JapanDisplayInc / Mbed 2 deprecated MIP8f_FRDM_Animation_sample

Animation demo with MIP8F_SPI_Ver60

Dependencies:   mbed MIP8F_SPI_Ver60 MIP8f_FRDM_LineBuffer_sample MIP8f_FRDM_TransferMode_sample

Introduction

Animation Demo. Some Goldfish swin in water, from left to right, from bottom to top. Color and monochrome version

Only for LPM027M128x (400x240) ,JDI DIsplay.

Other information , please refer to https://os.mbed.com/teams/JapanDisplayInc/code/MIP8f_FRDM_sample/

Usage

Copy Setting File and Image to micro SD-CARD. you can NOT use same sample color images of OTHER VERSION SAMPLE.

a) Download the following file corresponding to the target panel, and rename file identifier (.bin -> .zip), and unzip the file on micro SD Card's root directory.

LPM027M128x (400x240) :/media/uploads/JDI_Mbed_Team/goldfish_400x240.bin

b) Insert micro SD-CARD to FRDM-K64F. c) Upload binary file to FRDM-K64F.and push Reset Button.

Other information

refer to Usage on https://os.mbed.com/teams/JapanDisplayInc/code/MIP8f_FRDM_sample/

this Sample Code (.bin)

/media/uploads/JDI_Mbed_Team/mip8f_frdm_animation_sample.k64f.bin

SDFileSystem/FATFileSystem/ChaN/diskio.h

Committer:
JDI_Mbed_Team
Date:
2018-09-04
Revision:
0:33fe30a2b785

File content as of revision 0:33fe30a2b785:

/*-----------------------------------------------------------------------/
/  Low level disk interface modlue include file   (C)ChaN, 2014          /
/-----------------------------------------------------------------------*/

#ifndef _DISKIO_DEFINED
#define _DISKIO_DEFINED

#ifdef __cplusplus
extern "C" {
#endif

#define _USE_WRITE	1	/* 1: Enable disk_write function */
#define _USE_IOCTL	1	/* 1: Enable disk_ioctl fucntion */

#include "integer.h"


/* Status of Disk Functions */
typedef BYTE	DSTATUS;

/* Results of Disk Functions */
typedef enum {
	RES_OK = 0,		/* 0: Successful */
	RES_ERROR,		/* 1: R/W Error */
	RES_WRPRT,		/* 2: Write Protected */
	RES_NOTRDY,		/* 3: Not Ready */
	RES_PARERR		/* 4: Invalid Parameter */
} DRESULT;


/*---------------------------------------*/
/* Prototypes for disk control functions */


DSTATUS disk_initialize (BYTE pdrv);
DSTATUS disk_status (BYTE pdrv);
DRESULT disk_read (BYTE pdrv, BYTE* buff, DWORD sector, UINT count);
DRESULT disk_write (BYTE pdrv, const BYTE* buff, DWORD sector, UINT count);
DRESULT disk_ioctl (BYTE pdrv, BYTE cmd, void* buff);


/* Disk Status Bits (DSTATUS) */

#define STA_NOINIT		0x01	/* Drive not initialized */
#define STA_NODISK		0x02	/* No medium in the drive */
#define STA_PROTECT		0x04	/* Write protected */


/* Command code for disk_ioctrl fucntion */

/* Generic command (Used by FatFs) */
#define CTRL_SYNC			0	/* Complete pending write process (needed at _FS_READONLY == 0) */
#define GET_SECTOR_COUNT	1	/* Get media size (needed at _USE_MKFS == 1) */
#define GET_SECTOR_SIZE		2	/* Get sector size (needed at _MAX_SS != _MIN_SS) */
#define GET_BLOCK_SIZE		3	/* Get erase block size (needed at _USE_MKFS == 1) */
#define CTRL_TRIM			4	/* Inform device that the data on the block of sectors is no longer used (needed at _USE_TRIM == 1) */

/* Generic command (Not used by FatFs) */
#define CTRL_POWER			5	/* Get/Set power status */
#define CTRL_LOCK			6	/* Lock/Unlock media removal */
#define CTRL_EJECT			7	/* Eject media */
#define CTRL_FORMAT			8	/* Create physical format on the media */

/* MMC/SDC specific ioctl command */
#define MMC_GET_TYPE		10	/* Get card type */
#define MMC_GET_CSD			11	/* Get CSD */
#define MMC_GET_CID			12	/* Get CID */
#define MMC_GET_OCR			13	/* Get OCR */
#define MMC_GET_SDSTAT		14	/* Get SD status */

/* ATA/CF specific ioctl command */
#define ATA_GET_REV			20	/* Get F/W revision */
#define ATA_GET_MODEL		21	/* Get model name */
#define ATA_GET_SN			22	/* Get serial number */

#ifdef __cplusplus
}
#endif

#endif