Contains the BSP driver for the B-L475E-IOT01 board.

Dependents:   mbed-os-example-ble-Thermometer DISCO_L475VG_IOT01-Telegram-BOT DISCO_L475VG_IOT01-sche_cheveux DISCO_L475VG_IOT01-QSPI_FLASH_FILE_SYSTEM ... more

https://os.mbed.com/platforms/ST-Discovery-L475E-IOT01A/

Drivers/BSP/Components/Common/accelero.h

Committer:
jeromecoutant
Date:
2019-09-24
Revision:
7:bfe8272ced90
Parent:
6:9dfa42666f03

File content as of revision 7:bfe8272ced90:

/**
  ******************************************************************************
  * @file    accelero.h
  * @author  MCD Application Team
  * @brief   This header file contains the functions prototypes for the Accelerometer driver.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __ACCELERO_H
#define __ACCELERO_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include <stdint.h>

/** @addtogroup BSP
  * @{
  */

/** @addtogroup Components
  * @{
  */
    
/** @addtogroup ACCELERO
  * @{
  */

/** @defgroup ACCELERO_Exported_Types
  * @{
  */ 

/** @defgroup ACCELERO_Driver_structure  Accelerometer Driver structure
  * @{
  */
typedef struct
{  
  void      (*Init)(uint16_t);
  void      (*DeInit)(void); 
  uint8_t   (*ReadID)(void);
  void      (*Reset)(void);
  void      (*LowPower)(uint16_t);
  void      (*ConfigIT)(void);
  void      (*EnableIT)(uint8_t);
  void      (*DisableIT)(uint8_t);
  uint8_t   (*ITStatus)(uint16_t);
  void      (*ClearIT)(void);
  void      (*FilterConfig)(uint8_t);
  void      (*FilterCmd)(uint8_t);
  void      (*GetXYZ)(int16_t *);
}ACCELERO_DrvTypeDef;
/**
  * @}
  */

/** @defgroup ACCELERO_Configuration_structure  Accelerometer Configuration structure
  * @{
  */

/* ACCELERO struct */
typedef struct
{
  uint8_t Power_Mode;                         /* Power-down/Normal Mode */
  uint8_t AccOutput_DataRate;                 /* OUT data rate */
  uint8_t Axes_Enable;                        /* Axes enable */
  uint8_t High_Resolution;                    /* High Resolution enabling/disabling */
  uint8_t BlockData_Update;                   /* Block Data Update */
  uint8_t Endianness;                         /* Endian Data selection */
  uint8_t AccFull_Scale;                      /* Full Scale selection */
  uint8_t Communication_Mode;
}ACCELERO_InitTypeDef;

/* ACCELERO High Pass Filter struct */
typedef struct
{
  uint8_t HighPassFilter_Mode_Selection;      /* Internal filter mode */
  uint8_t HighPassFilter_CutOff_Frequency;    /* High pass filter cut-off frequency */
  uint8_t HighPassFilter_AOI1;                /* HPF_enabling/disabling for AOI function on interrupt 1 */
  uint8_t HighPassFilter_AOI2;                /* HPF_enabling/disabling for AOI function on interrupt 2 */
  uint8_t HighPassFilter_Data_Sel;
  uint8_t HighPassFilter_Stat;
}ACCELERO_FilterConfigTypeDef;

/**
  * @}
  */


/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __ACCELERO_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/