BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: x-nucleo-idb0xa1/BlueNRGGap.h
- Branch:
- a8af514bf03daac81073325025db2c98e2151a34
- Revision:
- 256:146bb175ce80
- Parent:
- 255:97adb68decd4
- Child:
- 270:ca649990a830
--- a/x-nucleo-idb0xa1/BlueNRGGap.h Thu Sep 15 10:51:17 2016 +0100 +++ b/x-nucleo-idb0xa1/BlueNRGGap.h Thu Sep 15 10:51:18 2016 +0100 @@ -153,6 +153,8 @@ virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams); + void setConnectionInterval(uint16_t interval); + private: uint16_t m_connectionHandle; AddressType_t addr_type;