Revision 7:bfe8272ced90, committed 2019-09-24

Comitter:

jeromecoutant

Date:

Tue Sep 24 15:30:09 2019 +0200

Parent:

6:9dfa42666f03

Commit message:

Update BSP files with STM32Cube L4 V1.14.0

Changed in this revision

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01.c
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01.c	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01.c	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -66,7 +40,7 @@
    */
 #define __STM32L475E_IOT01_BSP_VERSION_MAIN   (0x01) /*!< [31:24] main version */
 #define __STM32L475E_IOT01_BSP_VERSION_SUB1   (0x01) /*!< [23:16] sub1 version */
-#define __STM32L475E_IOT01_BSP_VERSION_SUB2   (0x01) /*!< [15:8]  sub2 version */
+#define __STM32L475E_IOT01_BSP_VERSION_SUB2   (0x04) /*!< [15:8]  sub2 version */
 #define __STM32L475E_IOT01_BSP_VERSION_RC     (0x00) /*!< [7:0]  release candidate */
 #define __STM32L475E_IOT01_BSP_VERSION        ((__STM32L475E_IOT01_BSP_VERSION_MAIN << 24)\
                                                  |(__STM32L475E_IOT01_BSP_VERSION_SUB1 << 16)\
@@ -153,7 +127,7 @@
 
 /**
   * @brief  This method returns the STM32L475E IOT01 BSP Driver revision
-  * @retval version: 0xXYZR (8bits for each decimal, R for RC)
+  * @retval version  0xXYZR (8bits for each decimal, R for RC)
   */
 uint32_t BSP_GetVersion(void)
 {
@@ -161,10 +135,10 @@
 }
 
 /**
-  * @brief  Configures LEDs.
-  * @param  Led: LED to be configured. 
-  *          This parameter can be one of the following values:
-  *            @arg  LED2
+  * @brief  Initializes LED GPIO.
+  * @param  Led  LED to be initialized. 
+  *              This parameter can be one of the following values:
+  *                @arg  DISCO_LED2
   */
 void BSP_LED_Init(Led_TypeDef Led)
 {
@@ -181,10 +155,10 @@
 }
 
 /**
-  * @brief  DeInit LEDs.
-  * @param  Led: LED to be configured. 
-  *          This parameter can be one of the following values:
-  *            @arg  LED2
+  * @brief  DeInitializes LED GPIO.
+  * @param  Led  LED to be deinitialized. 
+  *              This parameter can be one of the following values:
+  *                @arg  DISCO_LED2
   */
 void BSP_LED_DeInit(Led_TypeDef Led)
 {
@@ -199,10 +173,10 @@
 }
 
 /**
-  * @brief  Turns selected LED On.
-  * @param  Led: LED to be set on 
-  *          This parameter can be one of the following values:
-  *            @arg  LED2
+  * @brief  Turns the selected LED On.
+  * @param  Led  LED to be set on 
+  *              This parameter can be one of the following values:
+  *                @arg  DISCO_LED2
   */
 void BSP_LED_On(Led_TypeDef Led)
 {
@@ -210,10 +184,10 @@
 }
 
 /**
-  * @brief  Turns selected LED Off. 
-  * @param  Led: LED to be set off
-  *          This parameter can be one of the following values:
-  *            @arg  LED2
+  * @brief  Turns the selected LED Off. 
+  * @param  Led  LED to be set off
+  *              This parameter can be one of the following values:
+  *                @arg  DISCO_LED2
   */
 void BSP_LED_Off(Led_TypeDef Led)
 {
@@ -222,9 +196,9 @@
 
 /**
   * @brief  Toggles the selected LED.
-  * @param  Led: LED to be toggled
-  *          This parameter can be one of the following values:
-  *            @arg  LED2
+  * @param  Led  LED to be toggled
+  *              This parameter can be one of the following values:
+  *                @arg  DISCO_LED2
   */
 void BSP_LED_Toggle(Led_TypeDef Led)
 {
@@ -232,15 +206,15 @@
 }
 
 /**
-  * @brief  Configures button GPIO and EXTI Line.
-  * @param  Button: Button to be configured
-  *          This parameter can be one of the following values:
-  *            @arg  BUTTON_WAKEUP: Wakeup Push Button
-  * @param  ButtonMode: Button mode
-  *          This parameter can be one of the following values:
-  *            @arg  BUTTON_MODE_GPIO: Button will be used as simple IO
-  *            @arg  BUTTON_MODE_EXTI: Button will be connected to EXTI line 
-  *                                    with interrupt generation capability  
+  * @brief  Initializes push button GPIO and EXTI Line.
+  * @param  Button  Button to be configured
+  *                 This parameter can be one of the following values:
+  *                   @arg  BUTTON_USER  User Push Button
+  * @param  ButtonMode Button mode
+  *                    This parameter can be one of the following values:
+  *                      @arg  BUTTON_MODE_GPIO  Button will be used as simple IO
+  *                      @arg  BUTTON_MODE_EXTI  Button will be connected to EXTI line 
+  *                                              with interrupt generation capability  
   */
 void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode)
 {
@@ -277,10 +251,10 @@
 }
 
 /**
-  * @brief  Push Button DeInit.
-  * @param  Button: Button to be configured
-  *          This parameter can be one of the following values:
-  *            @arg  BUTTON_WAKEUP: Wakeup Push Button 
+  * @brief  DeInitializes push button.
+  * @param  Button  Button to be configured
+  *                 This parameter can be one of the following values:
+  *                   @arg  BUTTON_USER  User Push Button 
   * @note PB DeInit does not disable the GPIO clock
   */
 void BSP_PB_DeInit(Button_TypeDef Button)
@@ -295,9 +269,9 @@
 
 /**
   * @brief  Returns the selected button state.
-  * @param  Button: Button to be checked
-  *          This parameter can be one of the following values:
-  *            @arg  BUTTON_WAKEUP: Wakeup Push Button 
+  * @param  Button  Button to be checked
+  *                 This parameter can be one of the following values:
+  *                   @arg  BUTTON_USER  User Push Button 
   * @retval The Button GPIO pin value (GPIO_PIN_RESET = button pressed)
   */
 uint32_t BSP_PB_GetState(Button_TypeDef Button)
@@ -307,10 +281,10 @@
 
 /**
   * @brief  Configures COM port.
-  * @param  COM: COM port to be configured.
-  *          This parameter can be one of the following values:
-  *            @arg  COM1 
-  * @param  huart: Pointer to a UART_HandleTypeDef structure that contains the
+  * @param  COM  COM port to be initialized.
+  *              This parameter can be one of the following values:
+  *                @arg  COM1 
+  * @param  huart  Pointer to a UART_HandleTypeDef structure that contains the
   *                configuration information for the specified USART peripheral.
   */
 void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef *huart)
@@ -344,11 +318,11 @@
 }
 
 /**
-  * @brief  DeInit COM port.
-  * @param  COM: COM port to be configured.
-  *          This parameter can be one of the following values:
-  *            @arg  COM1 
-  * @param  huart: Pointer to a UART_HandleTypeDef structure that contains the
+  * @brief  DeInitializes COM port.
+  * @param  COM  COM port to be deinitialized.
+  *              This parameter can be one of the following values:
+  *                @arg  COM1 
+  * @param  huart  Pointer to a UART_HandleTypeDef structure that contains the
   *                configuration information for the specified USART peripheral.
   */
 void BSP_COM_DeInit(COM_TypeDef COM, UART_HandleTypeDef *huart)
@@ -375,7 +349,7 @@
 /******************************* I2C Routines *********************************/
 /**
   * @brief  Initializes I2C MSP.
-  * @param  i2c_handler : I2C handler
+  * @param  i2c_handler  I2C handler
   * @retval None
   */
 static void I2Cx_MspInit(I2C_HandleTypeDef *i2c_handler)
@@ -417,7 +391,7 @@
 
 /**
   * @brief  DeInitializes I2C MSP.
-  * @param  i2c_handler : I2C handler
+  * @param  i2c_handler  I2C handler
   * @retval None
   */
 static void I2Cx_MspDeInit(I2C_HandleTypeDef *i2c_handler)
@@ -436,7 +410,7 @@
 
 /**
   * @brief  Initializes I2C HAL.
-  * @param  i2c_handler : I2C handler
+  * @param  i2c_handler  I2C handler
   * @retval None
   */
 static void I2Cx_Init(I2C_HandleTypeDef *i2c_handler)
@@ -461,7 +435,7 @@
 
 /**
   * @brief  DeInitializes I2C HAL.
-  * @param  i2c_handler : I2C handler
+  * @param  i2c_handler  I2C handler
   * @retval None
   */
 static void I2Cx_DeInit(I2C_HandleTypeDef *i2c_handler)
@@ -472,12 +446,12 @@
 
 /**
   * @brief  Reads multiple data.
-  * @param  i2c_handler : I2C handler
-  * @param  Addr: I2C address
-  * @param  Reg: Reg address
-  * @param  MemAddress: memory address
-  * @param  Buffer: Pointer to data buffer
-  * @param  Length: Length of the data
+  * @param  i2c_handler  I2C handler
+  * @param  Addr  I2C address
+  * @param  Reg  Reg address
+  * @param  MemAddress  memory address
+  * @param  Buffer  Pointer to data buffer
+  * @param  Length  Length of the data
   * @retval HAL status
   */
 static HAL_StatusTypeDef I2Cx_ReadMultiple(I2C_HandleTypeDef *i2c_handler, uint8_t Addr, uint16_t Reg, uint16_t MemAddress, uint8_t *Buffer, uint16_t Length)
@@ -498,12 +472,12 @@
 
 /**
   * @brief  Writes a value in a register of the device through BUS in using DMA mode.
-  * @param  i2c_handler : I2C handler
-  * @param  Addr: Device address on BUS Bus.
-  * @param  Reg: The target register address to write
-  * @param  MemAddress: memory address
-  * @param  Buffer: The target register value to be written
-  * @param  Length: buffer size to be written
+  * @param  i2c_handler  I2C handler
+  * @param  Addr  Device address on BUS Bus.
+  * @param  Reg  The target register address to write
+  * @param  MemAddress  memory address
+  * @param  Buffer  The target register value to be written
+  * @param  Length  buffer size to be written
   * @retval HAL status
   */
 static HAL_StatusTypeDef I2Cx_WriteMultiple(I2C_HandleTypeDef *i2c_handler, uint8_t Addr, uint16_t Reg, uint16_t MemAddress, uint8_t *Buffer, uint16_t Length)
@@ -524,9 +498,9 @@
 /**
   * @brief  Checks if target device is ready for communication. 
   * @note   This function is used with Memory devices
-  * @param  i2c_handler : I2C handler
-  * @param  DevAddress: Target device address
-  * @param  Trials: Number of trials
+  * @param  i2c_handler  I2C handler
+  * @param  DevAddress  Target device address
+  * @param  Trials  Number of trials
   * @retval HAL status
   */
 static HAL_StatusTypeDef I2Cx_IsDeviceReady(I2C_HandleTypeDef *i2c_handler, uint16_t DevAddress, uint32_t Trials)
@@ -536,8 +510,8 @@
 
 /**
   * @brief  Manages error callback by re-initializing I2C.
-  * @param  i2c_handler : I2C handler
-  * @param  Addr: I2C Address
+  * @param  i2c_handler  I2C handler
+  * @param  Addr  I2C Address
   * @retval None
   */
 static void I2Cx_Error(I2C_HandleTypeDef *i2c_handler, uint8_t Addr)
@@ -578,9 +552,9 @@
 
 /**
   * @brief  Writes a single data.
-  * @param  Addr: I2C address
-  * @param  Reg: Reg address
-  * @param  Value: Data to be written
+  * @param  Addr  I2C address
+  * @param  Reg  Reg address
+  * @param  Value  Data to be written
   * @retval None
   */
 void SENSOR_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value)
@@ -590,8 +564,8 @@
 
 /**
   * @brief  Reads a single data.
-  * @param  Addr: I2C address
-  * @param  Reg: Reg address
+  * @param  Addr  I2C address
+  * @param  Reg  Reg address
   * @retval Data to be read
   */
 uint8_t SENSOR_IO_Read(uint8_t Addr, uint8_t Reg)
@@ -606,10 +580,10 @@
 /**
   * @brief  Reads multiple data with I2C communication
   *         channel from TouchScreen.
-  * @param  Addr: I2C address
-  * @param  Reg: Register address
-  * @param  Buffer: Pointer to data buffer
-  * @param  Length: Length of the data
+  * @param  Addr  I2C address
+  * @param  Reg  Register address
+  * @param  Buffer  Pointer to data buffer
+  * @param  Length  Length of the data
   * @retval HAL status
   */
 uint16_t SENSOR_IO_ReadMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length)
@@ -620,10 +594,10 @@
 /**
   * @brief  Writes multiple data with I2C communication
   *         channel from MCU to TouchScreen.
-  * @param  Addr: I2C address
-  * @param  Reg: Register address
-  * @param  Buffer: Pointer to data buffer
-  * @param  Length: Length of the data
+  * @param  Addr  I2C address
+  * @param  Reg  Register address
+  * @param  Buffer  Pointer to data buffer
+  * @param  Length  Length of the data
   * @retval None
   */
 void SENSOR_IO_WriteMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length)
@@ -634,8 +608,8 @@
 /**
   * @brief  Checks if target device is ready for communication. 
   * @note   This function is used with Memory devices
-  * @param  DevAddress: Target device address
-  * @param  Trials: Number of trials
+  * @param  DevAddress  Target device address
+  * @param  Trials  Number of trials
   * @retval HAL status
   */
 HAL_StatusTypeDef SENSOR_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials)
@@ -644,8 +618,8 @@
 }
 
 /**
-  * @brief  Delay function used in TouchScreen low level driver.
-  * @param  Delay: Delay in ms
+  * @brief  Delay function used in Sensor low level driver.
+  * @param  Delay  Delay in ms
   * @retval None
   */
 void SENSOR_IO_Delay(uint32_t Delay)
@@ -657,7 +631,7 @@
 
 /**
   * @brief  Initializes Sensors low level.
-  * @param  GpoIrqEnable: 0x0 is disable, otherwise enabled  
+  * @param  GpoIrqEnable  0x0 is disable, otherwise enabled  
   * @retval None
   */
 void NFC_IO_Init(uint8_t GpoIrqEnable)
@@ -709,10 +683,10 @@
 
 /**
   * @brief  This functions reads a response of the M24SR device
-  * @param  Addr: M24SR I2C address   (do we really need to add?)
-  * @param  pBuffer : Pointer on the buffer to retrieve M24SR response
-  * @param  Length: Length of the data
-  * @retval Status: Success or Timeout
+  * @param  Addr: M24SR I2C address   (do we really need to add??)
+  * @param  pBuffer  Pointer on the buffer to retrieve M24SR response
+  * @param  Length  Length of the data
+  * @retval Status  Success or Timeout
   */
 uint16_t NFC_IO_ReadMultiple (uint8_t Addr, uint8_t *pBuffer, uint16_t Length )
 {
@@ -735,10 +709,10 @@
 
 /**
   * @brief  This functions sends the command buffer 
-  * @param  Addr: M24SR I2C address   (do we really need to add?)
-  * @param  pBuffer : pointer to the buffer to send to the M24SR
-  * @param  Length: Length of the data
-  * @retval Status: Success or Timeout
+  * @param  Addr: M24SR I2C address   (do we really need to add??)
+  * @param  pBuffer  pointer to the buffer to send to the M24SR
+  * @param  Length  Length of the data
+  * @retval Status  Success or Timeout
   */
 uint16_t  NFC_IO_WriteMultiple (uint8_t Addr, uint8_t *pBuffer, uint16_t Length) 
 {
@@ -761,9 +735,9 @@
 
 /**
   * @brief  Checks if target device is ready for communication.
-  * @param  Addr: M24SR I2C address   (do we really need to add?)
-  * @param  Trials: Number of trials (currently not present in M24sr)
-  * @retval Status: Success or Timeout
+  * @param  Addr: M24SR I2C address   (do we really need to add??)
+  * @param  Trials  Number of trials (currently not present in M24sr)
+  * @retval Status  Success or Timeout
   */
 uint16_t   NFC_IO_IsDeviceReady (uint8_t Addr, uint32_t Trials)
 {
@@ -791,8 +765,7 @@
 
 /**
   * @brief  This function read the state of the M24SR GPO
-  * @param  none
-  * @retval GPIO_PinState : state of the M24SR GPO
+  * @retval GPIO_PinState  state of the M24SR GPO
   */
 void NFC_IO_ReadState(uint8_t * pPinState)
 {
@@ -800,8 +773,8 @@
 }
 
 /**
-  * @brief  This function set the state of the M24SR RF disable pin
-  * @param  PinState: put RF disable pin of M24SR in PinState (1 or 0)
+  * @brief  This function sets the state of the M24SR RF disable pin
+  * @param  PinState  put RF disable pin of M24SR in PinState (1 or 0)
   */
 void NFC_IO_RfDisable(uint8_t PinState)
 {
@@ -809,8 +782,8 @@
 }
 
 /**
-  * @brief  This function wait the time given in param (in milisecond)
-  * @param  Delay: Delay in ms
+  * @brief  Delay function used in M24SR low level driver.
+  * @param  Delay  Delay in ms
   * @retval None
   */
 void NFC_IO_Delay(uint32_t Delay)

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01.h
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_accelero.c
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_accelero.c	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_accelero.c	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_accelero.h
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_accelero.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_accelero.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_gyro.c
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_gyro.c	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_gyro.c	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_gyro.h
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_gyro.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_gyro.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_hsensor.c
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_hsensor.c	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_hsensor.c	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_hsensor.h
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_hsensor.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_hsensor.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_magneto.c
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_magneto.c	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_magneto.c	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_magneto.h
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_magneto.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_magneto.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_psensor.c
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_psensor.c	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_psensor.c	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_psensor.h
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_psensor.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_psensor.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_qspi.c
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_qspi.c	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_qspi.c	Tue Sep 24 15:30:09 2019 +0200
@@ -45,29 +45,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_qspi.h
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_qspi.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_qspi.h	Tue Sep 24 15:30:09 2019 +0200
@@ -7,29 +7,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_tsensor.c
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_tsensor.c	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_tsensor.c	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_tsensor.h
--- a/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_tsensor.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01_tsensor.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,39 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
   * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without
-  * modification, are permitted, provided that the following conditions are met:
-  *
-  * 1. Redistribution of source code must retain the above copyright notice,
-  *    this list of conditions and the following disclaimer.
-  * 2. Redistributions in binary form must reproduce the above copyright notice,
-  *    this list of conditions and the following disclaimer in the documentation
-  *    and/or other materials provided with the distribution.
-  * 3. Neither the name of STMicroelectronics nor the names of other
-  *    contributors to this software may be used to endorse or promote products
-  *    derived from this software without specific written permission.
-  * 4. This software, including modifications and/or derivative works of this
-  *    software, must execute solely and exclusively on microcontroller or
-  *    microprocessor devices manufactured by or for STMicroelectronics.
-  * 5. Redistribution and use of this software other than as permitted under
-  *    this license is void and will automatically terminate your rights under
-  *    this license.
-  *
-  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
-  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
-  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
-  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
-  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/Common/accelero.h
--- a/Drivers/BSP/Components/Common/accelero.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/Common/accelero.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/Common/audio.h
--- a/Drivers/BSP/Components/Common/audio.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/Common/audio.h	Tue Sep 24 15:30:09 2019 +0200
@@ -7,29 +7,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/Common/camera.h
--- a/Drivers/BSP/Components/Common/camera.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/Common/camera.h	Tue Sep 24 15:30:09 2019 +0200
@@ -7,29 +7,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/Common/epd.h
--- a/Drivers/BSP/Components/Common/epd.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/Common/epd.h	Tue Sep 24 15:30:09 2019 +0200
@@ -7,29 +7,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/Common/gyro.h
--- a/Drivers/BSP/Components/Common/gyro.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/Common/gyro.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/Common/hsensor.h
--- a/Drivers/BSP/Components/Common/hsensor.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/Common/hsensor.h	Tue Sep 24 15:30:09 2019 +0200
@@ -1,35 +1,19 @@
 /**
   ******************************************************************************
-  * @file    tsensor.h
+  * @file    hsensor.h
   * @author  MCD Application Team
   * @brief   This header file contains the functions prototypes for the
-  *          Temperature Sensor driver. 
+  *          Humidity Sensor driver.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -61,7 +45,7 @@
   * @{
   */ 
 
-/** @defgroup HSENSOR_Driver_structure  Temperature Sensor Driver structure
+/** @defgroup HSENSOR_Driver_structure  Humidity Sensor Driver structure
   * @{
   */
 typedef struct

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/Common/idd.h
--- a/Drivers/BSP/Components/Common/idd.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/Common/idd.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/Common/io.h
--- a/Drivers/BSP/Components/Common/io.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/Common/io.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/Common/lcd.h
--- a/Drivers/BSP/Components/Common/lcd.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/Common/lcd.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */ 

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/Common/magneto.h
--- a/Drivers/BSP/Components/Common/magneto.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/Common/magneto.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/Common/psensor.h
--- a/Drivers/BSP/Components/Common/psensor.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/Common/psensor.h	Tue Sep 24 15:30:09 2019 +0200
@@ -1,35 +1,19 @@
 /**
   ******************************************************************************
-  * @file    tsensor.h
+  * @file    psensor.h
   * @author  MCD Application Team
   * @brief   This header file contains the functions prototypes for the
-  *          Temperature Sensor driver. 
+  *          Pressure Sensor driver.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */
@@ -61,7 +45,7 @@
   * @{
   */ 
 
-/** @defgroup PSENSOR_Driver_structure  Temperature Sensor Driver structure
+/** @defgroup PSENSOR_Driver_structure  Pressure Sensor Driver structure
   * @{
   */
 typedef struct

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/Common/ts.h
--- a/Drivers/BSP/Components/Common/ts.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/Common/ts.h	Tue Sep 24 15:30:09 2019 +0200
@@ -6,29 +6,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/Common/tsensor.h
--- a/Drivers/BSP/Components/Common/tsensor.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/Common/tsensor.h	Tue Sep 24 15:30:09 2019 +0200
@@ -7,29 +7,13 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/hts221/hts221.c
--- a/Drivers/BSP/Components/hts221/hts221.c	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/hts221/hts221.c	Tue Sep 24 15:30:09 2019 +0200
@@ -2,36 +2,18 @@
  ******************************************************************************
  * @file    hts221.c
  * @author  MCD Application Team
- * @version V1.0.0
- * @date    14-February-2017
  * @brief   This file provides a set of functions needed to manage the HTS221
  *          humidity and temperature devices
  ******************************************************************************
  * @attention
  *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
  *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/hts221/hts221.h
--- a/Drivers/BSP/Components/hts221/hts221.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/hts221/hts221.h	Tue Sep 24 15:30:09 2019 +0200
@@ -2,35 +2,17 @@
  ******************************************************************************
  * @file    hts221.h
  * @author  MCD Application Team
- * @version V1.0.0
- * @date    14-February-2017
  * @brief   HTS221 header driver file
  ******************************************************************************
  * @attention
  *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
  *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/lis3mdl/lis3mdl.c
--- a/Drivers/BSP/Components/lis3mdl/lis3mdl.c	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/lis3mdl/lis3mdl.c	Tue Sep 24 15:30:09 2019 +0200
@@ -2,36 +2,18 @@
  ******************************************************************************
  * @file    lis3mdl.c
  * @author  MCD Application Team
- * @version V1.0.0
- * @date    14-February-2017
  * @brief   This file provides a set of functions needed to manage the LIS3MDL
  *          magnetometer devices
  ******************************************************************************
  * @attention
  *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
  *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/lis3mdl/lis3mdl.h
--- a/Drivers/BSP/Components/lis3mdl/lis3mdl.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/lis3mdl/lis3mdl.h	Tue Sep 24 15:30:09 2019 +0200
@@ -2,35 +2,17 @@
  ******************************************************************************
  * @file    lis3mdl.h
  * @author  MCD Application Team
- * @version V1.0.0
- * @date    14-February-2017
  * @brief   LIS3MDL header driver file
  ******************************************************************************
  * @attention
  *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
  *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/lps22hb/lps22hb.c
--- a/Drivers/BSP/Components/lps22hb/lps22hb.c	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/lps22hb/lps22hb.c	Tue Sep 24 15:30:09 2019 +0200
@@ -2,36 +2,18 @@
  ******************************************************************************
  * @file    lps22hb.c
  * @author  MCD Application Team
- * @version V1.0.0
- * @date    14-February-2017
  * @brief   This file provides a set of functions needed to manage the LPS22HB
  *          pressure and temperature devices
  ******************************************************************************
  * @attention
  *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
  *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/lps22hb/lps22hb.h
--- a/Drivers/BSP/Components/lps22hb/lps22hb.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/lps22hb/lps22hb.h	Tue Sep 24 15:30:09 2019 +0200
@@ -2,35 +2,17 @@
  ******************************************************************************
  * @file    lps22hb.h
  * @author  MCD Application Team
- * @version V1.0.0
- * @date    14-February-2017
  * @brief   LPS22HB header driver file
  ******************************************************************************
  * @attention
  *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
  *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/lsm6dsl/lsm6dsl.c
--- a/Drivers/BSP/Components/lsm6dsl/lsm6dsl.c	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/lsm6dsl/lsm6dsl.c	Tue Sep 24 15:30:09 2019 +0200
@@ -2,36 +2,18 @@
  ******************************************************************************
  * @file    lsm6dsl.c
  * @author  MCD Application Team
- * @version V1.0.0
- * @date    14-February-2017
  * @brief   This file provides a set of functions needed to manage the LSM6DSL
  *          accelero and gyro devices
  ******************************************************************************
  * @attention
  *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ * <<h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
  *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/lsm6dsl/lsm6dsl.h
--- a/Drivers/BSP/Components/lsm6dsl/lsm6dsl.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/lsm6dsl/lsm6dsl.h	Tue Sep 24 15:30:09 2019 +0200
@@ -2,35 +2,17 @@
  ******************************************************************************
  * @file    lsm6dsl.h
  * @author  MCD Application Team
- * @version V1.0.0
- * @date    14-February-2017
  * @brief   LSM6DSL header driver file
  ******************************************************************************
  * @attention
  *
- * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.</center></h2>
  *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

diff -r 9dfa42666f03 -r bfe8272ced90 Drivers/BSP/Components/mx25r6435f/mx25r6435f.h
--- a/Drivers/BSP/Components/mx25r6435f/mx25r6435f.h	Fri Jan 19 14:27:51 2018 +0100
+++ b/Drivers/BSP/Components/mx25r6435f/mx25r6435f.h	Tue Sep 24 15:30:09 2019 +0200
@@ -2,35 +2,17 @@
   ******************************************************************************
   * @file    mx25r6435f.h
   * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    17-February-2017
   * @brief   This file contains all the description of the MX25R6435F QSPI memory.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
   *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
   *
   ******************************************************************************
   */