USBMouseKeyboard
USBMouseKeyboard class hierarchy
You can use the USBMouseKeyboard interface to emulate a mouse and a keyboard at the same time over the USB port. You can send both key presses and mouse movements with this class.
USBMouseKeyboard class reference
| Public Member Functions | |
| USBMouseKeyboard (bool connect_blocking=true, MOUSE_TYPE mouse_type=REL_MOUSE, uint16_t vendor_id=0x0021, uint16_t product_id=0x0011, uint16_t product_release=0x0001) | |
| Basic constructor. More... | |
| USBMouseKeyboard (USBPhy *phy, MOUSE_TYPE mouse_type=REL_MOUSE, uint16_t vendor_id=0x0021, uint16_t product_id=0x0011, uint16_t product_release=0x0001) | |
| Fully featured constructor. More... | |
| virtual | ~USBMouseKeyboard () |
| Destroy this object. More... | |
| bool | update (int16_t x, int16_t y, uint8_t buttons, int8_t z) |
| Write a state of the mouse. More... | |
| bool | move (int16_t x, int16_t y) |
| Move the cursor to (x, y) More... | |
| bool | press (uint8_t button) |
| Press one or several buttons. More... | |
| bool | release (uint8_t button) |
| Release one or several buttons. More... | |
| bool | doubleClick () |
| Double click (MOUSE_LEFT) More... | |
| bool | click (uint8_t button) |
| Click. More... | |
| bool | scroll (int8_t z) |
| Scrolling. More... | |
| bool | key_code (uint8_t key, uint8_t modifier=0) |
| To send a character defined by a modifier(CTRL, SHIFT, ALT) and the key. More... | |
| virtual int | _putc (int c) |
| Send a character. More... | |
| bool | media_control (MEDIA_KEY key) |
| Control media keys. More... | |
| uint8_t | lock_status () |
| Read status of lock keys. More... | |
| bool | ready () |
| Check if this class is ready. More... | |
| void | wait_ready () |
| Block until this HID device is in the configured state. More... | |
| bool | send (const HID_REPORT *report) |
| Send a Report. More... | |
| bool | send_nb (const HID_REPORT *report) |
| Send a Report. More... | |
| bool | read (HID_REPORT *report) |
| Read a report: blocking. More... | |
| bool | read_nb (HID_REPORT *report) |
| Read a report: non blocking. More... | |
| void | init () |
| Initialize this instance. More... | |
| void | deinit () |
| Power down this instance. More... | |
| bool | configured () |
| Check if the device is configured. More... | |
| void | connect () |
| Connect a device This method can also be used to resume USB operation when USB power is detected after it was suspended via USBDevice::deinit. More... | |
| void | disconnect () |
| Disconnect a device. More... | |
| void | sof_enable () |
| Enable the start of frame interrupt. More... | |
| void | sof_disable () |
| Disable the start of frame interrupt. More... | |
| bool | endpoint_add (usb_ep_t endpoint, uint32_t max_packet, usb_ep_type_t type, mbed::Callback< void()> callback=NULL) |
| Add an endpoint. More... | |
| template<typename T > | |
| bool | endpoint_add (usb_ep_t endpoint, uint32_t max_packet, usb_ep_type_t type, void(T::*callback)()) |
| Add an endpoint. More... | |
| void | endpoint_remove (usb_ep_t endpoint) |
| Remove an endpoint. More... | |
| void | endpoint_remove_all () |
| Remove all non-zero endpoints. More... | |
| void | endpoint_stall (usb_ep_t endpoint) |
| Stall an endpoint. More... | |
| void | endpoint_unstall (usb_ep_t endpoint) |
| Un-stall an endpoint. More... | |
| uint32_t | endpoint_max_packet_size (usb_ep_t endpoint) |
| Get the current maximum size for this endpoint. More... | |
| void | endpoint_abort (usb_ep_t endpoint) |
| Abort the current transfer on this endpoint. More... | |
| bool | read_start (usb_ep_t endpoint, uint8_t *buffer, uint32_t size) |
| start a read on the given endpoint More... | |
| uint32_t | read_finish (usb_ep_t endpoint) |
| Get the status of a read. More... | |
| bool | write_start (usb_ep_t endpoint, uint8_t *buffer, uint32_t size) |
| Write a data to the given endpoint. More... | |
| uint32_t | write_finish (usb_ep_t endpoint) |
| Get the status of a write. More... | |
| virtual int | close () |
| Close a file. More... | |
| virtual ssize_t | write (const void *buffer, size_t length) |
| Write the contents of a buffer to a file. More... | |
| virtual ssize_t | read (void *buffer, size_t length) |
| Read the contents of a file into a buffer. More... | |
| virtual off_t | seek (off_t offset, int whence) |
| Move the file position to a given offset from from a given location. More... | |
| virtual off_t | tell () |
| Get the file position of the file. More... | |
| virtual void | rewind () |
| Rewind the file position to the beginning of the file. More... | |
| virtual int | isatty () |
| Check if the file in an interactive terminal device. More... | |
| virtual int | sync () |
| Flush any buffers associated with the file. More... | |
| virtual off_t | size () |
| Get the size of the file. More... | |
| virtual int | truncate (off_t length) |
| Truncate or extend a file. More... | |
| virtual off_t | lseek (off_t offset, int whence) |
| Move the file position to a given offset from a given location. More... | |
| virtual int | fsync () |
| Flush any buffers associated with the FileHandle, ensuring it is up to date on disk. More... | |
| virtual off_t | flen () |
| Find the length of the file. More... | |
| virtual int | set_blocking (bool blocking) |
| Set blocking or nonblocking mode of the file operation like read/write. More... | |
| virtual bool | is_blocking () const |
| Check current blocking or nonblocking mode for file operations. More... | |
| virtual int | enable_input (bool enabled) |
| Enable or disable input. More... | |
| virtual int | enable_output (bool enabled) |
| Enable or disable output. More... | |
| virtual short | poll (short events) const |
| Check for poll event flags You can use or ignore the input parameter. More... | |
| bool | writable () const |
| Definition depends on the subclass implementing FileHandle. More... | |
| bool | readable () const |
| Definition depends on the subclass implementing FileHandle. More... | |
| virtual void | sigio (Callback< void()> func) |
| Register a callback on state change of the file. More... | |
| Protected Member Functions | |
| virtual void | callback_state_change (DeviceState new_state) |
| Called when USB changes state. More... | |
| virtual void | callback_request (const setup_packet_t *setup) |
| Called by USBDevice on Endpoint0 request. More... | |
| virtual void | callback_request_xfer_done (const setup_packet_t *setup, bool aborted) |
| Called by USBDevice on data stage completion. More... | |
| virtual void | callback_power (bool powered) |
| Called by USBDevice layer on power state change. More... | |
| virtual void | callback_sof (int frame_number) |
| Called by USBDevice layer on each new USB frame. More... | |
| virtual void | callback_reset () |
| Called by USBDevice layer on bus reset. More... | |
| void | complete_request (RequestResult result, uint8_t *data=NULL, uint32_t size=0) |
| Called to complete the setup stage of a callback request. More... | |
| void | complete_request_xfer_done (bool success) |
| Called to complete the data stage of a callback request. More... | |
| void | complete_set_configuration (bool success) |
| Called to complete a set configuration command. More... | |
| void | complete_set_interface (bool success) |
| Called to complete a set interface command. More... | |
| uint8_t * | find_descriptor (uint8_t descriptor_type, uint8_t index=0) |
| Find a descriptor type inside the configuration descriptor. More... | |
| const usb_ep_table_t * | endpoint_table () |
| Get the endpoint table of this device. More... | |
| virtual void | start_process () |
| Callback called to indicate the USB processing needs to be done. More... | |
| virtual void | lock () |
| Acquire exclusive access to this instance USBDevice. More... | |
| virtual void | unlock () |
| Release exclusive access to this instance USBDevice. More... | |
| virtual void | assert_locked () |
| Assert that the current thread of execution holds the lock. More... | |
| virtual void | lock () |
| Acquire exclusive access to this object. More... | |
| virtual void | unlock () |
| Release exclusive access to this object. More... | |
USBMouseKeyboard example
//Dual mouse/keyboard device example
//Example will "type" ASCII characters to the screen, move the mouse around in a circle, and assert various media and modifier keys
#include "mbed.h"
#include "USBMouseKeyboard.h"
//LED1: NUM_LOCK
//LED2: CAPS_LOCK
//LED3: SCROLL_LOCK
BusOut leds(LED1, LED2, LED3);
//USBMouseKeyboard object
USBMouseKeyboard key_mouse;
int main(void) {
int16_t x = 0;
int16_t y = 0;
int32_t radius = 70;
int32_t angle = 0;
while (1) {
//moves the coordinates of the mouse around in a circle
x = cos((double)angle*3.14/50.0)*radius;
y = sin((double)angle*3.14/50.0)*radius;
//example of a media key press
key_mouse.media_control(KEY_VOLUME_DOWN);
//example of simple keyboard output
key_mouse.printf("Hello World from Mbed\r\n");
//function to move the mouse to coordinates "x, y"
key_mouse.move(x, y);
//example of modifier key press
key_mouse.key_code(KEY_CAPS_LOCK);
leds = key_mouse.lock_status();
wait(0.05);
key_mouse.media_control(KEY_VOLUME_UP);
key_mouse.key_code(KEY_NUM_LOCK);
leds = key_mouse.lock_status();
wait(0.05);
angle += 10;
key_mouse.key_code(KEY_SCROLL_LOCK);
leds = key_mouse.lock_status();
wait(0.05);
}
}