Renesas / Mbed OS mbed-os_Watson-IoT_ZXing_sample

Sample program showing how to connect GR-PEACH into Watson IoT through mbed Connector and Watson's Connector Bridge

Dependencies:   AsciiFont DisplayApp GR-PEACH_video LCD_shield_config LWIPBP3595Interface_STA_for_mbed-os USBDevice

You are viewing an older revision! See the latest version

Homepage

Table of Contents

  1. Overview
  2. Required hardware
  3. Application setup

Overview

This sample program shows how to connect GR-PEACH into Watson IoT through mbed Connector and Watson's Connector Bridge. Note that this program is derived from https://github.com/ARMmbed/mbed-ethernet-sample-techcon2016.

In this program, at first, the barcode data input from camera is decoded on GR-PEACH using ZXing which is an open-source, multi-format 1D/2D barcode image processing library. Then, the decoded string is sent to Watson IoT via mbed Device Connector and Watson's Connector Bridge. At last, the delivered string is confirmed via NodeRED flow.

Required hardware

Application setup

  1. Select the connection type. For details, please refer to the following wiki:
    https://developer.mbed.org/teams/Renesas/code/mbed-os_Watson-IoT_ZXing_sample/wiki/Connection-type.
All wikipages