BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: source/BlueNRGGap.cpp
- Branch:
- sync_with_github
- Revision:
- 265:46333d70cf81
- Parent:
- 254:f4d217cadbde
- Child:
- 276:a20f4cad1d61
--- a/source/BlueNRGGap.cpp Thu Sep 15 10:51:17 2016 +0100 +++ b/source/BlueNRGGap.cpp Thu Sep 15 10:51:27 2016 +0100 @@ -839,7 +839,7 @@ @endcode */ /**************************************************************************/ -ble_error_t BlueNRGGap::getAddress(AddressType_t *typeP, Address_t address) +ble_error_t BlueNRGGap::getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) { uint8_t bdaddr[BDADDR_SIZE]; uint8_t data_len_out;