Driver for CC3000 Wi-Fi module
Dependencies: NVIC_set_all_priorities
Dependents: CC3000_Simple_Socket Wi-Go_IOT_Demo
Information
The current code has been reworked to a full object oriented application and contains an mbed socket compatible API.
CC3000 Wi-Fi module library
Info
This is the low level driver for TI's SimpleLink CC3000 device.
Port from Avnet's Wi-Go KEIL code (based on TI's CC3000 code).
Special thanks to Jim Carver from Avnet for providing the Wi-Go board and for his assistance.
Differences with TI's original code
The code functionality stays exactly the same.
In order to make it easier to use the code, following changes were made :
- Addition of a tool to shift all IRQ priorities to a lower level since it is very important to keep the SPI handler at the highest system priority, the WLAN interrupt the second highest and all other system interrupts at a lower priority, so their handlers can be preempted by the CC3000 interrupts.
- Addition of low level I/O controls and conditional compiler controls in cc3000_common.h.
- CC3000 initialisation, pin declarations, SPI and WLAN irq priorities are set in
Init_HostDriver
, we need to call this function at the start of the main function. - The SPI and HCI code are joined into one file.
- The include list has been rearranged - Only
#include "wlan.h"
is needed in the user API.
- Part of the CC3000's user eeprom memory is used to store additional info (52 bytes in NVMEM_USER_FILE_1):
# bytes | Description | Info |
1 | First time config parameter | Useful when connecting |
2 | Firmware updater version | used with the Firmware update tool |
2 | Service Pack version | used with the Firmware update tool |
3 | Driver Version | used with the Firmware update tool |
3 | Firmware Version | used with the Firmware update tool |
1 | CIK validation (Client Interface Key) | |
40 | CIK data (Client Interface Key) | used with the exosite |
Using the Library
A user API is needed to access the CC3000 functions.
Examples:
- Internet Of Things full WiGo demo (SmartConfig - WebServer - Exosite - Android sensor Fusion App)
- CC3000_Simple_Socket
Using the library with other processors
cc3000_common.cpp
loads the irq tool for all targets:
All current mbed targets are supported by this library.
#include "NVIC_set_all_priorities.h"
All low level settings that need to change are available in cc3000_common.h
//***************************************************************************** // PIN CONTROLS & COMPILE CONTROLS //***************************************************************************** // Compiler control #define CC3000_UNENCRYPTED_SMART_CONFIG // No encryption //#define CC3000_TINY_DRIVER // Driver for small memory model CPUs //Interrupt controls #define NVIC_ALL_IRQ NVIC_set_all_irq_priorities(3); // Set ALL interrupt priorities to level 3 #define NVIC_SPI_IRQ NVIC_SetPriority(SPI0_IRQn, 0x0); // Wi-Fi SPI interrupt must be higher priority than SysTick #define NVIC_PORT_IRQ NVIC_SetPriority(PORTA_IRQn, 0x1); #define NVIC_SYSTICK_IRQ NVIC_SetPriority(SysTick_IRQn, 0x2); // SysTick set to lower priority than Wi-Fi SPI bus interrupt //#define NVIC_ADC_IRQ NVIC_SetPriority(ADC0_IRQn, 0x3); // ADC is the lowest of all // Wlan controls #define WLAN_ISF_PCR PORTA->PCR[16] #define WLAN_ISF_ISFR PORTA->ISFR #define WLAN_ISF_MASK (1<<16) #define WLAN_ASSERT_CS wlan_cs = 0; //CS : active low #define WLAN_DEASSERT_CS wlan_cs = 1; #define WLAN_ASSERT_EN wlan_en = 1; //EN : active high #define WLAN_DEASSERT_EN wlan_en = 0; #define WLAN_READ_IRQ wlan_int #define WLAN_ENABLE_IRQ wlan_int.fall(&WLAN_IRQHandler); #define WLAN_DISABLE_IRQ wlan_int.fall(NULL); #define WLAN_IRQ_PIN_CREATE InterruptIn wlan_int (PTA16); #define WLAN_EN_PIN_CREATE DigitalOut wlan_en (PTA13); #define WLAN_CS_PIN_CREATE DigitalOut wlan_cs (PTD0); #define WLAN_SPI_PORT_CREATE SPI wlan(PTD2, PTD3, PTC5); // mosi, miso, sclk #define WLAN_SPI_PORT_INIT wlan.format(8,1); #define WLAN_SPI_SET_FREQ wlan.frequency(12000000); #define WLAN_SPI_SET_IRQ_HANDLER wlan_int.fall(&WLAN_IRQHandler); #define WLAN_SPI_WRITE wlan.write(*data++); #define WLAN_SPI_READ wlan.write(0x03); // !! DO NOT MODIFY the 0x03 parameter (CC3000 will not respond).
API documentation
Due to a little problem with the links on the mbed site, the API documentation is not directly accessible (will be solved in a next release).
Currently, it is only accessible by adding modules.html
to the API doc link: http://mbed.org/users/frankvnk/code/CC3000_Hostdriver/docs/tip/modules.html
Diff: nvmem.h
- Revision:
- 0:c44f0314d6ec
- Child:
- 1:bbcaf0b2f367
diff -r 000000000000 -r c44f0314d6ec nvmem.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/nvmem.h Fri Jun 28 17:48:37 2013 +0000 @@ -0,0 +1,260 @@ +/***************************************************************************** +* +* nvmem.h - CC3000 Host Driver Implementation. +* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*****************************************************************************/ +#ifndef __NVRAM_H__ +#define __NVRAM_H__ + +//#include "mbed.h" +#include "GlobalAssigns.h" +#include "cc3000_common.h" +#include "hci.h" +#include "socket.h" +#include "evnt_handler.h" + + +/** CC3000 Host driver - NVMEM +* +*/ +//***************************************************************************** +// +// If building with a C++ compiler, make all of the definitions in this header +// have a C binding. +// +//***************************************************************************** +#ifdef __cplusplus +extern "C" { +#endif + + +//***************************************************************************** +// +//! \addtogroup nvmem_api +//! @{ +// +//***************************************************************************** + +/**************************************************************************** +** +** Definitions for File IDs +** +****************************************************************************/ +/* NVMEM file ID - system files*/ +#define NVMEM_NVS_FILEID (0) +#define NVMEM_NVS_SHADOW_FILEID (1) +#define NVMEM_WLAN_CONFIG_FILEID (2) +#define NVMEM_WLAN_CONFIG_SHADOW_FILEID (3) +#define NVMEM_WLAN_DRIVER_SP_FILEID (4) +#define NVMEM_WLAN_FW_SP_FILEID (5) +#define NVMEM_MAC_FILEID (6) +#define NVMEM_FRONTEND_VARS_FILEID (7) +#define NVMEM_IP_CONFIG_FILEID (8) +#define NVMEM_IP_CONFIG_SHADOW_FILEID (9) +#define NVMEM_BOOTLOADER_SP_FILEID (10) +#define NVMEM_RM_FILEID (11) + +/* NVMEM file ID - user files*/ +#define NVMEM_AES128_KEY_FILEID (12) +#define NVMEM_SHARED_MEM_FILEID (13) +#define NVMEM_USER_FILE_1_FILEID (14) +#define NVMEM_USER_FILE_2_FILEID (15) + +/* max entry in order to invalid nvmem */ +#define NVMEM_MAX_ENTRY (16) + + +//***************************************************************************** +// +//! nvmem_read +//! +//! @param ulFileId nvmem file id:\n +//! NVMEM_NVS_FILEID, NVMEM_NVS_SHADOW_FILEID, +//! NVMEM_WLAN_CONFIG_FILEID, NVMEM_WLAN_CONFIG_SHADOW_FILEID, +//! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID, +//! NVMEM_MAC_FILEID, NVMEM_FRONTEND_VARS_FILEID, +//! NVMEM_IP_CONFIG_FILEID, NVMEM_IP_CONFIG_SHADOW_FILEID, +//! NVMEM_BOOTLOADER_SP_FILEID, NVMEM_RM_FILEID, +//! and user files 12-15. +//! @param ulLength number of bytes to read +//! @param ulOffset ulOffset in file from where to read +//! @param buff output buffer pointer +//! +//! @return number of bytes read, otherwise error. +//! +//! @brief Reads data from the file referred by the ulFileId parameter. +//! Reads data from file ulOffset till length. Err if the file can't +//! be used, is invalid, or if the read is out of bounds. +//! +//***************************************************************************** + +extern signed long nvmem_read(unsigned long file_id, unsigned long length, unsigned long offset, unsigned char *buff); + +//***************************************************************************** +// +//! nvmem_write +//! +//! @param ulFileId nvmem file id:\n +//! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID, +//! NVMEM_MAC_FILEID, NVMEM_BOOTLOADER_SP_FILEID, +//! and user files 12-15. +//! @param ulLength number of bytes to write +//! @param ulEntryOffset offset in file to start write operation from +//! @param buff data to write +//! +//! @return on success 0, error otherwise. +//! +//! @brief Write data to nvmem. +//! writes data to file referred by the ulFileId parameter. +//! Writes data to file ulOffset till ulLength.The file id will be +//! marked invalid till the write is done. The file entry doesn't +//! need to be valid - only allocated. +//! +//***************************************************************************** + +extern signed long nvmem_write(unsigned long ulFileId, unsigned long ulLength, unsigned long ulEntryOffset, unsigned char *buff); + + +//***************************************************************************** +// +//! nvmem_set_mac_address +//! +//! @param mac mac address to be set +//! +//! @return on success 0, error otherwise. +//! +//! @brief Write MAC address to EEPROM. +//! mac address as appears over the air (OUI first) +//! +//***************************************************************************** +extern unsigned char nvmem_set_mac_address(unsigned char *mac); + + +//***************************************************************************** +// +//! nvmem_get_mac_address +//! +//! @param[out] mac mac address +//! +//! @return on success 0, error otherwise. +//! +//! @brief Read MAC address from EEPROM. +//! mac address as appears over the air (OUI first) +//! +//***************************************************************************** +extern unsigned char nvmem_get_mac_address(unsigned char *mac); + + +//***************************************************************************** +// +//! nvmem_write_patch +//! +//! @param ulFileId nvmem file id:\n +//! NVMEM_WLAN_DRIVER_SP_FILEID, NVMEM_WLAN_FW_SP_FILEID, +//! @param spLength number of bytes to write +//! @param spData SP data to write +//! +//! @return on success 0, error otherwise. +//! +//! @brief program a patch to a specific file ID. +//! The SP data is assumed to be organized in 2-dimensional. +//! Each line is SP_PORTION_SIZE bytes long. Actual programming is +//! applied in SP_PORTION_SIZE bytes portions. +//! +//***************************************************************************** +extern unsigned char nvmem_write_patch(unsigned long ulFileId, unsigned long spLength, const unsigned char *spData); + + +//***************************************************************************** +// +//! nvmem_read_sp_version +//! +//! @param[out] patchVer first number indicates package ID and the second +//! number indicates package build number +//! +//! @return on success 0, error otherwise. +//! +//! @brief Read patch version. read package version (WiFi FW patch, +//! driver-supplicant-NS patch, bootloader patch) +//! +//***************************************************************************** +#ifndef CC3000_TINY_DRIVER +extern unsigned char nvmem_read_sp_version(unsigned char* patchVer); +#endif + +//***************************************************************************** +// +//! nvmem_create_entry +//! +//! @param ulFileId nvmem file Id:\n +//! * NVMEM_AES128_KEY_FILEID: 12 +//! * NVMEM_SHARED_MEM_FILEID: 13 +//! * and fileIDs 14 and 15 +//! @param ulNewLen entry ulLength +//! +//! @return on success 0, error otherwise. +//! +//! @brief Create new file entry and allocate space on the NVMEM. +//! Applies only to user files. +//! Modify the size of file. +//! If the entry is unallocated - allocate it to size +//! ulNewLen (marked invalid). +//! If it is allocated then deallocate it first. +//! To just mark the file as invalid without resizing - +//! set ulNewLen=0. +//! +//***************************************************************************** +extern signed long nvmem_create_entry(unsigned long file_id, unsigned long newlen); + + +//***************************************************************************** +// +// Mark the end of the C bindings section for C++ compilers. +// +//***************************************************************************** + + +//***************************************************************************** +// +// Close the Doxygen group. +//! @} +// +//***************************************************************************** + + +#ifdef __cplusplus +} +#endif // __cplusplus + +#endif // __NVRAM_H__ + +