Dependents of TFT_fonts

A dependent is a program or library which makes use of this library.

test for the SPI_TFT Lib LCD, TFT
Modified to work with two displays
Mandelbrot viewer for SPI TFT touchscreen Fractal, Mandelbrot, TFT, Touchscreen
Bar-graph visualisation demo of reading data from Neurosky's Mindwave Mobile headset, reading via BlueSMIRF Silver bluetooth modem and displaying via MikroElektronika's TFT Proto 320x240 touchscreen. brain, EEG, Mindwave, Neurosky, QVGA, TFT
test vor the new lcd with a ILI9341 controller
Bob Stone / BlinkTalk Featured
A portable, hands-free, zero-effort blink-controlled speech system, inspired by the voice system of Stephen Hawking. Uses mbed, Neurosky Mindwave Mobile headset, BlueSMiRF modem and Emic2 speech board. Emic2, Mindwave, Neurosky, speech
A simple demonstration program for the Seeed Studio TFT Touch Shield V2.0 display, ILI9341, Seeed, Seeed Studio, Studio, TFT, touch
Test program for the E-Paper display
Test program for E.Paper display for LPC1768 display, E-Paper
SeedStudioTFTv2 controlled from mbed1768/11U24 on mbeDshield 0.4.0
An example that shows how to use the Embedded Artists E-paper display. This example is using the EaEpaper library originally developed by Peter Drescher
aivan upea mahtava piirto-ohjelma
Test program for 2.2 QVGA TFT with SD-connector. Inexpensive from
follow the instruction in, make two update, 1. replace P5, P6, P7, P8, P9, P10 with SPI_TFT_ILI9341 TFT(PTD2, PTD3, PTD1, PTD0, PTA20, PTA13,"TFT"); // mosi, miso, sclk, cs, reset, …
MIDI Interface in progress
test program for Sharp memory LCD
Setup for Adafruit 2.8" TFT with touch screen and SD card SDCard, TFT
a demo code to use Seeed TFT Touch Shield V2.0 on ARCH or ARCH Pro
update Library and Demo Animation.
Cell phone
SHARPメモリ液晶+つぼフォント(GT20L16J1Y) の表示サンプル。 半角カナ(JIS X 0201)と、2バイトUTF-8コード(顔文字に使用)に対応。
2.8" TFT LCD with Cap Touch Breakout Board w/MicroSD Socket interfaced with kl25z
sd card and tft
Motoo Tanaka / TS_Eyes Featured
TS Eyes A simple program to test TSI function of FRDM-KL25Z board using the Adafruit 2.8" TFT with Touch Sensor. It behaves like the X11eyes, but this time it follows … FRDM-KL25Z, TFT, TSI
While I was thinking about logging sensor values, I noticed that I have not got clock for this board. Blowsing the mbed API, I found that the ticker could be … clock, FRDM-KL25Z, SPI_STMPE610, TFT
Example program for TFT 2.8" Shield by SeeedStudio that features an ILI9341 display controller in SPI-mode, a 4-wire resistive touch screen overlay, and a microSD slot. display, shield, TFT, touch
STS2 Adafruit TFT ok
EaPaper Library for EM027BS013 EaPaper, EM027BS013
Demo program for Adafruit TFT 2.8" TFT resistive touch Shield - TFT screen library from SeeedStudio - touch screen library from Motoo Tanaka - pinout for Nucleo-F103RB
E-Paper GDE021A1 demo app e-ink, E-Paper
Racing robots sven
Varijanta TFT banggood za PAI
Adafruit TFT 2.8" test program for FRDM-K64F Note: J11 must be cut to make TSC work, but to download the program it must be reconnected, use pin-header and jumper. FRDM-K64F, STMPE610
Test program for 2.2 QVGA TFT with SD-connector. Inexpensive from modified CJS 2014 Kl-25Z