You are viewing an older revision! See the latest version

RS Audio Codec

Table of Contents

  1. Hello World!
  2. Hardware
  3. Other info

The audio codec board mounted on the RS Animatronic Lab Board

This page provides information and some examples for the use of the RS Audio Codec sub board, based on TI's TLV320 chip. This chip provides a high quality audio link out and in to the mbed with IO including: an amplified stereo headphone out, an stereo line out, a stereo line in and an pre-amped mono microphone input. Such a capable chip opens up a lot of options for high quality audio on mbed.

One can get this AudioCODEC board from RS Part number 754-1974

Hello World!

Using the WAVPlayer test exmaple, here are two example WAVs that the program will read from USB drive

Import program
WavPlayer_test - main.cpp

00001 // This is all set up for the RS Labboard: Just plug a memory stick with a wav file called test.wav on it 
00002 //(such as the one you can get from: https://mbed.org/media/uploads/p07gbar/test.wav) and have a listen!
00003 // Any 16bit PCM Wav files with channel*sample rate less than 48kHz should work.
00004 
00005 #include "mbed.h"
00006 #include "WavPlayer.h"
00007 #include "MSCFileSystem.h"
00008 
00009 MSCFileSystem msc("msc"); // Mount flash drive under the name "msc"
00010 WavPlayer player;
00011 
00012 int main() {
00013     FILE *fp = fopen("/msc/test.wav", "r");  // Open "out.txt" on the local file system for writing
00014     player.open(&fp);
00015     player.play();
00016     fclose(fp);
00017 }

Hardware

The AudioCODEC board has an accompanying lab board AnimatronicLab :

/media/uploads/p07gbar/animatronics_labboard_audio_set_up.png

If using a breadboard, the wiring is :

AudioCODECmbed NXP LPC1768
+3.3vVout
SCLKp10
SDINp9
MODEGND
nCSGND
LRCINp5
DINp6
BCLKp7
DOUTp8
LRCOUTp29
GNDGND

This program doesn't need a flash drive or any files:

Import programTLV320_Write_test

A test program for the TLV320, Generates some sine waves.

Last commit 19 Sep 2012 by Giles Barton-Owen

Other info

Both programs use the TLV320 library and the I2S library:

Import libraryI2S

A well tested I2S library where the send and recieve parts are seperate instances.

Last commit 19 Sep 2012 by Giles Barton-Owen

Import libraryTLV320

A fairly well tested TLV320 library for I2C configuration and control of the TI TLV320 part

Last commit 25 Sep 2012 by Giles Barton-Owen

A WAV library was written to make the process of playing wave files easier:

Import library
WavPlayer - WavPlayer Class Reference

Public Member Functions

WavPlayer ()
Create a WavPlayer instance.
WavPlayer (FILE **fpp)
Create a WavPlayer instance.
void open (FILE **fpp)
Set the file to read out of.
int getConfig ()
Extract the header infomation, automatically called by open.
float play ()
Play the entire file.
float play (float time)
Play the file for a certain number of seconds.
float play (float start, float timefor)
Play the file for a certain number of seconds, from a certain start point.
All wikipages