File content as of revision 5:ccf7f36492ae:

/**
 ******************************************************************************
 * @file    HTS221Sensor.cpp
 * @author  CLab
 * @version V1.0.0
 * @date    5 August 2016
 * @brief   Implementation of an HTS221 Humidity and Temperature sensor.
 ******************************************************************************
 * @attention
 *
 * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *   1. Redistributions of source code must retain the above copyright notice,
 *      this list of conditions and the following disclaimer.
 *   2. Redistributions in binary form must reproduce the above copyright notice,
 *      this list of conditions and the following disclaimer in the documentation
 *      and/or other materials provided with the distribution.
 *   3. Neither the name of STMicroelectronics nor the names of its contributors
 *      may be used to endorse or promote products derived from this software
 *      without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 ******************************************************************************
 */


/* Includes ------------------------------------------------------------------*/


#include "HTS221Sensor.h"


/* Class Implementation ------------------------------------------------------*/

HTS221Sensor::HTS221Sensor(SPI *spi, PinName cs_pin, PinName drdy_pin) :
    _dev_spi(spi), _cs_pin(cs_pin), _drdy_pin(drdy_pin)  // SPI3W ONLY
{
    assert(spi);
    _dev_i2c = NULL;
};

/** Constructor
 * @param i2c object of an helper class which handles the I2C peripheral
 * @param address the address of the component's instance
 */
HTS221Sensor::HTS221Sensor(DevI2C *i2c, uint8_t address, PinName drdy_pin) :
    _dev_i2c(i2c), _address(address), _cs_pin(NC), _drdy_pin(drdy_pin)
{
    assert(i2c);
    _dev_spi = NULL;
};

/**
 * @brief     Initializing the component.
 * @param[in] init pointer to device specific initalization structure.
 * @retval    "0" in case of success, an error code otherwise.
 */
int HTS221Sensor::init(void *init)
{
    /* Power down the device */
    if (HTS221_DeActivate((void *)this) == HTS221_ERROR) {
        return 1;
    }

    /* Enable BDU */
    if (HTS221_Set_BduMode((void *)this, HTS221_ENABLE) == HTS221_ERROR) {
        return 1;
    }

    if (set_odr(1.0f) == 1) {
        return 1;
    }

    return 0;
}

/**
 * @brief  Enable HTS221
 * @retval 0 in case of success, an error code otherwise
 */
int HTS221Sensor::enable(void)
{
    /* Power up the device */
    if (HTS221_Activate((void *)this) == HTS221_ERROR) {
        return 1;
    }

    return 0;
}

/**
 * @brief  Disable HTS221
 * @retval 0 in case of success, an error code otherwise
 */
int HTS221Sensor::disable(void)
{
    /* Power up the device */
    if (HTS221_DeActivate((void *)this) == HTS221_ERROR) {
        return 1;
    }

    return 0;
}

/**
 * @brief  Read ID address of HTS221
 * @param  id the pointer where the ID of the device is stored
 * @retval 0 in case of success, an error code otherwise
 */
int HTS221Sensor::read_id(uint8_t *id)
{
    if (!id) {
        return 1;
    }

    /* Read WHO AM I register */
    if (HTS221_Get_DeviceID((void *)this, id) == HTS221_ERROR) {
        return 1;
    }

    return 0;
}

/**
 * @brief  Reboot memory content of HTS221
 * @param  None
 * @retval 0 in case of success, an error code otherwise
 */
int HTS221Sensor::reset(void)
{
    uint8_t tmpreg;

    /* Read CTRL_REG2 register */
    if (read_reg(HTS221_CTRL_REG2, &tmpreg) != 0) {
        return 1;
    }

    /* Enable or Disable the reboot memory */
    tmpreg |= (0x01 << HTS221_BOOT_BIT);

    /* Write value to MEMS CTRL_REG2 regsister */
    if (write_reg(HTS221_CTRL_REG2, tmpreg) != 0) {
        return 1;
    }

    return 0;
}

/**
 * @brief  Read HTS221 output register, and calculate the humidity
 * @param  pfData the pointer to data output
 * @retval 0 in case of success, an error code otherwise
 */
int HTS221Sensor::get_humidity(float *pfData)
{
    uint16_t uint16data = 0;

    /* Read data from HTS221. */
    if (HTS221_Get_Humidity((void *)this, &uint16data) == HTS221_ERROR) {
        return 1;
    }

    *pfData = (float)uint16data / 10.0f;

    return 0;
}

/**
 * @brief  Read HTS221 output register, and calculate the temperature
 * @param  pfData the pointer to data output
 * @retval 0 in case of success, an error code otherwise
 */
int HTS221Sensor::get_temperature(float *pfData)
{
    int16_t int16data = 0;

    /* Read data from HTS221. */
    if (HTS221_Get_Temperature((void *)this, &int16data) == HTS221_ERROR) {
        return 1;
    }

    *pfData = (float)int16data / 10.0f;

    return 0;
}

/**
 * @brief  Read HTS221 output register, and calculate the humidity
 * @param  odr the pointer to the output data rate
 * @retval 0 in case of success, an error code otherwise
 */
int HTS221Sensor::get_odr(float *odr)
{
    HTS221_Odr_et odr_low_level;

    if (HTS221_Get_Odr((void *)this, &odr_low_level) == HTS221_ERROR) {
        return 1;
    }

    switch (odr_low_level) {
        case HTS221_ODR_ONE_SHOT:
            *odr =  0.0f;
            break;
        case HTS221_ODR_1HZ     :
            *odr =  1.0f;
            break;
        case HTS221_ODR_7HZ     :
            *odr =  7.0f;
            break;
        case HTS221_ODR_12_5HZ  :
            *odr = 12.5f;
            break;
        default                 :
            *odr = -1.0f;
            return 1;
    }

    return 0;
}

/**
 * @brief  Set ODR
 * @param  odr the output data rate to be set
 * @retval 0 in case of success, an error code otherwise
 */
int HTS221Sensor::set_odr(float odr)
{
    HTS221_Odr_et new_odr;

    new_odr = (odr <= 1.0f) ? HTS221_ODR_1HZ
              : (odr <= 7.0f) ? HTS221_ODR_7HZ
              :                   HTS221_ODR_12_5HZ;

    if (HTS221_Set_Odr((void *)this, new_odr) == HTS221_ERROR) {
        return 1;
    }

    return 0;
}


/**
 * @brief Read the data from register
 * @param reg register address
 * @param data register data
 * @retval 0 in case of success
 * @retval 1 in case of failure
 */
int HTS221Sensor::read_reg(uint8_t reg, uint8_t *data)
{

    if (HTS221_read_reg((void *)this, reg, 1, data) == HTS221_ERROR) {
        return 1;
    }

    return 0;
}

/**
 * @brief Write the data to register
 * @param reg register address
 * @param data register data
 * @retval 0 in case of success
 * @retval 1 in case of failure
 */
int HTS221Sensor::write_reg(uint8_t reg, uint8_t data)
{

    if (HTS221_write_reg((void *)this, reg, 1, &data) == HTS221_ERROR) {
        return 1;
    }

    return 0;
}

uint8_t HTS221_io_write(void *handle, uint8_t WriteAddr, uint8_t *pBuffer, uint16_t nBytesToWrite)
{
    return ((HTS221Sensor *)handle)->io_write(pBuffer, WriteAddr, nBytesToWrite);
}

uint8_t HTS221_io_read(void *handle, uint8_t ReadAddr, uint8_t *pBuffer, uint16_t nBytesToRead)
{
    return ((HTS221Sensor *)handle)->io_read(pBuffer, ReadAddr, nBytesToRead);
}