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <pre>signed portBASE_TYPE xTaskIsTaskSuspended( xTaskHandle xTask );</pre>
+ *
+ * Utility task that simply returns pdTRUE if the task referenced by xTask is
+ * currently in the Suspended state, or pdFALSE if the task referenced by xTask
+ * is in any other state.
+ *
+ */
+signed portBASE_TYPE xTaskIsTaskSuspended( xTaskHandle xTask ) PRIVILEGED_FUNCTION;
+
+/*-----------------------------------------------------------
+ * TASK UTILITIES
+ *----------------------------------------------------------*/
+
+/**
+ * task. h
+ * <PRE>volatile portTickType xTaskGetTickCount( void );</PRE>
+ *
+ * @return The count of ticks since vTaskStartScheduler was called.
+ *
+ * \page xTaskGetTickCount xTaskGetTickCount
+ * \ingroup TaskUtils
+ */
+portTickType xTaskGetTickCount( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <PRE>unsigned short uxTaskGetNumberOfTasks( void );</PRE>
+ *
+ * @return The number of tasks that the real time kernel is currently managing.
+ * This includes all ready, blocked and suspended tasks. A task that
+ * has been deleted but not yet freed by the idle task will also be
+ * included in the count.
+ *
+ * \page uxTaskGetNumberOfTasks uxTaskGetNumberOfTasks
+ * \ingroup TaskUtils
+ */
+unsigned portBASE_TYPE uxTaskGetNumberOfTasks( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <PRE>void vTaskList( char *pcWriteBuffer );</PRE>
+ *
+ * configUSE_TRACE_FACILITY must be defined as 1 for this function to be
+ * available. See the configuration section for more information.
+ *
+ * NOTE: This function will disable interrupts for its duration. It is
+ * not intended for normal application runtime use but as a debug aid.
+ *
+ * Lists all the current tasks, along with their current state and stack
+ * usage high water mark.
+ *
+ * Tasks are reported as blocked ('B'), ready ('R'), deleted ('D') or
+ * suspended ('S').
+ *
+ * @param pcWriteBuffer A buffer into which the above mentioned details
+ * will be written, in ascii form. This buffer is assumed to be large
+ * enough to contain the generated report. Approximately 40 bytes per
+ * task should be sufficient.
+ *
+ * \page vTaskList vTaskList
+ * \ingroup TaskUtils
+ */
+void vTaskList( signed char *pcWriteBuffer ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <PRE>void vTaskGetRunTimeStats( char *pcWriteBuffer );</PRE>
+ *
+ * configGENERATE_RUN_TIME_STATS must be defined as 1 for this function
+ * to be available. The application must also then provide definitions
+ * for portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() and
+ * portGET_RUN_TIME_COUNTER_VALUE to configure a peripheral timer/counter
+ * and return the timers current count value respectively. The counter
+ * should be at least 10 times the frequency of the tick count.
+ *
+ * NOTE: This function will disable interrupts for its duration. It is
+ * not intended for normal application runtime use but as a debug aid.
+ *
+ * Setting configGENERATE_RUN_TIME_STATS to 1 will result in a total
+ * accumulated execution time being stored for each task. The resolution
+ * of the accumulated time value depends on the frequency of the timer
+ * configured by the portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() macro.
+ * Calling vTaskGetRunTimeStats() writes the total execution time of each
+ * task into a buffer, both as an absolute count value and as a percentage
+ * of the total system execution time.
+ *
+ * @param pcWriteBuffer A buffer into which the execution times will be
+ * written, in ascii form. This buffer is assumed to be large enough to
+ * contain the generated report. Approximately 40 bytes per task should
+ * be sufficient.
+ *
+ * \page vTaskGetRunTimeStats vTaskGetRunTimeStats
+ * \ingroup TaskUtils
+ */
+void vTaskGetRunTimeStats( signed char *pcWriteBuffer ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <PRE>void vTaskStartTrace( char * pcBuffer, unsigned portBASE_TYPE uxBufferSize );</PRE>
+ *
+ * Starts a real time kernel activity trace. The trace logs the identity of
+ * which task is running when.
+ *
+ * The trace file is stored in binary format. A separate DOS utility called
+ * convtrce.exe is used to convert this into a tab delimited text file which
+ * can be viewed and plotted in a spread sheet.
+ *
+ * @param pcBuffer The buffer into which the trace will be written.
+ *
+ * @param ulBufferSize The size of pcBuffer in bytes. The trace will continue
+ * until either the buffer in full, or ulTaskEndTrace () is called.
+ *
+ * \page vTaskStartTrace vTaskStartTrace
+ * \ingroup TaskUtils
+ */
+void vTaskStartTrace( signed char * pcBuffer, unsigned long ulBufferSize ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * <PRE>unsigned long ulTaskEndTrace( void );</PRE>
+ *
+ * Stops a kernel activity trace. See vTaskStartTrace ().
+ *
+ * @return The number of bytes that have been written into the trace buffer.
+ *
+ * \page usTaskEndTrace usTaskEndTrace
+ * \ingroup TaskUtils
+ */
+unsigned long ulTaskEndTrace( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * task.h
+ * <PRE>unsigned portBASE_TYPE uxTaskGetStackHighWaterMark( xTaskHandle xTask );</PRE>
+ *
+ * INCLUDE_uxTaskGetStackHighWaterMark must be set to 1 in FreeRTOSConfig.h for
+ * this function to be available.
+ *
+ * Returns the high water mark of the stack associated with xTask. That is,
+ * the minimum free stack space there has been (in bytes) since the task
+ * started. The smaller the returned number the closer the task has come
+ * to overflowing its stack.
+ *
+ * @param xTask Handle of the task associated with the stack to be checked.
+ * Set xTask to NULL to check the stack of the calling task.
+ *
+ * @return The smallest amount of free stack space there has been (in bytes)
+ * since the task referenced by xTask was created.
+ */
+unsigned portBASE_TYPE uxTaskGetStackHighWaterMark( xTaskHandle xTask ) PRIVILEGED_FUNCTION;
+
+/**
+ * task.h
+ * <pre>void vTaskSetApplicationTaskTag( xTaskHandle xTask, pdTASK_HOOK_CODE pxHookFunction );</pre>
+ *
+ * Sets pxHookFunction to be the task hook function used by the task xTask.
+ * Passing xTask as NULL has the effect of setting the calling tasks hook
+ * function.
+ */
+void vTaskSetApplicationTaskTag( xTaskHandle xTask, pdTASK_HOOK_CODE pxHookFunction ) PRIVILEGED_FUNCTION;
+
+/**
+ * task.h
+ * <pre>void xTaskGetApplicationTaskTag( xTaskHandle xTask );</pre>
+ *
+ * Returns the pxHookFunction value assigned to the task xTask.
+ */
+pdTASK_HOOK_CODE xTaskGetApplicationTaskTag( xTaskHandle xTask ) PRIVILEGED_FUNCTION;
+
+/**
+ * task.h
+ * <pre>portBASE_TYPE xTaskCallApplicationTaskHook( xTaskHandle xTask, pdTASK_HOOK_CODE pxHookFunction );</pre>
+ *
+ * Calls the hook function associated with xTask. Passing xTask as NULL has
+ * the effect of calling the Running tasks (the calling task) hook function.
+ *
+ * pvParameter is passed to the hook function for the task to interpret as it
+ * wants.
+ */
+portBASE_TYPE xTaskCallApplicationTaskHook( xTaskHandle xTask, void *pvParameter ) PRIVILEGED_FUNCTION;
+
+
+/*-----------------------------------------------------------
+ * SCHEDULER INTERNALS AVAILABLE FOR PORTING PURPOSES
+ *----------------------------------------------------------*/
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS ONLY
+ * INTENDED FOR USE WHEN IMPLEMENTING A PORT OF THE SCHEDULER AND IS
+ * AN INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * Called from the real time kernel tick (either preemptive or cooperative),
+ * this increments the tick count and checks if any tasks that are blocked
+ * for a finite period required removing from a blocked list and placing on
+ * a ready list.
+ */
+void vTaskIncrementTick( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS AN
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.
+ *
+ * Removes the calling task from the ready list and places it both
+ * on the list of tasks waiting for a particular event, and the
+ * list of delayed tasks. The task will be removed from both lists
+ * and replaced on the ready list should either the event occur (and
+ * there be no higher priority tasks waiting on the same event) or
+ * the delay period expires.
+ *
+ * @param pxEventList The list containing tasks that are blocked waiting
+ * for the event to occur.
+ *
+ * @param xTicksToWait The maximum amount of time that the task should wait
+ * for the event to occur. This is specified in kernel ticks,the constant
+ * portTICK_RATE_MS can be used to convert kernel ticks into a real time
+ * period.
+ */
+void vTaskPlaceOnEventList( const xList * const pxEventList, portTickType xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS AN
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.
+ *
+ * Removes a task from both the specified event list and the list of blocked
+ * tasks, and places it on a ready queue.
+ *
+ * xTaskRemoveFromEventList () will be called if either an event occurs to
+ * unblock a task, or the block timeout period expires.
+ *
+ * @return pdTRUE if the task being removed has a higher priority than the task
+ * making the call, otherwise pdFALSE.
+ */
+signed portBASE_TYPE xTaskRemoveFromEventList( const xList * const pxEventList ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS AN
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * INCLUDE_vTaskCleanUpResources and INCLUDE_vTaskSuspend must be defined as 1
+ * for this function to be available.
+ * See the configuration section for more information.
+ *
+ * Empties the ready and delayed queues of task control blocks, freeing the
+ * memory allocated for the task control block and task stacks as it goes.
+ */
+void vTaskCleanUpResources( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE. IT IS ONLY
+ * INTENDED FOR USE WHEN IMPLEMENTING A PORT OF THE SCHEDULER AND IS
+ * AN INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * Sets the pointer to the current TCB to the TCB of the highest priority task
+ * that is ready to run.
+ */
+void vTaskSwitchContext( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Return the handle of the calling task.
+ */
+xTaskHandle xTaskGetCurrentTaskHandle( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Capture the current time status for future reference.
+ */
+void vTaskSetTimeOutState( xTimeOutType * const pxTimeOut ) PRIVILEGED_FUNCTION;
+
+/*
+ * Compare the time status now with that previously captured to see if the
+ * timeout has expired.
+ */
+portBASE_TYPE xTaskCheckForTimeOut( xTimeOutType * const pxTimeOut, portTickType * const pxTicksToWait ) PRIVILEGED_FUNCTION;
+
+/*
+ * Shortcut used by the queue implementation to prevent unnecessary call to
+ * taskYIELD();
+ */
+void vTaskMissedYield( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Returns the scheduler state as taskSCHEDULER_RUNNING,
+ * taskSCHEDULER_NOT_STARTED or taskSCHEDULER_SUSPENDED.
+ */
+portBASE_TYPE xTaskGetSchedulerState( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Raises the priority of the mutex holder to that of the calling task should
+ * the mutex holder have a priority less than the calling task.
+ */
+void vTaskPriorityInherit( xTaskHandle * const pxMutexHolder ) PRIVILEGED_FUNCTION;
+
+/*
+ * Set the priority of a task back to its proper priority in the case that it
+ * inherited a higher priority while it was holding a semaphore.
+ */
+void vTaskPriorityDisinherit( xTaskHandle * const pxMutexHolder ) PRIVILEGED_FUNCTION;
+
+/*
+ * Generic version of the task creation function which is in turn called by the
+ * xTaskCreate() and xTaskCreateRestricted() macros.
+ */
+signed portBASE_TYPE xTaskGenericCreate( pdTASK_CODE pvTaskCode, const signed char * const pcName, unsigned short usStackDepth, void *pvParameters, unsigned portBASE_TYPE uxPriority, xTaskHandle *pxCreatedTask, portSTACK_TYPE *puxStackBuffer, const xMemoryRegion * const xRegions ) PRIVILEGED_FUNCTION;
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* TASK_H */
+
+
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/list.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/list.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,191 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+
+#include "stdlib.h"
+#include "./FreeRTOS/Source/include/FreeRTOS.h"
+#include "./FreeRTOS/Source/include/list.h"
+
+/*-----------------------------------------------------------
+ * PUBLIC LIST API documented in list.h
+ *----------------------------------------------------------*/
+
+void vListInitialise( xList *pxList )
+{
+ /* The list structure contains a list item which is used to mark the
+ end of the list. To initialise the list the list end is inserted
+ as the only list entry. */
+ pxList->pxIndex = ( xListItem * ) &( pxList->xListEnd );
+
+ /* The list end value is the highest possible value in the list to
+ ensure it remains at the end of the list. */
+ pxList->xListEnd.xItemValue = portMAX_DELAY;
+
+ /* The list end next and previous pointers point to itself so we know
+ when the list is empty. */
+ pxList->xListEnd.pxNext = ( xListItem * ) &( pxList->xListEnd );
+ pxList->xListEnd.pxPrevious = ( xListItem * ) &( pxList->xListEnd );
+
+ pxList->uxNumberOfItems = 0;
+}
+/*-----------------------------------------------------------*/
+
+void vListInitialiseItem( xListItem *pxItem )
+{
+ /* Make sure the list item is not recorded as being on a list. */
+ pxItem->pvContainer = NULL;
+}
+/*-----------------------------------------------------------*/
+
+void vListInsertEnd( xList *pxList, xListItem *pxNewListItem )
+{
+volatile xListItem * pxIndex;
+
+ /* Insert a new list item into pxList, but rather than sort the list,
+ makes the new list item the last item to be removed by a call to
+ pvListGetOwnerOfNextEntry. This means it has to be the item pointed to by
+ the pxIndex member. */
+ pxIndex = pxList->pxIndex;
+
+ pxNewListItem->pxNext = pxIndex->pxNext;
+ pxNewListItem->pxPrevious = pxList->pxIndex;
+ pxIndex->pxNext->pxPrevious = ( volatile xListItem * ) pxNewListItem;
+ pxIndex->pxNext = ( volatile xListItem * ) pxNewListItem;
+ pxList->pxIndex = ( volatile xListItem * ) pxNewListItem;
+
+ /* Remember which list the item is in. */
+ pxNewListItem->pvContainer = ( void * ) pxList;
+
+ ( pxList->uxNumberOfItems )++;
+}
+/*-----------------------------------------------------------*/
+
+void vListInsert( xList *pxList, xListItem *pxNewListItem )
+{
+volatile xListItem *pxIterator;
+portTickType xValueOfInsertion;
+
+ /* Insert the new list item into the list, sorted in ulListItem order. */
+ xValueOfInsertion = pxNewListItem->xItemValue;
+
+ /* If the list already contains a list item with the same item value then
+ the new list item should be placed after it. This ensures that TCB's which
+ are stored in ready lists (all of which have the same ulListItem value)
+ get an equal share of the CPU. However, if the xItemValue is the same as
+ the back marker the iteration loop below will not end. This means we need
+ to guard against this by checking the value first and modifying the
+ algorithm slightly if necessary. */
+ if( xValueOfInsertion == portMAX_DELAY )
+ {
+ pxIterator = pxList->xListEnd.pxPrevious;
+ }
+ else
+ {
+ /* *** NOTE ***********************************************************
+ If you find your application is crashing here then likely causes are:
+ 1) Stack overflow -
+ see http://www.freertos.org/Stacks-and-stack-overflow-checking.html
+ 2) Incorrect interrupt priority assignment, especially on Cortex M3
+ parts where numerically high priority values denote low actual
+ interrupt priories, which can seem counter intuitive. See
+ configMAX_SYSCALL_INTERRUPT_PRIORITY on http://www.freertos.org/a00110.html
+ 3) Calling an API function from within a critical section or when
+ the scheduler is suspended.
+ 4) Using a queue or semaphore before it has been initialised or
+ before the scheduler has been started (are interrupts firing
+ before vTaskStartScheduler() has been called?).
+ See http://www.freertos.org/FAQHelp.html for more tips.
+ **********************************************************************/
+
+ for( pxIterator = ( xListItem * ) &( pxList->xListEnd ); pxIterator->pxNext->xItemValue <= xValueOfInsertion; pxIterator = pxIterator->pxNext )
+ {
+ /* There is nothing to do here, we are just iterating to the
+ wanted insertion position. */
+ }
+ }
+
+ pxNewListItem->pxNext = pxIterator->pxNext;
+ pxNewListItem->pxNext->pxPrevious = ( volatile xListItem * ) pxNewListItem;
+ pxNewListItem->pxPrevious = pxIterator;
+ pxIterator->pxNext = ( volatile xListItem * ) pxNewListItem;
+
+ /* Remember which list the item is in. This allows fast removal of the
+ item later. */
+ pxNewListItem->pvContainer = ( void * ) pxList;
+
+ ( pxList->uxNumberOfItems )++;
+}
+/*-----------------------------------------------------------*/
+
+void vListRemove( xListItem *pxItemToRemove )
+{
+xList * pxList;
+
+ pxItemToRemove->pxNext->pxPrevious = pxItemToRemove->pxPrevious;
+ pxItemToRemove->pxPrevious->pxNext = pxItemToRemove->pxNext;
+
+ /* The list item knows which list it is in. Obtain the list from the list
+ item. */
+ pxList = ( xList * ) pxItemToRemove->pvContainer;
+
+ /* Make sure the index is left pointing to a valid item. */
+ if( pxList->pxIndex == pxItemToRemove )
+ {
+ pxList->pxIndex = pxItemToRemove->pxPrevious;
+ }
+
+ pxItemToRemove->pvContainer = NULL;
+ ( pxList->uxNumberOfItems )--;
+}
+/*-----------------------------------------------------------*/
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/portable/GCC/ARM_CM3/port.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/portable/GCC/ARM_CM3/port.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,313 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/*-----------------------------------------------------------
+ * Implementation of functions defined in portable.h for the ARM CM3 port.
+ *----------------------------------------------------------*/
+
+// Modified by Kenji Arai / JH1PJL, October 30th,2010
+// Some functions go to port_asm.c
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+/* For backward compatibility, ensure configKERNEL_INTERRUPT_PRIORITY is
+defined. The value should also ensure backward compatibility.
+FreeRTOS.org versions prior to V4.4.0 did not include this definition. */
+#ifndef configKERNEL_INTERRUPT_PRIORITY
+ #define configKERNEL_INTERRUPT_PRIORITY 255
+#endif
+
+/* Constants required to manipulate the NVIC. */
+#define portNVIC_SYSTICK_CTRL ( ( volatile unsigned long *) 0xe000e010 )
+#define portNVIC_SYSTICK_LOAD ( ( volatile unsigned long *) 0xe000e014 )
+#define portNVIC_INT_CTRL ( ( volatile unsigned long *) 0xe000ed04 )
+#define portNVIC_SYSPRI2 ( ( volatile unsigned long *) 0xe000ed20 )
+#define portNVIC_SYSTICK_CLK 0x00000004
+#define portNVIC_SYSTICK_INT 0x00000002
+#define portNVIC_SYSTICK_ENABLE 0x00000001
+#define portNVIC_PENDSVSET 0x10000000
+#define portNVIC_PENDSV_PRI ( ( ( unsigned long ) configKERNEL_INTERRUPT_PRIORITY ) << 16 )
+#define portNVIC_SYSTICK_PRI ( ( ( unsigned long ) configKERNEL_INTERRUPT_PRIORITY ) << 24 )
+
+/* Constants required to set up the initial stack. */
+#define portINITIAL_XPSR ( 0x01000000 )
+
+/* The priority used by the kernel is assigned to a variable to make access
+from inline assembler easier. */
+//const unsigned long ulKernelPriority = configKERNEL_INTERRUPT_PRIORITY;
+
+/* Each task maintains its own interrupt status in the critical nesting
+variable. */
+#if 0
+static unsigned portBASE_TYPE uxCriticalNesting = 0xaaaaaaaa;
+#else
+unsigned portBASE_TYPE uxCriticalNesting = 0xaaaaaaaa;
+#endif
+/*
+ * Setup the timer to generate the tick interrupts.
+ */
+static void prvSetupTimerInterrupt( void );
+
+/*
+ * Exception handlers.
+ */
+#if 0
+void xPortPendSVHandler( void ) __attribute__ (( naked ));
+#else
+extern void xPortPendSVHandler( void );
+#endif
+void xPortSysTickHandler( void );
+#if 0
+void vPortSVCHandler( void ) __attribute__ (( naked ));
+#else
+extern void vPortSVCHandler( void );
+#endif
+
+/*
+ * Start first task is a separate function so it can be tested in isolation.
+ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+#if 0
+void vPortStartFirstTask( void ) __attribute__ (( naked ));
+#else
+extern void vPortStartFirstTask( void );
+#endif
+#ifdef __cplusplus
+}
+#endif
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+portSTACK_TYPE *pxPortInitialiseStack( portSTACK_TYPE *pxTopOfStack, pdTASK_CODE pxCode, void *pvParameters )
+{
+ /* Simulate the stack frame as it would be created by a context switch
+ interrupt. */
+ pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
+ *pxTopOfStack = portINITIAL_XPSR; /* xPSR */
+ pxTopOfStack--;
+ *pxTopOfStack = ( portSTACK_TYPE ) pxCode; /* PC */
+ pxTopOfStack--;
+ *pxTopOfStack = 0; /* LR */
+ pxTopOfStack -= 5; /* R12, R3, R2 and R1. */
+ *pxTopOfStack = ( portSTACK_TYPE ) pvParameters; /* R0 */
+ pxTopOfStack -= 8; /* R11, R10, R9, R8, R7, R6, R5 and R4. */
+
+ return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+#if 0
+void vPortSVCHandler( void )
+{
+ __asm volatile (
+ " ldr r3, pxCurrentTCBConst2 \n" /* Restore the context. */
+ " ldr r1, [r3] \n" /* Use pxCurrentTCBConst to get the pxCurrentTCB address. */
+ " ldr r0, [r1] \n" /* The first item in pxCurrentTCB is the task top of stack. */
+ " ldmia r0!, {r4-r11} \n" /* Pop the registers that are not automatically saved on exception entry and the critical nesting count. */
+ " msr psp, r0 \n" /* Restore the task stack pointer. */
+ " mov r0, #0 \n"
+ " msr basepri, r0 \n"
+ " orr r14, #0xd \n"
+ " bx r14 \n"
+ " \n"
+ " .align 2 \n"
+ "pxCurrentTCBConst2: .word pxCurrentTCB \n"
+ );
+}
+/*-----------------------------------------------------------*/
+#endif
+
+#if 0
+void vPortStartFirstTask( void )
+{
+ __asm volatile(
+ " ldr r0, =0xE000ED08 \n" /* Use the NVIC offset register to locate the stack. */
+ " ldr r0, [r0] \n"
+ " ldr r0, [r0] \n"
+ " msr msp, r0 \n" /* Set the msp back to the start of the stack. */
+ " svc 0 \n" /* System call to start first task. */
+ );
+}
+/*-----------------------------------------------------------*/
+#endif
+
+/*
+ * See header file for description.
+ */
+portBASE_TYPE xPortStartScheduler( void )
+{
+ /* Make PendSV, CallSV and SysTick the same priroity as the kernel. */
+ *(portNVIC_SYSPRI2) |= portNVIC_PENDSV_PRI;
+ *(portNVIC_SYSPRI2) |= portNVIC_SYSTICK_PRI;
+
+ /* Start the timer that generates the tick ISR. Interrupts are disabled
+ here already. */
+ prvSetupTimerInterrupt();
+
+ /* Initialise the critical nesting count ready for the first task. */
+ uxCriticalNesting = 0;
+
+ /* Start the first task. */
+ vPortStartFirstTask();
+
+ /* Should not get here! */
+ return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void )
+{
+ /* It is unlikely that the CM3 port will require this function as there
+ is nothing to return to. */
+}
+/*-----------------------------------------------------------*/
+
+void vPortYieldFromISR( void )
+{
+ /* Set a PendSV to request a context switch. */
+ *(portNVIC_INT_CTRL) = portNVIC_PENDSVSET;
+}
+/*-----------------------------------------------------------*/
+
+#if 0
+void vPortEnterCritical( void )
+{
+ portDISABLE_INTERRUPTS();
+ uxCriticalNesting++;
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void )
+{
+ uxCriticalNesting--;
+ if( uxCriticalNesting == 0 )
+ {
+ portENABLE_INTERRUPTS();
+ }
+}
+/*-----------------------------------------------------------*/
+
+
+void xPortPendSVHandler( void )
+{
+ /* This is a naked function. */
+
+ __asm volatile
+ (
+ " mrs r0, psp \n"
+ " \n"
+ " ldr r3, pxCurrentTCBConst \n" /* Get the location of the current TCB. */
+ " ldr r2, [r3] \n"
+ " \n"
+ " stmdb r0!, {r4-r11} \n" /* Save the remaining registers. */
+ " str r0, [r2] \n" /* Save the new top of stack into the first member of the TCB. */
+ " \n"
+ " stmdb sp!, {r3, r14} \n"
+ " mov r0, %0 \n"
+ " msr basepri, r0 \n"
+ " bl vTaskSwitchContext \n"
+ " mov r0, #0 \n"
+ " msr basepri, r0 \n"
+ " ldmia sp!, {r3, r14} \n"
+ " \n" /* Restore the context, including the critical nesting count. */
+ " ldr r1, [r3] \n"
+ " ldr r0, [r1] \n" /* The first item in pxCurrentTCB is the task top of stack. */
+ " ldmia r0!, {r4-r11} \n" /* Pop the registers. */
+ " msr psp, r0 \n"
+ " bx r14 \n"
+ " \n"
+ " .align 2 \n"
+ "pxCurrentTCBConst: .word pxCurrentTCB \n"
+ ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY)
+ );
+}
+/*-----------------------------------------------------------*/
+
+void xPortSysTickHandler( void )
+{
+unsigned long ulDummy;
+
+ /* If using preemption, also force a context switch. */
+ #if configUSE_PREEMPTION == 1
+ *(portNVIC_INT_CTRL) = portNVIC_PENDSVSET;
+ #endif
+
+ // Modified by Kenji Arai / JH1PJL, October 30th,2010
+ ulDummy = 0;
+ portSET_INTERRUPT_MASK_FROM_ISR();
+ {
+ vTaskIncrementTick();
+ }
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( ulDummy );
+}
+/*-----------------------------------------------------------*/
+#endif
+
+/*
+ * Setup the systick timer to generate the tick interrupts at the required
+ * frequency.
+ */
+void prvSetupTimerInterrupt( void )
+{
+ /* Configure SysTick to interrupt at the requested rate. */
+ *(portNVIC_SYSTICK_LOAD) = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
+ *(portNVIC_SYSTICK_CTRL) = portNVIC_SYSTICK_CLK | portNVIC_SYSTICK_INT | portNVIC_SYSTICK_ENABLE;
+}
+/*-----------------------------------------------------------*/
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/portable/GCC/ARM_CM3/port_asm_mbed.s
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/portable/GCC/ARM_CM3/port_asm_mbed.s Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,606 @@
+;//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+;
+; This is a program for FreeRTOS on LPC1768 mbed IDE
+;
+; C source file: port_asm.c
+; Compiled on: GCC: (Sourcery G++ Lite 2010q1-188) 4.4.1
+; Hand modification by: Kenji Arai / JH1PJL
+; http://www.page.sannet.ne.jp/kenjia/index.html
+;
+; Started on: October 31st, 2010
+; updated on: October 31st, 2010
+;
+;//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+; .syntax unified
+; .cpu cortex-m3
+; .fpu softvfp
+; .eabi_attribute 20, 1
+; .eabi_attribute 21, 1
+; .eabi_attribute 23, 3
+; .eabi_attribute 24, 1
+; .eabi_attribute 25, 1
+; .eabi_attribute 26, 1
+; .eabi_attribute 30, 6
+; .eabi_attribute 18, 4
+
+ EXTERN pxCurrentTCB
+ EXTERN uxCriticalNesting
+ EXTERN vTaskSwitchContext
+ EXTERN vTaskIncrementTick
+ EXTERN prvCopyDataToQueue
+ EXTERN xTaskRemoveFromEventList
+ EXTERN prvCopyDataFromQueue
+ EXTERN prvIdleTask
+ EXTERN xTaskGenericCreate
+ EXTERN xSchedulerRunning
+ EXTERN xTickCount
+ EXTERN vConfigureTimerForRunTimeStats
+ EXTERN xPortStartScheduler
+ EXTERN vPortEndScheduler
+
+ CODE16
+ PRESERVE8
+ AREA Port, CODE, READONLY
+;//////////////////////////////////////////////////////
+; .thumb
+ THUMB
+; .file "port_asm.c"
+; .text
+; .align 2
+ ALIGN 2
+ GLOBAL Reset_Handler
+ THUMB
+Reset_Handler
+ push {r7, lr}
+ pop {r7, pc}
+
+;///////////////////////////////////////////////////////
+ ALIGN 2
+; .global vPortSVCHandler
+ GLOBAL vPortSVCHandler
+; .thumb
+ THUMB
+; .thumb_func
+; .type vPortSVCHandler, %function
+;vPortSVCHandler:
+vPortSVCHandler
+; @ Naked Function: prologue and epilogue provided by programmer.
+; @ args = 0, pretend = 0, frame = 0
+; @ frame_needed = 1, uses_anonymous_args = 0
+;@ 199 "port_asm.c" 1
+ ldr r3, pxCurrentTCBConst2
+ ldr r1, [r3]
+ ldr r0, [r1]
+ ldmia r0!, {r4-r11}
+ msr psp, r0
+ mov r0, #0
+ msr basepri, r0
+ orr r14, #0xd
+ bx r14
+
+; .align 2
+ ALIGN 2
+;pxCurrentTCBConst2: .word pxCurrentTCB
+pxCurrentTCBConst2 DCD pxCurrentTCB
+
+;@ 0 "" 2
+; .thumb
+ THUMB
+; .size vPortSVCHandler, .-vPortSVCHandler
+;///////////////////////////////////////////////////////
+; .align 2
+ ALIGN 2
+; .global vPortStartFirstTask
+ GLOBAL vPortStartFirstTask
+; .thumb
+ THUMB
+; .thumb_func
+; .type vPortStartFirstTask, %function
+;vPortStartFirstTask:
+vPortStartFirstTask
+; @ Naked Function: prologue and epilogue provided by programmer.
+; @ args = 0, pretend = 0, frame = 0
+; @ frame_needed = 1, uses_anonymous_args = 0
+;@ 218 "port_asm.c" 1
+ ldr r0, =0xE000ED08
+ ldr r0, [r0]
+ ldr r0, [r0]
+ msr msp, r0
+ svc 0
+
+;@ 0 "" 2
+; .thumb
+ THUMB
+; .size vPortStartFirstTask, .-vPortStartFirstTask
+;///////////////////////////////////////////////////////
+; .align 2
+ ALIGN 2
+; .global vPortEnterCritical
+ GLOBAL vPortEnterCritical
+; .thumb
+ THUMB
+; .thumb_func
+; .type vPortEnterCritical, %function
+;vPortEnterCritical:
+vPortEnterCritical
+; @ args = 0, pretend = 0, frame = 0
+; @ frame_needed = 1, uses_anonymous_args = 0
+; @ link register save eliminated.
+ push {r7}
+ add r7, sp, #0
+;@ 270 "port_asm.c" 1
+ mov r0, #40
+ msr basepri, r0
+
+;@ 0 "" 2
+; .thumb
+ THUMB
+ movw r3, #:lower16:uxCriticalNesting
+ movt r3, #:upper16:uxCriticalNesting
+ ldr r3, [r3, #0]
+ add r2, r3, #1
+ movw r3, #:lower16:uxCriticalNesting
+ movt r3, #:upper16:uxCriticalNesting
+ str r2, [r3, #0]
+ mov sp, r7
+ pop {r7}
+ bx lr
+; .size vPortEnterCritical, .-vPortEnterCritical
+;///////////////////////////////////////////////////////
+; .align 2
+ ALIGN 2
+; .global vPortExitCritical
+ GLOBAL vPortExitCritical
+; .thumb
+ THUMB
+; .thumb_func
+; .type vPortExitCritical, %function
+;vPortExitCritical:
+vPortExitCritical
+; @ args = 0, pretend = 0, frame = 0
+; @ frame_needed = 1, uses_anonymous_args = 0
+; @ link register save eliminated.
+ push {r7}
+ add r7, sp, #0
+ movw r3, #:lower16:uxCriticalNesting
+ movt r3, #:upper16:uxCriticalNesting
+ ldr r3, [r3, #0]
+ add r2, r3, #-1
+ movw r3, #:lower16:uxCriticalNesting
+ movt r3, #:upper16:uxCriticalNesting
+ str r2, [r3, #0]
+ movw r3, #:lower16:uxCriticalNesting
+ movt r3, #:upper16:uxCriticalNesting
+ ldr r3, [r3, #0]
+ cmp r3, #0
+; bne .L9
+ bne Jmp0
+;@ 280 "port_asm.c" 1
+ mov r0, #0
+ msr basepri, r0
+
+;@ 0 "" 2
+; .thumb
+ THUMB
+;.L9:
+Jmp0
+ mov sp, r7
+ pop {r7}
+ bx lr
+; .size vPortExitCritical, .-vPortExitCritical
+;///////////////////////////////////////////////////////
+; .align 2
+ ALIGN 2
+; .global xPortPendSVHandler
+ GLOBAL xPortPendSVHandler
+; .thumb
+ THUMB
+; .thumb_func
+; .type xPortPendSVHandler, %function
+;xPortPendSVHandler:
+xPortPendSVHandler
+; @ Naked Function: prologue and epilogue provided by programmer.
+; @ args = 0, pretend = 0, frame = 0
+; @ frame_needed = 1, uses_anonymous_args = 0
+;@ 289 "port_asm.c" 1
+ mrs r0, psp
+
+ ldr r3, pxCurrentTCBConst
+ ldr r2, [r3]
+
+ stmdb r0!, {r4-r11}
+ str r0, [r2]
+
+ stmdb sp!, {r3, r14}
+ mov r0, #40
+ msr basepri, r0
+; error " port_asm_mbed.s.s.LPC1768.o(Port) contains invalid call from '~PRES8 (The user did not require code to preserve 8-byte aligment of 8-byte data objects)' function to 'REQ8 (Code was permitted to depend on the 8-byte aligment of 8-byte data items)' function vTaskSwitchContext. (EL6238E)
+ bl vTaskSwitchContext
+
+ mov r0, #0
+ msr basepri, r0
+ ldmia sp!, {r3, r14}
+
+ ldr r1, [r3]
+ ldr r0, [r1]
+ ldmia r0!, {r4-r11}
+ msr psp, r0
+ bx r14
+
+; .align 2
+ ALIGN 2
+;pxCurrentTCBConst: .word pxCurrentTCB
+pxCurrentTCBConst DCD pxCurrentTCB
+
+;@ 0 "" 2
+; .thumb
+ THUMB
+; .size xPortPendSVHandler, .-xPortPendSVHandler
+;///////////////////////////////////////////////////////
+; .align 2
+ ALIGN 2
+; .global xPortSysTickHandler
+ GLOBAL xPortSysTickHandler
+; .thumb
+ THUMB
+; .thumb_func
+; .type xPortSysTickHandler, %function
+;xPortSysTickHandler:
+xPortSysTickHandler
+; @ args = 0, pretend = 0, frame = 8
+; @ frame_needed = 1, uses_anonymous_args = 0
+ push {r7, lr}
+ sub sp, sp, #8
+ add r7, sp, #0
+; movw r3, #:lower16:-536810236
+; movt r3, #:upper16:-536810236
+ movw r3, #0xED04
+ movt r3, #0xE000
+; movw r3, #:LDW:(-536810236)
+; movt r3, #:HDW:(-536810236)
+; mov32 r3, -536810236
+; mov r2, #268435456
+ str r2, [r3, #0]
+ mov r3, #0
+ str r3, [r7, #4]
+;@ 329 "port_asm.c" 1
+ mov r0, #40
+ msr basepri, r0
+
+;@ 0 "" 2
+; .thumb
+ THUMB
+ bl vTaskIncrementTick
+;@ 333 "port_asm.c" 1
+ mov r0, #0
+ msr basepri, r0
+
+;@ 0 "" 2
+; .thumb
+ THUMB
+ add r7, r7, #8
+ mov sp, r7
+ pop {r7, pc}
+; .size xPortSysTickHandler, .-xPortSysTickHandler
+;///////////////////////////////////////////////////////
+; .align 2
+ ALIGN 2
+; .global xQueueGenericSendFromISR
+ GLOBAL xQueueGenericSendFromISR
+; .thumb
+ THUMB
+; .thumb_func
+; .type xQueueGenericSendFromISR, %function
+;xQueueGenericSendFromISR:
+xQueueGenericSendFromISR
+; @ args = 0, pretend = 0, frame = 24
+; @ frame_needed = 1, uses_anonymous_args = 0
+ push {r7, lr}
+ sub sp, sp, #24
+ add r7, sp, #0
+ str r0, [r7, #12]
+ str r1, [r7, #8]
+ str r2, [r7, #4]
+ str r3, [r7, #0]
+ mov r3, #0
+ str r3, [r7, #20]
+;@ 399 "port_asm.c" 1
+ mov r0, #40
+ msr basepri, r0
+
+;@ 0 "" 2
+; .thumb
+ THUMB
+ ldr r3, [r7, #12]
+ ldr r2, [r3, #56]
+ ldr r3, [r7, #12]
+ ldr r3, [r3, #60]
+ cmp r2, r3
+; bcs .L15
+ bcs Jmp5
+ ldr r0, [r7, #12]
+ ldr r1, [r7, #8]
+ ldr r2, [r7, #0]
+ bl prvCopyDataToQueue
+ ldr r3, [r7, #12]
+ ldr r3, [r3, #72]
+ cmp r3, #-1
+; bne .L16
+ bne Jmp1
+ ldr r3, [r7, #12]
+ ldr r3, [r3, #36]
+ cmp r3, #0
+; beq .L21
+ beq Jmp2
+ ldr r3, [r7, #12]
+ add r3, r3, #36
+ mov r0, r3
+ bl xTaskRemoveFromEventList
+ mov r3, r0
+ cmp r3, #0
+; beq .L22
+ beq Jmp3
+ ldr r3, [r7, #4]
+ mov r2, #1
+ str r2, [r3, #0]
+; b .L18
+ b Jmp4
+;.L16:
+Jmp1
+ ldr r3, [r7, #12]
+ ldr r3, [r3, #72]
+ add r2, r3, #1
+ ldr r3, [r7, #12]
+ str r2, [r3, #72]
+; b .L18
+ b Jmp4
+;.L21:
+Jmp2
+ nop
+; b .L18
+ b Jmp4
+;.L22:
+Jmp3
+ nop
+;.L18:
+Jmp4
+ mov r3, #1
+ str r3, [r7, #16]
+; b .L19
+ b Jmp6
+;.L15:
+Jmp5
+ mov r3, #0
+ str r3, [r7, #16]
+;.L19:
+Jmp6
+;@ 436 "port_asm.c" 1
+ mov r0, #0
+ msr basepri, r0
+
+;@ 0 "" 2
+; .thumb
+ THUMB
+ ldr r3, [r7, #16]
+ mov r0, r3
+ add r7, r7, #24
+ mov sp, r7
+ pop {r7, pc}
+; .size xQueueGenericSendFromISR, .-xQueueGenericSendFromISR
+;///////////////////////////////////////////////////////
+; .align 2
+ ALIGN 2
+; .global xQueueReceiveFromISR
+ GLOBAL xQueueReceiveFromISR
+; .thumb
+ THUMB
+; .thumb_func
+; .type xQueueReceiveFromISR, %function
+;xQueueReceiveFromISR:
+xQueueReceiveFromISR
+; @ args = 0, pretend = 0, frame = 24
+; @ frame_needed = 1, uses_anonymous_args = 0
+ push {r7, lr}
+ sub sp, sp, #24
+ add r7, sp, #0
+ str r0, [r7, #12]
+ str r1, [r7, #8]
+ str r2, [r7, #4]
+ mov r3, #0
+ str r3, [r7, #20]
+;@ 449 "port_asm.c" 1
+ mov r0, #40
+ msr basepri, r0
+
+;@ 0 "" 2
+; .thumb
+ THUMB
+ ldr r3, [r7, #12]
+ ldr r3, [r3, #56]
+ cmp r3, #0
+; beq .L24
+ beq Jmp11
+ ldr r0, [r7, #12]
+ ldr r1, [r7, #8]
+ bl prvCopyDataFromQueue
+ ldr r3, [r7, #12]
+ ldr r3, [r3, #56]
+ add r2, r3, #-1
+ ldr r3, [r7, #12]
+ str r2, [r3, #56]
+ ldr r3, [r7, #12]
+ ldr r3, [r3, #68]
+ cmp r3, #-1
+; bne .L25
+ bne Jmp7
+ ldr r3, [r7, #12]
+ ldr r3, [r3, #16]
+ cmp r3, #0
+; beq .L30
+ beq Jmp8
+ ldr r3, [r7, #12]
+ add r3, r3, #16
+ mov r0, r3
+ bl xTaskRemoveFromEventList
+ mov r3, r0
+ cmp r3, #0
+; beq .L31
+ beq Jmp9
+ ldr r3, [r7, #4]
+ mov r2, #1
+ str r2, [r3, #0]
+; b .L27
+ b Jmp10
+;.L25:
+Jmp7
+ ldr r3, [r7, #12]
+ ldr r3, [r3, #68]
+ add r2, r3, #1
+ ldr r3, [r7, #12]
+ str r2, [r3, #68]
+; b .L27
+ b Jmp10
+;.L30:
+Jmp8
+ nop
+; b .L27
+ b Jmp10
+;.L31:
+Jmp9
+ nop
+;.L27:
+Jmp10
+ mov r3, #1
+ str r3, [r7, #16]
+; b .L28
+ b Jmp12
+;.L24:
+Jmp11
+ mov r3, #0
+ str r3, [r7, #16]
+;.L28:
+Jmp12
+;@ 489 "port_asm.c" 1
+ mov r0, #0
+ msr basepri, r0
+
+;@ 0 "" 2
+; .thumb
+ THUMB
+ ldr r3, [r7, #16]
+ mov r0, r3
+ add r7, r7, #24
+ mov sp, r7
+ pop {r7, pc}
+; .size xQueueReceiveFromISR, .-xQueueReceiveFromISR
+;///////////////////////////////////////////////////////
+; .section .rodata
+; AREA Text, CODE, READONLY ??????????????????????????????????????????????
+; .align 2
+ ALIGN 2
+;.LC0:
+Txt0
+; .ascii "IDLE\000"
+ DCB "IDLE\000",0
+; .text
+; AREA Port, CODE, READONLY ??????????????????????????????????????????????
+;///////////////////////////////////////////////////////
+; .align 2
+ ALIGN 2
+; .global vTaskStartScheduler
+ GLOBAL vTaskStartScheduler
+; .thumb
+ THUMB
+; .thumb_func
+; .type vTaskStartScheduler, %function
+;vTaskStartScheduler:
+vTaskStartScheduler
+; @ args = 0, pretend = 0, frame = 8
+; @ frame_needed = 1, uses_anonymous_args = 0
+ push {r7, lr}
+ sub sp, sp, #24
+ add r7, sp, #16
+; movw r3, #:lower16:.LC0
+; movt r3, #:upper16:.LC0
+; movw r3, # LDW Txt0
+; movt r3, # HDW Txt0
+ movw r3, #:lower16:Txt0
+ movt r3, #:upper16:Txt0
+ mov r2, #0
+ str r2, [sp, #0]
+ mov r2, #0
+ str r2, [sp, #4]
+ mov r2, #0
+ str r2, [sp, #8]
+ mov r2, #0
+ str r2, [sp, #12]
+ movw r0, #:lower16:prvIdleTask
+ movt r0, #:upper16:prvIdleTask
+ mov r1, r3
+ mov r2, #64
+ mov r3, #0
+ bl xTaskGenericCreate
+ mov r3, r0
+ str r3, [r7, #4]
+ ldr r3, [r7, #4]
+ cmp r3, #1
+; bne .L34
+ bne Jmp13
+;@ 514 "port_asm.c" 1
+ mov r0, #40
+ msr basepri, r0
+
+;@ 0 "" 2
+; .thumb
+ THUMB
+ movw r3, #:lower16:xSchedulerRunning
+ movt r3, #:upper16:xSchedulerRunning
+ mov r2, #1
+ str r2, [r3, #0]
+ movw r3, #:lower16:xTickCount
+ movt r3, #:upper16:xTickCount
+ mov r2, #0
+ str r2, [r3, #0]
+ bl vConfigureTimerForRunTimeStats
+ bl xPortStartScheduler
+;.L34:
+Jmp13
+ add r7, r7, #8
+ mov sp, r7
+ pop {r7, pc}
+; .size vTaskStartScheduler, .-vTaskStartScheduler
+;///////////////////////////////////////////////////////
+; .align 2
+ ALIGN 2
+; .global vTaskEndScheduler
+ GLOBAL vTaskEndScheduler
+; .thumb
+ THUMB
+; .thumb_func
+; .type vTaskEndScheduler, %function
+;vTaskEndScheduler:
+vTaskEndScheduler
+; @ args = 0, pretend = 0, frame = 0
+; @ frame_needed = 1, uses_anonymous_args = 0
+ push {r7, lr}
+ add r7, sp, #0
+;@ 546 "port_asm.c" 1
+ mov r0, #40
+ msr basepri, r0
+
+;@ 0 "" 2
+; .thumb
+ THUMB
+ movw r3, #:lower16:xSchedulerRunning
+ movt r3, #:upper16:xSchedulerRunning
+ mov r2, #0
+ str r2, [r3, #0]
+ bl vPortEndScheduler
+ pop {r7, pc}
+; .size vTaskEndScheduler, .-vTaskEndScheduler
+; .ident "GCC: (Sourcery G++ Lite 2010q1-188) 4.4.1"
+ ALIGN 2
+ nop
+ nop
+ nop
+ END
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/portable/GCC/ARM_CM3/portmacro.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/portable/GCC/ARM_CM3/portmacro.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,226 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+// Modified by Kenji Arai / JH1PJL, October 30th,2010
+
+#ifndef PORTMACRO_H
+#define PORTMACRO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * Port specific definitions.
+ *
+ * The settings in this file configure FreeRTOS correctly for the
+ * given hardware and compiler.
+ *
+ * These settings should not be altered.
+ *-----------------------------------------------------------
+ */
+
+/* Type definitions. */
+#define portCHAR char
+#define portFLOAT float
+#define portDOUBLE double
+#define portLONG long
+#define portSHORT short
+#define portSTACK_TYPE unsigned portLONG
+#define portBASE_TYPE long
+
+#if( configUSE_16_BIT_TICKS == 1 )
+ typedef unsigned portSHORT portTickType;
+ #define portMAX_DELAY ( portTickType ) 0xffff
+#else
+ typedef unsigned portLONG portTickType;
+ #define portMAX_DELAY ( portTickType ) 0xffffffff
+#endif
+/*-----------------------------------------------------------*/
+
+/* Architecture specifics. */
+#define portSTACK_GROWTH ( -1 )
+#define portTICK_RATE_MS ( ( portTickType ) 1000 / configTICK_RATE_HZ )
+#define portBYTE_ALIGNMENT 8
+/*-----------------------------------------------------------*/
+
+
+/* Scheduler utilities. */
+extern void vPortYieldFromISR( void );
+
+#define portYIELD() vPortYieldFromISR()
+
+#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) vPortYieldFromISR()
+/*-----------------------------------------------------------*/
+
+// Modified by Kenji Arai / JH1PJL, October 30th,2010
+#if 0
+/* Critical section management. */
+
+/*
+ * Set basepri to portMAX_SYSCALL_INTERRUPT_PRIORITY without effecting other
+ * registers. r0 is clobbered.
+ */
+//#define portSET_INTERRUPT_MASK() \
+ __asm volatile \
+ ( \
+ " mov r0, %0 \n" \
+ " msr basepri, r0 \n" \
+ ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY):"r0" \
+ )
+
+/*
+ * Set basepri back to 0 without effective other registers.
+ * r0 is clobbered.
+ */
+//#define portCLEAR_INTERRUPT_MASK() \
+ __asm volatile \
+ ( \
+ " mov r0, #0 \n" \
+ " msr basepri, r0 \n" \
+ :::"r0" \
+ )
+
+//#define portSET_INTERRUPT_MASK_FROM_ISR() 0;portSET_INTERRUPT_MASK()
+//#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) portCLEAR_INTERRUPT_MASK();(void)x
+
+extern void vPortEnterCritical( void );
+extern void vPortExitCritical( void );
+
+#define portDISABLE_INTERRUPTS() portSET_INTERRUPT_MASK()
+#define portENABLE_INTERRUPTS() portCLEAR_INTERRUPT_MASK()
+#define portENTER_CRITICAL() vPortEnterCritical()
+#define portEXIT_CRITICAL() vPortExitCritical()
+#else
+
+/* Critical section management. */
+
+/*
+ * Set basepri to portMAX_SYSCALL_INTERRUPT_PRIORITY without effecting other
+ * registers. r0 is clobbered.
+ */
+#define portSET_INTERRUPT_MASK() \
+ __asm volatile \
+ ( \
+ " mov r0, %0 \n" \
+ " msr basepri, r0 \n" \
+ ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY):"r0" \
+ )
+
+
+/*
+ * Set basepri back to 0 without effective other registers.
+ * r0 is clobbered.
+ */
+#define portCLEAR_INTERRUPT_MASK() \
+ __asm volatile \
+ ( \
+ " mov r0, #0 \n" \
+ " msr basepri, r0 \n" \
+ :::"r0" \
+ )
+
+
+#define portSET_INTERRUPT_MASK_FROM_ISR() 0;portSET_INTERRUPT_MASK()
+#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) portCLEAR_INTERRUPT_MASK();(void)x
+
+extern void vPortEnterCritical( void );
+extern void vPortExitCritical( void );
+
+#define portDISABLE_INTERRUPTS() portSET_INTERRUPT_MASK()
+#define portENABLE_INTERRUPTS() portCLEAR_INTERRUPT_MASK()
+#define portENTER_CRITICAL() vPortEnterCritical()
+#define portEXIT_CRITICAL() vPortExitCritical()
+
+#if 0
+/* Critical section management. */
+
+/*
+ * Set basepri to portMAX_SYSCALL_INTERRUPT_PRIORITY without effecting other
+ * registers. r0 is clobbered.
+ */
+extern void portSET_INTERRUPT_MASK( unsigned portBASE_TYPE );
+/*
+ * Set basepri back to 0 without effective other registers.
+ * r0 is clobbered.
+ */
+extern void portCLEAR_INTERRUPT_MASK( unsigned portBASE_TYPE );
+
+//extern void portCLEAR_INTERRUPT_MASK_FROM_ISR( unsigned portBASE_TYPE );
+
+extern void vPortEnterCritical( void );
+extern void vPortExitCritical( void );
+
+#define portSET_INTERRUPT_MASK_FROM_ISR() portSET_INTERRUPT_MASK(0)
+#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) portCLEAR_INTERRUPT_MASK();
+#define portDISABLE_INTERRUPTS() portSET_INTERRUPT_MASK()
+#define portENABLE_INTERRUPTS() portCLEAR_INTERRUPT_MASK()
+#define portENTER_CRITICAL() vPortEnterCritical()
+#define portEXIT_CRITICAL() vPortExitCritical()
+#endif
+
+
+#endif
+/*-----------------------------------------------------------*/
+
+/* Task function macros as described on the FreeRTOS.org WEB site. */
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
+#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
+
+#define portNOP()
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTMACRO_H */
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/portable/MemMang/heap_1.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/portable/MemMang/heap_1.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,153 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+
+/*
+ * The simplest possible implementation of pvPortMalloc(). Note that this
+ * implementation does NOT allow allocated memory to be freed again.
+ *
+ * See heap_2.c and heap_3.c for alternative implementations, and the memory
+ * management pages of http://www.FreeRTOS.org for more information.
+ */
+
+#include <stdlib.h>
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers. That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/* Allocate the memory for the heap. The struct is used to force byte
+alignment without using any non-portable code. */
+static union xRTOS_HEAP
+{
+ #if portBYTE_ALIGNMENT == 8
+ volatile portDOUBLE dDummy;
+ #else
+ volatile unsigned long ulDummy;
+ #endif
+ unsigned char ucHeap[ configTOTAL_HEAP_SIZE ];
+} xHeap;
+
+static size_t xNextFreeByte = ( size_t ) 0;
+/*-----------------------------------------------------------*/
+
+void *pvPortMalloc( size_t xWantedSize )
+{
+void *pvReturn = NULL;
+
+ /* Ensure that blocks are always aligned to the required number of bytes. */
+ #if portBYTE_ALIGNMENT != 1
+ if( xWantedSize & portBYTE_ALIGNMENT_MASK )
+ {
+ /* Byte alignment required. */
+ xWantedSize += ( portBYTE_ALIGNMENT - ( xWantedSize & portBYTE_ALIGNMENT_MASK ) );
+ }
+ #endif
+
+ vTaskSuspendAll();
+ {
+ /* Check there is enough room left for the allocation. */
+ if( ( ( xNextFreeByte + xWantedSize ) < configTOTAL_HEAP_SIZE ) &&
+ ( ( xNextFreeByte + xWantedSize ) > xNextFreeByte ) )/* Check for overflow. */
+ {
+ /* Return the next free byte then increment the index past this
+ block. */
+ pvReturn = &( xHeap.ucHeap[ xNextFreeByte ] );
+ xNextFreeByte += xWantedSize;
+ }
+ }
+ xTaskResumeAll();
+
+ #if( configUSE_MALLOC_FAILED_HOOK == 1 )
+ {
+ if( pvReturn == NULL )
+ {
+ extern void vApplicationMallocFailedHook( void );
+ vApplicationMallocFailedHook();
+ }
+ }
+ #endif
+
+ return pvReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vPortFree( void *pv )
+{
+ /* Memory cannot be freed using this scheme. See heap_2.c and heap_3.c
+ for alternative implementations, and the memory management pages of
+ http://www.FreeRTOS.org for more information. */
+ ( void ) pv;
+}
+/*-----------------------------------------------------------*/
+
+void vPortInitialiseBlocks( void )
+{
+ /* Only required when static memory is not cleared. */
+ xNextFreeByte = ( size_t ) 0;
+}
+/*-----------------------------------------------------------*/
+
+size_t xPortGetFreeHeapSize( void )
+{
+ return ( configTOTAL_HEAP_SIZE - xNextFreeByte );
+}
+
+
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/queue.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/queue.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,1541 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+#include <stdlib.h>
+#include <string.h>
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers. That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "croutine.h"
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/*-----------------------------------------------------------
+ * PUBLIC LIST API documented in list.h
+ *----------------------------------------------------------*/
+
+/* Constants used with the cRxLock and cTxLock structure members. */
+#define queueUNLOCKED ( ( signed portBASE_TYPE ) -1 )
+#define queueLOCKED_UNMODIFIED ( ( signed portBASE_TYPE ) 0 )
+
+#define queueERRONEOUS_UNBLOCK ( -1 )
+
+/* For internal use only. */
+#define queueSEND_TO_BACK ( 0 )
+#define queueSEND_TO_FRONT ( 1 )
+
+/* Effectively make a union out of the xQUEUE structure. */
+#define pxMutexHolder pcTail
+#define uxQueueType pcHead
+#define uxRecursiveCallCount pcReadFrom
+#define queueQUEUE_IS_MUTEX NULL
+
+/* Semaphores do not actually store or copy data, so have an items size of
+zero. */
+#define queueSEMAPHORE_QUEUE_ITEM_LENGTH ( 0 )
+#define queueDONT_BLOCK ( ( portTickType ) 0 )
+#define queueMUTEX_GIVE_BLOCK_TIME ( ( portTickType ) 0 )
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+/*
+ * Definition of the queue used by the scheduler.
+ * Items are queued by copy, not reference.
+ */
+typedef struct QueueDefinition
+{
+ signed char *pcHead; /*< Points to the beginning of the queue storage area. */
+ signed char *pcTail; /*< Points to the byte at the end of the queue storage area. Once more byte is allocated than necessary to store the queue items, this is used as a marker. */
+
+ signed char *pcWriteTo; /*< Points to the free next place in the storage area. */
+ signed char *pcReadFrom; /*< Points to the last place that a queued item was read from. */
+
+ xList xTasksWaitingToSend; /*< List of tasks that are blocked waiting to post onto this queue. Stored in priority order. */
+ xList xTasksWaitingToReceive; /*< List of tasks that are blocked waiting to read from this queue. Stored in priority order. */
+
+ volatile unsigned portBASE_TYPE uxMessagesWaiting;/*< The number of items currently in the queue. */
+ unsigned portBASE_TYPE uxLength; /*< The length of the queue defined as the number of items it will hold, not the number of bytes. */
+ unsigned portBASE_TYPE uxItemSize; /*< The size of each items that the queue will hold. */
+
+ signed portBASE_TYPE xRxLock; /*< Stores the number of items received from the queue (removed from the queue) while the queue was locked. Set to queueUNLOCKED when the queue is not locked. */
+ signed portBASE_TYPE xTxLock; /*< Stores the number of items transmitted to the queue (added to the queue) while the queue was locked. Set to queueUNLOCKED when the queue is not locked. */
+
+} xQUEUE;
+/*-----------------------------------------------------------*/
+
+/*
+ * Inside this file xQueueHandle is a pointer to a xQUEUE structure.
+ * To keep the definition private the API header file defines it as a
+ * pointer to void.
+ */
+typedef xQUEUE * xQueueHandle;
+
+#if 0
+/*
+ * Prototypes for public functions are included here so we don't have to
+ * include the API header file (as it defines xQueueHandle differently). These
+ * functions are documented in the API header file.
+ */
+xQueueHandle xQueueCreate( unsigned portBASE_TYPE uxQueueLength, unsigned portBASE_TYPE uxItemSize ) PRIVILEGED_FUNCTION;
+signed portBASE_TYPE xQueueGenericSend( xQueueHandle xQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition ) PRIVILEGED_FUNCTION;
+unsigned portBASE_TYPE uxQueueMessagesWaiting( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;
+void vQueueDelete( xQueueHandle xQueue ) PRIVILEGED_FUNCTION;
+signed portBASE_TYPE xQueueGenericSendFromISR( xQueueHandle pxQueue, const void * const pvItemToQueue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portBASE_TYPE xCopyPosition ) PRIVILEGED_FUNCTION;
+signed portBASE_TYPE xQueueGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking ) PRIVILEGED_FUNCTION;
+signed portBASE_TYPE xQueueReceiveFromISR( xQueueHandle pxQueue, void * const pvBuffer, signed portBASE_TYPE *pxTaskWoken ) PRIVILEGED_FUNCTION;
+xQueueHandle xQueueCreateMutex( void ) PRIVILEGED_FUNCTION;
+xQueueHandle xQueueCreateCountingSemaphore( unsigned portBASE_TYPE uxCountValue, unsigned portBASE_TYPE uxInitialCount ) PRIVILEGED_FUNCTION;
+portBASE_TYPE xQueueTakeMutexRecursive( xQueueHandle xMutex, portTickType xBlockTime ) PRIVILEGED_FUNCTION;
+portBASE_TYPE xQueueGiveMutexRecursive( xQueueHandle xMutex ) PRIVILEGED_FUNCTION;
+signed portBASE_TYPE xQueueAltGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition ) PRIVILEGED_FUNCTION;
+signed portBASE_TYPE xQueueAltGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking ) PRIVILEGED_FUNCTION;
+signed portBASE_TYPE xQueueIsQueueEmptyFromISR( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;
+signed portBASE_TYPE xQueueIsQueueFullFromISR( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;
+unsigned portBASE_TYPE uxQueueMessagesWaitingFromISR( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Co-routine queue functions differ from task queue functions. Co-routines are
+ * an optional component.
+ */
+#if configUSE_CO_ROUTINES == 1
+ signed portBASE_TYPE xQueueCRSendFromISR( xQueueHandle pxQueue, const void *pvItemToQueue, signed portBASE_TYPE xCoRoutinePreviouslyWoken ) PRIVILEGED_FUNCTION;
+ signed portBASE_TYPE xQueueCRReceiveFromISR( xQueueHandle pxQueue, void *pvBuffer, signed portBASE_TYPE *pxTaskWoken ) PRIVILEGED_FUNCTION;
+ signed portBASE_TYPE xQueueCRSend( xQueueHandle pxQueue, const void *pvItemToQueue, portTickType xTicksToWait ) PRIVILEGED_FUNCTION;
+ signed portBASE_TYPE xQueueCRReceive( xQueueHandle pxQueue, void *pvBuffer, portTickType xTicksToWait ) PRIVILEGED_FUNCTION;
+#endif
+#else
+/*
+ * Prototypes for public functions are included here so we don't have to
+ * include the API header file (as it defines xQueueHandle differently). These
+ * functions are documented in the API header file.
+ */
+xQueueHandle xQueueCreate( unsigned portBASE_TYPE uxQueueLength, unsigned portBASE_TYPE uxItemSize );
+signed portBASE_TYPE xQueueGenericSend( xQueueHandle xQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition );
+unsigned portBASE_TYPE uxQueueMessagesWaiting( const xQueueHandle pxQueue );
+void vQueueDelete( xQueueHandle xQueue );
+signed portBASE_TYPE xQueueGenericSendFromISR( xQueueHandle pxQueue, const void * const pvItemToQueue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portBASE_TYPE xCopyPosition );
+signed portBASE_TYPE xQueueGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking );
+signed portBASE_TYPE xQueueReceiveFromISR( xQueueHandle pxQueue, void * const pvBuffer, signed portBASE_TYPE *pxTaskWoken );
+xQueueHandle xQueueCreateMutex( void );
+xQueueHandle xQueueCreateCountingSemaphore( unsigned portBASE_TYPE uxCountValue, unsigned portBASE_TYPE uxInitialCount );
+portBASE_TYPE xQueueTakeMutexRecursive( xQueueHandle xMutex, portTickType xBlockTime );
+portBASE_TYPE xQueueGiveMutexRecursive( xQueueHandle xMutex );
+signed portBASE_TYPE xQueueAltGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition );
+signed portBASE_TYPE xQueueAltGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking );
+signed portBASE_TYPE xQueueIsQueueEmptyFromISR( const xQueueHandle pxQueue );
+signed portBASE_TYPE xQueueIsQueueFullFromISR( const xQueueHandle pxQueue );
+unsigned portBASE_TYPE uxQueueMessagesWaitingFromISR( const xQueueHandle pxQueue );
+
+/*
+ * Co-routine queue functions differ from task queue functions. Co-routines are
+ * an optional component.
+ */
+#if configUSE_CO_ROUTINES == 1
+ signed portBASE_TYPE xQueueCRSendFromISR( xQueueHandle pxQueue, const void *pvItemToQueue, signed portBASE_TYPE xCoRoutinePreviouslyWoken );
+ signed portBASE_TYPE xQueueCRReceiveFromISR( xQueueHandle pxQueue, void *pvBuffer, signed portBASE_TYPE *pxTaskWoken );
+ signed portBASE_TYPE xQueueCRSend( xQueueHandle pxQueue, const void *pvItemToQueue, portTickType xTicksToWait );
+ signed portBASE_TYPE xQueueCRReceive( xQueueHandle pxQueue, void *pvBuffer, portTickType xTicksToWait );
+#endif
+#endif
+/*
+ * The queue registry is just a means for kernel aware debuggers to locate
+ * queue structures. It has no other purpose so is an optional component.
+ */
+//#if configQUEUE_REGISTRY_SIZE > 0
+
+ /* The type stored within the queue registry array. This allows a name
+ to be assigned to each queue making kernel aware debugging a little
+ more user friendly. */
+ typedef struct QUEUE_REGISTRY_ITEM
+ {
+ signed char *pcQueueName;
+ xQueueHandle xHandle;
+ } xQueueRegistryItem;
+
+ /* The queue registry is simply an array of xQueueRegistryItem structures.
+ The pcQueueName member of a structure being NULL is indicative of the
+ array position being vacant. */
+ xQueueRegistryItem xQueueRegistry[ configQUEUE_REGISTRY_SIZE ];
+
+ /* Removes a queue from the registry by simply setting the pcQueueName
+ member to NULL. */
+ static void vQueueUnregisterQueue( xQueueHandle xQueue ) PRIVILEGED_FUNCTION;
+ //void vQueueAddToRegistry( xQueueHandle xQueue, signed char *pcQueueName ) PRIVILEGED_FUNCTION;
+ extern void vQueueAddToRegistry( xQueueHandle xQueue, signed char *pcQueueName );
+//#endif
+
+/*
+ * Unlocks a queue locked by a call to prvLockQueue. Locking a queue does not
+ * prevent an ISR from adding or removing items to the queue, but does prevent
+ * an ISR from removing tasks from the queue event lists. If an ISR finds a
+ * queue is locked it will instead increment the appropriate queue lock count
+ * to indicate that a task may require unblocking. When the queue in unlocked
+ * these lock counts are inspected, and the appropriate action taken.
+ */
+static void prvUnlockQueue( xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Uses a critical section to determine if there is any data in a queue.
+ *
+ * @return pdTRUE if the queue contains no items, otherwise pdFALSE.
+ */
+static signed portBASE_TYPE prvIsQueueEmpty( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Uses a critical section to determine if there is any space in a queue.
+ *
+ * @return pdTRUE if there is no space, otherwise pdFALSE;
+ */
+static signed portBASE_TYPE prvIsQueueFull( const xQueueHandle pxQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Copies an item into the queue, either at the front of the queue or the
+ * back of the queue.
+ */
+#if 0
+static void prvCopyDataToQueue( xQUEUE *pxQueue, const void *pvItemToQueue, portBASE_TYPE xPosition ) PRIVILEGED_FUNCTION;
+#else
+void prvCopyDataToQueue( xQUEUE *pxQueue, const void *pvItemToQueue, portBASE_TYPE xPosition );
+#endif
+/*
+ * Copies an item out of a queue.
+ */
+// Modified by Kenji Arai / JH1PJL, October 31st,2010
+#if 0
+static void prvCopyDataFromQueue( xQUEUE * const pxQueue, const void *pvBuffer ) PRIVILEGED_FUNCTION;
+#else
+void prvCopyDataFromQueue( xQUEUE * const pxQueue, const void *pvBuffer );
+#endif
+/*-----------------------------------------------------------*/
+
+/*
+ * Macro to mark a queue as locked. Locking a queue prevents an ISR from
+ * accessing the queue event lists.
+ */
+#define prvLockQueue( pxQueue ) \
+{ \
+ taskENTER_CRITICAL(); \
+ { \
+ if( pxQueue->xRxLock == queueUNLOCKED ) \
+ { \
+ pxQueue->xRxLock = queueLOCKED_UNMODIFIED; \
+ } \
+ if( pxQueue->xTxLock == queueUNLOCKED ) \
+ { \
+ pxQueue->xTxLock = queueLOCKED_UNMODIFIED; \
+ } \
+ } \
+ taskEXIT_CRITICAL(); \
+}
+/*-----------------------------------------------------------*/
+
+#ifdef __cplusplus
+}
+#endif
+/*-----------------------------------------------------------
+ * PUBLIC QUEUE MANAGEMENT API documented in queue.h
+ *----------------------------------------------------------*/
+
+xQueueHandle xQueueCreate( unsigned portBASE_TYPE uxQueueLength, unsigned portBASE_TYPE uxItemSize )
+{
+xQUEUE *pxNewQueue;
+size_t xQueueSizeInBytes;
+
+ /* Allocate the new queue structure. */
+ if( uxQueueLength > ( unsigned portBASE_TYPE ) 0 )
+ {
+ pxNewQueue = ( xQUEUE * ) pvPortMalloc( sizeof( xQUEUE ) );
+ if( pxNewQueue != NULL )
+ {
+ /* Create the list of pointers to queue items. The queue is one byte
+ longer than asked for to make wrap checking easier/faster. */
+ xQueueSizeInBytes = ( size_t ) ( uxQueueLength * uxItemSize ) + ( size_t ) 1;
+
+ pxNewQueue->pcHead = ( signed char * ) pvPortMalloc( xQueueSizeInBytes );
+ if( pxNewQueue->pcHead != NULL )
+ {
+ /* Initialise the queue members as described above where the
+ queue type is defined. */
+ pxNewQueue->pcTail = pxNewQueue->pcHead + ( uxQueueLength * uxItemSize );
+ pxNewQueue->uxMessagesWaiting = 0;
+ pxNewQueue->pcWriteTo = pxNewQueue->pcHead;
+ pxNewQueue->pcReadFrom = pxNewQueue->pcHead + ( ( uxQueueLength - 1 ) * uxItemSize );
+ pxNewQueue->uxLength = uxQueueLength;
+ pxNewQueue->uxItemSize = uxItemSize;
+ pxNewQueue->xRxLock = queueUNLOCKED;
+ pxNewQueue->xTxLock = queueUNLOCKED;
+
+ /* Likewise ensure the event queues start with the correct state. */
+ vListInitialise( &( pxNewQueue->xTasksWaitingToSend ) );
+ vListInitialise( &( pxNewQueue->xTasksWaitingToReceive ) );
+
+ traceQUEUE_CREATE( pxNewQueue );
+ return pxNewQueue;
+ }
+ else
+ {
+ traceQUEUE_CREATE_FAILED();
+ vPortFree( pxNewQueue );
+ }
+ }
+ }
+
+ /* Will only reach here if we could not allocate enough memory or no memory
+ was required. */
+ return NULL;
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_MUTEXES == 1 )
+
+ xQueueHandle xQueueCreateMutex( void )
+ {
+ xQUEUE *pxNewQueue;
+
+ /* Allocate the new queue structure. */
+ pxNewQueue = ( xQUEUE * ) pvPortMalloc( sizeof( xQUEUE ) );
+ if( pxNewQueue != NULL )
+ {
+ /* Information required for priority inheritance. */
+ pxNewQueue->pxMutexHolder = NULL;
+ pxNewQueue->uxQueueType = queueQUEUE_IS_MUTEX;
+
+ /* Queues used as a mutex no data is actually copied into or out
+ of the queue. */
+ pxNewQueue->pcWriteTo = NULL;
+ pxNewQueue->pcReadFrom = NULL;
+
+ /* Each mutex has a length of 1 (like a binary semaphore) and
+ an item size of 0 as nothing is actually copied into or out
+ of the mutex. */
+ pxNewQueue->uxMessagesWaiting = 0;
+ pxNewQueue->uxLength = 1;
+ pxNewQueue->uxItemSize = 0;
+ pxNewQueue->xRxLock = queueUNLOCKED;
+ pxNewQueue->xTxLock = queueUNLOCKED;
+
+ /* Ensure the event queues start with the correct state. */
+ vListInitialise( &( pxNewQueue->xTasksWaitingToSend ) );
+ vListInitialise( &( pxNewQueue->xTasksWaitingToReceive ) );
+
+ /* Start with the semaphore in the expected state. */
+ xQueueGenericSend( pxNewQueue, NULL, 0, queueSEND_TO_BACK );
+
+ traceCREATE_MUTEX( pxNewQueue );
+ }
+ else
+ {
+ traceCREATE_MUTEX_FAILED();
+ }
+
+ return pxNewQueue;
+ }
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if configUSE_RECURSIVE_MUTEXES == 1
+
+ portBASE_TYPE xQueueGiveMutexRecursive( xQueueHandle pxMutex )
+ {
+ portBASE_TYPE xReturn;
+
+ /* If this is the task that holds the mutex then pxMutexHolder will not
+ change outside of this task. If this task does not hold the mutex then
+ pxMutexHolder can never coincidentally equal the tasks handle, and as
+ this is the only condition we are interested in it does not matter if
+ pxMutexHolder is accessed simultaneously by another task. Therefore no
+ mutual exclusion is required to test the pxMutexHolder variable. */
+ if( pxMutex->pxMutexHolder == xTaskGetCurrentTaskHandle() )
+ {
+ traceGIVE_MUTEX_RECURSIVE( pxMutex );
+
+ /* uxRecursiveCallCount cannot be zero if pxMutexHolder is equal to
+ the task handle, therefore no underflow check is required. Also,
+ uxRecursiveCallCount is only modified by the mutex holder, and as
+ there can only be one, no mutual exclusion is required to modify the
+ uxRecursiveCallCount member. */
+ ( pxMutex->uxRecursiveCallCount )--;
+
+ /* Have we unwound the call count? */
+ if( pxMutex->uxRecursiveCallCount == 0 )
+ {
+ /* Return the mutex. This will automatically unblock any other
+ task that might be waiting to access the mutex. */
+ xQueueGenericSend( pxMutex, NULL, queueMUTEX_GIVE_BLOCK_TIME, queueSEND_TO_BACK );
+ }
+
+ xReturn = pdPASS;
+ }
+ else
+ {
+ /* We cannot give the mutex because we are not the holder. */
+ xReturn = pdFAIL;
+
+ traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex );
+ }
+
+ return xReturn;
+ }
+
+#endif /* configUSE_RECURSIVE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if configUSE_RECURSIVE_MUTEXES == 1
+
+ portBASE_TYPE xQueueTakeMutexRecursive( xQueueHandle pxMutex, portTickType xBlockTime )
+ {
+ portBASE_TYPE xReturn;
+
+ /* Comments regarding mutual exclusion as per those within
+ xQueueGiveMutexRecursive(). */
+
+ traceTAKE_MUTEX_RECURSIVE( pxMutex );
+
+ if( pxMutex->pxMutexHolder == xTaskGetCurrentTaskHandle() )
+ {
+ ( pxMutex->uxRecursiveCallCount )++;
+ xReturn = pdPASS;
+ }
+ else
+ {
+ xReturn = xQueueGenericReceive( pxMutex, NULL, xBlockTime, pdFALSE );
+
+ /* pdPASS will only be returned if we successfully obtained the mutex,
+ we may have blocked to reach here. */
+ if( xReturn == pdPASS )
+ {
+ ( pxMutex->uxRecursiveCallCount )++;
+ }
+ }
+
+ return xReturn;
+ }
+
+#endif /* configUSE_RECURSIVE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if configUSE_COUNTING_SEMAPHORES == 1
+
+ xQueueHandle xQueueCreateCountingSemaphore( unsigned portBASE_TYPE uxCountValue, unsigned portBASE_TYPE uxInitialCount )
+ {
+ xQueueHandle pxHandle;
+
+ pxHandle = xQueueCreate( ( unsigned portBASE_TYPE ) uxCountValue, queueSEMAPHORE_QUEUE_ITEM_LENGTH );
+
+ if( pxHandle != NULL )
+ {
+ pxHandle->uxMessagesWaiting = uxInitialCount;
+
+ traceCREATE_COUNTING_SEMAPHORE();
+ }
+ else
+ {
+ traceCREATE_COUNTING_SEMAPHORE_FAILED();
+ }
+
+ return pxHandle;
+ }
+
+#endif /* configUSE_COUNTING_SEMAPHORES */
+/*-----------------------------------------------------------*/
+
+signed portBASE_TYPE xQueueGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition )
+{
+signed portBASE_TYPE xEntryTimeSet = pdFALSE;
+xTimeOutType xTimeOut;
+
+ /* This function relaxes the coding standard somewhat to allow return
+ statements within the function itself. This is done in the interest
+ of execution time efficiency. */
+ for( ;; )
+ {
+ taskENTER_CRITICAL();
+ {
+ /* Is there room on the queue now? To be running we must be
+ the highest priority task wanting to access the queue. */
+ if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
+ {
+ traceQUEUE_SEND( pxQueue );
+ prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );
+
+ /* If there was a task waiting for data to arrive on the
+ queue then unblock it now. */
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) == pdTRUE )
+ {
+ /* The unblocked task has a priority higher than
+ our own so yield immediately. Yes it is ok to do
+ this from within the critical section - the kernel
+ takes care of that. */
+ portYIELD_WITHIN_API();
+ }
+ }
+
+ taskEXIT_CRITICAL();
+
+ /* Return to the original privilege level before exiting the
+ function. */
+ return pdPASS;
+ }
+ else
+ {
+ if( xTicksToWait == ( portTickType ) 0 )
+ {
+ /* The queue was full and no block time is specified (or
+ the block time has expired) so leave now. */
+ taskEXIT_CRITICAL();
+
+ /* Return to the original privilege level before exiting
+ the function. */
+ traceQUEUE_SEND_FAILED( pxQueue );
+ return errQUEUE_FULL;
+ }
+ else if( xEntryTimeSet == pdFALSE )
+ {
+ /* The queue was full and a block time was specified so
+ configure the timeout structure. */
+ vTaskSetTimeOutState( &xTimeOut );
+ xEntryTimeSet = pdTRUE;
+ }
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ /* Interrupts and other tasks can send to and receive from the queue
+ now the critical section has been exited. */
+
+ vTaskSuspendAll();
+ prvLockQueue( pxQueue );
+
+ /* Update the timeout state to see if it has expired yet. */
+ if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
+ {
+ if( prvIsQueueFull( pxQueue ) )
+ {
+ traceBLOCKING_ON_QUEUE_SEND( pxQueue );
+ vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToSend ), xTicksToWait );
+
+ /* Unlocking the queue means queue events can effect the
+ event list. It is possible that interrupts occurring now
+ remove this task from the event list again - but as the
+ scheduler is suspended the task will go onto the pending
+ ready last instead of the actual ready list. */
+ prvUnlockQueue( pxQueue );
+
+ /* Resuming the scheduler will move tasks from the pending
+ ready list into the ready list - so it is feasible that this
+ task is already in a ready list before it yields - in which
+ case the yield will not cause a context switch unless there
+ is also a higher priority task in the pending ready list. */
+ if( !xTaskResumeAll() )
+ {
+ portYIELD_WITHIN_API();
+ }
+ }
+ else
+ {
+ /* Try again. */
+ prvUnlockQueue( pxQueue );
+ ( void ) xTaskResumeAll();
+ }
+ }
+ else
+ {
+ /* The timeout has expired. */
+ prvUnlockQueue( pxQueue );
+ ( void ) xTaskResumeAll();
+
+ /* Return to the original privilege level before exiting the
+ function. */
+ traceQUEUE_SEND_FAILED( pxQueue );
+ return errQUEUE_FULL;
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+#if configUSE_ALTERNATIVE_API == 1
+
+ signed portBASE_TYPE xQueueAltGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition )
+ {
+ signed portBASE_TYPE xEntryTimeSet = pdFALSE;
+ xTimeOutType xTimeOut;
+
+ for( ;; )
+ {
+ taskENTER_CRITICAL();
+ {
+ /* Is there room on the queue now? To be running we must be
+ the highest priority task wanting to access the queue. */
+ if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
+ {
+ traceQUEUE_SEND( pxQueue );
+ prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );
+
+ /* If there was a task waiting for data to arrive on the
+ queue then unblock it now. */
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) == pdTRUE )
+ {
+ /* The unblocked task has a priority higher than
+ our own so yield immediately. */
+ portYIELD_WITHIN_API();
+ }
+ }
+
+ taskEXIT_CRITICAL();
+ return pdPASS;
+ }
+ else
+ {
+ if( xTicksToWait == ( portTickType ) 0 )
+ {
+ taskEXIT_CRITICAL();
+ return errQUEUE_FULL;
+ }
+ else if( xEntryTimeSet == pdFALSE )
+ {
+ vTaskSetTimeOutState( &xTimeOut );
+ xEntryTimeSet = pdTRUE;
+ }
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ taskENTER_CRITICAL();
+ {
+ if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
+ {
+ if( prvIsQueueFull( pxQueue ) )
+ {
+ traceBLOCKING_ON_QUEUE_SEND( pxQueue );
+ vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToSend ), xTicksToWait );
+ portYIELD_WITHIN_API();
+ }
+ }
+ else
+ {
+ taskEXIT_CRITICAL();
+ traceQUEUE_SEND_FAILED( pxQueue );
+ return errQUEUE_FULL;
+ }
+ }
+ taskEXIT_CRITICAL();
+ }
+ }
+
+#endif /* configUSE_ALTERNATIVE_API */
+/*-----------------------------------------------------------*/
+
+#if configUSE_ALTERNATIVE_API == 1
+
+ signed portBASE_TYPE xQueueAltGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking )
+ {
+ signed portBASE_TYPE xEntryTimeSet = pdFALSE;
+ xTimeOutType xTimeOut;
+ signed char *pcOriginalReadPosition;
+
+ for( ;; )
+ {
+ taskENTER_CRITICAL();
+ {
+ if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )
+ {
+ /* Remember our read position in case we are just peeking. */
+ pcOriginalReadPosition = pxQueue->pcReadFrom;
+
+ prvCopyDataFromQueue( pxQueue, pvBuffer );
+
+ if( xJustPeeking == pdFALSE )
+ {
+ traceQUEUE_RECEIVE( pxQueue );
+
+ /* We are actually removing data. */
+ --( pxQueue->uxMessagesWaiting );
+
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+ {
+ /* Record the information required to implement
+ priority inheritance should it become necessary. */
+ pxQueue->pxMutexHolder = xTaskGetCurrentTaskHandle();
+ }
+ }
+ #endif
+
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) == pdTRUE )
+ {
+ portYIELD_WITHIN_API();
+ }
+ }
+ }
+ else
+ {
+ traceQUEUE_PEEK( pxQueue );
+
+ /* We are not removing the data, so reset our read
+ pointer. */
+ pxQueue->pcReadFrom = pcOriginalReadPosition;
+
+ /* The data is being left in the queue, so see if there are
+ any other tasks waiting for the data. */
+ if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) )
+ {
+ /* Tasks that are removed from the event list will get added to
+ the pending ready list as the scheduler is still suspended. */
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority than this task. */
+ portYIELD_WITHIN_API();
+ }
+ }
+
+ }
+
+ taskEXIT_CRITICAL();
+ return pdPASS;
+ }
+ else
+ {
+ if( xTicksToWait == ( portTickType ) 0 )
+ {
+ taskEXIT_CRITICAL();
+ traceQUEUE_RECEIVE_FAILED( pxQueue );
+ return errQUEUE_EMPTY;
+ }
+ else if( xEntryTimeSet == pdFALSE )
+ {
+ vTaskSetTimeOutState( &xTimeOut );
+ xEntryTimeSet = pdTRUE;
+ }
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ taskENTER_CRITICAL();
+ {
+ if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
+ {
+ if( prvIsQueueEmpty( pxQueue ) )
+ {
+ traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue );
+
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+ {
+ portENTER_CRITICAL();
+ vTaskPriorityInherit( ( void * ) pxQueue->pxMutexHolder );
+ portEXIT_CRITICAL();
+ }
+ }
+ #endif
+
+ vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );
+ portYIELD_WITHIN_API();
+ }
+ }
+ else
+ {
+ taskEXIT_CRITICAL();
+ traceQUEUE_RECEIVE_FAILED( pxQueue );
+ return errQUEUE_EMPTY;
+ }
+ }
+ taskEXIT_CRITICAL();
+ }
+ }
+
+
+#endif /* configUSE_ALTERNATIVE_API */
+/*-----------------------------------------------------------*/
+
+// Modified by Kenji Arai / JH1PJL, October 30th,2010
+// move to port_asm.c
+#if 0
+signed portBASE_TYPE xQueueGenericSendFromISR( xQueueHandle pxQueue, const void * const pvItemToQueue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portBASE_TYPE xCopyPosition )
+{
+signed portBASE_TYPE xReturn;
+unsigned portBASE_TYPE uxSavedInterruptStatus;
+
+ /* Similar to xQueueGenericSend, except we don't block if there is no room
+ in the queue. Also we don't directly wake a task that was blocked on a
+ queue read, instead we return a flag to say whether a context switch is
+ required or not (i.e. has a task with a higher priority than us been woken
+ by this post). */
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+ {
+ if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
+ {
+ traceQUEUE_SEND_FROM_ISR( pxQueue );
+
+ prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );
+
+ /* If the queue is locked we do not alter the event list. This will
+ be done when the queue is unlocked later. */
+ if( pxQueue->xTxLock == queueUNLOCKED )
+ {
+ if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority so record that a
+ context switch is required. */
+ *pxHigherPriorityTaskWoken = pdTRUE;
+ }
+ }
+ }
+ else
+ {
+ /* Increment the lock count so the task that unlocks the queue
+ knows that data was posted while it was locked. */
+ ++( pxQueue->xTxLock );
+ }
+
+ xReturn = pdPASS;
+ }
+ else
+ {
+ traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue );
+ xReturn = errQUEUE_FULL;
+ }
+ }
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+#endif
+
+signed portBASE_TYPE xQueueGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking )
+{
+signed portBASE_TYPE xEntryTimeSet = pdFALSE;
+xTimeOutType xTimeOut;
+signed char *pcOriginalReadPosition;
+
+ /* This function relaxes the coding standard somewhat to allow return
+ statements within the function itself. This is done in the interest
+ of execution time efficiency. */
+
+ for( ;; )
+ {
+ taskENTER_CRITICAL();
+ {
+ /* Is there data in the queue now? To be running we must be
+ the highest priority task wanting to access the queue. */
+ if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )
+ {
+ /* Remember our read position in case we are just peeking. */
+ pcOriginalReadPosition = pxQueue->pcReadFrom;
+
+ prvCopyDataFromQueue( pxQueue, pvBuffer );
+
+ if( xJustPeeking == pdFALSE )
+ {
+ traceQUEUE_RECEIVE( pxQueue );
+
+ /* We are actually removing data. */
+ --( pxQueue->uxMessagesWaiting );
+
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+ {
+ /* Record the information required to implement
+ priority inheritance should it become necessary. */
+ // Modified by Kenji Arai / JH1PJL, October 31st,2010
+ pxQueue->pxMutexHolder = (signed char *) xTaskGetCurrentTaskHandle();
+ }
+ }
+ #endif
+
+ if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) == pdTRUE )
+ {
+ portYIELD_WITHIN_API();
+ }
+ }
+ }
+ else
+ {
+ traceQUEUE_PEEK( pxQueue );
+
+ /* We are not removing the data, so reset our read
+ pointer. */
+ pxQueue->pcReadFrom = pcOriginalReadPosition;
+
+ /* The data is being left in the queue, so see if there are
+ any other tasks waiting for the data. */
+ if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) )
+ {
+ /* Tasks that are removed from the event list will get added to
+ the pending ready list as the scheduler is still suspended. */
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority than this task. */
+ portYIELD_WITHIN_API();
+ }
+ }
+
+ }
+
+ taskEXIT_CRITICAL();
+ return pdPASS;
+ }
+ else
+ {
+ if( xTicksToWait == ( portTickType ) 0 )
+ {
+ /* The queue was empty and no block time is specified (or
+ the block time has expired) so leave now. */
+ taskEXIT_CRITICAL();
+ traceQUEUE_RECEIVE_FAILED( pxQueue );
+ return errQUEUE_EMPTY;
+ }
+ else if( xEntryTimeSet == pdFALSE )
+ {
+ /* The queue was empty and a block time was specified so
+ configure the timeout structure. */
+ vTaskSetTimeOutState( &xTimeOut );
+ xEntryTimeSet = pdTRUE;
+ }
+ }
+ }
+ taskEXIT_CRITICAL();
+
+ /* Interrupts and other tasks can send to and receive from the queue
+ now the critical section has been exited. */
+
+ vTaskSuspendAll();
+ prvLockQueue( pxQueue );
+
+ /* Update the timeout state to see if it has expired yet. */
+ if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
+ {
+ if( prvIsQueueEmpty( pxQueue ) )
+ {
+ traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue );
+
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+ {
+ portENTER_CRITICAL();
+ {
+ // Modified by Kenji Arai / JH1PJL, October 31st,2010
+ //vTaskPriorityInherit( ( void * ) pxQueue->pxMutexHolder );
+ vTaskPriorityInherit( ( xTaskHandle * ) pxQueue->pxMutexHolder );
+ }
+ portEXIT_CRITICAL();
+ }
+ }
+ #endif
+
+ vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );
+ prvUnlockQueue( pxQueue );
+ if( !xTaskResumeAll() )
+ {
+ portYIELD_WITHIN_API();
+ }
+ }
+ else
+ {
+ /* Try again. */
+ prvUnlockQueue( pxQueue );
+ ( void ) xTaskResumeAll();
+ }
+ }
+ else
+ {
+ prvUnlockQueue( pxQueue );
+ ( void ) xTaskResumeAll();
+ traceQUEUE_RECEIVE_FAILED( pxQueue );
+ return errQUEUE_EMPTY;
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+// Modified by Kenji Arai / JH1PJL, October 30th,2010
+// move to port_asm.c
+#if 0
+signed portBASE_TYPE xQueueReceiveFromISR( xQueueHandle pxQueue, void * const pvBuffer, signed portBASE_TYPE *pxTaskWoken )
+{
+signed portBASE_TYPE xReturn;
+unsigned portBASE_TYPE uxSavedInterruptStatus;
+
+ uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+ {
+ /* We cannot block from an ISR, so check there is data available. */
+ if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )
+ {
+ traceQUEUE_RECEIVE_FROM_ISR( pxQueue );
+
+ prvCopyDataFromQueue( pxQueue, pvBuffer );
+ --( pxQueue->uxMessagesWaiting );
+
+ /* If the queue is locked we will not modify the event list. Instead
+ we update the lock count so the task that unlocks the queue will know
+ that an ISR has removed data while the queue was locked. */
+ if( pxQueue->xRxLock == queueUNLOCKED )
+ {
+ if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority than us so
+ force a context switch. */
+ *pxTaskWoken = pdTRUE;
+ }
+ }
+ }
+ else
+ {
+ /* Increment the lock count so the task that unlocks the queue
+ knows that data was removed while it was locked. */
+ ++( pxQueue->xRxLock );
+ }
+
+ xReturn = pdPASS;
+ }
+ else
+ {
+ xReturn = pdFAIL;
+ traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue );
+ }
+ }
+ portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+#endif
+
+unsigned portBASE_TYPE uxQueueMessagesWaiting( const xQueueHandle pxQueue )
+{
+unsigned portBASE_TYPE uxReturn;
+
+ taskENTER_CRITICAL();
+ uxReturn = pxQueue->uxMessagesWaiting;
+ taskEXIT_CRITICAL();
+
+ return uxReturn;
+}
+/*-----------------------------------------------------------*/
+
+unsigned portBASE_TYPE uxQueueMessagesWaitingFromISR( const xQueueHandle pxQueue )
+{
+unsigned portBASE_TYPE uxReturn;
+
+ uxReturn = pxQueue->uxMessagesWaiting;
+
+ return uxReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vQueueDelete( xQueueHandle pxQueue )
+{
+ traceQUEUE_DELETE( pxQueue );
+ vQueueUnregisterQueue( pxQueue );
+ vPortFree( pxQueue->pcHead );
+ vPortFree( pxQueue );
+}
+/*-----------------------------------------------------------*/
+
+// Modified by Kenji Arai / JH1PJL, October 31st,2010
+#if 0
+static void prvCopyDataToQueue( xQUEUE *pxQueue, const void *pvItemToQueue, portBASE_TYPE xPosition )
+#else
+void prvCopyDataToQueue( xQUEUE *pxQueue, const void *pvItemToQueue, portBASE_TYPE xPosition )
+#endif
+{
+ if( pxQueue->uxItemSize == ( unsigned portBASE_TYPE ) 0 )
+ {
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+ {
+ /* The mutex is no longer being held. */
+ // Modified by Kenji Arai / JH1PJL, October 31st,2010
+ //vTaskPriorityDisinherit( ( void * ) pxQueue->pxMutexHolder );
+ vTaskPriorityDisinherit( ( xTaskHandle * ) pxQueue->pxMutexHolder );
+ pxQueue->pxMutexHolder = NULL;
+ }
+ }
+ #endif
+ }
+ else if( xPosition == queueSEND_TO_BACK )
+ {
+ memcpy( ( void * ) pxQueue->pcWriteTo, pvItemToQueue, ( unsigned ) pxQueue->uxItemSize );
+ pxQueue->pcWriteTo += pxQueue->uxItemSize;
+ if( pxQueue->pcWriteTo >= pxQueue->pcTail )
+ {
+ pxQueue->pcWriteTo = pxQueue->pcHead;
+ }
+ }
+ else
+ {
+ memcpy( ( void * ) pxQueue->pcReadFrom, pvItemToQueue, ( unsigned ) pxQueue->uxItemSize );
+ pxQueue->pcReadFrom -= pxQueue->uxItemSize;
+ if( pxQueue->pcReadFrom < pxQueue->pcHead )
+ {
+ pxQueue->pcReadFrom = ( pxQueue->pcTail - pxQueue->uxItemSize );
+ }
+ }
+
+ ++( pxQueue->uxMessagesWaiting );
+}
+/*-----------------------------------------------------------*/
+
+// Modified by Kenji Arai / JH1PJL, October 31st,2010
+#if 0
+static void prvCopyDataFromQueue( xQUEUE * const pxQueue, const void *pvBuffer )
+#else
+void prvCopyDataFromQueue( xQUEUE * const pxQueue, const void *pvBuffer )
+#endif
+{
+ if( pxQueue->uxQueueType != queueQUEUE_IS_MUTEX )
+ {
+ pxQueue->pcReadFrom += pxQueue->uxItemSize;
+ if( pxQueue->pcReadFrom >= pxQueue->pcTail )
+ {
+ pxQueue->pcReadFrom = pxQueue->pcHead;
+ }
+ memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->pcReadFrom, ( unsigned ) pxQueue->uxItemSize );
+ }
+}
+/*-----------------------------------------------------------*/
+
+// Modified by Kenji Arai / JH1PJL, October 31st,2010
+#if 0
+static void prvUnlockQueue( xQueueHandle pxQueue )
+#else
+void prvUnlockQueue( xQueueHandle pxQueue )
+#endif
+{
+ /* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED. */
+
+ /* The lock counts contains the number of extra data items placed or
+ removed from the queue while the queue was locked. When a queue is
+ locked items can be added or removed, but the event lists cannot be
+ updated. */
+ taskENTER_CRITICAL();
+ {
+ /* See if data was added to the queue while it was locked. */
+ while( pxQueue->xTxLock > queueLOCKED_UNMODIFIED )
+ {
+ /* Data was posted while the queue was locked. Are any tasks
+ blocked waiting for data to become available? */
+ if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) )
+ {
+ /* Tasks that are removed from the event list will get added to
+ the pending ready list as the scheduler is still suspended. */
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The task waiting has a higher priority so record that a
+ context switch is required. */
+ vTaskMissedYield();
+ }
+
+ --( pxQueue->xTxLock );
+ }
+ else
+ {
+ break;
+ }
+ }
+
+ pxQueue->xTxLock = queueUNLOCKED;
+ }
+ taskEXIT_CRITICAL();
+
+ /* Do the same for the Rx lock. */
+ taskENTER_CRITICAL();
+ {
+ while( pxQueue->xRxLock > queueLOCKED_UNMODIFIED )
+ {
+ if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) )
+ {
+ if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+ {
+ vTaskMissedYield();
+ }
+
+ --( pxQueue->xRxLock );
+ }
+ else
+ {
+ break;
+ }
+ }
+
+ pxQueue->xRxLock = queueUNLOCKED;
+ }
+ taskEXIT_CRITICAL();
+}
+/*-----------------------------------------------------------*/
+
+static signed portBASE_TYPE prvIsQueueEmpty( const xQueueHandle pxQueue )
+{
+signed portBASE_TYPE xReturn;
+
+ taskENTER_CRITICAL();
+ xReturn = ( pxQueue->uxMessagesWaiting == ( unsigned portBASE_TYPE ) 0 );
+ taskEXIT_CRITICAL();
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+signed portBASE_TYPE xQueueIsQueueEmptyFromISR( const xQueueHandle pxQueue )
+{
+signed portBASE_TYPE xReturn;
+
+ xReturn = ( pxQueue->uxMessagesWaiting == ( unsigned portBASE_TYPE ) 0 );
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+static signed portBASE_TYPE prvIsQueueFull( const xQueueHandle pxQueue )
+{
+signed portBASE_TYPE xReturn;
+
+ taskENTER_CRITICAL();
+ xReturn = ( pxQueue->uxMessagesWaiting == pxQueue->uxLength );
+ taskEXIT_CRITICAL();
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+signed portBASE_TYPE xQueueIsQueueFullFromISR( const xQueueHandle pxQueue )
+{
+signed portBASE_TYPE xReturn;
+
+ xReturn = ( pxQueue->uxMessagesWaiting == pxQueue->uxLength );
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+#if configUSE_CO_ROUTINES == 1
+signed portBASE_TYPE xQueueCRSend( xQueueHandle pxQueue, const void *pvItemToQueue, portTickType xTicksToWait )
+{
+signed portBASE_TYPE xReturn;
+
+ /* If the queue is already full we may have to block. A critical section
+ is required to prevent an interrupt removing something from the queue
+ between the check to see if the queue is full and blocking on the queue. */
+ portDISABLE_INTERRUPTS();
+ {
+ if( prvIsQueueFull( pxQueue ) )
+ {
+ /* The queue is full - do we want to block or just leave without
+ posting? */
+ if( xTicksToWait > ( portTickType ) 0 )
+ {
+ /* As this is called from a coroutine we cannot block directly, but
+ return indicating that we need to block. */
+ vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToSend ) );
+ portENABLE_INTERRUPTS();
+ return errQUEUE_BLOCKED;
+ }
+ else
+ {
+ portENABLE_INTERRUPTS();
+ return errQUEUE_FULL;
+ }
+ }
+ }
+ portENABLE_INTERRUPTS();
+
+ portNOP();
+
+ portDISABLE_INTERRUPTS();
+ {
+ if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
+ {
+ /* There is room in the queue, copy the data into the queue. */
+ prvCopyDataToQueue( pxQueue, pvItemToQueue, queueSEND_TO_BACK );
+ xReturn = pdPASS;
+
+ /* Were any co-routines waiting for data to become available? */
+ if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) )
+ {
+ /* In this instance the co-routine could be placed directly
+ into the ready list as we are within a critical section.
+ Instead the same pending ready list mechanism is used as if
+ the event were caused from within an interrupt. */
+ if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ /* The co-routine waiting has a higher priority so record
+ that a yield might be appropriate. */
+ xReturn = errQUEUE_YIELD;
+ }
+ }
+ }
+ else
+ {
+ xReturn = errQUEUE_FULL;
+ }
+ }
+ portENABLE_INTERRUPTS();
+
+ return xReturn;
+}
+#endif
+/*-----------------------------------------------------------*/
+
+#if configUSE_CO_ROUTINES == 1
+signed portBASE_TYPE xQueueCRReceive( xQueueHandle pxQueue, void *pvBuffer, portTickType xTicksToWait )
+{
+signed portBASE_TYPE xReturn;
+
+ /* If the queue is already empty we may have to block. A critical section
+ is required to prevent an interrupt adding something to the queue
+ between the check to see if the queue is empty and blocking on the queue. */
+ portDISABLE_INTERRUPTS();
+ {
+ if( pxQueue->uxMessagesWaiting == ( unsigned portBASE_TYPE ) 0 )
+ {
+ /* There are no messages in the queue, do we want to block or just
+ leave with nothing? */
+ if( xTicksToWait > ( portTickType ) 0 )
+ {
+ /* As this is a co-routine we cannot block directly, but return
+ indicating that we need to block. */
+ vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToReceive ) );
+ portENABLE_INTERRUPTS();
+ return errQUEUE_BLOCKED;
+ }
+ else
+ {
+ portENABLE_INTERRUPTS();
+ return errQUEUE_FULL;
+ }
+ }
+ }
+ portENABLE_INTERRUPTS();
+
+ portNOP();
+
+ portDISABLE_INTERRUPTS();
+ {
+ if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )
+ {
+ /* Data is available from the queue. */
+ pxQueue->pcReadFrom += pxQueue->uxItemSize;
+ if( pxQueue->pcReadFrom >= pxQueue->pcTail )
+ {
+ pxQueue->pcReadFrom = pxQueue->pcHead;
+ }
+ --( pxQueue->uxMessagesWaiting );
+ memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->pcReadFrom, ( unsigned ) pxQueue->uxItemSize );
+
+ xReturn = pdPASS;
+
+ /* Were any co-routines waiting for space to become available? */
+ if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) )
+ {
+ /* In this instance the co-routine could be placed directly
+ into the ready list as we are within a critical section.
+ Instead the same pending ready list mechanism is used as if
+ the event were caused from within an interrupt. */
+ if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+ {
+ xReturn = errQUEUE_YIELD;
+ }
+ }
+ }
+ else
+ {
+ xReturn = pdFAIL;
+ }
+ }
+ portENABLE_INTERRUPTS();
+
+ return xReturn;
+}
+#endif
+/*-----------------------------------------------------------*/
+
+
+
+#if configUSE_CO_ROUTINES == 1
+signed portBASE_TYPE xQueueCRSendFromISR( xQueueHandle pxQueue, const void *pvItemToQueue, signed portBASE_TYPE xCoRoutinePreviouslyWoken )
+{
+ /* Cannot block within an ISR so if there is no space on the queue then
+ exit without doing anything. */
+ if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
+ {
+ prvCopyDataToQueue( pxQueue, pvItemToQueue, queueSEND_TO_BACK );
+
+ /* We only want to wake one co-routine per ISR, so check that a
+ co-routine has not already been woken. */
+ if( !xCoRoutinePreviouslyWoken )
+ {
+ if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) )
+ {
+ if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+ {
+ return pdTRUE;
+ }
+ }
+ }
+ }
+
+ return xCoRoutinePreviouslyWoken;
+}
+#endif
+/*-----------------------------------------------------------*/
+
+#if configUSE_CO_ROUTINES == 1
+signed portBASE_TYPE xQueueCRReceiveFromISR( xQueueHandle pxQueue, void *pvBuffer, signed portBASE_TYPE *pxCoRoutineWoken )
+{
+signed portBASE_TYPE xReturn;
+
+ /* We cannot block from an ISR, so check there is data available. If
+ not then just leave without doing anything. */
+ if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )
+ {
+ /* Copy the data from the queue. */
+ pxQueue->pcReadFrom += pxQueue->uxItemSize;
+ if( pxQueue->pcReadFrom >= pxQueue->pcTail )
+ {
+ pxQueue->pcReadFrom = pxQueue->pcHead;
+ }
+ --( pxQueue->uxMessagesWaiting );
+ memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->pcReadFrom, ( unsigned ) pxQueue->uxItemSize );
+
+ if( !( *pxCoRoutineWoken ) )
+ {
+ if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) )
+ {
+ if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+ {
+ *pxCoRoutineWoken = pdTRUE;
+ }
+ }
+ }
+
+ xReturn = pdPASS;
+ }
+ else
+ {
+ xReturn = pdFAIL;
+ }
+
+ return xReturn;
+}
+#endif
+/*-----------------------------------------------------------*/
+
+//#if configQUEUE_REGISTRY_SIZE > 0
+
+ void vQueueAddToRegistry( xQueueHandle xQueue, signed char *pcQueueName )
+ {
+ unsigned portBASE_TYPE ux;
+
+ /* See if there is an empty space in the registry. A NULL name denotes
+ a free slot. */
+ for( ux = 0; ux < configQUEUE_REGISTRY_SIZE; ux++ )
+ {
+ if( xQueueRegistry[ ux ].pcQueueName == NULL )
+ {
+ /* Store the information on this queue. */
+ xQueueRegistry[ ux ].pcQueueName = pcQueueName;
+ xQueueRegistry[ ux ].xHandle = xQueue;
+ break;
+ }
+ }
+ }
+
+//#endif
+ /*-----------------------------------------------------------*/
+
+#if configQUEUE_REGISTRY_SIZE > 0
+
+ static void vQueueUnregisterQueue( xQueueHandle xQueue )
+ {
+ unsigned portBASE_TYPE ux;
+
+ /* See if the handle of the queue being unregistered in actually in the
+ registry. */
+ for( ux = 0; ux < configQUEUE_REGISTRY_SIZE; ux++ )
+ {
+ if( xQueueRegistry[ ux ].xHandle == xQueue )
+ {
+ /* Set the name to NULL to show that this slot if free again. */
+ xQueueRegistry[ ux ].pcQueueName = NULL;
+ break;
+ }
+ }
+
+ }
+
+#endif
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOS/Source/tasks.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOS/Source/tasks.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,2340 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers. That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "StackMacros.h"
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#if 0
+/*
+ * Macro to define the amount of stack available to the idle task.
+ */
+#define tskIDLE_STACK_SIZE configMINIMAL_STACK_SIZE
+#endif
+
+/*
+ * Task control block. A task control block (TCB) is allocated to each task,
+ * and stores the context of the task.
+ */
+typedef struct tskTaskControlBlock
+{
+ volatile portSTACK_TYPE *pxTopOfStack; /*< Points to the location of the last item placed on the tasks stack. THIS MUST BE THE FIRST MEMBER OF THE STRUCT. */
+
+ #if ( portUSING_MPU_WRAPPERS == 1 )
+ xMPU_SETTINGS xMPUSettings; /*< The MPU settings are defined as part of the port layer. THIS MUST BE THE SECOND MEMBER OF THE STRUCT. */
+ #endif
+
+ xListItem xGenericListItem; /*< List item used to place the TCB in ready and blocked queues. */
+ xListItem xEventListItem; /*< List item used to place the TCB in event lists. */
+ unsigned portBASE_TYPE uxPriority; /*< The priority of the task where 0 is the lowest priority. */
+ portSTACK_TYPE *pxStack; /*< Points to the start of the stack. */
+ signed char pcTaskName[ configMAX_TASK_NAME_LEN ];/*< Descriptive name given to the task when created. Facilitates debugging only. */
+
+ #if ( portSTACK_GROWTH > 0 )
+ portSTACK_TYPE *pxEndOfStack; /*< Used for stack overflow checking on architectures where the stack grows up from low memory. */
+ #endif
+
+ #if ( portCRITICAL_NESTING_IN_TCB == 1 )
+ unsigned portBASE_TYPE uxCriticalNesting;
+ #endif
+
+ #if ( configUSE_TRACE_FACILITY == 1 )
+ unsigned portBASE_TYPE uxTCBNumber; /*< This is used for tracing the scheduler and making debugging easier only. */
+ #endif
+
+ #if ( configUSE_MUTEXES == 1 )
+ unsigned portBASE_TYPE uxBasePriority; /*< The priority last assigned to the task - used by the priority inheritance mechanism. */
+ #endif
+
+ #if ( configUSE_APPLICATION_TASK_TAG == 1 )
+ pdTASK_HOOK_CODE pxTaskTag;
+ #endif
+
+ #if ( configGENERATE_RUN_TIME_STATS == 1 )
+ unsigned long ulRunTimeCounter; /*< Used for calculating how much CPU time each task is utilising. */
+ #endif
+
+} tskTCB;
+
+
+/*
+ * Some kernel aware debuggers require data to be viewed to be global, rather
+ * than file scope.
+ */
+#ifdef portREMOVE_STATIC_QUALIFIER
+ #define static
+#endif
+
+/*lint -e956 */
+PRIVILEGED_DATA tskTCB * volatile pxCurrentTCB = NULL;
+
+/* Lists for ready and blocked tasks. --------------------*/
+
+PRIVILEGED_DATA static xList pxReadyTasksLists[ configMAX_PRIORITIES ]; /*< Prioritised ready tasks. */
+PRIVILEGED_DATA static xList xDelayedTaskList1; /*< Delayed tasks. */
+PRIVILEGED_DATA static xList xDelayedTaskList2; /*< Delayed tasks (two lists are used - one for delays that have overflowed the current tick count. */
+PRIVILEGED_DATA static xList * volatile pxDelayedTaskList ; /*< Points to the delayed task list currently being used. */
+PRIVILEGED_DATA static xList * volatile pxOverflowDelayedTaskList; /*< Points to the delayed task list currently being used to hold tasks that have overflowed the current tick count. */
+PRIVILEGED_DATA static xList xPendingReadyList; /*< Tasks that have been readied while the scheduler was suspended. They will be moved to the ready queue when the scheduler is resumed. */
+
+#if ( INCLUDE_vTaskDelete == 1 )
+
+ PRIVILEGED_DATA static volatile xList xTasksWaitingTermination; /*< Tasks that have been deleted - but the their memory not yet freed. */
+ PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxTasksDeleted = ( unsigned portBASE_TYPE ) 0;
+
+#endif
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+ PRIVILEGED_DATA static xList xSuspendedTaskList; /*< Tasks that are currently suspended. */
+
+#endif
+
+/* File private variables. --------------------------------*/
+PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxCurrentNumberOfTasks = ( unsigned portBASE_TYPE ) 0;
+PRIVILEGED_DATA static volatile portTickType xTickCount = ( portTickType ) 0;
+PRIVILEGED_DATA static unsigned portBASE_TYPE uxTopUsedPriority = tskIDLE_PRIORITY;
+PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxTopReadyPriority = tskIDLE_PRIORITY;
+PRIVILEGED_DATA static volatile signed portBASE_TYPE xSchedulerRunning = pdFALSE;
+PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxSchedulerSuspended = ( unsigned portBASE_TYPE ) pdFALSE;
+PRIVILEGED_DATA static volatile unsigned portBASE_TYPE uxMissedTicks = ( unsigned portBASE_TYPE ) 0;
+PRIVILEGED_DATA static volatile portBASE_TYPE xMissedYield = ( portBASE_TYPE ) pdFALSE;
+PRIVILEGED_DATA static volatile portBASE_TYPE xNumOfOverflows = ( portBASE_TYPE ) 0;
+PRIVILEGED_DATA static unsigned portBASE_TYPE uxTaskNumber = ( unsigned portBASE_TYPE ) 0;
+
+#if ( configGENERATE_RUN_TIME_STATS == 1 )
+
+ PRIVILEGED_DATA static char pcStatsString[ 50 ] ;
+ PRIVILEGED_DATA static unsigned long ulTaskSwitchedInTime = 0UL; /*< Holds the value of a timer/counter the last time a task was switched in. */
+ static void prvGenerateRunTimeStatsForTasksInList( const signed char *pcWriteBuffer, xList *pxList, unsigned long ulTotalRunTime ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/* Debugging and trace facilities private variables and macros. ------------*/
+
+/*
+ * The value used to fill the stack of a task when the task is created. This
+ * is used purely for checking the high water mark for tasks.
+ */
+#define tskSTACK_FILL_BYTE ( 0xa5 )
+
+/*
+ * Macros used by vListTask to indicate which state a task is in.
+ */
+#define tskBLOCKED_CHAR ( ( signed char ) 'B' )
+#define tskREADY_CHAR ( ( signed char ) 'R' )
+#define tskDELETED_CHAR ( ( signed char ) 'D' )
+#define tskSUSPENDED_CHAR ( ( signed char ) 'S' )
+
+/*
+ * Macros and private variables used by the trace facility.
+ */
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ #define tskSIZE_OF_EACH_TRACE_LINE ( ( unsigned long ) ( sizeof( unsigned long ) + sizeof( unsigned long ) ) )
+ PRIVILEGED_DATA static volatile signed char * volatile pcTraceBuffer;
+ PRIVILEGED_DATA static signed char *pcTraceBufferStart;
+ PRIVILEGED_DATA static signed char *pcTraceBufferEnd;
+ PRIVILEGED_DATA static signed portBASE_TYPE xTracing = pdFALSE;
+ static unsigned portBASE_TYPE uxPreviousTask = 255;
+ PRIVILEGED_DATA static char pcStatusString[ 50 ];
+
+#endif
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Macro that writes a trace of scheduler activity to a buffer. This trace
+ * shows which task is running when and is very useful as a debugging tool.
+ * As this macro is called each context switch it is a good idea to undefine
+ * it if not using the facility.
+ */
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ #define vWriteTraceToBuffer() \
+ { \
+ if( xTracing ) \
+ { \
+ if( uxPreviousTask != pxCurrentTCB->uxTCBNumber ) \
+ { \
+ if( ( pcTraceBuffer + tskSIZE_OF_EACH_TRACE_LINE ) < pcTraceBufferEnd ) \
+ { \
+ uxPreviousTask = pxCurrentTCB->uxTCBNumber; \
+ *( unsigned long * ) pcTraceBuffer = ( unsigned long ) xTickCount; \
+ pcTraceBuffer += sizeof( unsigned long ); \
+ *( unsigned long * ) pcTraceBuffer = ( unsigned long ) uxPreviousTask; \
+ pcTraceBuffer += sizeof( unsigned long ); \
+ } \
+ else \
+ { \
+ xTracing = pdFALSE; \
+ } \
+ } \
+ } \
+ }
+
+#else
+
+ #define vWriteTraceToBuffer()
+
+#endif
+/*-----------------------------------------------------------*/
+
+/*
+ * Place the task represented by pxTCB into the appropriate ready queue for
+ * the task. It is inserted at the end of the list. One quirk of this is
+ * that if the task being inserted is at the same priority as the currently
+ * executing task, then it will only be rescheduled after the currently
+ * executing task has been rescheduled.
+ */
+#define prvAddTaskToReadyQueue( pxTCB ) \
+{ \
+ if( pxTCB->uxPriority > uxTopReadyPriority ) \
+ { \
+ uxTopReadyPriority = pxTCB->uxPriority; \
+ } \
+ vListInsertEnd( ( xList * ) &( pxReadyTasksLists[ pxTCB->uxPriority ] ), &( pxTCB->xGenericListItem ) ); \
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * Macro that looks at the list of tasks that are currently delayed to see if
+ * any require waking.
+ *
+ * Tasks are stored in the queue in the order of their wake time - meaning
+ * once one tasks has been found whose timer has not expired we need not look
+ * any further down the list.
+ */
+#define prvCheckDelayedTasks() \
+{ \
+register tskTCB *pxTCB; \
+ \
+ while( ( pxTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedTaskList ) ) != NULL ) \
+ { \
+ if( xTickCount < listGET_LIST_ITEM_VALUE( &( pxTCB->xGenericListItem ) ) ) \
+ { \
+ break; \
+ } \
+ vListRemove( &( pxTCB->xGenericListItem ) ); \
+ /* Is the task waiting on an event also? */ \
+ if( pxTCB->xEventListItem.pvContainer ) \
+ { \
+ vListRemove( &( pxTCB->xEventListItem ) ); \
+ } \
+ prvAddTaskToReadyQueue( pxTCB ); \
+ } \
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * Several functions take an xTaskHandle parameter that can optionally be NULL,
+ * where NULL is used to indicate that the handle of the currently executing
+ * task should be used in place of the parameter. This macro simply checks to
+ * see if the parameter is NULL and returns a pointer to the appropriate TCB.
+ */
+#define prvGetTCBFromHandle( pxHandle ) ( ( pxHandle == NULL ) ? ( tskTCB * ) pxCurrentTCB : ( tskTCB * ) pxHandle )
+
+
+/* File private functions. --------------------------------*/
+
+/*
+ * Utility to ready a TCB for a given task. Mainly just copies the parameters
+ * into the TCB structure.
+ */
+static void prvInitialiseTCBVariables( tskTCB *pxTCB, const signed char * const pcName, unsigned portBASE_TYPE uxPriority, const xMemoryRegion * const xRegions, unsigned short usStackDepth ) PRIVILEGED_FUNCTION;
+
+/*
+ * Utility to ready all the lists used by the scheduler. This is called
+ * automatically upon the creation of the first task.
+ */
+static void prvInitialiseTaskLists( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * The idle task, which as all tasks is implemented as a never ending loop.
+ * The idle task is automatically created and added to the ready lists upon
+ * creation of the first user task.
+ *
+ * The portTASK_FUNCTION_PROTO() macro is used to allow port/compiler specific
+ * language extensions. The equivalent prototype for this function is:
+ *
+ * void prvIdleTask( void *pvParameters );
+ *
+ */
+//static portTASK_FUNCTION_PROTO( prvIdleTask, pvParameters );
+#ifdef __cplusplus
+extern "C" {
+#endif
+ static portTASK_FUNCTION_PROTO( prvIdleTask, pvParameters );
+#ifdef __cplusplus
+}
+#endif
+/*
+ * Utility to free all memory allocated by the scheduler to hold a TCB,
+ * including the stack pointed to by the TCB.
+ *
+ * This does not free memory allocated by the task itself (i.e. memory
+ * allocated by calls to pvPortMalloc from within the tasks application code).
+ */
+#if ( ( INCLUDE_vTaskDelete == 1 ) || ( INCLUDE_vTaskCleanUpResources == 1 ) )
+
+ static void prvDeleteTCB( tskTCB *pxTCB ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Used only by the idle task. This checks to see if anything has been placed
+ * in the list of tasks waiting to be deleted. If so the task is cleaned up
+ * and its TCB deleted.
+ */
+static void prvCheckTasksWaitingTermination( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Allocates memory from the heap for a TCB and associated stack. Checks the
+ * allocation was successful.
+ */
+static tskTCB *prvAllocateTCBAndStack( unsigned short usStackDepth, portSTACK_TYPE *puxStackBuffer ) PRIVILEGED_FUNCTION;
+
+/*
+ * Called from vTaskList. vListTasks details all the tasks currently under
+ * control of the scheduler. The tasks may be in one of a number of lists.
+ * prvListTaskWithinSingleList accepts a list and details the tasks from
+ * within just that list.
+ *
+ * THIS FUNCTION IS INTENDED FOR DEBUGGING ONLY, AND SHOULD NOT BE CALLED FROM
+ * NORMAL APPLICATION CODE.
+ */
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ static void prvListTaskWithinSingleList( const signed char *pcWriteBuffer, xList *pxList, signed char cStatus ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * When a task is created, the stack of the task is filled with a known value.
+ * This function determines the 'high water mark' of the task stack by
+ * determining how much of the stack remains at the original preset value.
+ */
+#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )
+
+ static unsigned short usTaskCheckFreeStackSpace( const unsigned char * pucStackByte ) PRIVILEGED_FUNCTION;
+
+#endif
+
+
+/*lint +e956 */
+
+
+
+/*-----------------------------------------------------------
+ * TASK CREATION API documented in task.h
+ *----------------------------------------------------------*/
+
+signed portBASE_TYPE xTaskGenericCreate( pdTASK_CODE pxTaskCode, const signed char * const pcName, unsigned short usStackDepth, void *pvParameters, unsigned portBASE_TYPE uxPriority, xTaskHandle *pxCreatedTask, portSTACK_TYPE *puxStackBuffer, const xMemoryRegion * const xRegions )
+{
+signed portBASE_TYPE xReturn;
+tskTCB * pxNewTCB;
+
+ /* Allocate the memory required by the TCB and stack for the new task,
+ checking that the allocation was successful. */
+ pxNewTCB = prvAllocateTCBAndStack( usStackDepth, puxStackBuffer );
+
+ if( pxNewTCB != NULL )
+ {
+ portSTACK_TYPE *pxTopOfStack;
+
+ #if( portUSING_MPU_WRAPPERS == 1 )
+ /* Should the task be created in privileged mode? */
+ portBASE_TYPE xRunPrivileged;
+ if( ( uxPriority & portPRIVILEGE_BIT ) != 0x00 )
+ {
+ xRunPrivileged = pdTRUE;
+ }
+ else
+ {
+ xRunPrivileged = pdFALSE;
+ }
+ uxPriority &= ~portPRIVILEGE_BIT;
+ #endif /* portUSING_MPU_WRAPPERS == 1 */
+
+ /* Calculate the top of stack address. This depends on whether the
+ stack grows from high memory to low (as per the 80x86) or visa versa.
+ portSTACK_GROWTH is used to make the result positive or negative as
+ required by the port. */
+ #if( portSTACK_GROWTH < 0 )
+ {
+ pxTopOfStack = pxNewTCB->pxStack + ( usStackDepth - 1 );
+ pxTopOfStack = ( portSTACK_TYPE * ) ( ( ( unsigned long ) pxTopOfStack ) & ( ( unsigned long ) ~portBYTE_ALIGNMENT_MASK ) );
+ }
+ #else
+ {
+ pxTopOfStack = pxNewTCB->pxStack;
+
+ /* If we want to use stack checking on architectures that use
+ a positive stack growth direction then we also need to store the
+ other extreme of the stack space. */
+ pxNewTCB->pxEndOfStack = pxNewTCB->pxStack + ( usStackDepth - 1 );
+ }
+ #endif
+
+ /* Setup the newly allocated TCB with the initial state of the task. */
+ prvInitialiseTCBVariables( pxNewTCB, pcName, uxPriority, xRegions, usStackDepth );
+
+ /* Initialize the TCB stack to look as if the task was already running,
+ but had been interrupted by the scheduler. The return address is set
+ to the start of the task function. Once the stack has been initialised
+ the top of stack variable is updated. */
+ #if( portUSING_MPU_WRAPPERS == 1 )
+ {
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters, xRunPrivileged );
+ }
+ #else
+ {
+ pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters );
+ }
+ #endif
+
+ /* We are going to manipulate the task queues to add this task to a
+ ready list, so must make sure no interrupts occur. */
+ portENTER_CRITICAL();
+ {
+ uxCurrentNumberOfTasks++;
+ if( uxCurrentNumberOfTasks == ( unsigned portBASE_TYPE ) 1 )
+ {
+ /* As this is the first task it must also be the current task. */
+ pxCurrentTCB = pxNewTCB;
+
+ /* This is the first task to be created so do the preliminary
+ initialisation required. We will not recover if this call
+ fails, but we will report the failure. */
+ prvInitialiseTaskLists();
+ }
+ else
+ {
+ /* If the scheduler is not already running, make this task the
+ current task if it is the highest priority task to be created
+ so far. */
+ if( xSchedulerRunning == pdFALSE )
+ {
+ if( pxCurrentTCB->uxPriority <= uxPriority )
+ {
+ pxCurrentTCB = pxNewTCB;
+ }
+ }
+ }
+
+ /* Remember the top priority to make context switching faster. Use
+ the priority in pxNewTCB as this has been capped to a valid value. */
+ if( pxNewTCB->uxPriority > uxTopUsedPriority )
+ {
+ uxTopUsedPriority = pxNewTCB->uxPriority;
+ }
+
+ #if ( configUSE_TRACE_FACILITY == 1 )
+ {
+ /* Add a counter into the TCB for tracing only. */
+ pxNewTCB->uxTCBNumber = uxTaskNumber;
+ }
+ #endif
+ uxTaskNumber++;
+
+ prvAddTaskToReadyQueue( pxNewTCB );
+
+ xReturn = pdPASS;
+ traceTASK_CREATE( pxNewTCB );
+ }
+ portEXIT_CRITICAL();
+ }
+ else
+ {
+ xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;
+ traceTASK_CREATE_FAILED( pxNewTCB );
+ }
+
+ if( xReturn == pdPASS )
+ {
+ if( ( void * ) pxCreatedTask != NULL )
+ {
+ /* Pass the TCB out - in an anonymous way. The calling function/
+ task can use this as a handle to delete the task later if
+ required.*/
+ *pxCreatedTask = ( xTaskHandle ) pxNewTCB;
+ }
+
+ if( xSchedulerRunning != pdFALSE )
+ {
+ /* If the created task is of a higher priority than the current task
+ then it should run now. */
+ if( pxCurrentTCB->uxPriority < uxPriority )
+ {
+ portYIELD_WITHIN_API();
+ }
+ }
+ }
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelete == 1 )
+
+ void vTaskDelete( xTaskHandle pxTaskToDelete )
+ {
+ tskTCB *pxTCB;
+
+ portENTER_CRITICAL();
+ {
+ /* Ensure a yield is performed if the current task is being
+ deleted. */
+ if( pxTaskToDelete == pxCurrentTCB )
+ {
+ pxTaskToDelete = NULL;
+ }
+
+ /* If null is passed in here then we are deleting ourselves. */
+ pxTCB = prvGetTCBFromHandle( pxTaskToDelete );
+
+ /* Remove task from the ready list and place in the termination list.
+ This will stop the task from be scheduled. The idle task will check
+ the termination list and free up any memory allocated by the
+ scheduler for the TCB and stack. */
+ vListRemove( &( pxTCB->xGenericListItem ) );
+
+ /* Is the task waiting on an event also? */
+ if( pxTCB->xEventListItem.pvContainer )
+ {
+ vListRemove( &( pxTCB->xEventListItem ) );
+ }
+
+ vListInsertEnd( ( xList * ) &xTasksWaitingTermination, &( pxTCB->xGenericListItem ) );
+
+ /* Increment the ucTasksDeleted variable so the idle task knows
+ there is a task that has been deleted and that it should therefore
+ check the xTasksWaitingTermination list. */
+ ++uxTasksDeleted;
+
+ /* Increment the uxTaskNumberVariable also so kernel aware debuggers
+ can detect that the task lists need re-generating. */
+ uxTaskNumber++;
+
+ traceTASK_DELETE( pxTCB );
+ }
+ portEXIT_CRITICAL();
+
+ /* Force a reschedule if we have just deleted the current task. */
+ if( xSchedulerRunning != pdFALSE )
+ {
+ if( ( void * ) pxTaskToDelete == NULL )
+ {
+ portYIELD_WITHIN_API();
+ }
+ }
+ }
+
+#endif
+
+
+
+
+
+
+/*-----------------------------------------------------------
+ * TASK CONTROL API documented in task.h
+ *----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelayUntil == 1 )
+
+ void vTaskDelayUntil( portTickType * const pxPreviousWakeTime, portTickType xTimeIncrement )
+ {
+ portTickType xTimeToWake;
+ portBASE_TYPE xAlreadyYielded, xShouldDelay = pdFALSE;
+
+ vTaskSuspendAll();
+ {
+ /* Generate the tick time at which the task wants to wake. */
+ xTimeToWake = *pxPreviousWakeTime + xTimeIncrement;
+
+ if( xTickCount < *pxPreviousWakeTime )
+ {
+ /* The tick count has overflowed since this function was
+ lasted called. In this case the only time we should ever
+ actually delay is if the wake time has also overflowed,
+ and the wake time is greater than the tick time. When this
+ is the case it is as if neither time had overflowed. */
+ if( ( xTimeToWake < *pxPreviousWakeTime ) && ( xTimeToWake > xTickCount ) )
+ {
+ xShouldDelay = pdTRUE;
+ }
+ }
+ else
+ {
+ /* The tick time has not overflowed. In this case we will
+ delay if either the wake time has overflowed, and/or the
+ tick time is less than the wake time. */
+ if( ( xTimeToWake < *pxPreviousWakeTime ) || ( xTimeToWake > xTickCount ) )
+ {
+ xShouldDelay = pdTRUE;
+ }
+ }
+
+ /* Update the wake time ready for the next call. */
+ *pxPreviousWakeTime = xTimeToWake;
+
+ if( xShouldDelay )
+ {
+ traceTASK_DELAY_UNTIL();
+
+ /* We must remove ourselves from the ready list before adding
+ ourselves to the blocked list as the same list item is used for
+ both lists. */
+ vListRemove( ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );
+
+ /* The list item will be inserted in wake time order. */
+ listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xGenericListItem ), xTimeToWake );
+
+ if( xTimeToWake < xTickCount )
+ {
+ /* Wake time has overflowed. Place this item in the
+ overflow list. */
+ vListInsert( ( xList * ) pxOverflowDelayedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );
+ }
+ else
+ {
+ /* The wake time has not overflowed, so we can use the
+ current block list. */
+ vListInsert( ( xList * ) pxDelayedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );
+ }
+ }
+ }
+ xAlreadyYielded = xTaskResumeAll();
+
+ /* Force a reschedule if xTaskResumeAll has not already done so, we may
+ have put ourselves to sleep. */
+ if( !xAlreadyYielded )
+ {
+ portYIELD_WITHIN_API();
+ }
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelay == 1 )
+
+ void vTaskDelay( portTickType xTicksToDelay )
+ {
+ portTickType xTimeToWake;
+ signed portBASE_TYPE xAlreadyYielded = pdFALSE;
+
+ /* A delay time of zero just forces a reschedule. */
+ if( xTicksToDelay > ( portTickType ) 0 )
+ {
+ vTaskSuspendAll();
+ {
+ traceTASK_DELAY();
+
+ /* A task that is removed from the event list while the
+ scheduler is suspended will not get placed in the ready
+ list or removed from the blocked list until the scheduler
+ is resumed.
+
+ This task cannot be in an event list as it is the currently
+ executing task. */
+
+ /* Calculate the time to wake - this may overflow but this is
+ not a problem. */
+ xTimeToWake = xTickCount + xTicksToDelay;
+
+ /* We must remove ourselves from the ready list before adding
+ ourselves to the blocked list as the same list item is used for
+ both lists. */
+ vListRemove( ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );
+
+ /* The list item will be inserted in wake time order. */
+ listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xGenericListItem ), xTimeToWake );
+
+ if( xTimeToWake < xTickCount )
+ {
+ /* Wake time has overflowed. Place this item in the
+ overflow list. */
+ vListInsert( ( xList * ) pxOverflowDelayedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );
+ }
+ else
+ {
+ /* The wake time has not overflowed, so we can use the
+ current block list. */
+ vListInsert( ( xList * ) pxDelayedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );
+ }
+ }
+ xAlreadyYielded = xTaskResumeAll();
+ }
+
+ /* Force a reschedule if xTaskResumeAll has not already done so, we may
+ have put ourselves to sleep. */
+ if( !xAlreadyYielded )
+ {
+ portYIELD_WITHIN_API();
+ }
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_uxTaskPriorityGet == 1 )
+
+ unsigned portBASE_TYPE uxTaskPriorityGet( xTaskHandle pxTask )
+ {
+ tskTCB *pxTCB;
+ unsigned portBASE_TYPE uxReturn;
+
+ portENTER_CRITICAL();
+ {
+ /* If null is passed in here then we are changing the
+ priority of the calling function. */
+ pxTCB = prvGetTCBFromHandle( pxTask );
+ uxReturn = pxTCB->uxPriority;
+ }
+ portEXIT_CRITICAL();
+
+ return uxReturn;
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskPrioritySet == 1 )
+
+ void vTaskPrioritySet( xTaskHandle pxTask, unsigned portBASE_TYPE uxNewPriority )
+ {
+ tskTCB *pxTCB;
+ unsigned portBASE_TYPE uxCurrentPriority, xYieldRequired = pdFALSE;
+
+ /* Ensure the new priority is valid. */
+ if( uxNewPriority >= configMAX_PRIORITIES )
+ {
+ uxNewPriority = configMAX_PRIORITIES - 1;
+ }
+
+ portENTER_CRITICAL();
+ {
+ if( pxTask == pxCurrentTCB )
+ {
+ pxTask = NULL;
+ }
+
+ /* If null is passed in here then we are changing the
+ priority of the calling function. */
+ pxTCB = prvGetTCBFromHandle( pxTask );
+
+ traceTASK_PRIORITY_SET( pxTask, uxNewPriority );
+
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ uxCurrentPriority = pxTCB->uxBasePriority;
+ }
+ #else
+ {
+ uxCurrentPriority = pxTCB->uxPriority;
+ }
+ #endif
+
+ if( uxCurrentPriority != uxNewPriority )
+ {
+ /* The priority change may have readied a task of higher
+ priority than the calling task. */
+ if( uxNewPriority > uxCurrentPriority )
+ {
+ if( pxTask != NULL )
+ {
+ /* The priority of another task is being raised. If we
+ were raising the priority of the currently running task
+ there would be no need to switch as it must have already
+ been the highest priority task. */
+ xYieldRequired = pdTRUE;
+ }
+ }
+ else if( pxTask == NULL )
+ {
+ /* Setting our own priority down means there may now be another
+ task of higher priority that is ready to execute. */
+ xYieldRequired = pdTRUE;
+ }
+
+
+
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ /* Only change the priority being used if the task is not
+ currently using an inherited priority. */
+ if( pxTCB->uxBasePriority == pxTCB->uxPriority )
+ {
+ pxTCB->uxPriority = uxNewPriority;
+ }
+
+ /* The base priority gets set whatever. */
+ pxTCB->uxBasePriority = uxNewPriority;
+ }
+ #else
+ {
+ pxTCB->uxPriority = uxNewPriority;
+ }
+ #endif
+
+ listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( configMAX_PRIORITIES - ( portTickType ) uxNewPriority ) );
+
+ /* If the task is in the blocked or suspended list we need do
+ nothing more than change it's priority variable. However, if
+ the task is in a ready list it needs to be removed and placed
+ in the queue appropriate to its new priority. */
+ if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ uxCurrentPriority ] ), &( pxTCB->xGenericListItem ) ) )
+ {
+ /* The task is currently in its ready list - remove before adding
+ it to it's new ready list. As we are in a critical section we
+ can do this even if the scheduler is suspended. */
+ vListRemove( &( pxTCB->xGenericListItem ) );
+ prvAddTaskToReadyQueue( pxTCB );
+ }
+
+ if( xYieldRequired == pdTRUE )
+ {
+ portYIELD_WITHIN_API();
+ }
+ }
+ }
+ portEXIT_CRITICAL();
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+ void vTaskSuspend( xTaskHandle pxTaskToSuspend )
+ {
+ tskTCB *pxTCB;
+
+ portENTER_CRITICAL();
+ {
+ /* Ensure a yield is performed if the current task is being
+ suspended. */
+ if( pxTaskToSuspend == pxCurrentTCB )
+ {
+ pxTaskToSuspend = NULL;
+ }
+
+ /* If null is passed in here then we are suspending ourselves. */
+ pxTCB = prvGetTCBFromHandle( pxTaskToSuspend );
+
+ traceTASK_SUSPEND( pxTCB );
+
+ /* Remove task from the ready/delayed list and place in the suspended list. */
+ vListRemove( &( pxTCB->xGenericListItem ) );
+
+ /* Is the task waiting on an event also? */
+ if( pxTCB->xEventListItem.pvContainer )
+ {
+ vListRemove( &( pxTCB->xEventListItem ) );
+ }
+
+ vListInsertEnd( ( xList * ) &xSuspendedTaskList, &( pxTCB->xGenericListItem ) );
+ }
+ portEXIT_CRITICAL();
+
+ /* We may have just suspended the current task. */
+ if( ( void * ) pxTaskToSuspend == NULL )
+ {
+ portYIELD_WITHIN_API();
+ }
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+ signed portBASE_TYPE xTaskIsTaskSuspended( xTaskHandle xTask )
+ {
+ portBASE_TYPE xReturn = pdFALSE;
+ const tskTCB * const pxTCB = ( tskTCB * ) xTask;
+
+ /* Is the task we are attempting to resume actually in the
+ suspended list? */
+ if( listIS_CONTAINED_WITHIN( &xSuspendedTaskList, &( pxTCB->xGenericListItem ) ) != pdFALSE )
+ {
+ /* Has the task already been resumed from within an ISR? */
+ if( listIS_CONTAINED_WITHIN( &xPendingReadyList, &( pxTCB->xEventListItem ) ) != pdTRUE )
+ {
+ /* Is it in the suspended list because it is in the
+ Suspended state? It is possible to be in the suspended
+ list because it is blocked on a task with no timeout
+ specified. */
+ if( listIS_CONTAINED_WITHIN( NULL, &( pxTCB->xEventListItem ) ) == pdTRUE )
+ {
+ xReturn = pdTRUE;
+ }
+ }
+ }
+
+ return xReturn;
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+ void vTaskResume( xTaskHandle pxTaskToResume )
+ {
+ tskTCB *pxTCB;
+
+ /* Remove the task from whichever list it is currently in, and place
+ it in the ready list. */
+ pxTCB = ( tskTCB * ) pxTaskToResume;
+
+ /* The parameter cannot be NULL as it is impossible to resume the
+ currently executing task. */
+ if( ( pxTCB != NULL ) && ( pxTCB != pxCurrentTCB ) )
+ {
+ portENTER_CRITICAL();
+ {
+ if( xTaskIsTaskSuspended( pxTCB ) == pdTRUE )
+ {
+ traceTASK_RESUME( pxTCB );
+
+ /* As we are in a critical section we can access the ready
+ lists even if the scheduler is suspended. */
+ vListRemove( &( pxTCB->xGenericListItem ) );
+ prvAddTaskToReadyQueue( pxTCB );
+
+ /* We may have just resumed a higher priority task. */
+ if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+ {
+ /* This yield may not cause the task just resumed to run, but
+ will leave the lists in the correct state for the next yield. */
+ portYIELD_WITHIN_API();
+ }
+ }
+ }
+ portEXIT_CRITICAL();
+ }
+ }
+
+#endif
+
+/*-----------------------------------------------------------*/
+
+#if ( ( INCLUDE_xTaskResumeFromISR == 1 ) && ( INCLUDE_vTaskSuspend == 1 ) )
+
+ portBASE_TYPE xTaskResumeFromISR( xTaskHandle pxTaskToResume )
+ {
+ portBASE_TYPE xYieldRequired = pdFALSE;
+ tskTCB *pxTCB;
+
+ pxTCB = ( tskTCB * ) pxTaskToResume;
+
+ if( xTaskIsTaskSuspended( pxTCB ) == pdTRUE )
+ {
+ traceTASK_RESUME_FROM_ISR( pxTCB );
+
+ if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )
+ {
+ xYieldRequired = ( pxTCB->uxPriority >= pxCurrentTCB->uxPriority );
+ vListRemove( &( pxTCB->xGenericListItem ) );
+ prvAddTaskToReadyQueue( pxTCB );
+ }
+ else
+ {
+ /* We cannot access the delayed or ready lists, so will hold this
+ task pending until the scheduler is resumed, at which point a
+ yield will be performed if necessary. */
+ vListInsertEnd( ( xList * ) &( xPendingReadyList ), &( pxTCB->xEventListItem ) );
+ }
+ }
+
+ return xYieldRequired;
+ }
+
+#endif
+
+
+
+
+/*-----------------------------------------------------------
+ * PUBLIC SCHEDULER CONTROL documented in task.h
+ *----------------------------------------------------------*/
+
+// Modified by Kenji Arai / JH1PJL, October 30th,2010
+// move to port_asm.c
+#if 0
+void vTaskStartScheduler( void )
+{
+portBASE_TYPE xReturn;
+
+ /* Add the idle task at the lowest priority. */
+ xReturn = xTaskCreate( prvIdleTask, ( signed char * ) "IDLE", tskIDLE_STACK_SIZE, ( void * ) NULL, ( tskIDLE_PRIORITY | portPRIVILEGE_BIT ), ( xTaskHandle * ) NULL );
+
+ if( xReturn == pdPASS )
+ {
+ /* Interrupts are turned off here, to ensure a tick does not occur
+ before or during the call to xPortStartScheduler(). The stacks of
+ the created tasks contain a status word with interrupts switched on
+ so interrupts will automatically get re-enabled when the first task
+ starts to run.
+
+ STEPPING THROUGH HERE USING A DEBUGGER CAN CAUSE BIG PROBLEMS IF THE
+ DEBUGGER ALLOWS INTERRUPTS TO BE PROCESSED. */
+ portDISABLE_INTERRUPTS();
+
+ xSchedulerRunning = pdTRUE;
+ xTickCount = ( portTickType ) 0;
+
+ /* If configGENERATE_RUN_TIME_STATS is defined then the following
+ macro must be defined to configure the timer/counter used to generate
+ the run time counter time base. */
+ portCONFIGURE_TIMER_FOR_RUN_TIME_STATS();
+
+ /* Setting up the timer tick is hardware specific and thus in the
+ portable interface. */
+ if( xPortStartScheduler() )
+ {
+ /* Should not reach here as if the scheduler is running the
+ function will not return. */
+ }
+ else
+ {
+ /* Should only reach here if a task calls xTaskEndScheduler(). */
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+void vTaskEndScheduler( void )
+{
+ /* Stop the scheduler interrupts and call the portable scheduler end
+ routine so the original ISRs can be restored if necessary. The port
+ layer must ensure interrupts enable bit is left in the correct state. */
+ portDISABLE_INTERRUPTS();
+ xSchedulerRunning = pdFALSE;
+ vPortEndScheduler();
+}
+/*----------------------------------------------------------*/
+#endif
+
+void vTaskSuspendAll( void )
+{
+ /* A critical section is not required as the variable is of type
+ portBASE_TYPE. */
+ ++uxSchedulerSuspended;
+}
+/*----------------------------------------------------------*/
+
+signed portBASE_TYPE xTaskResumeAll( void )
+{
+register tskTCB *pxTCB;
+signed portBASE_TYPE xAlreadyYielded = pdFALSE;
+
+ /* It is possible that an ISR caused a task to be removed from an event
+ list while the scheduler was suspended. If this was the case then the
+ removed task will have been added to the xPendingReadyList. Once the
+ scheduler has been resumed it is safe to move all the pending ready
+ tasks from this list into their appropriate ready list. */
+ portENTER_CRITICAL();
+ {
+ --uxSchedulerSuspended;
+
+ if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )
+ {
+ if( uxCurrentNumberOfTasks > ( unsigned portBASE_TYPE ) 0 )
+ {
+ portBASE_TYPE xYieldRequired = pdFALSE;
+
+ /* Move any readied tasks from the pending list into the
+ appropriate ready list. */
+ while( ( pxTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( ( ( xList * ) &xPendingReadyList ) ) ) != NULL )
+ {
+ vListRemove( &( pxTCB->xEventListItem ) );
+ vListRemove( &( pxTCB->xGenericListItem ) );
+ prvAddTaskToReadyQueue( pxTCB );
+
+ /* If we have moved a task that has a priority higher than
+ the current task then we should yield. */
+ if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+ {
+ xYieldRequired = pdTRUE;
+ }
+ }
+
+ /* If any ticks occurred while the scheduler was suspended then
+ they should be processed now. This ensures the tick count does not
+ slip, and that any delayed tasks are resumed at the correct time. */
+ if( uxMissedTicks > ( unsigned portBASE_TYPE ) 0 )
+ {
+ while( uxMissedTicks > ( unsigned portBASE_TYPE ) 0 )
+ {
+ vTaskIncrementTick();
+ --uxMissedTicks;
+ }
+
+ /* As we have processed some ticks it is appropriate to yield
+ to ensure the highest priority task that is ready to run is
+ the task actually running. */
+ #if configUSE_PREEMPTION == 1
+ {
+ xYieldRequired = pdTRUE;
+ }
+ #endif
+ }
+
+ if( ( xYieldRequired == pdTRUE ) || ( xMissedYield == pdTRUE ) )
+ {
+ xAlreadyYielded = pdTRUE;
+ xMissedYield = pdFALSE;
+ portYIELD_WITHIN_API();
+ }
+ }
+ }
+ }
+ portEXIT_CRITICAL();
+
+ return xAlreadyYielded;
+}
+
+
+
+
+
+
+/*-----------------------------------------------------------
+ * PUBLIC TASK UTILITIES documented in task.h
+ *----------------------------------------------------------*/
+
+
+
+portTickType xTaskGetTickCount( void )
+{
+portTickType xTicks;
+
+ /* Critical section required if running on a 16 bit processor. */
+ portENTER_CRITICAL();
+ {
+ xTicks = xTickCount;
+ }
+ portEXIT_CRITICAL();
+
+ return xTicks;
+}
+/*-----------------------------------------------------------*/
+
+unsigned portBASE_TYPE uxTaskGetNumberOfTasks( void )
+{
+ /* A critical section is not required because the variables are of type
+ portBASE_TYPE. */
+ return uxCurrentNumberOfTasks;
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ void vTaskList( signed char *pcWriteBuffer )
+ {
+ unsigned portBASE_TYPE uxQueue;
+
+ /* This is a VERY costly function that should be used for debug only.
+ It leaves interrupts disabled for a LONG time. */
+
+ vTaskSuspendAll();
+ {
+ /* Run through all the lists that could potentially contain a TCB and
+ report the task name, state and stack high water mark. */
+
+ pcWriteBuffer[ 0 ] = ( signed char ) 0x00;
+ strcat( ( char * ) pcWriteBuffer, ( const char * ) "\r\n" );
+
+ uxQueue = uxTopUsedPriority + 1;
+
+ do
+ {
+ uxQueue--;
+
+ if( !listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxQueue ] ) ) )
+ {
+ prvListTaskWithinSingleList( pcWriteBuffer, ( xList * ) &( pxReadyTasksLists[ uxQueue ] ), tskREADY_CHAR );
+ }
+ }while( uxQueue > ( unsigned short ) tskIDLE_PRIORITY );
+
+ if( !listLIST_IS_EMPTY( pxDelayedTaskList ) )
+ {
+ prvListTaskWithinSingleList( pcWriteBuffer, ( xList * ) pxDelayedTaskList, tskBLOCKED_CHAR );
+ }
+
+ if( !listLIST_IS_EMPTY( pxOverflowDelayedTaskList ) )
+ {
+ prvListTaskWithinSingleList( pcWriteBuffer, ( xList * ) pxOverflowDelayedTaskList, tskBLOCKED_CHAR );
+ }
+
+ #if( INCLUDE_vTaskDelete == 1 )
+ {
+ if( !listLIST_IS_EMPTY( &xTasksWaitingTermination ) )
+ {
+ prvListTaskWithinSingleList( pcWriteBuffer, ( xList * ) &xTasksWaitingTermination, tskDELETED_CHAR );
+ }
+ }
+ #endif
+
+ #if ( INCLUDE_vTaskSuspend == 1 )
+ {
+ if( !listLIST_IS_EMPTY( &xSuspendedTaskList ) )
+ {
+ prvListTaskWithinSingleList( pcWriteBuffer, ( xList * ) &xSuspendedTaskList, tskSUSPENDED_CHAR );
+ }
+ }
+ #endif
+ }
+ xTaskResumeAll();
+ }
+
+#endif
+/*----------------------------------------------------------*/
+
+#if ( configGENERATE_RUN_TIME_STATS == 1 )
+
+ void vTaskGetRunTimeStats( signed char *pcWriteBuffer )
+ {
+ unsigned portBASE_TYPE uxQueue;
+ unsigned long ulTotalRunTime = portGET_RUN_TIME_COUNTER_VALUE();
+
+ /* This is a VERY costly function that should be used for debug only.
+ It leaves interrupts disabled for a LONG time. */
+
+ vTaskSuspendAll();
+ {
+ /* Run through all the lists that could potentially contain a TCB,
+ generating a table of run timer percentages in the provided
+ buffer. */
+
+ pcWriteBuffer[ 0 ] = ( signed char ) 0x00;
+ strcat( ( char * ) pcWriteBuffer, ( const char * ) "\r\n" );
+
+ uxQueue = uxTopUsedPriority + 1;
+
+ do
+ {
+ uxQueue--;
+
+ if( !listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxQueue ] ) ) )
+ {
+ prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, ( xList * ) &( pxReadyTasksLists[ uxQueue ] ), ulTotalRunTime );
+ }
+ }while( uxQueue > ( unsigned short ) tskIDLE_PRIORITY );
+
+ if( !listLIST_IS_EMPTY( pxDelayedTaskList ) )
+ {
+ prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, ( xList * ) pxDelayedTaskList, ulTotalRunTime );
+ }
+
+ if( !listLIST_IS_EMPTY( pxOverflowDelayedTaskList ) )
+ {
+ prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, ( xList * ) pxOverflowDelayedTaskList, ulTotalRunTime );
+ }
+
+ #if ( INCLUDE_vTaskDelete == 1 )
+ {
+ if( !listLIST_IS_EMPTY( &xTasksWaitingTermination ) )
+ {
+ prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, ( xList * ) &xTasksWaitingTermination, ulTotalRunTime );
+ }
+ }
+ #endif
+
+ #if ( INCLUDE_vTaskSuspend == 1 )
+ {
+ if( !listLIST_IS_EMPTY( &xSuspendedTaskList ) )
+ {
+ prvGenerateRunTimeStatsForTasksInList( pcWriteBuffer, ( xList * ) &xSuspendedTaskList, ulTotalRunTime );
+ }
+ }
+ #endif
+ }
+ xTaskResumeAll();
+ }
+
+#endif
+/*----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ void vTaskStartTrace( signed char * pcBuffer, unsigned long ulBufferSize )
+ {
+ portENTER_CRITICAL();
+ {
+ pcTraceBuffer = ( signed char * )pcBuffer;
+ pcTraceBufferStart = pcBuffer;
+ pcTraceBufferEnd = pcBuffer + ( ulBufferSize - tskSIZE_OF_EACH_TRACE_LINE );
+ xTracing = pdTRUE;
+ }
+ portEXIT_CRITICAL();
+ }
+
+#endif
+/*----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ unsigned long ulTaskEndTrace( void )
+ {
+ unsigned long ulBufferLength;
+
+ portENTER_CRITICAL();
+ xTracing = pdFALSE;
+ portEXIT_CRITICAL();
+
+ ulBufferLength = ( unsigned long ) ( pcTraceBuffer - pcTraceBufferStart );
+
+ return ulBufferLength;
+ }
+
+#endif
+
+
+
+/*-----------------------------------------------------------
+ * SCHEDULER INTERNALS AVAILABLE FOR PORTING PURPOSES
+ * documented in task.h
+ *----------------------------------------------------------*/
+
+
+void vTaskIncrementTick( void )
+{
+ /* Called by the portable layer each time a tick interrupt occurs.
+ Increments the tick then checks to see if the new tick value will cause any
+ tasks to be unblocked. */
+ if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )
+ {
+ ++xTickCount;
+ if( xTickCount == ( portTickType ) 0 )
+ {
+ xList *pxTemp;
+
+ /* Tick count has overflowed so we need to swap the delay lists.
+ If there are any items in pxDelayedTaskList here then there is
+ an error! */
+ pxTemp = pxDelayedTaskList;
+ pxDelayedTaskList = pxOverflowDelayedTaskList;
+ pxOverflowDelayedTaskList = pxTemp;
+ xNumOfOverflows++;
+ }
+
+ /* See if this tick has made a timeout expire. */
+ prvCheckDelayedTasks();
+ }
+ else
+ {
+ ++uxMissedTicks;
+
+ /* The tick hook gets called at regular intervals, even if the
+ scheduler is locked. */
+ #if ( configUSE_TICK_HOOK == 1 )
+ {
+ extern void vApplicationTickHook( void );
+
+ vApplicationTickHook();
+ }
+ #endif
+ }
+
+ #if ( configUSE_TICK_HOOK == 1 )
+ {
+ extern void vApplicationTickHook( void );
+
+ /* Guard against the tick hook being called when the missed tick
+ count is being unwound (when the scheduler is being unlocked. */
+ if( uxMissedTicks == 0 )
+ {
+ vApplicationTickHook();
+ }
+ }
+ #endif
+
+ traceTASK_INCREMENT_TICK( xTickCount );
+}
+/*-----------------------------------------------------------*/
+
+#if ( ( INCLUDE_vTaskCleanUpResources == 1 ) && ( INCLUDE_vTaskSuspend == 1 ) )
+
+ void vTaskCleanUpResources( void )
+ {
+ unsigned short usQueue;
+ volatile tskTCB *pxTCB;
+
+ usQueue = ( unsigned short ) uxTopUsedPriority + ( unsigned short ) 1;
+
+ /* Remove any TCB's from the ready queues. */
+ do
+ {
+ usQueue--;
+
+ while( !listLIST_IS_EMPTY( &( pxReadyTasksLists[ usQueue ] ) ) )
+ {
+ listGET_OWNER_OF_NEXT_ENTRY( pxTCB, &( pxReadyTasksLists[ usQueue ] ) );
+ vListRemove( ( xListItem * ) &( pxTCB->xGenericListItem ) );
+
+ prvDeleteTCB( ( tskTCB * ) pxTCB );
+ }
+ }while( usQueue > ( unsigned short ) tskIDLE_PRIORITY );
+
+ /* Remove any TCB's from the delayed queue. */
+ while( !listLIST_IS_EMPTY( &xDelayedTaskList1 ) )
+ {
+ listGET_OWNER_OF_NEXT_ENTRY( pxTCB, &xDelayedTaskList1 );
+ vListRemove( ( xListItem * ) &( pxTCB->xGenericListItem ) );
+
+ prvDeleteTCB( ( tskTCB * ) pxTCB );
+ }
+
+ /* Remove any TCB's from the overflow delayed queue. */
+ while( !listLIST_IS_EMPTY( &xDelayedTaskList2 ) )
+ {
+ listGET_OWNER_OF_NEXT_ENTRY( pxTCB, &xDelayedTaskList2 );
+ vListRemove( ( xListItem * ) &( pxTCB->xGenericListItem ) );
+
+ prvDeleteTCB( ( tskTCB * ) pxTCB );
+ }
+
+ while( !listLIST_IS_EMPTY( &xSuspendedTaskList ) )
+ {
+ listGET_OWNER_OF_NEXT_ENTRY( pxTCB, &xSuspendedTaskList );
+ vListRemove( ( xListItem * ) &( pxTCB->xGenericListItem ) );
+
+ prvDeleteTCB( ( tskTCB * ) pxTCB );
+ }
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+
+ void vTaskSetApplicationTaskTag( xTaskHandle xTask, pdTASK_HOOK_CODE pxTagValue )
+ {
+ tskTCB *xTCB;
+
+ /* If xTask is NULL then we are setting our own task hook. */
+ if( xTask == NULL )
+ {
+ xTCB = ( tskTCB * ) pxCurrentTCB;
+ }
+ else
+ {
+ xTCB = ( tskTCB * ) xTask;
+ }
+
+ /* Save the hook function in the TCB. A critical section is required as
+ the value can be accessed from an interrupt. */
+ portENTER_CRITICAL();
+ xTCB->pxTaskTag = pxTagValue;
+ portEXIT_CRITICAL();
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+
+ pdTASK_HOOK_CODE xTaskGetApplicationTaskTag( xTaskHandle xTask )
+ {
+ tskTCB *xTCB;
+ pdTASK_HOOK_CODE xReturn;
+
+ /* If xTask is NULL then we are setting our own task hook. */
+ if( xTask == NULL )
+ {
+ xTCB = ( tskTCB * ) pxCurrentTCB;
+ }
+ else
+ {
+ xTCB = ( tskTCB * ) xTask;
+ }
+
+ /* Save the hook function in the TCB. A critical section is required as
+ the value can be accessed from an interrupt. */
+ portENTER_CRITICAL();
+ xReturn = xTCB->pxTaskTag;
+ portEXIT_CRITICAL();
+
+ return xReturn;
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+
+ portBASE_TYPE xTaskCallApplicationTaskHook( xTaskHandle xTask, void *pvParameter )
+ {
+ tskTCB *xTCB;
+ portBASE_TYPE xReturn;
+
+ /* If xTask is NULL then we are calling our own task hook. */
+ if( xTask == NULL )
+ {
+ xTCB = ( tskTCB * ) pxCurrentTCB;
+ }
+ else
+ {
+ xTCB = ( tskTCB * ) xTask;
+ }
+
+ if( xTCB->pxTaskTag != NULL )
+ {
+ xReturn = xTCB->pxTaskTag( pvParameter );
+ }
+ else
+ {
+ xReturn = pdFAIL;
+ }
+
+ return xReturn;
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+void vTaskSwitchContext( void )
+{
+ if( uxSchedulerSuspended != ( unsigned portBASE_TYPE ) pdFALSE )
+ {
+ /* The scheduler is currently suspended - do not allow a context
+ switch. */
+ xMissedYield = pdTRUE;
+ return;
+ }
+
+ traceTASK_SWITCHED_OUT();
+
+ #if ( configGENERATE_RUN_TIME_STATS == 1 )
+ {
+ unsigned long ulTempCounter = portGET_RUN_TIME_COUNTER_VALUE();
+
+ /* Add the amount of time the task has been running to the accumulated
+ time so far. The time the task started running was stored in
+ ulTaskSwitchedInTime. Note that there is no overflow protection here
+ so count values are only valid until the timer overflows. Generally
+ this will be about 1 hour assuming a 1uS timer increment. */
+ pxCurrentTCB->ulRunTimeCounter += ( ulTempCounter - ulTaskSwitchedInTime );
+ ulTaskSwitchedInTime = ulTempCounter;
+ }
+ #endif
+
+ taskFIRST_CHECK_FOR_STACK_OVERFLOW();
+ taskSECOND_CHECK_FOR_STACK_OVERFLOW();
+
+ /* Find the highest priority queue that contains ready tasks. */
+ while( listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxTopReadyPriority ] ) ) )
+ {
+ --uxTopReadyPriority;
+ }
+
+ /* listGET_OWNER_OF_NEXT_ENTRY walks through the list, so the tasks of the
+ same priority get an equal share of the processor time. */
+ listGET_OWNER_OF_NEXT_ENTRY( pxCurrentTCB, &( pxReadyTasksLists[ uxTopReadyPriority ] ) );
+ #if 0
+ //#define listGET_OWNER_OF_NEXT_ENTRY( pxTCB, pxList )
+ {
+ xList * const pxConstList = &( pxReadyTasksLists[ uxTopReadyPriority ] );
+ /* Increment the index to the next item and return the item, ensuring */
+ /* we don't return the marker used at the end of the list. */
+ ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext;
+ if( ( pxConstList )->pxIndex == ( xListItem * ) &( ( pxConstList )->xListEnd ) )
+ {
+ ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext;
+ }
+ pxCurrentTCB = (tskTCB *) (( pxConstList )->pxIndex->pvOwner); // Error then added (tskTCB *)()
+ }
+ #endif
+
+ traceTASK_SWITCHED_IN();
+ vWriteTraceToBuffer();
+}
+/*-----------------------------------------------------------*/
+
+void vTaskPlaceOnEventList( const xList * const pxEventList, portTickType xTicksToWait )
+{
+portTickType xTimeToWake;
+
+ /* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED OR THE
+ SCHEDULER SUSPENDED. */
+
+ /* Place the event list item of the TCB in the appropriate event list.
+ This is placed in the list in priority order so the highest priority task
+ is the first to be woken by the event. */
+ vListInsert( ( xList * ) pxEventList, ( xListItem * ) &( pxCurrentTCB->xEventListItem ) );
+
+ /* We must remove ourselves from the ready list before adding ourselves
+ to the blocked list as the same list item is used for both lists. We have
+ exclusive access to the ready lists as the scheduler is locked. */
+ vListRemove( ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );
+
+
+ #if ( INCLUDE_vTaskSuspend == 1 )
+ {
+ if( xTicksToWait == portMAX_DELAY )
+ {
+ /* Add ourselves to the suspended task list instead of a delayed task
+ list to ensure we are not woken by a timing event. We will block
+ indefinitely. */
+ vListInsertEnd( ( xList * ) &xSuspendedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );
+ }
+ else
+ {
+ /* Calculate the time at which the task should be woken if the event does
+ not occur. This may overflow but this doesn't matter. */
+ xTimeToWake = xTickCount + xTicksToWait;
+
+ listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xGenericListItem ), xTimeToWake );
+
+ if( xTimeToWake < xTickCount )
+ {
+ /* Wake time has overflowed. Place this item in the overflow list. */
+ vListInsert( ( xList * ) pxOverflowDelayedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );
+ }
+ else
+ {
+ /* The wake time has not overflowed, so we can use the current block list. */
+ vListInsert( ( xList * ) pxDelayedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );
+ }
+ }
+ }
+ #else
+ {
+ /* Calculate the time at which the task should be woken if the event does
+ not occur. This may overflow but this doesn't matter. */
+ xTimeToWake = xTickCount + xTicksToWait;
+
+ listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xGenericListItem ), xTimeToWake );
+
+ if( xTimeToWake < xTickCount )
+ {
+ /* Wake time has overflowed. Place this item in the overflow list. */
+ vListInsert( ( xList * ) pxOverflowDelayedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );
+ }
+ else
+ {
+ /* The wake time has not overflowed, so we can use the current block list. */
+ vListInsert( ( xList * ) pxDelayedTaskList, ( xListItem * ) &( pxCurrentTCB->xGenericListItem ) );
+ }
+ }
+ #endif
+}
+/*-----------------------------------------------------------*/
+
+signed portBASE_TYPE xTaskRemoveFromEventList( const xList * const pxEventList )
+{
+tskTCB *pxUnblockedTCB;
+portBASE_TYPE xReturn;
+
+ /* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED OR THE
+ SCHEDULER SUSPENDED. It can also be called from within an ISR. */
+
+ /* The event list is sorted in priority order, so we can remove the
+ first in the list, remove the TCB from the delayed list, and add
+ it to the ready list.
+
+ If an event is for a queue that is locked then this function will never
+ get called - the lock count on the queue will get modified instead. This
+ means we can always expect exclusive access to the event list here. */
+ pxUnblockedTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( pxEventList );
+ vListRemove( &( pxUnblockedTCB->xEventListItem ) );
+
+ if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )
+ {
+ vListRemove( &( pxUnblockedTCB->xGenericListItem ) );
+ prvAddTaskToReadyQueue( pxUnblockedTCB );
+ }
+ else
+ {
+ /* We cannot access the delayed or ready lists, so will hold this
+ task pending until the scheduler is resumed. */
+ vListInsertEnd( ( xList * ) &( xPendingReadyList ), &( pxUnblockedTCB->xEventListItem ) );
+ }
+
+ if( pxUnblockedTCB->uxPriority >= pxCurrentTCB->uxPriority )
+ {
+ /* Return true if the task removed from the event list has
+ a higher priority than the calling task. This allows
+ the calling task to know if it should force a context
+ switch now. */
+ xReturn = pdTRUE;
+ }
+ else
+ {
+ xReturn = pdFALSE;
+ }
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vTaskSetTimeOutState( xTimeOutType * const pxTimeOut )
+{
+ pxTimeOut->xOverflowCount = xNumOfOverflows;
+ pxTimeOut->xTimeOnEntering = xTickCount;
+}
+/*-----------------------------------------------------------*/
+
+portBASE_TYPE xTaskCheckForTimeOut( xTimeOutType * const pxTimeOut, portTickType * const pxTicksToWait )
+{
+portBASE_TYPE xReturn;
+
+ portENTER_CRITICAL();
+ {
+ #if ( INCLUDE_vTaskSuspend == 1 )
+ /* If INCLUDE_vTaskSuspend is set to 1 and the block time specified is
+ the maximum block time then the task should block indefinitely, and
+ therefore never time out. */
+ if( *pxTicksToWait == portMAX_DELAY )
+ {
+ xReturn = pdFALSE;
+ }
+ else /* We are not blocking indefinitely, perform the checks below. */
+ #endif
+
+ if( ( xNumOfOverflows != pxTimeOut->xOverflowCount ) && ( ( portTickType ) xTickCount >= ( portTickType ) pxTimeOut->xTimeOnEntering ) )
+ {
+ /* The tick count is greater than the time at which vTaskSetTimeout()
+ was called, but has also overflowed since vTaskSetTimeOut() was called.
+ It must have wrapped all the way around and gone past us again. This
+ passed since vTaskSetTimeout() was called. */
+ xReturn = pdTRUE;
+ }
+ else if( ( ( portTickType ) ( ( portTickType ) xTickCount - ( portTickType ) pxTimeOut->xTimeOnEntering ) ) < ( portTickType ) *pxTicksToWait )
+ {
+ /* Not a genuine timeout. Adjust parameters for time remaining. */
+ *pxTicksToWait -= ( ( portTickType ) xTickCount - ( portTickType ) pxTimeOut->xTimeOnEntering );
+ vTaskSetTimeOutState( pxTimeOut );
+ xReturn = pdFALSE;
+ }
+ else
+ {
+ xReturn = pdTRUE;
+ }
+ }
+ portEXIT_CRITICAL();
+
+ return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vTaskMissedYield( void )
+{
+ xMissedYield = pdTRUE;
+}
+
+/*
+ * -----------------------------------------------------------
+ * The Idle task.
+ * ----------------------------------------------------------
+ *
+ * The portTASK_FUNCTION() macro is used to allow port/compiler specific
+ * language extensions. The equivalent prototype for this function is:
+ *
+ * void prvIdleTask( void *pvParameters );
+ *
+ */
+static portTASK_FUNCTION( prvIdleTask, pvParameters )
+{
+ /* Stop warnings. */
+ ( void ) pvParameters;
+
+ for( ;; )
+ {
+ /* See if any tasks have been deleted. */
+ prvCheckTasksWaitingTermination();
+
+ #if ( configUSE_PREEMPTION == 0 )
+ {
+ /* If we are not using preemption we keep forcing a task switch to
+ see if any other task has become available. If we are using
+ preemption we don't need to do this as any task becoming available
+ will automatically get the processor anyway. */
+ taskYIELD();
+ }
+ #endif
+
+ #if ( ( configUSE_PREEMPTION == 1 ) && ( configIDLE_SHOULD_YIELD == 1 ) )
+ {
+ /* When using preemption tasks of equal priority will be
+ timesliced. If a task that is sharing the idle priority is ready
+ to run then the idle task should yield before the end of the
+ timeslice.
+
+ A critical region is not required here as we are just reading from
+ the list, and an occasional incorrect value will not matter. If
+ the ready list at the idle priority contains more than one task
+ then a task other than the idle task is ready to execute. */
+ if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ tskIDLE_PRIORITY ] ) ) > ( unsigned portBASE_TYPE ) 1 )
+ {
+ taskYIELD();
+ }
+ }
+ #endif
+
+ #if ( configUSE_IDLE_HOOK == 1 )
+ {
+ extern void vApplicationIdleHook( void );
+
+ /* Call the user defined function from within the idle task. This
+ allows the application designer to add background functionality
+ without the overhead of a separate task.
+ NOTE: vApplicationIdleHook() MUST NOT, UNDER ANY CIRCUMSTANCES,
+ CALL A FUNCTION THAT MIGHT BLOCK. */
+ vApplicationIdleHook();
+ }
+ #endif
+ }
+} /*lint !e715 pvParameters is not accessed but all task functions require the same prototype. */
+
+
+
+
+
+
+
+/*-----------------------------------------------------------
+ * File private functions documented at the top of the file.
+ *----------------------------------------------------------*/
+
+
+
+static void prvInitialiseTCBVariables( tskTCB *pxTCB, const signed char * const pcName, unsigned portBASE_TYPE uxPriority, const xMemoryRegion * const xRegions, unsigned short usStackDepth )
+{
+ /* Store the function name in the TCB. */
+ #if configMAX_TASK_NAME_LEN > 1
+ {
+ /* Don't bring strncpy into the build unnecessarily. */
+ strncpy( ( char * ) pxTCB->pcTaskName, ( const char * ) pcName, ( unsigned short ) configMAX_TASK_NAME_LEN );
+ }
+ #endif
+ pxTCB->pcTaskName[ ( unsigned short ) configMAX_TASK_NAME_LEN - ( unsigned short ) 1 ] = '\0';
+
+ /* This is used as an array index so must ensure it's not too large. First
+ remove the privilege bit if one is present. */
+ if( uxPriority >= configMAX_PRIORITIES )
+ {
+ uxPriority = configMAX_PRIORITIES - 1;
+ }
+
+ pxTCB->uxPriority = uxPriority;
+ #if ( configUSE_MUTEXES == 1 )
+ {
+ pxTCB->uxBasePriority = uxPriority;
+ }
+ #endif
+
+ vListInitialiseItem( &( pxTCB->xGenericListItem ) );
+ vListInitialiseItem( &( pxTCB->xEventListItem ) );
+
+ /* Set the pxTCB as a link back from the xListItem. This is so we can get
+ back to the containing TCB from a generic item in a list. */
+ listSET_LIST_ITEM_OWNER( &( pxTCB->xGenericListItem ), pxTCB );
+
+ /* Event lists are always in priority order. */
+ listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), configMAX_PRIORITIES - ( portTickType ) uxPriority );
+ listSET_LIST_ITEM_OWNER( &( pxTCB->xEventListItem ), pxTCB );
+
+ #if ( portCRITICAL_NESTING_IN_TCB == 1 )
+ {
+ pxTCB->uxCriticalNesting = ( unsigned portBASE_TYPE ) 0;
+ }
+ #endif
+
+ #if ( configUSE_APPLICATION_TASK_TAG == 1 )
+ {
+ pxTCB->pxTaskTag = NULL;
+ }
+ #endif
+
+ #if ( configGENERATE_RUN_TIME_STATS == 1 )
+ {
+ pxTCB->ulRunTimeCounter = 0UL;
+ }
+ #endif
+
+ #if ( portUSING_MPU_WRAPPERS == 1 )
+ {
+ vPortStoreTaskMPUSettings( &( pxTCB->xMPUSettings ), xRegions, pxTCB->pxStack, usStackDepth );
+ }
+ #else
+ {
+ ( void ) xRegions;
+ ( void ) usStackDepth;
+ }
+ #endif
+}
+/*-----------------------------------------------------------*/
+
+#if ( portUSING_MPU_WRAPPERS == 1 )
+
+ void vTaskAllocateMPURegions( xTaskHandle xTaskToModify, const xMemoryRegion * const xRegions )
+ {
+ tskTCB *pxTCB;
+
+ if( xTaskToModify == pxCurrentTCB )
+ {
+ xTaskToModify = NULL;
+ }
+
+ /* If null is passed in here then we are deleting ourselves. */
+ pxTCB = prvGetTCBFromHandle( xTaskToModify );
+
+ vPortStoreTaskMPUSettings( &( pxTCB->xMPUSettings ), xRegions, NULL, 0 );
+ }
+ /*-----------------------------------------------------------*/
+#endif
+
+static void prvInitialiseTaskLists( void )
+{
+unsigned portBASE_TYPE uxPriority;
+
+ for( uxPriority = 0; uxPriority < configMAX_PRIORITIES; uxPriority++ )
+ {
+ vListInitialise( ( xList * ) &( pxReadyTasksLists[ uxPriority ] ) );
+ }
+
+ vListInitialise( ( xList * ) &xDelayedTaskList1 );
+ vListInitialise( ( xList * ) &xDelayedTaskList2 );
+ vListInitialise( ( xList * ) &xPendingReadyList );
+
+ #if ( INCLUDE_vTaskDelete == 1 )
+ {
+ vListInitialise( ( xList * ) &xTasksWaitingTermination );
+ }
+ #endif
+
+ #if ( INCLUDE_vTaskSuspend == 1 )
+ {
+ vListInitialise( ( xList * ) &xSuspendedTaskList );
+ }
+ #endif
+
+ /* Start with pxDelayedTaskList using list1 and the pxOverflowDelayedTaskList
+ using list2. */
+ pxDelayedTaskList = &xDelayedTaskList1;
+ pxOverflowDelayedTaskList = &xDelayedTaskList2;
+}
+/*-----------------------------------------------------------*/
+
+static void prvCheckTasksWaitingTermination( void )
+{
+ #if ( INCLUDE_vTaskDelete == 1 )
+ {
+ portBASE_TYPE xListIsEmpty;
+
+ /* ucTasksDeleted is used to prevent vTaskSuspendAll() being called
+ too often in the idle task. */
+ if( uxTasksDeleted > ( unsigned portBASE_TYPE ) 0 )
+ {
+ vTaskSuspendAll();
+ xListIsEmpty = listLIST_IS_EMPTY( &xTasksWaitingTermination );
+ xTaskResumeAll();
+
+ if( !xListIsEmpty )
+ {
+ tskTCB *pxTCB;
+
+ portENTER_CRITICAL();
+ {
+ pxTCB = ( tskTCB * ) listGET_OWNER_OF_HEAD_ENTRY( ( ( xList * ) &xTasksWaitingTermination ) );
+ vListRemove( &( pxTCB->xGenericListItem ) );
+ --uxCurrentNumberOfTasks;
+ --uxTasksDeleted;
+ }
+ portEXIT_CRITICAL();
+
+ prvDeleteTCB( pxTCB );
+ }
+ }
+ }
+ #endif
+}
+/*-----------------------------------------------------------*/
+
+static tskTCB *prvAllocateTCBAndStack( unsigned short usStackDepth, portSTACK_TYPE *puxStackBuffer )
+{
+tskTCB *pxNewTCB;
+
+ /* Allocate space for the TCB. Where the memory comes from depends on
+ the implementation of the port malloc function. */
+ pxNewTCB = ( tskTCB * ) pvPortMalloc( sizeof( tskTCB ) );
+
+ if( pxNewTCB != NULL )
+ {
+ /* Allocate space for the stack used by the task being created.
+ The base of the stack memory stored in the TCB so the task can
+ be deleted later if required. */
+ pxNewTCB->pxStack = ( portSTACK_TYPE * ) pvPortMallocAligned( ( ( ( size_t )usStackDepth ) * sizeof( portSTACK_TYPE ) ), puxStackBuffer );
+
+ if( pxNewTCB->pxStack == NULL )
+ {
+ /* Could not allocate the stack. Delete the allocated TCB. */
+ vPortFree( pxNewTCB );
+ pxNewTCB = NULL;
+ }
+ else
+ {
+ /* Just to help debugging. */
+ memset( pxNewTCB->pxStack, tskSTACK_FILL_BYTE, usStackDepth * sizeof( portSTACK_TYPE ) );
+ }
+ }
+
+ return pxNewTCB;
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+ static void prvListTaskWithinSingleList( const signed char *pcWriteBuffer, xList *pxList, signed char cStatus )
+ {
+ volatile tskTCB *pxNextTCB, *pxFirstTCB;
+ unsigned short usStackRemaining;
+
+ /* Write the details of all the TCB's in pxList into the buffer. */
+ listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList );
+ do
+ {
+ listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList );
+ #if ( portSTACK_GROWTH > 0 )
+ {
+ usStackRemaining = usTaskCheckFreeStackSpace( ( unsigned char * ) pxNextTCB->pxEndOfStack );
+ }
+ #else
+ {
+ usStackRemaining = usTaskCheckFreeStackSpace( ( unsigned char * ) pxNextTCB->pxStack );
+ }
+ #endif
+
+ sprintf( pcStatusString, ( char * ) "%s\t\t%c\t%u\t%u\t%u\r\n", pxNextTCB->pcTaskName, cStatus, ( unsigned int ) pxNextTCB->uxPriority, usStackRemaining, ( unsigned int ) pxNextTCB->uxTCBNumber );
+ strcat( ( char * ) pcWriteBuffer, ( char * ) pcStatusString );
+
+ } while( pxNextTCB != pxFirstTCB );
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( configGENERATE_RUN_TIME_STATS == 1 )
+
+ static void prvGenerateRunTimeStatsForTasksInList( const signed char *pcWriteBuffer, xList *pxList, unsigned long ulTotalRunTime )
+ {
+ volatile tskTCB *pxNextTCB, *pxFirstTCB;
+ unsigned long ulStatsAsPercentage;
+
+ /* Write the run time stats of all the TCB's in pxList into the buffer. */
+ listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList );
+ do
+ {
+ /* Get next TCB in from the list. */
+ listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList );
+
+ /* Divide by zero check. */
+ if( ulTotalRunTime > 0UL )
+ {
+ /* Has the task run at all? */
+ if( pxNextTCB->ulRunTimeCounter == 0 )
+ {
+ /* The task has used no CPU time at all. */
+ sprintf( pcStatsString, ( char * ) "%s\t\t0\t\t0%%\r\n", pxNextTCB->pcTaskName );
+ }
+ else
+ {
+ /* What percentage of the total run time as the task used?
+ This will always be rounded down to the nearest integer. */
+ ulStatsAsPercentage = ( 100UL * pxNextTCB->ulRunTimeCounter ) / ulTotalRunTime;
+
+ if( ulStatsAsPercentage > 0UL )
+ {
+ sprintf( pcStatsString, ( char * ) "%s\t\t%u\t\t%u%%\r\n", pxNextTCB->pcTaskName, ( unsigned int ) pxNextTCB->ulRunTimeCounter, ( unsigned int ) ulStatsAsPercentage );
+ }
+ else
+ {
+ /* If the percentage is zero here then the task has
+ consumed less than 1% of the total run time. */
+ sprintf( pcStatsString, ( char * ) "%s\t\t%u\t\t<1%%\r\n", pxNextTCB->pcTaskName, ( unsigned int ) pxNextTCB->ulRunTimeCounter );
+ }
+ }
+
+ strcat( ( char * ) pcWriteBuffer, ( char * ) pcStatsString );
+ }
+
+ } while( pxNextTCB != pxFirstTCB );
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )
+
+ static unsigned short usTaskCheckFreeStackSpace( const unsigned char * pucStackByte )
+ {
+ register unsigned short usCount = 0;
+
+ while( *pucStackByte == tskSTACK_FILL_BYTE )
+ {
+ pucStackByte -= portSTACK_GROWTH;
+ usCount++;
+ }
+
+ usCount /= sizeof( portSTACK_TYPE );
+
+ return usCount;
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_uxTaskGetStackHighWaterMark == 1 )
+
+ unsigned portBASE_TYPE uxTaskGetStackHighWaterMark( xTaskHandle xTask )
+ {
+ tskTCB *pxTCB;
+ unsigned char *pcEndOfStack;
+ unsigned portBASE_TYPE uxReturn;
+
+ pxTCB = prvGetTCBFromHandle( xTask );
+
+ #if portSTACK_GROWTH < 0
+ {
+ pcEndOfStack = ( unsigned char * ) pxTCB->pxStack;
+ }
+ #else
+ {
+ pcEndOfStack = ( unsigned char * ) pxTCB->pxEndOfStack;
+ }
+ #endif
+
+ uxReturn = ( unsigned portBASE_TYPE ) usTaskCheckFreeStackSpace( pcEndOfStack );
+
+ return uxReturn;
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( ( INCLUDE_vTaskDelete == 1 ) || ( INCLUDE_vTaskCleanUpResources == 1 ) )
+
+ static void prvDeleteTCB( tskTCB *pxTCB )
+ {
+ /* Free up the memory allocated by the scheduler for the task. It is up to
+ the task to free any memory allocated at the application level. */
+ vPortFreeAligned( pxTCB->pxStack );
+ vPortFree( pxTCB );
+ }
+
+#endif
+
+
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskGetCurrentTaskHandle == 1 )
+
+ xTaskHandle xTaskGetCurrentTaskHandle( void )
+ {
+ xTaskHandle xReturn;
+
+ /* A critical section is not required as this is not called from
+ an interrupt and the current TCB will always be the same for any
+ individual execution thread. */
+ xReturn = pxCurrentTCB;
+
+ return xReturn;
+ }
+
+#endif
+
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskGetSchedulerState == 1 )
+
+ portBASE_TYPE xTaskGetSchedulerState( void )
+ {
+ portBASE_TYPE xReturn;
+
+ if( xSchedulerRunning == pdFALSE )
+ {
+ xReturn = taskSCHEDULER_NOT_STARTED;
+ }
+ else
+ {
+ if( uxSchedulerSuspended == ( unsigned portBASE_TYPE ) pdFALSE )
+ {
+ xReturn = taskSCHEDULER_RUNNING;
+ }
+ else
+ {
+ xReturn = taskSCHEDULER_SUSPENDED;
+ }
+ }
+
+ return xReturn;
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_MUTEXES == 1 )
+
+ void vTaskPriorityInherit( xTaskHandle * const pxMutexHolder )
+ {
+ tskTCB * const pxTCB = ( tskTCB * ) pxMutexHolder;
+
+ if( pxTCB->uxPriority < pxCurrentTCB->uxPriority )
+ {
+ /* Adjust the mutex holder state to account for its new priority. */
+ listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), configMAX_PRIORITIES - ( portTickType ) pxCurrentTCB->uxPriority );
+
+ /* If the task being modified is in the ready state it will need to
+ be moved in to a new list. */
+ if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ pxTCB->uxPriority ] ), &( pxTCB->xGenericListItem ) ) )
+ {
+ vListRemove( &( pxTCB->xGenericListItem ) );
+
+ /* Inherit the priority before being moved into the new list. */
+ pxTCB->uxPriority = pxCurrentTCB->uxPriority;
+ prvAddTaskToReadyQueue( pxTCB );
+ }
+ else
+ {
+ /* Just inherit the priority. */
+ pxTCB->uxPriority = pxCurrentTCB->uxPriority;
+ }
+ }
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_MUTEXES == 1 )
+
+ void vTaskPriorityDisinherit( xTaskHandle * const pxMutexHolder )
+ {
+ tskTCB * const pxTCB = ( tskTCB * ) pxMutexHolder;
+
+ if( pxMutexHolder != NULL )
+ {
+ if( pxTCB->uxPriority != pxTCB->uxBasePriority )
+ {
+ /* We must be the running task to be able to give the mutex back.
+ Remove ourselves from the ready list we currently appear in. */
+ vListRemove( &( pxTCB->xGenericListItem ) );
+
+ /* Disinherit the priority before adding ourselves into the new
+ ready list. */
+ pxTCB->uxPriority = pxTCB->uxBasePriority;
+ listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), configMAX_PRIORITIES - ( portTickType ) pxTCB->uxPriority );
+ prvAddTaskToReadyQueue( pxTCB );
+ }
+ }
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( portCRITICAL_NESTING_IN_TCB == 1 )
+
+ void vTaskEnterCritical( void )
+ {
+ portDISABLE_INTERRUPTS();
+
+ if( xSchedulerRunning != pdFALSE )
+ {
+ pxCurrentTCB->uxCriticalNesting++;
+ }
+ }
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( portCRITICAL_NESTING_IN_TCB == 1 )
+
+void vTaskExitCritical( void )
+{
+ if( xSchedulerRunning != pdFALSE )
+ {
+ if( pxCurrentTCB->uxCriticalNesting > 0 )
+ {
+ pxCurrentTCB->uxCriticalNesting--;
+
+ if( pxCurrentTCB->uxCriticalNesting == 0 )
+ {
+ portENABLE_INTERRUPTS();
+ }
+ }
+ }
+}
+
+#endif
+/*-----------------------------------------------------------*/
+
+
+
+
diff -r 000000000000 -r d4960fcea8ff FreeRTOSConfig.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/FreeRTOSConfig.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,215 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/*
+ * Modified for mbed & Xpresso NXP LPC1768 board
+ * By Kenji Arai / JH1PJL on March 9th,2010
+ * August 1st,2010
+ */
+
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+#include "LPC17xx.h"
+
+#define portREMOVE_STATIC_QUALIFIER
+
+// Modified by Kenji Arai / JH1PJL, August 28th,2010
+/*-----------------------------------------------------------
+ * Board Selection
+ *-----------------------------------------------------------*/
+#define USE_XPRESSO 0
+#define USE_MBED 1
+
+// Modified by Kenji Arai / JH1PJL, September 10th,2010
+/*-----------------------------------------------------------
+ * ADC mode selection
+ *-----------------------------------------------------------*/
+#define CH_GSEN_ONLY 1
+
+// Modified by Kenji Arai / JH1PJL, August 22nd,2010
+/*-----------------------------------------------------------
+ * AHB Memory usage
+ *-----------------------------------------------------------*/
+#define USE_AHB_RAM 1
+
+// Modified by Kenji Arai / JH1PJL, September 18th,2010
+/*-----------------------------------------------------------
+ * Monitor interface
+ *-----------------------------------------------------------*/
+#define MON_VIA_USB 0
+#define MON_VIA_UART 1
+
+/*-----------------------------------------------------------
+ * Application specific definitions.
+ *
+ * These definitions should be adjusted for your particular hardware and
+ * application requirements.
+ *
+ * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE
+ * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE.
+ *----------------------------------------------------------*/
+
+#define configUSE_PREEMPTION 1
+#define configUSE_IDLE_HOOK 0
+#define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 5 )
+#define configUSE_TICK_HOOK 1
+// Modified by Kenji Arai / JH1PJL, May 2nd,2010
+#define configCPU_CLOCK_HZ ( ( unsigned long ) 99000000 )
+//#define configCPU_CLOCK_HZ ( ( unsigned long ) 100000000 )
+#define configTICK_RATE_HZ ( ( portTickType ) 1000 )
+#define configMINIMAL_STACK_SIZE ( ( unsigned short ) 64 )
+// Modified by Kenji Arai / JH1PJL, August 13th,2010
+#define configMIN_STACK_SIZE ( ( unsigned short ) 80 )
+#define configMID_STACK_SIZE ( ( unsigned short ) 120 )
+#define configMAX_STACK_SIZE ( ( unsigned short ) 180 )
+
+// Modified by Kenji Arai / JH1PJL, May 8th,2010
+//#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 17 * 1024 ) )
+// back to original August 18th, 2010
+//#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 19 * 1024 ) )
+// more bigger August 18th, 2010
+#define configTOTAL_HEAP_SIZE ( ( size_t ) ( 22 * 1024 ) )
+#define configMAX_TASK_NAME_LEN ( 12 )
+#define configUSE_TRACE_FACILITY 1
+#define configUSE_16_BIT_TICKS 0
+#define configIDLE_SHOULD_YIELD 0
+#define configUSE_CO_ROUTINES 0
+#define configUSE_MUTEXES 1
+
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
+
+#define configUSE_COUNTING_SEMAPHORES 0
+#define configUSE_ALTERNATIVE_API 0
+#define configCHECK_FOR_STACK_OVERFLOW 2
+#define configUSE_RECURSIVE_MUTEXES 1
+#define configQUEUE_REGISTRY_SIZE 10
+#define configGENERATE_RUN_TIME_STATS 1
+
+/* Set the following definitions to 1 to include the API function, or zero
+to exclude the API function. */
+
+#define INCLUDE_vTaskPrioritySet 1
+#define INCLUDE_uxTaskPriorityGet 1
+#define INCLUDE_vTaskDelete 1
+#define INCLUDE_vTaskCleanUpResources 0
+#define INCLUDE_vTaskSuspend 1
+#define INCLUDE_vTaskDelayUntil 1
+#define INCLUDE_vTaskDelay 1
+#define INCLUDE_uxTaskGetStackHighWaterMark 1
+
+/*-----------------------------------------------------------
+ * Ethernet configuration.
+ *-----------------------------------------------------------*/
+
+/* MAC address configuration. */
+#define configMAC_ADDR0 0x00
+#define configMAC_ADDR1 0x12
+#define configMAC_ADDR2 0x13
+#define configMAC_ADDR3 0x10
+#define configMAC_ADDR4 0x15
+#define configMAC_ADDR5 0x11
+
+/* IP address configuration. */
+#define configIP_ADDR0 192
+#define configIP_ADDR1 168
+// Modified by Kenji Arai / JH1PJL, March 9th,2010
+//#define configIP_ADDR2 0
+#define configIP_ADDR2 1
+//#define configIP_ADDR3 201
+#define configIP_ADDR3 22
+
+/* Netmask configuration. */
+#define configNET_MASK0 255
+#define configNET_MASK1 255
+#define configNET_MASK2 255
+#define configNET_MASK3 0
+
+/* Use the system definition, if there is one */
+#ifdef __NVIC_PRIO_BITS
+ #define configPRIO_BITS __NVIC_PRIO_BITS
+#else
+ #define configPRIO_BITS 5 /* 32 priority levels */
+#endif
+
+/* The lowest priority. */
+#define configKERNEL_INTERRUPT_PRIORITY ( 31 << (8 - configPRIO_BITS) )
+/* Priority 5, or 160 as only the top three bits are implemented. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( 5 << (8 - configPRIO_BITS) )
+
+/* Priorities passed to NVIC_SetPriority() do not require shifting as the
+function does the shifting itself. Note these priorities need to be equal to
+or lower than configMAX_SYSCALL_INTERRUPT_PRIORITY - therefore the numeric
+value needs to be equal to or greater than 5 (on the Cortex M3 the lower the
+numeric value the higher the interrupt priority). */
+#define configEMAC_INTERRUPT_PRIORITY 5
+#define configUSB_INTERRUPT_PRIORITY 6
+
+
+/*-----------------------------------------------------------
+ * Macros required to setup the timer for the run time status.
+ *-----------------------------------------------------------*/
+#ifdef __cplusplus
+extern "C" {
+#endif
+extern void vConfigureTimerForRunTimeStats( void );
+#ifdef __cplusplus
+}
+#endif
+//extern void vConfigureTimerForRunTimeStats( void );
+#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() vConfigureTimerForRunTimeStats()
+// Modified by K.Arai April 11th, 2010
+#define portGET_RUN_TIME_COUNTER_VALUE() LPC_TIM0->TC
+
+
+#endif /* FREERTOS_CONFIG_H */
diff -r 000000000000 -r d4960fcea8ff LPC17xx.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/LPC17xx.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,1103 @@
+/******************************************************************************
+ * @file: LPC17xx.h
+ * @purpose: CMSIS Cortex-M3 Core Peripheral Access Layer Header File for
+ * NXP LPC17xx Device Series
+ * @version: V1.04
+ * @date: 2. July 2009
+ *----------------------------------------------------------------------------
+ *
+ * Copyright (C) 2008 ARM Limited. All rights reserved.
+ *
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M3
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+#ifndef __LPC17xx_H__
+#define __LPC17xx_H__
+/////////////////////////////////////////////////////////////////////////////
+/* System Control Block (SCB) includes:
+ Flash Accelerator Module, Clocking and Power Control, External Interrupts,
+ Reset, System Control and Status
+*/
+/*
+ * Modified by following information
+ * http://www.onarm.com/download/download395.asp
+ *
+ * By Kenji Arai / JH1PJL on April 11th,2010
+ * April 11th,2010
+ */
+
+#define SCB_BASE_ADDR 0x400FC000
+#define PCONP_PCTIM0 0x00000002
+#define PCONP_PCTIM1 0x00000004
+#define PCONP_PCUART0 0x00000008
+#define PCONP_PCUART1 0x00000010
+#define PCONP_PCPWM1 0x00000040
+#define PCONP_PCI2C0 0x00000080
+#define PCONP_PCSPI 0x00000100
+#define PCONP_PCRTC 0x00000200
+#define PCONP_PCSSP1 0x00000400
+#define PCONP_PCAD 0x00001000
+#define PCONP_PCCAN1 0x00002000
+#define PCONP_PCCAN2 0x00004000
+#define PCONP_PCGPIO 0x00008000
+#define PCONP_PCRIT 0x00010000
+#define PCONP_PCMCPWM 0x00020000
+#define PCONP_PCQEI 0x00040000
+#define PCONP_PCI2C1 0x00080000
+#define PCONP_PCSSP0 0x00200000
+#define PCONP_PCTIM2 0x00400000
+#define PCONP_PCTIM3 0x00800000
+#define PCONP_PCUART2 0x01000000
+#define PCONP_PCUART3 0x02000000
+#define PCONP_PCI2C2 0x04000000
+#define PCONP_PCI2S 0x08000000
+#define PCONP_PCGPDMA 0x20000000
+#define PCONP_PCENET 0x40000000
+#define PCONP_PCUSB 0x80000000
+
+#define PLLCON_PLLE 0x00000001
+#define PLLCON_PLLC 0x00000002
+#define PLLCON_MASK 0x00000003
+
+#define PLLCFG_MUL1 0x00000000
+#define PLLCFG_MUL2 0x00000001
+#define PLLCFG_MUL3 0x00000002
+#define PLLCFG_MUL4 0x00000003
+#define PLLCFG_MUL5 0x00000004
+#define PLLCFG_MUL6 0x00000005
+#define PLLCFG_MUL7 0x00000006
+#define PLLCFG_MUL8 0x00000007
+#define PLLCFG_MUL9 0x00000008
+#define PLLCFG_MUL10 0x00000009
+#define PLLCFG_MUL11 0x0000000A
+#define PLLCFG_MUL12 0x0000000B
+#define PLLCFG_MUL13 0x0000000C
+#define PLLCFG_MUL14 0x0000000D
+#define PLLCFG_MUL15 0x0000000E
+#define PLLCFG_MUL16 0x0000000F
+#define PLLCFG_MUL17 0x00000010
+#define PLLCFG_MUL18 0x00000011
+#define PLLCFG_MUL19 0x00000012
+#define PLLCFG_MUL20 0x00000013
+#define PLLCFG_MUL21 0x00000014
+#define PLLCFG_MUL22 0x00000015
+#define PLLCFG_MUL23 0x00000016
+#define PLLCFG_MUL24 0x00000017
+#define PLLCFG_MUL25 0x00000018
+#define PLLCFG_MUL26 0x00000019
+#define PLLCFG_MUL27 0x0000001A
+#define PLLCFG_MUL28 0x0000001B
+#define PLLCFG_MUL29 0x0000001C
+#define PLLCFG_MUL30 0x0000001D
+#define PLLCFG_MUL31 0x0000001E
+#define PLLCFG_MUL32 0x0000001F
+#define PLLCFG_MUL33 0x00000020
+#define PLLCFG_MUL34 0x00000021
+#define PLLCFG_MUL35 0x00000022
+#define PLLCFG_MUL36 0x00000023
+
+#define PLLCFG_DIV1 0x00000000
+#define PLLCFG_DIV2 0x00010000
+#define PLLCFG_DIV3 0x00020000
+#define PLLCFG_DIV4 0x00030000
+#define PLLCFG_DIV5 0x00040000
+#define PLLCFG_DIV6 0x00050000
+#define PLLCFG_DIV7 0x00060000
+#define PLLCFG_DIV8 0x00070000
+#define PLLCFG_DIV9 0x00080000
+#define PLLCFG_DIV10 0x00090000
+#define PLLCFG_MASK 0x00FF7FFF
+
+#define PLLSTAT_MSEL_MASK 0x00007FFF
+#define PLLSTAT_NSEL_MASK 0x00FF0000
+
+#define PLLSTAT_PLLE (1 << 24)
+#define PLLSTAT_PLLC (1 << 25)
+#define PLLSTAT_PLOCK (1 << 26)
+
+#define PLLFEED_FEED1 0x000000AA
+#define PLLFEED_FEED2 0x00000055
+
+#define NVIC_IRQ_WDT 0u // IRQ0, exception number 16
+#define NVIC_IRQ_TIMER0 1u // IRQ1, exception number 17
+#define NVIC_IRQ_TIMER1 2u // IRQ2, exception number 18
+#define NVIC_IRQ_TIMER2 3u // IRQ3, exception number 19
+#define NVIC_IRQ_TIMER3 4u // IRQ4, exception number 20
+#define NVIC_IRQ_UART0 5u // IRQ5, exception number 21
+#define NVIC_IRQ_UART1 6u // IRQ6, exception number 22
+#define NVIC_IRQ_UART2 7u // IRQ7, exception number 23
+#define NVIC_IRQ_UART3 8u // IRQ8, exception number 24
+#define NVIC_IRQ_PWM1 9u // IRQ9, exception number 25
+#define NVIC_IRQ_I2C0 10u // IRQ10, exception number 26
+#define NVIC_IRQ_I2C1 11u // IRQ11, exception number 27
+#define NVIC_IRQ_I2C2 12u // IRQ12, exception number 28
+#define NVIC_IRQ_SPI 13u // IRQ13, exception number 29
+#define NVIC_IRQ_SSP0 14u // IRQ14, exception number 30
+#define NVIC_IRQ_SSP1 15u // IRQ15, exception number 31
+#define NVIC_IRQ_PLL0 16u // IRQ16, exception number 32
+#define NVIC_IRQ_RTC 17u // IRQ17, exception number 33
+#define NVIC_IRQ_EINT0 18u // IRQ18, exception number 34
+#define NVIC_IRQ_EINT1 19u // IRQ19, exception number 35
+#define NVIC_IRQ_EINT2 20u // IRQ20, exception number 36
+#define NVIC_IRQ_EINT3 21u // IRQ21, exception number 37
+#define NVIC_IRQ_ADC 22u // IRQ22, exception number 38
+#define NVIC_IRQ_BOD 23u // IRQ23, exception number 39
+#define NVIC_IRQ_USB 24u // IRQ24, exception number 40
+#define NVIC_IRQ_CAN 25u // IRQ25, exception number 41
+#define NVIC_IRQ_GPDMA 26u // IRQ26, exception number 42
+#define NVIC_IRQ_I2S 27u // IRQ27, exception number 43
+#define NVIC_IRQ_ETHERNET 28u // IRQ28, exception number 44
+#define NVIC_IRQ_RIT 29u // IRQ29, exception number 45
+#define NVIC_IRQ_MCPWM 30u // IRQ30, exception number 46
+#define NVIC_IRQ_QE 31u // IRQ31, exception number 47
+#define NVIC_IRQ_PLL1 32u // IRQ32, exception number 48
+#define NVIC_IRQ_USB_ACT 33u // IRQ33, exception number 49
+#define NVIC_IRQ_CAN_ACT 34u // IRQ34, exception number 50
+/////////////////////////////////////////////////////////////////////////////
+
+/*
+ * ==========================================================================
+ * ---------- Interrupt Number Definition -----------------------------------
+ * ==========================================================================
+ */
+
+typedef enum IRQn
+{
+/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+
+/****** LPC17xx Specific Interrupt Numbers *******************************************************/
+ WDT_IRQn = 0, /*!< Watchdog Timer Interrupt */
+ TIMER0_IRQn = 1, /*!< Timer0 Interrupt */
+ TIMER1_IRQn = 2, /*!< Timer1 Interrupt */
+ TIMER2_IRQn = 3, /*!< Timer2 Interrupt */
+ TIMER3_IRQn = 4, /*!< Timer3 Interrupt */
+ UART0_IRQn = 5, /*!< UART0 Interrupt */
+ UART1_IRQn = 6, /*!< UART1 Interrupt */
+ UART2_IRQn = 7, /*!< UART2 Interrupt */
+ UART3_IRQn = 8, /*!< UART3 Interrupt */
+ PWM1_IRQn = 9, /*!< PWM1 Interrupt */
+ I2C0_IRQn = 10, /*!< I2C0 Interrupt */
+ I2C1_IRQn = 11, /*!< I2C1 Interrupt */
+ I2C2_IRQn = 12, /*!< I2C2 Interrupt */
+ SPI_IRQn = 13, /*!< SPI Interrupt */
+ SSP0_IRQn = 14, /*!< SSP0 Interrupt */
+ SSP1_IRQn = 15, /*!< SSP1 Interrupt */
+ PLL0_IRQn = 16, /*!< PLL0 Lock (Main PLL) Interrupt */
+ RTC_IRQn = 17, /*!< Real Time Clock Interrupt */
+ EINT0_IRQn = 18, /*!< External Interrupt 0 Interrupt */
+ EINT1_IRQn = 19, /*!< External Interrupt 1 Interrupt */
+ EINT2_IRQn = 20, /*!< External Interrupt 2 Interrupt */
+ EINT3_IRQn = 21, /*!< External Interrupt 3 Interrupt */
+ ADC_IRQn = 22, /*!< A/D Converter Interrupt */
+ BOD_IRQn = 23, /*!< Brown-Out Detect Interrupt */
+ USB_IRQn = 24, /*!< USB Interrupt */
+ CAN_IRQn = 25, /*!< CAN Interrupt */
+ DMA_IRQn = 26, /*!< General Purpose DMA Interrupt */
+ I2S_IRQn = 27, /*!< I2S Interrupt */
+ ENET_IRQn = 28, /*!< Ethernet Interrupt */
+ RIT_IRQn = 29, /*!< Repetitive Interrupt Timer Interrupt */
+ MCPWM_IRQn = 30, /*!< Motor Control PWM Interrupt */
+ QEI_IRQn = 31, /*!< Quadrature Encoder Interface Interrupt */
+ PLL1_IRQn = 32, /*!< PLL1 Lock (USB PLL) Interrupt */
+} IRQn_Type;
+
+
+/*
+ * ==========================================================================
+ * ----------- Processor and Core Peripheral Section ------------------------
+ * ==========================================================================
+ */
+
+/* Configuration of the Cortex-M3 Processor and Core Peripherals */
+#define __MPU_PRESENT 1 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 5 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+
+//#include <core_cm3.h> /* Cortex-M3 processor and core peripherals */
+#include "core_cm3.h" // by roger
+
+/******************************************************************************/
+/* Device Specific Peripheral registers structures */
+/******************************************************************************/
+
+#pragma anon_unions
+
+/*------------- System Control (SC) ------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t FLASHCFG; /* Flash Accelerator Module */
+ uint32_t RESERVED0[31];
+ __IO uint32_t PLL0CON; /* Clocking and Power Control */
+ __IO uint32_t PLL0CFG;
+ __I uint32_t PLL0STAT;
+ __O uint32_t PLL0FEED;
+ uint32_t RESERVED1[4];
+ __IO uint32_t PLL1CON;
+ __IO uint32_t PLL1CFG;
+ __I uint32_t PLL1STAT;
+ __O uint32_t PLL1FEED;
+ uint32_t RESERVED2[4];
+ __IO uint32_t PCON;
+ __IO uint32_t PCONP;
+ uint32_t RESERVED3[15];
+ __IO uint32_t CCLKCFG;
+ __IO uint32_t USBCLKCFG;
+ __IO uint32_t CLKSRCSEL;
+ uint32_t RESERVED4[12];
+ __IO uint32_t EXTINT; /* External Interrupts */
+ uint32_t RESERVED5;
+ __IO uint32_t EXTMODE;
+ __IO uint32_t EXTPOLAR;
+ uint32_t RESERVED6[12];
+ __IO uint32_t RSID; /* Reset */
+ uint32_t RESERVED7[7];
+ __IO uint32_t SCS; /* Syscon Miscellaneous Registers */
+ __IO uint32_t IRCTRIM; /* Clock Dividers */
+ __IO uint32_t PCLKSEL0;
+ __IO uint32_t PCLKSEL1;
+ uint32_t RESERVED8[4];
+ __IO uint32_t USBIntSt; /* USB Device/OTG Interrupt Register */
+ uint32_t RESERVED9;
+ __IO uint32_t CLKOUTCFG; /* Clock Output Configuration */
+ } LPC_SC_TypeDef;
+
+/*------------- Pin Connect Block (PINCON) -----------------------------------*/
+typedef struct
+{
+ __IO uint32_t PINSEL0;
+ __IO uint32_t PINSEL1;
+ __IO uint32_t PINSEL2;
+ __IO uint32_t PINSEL3;
+ __IO uint32_t PINSEL4;
+ __IO uint32_t PINSEL5;
+ __IO uint32_t PINSEL6;
+ __IO uint32_t PINSEL7;
+ __IO uint32_t PINSEL8;
+ __IO uint32_t PINSEL9;
+ __IO uint32_t PINSEL10;
+ uint32_t RESERVED0[5];
+ __IO uint32_t PINMODE0;
+ __IO uint32_t PINMODE1;
+ __IO uint32_t PINMODE2;
+ __IO uint32_t PINMODE3;
+ __IO uint32_t PINMODE4;
+ __IO uint32_t PINMODE5;
+ __IO uint32_t PINMODE6;
+ __IO uint32_t PINMODE7;
+ __IO uint32_t PINMODE8;
+ __IO uint32_t PINMODE9;
+ __IO uint32_t PINMODE_OD0;
+ __IO uint32_t PINMODE_OD1;
+ __IO uint32_t PINMODE_OD2;
+ __IO uint32_t PINMODE_OD3;
+ __IO uint32_t PINMODE_OD4;
+ __IO uint32_t I2CPADCFG;
+} LPC_PINCON_TypeDef;
+
+/*------------- General Purpose Input/Output (GPIO) --------------------------*/
+typedef struct
+{
+ __IO uint32_t FIODIR;
+ uint32_t RESERVED0[3];
+ __IO uint32_t FIOMASK;
+ __IO uint32_t FIOPIN;
+ __IO uint32_t FIOSET;
+ __O uint32_t FIOCLR;
+} LPC_GPIO_TypeDef;
+
+typedef struct
+{
+ __I uint32_t IntStatus;
+ __I uint32_t IO0IntStatR;
+ __I uint32_t IO0IntStatF;
+ __O uint32_t IO0IntClr;
+ __IO uint32_t IO0IntEnR;
+ __IO uint32_t IO0IntEnF;
+ uint32_t RESERVED0[3];
+ __I uint32_t IO2IntStatR;
+ __I uint32_t IO2IntStatF;
+ __O uint32_t IO2IntClr;
+ __IO uint32_t IO2IntEnR;
+ __IO uint32_t IO2IntEnF;
+} LPC_GPIOINT_TypeDef;
+
+/*------------- Timer (TIM) --------------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t IR;
+ __IO uint32_t TCR;
+ __IO uint32_t TC;
+ __IO uint32_t PR;
+ __IO uint32_t PC;
+ __IO uint32_t MCR;
+ __IO uint32_t MR0;
+ __IO uint32_t MR1;
+ __IO uint32_t MR2;
+ __IO uint32_t MR3;
+ __IO uint32_t CCR;
+ __I uint32_t CR0;
+ __I uint32_t CR1;
+ uint32_t RESERVED0[2];
+ __IO uint32_t EMR;
+ uint32_t RESERVED1[12];
+ __IO uint32_t CTCR;
+} LPC_TIM_TypeDef;
+
+/*------------- Pulse-Width Modulation (PWM) ---------------------------------*/
+typedef struct
+{
+ __IO uint32_t IR;
+ __IO uint32_t TCR;
+ __IO uint32_t TC;
+ __IO uint32_t PR;
+ __IO uint32_t PC;
+ __IO uint32_t MCR;
+ __IO uint32_t MR0;
+ __IO uint32_t MR1;
+ __IO uint32_t MR2;
+ __IO uint32_t MR3;
+ __IO uint32_t CCR;
+ __I uint32_t CR0;
+ __I uint32_t CR1;
+ __I uint32_t CR2;
+ __I uint32_t CR3;
+ uint32_t RESERVED0;
+ __IO uint32_t MR4;
+ __IO uint32_t MR5;
+ __IO uint32_t MR6;
+ __IO uint32_t PCR;
+ __IO uint32_t LER;
+ uint32_t RESERVED1[7];
+ __IO uint32_t CTCR;
+} LPC_PWM_TypeDef;
+
+/*------------- Universal Asynchronous Receiver Transmitter (UART) -----------*/
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[7];
+ __I uint8_t LSR;
+ uint8_t RESERVED2[7];
+ __IO uint8_t SCR;
+ uint8_t RESERVED3[3];
+ __IO uint32_t ACR;
+ __IO uint8_t ICR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t FDR;
+ uint8_t RESERVED5[7];
+ __IO uint8_t TER;
+ uint8_t RESERVED6[39];
+ __I uint8_t FIFOLVL;
+} LPC_UART_TypeDef;
+
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[7];
+ __I uint8_t LSR;
+ uint8_t RESERVED2[7];
+ __IO uint8_t SCR;
+ uint8_t RESERVED3[3];
+ __IO uint32_t ACR;
+ __IO uint8_t ICR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t FDR;
+ uint8_t RESERVED5[7];
+ __IO uint8_t TER;
+ uint8_t RESERVED6[39];
+ __I uint8_t FIFOLVL;
+ uint8_t RESERVED7[363];
+ __IO uint32_t DMAREQSEL;
+} LPC_UART0_TypeDef;
+
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[3];
+ __IO uint8_t MCR;
+ uint8_t RESERVED2[3];
+ __I uint8_t LSR;
+ uint8_t RESERVED3[3];
+ __I uint8_t MSR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t SCR;
+ uint8_t RESERVED5[3];
+ __IO uint32_t ACR;
+ uint32_t RESERVED6;
+ __IO uint32_t FDR;
+ uint32_t RESERVED7;
+ __IO uint8_t TER;
+ uint8_t RESERVED8[27];
+ __IO uint8_t RS485CTRL;
+ uint8_t RESERVED9[3];
+ __IO uint8_t ADRMATCH;
+ uint8_t RESERVED10[3];
+ __IO uint8_t RS485DLY;
+ uint8_t RESERVED11[3];
+ __I uint8_t FIFOLVL;
+} LPC_UART1_TypeDef;
+
+/*------------- Serial Peripheral Interface (SPI) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t SPCR;
+ __I uint32_t SPSR;
+ __IO uint32_t SPDR;
+ __IO uint32_t SPCCR;
+ uint32_t RESERVED0[3];
+ __IO uint32_t SPINT;
+} LPC_SPI_TypeDef;
+
+/*------------- Synchronous Serial Communication (SSP) -----------------------*/
+typedef struct
+{
+ __IO uint32_t CR0;
+ __IO uint32_t CR1;
+ __IO uint32_t DR;
+ __I uint32_t SR;
+ __IO uint32_t CPSR;
+ __IO uint32_t IMSC;
+ __IO uint32_t RIS;
+ __IO uint32_t MIS;
+ __IO uint32_t ICR;
+ __IO uint32_t DMACR;
+} LPC_SSP_TypeDef;
+
+/*------------- Inter-Integrated Circuit (I2C) -------------------------------*/
+typedef struct
+{
+ __IO uint32_t I2CONSET;
+ __I uint32_t I2STAT;
+ __IO uint32_t I2DAT;
+ __IO uint32_t I2ADR0;
+ __IO uint32_t I2SCLH;
+ __IO uint32_t I2SCLL;
+ __O uint32_t I2CONCLR;
+ __IO uint32_t MMCTRL;
+ __IO uint32_t I2ADR1;
+ __IO uint32_t I2ADR2;
+ __IO uint32_t I2ADR3;
+ __I uint32_t I2DATA_BUFFER;
+ __IO uint32_t I2MASK0;
+ __IO uint32_t I2MASK1;
+ __IO uint32_t I2MASK2;
+ __IO uint32_t I2MASK3;
+} LPC_I2C_TypeDef;
+
+/*------------- Inter IC Sound (I2S) -----------------------------------------*/
+typedef struct
+{
+ __IO uint32_t I2SDAO;
+ __IO uint32_t I2SDAI;
+ __O uint32_t I2STXFIFO;
+ __I uint32_t I2SRXFIFO;
+ __I uint32_t I2SSTATE;
+ __IO uint32_t I2SDMA1;
+ __IO uint32_t I2SDMA2;
+ __IO uint32_t I2SIRQ;
+ __IO uint32_t I2STXRATE;
+ __IO uint32_t I2SRXRATE;
+ __IO uint32_t I2STXBITRATE;
+ __IO uint32_t I2SRXBITRATE;
+ __IO uint32_t I2STXMODE;
+ __IO uint32_t I2SRXMODE;
+} LPC_I2S_TypeDef;
+
+/*------------- Repetitive Interrupt Timer (RIT) -----------------------------*/
+typedef struct
+{
+ __IO uint32_t RICOMPVAL;
+ __IO uint32_t RIMASK;
+ __IO uint8_t RICTRL;
+ uint8_t RESERVED0[3];
+ __IO uint32_t RICOUNTER;
+} LPC_RIT_TypeDef;
+
+/*------------- Real-Time Clock (RTC) ----------------------------------------*/
+typedef struct
+{
+ __IO uint8_t ILR;
+ uint8_t RESERVED0[7];
+ __IO uint8_t CCR;
+ uint8_t RESERVED1[3];
+ __IO uint8_t CIIR;
+ uint8_t RESERVED2[3];
+ __IO uint8_t AMR;
+ uint8_t RESERVED3[3];
+ __I uint32_t CTIME0;
+ __I uint32_t CTIME1;
+ __I uint32_t CTIME2;
+ __IO uint8_t SEC;
+ uint8_t RESERVED4[3];
+ __IO uint8_t MIN;
+ uint8_t RESERVED5[3];
+ __IO uint8_t HOUR;
+ uint8_t RESERVED6[3];
+ __IO uint8_t DOM;
+ uint8_t RESERVED7[3];
+ __IO uint8_t DOW;
+ uint8_t RESERVED8[3];
+ __IO uint16_t DOY;
+ uint16_t RESERVED9;
+ __IO uint8_t MONTH;
+ uint8_t RESERVED10[3];
+ __IO uint16_t YEAR;
+ uint16_t RESERVED11;
+ __IO uint32_t CALIBRATION;
+ __IO uint32_t GPREG0;
+ __IO uint32_t GPREG1;
+ __IO uint32_t GPREG2;
+ __IO uint32_t GPREG3;
+ __IO uint32_t GPREG4;
+ __IO uint8_t RTC_AUXEN;
+ uint8_t RESERVED12[3];
+ __IO uint8_t RTC_AUX;
+ uint8_t RESERVED13[3];
+ __IO uint8_t ALSEC;
+ uint8_t RESERVED14[3];
+ __IO uint8_t ALMIN;
+ uint8_t RESERVED15[3];
+ __IO uint8_t ALHOUR;
+ uint8_t RESERVED16[3];
+ __IO uint8_t ALDOM;
+ uint8_t RESERVED17[3];
+ __IO uint8_t ALDOW;
+ uint8_t RESERVED18[3];
+ __IO uint16_t ALDOY;
+ uint16_t RESERVED19;
+ __IO uint8_t ALMON;
+ uint8_t RESERVED20[3];
+ __IO uint16_t ALYEAR;
+ uint16_t RESERVED21;
+} LPC_RTC_TypeDef;
+
+/*------------- Watchdog Timer (WDT) -----------------------------------------*/
+typedef struct
+{
+ __IO uint8_t WDMOD;
+ uint8_t RESERVED0[3];
+ __IO uint32_t WDTC;
+ __O uint8_t WDFEED;
+ uint8_t RESERVED1[3];
+ __I uint32_t WDTV;
+ __IO uint32_t WDCLKSEL;
+} LPC_WDT_TypeDef;
+
+/*------------- Analog-to-Digital Converter (ADC) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t ADCR;
+ __IO uint32_t ADGDR;
+ uint32_t RESERVED0;
+ __IO uint32_t ADINTEN;
+ __I uint32_t ADDR0;
+ __I uint32_t ADDR1;
+ __I uint32_t ADDR2;
+ __I uint32_t ADDR3;
+ __I uint32_t ADDR4;
+ __I uint32_t ADDR5;
+ __I uint32_t ADDR6;
+ __I uint32_t ADDR7;
+ __I uint32_t ADSTAT;
+ __IO uint32_t ADTRM;
+} LPC_ADC_TypeDef;
+
+/*------------- Digital-to-Analog Converter (DAC) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t DACR;
+ __IO uint32_t DACCTRL;
+ __IO uint16_t DACCNTVAL;
+} LPC_DAC_TypeDef;
+
+/*------------- Motor Control Pulse-Width Modulation (MCPWM) -----------------*/
+typedef struct
+{
+ __I uint32_t MCCON;
+ __O uint32_t MCCON_SET;
+ __O uint32_t MCCON_CLR;
+ __I uint32_t MCCAPCON;
+ __O uint32_t MCCAPCON_SET;
+ __O uint32_t MCCAPCON_CLR;
+ __IO uint32_t MCTIM0;
+ __IO uint32_t MCTIM1;
+ __IO uint32_t MCTIM2;
+ __IO uint32_t MCPER0;
+ __IO uint32_t MCPER1;
+ __IO uint32_t MCPER2;
+ __IO uint32_t MCPW0;
+ __IO uint32_t MCPW1;
+ __IO uint32_t MCPW2;
+ __IO uint32_t MCDEADTIME;
+ __IO uint32_t MCCCP;
+ __IO uint32_t MCCR0;
+ __IO uint32_t MCCR1;
+ __IO uint32_t MCCR2;
+ __I uint32_t MCINTEN;
+ __O uint32_t MCINTEN_SET;
+ __O uint32_t MCINTEN_CLR;
+ __I uint32_t MCCNTCON;
+ __O uint32_t MCCNTCON_SET;
+ __O uint32_t MCCNTCON_CLR;
+ __I uint32_t MCINTFLAG;
+ __O uint32_t MCINTFLAG_SET;
+ __O uint32_t MCINTFLAG_CLR;
+ __O uint32_t MCCAP_CLR;
+} LPC_MCPWM_TypeDef;
+
+/*------------- Quadrature Encoder Interface (QEI) ---------------------------*/
+typedef struct
+{
+ __O uint32_t QEICON;
+ __I uint32_t QEISTAT;
+ __IO uint32_t QEICONF;
+ __I uint32_t QEIPOS;
+ __IO uint32_t QEIMAXPOS;
+ __IO uint32_t CMPOS0;
+ __IO uint32_t CMPOS1;
+ __IO uint32_t CMPOS2;
+ __I uint32_t INXCNT;
+ __IO uint32_t INXCMP;
+ __IO uint32_t QEILOAD;
+ __I uint32_t QEITIME;
+ __I uint32_t QEIVEL;
+ __I uint32_t QEICAP;
+ __IO uint32_t VELCOMP;
+ __IO uint32_t FILTER;
+ uint32_t RESERVED0[998];
+ __O uint32_t QEIIEC;
+ __O uint32_t QEIIES;
+ __I uint32_t QEIINTSTAT;
+ __I uint32_t QEIIE;
+ __O uint32_t QEICLR;
+ __O uint32_t QEISET;
+} LPC_QEI_TypeDef;
+
+/*------------- Controller Area Network (CAN) --------------------------------*/
+typedef struct
+{
+ __IO uint32_t mask[512]; /* ID Masks */
+} LPC_CANAF_RAM_TypeDef;
+
+typedef struct /* Acceptance Filter Registers */
+{
+ __IO uint32_t AFMR;
+ __IO uint32_t SFF_sa;
+ __IO uint32_t SFF_GRP_sa;
+ __IO uint32_t EFF_sa;
+ __IO uint32_t EFF_GRP_sa;
+ __IO uint32_t ENDofTable;
+ __I uint32_t LUTerrAd;
+ __I uint32_t LUTerr;
+ __IO uint32_t FCANIE;
+ __IO uint32_t FCANIC0;
+ __IO uint32_t FCANIC1;
+} LPC_CANAF_TypeDef;
+
+typedef struct /* Central Registers */
+{
+ __I uint32_t CANTxSR;
+ __I uint32_t CANRxSR;
+ __I uint32_t CANMSR;
+} LPC_CANCR_TypeDef;
+
+typedef struct /* Controller Registers */
+{
+ __IO uint32_t MOD;
+ __O uint32_t CMR;
+ __IO uint32_t GSR;
+ __I uint32_t ICR;
+ __IO uint32_t IER;
+ __IO uint32_t BTR;
+ __IO uint32_t EWL;
+ __I uint32_t SR;
+ __IO uint32_t RFS;
+ __IO uint32_t RID;
+ __IO uint32_t RDA;
+ __IO uint32_t RDB;
+ __IO uint32_t TFI1;
+ __IO uint32_t TID1;
+ __IO uint32_t TDA1;
+ __IO uint32_t TDB1;
+ __IO uint32_t TFI2;
+ __IO uint32_t TID2;
+ __IO uint32_t TDA2;
+ __IO uint32_t TDB2;
+ __IO uint32_t TFI3;
+ __IO uint32_t TID3;
+ __IO uint32_t TDA3;
+ __IO uint32_t TDB3;
+} LPC_CAN_TypeDef;
+
+/*------------- General Purpose Direct Memory Access (GPDMA) -----------------*/
+typedef struct /* Common Registers */
+{
+ __I uint32_t DMACIntStat;
+ __I uint32_t DMACIntTCStat;
+ __O uint32_t DMACIntTCClear;
+ __I uint32_t DMACIntErrStat;
+ __O uint32_t DMACIntErrClr;
+ __I uint32_t DMACRawIntTCStat;
+ __I uint32_t DMACRawIntErrStat;
+ __I uint32_t DMACEnbldChns;
+ __IO uint32_t DMACSoftBReq;
+ __IO uint32_t DMACSoftSReq;
+ __IO uint32_t DMACSoftLBReq;
+ __IO uint32_t DMACSoftLSReq;
+ __IO uint32_t DMACConfig;
+ __IO uint32_t DMACSync;
+} LPC_GPDMA_TypeDef;
+
+typedef struct /* Channel Registers */
+{
+ __IO uint32_t DMACCSrcAddr;
+ __IO uint32_t DMACCDestAddr;
+ __IO uint32_t DMACCLLI;
+ __IO uint32_t DMACCControl;
+ __IO uint32_t DMACCConfig;
+} LPC_GPDMACH_TypeDef;
+
+/*------------- Universal Serial Bus (USB) -----------------------------------*/
+typedef struct
+{
+ __I uint32_t HcRevision; /* USB Host Registers */
+ __IO uint32_t HcControl;
+ __IO uint32_t HcCommandStatus;
+ __IO uint32_t HcInterruptStatus;
+ __IO uint32_t HcInterruptEnable;
+ __IO uint32_t HcInterruptDisable;
+ __IO uint32_t HcHCCA;
+ __I uint32_t HcPeriodCurrentED;
+ __IO uint32_t HcControlHeadED;
+ __IO uint32_t HcControlCurrentED;
+ __IO uint32_t HcBulkHeadED;
+ __IO uint32_t HcBulkCurrentED;
+ __I uint32_t HcDoneHead;
+ __IO uint32_t HcFmInterval;
+ __I uint32_t HcFmRemaining;
+ __I uint32_t HcFmNumber;
+ __IO uint32_t HcPeriodicStart;
+ __IO uint32_t HcLSTreshold;
+ __IO uint32_t HcRhDescriptorA;
+ __IO uint32_t HcRhDescriptorB;
+ __IO uint32_t HcRhStatus;
+ __IO uint32_t HcRhPortStatus1;
+ __IO uint32_t HcRhPortStatus2;
+ uint32_t RESERVED0[40];
+ __I uint32_t Module_ID;
+
+ __I uint32_t OTGIntSt; /* USB On-The-Go Registers */
+ __IO uint32_t OTGIntEn;
+ __O uint32_t OTGIntSet;
+ __O uint32_t OTGIntClr;
+ __IO uint32_t OTGStCtrl;
+ __IO uint32_t OTGTmr;
+ uint32_t RESERVED1[58];
+
+ __I uint32_t USBDevIntSt; /* USB Device Interrupt Registers */
+ __IO uint32_t USBDevIntEn;
+ __O uint32_t USBDevIntClr;
+ __O uint32_t USBDevIntSet;
+
+ __O uint32_t USBCmdCode; /* USB Device SIE Command Registers */
+ __I uint32_t USBCmdData;
+
+ __I uint32_t USBRxData; /* USB Device Transfer Registers */
+ __O uint32_t USBTxData;
+ __I uint32_t USBRxPLen;
+ __O uint32_t USBTxPLen;
+ __IO uint32_t USBCtrl;
+ __O uint32_t USBDevIntPri;
+
+ __I uint32_t USBEpIntSt; /* USB Device Endpoint Interrupt Regs */
+ __IO uint32_t USBEpIntEn;
+ __O uint32_t USBEpIntClr;
+ __O uint32_t USBEpIntSet;
+ __O uint32_t USBEpIntPri;
+
+ __IO uint32_t USBReEp; /* USB Device Endpoint Realization Reg*/
+ __O uint32_t USBEpInd;
+ __IO uint32_t USBMaxPSize;
+
+ __I uint32_t USBDMARSt; /* USB Device DMA Registers */
+ __O uint32_t USBDMARClr;
+ __O uint32_t USBDMARSet;
+ uint32_t RESERVED2[9];
+ __IO uint32_t USBUDCAH;
+ __I uint32_t USBEpDMASt;
+ __O uint32_t USBEpDMAEn;
+ __O uint32_t USBEpDMADis;
+ __I uint32_t USBDMAIntSt;
+ __IO uint32_t USBDMAIntEn;
+ uint32_t RESERVED3[2];
+ __I uint32_t USBEoTIntSt;
+ __O uint32_t USBEoTIntClr;
+ __O uint32_t USBEoTIntSet;
+ __I uint32_t USBNDDRIntSt;
+ __O uint32_t USBNDDRIntClr;
+ __O uint32_t USBNDDRIntSet;
+ __I uint32_t USBSysErrIntSt;
+ __O uint32_t USBSysErrIntClr;
+ __O uint32_t USBSysErrIntSet;
+ uint32_t RESERVED4[15];
+
+ __I uint32_t I2C_RX; /* USB OTG I2C Registers */
+ __O uint32_t I2C_WO;
+ __I uint32_t I2C_STS;
+ __IO uint32_t I2C_CTL;
+ __IO uint32_t I2C_CLKHI;
+ __O uint32_t I2C_CLKLO;
+ uint32_t RESERVED5[823];
+
+ union {
+ __IO uint32_t USBClkCtrl; /* USB Clock Control Registers */
+ __IO uint32_t OTGClkCtrl;
+ };
+ union {
+ __I uint32_t USBClkSt;
+ __I uint32_t OTGClkSt;
+ };
+} LPC_USB_TypeDef;
+
+/*------------- Ethernet Media Access Controller (EMAC) ----------------------*/
+typedef struct
+{
+ __IO uint32_t MAC1; /* MAC Registers */
+ __IO uint32_t MAC2;
+ __IO uint32_t IPGT;
+ __IO uint32_t IPGR;
+ __IO uint32_t CLRT;
+ __IO uint32_t MAXF;
+ __IO uint32_t SUPP;
+ __IO uint32_t TEST;
+ __IO uint32_t MCFG;
+ __IO uint32_t MCMD;
+ __IO uint32_t MADR;
+ __O uint32_t MWTD;
+ __I uint32_t MRDD;
+ __I uint32_t MIND;
+ uint32_t RESERVED0[2];
+ __IO uint32_t SA0;
+ __IO uint32_t SA1;
+ __IO uint32_t SA2;
+ uint32_t RESERVED1[45];
+ __IO uint32_t Command; /* Control Registers */
+ __I uint32_t Status;
+ __IO uint32_t RxDescriptor;
+ __IO uint32_t RxStatus;
+ __IO uint32_t RxDescriptorNumber;
+ __I uint32_t RxProduceIndex;
+ __IO uint32_t RxConsumeIndex;
+ __IO uint32_t TxDescriptor;
+ __IO uint32_t TxStatus;
+ __IO uint32_t TxDescriptorNumber;
+ __IO uint32_t TxProduceIndex;
+ __I uint32_t TxConsumeIndex;
+ uint32_t RESERVED2[10];
+ __I uint32_t TSV0;
+ __I uint32_t TSV1;
+ __I uint32_t RSV;
+ uint32_t RESERVED3[3];
+ __IO uint32_t FlowControlCounter;
+ __I uint32_t FlowControlStatus;
+ uint32_t RESERVED4[34];
+ __IO uint32_t RxFilterCtrl; /* Rx Filter Registers */
+ __IO uint32_t RxFilterWoLStatus;
+ __IO uint32_t RxFilterWoLClear;
+ uint32_t RESERVED5;
+ __IO uint32_t HashFilterL;
+ __IO uint32_t HashFilterH;
+ uint32_t RESERVED6[882];
+ __I uint32_t IntStatus; /* Module Control Registers */
+ __IO uint32_t IntEnable;
+ __O uint32_t IntClear;
+ __O uint32_t IntSet;
+ uint32_t RESERVED7;
+ __IO uint32_t PowerDown;
+ uint32_t RESERVED8;
+ __IO uint32_t Module_ID;
+} LPC_EMAC_TypeDef;
+
+#pragma no_anon_unions
+
+
+/******************************************************************************/
+/* Peripheral memory map */
+/******************************************************************************/
+/* Base addresses */
+#define LPC_FLASH_BASE (0x00000000UL)
+#define LPC_RAM_BASE (0x10000000UL)
+#define LPC_GPIO_BASE (0x2009C000UL)
+#define LPC_APB0_BASE (0x40000000UL)
+#define LPC_APB1_BASE (0x40080000UL)
+#define LPC_AHB_BASE (0x50000000UL)
+#define LPC_CM3_BASE (0xE0000000UL)
+
+/* APB0 peripherals */
+#define LPC_WDT_BASE (LPC_APB0_BASE + 0x00000)
+#define LPC_TIM0_BASE (LPC_APB0_BASE + 0x04000)
+#define LPC_TIM1_BASE (LPC_APB0_BASE + 0x08000)
+#define LPC_UART0_BASE (LPC_APB0_BASE + 0x0C000)
+#define LPC_UART1_BASE (LPC_APB0_BASE + 0x10000)
+#define LPC_PWM1_BASE (LPC_APB0_BASE + 0x18000)
+#define LPC_I2C0_BASE (LPC_APB0_BASE + 0x1C000)
+#define LPC_SPI_BASE (LPC_APB0_BASE + 0x20000)
+#define LPC_RTC_BASE (LPC_APB0_BASE + 0x24000)
+#define LPC_GPIOINT_BASE (LPC_APB0_BASE + 0x28080)
+#define LPC_PINCON_BASE (LPC_APB0_BASE + 0x2C000)
+#define LPC_SSP1_BASE (LPC_APB0_BASE + 0x30000)
+#define LPC_ADC_BASE (LPC_APB0_BASE + 0x34000)
+#define LPC_CANAF_RAM_BASE (LPC_APB0_BASE + 0x38000)
+#define LPC_CANAF_BASE (LPC_APB0_BASE + 0x3C000)
+#define LPC_CANCR_BASE (LPC_APB0_BASE + 0x40000)
+#define LPC_CAN1_BASE (LPC_APB0_BASE + 0x44000)
+#define LPC_CAN2_BASE (LPC_APB0_BASE + 0x48000)
+#define LPC_I2C1_BASE (LPC_APB0_BASE + 0x5C000)
+
+/* APB1 peripherals */
+#define LPC_SSP0_BASE (LPC_APB1_BASE + 0x08000)
+#define LPC_DAC_BASE (LPC_APB1_BASE + 0x0C000)
+#define LPC_TIM2_BASE (LPC_APB1_BASE + 0x10000)
+#define LPC_TIM3_BASE (LPC_APB1_BASE + 0x14000)
+#define LPC_UART2_BASE (LPC_APB1_BASE + 0x18000)
+#define LPC_UART3_BASE (LPC_APB1_BASE + 0x1C000)
+#define LPC_I2C2_BASE (LPC_APB1_BASE + 0x20000)
+#define LPC_I2S_BASE (LPC_APB1_BASE + 0x28000)
+#define LPC_RIT_BASE (LPC_APB1_BASE + 0x30000)
+#define LPC_MCPWM_BASE (LPC_APB1_BASE + 0x38000)
+#define LPC_QEI_BASE (LPC_APB1_BASE + 0x3C000)
+#define LPC_SC_BASE (LPC_APB1_BASE + 0x7C000)
+
+/* AHB peripherals */
+#define LPC_EMAC_BASE (LPC_AHB_BASE + 0x00000)
+#define LPC_GPDMA_BASE (LPC_AHB_BASE + 0x04000)
+#define LPC_GPDMACH0_BASE (LPC_AHB_BASE + 0x04100)
+#define LPC_GPDMACH1_BASE (LPC_AHB_BASE + 0x04120)
+#define LPC_GPDMACH2_BASE (LPC_AHB_BASE + 0x04140)
+#define LPC_GPDMACH3_BASE (LPC_AHB_BASE + 0x04160)
+#define LPC_GPDMACH4_BASE (LPC_AHB_BASE + 0x04180)
+#define LPC_GPDMACH5_BASE (LPC_AHB_BASE + 0x041A0)
+#define LPC_GPDMACH6_BASE (LPC_AHB_BASE + 0x041C0)
+#define LPC_GPDMACH7_BASE (LPC_AHB_BASE + 0x041E0)
+#define LPC_USB_BASE (LPC_AHB_BASE + 0x0C000)
+
+/* GPIOs */
+#define LPC_GPIO0_BASE (LPC_GPIO_BASE + 0x00000)
+#define LPC_GPIO1_BASE (LPC_GPIO_BASE + 0x00020)
+#define LPC_GPIO2_BASE (LPC_GPIO_BASE + 0x00040)
+#define LPC_GPIO3_BASE (LPC_GPIO_BASE + 0x00060)
+#define LPC_GPIO4_BASE (LPC_GPIO_BASE + 0x00080)
+
+
+/******************************************************************************/
+/* Peripheral declaration */
+/******************************************************************************/
+#define LPC_SC ((LPC_SC_TypeDef *) LPC_SC_BASE )
+#define LPC_GPIO0 ((LPC_GPIO_TypeDef *) LPC_GPIO0_BASE )
+#define LPC_GPIO1 ((LPC_GPIO_TypeDef *) LPC_GPIO1_BASE )
+#define LPC_GPIO2 ((LPC_GPIO_TypeDef *) LPC_GPIO2_BASE )
+#define LPC_GPIO3 ((LPC_GPIO_TypeDef *) LPC_GPIO3_BASE )
+#define LPC_GPIO4 ((LPC_GPIO_TypeDef *) LPC_GPIO4_BASE )
+#define LPC_WDT ((LPC_WDT_TypeDef *) LPC_WDT_BASE )
+#define LPC_TIM0 ((LPC_TIM_TypeDef *) LPC_TIM0_BASE )
+#define LPC_TIM1 ((LPC_TIM_TypeDef *) LPC_TIM1_BASE )
+#define LPC_TIM2 ((LPC_TIM_TypeDef *) LPC_TIM2_BASE )
+#define LPC_TIM3 ((LPC_TIM_TypeDef *) LPC_TIM3_BASE )
+#define LPC_RIT ((LPC_RIT_TypeDef *) LPC_RIT_BASE )
+#define LPC_UART0 ((LPC_UART0_TypeDef *) LPC_UART0_BASE )
+#define LPC_UART1 ((LPC_UART1_TypeDef *) LPC_UART1_BASE )
+#define LPC_UART2 ((LPC_UART_TypeDef *) LPC_UART2_BASE )
+#define LPC_UART3 ((LPC_UART_TypeDef *) LPC_UART3_BASE )
+#define LPC_PWM1 ((LPC_PWM_TypeDef *) LPC_PWM1_BASE )
+#define LPC_I2C0 ((LPC_I2C_TypeDef *) LPC_I2C0_BASE )
+#define LPC_I2C1 ((LPC_I2C_TypeDef *) LPC_I2C1_BASE )
+#define LPC_I2C2 ((LPC_I2C_TypeDef *) LPC_I2C2_BASE )
+#define LPC_I2S ((LPC_I2S_TypeDef *) LPC_I2S_BASE )
+#define LPC_SPI ((LPC_SPI_TypeDef *) LPC_SPI_BASE )
+#define LPC_RTC ((LPC_RTC_TypeDef *) LPC_RTC_BASE )
+#define LPC_GPIOINT ((LPC_GPIOINT_TypeDef *) LPC_GPIOINT_BASE )
+#define LPC_PINCON ((LPC_PINCON_TypeDef *) LPC_PINCON_BASE )
+#define LPC_SSP0 ((LPC_SSP_TypeDef *) LPC_SSP0_BASE )
+#define LPC_SSP1 ((LPC_SSP_TypeDef *) LPC_SSP1_BASE )
+#define LPC_ADC ((LPC_ADC_TypeDef *) LPC_ADC_BASE )
+#define LPC_DAC ((LPC_DAC_TypeDef *) LPC_DAC_BASE )
+#define LPC_CANAF_RAM ((LPC_CANAF_RAM_TypeDef *) LPC_CANAF_RAM_BASE)
+#define LPC_CANAF ((LPC_CANAF_TypeDef *) LPC_CANAF_BASE )
+#define LPC_CANCR ((LPC_CANCR_TypeDef *) LPC_CANCR_BASE )
+#define LPC_CAN1 ((LPC_CAN_TypeDef *) LPC_CAN1_BASE )
+#define LPC_CAN2 ((LPC_CAN_TypeDef *) LPC_CAN2_BASE )
+#define LPC_MCPWM ((LPC_MCPWM_TypeDef *) LPC_MCPWM_BASE )
+#define LPC_QEI ((LPC_QEI_TypeDef *) LPC_QEI_BASE )
+#define LPC_EMAC ((LPC_EMAC_TypeDef *) LPC_EMAC_BASE )
+#define LPC_GPDMA ((LPC_GPDMA_TypeDef *) LPC_GPDMA_BASE )
+#define LPC_GPDMACH0 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH0_BASE )
+#define LPC_GPDMACH1 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH1_BASE )
+#define LPC_GPDMACH2 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH2_BASE )
+#define LPC_GPDMACH3 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH3_BASE )
+#define LPC_GPDMACH4 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH4_BASE )
+#define LPC_GPDMACH5 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH5_BASE )
+#define LPC_GPDMACH6 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH6_BASE )
+#define LPC_GPDMACH7 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH7_BASE )
+#define LPC_USB ((LPC_USB_TypeDef *) LPC_USB_BASE )
+
+#endif // __LPC17xx_H__
diff -r 000000000000 -r d4960fcea8ff ParTest.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/ParTest.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,234 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License (version 2) as published by the
+ Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute
+ a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public
+ License and the FreeRTOS license exception along with FreeRTOS; if not it
+ can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the
+ FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and
+ contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety
+ critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting,
+ licensing and training services.
+*/
+
+/*
+ * Modified for mbed NXP LPC1768 board
+ * By Kenji Arai / JH1PJL on March 13th,2010
+ * April 12th, 2010 Changed LPC17xx.h then convert all "GPIO" to "LPC_GPIO"
+ * August 1st, 2010 Change Port definition
+ * August 28th, 2010
+ */
+
+
+/* FreeRTOS.org includes. */
+#include "FreeRTOS.h"
+
+/* Demo application includes. */
+#include "partest.h"
+
+/*-----------------------------------------------------------
+ * Simple parallel port IO routines.
+ *-----------------------------------------------------------*/
+#if (USE_XPRESSO == 1)
+void vParTestInitialise( void )
+{
+ /* LEDs on port 1. */
+ LPC_GPIO0->FIODIR = partstFIO1_BITS;
+ /* Start will all LEDs off. */
+ LPC_GPIO0->FIOCLR = partstFIO1_BITS;
+
+ // Switch
+ LPC_GPIO2->FIODIR &= ~0x00; // Input mode
+ LPC_PINCON->PINMODE4 |= 0x3f3; // Pull-down P2.0,.2,.3,.4
+ //xprintf("GPIO2 = %x\r\n", LPC_GPIO2->FIOPIN);
+ //xprintf("GPIO2.DIR = %x\r\n", LPC_GPIO2->FIODIR);
+}
+/*-----------------------------------------------------------*/
+
+void vParTestSetLED( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue )
+{
+ if( uxLED < partstNUM_LEDS )
+ {
+ /* Set or clear the output. */
+ if( xValue )
+ {
+ LPC_GPIO0->FIOCLR = ulLEDs[ uxLED ];
+ }
+ else
+ {
+ LPC_GPIO0->FIOSET = ulLEDs[ uxLED ];
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
+{
+ if( uxLED < partstNUM_LEDS )
+ {
+ if( LPC_GPIO0->FIOPIN & ulLEDs[ uxLED ] )
+ {
+ LPC_GPIO0->FIOCLR = ulLEDs[ uxLED ];
+ }
+ else
+ {
+ LPC_GPIO0->FIOSET = ulLEDs[ uxLED ];
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+unsigned portBASE_TYPE uxParTextGetLED( unsigned portBASE_TYPE uxLED )
+{
+ if( uxLED < partstNUM_LEDS )
+ {
+ return ( LPC_GPIO0->FIOPIN & ulLEDs[ uxLED ] );
+ }
+ else
+ {
+ return 0;
+ }
+}
+/*-----------------------------------------------------------*/
+#else
+void vParTestInitialise( void )
+{
+ /* LEDs on port 1. */
+ LPC_GPIO1->FIODIR = partstFIO1_BITS;
+ /* Start will all LEDs off. */
+ LPC_GPIO1->FIOCLR = partstFIO1_BITS;
+
+ // Switch
+ LPC_GPIO2->FIODIR &= ~0x00; // Input mode
+ LPC_PINCON->PINMODE4 |= 0x3f3; // Pull-down P2.0,.2,.3,.4
+ //xprintf("GPIO2 = %x\r\n", LPC_GPIO2->FIOPIN);
+ //xprintf("GPIO2.DIR = %x\r\n", LPC_GPIO2->FIODIR);
+}
+/*-----------------------------------------------------------*/
+
+void vParTestSetLED( unsigned portBASE_TYPE uxLED, signed portBASE_TYPE xValue )
+{
+ if( uxLED < partstNUM_LEDS )
+ {
+ /* Set or clear the output. */
+ if( xValue )
+ {
+ LPC_GPIO1->FIOCLR = ulLEDs[ uxLED ];
+ }
+ else
+ {
+ LPC_GPIO1->FIOSET = ulLEDs[ uxLED ];
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+void vParTestToggleLED( unsigned portBASE_TYPE uxLED )
+{
+ if( uxLED < partstNUM_LEDS )
+ {
+ if( LPC_GPIO1->FIOPIN & ulLEDs[ uxLED ] )
+ {
+ LPC_GPIO1->FIOCLR = ulLEDs[ uxLED ];
+ }
+ else
+ {
+ LPC_GPIO1->FIOSET = ulLEDs[ uxLED ];
+ }
+ }
+}
+/*-----------------------------------------------------------*/
+
+unsigned portBASE_TYPE uxParTextGetLED( unsigned portBASE_TYPE uxLED )
+{
+ if( uxLED < partstNUM_LEDS )
+ {
+ return ( LPC_GPIO1->FIOPIN & ulLEDs[ uxLED ] );
+ }
+ else
+ {
+ return 0;
+ }
+}
+/*-----------------------------------------------------------*/
+#endif
+
+unsigned int vParTestSW_Rec( void ){ //Record switch = P2.3 (mbed p23)
+ //xputs("mbed P23 (LPC1768 p2.3) = ");
+ //if (LPC_GPIO2->FIOPIN & 0x08){
+ // xputs("ON \r\n");
+ //} else {
+ // xputs("OFF \r\n");
+ //}
+ if (LPC_GPIO2->FIOPIN & 0x08){
+ //xputs("ON \r\n");
+ return 0;
+ } else {
+ //xputs("OFF \r\n");
+ return 1;
+ }
+}
+
+unsigned int vParTestSW_Mode( void ){ //Record switch = P2.4 (mbed p22)
+ //xputs("mbed P22 (LPC1768 p2.4) = ");
+ //if (LPC_GPIO2->FIOPIN & 0x10){
+ // xputs("ON \r\n");
+ //} else {
+ // xputs("OFF \r\n");
+ //}
+ if (LPC_GPIO2->FIOPIN & 0x10){
+ //xputs("ON \r\n");
+ return 0;
+ } else {
+ //xputs("OFF \r\n");
+ return 1;
+ }
+}
+/*-----------------------------------------------------------*/
+
+
+
+
+
+
+
diff -r 000000000000 -r d4960fcea8ff core_cm3.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/core_cm3.h Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,1366 @@
+/******************************************************************************
+ * @file: core_cm3.h
+ * @purpose: CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version: V1.20
+ * @date: 22. May 2009
+ *----------------------------------------------------------------------------
+ *
+ * Copyright (C) 2009 ARM Limited. All rights reserved.
+ *
+ * ARM Limited (ARM) is supplying this software for use with Cortex-Mx
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+#ifndef __CM3_CORE_H__
+#define __CM3_CORE_H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex core */
+
+/**
+ * Lint configuration \n
+ * ----------------------- \n
+ *
+ * The following Lint messages will be suppressed and not shown: \n
+ * \n
+ * --- Error 10: --- \n
+ * register uint32_t __regBasePri __asm("basepri"); \n
+ * Error 10: Expecting ';' \n
+ * \n
+ * --- Error 530: --- \n
+ * return(__regBasePri); \n
+ * Warning 530: Symbol '__regBasePri' (line 264) not initialized \n
+ * \n
+ * --- Error 550: --- \n
+ * __regBasePri = (basePri & 0x1ff); \n
+ * } \n
+ * Warning 550: Symbol '__regBasePri' (line 271) not accessed \n
+ * \n
+ * --- Error 754: --- \n
+ * uint32_t RESERVED0[24]; \n
+ * Info 754: local structure member '<some, not used in the HAL>' (line 109, file ./cm3_core.h) not referenced \n
+ * \n
+ * --- Error 750: --- \n
+ * #define __CM3_CORE_H__ \n
+ * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced \n
+ * \n
+ * --- Error 528: --- \n
+ * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n
+ * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced \n
+ * \n
+ * --- Error 751: --- \n
+ * } InterruptType_Type; \n
+ * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced \n
+ * \n
+ * \n
+ * Note: To re-enable a Message, insert a space before 'lint' * \n
+ *
+ */
+
+/*lint -save */
+/*lint -e10 */
+/*lint -e530 */
+/*lint -e550 */
+/*lint -e754 */
+/*lint -e750 */
+/*lint -e528 */
+/*lint -e751 */
+
+
+#include <stdint.h> /* Include standard types */
+
+#if defined (__ICCARM__)
+ #include <intrinsics.h> /* IAR Intrinsics */
+#endif
+
+
+#ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */
+#endif
+
+
+
+
+/**
+ * IO definitions
+ *
+ * define access restrictions to peripheral registers
+ */
+
+#ifdef __cplusplus
+#define __I volatile /*!< defines 'read only' permissions */
+#else
+#define __I volatile const /*!< defines 'read only' permissions */
+#endif
+#define __O volatile /*!< defines 'write only' permissions */
+#define __IO volatile /*!< defines 'read / write' permissions */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+
+
+/* System Reset */
+#define NVIC_VECTRESET 0 /*!< Vector Reset Bit */
+#define NVIC_SYSRESETREQ 2 /*!< System Reset Request */
+#define NVIC_AIRCR_VECTKEY (0x5FA << 16) /*!< AIRCR Key for write access */
+#define NVIC_AIRCR_ENDIANESS 15 /*!< Endianess */
+
+/* Core Debug */
+#define CoreDebug_DEMCR_TRCENA (1 << 24) /*!< DEMCR TRCENA enable */
+#define ITM_TCR_ITMENA 1 /*!< ITM enable */
+
+
+
+
+/* memory mapping struct for Nested Vectored Interrupt Controller (NVIC) */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Interrupt Priority Register, 8Bit wide */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Software Trigger Interrupt Register */
+} NVIC_Type;
+
+
+/* memory mapping struct for System Control Block */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< CPU ID Base Register */
+ __IO uint32_t ICSR; /*!< Interrupt Control State Register */
+ __IO uint32_t VTOR; /*!< Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Application Interrupt / Reset Control Register */
+ __IO uint32_t SCR; /*!< System Control Register */
+ __IO uint32_t CCR; /*!< Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Hard Fault Status Register */
+ __IO uint32_t DFSR; /*!< Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Mem Manage Address Register */
+ __IO uint32_t BFAR; /*!< Bus Fault Address Register */
+ __IO uint32_t AFSR; /*!< Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Processor Feature Register */
+ __I uint32_t DFR; /*!< Debug Feature Register */
+ __I uint32_t ADR; /*!< Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< ISA Feature Register */
+} SCB_Type;
+
+
+/* memory mapping struct for SysTick */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< SysTick Calibration Register */
+} SysTick_Type;
+
+
+/* memory mapping structur for ITM */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __IO uint32_t IWR; /*!< ITM Integration Write Register */
+ __IO uint32_t IRR; /*!< ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __IO uint32_t LAR; /*!< ITM Lock Access Register */
+ __IO uint32_t LSR; /*!< ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< ITM Product ID Registers */
+ __I uint32_t PID5;
+ __I uint32_t PID6;
+ __I uint32_t PID7;
+ __I uint32_t PID0;
+ __I uint32_t PID1;
+ __I uint32_t PID2;
+ __I uint32_t PID3;
+ __I uint32_t CID0;
+ __I uint32_t CID1;
+ __I uint32_t CID2;
+ __I uint32_t CID3;
+} ITM_Type;
+
+
+/* memory mapped struct for Interrupt Type */
+typedef struct
+{
+ uint32_t RESERVED0;
+ __I uint32_t ICTR; /*!< Interrupt Control Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Auxiliary Control Register */
+#else
+ uint32_t RESERVED1;
+#endif
+} InterruptType_Type;
+
+
+/* Memory Protection Unit */
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
+typedef struct
+{
+ __I uint32_t TYPE; /*!< MPU Type Register */
+ __IO uint32_t CTRL; /*!< MPU Control Register */
+ __IO uint32_t RNR; /*!< MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+#endif
+
+
+/* Core Debug Register */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000) /*!< ITM Base Address */
+#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */
+
+#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */
+#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */
+#endif
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+
+#endif
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#define __enable_fault_irq __enable_fiq
+#define __disable_fault_irq __disable_fiq
+
+#define __NOP __nop
+#define __WFI __wfi
+#define __WFE __wfe
+#define __SEV __sev
+#define __ISB() __isb(0)
+#define __DSB() __dsb(0)
+#define __DMB() __dmb(0)
+#define __REV __rev
+#define __RBIT __rbit
+#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr))
+#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr))
+#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr))
+#define __STREXB(value, ptr) __strex(value, ptr)
+#define __STREXH(value, ptr) __strex(value, ptr)
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */
+/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @param none
+ * @return uint32_t ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+extern uint32_t __get_PSP(void);
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param uint32_t Process Stack Pointer
+ * @return none
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @param none
+ * @return uint32_t Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+extern uint32_t __get_MSP(void);
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param uint32_t Main Stack Pointer
+ * @return none
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+extern void __set_MSP(uint32_t topOfMainStack);
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param uint16_t value to reverse
+ * @return uint32_t reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+extern uint32_t __REV16(uint16_t value);
+
+/*
+ * @brief Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param int16_t value to reverse
+ * @return int32_t reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+extern int32_t __REVSH(int16_t value);
+
+
+#if (__ARMCC_VERSION < 400000)
+
+/**
+ * @brief Remove the exclusive lock created by ldrex
+ *
+ * @param none
+ * @return none
+ *
+ * Removes the exclusive lock which is created by ldrex.
+ */
+extern void __CLREX(void);
+
+/**
+ * @brief Return the Base Priority value
+ *
+ * @param none
+ * @return uint32_t BasePriority
+ *
+ * Return the content of the base priority register
+ */
+extern uint32_t __get_BASEPRI(void);
+
+/**
+ * @brief Set the Base Priority value
+ *
+ * @param uint32_t BasePriority
+ * @return none
+ *
+ * Set the base priority register
+ */
+extern void __set_BASEPRI(uint32_t basePri);
+
+/**
+ * @brief Return the Priority Mask value
+ *
+ * @param none
+ * @return uint32_t PriMask
+ *
+ * Return the state of the priority mask bit from the priority mask
+ * register
+ */
+extern uint32_t __get_PRIMASK(void);
+
+/**
+ * @brief Set the Priority Mask value
+ *
+ * @param uint32_t PriMask
+ * @return none
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+extern void __set_PRIMASK(uint32_t priMask);
+
+/**
+ * @brief Return the Fault Mask value
+ *
+ * @param none
+ * @return uint32_t FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+extern uint32_t __get_FAULTMASK(void);
+
+/**
+ * @brief Set the Fault Mask value
+ *
+ * @param uint32_t faultMask value
+ * @return none
+ *
+ * Set the fault mask register
+ */
+extern void __set_FAULTMASK(uint32_t faultMask);
+
+/**
+ * @brief Return the Control Register value
+ *
+ * @param none
+ * @return uint32_t Control value
+ *
+ * Return the content of the control register
+ */
+extern uint32_t __get_CONTROL(void);
+
+/**
+ * @brief Set the Control Register value
+ *
+ * @param uint32_t Control value
+ * @return none
+ *
+ * Set the control register
+ */
+extern void __set_CONTROL(uint32_t control);
+
+#else /* (__ARMCC_VERSION >= 400000) */
+
+
+/**
+ * @brief Remove the exclusive lock created by ldrex
+ *
+ * @param none
+ * @return none
+ *
+ * Removes the exclusive lock which is created by ldrex.
+ */
+#define __CLREX __clrex
+
+/**
+ * @brief Return the Base Priority value
+ *
+ * @param none
+ * @return uint32_t BasePriority
+ *
+ * Return the content of the base priority register
+ */
+static __INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+/**
+ * @brief Set the Base Priority value
+ *
+ * @param uint32_t BasePriority
+ * @return none
+ *
+ * Set the base priority register
+ */
+static __INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0x1ff);
+}
+
+/**
+ * @brief Return the Priority Mask value
+ *
+ * @param none
+ * @return uint32_t PriMask
+ *
+ * Return the state of the priority mask bit from the priority mask
+ * register
+ */
+static __INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+/**
+ * @brief Set the Priority Mask value
+ *
+ * @param uint32_t PriMask
+ * @return none
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+static __INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+/**
+ * @brief Return the Fault Mask value
+ *
+ * @param none
+ * @return uint32_t FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+static __INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+/**
+ * @brief Set the Fault Mask value
+ *
+ * @param uint32_t faultMask value
+ * @return none
+ *
+ * Set the fault mask register
+ */
+static __INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & 1);
+}
+
+/**
+ * @brief Return the Control Register value
+ *
+ * @param none
+ * @return uint32_t Control value
+ *
+ * Return the content of the control register
+ */
+static __INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+/**
+ * @brief Set the Control Register value
+ *
+ * @param uint32_t Control value
+ * @return none
+ *
+ * Set the control register
+ */
+static __INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+#endif /* __ARMCC_VERSION */
+
+
+
+#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#define __enable_irq __enable_interrupt /*!< global Interrupt enable */
+#define __disable_irq __disable_interrupt /*!< global Interrupt disable */
+
+static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); }
+static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); }
+
+#define __NOP __no_operation() /*!< no operation intrinsic in IAR Compiler */
+static __INLINE void __WFI() { __ASM ("wfi"); }
+static __INLINE void __WFE() { __ASM ("wfe"); }
+static __INLINE void __SEV() { __ASM ("sev"); }
+static __INLINE void __CLREX() { __ASM ("clrex"); }
+
+/* intrinsic void __ISB(void) */
+/* intrinsic void __DSB(void) */
+/* intrinsic void __DMB(void) */
+/* intrinsic void __set_PRIMASK(); */
+/* intrinsic void __get_PRIMASK(); */
+/* intrinsic void __set_FAULTMASK(); */
+/* intrinsic void __get_FAULTMASK(); */
+/* intrinsic uint32_t __REV(uint32_t value); */
+/* intrinsic uint32_t __REVSH(uint32_t value); */
+/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */
+/* intrinsic unsigned long __LDREX(unsigned long *); */
+
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @param none
+ * @return uint32_t ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+extern uint32_t __get_PSP(void);
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param uint32_t Process Stack Pointer
+ * @return none
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @param none
+ * @return uint32_t Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+extern uint32_t __get_MSP(void);
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param uint32_t Main Stack Pointer
+ * @return none
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+extern void __set_MSP(uint32_t topOfMainStack);
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param uint16_t value to reverse
+ * @return uint32_t reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+extern uint32_t __REV16(uint16_t value);
+
+/**
+ * @brief Reverse bit order of value
+ *
+ * @param uint32_t value to reverse
+ * @return uint32_t reversed value
+ *
+ * Reverse bit order of value
+ */
+extern uint32_t __RBIT(uint32_t value);
+
+/**
+ * @brief LDR Exclusive
+ *
+ * @param uint8_t* address
+ * @return uint8_t value of (*address)
+ *
+ * Exclusive LDR command
+ */
+extern uint8_t __LDREXB(uint8_t *addr);
+
+/**
+ * @brief LDR Exclusive
+ *
+ * @param uint16_t* address
+ * @return uint16_t value of (*address)
+ *
+ * Exclusive LDR command
+ */
+extern uint16_t __LDREXH(uint16_t *addr);
+
+/**
+ * @brief LDR Exclusive
+ *
+ * @param uint32_t* address
+ * @return uint32_t value of (*address)
+ *
+ * Exclusive LDR command
+ */
+extern uint32_t __LDREXW(uint32_t *addr);
+
+/**
+ * @brief STR Exclusive
+ *
+ * @param uint8_t *address
+ * @param uint8_t value to store
+ * @return uint32_t successful / failed
+ *
+ * Exclusive STR command
+ */
+extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
+
+/**
+ * @brief STR Exclusive
+ *
+ * @param uint16_t *address
+ * @param uint16_t value to store
+ * @return uint32_t successful / failed
+ *
+ * Exclusive STR command
+ */
+extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
+
+/**
+ * @brief STR Exclusive
+ *
+ * @param uint32_t *address
+ * @param uint32_t value to store
+ * @return uint32_t successful / failed
+ *
+ * Exclusive STR command
+ */
+extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
+
+
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+static __INLINE void __enable_irq() { __ASM volatile ("cpsie i"); }
+static __INLINE void __disable_irq() { __ASM volatile ("cpsid i"); }
+
+static __INLINE void __enable_fault_irq() { __ASM volatile ("cpsie f"); }
+static __INLINE void __disable_fault_irq() { __ASM volatile ("cpsid f"); }
+
+static __INLINE void __NOP() { __ASM volatile ("nop"); }
+static __INLINE void __WFI() { __ASM volatile ("wfi"); }
+static __INLINE void __WFE() { __ASM volatile ("wfe"); }
+static __INLINE void __SEV() { __ASM volatile ("sev"); }
+static __INLINE void __ISB() { __ASM volatile ("isb"); }
+static __INLINE void __DSB() { __ASM volatile ("dsb"); }
+static __INLINE void __DMB() { __ASM volatile ("dmb"); }
+static __INLINE void __CLREX() { __ASM volatile ("clrex"); }
+
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @param none
+ * @return uint32_t ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+extern uint32_t __get_PSP(void);
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param uint32_t Process Stack Pointer
+ * @return none
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @param none
+ * @return uint32_t Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+extern uint32_t __get_MSP(void);
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param uint32_t Main Stack Pointer
+ * @return none
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+extern void __set_MSP(uint32_t topOfMainStack);
+
+/**
+ * @brief Return the Base Priority value
+ *
+ * @param none
+ * @return uint32_t BasePriority
+ *
+ * Return the content of the base priority register
+ */
+extern uint32_t __get_BASEPRI(void);
+
+/**
+ * @brief Set the Base Priority value
+ *
+ * @param uint32_t BasePriority
+ * @return none
+ *
+ * Set the base priority register
+ */
+extern void __set_BASEPRI(uint32_t basePri);
+
+/**
+ * @brief Return the Priority Mask value
+ *
+ * @param none
+ * @return uint32_t PriMask
+ *
+ * Return the state of the priority mask bit from the priority mask
+ * register
+ */
+extern uint32_t __get_PRIMASK(void);
+
+/**
+ * @brief Set the Priority Mask value
+ *
+ * @param uint32_t PriMask
+ * @return none
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+extern void __set_PRIMASK(uint32_t priMask);
+
+/**
+ * @brief Return the Fault Mask value
+ *
+ * @param none
+ * @return uint32_t FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+extern uint32_t __get_FAULTMASK(void);
+
+/**
+ * @brief Set the Fault Mask value
+ *
+ * @param uint32_t faultMask value
+ * @return none
+ *
+ * Set the fault mask register
+ */
+extern void __set_FAULTMASK(uint32_t faultMask);
+
+/**
+ * @brief Return the Control Register value
+*
+* @param none
+* @return uint32_t Control value
+ *
+ * Return the content of the control register
+ */
+extern uint32_t __get_CONTROL(void);
+
+/**
+ * @brief Set the Control Register value
+ *
+ * @param uint32_t Control value
+ * @return none
+ *
+ * Set the control register
+ */
+extern void __set_CONTROL(uint32_t control);
+
+/**
+ * @brief Reverse byte order in integer value
+ *
+ * @param uint32_t value to reverse
+ * @return uint32_t reversed value
+ *
+ * Reverse byte order in integer value
+ */
+extern uint32_t __REV(uint32_t value);
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param uint16_t value to reverse
+ * @return uint32_t reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+extern uint32_t __REV16(uint16_t value);
+
+/*
+ * Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param int16_t value to reverse
+ * @return int32_t reversed value
+ *
+ * @brief Reverse byte order in signed short value with sign extension to integer
+ */
+extern int32_t __REVSH(int16_t value);
+
+/**
+ * @brief Reverse bit order of value
+ *
+ * @param uint32_t value to reverse
+ * @return uint32_t reversed value
+ *
+ * Reverse bit order of value
+ */
+extern uint32_t __RBIT(uint32_t value);
+
+/**
+ * @brief LDR Exclusive
+ *
+ * @param uint8_t* address
+ * @return uint8_t value of (*address)
+ *
+ * Exclusive LDR command
+ */
+extern uint8_t __LDREXB(uint8_t *addr);
+
+/**
+ * @brief LDR Exclusive
+ *
+ * @param uint16_t* address
+ * @return uint16_t value of (*address)
+ *
+ * Exclusive LDR command
+ */
+extern uint16_t __LDREXH(uint16_t *addr);
+
+/**
+ * @brief LDR Exclusive
+ *
+ * @param uint32_t* address
+ * @return uint32_t value of (*address)
+ *
+ * Exclusive LDR command
+ */
+extern uint32_t __LDREXW(uint32_t *addr);
+
+/**
+ * @brief STR Exclusive
+ *
+ * @param uint8_t *address
+ * @param uint8_t value to store
+ * @return uint32_t successful / failed
+ *
+ * Exclusive STR command
+ */
+extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
+
+/**
+ * @brief STR Exclusive
+ *
+ * @param uint16_t *address
+ * @param uint16_t value to store
+ * @return uint32_t successful / failed
+ *
+ * Exclusive STR command
+ */
+extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
+
+/**
+ * @brief STR Exclusive
+ *
+ * @param uint32_t *address
+ * @param uint32_t value to store
+ * @return uint32_t successful / failed
+ *
+ * Exclusive STR command
+ */
+extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
+
+
+#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+
+
+/* ########################## NVIC functions #################################### */
+
+
+/**
+ * @brief Set the Priority Grouping in NVIC Interrupt Controller
+ *
+ * @param uint32_t priority_grouping is priority grouping field
+ * @return none
+ *
+ * Set the priority grouping field using the required unlock sequence.
+ * The parameter priority_grouping is assigned to the field
+ * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used.
+ * In case of a conflict between priority grouping and available
+ * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ */
+static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~((0xFFFFU << 16) | (0x0F << 8)); /* clear bits to change */
+ reg_value = ((reg_value | NVIC_AIRCR_VECTKEY | (PriorityGroupTmp << 8))); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+/**
+ * @brief Get the Priority Grouping from NVIC Interrupt Controller
+ *
+ * @param none
+ * @return uint32_t priority grouping field
+ *
+ * Get the priority grouping from NVIC Interrupt Controller.
+ * priority grouping is SCB->AIRCR [10:8] PRIGROUP field.
+ */
+static __INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR >> 8) & 0x07); /* read priority grouping field */
+}
+
+/**
+ * @brief Enable Interrupt in NVIC Interrupt Controller
+ *
+ * @param IRQn_Type IRQn specifies the interrupt number
+ * @return none
+ *
+ * Enable a device specific interupt in the NVIC interrupt controller.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+/**
+ * @brief Disable the interrupt line for external interrupt specified
+ *
+ * @param IRQn_Type IRQn is the positive number of the external interrupt
+ * @return none
+ *
+ * Disable a device specific interupt in the NVIC interrupt controller.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+/**
+ * @brief Read the interrupt pending bit for a device specific interrupt source
+ *
+ * @param IRQn_Type IRQn is the number of the device specifc interrupt
+ * @return uint32_t 1 if pending interrupt else 0
+ *
+ * Read the pending register in NVIC and return 1 if its status is pending,
+ * otherwise it returns 0
+ */
+static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+/**
+ * @brief Set the pending bit for an external interrupt
+ *
+ * @param IRQn_Type IRQn is the Number of the interrupt
+ * @return none
+ *
+ * Set the pending bit for the specified interrupt.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+/**
+ * @brief Clear the pending bit for an external interrupt
+ *
+ * @param IRQn_Type IRQn is the Number of the interrupt
+ * @return none
+ *
+ * Clear the pending bit for the specified interrupt.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+/**
+ * @brief Read the active bit for an external interrupt
+ *
+ * @param IRQn_Type IRQn is the Number of the interrupt
+ * @return uint32_t 1 if active else 0
+ *
+ * Read the active register in NVIC and returns 1 if its status is active,
+ * otherwise it returns 0.
+ */
+static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+/**
+ * @brief Set the priority for an interrupt
+ *
+ * @param IRQn_Type IRQn is the Number of the interrupt
+ * @param priority is the priority for the interrupt
+ * @return none
+ *
+ * Set the priority for the specified interrupt. The interrupt
+ * number can be positive to specify an external (device specific)
+ * interrupt, or negative to specify an internal (core) interrupt. \n
+ *
+ * Note: The priority cannot be set for every core interrupt.
+ */
+static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+/**
+ * @brief Read the priority for an interrupt
+ *
+ * @param IRQn_Type IRQn is the Number of the interrupt
+ * @return uint32_t priority is the priority for the interrupt
+ *
+ * Read the priority for the specified interrupt. The interrupt
+ * number can be positive to specify an external (device specific)
+ * interrupt, or negative to specify an internal (core) interrupt.
+ *
+ * The returned priority value is automatically aligned to the implemented
+ * priority bits of the microcontroller.
+ *
+ * Note: The priority cannot be set for every core interrupt.
+ */
+static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/**
+ * @brief Encode the priority for an interrupt
+ *
+ * @param uint32_t PriorityGroup is the used priority group
+ * @param uint32_t PreemptPriority is the preemptive priority value (starting from 0)
+ * @param uint32_t SubPriority is the sub priority value (starting from 0)
+ * @return uint32_t the priority for the interrupt
+ *
+ * Encode the priority for an interrupt with the given priority group,
+ * preemptive priority value and sub priority value.
+ * In case of a conflict between priority grouping and available
+ * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+ *
+ * The returned priority value can be used for NVIC_SetPriority(...) function
+ */
+static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/**
+ * @brief Decode the priority of an interrupt
+ *
+ * @param uint32_t Priority the priority for the interrupt
+ * @param uint32_t PrioGroup is the used priority group
+ * @param uint32_t* pPreemptPrio is the preemptive priority value (starting from 0)
+ * @param uint32_t* pSubPrio is the sub priority value (starting from 0)
+ * @return none
+ *
+ * Decode an interrupt priority value with the given priority group to
+ * preemptive priority value and sub priority value.
+ * In case of a conflict between priority grouping and available
+ * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+ *
+ * The priority value can be retrieved with NVIC_GetPriority(...) function
+ */
+static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+
+/* ################################## SysTick function ############################################ */
+
+#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0)
+
+/* SysTick constants */
+#define SYSTICK_ENABLE 0 /* Config-Bit to start or stop the SysTick Timer */
+#define SYSTICK_TICKINT 1 /* Config-Bit to enable or disable the SysTick interrupt */
+#define SYSTICK_CLKSOURCE 2 /* Clocksource has the offset 2 in SysTick Control and Status Register */
+#define SYSTICK_MAXCOUNT ((1<<24) -1) /* SysTick MaxCount */
+
+/**
+ * @brief Initialize and start the SysTick counter and its interrupt.
+ *
+ * @param uint32_t ticks is the number of ticks between two interrupts
+ * @return none
+ *
+ * Initialise the system tick timer and its interrupt and start the
+ * system tick timer / counter in free running mode to generate
+ * periodical interrupts.
+ */
+static __INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if (ticks > SYSTICK_MAXCOUNT) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = (ticks & SYSTICK_MAXCOUNT) - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
+ SysTick->VAL = (0x00); /* Load the SysTick Counter Value */
+ SysTick->CTRL = (1 << SYSTICK_CLKSOURCE) | (1<<SYSTICK_ENABLE) | (1<<SYSTICK_TICKINT); /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+#endif
+
+
+
+
+
+/* ################################## Reset function ############################################ */
+
+/**
+ * @brief Initiate a system reset request.
+ *
+ * @param none
+ * @return none
+ *
+ * Initialize a system reset request to reset the MCU
+ */
+static __INLINE void NVIC_SystemReset(void)
+{
+ SCB->AIRCR = (NVIC_AIRCR_VECTKEY | (SCB->AIRCR & (0x700)) | (1<<NVIC_SYSRESETREQ)); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+
+/* ################################## Debug Output function ############################################ */
+
+
+/**
+ * @brief Outputs a character via the ITM channel 0
+ *
+ * @param uint32_t character to output
+ * @return uint32_t input character
+ *
+ * The function outputs a character via the ITM channel 0.
+ * The function returns when no debugger is connected that has booked the output.
+ * It is blocking when a debugger is connected, but the previous character send is not transmitted.
+ */
+static __INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if (ch == '\n') ITM_SendChar('\r');
+
+ if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA) &&
+ (ITM->TCR & ITM_TCR_ITMENA) &&
+ (ITM->TER & (1UL << 0)) )
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CM3_CORE_H__ */
+
+/*lint -restore */
diff -r 000000000000 -r d4960fcea8ff main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,490 @@
+/*
+ FreeRTOS V6.0.3 - Copyright (C) 2010 Real Time Engineers Ltd.
+
+ ***************************************************************************
+ * *
+ * If you are: *
+ * *
+ * + New to FreeRTOS, *
+ * + Wanting to learn FreeRTOS or multitasking in general quickly *
+ * + Looking for basic training, *
+ * + Wanting to improve your FreeRTOS skills and productivity *
+ * *
+ * then take a look at the FreeRTOS eBook *
+ * *
+ * "Using the FreeRTOS Real Time Kernel - a Practical Guide" *
+ * http://www.FreeRTOS.org/Documentation *
+ * *
+ * A pdf reference manual is also available. Both are usually delivered *
+ * to your inbox within 20 minutes to two hours when purchased between 8am *
+ * and 8pm GMT (although please allow up to 24 hours in case of *
+ * exceptional circumstances). Thank you for your support! *
+ * *
+ ***************************************************************************
+
+ This file is part of the FreeRTOS distribution.
+
+ FreeRTOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License (version 2) as published by the Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+ ***NOTE*** The exception to the GPL is included to allow you to distribute a combined work that includes FreeRTOS without being obliged to provide the
+ source code for proprietary components outside of the FreeRTOS kernel.
+ FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details. You should have received a copy of the GNU General Public License and the FreeRTOS license exception along with FreeRTOS; if not it can be viewed here: http://www.freertos.org/a00114.html and also obtained
+ by writing to Richard Barry, contact details for whom are available on the FreeRTOS WEB site.
+
+ 1 tab == 4 spaces!
+
+ http://www.FreeRTOS.org - Documentation, latest information, license and contact details.
+
+ http://www.SafeRTOS.com - A version that is certified for use in safety critical systems.
+
+ http://www.OpenRTOS.com - Commercial support, development, porting, licensing and training services.
+*/
+
+//#error The batch file Demo\CORTEX_LPC1768_GCC_RedSuite\CreateProjectDirectoryStructure.bat must be executed before the first build. After executing the batch file hit F5 to refrech the Eclipse project, then delete this line.
+
+/*
+ * Creates all the demo application tasks, then starts the scheduler. The WEB documentation provides more details of the standard demo application tasks
+ * (which just exist to test the kernel port and provide an example of how to use each FreeRTOS API function).
+ *
+ * In addition to the standard demo tasks, the following tasks and tests are defined and/or created within this file:
+ *
+ * "Check" hook - This only executes fully every five seconds from the tick hook. Its main function is to check that all the standard demo tasks are
+ * still operational. The status can be viewed using on the Task Stats page served by the WEB server.
+ *
+ * "uIP" task - This is the task that handles the uIP stack. All TCP/IP processing is performed in this task.
+ *
+ * "USB" task - Enumerates the USB device as a CDC class, then echoes back all received characters with a configurable offset (for example, if the offset
+ * is 1 and 'A' is received then 'B' will be sent back). A dumb terminal such as Hyperterminal can be used to talk to the USB task.
+ */
+/*----------------------------------------------------------------------------------------------------------*/
+/*
+ * Modified for mbed IDE development environment
+ * By Kenji Arai / JH1PJL on October 28th,2010
+ * October 28th,2010
+ */
+
+#include <stdio.h>
+
+#include "FreeRTOS.h"
+#include "task.h"
+
+#include "integer.h"
+#include "BlockQ.h"
+#include "blocktim.h"
+#include "flash.h"
+#include "partest.h"
+#include "semtest.h"
+#include "PollQ.h"
+#include "GenQTest.h"
+#include "QPeek.h"
+#include "queue.h"
+#include "recmutex.h"
+
+/*----------------------------------------------------------------------------------------------------------*/
+/* The time between cycles of the 'check' functionality (defined within the tick hook. */
+#define mainCHECK_DELAY ( ( portTickType ) 5000 / portTICK_RATE_MS )
+
+/* Task priorities. */
+#define mainQUEUE_POLL_PRIORITY ( tskIDLE_PRIORITY + 2 )
+#define mainSEM_TEST_PRIORITY ( tskIDLE_PRIORITY + 1 )
+#define mainBLOCK_Q_PRIORITY ( tskIDLE_PRIORITY + 2 )
+#define mainUIP_TASK_PRIORITY ( tskIDLE_PRIORITY + 3 )
+#define mainINTEGER_TASK_PRIORITY ( tskIDLE_PRIORITY )
+#define mainGEN_QUEUE_TASK_PRIORITY ( tskIDLE_PRIORITY )
+#define mainFLASH_TASK_PRIORITY ( tskIDLE_PRIORITY + 2 )
+
+/* LED */
+#define LED1 0
+#define LED2 1
+#define LED3 2
+#define LED4 3
+
+// FLASH
+#define FLASH_SETUP 1
+#define FLASHCFG_Val 0x0000303A
+
+// Define clocks
+#define XTAL (12000000UL) /* Oscillator frequency */
+#define OSC_CLK ( XTAL) /* Main oscillator frequency */
+#define RTC_CLK ( 32000UL) /* RTC oscillator frequency */
+#define IRC_OSC ( 4000000UL) /* Internal RC oscillator frequency */
+
+/*----------------------------------------------------------------------------------------------------------*/
+// Configure the hardware for mbed board
+static void prvSetupHardware( void );
+static void prvSetupSystem( void );
+
+//Control tasks for JH1PJL
+void vTask1( void *pvParameters );
+void vTask2( void *pvParameters );
+void vTask3( void *pvParameters );
+void vTask4( void *pvParameters );
+void vTask5( void *pvParameters );
+void vTask6( void *pvParameters );
+void vTask7( void *pvParameters );
+
+/*----------------------------------------------------------------------------------------------------------*/
+uint32_t SystemFrequency; /*!< System Clock Frequency (Core Clock) */
+
+unsigned portBASE_TYPE uxHiWtrMrk_tsk1, uxHiWtrMrk_tsk2;
+unsigned portBASE_TYPE uxHiWtrMrk_tsk3, uxHiWtrMrk_tsk4, uxHiWtrMrk_tsk5;
+unsigned portBASE_TYPE uxHiWtrMrk_tsk6, uxHiWtrMrk_tsk7;
+
+////////////////////////////// Constant Data /////////////////////////////////////////////////////////////////
+/* ---------------------------< Copyright >---------------------------------------------------------------- */
+const uint8_t copyright[] = "Arai,Kenji / JH1PJL(c)2010 kenjia@sannet.ne.jp "__DATE__" (" __TIME__ ")";
+#if ( USE_XPRESSO == 1 )
+/* ---------------------------< Board >---------------------------------------------------------------- */
+const uint8_t board[] = "LPCXpresso LPC1768";
+/*----------------------------------------------------------------------------------------------------------*/
+#elif ( USE_MBED == 1 )
+/* ---------------------------< Board >---------------------------------------------------------------- */
+const uint8_t board[] = "med LPC1768";
+#else
+/* ---------------------------< Board >---------------------------------------------------------------- */
+const uint8_t board[] = "No identification";
+#endif
+
+int main( void ){
+// char cIPAddress[ 16 ];
+ /* Configure the hardware for mbed board */
+ prvSetupHardware();
+ prvSetupSystem();
+
+ /* Start the standard demo tasks. These are just here to exercise the kernel port and provide examples of how the FreeRTOS API can be used. */
+ vStartBlockingQueueTasks( mainBLOCK_Q_PRIORITY );
+ vCreateBlockTimeTasks();
+ vStartSemaphoreTasks( mainSEM_TEST_PRIORITY );
+ vStartPolledQueueTasks( mainQUEUE_POLL_PRIORITY );
+ vStartIntegerMathTasks( mainINTEGER_TASK_PRIORITY );
+ vStartGenericQueueTasks( mainGEN_QUEUE_TASK_PRIORITY );
+ vStartQueuePeekTasks();
+ vStartRecursiveMutexTasks();
+
+ // ??? Task
+ xTaskCreate( vTask1, ( signed char * ) "Task1", ( ( unsigned short ) 96 ), ( void * ) NULL, tskIDLE_PRIORITY, NULL );
+ // ??? Task
+ xTaskCreate( vTask2, ( signed char * ) "Task2", ( ( unsigned short ) 96 ), ( void * ) NULL, tskIDLE_PRIORITY, NULL );
+ // ??? Task
+ xTaskCreate( vTask3, ( signed char * ) "Task3", ( ( unsigned short ) 96 ), ( void * ) NULL, tskIDLE_PRIORITY, NULL );
+ // ??? Task
+ xTaskCreate( vTask4, ( signed char * ) "Task4", ( ( unsigned short ) 96 ), ( void * ) NULL, tskIDLE_PRIORITY, NULL );
+ // ??? Task
+ xTaskCreate( vTask5, ( signed char * ) "Task5", ( ( unsigned short ) 96 ), ( void * ) NULL, tskIDLE_PRIORITY, NULL );
+ // ??? Task
+ xTaskCreate( vTask6, ( signed char * ) "Task6", ( ( unsigned short ) 96 ), ( void * ) NULL, tskIDLE_PRIORITY, NULL );
+ // ??? Task
+ xTaskCreate( vTask7, ( signed char * ) "Task7", ( ( unsigned short ) 96 ), ( void * ) NULL, tskIDLE_PRIORITY, NULL );
+
+ /* Start the scheduler. */
+ vTaskStartScheduler();
+
+ /* Will only get here if there was insufficient memory to create the idle task. The idle task is created within vTaskStartScheduler(). */
+ for( ;; );
+}
+/*----------------------------------------------------------------------------------------------------------*/
+
+/***** TASK #1 ******/
+// ????
+void vTask1 ( void *pvParameters ){
+ portTickType xLastCheckTime;
+ portTickType xDelayTime;
+
+ xDelayTime = 125 / portTICK_RATE_MS;
+ xLastCheckTime = xTaskGetTickCount();
+ while(1){
+ vTaskDelayUntil( &xLastCheckTime, xDelayTime );
+ vParTestToggleLED( LED1 );
+ uxHiWtrMrk_tsk1 = uxTaskGetStackHighWaterMark( NULL );
+ }
+}
+/*----------------------------------------------------------------------------------------------------------*/
+
+/***** TASK #2 ******/
+// ???
+void vTask2 ( void *pvParameters ){
+ portTickType xLastCheckTime;
+ portTickType xDelayTime;
+
+ xDelayTime = 250 / portTICK_RATE_MS;
+ xLastCheckTime = xTaskGetTickCount();
+ while(1){
+ vTaskDelayUntil( &xLastCheckTime, xDelayTime );
+ vParTestToggleLED( LED2 );
+ uxHiWtrMrk_tsk2 = uxTaskGetStackHighWaterMark( NULL );
+ }
+}
+/*----------------------------------------------------------------------------------------------------------*/
+
+/***** TASK #3 ******/
+// ???
+void vTask3 ( void *pvParameters ){
+ portTickType xLastCheckTime;
+ portTickType xDelayTime;
+
+ xDelayTime = 500 / portTICK_RATE_MS;
+ xLastCheckTime = xTaskGetTickCount();
+ while(1){
+ vTaskDelayUntil( &xLastCheckTime, xDelayTime );
+ vParTestToggleLED( LED3 );
+ uxHiWtrMrk_tsk2 = uxTaskGetStackHighWaterMark( NULL );
+ }
+}
+/*----------------------------------------------------------------------------------------------------------*/
+
+/***** TASK #4 ******/
+// ???
+void vTask4(void *pvParameters) {
+ portTickType xLastCheckTime;
+ portTickType xDelayTime;
+
+ xDelayTime = 1000 / portTICK_RATE_MS;
+ xLastCheckTime = xTaskGetTickCount();
+ while(1){
+ vTaskDelayUntil( &xLastCheckTime, xDelayTime );
+ vParTestToggleLED( LED4 );
+ uxHiWtrMrk_tsk2 = uxTaskGetStackHighWaterMark( NULL );
+ }
+}
+/*----------------------------------------------------------------------------------------------------------*/
+
+/***** TASK #5 ******/
+// ?????
+void vTask5 ( void *pvParameters ){
+
+ vTaskDelay( 100 / portTICK_RATE_MS ); // Wait 0.1sec
+ while(1){
+ vTaskDelay( 10000 / portTICK_RATE_MS ); // Wait 10sec
+ uxHiWtrMrk_tsk5 = uxTaskGetStackHighWaterMark( NULL );
+ }
+}
+/*----------------------------------------------------------------------------------------------------------*/
+
+/***** TASK #6 ******/
+// ????
+void vTask6(void *pvParameters) {
+ portTickType xLastCheckTime;
+ portTickType xDelayTime;
+
+ vTaskDelay( 200 / portTICK_RATE_MS ); // Wait
+ xDelayTime = 25 / portTICK_RATE_MS;
+ xLastCheckTime = xTaskGetTickCount(); // Need to initialize time prior to the first call to vTaskDelayUntil()
+ while(1){
+ vTaskDelayUntil( &xLastCheckTime, xDelayTime );
+ uxHiWtrMrk_tsk6 = uxTaskGetStackHighWaterMark( NULL );
+ }
+}
+
+/***** TASK #7******/
+// ????
+void vTask7(void *pvParameters) {
+ portTickType xLastCheckTime;
+ portTickType xDelayTime;
+
+ xDelayTime = 10 / portTICK_RATE_MS; // 10mS interval
+ xLastCheckTime = xTaskGetTickCount();
+ while(1){
+ vTaskDelayUntil( &xLastCheckTime, xDelayTime );
+ uxHiWtrMrk_tsk7 = uxTaskGetStackHighWaterMark( NULL );
+ }
+}
+/*----------------------------------------------------------------------------------------------------------*/
+
+void vApplicationTickHook( void ){
+ static unsigned long ulTicksSinceLastDisplay = 0;
+
+ /* Called from every tick interrupt as described in the comments at the top of this file.
+ Have enough ticks passed to make it time to perform our health status check again? */
+ ulTicksSinceLastDisplay++;
+ if( ulTicksSinceLastDisplay >= mainCHECK_DELAY ){
+ /* Reset the counter so these checks run again in mainCHECK_DELAY
+ ticks time. */
+ ulTicksSinceLastDisplay = 0;
+ }
+}
+/*----------------------------------------------------------------------------------------------------------*/
+
+char *pcGetTaskStatusMessage( void ){
+ /* Not bothered about a critical section here. */
+ return 0;
+}
+/*----------------------------------------------------------------------------------------------------------*/
+
+void prvSetupSystem( void ){
+ ;
+}
+/*----------------------------------------------------------------------------------------------------------*/
+
+void prvSetupHardware( void ){
+ /* Disable peripherals power. */
+ LPC_SC->PCONP = 0;
+
+ /* Enable GPIO power. */
+ LPC_SC->PCONP = PCONP_PCGPIO;
+
+ /* Disable TPIU. */
+ LPC_PINCON->PINSEL10 = 0;
+
+ if ( LPC_SC->PLL0STAT & ( 1 << 25 ) ){
+ /* Enable PLL, disconnected. */
+ LPC_SC->PLL0CON = 1;
+ LPC_SC->PLL0FEED = PLLFEED_FEED1;
+ LPC_SC->PLL0FEED = PLLFEED_FEED2;
+ }
+
+ /* Disable PLL, disconnected. */
+ LPC_SC->PLL0CON = 0;
+ LPC_SC->PLL0FEED = PLLFEED_FEED1;
+ LPC_SC->PLL0FEED = PLLFEED_FEED2;
+
+ /* Enable main OSC. */
+ LPC_SC->SCS |= 0x20;
+ while( !( LPC_SC->SCS & 0x40 ) );
+
+ /* select main OSC, 12MHz, as the PLL clock source. */
+ LPC_SC->CLKSRCSEL = 0x1;
+
+ LPC_SC->PLL0CFG = 0x20031;
+ LPC_SC->PLL0FEED = PLLFEED_FEED1;
+ LPC_SC->PLL0FEED = PLLFEED_FEED2;
+
+ /* Enable PLL, disconnected. */
+ LPC_SC->PLL0CON = 1;
+ LPC_SC->PLL0FEED = PLLFEED_FEED1;
+ LPC_SC->PLL0FEED = PLLFEED_FEED2;
+
+ /* Set clock divider. */
+ LPC_SC->CCLKCFG = 0x03;
+
+ /* Configure flash accelerator. */
+ LPC_SC->FLASHCFG = 0x403a;
+
+ /* Check lock bit status. */
+ while( ( ( LPC_SC->PLL0STAT & ( 1 << 26 ) ) == 0 ) );
+
+ /* Enable and connect. */
+ LPC_SC->PLL0CON = 3;
+ LPC_SC->PLL0FEED = PLLFEED_FEED1;
+ LPC_SC->PLL0FEED = PLLFEED_FEED2;
+ while( ( ( LPC_SC->PLL0STAT & ( 1 << 25 ) ) == 0 ) );
+
+
+ /* Configure the clock for the USB. */
+
+ if( LPC_SC->PLL1STAT & ( 1 << 9 ) )
+ {
+ /* Enable PLL, disconnected. */
+ LPC_SC->PLL1CON = 1;
+ LPC_SC->PLL1FEED = PLLFEED_FEED1;
+ LPC_SC->PLL1FEED = PLLFEED_FEED2;
+ }
+
+ /* Disable PLL, disconnected. */
+ LPC_SC->PLL1CON = 0;
+ LPC_SC->PLL1FEED = PLLFEED_FEED1;
+ LPC_SC->PLL1FEED = PLLFEED_FEED2;
+
+ LPC_SC->PLL1CFG = 0x23;
+ LPC_SC->PLL1FEED = PLLFEED_FEED1;
+ LPC_SC->PLL1FEED = PLLFEED_FEED2;
+
+ /* Enable PLL, disconnected. */
+ LPC_SC->PLL1CON = 1;
+ LPC_SC->PLL1FEED = PLLFEED_FEED1;
+ LPC_SC->PLL1FEED = PLLFEED_FEED2;
+ while( ( ( LPC_SC->PLL1STAT & ( 1 << 10 ) ) == 0 ) );
+
+ /* Enable and connect. */
+ LPC_SC->PLL1CON = 3;
+ LPC_SC->PLL1FEED = PLLFEED_FEED1;
+ LPC_SC->PLL1FEED = PLLFEED_FEED2;
+ while( ( ( LPC_SC->PLL1STAT & ( 1 << 9 ) ) == 0 ) );
+
+ /* Setup the peripheral bus to be the same as the PLL output (64 MHz). */
+ LPC_SC->PCLKSEL0 = 0x05555555;
+
+ /* Porting from system_LPC17xx.c void SystemInit() */
+ /* Determine clock frequency according to clock register values */
+ if (((LPC_SC->PLL0STAT >> 24) & 3) == 3) {/* If PLL0 enabled and connected */
+ switch (LPC_SC->CLKSRCSEL & 0x03) {
+ case 0: /* Internal RC oscillator => PLL0 */
+ case 3: /* Reserved, default to Internal RC */
+ SystemFrequency = (IRC_OSC *
+ (((2 * ((LPC_SC->PLL0STAT & 0x7FFF) + 1))) /
+ (((LPC_SC->PLL0STAT >> 16) & 0xFF) + 1)) /
+ ((LPC_SC->CCLKCFG & 0xFF)+ 1));
+ break;
+ case 1: /* Main oscillator => PLL0 */
+ SystemFrequency = (OSC_CLK *
+ (((2 * ((LPC_SC->PLL0STAT & 0x7FFF) + 1))) /
+ (((LPC_SC->PLL0STAT >> 16) & 0xFF) + 1)) /
+ ((LPC_SC->CCLKCFG & 0xFF)+ 1));
+ break;
+ case 2: /* RTC oscillator => PLL0 */
+ SystemFrequency = (RTC_CLK *
+ (((2 * ((LPC_SC->PLL0STAT & 0x7FFF) + 1))) /
+ (((LPC_SC->PLL0STAT >> 16) & 0xFF) + 1)) /
+ ((LPC_SC->CCLKCFG & 0xFF)+ 1));
+ break;
+ }
+ } else {
+ switch (LPC_SC->CLKSRCSEL & 0x03) {
+ case 0: /* Internal RC oscillator => PLL0 */
+ case 3: /* Reserved, default to Internal RC */
+ SystemFrequency = IRC_OSC / ((LPC_SC->CCLKCFG & 0xFF)+ 1);
+ break;
+ case 1: /* Main oscillator => PLL0 */
+ SystemFrequency = OSC_CLK / ((LPC_SC->CCLKCFG & 0xFF)+ 1);
+ break;
+ case 2: /* RTC oscillator => PLL0 */
+ SystemFrequency = RTC_CLK / ((LPC_SC->CCLKCFG & 0xFF)+ 1);
+ break;
+ }
+ }
+
+ #if (FLASH_SETUP == 1) /* Flash Accelerator Setup */
+ LPC_SC->FLASHCFG = FLASHCFG_Val;
+ #endif
+
+ /* Configure the LEDs. */
+ vParTestInitialise();
+}
+/*----------------------------------------------------------------------------------------------------------*/
+
+void vApplicationStackOverflowHook( xTaskHandle *pxTask, signed char *pcTaskName )
+{
+ /* This function will get called if a task overflows its stack. */
+
+ ( void ) pxTask;
+ ( void ) pcTaskName;
+ for( ;; );
+}
+/*----------------------------------------------------------------------------------------------------------*/
+
+void vConfigureTimerForRunTimeStats( void ){
+ const unsigned long TCR_COUNT_RESET = 2, CTCR_CTM_TIMER = 0x00, TCR_COUNT_ENABLE = 0x01;
+
+ /* This function configures a timer that is used as the time base when collecting run time
+ * statistical information - basically the percentage of CPU time that each task is utilizing.
+ * It is called automatically when the scheduler is started
+ * (assuming configGENERATE_RUN_TIME_STATS is set to 1). */
+
+ /* Power up and feed the timer. */
+ LPC_SC->PCONP |= 0x02UL;
+ LPC_SC->PCLKSEL0 = (LPC_SC->PCLKSEL0 & (~(0x3<<2))) | (0x01 << 2);
+
+ /* Reset Timer 0 */
+ LPC_TIM0->TCR = TCR_COUNT_RESET;
+
+ /* Just count up. */
+ LPC_TIM0->CTCR = CTCR_CTM_TIMER;
+
+ /* Prescale to a frequency that is good enough to get a decent resolution,
+ but not too fast so as to overflow all the time. */
+ LPC_TIM0->PR = ( configCPU_CLOCK_HZ / 10000UL ) - 1UL;
+
+ /* Start the counter. */
+ LPC_TIM0->TCR = TCR_COUNT_ENABLE;
+}
+/*----------------------------------------------------------------------------------------------------------*/
+
diff -r 000000000000 -r d4960fcea8ff syscalls.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/syscalls.c Sat Jan 01 11:17:45 2011 +0000
@@ -0,0 +1,91 @@
+/* Don't need anything here. */
+
+#include <stdlib.h>
+#if 0
+#include <sys/stat.h>
+#else
+
+#endif
+
+//---------------------------------
+// from types.h
+typedef char * caddr_t;
+//----------------------------------
+
+int _read_r (struct _reent *r, int file, char * ptr, int len)
+{
+ ( void ) r;
+ ( void ) file;
+ ( void ) ptr;
+ ( void ) len;
+ return -1;
+}
+
+/***************************************************************************/
+
+int _lseek_r (struct _reent *r, int file, int ptr, int dir)
+{
+ ( void ) r;
+ ( void ) file;
+ ( void ) ptr;
+ ( void ) dir;
+
+ return 0;
+}
+
+/***************************************************************************/
+
+int _write_r (struct _reent *r, int file, char * ptr, int len)
+{
+ ( void ) r;
+ ( void ) file;
+ ( void ) ptr;
+ ( void ) len;
+
+ return 0;
+}
+
+/***************************************************************************/
+
+int _close_r (struct _reent *r, int file)
+{
+ ( void ) r;
+ ( void ) file;
+
+ return 0;
+}
+
+/***************************************************************************/
+
+caddr_t _sbrk_r (struct _reent *r, int incr)
+{
+ ( void ) r;
+ ( void ) incr;
+
+ return 0;
+}
+
+/***************************************************************************/
+
+int _fstat_r (struct _reent *r, int file, struct stat * st)
+{
+ ( void ) r;
+ ( void ) file;
+ ( void ) st;
+
+ return 0;
+}
+
+/***************************************************************************/
+
+int _isatty_r(struct _reent *r, int fd)
+{
+ ( void ) r;
+ ( void ) fd;
+
+ return 0;
+}
+
+
+
+