JapanDisplayInc
Animation demo with MIP8F_SPI_Ver60
Dependencies: mbed MIP8F_SPI_Ver60 MIP8f_FRDM_LineBuffer_sample MIP8f_FRDM_TransferMode_sample
Introduction
Animation Demo. Some Goldfish swin in water, from left to right, from bottom to top. Color and monochrome version
Only for LPM027M128x (400x240) ,JDI DIsplay.
Other information , please refer to https://os.mbed.com/teams/JapanDisplayInc/code/MIP8f_FRDM_sample/
Usage
Copy Setting File and Image to micro SD-CARD. you can NOT use same sample color images of OTHER VERSION SAMPLE.
a) Download the following file corresponding to the target panel, and rename file identifier (.bin -> .zip), and unzip the file on micro SD Card's root directory.
LPM027M128x (400x240) :/media/uploads/JDI_Mbed_Team/goldfish_400x240.bin
b) Insert micro SD-CARD to FRDM-K64F. c) Upload binary file to FRDM-K64F.and push Reset Button.
Other information
refer to Usage on https://os.mbed.com/teams/JapanDisplayInc/code/MIP8f_FRDM_sample/
this Sample Code (.bin)
/media/uploads/JDI_Mbed_Team/mip8f_frdm_animation_sample.k64f.bin
SDFileSystem/FATFileSystem/ChaN/diskio.h
- Committer:
- JDI_Mbed_Team
- Date:
- 2018-11-22
- Revision:
- 21:d1beeb6c4a53
- Parent:
- 0:33fe30a2b785
File content as of revision 21:d1beeb6c4a53:
/*-----------------------------------------------------------------------/
/ Low level disk interface modlue include file (C)ChaN, 2014 /
/-----------------------------------------------------------------------*/
#ifndef _DISKIO_DEFINED
#define _DISKIO_DEFINED
#ifdef __cplusplus
extern "C" {
#endif
#define _USE_WRITE 1 /* 1: Enable disk_write function */
#define _USE_IOCTL 1 /* 1: Enable disk_ioctl fucntion */
#include "integer.h"
/* Status of Disk Functions */
typedef BYTE DSTATUS;
/* Results of Disk Functions */
typedef enum {
RES_OK = 0, /* 0: Successful */
RES_ERROR, /* 1: R/W Error */
RES_WRPRT, /* 2: Write Protected */
RES_NOTRDY, /* 3: Not Ready */
RES_PARERR /* 4: Invalid Parameter */
} DRESULT;
/*---------------------------------------*/
/* Prototypes for disk control functions */
DSTATUS disk_initialize (BYTE pdrv);
DSTATUS disk_status (BYTE pdrv);
DRESULT disk_read (BYTE pdrv, BYTE* buff, DWORD sector, UINT count);
DRESULT disk_write (BYTE pdrv, const BYTE* buff, DWORD sector, UINT count);
DRESULT disk_ioctl (BYTE pdrv, BYTE cmd, void* buff);
/* Disk Status Bits (DSTATUS) */
#define STA_NOINIT 0x01 /* Drive not initialized */
#define STA_NODISK 0x02 /* No medium in the drive */
#define STA_PROTECT 0x04 /* Write protected */
/* Command code for disk_ioctrl fucntion */
/* Generic command (Used by FatFs) */
#define CTRL_SYNC 0 /* Complete pending write process (needed at _FS_READONLY == 0) */
#define GET_SECTOR_COUNT 1 /* Get media size (needed at _USE_MKFS == 1) */
#define GET_SECTOR_SIZE 2 /* Get sector size (needed at _MAX_SS != _MIN_SS) */
#define GET_BLOCK_SIZE 3 /* Get erase block size (needed at _USE_MKFS == 1) */
#define CTRL_TRIM 4 /* Inform device that the data on the block of sectors is no longer used (needed at _USE_TRIM == 1) */
/* Generic command (Not used by FatFs) */
#define CTRL_POWER 5 /* Get/Set power status */
#define CTRL_LOCK 6 /* Lock/Unlock media removal */
#define CTRL_EJECT 7 /* Eject media */
#define CTRL_FORMAT 8 /* Create physical format on the media */
/* MMC/SDC specific ioctl command */
#define MMC_GET_TYPE 10 /* Get card type */
#define MMC_GET_CSD 11 /* Get CSD */
#define MMC_GET_CID 12 /* Get CID */
#define MMC_GET_OCR 13 /* Get OCR */
#define MMC_GET_SDSTAT 14 /* Get SD status */
/* ATA/CF specific ioctl command */
#define ATA_GET_REV 20 /* Get F/W revision */
#define ATA_GET_MODEL 21 /* Get model name */
#define ATA_GET_SN 22 /* Get serial number */
#ifdef __cplusplus
}
#endif
#endif