Mbed OS Device Management example for various ST boards.

DEPRECATED

This example application is not maintained and not recommended. It uses an old version of Mbed OS, Pelion DM and Arm toolchain. It doesn't work with Mbed Studio.

Please use: https://os.mbed.com/teams/mbed-os-examples/code/mbed-os-example-pelion/

This example is known to work great on the following platforms:

  • DISCO_L475E_IOT01A - onboard WiFI and onboard QSPI flash. Board specific example using onboard sensors is available here.
  • DISCO_F413H - onboard WiFI and onboard QSPI flash.
  • DISCO_F469NI - WizFi310 WiFI shield and onboard QSPI flash (see WiFi shield instructions).
  • DISCO_F746NG - onboard Ethernet and using onboard QSPI flash.
  • DISCO_F769NI - onboard Ethernet and using onboard QSPI flash.
  • DISCO_L496AG - WizFi310 WiFI shield and onboard QSPI flash (see WiFi shield instructions).
  • NUCLEO_F207ZG - onboard Ethernet and wired SD card (SD card wiring instructions).
  • NUCLEO_F412ZG - WizFi310 WiFI shield and SD card shield (see WiFi shield instructions).
  • NUCLEO_F429ZI - onboard Ethernet and wired SD card (SD card wiring instructions).
  • NUCLEO_F746ZG - onboard Ethernet and wired SD card (SD card wiring instructions).
  • NUCLEO_F767ZI - onboard Ethernet and wired SD card (SD card wiring instructions).
  • NUCLEO_L476RG - WizFi310 WiFI shield and SD card shield (see WiFi shield instructions).
  • NUCLEO_L496ZG - WizFi310 WiFI shield and SD card shield (see WiFi shield instructions).
  • NUCLEO_L4R5ZI - WizFi310 WiFI shield and SD card shield (see WiFi shield instructions).

Follow the Quick-Start instructions: https://cloud.mbed.com/quick-start

DISCO_L475E_IOT01A DISCO_F413H DISCO_F746NG NUCLEO_F429ZI, NUCLEO_F767ZI, NUCLEO_F746ZG,NUCLEO_F207ZG

Example functionality

This example showcases the following device functionality:

  • Read ADC temperature and ADC vref, and report them as Pelion LWM2M resources (see image below).
  • On user button click, increment Pelion LWM2M button resource.
  • Allow the user to change the state of the board LED from Pelion LWM2M led_state resource and PUT request.

/media/uploads/screamer/pelion_st_adc_reading.png

SD card wiring

The ST Nucleo family of boards don't have storage onboard and therefore you will need an SD card. A limitation on ST Nucleo 144 boards is that there's a conflict between Ethernet and SPI pins on Arduino D11. Due to this, the SD card must be wired to different SPI bus that doesn't conflict with other functionality. The image below provide instructions on how to wire an SD card to a non-conflicting SPI instance.

/media/uploads/screamer/st_nucleo_144_sd.jpeg?v=4

If you are not a first-time Pelion Device Management user your device's SD card may already have connect and update certificates on it. If this is the case, remove and manually format your micro SD card, flash the binary to the device and then re-insert your micro SD card.

WiFi shield setup/wiring

Some ST Nucleo and Discovery boards don't have IP connectivity option, but bundled with a WiFi shield, they can take benefit of full device management capabilities. See links to reference images below on how to wire WizFI310 WiFi shield and/or SD card shield:

Use this example with Mbed CLI

1. Import the application into your desktop:

mbed import /teams/ST/code/pelion-example-common

cd pelion-example-common

2. Install the CLOUD_SDK_API_KEY

mbed config -G CLOUD_SDK_API_KEY <PELION_DM_API_KEY>

For instructions on how to generate your API key, please see the documentation.

3. Initialize firmware credentials (done once per repository). You can use the following command:

mbed dm init -d "<your company name in Pelion DM>" --model-name "<product model identifier>" -q --force

If above command do not work for your Mbed CLI, please consider upgrading Mbed CLI to version 1.8.x or above.

4. Compile and program:

mbed compile -t <toolchain> -m <TARGET_BOARD>

(supported toolchains : GCC_ARM / ARM / IAR)

bootloader/LICENSE

Committer:
screamer
Date:
2019-03-27
Revision:
25:d8a84856bd96
Parent:
0:ea30ba97a865

File content as of revision 25:d8a84856bd96:

Permissive Binary License

Version 1.0, September 2015

Redistribution.  Redistribution and use in binary form, without
modification, are permitted provided that the following conditions are
met:

1) Redistributions must reproduce the above copyright notice and the
   following disclaimer in the documentation and/or other materials
   provided with the distribution.

2) Unless to the extent explicitly permitted by law, no reverse
   engineering, decompilation, or disassembly of this software is
   permitted.

3) Redistribution as part of a software development kit must include the
   accompanying file named "DEPENDENCIES" and any dependencies listed in
   that file.

4) Neither the name of the copyright holder nor the names of its
   contributors may be used to endorse or promote products derived from
   this software without specific prior written permission. 

Limited patent license. The copyright holders (and contributors) grant a
worldwide, non-exclusive, no-charge, royalty-free patent license to
make, have made, use, offer to sell, sell, import, and otherwise
transfer this software, where such license applies only to those patent
claims licensable by the copyright holders (and contributors) that are
necessarily infringed by this software. This patent license shall not
apply to any combinations that include this software.  No hardware is
licensed hereunder.

If you institute patent litigation against any entity (including a
cross-claim or counterclaim in a lawsuit) alleging that the software
itself infringes your patent(s), then your rights granted under this
license shall terminate as of the date such litigation is filed.

DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS." ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.