InternetDatagramSocket socket implementation. More...

#include <InternetDatagramSocket.h>

Inheritance diagram for InternetDatagramSocket:

Public Member Functions
virtual nsapi_size_or_error_t	sendto (const char host, uint16_t port, const void data, nsapi_size_t size)
	Send data to the specified host and port. More...

virtual nsapi_size_or_error_t	sendto (const SocketAddress &address, const void *data, nsapi_size_t size)
	Send data to the specified address. More...

virtual nsapi_size_or_error_t	recvfrom (SocketAddress address, void data, nsapi_size_t size)
	Receive a datagram and store the source address in address if it's not NULL. More...

virtual nsapi_error_t	connect (const SocketAddress &address)
	Set the remote address for next send() call and filtering of incoming packets. More...

virtual nsapi_size_or_error_t	send (const void *data, nsapi_size_t size)
	Send a raw data to connected remote address. More...

virtual nsapi_size_or_error_t	recv (void *data, nsapi_size_t size)
	Receive data from a socket. More...

virtual Socket *	accept (nsapi_error_t *error=NULL)
	Not implemented for InternetDatagramSocket. More...

virtual nsapi_error_t	listen (int backlog=1)
	Not implemented for InternetDatagramSocket. More...

nsapi_error_t	open (NetworkStack *stack)
	Open a network socket on the network stack of the given network interface. More...

virtual nsapi_error_t	close ()
	defined(DOXYGEN_ONLY) More...

int	join_multicast_group (const SocketAddress &address)
	Subscribe to an IP multicast group. More...

int	leave_multicast_group (const SocketAddress &address)
	Leave an IP multicast group. More...

nsapi_error_t	bind (uint16_t port)
	Bind the socket to a port on which to receive data. More...

nsapi_error_t	bind (const char *address, uint16_t port)
	Bind the socket to a specific address and port on which to receive data. More...

virtual nsapi_error_t	bind (const SocketAddress &address)
	Bind a specific address to a socket. More...

virtual void	set_blocking (bool blocking)
	Set blocking or non-blocking mode of the socket. More...

virtual void	set_timeout (int timeout)
	Set timeout on blocking socket operations. More...

virtual nsapi_error_t	setsockopt (int level, int optname, const void *optval, unsigned optlen)
	Set socket options. More...

virtual nsapi_error_t	getsockopt (int level, int optname, void optval, unsigned optlen)
	Get socket options. More...

virtual void	sigio (mbed::Callback< void()> func)
	Register a callback on state change of the socket. More...

virtual nsapi_error_t	getpeername (SocketAddress *address)
	Get the remote-end peer associated with this socket. More...

void	attach (mbed::Callback< void()> func)
	Register a callback on state change of the socket. More...

template<typename T , typename M >
void	attach (T *obj, M method)
	Register a callback on state change of the socket. More...

Detailed Description

InternetDatagramSocket socket implementation.

Definition at line 30 of file InternetDatagramSocket.h.

Member Function Documentation

virtual Socket* accept ( nsapi_error_t * error = NULL )

virtual

Not implemented for InternetDatagramSocket.

Parameters

error Not used.

Returns: NSAPI_ERROR_UNSUPPORTED

Implements Socket.

void attach ( mbed::Callback< void()> func )

inherited

Register a callback on state change of the socket.

See also: Socket::sigio

Deprecated:: The behavior of Socket::attach differs from other attach functions in Mbed OS and has been known to cause confusion. Replaced by Socket::sigio.

void attach	(	T *	obj,
		M	method
	)

inherited

Register a callback on state change of the socket.

See also: Socket::sigio

Deprecated:: The attach function does not support cv-qualifiers. Replaced by attach(callback(obj, method)).

Definition at line 149 of file InternetSocket.h.

nsapi_error_t bind ( uint16_t port )

inherited

Bind the socket to a port on which to receive data.

Parameters

port	Local port to bind.

Returns: 0 on success, negative error code on failure (

See also: nsapi_types.h).

nsapi_error_t bind	(	const char *	address,
		uint16_t	port
	)

inherited

Bind the socket to a specific address and port on which to receive data.

If the IP address is zeroed, only the port is bound.

Parameters

address	Null-terminated local address to bind.
port	Local port to bind.

Returns: 0 on success, negative error code on failure (

See also: nsapi_types.h).

virtual nsapi_error_t bind ( const SocketAddress & address )

virtualinherited

Bind a specific address to a socket.

Binding a socket specifies the address and port on which to receive data. If the IP address is zeroed, only the port is bound.

Parameters

address Local address to bind.

Returns: NSAPI_ERROR_OK on success, negative error code on failure.

Implements Socket.

virtual nsapi_error_t close ( )

virtualinherited

defined(DOXYGEN_ONLY)

Close any open connection, and deallocate any memory associated with the socket. Called from destructor if socket is not closed.

Returns: 0 on success, negative error code on failure (

See also: nsapi_types.h).

Implements Socket.

virtual nsapi_error_t connect ( const SocketAddress & address )

virtual

Set the remote address for next send() call and filtering of incoming packets.

To reset the address, zero initialized SocketAddress must be in the address parameter.

Parameters

address The SocketAddress of the remote host.

Returns: 0 on success, negative error code on failure.

Implements Socket.

virtual nsapi_error_t getpeername ( SocketAddress * address )

virtualinherited

Get the remote-end peer associated with this socket.

Copy the remote peer address to a SocketAddress structure pointed by address parameter. Socket must be connected to have a peer address associated.

Parameters

address Pointer to SocketAddress structure.

Returns: NSAPI_ERROR_OK on success, negative error code on failure.

Implements Socket.

virtual nsapi_error_t getsockopt	(	int	level,
		int	optname,
		void *	optval,
		unsigned *	optlen
	)

virtualinherited

Get socket options.

getsockopt() allows an application to retrieve stack-specific options from the underlying stack using stack-specific level and option names, or to request generic options using levels from nsapi_socket_level_t.

For unsupported options, NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.

Parameters

level	Stack-specific protocol level or nsapi_socket_level_t.
optname	Level-specific option name.
optval	Destination for option value.
optlen	Length of the option value.

Returns: NSAPI_ERROR_OK on success, negative error code on failure.

Implements Socket.

int join_multicast_group ( const SocketAddress & address )

inherited

Subscribe to an IP multicast group.

Parameters

address Multicast group IP address.

Returns: 0 on success, negative error code on failure (

See also: nsapi_types.h).

int leave_multicast_group ( const SocketAddress & address )

inherited

Leave an IP multicast group.

Parameters

address Multicast group IP address.

Returns: 0 on success, negative error code on failure (

See also: nsapi_types.h).

virtual nsapi_error_t listen ( int backlog = 1 )

virtual

Not implemented for InternetDatagramSocket.

Parameters

backlog Not used.

Returns: NSAPI_ERROR_UNSUPPORTED

Implements Socket.

nsapi_error_t open ( NetworkStack * stack )

inherited

Open a network socket on the network stack of the given network interface.

Note: Not needed if stack is passed to the socket's constructor.

Parameters

stack Network stack as target for socket.

Returns: 0 on success, negative error code on failure (

See also: nsapi_types.h).

virtual nsapi_size_or_error_t recv	(	void *	data,
		nsapi_size_t	size
	)

virtual

Receive data from a socket.

This is equivalent to calling recvfrom(NULL, data, size).

By default, recv blocks until some data is received. If socket is set to nonblocking or times out, NSAPI_ERROR_WOULD_BLOCK can be returned to indicate no data.

Note: recv() is allowed write to data buffer even if error occurs.

Parameters

data	Pointer to buffer for data received from the host.
size	Size of the buffer in bytes.

Returns: Number of received bytes on success, negative error code on failure.

Implements Socket.

virtual nsapi_size_or_error_t recvfrom	(	SocketAddress *	address,
		void *	data,
		nsapi_size_t	size
	)

virtual

Receive a datagram and store the source address in address if it's not NULL.

By default, recvfrom blocks until a datagram is received. If socket is set to nonblocking or times out with no datagram, NSAPI_ERROR_WOULD_BLOCK is returned.

Note: If the datagram is larger than the buffer, the excess data is silently discarded.; If socket is connected, only packets coming from connected peer address are accepted.; recvfrom() is allowed write to address and data buffers even if error occurs.

Parameters

address	Destination for the source address or NULL.
data	Destination buffer for RAW data to be received from the host.
size	Size of the buffer in bytes.

Returns: Number of received bytes on success, negative error code on failure.

Implements Socket.

virtual nsapi_size_or_error_t send	(	const void *	data,
		nsapi_size_t	size
	)

virtual

Send a raw data to connected remote address.

By default, send blocks until all data is sent. If socket is set to nonblocking or times out, a partial amount can be written. NSAPI_ERROR_WOULD_BLOCK is returned if no data was written.

Note: The socket must be connected to a remote host before send() call.

Parameters

data	Buffer of data to send to the host.
size	Size of the buffer in bytes.

Returns: Number of sent bytes on success, negative error code on failure.

Implements Socket.

virtual nsapi_size_or_error_t sendto	(	const char *	host,
		uint16_t	port,
		const void *	data,
		nsapi_size_t	size
	)

virtual

Send data to the specified host and port.

By default, sendto blocks until data is sent. If socket is set to nonblocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned immediately.

Parameters

host	Domain name of the remote host or a dotted notation IP address.
port	Port of the remote host.
data	Buffer of data to send to the host.
size	Size of the buffer in bytes.

Returns: Number of sent bytes on success, negative error code on failure.

virtual nsapi_size_or_error_t sendto	(	const SocketAddress &	address,
		const void *	data,
		nsapi_size_t	size
	)

virtual

Send data to the specified address.

By default, sendto blocks until data is sent. If socket is set to nonblocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned immediately.

Parameters

address	The SocketAddress of the remote host.
data	Buffer of data to send to the host.
size	Size of the buffer in bytes.

Returns: Number of sent bytes on success, negative error code on failure.

Implements Socket.

virtual void set_blocking ( bool blocking )

virtualinherited

Set blocking or non-blocking mode of the socket.

Initially all sockets are in blocking mode. In non-blocking mode blocking operations such as send/recv/accept return NSAPI_ERROR_WOULD_BLOCK if they cannot continue.

set_blocking(false) is equivalent to set_timeout(0) set_blocking(true) is equivalent to set_timeout(-1)

Parameters

blocking true for blocking mode, false for non-blocking mode.

Implements Socket.

virtual void set_timeout ( int timeout )

virtualinherited

Set timeout on blocking socket operations.

Initially all sockets have unbounded timeouts. NSAPI_ERROR_WOULD_BLOCK is returned if a blocking operation takes longer than the specified timeout. A timeout of 0 removes the timeout from the socket. A negative value gives the socket an unbounded timeout.

set_timeout(0) is equivalent to set_blocking(false) set_timeout(-1) is equivalent to set_blocking(true)

Parameters

timeout Timeout in milliseconds

Implements Socket.

virtual nsapi_error_t setsockopt	(	int	level,
		int	optname,
		const void *	optval,
		unsigned	optlen
	)

virtualinherited

Set socket options.

setsockopt() allows an application to pass stack-specific options to the underlying stack using stack-specific level and option names, or to request generic options using levels from nsapi_socket_level_t.

For unsupported options, NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.

Parameters

level	Stack-specific protocol level or nsapi_socket_level_t.
optname	Level-specific option name.
optval	Option value.
optlen	Length of the option value.

Returns: NSAPI_ERROR_OK on success, negative error code on failure.

Implements Socket.

virtual void sigio ( mbed::Callback< void()> func )

virtualinherited

Register a callback on state change of the socket.

The specified callback is called on state changes, such as when the socket can receive/send/accept successfully and when an error occurs. The callback may also be called spuriously without reason.

The callback may be called in an interrupt context and should not perform expensive operations such as receive/send calls.

Note! This is not intended as a replacement for a poll or attach-like asynchronous API, but rather as a building block for constructing such functionality. The exact timing of the registered function is not guaranteed and susceptible to change.

Parameters

func	Function to call on state change.

Implements Socket.

Public Member Functions

Detailed Description

Member Function Documentation

Important Information for this Arm website