BLE_API

Dependents of BLE_API

A dependent is a program or library which makes use of this library.

Last updated: 08 Mar 2017
Basic Working Code
Last updated: 17 Feb 2017
Heart Rate Monitor example for the BLE
Last updated: 20 Sep 2016
Heart Rate Monitor example for the BLE API using nRF51822 native mode drivers
Last updated: 24 Mar 2017
testing fota on nRF51 DK DK, FOTA, nrf51, test
Last updated: 28 Mar 2017
A scanner framework that receives advertisements, filters them by MAC, and prints out some data as CSV over the serial port
Last updated: 03 Apr 2017
nrf51822 LED demo
Last updated: 10 Apr 2017
hi corny n nick n kiran
Last updated: 10 Apr 2017
BLE test
Last updated: 11 Apr 2017
initial code for i2c communication with accelerometers
Last updated: 11 Apr 2017
pls pls
Last updated: 11 Mar 2017
Tell the arduino
Last updated: 12 Apr 2017
Using nRF51 as Line Beacon beacon, line
Last updated: 13 Apr 2017
i2c communication between adafruit accelerometer breakout boards to BLE nano
Last updated: 13 Apr 2017
Communication between BLE nano to raspberry pi
Last updated: 18 Apr 2017
Project aiming to do a Bluetooth Low Energy IoT devices, which measure temperature and humidity. Bluetooth achieved with the IDB05A1 shield. Temperature/humidity achieved with a DHT11 sensor. Project working, tested … BLE, bluetooth, DHT11, Humidity, l476, stm32, Temperature
Last updated: 18 Apr 2017
A template for applications where some small amount of data needs to be notified to a phone app over BLE. It is a good starting point for notifications.
Last updated: 19 Apr 2017
Send notification to pi from ble nano using ButtonService
Last updated: 23 Apr 2017
Little domotic project: Controlling RGB color's intensity of the JUMA card with an Android App. Here's the corresponding App's source code --> https://github.com/NordineKhelfi/Android_Bluetooth_Low_Energy
Last updated: 25 Apr 2017
From repo, no change
Last updated: 26 Apr 2017
code with new accelerometers
Last updated: 28 Apr 2017
Working program for data sending over BLE BLE
Last updated: 29 Apr 2017
Locator mobile version
Last updated: 29 Apr 2017
Locator beacon firmware
Last updated: 30 Apr 2017
Locator mobile firmware
Last updated: 01 May 2017
it compiles at the very least. Starter code for buffering accelerator values before sending them off.
Last updated: 02 May 2017
I2C to BLE nano with notifications to pi using original mbed os code
Last updated: 03 May 2017
AKM Development Platform. This is the D7.014 version.
Last updated: 04 May 2017
pls
Last updated: 04 May 2017
zach_thesholding
Last updated: 01 May 2017
BLE Application to open a Garage door
Last updated: 09 May 2017
Repo for th IOT course
Last updated: 10 May 2017
Refactoring and other updates
Last updated: 12 May 2017
Endring av hastighet for AC motorer med Bluetooth Changing the speed of AC motors with Bluetooth AC-motor, F401RE, motor, motor driver, Nucleo
Last updated: 12 May 2017
Start, stopp, endring av frekvens, endre retting og lese av strøm og spenning over Bluetooth. Start, stop, change frequency, change correction and read power and voltage over Bluetooth AC-motor, BLE, F401RE, motor, motor control, motor driver, Nucleo, pwm/motor
Last updated: 16 May 2017
Bluetooth enabled control of a BLDC via the Allegro MicroSystems A4960.
Last updated: 16 May 2017
Bluetooth enabled control of a BLDC via the Allegro MicroSystems A4960.
Last updated: 20 May 2017
BLE Simple Template BLEnano
Last updated: 17 Mar 2017
entire project
Last updated: 30 May 2017
First try
Last updated: 30 May 2017
Interrupt