Dependents of Servo
A dependent is a program or library which makes use of this library.
Example to sweep a servo through its range helloworld, PwmOut, Servo
First program to demonstrate a working robot. crude and ugly, basicly a smoke test.
this is most recent published version of the mbed robots software, demonstrating object avoidance, and some logo based control functions.
seeing i robot - with all the file systems and complete code
Firmware for Eton breadboard
Modification in routine to select substance
The software I used to run my Sparkfun AVC 2011 entry, a 1:10 scale RC truck called \"Data Bus\". This is the final revision of the code as-run on April … avc, robomagellan
Work for University. derby, Kevin, university
Takes in serial coordinates (in mm) and moves servos in Lynxmotion AL5 arm accordingly. RoboArm
This program is porting rosserial_arduino for mbed http://www.ros.org/wiki/rosserial_arduino This program supported the revision of 169 of rosserial. This program contains an example. ROS
ライントレーサーのテストプログラムです。 コンパイルのみ 動作未チェック
It is a door opener with mbed and Felica(RFID). RFID
Code for autonomous ground vehicle, Data Bus, 3rd place winner in 2012 Sparkfun AVC. navigation, robomagellan, robot, Robotics
a simple code for elevator Elevator
This program uses the potentiometers to set the servo positions. Note that it will need additional power (6v) that can be supplied through the 1.3mm tip-positive DC conenctor application, Board, Servo
Georgia Tech ECE 4180 Final Project
ICRS Eurobot 2013 ICRS
Colour sensors calibrated
Unstable experimental version of the Mbed interface
ECE 4180 Georiga Tech - Smart House Project: mbed1 (v1)
Versao que rodou durante a competicao
OBSTACLE AVOIDING ROBOT USING ULTRASONIC SENSOR