Team mbed is at the ATT Hackathon at CES 2016!!! During the hackathon we will be around physically and online on the community tab to help out. See the Wiki tab below for details on using the hardware we've brought. The Code tab contains example code for all the hardware we've brought. Use the Community tab to ask us questions if you cant find us in person.
Table of Contents
2016 AT&T Developer Summit Hackathon¶
ST is proud to be a part of Team mBed™ at the AT&T Developer Summit Hackathon. Join us at the event in Las Vegas by registering now for your free ticket! And if you are going to be a part of the Hackathon, read up on ST’s microcontrollers beforehand here to increase your chances at the STMicroelectronics prize of $5K.
Detail information on how to get started with the STM32F401 Nucleo is listed below as well as information on hardware necessary to build a connected embedded device.
Please check back occasionally as ST will be updating the content of this page.
Overview : 5 Steps to Create Your Connected Embedded Device
Tutorial #1: Preparing the STM32F401 Nucleo Board for Development with ARM mbed
Tutorial #2: Getting Started with mbed and the STM32F401 Nucleo Board
Tutorial #3: "Hello World!" Creating Console Output
Tutorial #4a: Adding Connectivity: U-Blox Cellular Module
Tutorial #4b: Adding Connectivity: Wiznet W5500 Ethernet Module
Tutorial #5: Getting Started with Seeed Studio Grove Sensors
Tutorial #6: Getting Started with Nucleo MEMs Sensors
Tutorial #7a: Getting Started with AT&T M2X
Tutorial #7b: Example Ethernet to Cloud via M2X
Tutorial #8: Putting it all Together: From STM32F401 Devices to Cloud
Tutorial #9: Getting Started with Nucleo NFC Shield
Tutorial #10: Getting Started with Bluetooth Low Energy Nucleo Shield
ST Nucleo F401RE¶
The STM32 Nucleo board is a low-cost and easy-to-use development platform used to quickly evaluate and start a development with an STM32 microcontroller in LQFP64 package.
- All mbed information for this board can be found here:
mbed ST Nucleo F401RE Platform Page
- A complete description of the features of this board, including schematics is found here:
STM32F401 Nucleo User Manual
- Additional information on the STM32F401 Nucleo board can be found here:
STM32F401 Nucleo Home page
The STM32F401xC/xE family is based on the high-performance ARM Cortex-M4 32-bit RISC core operating at a frequency of up to 84 MHz. Its Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
- Download the datasheet here:
- Download the reference manual here:
STM32F401 Reference Manual
- Addition information, including application notes, programming manual, tools and software can be found here:
STM32F401 Home Page
ST-Link is the USB device interface that allows the STM32 Nucleo to be programmed by mbed.
It is recommended that you pre-install the ST-Link PC driver and update the ST-Link firmware before using your STM32 Nucleo with mbed.
ST-Link/V2 is a software utilities that allows you to connect to the STM32 microcontroller on the Nucleo board. It allows you to read and write the embedded flash contents of the STM32.
STM32 ST-Link Software Utility
STM32 ST-Link Software Documentation
ST has partnered with multiple mbed ready Connectivity module suppliers that are providing STM32 Nucleo compatible Cellular and Ethernet "Shield" boards.
U-Blox Cellular Module
C027 mbed library and Sample Applications
ST Microelectronics BLE BlueNRG Radio Module
BlueNRG library and Sample Applications
ST Microelectroncs NFC/RFID tag Module
NFC library and Sample Applications
ST Sensor Information
MEMS and enivonmental expansion board is compatible with the Arduino UNO R3 connector layout, and is designed around STMicroelectronics’ LSM6DS0 3-axis accelerometer + 3-axis gyroscope, the LIS3MDL 3-axis magnetometer, the HTS221 humidity sensor and the LPS25H pressure sensor.
Grove Sensor Information from Seeed Studio
Use the Grove Shield board to connect to the STM32 Nucleo Arduino connector. This Arduino Shield board provides the base to connect multiple Grove sensor modules to the STM32 Nucleo board
Grove Arduino Shield Board
Grove Temp / Humidity
Grove Digital Light
Grove Analog Light
Grove Air Quality
Grove Digital Compass
Grove Collision Sensor
Grove Water Sensor
Grove Alcohol Sensor
Grove Moisture Sensor
Grove Motion Sensor
Grove UV Sensor
Grove Heart Rate sensor
Grove Color Sensor
Grove GSR Sensor
Grove User Interface
Grove Vibration Motor
Grove LED Bar
Grove 4-Digit Display
Grove Touch Sensor (Multiple)
Grove Touch Sensor (Single)
Grove Chainable LED
AT&T M2X is a fully managed data storage service for internet connected machine-to-machine devices that leverages the power and scale of AT&T's global network.