Jim Flynn / easy-connect

Added support for WNC M14A2A Cellular LTE Data Module.

Dependencies:   WNC14A2AInterface

Dependents:   http-example-wnc http-example-wnc-modified

Embed: (wiki syntax)

« Back to documentation index

File Index

File List

Here is a list of all documented files with brief descriptions:
at24mac.cpp [code]
at24mac.h [code]
AT86RFReg.h [code]
ATParser.cpp [code]
ATParser.h [code]
BufferedPrint.c [code]
BufferedSerial.cpp [code]Software Buffer - Extends mbed Serial functionallity adding irq driven TX and RX
BufferedSerial.h [code]Software Buffer - Extends mbed Serial functionallity adding irq driven TX and RX
contiki-conf.h [code]
easy-connect.h [code]
ESP8266.cpp [code]
ESP8266.h [code]
ESP8266Interface.cpp [code]
ESP8266Interface.h [code]
hw-config.h [code]Header file for Hardware Configuration & Setup
ip64-conf.h [code]
MCR20Drv.c [code]
MCR20Drv.h [code]
MCR20Overwrites.h [code]
MCR20Reg.h [code]
MCU_Interface.h [code]Header file for low level SPIRIT SPI driver
MyBuffer.cpp [code]
MyBuffer.h [code]
NanostackRfPhyAtmel.cpp [code]
NanostackRfPhyAtmel.h [code]
NanostackRfPhyMcr20a.cpp [code]
NanostackRfPhyMcr20a.h [code]
NanostackRfPhySpirit1.cpp [code]
NanostackRfPhySpirit1.h [code]
platform-conf.h [code]Header file for the stm32nucleo-spirit1 platform configuration
radio.h [code]Header file for the radio API
radio_gpio.h [code]This file contains all the functions prototypes for the gpio
radio_shield_config.h [code]This file contains definitions for:

  • LEDs and push-button available on RF shields
radio_spi.cpp [code]
radio_spi.h [code]This file contains all the functions prototypes for SPI
SimpleSpirit1.cpp [code]
SimpleSpirit1.h [code]
spirit1-config.h [code]
spirit1-const.h [code]
spirit1.h [code]
SPIRIT_Aes.c [code]Configuration and management of SPIRIT AES Engine
SPIRIT_Aes.h [code]Configuration and management of SPIRIT AES Engine
SPIRIT_Calibration.c [code]Configuration and management of SPIRIT VCO-RCO calibration
SPIRIT_Calibration.h [code]Configuration and management of SPIRIT VCO-RCO calibration
SPIRIT_Commands.c [code]Management of SPIRIT Commands
SPIRIT_Commands.h [code]Management of SPIRIT Commands
SPIRIT_Config.h [code]Spirit Configuration and useful defines
SPIRIT_Csma.c [code]Configuration and management of SPIRIT CSMA
SPIRIT_Csma.h [code]Configuration and management of SPIRIT CSMA
SPIRIT_DirectRF.c [code]Configuration and management of SPIRIT direct transmission / receive modes
SPIRIT_DirectRF.h [code]Configuration and management of SPIRIT direct transmission / receive modes
SPIRIT_General.c [code]Configuration and management of SPIRIT General functionalities
SPIRIT_General.h [code]Configuration and management of SPIRIT General functionalities
SPIRIT_Gpio.c [code]This file provides all the low level API to manage SPIRIT GPIO
SPIRIT_Gpio.h [code]This file provides all the low level API to manage SPIRIT GPIO
SPIRIT_Irq.c [code]Configuration and management of SPIRIT IRQs
SPIRIT_Irq.h [code]Configuration and management of SPIRIT IRQs
SPIRIT_LinearFifo.c [code]Configuration and management of SPIRIT Fifo
SPIRIT_LinearFifo.h [code]Configuration and management of SPIRIT Fifo
SPIRIT_Management.c [code]The management layer for SPIRIT1 library
SPIRIT_Management.h [code]The management layer for SPIRIT1 library
SPIRIT_PktBasic.c [code]Configuration and management of SPIRIT Basic packets
SPIRIT_PktBasic.h [code]Configuration and management of SPIRIT Basic packets
SPIRIT_PktCommon.c [code]Configuration and management of the common features of SPIRIT packets
SPIRIT_PktCommon.h [code]Configuration and management of the common features of SPIRIT packets
SPIRIT_PktMbus.c [code]Configuration and management of SPIRIT MBUS packets
SPIRIT_PktMbus.h [code]Configuration and management of SPIRIT MBUS packets
SPIRIT_PktStack.c [code]Configuration and management of SPIRIT STack packets
SPIRIT_PktStack.h [code]Configuration and management of SPIRIT STack packets
SPIRIT_Qi.c [code]Configuration and management of SPIRIT QI
SPIRIT_Qi.h [code]Configuration and management of SPIRIT QI
SPIRIT_Radio.c [code]This file provides all the low level API to manage Analog and Digital radio part of SPIRIT
SPIRIT_Radio.h [code]This file provides all the low level API to manage Analog and Digital radio part of SPIRIT
SPIRIT_Regs.h [code]This file contains all the SPIRIT registers address and masks
SPIRIT_Timer.c [code]Configuration and management of SPIRIT timers
SPIRIT_Timer.h [code]Configuration and management of SPIRIT timers
SPIRIT_Types.c [code]File for SPIRIT types
SPIRIT_Types.h [code]Header file for SPIRIT types
stm32l-spirit1-config.h [code]Evaluation board specific configuration file
XcvrSpi.h [code]
Generated on Tue Jul 12 2022 17:40:27 by  doxygen 1.7.2