BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: source/BlueNRGDevice.cpp
- Branch:
- 8247cc25d48b37d6a78a3e91c728cbbf0fd9ba29
- Revision:
- 293:5a1f577bf92f
- Parent:
- 278:a5209d8cfd61
diff -r 6908f86aa1f9 -r 5a1f577bf92f source/BlueNRGDevice.cpp --- a/source/BlueNRGDevice.cpp Thu Sep 15 10:51:59 2016 +0100 +++ b/source/BlueNRGDevice.cpp Thu Sep 15 10:52:00 2016 +0100 @@ -47,14 +47,14 @@ #include "BlueNRGGattServer.h" #include "btle.h" -#include "Utils.h" -#include "osal.h" +#include "ble_utils.h" +#include "ble_osal.h" -#include "debug.h" +#include "ble_debug.h" #include "stm32_bluenrg_ble.h" extern "C" { - #include "hci.h" + #include "ble_hci.h" #include "bluenrg_utils.h" }