BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
source/BlueNRGDiscoveredCharacteristic.cpp
- Committer:
- Andrea Palmieri
- Date:
- 2016-05-16
- Revision:
- 229:9981f62cdb1a
- Parent:
- 132:51056160fa4a
- Child:
- 259:323f588e5f57
File content as of revision 229:9981f62cdb1a:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "BlueNRGDiscoveredCharacteristic.h" #include "BlueNRGGattClient.h" void BlueNRGDiscoveredCharacteristic::setup(BlueNRGGattClient *gattcIn, Gap::Handle_t connectionHandleIn, DiscoveredCharacteristic::Properties_t propsIn, GattAttribute::Handle_t declHandleIn, GattAttribute::Handle_t valueHandleIn, GattAttribute::Handle_t lastHandleIn) { gattc = gattcIn; connHandle = connectionHandleIn; declHandle = declHandleIn; valueHandle = valueHandleIn; lastHandle = lastHandleIn; props._broadcast = propsIn.broadcast(); props._read = propsIn.read(); props._writeWoResp = propsIn.writeWoResp(); props._write = propsIn.write(); props._notify = propsIn.notify(); props._indicate = propsIn.indicate(); props._authSignedWrite = propsIn.authSignedWrite(); } void BlueNRGDiscoveredCharacteristic::setup(BlueNRGGattClient *gattcIn, Gap::Handle_t connectionHandleIn, UUID uuidIn, DiscoveredCharacteristic::Properties_t propsIn, GattAttribute::Handle_t declHandleIn, GattAttribute::Handle_t valueHandleIn, GattAttribute::Handle_t lastHandleIn) { gattc = gattcIn; connHandle = connectionHandleIn; uuid = uuidIn; declHandle = declHandleIn; valueHandle = valueHandleIn; lastHandle = lastHandleIn; props._broadcast = propsIn.broadcast(); props._read = propsIn.read(); props._writeWoResp = propsIn.writeWoResp(); props._write = propsIn.write(); props._notify = propsIn.notify(); props._indicate = propsIn.indicate(); props._authSignedWrite = propsIn.authSignedWrite(); }