Diff: main_PCU9669.c

Revision:

14:b2e3797242b6

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main_PCU9669.c	Fri Jul 06 08:31:45 2012 +0000
@@ -0,0 +1,180 @@
+/** A sample code for "mini board PCU9669/PCA9665"
+ *
+ *  @author  Akifumi (Tedd) OKANO, NXP Semiconductors
+ *  @version 1.0
+ *  @date    26-Mar-2012
+ *
+ *  Released under the MIT License: http://mbed.org/license/mit
+ *
+ *  An operation sample of PCU9669/PCA9665 I2C bus controller.
+ *  The mbed accesses the bus controller's parallel port (8/2 bit address and 8 bit data) by bit-banging.
+ *  The bit-banging is poerformed by PortInOut function of mbed library.
+ *
+ *    To make the code porting easier, all codes are partitioned into layers to abstract other parts.
+ *    The mbed specific parts are concentrated in lowest layer: "hardware_abs.*".
+ *    This module may need to be modified for the porting.
+ *
+ *    All other upper layers are writen in standard-C.
+ *
+ *    base code is written from 05-Sep-2011 to 09-Sep-2011.
+ *    And demo code has been build on 11-Sep-2011.
+ *    Debug and code adjustment has been done on 08-Sep-2011.
+ *    Small sanitization for main.cpp. All mbed related codes are moved in to "hardware_abs.*". 13-Oct-2011
+ *    hardware_abs are moved into parallel_bus library folder, 3 LED driver operation sample 13-Feb.-2012
+ *    PCU9669 and PCA9665 codes are packed in a project 14-Feb-2012.
+ *
+ *    Before builidng the code, please edit the file mini_board_PCU9669/config.h
+ *    Un-comment the target name what you want to target.
+ */
+
+/** @note Application layer module of PCU9669
+ *
+ *  This code is made to explain basic PCU9669 operation.
+ *  And also, it demonstrates 3 channels of I2C operation with several slaves on those buses.
+ *
+ *  The ch0 is an Fm+ bus that has a PCA9955 as slave device
+ *  The ch1 and ch2 are UFm buses. Each bus has a PCU9955 as slave devices.
+ */
+
+#include "config.h"
+#include "hardware_abs.h"
+#include "transfer_manager.h"   //  abstracting the access of PCU9669 internal buffer
+#include "PCU9669_access.h"     //  PCU9669 chip access interface
+#include "PCx9955_reg.h"        //  slave specific definitions
+#include "PCA9629_reg.h"
+#include "utility.h"            //  
+//#include "mbed.h"   //  this header is required only when printf() is used.
+
+#if defined( CODE_FOR_PCU9669 ) || defined( CODE_FOR_PCA9663 )
+
+#ifdef  CODE_FOR_PCU9669
+#define     TARGET_CHIP_ID  PCU9669_ID
+#endif
+
+#ifdef  CODE_FOR_PCA9663
+#define     TARGET_CHIP_ID  PCA9663_ID
+#endif
+
+#define RESET_PULSE_WIDTH_US    10  //  Minimum pulse width is 4us for PCU9669
+#define RESET_RECOVERY_US       1000
+
+/**
+ *  register settings for PCx9955
+ */
+
+char  PCx9955_reg_data[] = {
+    0x80,                                       //  Strat register address with AutoIncrement bit
+    0x00, 0x05,                                 //  MODE1, MODE2
+    0xAA, 0xAA, 0xAA, 0xAA,                     //  LEDOUT[3:0]
+    0x80, 0x00,                                 //  GRPPWM, GRPFREQ
+    PWM_INIT,  PWM_INIT,  PWM_INIT,  PWM_INIT,  //  PWM[3:0]
+    PWM_INIT,  PWM_INIT,  PWM_INIT,  PWM_INIT,  //  PWM[7:4]
+    PWM_INIT,  PWM_INIT,  PWM_INIT,  PWM_INIT,  //  PWM[11:8]
+    PWM_INIT,  PWM_INIT,  PWM_INIT,  PWM_INIT,  //  PWM[15:12]
+    IREF_INIT, IREF_INIT, IREF_INIT, IREF_INIT, //  IREF[3:0]
+    IREF_INIT, IREF_INIT, IREF_INIT, IREF_INIT, //  IREF[7:4]
+    IREF_INIT, IREF_INIT, IREF_INIT, IREF_INIT, //  IREF[11:8]
+    IREF_INIT, IREF_INIT, IREF_INIT, IREF_INIT, //  IREF[15:12]
+    0x08                                        //  OFFSET: 1uS offsets
+};
+
+
+char  PCx9955_reg_read_start_address    = 0x80;
+
+char  read_buffer[ 41 ];
+
+transaction     ufm_transactions[]   =   {
+    { PCx9955_ADDR0, PCx9955_reg_data, sizeof( PCx9955_reg_data ) }
+};
+
+transaction     fm_plus_transactions[]   =   {
+    { PCx9955_ADDR0, PCx9955_reg_data, sizeof( PCx9955_reg_data ) },
+    { PCx9955_ADDR0, &PCx9955_reg_read_start_address, 1 },
+    { PCx9955_ADDR0 | 0x01, read_buffer, sizeof( read_buffer ) }
+};
+
+char    read_done   = 0;
+
+void interrupt_handler( void );
+
+int main() {
+    char    clear[ 16 ] = { 0 };
+    int     count       = 0;
+    int     i;
+    int     j;
+
+//    printf( "\r\nPCU9669 simple demo program on mbed\r\n  build : %s (UTC), %s \r\n\r\n", __TIME__, __DATE__ );
+
+    hardware_initialize();          //  initializing bit-banging parallel port
+    reset( RESET_PULSE_WIDTH_US, RESET_RECOVERY_US );  //  assert hardware /RESET sgnal
+
+    if ( start_bus_controller( TARGET_CHIP_ID ) )   //  wait the bus controller ready and check chip ID
+        return 1;
+
+    write_ch_register( CH_FM_PLUS, INTMSK, 0x30 );  //  set bus controller to ignore NAK return from Fm+ slaves
+    install_ISR( &interrupt_handler );              //  interrupt service routine install
+
+    setup_transfer( CH_FM_PLUS, fm_plus_transactions, sizeof( fm_plus_transactions ) / sizeof( transaction ) );
+    setup_transfer( CH_UFM1, ufm_transactions, sizeof( ufm_transactions ) / sizeof( transaction ) );
+    setup_transfer( CH_UFM2, ufm_transactions, sizeof( ufm_transactions ) / sizeof( transaction ) );
+
+    while ( 1 ) {
+        for ( i = 0; i < 16; i++ ) {
+            for ( j = 0; j < 256; j += 4 ) {
+                buffer_overwrite( CH_FM_PLUS, 0, 9 + i, (char *)&j, 1 );
+                buffer_overwrite( CH_UFM1,    0, 9 + i, (char *)&j, 1 );
+                buffer_overwrite( CH_UFM2,    0, 9 + i, (char *)&j, 1 );
+
+                read_done   = 0;
+
+                set_n_of_transaction( CH_FM_PLUS, (sizeof( fm_plus_transactions ) / sizeof( transaction )) - ((count % 256) ? 1 : 0) );
+
+                start( CH_FM_PLUS );
+                start( CH_UFM1 );
+                start( CH_UFM2 );
+
+#if 0
+                if ( read_done ) {
+                    buffer_read( CH_FM_PLUS, 2, 0, read_buffer, sizeof( read_buffer ) );
+                    dump_read_data( read_buffer, sizeof( read_buffer ) );
+                    read_done   = 0;
+                }
+#endif
+                wait_sec( 0.01 );
+                count++;
+            }
+        }
+        buffer_overwrite( CH_FM_PLUS, 0, 9, clear, 16 );
+        buffer_overwrite( CH_UFM1,    0, 9, clear, 16 );
+        buffer_overwrite( CH_UFM2,    0, 9, clear, 16 );
+    }
+}
+
+void interrupt_handler( void ) {
+    char    global_status;
+    char    channel_status;
+
+    global_status  = read_data( CTRLSTATUS );
+
+    if ( global_status & 0x01 ) {  //  ch0
+        channel_status  = read_ch_register( 0, CHSTATUS );
+
+        if ( channel_status & 0x80 )
+            read_done   = 1;
+    }
+    if ( global_status & 0x02 ) {
+        channel_status  = read_ch_register( 1, CHSTATUS );
+    }
+    if ( global_status & 0x04 ) {
+        channel_status  = read_ch_register( 2, CHSTATUS );
+    }
+//    printf( "ISR channel_status 0x%02X\r\n", channel_status );
+}
+
+#endif  //  CODE_FOR_PCU9669
+
+
+
+
+
+