BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: module.json
- Revision:
- 176:33edcdbe9ce6
- Parent:
- 174:8bcd1bf2331f
- Child:
- 183:3bc6d59b9c81
- Child:
- 192:6274f9fa3306
--- a/module.json Thu Nov 12 14:24:15 2015 +0100 +++ b/module.json Fri Nov 13 16:31:14 2015 +0100 @@ -8,10 +8,10 @@ ], "author": "Andrea Palmieri", "repository": { - "url": "ssh://gitolite@codex.cro.st.com/x-nucleodev/x-nucleo-idb0xa1-mbedos.git", + "url": "https://github.com/ARMmbed/ble-x-nucleo-idb0xa1.git", "type": "git" }, - "homepage": "http://www.st.com", + "homepage": "https://github.com/ARMmbed/ble-x-nucleo-idb0xa1", "licenses": [ { "url": "https://spdx.org/licenses/Apache-2.0",