NXP_Freedom_Developer_Zone -

AT&T Developer Summit Hackathon 2016 » Wiki » NXP_Freedom_Developer_Zone

AT&T Developer Summit Hackathon 2016

Team mbed is at the ATT Hackathon at CES 2016!!! During the hackathon we will be around physically and online on the community tab to help out. See the Wiki tab below for details on using the hardware we've brought. The Code tab contains example code for all the hardware we've brought. Use the Community tab to ask us questions if you cant find us in person.

You are viewing an older revision! See the latest version

NXP_Freedom_Developer_Zone

Cumulate sponsor challenges targeting right application to increase your final price!!

Simply need to combine our NXP Hardware with the Software of other sponsors. For example, you could play to win up to $10k with a project enabling IBM Bluemix, ARM mbed IoT or AT&T M2X services on the Freedom platform...

Our team is going to improve continuously the content of this page, so remember to check it periodically.

NXP Kicker Prize¶

Win $5,000 for Best use of two (2) NXP Freedom development boards and ARM® mbed Technology
NXP Hardware Must include use of the FRDM-K64F MCU board, and then choose from the following:

FRDM-STBC-AGM01 Sensor boards
FRDM-CR20A 2.4GHz Wireless Transceiver board
Both of the above

ARM mbed Software Must leverage ARM mbed development platform/software

/media/uploads/GregC/freedom-combo-2-.jpg

NXP Freedom Boards¶

FRDM-K64F¶

FRDM-K64F MCU board

The Freedom-K64F is an ultra-low-cost development platform for Kinetis MCUs, form-factor compatible with the Arduino R3, embedding a 6-axis MEMs, a RGB LED, 2 user push-buttons, a microSD card slot and targeting connectivity with onboard Ethernet and USB connectors. It integrates the multimode OpenSDA debug adapter offering serial communication, flash programming, and run-control debugging.

The technical information and the mbed program examples (including AT&T M2X) for this board can be found here:
mbed NXP FRDM-K64F Platform Page
Additional information on the Freedom FRDM-K64F MCU board can be found here:
FRDM-K64F Supplier page

FRDM-STBC-AGM01¶

FRDM-STBC-AGM01 Sensor shield

The FRDM-STBC-AGM01 is a development board for the FXAS21002C 3-axis gyroscope and FXOS8700C integrated e-compass. The board enables 9-axis sensing and is supported by Our Sensor Toolbox software, Intelligent Sensing Framework lSF 2.0, and the Sensor Fusion Library for Kinetis MCUs.

The technical information and the mbed program examples (including AT&T M2X) for this board can be found here:
mbed NXP FRDM-STBC-AGM01 Component Page
Additional information on the Freedom FRDM-STBC-AGM01 Sensor board can be found here:
NXP FRDM-STB-AGM01 Supplier page

FRDM-CR20A¶

FRDM-CR20A Wireless shield

The Freedom development board platform supports the MCR20A 2.4GHZ wireless transceiver. The FRDM-CR20A evaluation board is a small, low-power, cost-effective reference design for the MCR20A transceiver in a shield form factor, compatible with existing Freedom development platforms, like FRDM-K64F.

The technical information and the mbed program examples for this board can be found here:
mbed NXP FRDM-CR20A Component Page
Additional information on the Freedom FRDM-CR20A 2.4GHz Wireless board can be found here:
NXP FRDM-CR20A Supplier page

NXP ICs¶

Technical information about the NXP ICs will be available on the supplier website

Get Started Videos¶

AT&T M2X Demo¶

FIRST you should read the AT&T M2X Get Started information and sign up for a FREE Developer license (limit of 10 devices)

The following ARMmbed video provides the basic steps to enter your AT&T M2X account information into the M2X mbed program examples.

Import program M2X_K64F_ACCEL

Demo app to read data from FXOS8700Q accelerometer on FRDM-K64F and send values to AT&T M2X Data Service. For use with DevLab

Import program SensorStream_K64F_AGM01_M2X

Use this "Hello-World" program to stream accelerometer, magnetometer and gyroscope sensor data from FRDM-STBC-AGM01 to the cloud using AT&T M2X Data Services.