David Wahl

David’s activity

Program updated: Nucleo_BQ76PL536A - b'Rough start'
David Wahl - 25 Jul 2021
Library updated: BQ76PL536A - b'Initial rough start to the BQ76PL536A (or BQ76PL536A-Q1) code'
David Wahl - 25 Jul 2021
Library updated: MCP9600 - Rewrote I2C related items from ykita's original code. Not sure if the original was tested or not, but I was getting compile errors for Nucleo boards.
David Wahl - 08 Aug 2019
Program updated: I2C_Scanner - Initial commit
David Wahl - 07 Aug 2019
Library updated: KellerDruck_pressure - 6-MAY-2019 Added check on startup to detect whether or not a sensor is plugged in (initFailed bool)
David Wahl - 06 May 2019
Question asked: How can I temporarily disable I2C and re-enable after?: I'm communicating with some devices via I2C that occasionally lock up and hold one the …
David Wahl - 22 Apr 2019
Reply to Build system error using mbed-os and Nucleo-F303K8 - Bump. Did I post this in the wrong spot?
David Wahl - 27 Aug 2018

David’s public repositories

  • BQ76PL536A

    Initial rough start to the BQ76PL536A (or BQ76PL536A-Q1) code. Free to use as long as you make any changes/improvements publicly available. Please notify me of any improvements.

    Last updated: 25 Jul 2021 4 0
  • Mbed 2 deprecated
    I2C_Scanner

    Scans for I2C devices and prints out the addresses to serial. Scans once at startup and again whenever it receives a "s" over the serial port. When using putty, turn …

    I2C, scanner
    Last updated: 07 Aug 2019 1 26
  • KellerDruck_pressure

    Library to read from Keller Druck I2C Pressure sensors. Inputs are I2C object and address.

    Last updated: 06 May 2019 10 15
  • MCP9600

    Fixed some I2C items to work on STM Nucleo F446RE

    Last updated: 08 Aug 2019 2 16
  • Nucleo_BQ76PL536A

    Initial rough copy

    Last updated: 25 Jul 2021 3 0
  • PWM-Coil-driver

    Drive a coil (valve, solenoid, contactor, etc)

    Last updated: 26 Sep 2017 8 9
  • VL6180

    Fork of original library from sburg. Identical except it takes an I2C object as the input rather than individual pin names. Useful if you have multiple I2C devices on a …

    Last updated: 20 Jul 2017 6 4
See all repositories