FreescaleIAP

Dependents of FreescaleIAP

A dependent is a program or library which makes use of this library.

5 15
App to configure a DDS (AD9854) using a K64F. USB an Ethernet were used as interface. EPROM, Everything, first, implemented, is, not, release:, very, was, well., working
20 1
070914
5 20
RDA5807M FM RDS radio program using 4DSystems 32028 Oled touch screen display. Search and direct frequency selection, RDS text, 10 preset memories Radio, RDA5807M, RDS
4 3
registry flash read/ write
3 0
17 2
23 0
Version für den BSW Nottaster - OUT1 BSW
22 6
Update vom 10.05.15
1 3
Flysky rc receiver with ppm output. made with KL05Z uc with internal clk (modified mbed lib)
1 5
2 1
73 0
73 0
Changes: bbram Checking Function Registers Checking Funcrtion Indivisual Register checking Functions ADF7023, IITMSAT
2 1
3 1
5 1
things are working
10 0
To be debugged
2 18
flash codes for reading or writing 20 bytes into the last sector of the flash area
136 1
Hi Shubham I am just using this to test PYLD code
138 0
7 1
Firmware for the controller of the JRO Radar Controller.
139 1
12 8
Updated PWM working; Entering nominal mode
140 2
141 0
14 13
PWM and ALGO updated.. PWM getting generated
15 4
PWM and ALGO updated.. PWM getting generated
139 1
14 3
I2C working only once, sensor working well, commissioning updated to be tested, Wohoooo!!! :-D
16 6
Changes to be made for ATS_Fault logic and ACS_State
17 2
ACS data acq changed completely. Tested and working. Deals all faults.
1 7
19 2
ACS completed fully. All cases to be tested
36 0
18 2
Updated EPS code with flowchart v2.3 (CDMS and HW faults)
20 2
FINAL ACS TO BE USED FOR TESTING. COMMISSIONING, ACS MAIN, DATA ACQ ALL DONE. ACS
192 2
20 1
I2C BAE standalone hardware testing
161 1
cdms_i2c_hardware_test
267 0
Compression code changed and RLY_TMTC pointers managed