BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: x-nucleo-idb0xa1/BlueNRGGap.h
- Branch:
- 9bb31e3d89ab51aca24fe8b1162853fbc70fe791
- Revision:
- 270:ca649990a830
- Parent:
- 256:146bb175ce80
- Child:
- 272:4639da7705e1
--- a/x-nucleo-idb0xa1/BlueNRGGap.h Thu Sep 15 10:51:31 2016 +0100 +++ b/x-nucleo-idb0xa1/BlueNRGGap.h Thu Sep 15 10:51:32 2016 +0100 @@ -66,10 +66,6 @@ #define MAX_INT_CONN 0x0C80 //=>4000msec #define DEF_INT_CONN 0x0140 //=>400msec (default value for connection interval) -#define LOCAL_NAME_MAX_SIZE 9 //8 + 1(AD_DATA_TYPE) -#define UUID_BUFFER_SIZE 17 //Either 8*2(16-bit UUIDs) or 4*4(32-bit UUIDs) or 1*16(128-bit UUIDs) +1(AD_DATA_TYPE) -#define ADV_DATA_MAX_SIZE 31 - /**************************************************************************/ /*! \brief @@ -166,23 +162,9 @@ bool isSetAddress; uint8_t deviceAppearance[2]; - uint8_t local_name_length; - uint8_t local_name[ADV_DATA_MAX_SIZE];//LOCAL_NAME_MAX_SIZE]; - - uint8_t servUuidlength; - uint8_t servUuidData[UUID_BUFFER_SIZE]; - - uint8_t AdvLen; - uint8_t AdvData[ADV_DATA_MAX_SIZE]; - - uint8_t txPowLevSet; - Timeout advTimeout; bool AdvToFlag; - const uint8_t *scan_response_payload; - uint8_t scan_rsp_length; - static uint16_t SCAN_DURATION_UNITS_TO_MSEC(uint16_t duration) { return (duration * 625) / 1000; } @@ -204,7 +186,7 @@ ble_error_t updateAdvertisingData(void); - BlueNRGGap(): txPowLevSet(0) { + BlueNRGGap() { m_connectionHandle = BLE_CONN_HANDLE_INVALID; addr_type = BLEProtocol::AddressType::RANDOM_STATIC; @@ -220,6 +202,7 @@ void operator=(BlueNRGGap const &); GapAdvertisingData _advData; + GapAdvertisingData _scanResponse; }; #endif // ifndef __BLUENRG_GAP_H__ \ No newline at end of file