cc3000 mbed cookbook¶

The Host Driver library¶

This library defines compatible API with the official mbed socket interface, which enables to use many mbed libraries.

An issue tracker is enabled for the host driver, please fill bug report there.

The Patch Programmer¶

In order to use the cc3000 module with this code, make sure at least V1.11 firmware is loaded.

[Repository '/users/frankvnk/code/CC3000_PatchProgrammer_MKII/' not found]

Demos description¶

There are 3 files which are important:

• The main header file - the configuration file
• The init code file - init routines for specific boards
• The main code file - demo code

NOTE: The main header file contains configuration parameters for connection and the board configuration. Please set it before flashing your board.

Two boards are supported at the moment using MY_BOARD selection:

• Wi-Go
• Wifi DipCortex

#define WIGO           1
#define WIFI_DIPCORTEX 2
#define UNDEFINED      3

#define MY_BOARD WIGO

To select any other board, set UNDEFINED macro for MY_BOARD macro inside the main header file and write your own init routine inside the init code file.

The hello world demo. It only connects to an access point, using DHCP and prints a message if DHCP is completed.

Examples using the cc3000 mbed host driver library:¶

The TCP client/server and the UDP client/server demos can be tested with the scripts which are available at Socket handbook

The websocket demo uses the websocket server available on mbed. Follow this guide Websocket and mbed

Twitter demo uses supertweet service. Please visit http://www.supertweet.net/ to register before importing this program, in case you are not registered there and your twitter has not enabled an access to this service.

Kitchen Sink Demo, a complete demo project, allowing you to exercise your CC3000 module ( Work in progress )

Projects with this module:¶