You are viewing an older revision! See the latest version

cc3000

Table of Contents

  1. mbed cc3000 library
  2. The Host Driver library
  3. The Patch Programmer
  4. Demos description

mbed cc3000 library

Information

The cc3000 library is still under development, please check the revision and update your programs regularly.

The Host Driver library

This library defines compatible API with the official mbed socket interface, which enables to use many mbed libraries.

Import librarycc3000_hostdriver_mbedsocket

cc3000 hostdriver with the mbed socket interface

Last commit 28 Feb 2015 by Martin Kojtal

The Patch Programmer

In order to use the cc3000 module with this code, make sure at least V1.11 firmware is loaded.

[Repository '/users/frankvnk/code/CC3000_PatchProgrammer_MKII/' not found]

Demos description

The hello world demo. It only connects to an acces point, using DHCP and prints a message if DHCP is completed.

Import programcc3000_hello_world_demo

cc3000 hello world demo

Last commit 03 Jun 2014 by Martin Kojtal

There are 3 files which are important:

  • The main header file - the configuration file
  • The init code file - init routine for specific boards
  • The main code file - demo code

NOTE: The main header file contains configuration parameters for connection and the board configuration. Please set it before flashing your board.

Two boards are supported at the moment using MY_BOARD selection:

  • Wi-Go
  • Wifi DipCortex

To select any other board, set UNDEFINED macro for MY_BOARD macro and write your own init routine inside the init code file.

Programs using this library:

  • program1
  • program2
  • program3

Projects with this module:

All wikipages