Felícito Manzano / RF24

sprintf enable

Fork of RF24 by Akash Vibhute

RF24.cpp@1:00706a42491e, 2015-07-06 (annotated)

Committer:
akashvibhute
Date:
Mon Jul 06 05:16:37 2015 +0000
Revision:
1:00706a42491e
Parent:
0:bb74812ac6bb
Child:
2:3bdf0d9bb71f
RF24 library by maniac, modified to work on mbed nucleo-411

Who changed what in which revision?

UserRevisionLine numberNew contents of line
akashvibhute 0:bb74812ac6bb 1 /*
akashvibhute 0:bb74812ac6bb 2 Copyright (C) 2011 J. Coliz <maniacbug@ymail.com>
akashvibhute 0:bb74812ac6bb 3
akashvibhute 0:bb74812ac6bb 4 This program is free software; you can redistribute it and/or
akashvibhute 0:bb74812ac6bb 5 modify it under the terms of the GNU General Public License
akashvibhute 0:bb74812ac6bb 6 version 2 as published by the Free Software Foundation.
akashvibhute 0:bb74812ac6bb 7 */
akashvibhute 0:bb74812ac6bb 8
akashvibhute 0:bb74812ac6bb 9 #include "RF24.h"
akashvibhute 0:bb74812ac6bb 10
akashvibhute 0:bb74812ac6bb 11 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 12
akashvibhute 0:bb74812ac6bb 13 void RF24::csn(int mode)
akashvibhute 0:bb74812ac6bb 14 {
akashvibhute 0:bb74812ac6bb 15 // Minimum ideal spi bus speed is 2x data rate
akashvibhute 0:bb74812ac6bb 16 // If we assume 2Mbs data rate and 16Mhz clock, a
akashvibhute 0:bb74812ac6bb 17 // divider of 4 is the minimum we want.
akashvibhute 0:bb74812ac6bb 18 // CLK:BUS 8Mhz:2Mhz, 16Mhz:4Mhz, or 20Mhz:5Mhz
akashvibhute 0:bb74812ac6bb 19 //#ifdef ARDUINO
akashvibhute 0:bb74812ac6bb 20 // spi.setBitOrder(MSBFIRST);
akashvibhute 0:bb74812ac6bb 21 // spi.setDataMode(spi_MODE0);
akashvibhute 0:bb74812ac6bb 22 // spi.setClockDivider(spi_CLOCK_DIV4);
akashvibhute 0:bb74812ac6bb 23 //#endif
akashvibhute 0:bb74812ac6bb 24 // digitalWrite(csn_pin,mode);
akashvibhute 0:bb74812ac6bb 25 csn_pin = mode;
akashvibhute 0:bb74812ac6bb 26
akashvibhute 0:bb74812ac6bb 27 }
akashvibhute 0:bb74812ac6bb 28
akashvibhute 0:bb74812ac6bb 29 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 30
akashvibhute 0:bb74812ac6bb 31 void RF24::ce(int level)
akashvibhute 0:bb74812ac6bb 32 {
akashvibhute 0:bb74812ac6bb 33 //digitalWrite(ce_pin,level);
akashvibhute 0:bb74812ac6bb 34 ce_pin = level;
akashvibhute 0:bb74812ac6bb 35 }
akashvibhute 0:bb74812ac6bb 36
akashvibhute 0:bb74812ac6bb 37 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 38
akashvibhute 0:bb74812ac6bb 39 uint8_t RF24::read_register(uint8_t reg, uint8_t* buf, uint8_t len)
akashvibhute 0:bb74812ac6bb 40 {
akashvibhute 0:bb74812ac6bb 41 uint8_t status;
akashvibhute 0:bb74812ac6bb 42
akashvibhute 0:bb74812ac6bb 43 csn(LOW);
akashvibhute 0:bb74812ac6bb 44 status = spi.write( R_REGISTER | ( REGISTER_MASK & reg ) );
akashvibhute 0:bb74812ac6bb 45 while ( len-- )
akashvibhute 0:bb74812ac6bb 46 *buf++ = spi.write(0xff);
akashvibhute 0:bb74812ac6bb 47
akashvibhute 0:bb74812ac6bb 48 csn(HIGH);
akashvibhute 0:bb74812ac6bb 49
akashvibhute 0:bb74812ac6bb 50 return status;
akashvibhute 0:bb74812ac6bb 51 }
akashvibhute 0:bb74812ac6bb 52
akashvibhute 0:bb74812ac6bb 53 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 54
akashvibhute 0:bb74812ac6bb 55 uint8_t RF24::read_register(uint8_t reg)
akashvibhute 0:bb74812ac6bb 56 {
akashvibhute 0:bb74812ac6bb 57 csn(LOW);
akashvibhute 0:bb74812ac6bb 58 spi.write( R_REGISTER | ( REGISTER_MASK & reg ) );
akashvibhute 0:bb74812ac6bb 59 uint8_t result = spi.write(0xff);
akashvibhute 0:bb74812ac6bb 60
akashvibhute 0:bb74812ac6bb 61 csn(HIGH);
akashvibhute 0:bb74812ac6bb 62 return result;
akashvibhute 0:bb74812ac6bb 63 }
akashvibhute 0:bb74812ac6bb 64
akashvibhute 0:bb74812ac6bb 65 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 66
akashvibhute 0:bb74812ac6bb 67 uint8_t RF24::write_register(uint8_t reg, const uint8_t* buf, uint8_t len)
akashvibhute 0:bb74812ac6bb 68 {
akashvibhute 0:bb74812ac6bb 69 uint8_t status;
akashvibhute 0:bb74812ac6bb 70
akashvibhute 0:bb74812ac6bb 71 csn(LOW);
akashvibhute 0:bb74812ac6bb 72 status = spi.write( W_REGISTER | ( REGISTER_MASK & reg ) );
akashvibhute 0:bb74812ac6bb 73 while ( len-- )
akashvibhute 0:bb74812ac6bb 74 spi.write(*buf++);
akashvibhute 0:bb74812ac6bb 75
akashvibhute 0:bb74812ac6bb 76 csn(HIGH);
akashvibhute 0:bb74812ac6bb 77
akashvibhute 0:bb74812ac6bb 78 return status;
akashvibhute 0:bb74812ac6bb 79 }
akashvibhute 0:bb74812ac6bb 80
akashvibhute 0:bb74812ac6bb 81 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 82
akashvibhute 0:bb74812ac6bb 83 uint8_t RF24::write_register(uint8_t reg, uint8_t value)
akashvibhute 0:bb74812ac6bb 84 {
akashvibhute 0:bb74812ac6bb 85 uint8_t status;
akashvibhute 0:bb74812ac6bb 86
akashvibhute 0:bb74812ac6bb 87 // IF_SERIAL_DEBUG(printf(("write_register(%02x,%02x)\r\n"),reg,value));
akashvibhute 0:bb74812ac6bb 88
akashvibhute 0:bb74812ac6bb 89 csn(LOW);
akashvibhute 0:bb74812ac6bb 90 status = spi.write( W_REGISTER | ( REGISTER_MASK & reg ) );
akashvibhute 0:bb74812ac6bb 91 spi.write(value);
akashvibhute 0:bb74812ac6bb 92 csn(HIGH);
akashvibhute 0:bb74812ac6bb 93
akashvibhute 0:bb74812ac6bb 94 return status;
akashvibhute 0:bb74812ac6bb 95 }
akashvibhute 0:bb74812ac6bb 96
akashvibhute 0:bb74812ac6bb 97 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 98
akashvibhute 0:bb74812ac6bb 99 uint8_t RF24::write_payload(const void* buf, uint8_t len)
akashvibhute 0:bb74812ac6bb 100 {
akashvibhute 0:bb74812ac6bb 101 uint8_t status;
akashvibhute 0:bb74812ac6bb 102
akashvibhute 0:bb74812ac6bb 103 const uint8_t* current = reinterpret_cast<const uint8_t*>(buf);
akashvibhute 0:bb74812ac6bb 104
akashvibhute 0:bb74812ac6bb 105 uint8_t data_len = min(len,payload_size);
akashvibhute 0:bb74812ac6bb 106 uint8_t blank_len = dynamic_payloads_enabled ? 0 : payload_size - data_len;
akashvibhute 0:bb74812ac6bb 107
akashvibhute 0:bb74812ac6bb 108 //printf("[Writing %u bytes %u blanks]",data_len,blank_len);
akashvibhute 0:bb74812ac6bb 109
akashvibhute 0:bb74812ac6bb 110 csn(LOW);
akashvibhute 0:bb74812ac6bb 111 status = spi.write( W_TX_PAYLOAD );
akashvibhute 0:bb74812ac6bb 112 while ( data_len-- )
akashvibhute 0:bb74812ac6bb 113 spi.write(*current++);
akashvibhute 0:bb74812ac6bb 114 while ( blank_len-- )
akashvibhute 0:bb74812ac6bb 115 spi.write(0);
akashvibhute 0:bb74812ac6bb 116 csn(HIGH);
akashvibhute 0:bb74812ac6bb 117
akashvibhute 0:bb74812ac6bb 118 return status;
akashvibhute 0:bb74812ac6bb 119 }
akashvibhute 0:bb74812ac6bb 120
akashvibhute 0:bb74812ac6bb 121 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 122
akashvibhute 0:bb74812ac6bb 123 uint8_t RF24::read_payload(void* buf, uint8_t len)
akashvibhute 0:bb74812ac6bb 124 {
akashvibhute 0:bb74812ac6bb 125 uint8_t status;
akashvibhute 0:bb74812ac6bb 126 uint8_t* current = reinterpret_cast<uint8_t*>(buf);
akashvibhute 0:bb74812ac6bb 127
akashvibhute 0:bb74812ac6bb 128 uint8_t data_len = min(len,payload_size);
akashvibhute 0:bb74812ac6bb 129 uint8_t blank_len = dynamic_payloads_enabled ? 0 : payload_size - data_len;
akashvibhute 0:bb74812ac6bb 130
akashvibhute 0:bb74812ac6bb 131 //printf("[Reading %u bytes %u blanks]",data_len,blank_len);
akashvibhute 0:bb74812ac6bb 132
akashvibhute 0:bb74812ac6bb 133 csn(LOW);
akashvibhute 0:bb74812ac6bb 134 status = spi.write( R_RX_PAYLOAD );
akashvibhute 0:bb74812ac6bb 135 while ( data_len-- )
akashvibhute 0:bb74812ac6bb 136 *current++ = spi.write(0xff);
akashvibhute 0:bb74812ac6bb 137 while ( blank_len-- )
akashvibhute 0:bb74812ac6bb 138 spi.write(0xff);
akashvibhute 0:bb74812ac6bb 139 csn(HIGH);
akashvibhute 0:bb74812ac6bb 140
akashvibhute 0:bb74812ac6bb 141 return status;
akashvibhute 0:bb74812ac6bb 142 }
akashvibhute 0:bb74812ac6bb 143
akashvibhute 0:bb74812ac6bb 144 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 145
akashvibhute 0:bb74812ac6bb 146 uint8_t RF24::flush_rx(void)
akashvibhute 0:bb74812ac6bb 147 {
akashvibhute 0:bb74812ac6bb 148 uint8_t status;
akashvibhute 0:bb74812ac6bb 149
akashvibhute 0:bb74812ac6bb 150 csn(LOW);
akashvibhute 0:bb74812ac6bb 151 status = spi.write( FLUSH_RX );
akashvibhute 0:bb74812ac6bb 152 csn(HIGH);
akashvibhute 0:bb74812ac6bb 153
akashvibhute 0:bb74812ac6bb 154 return status;
akashvibhute 0:bb74812ac6bb 155 }
akashvibhute 0:bb74812ac6bb 156
akashvibhute 0:bb74812ac6bb 157 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 158
akashvibhute 0:bb74812ac6bb 159 uint8_t RF24::flush_tx(void)
akashvibhute 0:bb74812ac6bb 160 {
akashvibhute 0:bb74812ac6bb 161 uint8_t status;
akashvibhute 0:bb74812ac6bb 162
akashvibhute 0:bb74812ac6bb 163 csn(LOW);
akashvibhute 0:bb74812ac6bb 164 status = spi.write( FLUSH_TX );
akashvibhute 0:bb74812ac6bb 165 csn(HIGH);
akashvibhute 0:bb74812ac6bb 166
akashvibhute 0:bb74812ac6bb 167 return status;
akashvibhute 0:bb74812ac6bb 168 }
akashvibhute 0:bb74812ac6bb 169
akashvibhute 0:bb74812ac6bb 170 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 171
akashvibhute 0:bb74812ac6bb 172 uint8_t RF24::get_status(void)
akashvibhute 0:bb74812ac6bb 173 {
akashvibhute 0:bb74812ac6bb 174 uint8_t status;
akashvibhute 0:bb74812ac6bb 175
akashvibhute 0:bb74812ac6bb 176 csn(LOW);
akashvibhute 0:bb74812ac6bb 177 status = spi.write( NOP );
akashvibhute 0:bb74812ac6bb 178 csn(HIGH);
akashvibhute 0:bb74812ac6bb 179
akashvibhute 0:bb74812ac6bb 180 return status;
akashvibhute 0:bb74812ac6bb 181 }
akashvibhute 0:bb74812ac6bb 182
akashvibhute 0:bb74812ac6bb 183 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 184
akashvibhute 0:bb74812ac6bb 185 void RF24::print_status(uint8_t status)
akashvibhute 0:bb74812ac6bb 186 {
akashvibhute 0:bb74812ac6bb 187 printf(("STATUS\t\t = 0x%02x RX_DR=%x TX_DS=%x MAX_RT=%x RX_P_NO=%x TX_FULL=%x\r\n"),
akashvibhute 0:bb74812ac6bb 188 status,
akashvibhute 0:bb74812ac6bb 189 (status & _BV(RX_DR))?1:0,
akashvibhute 0:bb74812ac6bb 190 (status & _BV(TX_DS))?1:0,
akashvibhute 0:bb74812ac6bb 191 (status & _BV(MAX_RT))?1:0,
akashvibhute 0:bb74812ac6bb 192 ((status >> RX_P_NO) & 7),
akashvibhute 0:bb74812ac6bb 193 (status & _BV(TX_FULL))?1:0
akashvibhute 0:bb74812ac6bb 194 );
akashvibhute 0:bb74812ac6bb 195 }
akashvibhute 0:bb74812ac6bb 196
akashvibhute 0:bb74812ac6bb 197 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 198
akashvibhute 0:bb74812ac6bb 199 void RF24::print_observe_tx(uint8_t value)
akashvibhute 0:bb74812ac6bb 200 {
akashvibhute 0:bb74812ac6bb 201 printf(("OBSERVE_TX=%02x: POLS_CNT=%x ARC_CNT=%x\r\n"),
akashvibhute 0:bb74812ac6bb 202 value,
akashvibhute 0:bb74812ac6bb 203 (value >> PLOS_CNT) & 15,
akashvibhute 0:bb74812ac6bb 204 (value >> ARC_CNT) & 15
akashvibhute 0:bb74812ac6bb 205 );
akashvibhute 0:bb74812ac6bb 206 }
akashvibhute 0:bb74812ac6bb 207
akashvibhute 0:bb74812ac6bb 208 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 209
akashvibhute 0:bb74812ac6bb 210 void RF24::print_byte_register(const char* name, uint8_t reg, uint8_t qty)
akashvibhute 0:bb74812ac6bb 211 {
akashvibhute 0:bb74812ac6bb 212 // char extra_tab = strlen(name) < 8 ? '\t' : 0;
akashvibhute 0:bb74812ac6bb 213 printf("%s =",name);
akashvibhute 0:bb74812ac6bb 214 while (qty--)
akashvibhute 0:bb74812ac6bb 215 printf((" 0x%02x"),read_register(reg++));
akashvibhute 0:bb74812ac6bb 216 printf(("\r\n"));
akashvibhute 0:bb74812ac6bb 217 }
akashvibhute 0:bb74812ac6bb 218
akashvibhute 0:bb74812ac6bb 219 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 220
akashvibhute 0:bb74812ac6bb 221 void RF24::print_address_register(const char* name, uint8_t reg, uint8_t qty)
akashvibhute 0:bb74812ac6bb 222 {
akashvibhute 0:bb74812ac6bb 223 // char extra_tab = strlen_P(name) < 8 ? '\t' : 0;
akashvibhute 0:bb74812ac6bb 224 printf("%s =",name);
akashvibhute 0:bb74812ac6bb 225
akashvibhute 0:bb74812ac6bb 226 while (qty--)
akashvibhute 0:bb74812ac6bb 227 {
akashvibhute 0:bb74812ac6bb 228 uint8_t buffer[5];
akashvibhute 0:bb74812ac6bb 229 read_register(reg++,buffer,sizeof buffer);
akashvibhute 0:bb74812ac6bb 230
akashvibhute 0:bb74812ac6bb 231 printf((" 0x"));
akashvibhute 0:bb74812ac6bb 232 uint8_t* bufptr = buffer + sizeof buffer;
akashvibhute 0:bb74812ac6bb 233 while( --bufptr >= buffer )
akashvibhute 0:bb74812ac6bb 234 printf(("%02x"),*bufptr);
akashvibhute 0:bb74812ac6bb 235 }
akashvibhute 0:bb74812ac6bb 236
akashvibhute 0:bb74812ac6bb 237 printf(("\r\n"));
akashvibhute 0:bb74812ac6bb 238 }
akashvibhute 0:bb74812ac6bb 239
akashvibhute 0:bb74812ac6bb 240 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 241
akashvibhute 0:bb74812ac6bb 242 RF24::RF24(PinName mosi, PinName miso, PinName sck, PinName _csnpin, PinName _cepin):
akashvibhute 0:bb74812ac6bb 243 ce_pin(_cepin), csn_pin(_csnpin), wide_band(true), p_variant(false),
akashvibhute 0:bb74812ac6bb 244 payload_size(32), ack_payload_available(false), dynamic_payloads_enabled(false),
akashvibhute 0:bb74812ac6bb 245 pipe0_reading_address(0), spi(mosi, miso, sck)
akashvibhute 0:bb74812ac6bb 246 {
akashvibhute 0:bb74812ac6bb 247 spi.frequency(10000000/5); // 2Mbit, 1/5th the maximum transfer rate for the spi bus
akashvibhute 0:bb74812ac6bb 248 spi.format(8,0); // 8-bit, ClockPhase = 0, ClockPolarity = 0
akashvibhute 0:bb74812ac6bb 249 wait_ms(100);
akashvibhute 0:bb74812ac6bb 250 }
akashvibhute 0:bb74812ac6bb 251
akashvibhute 0:bb74812ac6bb 252 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 253
akashvibhute 0:bb74812ac6bb 254 void RF24::setChannel(uint8_t channel)
akashvibhute 0:bb74812ac6bb 255 {
akashvibhute 0:bb74812ac6bb 256 // TODO: This method could take advantage of the 'wide_band' calculation
akashvibhute 0:bb74812ac6bb 257 // done in setChannel() to require certain channel spacing.
akashvibhute 0:bb74812ac6bb 258
akashvibhute 0:bb74812ac6bb 259 const uint8_t max_channel = 127;
akashvibhute 0:bb74812ac6bb 260 write_register(RF_CH,min(channel,max_channel));
akashvibhute 0:bb74812ac6bb 261 }
akashvibhute 0:bb74812ac6bb 262
akashvibhute 0:bb74812ac6bb 263 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 264
akashvibhute 0:bb74812ac6bb 265 void RF24::setPayloadSize(uint8_t size)
akashvibhute 0:bb74812ac6bb 266 {
akashvibhute 0:bb74812ac6bb 267 const uint8_t max_payload_size = 32;
akashvibhute 0:bb74812ac6bb 268 payload_size = min(size,max_payload_size);
akashvibhute 0:bb74812ac6bb 269 }
akashvibhute 0:bb74812ac6bb 270
akashvibhute 0:bb74812ac6bb 271 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 272
akashvibhute 0:bb74812ac6bb 273 uint8_t RF24::getPayloadSize(void)
akashvibhute 0:bb74812ac6bb 274 {
akashvibhute 0:bb74812ac6bb 275 return payload_size;
akashvibhute 0:bb74812ac6bb 276 }
akashvibhute 0:bb74812ac6bb 277
akashvibhute 0:bb74812ac6bb 278 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 279
akashvibhute 0:bb74812ac6bb 280 static const char rf24_datarate_e_str_0[] = "1MBPS";
akashvibhute 0:bb74812ac6bb 281 static const char rf24_datarate_e_str_1[] = "2MBPS";
akashvibhute 0:bb74812ac6bb 282 static const char rf24_datarate_e_str_2[] = "250KBPS";
akashvibhute 0:bb74812ac6bb 283 static const char * const rf24_datarate_e_str_P[] = {
akashvibhute 0:bb74812ac6bb 284 rf24_datarate_e_str_0,
akashvibhute 0:bb74812ac6bb 285 rf24_datarate_e_str_1,
akashvibhute 0:bb74812ac6bb 286 rf24_datarate_e_str_2,
akashvibhute 0:bb74812ac6bb 287 };
akashvibhute 0:bb74812ac6bb 288 static const char rf24_model_e_str_0[] = "nRF24L01";
akashvibhute 0:bb74812ac6bb 289 static const char rf24_model_e_str_1[] = "nRF24L01+";
akashvibhute 0:bb74812ac6bb 290 static const char * const rf24_model_e_str_P[] = {
akashvibhute 0:bb74812ac6bb 291 rf24_model_e_str_0,
akashvibhute 0:bb74812ac6bb 292 rf24_model_e_str_1,
akashvibhute 0:bb74812ac6bb 293 };
akashvibhute 0:bb74812ac6bb 294 static const char rf24_crclength_e_str_0[] = "Disabled";
akashvibhute 0:bb74812ac6bb 295 static const char rf24_crclength_e_str_1[] = "8 bits";
akashvibhute 0:bb74812ac6bb 296 static const char rf24_crclength_e_str_2[] = "16 bits" ;
akashvibhute 0:bb74812ac6bb 297 static const char * const rf24_crclength_e_str_P[] = {
akashvibhute 0:bb74812ac6bb 298 rf24_crclength_e_str_0,
akashvibhute 0:bb74812ac6bb 299 rf24_crclength_e_str_1,
akashvibhute 0:bb74812ac6bb 300 rf24_crclength_e_str_2,
akashvibhute 0:bb74812ac6bb 301 };
akashvibhute 0:bb74812ac6bb 302 static const char rf24_pa_dbm_e_str_0[] = "PA_MIN";
akashvibhute 0:bb74812ac6bb 303 static const char rf24_pa_dbm_e_str_1[] = "PA_LOW";
akashvibhute 0:bb74812ac6bb 304 static const char rf24_pa_dbm_e_str_2[] = "PA_MED";
akashvibhute 0:bb74812ac6bb 305 static const char rf24_pa_dbm_e_str_3[] = "PA_HIGH";
akashvibhute 0:bb74812ac6bb 306 static const char * const rf24_pa_dbm_e_str_P[] = {
akashvibhute 0:bb74812ac6bb 307 rf24_pa_dbm_e_str_0,
akashvibhute 0:bb74812ac6bb 308 rf24_pa_dbm_e_str_1,
akashvibhute 0:bb74812ac6bb 309 rf24_pa_dbm_e_str_2,
akashvibhute 0:bb74812ac6bb 310 rf24_pa_dbm_e_str_3,
akashvibhute 0:bb74812ac6bb 311 };
akashvibhute 0:bb74812ac6bb 312
akashvibhute 0:bb74812ac6bb 313 void RF24::printDetails(void)
akashvibhute 0:bb74812ac6bb 314 {
akashvibhute 0:bb74812ac6bb 315 print_status(get_status());
akashvibhute 0:bb74812ac6bb 316
akashvibhute 0:bb74812ac6bb 317 print_address_register(("RX_ADDR_P0-1"),RX_ADDR_P0,2);
akashvibhute 0:bb74812ac6bb 318 print_byte_register(("RX_ADDR_P2-5"),RX_ADDR_P2,4);
akashvibhute 0:bb74812ac6bb 319 print_address_register(("TX_ADDR"),TX_ADDR);
akashvibhute 0:bb74812ac6bb 320
akashvibhute 0:bb74812ac6bb 321 print_byte_register(("RX_PW_P0-6"),RX_PW_P0,6);
akashvibhute 0:bb74812ac6bb 322 print_byte_register(("EN_AA"),EN_AA);
akashvibhute 0:bb74812ac6bb 323 print_byte_register(("EN_RXADDR"),EN_RXADDR);
akashvibhute 0:bb74812ac6bb 324 print_byte_register(("RF_CH"),RF_CH);
akashvibhute 0:bb74812ac6bb 325 print_byte_register(("RF_SETUP"),RF_SETUP);
akashvibhute 0:bb74812ac6bb 326 print_byte_register(("CONFIG"),CONFIG);
akashvibhute 0:bb74812ac6bb 327 print_byte_register(("DYNPD/FEATURE"),DYNPD,2);
akashvibhute 0:bb74812ac6bb 328
akashvibhute 0:bb74812ac6bb 329 printf(("Data Rate\t = %s\r\n"), rf24_datarate_e_str_P[getDataRate()]);
akashvibhute 0:bb74812ac6bb 330 printf(("Model\t\t = %s\r\n"), rf24_model_e_str_P[isPVariant()]);
akashvibhute 0:bb74812ac6bb 331 printf(("CRC Length\t = %s\r\n"),rf24_crclength_e_str_P[getCRCLength()]);
akashvibhute 0:bb74812ac6bb 332 printf(("PA Power\t = %s\r\n"),rf24_pa_dbm_e_str_P[getPALevel()]);
akashvibhute 0:bb74812ac6bb 333 }
akashvibhute 0:bb74812ac6bb 334
akashvibhute 0:bb74812ac6bb 335 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 336
akashvibhute 0:bb74812ac6bb 337 void RF24::begin(void)
akashvibhute 0:bb74812ac6bb 338 {
akashvibhute 0:bb74812ac6bb 339 // Initialize pins
akashvibhute 0:bb74812ac6bb 340 // pinMode(ce_pin,OUTPUT);
akashvibhute 0:bb74812ac6bb 341 // pinMode(csn_pin,OUTPUT);
akashvibhute 0:bb74812ac6bb 342
akashvibhute 0:bb74812ac6bb 343 // Initialize spi bus
akashvibhute 0:bb74812ac6bb 344 //spi.begin();
akashvibhute 0:bb74812ac6bb 345 mainTimer.start();
akashvibhute 0:bb74812ac6bb 346
akashvibhute 0:bb74812ac6bb 347 ce(LOW);
akashvibhute 0:bb74812ac6bb 348 csn(HIGH);
akashvibhute 0:bb74812ac6bb 349
akashvibhute 0:bb74812ac6bb 350 // Must allow the radio time to settle else configuration bits will not necessarily stick.
akashvibhute 0:bb74812ac6bb 351 // This is actually only required following power up but some settling time also appears to
akashvibhute 0:bb74812ac6bb 352 // be required after resets too. For full coverage, we'll always assume the worst.
akashvibhute 0:bb74812ac6bb 353 // Enabling 16b CRC is by far the most obvious case if the wrong timing is used - or skipped.
akashvibhute 0:bb74812ac6bb 354 // Technically we require 4.5ms + 14us as a worst case. We'll just call it 5ms for good measure.
akashvibhute 0:bb74812ac6bb 355 // WARNING: wait_ms is based on P-variant whereby non-P *may* require different timing.
akashvibhute 0:bb74812ac6bb 356 wait_ms( 5 ) ;
akashvibhute 0:bb74812ac6bb 357
akashvibhute 0:bb74812ac6bb 358 // Set 1500uS (minimum for 32B payload in ESB@250KBPS) timeouts, to make testing a little easier
akashvibhute 0:bb74812ac6bb 359 // WARNING: If this is ever lowered, either 250KBS mode with AA is broken or maximum packet
akashvibhute 0:bb74812ac6bb 360 // sizes must never be used. See documentation for a more complete explanation.
akashvibhute 0:bb74812ac6bb 361 write_register(SETUP_RETR,(4 << ARD) | (15 << ARC));
akashvibhute 0:bb74812ac6bb 362
akashvibhute 0:bb74812ac6bb 363 // Restore our default PA level
akashvibhute 0:bb74812ac6bb 364 setPALevel( RF24_PA_MAX ) ;
akashvibhute 0:bb74812ac6bb 365
akashvibhute 0:bb74812ac6bb 366 // Determine if this is a p or non-p RF24 module and then
akashvibhute 0:bb74812ac6bb 367 // reset our data rate back to default value. This works
akashvibhute 0:bb74812ac6bb 368 // because a non-P variant won't allow the data rate to
akashvibhute 0:bb74812ac6bb 369 // be set to 250Kbps.
akashvibhute 0:bb74812ac6bb 370 if( setDataRate( RF24_250KBPS ) )
akashvibhute 0:bb74812ac6bb 371 {
akashvibhute 0:bb74812ac6bb 372 p_variant = true ;
akashvibhute 0:bb74812ac6bb 373 }
akashvibhute 0:bb74812ac6bb 374
akashvibhute 0:bb74812ac6bb 375 // Then set the data rate to the slowest (and most reliable) speed supported by all
akashvibhute 0:bb74812ac6bb 376 // hardware.
akashvibhute 0:bb74812ac6bb 377 setDataRate( RF24_1MBPS ) ;
akashvibhute 0:bb74812ac6bb 378
akashvibhute 0:bb74812ac6bb 379 // Initialize CRC and request 2-byte (16bit) CRC
akashvibhute 0:bb74812ac6bb 380 setCRCLength( RF24_CRC_16 ) ;
akashvibhute 0:bb74812ac6bb 381
akashvibhute 0:bb74812ac6bb 382 // Disable dynamic payloads, to match dynamic_payloads_enabled setting
akashvibhute 0:bb74812ac6bb 383 write_register(DYNPD,0);
akashvibhute 0:bb74812ac6bb 384
akashvibhute 0:bb74812ac6bb 385 // Reset current status
akashvibhute 0:bb74812ac6bb 386 // Notice reset and flush is the last thing we do
akashvibhute 0:bb74812ac6bb 387 write_register(STATUS,_BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) );
akashvibhute 0:bb74812ac6bb 388
akashvibhute 0:bb74812ac6bb 389 // Set up default configuration. Callers can always change it later.
akashvibhute 0:bb74812ac6bb 390 // This channel should be universally safe and not bleed over into adjacent
akashvibhute 0:bb74812ac6bb 391 // spectrum.
akashvibhute 1:00706a42491e 392 setChannel(76);
akashvibhute 1:00706a42491e 393 //setChannel(90);
akashvibhute 0:bb74812ac6bb 394
akashvibhute 0:bb74812ac6bb 395 // Flush buffers
akashvibhute 0:bb74812ac6bb 396 flush_rx();
akashvibhute 0:bb74812ac6bb 397 flush_tx();
akashvibhute 0:bb74812ac6bb 398
akashvibhute 0:bb74812ac6bb 399 // set EN_RXADDRR to 0 to fix pipe 0 from receiving
akashvibhute 0:bb74812ac6bb 400 write_register(EN_RXADDR, 0);
akashvibhute 0:bb74812ac6bb 401 }
akashvibhute 0:bb74812ac6bb 402
akashvibhute 0:bb74812ac6bb 403 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 404
akashvibhute 0:bb74812ac6bb 405 void RF24::startListening(void)
akashvibhute 0:bb74812ac6bb 406 {
akashvibhute 0:bb74812ac6bb 407 write_register(CONFIG, read_register(CONFIG) | _BV(PWR_UP) | _BV(PRIM_RX));
akashvibhute 0:bb74812ac6bb 408 write_register(STATUS, _BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) );
akashvibhute 0:bb74812ac6bb 409
akashvibhute 0:bb74812ac6bb 410 // Restore the pipe0 adddress, if exists
akashvibhute 0:bb74812ac6bb 411 if (pipe0_reading_address)
akashvibhute 0:bb74812ac6bb 412 write_register(RX_ADDR_P0, reinterpret_cast<const uint8_t*>(&pipe0_reading_address), 5);
akashvibhute 0:bb74812ac6bb 413
akashvibhute 0:bb74812ac6bb 414 // Flush buffers
akashvibhute 0:bb74812ac6bb 415 flush_rx();
akashvibhute 0:bb74812ac6bb 416 flush_tx();
akashvibhute 0:bb74812ac6bb 417
akashvibhute 0:bb74812ac6bb 418 // Go!
akashvibhute 0:bb74812ac6bb 419 ce(HIGH);
akashvibhute 0:bb74812ac6bb 420
akashvibhute 0:bb74812ac6bb 421 // wait for the radio to come up (130us actually only needed)
akashvibhute 0:bb74812ac6bb 422 // wait_msMicroseconds(130);
akashvibhute 0:bb74812ac6bb 423 wait_us(130);
akashvibhute 0:bb74812ac6bb 424 }
akashvibhute 0:bb74812ac6bb 425
akashvibhute 0:bb74812ac6bb 426 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 427
akashvibhute 0:bb74812ac6bb 428 void RF24::stopListening(void)
akashvibhute 0:bb74812ac6bb 429 {
akashvibhute 0:bb74812ac6bb 430 ce(LOW);
akashvibhute 0:bb74812ac6bb 431 flush_tx();
akashvibhute 0:bb74812ac6bb 432 flush_rx();
akashvibhute 0:bb74812ac6bb 433 }
akashvibhute 0:bb74812ac6bb 434
akashvibhute 0:bb74812ac6bb 435 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 436
akashvibhute 0:bb74812ac6bb 437 void RF24::powerDown(void)
akashvibhute 0:bb74812ac6bb 438 {
akashvibhute 0:bb74812ac6bb 439 write_register(CONFIG,read_register(CONFIG) & ~_BV(PWR_UP));
akashvibhute 0:bb74812ac6bb 440 }
akashvibhute 0:bb74812ac6bb 441
akashvibhute 0:bb74812ac6bb 442 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 443
akashvibhute 0:bb74812ac6bb 444 void RF24::powerUp(void)
akashvibhute 0:bb74812ac6bb 445 {
akashvibhute 0:bb74812ac6bb 446 write_register(CONFIG,read_register(CONFIG) | _BV(PWR_UP));
akashvibhute 0:bb74812ac6bb 447 }
akashvibhute 0:bb74812ac6bb 448
akashvibhute 0:bb74812ac6bb 449 /******************************************************************/
akashvibhute 0:bb74812ac6bb 450
akashvibhute 0:bb74812ac6bb 451 bool RF24::write( const void* buf, uint8_t len )
akashvibhute 0:bb74812ac6bb 452 {
akashvibhute 0:bb74812ac6bb 453 bool result = false;
akashvibhute 0:bb74812ac6bb 454
akashvibhute 0:bb74812ac6bb 455 // Begin the write
akashvibhute 0:bb74812ac6bb 456 startWrite(buf,len);
akashvibhute 0:bb74812ac6bb 457
akashvibhute 0:bb74812ac6bb 458 // ------------
akashvibhute 0:bb74812ac6bb 459 // At this point we could return from a non-blocking write, and then call
akashvibhute 0:bb74812ac6bb 460 // the rest after an interrupt
akashvibhute 0:bb74812ac6bb 461
akashvibhute 0:bb74812ac6bb 462 // Instead, we are going to block here until we get TX_DS (transmission completed and ack'd)
akashvibhute 0:bb74812ac6bb 463 // or MAX_RT (maximum retries, transmission failed). Also, we'll timeout in case the radio
akashvibhute 0:bb74812ac6bb 464 // is flaky and we get neither.
akashvibhute 0:bb74812ac6bb 465
akashvibhute 0:bb74812ac6bb 466 // IN the end, the send should be blocking. It comes back in 60ms worst case, or much faster
akashvibhute 0:bb74812ac6bb 467 // if I tighted up the retry logic. (Default settings will be 1500us.
akashvibhute 0:bb74812ac6bb 468 // Monitor the send
akashvibhute 0:bb74812ac6bb 469 uint8_t observe_tx;
akashvibhute 0:bb74812ac6bb 470 uint8_t status;
akashvibhute 0:bb74812ac6bb 471 uint32_t sent_at = mainTimer.read_ms();
akashvibhute 0:bb74812ac6bb 472 const uint32_t timeout = 500; //ms to wait for timeout
akashvibhute 0:bb74812ac6bb 473 do
akashvibhute 0:bb74812ac6bb 474 {
akashvibhute 0:bb74812ac6bb 475 status = read_register(OBSERVE_TX,&observe_tx,1);
akashvibhute 0:bb74812ac6bb 476 // IF_SERIAL_DEBUG(Serial.print(observe_tx,HEX));
akashvibhute 0:bb74812ac6bb 477 }
akashvibhute 0:bb74812ac6bb 478 while( ! ( status & ( _BV(TX_DS) | _BV(MAX_RT) ) ) && ( mainTimer.read_ms() - sent_at < timeout ) );
akashvibhute 0:bb74812ac6bb 479
akashvibhute 0:bb74812ac6bb 480 // The part above is what you could recreate with your own interrupt handler,
akashvibhute 0:bb74812ac6bb 481 // and then call this when you got an interrupt
akashvibhute 0:bb74812ac6bb 482 // ------------
akashvibhute 0:bb74812ac6bb 483
akashvibhute 0:bb74812ac6bb 484 // Call this when you get an interrupt
akashvibhute 0:bb74812ac6bb 485 // The status tells us three things
akashvibhute 0:bb74812ac6bb 486 // * The send was successful (TX_DS)
akashvibhute 0:bb74812ac6bb 487 // * The send failed, too many retries (MAX_RT)
akashvibhute 0:bb74812ac6bb 488 // * There is an ack packet waiting (RX_DR)
akashvibhute 0:bb74812ac6bb 489 bool tx_ok, tx_fail;
akashvibhute 0:bb74812ac6bb 490 whatHappened(tx_ok,tx_fail,ack_payload_available);
akashvibhute 0:bb74812ac6bb 491
akashvibhute 0:bb74812ac6bb 492 //printf("%u%u%u\r\n",tx_ok,tx_fail,ack_payload_available);
akashvibhute 0:bb74812ac6bb 493
akashvibhute 0:bb74812ac6bb 494 result = tx_ok;
akashvibhute 0:bb74812ac6bb 495 // IF_SERIAL_DEBUG(Serial.print(result?"...OK.":"...Failed"));
akashvibhute 0:bb74812ac6bb 496
akashvibhute 0:bb74812ac6bb 497 // Handle the ack packet
akashvibhute 0:bb74812ac6bb 498 if ( ack_payload_available )
akashvibhute 0:bb74812ac6bb 499 {
akashvibhute 0:bb74812ac6bb 500 ack_payload_length = getDynamicPayloadSize();
akashvibhute 0:bb74812ac6bb 501 // IF_SERIAL_DEBUG(Serial.print("[AckPacket]/"));
akashvibhute 0:bb74812ac6bb 502 // IF_SERIAL_DEBUG(Serial.println(ack_payload_length,DEC));
akashvibhute 0:bb74812ac6bb 503 }
akashvibhute 0:bb74812ac6bb 504
akashvibhute 0:bb74812ac6bb 505 // Yay, we are done.
akashvibhute 0:bb74812ac6bb 506
akashvibhute 0:bb74812ac6bb 507 // Power down
akashvibhute 0:bb74812ac6bb 508 // powerDown();
akashvibhute 0:bb74812ac6bb 509
akashvibhute 0:bb74812ac6bb 510 // Flush buffers (Is this a relic of past experimentation, and not needed anymore?
akashvibhute 0:bb74812ac6bb 511 // flush_tx();
akashvibhute 0:bb74812ac6bb 512
akashvibhute 0:bb74812ac6bb 513 return result;
akashvibhute 0:bb74812ac6bb 514 }
akashvibhute 0:bb74812ac6bb 515 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 516
akashvibhute 0:bb74812ac6bb 517 void RF24::startWrite( const void* buf, uint8_t len )
akashvibhute 0:bb74812ac6bb 518 {
akashvibhute 0:bb74812ac6bb 519 // Transmitter power-up
akashvibhute 0:bb74812ac6bb 520 write_register(CONFIG, ( read_register(CONFIG) | _BV(PWR_UP) ) & ~_BV(PRIM_RX) );
akashvibhute 0:bb74812ac6bb 521 // wait_msMicroseconds(150);
akashvibhute 0:bb74812ac6bb 522 wait_us(130);
akashvibhute 0:bb74812ac6bb 523
akashvibhute 0:bb74812ac6bb 524 // Send the payload
akashvibhute 0:bb74812ac6bb 525 write_payload( buf, len );
akashvibhute 0:bb74812ac6bb 526
akashvibhute 0:bb74812ac6bb 527 // Allons!
akashvibhute 0:bb74812ac6bb 528 ce(HIGH);
akashvibhute 0:bb74812ac6bb 529 // wait_msMicroseconds(15);
akashvibhute 0:bb74812ac6bb 530 wait_us(15);
akashvibhute 0:bb74812ac6bb 531 ce(LOW);
akashvibhute 0:bb74812ac6bb 532 }
akashvibhute 0:bb74812ac6bb 533
akashvibhute 0:bb74812ac6bb 534 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 535
akashvibhute 0:bb74812ac6bb 536 uint8_t RF24::getDynamicPayloadSize(void)
akashvibhute 0:bb74812ac6bb 537 {
akashvibhute 0:bb74812ac6bb 538 uint8_t result = 0;
akashvibhute 0:bb74812ac6bb 539
akashvibhute 0:bb74812ac6bb 540 csn(LOW);
akashvibhute 0:bb74812ac6bb 541 spi.write( R_RX_PL_WID );
akashvibhute 0:bb74812ac6bb 542 result = spi.write(0xff);
akashvibhute 0:bb74812ac6bb 543 csn(HIGH);
akashvibhute 0:bb74812ac6bb 544
akashvibhute 0:bb74812ac6bb 545 return result;
akashvibhute 0:bb74812ac6bb 546 }
akashvibhute 0:bb74812ac6bb 547
akashvibhute 0:bb74812ac6bb 548 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 549
akashvibhute 0:bb74812ac6bb 550 bool RF24::available(void)
akashvibhute 0:bb74812ac6bb 551 {
akashvibhute 0:bb74812ac6bb 552 return available(NULL);
akashvibhute 0:bb74812ac6bb 553 }
akashvibhute 0:bb74812ac6bb 554
akashvibhute 0:bb74812ac6bb 555 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 556
akashvibhute 0:bb74812ac6bb 557 bool RF24::available(uint8_t* pipe_num)
akashvibhute 0:bb74812ac6bb 558 {
akashvibhute 0:bb74812ac6bb 559 uint8_t status = get_status();
akashvibhute 0:bb74812ac6bb 560
akashvibhute 0:bb74812ac6bb 561 // Too noisy, enable if you really want lots o data!!
akashvibhute 0:bb74812ac6bb 562 //IF_SERIAL_DEBUG(print_status(status));
akashvibhute 0:bb74812ac6bb 563
akashvibhute 0:bb74812ac6bb 564 bool result = ( status & _BV(RX_DR) );
akashvibhute 0:bb74812ac6bb 565
akashvibhute 0:bb74812ac6bb 566 if (result)
akashvibhute 0:bb74812ac6bb 567 {
akashvibhute 0:bb74812ac6bb 568 // If the caller wants the pipe number, include that
akashvibhute 0:bb74812ac6bb 569 if ( pipe_num )
akashvibhute 0:bb74812ac6bb 570 *pipe_num = ( status >> RX_P_NO ) & 7;
akashvibhute 0:bb74812ac6bb 571
akashvibhute 0:bb74812ac6bb 572 // Clear the status bit
akashvibhute 0:bb74812ac6bb 573
akashvibhute 0:bb74812ac6bb 574 // ??? Should this REALLY be cleared now? Or wait until we
akashvibhute 0:bb74812ac6bb 575 // actually READ the payload?
akashvibhute 0:bb74812ac6bb 576
akashvibhute 0:bb74812ac6bb 577 write_register(STATUS,_BV(RX_DR) );
akashvibhute 0:bb74812ac6bb 578
akashvibhute 0:bb74812ac6bb 579 // Handle ack payload receipt
akashvibhute 0:bb74812ac6bb 580 if ( status & _BV(TX_DS) )
akashvibhute 0:bb74812ac6bb 581 {
akashvibhute 0:bb74812ac6bb 582 write_register(STATUS,_BV(TX_DS));
akashvibhute 0:bb74812ac6bb 583 }
akashvibhute 0:bb74812ac6bb 584 }
akashvibhute 0:bb74812ac6bb 585
akashvibhute 0:bb74812ac6bb 586 return result;
akashvibhute 0:bb74812ac6bb 587 }
akashvibhute 0:bb74812ac6bb 588
akashvibhute 0:bb74812ac6bb 589 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 590
akashvibhute 0:bb74812ac6bb 591 bool RF24::read( void* buf, uint8_t len )
akashvibhute 0:bb74812ac6bb 592 {
akashvibhute 0:bb74812ac6bb 593 // Fetch the payload
akashvibhute 0:bb74812ac6bb 594 read_payload( buf, len );
akashvibhute 0:bb74812ac6bb 595
akashvibhute 0:bb74812ac6bb 596 // was this the last of the data available?
akashvibhute 0:bb74812ac6bb 597 return read_register(FIFO_STATUS) & _BV(RX_EMPTY);
akashvibhute 0:bb74812ac6bb 598 }
akashvibhute 0:bb74812ac6bb 599
akashvibhute 0:bb74812ac6bb 600 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 601
akashvibhute 0:bb74812ac6bb 602 void RF24::whatHappened(bool& tx_ok,bool& tx_fail,bool& rx_ready)
akashvibhute 0:bb74812ac6bb 603 {
akashvibhute 0:bb74812ac6bb 604 // Read the status & reset the status in one easy call
akashvibhute 0:bb74812ac6bb 605 // Or is that such a good idea?
akashvibhute 0:bb74812ac6bb 606 uint8_t status = write_register(STATUS,_BV(RX_DR) | _BV(TX_DS) | _BV(MAX_RT) );
akashvibhute 0:bb74812ac6bb 607
akashvibhute 0:bb74812ac6bb 608 // Report to the user what happened
akashvibhute 0:bb74812ac6bb 609 tx_ok = status & _BV(TX_DS);
akashvibhute 0:bb74812ac6bb 610 tx_fail = status & _BV(MAX_RT);
akashvibhute 0:bb74812ac6bb 611 rx_ready = status & _BV(RX_DR);
akashvibhute 0:bb74812ac6bb 612 }
akashvibhute 0:bb74812ac6bb 613
akashvibhute 0:bb74812ac6bb 614 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 615
akashvibhute 0:bb74812ac6bb 616 void RF24::openWritingPipe(uint64_t value)
akashvibhute 0:bb74812ac6bb 617 {
akashvibhute 0:bb74812ac6bb 618 // Note that AVR 8-bit uC's store this LSB first, and the NRF24L01(+)
akashvibhute 0:bb74812ac6bb 619 // expects it LSB first too, so we're good.
akashvibhute 0:bb74812ac6bb 620
akashvibhute 0:bb74812ac6bb 621 write_register(RX_ADDR_P0, reinterpret_cast<uint8_t*>(&value), 5);
akashvibhute 0:bb74812ac6bb 622 write_register(TX_ADDR, reinterpret_cast<uint8_t*>(&value), 5);
akashvibhute 0:bb74812ac6bb 623
akashvibhute 0:bb74812ac6bb 624 const uint8_t max_payload_size = 32;
akashvibhute 0:bb74812ac6bb 625 write_register(RX_PW_P0,min(payload_size,max_payload_size));
akashvibhute 0:bb74812ac6bb 626
akashvibhute 0:bb74812ac6bb 627 flush_tx();
akashvibhute 0:bb74812ac6bb 628 }
akashvibhute 0:bb74812ac6bb 629
akashvibhute 0:bb74812ac6bb 630 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 631
akashvibhute 0:bb74812ac6bb 632 static const uint8_t child_pipe[] =
akashvibhute 0:bb74812ac6bb 633 {
akashvibhute 0:bb74812ac6bb 634 RX_ADDR_P0, RX_ADDR_P1, RX_ADDR_P2, RX_ADDR_P3, RX_ADDR_P4, RX_ADDR_P5
akashvibhute 0:bb74812ac6bb 635 };
akashvibhute 0:bb74812ac6bb 636 static const uint8_t child_payload_size[] =
akashvibhute 0:bb74812ac6bb 637 {
akashvibhute 0:bb74812ac6bb 638 RX_PW_P0, RX_PW_P1, RX_PW_P2, RX_PW_P3, RX_PW_P4, RX_PW_P5
akashvibhute 0:bb74812ac6bb 639 };
akashvibhute 0:bb74812ac6bb 640 static const uint8_t child_pipe_enable[] =
akashvibhute 0:bb74812ac6bb 641 {
akashvibhute 0:bb74812ac6bb 642 ERX_P0, ERX_P1, ERX_P2, ERX_P3, ERX_P4, ERX_P5
akashvibhute 0:bb74812ac6bb 643 };
akashvibhute 0:bb74812ac6bb 644
akashvibhute 0:bb74812ac6bb 645 void RF24::openReadingPipe(uint8_t child, uint64_t address)
akashvibhute 0:bb74812ac6bb 646 {
akashvibhute 0:bb74812ac6bb 647 // If this is pipe 0, cache the address. This is needed because
akashvibhute 0:bb74812ac6bb 648 // openWritingPipe() will overwrite the pipe 0 address, so
akashvibhute 0:bb74812ac6bb 649 // startListening() will have to restore it.
akashvibhute 0:bb74812ac6bb 650 if (child == 0)
akashvibhute 0:bb74812ac6bb 651 pipe0_reading_address = address;
akashvibhute 0:bb74812ac6bb 652
akashvibhute 0:bb74812ac6bb 653 if (child <= 6)
akashvibhute 0:bb74812ac6bb 654 {
akashvibhute 0:bb74812ac6bb 655 // For pipes 2-5, only write the LSB
akashvibhute 0:bb74812ac6bb 656 if ( child < 2 )
akashvibhute 0:bb74812ac6bb 657 write_register(child_pipe[child], reinterpret_cast<const uint8_t*>(&address), 5);
akashvibhute 0:bb74812ac6bb 658 else
akashvibhute 0:bb74812ac6bb 659 write_register(child_pipe[child], reinterpret_cast<const uint8_t*>(&address), 1);
akashvibhute 0:bb74812ac6bb 660
akashvibhute 0:bb74812ac6bb 661 write_register(child_payload_size[child],payload_size);
akashvibhute 0:bb74812ac6bb 662
akashvibhute 0:bb74812ac6bb 663 // Note it would be more efficient to set all of the bits for all open
akashvibhute 0:bb74812ac6bb 664 // pipes at once. However, I thought it would make the calling code
akashvibhute 0:bb74812ac6bb 665 // more simple to do it this way.
akashvibhute 0:bb74812ac6bb 666 write_register(EN_RXADDR,read_register(EN_RXADDR) | _BV(child_pipe_enable[child]));
akashvibhute 0:bb74812ac6bb 667 }
akashvibhute 0:bb74812ac6bb 668 }
akashvibhute 0:bb74812ac6bb 669
akashvibhute 0:bb74812ac6bb 670 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 671
akashvibhute 0:bb74812ac6bb 672 void RF24::toggle_features(void)
akashvibhute 0:bb74812ac6bb 673 {
akashvibhute 0:bb74812ac6bb 674 csn(LOW);
akashvibhute 0:bb74812ac6bb 675 spi.write( ACTIVATE );
akashvibhute 0:bb74812ac6bb 676 spi.write( 0x73 );
akashvibhute 0:bb74812ac6bb 677 csn(HIGH);
akashvibhute 0:bb74812ac6bb 678 }
akashvibhute 0:bb74812ac6bb 679
akashvibhute 0:bb74812ac6bb 680 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 681
akashvibhute 0:bb74812ac6bb 682 void RF24::enableDynamicPayloads(void)
akashvibhute 0:bb74812ac6bb 683 {
akashvibhute 0:bb74812ac6bb 684 // Enable dynamic payload throughout the system
akashvibhute 0:bb74812ac6bb 685 write_register(FEATURE,read_register(FEATURE) | _BV(EN_DPL) );
akashvibhute 0:bb74812ac6bb 686
akashvibhute 0:bb74812ac6bb 687 // If it didn't work, the features are not enabled
akashvibhute 0:bb74812ac6bb 688 if ( ! read_register(FEATURE) )
akashvibhute 0:bb74812ac6bb 689 {
akashvibhute 0:bb74812ac6bb 690 // So enable them and try again
akashvibhute 0:bb74812ac6bb 691 toggle_features();
akashvibhute 0:bb74812ac6bb 692 write_register(FEATURE,read_register(FEATURE) | _BV(EN_DPL) );
akashvibhute 0:bb74812ac6bb 693 }
akashvibhute 0:bb74812ac6bb 694
akashvibhute 0:bb74812ac6bb 695 // IF_SERIAL_DEBUG(printf("FEATURE=%i\r\n",read_register(FEATURE)));
akashvibhute 0:bb74812ac6bb 696
akashvibhute 0:bb74812ac6bb 697 // Enable dynamic payload on all pipes
akashvibhute 0:bb74812ac6bb 698 //
akashvibhute 0:bb74812ac6bb 699 // Not sure the use case of only having dynamic payload on certain
akashvibhute 0:bb74812ac6bb 700 // pipes, so the library does not support it.
akashvibhute 0:bb74812ac6bb 701 write_register(DYNPD,read_register(DYNPD) | _BV(DPL_P5) | _BV(DPL_P4) | _BV(DPL_P3) | _BV(DPL_P2) | _BV(DPL_P1) | _BV(DPL_P0));
akashvibhute 0:bb74812ac6bb 702
akashvibhute 0:bb74812ac6bb 703 dynamic_payloads_enabled = true;
akashvibhute 0:bb74812ac6bb 704 }
akashvibhute 0:bb74812ac6bb 705
akashvibhute 0:bb74812ac6bb 706 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 707
akashvibhute 0:bb74812ac6bb 708 void RF24::enableAckPayload(void)
akashvibhute 0:bb74812ac6bb 709 {
akashvibhute 0:bb74812ac6bb 710 //
akashvibhute 0:bb74812ac6bb 711 // enable ack payload and dynamic payload features
akashvibhute 0:bb74812ac6bb 712 //
akashvibhute 0:bb74812ac6bb 713
akashvibhute 0:bb74812ac6bb 714 write_register(FEATURE,read_register(FEATURE) | _BV(EN_ACK_PAY) | _BV(EN_DPL) );
akashvibhute 0:bb74812ac6bb 715
akashvibhute 0:bb74812ac6bb 716 // If it didn't work, the features are not enabled
akashvibhute 0:bb74812ac6bb 717 if ( ! read_register(FEATURE) )
akashvibhute 0:bb74812ac6bb 718 {
akashvibhute 0:bb74812ac6bb 719 // So enable them and try again
akashvibhute 0:bb74812ac6bb 720 toggle_features();
akashvibhute 0:bb74812ac6bb 721 write_register(FEATURE,read_register(FEATURE) | _BV(EN_ACK_PAY) | _BV(EN_DPL) );
akashvibhute 0:bb74812ac6bb 722 }
akashvibhute 0:bb74812ac6bb 723
akashvibhute 0:bb74812ac6bb 724 // IF_SERIAL_DEBUG(printf("FEATURE=%i\r\n",read_register(FEATURE)));
akashvibhute 0:bb74812ac6bb 725
akashvibhute 0:bb74812ac6bb 726 //
akashvibhute 0:bb74812ac6bb 727 // Enable dynamic payload on pipes 0 & 1
akashvibhute 0:bb74812ac6bb 728 //
akashvibhute 0:bb74812ac6bb 729
akashvibhute 0:bb74812ac6bb 730 write_register(DYNPD,read_register(DYNPD) | _BV(DPL_P1) | _BV(DPL_P0));
akashvibhute 0:bb74812ac6bb 731 }
akashvibhute 0:bb74812ac6bb 732
akashvibhute 0:bb74812ac6bb 733 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 734
akashvibhute 0:bb74812ac6bb 735 void RF24::writeAckPayload(uint8_t pipe, const void* buf, uint8_t len)
akashvibhute 0:bb74812ac6bb 736 {
akashvibhute 0:bb74812ac6bb 737 const uint8_t* current = reinterpret_cast<const uint8_t*>(buf);
akashvibhute 0:bb74812ac6bb 738
akashvibhute 0:bb74812ac6bb 739 csn(LOW);
akashvibhute 0:bb74812ac6bb 740 spi.write( W_ACK_PAYLOAD | ( pipe & 7 ) );
akashvibhute 0:bb74812ac6bb 741 const uint8_t max_payload_size = 32;
akashvibhute 0:bb74812ac6bb 742 uint8_t data_len = min(len,max_payload_size);
akashvibhute 0:bb74812ac6bb 743 while ( data_len-- )
akashvibhute 0:bb74812ac6bb 744 spi.write(*current++);
akashvibhute 0:bb74812ac6bb 745
akashvibhute 0:bb74812ac6bb 746 csn(HIGH);
akashvibhute 0:bb74812ac6bb 747 }
akashvibhute 0:bb74812ac6bb 748
akashvibhute 0:bb74812ac6bb 749 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 750
akashvibhute 0:bb74812ac6bb 751 bool RF24::isAckPayloadAvailable(void)
akashvibhute 0:bb74812ac6bb 752 {
akashvibhute 0:bb74812ac6bb 753 bool result = ack_payload_available;
akashvibhute 0:bb74812ac6bb 754 ack_payload_available = false;
akashvibhute 0:bb74812ac6bb 755 return result;
akashvibhute 0:bb74812ac6bb 756 }
akashvibhute 0:bb74812ac6bb 757
akashvibhute 0:bb74812ac6bb 758 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 759
akashvibhute 0:bb74812ac6bb 760 bool RF24::isPVariant(void)
akashvibhute 0:bb74812ac6bb 761 {
akashvibhute 0:bb74812ac6bb 762 return p_variant ;
akashvibhute 0:bb74812ac6bb 763 }
akashvibhute 0:bb74812ac6bb 764
akashvibhute 0:bb74812ac6bb 765 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 766
akashvibhute 0:bb74812ac6bb 767 void RF24::setAutoAck(bool enable)
akashvibhute 0:bb74812ac6bb 768 {
akashvibhute 0:bb74812ac6bb 769 if ( enable )
akashvibhute 0:bb74812ac6bb 770 write_register(EN_AA, 63);
akashvibhute 0:bb74812ac6bb 771 else
akashvibhute 0:bb74812ac6bb 772 write_register(EN_AA, 0);
akashvibhute 0:bb74812ac6bb 773 }
akashvibhute 0:bb74812ac6bb 774
akashvibhute 0:bb74812ac6bb 775 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 776
akashvibhute 0:bb74812ac6bb 777 void RF24::setAutoAck( uint8_t pipe, bool enable )
akashvibhute 0:bb74812ac6bb 778 {
akashvibhute 0:bb74812ac6bb 779 if ( pipe <= 6 )
akashvibhute 0:bb74812ac6bb 780 {
akashvibhute 0:bb74812ac6bb 781 uint8_t en_aa = read_register( EN_AA ) ;
akashvibhute 0:bb74812ac6bb 782 if( enable )
akashvibhute 0:bb74812ac6bb 783 {
akashvibhute 0:bb74812ac6bb 784 en_aa |= _BV(pipe) ;
akashvibhute 0:bb74812ac6bb 785 }
akashvibhute 0:bb74812ac6bb 786 else
akashvibhute 0:bb74812ac6bb 787 {
akashvibhute 0:bb74812ac6bb 788 en_aa &= ~_BV(pipe) ;
akashvibhute 0:bb74812ac6bb 789 }
akashvibhute 0:bb74812ac6bb 790 write_register( EN_AA, en_aa ) ;
akashvibhute 0:bb74812ac6bb 791 }
akashvibhute 0:bb74812ac6bb 792 }
akashvibhute 0:bb74812ac6bb 793
akashvibhute 0:bb74812ac6bb 794 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 795
akashvibhute 0:bb74812ac6bb 796 bool RF24::testCarrier(void)
akashvibhute 0:bb74812ac6bb 797 {
akashvibhute 0:bb74812ac6bb 798 return ( read_register(CD) & 1 );
akashvibhute 0:bb74812ac6bb 799 }
akashvibhute 0:bb74812ac6bb 800
akashvibhute 0:bb74812ac6bb 801 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 802
akashvibhute 0:bb74812ac6bb 803 bool RF24::testRPD(void)
akashvibhute 0:bb74812ac6bb 804 {
akashvibhute 0:bb74812ac6bb 805 return ( read_register(RPD) & 1 ) ;
akashvibhute 0:bb74812ac6bb 806 }
akashvibhute 0:bb74812ac6bb 807
akashvibhute 0:bb74812ac6bb 808 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 809
akashvibhute 0:bb74812ac6bb 810 void RF24::setPALevel(rf24_pa_dbm_e level)
akashvibhute 0:bb74812ac6bb 811 {
akashvibhute 0:bb74812ac6bb 812 uint8_t setup = read_register(RF_SETUP) ;
akashvibhute 0:bb74812ac6bb 813 setup &= ~(_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ;
akashvibhute 0:bb74812ac6bb 814
akashvibhute 0:bb74812ac6bb 815 // switch uses RAM (evil!)
akashvibhute 0:bb74812ac6bb 816 if ( level == RF24_PA_MAX )
akashvibhute 0:bb74812ac6bb 817 {
akashvibhute 0:bb74812ac6bb 818 setup |= (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ;
akashvibhute 0:bb74812ac6bb 819 }
akashvibhute 0:bb74812ac6bb 820 else if ( level == RF24_PA_HIGH )
akashvibhute 0:bb74812ac6bb 821 {
akashvibhute 0:bb74812ac6bb 822 setup |= _BV(RF_PWR_HIGH) ;
akashvibhute 0:bb74812ac6bb 823 }
akashvibhute 0:bb74812ac6bb 824 else if ( level == RF24_PA_LOW )
akashvibhute 0:bb74812ac6bb 825 {
akashvibhute 0:bb74812ac6bb 826 setup |= _BV(RF_PWR_LOW);
akashvibhute 0:bb74812ac6bb 827 }
akashvibhute 0:bb74812ac6bb 828 else if ( level == RF24_PA_MIN )
akashvibhute 0:bb74812ac6bb 829 {
akashvibhute 0:bb74812ac6bb 830 // nothing
akashvibhute 0:bb74812ac6bb 831 }
akashvibhute 0:bb74812ac6bb 832 else if ( level == RF24_PA_ERROR )
akashvibhute 0:bb74812ac6bb 833 {
akashvibhute 0:bb74812ac6bb 834 // On error, go to maximum PA
akashvibhute 0:bb74812ac6bb 835 setup |= (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ;
akashvibhute 0:bb74812ac6bb 836 }
akashvibhute 0:bb74812ac6bb 837
akashvibhute 0:bb74812ac6bb 838 write_register( RF_SETUP, setup ) ;
akashvibhute 0:bb74812ac6bb 839 }
akashvibhute 0:bb74812ac6bb 840
akashvibhute 0:bb74812ac6bb 841 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 842
akashvibhute 0:bb74812ac6bb 843 rf24_pa_dbm_e RF24::getPALevel(void)
akashvibhute 0:bb74812ac6bb 844 {
akashvibhute 0:bb74812ac6bb 845 rf24_pa_dbm_e result = RF24_PA_ERROR ;
akashvibhute 0:bb74812ac6bb 846 uint8_t power = read_register(RF_SETUP) & (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) ;
akashvibhute 0:bb74812ac6bb 847
akashvibhute 0:bb74812ac6bb 848 // switch uses RAM (evil!)
akashvibhute 0:bb74812ac6bb 849 if ( power == (_BV(RF_PWR_LOW) | _BV(RF_PWR_HIGH)) )
akashvibhute 0:bb74812ac6bb 850 {
akashvibhute 0:bb74812ac6bb 851 result = RF24_PA_MAX ;
akashvibhute 0:bb74812ac6bb 852 }
akashvibhute 0:bb74812ac6bb 853 else if ( power == _BV(RF_PWR_HIGH) )
akashvibhute 0:bb74812ac6bb 854 {
akashvibhute 0:bb74812ac6bb 855 result = RF24_PA_HIGH ;
akashvibhute 0:bb74812ac6bb 856 }
akashvibhute 0:bb74812ac6bb 857 else if ( power == _BV(RF_PWR_LOW) )
akashvibhute 0:bb74812ac6bb 858 {
akashvibhute 0:bb74812ac6bb 859 result = RF24_PA_LOW ;
akashvibhute 0:bb74812ac6bb 860 }
akashvibhute 0:bb74812ac6bb 861 else
akashvibhute 0:bb74812ac6bb 862 {
akashvibhute 0:bb74812ac6bb 863 result = RF24_PA_MIN ;
akashvibhute 0:bb74812ac6bb 864 }
akashvibhute 0:bb74812ac6bb 865
akashvibhute 0:bb74812ac6bb 866 return result ;
akashvibhute 0:bb74812ac6bb 867 }
akashvibhute 0:bb74812ac6bb 868
akashvibhute 0:bb74812ac6bb 869 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 870
akashvibhute 0:bb74812ac6bb 871 bool RF24::setDataRate(rf24_datarate_e speed)
akashvibhute 0:bb74812ac6bb 872 {
akashvibhute 0:bb74812ac6bb 873 bool result = false;
akashvibhute 0:bb74812ac6bb 874 uint8_t setup = read_register(RF_SETUP) ;
akashvibhute 0:bb74812ac6bb 875
akashvibhute 0:bb74812ac6bb 876 // HIGH and LOW '00' is 1Mbs - our default
akashvibhute 0:bb74812ac6bb 877 wide_band = false ;
akashvibhute 0:bb74812ac6bb 878 setup &= ~(_BV(RF_DR_LOW) | _BV(RF_DR_HIGH)) ;
akashvibhute 0:bb74812ac6bb 879 if( speed == RF24_250KBPS )
akashvibhute 0:bb74812ac6bb 880 {
akashvibhute 0:bb74812ac6bb 881 // Must set the RF_DR_LOW to 1; RF_DR_HIGH (used to be RF_DR) is already 0
akashvibhute 0:bb74812ac6bb 882 // Making it '10'.
akashvibhute 0:bb74812ac6bb 883 wide_band = false ;
akashvibhute 0:bb74812ac6bb 884 setup |= _BV( RF_DR_LOW ) ;
akashvibhute 0:bb74812ac6bb 885 }
akashvibhute 0:bb74812ac6bb 886 else
akashvibhute 0:bb74812ac6bb 887 {
akashvibhute 0:bb74812ac6bb 888 // Set 2Mbs, RF_DR (RF_DR_HIGH) is set 1
akashvibhute 0:bb74812ac6bb 889 // Making it '01'
akashvibhute 0:bb74812ac6bb 890 if ( speed == RF24_2MBPS )
akashvibhute 0:bb74812ac6bb 891 {
akashvibhute 0:bb74812ac6bb 892 wide_band = true ;
akashvibhute 0:bb74812ac6bb 893 setup |= _BV(RF_DR_HIGH);
akashvibhute 0:bb74812ac6bb 894 }
akashvibhute 0:bb74812ac6bb 895 else
akashvibhute 0:bb74812ac6bb 896 {
akashvibhute 0:bb74812ac6bb 897 // 1Mbs
akashvibhute 0:bb74812ac6bb 898 wide_band = false ;
akashvibhute 0:bb74812ac6bb 899 }
akashvibhute 0:bb74812ac6bb 900 }
akashvibhute 0:bb74812ac6bb 901 write_register(RF_SETUP,setup);
akashvibhute 0:bb74812ac6bb 902
akashvibhute 0:bb74812ac6bb 903 // Verify our result
akashvibhute 0:bb74812ac6bb 904 if ( read_register(RF_SETUP) == setup )
akashvibhute 0:bb74812ac6bb 905 {
akashvibhute 0:bb74812ac6bb 906 result = true;
akashvibhute 0:bb74812ac6bb 907 }
akashvibhute 0:bb74812ac6bb 908 else
akashvibhute 0:bb74812ac6bb 909 {
akashvibhute 0:bb74812ac6bb 910 wide_band = false;
akashvibhute 0:bb74812ac6bb 911 }
akashvibhute 0:bb74812ac6bb 912
akashvibhute 0:bb74812ac6bb 913 return result;
akashvibhute 0:bb74812ac6bb 914 }
akashvibhute 0:bb74812ac6bb 915
akashvibhute 0:bb74812ac6bb 916 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 917
akashvibhute 0:bb74812ac6bb 918 rf24_datarate_e RF24::getDataRate( void )
akashvibhute 0:bb74812ac6bb 919 {
akashvibhute 0:bb74812ac6bb 920 rf24_datarate_e result ;
akashvibhute 0:bb74812ac6bb 921 uint8_t dr = read_register(RF_SETUP) & (_BV(RF_DR_LOW) | _BV(RF_DR_HIGH));
akashvibhute 0:bb74812ac6bb 922
akashvibhute 0:bb74812ac6bb 923 // switch uses RAM (evil!)
akashvibhute 0:bb74812ac6bb 924 // Order matters in our case below
akashvibhute 0:bb74812ac6bb 925 if ( dr == _BV(RF_DR_LOW) )
akashvibhute 0:bb74812ac6bb 926 {
akashvibhute 0:bb74812ac6bb 927 // '10' = 250KBPS
akashvibhute 0:bb74812ac6bb 928 result = RF24_250KBPS ;
akashvibhute 0:bb74812ac6bb 929 }
akashvibhute 0:bb74812ac6bb 930 else if ( dr == _BV(RF_DR_HIGH) )
akashvibhute 0:bb74812ac6bb 931 {
akashvibhute 0:bb74812ac6bb 932 // '01' = 2MBPS
akashvibhute 0:bb74812ac6bb 933 result = RF24_2MBPS ;
akashvibhute 0:bb74812ac6bb 934 }
akashvibhute 0:bb74812ac6bb 935 else
akashvibhute 0:bb74812ac6bb 936 {
akashvibhute 0:bb74812ac6bb 937 // '00' = 1MBPS
akashvibhute 0:bb74812ac6bb 938 result = RF24_1MBPS ;
akashvibhute 0:bb74812ac6bb 939 }
akashvibhute 0:bb74812ac6bb 940 return result ;
akashvibhute 0:bb74812ac6bb 941 }
akashvibhute 0:bb74812ac6bb 942
akashvibhute 0:bb74812ac6bb 943 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 944
akashvibhute 0:bb74812ac6bb 945 void RF24::setCRCLength(rf24_crclength_e length)
akashvibhute 0:bb74812ac6bb 946 {
akashvibhute 0:bb74812ac6bb 947 uint8_t config = read_register(CONFIG) & ~( _BV(CRCO) | _BV(EN_CRC)) ;
akashvibhute 0:bb74812ac6bb 948
akashvibhute 0:bb74812ac6bb 949 if ( length == RF24_CRC_DISABLED )
akashvibhute 0:bb74812ac6bb 950 {
akashvibhute 0:bb74812ac6bb 951 // Do nothing, we turned it off above.
akashvibhute 0:bb74812ac6bb 952 }
akashvibhute 0:bb74812ac6bb 953 else if ( length == RF24_CRC_8 )
akashvibhute 0:bb74812ac6bb 954 {
akashvibhute 0:bb74812ac6bb 955 config |= _BV(EN_CRC);
akashvibhute 0:bb74812ac6bb 956 }
akashvibhute 0:bb74812ac6bb 957 else
akashvibhute 0:bb74812ac6bb 958 {
akashvibhute 0:bb74812ac6bb 959 config |= _BV(EN_CRC);
akashvibhute 0:bb74812ac6bb 960 config |= _BV( CRCO );
akashvibhute 0:bb74812ac6bb 961 }
akashvibhute 0:bb74812ac6bb 962 write_register( CONFIG, config ) ;
akashvibhute 0:bb74812ac6bb 963 }
akashvibhute 0:bb74812ac6bb 964
akashvibhute 0:bb74812ac6bb 965 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 966
akashvibhute 0:bb74812ac6bb 967 rf24_crclength_e RF24::getCRCLength(void)
akashvibhute 0:bb74812ac6bb 968 {
akashvibhute 0:bb74812ac6bb 969 rf24_crclength_e result = RF24_CRC_DISABLED;
akashvibhute 0:bb74812ac6bb 970 uint8_t config = read_register(CONFIG) & ( _BV(CRCO) | _BV(EN_CRC)) ;
akashvibhute 0:bb74812ac6bb 971
akashvibhute 0:bb74812ac6bb 972 if ( config & _BV(EN_CRC ) )
akashvibhute 0:bb74812ac6bb 973 {
akashvibhute 0:bb74812ac6bb 974 if ( config & _BV(CRCO) )
akashvibhute 0:bb74812ac6bb 975 result = RF24_CRC_16;
akashvibhute 0:bb74812ac6bb 976 else
akashvibhute 0:bb74812ac6bb 977 result = RF24_CRC_8;
akashvibhute 0:bb74812ac6bb 978 }
akashvibhute 0:bb74812ac6bb 979
akashvibhute 0:bb74812ac6bb 980 return result;
akashvibhute 0:bb74812ac6bb 981 }
akashvibhute 0:bb74812ac6bb 982
akashvibhute 0:bb74812ac6bb 983 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 984
akashvibhute 0:bb74812ac6bb 985 void RF24::disableCRC( void )
akashvibhute 0:bb74812ac6bb 986 {
akashvibhute 0:bb74812ac6bb 987 uint8_t disable = read_register(CONFIG) & ~_BV(EN_CRC) ;
akashvibhute 0:bb74812ac6bb 988 write_register( CONFIG, disable ) ;
akashvibhute 0:bb74812ac6bb 989 }
akashvibhute 0:bb74812ac6bb 990
akashvibhute 0:bb74812ac6bb 991 /****************************************************************************/
akashvibhute 0:bb74812ac6bb 992 void RF24::setRetries(uint8_t delay, uint8_t count)
akashvibhute 0:bb74812ac6bb 993 {
akashvibhute 0:bb74812ac6bb 994 write_register(SETUP_RETR,(delay&0xf)<<ARD | (count&0xf)<<ARC);
akashvibhute 0:bb74812ac6bb 995 }
akashvibhute 0:bb74812ac6bb 996
akashvibhute 0:bb74812ac6bb 997 uint8_t RF24::min(uint8_t a, uint8_t b)
akashvibhute 0:bb74812ac6bb 998 {
akashvibhute 0:bb74812ac6bb 999 if(a < b)
akashvibhute 0:bb74812ac6bb 1000 return a;
akashvibhute 0:bb74812ac6bb 1001 else
akashvibhute 0:bb74812ac6bb 1002 return b;
akashvibhute 0:bb74812ac6bb 1003 }