Library to easily communicate with XBee modules.

Dependencies:   DigiLogger

Dependents:   WaterLogger XbeeGateway XBee_Cooker ProjetReceiver ... more

Use XBee radio modules to easily improve your project with wireless connectivity. You can enable entire networks of connected devices. XBees can exchange data with other modules in the network and configure remote modules as well as trigger actions or collect sensor data on XBee nodes without needing additional external microcontrollers. Using this documentation and configuration tools with XBee modules, it is easy to develop these types of applications and more.

/media/uploads/spastor/xbee-xbeepro-series1.jpg

The XBee mbed Library is a ready-to-import mbed extension that dramatically reduces development time for XBee projects on the mbed platforms. There are many modular examples, making it an easy and smooth process to add wireless networking to a whole range of useful applications.

Info

Currently 802.15.4 (Series 1 and 2), ZigBee (Series 2) and DigiMesh (Series 1 and 2) modules are supported. The libraries can be extended to support other protocols like DigiMesh point-to-point, WiFi, etc.

User manual

The user manual can be found at this project's Wiki pages:

  1. Configuring the library
  2. Debugging the library
  3. Initializing modules
  4. Resetting the local module
  5. Receiving Data from other module
  6. Sending data to another module
  7. Discovering nodes in the network
  8. Configuring local and remote modules
  9. Handling modem status changes
  10. Handling remote modules DIOs, ADCs and PWMs
  11. Handling IO Data Samples from other module
  12. Radio Power Management

Ready to use examples

There are a lot of ready to use examples to get started quickly.
Make sure you have a valid example setup before running the examples:

Examples for ZigBee modules

Import programXBeeZB_Receive_Data

ZigBee Receive Data example for mbed XBeeLib By Digi

Import programXBeeZB_Send_Data

ZigBee Send Data example for mbed XBeeLib By Digi

Import programXBeeZB_module_config

ZigBee network configuration example for mbed XBeeLib By Digi

Import programXBeeZB_AT_Commands

ZigBee AT Commands example for mbed XBeeLib By Digi

Import programXBeeZB_dio_adc

ZigBee DIOs and ADCs example for mbed XBeeLib By Digi

Import programXBeeZB_IO_Sample_Callback

ZigBee IO Sampling Callback example for mbed XBeeLib By Digi

Import programXBeeZB_modem_status

ZigBee Modem Status example for mbed XBeeLib By Digi

Import programXBeeZB_node_discovery

ZigBee Node Discovery example for mbed XBeeLib By Digi

Import programXBeeZB_power_mngmnt_cyclic_sleep

ZigBee Power Management using Cyclic Sleep example for mbed XBeeLib By Digi

Import programXBeeZB_power_mngmnt_pin_sleep

ZigBee Power Management using Pin Sleep example for mbed XBeeLib By Digi

Examples for 802.15.4 modules

Import programXBee802_Receive_Data

802.15.4 Receive Data example for mbed XBeeLib By Digi

Import programXBee802_Send_Data

802.15.4 Send Data example for mbed XBeeLib By Digi

Import programXBee802_module_config

802.15.4 network configuration example for mbed XBeeLib By Digi

Import programXBee802_AT_Commands

802.15.4 AT Commands example for mbed XBeeLib By Digi

Import programXBee802_dio_adc_pwm

802.15.4 DIOs, ADCs and PWM example for mbed XBeeLib By Digi

Import programXBee802_IO_Sample_Callback

802.15.4 IO Sampling Callback example for mbed XBeeLib By Digi

Import programXBee802_node_discovery

802.15.4 Node Discovery example for mbed XBeeLib By Digi

Import programXBee802_power_mngmnt_cyclic_sleep

802.15.4 Power Management using Cyclic Sleep example for mbed XBeeLib By Digi

Import programXBee802_power_mngmnt_pin_sleep

802.15.4 Power Management using Pin Sleep example for mbed XBeeLib By Digi

Examples for DigiMesh modules

Import programXBeeDM_Receive_Data

DigiMesh Receive Data example for mbed XBeeLib By Digi

Import programXBeeDM_Send_Data

DigiMesh Send Data example for mbed XBeeLib By Digi

Import programXBeeDM_module_config

DigiMesh network configuration example for mbed XBeeLib By Digi

Import programXBeeDM_AT_Commands

DigiMesh AT Commands example for mbed XBeeLib By Digi

Import programXBeeDM_dio_adc_pwm

DigiMEsh DIOs, ADCs and PWMs example for mbed XBeeLib By Digi

Import programXBeeDM_IO_Sample_Callback

DigiMesh IO Sampling Callback example for mbed XBeeLib By Digi

Import programXBeeDM_modem_status

DigiMesh Modem Status example for mbed XBeeLib By Digi

Import programXBeeDM_node_discovery

DigiMesh Node Discovery example for mbed XBeeLib By Digi

Import programXBeeDM_power_mngmnt_asyncr_cyclic_sleep

DigiMesh Power Management using Asynchronous Cyclic Sleep example for mbed XBeeLib By Digi

Import programXBeeDM_power_mngmnt_pin_sleep

DigiMesh Power Management using Pin Sleep example for mbed XBeeLib By Digi

Frames/AtCmdFrame.h

Committer:
hbujanda
Date:
2016-07-29
Revision:
9:780db84ce891
Parent:
4:629712865107

File content as of revision 9:780db84ce891:

/**
 * Copyright (c) 2015 Digi International Inc.,
 * All rights not expressly granted are reserved.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this file,
 * You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * Digi International Inc. 11001 Bren Road East, Minnetonka, MN 55343
 * =======================================================================
 */

#if !defined(__AT_CMD_FRAME_H_)
#define __AT_CMD_FRAME_H_

#include "ApiFrame.h"

#define REM_AT_CMD_RESP_FRM_ID_OFFSET   0
#define REM_AT_CMD_RESP_STATUS_OFFSET   13
#define REM_AT_CMD_RESP_CMD_DATA_OFFSET 14
#define REM_AT_CMD_RESP_OVERHEAD        14 /* ID + ADDR64 + ADDR16 + CMD + status */

#define ATCMD_RESP_FRAME_ID_OFFSET      0
#define ATCMD_RESP_CMD_LOW_OFFSET       1
#define ATCMD_RESP_CMD_HIGH_OFFSET      2
#define ATCMD_RESP_STATUS_OFFSET        3
#define ATCMD_RESP_DATA_OFFSET          4
#define ATCMD_RESP_NW_ADDR_H_OFFSET     4
#define ATCMD_RESP_NW_ADDR_L_OFFSET     5
#define ATCMD_RESP_SH_ADDR_L_OFFSET     6
#define ATCMD_RESP_SH_ADDR_H_OFFSET     10
#define ATCMD_RESP_NI_OFFSET            14

#define ATCMD_RESP_OVERHEAD             4 /* ID + CMD + status */

#define ATCMD_802_RESP_SIGN_STR_OFFSET  14
#define ATCMD_802_RESP_NI_OFFSET        15

#define MAX_NI_PARAM_LEN                20

/** Class for the AT command api frames. Derived from ApiFrame */
class AtCmdFrame : public ApiFrame
{
    public:

        /**
         * AtCmdResp
         */
        enum AtCmdResp {
            AtCmdRespOk             = 0,     /**< Ok */
            AtCmdRespError          = 1,     /**< Error */
            AtCmdRespInvalidCmd     = 2,     /**< Invalid Command */
            AtCmdRespInvalidParam   = 3,     /**< Invalid Parameter */
            AtCmdRespTxFailure      = 4,     /**< Tx Failure */
            AtCmdRespLenMismatch    = 0xfd,  /**< Length Mismatch (Error generated by the library) */
            AtCmdRespInvalidAddr    = 0xfe,  /**< Invalid Address (Error generated by the library) */
            AtCmdRespTimeout        = 0xff,   /**< Timeout (Error generated by the library) */
        };

        /**
         * ModemStatus
         */
        enum ModemStatus {
            HwReset         = 0,     /**< Hardware reset */
            WdReset         = 1,     /**< Watchdog timer reset */
            JoinedNW        = 2,     /**< Joined network (routers and end devices) */
            Disassociated   = 3,     /**< Disassociated */
            SyncLost        = 4,     /**< Synchronization Lost */
            CoordRealign    = 5,     /**< Coordinator realignment */
            CoordStarted    = 6,     /**< Coordinator started */
            NwSecKeyUpdated = 7,     /**< Network security key was updated */
            NwWokeUp        = 0x0B,  /**< NwWokeUp */
            NwToSleep       = 0x0C,  /**< NwToSleep */
            VccExceeded     = 0x0D,  /**< VccExceeded: PRO S2B only? */
            ModConfChangeJoinInProg = 0x11, /**< Modem configuration changed while join in progress */
        };

        /** Class constructor
         *
         * @param cmd at command of the frame
         * @param cmd_param command parameter
         * @param param_len length of the command param
         */
        AtCmdFrame(const char * const cmd, const uint32_t cmd_param);

        /** Class constructor
         *
         * @param cmd at command of the frame
         * @param cmd_param pointer to command parameter
         * @param param_len length of the command param
         */
        AtCmdFrame(const char * const cmd, const uint8_t * cmd_param = NULL, uint16_t param_len = 0);

        /** Class constructor
         *
         * @param remote 64 bit address of the remote device where we want to run the command
         * @param cmd at command of the frame
         * @param cmd_param command parameter
         */
        AtCmdFrame(uint64_t remote, const char * const cmd, uint32_t cmd_param);

        /** Class constructor
         *
         * @param remote 64 bit address of the remote device where we want to run the command
         * @param cmd at command of the frame
         * @param cmd_param pointer to command parameter
         * @param param_len length of the command param
         */
        AtCmdFrame(uint64_t remote, const char * const cmd, const uint8_t * cmd_param = NULL, uint16_t param_len = 0);

        /** Class constructor
         *
         * @param remote 16 bit address of the remote device where we want to run the command
         * @param cmd at command of the frame
         * @param cmd_param command parameter
         */
        AtCmdFrame(uint16_t remote, const char * const cmd, uint32_t cmd_param);

        /** Class constructor
         *
         * @param remote 16 bit address of the remote device where we want to run the command
         * @param cmd at command of the frame
         * @param cmd_param pointer to command parameter
         * @param param_len length of the command param
         */
        AtCmdFrame(uint16_t remote, const char * const cmd, const uint8_t * cmd_param = NULL, uint16_t param_len = 0);

        /** Class constructor
         *
         * @param remote 64 bit address of the remote device where we want to run the command
         * @param remote 16 bit address of the remote device where we want to run the command
         * @param cmd at command of the frame
         * @param cmd_param command parameter
         */
        AtCmdFrame(uint64_t remote64, uint16_t remote16, const char * const cmd, uint32_t cmd_param);

        /** Class constructor
         *
         * @param remote 64 bit address of the remote device where we want to run the command
         * @param remote 16 bit address of the remote device where we want to run the command
         * @param cmd at command of the frame
         * @param cmd_param pointer to command parameter
         * @param param_len length of the command param
         */
        AtCmdFrame(uint64_t remote64, uint16_t remote16, const char * const cmd, const uint8_t * cmd_param = NULL, uint16_t param_len = 0);

    protected:
        /** build_at_cmd_frame method used by the constructors to create the at command frame
         *
         * @param cmd at command of the frame
         * @param cmd_params pointer to command parameter
         * @param param_len length of the command param
         */
        void build_at_cmd_frame(const char *cmd, const uint8_t *cmd_params, uint8_t payload_len, bool reverse = true);

        /** build_at_cmd_remote_frame method used by the constructors to create the at command frame
         *
         * @param remote64 64 bit address of the remote device where we want to run the command
         * @param remote16 16 bit address of the remote device where we want to run the command
         * @param cmd at command of the frame
         * @param cmd_params pointer to command parameter
         * @param param_len length of the command param
         */
        void build_at_cmd_remote_frame(uint64_t remote64, uint16_t remote16,
                const char *const cmd, const uint8_t *const cmd_params, uint8_t payload_len, bool reverse = true);
};

#endif /* __AT_CMD_FRAME_H_ */