Shundo Kishi / MPU6050

ported from https://github.com/jrowberg/i2cdevlib/tree/master/Arduino/MPU6050. Please refer this examples https://developer.mbed.org/users/syundo0730/code/MPU6050_Example/ to run this library in mbed.

Dependencies:   ArduinoSerial I2Cdev

Dependents:   MPU6050_Example

Fork of MPU6050 + MPU9150 by Andreas Kodewitz

Diff: MPU6050.cpp

Revision:
2:f8bfb37b2e1f
Parent:
0:662207e34fba
Child:
3:25e1a5a10e53
--- a/MPU6050.cpp	Wed May 08 00:34:55 2013 +0000
+++ b/MPU6050.cpp	Sun May 12 10:54:50 2013 +0000
@@ -1882,7 +1882,16 @@
 void MPU6050::getMotion9(int16_t* ax, int16_t* ay, int16_t* az, int16_t* gx, int16_t* gy, int16_t* gz, int16_t* mx, int16_t* my, int16_t* mz)
 {
     getMotion6(ax, ay, az, gx, gy, gz);
-    // TODO: magnetometer integration
+    
+    // magnetometer reading
+    i2Cdev.writeByte(devAddr, MPU6050_RA_INT_PIN_CFG, 0x02); //set i2c bypass enable pin to true to access magnetometer
+    wait_ms(10); // necessary wait >=6ms
+    i2Cdev.writeByte(MPU9150_RA_MAG_ADDRESS, 0x0A, 0x01); // enable the magnetometer
+    wait_ms(10); // necessary wait >=6ms
+    i2Cdev.readBytes(MPU9150_RA_MAG_ADDRESS, MPU9150_RA_MAG_XOUT_L, 6, buffer);
+    *mx = (((int16_t)buffer[0]) << 8) | buffer[1];
+    *my = (((int16_t)buffer[2]) << 8) | buffer[3];
+    *mz = (((int16_t)buffer[4]) << 8) | buffer[5];
 }
 /** Get raw 6-axis motion sensor readings (accel/gyro).
  * Retrieves all currently available motion sensor values.
@@ -3250,8 +3259,8 @@
     setMemoryBank(bank);
     setMemoryStartAddress(address);
     uint8_t chunkSize;
-    uint8_t *verifyBuffer;
-    uint8_t *progBuffer;
+    uint8_t *verifyBuffer = NULL;
+    uint8_t *progBuffer = NULL;
     uint16_t i;
     uint8_t j;
     if (verify) verifyBuffer = (uint8_t *)malloc(MPU6050_DMP_MEMORY_CHUNK_SIZE);
@@ -3328,7 +3337,8 @@
 }
 bool MPU6050::writeDMPConfigurationSet(const uint8_t *data, uint16_t dataSize, bool useProgMem)
 {
-    uint8_t *progBuffer, success, special;
+    uint8_t success, special;
+    uint8_t *progBuffer = NULL;
     uint16_t i, j;
     if (useProgMem) {
         progBuffer = (uint8_t *)malloc(8); // assume 8-byte blocks, realloc later if necessary