BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: module.json
- Revision:
- 131:e09947216ccb
- Parent:
- 130:770ce14d3d15
- Child:
- 132:51056160fa4a
--- a/module.json Tue Oct 06 14:25:08 2015 +0200 +++ b/module.json Tue Oct 06 15:19:19 2015 +0200 @@ -20,10 +20,10 @@ ], "extraIncludes": [ "x-nucleo-idb0xa1", - "x-nucleo-idb0xa1/BlueNRG_HCI/include", - "x-nucleo-idb0xa1/x-nucleo-idb0xa1/platform/inc", - "x-nucleo-idb0xa1/x-nucleo-idb0xa1/platform/X-NUCLEO-IDB04A1", - "x-nucleo-idb0xa1/x-nucleo-idb0xa1/utils/inc" + "x-nucleo-idb0xa1/utils/inc", + "x-nucleo-idb0xa1/platform/inc", + "x-nucleo-idb0xa1/BlueNRG_HCI/includes", + "x-nucleo-idb0xa1/platform/X-NUCLEO-IDB04A1" ], "dependencies": { "ble": "*"