Diff: example.h

Revision:

0:4f4ccb203a70

Child:

1:611a8f5ac65c

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/example.h	Thu Jan 13 01:47:31 2011 +0000
@@ -0,0 +1,101 @@
+/*
+    Copyright (c) 2010 Andy Kirkham
+ 
+    Permission is hereby granted, free of charge, to any person obtaining a copy
+    of this software and associated documentation files (the "Software"), to deal
+    in the Software without restriction, including without limitation the rights
+    to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+    copies of the Software, and to permit persons to whom the Software is
+    furnished to do so, subject to the following conditions:
+ 
+    The above copyright notice and this permission notice shall be included in
+    all copies or substantial portions of the Software.
+ 
+    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+    AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+    OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+    THE SOFTWARE.
+*/
+
+#ifdef PINDETECT_EXAMPLE_COMPILE
+
+#include "mbed.h"
+#include "PinDetect.h"
+
+PinDetect  pin( p21 );
+DigitalOut led1( LED1 );
+DigitalOut led2( LED2 );
+DigitalOut led3( LED3 );
+DigitalOut led4( LED4 );
+
+void keyPressed( void ) {
+    led2 = 1;
+    led3 = 0;
+    led4 = 0;
+}
+
+void keyReleased( void ) {
+    led2 = 0;
+    led3 = 0;
+    led4 = 0;
+}
+
+void keyPressedHeld( void ) {
+    led3 = 1;
+}
+
+void keyReleasedHeld( void ) {
+    led4 = 1;
+}
+
+int main() {
+
+    pin.mode( PullDown );
+    pin.attach_asserted( &keyPressed );
+    pin.attach_deasserted( &keyReleased );
+    pin.attach_asserted_held( &keyPressedHeld );
+    
+    // This callback will often be of little use as it's
+    // called after every assertion/deassertion. However,
+    // it's provided for completeness. You may find a use
+    // for it. If not, just don't attach a callback and it
+    // will not activate.
+    pin.attach_deasserted_held( &keyReleasedHeld );
+    
+    // You can define how many continuous samples must be
+    // asserted before the attach_asserted() function is called.
+    //     pin.setSamplesTillAssert( 10 );
+    // This would mean 10 * 20ms debounce time = 200ms.
+
+    // You can define how many continuous samples must be
+    // asserted before the attach_asserted_held() function is called.
+    //     pin.setSamplesTillHeld( 200 );
+    // This would mean 200 * 20ms debounce time = 2seconds.
+
+    // By default, "asserted" assumes the pin going high from 0volts to 5volts
+    // and deasserted assumes going from 5volts to 0volts. You can invert this
+    // logic so that going to 0volts is asserted and going to 5volts is deasserted
+    // using this setup function:-
+    //     pin.setAssertValue( 0 );
+
+    // Sampling does NOT begin until you set the frequency. So, until
+    // you call this function NO callbacks will be made. With no arguments
+    // passed the default is 20000 microseconds (20ms). Specifiy the sampling
+    // period in microseconds if you want a different value to 20ms.
+    // For example, for a sampling period of 10ms do:-
+    //     pin.setSampleFrequency( 10000 );
+    // Note, if you change the sampling frequency you will probably also
+    // want to change the number of samples till assert and held as show
+    // above.
+    pin.setSampleFrequency(); // Defaults to 20ms.
+
+    while( 1 ) {
+        led1 = !led1;
+        wait( 0.2 );
+    }
+}
+
+#endif