BLE_API
Dependents of BLE_API
A dependent is a program or library which makes use of this library.
Example to simulate photoplethysmography for heart rate and transmit via BLE
This program is given as a sample exercise. It has all the functionality to be used on a BLE Nano device and to connect to SimpleChat application for Android/ iOS …
BLE Nano,
educational,
NTC Termistor,
SCPI
+ battery and device information
Smart Button
es
BM1383, BH1745,KX122
Beacon demo for the BLE API using the nRF51822 native mode drivers
semaphore_BLE
Tema SCPI Negru Rares-Razvan
LinkNode_BMP180 by derron
LinkNode_BMP180
Prueba LoRa
Hello World program for this deprecated board, based on older versions of BLE_API (rev1130), X_NUCLEO_IDB0XA1 (rev212) and mbed (rev114) libraries.
SimpleControls works with the BLEController iOS/Android App. The mbed's pin can acts as DIGITAL_IN, DIGITAL_OUT, PWM, SERVO, ANALOG_IN. The sketch is to show you how to control the pin as …
BLE,
nRF51822,
RedBearLab
med ble switch science
SSmbed BLE only send demo
acc and mbed
It is a simple IoT solution for plant life monitoring and maintenance, based on STM32NUCLEO boards and expansion modules. This branch is the post-eSAME development branch.
BLE,
stm32,
stm32nucleo
It is a simple IoT solution for plant life monitoring and maintenance, based on STM32NUCLEO boards and expansion modules.
BLE,
stm32,
stm32nucleo
acc and mbed
Minimal working example to demonstrate I2C with SI7021 sensor
hrm1017 with gy-801 temp
hello world
LoRa物品管理ソリューション for HRM1017
BLE Nano LED control
This version includes the BMP180 pressure/temperature/altitude sensor. The adquisition of these values were done through BLE over a Rasberry Pi.
project Internet of things 2016 UPMC : based on simple controls, it sends pression and temperature from BMP180
ECG data acquisition with Analog device frontend and Redbear nano BLE
medtricsIO