Diff: driver/uip/EthDev.h

Revision:

0:142ee8b12fef

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/driver/uip/EthDev.h	Wed Jan 30 03:46:05 2013 +0000
@@ -0,0 +1,113 @@
+/*
+ * @file:    EthDev.h
+ * @purpose: Ethernet Device Definitions
+ * @version: V1.10
+ * @date:    24. Feb. 2009
+ *----------------------------------------------------------------------------
+ *
+ * Copyright (C) 2009 ARM Limited. All rights reserved.
+ *
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M3
+ * processor based microcontrollers.  This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ */
+/*
+ * Modified for MiMic by R.Iizuka. 2011.08.27
+ * http://nyatla.jp/mimic
+ */
+
+#ifndef _ETHDEV__H
+#define _ETHDEV__H
+#include "NyLPC_stdlib.h"
+#include "../../uip/NyLPC_uip.h"
+#include "IEthernetDevice.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+
+#ifndef NULL
+ #define NULL   0
+#endif
+
+/*----------------------------------------------------------------------------
+  Ethernet Device Defines
+ *----------------------------------------------------------------------------*/
+#define EthDev_ADDR_SIZE        6                      /*!< Ethernet Address size in bytes */
+#define EthDev_MTU_SIZE         1514                   /*!< Maximum Transmission Unit      */
+
+
+/*----------------------------------------------------------------------------
+  Ethernet Device Configuration and Control Command Defines
+ *----------------------------------------------------------------------------*/
+typedef enum {
+  EthDev_LINK_DOWN              = 0,                   /*!< Ethernet link not established */
+  EthDev_LINK_UP                = 1,                   /*!< Ethernet link established */
+} EthDev_LINK;
+
+typedef enum {
+  EthDev_SPEED_10M              = 0,                   /*!< 10.0 Mbps link speed  */
+  EthDev_SPEED_100M             = 1,                   /*!< 100.0 Mbps link speed */
+  EthDev_SPEED_1000M            = 2,                   /*!< 1.0 Gbps link speed   */
+} EthDev_SPEED;
+
+typedef enum {
+  EthDev_DUPLEX_HALF            = 0,                   /*!< Link half duplex */
+  EthDev_DUPLEX_FULL            = 1,                   /*!< Link full duplex */
+} EthDev_DUPLEX;
+
+typedef enum {
+  EthDev_MODE_AUTO              = 0,
+  EthDev_MODE_10M_FULL          = 1,
+  EthDev_MODE_10M_HALF          = 2,
+  EthDev_MODE_100M_FULL         = 3,
+  EthDev_MODE_100M_HALF         = 4,
+  EthDev_MODE_1000M_FULL        = 5,
+  EthDev_MODE_1000M_HALF        = 6,
+} EthDev_MODE;
+
+typedef struct {
+  EthDev_LINK   Link   : 1;
+  EthDev_DUPLEX Duplex : 1;
+  EthDev_SPEED  Speed  : 2;
+} EthDev_STATUS;
+
+
+/*----------------------------------------------------------------------------
+  Ethernet Device IO Block Structure
+ *----------------------------------------------------------------------------*/
+typedef struct {
+
+   /* Initialized by the user application before call to Init. */
+   EthDev_MODE   Mode;
+   unsigned char HwAddr[EthDev_ADDR_SIZE];
+   void         *(*RxFrame)      (int size);
+   void          (*RxFrameReady) (int size);
+
+   /* Initialized by Ethernet driver. */
+   int           (*Init)       (void);
+   int           (*UnInit)     (void);
+   int           (*SetMCFilter)(int NumHwAddr, unsigned char *pHwAddr);
+   int           (*TxFrame)    (void *pData, int size);
+   void          (*Lock)       (void);
+   void          (*UnLock)     (void);
+   EthDev_STATUS (*LinkChk)    (void);
+} EthDev_IOB;
+
+
+const struct TiEthernetDevice* getEthernetDevicePnP(void);
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif