X-NUCLEO-NFC02A1 Dynamic NFC Tag Expansion Board Firmware Package

Diff: m24lr/M24LR.cpp

Revision:

6:8c1eca41b3a9

Child:

7:b876cdcf095a

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/m24lr/M24LR.cpp	Fri May 19 07:51:32 2017 +0000
@@ -0,0 +1,1022 @@
+/**
+  ******************************************************************************
+  * @file       m24lr.cpp
+  * @author     AMG Central Lab
+  * @version    V2.0.0
+  * @date       19 May 2017
+  * @brief      M24LR driver file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+
+
+#include "M24LR.h"
+
+uint8_t M24LR::NfctagInitialized = 0; 
+
+
+/**
+  * @brief  This function activate Energy Harvesting mode
+  */
+void M24LR::enable_energy_harvesting( void )
+{
+  /* Initialise M24LR Board */
+  
+    /* Enable Energy Harvesting */
+    i2c_set_EH( );
+
+    /* Store configuration in non Volatile Memory */
+    i2c_enable_EH_mode();
+    i2c_write_EH_cfg( M24LR_EH_Cfg_6MA );
+  
+}
+/**
+  * @brief  Set M24LR nfctag Initialization
+  * @param  None
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::initialization( void )
+{ 
+  uint8_t nfctag_id = 0;
+  
+  if( NfctagInitialized == 0 )
+  {
+    
+    /* M24LR Init */
+   if( i2c_init() != NFCTAG_OK )
+    {
+      return NFCTAG_ERROR;
+    }
+    
+    /* Check M24LR driver ID */
+   i2c_read_id(&nfctag_id);
+    if( (nfctag_id == I_AM_M24LR04) || (nfctag_id == I_AM_M24LR16) || (nfctag_id == I_AM_M24LR64) )
+    {
+      NfctagInitialized = 1;
+     // Nfctag_Drv = &M24lr_i2c_Drv;
+     // Nfctag_Drv->pData = &M24lr_i2c_ExtDrv;
+    }
+    else
+    {
+      NfctagInitialized = 0;
+     // Nfctag_Drv = NULL;
+     // NfctagInitialized = 0;
+      return NFCTAG_ERROR;
+    }
+  }
+  
+  return NFCTAG_OK;
+}
+
+/**
+  * @brief  Set M24LR Initialization
+  * @param  None
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_init( void )
+{
+  /* Configure the low level interface */
+  return(NFCTAG_OK);
+ // return mM24LR_IO.Init( );
+}
+
+/**
+  * @brief  Read M24LR ID
+  * @param  pICRef : pointer to store ID
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_read_id( uint8_t * const pData )
+{
+  uint8_t *pBuffer = (uint8_t *)pData;
+  NFCTAG_StatusTypeDef status;
+  /* Read ICRef on device */
+  //return M24LR_i2c_read_register( pICRef, M24LR_ICREF_REG, 1 );
+  /* Before calling this function M24LR must be ready, here is a check to detect an issue */
+   status = i2c_read_register(pBuffer, M24LR_ICREF_REG, 1);
+
+  if (status  == 0)
+    return NFCTAG_OK;
+  return NFCTAG_TIMEOUT;
+ 
+}
+
+/**
+  * @brief  Check M24LR availability
+  * @param  Trials : number of max tentative tried
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_is_device_ready( const uint32_t Trials )
+{
+  /* Test i2c with M24LR */
+ // return mM24LR_IO.IsDeviceReady( M24LR_ADDR_DATA_I2C, Trials );
+  uint8_t status = 1;
+  char buffer;
+  while (status != 0) {
+    /* for device is ready address in M24Lr is M24LR_ADDR_DATA_I2C */
+    status = dev_I2C.read(i2c_address_data, &buffer, 1, false);
+  }
+  if ( status == 0 )
+    return NFCTAG_OK;
+  else
+    return NFCTAG_TIMEOUT;
+  
+}
+
+/**
+  * @brief  Configure M24LR GPO
+  * @param  ITConf : 0x01 = RFBUSY, 0x02 = RFWIP
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_configure_GPO( const uint16_t ITConf )
+{
+  NFCTAG_StatusTypeDef status = NFCTAG_ERROR;
+  
+  /* Configure GPO function on M24LR */
+  if( (ITConf & M24LR_IT_BUSY_MASK) == M24LR_IT_BUSY_MASK )
+  {
+    status = i2c_setRF_Busy( );
+  }
+  else if( (ITConf & M24LR_IT_WIP_MASK) == M24LR_IT_WIP_MASK )
+  {
+    status = i2c_set_RF_WIP( );
+  }
+  return status;
+}
+
+/**
+  * @brief  Configure GPO as RF WriteInProgress
+  * @param  None
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_set_RF_WIP( void )
+{
+  uint8_t reg_value;
+  NFCTAG_StatusTypeDef status;
+  status = i2c_read_register(&reg_value, M24LR_CFG_REG, 1);
+  
+
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Update register value for WIP configuration */
+  reg_value |= M24LR_CFG_WIPBUSY_MASK;
+  
+  /* Write CFG register */
+  return i2c_write_register( &reg_value, M24LR_CFG_REG, 1 );
+}
+
+
+/**
+  * @brief  Get Configuration of M24LR GPO
+  * @param  GPOStatus : 0x01 = RFBUSY, 0x02 = RFWIP
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_get_GPO_status( uint16_t * const pGPOStatus )
+{
+  uint8_t reg_value;
+  NFCTAG_StatusTypeDef status;
+  
+  /* Read actual value of CFG register */
+  status = i2c_read_register( &reg_value, M24LR_CFG_REG, 1 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Extract RF WIP/BUSY information */
+  if( (reg_value & M24LR_CFG_WIPBUSY_MASK) == M24LR_CFG_WIPBUSY_MASK )
+  {
+    *pGPOStatus = M24LR_IT_WIP_MASK;
+  }
+  else
+  {
+    *pGPOStatus = M24LR_IT_BUSY_MASK;
+  }
+  
+  return NFCTAG_OK;
+}
+
+/**
+  * @brief  Read N bytes starting from specified I2C address
+  * @param  pData : pointer of the data to store
+  * @param  TarAddr : I2C data memory address to read
+  * @param  NbByte : number of bytes to read
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_read_data( uint8_t * const pData, const uint16_t TarAddr, const uint16_t NbByte )
+{  
+  int status;
+  /* Before calling this function M24LR must be ready, here is a check to detect an issue */
+  if( i2c_is_device_ready( 1 ) != NFCTAG_OK )
+  {
+    return NFCTAG_TIMEOUT;
+  }
+  /* Rosarium : To check M24LR_ADDR_DATA_I2C is this case */
+ /* return M24lr_IO_MemRead( pData, M24LR_ADDR_DATA_I2C, TarAddr, NbByte ); */
+   status = dev_I2C.i2c_read(pData, i2c_address_data, TarAddr, NbByte);
+    if ( status == 0 )
+    return NFCTAG_OK;
+  else
+    return NFCTAG_TIMEOUT;
+}
+
+/**
+  * @brief  Write N data bytes starting from specified I2C Address
+  * @brief  if I2C_Write_Lock bit = 0 or I2C_Password present => ack (modification OK)
+  * @brief  if I2C_Write_Lock bit = 1  and no I2C_Password present => No ack (no modification)
+  * @param  pData : pointer of the data to write
+  * @param  TarAddr : I2C data memory address to write
+  * @param  NbByte : number of bytes to write
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_write_data( const uint8_t * const pData, const uint16_t TarAddr, const uint16_t NbByte )
+{ 
+  int status;
+  uint8_t align_mem_offset;
+  uint16_t bytes_to_write = NbByte;
+  uint16_t mem_addr = TarAddr;
+  uint8_t *pdata_index = (uint8_t *)pData;
+  
+  /* Before calling this function M24LR must be ready, here is a check to detect an issue */
+  if( i2c_is_device_ready( 1 ) != NFCTAG_OK )
+  {
+    return NFCTAG_TIMEOUT;
+  }
+  
+  /* M24LR can write a maximum of 4 bytes in EEPROM per i2c communication */
+  do
+  {
+    /* To write data in M24LR, data must be aligned on the same row in memory */
+    /* align_mem_offset is used to copy only Bytes that are on the same row  in memory */
+    if( bytes_to_write > M24LR_PAGEWRITE_NBBYTE )
+    {
+      /* DataSize higher than max page write, copy data by page */
+      align_mem_offset = M24LR_PAGEWRITE_NBBYTE - (mem_addr % M24LR_PAGEWRITE_NBBYTE);
+    }
+    else
+    {
+      /* DataSize lower or equal to max page write, copy only last bytes */
+      align_mem_offset = bytes_to_write;
+    }
+    /* Write align_mem_offset bytes in memory */
+    /* Rosarium to Check as the address here is 0xA6 rather than 0xAE */
+    /* Rosarium dev_I2C.i2c_write(pdata_index, M24LR_ADDR_DATA_I2C, mem_addr, align_mem_offset); */
+    status = dev_I2C.i2c_write(pdata_index, i2c_address_data, mem_addr, align_mem_offset);
+    
+    /* update index, dest address, size for next write */
+    pdata_index += align_mem_offset;
+    mem_addr += align_mem_offset;
+    bytes_to_write -= align_mem_offset;
+    /* Poll until EEPROM is available */
+    while( i2c_is_device_ready( 1 ) != NFCTAG_OK ) {};
+  }
+  while( ( bytes_to_write > 0 ) && ( status == NFCTAG_OK ) );
+  if ( status == 0 )
+    return NFCTAG_OK;
+  else
+    return NFCTAG_ERROR;
+}
+
+/**
+  * @brief  Read N register bytes starting from specified I2C address
+  * @param  pData : pointer of the data to store
+  * @param  TarAddr : I2C memory address to read
+  * @param  NbByte : number of bytes to read
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_read_register( uint8_t * const pData, const uint16_t TarAddr, const uint16_t NbByte )
+{  
+  /* Before calling read function M24LR must be ready, here is a check to detect an issue */
+  int status;
+  
+  /* Before calling any read function M24LR must be ready, here is a check to detect an issue */
+  if( i2c_is_device_ready( 1 ) != NFCTAG_OK )
+  {
+    return NFCTAG_TIMEOUT;
+  }
+   /* Read actual value of register */
+  status = dev_I2C.i2c_read(pData, i2c_address_syst, TarAddr, NbByte);
+  
+    if ( status == 0 )
+    return NFCTAG_OK;
+  else
+    return NFCTAG_TIMEOUT;
+}
+
+/**
+  * @brief  Write N bytes to specific register
+  * @param  pData : pointer of the data to write
+  * @param  TarAddr : I2C register address to write
+  * @param  NbByte : number of bytes to write
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_write_register( const uint8_t * const pData, const uint16_t TarAddr, const uint16_t NbByte )
+{ 
+  int status;
+  uint8_t align_mem_offset;
+  uint16_t bytes_to_write = NbByte;
+  uint16_t mem_addr = TarAddr;
+  uint8_t *pdata_index = (uint8_t *)pData;
+  
+  /* Before calling this function M24LR must be ready, here is a check to detect an issue */
+  if( i2c_is_device_ready( 1 ) != NFCTAG_OK )
+  {
+    return NFCTAG_TIMEOUT;
+  }
+  
+  /* M24LR can write a maximum of 4 bytes in EEPROM per i2c communication */
+  do
+  {
+    /* To write data in M24LR, data must be aligned on the same row in memory */
+    /* align_mem_offset is used to copy only Bytes that are on the same row  in memory */
+    if( bytes_to_write > M24LR_PAGEWRITE_NBBYTE )
+    {
+      /* DataSize higher than max page write, copy data by page */
+      align_mem_offset = M24LR_PAGEWRITE_NBBYTE - (mem_addr % M24LR_PAGEWRITE_NBBYTE);
+    }
+    else
+    {
+      /* DataSize lower or equal to max page write, copy only last bytes */
+      align_mem_offset = bytes_to_write;
+    }
+    /* Write align_mem_offset bytes in register */
+   // status = M24lr_IO_MemWrite( pdata_index, M24LR_ADDR_SYST_I2C, mem_addr, align_mem_offset );
+    status = dev_I2C.i2c_write(pdata_index, i2c_address_syst, mem_addr, align_mem_offset);
+    /* update index, dest address, size for next write */
+    pdata_index += align_mem_offset;
+    mem_addr += align_mem_offset;
+    bytes_to_write -= align_mem_offset;
+    /* Poll until EEPROM is available */
+    while( i2c_is_device_ready( 1 ) != NFCTAG_OK ) {};
+  }
+  while( ( bytes_to_write > 0 ) && ( status == NFCTAG_OK ) );
+  
+    if ( status == 0 )
+    return NFCTAG_OK;
+  else
+    return NFCTAG_ERROR;
+}
+
+/**
+  * @brief  Read M24LR UID
+  * @param  UID : M24LR_UID pointer of the UID to store
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_read_UID( M24LR_UID * const pUid )
+{
+  uint8_t areg_value[8];
+  uint8_t i;
+  NFCTAG_StatusTypeDef status;
+  
+  /* Read actual value of UID registers */
+  status = i2c_read_register( areg_value, M24LR_UID_REG, 8 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Store information in 2 WORD */
+  pUid->MSB_UID = 0;
+  
+  for( i = 0; i < 4; i++ )
+  {
+    pUid->MSB_UID = (pUid->MSB_UID << 8) | areg_value[7 - i];
+  }
+  
+  pUid->LSB_UID = 0;
+  
+  for( i = 0; i < 4; i++ )
+  {
+    pUid->LSB_UID = (pUid->LSB_UID << 8) | areg_value[3 - i];
+  }
+  
+  return NFCTAG_OK;
+}
+
+/**
+  * @brief  Read DSFID
+  * @param  pData : pointer of the DSFID to store
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_read_DSFID( uint8_t * const pDsfid )
+{
+  /* Read actual value of DSFID register */
+  return i2c_read_register( pDsfid, M24LR_DSFID_REG, 1 );
+}
+
+/**
+  * @brief  Read AFI
+  * @param  pData : pointer of the AFI to store
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_read_AFI( uint8_t * const pAfi )
+{
+  /* Read actual value of AFI register */
+  return i2c_read_register( pAfi, M24LR_AFI_REG, 1 );
+}
+
+/**
+  * @brief  Read status of I2C Lock Sectors
+  * @param  Lock_sector : M24LR_Lock_Sectors pointer of the I2c lock sector status to store
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_read_I2C_lock_sector( M24LR_Lock_Sectors * const pLock_sector )
+{
+  uint8_t areg_value[8];
+  NFCTAG_StatusTypeDef status;
+
+  /* Read actual value of I2c Write Lock registers */
+  status = i2c_read_register( areg_value, M24LR_LOCK_REG, 8 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Dispatch information to corresponding struct member */
+  pLock_sector->sectors_63_56 = areg_value[7];
+  pLock_sector->sectors_55_48 = areg_value[6];
+  pLock_sector->sectors_47_40 = areg_value[5];
+  pLock_sector->sectors_39_32 = areg_value[4];
+  pLock_sector->sectors_31_24 = areg_value[3];
+  pLock_sector->sectors_23_16 = areg_value[2];
+  pLock_sector->sectors_15_8 = areg_value[1];
+  pLock_sector->sectors_7_0 = areg_value[0];
+  
+  return NFCTAG_OK;
+}
+
+/**
+  * @brief  Lock I2C write on an EEPROM Sectors
+  * @brief  Need a presentation of I2C Password to be effective
+  * @param  Sector : EEPROM Sector number to lock (between 0 to 63)
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_I2C_lock_sector( const uint8_t Sector )
+{
+  NFCTAG_StatusTypeDef status;
+  uint8_t reg_value = 0;
+  uint16_t sector_write_lock_addr;
+  
+  /* Compute register address */
+  sector_write_lock_addr = M24LR_LOCK_REG | (Sector >> 3);
+  
+  /* Read actual WriteLockStatus */
+  status = i2c_read_register( &reg_value, sector_write_lock_addr, 1 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Compute and update new WriteLockStatus */
+  reg_value |= 1 << ( Sector % 8 );
+
+  /* Write WriteLock register */
+  return i2c_write_register( &reg_value, sector_write_lock_addr, 1 );
+}
+
+/**
+  * @brief  UnLock I2C write on a EEPROM Sector
+  * @brief  Need an presentation of I2C Password to be effective
+  * @param  pSector : EEPROM Sector number to unlock (between 0 to 63)
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_I2C_unlock_sector( const uint8_t Sector )
+{
+  NFCTAG_StatusTypeDef status;
+  uint8_t reg_value = 0;
+  uint16_t sector_write_lock_addr;
+  
+  /* Compute register address */
+  sector_write_lock_addr = M24LR_LOCK_REG | (Sector >> 3);
+  
+  /* Read actual WriteLockStatus */
+  status = i2c_read_register( &reg_value, sector_write_lock_addr, 1 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Compute and update new WriteLockStatus */
+  reg_value &= ~( 1 << ( Sector % 8 ) );
+
+  /* Write WriteLock register */
+  return i2c_write_register( &reg_value, sector_write_lock_addr, 1 );
+}
+
+/**
+  * @brief  Present I2C password, authorize I2C write
+  * @param  PassWord : Password value on 32bits
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_present_I2C_password( const uint32_t PassWord )
+{
+  uint8_t ai2c_message[9] = {0};
+  uint8_t i;
+  
+  /* Build I2C Message with Password + Validation code 0x09 + Password */
+  ai2c_message[4] = 0x09;
+  i = 0;
+  while( i < 4 )
+  {
+    ai2c_message[i] = ( PassWord >> (i * 8) ) & 0xFF;
+    ai2c_message[i + 5] = ( PassWord >> (i * 8) ) & 0xFF;
+    i++;
+  };
+  
+  /* Present password to M24LR */
+  return i2c_write_register( ai2c_message, M24LR_I2C_PWD_REG, 9 );
+}
+
+/**
+  * @brief  Write new I2C password
+  * @brief  Need to present good I2CPassword before using this function
+  * @param  PassWord : new I2C PassWord value on 32bits
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_write_I2C_password( const uint32_t PassWord )
+{
+  uint8_t ai2c_message[9] = {0};
+  uint8_t i;
+  
+  /* Build I2C Message with Password + Validation code 0x07 + Password */
+  ai2c_message[4] = 0x07;
+  i = 0;
+  while( i < 4 ) 
+  {
+    ai2c_message[i] = ( PassWord >> (i * 8) ) & 0xFF;
+    ai2c_message[i + 5] = ( PassWord >> (i * 8) ) & 0xFF;
+    i++;
+  };
+  
+  /* Write Password to register */
+  return i2c_write_register( ai2c_message, M24LR_I2C_PWD_REG, 9 );
+}
+
+/**
+  * @brief  Read SectorSecurityStatus (defining RF access allowed)
+  * @param  SectorNb : Sector number to get RF security status
+  * @param  pData : M24LR_SECTOR_SEC pointer of the data to store
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_read_SSSx( const uint8_t SectorNb, M24LR_SECTOR_SEC * const pData )
+{
+  uint8_t reg_value;
+  NFCTAG_StatusTypeDef status;
+  uint16_t sector_security_addr;
+  
+  /* Compute Sector Security register address */
+  sector_security_addr = M24LR_SSS_REG | SectorNb;
+  
+  /* Read actual value of SectorSecurityStatus register */
+  status = i2c_read_register( &reg_value, sector_security_addr, 1 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Extract Sector Security Status configuration */
+  pData->SectorLock = reg_value & M24LR_SSS_LOCK_MASK;
+  pData->RW_Protection = (reg_value & M24LR_SSS_RW_MASK) >> 1;
+  pData->PassCtrl = (reg_value & M24LR_SSS_PASSCTRL_MASK) >> 3;
+  
+  return NFCTAG_OK;
+}
+
+/**
+  * @brief  Write SectorSecurityStatus (defining RF access allowed)
+  * @brief  Need an presentation of I2C Password to be effective
+  * @param  SectorNb : Sector number to set RF security
+  * @param  pData : M24LR_SECTOR_SEC pointer of the data to write
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_write_SSSx( const uint8_t SectorNb, const M24LR_SECTOR_SEC * const pData )
+{
+  uint8_t reg_value;
+  uint16_t sector_security_addr;
+  
+  /* Compute Sector Security register address */
+  sector_security_addr = M24LR_SSS_REG | SectorNb;
+  
+  /* Update Sector Security Status */ 
+  reg_value = (pData->PassCtrl << 3) & M24LR_SSS_PASSCTRL_MASK;
+  reg_value |= ((pData->RW_Protection << 1) & M24LR_SSS_RW_MASK);
+  reg_value |= (pData->SectorLock & M24LR_SSS_LOCK_MASK);
+  
+  /* Write SectorSecurityStatus register */
+  return i2c_write_register( &reg_value, sector_security_addr, 1 );
+}
+
+/**
+  * @brief  Read Memory Size info
+  * @param  SizeInfo : M24LR_Mem_Size pointer of the data to store
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_read_mem_size( M24LR_Mem_Size * const pSizeInfo )
+{
+  uint8_t areg_value[3];
+  NFCTAG_StatusTypeDef status;
+  
+  /* Read actual value of Mem_Size register */
+  status = i2c_read_register( areg_value, M24LR_MEMSIZE_REG, 3 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Extract Mem information */
+  pSizeInfo->BlockSize = areg_value[2];
+  pSizeInfo->Mem_Size = areg_value[1];
+  pSizeInfo->Mem_Size = (pSizeInfo->Mem_Size << 8) | areg_value[0];
+
+  return NFCTAG_OK;
+}
+
+/**
+  * @brief  Get GPO Configuration status
+  * @param  Rf_Wip_Busy : M24LR_GPO_STATUS pointer of the data to store
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_get_RF_WIP_busy( M24LR_GPO_STATUS * const pRf_Wip_Busy )
+{
+  uint8_t reg_value;
+  NFCTAG_StatusTypeDef status;
+  
+  /* Read actual value of CFG register */
+  status = i2c_read_register( &reg_value, M24LR_CFG_REG, 1 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Extract RF WIP/BUSY information */
+  if( (reg_value & M24LR_CFG_WIPBUSY_MASK) == M24LR_CFG_WIPBUSY_MASK )
+  {
+    *pRf_Wip_Busy = M24LR_GPO_WIP;
+  }
+  else
+  {
+    *pRf_Wip_Busy = M24LR_GPO_BUSY;
+  }
+
+  return NFCTAG_OK;
+}
+
+/**
+  * @brief  Configure GPO as RF Busy
+  * @param  None
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_setRF_Busy( void )
+{
+  uint8_t reg_value;
+  int status;
+  
+  /* Read actual value of CFG register */
+  status = dev_I2C.i2c_read( &reg_value, i2c_address_syst, (uint16_t)M24LR_CFG_REG, 1 );
+  if( status != 0 )
+  {
+    return NFCTAG_TIMEOUT;
+  }
+  
+  /* Update register value for BUSY configuration */
+  reg_value &= !M24LR_CFG_WIPBUSY_MASK;
+  
+  /* Write CFG register */
+  status = i2c_write_register( &reg_value, M24LR_CFG_REG, 1 );
+  if ( status == 0 )
+    return NFCTAG_OK;
+  else
+    return NFCTAG_TIMEOUT;
+}
+
+
+/**
+  * @brief  Get Energy harvesting mode status
+  * @param  EH_mode : M24LR_EH_MODE_STATUS pointer of the data to store
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_read_EH_mode( M24LR_EH_MODE_STATUS * const pEH_mode )
+{
+  uint8_t reg_value;
+  NFCTAG_StatusTypeDef status;
+  
+  /* Read actual value of CFG register */
+  status = i2c_read_register( &reg_value, M24LR_CFG_REG, 1 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Extract EH_mode configuration */
+  if( (reg_value & M24LR_CFG_EHMODE_MASK) == M24LR_CFG_EHMODE_MASK )
+  {
+    *pEH_mode = M24LR_EH_MODE_DISABLE;
+  }
+  else
+  {
+    *pEH_mode = M24LR_EH_MODE_ENABLE;
+  }
+  
+  return NFCTAG_OK;
+}
+
+/**
+  * @brief  Enable Energy harvesting mode
+  * @param  None
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_enable_EH_mode( void )
+{
+  uint8_t reg_value;
+  NFCTAG_StatusTypeDef status;
+  
+  /* Read actual value of CFG register */
+  status = i2c_read_register( &reg_value, M24LR_CFG_REG, 1 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Update EH_mode */
+  reg_value &= ~M24LR_CFG_EHMODE_MASK;
+  
+  /* Write CFG register */
+  return i2c_write_register( &reg_value, M24LR_CFG_REG, 1 );
+}
+
+/**
+  * @brief  Disable Energy harvesting mode
+  * @param  None
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_disable_EH_mode( void )
+{
+  uint8_t reg_value;
+  NFCTAG_StatusTypeDef status;
+  
+  /* Read actual value of CFG register */
+  status = i2c_read_register( &reg_value, M24LR_CFG_REG, 1 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Update EH_mode */
+  reg_value |= M24LR_CFG_EHMODE_MASK;
+  
+  /* Write CFG register */
+  return i2c_write_register( &reg_value, M24LR_CFG_REG, 1 );
+}
+
+/**
+  * @brief  Read Vout sink current configuration status for Energy Harvesting
+  * @param  EH_Cfg : M24LR_EH_CFG_VOUT pointer of the data to store
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_read_EH_cfg( M24LR_EH_CFG_VOUT * const pEH_Cfg )
+{
+  uint8_t reg_value;
+  NFCTAG_StatusTypeDef status;
+  
+  /* Read actual value of CFG register */
+  status = i2c_read_register( &reg_value, M24LR_CFG_REG, 1 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Extract Vout configuration for EH information */
+  reg_value &= (M24LR_CFG_EHCFG1_MASK | M24LR_CFG_EHCFG0_MASK);
+  switch( reg_value )
+  {
+    case 0:
+      *pEH_Cfg = M24LR_EH_Cfg_6MA;
+      break;
+    case 1:
+      *pEH_Cfg = M24LR_EH_Cfg_3MA;
+      break;
+    case 2:
+      *pEH_Cfg = M24LR_EH_Cfg_1MA;
+      break;
+    case 3:
+      *pEH_Cfg = M24LR_EH_Cfg_300UA;
+      break;
+    
+    default:
+      *pEH_Cfg = M24LR_EH_Cfg_6MA;
+  } 
+  
+  return NFCTAG_OK;
+}
+
+/**
+  * @brief  Write Vout sink current configuration status for Energy Harvesting
+  * @param  EH_Cfg : M24LR_EH_CFG_VOUT value to configure Vout
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_write_EH_cfg( const M24LR_EH_CFG_VOUT EH_Cfg )
+{
+  uint8_t reg_value;
+  NFCTAG_StatusTypeDef status;
+  
+  /* Read actual value of CFG register */
+  status = i2c_read_register( &reg_value, M24LR_CFG_REG, 1 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Update Vout configuration */
+  reg_value &= ~(M24LR_CFG_EHCFG1_MASK | M24LR_CFG_EHCFG0_MASK);
+  reg_value |= EH_Cfg;
+  
+  /* Write CFG register */
+  return i2c_write_register( &reg_value, M24LR_CFG_REG, 1 );
+}
+
+/**
+  * @brief  Get Energy Harvesting status
+  * @param  EH_Val : M24LR_EH_STATUS pointer of the data to store
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_get_EH( M24LR_EH_STATUS * const pEH_Val )
+{
+  uint8_t reg_value;
+  NFCTAG_StatusTypeDef status;
+  
+  /* Read actual value of CTRL register */
+  status = i2c_read_register( &reg_value, M24LR_CTRL_REG, 1 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Extract EH information */
+  if( (reg_value & M24LR_CTRL_EHEN_MASK) == M24LR_CTRL_EHEN_MASK )
+  {
+    *pEH_Val = M24LR_EH_ENABLE;
+  }
+  else
+  {
+    *pEH_Val = M24LR_EH_DISABLE;
+  }
+  
+  return NFCTAG_OK;
+}
+
+/**
+  * @brief  Enable Energy Harvesting
+  * @param  None
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_set_EH( void )
+{
+  uint8_t reg_value;
+  NFCTAG_StatusTypeDef status;
+  
+  /* Read actual value of CTRL register */
+  status = i2c_read_register( &reg_value, M24LR_CTRL_REG, 1 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Update EH configuration */
+  reg_value |= M24LR_CTRL_EHEN_MASK;
+  
+  /* Write CTRL Register */
+  return i2c_write_register( &reg_value, M24LR_CTRL_REG, 1 );
+}
+
+/**
+  * @brief  Disable Energy Harvesting
+  * @param  None
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_reset_EH( void )
+{
+  uint8_t reg_value;
+  NFCTAG_StatusTypeDef status;
+  
+  /* Read actual value of CTRL register */
+  status = i2c_read_register( &reg_value, M24LR_CTRL_REG, 1 );
+  if( status != NFCTAG_OK )
+  {
+    return status;
+  }
+  
+  /* Update EH configuration */
+  reg_value &= ~M24LR_CTRL_EHEN_MASK;
+  
+  /* Write CTRL register */
+  return i2c_write_register( &reg_value, M24LR_CTRL_REG, 1 );
+}
+
+/**
+  * @brief  Check if RF Field is present in front of M24LR
+  * @param  pRF_Field :  M24LR_FIELD_STATUS pointer of the data to store
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_get_RF_field( M24LR_FIELD_STATUS * const pRF_Field )
+{
+  NFCTAG_StatusTypeDef status;
+  uint8_t reg_value = 0;
+  
+  /* Read actual value of CTRL register */
+  status = i2c_read_register( &reg_value, M24LR_CTRL_REG, 1 );
+  
+  /* Extract RF Field information */
+  if( status == NFCTAG_OK )
+  {
+    if( (reg_value & M24LR_CTRL_FIELD_MASK) == M24LR_CTRL_FIELD_MASK )
+    {
+      *pRF_Field = M24LR_FIELD_ON;
+    }
+    else
+    {
+      *pRF_Field = M24LR_FIELD_OFF;
+    }
+    
+    return NFCTAG_OK;
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Check if Write Timing is good
+  * @param  pT_Prog : M24LR_T_PROG_STATUS pointer of the data to store
+  * @retval NFCTAG enum status
+  */
+NFCTAG_StatusTypeDef M24LR::i2c_get_TProg( M24LR_T_PROG_STATUS * const pT_Prog )
+{
+  NFCTAG_StatusTypeDef status;
+  uint8_t reg_value = 0;
+  
+  /* Read actual value of CTRL register */
+  status = i2c_read_register( &reg_value, M24LR_CTRL_REG, 1 );
+  
+  /* Extract T-Prog information */
+  if( status == NFCTAG_OK )
+  {
+    if( (reg_value & M24LR_CTRL_TPROG_MASK) == M24LR_CTRL_TPROG_MASK )
+    {
+      *pT_Prog = M24LR_T_PROG_OK;
+    }
+    else
+    {
+      *pT_Prog = M24LR_T_PROG_NO;
+    }
+
+    return NFCTAG_OK;
+  }
+  else
+    return status;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2016 STMicroelectronics *****END OF FILE****/