C__ac_buffer | |
C__ac_buffer_builder | |
C__ac_istream | |
C__ac_ostream | |
C__QCBORDecodeNesting | |
C__QCBORTrackNesting | |
C_ARM_DRIVER_STORAGE | This is the set of operations constituting the Storage driver |
C_ARM_DRIVER_VERSION | Driver Version |
C_ARM_STORAGE_BLOCK | A storage block is a range of memory with uniform attributes |
C_ARM_STORAGE_BLOCK_ATTRIBUTES | Attributes of the storage range within a storage block |
C_ARM_STORAGE_CAPABILITIES | Storage Driver API Capabilities |
C_ARM_STORAGE_INFO | Storage information |
C_ARM_STORAGE_SECURITY_FEATURES | Device Data Security Protection Features |
C_ARM_STORAGE_STATUS | Operating status of the storage controller |
C_CFG_HDR_TYPE_ | |
C_mbed_error_ctx | Mbed_error_ctx struct |
C_MEM_INFO_DESC_ | Memory Information |
C_MEM_REGION_ | |
C_MISCELLANEOUS_INFO_DESC_ | |
C_MISCELLANEOUS_INFO_HDR_ | System Miscellaneous Information |
C_QCBORDecodeContext | |
C_QCBOREncodeContext | |
C_QCBORItem | QCBORItem holds the type, value and other info for a decoded item returned by GetNextItem() |
C_SOC_PER_INFO_DESC_ | |
C_SOC_PER_INFO_NUM_ | |
C_TARGET_CFG_HDR_ | Target Configuration Header |
C_Unity | |
Caddr_table_t | |
CAddress_t | BLE address representation |
CAddressType | Container for the enumeration of BLE address types |
Cadr_req_params_t | This structure contains parameters for ADR request coming from network server |
Cadv_data_flags_t | Set of advertising flags |
CGap::AdvertisementCallbackParams_t | Representation of a scanned advertising packet |
Cadvertising_event_t | Properties of an advertising event |
CAdvertisingDataBuilder | Build advertising data |
CAdvertisingDataParser | Parse and iterate over advertising data |
CAdvertisingDataSimpleBuilder< DataSize > | Build advertising data |
CAdvertisingEndEvent | Event produced when advertising ends |
CAdvertisingParameters | Parameters defining the advertising process |
CAdvertisingReportEvent | Event generated when an advertising packet is seen during passive scanning or a scan response is received during active scanning |
CAllArgs< B0, B1, B2, B3, B4, B5 > | |
CAllArgs< B0 > | |
CAllArgs< B0, B1 > | |
CAllArgs< B0, B1, B2 > | |
CAllArgs< B0, B1, B2, B3 > | |
CAllArgs< B0, B1, B2, B3, B4 > | |
CAllArgs< mbed::Callback< R()> > | |
CAllArgs< mbed::Callback< R(A0)>, A0 > | |
CAllArgs< mbed::Callback< R(A0, A1)>, A0, A1 > | |
CAnalogIn | An analog input, used for reading the voltage on a pin |
CAnaloginMaps | |
CAnalogOut | An analog output, used for setting the voltage on a pin |
CAnalogoutMaps | |
Cargs_t | Flash algo argument structure Contains all registers that should be preserved |
►CAT_CellularBase | Class AT_CellularBase |
CAT_CellularContext | |
CAT_CellularInformation | Class AT_CellularInformation |
CAT_CellularNetwork | Class AT_CellularNetwork |
CAT_CellularStack | Class AT_CellularStack |
CAT_ControlPlane_netif | |
CATHandler | Class for sending AT commands and parsing AT responses |
Cattest_token_ctx | The context for creating an attestation token |
Cattribute_handle_range_t | Inclusive range of GATT attributes handles |
Cband_t | Default user application maximum data size for transmission |
►Cbase | Base class of all SafeBool instances |
CSafeBool< T > | Safe conversion of objects in boolean context |
►CSafeBool< CallChainOfFunctionPointersWithContext< const ConnectionCallbackParams_t * > > | |
CCallChainOfFunctionPointersWithContext< const ConnectionCallbackParams_t * > | |
►CSafeBool< CallChainOfFunctionPointersWithContext< const DisconnectionCallbackParams_t * > > | |
CCallChainOfFunctionPointersWithContext< const DisconnectionCallbackParams_t * > | |
►CSafeBool< CallChainOfFunctionPointersWithContext< const GattClient * > > | |
CCallChainOfFunctionPointersWithContext< const GattClient * > | |
►CSafeBool< CallChainOfFunctionPointersWithContext< const GattHVXCallbackParams * > > | |
CCallChainOfFunctionPointersWithContext< const GattHVXCallbackParams * > | |
►CSafeBool< CallChainOfFunctionPointersWithContext< const GattReadCallbackParams * > > | |
CCallChainOfFunctionPointersWithContext< const GattReadCallbackParams * > | |
►CSafeBool< CallChainOfFunctionPointersWithContext< const GattServer * > > | |
CCallChainOfFunctionPointersWithContext< const GattServer * > | |
►CSafeBool< CallChainOfFunctionPointersWithContext< const GattWriteCallbackParams * > > | |
CCallChainOfFunctionPointersWithContext< const GattWriteCallbackParams * > | |
►CSafeBool< CallChainOfFunctionPointersWithContext< const LegacyGap * > > | |
CCallChainOfFunctionPointersWithContext< const LegacyGap * > | |
►CSafeBool< CallChainOfFunctionPointersWithContext< const SecurityManager * > > | |
CCallChainOfFunctionPointersWithContext< const SecurityManager * > | |
►CSafeBool< CallChainOfFunctionPointersWithContext< ContextType > > | |
CCallChainOfFunctionPointersWithContext< ContextType > | Function like object hosting a list of FunctionPointerWithContext |
►CSafeBool< CallChainOfFunctionPointersWithContext< TimeoutSource_t > > | |
CCallChainOfFunctionPointersWithContext< TimeoutSource_t > | |
►CSafeBool< CallChainOfFunctionPointersWithContext< unsigned > > | |
CCallChainOfFunctionPointersWithContext< unsigned > | |
►CSafeBool< FunctionPointerWithContext< bool > > | |
CFunctionPointerWithContext< bool > | |
►CSafeBool< FunctionPointerWithContext< const AdvertisementCallbackParams_t * > > | |
CFunctionPointerWithContext< const AdvertisementCallbackParams_t * > | |
►CSafeBool< FunctionPointerWithContext< const ConnectionCallbackParams_t * > > | |
CFunctionPointerWithContext< const ConnectionCallbackParams_t * > | |
►CSafeBool< FunctionPointerWithContext< const DisconnectionCallbackParams_t * > > | |
CFunctionPointerWithContext< const DisconnectionCallbackParams_t * > | |
►CSafeBool< FunctionPointerWithContext< const DiscoveredCharacteristic * > > | |
CFunctionPointerWithContext< const DiscoveredCharacteristic * > | |
►CSafeBool< FunctionPointerWithContext< const DiscoveredService * > > | |
CFunctionPointerWithContext< const DiscoveredService * > | |
►CSafeBool< FunctionPointerWithContext< const GattClient * > > | |
CFunctionPointerWithContext< const GattClient * > | |
►CSafeBool< FunctionPointerWithContext< const GattHVXCallbackParams * > > | |
CFunctionPointerWithContext< const GattHVXCallbackParams * > | |
►CSafeBool< FunctionPointerWithContext< const GattReadCallbackParams * > > | |
CFunctionPointerWithContext< const GattReadCallbackParams * > | |
►CSafeBool< FunctionPointerWithContext< const GattServer * > > | |
CFunctionPointerWithContext< const GattServer * > | |
►CSafeBool< FunctionPointerWithContext< const GattWriteCallbackParams * > > | |
CFunctionPointerWithContext< const GattWriteCallbackParams * > | |
►CSafeBool< FunctionPointerWithContext< const LegacyGap * > > | |
CFunctionPointerWithContext< const LegacyGap * > | |
►CSafeBool< FunctionPointerWithContext< const SecurityManager * > > | |
CFunctionPointerWithContext< const SecurityManager * > | |
►CSafeBool< FunctionPointerWithContext< ContextType > > | |
CFunctionPointerWithContext< ContextType > | Function like object adapter over freestanding and member functions |
►CSafeBool< FunctionPointerWithContext< GattAttribute::Handle_t > > | |
CFunctionPointerWithContext< GattAttribute::Handle_t > | |
►CSafeBool< FunctionPointerWithContext< GattReadAuthCallbackParams * > > | |
CFunctionPointerWithContext< GattReadAuthCallbackParams * > | |
►CSafeBool< FunctionPointerWithContext< GattWriteAuthCallbackParams * > > | |
CFunctionPointerWithContext< GattWriteAuthCallbackParams * > | |
►CSafeBool< FunctionPointerWithContext< OnEventsToProcessCallbackContext * > > | |
CFunctionPointerWithContext< OnEventsToProcessCallbackContext * > | |
►CSafeBool< FunctionPointerWithContext< TimeoutSource_t > > | |
CFunctionPointerWithContext< TimeoutSource_t > | |
►CSafeBool< FunctionPointerWithContext< unsigned > > | |
CFunctionPointerWithContext< unsigned > | |
►Cbase_control_t | POD version of the class control_t |
Ccontrol_t | Control class for specifying test case attributes |
CBatteryService | BLE Battery service |
CBLE | Abstract away BLE-capable radio transceivers or SOCs |
CBLEInstanceBase | Private interface used to implement the BLE class |
►CBlockDevice | A hardware device capable of writing and reading blocks |
CDataFlashBlockDevice | BlockDevice for DataFlash flash devices |
CFlashIAPBlockDevice | BlockDevice using the FlashIAP API |
CI2CEEBlockDevice | BlockDevice for I2C based flash device such as Microchip's 24LC or ATMEL's AT24C ranges |
CBufferedBlockDevice | Block device for allowing minimal read and program sizes (of 1) for the underlying BD, using a buffer on the heap |
CChainingBlockDevice | Block device for chaining multiple block devices with the similar block sizes at sequential addresses |
CExhaustibleBlockDevice | Heap backed block device which simulates failures |
CFlashSimBlockDevice | Flash simulating block device |
CHeapBlockDevice | Lazily allocated heap-backed block device |
CMBRBlockDevice | Block device for managing a Master Boot Record https://en.wikipedia.org/wiki/Master_boot_record |
CObservingBlockDevice | |
CProfilingBlockDevice | Block device for measuring storage operations of another block device |
CReadOnlyBlockDevice | |
CSlicingBlockDevice | Block device for mapping to a slice of another block device |
CQSPIFBlockDevice | BlockDevice for SFDP based flash devices over QSPI bus |
CSDBlockDevice | SDBlockDevice class |
CSPIFBlockDevice | BlockDevice for SFDP based flash devices over SPI bus |
CSPIFReducedBlockDevice | Reduced BlockDevice for SPI based flash devices Should only be used by Boot Loader |
Cboot_t | |
CBounded< Rep, Min, Max > | Restrict values of an integer type to a defined range |
CBounded< uint16_t, 0, 0x01F3 > | |
Cbuffer_s | Generic buffer structure |
Cbyte_array_t< array_size > | Model fixed size array values |
►Cbyte_array_t< 6 > | |
Caddress_t | MAC address data type |
CByteBuffer | |
CCallback< F > | Callback class based on template specialization |
►CCallback< R()> | |
CFunctionPointerArg1< R, void > | |
CCallback< R(A0)> | |
CCallback< R(A0, A1)> | |
►CCallback< R(A1)> | |
CFunctionPointerArg1< R, A1 > | |
CCallback< R(ArgTs...)> | Callback class based on template specialization |
CCallback< uint8_t(void)> | |
CCallback< void()> | |
CCallback< void(AudioEvent)> | |
CCallback< void(bool channel_busy)> | |
CCallback< void(bool up)> | |
CCallback< void(bool)> | |
CCallback< void(CIoT_Supported_Opt)> | |
CCallback< void(const uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr)> | |
CCallback< void(int)> | |
CCallback< void(lorawan_event_t)> | |
CCallback< void(mbed::BlockDevice *)> | |
CCallback< void(net_stack_mem_buf_t *buf)> | |
CCallback< void(nsapi_event_t, intptr_t)> | |
CCallback< void(uint8_t current_channel)> | |
CCallback< void(uint8_t up, int8_t device_id)> | |
CCallback< void(uint8_t, uint8_t)> | |
CCallback< void(void)> | |
►CCAN_Message | Holder for single CAN message |
CCANMessage | CANMessage class |
Ccan_pinmap_t | |
►Ccase_t | POD data structure of the Case class |
CCase | Test case wrapper class |
Ccell_callback_data_t | |
Ccell_signal_quality_t | |
►CCellularDevice | Class CellularDevice |
CAT_CellularDevice | Class AT_CellularDevice |
►CCellularInformation | Class CellularInformation |
CAT_CellularInformation | Class AT_CellularInformation |
CCellularList< T > | Class CellularList |
►CCellularNetwork | An abstract interface for connecting to a network and getting information from it |
CAT_CellularNetwork | Class AT_CellularNetwork |
CAT_CellularStack::CellularSocket | |
CCellularStateMachine | CellularStateMachine class |
Ccentral_privay_configuration_t | Privacy configuration of the central role |
Cchannel_params_t | DO NOT MODIFY, WILL BREAK THE API! |
Cchannel_selection_params_s | The parameter structure for the function RegionNextChannel |
CCharacteristicDescriptorDiscovery | Definitions of events and event handlers that the characteristic descriptor discovery procedure uses |
CCircularBuffer< T, BufferSize, CounterType > | Templated Circular buffer class |
CCircularBuffer< char, 256 > | |
CCircularBuffer< FrameTypes, 3 > | |
CGap::ConnectionCallbackParams_t | Connection events |
CConnectionCompleteEvent | Event generated when a connection initiation ends (successfully or not) |
CConnectionParameters | Parameters defining the connection initiation process |
CConnectionParametersUpdateCompleteEvent | Event received when connection parameters have been updated |
CGap::ConnectionParams_t | Parameters of a BLE connection |
Ccontinuous_wave_mode_params_s | |
►CControlPlane_netif | Implements support for data transfer using Control Plane CIoT EPS optimization specified in 3GPP 23.401(4.10), 3GPP 23.682(4.5.14) |
CAT_ControlPlane_netif | |
Ccore_util_atomic_flag | A lock-free, primitive atomic flag |
Ccrc_mbed_config | |
CCriticalSectionLock | RAII object for disabling, then restoring, interrupt state Usage: |
►CCThunkBase | |
CCThunk< T > | Class for created a pointer with data bound to it |
Cloramac_frame_ctrl_t::ctrl_bits_s | |
Ccy_ip_addr_t | |
Ccy_ip_addr_v4_t | |
Ccy_ip_addr_v6_t | |
Ccy_mac_addr_t | Structure for storing a MAC address (Wi-Fi Media Access Control address) |
CCyDhcpServer | Implementation of a DHCP sever |
CDeepSleepLock | RAII object for disabling, then restoring the deep sleep mode Usage: |
CDefaultFormFactor | This is a convenience class for use with the above templates |
►CDelegate | |
CSimpleMessageParser | Basic message parser that aggregates URIParser, TextParser and MimeParser |
►CDelegate | |
CSimpleMessageParser | Basic message parser that aggregates URIParser, TextParser and MimeParser |
►CPN512TransportDriver::Delegate | The PN512TransportDriver delegate |
CPN512Driver | |
CSimpleMessageParser::Delegate | Delegate invoked when the parser raise an event |
►CMessageParser::Delegate | Report parsing event to the application |
CSimpleMessageParser | Basic message parser that aggregates URIParser, TextParser and MimeParser |
CGenericRecordParser< ParserImplementation, ParsingResult >::Delegate | Handle that receives parsed values |
►CNFCController::Delegate | The NFCController delegate |
CNFCProcessController | Wrapper class handles calls and callbacks for NFC controller drivers |
►CNFCControllerDriver::Delegate | The NFCControllerDriver delegate |
CNFCController | This class represents a NFC Controller |
►CNFCEEPROMDriver::Delegate | The NFCEEPROMDriver delegate |
CNFCEEPROM | The NFC EEPROM class represents a NFC target device connected using a wired link (I2C, SPI, etc) |
►CNFCNDEFCapable::Delegate | |
►CNFCRemoteInitiator::Delegate | The NFCRemoteInitiator delegate |
CNFCProcessController | Wrapper class handles calls and callbacks for NFC controller drivers |
►CNFCTarget::Delegate | |
CNFCEEPROM::Delegate | The NFCEEPROM delegate |
►CNFCRemoteEndpoint::Delegate | The NFCRemoteEndpoint base delegate |
CNFCRemoteInitiator::Delegate | The NFCRemoteInitiator delegate |
►CDelegate | |
CSimpleMessageParser | Basic message parser that aggregates URIParser, TextParser and MimeParser |
Cdevice_err_t | AT response error with error code and type |
CDeviceInformationService | BLE Device Information Service Service: https://developer.bluetooth.org/gatt/services/Pages/ServiceViewer.aspx?u=org.bluetooth.service.device_information.xml Manufacturer Name String Char: https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.manufacturer_name_string.xml |
Cdhcp_packet_t | |
CDigitalIn | A digital input, used for reading the state of a pin |
CDigitalInOut | A digital input/output, used for setting or reading a bi-directional pin |
CDigitalOut | A digital output, used for setting the state of a pin |
Cdirent | |
CGap::DisconnectionCallbackParams_t | Disconnection event |
CDisconnectionCompleteEvent | Event produced when a disconnection is complete |
CDiscoveredCharacteristic | Representation of a characteristic discovered |
CDiscoveredCharacteristicDescriptor | Representation of a characteristic descriptor discovered |
CDiscoveredService | Representation of a GATT service discovered |
CCharacteristicDescriptorDiscovery::DiscoveryCallbackParams_t | Characteristic descriptor discovered event |
►CDNS | Base class for DNS provider |
►CNetworkInterface | Common interface that is shared between network devices |
►CCellularInterface | Common interface that is shared between cellular interfaces |
►CCellularContext | CellularContext is CellularInterface/NetworkInterface with extensions for cellular connectivity |
CAT_CellularContext | |
►CEMACInterface | EMACInterface class Implementation of the NetworkInterface for an EMAC-based driver |
CEthernetInterface | Implementation of the NetworkStack for an EMAC-based Ethernet driver |
CRDAWiFiInterface | RDAWiFiInterface class Implementation of the NetworkStack for an EMAC-based Ethernet driver |
CWhdSoftAPInterface | WhdSoftAPInterface class Implementation of the SoftAPInterface for the Whd |
CWhdSTAInterface | WhdSTAInterface class Implementation of the NetworkStack for the WHD |
►CEthInterface | Common interface between Ethernet hardware |
CEthernetInterface | Implementation of the NetworkStack for an EMAC-based Ethernet driver |
CNanostackEthernetInterface | Ethernet interface for Nanostack |
►CInterfaceNanostack | |
►CMeshInterfaceNanostack | |
CLoWPANNDInterface | 6LoWPAN-ND mesh network interface class |
CThreadInterface | Thread mesh network interface class |
CWisunInterface | Wi-SUN mesh network interface class |
CNanostackEthernetInterface | Ethernet interface for Nanostack |
CL3IPInterface | L3IPInterface class Implementation of the NetworkInterface for an IP-based driver |
►CMeshInterface | Common interface that is shared between mesh hardware |
CMeshInterfaceNanostack | |
CPPPInterface | PPPInterface class Implementation of the NetworkInterface for an PPP-service |
►CWiFiInterface | Common interface between Wi-Fi devices |
CRDAWiFiInterface | RDAWiFiInterface class Implementation of the NetworkStack for an EMAC-based Ethernet driver |
CWhdSTAInterface | WhdSTAInterface class Implementation of the NetworkStack for the WHD |
►CNetworkStack | NetworkStack class |
CAT_CellularStack | Class AT_CellularStack |
►COnboardNetworkStack | Mbed OS API for onboard IP stack abstraction |
CEmacTestNetworkStack | |
CNanostack | |
Cdns_application_data | |
Cdr_range_t | DO NOT MODIFY, WILL BREAK THE API! |
CDuration< Rep, TB, Range, Forever > | Model BLE durations |
CDuration< uint16_t, 10000, Range< 0x0A, 0x0C80 > > | |
CDuration< uint16_t, 1250, Range< 0x06, 0x0C80 > > | |
CDuration< uint16_t, 625, Range< 0x04, 0xFFFF > > | |
CDuration< uint32_t, 625, Range< 0x20, 0xFFFFFF > > | |
CDynamicPinList | |
Cecc_key_t | Structure definition to carry pointer and size information about an Elliptic curve key which is stored in a buffer(key_buf) in raw format (without encoding): |
CEddystone | Eddystone Configuration Service |
CEddystoneConfigService | Eddystone Configuration Service |
CEddystoneService | |
CAdvertisingDataParser::element_t | Representation of an Advertising Data element |
►CEMAC | This interface should be used to abstract low level access to networking hardware All operations receive a void * hardware pointer which an EMAC device provides when it is registered with a stack |
Cfvp_EMAC | |
CGD32_EMAC | |
CKinetis_EMAC | |
CKinetis_EMAC | |
CLPC17_EMAC | |
CLPC546XX_EMAC | |
CNUMAKER_EMAC | |
COdinWiFiEMAC | |
CRDA5981x_EMAC | |
CRZ_A1_EMAC | |
CSL_EMAC | |
CSMSC9220_EMAC | |
CSTM32_EMAC | |
CWHD_EMAC | |
CEMAC_CFG_Type | EMAC configuration structure definition |
Cemac_memory | |
CEMAC_PACKETBUF_Type | TX Data Buffer structure definition |
Cenable_if< B, R > | |
Cenable_if< false, R > | |
CEndpointResolver | Utility class for resolving endpoints |
CEnvironmentalService | BLE Environmental Service |
CUSBEndpointTester::ep_config_t | |
Cequeue | |
Cequeue::equeue_background | |
Cequeue_event | |
Cequeue::equeue_slab | |
Ceth_descriptor | |
CEvent< F > | Event |
CEvent< void(ArgTs...)> | Event |
CGap::EventHandler | Definition of the general handler of Gap related events |
CGattClient::EventHandler | Definition of the general handler of GattClient related events |
CGattServer::EventHandler | Definition of the general handler of GattServer related events |
CSecurityManager::EventHandler | The stack will use these functions to signal events to the application, subclass to override handlers |
Cfactorial_data | |
Cfailure_t | Contains the reason and location of the failure |
CFATFS | |
CFATFS_DIR | |
CFFOBJID | |
Cdr_range_t::fields_s | The structure to store the minimum and the maximum datarate |
CFIL | |
CFilePath | Class FilePath |
CFILINFO | |
Cfirmware_info | |
Cflags_check_capture | |
Cflash_algo_t | Target flash algorithm structure |
Cflash_s | Target flash configuration For targets not supporting TrustZone, its flash_set_target_config must define target_config |
Cflash_target_config_t | Flash configuration structure |
Cfsfat_kv_data_t | |
Cfslittle_kv_data_t | |
CFunctionCaller< PortType, FunctionType, f > | |
CFunctionCaller< PortType, TF1, f > | |
CFunctionCaller< PortType, TF2, f > | |
CFunctionCaller< PortType, TF3, f > | |
CFunctionCaller< PortType, TF4, f > | |
CFunctionCaller< PortType, TF5, f > | |
►CGap | Define device discovery, connection and link management procedures |
CGap | Define device discovery, connection and link management procedures. |
CGapAdvertisingData | GAP advertising data builder |
CGapAdvertisingParams | Parameters defining the advertising process |
CGapScanningParams | Parameters defining the scan process |
CGap::GapState_t | Description of the states of the device |
CGattAttribute | Representation of a GattServer attribute |
►CGattCharacteristic | Representation of a GattServer characteristic |
CReadOnlyArrayGattCharacteristic< T, NUM_ELEMENTS > | Helper class that represents a read-only GattCharacteristic with an array value |
CReadOnlyGattCharacteristic< T > | Helper class that represents a read only GattCharacteristic |
CReadOnlyGattCharacteristic< HumidityType_t > | |
CReadOnlyGattCharacteristic< PressureType_t > | |
CReadOnlyGattCharacteristic< TemperatureType_t > | |
CReadOnlyGattCharacteristic< TemperatureValueBytes > | |
CReadOnlyGattCharacteristic< uint8_t > | |
CReadWriteArrayGattCharacteristic< T, NUM_ELEMENTS > | Helper class that represents a readable and writable GattCharacteristic with an array value |
CReadWriteGattCharacteristic< T > | Helper class that represents a readable and writable GattCharacteristic |
CReadWriteGattCharacteristic< PowerLevels_t > | |
CReadWriteGattCharacteristic< uint16_t > | |
CReadWriteGattCharacteristic< uint8_t > | |
CWriteOnlyArrayGattCharacteristic< T, NUM_ELEMENTS > | Helper class that represents a write-only GattCharacteristic with an array value |
CWriteOnlyGattCharacteristic< T > | Helper class that represents a write only GattCharacteristic |
CWriteOnlyGattCharacteristic< Lock_t > | |
CWriteOnlyGattCharacteristic< uint8_t > | |
CGattClient | Define procedures required for interacting with a distant GATT server |
CGattHVXCallbackParams | Handle Value Notification/Indication event |
CGattReadAuthCallbackParams | GATT read authorization request event |
CGattReadCallbackParams | GATT Read event definition |
CGattServer | Construct and operates a GATT server |
CGattServerEvents | Abstract events generated by a GattServer vendor port |
CGattService | Representation of a GattServer service |
CGattWriteAuthCallbackParams | GATT write authorization request event |
CGattWriteCallbackParams | GATT Write event definition |
CGPIOIRQMaps | |
CGPIOMaps | |
Chandlers_t | A table of handlers |
CHandleTestCommand | HandleTestCommand turns all the typed-in/serial commands into function calls sent via a eventqueue to the driver shim/wrapper class |
CHarness | Test Harness |
Cloramac_mhdr_t::hdr_bits_s | |
CHeader | Set of constants of a record header |
CHealthThermometerService | BLE Health Thermometer Service |
CHeartRateService | BLE Heart Rate Service |
CHeartRateService::HeartRateValueBytes | |
CHID_REPORT | |
Ci2c_pinmap_t | |
Ci2c_t | Asynch I2C HAL structure |
CI2CMaps | |
CI2CSlave | An I2C Slave, used for communicating with an I2C Master device |
CIEEE754_union | |
Cinfo | The key size |
CKVStore::info | Holds key information |
CBLE::InitializationCompleteCallbackContext | Initialization complete event |
►COnboardNetworkStack::Interface | Representation of a stack's view of an interface |
CEmacTestNetworkStack::Interface | |
►CNanostack::Interface | |
CNanostack::EthernetInterface | |
CNanostack::MeshInterface | |
CNanostack::PPPInterface | |
CNanostackEMACInterface | |
CNanostackRfInterface | |
Ciovec_args_t | Holds the iovec parameters that are passed to a service |
Cipc_consumer_queue_t | |
Cipc_producer_queue_t | |
Cis_convertible< From, To > | |
Cis_type< M, M > | |
Cis_unsigned< T > | |
Cis_unsigned< unsigned char > | |
Cis_unsigned< unsigned int > | |
Cis_unsigned< unsigned long > | |
Cis_unsigned< unsigned long long > | |
Cis_unsigned< unsigned short > | |
Citems_to_get_t | |
Ckv_map_entry_t | This structure maps between a string name and a partition configuration |
►CKVStore | KVStore class |
CFileSystemStore | FileSystemStore for Secure Store |
CSecureStore | TDBStore class |
CTDBStore | TDBStore class |
Ckvstore_config_t | This structure represent a KVStore partition configuration |
►CL3IP | This interface should be used to abstract low level access to networking hardware All operations receive a void * hardware pointer which an l3ip device provides when it is registered with a stack |
CCellular_driver_L3IP | |
Clan8742_IOCtx_t | |
Clan8742_Object_t | |
Clfs | |
Clfs_cache | |
Clfs_config | |
Clfs_dir | |
Clfs_dir::lfs_disk_dir | |
Clfs_entry::lfs_disk_entry | |
Clfs_superblock::lfs_disk_superblock | |
Clfs_emubd | |
Clfs_entry | Littlefs data structures /// |
Clfs_file | |
Clfs_file_config | |
Clfs_free | |
Clfs_info | |
Clfs_superblock | |
Clink_adr_params_s | Structure containing data for local ADR settings |
►CLinkedListBase | |
CLinkedList< T > | |
CLinkedList< events::TaskBase > | |
►CLinkEntry | |
CAsyncOp | |
►CTaskBase | TaskBase |
CTask< R()> | |
CTask< R(A0)> | |
CTask< R(A0, A1)> | Task |
CLinkLossService | This service defines behavior when a link is lost between two devices |
CLockGuard | RAII mutex locker |
Clora_channelplan | DO NOT MODIFY, WILL BREAK THE API! |
Clora_channels_s | DO NOT MODIFY, WILL BREAK THE API! |
Clora_mac_system_params_t | |
CLoRaMac | LoRaMac Class Implementation of LoRaWAN MAC layer |
Cloramac_frame_ctrl_t | |
Cloramac_keys | |
Cloramac_mcps_confirm_t | |
Cloramac_mcps_indication_t | |
Cloramac_mhdr_t | |
Cloramac_mlme_confirm_t | |
Cloramac_mlme_indication_t | |
Cloramac_protocol_params | |
Cloramac_rx_message_t | Loramac_rx_message_t |
Cloramac_tx_message_t | Stack level TX message structure |
CLoRaMacChannelPlan | |
CLoRaMacCommand | LoRaMacCommand Class Helper class for LoRaMac layer to handle any MAC commands |
CLoRaMacCrypto | |
Cloraphy_channels_t | |
Cloraphy_params_t | |
Cloraphy_table_t | |
CLoRaRadio | Interface for the radios, containing the main functions that a radio needs, and five callback functions |
Clorawan_app_callbacks_t | Stack level callback functions |
Clorawan_connect | Lorawan_connect_t structure |
Clorawan_connect_abp_t | The lorawan_connect_abp structure |
Clorawan_connect_otaa_t | The lorawan_connect_otaa structure |
Clorawan_rx_metadata | Meta-data collection for the received packet |
Clorawan_session | LoRaWAN session |
Clorawan_timers | |
Clorawan_tx_metadata | Meta-data collection for a transmission |
CLoRaWANInterface | LoRaWANInterface Class A network interface for LoRaWAN |
CLoRaWANTimeHandler | / _____) _ | | ( (____ _____ ____ _| |_ _____ ____| |__ ____ | ___ | (_ _) ___ |/ ___) _ \ _____) ) ____| | | || |_| ____( (___| | | | (______/|_____)_|_|_| __)_____)____)_| |_| (C)2013 Semtech |
CLowPowerTickerWrapper | |
Cmaclib_buf_t | |
Cmaclib_func_t | |
Cmaclib_import_func_t | |
Cmaclib_msg_t | Structures |
Cmbed_fault_context_t | |
Cmbed_stats_cpu_t | Struct mbed_stats_cpu_t definition |
Cmbed_stats_heap_t | Struct mbed_stats_heap_t definition |
Cmbed_stats_socket_t | Structure to parse socket statistics |
Cmbed_stats_stack_t | Struct mbed_stats_stack_t definition |
Cmbed_stats_sys_t | Struct mbed_stats_sys_t definition |
Cmbed_stats_thread_t | Struct mbed_stats_thread_t definition |
CMbedCRC< polynomial, width > | CRC object provides CRC generation through hardware or software |
►CMbedTester | The base class for controlling the FPGA CI Test Shield |
CI2CTester | |
►CSPITester | |
CSPIMasterTester | |
CSPISlaveTester | |
CUARTTester | |
Cmd5_context | / |
Cmem_region | |
Cmesh_mac_statistics_t | Mesh physical layer statistics |
Cmesh_nw_statistics_t | Mesh network statistics |
CMessageBuilder | Construct a NDEF Message |
CMessageParser | Event driven NDEF Message parser |
CMIDIMessage | A MIDI message container |
CMime | Represent a mime object |
Cmlme_cw_tx_mode_t | |
Cmlme_join_req_t | |
Cmulticast_params_s | |
CNanostackLockGuard | RAII style Nanostack mutex acquisition |
►CNanostackPhy | PHY driver class for Nanostack |
►CNanostackMACPhy | MAC PHY driver class for Nanostack |
CNanostackEthernetPhy | Ethernet PHY driver class for Nanostack |
CNanostackRfPhy | Radio PHY driver class for Nanostack |
CNanostackPPPPhy | PPP PHY driver class for Nanostack |
Cnetif | |
►CNetStackMemoryManager | |
►CEMACMemoryManager | |
CEmacTestMemoryManager | |
CNanostackMemoryManager | |
Cnfc_rf_protocols_bitmask_t | |
►CNFCControllerDriver | The abstraction for a NFC controller driver |
CPN512Driver | |
CNFCEEPROMDriver | The abstraction for a NFC EEPROM driver |
►CNFCNDEFCapable | The base class for all endpoints that can support NDEF content |
►CNFCRemoteInitiator | This class represents a remote NFC initiator (the local controller being in target mode) |
CType4RemoteInitiator | This class is an implementation of the Type 4 tag application |
►CNFCTarget | This class represents a NFC target (either a remote target when the local controller in in initiator mode, or a target connected through a wired connection) |
CNFCEEPROM | The NFC EEPROM class represents a NFC target device connected using a wired link (I2C, SPI, etc) |
►CNFCRemoteEndpoint | This is the base class for all remote endpoints (initiators and targets) addressable over the air interface |
CNFCRemoteInitiator | This class represents a remote NFC initiator (the local controller being in target mode) |
►CNFCTestShim | Test app driver wrapper |
CNFCProcessController | Wrapper class handles calls and callbacks for NFC controller drivers |
Cnil | |
CNonCopyable< T > | Prevents generation of copy constructor and copy assignment operator in derived classes |
►CNonCopyable< ATCmdParser > | |
CATCmdParser | Parser class for parsing AT commands |
►CNonCopyable< BusIn > | |
CBusIn | A digital input bus, used for reading the state of a collection of pins |
►CNonCopyable< BusInOut > | |
CBusInOut | A digital input output bus, used for setting the state of a collection of pins |
►CNonCopyable< BusOut > | |
CBusOut | A digital output bus, used for setting the state of a collection of pins |
►CNonCopyable< CallChain > | |
CCallChain | Group one or more functions in an instance of a CallChain, then call them in sequence using CallChain::call() |
►CNonCopyable< CAN > | |
CCAN | A can bus client, used for communicating with can devices |
►CNonCopyable< ConditionVariable > | |
CConditionVariable | Synchronization primitive that allows threads to wait until a particular condition occurs |
►CNonCopyable< DeviceKey > | |
CDeviceKey | |
►CNonCopyable< DirHandle > | |
►CDirHandle | Represents a directory stream |
CDir | Dir class |
►CNonCopyable< EmacTestNetworkStack > | |
CEmacTestNetworkStack | |
►CNonCopyable< Ethernet > | |
CEthernet | An ethernet interface, to use with the ethernet pins |
►CNonCopyable< EventFlags > | |
CEventFlags | Used to control event flags or wait for event flags other threads control |
►CNonCopyable< EventQueue > | |
CEventQueue | EventQueue |
►CNonCopyable< FileBase > | |
►CFileBase | Class FileBase |
►CFileLike | Class FileLike |
►CStream | File stream |
CSerial | A serial port (UART) for communication with other serial devices |
CUSBKeyboard | USBKeyboard example |
CUSBMouseKeyboard | USBMouseKeyboard example |
CUSBSerial | USBSerial example |
►CFileSystemLike | A filesystem-like object is one that can be used to open file-like objects though it by fopen("/name/filename", mode) |
►CFileSystem | A file system object |
CFATFileSystem | FAT file system based on ChaN's FAT file system library v0.8 |
CLittleFileSystem | LittleFileSystem, a little file system |
►CNonCopyable< FileHandle > | |
►CFileHandle | Class FileHandle |
CFile | File class |
CFileLike | Class FileLike |
CSerialWireOutput | |
CUARTSerial | Class providing buffered UART communication functionality using separate circular buffer for send and receive channels |
CTestFile< FILE_SIZE > | |
►CNonCopyable< FileLike > | |
CFileLike | Class FileLike |
►CNonCopyable< FileSystemHandle > | |
►CFileSystemHandle | A filesystem-like object is one that can be used to open file-like objects though it by fopen("/name/filename", mode) |
CFileSystemLike | A filesystem-like object is one that can be used to open file-like objects though it by fopen("/name/filename", mode) |
►CNonCopyable< FileSystemLike > | |
CFileSystemLike | A filesystem-like object is one that can be used to open file-like objects though it by fopen("/name/filename", mode) |
►CNonCopyable< FlashIAP > | |
CFlashIAP | Flash IAP driver |
►CNonCopyable< I2C > | |
CI2C | An I2C Master, used for communicating with I2C slave devices |
►CNonCopyable< InterruptIn > | |
CInterruptIn | A digital interrupt input, used to call a function on a rising or falling edge |
►CNonCopyable< InterruptManager > | |
CInterruptManager | Use this singleton if you need to chain interrupt handlers |
►CNonCopyable< KVMap > | |
CKVMap | KVMap class |
►CNonCopyable< LoRaPHY > | |
CLoRaPHY | LoRaPHY Class Parent class for LoRa regional PHY implementations |
►CNonCopyable< LoRaWANStack > | |
CLoRaWANStack | LoRaWANStack Class A controller layer for LoRaWAN MAC and PHY |
►CNonCopyable< LowPowerTicker > | |
►CLowPowerTicker | Low Power Ticker |
CLowPowerTimeout | Low Power Timout |
►CNonCopyable< LowPowerTimeout > | |
CLowPowerTimeout | Low Power Timout |
►CNonCopyable< LowPowerTimer > | |
CLowPowerTimer | Low power timer |
►CNonCopyable< Mail< T, queue_sz > > | |
CMail< T, queue_sz > | The Mail class allows you to control, send, receive or wait for mail |
►CNonCopyable< MemoryPool< T, pool_sz > > | |
CMemoryPool< T, queue_sz > | |
CMemoryPool< T, pool_sz > | Define and manage fixed-size memory pools of objects of a given type |
►CNonCopyable< MeshInterfaceNanostack > | |
CMeshInterfaceNanostack | |
►CNonCopyable< Mutex > | |
CMutex | Used to synchronize the execution of threads |
►CNonCopyable< Nanostack > | |
CNanostack | |
►CNonCopyable< Nanostack::Interface > | |
CNanostack::Interface | |
►CNonCopyable< NanostackEthernetInterface > | |
CNanostackEthernetInterface | Ethernet interface for Nanostack |
►CNonCopyable< NVStore > | |
CNVStore | NVStore class |
►CNonCopyable< PlatformMutex > | |
CPlatformMutex | Used to synchronize the execution of threads |
►CNonCopyable< QSPI > | |
CQSPI | A QSPI Driver, used for communicating with QSPI slave devices |
►CNonCopyable< Queue< T, queue_sz > > | |
CQueue< T, queue_sz > | The Queue class represents a collection of objects that are stored first by order of priority, and then in first-in, first-out (FIFO) order |
►CNonCopyable< RawSerial > | |
►CRawSerial | A serial port (UART) for communication with other serial devices This is a variation of the Serial class that doesn't use streams, thus making it safe to use in interrupt handlers with the RTOS |
CGreenteaSerial | |
►CNonCopyable< RtosTimer > | |
CRtosTimer | Allow creating and and controlling of timer functions in the system |
►CNonCopyable< ScopedLock< Lockable > > | |
CScopedLock< Lockable > | RAII-style mechanism for owning a lock of Lockable object for the duration of a scoped block |
►CNonCopyable< ScopedRamExecutionLock > | |
CScopedRamExecutionLock | RAII object for disabling, then restoring RAM execute never mode Usage: |
►CNonCopyable< ScopedRomWriteLock > | |
CScopedRomWriteLock | RAII object for disabling, then restoring ROM write never mode Usage: |
►CNonCopyable< Semaphore > | |
CSemaphore | Used to manage and protect access to a set of shared resources |
►CNonCopyable< Serial > | |
CSerial | A serial port (UART) for communication with other serial devices |
►CNonCopyable< SerialBase > | |
►CSerialBase | A base class for serial port implementations Can't be instantiated directly (use Serial or RawSerial) |
CRawSerial | A serial port (UART) for communication with other serial devices This is a variation of the Serial class that doesn't use streams, thus making it safe to use in interrupt handlers with the RTOS |
CSerial | A serial port (UART) for communication with other serial devices |
CUARTSerial | Class providing buffered UART communication functionality using separate circular buffer for send and receive channels |
►CNonCopyable< SPI > | |
CSPI | A SPI Master, used for communicating with SPI slave devices |
►CNonCopyable< SPISlave > | |
CSPISlave | A SPI slave, used for communicating with a SPI master device |
►CNonCopyable< Stream > | |
CStream | File stream |
►CNonCopyable< SysTimer< US_IN_TICK, IRQ > > | |
CSysTimer< US_IN_TICK, IRQ > | The SysTimer class is used to provide timing for system suspension, and the idle loop in TICKLESS mode |
►CNonCopyable< Thread > | |
CThread | Allow defining, creating, and controlling thread functions in the system |
►CNonCopyable< Ticker > | |
►CTicker | A Ticker is used to call a function at a recurring interval |
CLowPowerTicker | Low Power Ticker |
CTimeout | A Timeout is used to call a function at a point in the future |
►CNonCopyable< Timeout > | |
CTimeout | A Timeout is used to call a function at a point in the future |
►CNonCopyable< TimerEvent > | |
►CTimerEvent | Base abstraction for timer interrupts |
CSysTimer< US_IN_TICK, IRQ > | The SysTimer class is used to provide timing for system suspension, and the idle loop in TICKLESS mode |
CTicker | A Ticker is used to call a function at a recurring interval |
►CNonCopyable< UARTSerial > | |
CUARTSerial | Class providing buffered UART communication functionality using separate circular buffer for send and receive channels |
►CNonCopyable< USBEndpointTester > | |
CUSBEndpointTester | |
►CNonCopyable< USBTester > | |
CUSBTester | |
►CNonCopyable< Watchdog > | |
CWatchdog | A hardware watchdog timer that resets the system in the case of system failures or malfunctions |
CNOOS_IP | |
CNOOS_PACKET_POOL | |
Cnsapi_addr | IP address structure for passing IP addresses by value |
Cnsapi_ip_mreq | Nsapi_ip_mreq structure |
Cnsapi_latency_req | Nsapi_latency_req structure |
Cnsapi_stack | Nsapi_stack structure |
Cnsapi_stack_api | Nsapi_stack_api structure |
Cnsapi_stagger_req | Nsapi_stagger_req structure |
Cnsapi_wifi_ap | Nsapi_wifi_ap structure |
Cnvmem_param_t | |
CWhdSTAInterface::OlmInterface | |
CBLE::OnEventsToProcessCallbackContext | Events to process event |
►COperationListBase | |
COperationList< T > | |
COperationList< AsyncRead > | |
COperationList< AsyncSend > | |
COperationList< AsyncWait > | |
COperationList< AsyncWrite > | |
CAllArgs< B0 >::Operations< T, _ > | |
CAllArgs< B0, B1 >::Operations< T, _ > | |
CAllArgs< B0, B1, B2 >::Operations< T, _ > | |
CAllArgs< B0, B1, B2, B3 >::Operations< T, _ > | |
CAllArgs< B0, B1, B2, B3, B4 >::Operations< T, _ > | |
CAllArgs< B0, B1, B2, B3, B4, B5 >::Operations< T, _ > | |
CAllArgs< B0, B1 >::Operations< T *, R(U::*)()> | |
CAllArgs< B0, B1, B2 >::Operations< T *, R(U::*)(B2)> | |
CAllArgs< B0, B1, B2, B3 >::Operations< T *, R(U::*)(B2, B3)> | |
CAllArgs< B0, B1, B2, B3, B4 >::Operations< T *, R(U::*)(B2, B3, B4)> | |
CAllArgs< B0, B1, B2, B3, B4, B5 >::Operations< T *, R(U::*)(B2, B3, B4, B5)> | |
CAllArgs< B0, B1 >::Operations< T, R(U::*)() const > | |
CAllArgs< B0, B1 >::Operations< T, R(U::*)() const volatile > | |
CAllArgs< B0, B1 >::Operations< T, R(U::*)() volatile > | |
CAllArgs< B0, B1, B2 >::Operations< T, R(U::*)(B2) const > | |
CAllArgs< B0, B1, B2 >::Operations< T, R(U::*)(B2) const volatile > | |
CAllArgs< B0, B1, B2 >::Operations< T, R(U::*)(B2) volatile > | |
CAllArgs< B0, B1, B2, B3 >::Operations< T, R(U::*)(B2, B3) const > | |
CAllArgs< B0, B1, B2, B3 >::Operations< T, R(U::*)(B2, B3) const volatile > | |
CAllArgs< B0, B1, B2, B3 >::Operations< T, R(U::*)(B2, B3) volatile > | |
CAllArgs< B0, B1, B2, B3, B4 >::Operations< T, R(U::*)(B2, B3, B4) const > | |
CAllArgs< B0, B1, B2, B3, B4 >::Operations< T, R(U::*)(B2, B3, B4) const volatile > | |
CAllArgs< B0, B1, B2, B3, B4 >::Operations< T, R(U::*)(B2, B3, B4) volatile > | |
CAllArgs< B0, B1, B2, B3, B4, B5 >::Operations< T, R(U::*)(B2, B3, B4, B5) const > | |
CAllArgs< B0, B1, B2, B3, B4, B5 >::Operations< T, R(U::*)(B2, B3, B4, B5) const volatile > | |
CAllArgs< B0, B1, B2, B3, B4, B5 >::Operations< T, R(U::*)(B2, B3, B4, B5) volatile > | |
CCellularNetwork::operator_names_t | Cellular operator names in numeric and alpha format |
CCellularNetwork::operator_t | 3GPP TS 27.007 - 7.3 PLMN selection +COPS |
Cos_mailQ_def | Definition structure for mail queue |
Cos_messageQ_def | Definition structure for message queue |
Cos_pool_def | Definition structure for memory block allocation |
Cos_thread_def | Thread Definition structure contains startup information of a thread |
Cos_timer_def | Timer Definition structure contains timer parameters |
CosEvent | Event structure contains detailed information about an event |
CosEventFlagsAttr_t | Attributes structure for event flags |
CosMemoryPoolAttr_t | Attributes structure for memory pool |
CosMessageQueueAttr_t | Attributes structure for message queue |
CosMutexAttr_t | Attributes structure for mutex |
CosRtxConfig_t | OS Configuration structure |
CosRtxEventFlags_t | Event Flags Control Block |
CosRtxInfo_t | OS Runtime Information structure |
CosRtxMemoryPool_t | Memory Pool Control Block |
CosRtxMessage_s | Message Control Block |
CosRtxMessageQueue_t | Message Queue Control Block |
CosRtxMpInfo_t | Memory Pool Information |
CosRtxMutex_s | Mutex Control Block |
CosRtxObject_t | Generic Object Control Block |
CosRtxObjectMemUsage_t | OS Runtime Object Memory Usage structure |
CosRtxSemaphore_t | Semaphore Control Block |
CosRtxThread_s | Thread Control Block |
CosRtxTimer_s | Timer Control Block |
CosRtxTimerFinfo_t | Timer Function Information |
CosSemaphoreAttr_t | Attributes structure for semaphore |
CosThreadAttr_t | Attributes structure for thread |
CosTimerAttr_t | Attributes structure for timer |
CosVersion_t | Version information |
CEddystoneConfigService::Params_t | |
CURIBeaconConfigService::Params_t | |
CPasskeyAscii | Passkey stored as a string of digits |
CMessageBuilder::PayloadBuilder | Build a record payload |
Cpbuf | |
CCellularContext::pdpcontext_params_t | PDP Context information |
CPeriodicAdvertisingReportEvent | Event generated when periodic advertising packet is received |
CPeriodicAdvertisingSyncEstablishedEvent | Event generated when you first receive a periodic advertisement |
CPeriodicAdvertisingSyncLoss | Event generated when periodic advertising sync is lost |
Cperipheral_privacy_configuration_t | Privacy Configuration of the peripheral role |
CPeripheralList | |
CScanParameters::phy_configuration_t | Scan configuration of a physical channel |
Cphy_set_t | Type that describe a set of PHY(sical) transports |
CPinList | |
CPinMap | |
►CPN512TransportDriver | The PN512 supports multiple transport mechanisms (SPI, I2C, UART): this class provides a unified API across these transports |
CPN512SPITransportDriver | |
Cpollfd | |
Cpollfh | |
CPort< N, PinMapType, FormFactorType, FunctionType > | |
CPortIn | A multiple pin digital input |
CPortInOut | A multiple pin digital in/out used to set/read multiple bi-directional pins |
CPortOut | A multiple pin digital output |
►CPPP | |
Cppp_service | This interface should be used to abstract low level access to networking hardware All operations receive a void * hardware pointer which an ppp device provides when it is registered with a stack |
CGattCharacteristic::PresentationFormat_t | Value of a Characteristic Presentation Format descriptor |
CDiscoveredCharacteristic::Properties_t | Properties of a discovered characteristic |
Cpsa_aead_operation_s | |
Cpsa_api_t | |
Cpsa_cipher_operation_s | |
Cpsa_core_key_attributes_t | |
Cpsa_crypto_derivation_ipc_s | Psa_crypto_derivation_ipc_s struct used for some of the PSA Crypto APIs that need psa_key_handle_t and psa_algorithm_t arguments and in order to use the existing infrastructure of the SPM-IPC we provide a struct to pack them together |
Cpsa_crypto_ipc_aead_s | |
Cpsa_crypto_ipc_asymmetric_s | Psa_crypto_ipc_asymmetric_s struct used for asymmetric PSA Crypto APIs that need psa_key_handle_t and psa_algorithm_t arguments and in order to use the existing infrastructure of the SPM-IPC we provide a struct to pack them together |
Cpsa_crypto_ipc_s | Psa_crypto_ipc_s struct used for some of the PSA Crypto APIs that need psa_key_handle_t and psa_algorithm_t arguments and in order to use the existing infrastructure of the SPM-IPC we provide a struct to pack them together |
Cpsa_handle_item_t | |
Cpsa_handle_manager_t | |
Cpsa_hash_operation_s | |
Cpsa_invec | Structure that describes a scatter-gather input buffer |
Cpsa_key_attributes_s | |
Cpsa_key_derivation_s | |
Cpsa_key_mng_ipc_s | Psa_key_mng_ipc_s struct used for some of the PSA Crypto APIs that need psa_key_handle_t and psa_algorithm_t arguments and in order to use the existing infrastructure of the SPM-IPC we provide a struct to pack them together |
Cpsa_key_policy_s | |
Cpsa_mac_operation_s | |
Cpsa_msg | Structure containing the PSA IPC message sent from a client partition to an RoT Service |
Cpsa_msg_t | Describe a message received by an RoT Service after calling psa_get() |
Cpsa_outvec | Structure which describes a scatter-gather output buffer |
Cpsa_storage_info_t | A container for metadata associated with a specific uid |
Cpsa_storage_version_t | |
CPWMMaps | |
CPwmOut | A pulse-width modulation digital output |
CQCBORStringAllocator | This is a set of functions and pointer context (in object-oriented parlance, an "object") used to allocate memory for coalescing the segments of an indefinite length string into one |
CQCBORTagListIn | This is used to tell the decoder about tags that it should record in uTagBits in QCBORItem beyond the built-in tags |
CQCBORTagListOut | This is for QCBORDecode_GetNextWithTags() to be able to return the full list of tags on an item |
CQspi | |
Cqspi_command | QSPI command |
Cqspi_pinmap_t | |
CQspiCommand | |
►CQUECTEL_BG96 | |
CSTModCellular | |
Cradio_events | Reporting functions for upper layers |
Cradio_fsk_packet_handler | FSK packet handle |
Cradio_fsk_settings | FSK modem parameters |
Cradio_lora_packet_handler | LoRa packet Contains information about a LoRa packet |
Cradio_lora_settings | LoRa modem parameters |
Cradio_settings | Global radio settings |
Crda5981_apsta_info | |
Crda5981_scan_result | |
Crda5991h_user_data | |
Crda_enetdata_t | |
Crda_msg | |
CRecord | Represent a record |
►CRecordParser | Parse a record |
►CGenericRecordParser< MimeParser, Mime > | |
CMimeParser | Parse a Mime payload |
►CGenericRecordParser< TextParser, Text > | |
CTextParser | Parse a Text |
►CGenericRecordParser< URIParser, URI > | |
CURIParser | Parser of a URI |
CGenericRecordParser< ParserImplementation, ParsingResult > | GenericRecordParser |
CRecordParserChain | Record parser chain |
CRecordType | Encode a record type |
CCellularNetwork::registration_params_t | Network registration information |
Cremove_reference< T > | |
Cremove_reference< T & > | |
Cremove_reference< T && > | |
CResetReason | A platform-independent method of checking the cause of the last system reset |
Crf_ctrls | Structure to hold RF controls for LoRa Radio |
Crx2_channel_params | |
Crx_config_params_t | |
CRX_Desc | RX Descriptor structure type definition |
Crx_message_u | Lora_mac_rx_message_by_type_t union |
Crx_param_setup_req_s | Contains rx parameter setup request coming from network server |
CRX_Stat | RX Status structure type definition |
CSafeEnum< Target, LayoutType > | Helper class used to define safe enumerations |
►CSafeEnum< adv_data_appearance_t, uint16_t > | |
Cadv_data_appearance_t | Enumeration of values for the adv_data_type_t::APPEARANCE |
►CSafeEnum< adv_data_type_t, uint8_t > | |
Cadv_data_type_t | |
►CSafeEnum< advertising_data_status_t, uint8_t > | |
Cadvertising_data_status_t | Used to indicate if the packet is complete and if it's truncated |
►CSafeEnum< advertising_filter_policy_t, uint8_t > | |
Cadvertising_filter_policy_t | Advertising policy filter modes |
►CSafeEnum< advertising_type_t, uint8_t > | |
Cadvertising_type_t | Encapsulates the peripheral advertising modes |
►CSafeEnum< att_security_requirement_t, uint8_t > | |
Catt_security_requirement_t | Security requirement that can be attached to an attribute operation |
►CSafeEnum< clock_accuracy_t, uint8_t > | |
Cclock_accuracy_t | Accuracy of the master clock |
►CSafeEnum< coded_symbol_per_bit_t, uint8_t > | |
Ccoded_symbol_per_bit_t | Type describing the number of symbols per bit in le coded PHY |
►CSafeEnum< connection_role_t, uint8_t > | |
Cconnection_role_t | Enumeration of GAP roles |
►CSafeEnum< controller_supported_features_t, uint8_t > | |
Ccontroller_supported_features_t | Features supported by the controller |
►CSafeEnum< disconnection_reason_t, uint8_t > | |
Cdisconnection_reason_t | Enumeration of disconnection reasons received in a disconnection event |
►CSafeEnum< duplicates_filter_t, uint8_t > | |
Cduplicates_filter_t | Scanning policy filter mode |
►CSafeEnum< initiator_filter_policy_t, uint8_t > | |
Cinitiator_filter_policy_t | Filter policy that you can use during connection initiation |
►CSafeEnum< io_capability_t, uint8_t > | |
Cio_capability_t | Type that describe the IO capability of a device; it is used during Pairing Feature exchange |
►CSafeEnum< link_encryption_t, uint8_t > | |
Clink_encryption_t | Type that describes link's encryption state |
►CSafeEnum< local_disconnection_reason_t, uint8_t > | |
Clocal_disconnection_reason_t | Enumeration of disconnection reasons that should be transmited to the peer |
►CSafeEnum< own_address_type_t, uint8_t > | |
Cown_address_type_t | Type used to model the own address used during the following GAP operations: advertising, scanning and initiating |
►CSafeEnum< pairing_failure_t, uint8_t > | |
Cpairing_failure_t | Type that describe a pairing failure |
►CSafeEnum< peer_address_type_t, uint8_t > | |
Cpeer_address_type_t | Type that describes a peer device address type |
►CSafeEnum< phy_t, uint8_t > | |
Cphy_t | Type that describes a bluetooth PHY(sical) transport |
►CSafeEnum< random_address_type_t, uint8_t > | |
Crandom_address_type_t | Type that describes a random device address type |
►CSafeEnum< scanning_filter_policy_t, uint8_t > | |
Cscanning_filter_policy_t | Scanning policy filter mode |
►CSafeEnum< target_peer_address_type_t, uint8_t > | |
Ctarget_peer_address_type_t | Type of an address to connect to |
CScanParameters | Parameters defining the scan process |
CScanRequestEvent | Event produced when a peer requests a scan response from the advertiser |
CScanTimeoutEvent | Event generated when scan times out |
Csector_info_t | Sector information structure |
CSecurityManager | Overview |
Cserial_fc_pinmap_t | |
Cserial_pinmap_t | |
Cserial_t | Asynch serial HAL structure |
CServiceDiscovery | Host callback types needed by the service discovery procedure |
CUSBDevice::setup_packet_t | |
Cshared_data_tlv_entry | Shared data TLV entry header format |
Cshared_data_tlv_header | Shared data TLV header |
CSharedPtr< T > | Shared pointer class |
CSharedPtr< mbed::nfc::NFCRemoteInitiator > | |
CSingletonPtr< T > | Utility class for creating and using a singleton |
CSingletonPtr< PlatformMutex > | |
CSmartPoster | Smart poster object |
►CSocket | Socket interface |
►CInternetSocket | Socket implementation that uses IP network stack |
►CInternetDatagramSocket | InternetDatagramSocket socket implementation |
CICMPSocket | ICMP socket implementation |
CUDPSocket | UDP socket implementation |
►CTCPSocket | TCP socket connection |
CTCPServer | TCP socket server |
CCellularNonIPSocket | Socket implementation for cellular Non-IP data delivery(NIDD) |
►CTLSSocketWrapper | TLSSocket is a wrapper around Socket for interacting with TLS servers |
►CDTLSSocketWrapper | DTLSSocketWrapper implement DTLS stream over the existing Socket transport |
CDTLSSocket | DTLSSocket implement DTLS stream over UDP Socket |
CTLSSocket | TLSSocket is a wrapper around TCPSocket for interacting with TLS servers |
CSocketAddress | SocketAddress class |
CSocketStats | SocketStats class |
CSpan< ElementType, Extent > | Nonowning view to a sequence of contiguous elements |
CSpan< const uint8_t > | |
CSpan< ElementType, SPAN_DYNAMIC_EXTENT > | Span specialization that handle dynamic size |
CSpan< uint8_t > | |
CSpecification | Test specification containing the setup and teardown handlers and test cases |
Cspi_capabilities_t | Describes the capabilities of a SPI peripherals |
Cspi_pinmap_t | |
Cspi_t | Asynch SPI HAL structure |
CSPIMaps | |
CSPINoCSMaps | |
CSPISlaveMaps | |
Cspm_active_msg | |
Cspm_channel_linked_list | |
Cspm_db | |
Cspm_iovec | |
Cspm_ipc_channel | |
Cspm_partition | |
Cspm_partition_db_t | |
Cspm_partition_desc_t | Holds the fields that define a partition for SPM |
Cspm_partition_runtime_data_t | Runtime context information of a partition |
Cspm_partition_static_data_t | Holds the fields of the partition DB used by the SPM code |
Cspm_rot_service | |
Cstat | |
CStaticInterface< Impl, Interface > | Static Interface helper class |
Cstatvfs | |
CSynchronizedIntegral< T > | Thread safe wrapper for integral types |
Ct_cose_crypto_hash | The context for use with the hash adaptation layer here |
Ct_cose_sign1_ctx | This is the context for creating a COSE_Sign1 structure |
CTask< F > | |
CTask< void()> | |
CTask< void(const setup_packet_t *)> | |
►CTaskQueue | TaskQueue |
CPolledQueue | PolledQueue |
CCharacteristicDescriptorDiscovery::TerminationCallbackParams_t | Characteristic descriptor discovery ended event |
Ctest_count_t | |
Ctest_data | |
Ctest_info_t | |
Ctest_status_buffer_t | |
CText | Represent the well known type text |
Ctfm_boot_data | Store the data for the runtime SW |
Ctfm_conn_handle_t | |
Ctfm_event_t | |
Ctfm_exc_stack_t | |
Ctfm_list_node_t | |
Ctfm_msg_body_t | |
Ctfm_msg_queue_t | |
Ctfm_pool_chunk_t | |
Ctfm_pool_instance_t | |
Ctfm_sfn_req_s | |
Ctfm_spm_ipc_partition_t | |
Ctfm_spm_service_db_t | |
Ctfm_spm_service_t | |
Ctfm_state_context | |
Ctfm_state_context_base | |
Ctfm_state_context_ext | |
Ctfm_thrd_ctx | |
Cticker_data_t | Ticker's data structure |
Cticker_event_queue_t | Ticker's event queue structure |
Cticker_event_s | Ticker's event structure |
Cticker_info_t | Information about the ticker implementation |
Cticker_interface_t | Ticker's interface structure - required API for a ticker |
CTimeoutDriftTester< TimeoutTesterType > | |
►CTimeoutType | |
CAttachTester< TimeoutType > | |
CAttachUSTester< TimeoutType > | |
►CTimer | |
CLowPowerTimer | Low power timer |
Ctimer_event_t | Timer object description |
Ctimeval | |
CTransaction< Class > | Transaction class defines a transaction |
Ctransaction_t | Transaction structure |
Ctx_config_params_t | TX configuration parameters |
CTX_Desc | TX Descriptor structure type definition |
CTX_Stat | TX Status structure type definition |
CUARTMaps | |
CUARTNoFCMaps | |
CUARTService | BLE Service to enable UART over BLE |
CUpdateConnectionParametersRequestEvent | Event received when a peer wants to change the connection parameters |
CURI | Model the well known type URI |
CURIBeaconConfigService | UriBeacon Configuration Service |
Cusb_ep_entry_t | |
Cusb_ep_table_t | |
►CUSBPhy | Abstract interface to physical USB hardware |
CUSBPhyHw | |
►CUSBPhyEvents | Event handler for USBPhy |
►CUSBDevice | Core USB Device driver |
CUSBAudio | USBAudio example |
►CUSBCDC | |
CUSBSerial | USBSerial example |
CUSBCDC_ECM | |
CUSBEndpointTester | |
►CUSBHID | USBHID example |
CUSBKeyboard | USBKeyboard example |
CUSBMouse | USBMouse example |
CUSBMouseKeyboard | USBMouseKeyboard example |
CUSBMIDI | USBMIDI example |
►CUSBMSD | USBMSD class: generic class in order to use all kinds of blocks storage chip |
CTestUSBMSD | |
CUSBTester | |
Cuse_gpio_ssel_t | |
Cuseful_buf | The non-const UsefulBuf typically used for some allocated memory that is to be filled in |
Cuseful_buf_c | UsefulBufC and UsefulBuf are simple data structures to hold a pointer and length for a binary data |
Cuseful_input_buf | |
Cuseful_out_buf | UsefulOutBuf is a structure and functions (an object) that are good for serializing data into a buffer such as is often done with network protocols or data written to files |
CUserAllocatedEvent< F, A > | |
CUserAllocatedEvent< F, void(ArgTs...)> | UserAllocatedEvent |
Cutest_v1_scheduler_t | The scheduler interface consists out of the post and cancel functions, which you must implement to use utest |
CUUID | Representation of a Universally Unique Identifier (UUID) |
Cval_api_t | |
Cval_test_info_t | |
Cverify_adr_params_s | Structure used to store ADR values received from network for verification (legality) purposes |
Cwatchdog_config_t | Watchdog configuration |
Cwatchdog_features_t | Watchdog features |
Cwd_param_t | |
Cwhd_custom_ie_info_t | Vendor IE details |
Cwhd_interface_shared_info_t | |
CGap::Whitelist_t | Representation of a whitelist of addresses |
Cwiced_packet_t | |
Cwiced_tcp_server_t | |
Cwiced_tcp_socket_struct | |
Cwiced_udp_socket_struct | |
►CWiFiAccessPoint | WiFiAccessPoint class |
CWhdAccessPoint | WhdAccessPoint class |
CWisunBorderRouter | Wi-SUN Border Router class |
Cwland_ap_data_t | This struct contains ap data, include ssid key and channel |
Cwland_ap_net_data_t | This struct contains ap net data |
Cwland_dhcp_t | |
Cwland_phy_channels_t | |
Cwland_phy_t | |
Cwland_rf_channels_t | |
Cwland_rf_t | |
Cwland_sta_data_t | This struct contains all smartconfig mbed flash parameter |
Cwland_tx_power_t | This struct contains tx power parameter |
Cws_br_info | Struct br_information Border router dynamic information |
Cws_br_route_info | Struct br_route_info is parent child relation structure |
Cws_rpl_info | Struct ws_rpl_info Wi-SUN router RPL information |