Library to easily communicate with XBee modules.

Dependencies:   DigiLogger

Dependents:   WaterLogger XbeeGateway XBee_Cooker ProjetReceiver ... more

Use XBee radio modules to easily improve your project with wireless connectivity. You can enable entire networks of connected devices. XBees can exchange data with other modules in the network and configure remote modules as well as trigger actions or collect sensor data on XBee nodes without needing additional external microcontrollers. Using this documentation and configuration tools with XBee modules, it is easy to develop these types of applications and more.

/media/uploads/spastor/xbee-xbeepro-series1.jpg

The XBee mbed Library is a ready-to-import mbed extension that dramatically reduces development time for XBee projects on the mbed platforms. There are many modular examples, making it an easy and smooth process to add wireless networking to a whole range of useful applications.

Info

Currently 802.15.4 (Series 1 and 2), ZigBee (Series 2) and DigiMesh (Series 1 and 2) modules are supported. The libraries can be extended to support other protocols like DigiMesh point-to-point, WiFi, etc.

User manual

The user manual can be found at this project's Wiki pages:

  1. Configuring the library
  2. Debugging the library
  3. Initializing modules
  4. Resetting the local module
  5. Receiving Data from other module
  6. Sending data to another module
  7. Discovering nodes in the network
  8. Configuring local and remote modules
  9. Handling modem status changes
  10. Handling remote modules DIOs, ADCs and PWMs
  11. Handling IO Data Samples from other module
  12. Radio Power Management

Ready to use examples

There are a lot of ready to use examples to get started quickly.
Make sure you have a valid example setup before running the examples:

Examples for ZigBee modules

Import programXBeeZB_Receive_Data

ZigBee Receive Data example for mbed XBeeLib By Digi

Import programXBeeZB_Send_Data

ZigBee Send Data example for mbed XBeeLib By Digi

Import programXBeeZB_module_config

ZigBee network configuration example for mbed XBeeLib By Digi

Import programXBeeZB_AT_Commands

ZigBee AT Commands example for mbed XBeeLib By Digi

Import programXBeeZB_dio_adc

ZigBee DIOs and ADCs example for mbed XBeeLib By Digi

Import programXBeeZB_IO_Sample_Callback

ZigBee IO Sampling Callback example for mbed XBeeLib By Digi

Import programXBeeZB_modem_status

ZigBee Modem Status example for mbed XBeeLib By Digi

Import programXBeeZB_node_discovery

ZigBee Node Discovery example for mbed XBeeLib By Digi

Import programXBeeZB_power_mngmnt_cyclic_sleep

ZigBee Power Management using Cyclic Sleep example for mbed XBeeLib By Digi

Import programXBeeZB_power_mngmnt_pin_sleep

ZigBee Power Management using Pin Sleep example for mbed XBeeLib By Digi

Examples for 802.15.4 modules

Import programXBee802_Receive_Data

802.15.4 Receive Data example for mbed XBeeLib By Digi

Import programXBee802_Send_Data

802.15.4 Send Data example for mbed XBeeLib By Digi

Import programXBee802_module_config

802.15.4 network configuration example for mbed XBeeLib By Digi

Import programXBee802_AT_Commands

802.15.4 AT Commands example for mbed XBeeLib By Digi

Import programXBee802_dio_adc_pwm

802.15.4 DIOs, ADCs and PWM example for mbed XBeeLib By Digi

Import programXBee802_IO_Sample_Callback

802.15.4 IO Sampling Callback example for mbed XBeeLib By Digi

Import programXBee802_node_discovery

802.15.4 Node Discovery example for mbed XBeeLib By Digi

Import programXBee802_power_mngmnt_cyclic_sleep

802.15.4 Power Management using Cyclic Sleep example for mbed XBeeLib By Digi

Import programXBee802_power_mngmnt_pin_sleep

802.15.4 Power Management using Pin Sleep example for mbed XBeeLib By Digi

Examples for DigiMesh modules

Import programXBeeDM_Receive_Data

DigiMesh Receive Data example for mbed XBeeLib By Digi

Import programXBeeDM_Send_Data

DigiMesh Send Data example for mbed XBeeLib By Digi

Import programXBeeDM_module_config

DigiMesh network configuration example for mbed XBeeLib By Digi

Import programXBeeDM_AT_Commands

DigiMesh AT Commands example for mbed XBeeLib By Digi

Import programXBeeDM_dio_adc_pwm

DigiMEsh DIOs, ADCs and PWMs example for mbed XBeeLib By Digi

Import programXBeeDM_IO_Sample_Callback

DigiMesh IO Sampling Callback example for mbed XBeeLib By Digi

Import programXBeeDM_modem_status

DigiMesh Modem Status example for mbed XBeeLib By Digi

Import programXBeeDM_node_discovery

DigiMesh Node Discovery example for mbed XBeeLib By Digi

Import programXBeeDM_power_mngmnt_asyncr_cyclic_sleep

DigiMesh Power Management using Asynchronous Cyclic Sleep example for mbed XBeeLib By Digi

Import programXBeeDM_power_mngmnt_pin_sleep

DigiMesh Power Management using Pin Sleep example for mbed XBeeLib By Digi

IO/IOSample802.h

Committer:
spastor
Date:
2015-06-01
Revision:
4:629712865107
Parent:
3:8662ebe83570

File content as of revision 4:629712865107:

/**
 * Copyright (c) 2015 Digi International Inc.,
 * All rights not expressly granted are reserved.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this file,
 * You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * Digi International Inc. 11001 Bren Road East, Minnetonka, MN 55343
 * =======================================================================
 */

#ifndef _IO_IOSAMPLE802_H_
#define _IO_IOSAMPLE802_H_

#define MAX_IO_SAMPLE_802_LEN   (2 + 2 * 6)

namespace XBeeLib {

/** Class to handle the incoming IO Data Samples in 802.15.4 modules */
class IOSample802 {
    public:
        /** Class constructor
         *  @param raw_data The IO Sample data, as returned by an "IS" command response or in the Io16Bit (0x83) or Io64Bit (0x82) frames
         *  @param size size (in bytes) of raw_data
         */
        IOSample802(const uint8_t* const raw_data = NULL, size_t size = 0);

        /** Class destructor */
        ~IOSample802();

        /** get_dio - read the value of a DIO configured as digital input
         *
         *  @param line DIO line being read
         *  @param val pointer where the DIO value read will be stored
         *  @returns
         *     Success if the operation was successful,
         *     Failure otherwise
         */
        RadioStatus get_dio(XBee802::IoLine line, DioVal* const dio_value) const;

        /** get_adc - read the value of the espcified ADC line
         *
         *  @param line ADC line being read
         *  @param val pointer where the value read from the ADC will be stored
         *  @returns
         *     Success if the operation was successful,
         *     Failure otherwise
         */
        RadioStatus get_adc(XBee802::IoLine line, uint16_t* const val) const;

        /** is_valid - checks if the IOSample802 object has at least one DIO or ADC sample.
         *  @returns true if valid, false otherwise
         */
        inline bool is_valid()
        {
            return _channel_mask != 0;
        }

    protected:
        uint16_t _channel_mask;
        uint8_t _sampled_data[MAX_IO_SAMPLE_802_LEN];
        uint8_t _sampled_data_size;

        inline bool dio_channels_present(void) const;
        inline uint8_t get_dio_channels(void) const;
};

}   /* namespace XBeeLib */

#endif /* _IO_IOSAMPLE802_H_ */