George Roussos
BLE temperature profile using digital DS1820 or analog LM35 sensors
Revision 0:637031152314, committed 2015-03-07
- Comitter:
- gkroussos
- Date:
- Sat Mar 07 16:23:41 2015 +0000
- Commit message:
- Working version 1.0
Changed in this revision
diff -r 000000000000 -r 637031152314 BLE_API_Native/GapAdvertisingData.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/GapAdvertisingData.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,240 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+#include "GapAdvertisingData.h"
+
+/**************************************************************************/
+/*!
+ \brief Creates a new GapAdvertisingData instance
+
+ \par EXAMPLE
+
+ \code
+
+ \endcode
+*/
+/**************************************************************************/
+GapAdvertisingData::GapAdvertisingData(void)
+{
+ memset(_payload, 0, GAP_ADVERTISING_DATA_MAX_PAYLOAD);
+ _payloadLen = 0;
+ _appearance = GENERIC_TAG;
+}
+
+/**************************************************************************/
+/*!
+ Destructor
+*/
+/**************************************************************************/
+GapAdvertisingData::~GapAdvertisingData(void)
+{
+}
+
+/**************************************************************************/
+/*!
+ \brief Adds advertising data based on the specified AD type (see
+ DataType)
+
+ \args[in] advDataType The Advertising 'DataType' to add
+ \args[in] payload Pointer to the payload contents
+ \args[in] len Size of the payload in bytes
+
+ \returns ble_error_t
+
+ \retval BLE_ERROR_NONE
+ Everything executed properly
+
+ \retval BLE_ERROR_BUFFER_OVERFLOW
+ The specified data would cause the advertising buffer
+ to overflow
+
+ \par EXAMPLE
+
+ \code
+
+ \endcode
+*/
+/**************************************************************************/
+ble_error_t GapAdvertisingData::addData(DataType advDataType, uint8_t * payload, uint8_t len)
+{
+ /* ToDo: Check if an AD type already exists and if the existing */
+ /* value is exclusive or not (flags, etc.) */
+
+ /* Make sure we don't exceed the 31 byte payload limit */
+ if (_payloadLen + len + 2 >= GAP_ADVERTISING_DATA_MAX_PAYLOAD)
+ return BLE_ERROR_BUFFER_OVERFLOW;
+
+ /* Field length */
+ memset(&_payload[_payloadLen], len+1, 1);
+ _payloadLen++;
+
+ /* Field ID */
+ memset(&_payload[_payloadLen], (uint8_t)advDataType, 1);
+ _payloadLen++;
+
+ /* Payload */
+ memcpy(&_payload[_payloadLen], payload, len);
+ _payloadLen += len;
+
+ return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ \brief Helper function to add APPEARANCE data to the advertising
+ payload
+
+ \args[in] appearance The APPEARANCE value to add
+
+ \returns ble_error_t
+
+ \retval BLE_ERROR_NONE
+ Everything executed properly
+
+ \retval BLE_ERROR_BUFFER_OVERFLOW
+ The specified data would cause the advertising buffer
+ to overflow
+
+ \par EXAMPLE
+
+ \code
+
+ \endcode
+*/
+/**************************************************************************/
+ble_error_t GapAdvertisingData::addAppearance(Appearance appearance)
+{
+ _appearance = appearance;
+ return addData(GapAdvertisingData::APPEARANCE, (uint8_t*)&appearance, 2);
+}
+
+/**************************************************************************/
+/*!
+ \brief Helper function to add FLAGS data to the advertising
+ payload
+
+ \args[in] flag The FLAGS value to add
+
+ \par LE_LIMITED_DISCOVERABLE
+ The peripheral is discoverable for a limited period of
+ time
+
+ \par LE_GENERAL_DISCOVERABLE
+ The peripheral is permanently discoverable
+
+ \par BREDR_NOT_SUPPORTED
+ This peripheral is a Bluetooth Low Energy only device
+ (no EDR support)
+
+ \returns ble_error_t
+
+ \retval BLE_ERROR_NONE
+ Everything executed properly
+
+ \retval BLE_ERROR_BUFFER_OVERFLOW
+ The specified data would cause the advertising buffer
+ to overflow
+
+ \par EXAMPLE
+
+ \code
+
+ \endcode
+*/
+/**************************************************************************/
+ble_error_t GapAdvertisingData::addFlags(Flags flag)
+{
+ return addData(GapAdvertisingData::FLAGS, (uint8_t*)&flag, 1);
+}
+
+/**************************************************************************/
+/*!
+ \brief Helper function to add TX_POWER_LEVEL data to the
+ advertising payload
+
+ \args[in] flag The TX_POWER_LEVEL value to add
+
+ \returns ble_error_t
+
+ \retval BLE_ERROR_NONE
+ Everything executed properly
+
+ \retval BLE_ERROR_BUFFER_OVERFLOW
+ The specified data would cause the advertising buffer
+ to overflow
+
+ \par EXAMPLE
+
+ \code
+
+ \endcode
+*/
+/**************************************************************************/
+ble_error_t GapAdvertisingData::addTxPower(int8_t txPower)
+{
+ /* ToDo: Basic error checking to make sure txPower is in range */
+ return addData(GapAdvertisingData::TX_POWER_LEVEL, (uint8_t*)&txPower, 1);
+}
+
+/**************************************************************************/
+/*!
+ \brief Clears the payload and resets the payload length counter
+*/
+/**************************************************************************/
+void GapAdvertisingData::clear(void)
+{
+ memset(&_payload, 0, GAP_ADVERTISING_DATA_MAX_PAYLOAD);
+ _payloadLen = 0;
+}
+
+/**************************************************************************/
+/*!
+ \brief Returns a pointer to the the current payload
+
+ \returns A pointer to the payload
+*/
+/**************************************************************************/
+uint8_t * GapAdvertisingData::getPayload(void)
+{
+ return (_payloadLen > 0) ? _payload : NULL;
+}
+
+/**************************************************************************/
+/*!
+ \brief Returns the current payload length (0..31 bytes)
+
+ \returns The payload length in bytes
+*/
+/**************************************************************************/
+uint8_t GapAdvertisingData::getPayloadLen(void)
+{
+ return _payloadLen;
+}
+
+/**************************************************************************/
+/*!
+ \brief Returns the 16-bit appearance value for this device
+
+ \returns The 16-bit appearance value
+*/
+/**************************************************************************/
+uint16_t GapAdvertisingData::getAppearance(void)
+{
+ return (uint16_t)_appearance;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/GapAdvertisingData.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/GapAdvertisingData.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,212 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __GAP_ADVERTISING_DATA_H__
+#define __GAP_ADVERTISING_DATA_H__
+
+#include "blecommon.h"
+
+#define GAP_ADVERTISING_DATA_MAX_PAYLOAD (31)
+
+/**************************************************************************/
+/*!
+ \brief
+ This class provides several helper functions to generate properly
+ formatted GAP Advertising and Scan Response data payloads
+
+ \note
+ See Bluetooth Specification 4.0 (Vol. 3), Part C, Section 11 and 18
+ for further information on Advertising and Scan Response data.
+
+ \par Advertising and Scan Response Payloads
+ Advertising data and Scan Response data are organized around a set of
+ data types called 'AD types' in Bluetooth 4.0 (see the Bluetooth Core
+ Specification v4.0, Vol. 3, Part C, Sections 11 and 18).
+
+ \par
+ Each AD type has it's own standardized 'assigned number', as defined
+ by the Bluetooth SIG:
+ https://www.bluetooth.org/en-us/specification/assigned-numbers/generic-access-profile
+
+ \par
+ For convenience sake, all appropriate AD types have been encapsulated
+ into GapAdvertisingData::DataType.
+
+ \par
+ Before the AD Types and their payload (if any) can be inserted into
+ the Advertising or Scan Response frames, they need to be formatted as
+ follows:
+
+ \li \c Record length (1 byte)
+ \li \c AD Type (1 byte)
+ \li \c AD payload (optional, only present if record length > 1)
+
+ \par
+ This class takes care of properly formatting the payload, performs
+ some basic checks on the payload length, and tries to avoid common
+ errors like adding an exclusive AD field twice in the Advertising
+ or Scan Response payload.
+
+ \par EXAMPLE
+
+ \code
+
+ // ToDo
+
+ \endcode
+*/
+/**************************************************************************/
+class GapAdvertisingData
+{
+ public:
+ /**********************************************************************/
+ /*!
+ \brief
+ A list of Advertising Data types commonly used by peripherals.
+ These AD types are used to describe the capabilities of the
+ peripheral, and get inserted inside the advertising or scan
+ response payloads.
+
+ \par Source
+ \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 11, 18
+ \li \c https://www.bluetooth.org/en-us/specification/assigned-numbers/generic-access-profile
+ */
+ /**********************************************************************/
+ enum DataType
+ {
+ FLAGS = 0x01, /**< \ref Flags */
+ INCOMPLETE_LIST_16BIT_SERVICE_IDS = 0x02, /**< Incomplete list of 16-bit Service IDs */
+ COMPLETE_LIST_16BIT_SERVICE_IDS = 0x03, /**< Complete list of 16-bit Service IDs */
+ INCOMPLETE_LIST_32BIT_SERVICE_IDS = 0x04, /**< Incomplete list of 32-bit Service IDs (not relevant for Bluetooth 4.0) */
+ COMPLETE_LIST_32BIT_SERVICE_IDS = 0x05, /**< Complete list of 32-bit Service IDs (not relevant for Bluetooth 4.0) */
+ INCOMPLETE_LIST_128BIT_SERVICE_IDS = 0x06, /**< Incomplete list of 128-bit Service IDs */
+ COMPLETE_LIST_128BIT_SERVICE_IDS = 0x07, /**< Complete list of 128-bit Service IDs */
+ SHORTENED_LOCAL_NAME = 0x08, /**< Shortened Local Name */
+ COMPLETE_LOCAL_NAME = 0x09, /**< Complete Local Name */
+ TX_POWER_LEVEL = 0x0A, /**< TX Power Level (in dBm) */
+ DEVICE_ID = 0x10, /**< Device ID */
+ SLAVE_CONNECTION_INTERVAL_RANGE = 0x12, /**< Slave Connection Interval Range */
+ SERVICE_DATA = 0x16, /**< Service Data */
+ APPEARANCE = 0x19, /**< \ref Appearance */
+ ADVERTISING_INTERVAL = 0x1A, /**< Advertising Interval */
+ MANUFACTURER_SPECIFIC_DATA = 0xFF /**< Manufacturer Specific Data */
+ };
+
+ /**********************************************************************/
+ /*!
+ \brief
+ A list of values for the FLAGS AD Type
+
+ \note
+ You can use more than one value in the FLAGS AD Type (ex.
+ LE_GENERAL_DISCOVERABLE and BREDR_NOT_SUPPORTED).
+
+ \par Source
+ \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 18.1
+ */
+ /**********************************************************************/
+ enum Flags
+ {
+ LE_LIMITED_DISCOVERABLE = 0x01, /**< Peripheral device is discoverable for a limited period of time */
+ LE_GENERAL_DISCOVERABLE = 0x02, /**< Peripheral device is discoverable at any moment */
+ BREDR_NOT_SUPPORTED = 0x04, /**< Peripheral device is LE only */
+ SIMULTANEOUS_LE_BREDR_C = 0x08, /**< Not relevant - central mode only */
+ SIMULTANEOUS_LE_BREDR_H = 0x10 /**< Not relevant - central mode only */
+ };
+
+ /**********************************************************************/
+ /*!
+ \brief
+ A list of values for the APPEARANCE AD Type, which describes the
+ physical shape or appearance of the device
+
+ \par Source
+ \li \c Bluetooth Core Specification Supplement, Part A, Section 1.12
+ \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 12.2
+ \li \c https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.gap.appearance.xml
+ */
+ /**********************************************************************/
+ enum Appearance
+ {
+ UNKNOWN = 0, /**< Unknown of unspecified appearance type */
+ GENERIC_PHONE = 64, /**< Generic Phone */
+ GENERIC_COMPUTER = 128, /**< Generic Computer */
+ GENERIC_WATCH = 192, /**< Generic Watch */
+ WATCH_SPORTS_WATCH = 193, /**< Sports Watch */
+ GENERIC_CLOCK = 256, /**< Generic Clock */
+ GENERIC_DISPLAY = 320, /**< Generic Display */
+ GENERIC_REMOTE_CONTROL = 384, /**< Generic Remote Control */
+ GENERIC_EYE_GLASSES = 448, /**< Generic Eye Glasses */
+ GENERIC_TAG = 512, /**< Generic Tag */
+ GENERIC_KEYRING = 576, /**< Generic Keyring */
+ GENERIC_MEDIA_PLAYER = 640, /**< Generic Media Player */
+ GENERIC_BARCODE_SCANNER = 704, /**< Generic Barcode Scanner */
+ GENERIC_THERMOMETER = 768, /**< Generic Thermometer */
+ THERMOMETER_EAR = 769, /**< Ear Thermometer */
+ GENERIC_HEART_RATE_SENSOR = 832, /**< Generic Heart Rate Sensor */
+ HEART_RATE_SENSOR_HEART_RATE_BELT = 833, /**< Belt Heart Rate Sensor */
+ GENERIC_BLOOD_PRESSURE = 896, /**< Generic Blood Pressure */
+ BLOOD_PRESSURE_ARM = 897, /**< Arm Blood Pressure */
+ BLOOD_PRESSURE_WRIST = 898, /**< Wrist Blood Pressure */
+ HUMAN_INTERFACE_DEVICE_HID = 960, /**< Human Interface Device (HID) */
+ KEYBOARD = 961, /**< Keyboard */
+ MOUSE = 962, /**< Mouse */
+ JOYSTICK = 963, /**< Joystick */
+ GAMEPAD = 964, /**< Gamepad */
+ DIGITIZER_TABLET = 965, /**< Digitizer Tablet */
+ CARD_READER = 966, /**< Card Read */
+ DIGITAL_PEN = 967, /**< Digital Pen */
+ BARCODE_SCANNER = 968, /**< Barcode Scanner */
+ GENERIC_GLUCOSE_METER = 1024, /**< Generic Glucose Meter */
+ GENERIC_RUNNING_WALKING_SENSOR = 1088, /**< Generic Running/Walking Sensor */
+ RUNNING_WALKING_SENSOR_IN_SHOE = 1089, /**< In Shoe Running/Walking Sensor */
+ RUNNING_WALKING_SENSOR_ON_SHOE = 1090, /**< On Shoe Running/Walking Sensor */
+ RUNNING_WALKING_SENSOR_ON_HIP = 1091, /**< On Hip Running/Walking Sensor */
+ GENERIC_CYCLING = 1152, /**< Generic Cycling */
+ CYCLING_CYCLING_COMPUTER = 1153, /**< Cycling Computer */
+ CYCLING_SPEED_SENSOR = 1154, /**< Cycling Speed Senspr */
+ CYCLING_CADENCE_SENSOR = 1155, /**< Cycling Cadence Sensor */
+ CYCLING_POWER_SENSOR = 1156, /**< Cycling Power Sensor */
+ CYCLING_SPEED_AND_CADENCE_SENSOR = 1157, /**< Cycling Speed and Cadence Sensor */
+ PULSE_OXIMETER_GENERIC = 3136, /**< Generic Pulse Oximeter */
+ PULSE_OXIMETER_FINGERTIP = 3137, /**< Fingertip Pulse Oximeter */
+ PULSE_OXIMETER_WRIST_WORN = 3138, /**< Wrist Worn Pulse Oximeter */
+ OUTDOOR_GENERIC = 5184, /**< Generic Outdoor */
+ OUTDOOR_LOCATION_DISPLAY_DEVICE = 5185, /**< Outdoor Location Display Device */
+ OUTDOOR_LOCATION_AND_NAVIGATION_DISPLAY_DEVICE = 5186, /**< Outdoor Location and Navigation Display Device */
+ OUTDOOR_LOCATION_POD = 5187, /**< Outdoor Location Pod */
+ OUTDOOR_LOCATION_AND_NAVIGATION_POD = 5188 /**< Outdoor Location and Navigation Pod */
+ };
+
+ GapAdvertisingData(void);
+ virtual ~GapAdvertisingData(void);
+
+ ble_error_t addData(DataType, uint8_t *, uint8_t);
+ ble_error_t addAppearance(Appearance appearance = GENERIC_TAG);
+ ble_error_t addFlags(Flags flag = LE_GENERAL_DISCOVERABLE);
+ ble_error_t addTxPower(int8_t txPower);
+ void clear(void);
+ uint8_t * getPayload(void);
+ uint8_t getPayloadLen(void);
+ uint16_t getAppearance(void);
+
+ private:
+ uint8_t _payload[GAP_ADVERTISING_DATA_MAX_PAYLOAD];
+ uint8_t _payloadLen;
+ uint16_t _appearance;
+};
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/GapAdvertisingParams.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/GapAdvertisingParams.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,168 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+#include "blecommon.h"
+#include "GapAdvertisingParams.h"
+
+/**************************************************************************/
+/*!
+ \brief
+ Instantiates a new GapAdvertisingParams instance
+
+ \param[in] advType
+ The GAP advertising mode to use for this device. Valid
+ values are defined in AdvertisingType:
+
+ \par ADV_NON_CONNECTABLE_UNDIRECTED
+ All connections to the peripheral device will be refused.
+
+ \par ADV_CONNECTABLE_DIRECTED
+ Only connections from a pre-defined central device will be
+ accepted.
+
+ \par ADV_CONNECTABLE_UNDIRECTED
+ Any central device can connect to this peripheral.
+
+ \par ADV_SCANNABLE_UNDIRECTED
+ Any central device can connect to this peripheral, and
+ the secondary Scan Response payload will be included or
+ available to central devices.
+
+ \par
+ See Bluetooth Core Specification 4.0 (Vol. 3), Part C,
+ Section 9.3 and Core Specification 4.0 (Vol. 6), Part B,
+ Section 2.3.1 for further information on GAP connection
+ modes
+
+ \param[in] interval
+ Advertising interval between 0x0020 and 0x4000 in 0.625ms
+ units (20ms to 10.24s). If using non-connectable mode
+ (ADV_NON_CONNECTABLE_UNDIRECTED) this min value is
+ 0x00A0 (100ms).
+
+ \par
+ Increasing this value will allow central devices to detect
+ your peripheral faster at the expense of more power being
+ used by the radio due to the higher data transmit rate.
+
+ \par
+ This field must be set to 0 if connectionMode is equal
+ to ADV_CONNECTABLE_DIRECTED
+
+ \par
+ See Bluetooth Core Specification, Vol 3., Part C,
+ Appendix A for suggested advertising intervals.
+
+ \param[in] timeout
+ Advertising timeout between 0x1 and 0x3FFF (1 and 16383)
+ in seconds. Enter 0 to disable the advertising timeout.
+
+ \par EXAMPLE
+
+ \code
+
+ \endcode
+*/
+/**************************************************************************/
+GapAdvertisingParams::GapAdvertisingParams(AdvertisingType advType, uint16_t interval, uint16_t timeout)
+{
+ _advType = advType;
+ _interval = interval;
+ _timeout = timeout;
+
+ /* Interval checks */
+ if (_advType == ADV_CONNECTABLE_DIRECTED)
+ {
+ /* Interval must be 0 in directed connectable mode */
+ _interval = 0;
+ }
+ else if (_advType == ADV_NON_CONNECTABLE_UNDIRECTED)
+ {
+ /* Min interval is slightly larger than in other modes */
+ if (_interval < GAP_ADV_PARAMS_INTERVAL_MIN_NONCON)
+ {
+ _interval = GAP_ADV_PARAMS_INTERVAL_MIN_NONCON;
+ }
+ if (_interval > GAP_ADV_PARAMS_INTERVAL_MAX)
+ {
+ _interval = GAP_ADV_PARAMS_INTERVAL_MAX;
+ }
+ }
+ else
+ {
+ /* Stay within interval limits */
+ if (_interval < GAP_ADV_PARAMS_INTERVAL_MIN)
+ {
+ _interval = GAP_ADV_PARAMS_INTERVAL_MIN;
+ }
+ if (_interval > GAP_ADV_PARAMS_INTERVAL_MAX)
+ {
+ _interval = GAP_ADV_PARAMS_INTERVAL_MAX;
+ }
+ }
+
+ /* Timeout checks */
+ if (timeout)
+ {
+ /* Stay within timeout limits */
+ if (_timeout > GAP_ADV_PARAMS_TIMEOUT_MAX)
+ {
+ _timeout = GAP_ADV_PARAMS_TIMEOUT_MAX;
+ }
+ }
+}
+
+/**************************************************************************/
+/*!
+ Destructor
+*/
+/**************************************************************************/
+GapAdvertisingParams::~GapAdvertisingParams(void)
+{
+}
+
+/**************************************************************************/
+/*!
+ \brief returns the current Advertising Type value
+*/
+/**************************************************************************/
+GapAdvertisingParams::AdvertisingType GapAdvertisingParams::getAdvertisingType(void)
+{
+ return _advType;
+}
+
+/**************************************************************************/
+/*!
+ \brief returns the current Advertising Delay (in units of 0.625ms)
+*/
+/**************************************************************************/
+uint16_t GapAdvertisingParams::getInterval(void)
+{
+ return _interval;
+}
+
+/**************************************************************************/
+/*!
+ \brief returns the current Advertising Timeout (in seconds)
+*/
+/**************************************************************************/
+uint16_t GapAdvertisingParams::getTimeout(void)
+{
+ return _timeout;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/GapAdvertisingParams.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/GapAdvertisingParams.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,89 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+*/
+
+#ifndef __GAP_ADVERTISING_PARAMS_H__
+#define __GAP_ADVERTISING_PARAMS_H__
+
+#include "blecommon.h"
+
+#define GAP_ADV_PARAMS_INTERVAL_MIN (0x0020)
+#define GAP_ADV_PARAMS_INTERVAL_MIN_NONCON (0x00A0)
+#define GAP_ADV_PARAMS_INTERVAL_MAX (0x1000)
+#define GAP_ADV_PARAMS_TIMEOUT_MAX (0x3FFF)
+
+/**************************************************************************/
+/*!
+ \brief
+ This class provides a wrapper for the core advertising parameters,
+ including the advertising type (Connectable Undirected,
+ Non Connectable Undirected, etc.), as well as the advertising and
+ timeout intervals.
+
+ \par
+ See the following for more information on advertising types:
+
+ \li \c Bluetooth Core Specification 4.0 (Vol. 6), Part B, Section 2.3.1
+ \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 9.3
+
+ \par EXAMPLE
+
+ \code
+
+ // ToDo
+
+ \endcode
+*/
+/**************************************************************************/
+class GapAdvertisingParams
+{
+ public:
+ /**************************************************************************/
+ /*!
+ \brief
+ Encapsulates the peripheral advertising modes, which determine how
+ the device appears to other central devices in hearing range
+
+ \par
+ See the following for more information on advertising types:
+
+ \li \c Bluetooth Core Specification 4.0 (Vol. 6), Part B, Section 2.3.1
+ \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 9.3
+ */
+ /**************************************************************************/
+ enum AdvertisingType
+ {
+ ADV_CONNECTABLE_UNDIRECTED, /**< Vol 3, Part C, Section 9.3.4 and Vol 6, Part B, Section 2.3.1.1 */
+ ADV_CONNECTABLE_DIRECTED, /**< Vol 3, Part C, Section 9.3.3 and Vol 6, Part B, Section 2.3.1.2 */
+ ADV_SCANNABLE_UNDIRECTED, /**< Include support for Scan Response payloads, see Vol 6, Part B, Section 2.3.1.4 */
+ ADV_NON_CONNECTABLE_UNDIRECTED /**< Vol 3, Part C, Section 9.3.2 and Vol 6, Part B, Section 2.3.1.3 */
+ };
+
+ GapAdvertisingParams(AdvertisingType advType = GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED,
+ uint16_t interval = GAP_ADV_PARAMS_INTERVAL_MIN_NONCON,
+ uint16_t timeout = 0);
+ virtual ~GapAdvertisingParams(void);
+
+ virtual AdvertisingType getAdvertisingType(void);
+ virtual uint16_t getInterval(void);
+ virtual uint16_t getTimeout(void);
+
+ private:
+ AdvertisingType _advType;
+ uint16_t _interval;
+ uint16_t _timeout;
+};
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/GattCharacteristic.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/GattCharacteristic.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,65 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <stdio.h>
+#include <string.h>
+
+#include "GattCharacteristic.h"
+
+/**************************************************************************/
+/*!
+ @brief Creates a new GattCharacteristic using the specified 16-bit
+ UUID, value length, and properties
+
+ @note The UUID value must be unique in the service and is normally >1
+
+ @param[in] id
+ The 16-bit UUID to use for this characteristic
+ @param[in] minLen
+ The min length in bytes of this characteristic's value
+ @param[in] maxLen
+ The max length in bytes of this characteristic's value
+ @param[in] props
+ The 8-bit bit field containing the characteristic's
+ properties
+
+ @section EXAMPLE
+
+ @code
+
+ // UUID = 0x2A19, Min length 2, Max len = 2, Properties = write
+ GattCharacteristic c = GattCharacteristic( 0x2A19, 2, 2, BLE_GATT_CHAR_PROPERTIES_WRITE );
+
+ @endcode
+*/
+/**************************************************************************/
+GattCharacteristic::GattCharacteristic(uint16_t id, uint16_t minLen, uint16_t maxLen, uint8_t props)
+{
+ uuid = id;
+ memcpy(&properties, &props, 1);
+ lenMin = minLen;
+ lenMax = maxLen;
+// handle = 0;
+}
+
+/**************************************************************************/
+/*!
+ Destructor
+*/
+/**************************************************************************/
+GattCharacteristic::~GattCharacteristic(void)
+{
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/GattCharacteristic.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/GattCharacteristic.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,318 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#ifndef __GATT_CHARACTERISTIC_H__
+#define __GATT_CHARACTERISTIC_H__
+
+#include "blecommon.h"
+#include "UUID.h"
+
+#include "ble_gatts.h"
+/* ToDo: Update to use 16-bit or 128-bit UUIDs! */
+
+/**************************************************************************/
+/*!
+ \brief GATT characteristic
+*/
+/**************************************************************************/
+class GattCharacteristic
+{
+ public:
+ enum
+ {
+ UUID_BATTERY_LEVEL_STATE_CHAR = 0x2A1B,
+ UUID_BATTERY_POWER_STATE_CHAR = 0x2A1A,
+ UUID_REMOVABLE_CHAR = 0x2A3A,
+ UUID_SERVICE_REQUIRED_CHAR = 0x2A3B,
+ UUID_ALERT_CATEGORY_ID_CHAR = 0x2A43,
+ UUID_ALERT_CATEGORY_ID_BIT_MASK_CHAR = 0x2A42,
+ UUID_ALERT_LEVEL_CHAR = 0x2A06,
+ UUID_ALERT_NOTIFICATION_CONTROL_POINT_CHAR = 0x2A44,
+ UUID_ALERT_STATUS_CHAR = 0x2A3F,
+ UUID_BATTERY_LEVEL_CHAR = 0x2A19,
+ UUID_BLOOD_PRESSURE_FEATURE_CHAR = 0x2A49,
+ UUID_BLOOD_PRESSURE_MEASUREMENT_CHAR = 0x2A35,
+ UUID_BODY_SENSOR_LOCATION_CHAR = 0x2A38,
+ UUID_BOOT_KEYBOARD_INPUT_REPORT_CHAR = 0x2A22,
+ UUID_BOOT_KEYBOARD_OUTPUT_REPORT_CHAR = 0x2A32,
+ UUID_BOOT_MOUSE_INPUT_REPORT_CHAR = 0x2A33,
+ UUID_CURRENT_TIME_CHAR = 0x2A2B,
+ UUID_DATE_TIME_CHAR = 0x2A08,
+ UUID_DAY_DATE_TIME_CHAR = 0x2A0A,
+ UUID_DAY_OF_WEEK_CHAR = 0x2A09,
+ UUID_DST_OFFSET_CHAR = 0x2A0D,
+ UUID_EXACT_TIME_256_CHAR = 0x2A0C,
+ UUID_FIRMWARE_REVISION_STRING_CHAR = 0x2A26,
+ UUID_GLUCOSE_FEATURE_CHAR = 0x2A51,
+ UUID_GLUCOSE_MEASUREMENT_CHAR = 0x2A18,
+ UUID_GLUCOSE_MEASUREMENT_CONTEXT_CHAR = 0x2A34,
+ UUID_HARDWARE_REVISION_STRING_CHAR = 0x2A27,
+ UUID_HEART_RATE_CONTROL_POINT_CHAR = 0x2A39,
+ UUID_HEART_RATE_MEASUREMENT_CHAR = 0x2A37,
+ UUID_HID_CONTROL_POINT_CHAR = 0x2A4C,
+ UUID_HID_INFORMATION_CHAR = 0x2A4A,
+ UUID_IEEE_REGULATORY_CERTIFICATION_DATA_LIST_CHAR = 0x2A2A,
+ UUID_INTERMEDIATE_CUFF_PRESSURE_CHAR = 0x2A36,
+ UUID_INTERMEDIATE_TEMPERATURE_CHAR = 0x2A1E,
+ UUID_LOCAL_TIME_INFORMATION_CHAR = 0x2A0F,
+ UUID_MANUFACTURER_NAME_STRING_CHAR = 0x2A29,
+ UUID_MEASUREMENT_INTERVAL_CHAR = 0x2A21,
+ UUID_MODEL_NUMBER_STRING_CHAR = 0x2A24,
+ UUID_UNREAD_ALERT_CHAR = 0x2A45,
+ UUID_NEW_ALERT_CHAR = 0x2A46,
+ UUID_PNP_ID_CHAR = 0x2A50,
+ UUID_PROTOCOL_MODE_CHAR = 0x2A4E,
+ UUID_RECORD_ACCESS_CONTROL_POINT_CHAR = 0x2A52,
+ UUID_REFERENCE_TIME_INFORMATION_CHAR = 0x2A14,
+ UUID_REPORT_CHAR = 0x2A4D,
+ UUID_REPORT_MAP_CHAR = 0x2A4B,
+ UUID_RINGER_CONTROL_POINT_CHAR = 0x2A40,
+ UUID_RINGER_SETTING_CHAR = 0x2A41,
+ UUID_SCAN_INTERVAL_WINDOW_CHAR = 0x2A4F,
+ UUID_SCAN_REFRESH_CHAR = 0x2A31,
+ UUID_SERIAL_NUMBER_STRING_CHAR = 0x2A25,
+ UUID_SOFTWARE_REVISION_STRING_CHAR = 0x2A28,
+ UUID_SUPPORTED_NEW_ALERT_CATEGORY_CHAR = 0x2A47,
+ UUID_SUPPORTED_UNREAD_ALERT_CATEGORY_CHAR = 0x2A48,
+ UUID_SYSTEM_ID_CHAR = 0x2A23,
+ UUID_TEMPERATURE_MEASUREMENT_CHAR = 0x2A1C,
+ UUID_TEMPERATURE_TYPE_CHAR = 0x2A1D,
+ UUID_TIME_ACCURACY_CHAR = 0x2A12,
+ UUID_TIME_SOURCE_CHAR = 0x2A13,
+ UUID_TIME_UPDATE_CONTROL_POINT_CHAR = 0x2A16,
+ UUID_TIME_UPDATE_STATE_CHAR = 0x2A17,
+ UUID_TIME_WITH_DST_CHAR = 0x2A11,
+ UUID_TIME_ZONE_CHAR = 0x2A0E,
+ UUID_TX_POWER_LEVEL_CHAR = 0x2A07,
+ UUID_CSC_FEATURE_CHAR = 0x2A5C,
+ UUID_CSC_MEASUREMENT_CHAR = 0x2A5B,
+ UUID_RSC_FEATURE_CHAR = 0x2A54,
+ UUID_RSC_MEASUREMENT_CHAR = 0x2A53,
+ };
+
+ /**************************************************************************/
+ /*!
+ \brief Standard GATT characteristic presentation format unit types.
+ These unit types are used to decribe what the raw numeric
+ data in a characteristic actually represents.
+
+ \note See https://developer.bluetooth.org/gatt/units/Pages/default.aspx
+ */
+ /**************************************************************************/
+ typedef enum ble_gatt_unit_e
+ {
+ BLE_GATT_UNIT_NONE = 0x2700, /**< No specified unit type */
+ BLE_GATT_UNIT_LENGTH_METRE = 0x2701, /**< Length, Metre */
+ BLE_GATT_UNIT_MASS_KILOGRAM = 0x2702, /**< Mass, Kilogram */
+ BLE_GATT_UNIT_TIME_SECOND = 0x2703, /**< Time, Second */
+ BLE_GATT_UNIT_ELECTRIC_CURRENT_AMPERE = 0x2704, /**< Electric Current, Ampere */
+ BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_KELVIN = 0x2705, /**< Thermodynamic Temperature, Kelvin */
+ BLE_GATT_UNIT_AMOUNT_OF_SUBSTANCE_MOLE = 0x2706, /**< Amount of Substance, Mole */
+ BLE_GATT_UNIT_LUMINOUS_INTENSITY_CANDELA = 0x2707, /**< Luminous Intensity, Candela */
+ BLE_GATT_UNIT_AREA_SQUARE_METRES = 0x2710, /**< Area, Square Metres */
+ BLE_GATT_UNIT_VOLUME_CUBIC_METRES = 0x2711, /**< Volume, Cubic Metres*/
+ BLE_GATT_UNIT_VELOCITY_METRES_PER_SECOND = 0x2712, /**< Velocity, Metres per Second*/
+ BLE_GATT_UNIT_ACCELERATION_METRES_PER_SECOND_SQUARED = 0x2713, /**< Acceleration, Metres per Second Squared */
+ BLE_GATT_UNIT_WAVENUMBER_RECIPROCAL_METRE = 0x2714, /**< Wave Number Reciprocal, Metre */
+ BLE_GATT_UNIT_DENSITY_KILOGRAM_PER_CUBIC_METRE = 0x2715, /**< Density, Kilogram per Cubic Metre */
+ BLE_GATT_UNIT_SURFACE_DENSITY_KILOGRAM_PER_SQUARE_METRE = 0x2716, /**< */
+ BLE_GATT_UNIT_SPECIFIC_VOLUME_CUBIC_METRE_PER_KILOGRAM = 0x2717, /**< */
+ BLE_GATT_UNIT_CURRENT_DENSITY_AMPERE_PER_SQUARE_METRE = 0x2718, /**< */
+ BLE_GATT_UNIT_MAGNETIC_FIELD_STRENGTH_AMPERE_PER_METRE = 0x2719, /**< Magnetic Field Strength, Ampere per Metre */
+ BLE_GATT_UNIT_AMOUNT_CONCENTRATION_MOLE_PER_CUBIC_METRE = 0x271A, /**< */
+ BLE_GATT_UNIT_MASS_CONCENTRATION_KILOGRAM_PER_CUBIC_METRE = 0x271B, /**< */
+ BLE_GATT_UNIT_LUMINANCE_CANDELA_PER_SQUARE_METRE = 0x271C, /**< */
+ BLE_GATT_UNIT_REFRACTIVE_INDEX = 0x271D, /**< */
+ BLE_GATT_UNIT_RELATIVE_PERMEABILITY = 0x271E, /**< */
+ BLE_GATT_UNIT_PLANE_ANGLE_RADIAN = 0x2720, /**< */
+ BLE_GATT_UNIT_SOLID_ANGLE_STERADIAN = 0x2721, /**< */
+ BLE_GATT_UNIT_FREQUENCY_HERTZ = 0x2722, /**< Frequency, Hertz */
+ BLE_GATT_UNIT_FORCE_NEWTON = 0x2723, /**< Force, Newton */
+ BLE_GATT_UNIT_PRESSURE_PASCAL = 0x2724, /**< Pressure, Pascal */
+ BLE_GATT_UNIT_ENERGY_JOULE = 0x2725, /**< Energy, Joule */
+ BLE_GATT_UNIT_POWER_WATT = 0x2726, /**< Power, Watt */
+ BLE_GATT_UNIT_ELECTRIC_CHARGE_COULOMB = 0x2727, /**< Electrical Charge, Coulomb */
+ BLE_GATT_UNIT_ELECTRIC_POTENTIAL_DIFFERENCE_VOLT = 0x2728, /**< Electrical Potential Difference, Voltage */
+ BLE_GATT_UNIT_CAPACITANCE_FARAD = 0x2729, /**< */
+ BLE_GATT_UNIT_ELECTRIC_RESISTANCE_OHM = 0x272A, /**< */
+ BLE_GATT_UNIT_ELECTRIC_CONDUCTANCE_SIEMENS = 0x272B, /**< */
+ BLE_GATT_UNIT_MAGNETIC_FLEX_WEBER = 0x272C, /**< */
+ BLE_GATT_UNIT_MAGNETIC_FLEX_DENSITY_TESLA = 0x272D, /**< */
+ BLE_GATT_UNIT_INDUCTANCE_HENRY = 0x272E, /**< */
+ BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_DEGREE_CELSIUS = 0x272F, /**< */
+ BLE_GATT_UNIT_LUMINOUS_FLUX_LUMEN = 0x2730, /**< */
+ BLE_GATT_UNIT_ILLUMINANCE_LUX = 0x2731, /**< */
+ BLE_GATT_UNIT_ACTIVITY_REFERRED_TO_A_RADIONUCLIDE_BECQUEREL = 0x2732, /**< */
+ BLE_GATT_UNIT_ABSORBED_DOSE_GRAY = 0x2733, /**< */
+ BLE_GATT_UNIT_DOSE_EQUIVALENT_SIEVERT = 0x2734, /**< */
+ BLE_GATT_UNIT_CATALYTIC_ACTIVITY_KATAL = 0x2735, /**< */
+ BLE_GATT_UNIT_DYNAMIC_VISCOSITY_PASCAL_SECOND = 0x2740, /**< */
+ BLE_GATT_UNIT_MOMENT_OF_FORCE_NEWTON_METRE = 0x2741, /**< */
+ BLE_GATT_UNIT_SURFACE_TENSION_NEWTON_PER_METRE = 0x2742, /**< */
+ BLE_GATT_UNIT_ANGULAR_VELOCITY_RADIAN_PER_SECOND = 0x2743, /**< */
+ BLE_GATT_UNIT_ANGULAR_ACCELERATION_RADIAN_PER_SECOND_SQUARED = 0x2744, /**< */
+ BLE_GATT_UNIT_HEAT_FLUX_DENSITY_WATT_PER_SQUARE_METRE = 0x2745, /**< */
+ BLE_GATT_UNIT_HEAT_CAPACITY_JOULE_PER_KELVIN = 0x2746, /**< */
+ BLE_GATT_UNIT_SPECIFIC_HEAT_CAPACITY_JOULE_PER_KILOGRAM_KELVIN = 0x2747, /**< */
+ BLE_GATT_UNIT_SPECIFIC_ENERGY_JOULE_PER_KILOGRAM = 0x2748, /**< */
+ BLE_GATT_UNIT_THERMAL_CONDUCTIVITY_WATT_PER_METRE_KELVIN = 0x2749, /**< */
+ BLE_GATT_UNIT_ENERGY_DENSITY_JOULE_PER_CUBIC_METRE = 0x274A, /**< */
+ BLE_GATT_UNIT_ELECTRIC_FIELD_STRENGTH_VOLT_PER_METRE = 0x274B, /**< */
+ BLE_GATT_UNIT_ELECTRIC_CHARGE_DENSITY_COULOMB_PER_CUBIC_METRE = 0x274C, /**< */
+ BLE_GATT_UNIT_SURFACE_CHARGE_DENSITY_COULOMB_PER_SQUARE_METRE = 0x274D, /**< */
+ BLE_GATT_UNIT_ELECTRIC_FLUX_DENSITY_COULOMB_PER_SQUARE_METRE = 0x274E, /**< */
+ BLE_GATT_UNIT_PERMITTIVITY_FARAD_PER_METRE = 0x274F, /**< */
+ BLE_GATT_UNIT_PERMEABILITY_HENRY_PER_METRE = 0x2750, /**< */
+ BLE_GATT_UNIT_MOLAR_ENERGY_JOULE_PER_MOLE = 0x2751, /**< */
+ BLE_GATT_UNIT_MOLAR_ENTROPY_JOULE_PER_MOLE_KELVIN = 0x2752, /**< */
+ BLE_GATT_UNIT_EXPOSURE_COULOMB_PER_KILOGRAM = 0x2753, /**< */
+ BLE_GATT_UNIT_ABSORBED_DOSE_RATE_GRAY_PER_SECOND = 0x2754, /**< */
+ BLE_GATT_UNIT_RADIANT_INTENSITY_WATT_PER_STERADIAN = 0x2755, /**< */
+ BLE_GATT_UNIT_RADIANCE_WATT_PER_SQUARE_METRE_STERADIAN = 0x2756, /**< */
+ BLE_GATT_UNIT_CATALYTIC_ACTIVITY_CONCENTRATION_KATAL_PER_CUBIC_METRE = 0x2757, /**< */
+ BLE_GATT_UNIT_TIME_MINUTE = 0x2760, /**< Time, Minute */
+ BLE_GATT_UNIT_TIME_HOUR = 0x2761, /**< Time, Hour */
+ BLE_GATT_UNIT_TIME_DAY = 0x2762, /**< Time, Day */
+ BLE_GATT_UNIT_PLANE_ANGLE_DEGREE = 0x2763, /**< */
+ BLE_GATT_UNIT_PLANE_ANGLE_MINUTE = 0x2764, /**< */
+ BLE_GATT_UNIT_PLANE_ANGLE_SECOND = 0x2765, /**< */
+ BLE_GATT_UNIT_AREA_HECTARE = 0x2766, /**< */
+ BLE_GATT_UNIT_VOLUME_LITRE = 0x2767, /**< */
+ BLE_GATT_UNIT_MASS_TONNE = 0x2768, /**< */
+ BLE_GATT_UNIT_PRESSURE_BAR = 0x2780, /**< Pressure, Bar */
+ BLE_GATT_UNIT_PRESSURE_MILLIMETRE_OF_MERCURY = 0x2781, /**< Pressure, Millimetre of Mercury */
+ BLE_GATT_UNIT_LENGTH_ANGSTROM = 0x2782, /**< */
+ BLE_GATT_UNIT_LENGTH_NAUTICAL_MILE = 0x2783, /**< */
+ BLE_GATT_UNIT_AREA_BARN = 0x2784, /**< */
+ BLE_GATT_UNIT_VELOCITY_KNOT = 0x2785, /**< */
+ BLE_GATT_UNIT_LOGARITHMIC_RADIO_QUANTITY_NEPER = 0x2786, /**< */
+ BLE_GATT_UNIT_LOGARITHMIC_RADIO_QUANTITY_BEL = 0x2787, /**< */
+ BLE_GATT_UNIT_LENGTH_YARD = 0x27A0, /**< Length, Yard */
+ BLE_GATT_UNIT_LENGTH_PARSEC = 0x27A1, /**< Length, Parsec */
+ BLE_GATT_UNIT_LENGTH_INCH = 0x27A2, /**< Length, Inch */
+ BLE_GATT_UNIT_LENGTH_FOOT = 0x27A3, /**< Length, Foot */
+ BLE_GATT_UNIT_LENGTH_MILE = 0x27A4, /**< Length, Mile */
+ BLE_GATT_UNIT_PRESSURE_POUND_FORCE_PER_SQUARE_INCH = 0x27A5, /**< */
+ BLE_GATT_UNIT_VELOCITY_KILOMETRE_PER_HOUR = 0x27A6, /**< Velocity, Kilometre per Hour */
+ BLE_GATT_UNIT_VELOCITY_MILE_PER_HOUR = 0x27A7, /**< Velocity, Mile per Hour */
+ BLE_GATT_UNIT_ANGULAR_VELOCITY_REVOLUTION_PER_MINUTE = 0x27A8, /**< Angular Velocity, Revolution per Minute */
+ BLE_GATT_UNIT_ENERGY_GRAM_CALORIE = 0x27A9, /**< Energy, Gram Calorie */
+ BLE_GATT_UNIT_ENERGY_KILOGRAM_CALORIE = 0x27AA, /**< Energy, Kilogram Calorie */
+ BLE_GATT_UNIT_ENERGY_KILOWATT_HOUR = 0x27AB, /**< Energy, Killowatt Hour */
+ BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_DEGREE_FAHRENHEIT = 0x27AC, /**< */
+ BLE_GATT_UNIT_PERCENTAGE = 0x27AD, /**< Percentage */
+ BLE_GATT_UNIT_PER_MILLE = 0x27AE, /**< */
+ BLE_GATT_UNIT_PERIOD_BEATS_PER_MINUTE = 0x27AF, /**< */
+ BLE_GATT_UNIT_ELECTRIC_CHARGE_AMPERE_HOURS = 0x27B0, /**< */
+ BLE_GATT_UNIT_MASS_DENSITY_MILLIGRAM_PER_DECILITRE = 0x27B1, /**< */
+ BLE_GATT_UNIT_MASS_DENSITY_MILLIMOLE_PER_LITRE = 0x27B2, /**< */
+ BLE_GATT_UNIT_TIME_YEAR = 0x27B3, /**< Time, Year */
+ BLE_GATT_UNIT_TIME_MONTH = 0x27B4, /**< Time, Month */
+ BLE_GATT_UNIT_CONCENTRATION_COUNT_PER_CUBIC_METRE = 0x27B5, /**< */
+ BLE_GATT_UNIT_IRRADIANCE_WATT_PER_SQUARE_METRE = 0x27B6 /**< */
+ } ble_gatt_unit_t;
+
+ /**************************************************************************/
+ /*!
+ \brief Standard GATT number types
+
+ \note See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.3.5.2
+ \note See http://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml
+ */
+ /**************************************************************************/
+ typedef enum ble_gatt_format_e
+ {
+ BLE_GATT_FORMAT_RFU = 0x00, /**< Reserved For Future Use. */
+ BLE_GATT_FORMAT_BOOLEAN = 0x01, /**< Boolean. */
+ BLE_GATT_FORMAT_2BIT = 0x02, /**< Unsigned 2-bit integer. */
+ BLE_GATT_FORMAT_NIBBLE = 0x03, /**< Unsigned 4-bit integer. */
+ BLE_GATT_FORMAT_UINT8 = 0x04, /**< Unsigned 8-bit integer. */
+ BLE_GATT_FORMAT_UINT12 = 0x05, /**< Unsigned 12-bit integer. */
+ BLE_GATT_FORMAT_UINT16 = 0x06, /**< Unsigned 16-bit integer. */
+ BLE_GATT_FORMAT_UINT24 = 0x07, /**< Unsigned 24-bit integer. */
+ BLE_GATT_FORMAT_UINT32 = 0x08, /**< Unsigned 32-bit integer. */
+ BLE_GATT_FORMAT_UINT48 = 0x09, /**< Unsigned 48-bit integer. */
+ BLE_GATT_FORMAT_UINT64 = 0x0A, /**< Unsigned 64-bit integer. */
+ BLE_GATT_FORMAT_UINT128 = 0x0B, /**< Unsigned 128-bit integer. */
+ BLE_GATT_FORMAT_SINT8 = 0x0C, /**< Signed 2-bit integer. */
+ BLE_GATT_FORMAT_SINT12 = 0x0D, /**< Signed 12-bit integer. */
+ BLE_GATT_FORMAT_SINT16 = 0x0E, /**< Signed 16-bit integer. */
+ BLE_GATT_FORMAT_SINT24 = 0x0F, /**< Signed 24-bit integer. */
+ BLE_GATT_FORMAT_SINT32 = 0x10, /**< Signed 32-bit integer. */
+ BLE_GATT_FORMAT_SINT48 = 0x11, /**< Signed 48-bit integer. */
+ BLE_GATT_FORMAT_SINT64 = 0x12, /**< Signed 64-bit integer. */
+ BLE_GATT_FORMAT_SINT128 = 0x13, /**< Signed 128-bit integer. */
+ BLE_GATT_FORMAT_FLOAT32 = 0x14, /**< IEEE-754 32-bit floating point. */
+ BLE_GATT_FORMAT_FLOAT64 = 0x15, /**< IEEE-754 64-bit floating point. */
+ BLE_GATT_FORMAT_SFLOAT = 0x16, /**< IEEE-11073 16-bit SFLOAT. */
+ BLE_GATT_FORMAT_FLOAT = 0x17, /**< IEEE-11073 32-bit FLOAT. */
+ BLE_GATT_FORMAT_DUINT16 = 0x18, /**< IEEE-20601 format. */
+ BLE_GATT_FORMAT_UTF8S = 0x19, /**< UTF-8 string. */
+ BLE_GATT_FORMAT_UTF16S = 0x1A, /**< UTF-16 string. */
+ BLE_GATT_FORMAT_STRUCT = 0x1B /**< Opaque Structure. */
+ } ble_gatt_format_t;
+
+ /**************************************************************************/
+ /*!
+ \brief Standard GATT characteritic properties
+
+ \note See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.1.1
+ and Section 3.3.3.1 for Extended Properties
+ */
+ /**************************************************************************/
+ typedef enum ble_gatt_char_properties_e
+ {
+ BLE_GATT_CHAR_PROPERTIES_BROADCAST = 0x01, /**< Permits broadcasts of the Characteristic Value using Server Characteristic Configuration Descriptor. */
+ BLE_GATT_CHAR_PROPERTIES_READ = 0x02, /**< Permits reads of the Characteristic Value. */
+ BLE_GATT_CHAR_PROPERTIES_WRITE_WITHOUT_RESPONSE = 0x04, /**< Permits writes of the Characteristic Value without response. */
+ BLE_GATT_CHAR_PROPERTIES_WRITE = 0x08, /**< Permits writes of the Characteristic Value with response. */
+ BLE_GATT_CHAR_PROPERTIES_NOTIFY = 0x10, /**< Permits notifications of a Characteristic Value without acknowledgement. */
+ BLE_GATT_CHAR_PROPERTIES_INDICATE = 0x20, /**< Permits indications of a Characteristic Value with acknowledgement. */
+ BLE_GATT_CHAR_PROPERTIES_AUTHENTICATED_SIGNED_WRITES = 0x40, /**< Permits signed writes to the Characteristic Value. */
+ BLE_GATT_CHAR_PROPERTIES_EXTENDED_PROPERTIES = 0x80 /**< Additional characteristic properties are defined in the Characteristic Extended Properties Descriptor */
+ } ble_gatt_char_properties_t;
+
+ /**************************************************************************/
+ /*!
+ \brief GATT presentation format wrapper
+
+ \note See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.3.5
+ \note See https://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml
+ */
+ /**************************************************************************/
+ typedef struct PresentationFormat
+ {
+ uint8_t gatt_format; /**< Format of the value, see @ref ble_gatt_format_t. */
+ int8_t exponent; /**< Exponent for integer data types. Ex. if Exponent = -3 and the char value is 3892, the actual value is 3.892 */
+ uint16_t gatt_unit; /**< UUID from Bluetooth Assigned Numbers, see @ref ble_gatt_unit_t. */
+ uint8_t gatt_namespace; /**< Namespace from Bluetooth Assigned Numbers, normally '1', see @ref BLE_GATT_CPF_NAMESPACES. */
+ uint16_t gatt_nsdesc; /**< Namespace description from Bluetooth Assigned Numbers, normally '0', see @ref BLE_GATT_CPF_NAMESPACES. */
+ } presentation_format_t;
+
+ GattCharacteristic(uint16_t uuid=0, uint16_t minLen=1, uint16_t maxLen=1, uint8_t properties=0);
+ virtual ~GattCharacteristic(void);
+
+ uint16_t uuid; /* Characteristic UUID */
+ uint16_t lenMin; /* Minimum length of the value */
+ uint16_t lenMax; /* Maximum length of the value */
+ uint16_t handle;
+ uint8_t properties;
+
+ private:
+};
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/GattService.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/GattService.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,111 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#include <stdio.h>
+#include <string.h>
+
+#include "GattService.h"
+
+/**************************************************************************/
+/*!
+ @brief Creates a new GattService using the specified 128-bit UUID
+
+ @note The UUID value must be unique on the device
+
+ @param[in] uuid
+ The 16 byte (128-bit) UUID to use for this characteristic
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+GattService::GattService(uint8_t base_uuid[16])
+{
+ primaryServiceID.update(base_uuid);
+ characteristicCount = 0;
+ handle = 0;
+}
+
+/**************************************************************************/
+/*!
+ @brief Creates a new GattService using the specified 16-bit BLE UUID
+
+ @param[in] ble_uuid
+ The standardised 16-bit (2 byte) BLE UUID to use for this
+ characteristic
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+GattService::GattService(uint16_t ble_uuid)
+{
+ primaryServiceID.update( ble_uuid );
+ characteristicCount = 0;
+ handle = 0;
+}
+
+/**************************************************************************/
+/*!
+ @brief Destructor
+*/
+/**************************************************************************/
+GattService::~GattService(void)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Adds a GattCharacterisic to the service.
+
+ @note This function will not update the .handle field in the
+ GattCharacteristic. This value is updated when the parent
+ service is added via the radio driver.
+
+ @param[in] characteristic
+ The GattCharacteristic object describing the characteristic
+ to add to this service
+
+ @returns BLE_ERROR_NONE (0) if everything executed correctly, or an
+ error code if there was a problem
+ @retval BLE_ERROR_NONE
+ Everything executed correctly
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+ble_error_t GattService::addCharacteristic(GattCharacteristic & characteristic)
+{
+ /* ToDo: Make sure we don't overflow the array, etc. */
+ /* ToDo: Make sure this characteristic UUID doesn't already exist */
+ /* ToDo: Basic validation */
+
+ characteristics[characteristicCount] = &characteristic;
+ characteristicCount++;
+
+ return BLE_ERROR_NONE;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/GattService.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/GattService.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,70 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+*/
+
+
+#ifndef __GATT_SERVICE_H__
+#define __GATT_SERVICE_H__
+
+#include "blecommon.h"
+#include "UUID.h"
+#include "GattCharacteristic.h"
+
+#define BLE_SERVICE_MAX_CHARACTERISTICS (5)
+
+/**************************************************************************/
+/*!
+ \brief GATT service
+*/
+/**************************************************************************/
+class GattService
+{
+ private:
+
+ public:
+ GattService(uint8_t[16]); /* 128-bit Base UUID */
+ GattService(uint16_t); /* 16-bit BLE UUID */
+ virtual ~GattService(void);
+
+ UUID primaryServiceID;
+ uint8_t characteristicCount;
+ GattCharacteristic* characteristics[BLE_SERVICE_MAX_CHARACTERISTICS];
+ uint16_t handle;
+
+ ble_error_t addCharacteristic(GattCharacteristic &);
+
+ enum {
+ UUID_ALERT_NOTIFICATION_SERVICE = 0x1811,
+ UUID_BATTERY_SERVICE = 0x180F,
+ UUID_BLOOD_PRESSURE_SERVICE = 0x1810,
+ UUID_CURRENT_TIME_SERVICE = 0x1805,
+ UUID_CYCLING_SPEED_AND_CADENCE = 0x1816,
+ UUID_DEVICE_INFORMATION_SERVICE = 0x180A,
+ UUID_GLUCOSE_SERVICE = 0x1808,
+ UUID_HEALTH_THERMOMETER_SERVICE = 0x1809,
+ UUID_HEART_RATE_SERVICE = 0x180D,
+ UUID_HUMAN_INTERFACE_DEVICE_SERVICE = 0x1812,
+ UUID_IMMEDIATE_ALERT_SERVICE = 0x1802,
+ UUID_LINK_LOSS_SERVICE = 0x1803,
+ UUID_NEXT_DST_CHANGE_SERVICE = 0x1807,
+ UUID_PHONE_ALERT_STATUS_SERVICE = 0x180E,
+ UUID_REFERENCE_TIME_UPDATE_SERVICE = 0x1806,
+ UUID_RUNNING_SPEED_AND_CADENCE = 0x1814,
+ UUID_SCAN_PARAMETERS_SERVICE = 0x1813,
+ UUID_TX_POWER_SERVICE = 0x1804
+ };
+};
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/UUID.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/UUID.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,194 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#include <stdio.h>
+#include <string.h>
+
+#include "UUID.h"
+
+/**************************************************************************/
+/*!
+ @brief Creates an empty 128-bit UUID
+
+ @note This UUID must be assigned a valid value via the 'update'
+ function before it can be safely used!
+*/
+/**************************************************************************/
+UUID::UUID(void)
+{
+ memset(base, 0, 16);
+ value = 0;
+ type = UUID_TYPE_SHORT;
+}
+
+/**************************************************************************/
+/*!
+ @brief Creates a new 128-bit UUID
+
+ @note The UUID is a unique 128-bit (16 byte) ID used to identify
+ different service or characteristics on the BLE device.
+
+ @note When creating a UUID, the constructor will check if all bytes
+ except bytes 2/3 are equal to 0. If only bytes 2/3 have a
+ value, the UUID will be treated as a short/BLE UUID, and the
+ .type field will be set to UUID::UUID_TYPE_SHORT. If any
+ of the bytes outside byte 2/3 have a non-zero value, the UUID
+ will be considered a 128-bit ID, and .type will be assigned
+ as UUID::UUID_TYPE_LONG.
+
+ @param[in] uuid_base
+ The 128-bit (16-byte) UUID value. For 128-bit values,
+ assign all 16 bytes. For 16-bit values, assign the
+ 16-bits to byte 2 and 3, and leave the rest of the bytes
+ as 0.
+
+ @section EXAMPLE
+
+ @code
+
+ // Create a short UUID (0x180F)
+ uint8_t shortID[16] = { 0, 0, 0x0F, 0x18, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+ UUID ble_uuid = UUID(shortID);
+ // ble_uuid.type = UUID_TYPE_SHORT
+ // ble_uuid.value = 0x180F
+
+ // Creeate a long UUID
+ uint8_t longID[16] = { 0x00, 0x11, 0x22, 0x33,
+ 0x44, 0x55, 0x66, 0x77,
+ 0x88, 0x99, 0xAA, 0xBB,
+ 0xCC, 0xDD, 0xEE, 0xFF };
+ UUID custom_uuid = UUID(longID);
+ // custom_uuid.type = UUID_TYPE_LONG
+ // custom_uuid.value = 0x3322
+ // custom_uuid.base = 00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
+
+ @endcode
+*/
+/**************************************************************************/
+UUID::UUID(uint8_t const uuid_base[16])
+{
+ memcpy(base, uuid_base, 16);
+ value = (uint16_t)((uuid_base[3] << 8) | (uuid_base[2]));
+
+ /* Check if this is a short of a long UUID */
+ if (uuid_base[0] + uuid_base[1] +
+ uuid_base[4] + uuid_base[5] + uuid_base[6] + uuid_base[7] +
+ uuid_base[8] + uuid_base[9] + uuid_base[10] + uuid_base[11] +
+ uuid_base[12] + uuid_base[13] + uuid_base[14] + uuid_base[15] == 0)
+ {
+ type = UUID_TYPE_SHORT;
+ }
+ else
+ {
+ type = UUID_TYPE_LONG;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Creates a short (16-bit) UUID
+
+ @param[in] ble_uuid
+ The 16-bit BLE UUID value.
+*/
+/**************************************************************************/
+UUID::UUID(uint16_t const ble_uuid)
+{
+ memset(base, 0, 16);
+ memcpy(base+2, (uint8_t *)&ble_uuid, 2);
+ value = ble_uuid;
+ type = UUID_TYPE_SHORT;
+}
+
+/**************************************************************************/
+/*!
+ @brief UUID destructor
+*/
+/**************************************************************************/
+UUID::~UUID(void)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Updates the value of the UUID
+
+ @args[in] uuid_base
+ The 128-bit value to use when updating the UUID. For
+ 16-bit IDs, insert the ID in bytes 2/3 in LSB format.
+
+ @returns BLE_ERROR_NONE (0) if everything executed correctly, or an
+ error code if there was a problem
+ @retval BLE_ERROR_NONE
+ Everything executed correctly
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+ble_error_t UUID::update(uint8_t const uuid_base[16])
+{
+ memcpy(base, uuid_base, 16);
+ value = (uint16_t)((uuid_base[3] << 8) | (uuid_base[2]));
+
+ /* Check if this is a short of a long UUID */
+ if (uuid_base[0] + uuid_base[1] +
+ uuid_base[4] + uuid_base[5] + uuid_base[6] + uuid_base[7] +
+ uuid_base[8] + uuid_base[9] + uuid_base[10] + uuid_base[11] +
+ uuid_base[12] + uuid_base[13] + uuid_base[14] + uuid_base[15] == 0)
+ {
+ type = UUID_TYPE_SHORT;
+ }
+ else
+ {
+ type = UUID_TYPE_LONG;
+ }
+
+ return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Updates the value of the UUID
+
+ @args[in] ble_uuid
+ The 16-bit value to use when updating the UUID.
+
+ @returns BLE_ERROR_NONE (0) if everything executed correctly, or an
+ error code if there was a problem
+ @retval BLE_ERROR_NONE
+ Everything executed correctly
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+ble_error_t UUID::update(uint16_t const ble_uuid)
+{
+ memset(base, 0, 16);
+ memcpy(base+2, (uint8_t *)&ble_uuid, 2);
+ value = ble_uuid;
+ type = UUID_TYPE_SHORT;
+
+ return BLE_ERROR_NONE;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/UUID.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/UUID.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,47 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#ifndef __UUID_H__
+#define __UUID_H__
+
+#include "blecommon.h"
+
+class UUID
+{
+private:
+
+public:
+ enum
+ {
+ UUID_TYPE_SHORT = 0, // Short BLE UUID
+ UUID_TYPE_LONG = 1 // Full 128-bit UUID
+ };
+
+ UUID(void);
+ UUID(uint8_t const[16]);
+ UUID(uint16_t const);
+ virtual ~UUID(void);
+
+ uint8_t type; // UUID_TYPE_SHORT or UUID_TYPE_LONG
+ uint8_t base[16]; // in case of custom
+ uint16_t value; // 16 bit uuid (byte 2-3 using with base)
+
+ ble_error_t update(uint8_t const[16]);
+ ble_error_t update(uint16_t const);
+};
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/blecommon.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/blecommon.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,48 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __BLE_COMMON_H__
+#define __BLE_COMMON_H__
+
+#define NRF51
+#define DEBUG_NRF_USER
+#define BLE_STACK_SUPPORT_REQD
+#define BOARD_PCA10001
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**************************************************************************/
+/*!
+ \brief Error codes for the BLE API
+*/
+/**************************************************************************/
+typedef enum ble_error_e
+{
+ BLE_ERROR_NONE = 0, /**< No error */
+ BLE_ERROR_BUFFER_OVERFLOW = 1, /**< The requested action would cause a buffer overflow and has been aborted */
+ BLE_ERROR_NOT_IMPLEMENTED = 2, /**< Requested a feature that isn't yet implement or isn't supported by the target HW */
+ BLE_ERROR_PARAM_OUT_OF_RANGE = 3 /**< One of the supplied parameters is outside the valid range */
+} ble_error_t;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/BLEDevice.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/BLEDevice.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,41 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __BLE_DEVICE_H__
+#define __BLE_DEVICE_H__
+
+#include "mbed.h"
+#include "blecommon.h"
+#include "hw/Gap.h"
+#include "hw/GattServer.h"
+
+/**************************************************************************/
+/*!
+ \brief
+ The base class used to abstract away BLE capable radio transceivers
+ or SOCs, to enable this BLE API to work with any radio transparently.
+*/
+/**************************************************************************/
+class BLEDevice
+{
+ public:
+ virtual Gap& getGap() = 0;
+ virtual GattServer& getGattServer() = 0;
+ virtual ble_error_t init() = 0;
+ virtual ble_error_t reset(void) = 0;
+};
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/Gap.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/Gap.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,76 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __GAP_H__
+#define __GAP_H__
+
+#include "mbed.h"
+#include "blecommon.h"
+#include "GapAdvertisingData.h"
+#include "GapAdvertisingParams.h"
+#include "GapEvents.h"
+
+/**************************************************************************/
+/*!
+ \brief
+ The base class used to abstract GAP functionality to a specific radio
+ transceiver, SOC or BLE Stack.
+*/
+/**************************************************************************/
+class Gap
+{
+ private:
+ GapEvents *m_pEventHandler;
+
+ public:
+ /* These functions must be defined in the sub-class */
+ virtual ble_error_t setAdvertisingData(GapAdvertisingData &, GapAdvertisingData &) = 0;
+ virtual ble_error_t startAdvertising(GapAdvertisingParams &) = 0;
+ virtual ble_error_t stopAdvertising(void) = 0;
+ virtual ble_error_t disconnect(void) = 0;
+
+ /* Describes the current state of the device (more than one bit can be set) */
+ typedef struct GapState_s
+ {
+ unsigned advertising : 1; /**< The device is current advertising */
+ unsigned connected : 1; /**< The peripheral is connected to a central device */
+ } GapState_t;
+
+ /* Event callback handlers */
+ void setEventHandler(GapEvents *pEventHandler) {m_pEventHandler = pEventHandler;}
+ void handleEvent(GapEvents::gapEvent_e type) {
+ if (NULL == m_pEventHandler)
+ return;
+ switch(type) {
+ case GapEvents::GAP_EVENT_TIMEOUT:
+ state.advertising = 0;
+ m_pEventHandler->onTimeout();
+ break;
+ case GapEvents::GAP_EVENT_CONNECTED:
+ state.connected = 1;
+ m_pEventHandler->onConnected();
+ break;
+ case GapEvents::GAP_EVENT_DISCONNECTED:
+ state.connected = 0;
+ m_pEventHandler->onDisconnected();
+ break;
+ }
+ }
+
+ GapState_t state;
+};
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/GapEvents.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/GapEvents.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,71 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __GAP_EVENTS_H__
+#define __GAP_EVENTS_H__
+
+#include "blecommon.h"
+#include "mbed.h"
+
+/**************************************************************************/
+/*!
+ \brief
+ The base class used to abstract away the callback events that can be
+ triggered with the GAP.
+*/
+/**************************************************************************/
+class GapEvents {
+ public:
+ /******************************************************************/
+ /*!
+ \brief
+ Identifies GAP events generated by the radio HW when an event
+ callback occurs
+ */
+ /******************************************************************/
+ typedef enum gapEvent_e
+ {
+ GAP_EVENT_TIMEOUT = 1, /**< Advertising timed out before a connection was established */
+ GAP_EVENT_CONNECTED = 2, /**< A connection was established with a central device */
+ GAP_EVENT_DISCONNECTED = 3 /**< A connection was closed or lost with a central device */
+ } gapEvent_t;
+
+ /******************************************************************/
+ /*!
+ \brief
+ Advertising timed out before a connection was established
+ */
+ /******************************************************************/
+ virtual void onTimeout(void) {}
+
+ /******************************************************************/
+ /*!
+ \brief
+ A connection was established with a central device
+ */
+ /******************************************************************/
+ virtual void onConnected(void) {}
+
+ /******************************************************************/
+ /*!
+ \brief
+ A connection was closed or lost with a central device
+ */
+ /******************************************************************/
+ virtual void onDisconnected(void) {}
+};
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/GattServer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/GattServer.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,76 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __GATT_SERVER_H__
+#define __GATT_SERVER_H__
+
+#include "mbed.h"
+#include "blecommon.h"
+#include "GattService.h"
+#include "GattServerEvents.h"
+
+/**************************************************************************/
+/*!
+ \brief
+ The base class used to abstract GATT Server functionality to a specific
+ radio transceiver, SOC or BLE Stack.
+*/
+/**************************************************************************/
+class GattServer
+{
+ private:
+ GattServerEvents *m_pEventHandler;
+
+ public:
+ /* These functions must be defined in the sub-class */
+ virtual ble_error_t addService(GattService &) = 0;
+ virtual ble_error_t readValue(uint16_t, uint8_t[], uint16_t) = 0;
+ virtual ble_error_t updateValue(uint16_t, uint8_t[], uint16_t) = 0;
+
+ // ToDo: For updateValue, check the CCCD to see if the value we are
+ // updating has the notify or indicate bits sent, and if BOTH are set
+ // be sure to call sd_ble_gatts_hvx() twice with notify then indicate!
+ // Strange use case, but valid and must be covered!
+
+ /* Event callback handlers */
+ void setEventHandler(GattServerEvents *pEventHandler) {m_pEventHandler = pEventHandler;}
+ void handleEvent(GattServerEvents::gattEvent_e type, uint16_t charHandle) {
+ if (NULL == m_pEventHandler)
+ return;
+ switch(type) {
+ case GattServerEvents::GATT_EVENT_DATA_SENT:
+ m_pEventHandler->onDataSent(charHandle);
+ break;
+ case GattServerEvents::GATT_EVENT_DATA_WRITTEN:
+ m_pEventHandler->onDataWritten(charHandle);
+ break;
+ case GattServerEvents::GATT_EVENT_UPDATES_ENABLED:
+ m_pEventHandler->onUpdatesEnabled(charHandle);
+ break;
+ case GattServerEvents::GATT_EVENT_UPDATES_DISABLED:
+ m_pEventHandler->onUpdatesDisabled(charHandle);
+ break;
+ case GattServerEvents::GATT_EVENT_CONFIRMATION_RECEIVED:
+ m_pEventHandler->onConfirmationReceived(charHandle);
+ break;
+ }
+ }
+
+ uint8_t serviceCount;
+ uint8_t characteristicCount;
+};
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/GattServerEvents.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/GattServerEvents.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,91 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __GATT_SERVER_EVENTS_H__
+#define __GATT_SERVER_EVENTS_H__
+
+#include "blecommon.h"
+#include "mbed.h"
+
+/**************************************************************************/
+/*!
+ \brief
+ The base class used to abstract away the callback events that can be
+ triggered with the GATT Server.
+*/
+/**************************************************************************/
+class GattServerEvents {
+ public:
+ /******************************************************************/
+ /*!
+ \brief
+ Identifies GATT events generated by the radio HW when an event
+ callback occurs
+ */
+ /******************************************************************/
+ typedef enum gattEvent_e
+ {
+ GATT_EVENT_DATA_SENT = 1, /**< Fired when a msg was successfully sent out (notify only?) */
+ GATT_EVENT_DATA_WRITTEN = 2, /**< Client wrote data to Server (separate into char and descriptor writes?) */
+ GATT_EVENT_UPDATES_ENABLED = 3, /**< Notify/Indicate Enabled in CCCD */
+ GATT_EVENT_UPDATES_DISABLED = 4, /**< Notify/Indicate Disabled in CCCD */
+ GATT_EVENT_CONFIRMATION_RECEIVED = 5 /**< Response received from Indicate message */
+ } gattEvent_t;
+
+ /******************************************************************/
+ /*!
+ \brief
+ A message was successfully transmitted
+ */
+ /******************************************************************/
+ virtual void onDataSent(uint16_t charHandle) {}
+
+ /******************************************************************/
+ /*!
+ \brief
+ The GATT client (the phone, tablet, etc.) wrote data to a
+ characteristic or descriptor on the GATT Server (the peripheral
+ device).
+ */
+ /******************************************************************/
+ virtual void onDataWritten(uint16_t charHandle) {}
+
+ /******************************************************************/
+ /*!
+ \brief
+ A Notify or Indicate flag was enabled in the CCCD
+ */
+ /******************************************************************/
+ virtual void onUpdatesEnabled(uint16_t charHandle) {}
+
+ /******************************************************************/
+ /*!
+ \brief
+ A Notify or Indicate flag was disabled in the CCCD
+ */
+ /******************************************************************/
+ virtual void onUpdatesDisabled(uint16_t charHandle) {}
+
+ /******************************************************************/
+ /*!
+ \brief
+ A confirmation response was received from an Indicate message
+ */
+ /******************************************************************/
+ virtual void onConfirmationReceived(uint16_t charHandle) {}
+};
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/btle/btle.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/btle/btle.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,220 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "common/common.h"
+
+#include "app_timer.h"
+#include "btle.h"
+
+#include "ble_stack_handler_types.h"
+#include "ble_radio_notification.h"
+#include "ble_flash.h"
+#include "ble_bondmngr.h"
+#include "ble_conn_params.h"
+
+#include "btle_gap.h"
+#include "btle_advertising.h"
+#include "custom/custom_helper.h"
+
+#include "nordic_common.h"
+#include "softdevice_handler.h"
+#include "pstorage.h"
+
+#include "hw/GapEvents.h"
+#include "hw/nRF51822n/nRF51Gap.h"
+#include "hw/nRF51822n/nRF51GattServer.h"
+
+static void service_error_callback(uint32_t nrf_error);
+void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name);
+void app_error_handler(uint32_t error_code, uint32_t line_num, const uint8_t * p_file_name);
+
+static error_t bond_manager_init(void);
+
+static void btle_handler(ble_evt_t * p_ble_evt);
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+static void sys_evt_dispatch(uint32_t sys_evt)
+{
+ pstorage_sys_event_handler(sys_evt);
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises BTLE and the underlying HW/SoftDevice
+
+ @returns
+*/
+/**************************************************************************/
+error_t btle_init(void)
+{
+ APP_TIMER_INIT(0, 8, 5, false);
+ SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, false);
+
+ ASSERT_STATUS( softdevice_ble_evt_handler_set(btle_handler) );
+ ASSERT_STATUS( softdevice_sys_evt_handler_set(sys_evt_dispatch) );
+
+ bond_manager_init();
+ btle_gap_init();
+
+ return ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief
+
+ @param[in] p_ble_evt
+
+ @returns
+*/
+/**************************************************************************/
+static void btle_handler(ble_evt_t * p_ble_evt)
+{
+ /* Library service handlers */
+ ble_bondmngr_on_ble_evt(p_ble_evt);
+ ble_conn_params_on_ble_evt(p_ble_evt);
+
+ /* Custom event handler */
+ switch (p_ble_evt->header.evt_id)
+ {
+ case BLE_GAP_EVT_CONNECTED:
+ nRF51GattServer::getInstance().m_connectionHandle = p_ble_evt->evt.gap_evt.conn_handle;
+ nRF51Gap::getInstance().handleEvent(GapEvents::GAP_EVENT_CONNECTED);
+ break;
+
+ case BLE_GAP_EVT_DISCONNECTED:
+ // Since we are not in a connection and have not started advertising, store bonds
+ nRF51GattServer::getInstance().m_connectionHandle = BLE_CONN_HANDLE_INVALID;
+ ASSERT_STATUS_RET_VOID ( ble_bondmngr_bonded_centrals_store() );
+ nRF51Gap::getInstance().handleEvent(GapEvents::GAP_EVENT_DISCONNECTED);
+ break;
+
+ case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
+ {
+ ble_gap_sec_params_t sec_params = { 0 };
+
+ sec_params.timeout = 30 ; /**< Timeout for Pairing Request or Security Request (in seconds). */
+ sec_params.bond = 1 ; /**< Perform bonding. */
+ sec_params.mitm = CFG_BLE_SEC_PARAM_MITM ;
+ sec_params.io_caps = CFG_BLE_SEC_PARAM_IO_CAPABILITIES ;
+ sec_params.oob = CFG_BLE_SEC_PARAM_OOB ;
+ sec_params.min_key_size = CFG_BLE_SEC_PARAM_MIN_KEY_SIZE ;
+ sec_params.max_key_size = CFG_BLE_SEC_PARAM_MAX_KEY_SIZE ;
+
+ ASSERT_STATUS_RET_VOID ( sd_ble_gap_sec_params_reply(nRF51GattServer::getInstance().m_connectionHandle, BLE_GAP_SEC_STATUS_SUCCESS, &sec_params) );
+ }
+ break;
+
+ case BLE_GAP_EVT_TIMEOUT:
+ if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISEMENT)
+ {
+ nRF51Gap::getInstance().handleEvent(GapEvents::GAP_EVENT_TIMEOUT);
+ }
+ break;
+
+ case BLE_GATTC_EVT_TIMEOUT:
+ case BLE_GATTS_EVT_TIMEOUT:
+ // Disconnect on GATT Server and Client timeout events.
+ // ASSERT_STATUS_RET_VOID (sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION));
+ break;
+
+ default:
+ break;
+ }
+
+ nRF51GattServer::getInstance().hwCallback(p_ble_evt);
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the bond manager
+
+ @note Bond data will be cleared on reset if the bond delete
+ button is pressed during initialisation (the button is
+ defined as CFG_BLE_BOND_DELETE_BUTTON_NUM).
+
+ @returns
+*/
+/**************************************************************************/
+static error_t bond_manager_init(void)
+{
+ ble_bondmngr_init_t bond_para = { 0 };
+
+ ASSERT_STATUS ( pstorage_init() );
+
+ bond_para.flash_page_num_bond = CFG_BLE_BOND_FLASH_PAGE_BOND ;
+ bond_para.flash_page_num_sys_attr = CFG_BLE_BOND_FLASH_PAGE_SYS_ATTR ;
+ //bond_para.bonds_delete = boardButtonCheck(CFG_BLE_BOND_DELETE_BUTTON_NUM) ;
+ bond_para.evt_handler = NULL ;
+ bond_para.error_handler = service_error_callback ;
+
+ ASSERT_STATUS( ble_bondmngr_init( &bond_para ) );
+
+ /* Init radio active/inactive notification to flash (to only perform flashing when the radio is inactive) */
+ // ASSERT_STATUS( ble_radio_notification_init(NRF_APP_PRIORITY_HIGH,
+ // NRF_RADIO_NOTIFICATION_DISTANCE_4560US,
+ // ble_flash_on_radio_active_evt) );
+
+ return ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief
+ @param[in] nrf_error
+ @returns
+*/
+/**************************************************************************/
+static void service_error_callback(uint32_t nrf_error)
+{
+ ASSERT_STATUS_RET_VOID( nrf_error );
+}
+
+/**************************************************************************/
+/*!
+ @brief Callback when an error occurs inside the SoftDevice
+
+ @param[in] line_num
+ @param[in] p-file_name
+
+ @returns
+*/
+/**************************************************************************/
+void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name)
+{
+ ASSERT(false, (void) 0);
+}
+
+/**************************************************************************/
+/*!
+ @brief Handler for general errors above the SoftDevice layer.
+ Typically we can' recover from this so we do a reset.
+
+ @param[in] error_code
+ @param[in] line_num
+ @param[in] p-file_name
+
+ @returns
+*/
+/**************************************************************************/
+void app_error_handler(uint32_t error_code, uint32_t line_num, const uint8_t * p_file_name)
+{
+ ASSERT_STATUS_RET_VOID( error_code );
+ NVIC_SystemReset();
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/btle/btle.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/btle/btle.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,35 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef _BTLE_H_
+#define _BTLE_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "common/common.h"
+
+#include "ble_srv_common.h"
+#include "ble.h"
+
+error_t btle_init(void);
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/btle/btle_advertising.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/btle/btle_advertising.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,43 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "common/common.h"
+
+#include "ble_advdata.h"
+#include "btle.h"
+
+/**************************************************************************/
+/*!
+ @brief Starts the advertising process
+
+ @returns
+*/
+/**************************************************************************/
+error_t btle_advertising_start(void)
+{
+ ble_gap_adv_params_t adv_para = { 0 };
+
+ /* Set the default advertising parameters */
+ adv_para.type = BLE_GAP_ADV_TYPE_ADV_IND ;
+ adv_para.p_peer_addr = NULL ; /* Undirected advertising */
+ adv_para.fp = BLE_GAP_ADV_FP_ANY ;
+ adv_para.p_whitelist = NULL ;
+ adv_para.interval = (CFG_GAP_ADV_INTERVAL_MS*8)/5 ; /* Advertising interval in units of 0.625 ms */
+ adv_para.timeout = CFG_GAP_ADV_TIMEOUT_S ;
+
+ ASSERT_STATUS( sd_ble_gap_adv_start(&adv_para) );
+
+ return ERROR_NONE;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/btle/btle_advertising.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/BLE_API_Native/hw/nRF51822n/btle/btle_advertising.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,24 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _BTLE_ADVERTISING_H_ +#define _BTLE_ADVERTISING_H_ + +#include "common/common.h" + +error_t btle_advertising_start(void); + +#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/btle/btle_gap.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/btle/btle_gap.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,90 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "common/common.h"
+
+#include "app_timer.h"
+#include "ble_gap.h"
+#include "ble_conn_params.h"
+
+static inline uint32_t msec_to_1_25msec(uint32_t interval_ms) ATTR_ALWAYS_INLINE ATTR_CONST;
+static void error_callback(uint32_t nrf_error);
+
+/**************************************************************************/
+/*!
+ @brief Initialise GAP in the underlying SoftDevice
+
+ @returns
+*/
+/**************************************************************************/
+error_t btle_gap_init(void)
+{
+ ble_gap_conn_params_t gap_conn_params = { 0 };
+
+ gap_conn_params.min_conn_interval = msec_to_1_25msec(CFG_GAP_CONNECTION_MIN_INTERVAL_MS) ; // in 1.25ms unit
+ gap_conn_params.max_conn_interval = msec_to_1_25msec(CFG_GAP_CONNECTION_MAX_INTERVAL_MS) ; // in 1.25ms unit
+ gap_conn_params.slave_latency = CFG_GAP_CONNECTION_SLAVE_LATENCY ;
+ gap_conn_params.conn_sup_timeout = CFG_GAP_CONNECTION_SUPERVISION_TIMEOUT_MS / 10 ; // in 10ms unit
+
+ ble_gap_conn_sec_mode_t sec_mode;
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode); // no security is needed
+
+ ASSERT_STATUS( sd_ble_gap_device_name_set(&sec_mode, (const uint8_t *) CFG_GAP_LOCAL_NAME, strlen(CFG_GAP_LOCAL_NAME)) );
+ ASSERT_STATUS( sd_ble_gap_appearance_set(CFG_GAP_APPEARANCE) );
+ ASSERT_STATUS( sd_ble_gap_ppcp_set(&gap_conn_params) );
+ ASSERT_STATUS( sd_ble_gap_tx_power_set(CFG_BLE_TX_POWER_LEVEL) );
+
+ /* Connection Parameters */
+ enum {
+ FIRST_UPDATE_DELAY = APP_TIMER_TICKS(5000, CFG_TIMER_PRESCALER),
+ NEXT_UPDATE_DELAY = APP_TIMER_TICKS(5000, CFG_TIMER_PRESCALER),
+ MAX_UPDATE_COUNT = 3
+ };
+
+ ble_conn_params_init_t cp_init = { 0 };
+
+ cp_init.p_conn_params = NULL ;
+ cp_init.first_conn_params_update_delay = FIRST_UPDATE_DELAY ;
+ cp_init.next_conn_params_update_delay = NEXT_UPDATE_DELAY ;
+ cp_init.max_conn_params_update_count = MAX_UPDATE_COUNT ;
+ cp_init.start_on_notify_cccd_handle = BLE_GATT_HANDLE_INVALID ;
+ cp_init.disconnect_on_fail = true ;
+ cp_init.evt_handler = NULL ;
+ cp_init.error_handler = error_callback;
+
+ ASSERT_STATUS ( ble_conn_params_init(&cp_init) );
+
+ return ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Converts msecs to an integer representing 1.25ms units
+
+ @param[in] ms
+ The number of milliseconds to conver to 1.25ms units
+
+ @returns The number of 1.25ms units in the supplied number of ms
+*/
+/**************************************************************************/
+static inline uint32_t msec_to_1_25msec(uint32_t interval_ms)
+{
+ return (interval_ms * 4) / 5 ;
+}
+
+static void error_callback(uint32_t nrf_error)
+{
+ ASSERT_STATUS_RET_VOID( nrf_error );
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/btle/btle_gap.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/BLE_API_Native/hw/nRF51822n/btle/btle_gap.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,24 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _BTLE_GAP_H_ +#define _BTLE_GAP_H_ + +#include "common/common.h" + +error_t btle_gap_init(void); + +#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/btle/custom/custom_helper.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/btle/custom/custom_helper.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,163 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+ #include "custom_helper.h"
+
+/**************************************************************************/
+/*!
+ @brief Adds the base UUID to the custom service. All UUIDs used
+ by this service are based on this 128-bit UUID.
+
+ @note This UUID needs to be added to the SoftDevice stack before
+ adding the service's primary service via
+ 'sd_ble_gatts_service_add'
+
+ @param[in] p_uuid_base A pointer to the 128-bit UUID array (8*16)
+
+ @returns The UUID type.
+ A return value of 0 should be considered an error.
+
+ @retval 0x00 BLE_UUID_TYPE_UNKNOWN
+ @retval 0x01 BLE_UUID_TYPE_BLE
+ @retval 0x02 BLE_UUID_TYPE_VENDOR_BEGIN
+
+ @section EXAMPLE
+ @code
+
+ // Take note that bytes 2/3 are blank since these are used to identify
+ // the primary service and individual characteristics
+ #define CFG_CUSTOM_UUID_BASE "\x6E\x40\x00\x00\xB5\xA3\xF3\x93\xE0\xA9\xE5\x0E\x24\xDC\xCA\x9E"
+
+ uint8_t uuid_type = custom_add_uuid_base(CFG_CUSTOM_UUID_BASE);
+ ASSERT(uuid_type > 0, ERROR_NOT_FOUND);
+
+ // We can now safely add the primary service and any characteristics
+ // for our custom service ...
+
+ @endcode
+*/
+/**************************************************************************/
+uint8_t custom_add_uuid_base(uint8_t const * const p_uuid_base)
+{
+ ble_uuid128_t base_uuid;
+ uint8_t uuid_type = 0;
+
+ /* Reverse the bytes since ble_uuid128_t is LSB */
+ for(uint8_t i=0; i<16; i++)
+ {
+ base_uuid.uuid128[i] = p_uuid_base[15-i];
+ }
+
+ ASSERT_INT( ERROR_NONE, sd_ble_uuid_vs_add( &base_uuid, &uuid_type ), 0);
+
+ return uuid_type;
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+error_t custom_decode_uuid_base(uint8_t const * const p_uuid_base, ble_uuid_t * p_uuid)
+{
+ uint8_t uuid_base_le[16];
+
+ /* Reverse the bytes since ble_uuid128_t is LSB */
+ for(uint8_t i=0; i<16; i++)
+ {
+ uuid_base_le[i] = p_uuid_base[15-i];
+ }
+
+ ASSERT_STATUS( sd_ble_uuid_decode(16, uuid_base_le, p_uuid) );
+
+ return ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Adds a new characteristic to the custom service, assigning
+ properties, a UUID add-on value, etc.
+
+ @param[in] service_handle
+ @param[in] p_uuid The 16-bit value to add to the base UUID
+ for this characteristic (normally >1
+ since 1 is typically used by the primary
+ service).
+ @param[in] char_props The characteristic properties, as
+ defined by ble_gatt_char_props_t
+ @param[in] max_length The maximum length of this characeristic
+ @param[in] p_char_handle
+
+ @returns
+ @retval ERROR_NONE Everything executed normally
+*/
+/**************************************************************************/
+error_t custom_add_in_characteristic(uint16_t service_handle, ble_uuid_t* p_uuid, uint8_t properties,
+ uint8_t *p_data, uint16_t min_length, uint16_t max_length,
+ ble_gatts_char_handles_t* p_char_handle)
+{
+ /* Characteristic metadata */
+ ble_gatts_attr_md_t cccd_md;
+ ble_gatt_char_props_t char_props;
+
+ memcpy(&char_props, &properties, 1);
+
+ if ( char_props.notify || char_props.indicate )
+ {
+ /* Notification requires cccd */
+ memclr_( &cccd_md, sizeof(ble_gatts_attr_md_t) );
+ cccd_md.vloc = BLE_GATTS_VLOC_STACK;
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.read_perm);
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.write_perm);
+ }
+
+ ble_gatts_char_md_t char_md = { 0 };
+
+ char_md.char_props = char_props;
+ char_md.p_cccd_md = (char_props.notify || char_props.indicate ) ? &cccd_md : NULL;
+
+ /* Attribute declaration */
+ ble_gatts_attr_md_t attr_md = { 0 };
+
+ attr_md.vloc = BLE_GATTS_VLOC_STACK;
+ attr_md.vlen = (min_length == max_length) ? 0 : 1;
+
+ if ( char_props.read || char_props.notify || char_props.indicate )
+ {
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&attr_md.read_perm);
+ }
+
+ if ( char_props.write )
+ {
+ BLE_GAP_CONN_SEC_MODE_SET_OPEN(&attr_md.write_perm);
+ }
+
+ ble_gatts_attr_t attr_char_value = { 0 };
+
+ attr_char_value.p_uuid = p_uuid;
+ attr_char_value.p_attr_md = &attr_md;
+ attr_char_value.init_len = min_length;
+ attr_char_value.max_len = max_length;
+ attr_char_value.p_value = p_data;
+
+
+ ASSERT_STATUS ( sd_ble_gatts_characteristic_add(service_handle,
+ &char_md,
+ &attr_char_value,
+ p_char_handle) );
+
+ return ERROR_NONE;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/btle/custom/custom_helper.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/btle/custom/custom_helper.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,38 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef _CUSTOM_HELPER_H_
+#define _CUSTOM_HELPER_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "common/common.h"
+#include "ble.h"
+
+uint8_t custom_add_uuid_base(uint8_t const * const p_uuid_base);
+error_t custom_decode_uuid(uint8_t const * const p_uuid_base, ble_uuid_t * p_uuid);
+
+error_t custom_add_in_characteristic(uint16_t service_handle, ble_uuid_t* p_uuid, uint8_t properties,
+ uint8_t *p_data, uint16_t min_length, uint16_t max_length,
+ ble_gatts_char_handles_t* p_char_handle);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/common/ansi_escape.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/common/ansi_escape.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,103 @@
+/**************************************************************************/
+/*!
+ @file ansi_esc_code.h
+ @author hathach (tinyusb.org)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2013, hathach (tinyusb.org)
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is part of the tinyusb stack.
+*/
+/**************************************************************************/
+
+/** \file
+ * \brief TBD
+ *
+ * \note TBD
+ */
+
+/** \ingroup TBD
+ * \defgroup TBD
+ * \brief TBD
+ *
+ * @{
+ */
+
+#ifndef _ANSI_ESC_CODE_H_
+#define _ANSI_ESC_CODE_H_
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define CSI_CODE(seq) "\33[" seq
+#define CSI_SGR(x) CSI_CODE(#x) "m"
+
+//------------- Cursor movement -------------//
+#define ANSI_CURSOR_UP(n) CSI_CODE(#n "A")
+#define ANSI_CURSOR_DOWN(n) CSI_CODE(#n "B")
+#define ANSI_CURSOR_FORWARD(n) CSI_CODE(#n "C")
+#define ANSI_CURSOR_BACKWARD(n) CSI_CODE(#n "D")
+#define ANSI_CURSOR_LINE_DOWN(n) CSI_CODE(#n "E")
+#define ANSI_CURSOR_LINE_UP(n) CSI_CODE(#n "F")
+#define ANSI_CURSOR_POSITION(n, m) CSI_CODE(#n ";" #m "H")
+
+#define ANSI_ERASE_SCREEN(n) CSI_CODE(#n "J")
+#define ANSI_ERASE_LINE(n) CSI_CODE(#n "K")
+
+/** text color */
+#define ANSI_TEXT_BLACK CSI_SGR(30)
+#define ANSI_TEXT_RED CSI_SGR(31)
+#define ANSI_TEXT_GREEN CSI_SGR(32)
+#define ANSI_TEXT_YELLOW CSI_SGR(33)
+#define ANSI_TEXT_BLUE CSI_SGR(34)
+#define ANSI_TEXT_MAGENTA CSI_SGR(35)
+#define ANSI_TEXT_CYAN CSI_SGR(36)
+#define ANSI_TEXT_WHITE CSI_SGR(37)
+#define ANSI_TEXT_DEFAULT CSI_SGR(39)
+
+/** background color */
+#define ANSI_BG_BLACK CSI_SGR(40)
+#define ANSI_BG_RED CSI_SGR(41)
+#define ANSI_BG_GREEN CSI_SGR(42)
+#define ANSI_BG_YELLOW CSI_SGR(43)
+#define ANSI_BG_BLUE CSI_SGR(44)
+#define ANSI_BG_MAGENTA CSI_SGR(45)
+#define ANSI_BG_CYAN CSI_SGR(46)
+#define ANSI_BG_WHITE CSI_SGR(47)
+#define ANSI_BG_DEFAULT CSI_SGR(49)
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_ANSI_ESC_CODE_H_ */
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/common/assertion.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/common/assertion.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,200 @@
+/**************************************************************************/
+/*!
+ @file assertion.h
+ @author hathach (tinyusb.org)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2013, K. Townsend (microBuilder.eu)
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+/** \file
+ * \brief TBD
+ *
+ * \note TBD
+ */
+
+/** \ingroup TBD
+ * \defgroup TBD
+ * \brief TBD
+ *
+ * @{
+ */
+
+#ifndef _ASSERTION_H_
+#define _ASSERTION_H_
+
+#include "projectconfig.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+static inline void debugger_breakpoint(void) ATTR_ALWAYS_INLINE;
+static inline void debugger_breakpoint(void)
+{
+#ifndef _TEST_
+ __asm("BKPT #0\n");
+#endif
+}
+
+//--------------------------------------------------------------------+
+// Compile-time Assert
+//--------------------------------------------------------------------+
+#if defined __COUNTER__ && __COUNTER__ != __COUNTER__
+ #define _ASSERT_COUNTER __COUNTER__
+#else
+ #define _ASSERT_COUNTER __LINE__
+#endif
+
+#define ASSERT_STATIC(const_expr, message) enum { XSTRING_CONCAT_(static_assert_, _ASSERT_COUNTER) = 1/(!!(const_expr)) }
+
+//--------------------------------------------------------------------+
+// Assert Helper
+//--------------------------------------------------------------------+
+//#ifndef _TEST_
+// #define ASSERT_MESSAGE(format, ...)\
+// _PRINTF("Assert at %s: %s: %d: " format "\n", __BASE_FILE__, __PRETTY_FUNCTION__, __LINE__, __VA_ARGS__)
+//#else
+// #define ASSERT_MESSAGE(format, ...)\
+// _PRINTF("%d:note: Assert " format "\n", __LINE__, __VA_ARGS__)
+//#endif
+
+#if CFG_DEBUG == 3
+ #define ASSERT_MESSAGE(format, ...) debugger_breakpoint()
+#elif CFG_DEBUG == 2
+ #define ASSERT_MESSAGE(format, ...) printf("Assert at %s: %s: %d: " format "\n", __BASE_FILE__, __PRETTY_FUNCTION__, __LINE__, __VA_ARGS__)
+#else
+ #define ASSERT_MESSAGE(format, ...)
+#endif
+
+#define ASSERT_ERROR_HANDLER(x, para) \
+ return (x)
+
+#define ASSERT_DEFINE_WITH_HANDLER(error_handler, handler_para, setup_statement, condition, error, format, ...) \
+ do{\
+ setup_statement;\
+ if (!(condition)) {\
+ ASSERT_MESSAGE(format, __VA_ARGS__);\
+ error_handler(error, handler_para);\
+ }\
+ }while(0)
+
+#define ASSERT_DEFINE(...) ASSERT_DEFINE_WITH_HANDLER(ASSERT_ERROR_HANDLER, NULL, __VA_ARGS__)
+
+//--------------------------------------------------------------------+
+// error_t Status Assert TODO use ASSERT_DEFINE
+//--------------------------------------------------------------------+
+#define ASSERT_STATUS_MESSAGE(sts, message) \
+ ASSERT_DEFINE(error_t status = (error_t)(sts),\
+ ERROR_NONE == status, status, "%s: %s", ErrorStr[status], message)
+
+#define ASSERT_STATUS(sts) \
+ ASSERT_DEFINE(error_t status = (error_t)(sts),\
+ ERROR_NONE == status, status, "error = %d", status)
+
+#define ASSERT_STATUS_RET_VOID(sts) \
+ ASSERT_DEFINE(error_t status = (error_t)(sts),\
+ ERROR_NONE == status, (void) 0, "error = %d", status)
+
+//--------------------------------------------------------------------+
+// Logical Assert
+//--------------------------------------------------------------------+
+#define ASSERT(...) ASSERT_TRUE(__VA_ARGS__)
+#define ASSERT_TRUE(condition , error) ASSERT_DEFINE( , (condition), error, "%s", "evaluated to false")
+#define ASSERT_FALSE(condition , error) ASSERT_DEFINE( ,!(condition), error, "%s", "evaluated to true")
+
+//--------------------------------------------------------------------+
+// Pointer Assert
+//--------------------------------------------------------------------+
+#define ASSERT_PTR(...) ASSERT_PTR_NOT_NULL(__VA_ARGS__)
+#define ASSERT_PTR_NOT_NULL(pointer, error) ASSERT_DEFINE( , NULL != (pointer), error, "%s", "pointer is NULL")
+#define ASSERT_PTR_NULL(pointer, error) ASSERT_DEFINE( , NULL == (pointer), error, "%s", "pointer is not NULL")
+
+//--------------------------------------------------------------------+
+// Integral Assert
+//--------------------------------------------------------------------+
+#define ASSERT_XXX_EQUAL(type_format, expected, actual, error) \
+ ASSERT_DEFINE(\
+ uint32_t exp = (expected); uint32_t act = (actual),\
+ exp==act,\
+ error,\
+ "expected " type_format ", actual " type_format, exp, act)
+
+#define ASSERT_XXX_WITHIN(type_format, lower, upper, actual, error) \
+ ASSERT_DEFINE(\
+ uint32_t low = (lower); uint32_t up = (upper); uint32_t act = (actual),\
+ (low <= act) && (act <= up),\
+ error,\
+ "expected within " type_format " - " type_format ", actual " type_format, low, up, act)
+
+//--------------------------------------------------------------------+
+// Integer Assert
+//--------------------------------------------------------------------+
+#define ASSERT_INT(...) ASSERT_INT_EQUAL(__VA_ARGS__)
+#define ASSERT_INT_EQUAL(...) ASSERT_XXX_EQUAL("%d", __VA_ARGS__)
+#define ASSERT_INT_WITHIN(...) ASSERT_XXX_WITHIN("%d", __VA_ARGS__)
+
+//--------------------------------------------------------------------+
+// Hex Assert
+//--------------------------------------------------------------------+
+#define ASSERT_HEX(...) ASSERT_HEX_EQUAL(__VA_ARGS__)
+#define ASSERT_HEX_EQUAL(...) ASSERT_XXX_EQUAL("0x%x", __VA_ARGS__)
+#define ASSERT_HEX_WITHIN(...) ASSERT_XXX_WITHIN("0x%x", __VA_ARGS__)
+
+//--------------------------------------------------------------------+
+// Bin Assert
+//--------------------------------------------------------------------+
+#define BIN8_PRINTF_PATTERN "%d%d%d%d%d%d%d%d"
+#define BIN8_PRINTF_CONVERT(byte) \
+ ((byte) & 0x80 ? 1 : 0), \
+ ((byte) & 0x40 ? 1 : 0), \
+ ((byte) & 0x20 ? 1 : 0), \
+ ((byte) & 0x10 ? 1 : 0), \
+ ((byte) & 0x08 ? 1 : 0), \
+ ((byte) & 0x04 ? 1 : 0), \
+ ((byte) & 0x02 ? 1 : 0), \
+ ((byte) & 0x01 ? 1 : 0)
+
+#define ASSERT_BIN8(...) ASSERT_BIN8_EQUAL(__VA_ARGS__)
+#define ASSERT_BIN8_EQUAL(expected, actual, error)\
+ ASSERT_DEFINE(\
+ uint8_t exp = (expected); uint8_t act = (actual),\
+ exp==act,\
+ error,\
+ "expected " BIN8_PRINTF_PATTERN ", actual " BIN8_PRINTF_PATTERN, BIN8_PRINTF_CONVERT(exp), BIN8_PRINTF_CONVERT(act) )
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _ASSERTION_H_ */
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/common/binary.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/common/binary.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,96 @@
+/**************************************************************************/
+/*!
+ @file binary.h
+ @author hathach (tinyusb.org)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2013, K. Townsend (microBuilder.eu)
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+/** \ingroup TBD
+ * \defgroup TBD
+ * \brief TBD
+ *
+ * @{
+ */
+
+#ifndef _BINARY_H_
+#define _BINARY_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/// n-th Bit
+#define BIT(n) (1 << (n))
+
+/// set n-th bit of x to 1
+#define BIT_SET(x, n) ( (x) | BIT(n) )
+
+/// clear n-th bit of x
+#define BIT_CLR(x, n) ( (x) & (~BIT(n)) )
+
+/// test n-th bit of x
+#define BIT_TEST(x, n) ( (x) & BIT(n) )
+
+#if defined(__GNUC__) && !defined(__CC_ARM) // keil does not support binary format
+
+#define BIN8(x) ((uint8_t) (0b##x))
+#define BIN16(b1, b2) ((uint16_t) (0b##b1##b2))
+#define BIN32(b1, b2, b3, b4) ((uint32_t) (0b##b1##b2##b3##b4))
+
+#else
+
+// internal macro of B8, B16, B32
+#define _B8__(x) (((x&0x0000000FUL)?1:0) \
+ +((x&0x000000F0UL)?2:0) \
+ +((x&0x00000F00UL)?4:0) \
+ +((x&0x0000F000UL)?8:0) \
+ +((x&0x000F0000UL)?16:0) \
+ +((x&0x00F00000UL)?32:0) \
+ +((x&0x0F000000UL)?64:0) \
+ +((x&0xF0000000UL)?128:0))
+
+#define BIN8(d) ((uint8_t) _B8__(0x##d##UL))
+#define BIN16(dmsb,dlsb) (((uint16_t)BIN8(dmsb)<<8) + BIN8(dlsb))
+#define BIN32(dmsb,db2,db3,dlsb) \
+ (((uint32_t)BIN8(dmsb)<<24) \
+ + ((uint32_t)BIN8(db2)<<16) \
+ + ((uint32_t)BIN8(db3)<<8) \
+ + BIN8(dlsb))
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _BINARY_H_ */
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/common/ble_error.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/common/ble_error.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,151 @@
+/**************************************************************************/
+/*!
+ @file ble_error.h
+ @author hathach (tinyusb.org)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2013, K. Townsend (microBuilder.eu)
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+/** \file
+ * \brief Error Header
+ *
+ * \note TBD
+ */
+
+/** \ingroup Group_Common
+ * \defgroup Group_Error Error Codes
+ * @{
+ */
+
+#ifndef _BLE_ERROR_H_
+#define _BLE_ERROR_H_
+
+#include "projectconfig.h"
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+typedef enum
+{
+ /*=======================================================================
+ NORDIC GLOBAL ERRORS 0x0000 .. 0x00FF
+ -----------------------------------------------------------------------
+ Errors mapped from nrf_error.h
+ -----------------------------------------------------------------------*/
+ ERROR_NONE = 0x0000 , ///< Successful command
+ ERROR_SVC_HANDLER_MISSING = 0x0001 , ///< SVC handler is missing
+ ERROR_SOFTDEVICE_NOT_ENABLED = 0x0002 , ///< SoftDevice has not been enabled
+ ERROR_INTERNAL = 0x0003 , ///< Internal Error
+ ERROR_NO_MEM = 0x0004 , ///< No Memory for operation
+ ERROR_NOT_FOUND = 0x0005 , ///< Not found
+ ERROR_NOT_SUPPORTED = 0x0006 , ///< Not supported
+ ERROR_INVALID_PARAM = 0x0007 , ///< Invalid Parameter
+ ERROR_INVALID_STATE = 0x0008 , ///< Invalid state, operation disallowed in this state
+ ERROR_INVALID_LENGTH = 0x0009 , ///< Invalid Length
+ ERROR_INVALID_FLAGS = 0x000A , ///< Invalid Flags
+ ERROR_INVALID_DATA = 0x000B , ///< Invalid Data
+ ERROR_DATA_SIZE = 0x000C , ///< Data size exceeds limit
+ ERROR_TIMEOUT = 0x000D , ///< Operation timed out
+ ERROR_NULL = 0x000E , ///< Null Pointer
+ ERROR_FORBIDDEN = 0x000F , ///< Forbidden Operation
+ ERROR_INVALID_ADDR = 0x0010 , ///< Bad Memory Address
+ ERROR_BUSY = 0x0011 , ///< Busy
+ /*=======================================================================*/
+
+ ERROR_INVALIDPARAMETER = 0x0100 , /**< An invalid parameter value was provided */
+ ERROR_I2C_XFER_FAILED = 0x0101 , /**< an failed attempt to make I2C transfer */
+
+ /*=======================================================================
+ SIMPLE BINARY PROTOCOL ERRORS 0x0120 .. 0x013F
+ -----------------------------------------------------------------------
+ Errors relating to the simple binary protocol (/src//protocol)
+ -----------------------------------------------------------------------*/
+ ERROR_PROT_INVALIDMSGTYPE = 0x121, /**< Unexpected msg type encountered */
+ ERROR_PROT_INVALIDCOMMANDID = 0x122, /**< Unknown or out of range command ID */
+ ERROR_PROT_INVALIDPAYLOAD = 0x123, /**< Message payload has a problem (invalid len, etc.) */
+ /*=======================================================================*/
+
+ //------------- based on Nordic SDM nrf_error_sdm.h -------------//
+ ERROR_SDM_LFCLK_SOURCE_UNKNOWN = 0x1000 , ///< Unknown lfclk source
+ ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION = 0x1001 , ///< Incorrect interrupt configuration (can be caused by using illegal priority levels, or having enabled SoftDevice interrupts)
+ ERROR_SDM_INCORRECT_CLENR0 = 0x1002 , ///< Incorrect CLENR0 (can be caused by erronous SoftDevice flashing)
+
+ //------------- based on Nordic SOC nrf_error_soc.h -------------//
+ /* Mutex Errors */
+ ERROR_SOC_MUTEX_ALREADY_TAKEN = 0x2000 , ///< Mutex already taken
+
+ /* NVIC errors */
+ ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE = 0x2001 , ///< NVIC interrupt not available
+ ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED = 0x2002 , ///< NVIC interrupt priority not allowed
+ ERROR_SOC_NVIC_SHOULD_NOT_RETURN = 0x2003 , ///< NVIC should not return
+
+ /* Power errors */
+ ERROR_SOC_POWER_MODE_UNKNOWN = 0x2004 , ///< Power mode unknown
+ ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN = 0x2005 , ///< Power POF threshold unknown
+ ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN = 0x2006 , ///< Power off should not return
+
+ /* Rand errors */
+ ERROR_SOC_RAND_NOT_ENOUGH_VALUES = 0x2007 , ///< RAND not enough values
+
+ /* PPI errors */
+ ERROR_SOC_PPI_INVALID_CHANNEL = 0x2008 , ///< Invalid PPI Channel
+ ERROR_SOC_PPI_INVALID_GROUP = 0x2009 , ///< Invalid PPI Group
+
+ //------------- based on Nordic STK (ble) ble_err.h -------------//
+ ERROR_BLE_INVALID_CONN_HANDLE = 0x3001 , /**< Invalid connection handle. */
+ ERROR_BLE_INVALID_ATTR_HANDLE = 0x3002 , /**< Invalid attribute handle. */
+ ERROR_BLE_NO_TX_BUFFERS = 0x3003 , /**< Buffer capacity exceeded. */
+
+ // L2CAP
+ ERROR_BLE_L2CAP_CID_IN_USE = 0x3100 , /**< CID already in use. */
+
+ // GAP
+ ERROR_BLE_GAP_UUID_LIST_MISMATCH = 0x3200 , /**< UUID list does not contain an integral number of UUIDs. */
+ ERROR_BLE_GAP_DISCOVERABLE_WITH_WHITELIST = 0x3201 , /**< Use of Whitelist not permitted with discoverable advertising. */
+ ERROR_BLE_GAP_INVALID_BLE_ADDR = 0x3202 , /**< The upper two bits of the address do not correspond to the specified address type. */
+
+ // GATTC
+ ERROR_BLE_GATTC_PROC_NOT_PERMITTED = 0x3300 ,
+
+ // GATTS
+ ERROR_BLEGATTS_INVALID_ATTR_TYPE = 0x3400 , /**< Invalid attribute type. */
+ ERROR_BLEGATTS_SYS_ATTR_MISSING = 0x3401 , /**< System Attributes missing. */
+
+}error_t;
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _BLE_ERROR_H_ */
+
+ /** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/common/common.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/common/common.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,236 @@
+/**************************************************************************/
+/*!
+ @file common.h
+ @author hathach (tinyusb.org)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2013, K. Townsend (microBuilder.eu)
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+/** \defgroup Group_Common Common Files
+ * @{
+ *
+ * \defgroup Group_CommonH common.h
+ *
+ * @{
+ */
+
+#ifndef _COMMON_H_
+#define _COMMON_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// INCLUDES
+//--------------------------------------------------------------------+
+
+//------------- Standard Header -------------//
+#include <stdint.h>
+#include <stdbool.h>
+#include <stddef.h>
+#include <string.h>
+#include <stdio.h>
+
+//------------- General Header -------------//
+#include "projectconfig.h"
+#include "compiler.h"
+#include "assertion.h"
+#include "binary.h"
+#include "ble_error.h"
+
+//------------- MCU header -------------//
+//#include "nrf.h"
+
+//--------------------------------------------------------------------+
+// TYPEDEFS
+//--------------------------------------------------------------------+
+typedef unsigned char byte_t;
+typedef float float32_t;
+typedef double float64_t;
+
+//--------------------------------------------------------------------+
+// MACROS
+//--------------------------------------------------------------------+
+#define STRING_(x) #x // stringify without expand
+#define XSTRING_(x) STRING_(x) // expand then stringify
+#define STRING_CONCAT_(a, b) a##b // concat without expand
+#define XSTRING_CONCAT_(a, b) STRING_CONCAT_(a, b) // expand then concat
+
+#define U16_HIGH_U8(u16) ((uint8_t) (((u16) >> 8) & 0x00ff))
+#define U16_LOW_U8(u16) ((uint8_t) ((u16) & 0x00ff))
+#define U16_TO_U8S_BE(u16) U16_HIGH_U8(u16), U16_LOW_U8(u16)
+#define U16_TO_U8S_LE(u16) U16_LOW_U8(u16), U16_HIGH_U8(u16)
+
+#define U32_B1_U8(u32) ((uint8_t) (((u32) >> 24) & 0x000000ff)) // MSB
+#define U32_B2_U8(u32) ((uint8_t) (((u32) >> 16) & 0x000000ff))
+#define U32_B3_U8(u32) ((uint8_t) (((u32) >> 8) & 0x000000ff))
+#define U32_B4_U8(u32) ((uint8_t) ((u32) & 0x000000ff)) // LSB
+
+#define U32_TO_U8S_BE(u32) U32_B1_U8(u32), U32_B2_U8(u32), U32_B3_U8(u32), U32_B4_U8(u32)
+#define U32_TO_U8S_LE(u32) U32_B4_U8(u32), U32_B3_U8(u32), U32_B2_U8(u32), U32_B1_U8(u32)
+
+//--------------------------------------------------------------------+
+// INLINE FUNCTION
+//--------------------------------------------------------------------+
+#define memclr_(buffer, size) memset(buffer, 0, size)
+
+//------------- Conversion -------------//
+/// form an uint32_t from 4 x uint8_t
+static inline uint32_t u32_from_u8(uint8_t b1, uint8_t b2, uint8_t b3, uint8_t b4) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline uint32_t u32_from_u8(uint8_t b1, uint8_t b2, uint8_t b3, uint8_t b4)
+{
+ return (b1 << 24) + (b2 << 16) + (b3 << 8) + b4;
+}
+
+static inline uint8_t u16_high_u8(uint16_t u16) ATTR_CONST ATTR_ALWAYS_INLINE;
+static inline uint8_t u16_high_u8(uint16_t u16)
+{
+ return (uint8_t) ((u16 >> 8) & 0x00ff);
+}
+
+static inline uint8_t u16_low_u8(uint16_t u16) ATTR_CONST ATTR_ALWAYS_INLINE;
+static inline uint8_t u16_low_u8(uint16_t u16)
+{
+ return (uint8_t) (u16 & 0x00ff);
+}
+
+//------------- Min -------------//
+static inline uint8_t min8_of(uint8_t x, uint8_t y) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline uint8_t min8_of(uint8_t x, uint8_t y)
+{
+ return (x < y) ? x : y;
+}
+
+static inline uint16_t min16_of(uint16_t x, uint16_t y) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline uint16_t min16_of(uint16_t x, uint16_t y)
+{
+ return (x < y) ? x : y;
+}
+
+static inline uint32_t min32_of(uint32_t x, uint32_t y) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline uint32_t min32_of(uint32_t x, uint32_t y)
+{
+ return (x < y) ? x : y;
+}
+
+//------------- Max -------------//
+static inline uint32_t max32_of(uint32_t x, uint32_t y) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline uint32_t max32_of(uint32_t x, uint32_t y)
+{
+ return (x > y) ? x : y;
+}
+
+//------------- Align -------------//
+static inline uint32_t align32 (uint32_t value) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline uint32_t align32 (uint32_t value)
+{
+ return (value & 0xFFFFFFE0UL);
+}
+
+static inline uint32_t align16 (uint32_t value) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline uint32_t align16 (uint32_t value)
+{
+ return (value & 0xFFFFFFF0UL);
+}
+
+static inline uint32_t align_n (uint32_t alignment, uint32_t value) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline uint32_t align_n (uint32_t alignment, uint32_t value)
+{
+ return value & (~(alignment-1));
+}
+
+static inline uint32_t align4k (uint32_t value) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline uint32_t align4k (uint32_t value)
+{
+ return (value & 0xFFFFF000UL);
+}
+
+static inline uint32_t offset4k(uint32_t value) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline uint32_t offset4k(uint32_t value)
+{
+ return (value & 0xFFFUL);
+}
+
+//------------- Mathematics -------------//
+/// inclusive range checking
+static inline bool is_in_range(uint32_t lower, uint32_t value, uint32_t upper) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline bool is_in_range(uint32_t lower, uint32_t value, uint32_t upper)
+{
+ return (lower <= value) && (value <= upper);
+}
+
+/// exclusive range checking
+static inline bool is_in_range_exclusive(uint32_t lower, uint32_t value, uint32_t upper) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline bool is_in_range_exclusive(uint32_t lower, uint32_t value, uint32_t upper)
+{
+ return (lower < value) && (value < upper);
+}
+
+static inline uint8_t log2_of(uint32_t value) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline uint8_t log2_of(uint32_t value)
+{
+ uint8_t result = 0; // log2 of a value is its MSB's position
+
+ while (value >>= 1)
+ {
+ result++;
+ }
+ return result;
+}
+
+// return the number of set bits in value
+static inline uint8_t cardinality_of(uint32_t value) ATTR_ALWAYS_INLINE ATTR_CONST;
+static inline uint8_t cardinality_of(uint32_t value)
+{
+ // Brian Kernighan's method goes through as many iterations as there are set bits. So if we have a 32-bit word with only
+ // the high bit set, then it will only go once through the loop
+ // Published in 1988, the C Programming Language 2nd Ed. (by Brian W. Kernighan and Dennis M. Ritchie)
+ // mentions this in exercise 2-9. On April 19, 2006 Don Knuth pointed out to me that this method
+ // "was first published by Peter Wegner in CACM 3 (1960), 322. (Also discovered independently by Derrick Lehmer and
+ // published in 1964 in a book edited by Beckenbach.)"
+ uint8_t count;
+ for (count = 0; value; count++)
+ {
+ value &= value - 1; // clear the least significant bit set
+ }
+
+ return count;
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _COMMON_H_ */
+
+/** @} */
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/common/compiler.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/common/compiler.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,152 @@
+/**************************************************************************/
+/*!
+ @file compiler.h
+ @author hathach (tinyusb.org)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2013, K. Townsend (microBuilder.eu)
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+/** \file
+ * \brief GCC Header
+ */
+
+/** \ingroup Group_Compiler
+ * \defgroup Group_GCC GNU GCC
+ * @{
+ */
+
+#ifndef _COMPILER_GCC_H_
+#define _COMPILER_GCC_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "projectconfig.h"
+
+//#ifndef __GNUC__
+// #define ATTR_ALWAYS_INLINE
+// #define ATTR_CONST
+//#else
+
+#ifdef _TEST_
+ #define ATTR_ALWAYS_INLINE
+ #define STATIC_
+ #define INLINE_
+#else
+ #define STATIC_ static
+ #define INLINE_ inline
+
+ #if CFG_DEBUG == 3
+ #define ATTR_ALWAYS_INLINE // no inline for debug = 3
+ #endif
+#endif
+
+#define ALIGN_OF(x) __alignof__(x)
+
+/// Normally, the compiler places the objects it generates in sections like data or bss & function in text. Sometimes, however, you need additional sections, or you need certain particular variables to appear in special sections, for example to map to special hardware. The section attribute specifies that a variable (or function) lives in a particular section
+#define ATTR_SECTION(section) __attribute__ ((#section))
+
+/// If this attribute is used on a function declaration and a call to such a function is not eliminated through dead code elimination or other optimizations, an error that includes message is diagnosed. This is useful for compile-time checking
+#define ATTR_ERROR(Message) __attribute__ ((error(Message)))
+
+/// If this attribute is used on a function declaration and a call to such a function is not eliminated through dead code elimination or other optimizations, a warning that includes message is diagnosed. This is useful for compile-time checking
+#define ATTR_WARNING(Message) __attribute__ ((warning(Message)))
+
+/**
+ * \defgroup Group_VariableAttr Variable Attributes
+ * @{
+ */
+
+/// This attribute specifies a minimum alignment for the variable or structure field, measured in bytes
+#define ATTR_ALIGNED(Bytes) __attribute__ ((aligned(Bytes)))
+
+/// The packed attribute specifies that a variable or structure field should have the smallest possible alignmentâone byte for a variable, and one bit for a field, unless you specify a larger value with the aligned attribute
+#define ATTR_PACKED __attribute__ ((packed))
+
+#define ATTR_PREPACKED
+
+#define ATTR_PACKED_STRUCT(x) x __attribute__ ((packed))
+/** @} */
+
+/**
+ * \defgroup Group_FuncAttr Function Attributes
+ * @{
+ */
+
+#ifndef ATTR_ALWAYS_INLINE
+/// Generally, functions are not inlined unless optimization is specified. For functions declared inline, this attribute inlines the function even if no optimization level is specified
+#define ATTR_ALWAYS_INLINE __attribute__ ((always_inline))
+#endif
+
+/// The nonnull attribute specifies that some function parameters should be non-null pointers. f the compiler determines that a null pointer is passed in an argument slot marked as non-null, and the -Wnonnull option is enabled, a warning is issued. All pointer arguments are marked as non-null
+#define ATTR_NON_NULL __attribute__ ((nonull))
+
+/// Many functions have no effects except the return value and their return value depends only on the parameters and/or global variables. Such a function can be subject to common subexpression elimination and loop optimization just as an arithmetic operator would be. These functions should be declared with the attribute pure
+#define ATTR_PURE __attribute__ ((pure))
+
+/// Many functions do not examine any values except their arguments, and have no effects except the return value. Basically this is just slightly more strict class than the pure attribute below, since function is not allowed to read global memory.
+/// Note that a function that has pointer arguments and examines the data pointed to must not be declared const. Likewise, a function that calls a non-const function usually must not be const. It does not make sense for a const function to return void
+#define ATTR_CONST __attribute__ ((const))
+
+/// The deprecated attribute results in a warning if the function is used anywhere in the source file. This is useful when identifying functions that are expected to be removed in a future version of a program. The warning also includes the location of the declaration of the deprecated function, to enable users to easily find further information about why the function is deprecated, or what they should do instead. Note that the warnings only occurs for uses
+#define ATTR_DEPRECATED __attribute__ ((deprecated))
+
+/// Same as the deprecated attribute with optional message in the warning
+#define ATTR_DEPRECATED_MESS(mess) __attribute__ ((deprecated(mess)))
+
+/// The weak attribute causes the declaration to be emitted as a weak symbol rather than a global. This is primarily useful in defining library functions that can be overridden in user code
+#define ATTR_WEAK __attribute__ ((weak))
+
+/// The alias attribute causes the declaration to be emitted as an alias for another symbol, which must be specified
+#define ATTR_ALIAS(func) __attribute__ ((alias(#func)))
+
+/// The weakref attribute marks a declaration as a weak reference. It is equivalent with weak + alias attribute, but require function is static
+#define ATTR_WEAKREF(func) __attribute__ ((weakref(#func)))
+
+/// The warn_unused_result attribute causes a warning to be emitted if a caller of the function with this attribute does not use its return value. This is useful for functions where not checking the result is either a security problem or always a bug
+#define ATTR_WARN_UNUSED_RESULT __attribute__ ((warn_unused_result))
+
+/// This attribute, attached to a function, means that code must be emitted for the function even if it appears that the function is not referenced. This is useful, for example, when the function is referenced only in inline assembly.
+#define ATTR_USED __attribute__ ((used))
+
+/// This attribute, attached to a function, means that the function is meant to be possibly unused. GCC does not produce a warning for this function.
+#define ATTR_UNUSED __attribute__ ((unused))
+
+/** @} */
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _COMPILER_GCC_H_ */
+
+/// @}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nRF51822n.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nRF51822n.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,89 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "mbed.h"
+#include "nRF51822n.h"
+
+#include "btle/btle.h"
+
+/**************************************************************************/
+/*!
+ @brief Constructor
+*/
+/**************************************************************************/
+nRF51822n::nRF51822n(void)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Destructor
+*/
+/**************************************************************************/
+nRF51822n::~nRF51822n(void)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises anything required to start using BLE
+
+ @returns ble_error_t
+
+ @retval BLE_ERROR_NONE
+ Everything executed properly
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+ble_error_t nRF51822n::init(void)
+{
+ /* ToDo: Clear memory contents, reset the SD, etc. */
+ btle_init();
+
+ return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Resets the BLE HW, removing any existing services and
+ characteristics
+
+ @returns ble_error_t
+
+ @retval BLE_ERROR_NONE
+ Everything executed properly
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+ble_error_t nRF51822n::reset(void)
+{
+ wait(0.5);
+
+ /* Wait for the radio to come back up */
+ wait(1);
+
+ return BLE_ERROR_NONE;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nRF51822n.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nRF51822n.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __NRF51822_H__
+#define __NRF51822_H__
+
+#define NRF51
+#define DEBUG_NRF_USER
+#define BLE_STACK_SUPPORT_REQD
+#define BOARD_PCA10001
+
+#include "mbed.h"
+#include "blecommon.h"
+#include "hw/BLEDevice.h"
+#include "hw/nRF51822n/nRF51Gap.h"
+#include "hw/nRF51822n/nRF51GattServer.h"
+
+/**************************************************************************/
+/*!
+ \brief
+
+*/
+/**************************************************************************/
+class nRF51822n : public BLEDevice
+{
+ public:
+ nRF51822n(void);
+ virtual ~nRF51822n(void);
+
+ virtual Gap& getGap() { return nRF51Gap::getInstance(); };
+ virtual GattServer& getGattServer() { return nRF51GattServer::getInstance(); };
+ virtual ble_error_t init(void);
+ virtual ble_error_t reset(void);
+};
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nRF51Gap.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nRF51Gap.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,234 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "nRF51Gap.h"
+#include "mbed.h"
+
+#include "common/common.h"
+#include "ble_advdata.h"
+
+/**************************************************************************/
+/*!
+ @brief Sets the advertising parameters and payload for the device
+
+ @param[in] params
+ Basic advertising details, including the advertising
+ delay, timeout and how the device should be advertised
+ @params[in] advData
+ The primary advertising data payload
+ @params[in] scanResponse
+ The optional Scan Response payload if the advertising
+ type is set to \ref GapAdvertisingParams::ADV_SCANNABLE_UNDIRECTED
+ in \ref GapAdveritinngParams
+
+ @returns \ref ble_error_t
+
+ @retval BLE_ERROR_NONE
+ Everything executed properly
+
+ @retval BLE_ERROR_BUFFER_OVERFLOW
+ The proposed action would cause a buffer overflow. All
+ advertising payloads must be <= 31 bytes, for example.
+
+ @retval BLE_ERROR_NOT_IMPLEMENTED
+ A feature was requested that is not yet supported in the
+ nRF51 firmware or hardware.
+
+ @retval BLE_ERROR_PARAM_OUT_OF_RANGE
+ One of the proposed values is outside the valid range.
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+ble_error_t nRF51Gap::setAdvertisingData(GapAdvertisingData & advData, GapAdvertisingData & scanResponse)
+{
+ /* Make sure we don't exceed the advertising payload length */
+ if (advData.getPayloadLen() > GAP_ADVERTISING_DATA_MAX_PAYLOAD)
+ {
+ return BLE_ERROR_BUFFER_OVERFLOW;
+ }
+
+ /* Make sure we have a payload! */
+ if (advData.getPayloadLen() == 0)
+ {
+ return BLE_ERROR_PARAM_OUT_OF_RANGE;
+ }
+
+ /* Check the scan response payload limits */
+ //if ((params.getAdvertisingType() == GapAdvertisingParams::ADV_SCANNABLE_UNDIRECTED))
+ //{
+ // /* Check if we're within the upper limit */
+ // if (advData.getPayloadLen() > GAP_ADVERTISING_DATA_MAX_PAYLOAD)
+ // {
+ // return BLE_ERROR_BUFFER_OVERFLOW;
+ // }
+ // /* Make sure we have a payload! */
+ // if (advData.getPayloadLen() == 0)
+ // {
+ // return BLE_ERROR_PARAM_OUT_OF_RANGE;
+ // }
+ //}
+
+ /* Send advertising data! */
+ ASSERT( ERROR_NONE == sd_ble_gap_adv_data_set(advData.getPayload(), advData.getPayloadLen(),
+ scanResponse.getPayload(), scanResponse.getPayloadLen()), BLE_ERROR_PARAM_OUT_OF_RANGE);
+
+ /* Make sure the GAP Service appearance value is aligned with the appearance from GapAdvertisingData */
+ ASSERT( ERROR_NONE == sd_ble_gap_appearance_set(advData.getAppearance()), BLE_ERROR_PARAM_OUT_OF_RANGE);
+
+ /* ToDo: Perform some checks on the payload, for example the Scan Response can't */
+ /* contains a flags AD type, etc. */
+
+ return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Starts the BLE HW, initialising any services that were
+ added before this function was called.
+
+ @note All services must be added before calling this function!
+
+ @returns ble_error_t
+
+ @retval BLE_ERROR_NONE
+ Everything executed properly
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+ble_error_t nRF51Gap::startAdvertising(GapAdvertisingParams & params)
+{
+ /* Make sure we support the advertising type */
+ if (params.getAdvertisingType() == GapAdvertisingParams::ADV_CONNECTABLE_DIRECTED)
+ {
+ /* ToDo: This requires a propery security implementation, etc. */
+ return BLE_ERROR_NOT_IMPLEMENTED;
+ }
+
+ /* Check interval range */
+ if (params.getAdvertisingType() == GapAdvertisingParams::ADV_NON_CONNECTABLE_UNDIRECTED)
+ {
+ /* Min delay is slightly longer for unconnectable devices */
+ if ((params.getInterval() < GAP_ADV_PARAMS_INTERVAL_MIN_NONCON) ||
+ (params.getInterval() > GAP_ADV_PARAMS_INTERVAL_MAX))
+ {
+ return BLE_ERROR_PARAM_OUT_OF_RANGE;
+ }
+ }
+ else
+ {
+ if ((params.getInterval() < GAP_ADV_PARAMS_INTERVAL_MIN) ||
+ (params.getInterval() > GAP_ADV_PARAMS_INTERVAL_MAX))
+ {
+ return BLE_ERROR_PARAM_OUT_OF_RANGE;
+ }
+ }
+
+ /* Check timeout is zero for Connectable Directed */
+ if ((params.getAdvertisingType() == GapAdvertisingParams::ADV_CONNECTABLE_DIRECTED) &&
+ (params.getTimeout() != 0))
+ {
+ /* Timeout must be 0 with this type, although we'll never get here */
+ /* since this isn't implemented yet anyway */
+ return BLE_ERROR_PARAM_OUT_OF_RANGE;
+ }
+
+ /* Check timeout for other advertising types */
+ if ((params.getAdvertisingType() != GapAdvertisingParams::ADV_CONNECTABLE_DIRECTED) &&
+ (params.getTimeout() > GAP_ADV_PARAMS_TIMEOUT_MAX))
+ {
+ return BLE_ERROR_PARAM_OUT_OF_RANGE;
+ }
+
+ /* ToDo: Start Advertising */
+ ble_gap_adv_params_t adv_para = { 0 };
+
+ adv_para.type = params.getAdvertisingType() ;
+ adv_para.p_peer_addr = NULL ; // Undirected advertisement
+ adv_para.fp = BLE_GAP_ADV_FP_ANY ;
+ adv_para.p_whitelist = NULL ;
+ adv_para.interval = params.getInterval() ; // advertising interval (in units of 0.625 ms)
+ adv_para.timeout = params.getTimeout() ;
+
+ ASSERT( ERROR_NONE == sd_ble_gap_adv_start(&adv_para), BLE_ERROR_PARAM_OUT_OF_RANGE);
+
+ state.advertising = 1;
+
+ return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Stops the BLE HW and disconnects from any devices
+
+ @returns ble_error_t
+
+ @retval BLE_ERROR_NONE
+ Everything executed properly
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+ble_error_t nRF51Gap::stopAdvertising(void)
+{
+ /* ToDo: Stop Advertising */
+
+ /* ToDo: Check response */
+ wait(0.1);
+
+ state.advertising = 0;
+
+ return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Disconnects if we are connected to a central device
+
+ @returns ble_error_t
+
+ @retval BLE_ERROR_NONE
+ Everything executed properly
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+ble_error_t nRF51Gap::disconnect(void)
+{
+ /* ToDo: Disconnect if we are connected to a central device */
+
+ state.advertising = 0;
+ state.connected = 0;
+
+ return BLE_ERROR_NONE;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nRF51Gap.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nRF51Gap.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,53 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __NRF51822_GAP_H__
+#define __NRF51822_GAP_H__
+
+#include "mbed.h"
+#include "blecommon.h"
+#include "GapAdvertisingParams.h"
+#include "GapAdvertisingData.h"
+#include "hw/Gap.h"
+
+/**************************************************************************/
+/*!
+ \brief
+
+*/
+/**************************************************************************/
+class nRF51Gap : public Gap
+{
+ public:
+ static nRF51Gap& getInstance()
+ {
+ static nRF51Gap m_instance;
+ return m_instance;
+ }
+
+ /* Functions that must be implemented from Gap */
+ virtual ble_error_t setAdvertisingData(GapAdvertisingData &, GapAdvertisingData &);
+ virtual ble_error_t startAdvertising(GapAdvertisingParams &);
+ virtual ble_error_t stopAdvertising(void);
+ virtual ble_error_t disconnect(void);
+
+ private:
+ nRF51Gap() { };
+ nRF51Gap(nRF51Gap const&);
+ void operator=(nRF51Gap const&);
+};
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nRF51GattServer.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nRF51GattServer.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,231 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "nRF51GattServer.h"
+#include "mbed.h"
+
+#include "common/common.h"
+#include "btle/custom/custom_helper.h"
+
+/**************************************************************************/
+/*!
+ @brief Adds a new service to the GATT table on the peripheral
+
+ @returns ble_error_t
+
+ @retval BLE_ERROR_NONE
+ Everything executed properly
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+ble_error_t nRF51GattServer::addService(GattService & service)
+{
+ /* ToDo: Make sure we don't overflow the array, etc. */
+ /* ToDo: Make sure this service UUID doesn't already exist (?) */
+ /* ToDo: Basic validation */
+
+ /* Add the service to the nRF51 */
+ ble_uuid_t uuid;
+
+ if (service.primaryServiceID.type == UUID::UUID_TYPE_SHORT)
+ {
+ /* 16-bit BLE UUID */
+ uuid.type = BLE_UUID_TYPE_BLE;
+ }
+ else
+ {
+ /* 128-bit Custom UUID */
+ uuid.type = custom_add_uuid_base( service.primaryServiceID.base );
+ }
+
+ uuid.uuid = service.primaryServiceID.value;
+
+ ASSERT( ERROR_NONE == sd_ble_gatts_service_add(BLE_GATTS_SRVC_TYPE_PRIMARY, &uuid, &service.handle), BLE_ERROR_PARAM_OUT_OF_RANGE );
+
+ /* Add characteristics to the service */
+ for (uint8_t i = 0; i < service.characteristicCount; i++)
+ {
+ GattCharacteristic * p_char = service.characteristics[i];
+
+ uuid.uuid = p_char->uuid;
+ ASSERT ( ERROR_NONE == custom_add_in_characteristic(service.handle, &uuid, p_char->properties,
+ NULL, p_char->lenMin, p_char->lenMax, &nrfCharacteristicHandles[characteristicCount]), BLE_ERROR_PARAM_OUT_OF_RANGE );
+
+ /* Update the characteristic handle */
+ p_char->handle = characteristicCount;
+ p_characteristics[characteristicCount++] = p_char;
+ }
+
+ serviceCount++;
+
+ return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads the value of a characteristic, based on the service
+ and characteristic index fields
+
+ @param[in] charHandle
+ The handle of the GattCharacteristic to read from
+ @param[in] buffer
+ Buffer to hold the the characteristic's value
+ (raw byte array in LSB format)
+ @param[in] len
+ The number of bytes read into the buffer
+
+ @returns ble_error_t
+
+ @retval BLE_ERROR_NONE
+ Everything executed properly
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+ble_error_t nRF51GattServer::readValue(uint16_t charHandle, uint8_t buffer[], uint16_t len)
+{
+ ASSERT( ERROR_NONE == sd_ble_gatts_value_get(nrfCharacteristicHandles[charHandle].value_handle, 0, &len, buffer), BLE_ERROR_PARAM_OUT_OF_RANGE);
+
+ return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Updates the value of a characteristic, based on the service
+ and characteristic index fields
+
+ @param[in] charHandle
+ The handle of the GattCharacteristic to write to
+ @param[in] buffer
+ Data to use when updating the characteristic's value
+ (raw byte array in LSB format)
+ @param[in] len
+ The number of bytes in buffer
+
+ @returns ble_error_t
+
+ @retval BLE_ERROR_NONE
+ Everything executed properly
+
+ @section EXAMPLE
+
+ @code
+
+ @endcode
+*/
+/**************************************************************************/
+ble_error_t nRF51GattServer::updateValue(uint16_t charHandle, uint8_t buffer[], uint16_t len)
+{
+ if ((p_characteristics[charHandle]->properties & (GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY)) &&
+ (m_connectionHandle != BLE_CONN_HANDLE_INVALID) )
+ {
+ /* HVX update for the characteristic value */
+ ble_gatts_hvx_params_t hvx_params;
+
+ hvx_params.handle = nrfCharacteristicHandles[charHandle].value_handle;
+ hvx_params.type = (p_characteristics[charHandle]->properties & GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY) ? BLE_GATT_HVX_NOTIFICATION : BLE_GATT_HVX_INDICATION;
+ hvx_params.offset = 0;
+ hvx_params.p_data = buffer;
+ hvx_params.p_len = &len;
+
+ error_t error = (error_t) sd_ble_gatts_hvx(m_connectionHandle, &hvx_params);
+
+ /* ERROR_INVALID_STATE, ERROR_BUSY, ERROR_GATTS_SYS_ATTR_MISSING and ERROR_NO_TX_BUFFERS the ATT table has been updated. */
+ if ( (error != ERROR_NONE ) && (error != ERROR_INVALID_STATE) &&
+ (error != ERROR_BLE_NO_TX_BUFFERS ) && (error != ERROR_BUSY ) &&
+ (error != ERROR_BLEGATTS_SYS_ATTR_MISSING ) )
+ {
+ ASSERT_INT( ERROR_NONE, sd_ble_gatts_value_set(nrfCharacteristicHandles[charHandle].value_handle, 0, &len, buffer), BLE_ERROR_PARAM_OUT_OF_RANGE );
+ }
+ } else
+ {
+ ASSERT_INT( ERROR_NONE, sd_ble_gatts_value_set(nrfCharacteristicHandles[charHandle].value_handle, 0, &len, buffer), BLE_ERROR_PARAM_OUT_OF_RANGE );
+ }
+
+ return BLE_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Callback handler for events getting pushed up from the SD
+*/
+/**************************************************************************/
+void nRF51GattServer::hwCallback(ble_evt_t * p_ble_evt)
+{
+ uint16_t handle_value;
+ GattServerEvents::gattEvent_t event;
+
+ switch (p_ble_evt->header.evt_id)
+ {
+ case BLE_GATTS_EVT_WRITE:
+ /* There are 2 use case here: Values being updated & CCCD (indicate/notify) enabled */
+
+ /* 1.) Handle CCCD changes */
+ handle_value = p_ble_evt->evt.gatts_evt.params.write.handle;
+ for(uint8_t i=0; i<characteristicCount; i++)
+ {
+ if ( (p_characteristics[i]->properties & (GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE | GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY)) &&
+ (nrfCharacteristicHandles[i].cccd_handle == handle_value) )
+ {
+ uint16_t cccd_value = (p_ble_evt->evt.gatts_evt.params.write.data[1] << 8) | p_ble_evt->evt.gatts_evt.params.write.data[0]; /* Little Endian but M0 may be mis-aligned */
+
+ if ( ((p_characteristics[i]->properties & GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE) && (cccd_value & BLE_GATT_HVX_INDICATION )) ||
+ ((p_characteristics[i]->properties & GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY ) && (cccd_value & BLE_GATT_HVX_NOTIFICATION)))
+ {
+ event = GattServerEvents::GATT_EVENT_UPDATES_ENABLED;
+ } else
+ {
+ event = GattServerEvents::GATT_EVENT_UPDATES_DISABLED;
+ }
+
+ handleEvent(event, i);
+ return;
+ }
+ }
+
+ /* 2.) Changes to the characteristic value will be handled with other events below */
+ event = GattServerEvents::GATT_EVENT_DATA_WRITTEN;
+ break;
+
+ case BLE_GATTS_EVT_HVC:
+ /* Indication confirmation received */
+ event = GattServerEvents::GATT_EVENT_CONFIRMATION_RECEIVED;
+ handle_value = p_ble_evt->evt.gatts_evt.params.hvc.handle;
+ break;
+
+ default:
+ return;
+ }
+
+ /* Find index (charHandle) in the pool */
+ for(uint8_t i=0; i<characteristicCount; i++)
+ {
+ if (nrfCharacteristicHandles[i].value_handle == handle_value)
+ {
+ handleEvent(event, i);
+ break;
+ }
+ }
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nRF51GattServer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nRF51GattServer.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,64 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __NRF51822_GATT_SERVER_H__
+#define __NRF51822_GATT_SERVER_H__
+
+#include "mbed.h"
+#include "blecommon.h"
+#include "ble.h" /* nordic ble */
+#include "GattService.h"
+#include "hw/GattServer.h"
+
+#define BLE_TOTAL_CHARACTERISTICS 10
+
+/**************************************************************************/
+/*!
+ \brief
+
+*/
+/**************************************************************************/
+class nRF51GattServer : public GattServer
+{
+ public:
+ static nRF51GattServer& getInstance()
+ {
+ static nRF51GattServer m_instance;
+ return m_instance;
+ }
+
+ /* Functions that must be implemented from GattServer */
+ virtual ble_error_t addService(GattService &);
+ virtual ble_error_t readValue(uint16_t, uint8_t[], uint16_t);
+ virtual ble_error_t updateValue(uint16_t, uint8_t[], uint16_t);
+
+ /* nRF51 Functions */
+ void eventCallback(void);
+ void hwCallback(ble_evt_t * p_ble_evt);
+
+ uint16_t m_connectionHandle; // TODO move to private
+
+ private:
+ GattCharacteristic* p_characteristics[BLE_TOTAL_CHARACTERISTICS];
+ ble_gatts_char_handles_t nrfCharacteristicHandles[BLE_TOTAL_CHARACTERISTICS];
+
+ nRF51GattServer() { serviceCount = 0; characteristicCount = 0; m_connectionHandle = BLE_CONN_HANDLE_INVALID; };
+
+ nRF51GattServer(nRF51GattServer const&);
+ void operator=(nRF51GattServer const&);
+};
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/app_common/app_timer.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/app_common/app_timer.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,1130 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+#include "app_timer.h"
+#include <stdlib.h>
+#include "nrf51.h"
+#include "nrf51_bitfields.h"
+#include "nrf_soc.h"
+#include "app_error.h"
+//#include "nrf_delay.h"
+#include "mbed.h"
+#include "app_util.h"
+
+
+#define RTC1_IRQ_PRI APP_IRQ_PRIORITY_LOW /**< Priority of the RTC1 interrupt (used for checking for timeouts and executing timeout handlers). */
+#define SWI0_IRQ_PRI APP_IRQ_PRIORITY_LOW /**< Priority of the SWI0 interrupt (used for updating the timer list). */
+
+// The current design assumes that both interrupt handlers run at the same interrupt level.
+// If this is to be changed, protection must be added to prevent them from interrupting each other
+// (e.g. by using guard/trigger flags).
+STATIC_ASSERT(RTC1_IRQ_PRI == SWI0_IRQ_PRI);
+
+#define MAX_RTC_COUNTER_VAL 0x00FFFFFF /**< Maximum value of the RTC counter. */
+
+#define APP_HIGH_USER_ID 0 /**< User Id for the Application High "user". */
+#define APP_LOW_USER_ID 1 /**< User Id for the Application Low "user". */
+#define THREAD_MODE_USER_ID 2 /**< User Id for the Thread Mode "user". */
+
+#define RTC_COMPARE_OFFSET_MIN 3 /**< Minimum offset between the current RTC counter value and the Capture Compare register. Although the nRF51 Series User Specification recommends this value to be 2, we use 3 to be safer.*/
+
+#define MAX_RTC_TASKS_DELAY 47 /**< Maximum delay until an RTC task is executed. */
+
+/**@brief Timer allocation state type. */
+typedef enum
+{
+ STATE_FREE, /**< The timer node is available. */
+ STATE_ALLOCATED /**< The timer node has been allocated. */
+} timer_alloc_state_t;
+
+/**@brief Timer node type. The nodes will be used form a linked list of running timers. */
+typedef struct
+{
+ timer_alloc_state_t state; /**< Timer allocation state. */
+ app_timer_mode_t mode; /**< Timer mode. */
+ uint32_t ticks_to_expire; /**< Number of ticks from previous timer interrupt to timer expiry. */
+ uint32_t ticks_at_start; /**< Current RTC counter value when the timer was started. */
+ uint32_t ticks_first_interval; /**< Number of ticks in the first timer interval. */
+ uint32_t ticks_periodic_interval; /**< Timer period (for repeating timers). */
+ bool is_running; /**< True if timer is running, False otherwise. */
+ app_timer_timeout_handler_t p_timeout_handler; /**< Pointer to function to be executed when the timer expires. */
+ void * p_context; /**< General purpose pointer. Will be passed to the timeout handler when the timer expires. */
+ app_timer_id_t next; /**< Id of next timer in list of running timers. */
+} timer_node_t;
+
+STATIC_ASSERT(sizeof(timer_node_t) <= APP_TIMER_NODE_SIZE);
+STATIC_ASSERT(sizeof(timer_node_t) % 4 == 0);
+
+/**@brief Set of available timer operation types. */
+typedef enum
+{
+ TIMER_USER_OP_TYPE_NONE, /**< Invalid timer operation type. */
+ TIMER_USER_OP_TYPE_START, /**< Timer operation type Start. */
+ TIMER_USER_OP_TYPE_STOP, /**< Timer operation type Stop. */
+ TIMER_USER_OP_TYPE_STOP_ALL /**< Timer operation type Stop All. */
+} timer_user_op_type_t;
+
+/**@brief Structure describing a timer start operation. */
+typedef struct
+{
+ uint32_t ticks_at_start; /**< Current RTC counter value when the timer was started. */
+ uint32_t ticks_first_interval; /**< Number of ticks in the first timer interval. */
+ uint32_t ticks_periodic_interval; /**< Timer period (for repeating timers). */
+ void * p_context; /**< General purpose pointer. Will be passed to the timeout handler when the timer expires. */
+} timer_user_op_start_t;
+
+/**@brief Structure describing a timer operation. */
+typedef struct
+{
+ timer_user_op_type_t op_type; /**< Timer operation type. */
+ app_timer_id_t timer_id; /**< Id of timer on which the operation is to be performed. */
+ union
+ {
+ timer_user_op_start_t start; /**< Structure describing a timer start operation. */
+ } params;
+} timer_user_op_t;
+
+STATIC_ASSERT(sizeof(timer_user_op_t) <= APP_TIMER_USER_OP_SIZE);
+STATIC_ASSERT(sizeof(timer_user_op_t) % 4 == 0);
+
+/**@brief Structure describing a timer user.
+ *
+ * @details For each user of the timer module, there will be a timer operations queue. This queue
+ * will hold timer operations issued by this user until the timer interrupt handler
+ * processes these operations. For the current implementation, there will be one user for
+ * each interrupt level available to the application (APP_HIGH, APP_LOW and THREAD_MODE),
+ * but the module can easily be modified to e.g. have one queue per process when using an
+ * RTOS. The purpose of the queues is to be able to have a completely lockless timer
+ * implementation.
+ */
+typedef struct
+{
+ uint8_t first; /**< Index of first entry to have been inserted in the queue (i.e. the next entry to be executed). */
+ uint8_t last; /**< Index of last entry to have been inserted in the queue. */
+ uint8_t user_op_queue_size; /**< Queue size. */
+ timer_user_op_t * p_user_op_queue; /**< Queue buffer. */
+} timer_user_t;
+
+STATIC_ASSERT(sizeof(timer_user_t) == APP_TIMER_USER_SIZE);
+STATIC_ASSERT(sizeof(timer_user_t) % 4 == 0);
+
+/**@brief User id type.
+ *
+ * @details In the current implementation, this will automatically be generated from the current
+ * interrupt level.
+ */
+typedef uint32_t timer_user_id_t;
+
+#define TIMER_NULL ((app_timer_id_t)(0 - 1)) /**< Invalid timer id. */
+#define CONTEXT_QUEUE_SIZE_MAX (2) /**< Timer internal elapsed ticks queue size. */
+
+static uint8_t m_node_array_size; /**< Size of timer node array. */
+static timer_node_t * mp_nodes = NULL; /**< Array of timer nodes. */
+static uint8_t m_user_array_size; /**< Size of timer user array. */
+static timer_user_t * mp_users; /**< Array of timer users. */
+static app_timer_id_t m_timer_id_head; /**< First timer in list of running timers. */
+static uint32_t m_ticks_latest; /**< Last known RTC counter value. */
+static uint32_t m_ticks_elapsed[CONTEXT_QUEUE_SIZE_MAX]; /**< Timer internal elapsed ticks queue. */
+static uint8_t m_ticks_elapsed_q_read_ind; /**< Timer internal elapsed ticks queue read index. */
+static uint8_t m_ticks_elapsed_q_write_ind; /**< Timer internal elapsed ticks queue write index. */
+static app_timer_evt_schedule_func_t m_evt_schedule_func; /**< Pointer to function for propagating timeout events to the scheduler. */
+
+
+/**@brief Function for initializing the RTC1 counter.
+ *
+ * @param[in] prescaler Value of the RTC1 PRESCALER register. Set to 0 for no prescaling.
+ */
+static void rtc1_init(uint32_t prescaler)
+{
+ NRF_RTC1->PRESCALER = prescaler;
+ NVIC_SetPriority(RTC1_IRQn, RTC1_IRQ_PRI);
+}
+
+
+/**@brief Function for starting the RTC1 timer.
+ */
+static void rtc1_start(void)
+{
+ NRF_RTC1->EVTENSET = RTC_EVTEN_COMPARE0_Msk;
+ NRF_RTC1->INTENSET = RTC_INTENSET_COMPARE0_Msk;
+
+ NVIC_ClearPendingIRQ(RTC1_IRQn);
+ NVIC_EnableIRQ(RTC1_IRQn);
+
+ NRF_RTC1->TASKS_START = 1;
+ wait(0.0000001 * MAX_RTC_TASKS_DELAY);
+}
+
+
+/**@brief Function for stopping the RTC1 timer.
+ */
+static void rtc1_stop(void)
+{
+ NVIC_DisableIRQ(RTC1_IRQn);
+
+ NRF_RTC1->EVTENCLR = RTC_EVTEN_COMPARE0_Msk;
+ NRF_RTC1->INTENCLR = RTC_INTENSET_COMPARE0_Msk;
+
+ NRF_RTC1->TASKS_STOP = 1;
+ wait(0.0000001 * MAX_RTC_TASKS_DELAY);
+}
+
+
+/**@brief Function for returning the current value of the RTC1 counter.
+ *
+ * @return Current value of the RTC1 counter.
+ */
+static __INLINE uint32_t rtc1_counter_get(void)
+{
+ return NRF_RTC1->COUNTER;
+}
+
+
+/**@brief Function for computing the difference between two RTC1 counter values.
+ *
+ * @return Number of ticks elapsed from ticks_old to ticks_now.
+ */
+static __INLINE uint32_t ticks_diff_get(uint32_t ticks_now, uint32_t ticks_old)
+{
+ return ((ticks_now - ticks_old) & MAX_RTC_COUNTER_VAL);
+}
+
+
+/**@brief Function for setting the RTC1 Capture Compare register 0, and enabling the corresponding
+ * event.
+ *
+ * @param[in] value New value of Capture Compare register 0.
+ */
+static __INLINE void rtc1_compare0_set(uint32_t value)
+{
+ NRF_RTC1->CC[0] = value;
+}
+
+
+/**@brief Function for inserting a timer in the timer list.
+ *
+ * @param[in] timer_id Id of timer to insert.
+ */
+static void timer_list_insert(app_timer_id_t timer_id)
+{
+ timer_node_t * p_timer = &mp_nodes[timer_id];
+
+ if (m_timer_id_head == TIMER_NULL)
+ {
+ m_timer_id_head = timer_id;
+ }
+ else
+ {
+ if (p_timer->ticks_to_expire <= mp_nodes[m_timer_id_head].ticks_to_expire)
+ {
+ mp_nodes[m_timer_id_head].ticks_to_expire -= p_timer->ticks_to_expire;
+
+ p_timer->next = m_timer_id_head;
+ m_timer_id_head = timer_id;
+ }
+ else
+ {
+ app_timer_id_t previous;
+ app_timer_id_t current;
+ uint32_t ticks_to_expire;
+
+ ticks_to_expire = p_timer->ticks_to_expire;
+ previous = m_timer_id_head;
+ current = m_timer_id_head;
+
+ while ((current != TIMER_NULL) && (ticks_to_expire > mp_nodes[current].ticks_to_expire))
+ {
+ ticks_to_expire -= mp_nodes[current].ticks_to_expire;
+ previous = current;
+ current = mp_nodes[current].next;
+ }
+
+ if (current != TIMER_NULL)
+ {
+ mp_nodes[current].ticks_to_expire -= ticks_to_expire;
+ }
+
+ p_timer->ticks_to_expire = ticks_to_expire;
+ p_timer->next = current;
+ mp_nodes[previous].next = timer_id;
+ }
+ }
+}
+
+
+/**@brief Function for removing a timer from the timer queue.
+ *
+ * @param[in] timer_id Id of timer to remove.
+ */
+static void timer_list_remove(app_timer_id_t timer_id)
+{
+ app_timer_id_t previous;
+ app_timer_id_t current;
+ uint32_t timeout;
+
+ // Find the timer's position in timer list
+ previous = m_timer_id_head;
+ current = previous;
+
+ while (current != TIMER_NULL)
+ {
+ if (current == timer_id)
+ {
+ break;
+ }
+ previous = current;
+ current = mp_nodes[current].next;
+ }
+
+ // Timer not in active list
+ if (current == TIMER_NULL)
+ {
+ return;
+ }
+
+ // Timer is the first in the list
+ if (previous == current)
+ {
+ m_timer_id_head = mp_nodes[m_timer_id_head].next;
+ }
+
+ // Remaining timeout between next timeout
+ timeout = mp_nodes[current].ticks_to_expire;
+
+ // Link previous timer with next of this timer, i.e. removing the timer from list
+ mp_nodes[previous].next = mp_nodes[current].next;
+
+ // If this is not the last timer, increment the next timer by this timer timeout
+ current = mp_nodes[previous].next;
+ if (current != TIMER_NULL)
+ {
+ mp_nodes[current].ticks_to_expire += timeout;
+ }
+}
+
+
+/**@brief Function for scheduling a check for timeouts by generating a RTC1 interrupt.
+ */
+static void timer_timeouts_check_sched(void)
+{
+ NVIC_SetPendingIRQ(RTC1_IRQn);
+}
+
+
+/**@brief Function for scheduling a timer list update by generating a SWI0 interrupt.
+ */
+static void timer_list_handler_sched(void)
+{
+ NVIC_SetPendingIRQ(SWI0_IRQn);
+}
+
+
+/**@brief Function for executing an application timeout handler, either by calling it directly, or
+ * by passing an event to the @ref app_scheduler.
+ *
+ * @param[in] p_timer Pointer to expired timer.
+ */
+static void timeout_handler_exec(timer_node_t * p_timer)
+{
+ if (m_evt_schedule_func != NULL)
+ {
+ uint32_t err_code = m_evt_schedule_func(p_timer->p_timeout_handler, p_timer->p_context);
+ APP_ERROR_CHECK(err_code);
+ }
+ else
+ {
+ p_timer->p_timeout_handler(p_timer->p_context);
+ }
+}
+
+
+/**@brief Function for checking for expired timers.
+ */
+static void timer_timeouts_check(void)
+{
+ // Handle expired of timer
+ if (m_timer_id_head != TIMER_NULL)
+ {
+ app_timer_id_t timer_id;
+ uint32_t ticks_elapsed;
+ uint32_t ticks_expired;
+
+ // Initialize actual elapsed ticks being consumed to 0
+ ticks_expired = 0;
+
+ // ticks_elapsed is collected here, job will use it
+ ticks_elapsed = ticks_diff_get(rtc1_counter_get(), m_ticks_latest);
+
+ // Auto variable containing the head of timers expiring
+ timer_id = m_timer_id_head;
+
+ // Expire all timers within ticks_elapsed and collect ticks_expired
+ while (timer_id != TIMER_NULL)
+ {
+ timer_node_t * p_timer;
+
+ // Auto variable for current timer node
+ p_timer = &mp_nodes[timer_id];
+
+ // Do nothing if timer did not expire
+ if (ticks_elapsed < p_timer->ticks_to_expire)
+ {
+ break;
+ }
+
+ // Decrement ticks_elapsed and collect expired ticks
+ ticks_elapsed -= p_timer->ticks_to_expire;
+ ticks_expired += p_timer->ticks_to_expire;
+
+ // Move to next timer
+ timer_id = p_timer->next;
+
+ // Execute Task
+ timeout_handler_exec(p_timer);
+ }
+
+ // Prepare to queue the ticks expired in the m_ticks_elapsed queue.
+ if (m_ticks_elapsed_q_read_ind == m_ticks_elapsed_q_write_ind)
+ {
+ // The read index of the queue is equal to the write index. This means the new
+ // value of ticks_expired should be stored at a new location in the m_ticks_elapsed
+ // queue (which is implemented as a double buffer).
+
+ // Check if there will be a queue overflow.
+ if (++m_ticks_elapsed_q_write_ind == CONTEXT_QUEUE_SIZE_MAX)
+ {
+ // There will be a queue overflow. Hence the write index should point to the start
+ // of the queue.
+ m_ticks_elapsed_q_write_ind = 0;
+ }
+ }
+
+ // Queue the ticks expired.
+ m_ticks_elapsed[m_ticks_elapsed_q_write_ind] = ticks_expired;
+
+ timer_list_handler_sched();
+ }
+}
+
+
+/**@brief Function for acquiring the number of ticks elapsed.
+ *
+ * @param[out] p_ticks_elapsed Number of ticks elapsed.
+ *
+ * @return TRUE if elapsed ticks was read from queue, FALSE otherwise.
+ */
+static bool elapsed_ticks_acquire(uint32_t * p_ticks_elapsed)
+{
+ // Pick the elapsed value from queue
+ if (m_ticks_elapsed_q_read_ind != m_ticks_elapsed_q_write_ind)
+ {
+ // Dequeue elapsed value
+ m_ticks_elapsed_q_read_ind++;
+ if (m_ticks_elapsed_q_read_ind == CONTEXT_QUEUE_SIZE_MAX)
+ {
+ m_ticks_elapsed_q_read_ind = 0;
+ }
+
+ *p_ticks_elapsed = m_ticks_elapsed[m_ticks_elapsed_q_read_ind];
+
+ m_ticks_latest += *p_ticks_elapsed;
+ m_ticks_latest &= MAX_RTC_COUNTER_VAL;
+
+ return true;
+ }
+ else
+ {
+ // No elapsed value in queue
+ *p_ticks_elapsed = 0;
+ return false;
+ }
+}
+
+
+/**@brief Function for handling the timer list deletions.
+ *
+ * @return TRUE if Capture Compare register must be updated, FALSE otherwise.
+ */
+static bool list_deletions_handler(void)
+{
+ app_timer_id_t timer_id_old_head;
+ uint8_t user_id;
+
+ // Remember the old head, so as to decide if new compare needs to be set
+ timer_id_old_head = m_timer_id_head;
+
+ user_id = m_user_array_size;
+ while (user_id--)
+ {
+ timer_user_t * p_user = &mp_users[user_id];
+ uint8_t user_ops_first = p_user->first;
+
+ while (user_ops_first != p_user->last)
+ {
+ timer_node_t * p_timer;
+ timer_user_op_t * p_user_op = &p_user->p_user_op_queue[user_ops_first];
+
+ // Traverse to next operation in queue
+ user_ops_first++;
+ if (user_ops_first == p_user->user_op_queue_size)
+ {
+ user_ops_first = 0;
+ }
+
+ switch (p_user_op->op_type)
+ {
+ case TIMER_USER_OP_TYPE_STOP:
+ // Delete node if timer is running
+ p_timer = &mp_nodes[p_user_op->timer_id];
+ if (p_timer->is_running)
+ {
+ timer_list_remove(p_user_op->timer_id);
+ p_timer->is_running = false;
+ }
+ break;
+
+ case TIMER_USER_OP_TYPE_STOP_ALL:
+ // Delete list of running timers, and mark all timers as not running
+ while (m_timer_id_head != TIMER_NULL)
+ {
+ timer_node_t * p_head = &mp_nodes[m_timer_id_head];
+
+ p_head->is_running = false;
+ m_timer_id_head = p_head->next;
+ }
+ break;
+
+ default:
+ // No implementation needed.
+ break;
+ }
+ }
+ }
+
+ // Detect change in head of the list
+ return (m_timer_id_head != timer_id_old_head);
+}
+
+
+/**@brief Function for updating the timer list for expired timers.
+ *
+ * @param[in] ticks_elapsed Number of elapsed ticks.
+ * @param[in] ticks_previous Previous known value of the RTC counter.
+ * @param[out] p_restart_list_head List of repeating timers to be restarted.
+ */
+static void expired_timers_handler(uint32_t ticks_elapsed,
+ uint32_t ticks_previous,
+ app_timer_id_t * p_restart_list_head)
+{
+ uint32_t ticks_expired = 0;
+
+ while (m_timer_id_head != TIMER_NULL)
+ {
+ timer_node_t * p_timer;
+ app_timer_id_t id_expired;
+
+ // Auto variable for current timer node
+ p_timer = &mp_nodes[m_timer_id_head];
+
+ // Do nothing if timer did not expire
+ if (ticks_elapsed < p_timer->ticks_to_expire)
+ {
+ p_timer->ticks_to_expire -= ticks_elapsed;
+ break;
+ }
+
+ // Decrement ticks_elapsed and collect expired ticks
+ ticks_elapsed -= p_timer->ticks_to_expire;
+ ticks_expired += p_timer->ticks_to_expire;
+
+ // Timer expired, set ticks_to_expire zero
+ p_timer->ticks_to_expire = 0;
+ p_timer->is_running = false;
+
+ // Remove the expired timer from head
+ id_expired = m_timer_id_head;
+ m_timer_id_head = p_timer->next;
+
+ // Timer will be restarted if periodic
+ if (p_timer->ticks_periodic_interval != 0)
+ {
+ p_timer->ticks_at_start = (ticks_previous + ticks_expired) & MAX_RTC_COUNTER_VAL;
+ p_timer->ticks_first_interval = p_timer->ticks_periodic_interval;
+ p_timer->next = *p_restart_list_head;
+ *p_restart_list_head = id_expired;
+ }
+ }
+}
+
+
+/**@brief Function for handling timer list insertions.
+ *
+ * @param[in] p_restart_list_head List of repeating timers to be restarted.
+ *
+ * @return TRUE if Capture Compare register must be updated, FALSE otherwise.
+ */
+static bool list_insertions_handler(app_timer_id_t restart_list_head)
+{
+ app_timer_id_t timer_id_old_head;
+ uint8_t user_id;
+
+ // Remember the old head, so as to decide if new compare needs to be set
+ timer_id_old_head = m_timer_id_head;
+
+ user_id = m_user_array_size;
+ while (user_id--)
+ {
+ timer_user_t * p_user = &mp_users[user_id];
+
+ // Handle insertions of timers
+ while ((restart_list_head != TIMER_NULL) || (p_user->first != p_user->last))
+ {
+ app_timer_id_t id_start;
+ timer_node_t * p_timer;
+
+ if (restart_list_head != TIMER_NULL)
+ {
+ id_start = restart_list_head;
+ p_timer = &mp_nodes[id_start];
+ restart_list_head = p_timer->next;
+ }
+ else
+ {
+ timer_user_op_t * p_user_op = &p_user->p_user_op_queue[p_user->first];
+
+ p_user->first++;
+ if (p_user->first == p_user->user_op_queue_size)
+ {
+ p_user->first = 0;
+ }
+
+ id_start = p_user_op->timer_id;
+ p_timer = &mp_nodes[id_start];
+
+ if ((p_user_op->op_type != TIMER_USER_OP_TYPE_START) || p_timer->is_running)
+ {
+ continue;
+ }
+
+ p_timer->ticks_at_start = p_user_op->params.start.ticks_at_start;
+ p_timer->ticks_first_interval = p_user_op->params.start.ticks_first_interval;
+ p_timer->ticks_periodic_interval = p_user_op->params.start.ticks_periodic_interval;
+ p_timer->p_context = p_user_op->params.start.p_context;
+ }
+
+ // Prepare the node to be inserted
+ if (
+ ((p_timer->ticks_at_start - m_ticks_latest) & MAX_RTC_COUNTER_VAL)
+ <
+ (MAX_RTC_COUNTER_VAL / 2)
+ )
+ {
+ p_timer->ticks_to_expire = ticks_diff_get(p_timer->ticks_at_start, m_ticks_latest) +
+ p_timer->ticks_first_interval;
+ }
+ else
+ {
+ uint32_t delta_current_start;
+
+ delta_current_start = ticks_diff_get(m_ticks_latest, p_timer->ticks_at_start);
+ if (p_timer->ticks_first_interval > delta_current_start)
+ {
+ p_timer->ticks_to_expire = p_timer->ticks_first_interval - delta_current_start;
+ }
+ else
+ {
+ p_timer->ticks_to_expire = 0;
+ }
+ }
+
+ p_timer->ticks_at_start = 0;
+ p_timer->ticks_first_interval = 0;
+ p_timer->is_running = true;
+ p_timer->next = TIMER_NULL;
+
+ // Insert into list
+ timer_list_insert(id_start);
+ }
+ }
+
+ return (m_timer_id_head != timer_id_old_head);
+}
+
+
+/**@brief Function for updating the Capture Compare register.
+ */
+static void compare_reg_update(app_timer_id_t timer_id_head_old)
+{
+ // Setup the timeout for timers on the head of the list
+ if (m_timer_id_head != TIMER_NULL)
+ {
+ uint32_t ticks_to_expire = mp_nodes[m_timer_id_head].ticks_to_expire;
+ uint32_t pre_counter_val = rtc1_counter_get();
+ uint32_t cc = m_ticks_latest;
+ uint32_t ticks_elapsed = ticks_diff_get(pre_counter_val, cc) + RTC_COMPARE_OFFSET_MIN;
+
+ if (timer_id_head_old == TIMER_NULL)
+ {
+ // No timers were already running, start RTC
+ rtc1_start();
+ }
+
+ cc += (ticks_elapsed < ticks_to_expire) ? ticks_to_expire : ticks_elapsed;
+ cc &= MAX_RTC_COUNTER_VAL;
+
+ rtc1_compare0_set(cc);
+
+ uint32_t post_counter_val = rtc1_counter_get();
+
+ if (
+ (ticks_diff_get(post_counter_val, pre_counter_val) + RTC_COMPARE_OFFSET_MIN)
+ >
+ ticks_diff_get(cc, pre_counter_val)
+ )
+ {
+ // When this happens the COMPARE event may not be triggered by the RTC.
+ // The nRF51 Series User Specification states that if the COUNTER value is N
+ // (i.e post_counter_val = N), writing N or N+1 to a CC register may not trigger a
+ // COMPARE event. Hence the RTC interrupt is forcefully pended by calling the following
+ // function.
+ timer_timeouts_check_sched();
+ }
+ }
+ else
+ {
+ // No timers are running, stop RTC
+ rtc1_stop();
+ }
+}
+
+
+/**@brief Function for handling changes to the timer list.
+ */
+static void timer_list_handler(void)
+{
+ app_timer_id_t restart_list_head = TIMER_NULL;
+ uint32_t ticks_elapsed;
+ uint32_t ticks_previous;
+ bool ticks_have_elapsed;
+ bool compare_update;
+ app_timer_id_t timer_id_head_old;
+
+ // Back up the previous known tick and previous list head
+ ticks_previous = m_ticks_latest;
+ timer_id_head_old = m_timer_id_head;
+
+ // Get number of elapsed ticks
+ ticks_have_elapsed = elapsed_ticks_acquire(&ticks_elapsed);
+
+ // Handle list deletions
+ compare_update = list_deletions_handler();
+
+ // Handle expired timers
+ if (ticks_have_elapsed)
+ {
+ expired_timers_handler(ticks_elapsed, ticks_previous, &restart_list_head);
+ compare_update = true;
+ }
+
+ // Handle list insertions
+ if (list_insertions_handler(restart_list_head))
+ {
+ compare_update = true;
+ }
+
+ // Update compare register if necessary
+ if (compare_update)
+ {
+ compare_reg_update(timer_id_head_old);
+ }
+}
+
+
+/**@brief Function for enqueueing a new operations queue entry.
+ *
+ * @param[in] p_user User that the entry is to be enqueued for.
+ * @param[in] last_index Index of the next last index to be enqueued.
+ */
+static void user_op_enque(timer_user_t * p_user, app_timer_id_t last_index)
+{
+ p_user->last = last_index;
+}
+
+
+/**@brief Function for allocating a new operations queue entry.
+ *
+ * @param[in] p_user User that the entry is to be allocated for.
+ * @param[out] p_last_index Index of the next last index to be enqueued.
+ *
+ * @return Pointer to allocated queue entry, or NULL if queue is full.
+ */
+static timer_user_op_t * user_op_alloc(timer_user_t * p_user, app_timer_id_t * p_last_index)
+{
+ app_timer_id_t last;
+ timer_user_op_t * p_user_op;
+
+ last = p_user->last + 1;
+ if (last == p_user->user_op_queue_size)
+ {
+ // Overflow case.
+ last = 0;
+ }
+ if (last == p_user->first)
+ {
+ // Queue is full.
+ return NULL;
+ }
+
+ *p_last_index = last;
+ p_user_op = &p_user->p_user_op_queue[p_user->last];
+
+ return p_user_op;
+}
+
+
+/**@brief Function for scheduling a Timer Start operation.
+ *
+ * @param[in] user_id Id of user calling this function.
+ * @param[in] timer_id Id of timer to start.
+ * @param[in] timeout_initial Time (in ticks) to first timer expiry.
+ * @param[in] timeout_periodic Time (in ticks) between periodic expiries.
+ * @param[in] p_context General purpose pointer. Will be passed to the timeout handler when
+ * the timer expires.
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ */
+static uint32_t timer_start_op_schedule(timer_user_id_t user_id,
+ app_timer_id_t timer_id,
+ uint32_t timeout_initial,
+ uint32_t timeout_periodic,
+ void * p_context)
+{
+ app_timer_id_t last_index;
+
+ timer_user_op_t * p_user_op = user_op_alloc(&mp_users[user_id], &last_index);
+ if (p_user_op == NULL)
+ {
+ return NRF_ERROR_NO_MEM;
+ }
+
+ p_user_op->op_type = TIMER_USER_OP_TYPE_START;
+ p_user_op->timer_id = timer_id;
+ p_user_op->params.start.ticks_at_start = rtc1_counter_get();
+ p_user_op->params.start.ticks_first_interval = timeout_initial;
+ p_user_op->params.start.ticks_periodic_interval = timeout_periodic;
+ p_user_op->params.start.p_context = p_context;
+
+ user_op_enque(&mp_users[user_id], last_index);
+
+ timer_list_handler_sched();
+
+ return NRF_SUCCESS;
+}
+
+
+/**@brief Function for scheduling a Timer Stop operation.
+ *
+ * @param[in] user_id Id of user calling this function.
+ * @param[in] timer_id Id of timer to stop.
+ *
+ * @return NRF_SUCCESS on successful scheduling a timer stop operation. NRF_ERROR_NO_MEM when there
+ * is no memory left to schedule the timer stop operation.
+ */
+static uint32_t timer_stop_op_schedule(timer_user_id_t user_id, app_timer_id_t timer_id)
+{
+ app_timer_id_t last_index;
+
+ timer_user_op_t * p_user_op = user_op_alloc(&mp_users[user_id], &last_index);
+ if (p_user_op == NULL)
+ {
+ return NRF_ERROR_NO_MEM;
+ }
+
+ p_user_op->op_type = TIMER_USER_OP_TYPE_STOP;
+ p_user_op->timer_id = timer_id;
+
+ user_op_enque(&mp_users[user_id], last_index);
+
+ timer_list_handler_sched();
+
+ return NRF_SUCCESS;
+}
+
+
+/**@brief Function for scheduling a Timer Stop All operation.
+ *
+ * @param[in] user_id Id of user calling this function.
+ */
+static uint32_t timer_stop_all_op_schedule(timer_user_id_t user_id)
+{
+ app_timer_id_t last_index;
+
+ timer_user_op_t * p_user_op = user_op_alloc(&mp_users[user_id], &last_index);
+ if (p_user_op == NULL)
+ {
+ return NRF_ERROR_NO_MEM;
+ }
+
+ p_user_op->op_type = TIMER_USER_OP_TYPE_STOP_ALL;
+ p_user_op->timer_id = TIMER_NULL;
+
+ user_op_enque(&mp_users[user_id], last_index);
+
+ timer_list_handler_sched();
+
+ return NRF_SUCCESS;
+}
+
+
+/**@brief Function for handling the RTC1 interrupt.
+ *
+ * @details Checks for timeouts, and executes timeout handlers for expired timers.
+ */
+extern "C" void RTC1_IRQHandler(void)
+{
+ // Clear all events (also unexpected ones)
+ NRF_RTC1->EVENTS_COMPARE[0] = 0;
+ NRF_RTC1->EVENTS_COMPARE[1] = 0;
+ NRF_RTC1->EVENTS_COMPARE[2] = 0;
+ NRF_RTC1->EVENTS_COMPARE[3] = 0;
+ NRF_RTC1->EVENTS_TICK = 0;
+ NRF_RTC1->EVENTS_OVRFLW = 0;
+
+ // Check for expired timers
+ timer_timeouts_check();
+}
+
+/**@brief Function for handling the SWI0 interrupt.
+ *
+ * @details Performs all updates to the timer list.
+ */
+extern "C" void SWI0_IRQHandler(void)
+{
+ timer_list_handler();
+}
+
+uint32_t app_timer_init(uint32_t prescaler,
+ uint8_t max_timers,
+ uint8_t op_queues_size,
+ void * p_buffer,
+ app_timer_evt_schedule_func_t evt_schedule_func)
+{
+ int i;
+
+ // Check that buffer is correctly aligned
+ if (!is_word_aligned(p_buffer))
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+ // Check for NULL buffer
+ if (p_buffer == NULL)
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+
+ // Stop RTC to prevent any running timers from expiring (in case of reinitialization)
+ rtc1_stop();
+
+ m_evt_schedule_func = evt_schedule_func;
+
+ // Initialize timer node array
+ m_node_array_size = max_timers;
+ mp_nodes = (timer_node_t *) p_buffer;
+
+ for (i = 0; i < max_timers; i++)
+ {
+ mp_nodes[i].state = STATE_FREE;
+ mp_nodes[i].is_running = false;
+ }
+
+ // Skip timer node array
+ p_buffer = &((uint8_t *)p_buffer)[max_timers * sizeof(timer_node_t)];
+
+ // Initialize users array
+ m_user_array_size = APP_TIMER_INT_LEVELS;
+ mp_users = (timer_user_t *) p_buffer;
+
+ // Skip user array
+ p_buffer = &((uint8_t *)p_buffer)[APP_TIMER_INT_LEVELS * sizeof(timer_user_t)];
+
+ // Initialize operation queues
+ for (i = 0; i < APP_TIMER_INT_LEVELS; i++)
+ {
+ timer_user_t * p_user = &mp_users[i];
+
+ p_user->first = 0;
+ p_user->last = 0;
+ p_user->user_op_queue_size = op_queues_size;
+ p_user->p_user_op_queue = (timer_user_op_t *) p_buffer;
+
+ // Skip operation queue
+ p_buffer = &((uint8_t *)p_buffer)[op_queues_size * sizeof(timer_user_op_t)];
+ }
+
+ m_timer_id_head = TIMER_NULL;
+ m_ticks_elapsed_q_read_ind = 0;
+ m_ticks_elapsed_q_write_ind = 0;
+
+ NVIC_ClearPendingIRQ(SWI0_IRQn);
+ NVIC_SetPriority(SWI0_IRQn, SWI0_IRQ_PRI);
+ NVIC_EnableIRQ(SWI0_IRQn);
+
+ rtc1_init(prescaler);
+
+ m_ticks_latest = rtc1_counter_get();
+
+ return NRF_SUCCESS;
+}
+
+
+uint32_t app_timer_create(app_timer_id_t * p_timer_id,
+ app_timer_mode_t mode,
+ app_timer_timeout_handler_t timeout_handler)
+{
+ int i;
+
+ // Check state and parameters
+ if (mp_nodes == NULL)
+ {
+ return NRF_ERROR_INVALID_STATE;
+ }
+ if (timeout_handler == NULL)
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+ if (p_timer_id == NULL)
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+
+ // Find free timer
+ for (i = 0; i < m_node_array_size; i++)
+ {
+ if (mp_nodes[i].state == STATE_FREE)
+ {
+ mp_nodes[i].state = STATE_ALLOCATED;
+ mp_nodes[i].mode = mode;
+ mp_nodes[i].p_timeout_handler = timeout_handler;
+
+ *p_timer_id = i;
+ return NRF_SUCCESS;
+ }
+ }
+
+ return NRF_ERROR_NO_MEM;
+}
+
+
+/**@brief Function for creating a timer user id from the current interrupt level.
+ *
+ * @return Timer user id.
+*/
+static timer_user_id_t user_id_get(void)
+{
+ timer_user_id_t ret;
+
+ STATIC_ASSERT(APP_TIMER_INT_LEVELS == 3);
+
+ switch (current_int_priority_get())
+ {
+ case APP_IRQ_PRIORITY_HIGH:
+ ret = APP_HIGH_USER_ID;
+ break;
+
+ case APP_IRQ_PRIORITY_LOW:
+ ret = APP_LOW_USER_ID;
+ break;
+
+ default:
+ ret = THREAD_MODE_USER_ID;
+ break;
+ }
+
+ return ret;
+}
+
+
+uint32_t app_timer_start(app_timer_id_t timer_id, uint32_t timeout_ticks, void * p_context)
+{
+ uint32_t timeout_periodic;
+
+ // Check state and parameters
+ if (mp_nodes == NULL)
+ {
+ return NRF_ERROR_INVALID_STATE;
+ }
+ if ((timer_id >= m_node_array_size) || (timeout_ticks < APP_TIMER_MIN_TIMEOUT_TICKS))
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+ if (mp_nodes[timer_id].state != STATE_ALLOCATED)
+ {
+ return NRF_ERROR_INVALID_STATE;
+ }
+
+ // Schedule timer start operation
+ timeout_periodic = (mp_nodes[timer_id].mode == APP_TIMER_MODE_REPEATED) ? timeout_ticks : 0;
+
+ return timer_start_op_schedule(user_id_get(),
+ timer_id,
+ timeout_ticks,
+ timeout_periodic,
+ p_context);
+}
+
+
+uint32_t app_timer_stop(app_timer_id_t timer_id)
+{
+ // Check state and parameters
+ if (mp_nodes == NULL)
+ {
+ return NRF_ERROR_INVALID_STATE;
+ }
+ if (timer_id >= m_node_array_size)
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+ if (mp_nodes[timer_id].state != STATE_ALLOCATED)
+ {
+ return NRF_ERROR_INVALID_STATE;
+ }
+
+ // Schedule timer stop operation
+ return timer_stop_op_schedule(user_id_get(), timer_id);
+}
+
+
+uint32_t app_timer_stop_all(void)
+{
+ // Check state
+ if (mp_nodes == NULL)
+ {
+ return NRF_ERROR_INVALID_STATE;
+ }
+
+ return timer_stop_all_op_schedule(user_id_get());
+}
+
+
+uint32_t app_timer_cnt_get(uint32_t * p_ticks)
+{
+ *p_ticks = rtc1_counter_get();
+ return NRF_SUCCESS;
+}
+
+
+uint32_t app_timer_cnt_diff_compute(uint32_t ticks_to,
+ uint32_t ticks_from,
+ uint32_t * p_ticks_diff)
+{
+ *p_ticks_diff = ticks_diff_get(ticks_to, ticks_from);
+ return NRF_SUCCESS;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/app_common/crc16.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/app_common/crc16.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,31 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+#include "crc16.h"
+#include <stdio.h>
+
+uint16_t crc16_compute(const uint8_t * p_data, uint32_t size, const uint16_t * p_crc)
+{
+ uint32_t i;
+ uint16_t crc = (p_crc == NULL) ? 0xffff : *p_crc;
+
+ for (i = 0; i < size; i++)
+ {
+ crc = (unsigned char)(crc >> 8) | (crc << 8);
+ crc ^= p_data[i];
+ crc ^= (unsigned char)(crc & 0xff) >> 4;
+ crc ^= (crc << 8) << 4;
+ crc ^= ((crc & 0xff) << 4) << 1;
+ }
+
+ return crc;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/app_common/pstorage.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/app_common/pstorage.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,759 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include "nordic_common.h"
+#include "nrf_error.h"
+#include "nrf_assert.h"
+//#include "nrf.h"
+#include "nrf_soc.h"
+#include "app_util.h"
+#include "pstorage.h"
+
+
+#define INVALID_OPCODE 0x00 /**< Invalid op code identifier. */
+#define SOC_MAX_WRITE_SIZE 1024 /**< Maximum write size allowed for a single call to \ref sd_flash_write as specified in the SoC API. */
+
+/**
+ * @defgroup api_param_check API Parameters check macros.
+ *
+ * @details Macros that verify parameters passed to the module in the APIs. These macros
+ * could be mapped to nothing in final versions of code to save execution and size.
+ *
+ * @{
+ */
+/**
+ * @brief Check if the input pointer is NULL, if it is returns NRF_ERROR_NULL.
+ */
+#define NULL_PARAM_CHECK(PARAM) \
+ if ((PARAM) == NULL) \
+ { \
+ return NRF_ERROR_NULL; \
+ }
+
+/**
+ * @brief Verifies the module identifier supplied by the application is within permissible
+ * range.
+ */
+#define MODULE_ID_RANGE_CHECK(ID) \
+ if ((((ID)->module_id) >= PSTORAGE_MAX_APPLICATIONS) || \
+ (m_app_table[(ID)->module_id].cb == NULL)) \
+ { \
+ return NRF_ERROR_INVALID_PARAM; \
+ }
+
+/**
+ * @brief Verifies the block identifier supplied by the application is within the permissible
+ * range.
+ */
+#define BLOCK_ID_RANGE_CHECK(ID) \
+ if (((ID)->block_id) >= (m_app_table[(ID)->module_id].base_id + \
+ (m_app_table[(ID)->module_id].block_count * MODULE_BLOCK_SIZE(ID)))) \
+ { \
+ return NRF_ERROR_INVALID_PARAM; \
+ }
+
+
+/**
+ * @brief Verifies the block size requested by the application can be supported by the module.
+ */
+#define BLOCK_SIZE_CHECK(X) \
+ if (((X) > PSTORAGE_MAX_BLOCK_SIZE) || ((X) < PSTORAGE_MIN_BLOCK_SIZE)) \
+ { \
+ return NRF_ERROR_INVALID_PARAM; \
+ }
+
+/**
+ * @brief Verifies block size requested by Application in registration API.
+ */
+#define BLOCK_COUNT_CHECK(COUNT, SIZE) \
+ if (((COUNT) == 0) || ((m_next_page_addr + ((COUNT) *(SIZE)) > PSTORAGE_DATA_END_ADDR))) \
+ { \
+ return NRF_ERROR_INVALID_PARAM; \
+ }
+
+/**
+ * @brief Verifies size parameter provided by application in API.
+ */
+#define SIZE_CHECK(ID, SIZE) \
+ if(((SIZE) == 0) || ((SIZE) > MODULE_BLOCK_SIZE(ID))) \
+ { \
+ return NRF_ERROR_INVALID_PARAM; \
+ }
+
+/**
+ * @brief Verifies offset parameter provided by application in API.
+ */
+#define OFFSET_CHECK(ID, OFFSET, SIZE) \
+ if(((SIZE) + (OFFSET)) > MODULE_BLOCK_SIZE(ID)) \
+ { \
+ return NRF_ERROR_INVALID_PARAM; \
+ }
+
+#ifdef PSTORAGE_RAW_MODE_ENABLE
+
+/**
+ * @brief Verifies the module identifier supplied by the application is registered for raw mode.
+ */
+#define MODULE_RAW_ID_RANGE_CHECK(ID) \
+ if ((PSTORAGE_MAX_APPLICATIONS+1 != ((ID)->module_id)) || \
+ (m_raw_app_table.cb == NULL)) \
+ { \
+ return NRF_ERROR_INVALID_PARAM; \
+ }
+
+#endif // PSTORAGE_RAW_MODE_ENABLE
+
+/**@} */
+
+/**@brief Verify module's initialization status.
+ *
+ * @details Verify module's initialization status. Returns NRF_ERROR_INVALID_STATE in case a
+ * module API is called without initializing the module.
+ */
+#define VERIFY_MODULE_INITIALIZED() \
+ do \
+ { \
+ if (!m_module_initialized) \
+ { \
+ return NRF_ERROR_INVALID_STATE; \
+ } \
+ } while(0)
+
+/**@brief Macro to fetch the block size registered for the module. */
+#define MODULE_BLOCK_SIZE(ID) (m_app_table[(ID)->module_id].block_size)
+
+/**@} */
+
+/**
+ * @brief Application registration information.
+ *
+ * @details Define application specific information that application needs to maintain to be able
+ * to process requests from each one of them.
+ */
+typedef struct
+{
+ pstorage_ntf_cb_t cb; /**< Callback registered with the module to be notified of result of flash access. */
+ pstorage_block_t base_id; /**< Base block id assigned to the module */
+ pstorage_size_t block_size; /**< Size of block for the module */
+ pstorage_size_t block_count; /**< Number of block requested by application */
+ pstorage_size_t no_of_pages; /**< Variable to remember how many pages have been allocated for this module. This information is used for clearing of block, so that application does not need to have knowledge of number of pages its using. */
+} pstorage_module_table_t;
+
+#ifdef PSTORAGE_RAW_MODE_ENABLE
+/**
+ * @brief Application registration information.
+ *
+ * @details Define application specific information that application registered for raw mode.
+ */
+typedef struct
+{
+ pstorage_ntf_cb_t cb; /**< Callback registered with the module to be notified of result of flash access. */
+ uint16_t no_of_pages; /**< Variable to remember how many pages have been allocated for this module. This information is used for clearing of block, so that application does not need to have knowledge of number of pages its using. */
+} pstorage_raw_module_table_t;
+#endif // PSTORAGE_RAW_MODE_ENABLE
+
+
+
+
+/**
+ * @brief Defines command queue element.
+ *
+ * @details Defines command queue element. Each element encapsulates needed information to process
+ * a flash access command.
+ */
+typedef struct
+{
+ uint8_t op_code; /**< Identifies flash access operation being queued. Element is free is op-code is INVALID_OPCODE */
+ pstorage_size_t size; /**< Identifies size in bytes requested for the operation. */
+ pstorage_size_t offset; /**< Offset requested by the application for access operation. */
+ pstorage_handle_t storage_addr; /**< Address/Identifier for persistent memory. */
+ uint8_t * p_data_addr; /**< Address/Identifier for data memory. This is assumed to be resident memory. */
+} cmd_queue_element_t;
+
+
+/**
+ * @brief Defines command queue, an element is free is op_code field is not invalid.
+ *
+ * @details Defines commands enqueued for flash access. At any point of time, this queue has one or
+ * more flash access operation pending if the count field is not zero. When the queue is
+ * not empty, the rp (read pointer) field points to the flash access command in progress
+ * or to requested next. The queue implements a simple first in first out algorithm.
+ * Data addresses are assumed to be resident.
+ */
+typedef struct
+{
+ uint8_t rp; /**< Read pointer, pointing to flash access that is ongoing or to be requested next. */
+ uint8_t count; /**< Number of elements in the queue. */
+ bool flash_access; /**< Flag to ensure an flash event received is for an request issued by the module. */
+ cmd_queue_element_t cmd[PSTORAGE_CMD_QUEUE_SIZE]; /**< Array to maintain flash access operation details */
+}cmd_queue_t;
+
+static cmd_queue_t m_cmd_queue; /**< Flash operation request queue. */
+static pstorage_module_table_t m_app_table[PSTORAGE_MAX_APPLICATIONS]; /**< Registered application information table. */
+
+#ifdef PSTORAGE_RAW_MODE_ENABLE
+static pstorage_raw_module_table_t m_raw_app_table; /**< Registered application information table for raw mode. */
+#endif // PSTORAGE_RAW_MODE_ENABLE
+
+static pstorage_size_t m_next_app_instance; /**< Points to the application module instance that can be allocated next */
+static uint32_t m_next_page_addr; /**< Points to the flash address that can be allocated to a module next, this is needed as blocks of a module can span across flash pages. */
+static bool m_module_initialized = false; /**< Flag for checking if module has been initialized. */
+static pstorage_size_t m_round_val; /**< Round value for multiple round operations. For erase operations, the round value will contain current round counter which is identical to number of pages erased. For store operations, the round value contains current round of operation * SOC_MAX_WRITE_SIZE to ensure each store to the SoC Flash API is within the SoC limit. */
+
+static uint32_t process_cmd(void);
+static void app_notify (uint32_t reason);
+
+/**
+ * @defgroup utility_functions Utility internal functions.
+ * @{
+ * @details Utility functions needed for interfacing with flash through SoC APIs.
+ * SoC APIs are non blocking and provide the result of flash access through an event.
+ *
+ * @note Only one flash access operation is permitted at a time by SoC. Hence a queue is
+ * maintained by this module.
+ */
+
+/**
+ * @brief Initializes command queue element.
+ */
+static void cmd_queue_init_element(uint32_t index)
+{
+ // Internal function and checks on range of index can be avoided
+ m_cmd_queue.cmd[index].op_code = INVALID_OPCODE;
+ m_cmd_queue.cmd[index].size = 0;
+ m_cmd_queue.cmd[index].storage_addr.module_id = PSTORAGE_MAX_APPLICATIONS;
+ m_cmd_queue.cmd[index].storage_addr.block_id = 0;
+ m_cmd_queue.cmd[index].p_data_addr = NULL;
+ m_cmd_queue.cmd[index].offset = 0;
+}
+
+
+/**
+ * @brief Initializes command queue.
+ */
+static void cmd_queue_init (void)
+{
+ uint32_t cmd_index;
+
+ m_round_val = 0;
+ m_cmd_queue.rp = 0;
+ m_cmd_queue.count = 0;
+ m_cmd_queue.flash_access = false;
+
+ for(cmd_index = 0; cmd_index < PSTORAGE_CMD_QUEUE_SIZE; cmd_index++)
+ {
+ cmd_queue_init_element(cmd_index);
+ }
+}
+
+
+/**
+ * @brief Routine to enqueue a flash access operation.
+ */
+static uint32_t cmd_queue_enqueue(uint8_t opcode, pstorage_handle_t * p_storage_addr,uint8_t * p_data_addr, pstorage_size_t size, pstorage_size_t offset)
+{
+ uint32_t retval;
+ uint8_t write_index = 0;
+ retval = NRF_ERROR_NO_MEM;
+
+ // Check if flash access is ongoing.
+ if ((m_cmd_queue.flash_access == false) && (m_cmd_queue.count == 0))
+ {
+ m_cmd_queue.rp = 0;
+ m_cmd_queue.cmd[m_cmd_queue.rp].op_code = opcode;
+ m_cmd_queue.cmd[m_cmd_queue.rp].p_data_addr = p_data_addr;
+ m_cmd_queue.cmd[m_cmd_queue.rp].storage_addr = (*p_storage_addr);
+ m_cmd_queue.cmd[m_cmd_queue.rp].size = size;
+ m_cmd_queue.cmd[m_cmd_queue.rp].offset = offset;
+ m_cmd_queue.count++;
+ retval = process_cmd();
+ if ((retval == NRF_SUCCESS) || (retval == NRF_ERROR_BUSY))
+ {
+ // In case of busy error code, it is possible to attempt to access flash
+ retval = NRF_SUCCESS;
+ }
+ }
+ else if (m_cmd_queue.count != PSTORAGE_CMD_QUEUE_SIZE)
+ {
+ // Enqueue the command if it is queue is not full
+ write_index = m_cmd_queue.rp + m_cmd_queue.count;
+
+ if (write_index >= PSTORAGE_CMD_QUEUE_SIZE)
+ {
+ write_index -= PSTORAGE_CMD_QUEUE_SIZE;
+ }
+
+ m_cmd_queue.cmd[write_index].op_code = opcode;
+ m_cmd_queue.cmd[write_index].p_data_addr = p_data_addr;
+ m_cmd_queue.cmd[write_index].storage_addr = (*p_storage_addr);
+ m_cmd_queue.cmd[write_index].size = size;
+ m_cmd_queue.cmd[write_index].offset = offset;
+ m_cmd_queue.count++;
+
+ retval = NRF_SUCCESS;
+
+ }
+
+ return retval;
+}
+
+
+/**
+ * @brief Dequeues a command element.
+ */
+static uint32_t cmd_queue_dequeue(void)
+{
+ uint32_t retval;
+
+ cmd_queue_element_t * p_cmd = &m_cmd_queue.cmd[m_cmd_queue.rp];
+ // Update count and read pointer to process any queued requests
+ if(m_round_val >= p_cmd->size)
+ {
+ // Initialize/free the element as it is now processed.
+ cmd_queue_init_element(m_cmd_queue.rp);
+ m_round_val = 0;
+ m_cmd_queue.count--;
+ m_cmd_queue.rp++;
+ }
+
+ retval = NRF_SUCCESS;
+
+ // If any flash operation is enqueued, schedule
+ if (m_cmd_queue.count)
+ {
+ retval = process_cmd();
+
+ if (retval != NRF_SUCCESS)
+ {
+ // Flash could be accessed by modules other than Bond Manager, hence a busy error is
+ // acceptable, but any other error needs to be indicated to the bond manager
+ if (retval != NRF_ERROR_BUSY)
+ {
+ app_notify (retval);
+ }
+ else
+ {
+ // In case of busy next trigger will be a success or a failure event
+ }
+ }
+ }
+ else
+ {
+ // No flash access request pending
+ }
+
+ return retval;
+}
+
+
+/**
+ * @brief Routine to notify application of any errors.
+ */
+static void app_notify (uint32_t result)
+{
+ pstorage_ntf_cb_t ntf_cb;
+ uint8_t op_code = m_cmd_queue.cmd[m_cmd_queue.rp].op_code;
+
+#ifdef PSTORAGE_RAW_MODE_ENABLE
+ if(m_cmd_queue.cmd[m_cmd_queue.rp].storage_addr.module_id == (PSTORAGE_MAX_APPLICATIONS + 1))
+ {
+ ntf_cb = m_raw_app_table.cb;
+ }
+ else
+#endif // PSTORAGE_RAW_MODE_ENABLE
+ {
+ ntf_cb = m_app_table[m_cmd_queue.cmd[m_cmd_queue.rp].storage_addr.module_id].cb;
+ }
+
+ // Indicate result to client.
+ // For PSTORAGE_CLEAR_OP_CODE no size is returned as the size field is used only internally
+ // for clients registering multiple pages.
+ ntf_cb(&m_cmd_queue.cmd[m_cmd_queue.rp].storage_addr,
+ op_code,
+ result,
+ m_cmd_queue.cmd[m_cmd_queue.rp].p_data_addr,
+ op_code == PSTORAGE_CLEAR_OP_CODE ? 0 : m_cmd_queue.cmd[m_cmd_queue.rp].size);
+}
+
+
+/**
+ * @brief Handles Flash Access Result Events.
+ */
+void pstorage_sys_event_handler (uint32_t sys_evt)
+{
+ uint32_t retval;
+
+ retval = NRF_SUCCESS;
+
+ // Its possible the flash access was not initiated by bond manager, hence
+ // event is processed only if the event triggered was for an operation requested by the
+ // bond manager.
+ if (m_cmd_queue.flash_access == true)
+ {
+ cmd_queue_element_t * p_cmd;
+ m_cmd_queue.flash_access = false;
+ switch (sys_evt)
+ {
+ case NRF_EVT_FLASH_OPERATION_SUCCESS:
+ p_cmd = &m_cmd_queue.cmd[m_cmd_queue.rp];
+ if ((p_cmd->op_code != PSTORAGE_CLEAR_OP_CODE) || (m_round_val >= p_cmd->size))
+ {
+ app_notify(retval);
+ }
+ // Schedule any queued flash access operations
+ retval = cmd_queue_dequeue ();
+ if (retval != NRF_SUCCESS)
+ {
+ app_notify(retval);
+ }
+
+ break;
+ case NRF_EVT_FLASH_OPERATION_ERROR:
+ app_notify(NRF_ERROR_TIMEOUT);
+ break;
+ default:
+ // No implementation needed.
+ break;
+ }
+ }
+}
+
+
+/**
+ * @brief Routine called to actually issue the flash access request to the SoftDevice.
+ */
+static uint32_t process_cmd(void)
+{
+ uint32_t retval;
+ uint32_t storage_addr;
+ cmd_queue_element_t * p_cmd;
+
+ retval = NRF_ERROR_FORBIDDEN;
+
+ p_cmd = &m_cmd_queue.cmd[m_cmd_queue.rp];
+
+ storage_addr = p_cmd->storage_addr.block_id;
+
+ if (p_cmd->op_code == PSTORAGE_CLEAR_OP_CODE)
+ {
+ // Calculate page number before copy.
+ uint32_t page_number;
+
+ page_number = ((storage_addr / PSTORAGE_FLASH_PAGE_SIZE) +
+ m_round_val);
+
+ retval = sd_flash_page_erase(page_number);
+
+ if (NRF_SUCCESS == retval)
+ {
+ m_round_val++;
+ }
+ }
+ else if (p_cmd->op_code == PSTORAGE_STORE_OP_CODE)
+ {
+ uint32_t size;
+ uint8_t * p_data_addr = p_cmd->p_data_addr;
+
+ p_data_addr += m_round_val;
+
+ storage_addr += (p_cmd->offset + m_round_val);
+
+ size = p_cmd->size - m_round_val;
+
+ if (size < SOC_MAX_WRITE_SIZE)
+ {
+ retval = sd_flash_write(((uint32_t *)storage_addr),
+ (uint32_t *)p_data_addr,
+ size / sizeof(uint32_t));
+ }
+ else
+ {
+ retval = sd_flash_write(((uint32_t *)storage_addr),
+ (uint32_t *)p_data_addr,
+ SOC_MAX_WRITE_SIZE / sizeof(uint32_t));
+ }
+
+
+ if (retval == NRF_SUCCESS)
+ {
+ m_round_val += SOC_MAX_WRITE_SIZE;
+ }
+ }
+ else
+ {
+ // Should never reach here.
+ }
+
+ if (retval == NRF_SUCCESS)
+ {
+ m_cmd_queue.flash_access = true;
+ }
+
+ return retval;
+}
+/** @} */
+
+
+/**
+ * @brief Module initialization routine to be called once by the application.
+ */
+uint32_t pstorage_init(void)
+{
+ unsigned int index;
+ cmd_queue_init();
+
+ m_next_app_instance = 0;
+ m_next_page_addr = PSTORAGE_DATA_START_ADDR;
+ m_round_val = 0;
+
+ for(index = 0; index < PSTORAGE_MAX_APPLICATIONS; index++)
+ {
+ m_app_table[index].cb = NULL;
+ m_app_table[index].block_size = 0;
+ m_app_table[index].no_of_pages = 0;
+ m_app_table[index].block_count = 0;
+ }
+
+#ifdef PSTORAGE_RAW_MODE_ENABLE
+ m_raw_app_table.cb = NULL;
+ m_raw_app_table.no_of_pages = 0;
+#endif //PSTORAGE_RAW_MODE_ENABLE
+
+ m_module_initialized = true;
+ return NRF_SUCCESS;
+}
+
+/**
+ * @brief Registration routine to request persistent memory of certain sizes based on
+ * application module requirements.
+ */
+uint32_t pstorage_register(pstorage_module_param_t * p_module_param,
+ pstorage_handle_t * p_block_id)
+{
+ uint16_t page_count;
+ uint32_t total_size;
+
+ VERIFY_MODULE_INITIALIZED();
+ NULL_PARAM_CHECK(p_module_param);
+ NULL_PARAM_CHECK(p_block_id);
+ NULL_PARAM_CHECK(p_module_param->cb);
+ BLOCK_SIZE_CHECK(p_module_param->block_size);
+ BLOCK_COUNT_CHECK(p_module_param->block_count, p_module_param->block_size);
+
+ if (m_next_app_instance == PSTORAGE_MAX_APPLICATIONS)
+ {
+ return NRF_ERROR_NO_MEM;
+ }
+
+ p_block_id->module_id = m_next_app_instance;
+ p_block_id->block_id = m_next_page_addr;
+ m_app_table[m_next_app_instance].base_id = p_block_id->block_id;
+ m_app_table[m_next_app_instance].cb = p_module_param->cb;
+ m_app_table[m_next_app_instance].block_size = p_module_param->block_size;
+ m_app_table[m_next_app_instance].block_count = p_module_param->block_count;
+
+ // Calculate number of flash pages allocated for the device.
+ page_count = 0;
+ total_size = p_module_param->block_size * p_module_param->block_count;
+ do
+ {
+ page_count++;
+ if (total_size > PSTORAGE_FLASH_PAGE_SIZE)
+ {
+ total_size -= PSTORAGE_FLASH_PAGE_SIZE;
+ }
+ else
+ {
+ total_size = 0;
+ }
+ m_next_page_addr += PSTORAGE_FLASH_PAGE_SIZE;
+ }while(total_size >= PSTORAGE_FLASH_PAGE_SIZE);
+
+ m_app_table[m_next_app_instance].no_of_pages = page_count;
+ m_next_app_instance++;
+
+ return NRF_SUCCESS;
+}
+
+
+/**
+ * @brief API to get the next block identifier.
+ */
+uint32_t pstorage_block_identifier_get(pstorage_handle_t * p_base_id,
+ pstorage_size_t block_num,
+ pstorage_handle_t * p_block_id)
+{
+ pstorage_handle_t temp_id;
+
+ VERIFY_MODULE_INITIALIZED();
+ NULL_PARAM_CHECK(p_base_id);
+ NULL_PARAM_CHECK(p_block_id);
+ MODULE_ID_RANGE_CHECK(p_base_id);
+
+ temp_id = (*p_base_id);
+ temp_id.block_id += (block_num * MODULE_BLOCK_SIZE(p_base_id));
+ BLOCK_ID_RANGE_CHECK(&temp_id);
+ (*p_block_id) = temp_id;
+
+ return NRF_SUCCESS;
+}
+
+
+/**
+ * @brief API to store data persistently.
+ */
+uint32_t pstorage_store(pstorage_handle_t * p_dest,
+ uint8_t * p_src,
+ pstorage_size_t size,
+ pstorage_size_t offset)
+{
+ VERIFY_MODULE_INITIALIZED();
+ NULL_PARAM_CHECK(p_src);
+ NULL_PARAM_CHECK(p_dest);
+ MODULE_ID_RANGE_CHECK (p_dest);
+ BLOCK_ID_RANGE_CHECK(p_dest);
+ SIZE_CHECK(p_dest,size);
+ OFFSET_CHECK(p_dest,offset,size);
+
+ // Verify word alignment.
+ if ((!is_word_aligned(p_src)) || (!is_word_aligned(p_src+offset)))
+ {
+ return NRF_ERROR_INVALID_ADDR;
+ }
+
+ return cmd_queue_enqueue(PSTORAGE_STORE_OP_CODE, p_dest, p_src, size, offset);
+}
+
+
+/**
+ * @brief API to load data from persistent memory.
+ */
+uint32_t pstorage_load(uint8_t * p_dest,
+ pstorage_handle_t * p_src,
+ pstorage_size_t size,
+ pstorage_size_t offset)
+{
+ VERIFY_MODULE_INITIALIZED();
+ NULL_PARAM_CHECK(p_src);
+ NULL_PARAM_CHECK(p_dest);
+ MODULE_ID_RANGE_CHECK (p_src);
+ BLOCK_ID_RANGE_CHECK(p_src);
+ SIZE_CHECK(p_src,size);
+ OFFSET_CHECK(p_src,offset,size);
+
+ // Verify word alignment.
+ if ((!is_word_aligned (p_dest)) || (!is_word_aligned (p_dest + offset)))
+ {
+ return NRF_ERROR_INVALID_ADDR;
+ }
+
+ memcpy (p_dest, (((uint8_t *)p_src->block_id) + offset), size);
+
+ return NRF_SUCCESS;
+}
+
+
+/**
+ * @brief API to clear data in blocks of persistent memory.
+ */
+uint32_t pstorage_clear(pstorage_handle_t * p_dest, pstorage_size_t size)
+{
+ uint32_t retval;
+ uint32_t pages;
+
+ VERIFY_MODULE_INITIALIZED();
+ NULL_PARAM_CHECK(p_dest);
+ MODULE_ID_RANGE_CHECK(p_dest);
+ BLOCK_ID_RANGE_CHECK(p_dest);
+
+ pages = m_app_table[p_dest->module_id].no_of_pages;
+
+ retval = cmd_queue_enqueue(PSTORAGE_CLEAR_OP_CODE, p_dest, NULL , pages , 0);
+
+ return retval;
+}
+
+
+#ifdef PSTORAGE_RAW_MODE_ENABLE
+
+/**
+ * @brief Registration routine to request persistent memory of certain sizes based on
+ * application module requirements.
+ */
+uint32_t pstorage_raw_register(pstorage_module_param_t * p_module_param,
+ pstorage_handle_t * p_block_id)
+{
+ VERIFY_MODULE_INITIALIZED();
+ NULL_PARAM_CHECK(p_module_param);
+ NULL_PARAM_CHECK(p_block_id);
+ NULL_PARAM_CHECK(p_module_param->cb);
+
+ if (m_raw_app_table.cb != NULL)
+ {
+ return NRF_ERROR_NO_MEM;
+ }
+
+ p_block_id->module_id = PSTORAGE_MAX_APPLICATIONS + 1;
+ m_raw_app_table.cb = p_module_param->cb;
+
+ return NRF_SUCCESS;
+}
+
+
+/**
+ * @brief API to store data persistently.
+ */
+uint32_t pstorage_raw_store(pstorage_handle_t * p_dest,
+ uint8_t * p_src,
+ uint32_t size,
+ uint32_t offset)
+{
+ VERIFY_MODULE_INITIALIZED();
+ NULL_PARAM_CHECK(p_src);
+ NULL_PARAM_CHECK(p_dest);
+ MODULE_RAW_ID_RANGE_CHECK(p_dest);
+
+ // Verify word alignment.
+ if ((!is_word_aligned(p_src)) || (!is_word_aligned(p_src+offset)))
+ {
+ return NRF_ERROR_INVALID_ADDR;
+ }
+
+ return cmd_queue_enqueue(PSTORAGE_STORE_OP_CODE, p_dest, p_src, size, offset);
+}
+
+
+/**
+ * @brief API to clear data in blocks of persistent memory.
+ */
+uint32_t pstorage_raw_clear(pstorage_handle_t * p_dest, uint32_t size)
+{
+ uint32_t retval;
+ uint32_t pages;
+
+ VERIFY_MODULE_INITIALIZED();
+ NULL_PARAM_CHECK(p_dest);
+ MODULE_RAW_ID_RANGE_CHECK(p_dest);
+
+ retval = NRF_SUCCESS;
+
+ pages = CEIL_DIV(size, PSTORAGE_FLASH_PAGE_SIZE);
+
+ retval = cmd_queue_enqueue(PSTORAGE_CLEAR_OP_CODE, p_dest, NULL , pages, 0);
+
+ return retval;
+}
+
+#endif // PSTORAGE_RAW_MODE_ENABLE
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/ble/ble_advdata.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/ble/ble_advdata.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,624 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+#include "ble_advdata.h"
+#include "nordic_common.h"
+#include "nrf_error.h"
+#include "ble_gap.h"
+#include "ble_srv_common.h"
+#include "app_util.h"
+
+
+// Offset from where advertisement data other than flags information can start.
+#define ADV_FLAG_OFFSET 2
+
+// Offset for Advertising Data.
+// Offset is 2 as each Advertising Data contain 1 octet of Adveritising Data Type and
+// one octet Advertising Data Length.
+#define ADV_DATA_OFFSET 2
+
+// NOTE: For now, Security Manager TK Value and Security Manager Out of Band Flags (OOB) are omitted
+// from the advertising data.
+
+
+static uint32_t name_encode(const ble_advdata_t * p_advdata,
+ uint8_t * p_encoded_data,
+ uint8_t * p_len)
+{
+ uint32_t err_code;
+ uint16_t rem_adv_data_len;
+ uint16_t actual_length;
+ uint8_t adv_data_format;
+ uint8_t adv_offset;
+
+ adv_offset = *p_len;
+
+
+ // Check for buffer overflow.
+ if ((adv_offset + ADV_DATA_OFFSET > BLE_GAP_ADV_MAX_SIZE) ||
+ ((p_advdata->short_name_len + ADV_DATA_OFFSET) > BLE_GAP_ADV_MAX_SIZE))
+ {
+ return NRF_ERROR_DATA_SIZE;
+ }
+ actual_length = rem_adv_data_len = (BLE_GAP_ADV_MAX_SIZE - adv_offset - ADV_FLAG_OFFSET);
+
+ // Get GAP device name and length
+ err_code = sd_ble_gap_device_name_get(&p_encoded_data[adv_offset + ADV_DATA_OFFSET],
+ &actual_length);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Check if device internd to use short name and it can fit available data size.
+ if ((p_advdata->name_type == BLE_ADVDATA_FULL_NAME) && (actual_length <= rem_adv_data_len))
+ {
+ // Complete device name can fit, setting Complete Name in Adv Data.
+ adv_data_format = BLE_GAP_AD_TYPE_COMPLETE_LOCAL_NAME;
+ rem_adv_data_len = actual_length;
+ }
+ else
+ {
+ // Else short name needs to be used. Or application has requested use of short name.
+ adv_data_format = BLE_GAP_AD_TYPE_SHORT_LOCAL_NAME;
+
+ // If application has set a preference on the short name size, it needs to be considered,
+ // else fit what can be fit.
+ if ((p_advdata->short_name_len != 0) && (p_advdata->short_name_len <= rem_adv_data_len))
+ {
+ // Short name fits available size.
+ rem_adv_data_len = p_advdata->short_name_len;
+ }
+ // Else whatever can fit the data buffer will be packed.
+ else
+ {
+ rem_adv_data_len = actual_length;
+ }
+ }
+
+ // Complete name field in encoded data.
+ p_encoded_data[adv_offset++] = rem_adv_data_len + 1;
+ p_encoded_data[adv_offset++] = adv_data_format;
+ (*p_len) += (rem_adv_data_len + ADV_DATA_OFFSET);
+
+ return NRF_SUCCESS;
+}
+
+
+static uint32_t appearance_encode(uint8_t * p_encoded_data, uint8_t * p_len)
+{
+ uint32_t err_code;
+ uint16_t appearance;
+
+ // Check for buffer overflow.
+ if ((*p_len) + 4 > BLE_GAP_ADV_MAX_SIZE)
+ {
+ return NRF_ERROR_DATA_SIZE;
+ }
+
+ // Get GAP appearance field.
+ err_code = sd_ble_gap_appearance_get(&appearance);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Encode Length, AD Type and Appearance.
+ p_encoded_data[(*p_len)++] = 3;
+ p_encoded_data[(*p_len)++] = BLE_GAP_AD_TYPE_APPEARANCE;
+
+ (*p_len) += uint16_encode(appearance, &p_encoded_data[*p_len]);
+
+ return NRF_SUCCESS;
+}
+
+
+static uint32_t uint8_array_encode(const uint8_array_t * p_uint8_array,
+ uint8_t adv_type,
+ uint8_t * p_encoded_data,
+ uint8_t * p_len)
+{
+ // Check parameter consistency.
+ if (p_uint8_array->p_data == NULL)
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+
+ // Check for buffer overflow.
+ if ((*p_len) + ADV_DATA_OFFSET + p_uint8_array->size > BLE_GAP_ADV_MAX_SIZE)
+ {
+ return NRF_ERROR_DATA_SIZE;
+ }
+
+ // Encode Length and AD Type.
+ p_encoded_data[(*p_len)++] = 1 + p_uint8_array->size;
+ p_encoded_data[(*p_len)++] = adv_type;
+
+ // Encode array.
+ memcpy(&p_encoded_data[*p_len], p_uint8_array->p_data, p_uint8_array->size);
+ (*p_len) += p_uint8_array->size;
+
+ return NRF_SUCCESS;
+}
+
+
+static uint32_t tx_power_level_encode(int8_t tx_power_level,
+ uint8_t * p_encoded_data,
+ uint8_t * p_len)
+{
+ // Check for buffer overflow.
+ if ((*p_len) + 3 > BLE_GAP_ADV_MAX_SIZE)
+ {
+ return NRF_ERROR_DATA_SIZE;
+ }
+
+ // Encode TX Power Level.
+ p_encoded_data[(*p_len)++] = 2;
+ p_encoded_data[(*p_len)++] = BLE_GAP_AD_TYPE_TX_POWER_LEVEL;
+ p_encoded_data[(*p_len)++] = (uint8_t)tx_power_level;
+
+ return NRF_SUCCESS;
+}
+
+
+static uint32_t uuid_list_sized_encode(const ble_advdata_uuid_list_t * p_uuid_list,
+ uint8_t adv_type,
+ uint8_t uuid_size,
+ uint8_t * p_encoded_data,
+ uint8_t * p_len)
+{
+ int i;
+ bool is_heading_written = false;
+ uint8_t start_pos = *p_len;
+
+ for (i = 0; i < p_uuid_list->uuid_cnt; i++)
+ {
+ uint32_t err_code;
+ uint8_t encoded_size;
+ ble_uuid_t uuid = p_uuid_list->p_uuids[i];
+
+ // Find encoded uuid size.
+ err_code = sd_ble_uuid_encode(&uuid, &encoded_size, NULL);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Check size.
+ if (encoded_size == uuid_size)
+ {
+ uint8_t heading_bytes = (is_heading_written) ? 0 : 2;
+
+ // Check for buffer overflow
+ if (*p_len + encoded_size + heading_bytes > BLE_GAP_ADV_MAX_SIZE)
+ {
+ return NRF_ERROR_DATA_SIZE;
+ }
+
+ if (!is_heading_written)
+ {
+ // Write AD structure heading.
+ (*p_len)++;
+ p_encoded_data[(*p_len)++] = adv_type;
+ is_heading_written = true;
+ }
+
+ // Write UUID.
+ err_code = sd_ble_uuid_encode(&uuid, &encoded_size, &p_encoded_data[*p_len]);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ (*p_len) += encoded_size;
+ }
+ }
+
+ if (is_heading_written)
+ {
+ // Write length.
+ p_encoded_data[start_pos] = (*p_len) - (start_pos + 1);
+ }
+
+ return NRF_SUCCESS;
+}
+
+
+static uint32_t uuid_list_encode(const ble_advdata_uuid_list_t * p_uuid_list,
+ uint8_t adv_type_16,
+ uint8_t adv_type_128,
+ uint8_t * p_encoded_data,
+ uint8_t * p_len)
+{
+ uint32_t err_code;
+
+ // Encode 16 bit UUIDs.
+ err_code = uuid_list_sized_encode(p_uuid_list,
+ adv_type_16,
+ sizeof(uint16_le_t),
+ p_encoded_data,
+ p_len);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Encode 128 bit UUIDs.
+ err_code = uuid_list_sized_encode(p_uuid_list,
+ adv_type_128,
+ sizeof(ble_uuid128_t),
+ p_encoded_data,
+ p_len);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ return NRF_SUCCESS;
+}
+
+
+static uint32_t conn_int_check(const ble_advdata_conn_int_t *p_conn_int)
+{
+ // Check Minimum Connection Interval.
+ if ((p_conn_int->min_conn_interval < 0x0006) ||
+ (
+ (p_conn_int->min_conn_interval > 0x0c80) &&
+ (p_conn_int->min_conn_interval != 0xffff)
+ )
+ )
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+
+ // Check Maximum Connection Interval.
+ if ((p_conn_int->max_conn_interval < 0x0006) ||
+ (
+ (p_conn_int->max_conn_interval > 0x0c80) &&
+ (p_conn_int->max_conn_interval != 0xffff)
+ )
+ )
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+
+ // Make sure Minimum Connection Interval is not bigger than Maximum Connection Interval.
+ if ((p_conn_int->min_conn_interval != 0xffff) &&
+ (p_conn_int->max_conn_interval != 0xffff) &&
+ (p_conn_int->min_conn_interval > p_conn_int->max_conn_interval)
+ )
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+
+ return NRF_SUCCESS;
+}
+
+
+static uint32_t conn_int_encode(const ble_advdata_conn_int_t * p_conn_int,
+ uint8_t * p_encoded_data,
+ uint8_t * p_len)
+{
+ uint32_t err_code;
+
+ // Check for buffer overflow.
+ if ((*p_len) + ADV_DATA_OFFSET + 2 * sizeof(uint16_le_t) > BLE_GAP_ADV_MAX_SIZE)
+ {
+ return NRF_ERROR_DATA_SIZE;
+ }
+
+ // Check parameters.
+ err_code = conn_int_check(p_conn_int);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Encode Length and AD Type.
+ p_encoded_data[(*p_len)++] = 1 + 2 * sizeof(uint16_le_t);
+ p_encoded_data[(*p_len)++] = BLE_GAP_AD_TYPE_SLAVE_CONNECTION_INTERVAL_RANGE;
+
+ // Encode Minimum and Maximum Connection Intervals.
+ (*p_len) += uint16_encode(p_conn_int->min_conn_interval, &p_encoded_data[*p_len]);
+ (*p_len) += uint16_encode(p_conn_int->max_conn_interval, &p_encoded_data[*p_len]);
+
+ return NRF_SUCCESS;
+}
+
+
+static uint32_t manuf_specific_data_encode(const ble_advdata_manuf_data_t * p_manuf_sp_data,
+ uint8_t * p_encoded_data,
+ uint8_t * p_len)
+{
+ uint8_t data_size = sizeof(uint16_le_t) + p_manuf_sp_data->data.size;
+
+ // Check for buffer overflow.
+ if ((*p_len) + ADV_DATA_OFFSET + data_size > BLE_GAP_ADV_MAX_SIZE)
+ {
+ return NRF_ERROR_DATA_SIZE;
+ }
+
+ // Encode Length and AD Type.
+ p_encoded_data[(*p_len)++] = 1 + data_size;
+ p_encoded_data[(*p_len)++] = BLE_GAP_AD_TYPE_MANUFACTURER_SPECIFIC_DATA;
+
+ // Encode Company Identifier.
+ (*p_len) += uint16_encode(p_manuf_sp_data->company_identifier, &p_encoded_data[*p_len]);
+
+ // Encode additional manufacturer specific data.
+ if (p_manuf_sp_data->data.size > 0)
+ {
+ if (p_manuf_sp_data->data.p_data == NULL)
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+ memcpy(&p_encoded_data[*p_len], p_manuf_sp_data->data.p_data, p_manuf_sp_data->data.size);
+ (*p_len) += p_manuf_sp_data->data.size;
+ }
+
+ return NRF_SUCCESS;
+}
+
+
+static uint32_t service_data_encode(const ble_advdata_t * p_advdata,
+ uint8_t * p_encoded_data,
+ uint8_t * p_len)
+{
+ uint8_t i;
+
+ // Check parameter consistency.
+ if (p_advdata->p_service_data_array == NULL)
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+
+ for (i = 0; i < p_advdata->service_data_count; i++)
+ {
+ ble_advdata_service_data_t * p_service_data;
+ uint8_t data_size;
+
+ p_service_data = &p_advdata->p_service_data_array[i];
+ data_size = sizeof(uint16_le_t) + p_service_data->data.size;
+
+ // Encode Length and AD Type.
+ p_encoded_data[(*p_len)++] = 1 + data_size;
+ p_encoded_data[(*p_len)++] = BLE_GAP_AD_TYPE_SERVICE_DATA;
+
+ // Encode service UUID.
+ (*p_len) += uint16_encode(p_service_data->service_uuid, &p_encoded_data[*p_len]);
+
+ // Encode additional service data.
+ if (p_service_data->data.size > 0)
+ {
+ if (p_service_data->data.p_data == NULL)
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+ memcpy(&p_encoded_data[*p_len], p_service_data->data.p_data, p_service_data->data.size);
+ (*p_len) += p_service_data->data.size;
+ }
+ }
+
+ return NRF_SUCCESS;
+}
+
+
+static uint32_t adv_data_encode(const ble_advdata_t * p_advdata,
+ uint8_t * p_encoded_data,
+ uint8_t * p_len)
+{
+ uint32_t err_code = NRF_SUCCESS;
+
+ *p_len = 0;
+
+ // Encode name.
+ if (p_advdata->name_type != BLE_ADVDATA_NO_NAME)
+ {
+ err_code = name_encode(p_advdata, p_encoded_data, p_len);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ // Encode appearance.
+ if (p_advdata->include_appearance)
+ {
+ err_code = appearance_encode(p_encoded_data, p_len);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ // Encode flags.
+ if (p_advdata->flags.size > 0)
+ {
+ err_code = uint8_array_encode(&p_advdata->flags,
+ BLE_GAP_AD_TYPE_FLAGS,
+ p_encoded_data,
+ p_len);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ // Encode TX power level.
+ if (p_advdata->p_tx_power_level != NULL)
+ {
+ err_code = tx_power_level_encode(*p_advdata->p_tx_power_level, p_encoded_data, p_len);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ // Encode 'more available' uuid list.
+ if (p_advdata->uuids_more_available.uuid_cnt > 0)
+ {
+ err_code = uuid_list_encode(&p_advdata->uuids_more_available,
+ BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_MORE_AVAILABLE,
+ BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_MORE_AVAILABLE,
+ p_encoded_data,
+ p_len);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ // Encode 'complete' uuid list.
+ if (p_advdata->uuids_complete.uuid_cnt > 0)
+ {
+ err_code = uuid_list_encode(&p_advdata->uuids_complete,
+ BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_COMPLETE,
+ BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_COMPLETE,
+ p_encoded_data,
+ p_len);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ // Encode 'solicited service' uuid list.
+ if (p_advdata->uuids_solicited.uuid_cnt > 0)
+ {
+ err_code = uuid_list_encode(&p_advdata->uuids_solicited,
+ BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_16BIT,
+ BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_128BIT,
+ p_encoded_data,
+ p_len);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ // Encode Slave Connection Interval Range.
+ if (p_advdata->p_slave_conn_int != NULL)
+ {
+ err_code = conn_int_encode(p_advdata->p_slave_conn_int, p_encoded_data, p_len);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ // Encode Manufacturer Specific Data.
+ if (p_advdata->p_manuf_specific_data != NULL)
+ {
+ err_code = manuf_specific_data_encode(p_advdata->p_manuf_specific_data,
+ p_encoded_data,
+ p_len);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ // Encode Service Data.
+ if (p_advdata->service_data_count > 0)
+ {
+ err_code = service_data_encode(p_advdata, p_encoded_data, p_len);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ return err_code;
+}
+
+
+static uint32_t advdata_check(const ble_advdata_t * p_advdata)
+{
+ // Flags must be included in advertising data, and the BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED flag must be set.
+ if ((p_advdata->flags.size == 0) ||
+ (p_advdata->flags.p_data == NULL) ||
+ ((p_advdata->flags.p_data[0] & BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED) == 0)
+ )
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+
+ return NRF_SUCCESS;
+}
+
+
+static uint32_t srdata_check(const ble_advdata_t * p_srdata)
+{
+ // Flags shall not be included in the scan response data.
+ if (p_srdata->flags.size > 0)
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+
+ return NRF_SUCCESS;
+}
+
+
+uint32_t ble_advdata_set(const ble_advdata_t * p_advdata, const ble_advdata_t * p_srdata)
+{
+ uint32_t err_code;
+ uint8_t len_advdata = 0;
+ uint8_t len_srdata = 0;
+ uint8_t encoded_advdata[BLE_GAP_ADV_MAX_SIZE];
+ uint8_t encoded_srdata[BLE_GAP_ADV_MAX_SIZE];
+ uint8_t * p_encoded_advdata;
+ uint8_t * p_encoded_srdata;
+
+ // Encode advertising data (if supplied).
+ if (p_advdata != NULL)
+ {
+ err_code = advdata_check(p_advdata);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ err_code = adv_data_encode(p_advdata, encoded_advdata, &len_advdata);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ p_encoded_advdata = encoded_advdata;
+ }
+ else
+ {
+ p_encoded_advdata = NULL;
+ }
+
+ // Encode scan response data (if supplied).
+ if (p_srdata != NULL)
+ {
+ err_code = srdata_check(p_srdata);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ err_code = adv_data_encode(p_srdata, encoded_srdata, &len_srdata);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ p_encoded_srdata = encoded_srdata;
+ }
+ else
+ {
+ p_encoded_srdata = NULL;
+ }
+
+ // Pass encoded advertising data and/or scan response data to the stack.
+ return sd_ble_gap_adv_data_set(p_encoded_advdata, len_advdata, p_encoded_srdata, len_srdata);
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/ble/ble_advdata_parser.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/ble/ble_advdata_parser.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,21 @@
+#include "ble_advdata_parser.h"
+
+uint32_t ble_advdata_parser_field_find(uint8_t type, uint8_t * p_advdata, uint8_t * len, uint8_t ** pp_field_data)
+{
+ uint32_t index = 0;
+
+ while (index < *len)
+ {
+ uint8_t field_length = p_advdata[index];
+ uint8_t field_type = p_advdata[index+1];
+
+ if (field_type == type)
+ {
+ *pp_field_data = &p_advdata[index+2];
+ *len = field_length-1;
+ return NRF_SUCCESS;
+ }
+ index += field_length+1;
+ }
+ return NRF_ERROR_NOT_FOUND;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/ble/ble_bondmngr.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/ble/ble_bondmngr.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,1594 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+#include "ble_bondmngr.h"
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include "nordic_common.h"
+#include "nrf_error.h"
+#include "ble_gap.h"
+#include "ble_srv_common.h"
+#include "app_util.h"
+#include "nrf_assert.h"
+//#include "nrf.h"
+#include "nrf51_bitfields.h"
+#include "crc16.h"
+#include "pstorage.h"
+#include "ble_bondmngr_cfg.h"
+
+#define CCCD_SIZE 6 /**< Number of bytes needed for storing the state of one CCCD. */
+#define CRC_SIZE 2 /**< Size of CRC in sys_attribute data. */
+#define SYS_ATTR_BUFFER_MAX_LEN (((BLE_BONDMNGR_CCCD_COUNT + 1) * CCCD_SIZE) + CRC_SIZE) /**< Size of sys_attribute data. */
+#define MAX_NUM_CENTRAL_WHITE_LIST MIN(BLE_BONDMNGR_MAX_BONDED_CENTRALS, 8) /**< Maximum number of whitelisted centrals supported.*/
+#define MAX_BONDS_IN_FLASH 10 /**< Maximum number of bonds that can be stored in flash. */
+#define BOND_MANAGER_DATA_SIGNATURE 0x53240000
+
+/**@defgroup ble_bond_mngr_sec_access Bond Manager Security Status Access Macros
+ * @brief The following group of macros abstract access to Security Status with a peer.
+ * @{
+ */
+
+#define SEC_STATUS_INIT_VAL 0x00 /**< Initialization value for security status flags. */
+#define ENC_STATUS_SET_VAL 0x01 /**< Bitmask for encryption status. */
+#define BOND_IN_PROGRESS_SET_VAL 0x02 /**< Bitmask for 'bonding in progress'. */
+
+
+/**@brief Macro for setting the Encryption Status for current link.
+ *
+ * @details Macro for setting the Encryption Status for current link.
+ */
+#define ENCRYPTION_STATUS_SET() \
+ do \
+ { \
+ m_sec_con_status |= ENC_STATUS_SET_VAL; \
+ } while (0)
+
+/**@brief Macro for getting the Encryption Status for current link.
+ *
+ * @details Macro for getting the Encryption Status for current link.
+ */
+#define ENCRYPTION_STATUS_GET() \
+ (((m_sec_con_status & ENC_STATUS_SET_VAL) == 0) ? false : true)
+
+/**@brief Macro for resetting the Encryption Status for current link.
+ *
+ * @details Macro for resetting the Encryption Status for current link.
+ */
+#define ENCRYPTION_STATUS_RESET() \
+ do \
+ { \
+ m_sec_con_status &= (~ENC_STATUS_SET_VAL); \
+ } while (0)
+
+
+/**@brief Macro for resetting the Bonding In Progress status for current link.
+ *
+ * @details Macro for resetting the Bonding In Progress status for current link.
+ */
+#define BONDING_IN_PROGRESS_STATUS_SET() \
+ do \
+ { \
+ m_sec_con_status |= BOND_IN_PROGRESS_SET_VAL; \
+ } while (0)
+
+/**@brief Macro for setting the Bonding In Progress status for current link.
+ *
+ * @details Macro for setting the Bonding In Progress status for current link.
+ */
+#define BONDING_IN_PROGRESS_STATUS_GET() \
+ (((m_sec_con_status & BOND_IN_PROGRESS_SET_VAL) == 0) ? false: true)
+
+/**@brief Macro for resetting the Bonding In Progress status for current link.
+ *
+ * @details Macro for resetting the Bonding In Progress status for current link.
+ */
+#define BONDING_IN_PROGRESS_STATUS_RESET() \
+ do \
+ { \
+ m_sec_con_status &= (~BOND_IN_PROGRESS_SET_VAL); \
+ } while (0)
+
+/**@brief Macro for resetting all security status flags for current link.
+ *
+ * @details Macro for resetting all security status flags for current link.
+ */
+#define SECURITY_STATUS_RESET() \
+ do \
+ { \
+ m_sec_con_status = SEC_STATUS_INIT_VAL; \
+ } while (0)
+
+/** @} */
+
+/**@brief Verify module's initialization status.
+ *
+ * @details Verify module's initialization status. Returns NRF_INVALID_STATE in case a module API
+ * is called without initializing the module.
+ */
+#define VERIFY_MODULE_INITIALIZED() \
+ do \
+ { \
+ if (!m_is_bondmngr_initialized) \
+ { \
+ return NRF_ERROR_INVALID_STATE; \
+ } \
+ } while(0)
+
+
+/**@brief This structure contains the Bonding Information for one central.
+ */
+typedef struct
+{
+ int32_t central_handle; /**< Central's handle (NOTE: Size is 32 bits just to make struct size dividable by 4). */
+ ble_gap_evt_auth_status_t auth_status; /**< Central authentication data. */
+ ble_gap_evt_sec_info_request_t central_id_info; /**< Central identification info. */
+ ble_gap_addr_t central_addr; /**< Central's address. */
+} central_bond_t;
+
+STATIC_ASSERT(sizeof(central_bond_t) % 4 == 0);
+
+/**@brief This structure contains the System Attributes information related to one central.
+ */
+typedef struct
+{
+ int32_t central_handle; /**< Central's handle (NOTE: Size is 32 bits just to make struct size dividable by 4). */
+ uint8_t sys_attr[SYS_ATTR_BUFFER_MAX_LEN]; /**< Central sys_attribute data. */
+ uint32_t sys_attr_size; /**< Central sys_attribute data's size (NOTE: Size is 32 bits just to make struct size dividable by 4). */
+} central_sys_attr_t;
+
+STATIC_ASSERT(sizeof(central_sys_attr_t) % 4 == 0);
+
+/**@brief This structure contains the Bonding Information and System Attributes related to one
+ * central.
+ */
+typedef struct
+{
+ central_bond_t bond; /**< Bonding information. */
+ central_sys_attr_t sys_attr; /**< System attribute information. */
+} central_t;
+
+/**@brief This structure contains the whitelisted addresses.
+ */
+typedef struct
+{
+ int8_t central_handle; /**< Central's handle. */
+ ble_gap_addr_t * p_addr; /**< Pointer to the central's address if BLE_GAP_ADDR_TYPE_PUBLIC. */
+} whitelist_addr_t;
+
+/**@brief This structure contains the whitelisted IRKs.
+ */
+typedef struct
+{
+ int8_t central_handle; /**< Central's handle. */
+ ble_gap_irk_t * p_irk; /**< Pointer to the central's irk if available. */
+} whitelist_irk_t;
+
+static bool m_is_bondmngr_initialized = false; /**< Flag for checking if module has been initialized. */
+static ble_bondmngr_init_t m_bondmngr_config; /**< Configuration as specified by the application. */
+static uint16_t m_conn_handle; /**< Current connection handle. */
+static central_t m_central; /**< Current central data. */
+static central_t m_centrals_db[BLE_BONDMNGR_MAX_BONDED_CENTRALS]; /**< Pointer to start of bonded centrals database. */
+static uint8_t m_centrals_in_db_count; /**< Number of bonded centrals. */
+static whitelist_addr_t m_whitelist_addr[MAX_NUM_CENTRAL_WHITE_LIST]; /**< List of central's addresses for the whitelist. */
+static whitelist_irk_t m_whitelist_irk[MAX_NUM_CENTRAL_WHITE_LIST]; /**< List of central's IRKs for the whitelist. */
+static uint8_t m_addr_count; /**< Number of addresses in the whitelist. */
+static uint8_t m_irk_count; /**< Number of IRKs in the whitelist. */
+static uint16_t m_crc_bond_info; /**< Combined CRC for all Bonding Information currently stored in flash. */
+static uint16_t m_crc_sys_attr; /**< Combined CRC for all System Attributes currently stored in flash. */
+static pstorage_handle_t mp_flash_bond_info; /**< Pointer to flash location to write next Bonding Information. */
+static pstorage_handle_t mp_flash_sys_attr; /**< Pointer to flash location to write next System Attribute information. */
+static uint8_t m_bond_info_in_flash_count; /**< Number of Bonding Information currently stored in flash. */
+static uint8_t m_sys_attr_in_flash_count; /**< Number of System Attributes currently stored in flash. */
+static uint8_t m_sec_con_status; /**< Variable to denote security status.*/
+static bool m_bond_loaded; /**< Variable to indicate if the bonding information of the currently connected central is available in the RAM.*/
+static bool m_sys_attr_loaded; /**< Variable to indicate if the system attribute information of the currently connected central is loaded from the database and set in the S110 SoftDevice.*/
+static uint32_t m_bond_crc_array[BLE_BONDMNGR_MAX_BONDED_CENTRALS];
+static uint32_t m_sys_crc_array[BLE_BONDMNGR_MAX_BONDED_CENTRALS];
+
+/**@brief Function for extracting the CRC from an encoded 32 bit number that typical resides in
+ * the flash memory
+ *
+ * @param[in] header Header containing CRC and magic number.
+ * @param[out] p_crc Extracted CRC.
+ *
+ * @retval NRF_SUCCESS CRC successfully extracted.
+ * @retval NRF_ERROR_NOT_FOUND Flash seems to be empty.
+ * @retval NRF_ERROR_INVALID_DATA Header does not contain the magic number.
+ */
+static uint32_t crc_extract(uint32_t header, uint16_t * p_crc)
+{
+ if ((header & 0xFFFF0000U) == BOND_MANAGER_DATA_SIGNATURE)
+ {
+ *p_crc = (uint16_t)(header & 0x0000FFFFU);
+
+ return NRF_SUCCESS;
+ }
+ else if (header == 0xFFFFFFFFU)
+ {
+ return NRF_ERROR_NOT_FOUND;
+ }
+ else
+ {
+ return NRF_ERROR_INVALID_DATA;
+ }
+}
+
+
+/**@brief Function for storing the Bonding Information of the specified central to the flash.
+ *
+ * @param[in] p_bond Bonding information to be stored.
+ *
+ * @return NRF_SUCCESS on success, an error_code otherwise.
+ */
+static uint32_t bond_info_store(central_bond_t * p_bond)
+{
+ uint32_t err_code;
+ pstorage_handle_t dest_block;
+
+ // Check if flash is full
+ if (m_bond_info_in_flash_count >= MAX_BONDS_IN_FLASH)
+ {
+ return NRF_ERROR_NO_MEM;
+ }
+
+ // Check if this is the first bond to be stored
+ if (m_bond_info_in_flash_count == 0)
+ {
+ // Initialize CRC
+ m_crc_bond_info = crc16_compute(NULL, 0, NULL);
+ }
+
+ // Get block pointer from base
+ err_code = pstorage_block_identifier_get(&mp_flash_bond_info,m_bond_info_in_flash_count,&dest_block);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Write Bonding Information
+ err_code = pstorage_store(&dest_block,
+ (uint8_t *)p_bond,
+ sizeof(central_bond_t),
+ sizeof(uint32_t));
+
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ m_crc_bond_info = crc16_compute((uint8_t *)p_bond,
+ sizeof(central_bond_t),
+ &m_crc_bond_info);
+
+ // Write header
+ m_bond_crc_array[m_bond_info_in_flash_count] = (BOND_MANAGER_DATA_SIGNATURE | m_crc_bond_info);
+
+ err_code = pstorage_store (&dest_block, (uint8_t *)&m_bond_crc_array[m_bond_info_in_flash_count],sizeof(uint32_t),0);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ m_bond_info_in_flash_count++;
+ return NRF_SUCCESS;
+}
+
+
+/**@brief Function for storing the System Attributes related to a specified central in flash.
+ *
+ * @param[in] p_sys_attr System Attributes to be stored.
+ *
+ * @return NRF_SUCCESS on success, an error_code otherwise.
+ */
+static uint32_t sys_attr_store(central_sys_attr_t * p_sys_attr)
+{
+ uint32_t err_code;
+ pstorage_handle_t dest_block;
+
+ // Check if flash is full.
+ if (m_sys_attr_in_flash_count >= MAX_BONDS_IN_FLASH)
+ {
+ return NRF_ERROR_NO_MEM;
+ }
+
+ // Check if this is the first time any System Attributes is stored.
+ if (m_sys_attr_in_flash_count == 0)
+ {
+ // Initialize CRC
+ m_crc_sys_attr = crc16_compute(NULL, 0, NULL);
+ }
+
+
+ // Get block pointer from base
+ err_code = pstorage_block_identifier_get(&mp_flash_sys_attr,m_sys_attr_in_flash_count,&dest_block);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Write System Attributes in flash.
+ err_code = pstorage_store(&dest_block,
+ (uint8_t *)p_sys_attr,
+ sizeof(central_sys_attr_t),
+ sizeof(uint32_t));
+
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ m_crc_sys_attr = crc16_compute((uint8_t *)p_sys_attr,
+ sizeof(central_sys_attr_t),
+ &m_crc_sys_attr);
+
+ // Write header.
+ m_sys_crc_array[m_sys_attr_in_flash_count] = (BOND_MANAGER_DATA_SIGNATURE | m_crc_sys_attr);
+
+ err_code = pstorage_store (&dest_block,
+ (uint8_t *)&m_sys_crc_array[m_sys_attr_in_flash_count],
+ sizeof(uint32_t),
+ 0);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ m_sys_attr_in_flash_count++;
+
+
+ return NRF_SUCCESS;
+}
+
+
+/**@brief Function for loading the Bonding Information of one central from flash.
+ *
+ * @param[out] p_bond Loaded Bonding Information.
+ *
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ */
+static uint32_t bonding_info_load_from_flash(central_bond_t * p_bond)
+{
+ pstorage_handle_t source_block;
+ uint32_t err_code;
+ uint32_t crc;
+ uint16_t crc_header;
+
+ // Check if this is the first bond to be loaded, in which case the
+ // m_bond_info_in_flash_count variable would have the intial value 0.
+ if (m_bond_info_in_flash_count == 0)
+ {
+ // Initialize CRC.
+ m_crc_bond_info = crc16_compute(NULL, 0, NULL);
+ }
+
+ // Get block pointer from base
+ err_code = pstorage_block_identifier_get(&mp_flash_bond_info,
+ m_bond_info_in_flash_count,
+ &source_block);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ err_code = pstorage_load((uint8_t *)&crc, &source_block, sizeof(uint32_t), 0);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Extract CRC from header.
+ err_code = crc_extract(crc, &crc_header);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Load central.
+ err_code = pstorage_load((uint8_t *)p_bond,
+ &source_block,
+ sizeof(central_bond_t),
+ sizeof(uint32_t));
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Check CRC.
+ m_crc_bond_info = crc16_compute((uint8_t *)p_bond,
+ sizeof(central_bond_t),
+ &m_crc_bond_info);
+ if (m_crc_bond_info == crc_header)
+ {
+ m_bond_info_in_flash_count++;
+ return NRF_SUCCESS;
+ }
+ else
+ {
+ return NRF_ERROR_INVALID_DATA;
+ }
+}
+
+
+
+/**@brief Function for loading the System Attributes related to one central from flash.
+ *
+ * @param[out] p_sys_attr Loaded System Attributes.
+ *
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ */
+static uint32_t sys_attr_load_from_flash(central_sys_attr_t * p_sys_attr)
+{
+ pstorage_handle_t source_block;
+ uint32_t err_code;
+ uint32_t crc;
+ uint16_t crc_header;
+
+ // Check if this is the first time System Attributes is loaded from flash, in which case the
+ // m_sys_attr_in_flash_count variable would have the initial value 0.
+ if (m_sys_attr_in_flash_count == 0)
+ {
+ // Initialize CRC.
+ m_crc_sys_attr = crc16_compute(NULL, 0, NULL);
+ }
+
+ // Get block pointer from base
+ err_code = pstorage_block_identifier_get(&mp_flash_sys_attr,
+ m_sys_attr_in_flash_count,
+ &source_block);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ err_code = pstorage_load((uint8_t *)&crc, &source_block, sizeof(uint32_t), 0);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Extract CRC from header.
+ err_code = crc_extract(crc, &crc_header);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ err_code = pstorage_load((uint8_t *)p_sys_attr,
+ &source_block,
+ sizeof(central_sys_attr_t),
+ sizeof(uint32_t));
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Check CRC.
+ m_crc_sys_attr = crc16_compute((uint8_t *)p_sys_attr,
+ sizeof(central_sys_attr_t),
+ &m_crc_sys_attr);
+
+ if (m_crc_sys_attr == crc_header)
+ {
+ m_sys_attr_in_flash_count++;
+ return NRF_SUCCESS;
+ }
+ else
+ {
+ return NRF_ERROR_INVALID_DATA;
+ }
+}
+
+
+/**@brief Function for erasing the flash pages that contain Bonding Information and System
+ * Attributes.
+ *
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ */
+static uint32_t flash_pages_erase(void)
+{
+ uint32_t err_code;
+
+ err_code = pstorage_clear(&mp_flash_bond_info, MAX_BONDS_IN_FLASH);
+
+ if (err_code == NRF_SUCCESS)
+ {
+ err_code = pstorage_clear(&mp_flash_sys_attr, MAX_BONDS_IN_FLASH);
+ }
+
+ return err_code;
+}
+
+
+/**@brief Function for checking if Bonding Information in RAM is different from that in
+ * flash.
+ *
+ * @return TRUE if Bonding Information in flash and RAM are different, FALSE otherwise.
+ */
+static bool bond_info_changed(void)
+{
+ int i;
+ uint16_t crc = crc16_compute(NULL, 0, NULL);
+
+ // Compute CRC for all bonds in database.
+ for (i = 0; i < m_centrals_in_db_count; i++)
+ {
+ crc = crc16_compute((uint8_t *)&m_centrals_db[i].bond,
+ sizeof(central_bond_t),
+ &crc);
+ }
+
+ // Compare the computed CRS to CRC stored in flash.
+ return (crc != m_crc_bond_info);
+}
+
+
+/**@brief Function for checking if System Attributes in RAM is different from that in flash.
+ *
+ * @return TRUE if System Attributes in flash and RAM are different, FALSE otherwise.
+ */
+static bool sys_attr_changed(void)
+{
+ int i;
+ uint16_t crc = crc16_compute(NULL, 0, NULL);
+
+ // Compute CRC for all System Attributes in database.
+ for (i = 0; i < m_centrals_in_db_count; i++)
+ {
+ crc = crc16_compute((uint8_t *)&m_centrals_db[i].sys_attr,
+ sizeof(central_sys_attr_t),
+ &crc);
+ }
+
+ // Compare the CRC of System Attributes in flash with that of the System Attributes in memory.
+ return (crc != m_crc_sys_attr);
+}
+
+
+/**@brief Function for setting the System Attributes for specified central to the SoftDevice, or
+ * clearing the System Attributes if central is a previously unknown.
+ *
+ * @param[in] p_central Central for which the System Attributes is to be set.
+ *
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ */
+static uint32_t central_sys_attr_set(central_t * p_central)
+{
+ uint8_t * p_sys_attr;
+
+ if (m_central.sys_attr.sys_attr_size != 0)
+ {
+ if (m_central.sys_attr.sys_attr_size > SYS_ATTR_BUFFER_MAX_LEN)
+ {
+ return NRF_ERROR_INTERNAL;
+ }
+
+ p_sys_attr = m_central.sys_attr.sys_attr;
+ }
+ else
+ {
+ p_sys_attr = NULL;
+ }
+
+ return sd_ble_gatts_sys_attr_set(m_conn_handle, p_sys_attr, m_central.sys_attr.sys_attr_size);
+}
+
+
+/**@brief Function for updating the whitelist data structures.
+ */
+static void update_whitelist(void)
+{
+ int i;
+
+ for (i = 0, m_addr_count = 0, m_irk_count = 0; i < m_centrals_in_db_count; i++)
+ {
+ central_bond_t * p_bond = &m_centrals_db[i].bond;
+
+ if (p_bond->auth_status.central_kex.irk)
+ {
+ m_whitelist_irk[m_irk_count].central_handle = p_bond->central_handle;
+ m_whitelist_irk[m_irk_count].p_irk = &(p_bond->auth_status.central_keys.irk);
+
+ m_irk_count++;
+ }
+
+ if (p_bond->central_addr.addr_type != BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE)
+ {
+ m_whitelist_addr[m_addr_count].central_handle = p_bond->central_handle;
+ m_whitelist_addr[m_addr_count].p_addr = &(p_bond->central_addr);
+
+ m_addr_count++;
+ }
+ }
+}
+
+
+/**@brief Function for handling the authentication status event related to a new central.
+ *
+ * @details This function adds the new central to the database and stores the central's Bonding
+ * Information to flash. It also notifies the application when the new bond is created,
+ * and sets the System Attributes to prepare the stack for connection with the new
+ * central.
+ *
+ * @param[in] p_auth_status New authentication status.
+ *
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ */
+static uint32_t on_auth_status_from_new_central(ble_gap_evt_auth_status_t * p_auth_status)
+{
+ uint32_t err_code;
+
+ if (m_centrals_in_db_count >= BLE_BONDMNGR_MAX_BONDED_CENTRALS)
+ {
+ return NRF_ERROR_NO_MEM;
+ }
+
+ // Update central.
+ m_central.bond.auth_status = *p_auth_status;
+ m_central.bond.central_id_info.div = p_auth_status->periph_keys.enc_info.div;
+ m_central.sys_attr.sys_attr_size = 0;
+
+ // Add new central to database.
+ m_central.bond.central_handle = m_centrals_in_db_count;
+ m_centrals_db[m_centrals_in_db_count++] = m_central;
+
+ update_whitelist();
+
+ m_bond_loaded = true;
+
+ // Clear System Attributes.
+ err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Write new central's Bonding Information to flash.
+ err_code = bond_info_store(&m_central.bond);
+ if ((err_code == NRF_ERROR_NO_MEM) && (m_bondmngr_config.evt_handler != NULL))
+ {
+ ble_bondmngr_evt_t evt;
+
+ evt.evt_type = BLE_BONDMNGR_EVT_BOND_FLASH_FULL;
+ evt.central_handle = m_central.bond.central_handle;
+ evt.central_id = m_central.bond.central_id_info.div;
+
+ m_bondmngr_config.evt_handler(&evt);
+ }
+ else if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Pass the event to application.
+ if (m_bondmngr_config.evt_handler != NULL)
+ {
+ ble_bondmngr_evt_t evt;
+
+ evt.evt_type = BLE_BONDMNGR_EVT_NEW_BOND;
+ evt.central_handle = m_central.bond.central_handle;
+ evt.central_id = m_central.bond.central_id_info.div;
+
+ m_bondmngr_config.evt_handler(&evt);
+ }
+
+ return NRF_SUCCESS;
+}
+
+
+/**@brief Function for updating the current central's entry in the database.
+ */
+static uint32_t central_update(void)
+{
+ uint32_t err_code;
+ int32_t central_handle = m_central.bond.central_handle;
+
+ if ((central_handle >= 0) && (central_handle < m_centrals_in_db_count))
+ {
+ // Update the database based on whether the bond and system attributes have
+ // been loaded or not to avoid overwriting information that was not used in the
+ // connection session.
+ if (m_bond_loaded)
+ {
+ m_centrals_db[central_handle].bond = m_central.bond;
+ }
+
+ if (m_sys_attr_loaded)
+ {
+ m_centrals_db[central_handle].sys_attr = m_central.sys_attr;
+ }
+
+ update_whitelist();
+
+ err_code = NRF_SUCCESS;
+ }
+ else
+ {
+ err_code = NRF_ERROR_INTERNAL;
+ }
+
+ return err_code;
+}
+
+
+/**@brief Function for searching for the central in the database of known centrals.
+ *
+ * @details If the central is found, the variable m_central will be populated with all the
+ * information (Bonding Information and System Attributes) related to that central.
+ *
+ * @param[in] central_id Central Identifier.
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ */
+static uint32_t central_find_in_db(uint16_t central_id)
+{
+ int i;
+
+ for (i = 0; i < m_centrals_in_db_count; i++)
+ {
+ if (central_id == m_centrals_db[i].bond.central_id_info.div)
+ {
+ m_central = m_centrals_db[i];
+ return NRF_SUCCESS;
+ }
+ }
+
+ return NRF_ERROR_NOT_FOUND;
+}
+
+
+/**@brief Function for loading all Bonding Information and System Attributes from flash.
+ *
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ */
+static uint32_t load_all_from_flash(void)
+{
+ uint32_t err_code;
+ int i;
+
+ m_centrals_in_db_count = 0;
+
+ while (m_centrals_in_db_count < BLE_BONDMNGR_MAX_BONDED_CENTRALS)
+ {
+ central_bond_t central_bond_info;
+ int central_handle;
+
+ // Load Bonding Information.
+ err_code = bonding_info_load_from_flash(¢ral_bond_info);
+ if (err_code == NRF_ERROR_NOT_FOUND)
+ {
+ // No more bonds in flash.
+ break;
+ }
+ else if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ central_handle = central_bond_info.central_handle;
+ if (central_handle > m_centrals_in_db_count)
+ {
+ // Central handle value(s) missing in flash. This should never happen.
+ return NRF_ERROR_INVALID_DATA;
+ }
+ else
+ {
+ // Add/update Bonding Information in central array.
+ m_centrals_db[central_handle].bond = central_bond_info;
+ if (central_handle == m_centrals_in_db_count)
+ {
+ // New central handle, clear System Attributes.
+ m_centrals_db[central_handle].sys_attr.sys_attr_size = 0;
+ m_centrals_db[central_handle].sys_attr.central_handle = INVALID_CENTRAL_HANDLE;
+ m_centrals_in_db_count++;
+ }
+ else
+ {
+ // Entry was updated, do nothing.
+ }
+ }
+ }
+
+ // Load System Attributes for all previously known centrals.
+ for (i = 0; i < m_centrals_in_db_count; i++)
+ {
+ central_sys_attr_t central_sys_attr;
+
+ // Load System Attributes.
+ err_code = sys_attr_load_from_flash(¢ral_sys_attr);
+ if (err_code == NRF_ERROR_NOT_FOUND)
+ {
+ // No more System Attributes in flash.
+ break;
+ }
+ else if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ if (central_sys_attr.central_handle > m_centrals_in_db_count)
+ {
+ // Central handle value(s) missing in flash. This should never happen.
+ return NRF_ERROR_INVALID_DATA;
+ }
+ else
+ {
+ // Add/update Bonding Information in central array.
+ m_centrals_db[central_sys_attr.central_handle].sys_attr = central_sys_attr;
+ }
+ }
+
+ // Initialize the remaining empty bond entries in the memory.
+ for (i = m_centrals_in_db_count; i < BLE_BONDMNGR_MAX_BONDED_CENTRALS; i++)
+ {
+ m_centrals_db[i].bond.central_handle = INVALID_CENTRAL_HANDLE;
+ m_centrals_db[i].sys_attr.sys_attr_size = 0;
+ m_centrals_db[i].sys_attr.central_handle = INVALID_CENTRAL_HANDLE;
+ }
+
+ // Update whitelist data structures.
+ update_whitelist();
+
+ return NRF_SUCCESS;
+}
+
+
+/**@brief Function for handling the connected event received from the BLE stack.
+ *
+ * @param[in] p_ble_evt Event received from the BLE stack.
+ */
+static void on_connect(ble_evt_t * p_ble_evt)
+{
+ m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
+
+ m_central.bond.central_handle = INVALID_CENTRAL_HANDLE;
+ m_central.bond.central_addr = p_ble_evt->evt.gap_evt.params.connected.peer_addr;
+ m_central.sys_attr.sys_attr_size = 0;
+
+ if (p_ble_evt->evt.gap_evt.params.connected.irk_match)
+ {
+ uint8_t irk_idx = p_ble_evt->evt.gap_evt.params.connected.irk_match_idx;
+
+ if ((irk_idx >= MAX_NUM_CENTRAL_WHITE_LIST) ||
+ (m_whitelist_irk[irk_idx].central_handle >= BLE_BONDMNGR_MAX_BONDED_CENTRALS))
+ {
+ m_bondmngr_config.error_handler(NRF_ERROR_INTERNAL);
+ }
+ else
+ {
+ m_central = m_centrals_db[m_whitelist_irk[irk_idx].central_handle];
+ }
+ }
+ else
+ {
+ int i;
+
+ for (i = 0; i < m_addr_count; i++)
+ {
+ ble_gap_addr_t * p_cur_addr = m_whitelist_addr[i].p_addr;
+
+ if (memcmp(p_cur_addr->addr, m_central.bond.central_addr.addr, BLE_GAP_ADDR_LEN) == 0)
+ {
+ m_central = m_centrals_db[m_whitelist_addr[i].central_handle];
+ break;
+ }
+ }
+ }
+
+ if (m_central.bond.central_handle != INVALID_CENTRAL_HANDLE)
+ {
+ // Reset bond and system attributes loaded variables.
+ m_bond_loaded = false;
+ m_sys_attr_loaded = false;
+
+ // Do not set the system attributes of the central on connection.
+ if (m_bondmngr_config.evt_handler != NULL)
+ {
+ ble_bondmngr_evt_t evt;
+
+ evt.evt_type = BLE_BONDMNGR_EVT_CONN_TO_BONDED_CENTRAL;
+ evt.central_handle = m_central.bond.central_handle;
+ evt.central_id = m_central.bond.central_id_info.div;
+
+ m_bondmngr_config.evt_handler(&evt);
+ }
+ }
+}
+
+
+/**@brief Function for handling the 'System Attributes Missing' event received from the
+ * SoftDevice.
+ *
+ * @param[in] p_ble_evt Event received from the BLE stack.
+ */
+static void on_sys_attr_missing(ble_evt_t * p_ble_evt)
+{
+ uint32_t err_code;
+
+ if (
+ (m_central.bond.central_handle == INVALID_CENTRAL_HANDLE) ||
+ !ENCRYPTION_STATUS_GET() ||
+ BONDING_IN_PROGRESS_STATUS_GET()
+ )
+ {
+ err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0);
+ }
+ else
+ {
+ // Current central is valid, use its data. Set the corresponding sys_attr.
+ err_code = central_sys_attr_set(&m_central);
+ if (err_code == NRF_SUCCESS)
+ {
+ // Set System Attributes loaded status variable.
+ m_sys_attr_loaded = true;
+ }
+ }
+
+ if (err_code != NRF_SUCCESS)
+ {
+ m_bondmngr_config.error_handler(err_code);
+ }
+}
+
+
+/**@brief Function for handling the new authentication status event, received from the
+ * SoftDevice, related to an already bonded central.
+ *
+ * @details This function also writes the updated Bonding Information to flash and notifies the
+ * application.
+ *
+ * @param[in] p_auth_status Updated authentication status.
+ */
+static void auth_status_update(ble_gap_evt_auth_status_t * p_auth_status)
+{
+ uint32_t err_code;
+
+ // Authentication status changed, update Bonding Information.
+ m_central.bond.auth_status = *p_auth_status;
+ m_central.bond.central_id_info.div = p_auth_status->periph_keys.enc_info.div;
+
+ memset(&(m_centrals_db[m_central.bond.central_handle]), 0, sizeof(central_t));
+ m_centrals_db[m_central.bond.central_handle] = m_central;
+
+ // Write updated Bonding Information to flash.
+ err_code = bond_info_store(&m_central.bond);
+ if ((err_code == NRF_ERROR_NO_MEM) && (m_bondmngr_config.evt_handler != NULL))
+ {
+ ble_bondmngr_evt_t evt;
+
+ evt.evt_type = BLE_BONDMNGR_EVT_BOND_FLASH_FULL;
+ evt.central_handle = m_central.bond.central_handle;
+ evt.central_id = m_central.bond.central_id_info.div;
+
+ m_bondmngr_config.evt_handler(&evt);
+ }
+ else if (err_code != NRF_SUCCESS)
+ {
+ m_bondmngr_config.error_handler(err_code);
+ }
+
+ // Pass the event to the application.
+ if (m_bondmngr_config.evt_handler != NULL)
+ {
+ ble_bondmngr_evt_t evt;
+
+ evt.evt_type = BLE_BONDMNGR_EVT_AUTH_STATUS_UPDATED;
+ evt.central_handle = m_central.bond.central_handle;
+ evt.central_id = m_central.bond.central_id_info.div;
+
+ m_bondmngr_config.evt_handler(&evt);
+ }
+}
+
+
+/**@brief Function for handling the Authentication Status event received from the BLE stack.
+ *
+ * @param[in] p_ble_evt Event received from the BLE stack.
+ */
+static void on_auth_status(ble_gap_evt_auth_status_t * p_auth_status)
+{
+ if (p_auth_status->auth_status != BLE_GAP_SEC_STATUS_SUCCESS)
+ {
+ return;
+ }
+
+ // Verify if its pairing and not bonding
+ if (!ENCRYPTION_STATUS_GET())
+ {
+ return;
+ }
+
+ if (m_central.bond.central_handle == INVALID_CENTRAL_HANDLE)
+ {
+ uint32_t err_code = central_find_in_db(p_auth_status->periph_keys.enc_info.div);
+
+ if (err_code == NRF_SUCCESS)
+ {
+ // Possible DIV Collision indicate error to application,
+ // not storing the new LTK
+ err_code = NRF_ERROR_FORBIDDEN;
+ }
+ else
+ {
+ // Add the new device to data base
+ err_code = on_auth_status_from_new_central(p_auth_status);
+ }
+
+ if (err_code != NRF_SUCCESS)
+ {
+ m_bondmngr_config.error_handler(err_code);
+ }
+ }
+ else
+ {
+ m_bond_loaded = true;
+
+ // Receiving a auth status again when already in have existing information!
+ auth_status_update(p_auth_status);
+ }
+}
+
+
+/**@brief Function for handling the Security Info Request event received from the BLE stack.
+ *
+ * @param[in] p_ble_evt Event received from the BLE stack.
+ */
+static void on_sec_info_request(ble_evt_t * p_ble_evt)
+{
+ uint32_t err_code;
+
+ err_code = central_find_in_db(p_ble_evt->evt.gap_evt.params.sec_info_request.div);
+ if (err_code == NRF_SUCCESS)
+ {
+ // Bond information has been found and loaded for security procedures. Reflect this in the
+ // status variable
+ m_bond_loaded = true;
+
+ // Central found in the list of bonded central. Use the encryption info for this central.
+ err_code = sd_ble_gap_sec_info_reply(m_conn_handle,
+ &m_central.bond.auth_status.periph_keys.enc_info,
+ NULL);
+ if (err_code != NRF_SUCCESS)
+ {
+ m_bondmngr_config.error_handler(err_code);
+ }
+
+ // Do not set the sys_attr yet, should be set only when sec_update is successful.
+ }
+ else if (err_code == NRF_ERROR_NOT_FOUND)
+ {
+ m_central.bond.central_id_info = p_ble_evt->evt.gap_evt.params.sec_info_request;
+
+ // New central.
+ err_code = sd_ble_gap_sec_info_reply(m_conn_handle, NULL, NULL);
+ if (err_code != NRF_SUCCESS)
+ {
+ m_bondmngr_config.error_handler(err_code);
+ }
+
+ // Initialize the sys_attr.
+ err_code = sd_ble_gatts_sys_attr_set(m_conn_handle, NULL, 0);
+ }
+
+ if (err_code != NRF_SUCCESS)
+ {
+ m_bondmngr_config.error_handler(err_code);
+ }
+}
+
+
+/**@brief Function for handling the Connection Security Update event received from the BLE
+ * stack.
+ *
+ * @param[in] p_ble_evt Event received from the BLE stack.
+ */
+static void on_sec_update(ble_gap_evt_conn_sec_update_t * p_sec_update)
+{
+ uint8_t security_mode = p_sec_update->conn_sec.sec_mode.sm;
+ uint8_t security_level = p_sec_update->conn_sec.sec_mode.lv;
+
+ if (((security_mode == 1) && (security_level > 1)) ||
+ ((security_mode == 2) && (security_level != 0)))
+ {
+ ENCRYPTION_STATUS_SET();
+
+ uint32_t err_code = central_sys_attr_set(&m_central);
+
+ if (err_code != NRF_SUCCESS)
+ {
+ m_bondmngr_config.error_handler(err_code);
+ }
+ else
+ {
+ m_sys_attr_loaded = true;
+ }
+
+ if (m_bondmngr_config.evt_handler != NULL)
+ {
+ ble_bondmngr_evt_t evt;
+
+ evt.evt_type = BLE_BONDMNGR_EVT_ENCRYPTED;
+ evt.central_handle = m_central.bond.central_handle;
+ evt.central_id = m_central.bond.central_id_info.div;
+
+ m_bondmngr_config.evt_handler(&evt);
+ }
+ }
+}
+
+
+/**@brief Function for handling the Connection Security Parameters Request event received from
+ * the BLE stack.
+ *
+ * @param[in] p_ble_evt Event received from the BLE stack.
+ */
+static void on_sec_param_request(ble_gap_evt_sec_params_request_t * p_sec_update)
+{
+ if (p_sec_update->peer_params.bond)
+ {
+ BONDING_IN_PROGRESS_STATUS_SET();
+
+ if (m_central.bond.central_handle != INVALID_CENTRAL_HANDLE)
+ {
+ // Bonding request received from a bonded central, make all system attributes null
+ m_central.sys_attr.sys_attr_size = 0;
+ memset(m_central.sys_attr.sys_attr, 0, SYS_ATTR_BUFFER_MAX_LEN);
+ }
+ }
+}
+
+
+void ble_bondmngr_on_ble_evt(ble_evt_t * p_ble_evt)
+{
+ if (!m_is_bondmngr_initialized)
+ {
+ m_bondmngr_config.error_handler(NRF_ERROR_INVALID_STATE);
+ }
+
+ switch (p_ble_evt->header.evt_id)
+ {
+ case BLE_GAP_EVT_CONNECTED:
+ on_connect(p_ble_evt);
+ break;
+
+ // NOTE: All actions to be taken on the Disconnected event are performed in
+ // ble_bondmngr_bonded_centrals_store(). This function must be called from the
+ // Disconnected handler of the application before advertising is restarted (to make
+ // sure the flash blocks are cleared while the radio is inactive).
+ case BLE_GAP_EVT_DISCONNECTED:
+ SECURITY_STATUS_RESET();
+ break;
+
+ case BLE_GATTS_EVT_SYS_ATTR_MISSING:
+ on_sys_attr_missing(p_ble_evt);
+ break;
+
+ case BLE_GAP_EVT_AUTH_STATUS:
+ on_auth_status(&p_ble_evt->evt.gap_evt.params.auth_status);
+ break;
+
+ case BLE_GAP_EVT_SEC_INFO_REQUEST:
+ on_sec_info_request(p_ble_evt);
+ break;
+
+ case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
+ on_sec_param_request(&p_ble_evt->evt.gap_evt.params.sec_params_request);
+ break;
+
+ case BLE_GAP_EVT_CONN_SEC_UPDATE:
+ on_sec_update(&p_ble_evt->evt.gap_evt.params.conn_sec_update);
+ break;
+
+ default:
+ // No implementation needed.
+ break;
+ }
+}
+
+
+uint32_t ble_bondmngr_bonded_centrals_store(void)
+{
+ uint32_t err_code;
+ int i;
+
+ VERIFY_MODULE_INITIALIZED();
+
+ if (m_central.bond.central_handle != INVALID_CENTRAL_HANDLE)
+ {
+ // Fetch System Attributes from stack.
+ uint16_t sys_attr_size = SYS_ATTR_BUFFER_MAX_LEN;
+
+ err_code = sd_ble_gatts_sys_attr_get(m_conn_handle,
+ m_central.sys_attr.sys_attr,
+ &sys_attr_size);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ m_central.sys_attr.central_handle = m_central.bond.central_handle;
+ m_central.sys_attr.sys_attr_size = (uint16_t)sys_attr_size;
+
+ // Update the current central.
+ err_code = central_update();
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ // Save Bonding Information if changed.
+ if (bond_info_changed())
+ {
+ // Erase flash page.
+ err_code = pstorage_clear(&mp_flash_bond_info,MAX_BONDS_IN_FLASH);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Store bond information for all centrals.
+ m_bond_info_in_flash_count = 0;
+ for (i = 0; i < m_centrals_in_db_count; i++)
+ {
+ err_code = bond_info_store(&m_centrals_db[i].bond);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+ }
+
+ // Save System Attributes, if changed.
+ if (sys_attr_changed())
+ {
+ // Erase flash page.
+ err_code = pstorage_clear(&mp_flash_sys_attr, MAX_BONDS_IN_FLASH);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ // Store System Attributes for all centrals.
+ m_sys_attr_in_flash_count = 0;
+ for (i = 0; i < m_centrals_in_db_count; i++)
+ {
+ err_code = sys_attr_store(&m_centrals_db[i].sys_attr);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+ }
+
+ m_conn_handle = BLE_CONN_HANDLE_INVALID;
+ m_central.bond.central_handle = INVALID_CENTRAL_HANDLE;
+ m_central.sys_attr.central_handle = INVALID_CENTRAL_HANDLE;
+ m_central.sys_attr.sys_attr_size = 0;
+ m_bond_loaded = false;
+ m_sys_attr_loaded = false;
+
+ return NRF_SUCCESS;
+}
+
+
+uint32_t ble_bondmngr_sys_attr_store(void)
+{
+ uint32_t err_code;
+
+ if (m_central.sys_attr.sys_attr_size == 0)
+ {
+ // Connected to new central. So the flash block for System Attributes for this
+ // central is empty. Hence no erase is needed.
+
+ uint16_t sys_attr_size = SYS_ATTR_BUFFER_MAX_LEN;
+
+ // Fetch System Attributes from stack.
+ err_code = sd_ble_gatts_sys_attr_get(m_conn_handle,
+ m_central.sys_attr.sys_attr,
+ &sys_attr_size);
+
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ m_central.sys_attr.central_handle = m_central.bond.central_handle;
+ m_central.sys_attr.sys_attr_size = (uint16_t)sys_attr_size;
+
+ // Copy the System Attributes to database.
+ m_centrals_db[m_central.bond.central_handle].sys_attr = m_central.sys_attr;
+
+ // Write new central's System Attributes to flash.
+ return (sys_attr_store(&m_central.sys_attr));
+ }
+ else
+ {
+ // Will not write to flash because System Attributes of an old central would already be
+ // in flash and so this operation needs a flash erase operation.
+ return NRF_ERROR_INVALID_STATE;
+ }
+}
+
+
+uint32_t ble_bondmngr_bonded_centrals_delete(void)
+{
+ VERIFY_MODULE_INITIALIZED();
+
+ m_centrals_in_db_count = 0;
+ m_bond_info_in_flash_count = 0;
+ m_sys_attr_in_flash_count = 0;
+
+ return flash_pages_erase();
+}
+
+
+uint32_t ble_bondmngr_central_addr_get(int8_t central_handle, ble_gap_addr_t * p_central_addr)
+{
+ if (
+ (central_handle == INVALID_CENTRAL_HANDLE) ||
+ (central_handle >= m_centrals_in_db_count) ||
+ (p_central_addr == NULL) ||
+ (
+ m_centrals_db[central_handle].bond.central_addr.addr_type
+ ==
+ BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE
+ )
+ )
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+
+ *p_central_addr = m_centrals_db[central_handle].bond.central_addr;
+ return NRF_SUCCESS;
+}
+
+
+uint32_t ble_bondmngr_whitelist_get(ble_gap_whitelist_t * p_whitelist)
+{
+ static ble_gap_addr_t * s_addr[MAX_NUM_CENTRAL_WHITE_LIST];
+ static ble_gap_irk_t * s_irk[MAX_NUM_CENTRAL_WHITE_LIST];
+
+ int i;
+
+ for (i = 0; i < m_irk_count; i++)
+ {
+ s_irk[i] = m_whitelist_irk[i].p_irk;
+ }
+ for (i = 0; i < m_addr_count; i++)
+ {
+ s_addr[i] = m_whitelist_addr[i].p_addr;
+ }
+
+ p_whitelist->addr_count = m_addr_count;
+ p_whitelist->pp_addrs = (m_addr_count != 0) ? s_addr : NULL;
+ p_whitelist->irk_count = m_irk_count;
+ p_whitelist->pp_irks = (m_irk_count != 0) ? s_irk : NULL;
+
+ return NRF_SUCCESS;
+}
+
+
+static void bm_pstorage_cb_handler(pstorage_handle_t * handle,
+ uint8_t op_code,
+ uint32_t result,
+ uint8_t * p_data,
+ uint32_t data_len)
+{
+ if (result != NRF_SUCCESS)
+ {
+ m_bondmngr_config.error_handler(result);
+ }
+}
+
+
+uint32_t ble_bondmngr_init(ble_bondmngr_init_t * p_init)
+{
+ pstorage_module_param_t param;
+ uint32_t err_code;
+
+ if (p_init->error_handler == NULL)
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+
+ if (BLE_BONDMNGR_MAX_BONDED_CENTRALS > MAX_BONDS_IN_FLASH)
+ {
+ return NRF_ERROR_DATA_SIZE;
+ }
+
+ param.block_size = sizeof (central_bond_t) + sizeof (uint32_t);
+ param.block_count = MAX_BONDS_IN_FLASH;
+ param.cb = bm_pstorage_cb_handler;
+
+ // Blocks are requested twice, once for bond information and once for system attributes.
+ // The number of blocks requested has to be the maximum number of bonded devices that
+ // need to be supported. However, the size of blocks can be different if the sizes of
+ // system attributes and bonds are not too close.
+ err_code = pstorage_register(¶m, &mp_flash_bond_info);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ param.block_size = sizeof(central_sys_attr_t) + sizeof(uint32_t);
+
+ err_code = pstorage_register(¶m, &mp_flash_sys_attr);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ m_bondmngr_config = *p_init;
+
+ memset(&m_central, 0, sizeof(central_t));
+
+ m_central.bond.central_handle = INVALID_CENTRAL_HANDLE;
+ m_conn_handle = BLE_CONN_HANDLE_INVALID;
+ m_centrals_in_db_count = 0;
+ m_bond_info_in_flash_count = 0;
+ m_sys_attr_in_flash_count = 0;
+
+ SECURITY_STATUS_RESET();
+
+ // Erase all stored centrals if specified.
+ if (m_bondmngr_config.bonds_delete)
+ {
+ err_code = flash_pages_erase();
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ m_centrals_in_db_count = 0;
+ int i;
+ for (i = m_centrals_in_db_count; i < BLE_BONDMNGR_MAX_BONDED_CENTRALS; i++)
+ {
+ m_centrals_db[i].bond.central_handle = INVALID_CENTRAL_HANDLE;
+ m_centrals_db[i].sys_attr.sys_attr_size = 0;
+ m_centrals_db[i].sys_attr.central_handle = INVALID_CENTRAL_HANDLE;
+ }
+ }
+ else
+ {
+ // Load bond manager data from flash.
+ err_code = load_all_from_flash();
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ m_is_bondmngr_initialized = true;
+
+ return NRF_SUCCESS;
+}
+
+
+uint32_t ble_bondmngr_central_ids_get(uint16_t * p_central_ids, uint16_t * p_length)
+{
+ VERIFY_MODULE_INITIALIZED();
+ int i;
+ if (p_length == NULL)
+ {
+ return NRF_ERROR_NULL;
+ }
+
+ if (*p_length < m_centrals_in_db_count)
+ {
+ // Length of the input array is not enough to fit all known central identifiers.
+ return NRF_ERROR_DATA_SIZE;
+ }
+
+ *p_length = m_centrals_in_db_count;
+ if (p_central_ids == NULL)
+ {
+ // Only the length field was required to be filled.
+ return NRF_SUCCESS;
+ }
+
+ for (i = 0; i < m_centrals_in_db_count; i++)
+ {
+ p_central_ids[i] = m_centrals_db[i].bond.central_id_info.div;
+ }
+
+ return NRF_SUCCESS;
+}
+
+
+uint32_t ble_bondmngr_bonded_central_delete(uint16_t central_id)
+{
+ VERIFY_MODULE_INITIALIZED();
+
+ int8_t central_handle_to_be_deleted = INVALID_CENTRAL_HANDLE;
+ uint8_t i;
+
+ // Search for the handle of the central.
+ for (i = 0; i < m_centrals_in_db_count; i++)
+ {
+ if (m_centrals_db[i].bond.central_id_info.div == central_id)
+ {
+ central_handle_to_be_deleted = i;
+ break;
+ }
+ }
+
+ if (central_handle_to_be_deleted == INVALID_CENTRAL_HANDLE)
+ {
+ // Central ID not found.
+ return NRF_ERROR_NOT_FOUND;
+ }
+
+ // Delete the central in RAM.
+ for (i = central_handle_to_be_deleted; i < (m_centrals_in_db_count - 1); i++)
+ {
+ // Overwrite the current central entry with the next one.
+ m_centrals_db[i] = m_centrals_db[i + 1];
+
+ // Decrement the value of handle.
+ m_centrals_db[i].bond.central_handle--;
+ if (INVALID_CENTRAL_HANDLE != m_centrals_db[i].sys_attr.central_handle)
+ {
+ m_centrals_db[i].sys_attr.central_handle--;
+ }
+ }
+
+ // Clear the last database entry.
+ memset(&(m_centrals_db[m_centrals_in_db_count - 1]), 0, sizeof(central_t));
+
+ m_centrals_in_db_count--;
+
+ uint32_t err_code;
+
+ // Reinitialize the pointers to the memory where bonding info and System Attributes are stored
+ // in flash.
+ // Refresh the data in the flash memory (both Bonding Information and System Attributes).
+ // Erase and rewrite bonding info and System Attributes.
+
+ err_code = flash_pages_erase();
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ m_bond_info_in_flash_count = 0;
+ m_sys_attr_in_flash_count = 0;
+
+ for (i = 0; i < m_centrals_in_db_count; i++)
+ {
+ err_code = bond_info_store(&(m_centrals_db[i].bond));
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ for (i = 0; i < m_centrals_in_db_count; i++)
+ {
+ err_code = sys_attr_store(&(m_centrals_db[i].sys_attr));
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ update_whitelist();
+
+ return NRF_SUCCESS;
+}
+
+
+uint32_t ble_bondmngr_is_link_encrypted (bool * status)
+{
+ VERIFY_MODULE_INITIALIZED();
+
+ (*status) = ENCRYPTION_STATUS_GET();
+
+ return NRF_SUCCESS;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/ble/ble_conn_params.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/ble/ble_conn_params.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,322 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+#include "ble_conn_params.h"
+#include <stdlib.h>
+#include "nordic_common.h"
+#include "ble_hci.h"
+#include "app_timer.h"
+#include "ble_srv_common.h"
+#include "app_util.h"
+
+
+static ble_conn_params_init_t m_conn_params_config; /**< Configuration as specified by the application. */
+static ble_gap_conn_params_t m_preferred_conn_params; /**< Connection parameters preferred by the application. */
+static uint8_t m_update_count; /**< Number of Connection Parameter Update messages that has currently been sent. */
+static uint16_t m_conn_handle; /**< Current connection handle. */
+static ble_gap_conn_params_t m_current_conn_params; /**< Connection parameters received in the most recent Connect event. */
+static app_timer_id_t m_conn_params_timer_id; /**< Connection parameters timer. */
+
+static bool m_change_param = false;
+
+static bool is_conn_params_ok(ble_gap_conn_params_t * p_conn_params)
+{
+ // Check if interval is within the acceptable range.
+ // NOTE: Using max_conn_interval in the received event data because this contains
+ // the client's connection interval.
+ if (
+ (p_conn_params->max_conn_interval >= m_preferred_conn_params.min_conn_interval)
+ &&
+ (p_conn_params->max_conn_interval <= m_preferred_conn_params.max_conn_interval)
+ )
+ {
+ return true;
+ }
+ else
+ {
+ return false;
+ }
+}
+
+
+static void update_timeout_handler(void * p_context)
+{
+ UNUSED_PARAMETER(p_context);
+
+ if (m_conn_handle != BLE_CONN_HANDLE_INVALID)
+ {
+ // Check if we have reached the maximum number of attempts
+ m_update_count++;
+ if (m_update_count <= m_conn_params_config.max_conn_params_update_count)
+ {
+ uint32_t err_code;
+
+ // Parameters are not ok, send connection parameters update request.
+ err_code = sd_ble_gap_conn_param_update(m_conn_handle, &m_preferred_conn_params);
+ if ((err_code != NRF_SUCCESS) && (m_conn_params_config.error_handler != NULL))
+ {
+ m_conn_params_config.error_handler(err_code);
+ }
+ }
+ else
+ {
+ m_update_count = 0;
+
+ // Negotiation failed, disconnect automatically if this has been configured
+ if (m_conn_params_config.disconnect_on_fail)
+ {
+ uint32_t err_code;
+
+ err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE);
+ if ((err_code != NRF_SUCCESS) && (m_conn_params_config.error_handler != NULL))
+ {
+ m_conn_params_config.error_handler(err_code);
+ }
+ }
+
+ // Notify the application that the procedure has failed
+ if (m_conn_params_config.evt_handler != NULL)
+ {
+ ble_conn_params_evt_t evt;
+
+ evt.evt_type = BLE_CONN_PARAMS_EVT_FAILED;
+ m_conn_params_config.evt_handler(&evt);
+ }
+ }
+ }
+}
+
+
+uint32_t ble_conn_params_init(const ble_conn_params_init_t * p_init)
+{
+ uint32_t err_code;
+
+ m_conn_params_config = *p_init;
+ m_change_param = false;
+ if (p_init->p_conn_params != NULL)
+ {
+ m_preferred_conn_params = *p_init->p_conn_params;
+
+ // Set the connection params in stack
+ err_code = sd_ble_gap_ppcp_set(&m_preferred_conn_params);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+ else
+ {
+ // Fetch the connection params from stack
+ err_code = sd_ble_gap_ppcp_get(&m_preferred_conn_params);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+ }
+
+ m_conn_handle = BLE_CONN_HANDLE_INVALID;
+ m_update_count = 0;
+
+ return app_timer_create(&m_conn_params_timer_id,
+ APP_TIMER_MODE_SINGLE_SHOT,
+ update_timeout_handler);
+}
+
+
+uint32_t ble_conn_params_stop(void)
+{
+ return app_timer_stop(m_conn_params_timer_id);
+}
+
+
+static void conn_params_negotiation(void)
+{
+ // Start negotiation if the received connection parameters are not acceptable
+ if (!is_conn_params_ok(&m_current_conn_params))
+ {
+ uint32_t err_code;
+ uint32_t timeout_ticks;
+
+ if (m_change_param)
+ {
+ // Notify the application that the procedure has failed
+ if (m_conn_params_config.evt_handler != NULL)
+ {
+ ble_conn_params_evt_t evt;
+
+ evt.evt_type = BLE_CONN_PARAMS_EVT_FAILED;
+ m_conn_params_config.evt_handler(&evt);
+ }
+ }
+ else
+ {
+ if (m_update_count == 0)
+ {
+ // First connection parameter update
+ timeout_ticks = m_conn_params_config.first_conn_params_update_delay;
+ }
+ else
+ {
+ timeout_ticks = m_conn_params_config.next_conn_params_update_delay;
+ }
+
+ err_code = app_timer_start(m_conn_params_timer_id, timeout_ticks, NULL);
+ if ((err_code != NRF_SUCCESS) && (m_conn_params_config.error_handler != NULL))
+ {
+ m_conn_params_config.error_handler(err_code);
+ }
+ }
+ }
+ else
+ {
+ // Notify the application that the procedure has succeded
+ if (m_conn_params_config.evt_handler != NULL)
+ {
+ ble_conn_params_evt_t evt;
+
+ evt.evt_type = BLE_CONN_PARAMS_EVT_SUCCEEDED;
+ m_conn_params_config.evt_handler(&evt);
+ }
+ }
+ m_change_param = false;
+}
+
+
+static void on_connect(ble_evt_t * p_ble_evt)
+{
+ // Save connection parameters
+ m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
+ m_current_conn_params = p_ble_evt->evt.gap_evt.params.connected.conn_params;
+ m_update_count = 0; // Connection parameter negotiation should re-start every connection
+
+ // Check if we shall handle negotiation on connect
+ if (m_conn_params_config.start_on_notify_cccd_handle == BLE_GATT_HANDLE_INVALID)
+ {
+ conn_params_negotiation();
+ }
+}
+
+
+static void on_disconnect(ble_evt_t * p_ble_evt)
+{
+ uint32_t err_code;
+
+ m_conn_handle = BLE_CONN_HANDLE_INVALID;
+
+ // Stop timer if running
+ m_update_count = 0; // Connection parameters updates should happen during every connection
+
+ err_code = app_timer_stop(m_conn_params_timer_id);
+ if ((err_code != NRF_SUCCESS) && (m_conn_params_config.error_handler != NULL))
+ {
+ m_conn_params_config.error_handler(err_code);
+ }
+}
+
+
+static void on_write(ble_evt_t * p_ble_evt)
+{
+ ble_gatts_evt_write_t * p_evt_write = &p_ble_evt->evt.gatts_evt.params.write;
+
+ // Check if this the correct CCCD
+ if (
+ (p_evt_write->handle == m_conn_params_config.start_on_notify_cccd_handle)
+ &&
+ (p_evt_write->len == 2)
+ )
+ {
+ // Check if this is a 'start notification'
+ if (ble_srv_is_notification_enabled(p_evt_write->data))
+ {
+ // Do connection parameter negotiation if necessary
+ conn_params_negotiation();
+ }
+ else
+ {
+ uint32_t err_code;
+
+ // Stop timer if running
+ err_code = app_timer_stop(m_conn_params_timer_id);
+ if ((err_code != NRF_SUCCESS) && (m_conn_params_config.error_handler != NULL))
+ {
+ m_conn_params_config.error_handler(err_code);
+ }
+ }
+ }
+}
+
+
+static void on_conn_params_update(ble_evt_t * p_ble_evt)
+{
+ // Copy the parameters
+ m_current_conn_params = p_ble_evt->evt.gap_evt.params.conn_param_update.conn_params;
+
+ conn_params_negotiation();
+}
+
+
+void ble_conn_params_on_ble_evt(ble_evt_t * p_ble_evt)
+{
+ switch (p_ble_evt->header.evt_id)
+ {
+ case BLE_GAP_EVT_CONNECTED:
+ on_connect(p_ble_evt);
+ break;
+
+ case BLE_GAP_EVT_DISCONNECTED:
+ on_disconnect(p_ble_evt);
+ break;
+
+ case BLE_GATTS_EVT_WRITE:
+ on_write(p_ble_evt);
+ break;
+
+ case BLE_GAP_EVT_CONN_PARAM_UPDATE:
+ on_conn_params_update(p_ble_evt);
+ break;
+
+ default:
+ // No implementation needed.
+ break;
+ }
+}
+
+uint32_t ble_conn_params_change_conn_params(ble_gap_conn_params_t *new_params)
+{
+ uint32_t err_code;
+
+ m_preferred_conn_params = *new_params;
+ // Set the connection params in stack
+ err_code = sd_ble_gap_ppcp_set(&m_preferred_conn_params);
+ if (err_code == NRF_SUCCESS)
+ {
+ if (!is_conn_params_ok(&m_current_conn_params))
+ {
+ m_change_param = true;
+ err_code = sd_ble_gap_conn_param_update(m_conn_handle, &m_preferred_conn_params);
+ m_update_count = 1;
+ }
+ else
+ {
+ // Notify the application that the procedure has succeded
+ if (m_conn_params_config.evt_handler != NULL)
+ {
+ ble_conn_params_evt_t evt;
+
+ evt.evt_type = BLE_CONN_PARAMS_EVT_SUCCEEDED;
+ m_conn_params_config.evt_handler(&evt);
+ }
+ err_code = NRF_SUCCESS;
+ }
+ }
+ return err_code;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/ble/ble_debug_assert_handler.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/ble/ble_debug_assert_handler.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,55 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+#include "ble_debug_assert_handler.h"
+#include <string.h>
+#include "nrf51.h"
+#include "ble_error_log.h"
+#include "nordic_common.h"
+
+#define MAX_LENGTH_FILENAME 128 /**< Max length of filename to copy for the debug error handlier. */
+
+
+// WARNING - DO NOT USE THIS FUNCTION IN END PRODUCT. - WARNING
+// WARNING - FOR DEBUG PURPOSES ONLY. - WARNING
+void ble_debug_assert_handler(uint32_t error_code, uint32_t line_num, const uint8_t * p_file_name)
+{
+ // Copying parameters to static variables because parameters may not be accessible in debugger.
+ static volatile uint8_t s_file_name[MAX_LENGTH_FILENAME];
+ static volatile uint16_t s_line_num;
+ static volatile uint32_t s_error_code;
+
+ strncpy((char *)s_file_name, (const char *)p_file_name, MAX_LENGTH_FILENAME - 1);
+ s_file_name[MAX_LENGTH_FILENAME - 1] = '\0';
+ s_line_num = line_num;
+ s_error_code = error_code;
+ UNUSED_VARIABLE(s_file_name);
+ UNUSED_VARIABLE(s_line_num);
+ UNUSED_VARIABLE(s_error_code);
+
+ // WARNING: The PRIMASK register is set to disable ALL interrups during writing the error log.
+ //
+ // Do not use __disable_irq() in normal operation.
+ __disable_irq();
+
+ // This function will write error code, filename, and line number to the flash.
+ // In addition, the Cortex-M0 stack memory will also be written to the flash.
+ //(void) ble_error_log_write(error_code, p_file_name, line_num);
+
+ // For debug purposes, this function never returns.
+ // Attach a debugger for tracing the error cause.
+ for (;;)
+ {
+ // Do nothing.
+ }
+}
+
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/ble/ble_error_log.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/ble/ble_error_log.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,61 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+#include <string.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <nrf51.h>
+#include "ble_error_log.h"
+#include "app_util.h"
+#include "app_error.h"
+#include "nrf_gpio.h"
+#include "pstorage.h"
+
+
+// Made static to avoid the error_log to go on the stack.
+static ble_error_log_data_t m_ble_error_log; /**< . */
+//lint -esym(526,__Vectors)
+extern uint32_t * __Vectors; /**< The initialization vector holds the address to __initial_sp that will be used when fetching the stack. */
+
+static void fetch_stack(ble_error_log_data_t * error_log)
+{
+ // KTOWN: Temporarily removed 06022014
+ /*
+ uint32_t * p_stack;
+ uint32_t * initial_sp;
+ uint32_t length;
+
+ initial_sp = (uint32_t *) __Vectors;
+ p_stack = (uint32_t *) GET_SP();
+
+ length = ((uint32_t) initial_sp) - ((uint32_t) p_stack);
+ memcpy(error_log->stack_info,
+ p_stack,
+ (length > STACK_DUMP_LENGTH) ? STACK_DUMP_LENGTH : length);
+ */
+}
+
+uint32_t ble_error_log_write(uint32_t err_code, const uint8_t * p_message, uint16_t line_number)
+{
+ m_ble_error_log.failure = true;
+ m_ble_error_log.err_code = err_code;
+ m_ble_error_log.line_number = line_number;
+
+ strncpy((char *)m_ble_error_log.message, (const char *)p_message, ERROR_MESSAGE_LENGTH - 1);
+ m_ble_error_log.message[ERROR_MESSAGE_LENGTH - 1] = '\0';
+
+ fetch_stack(&m_ble_error_log);
+
+ // Write to flash removed, to be redone.
+
+ return NRF_SUCCESS;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/ble/ble_services/ble_srv_common.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/ble/ble_services/ble_srv_common.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,41 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/* Attention!
+* To maintain compliance with Nordic Semiconductor ASAs Bluetooth profile
+* qualification listings, this section of source code must not be modified.
+*/
+
+#include "ble_srv_common.h"
+#include <string.h>
+#include "nordic_common.h"
+#include "app_error.h"
+
+
+uint8_t ble_srv_report_ref_encode(uint8_t * p_encoded_buffer,
+ const ble_srv_report_ref_t * p_report_ref)
+{
+ uint8_t len = 0;
+
+ p_encoded_buffer[len++] = p_report_ref->report_id;
+ p_encoded_buffer[len++] = p_report_ref->report_type;
+
+ APP_ERROR_CHECK_BOOL(len == BLE_SRV_ENCODED_REPORT_REF_LEN);
+ return len;
+}
+
+
+void ble_srv_ascii_to_utf8(ble_srv_utf8_str_t * p_utf8, char * p_ascii)
+{
+ p_utf8->length = (uint16_t)strlen(p_ascii);
+ p_utf8->p_str = (uint8_t *)p_ascii;
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/ble_bondmngr_cfg.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/ble_bondmngr_cfg.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,35 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+ /** @cond To make doxygen skip this file */
+
+/** @file
+ *
+ * @defgroup ble_sdk_app_gls_bondmngr_cfg GLS Bond Manager Configuration
+ * @{
+ * @ingroup ble_sdk_app_gls
+ * @brief Definition of bond manager configurable parameters
+ */
+
+#ifndef BLE_BONDMNGR_CFG_H__
+#define BLE_BONDMNGR_CFG_H__
+
+/**@brief Number of CCCDs used in the GLS application. */
+#define BLE_BONDMNGR_CCCD_COUNT 2
+
+/**@brief Maximum number of bonded centrals. */
+#define BLE_BONDMNGR_MAX_BONDED_CENTRALS 7
+
+#endif // BLE_BONDMNGR_CFG_H__
+
+/** @} */
+/** @endcond */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nordic_global.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/BLE_API_Native/hw/nRF51822n/nordic/nordic_global.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,11 @@ +#ifndef _NORDIC_GLOBAL_H_ +#define _NORDIC_GLOBAL_H_ + +/* There are no global defines in mbed, so we need to define */ +/* mandatory conditional compilation flags here */ +#define NRF51 +#define DEBUG_NRF_USER +#define BLE_STACK_SUPPORT_REQD +#define BOARD_PCA10001 + +#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_button.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_button.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,174 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_button Button Handler
+ * @{
+ * @ingroup app_common
+ *
+ * @brief Buttons handling module.
+ *
+ * @details The button handler uses the @ref app_gpiote to detect that a button has been
+ * pushed. To handle debouncing, it will start a timer in the GPIOTE event handler.
+ * The button will only be reported as pushed if the corresponding pin is still active when
+ * the timer expires. If there is a new GPIOTE event while the timer is running, the timer
+ * is restarted.
+ * Use the USE_SCHEDULER parameter of the APP_BUTTON_INIT() macro to select if the
+ * @ref app_scheduler is to be used or not.
+ *
+ * @note The app_button module uses the app_timer module. The user must ensure that the queue in
+ * app_timer is large enough to hold the app_timer_stop() / app_timer_start() operations
+ * which will be executed on each event from GPIOTE module (2 operations), as well as other
+ * app_timer operations queued simultaneously in the application.
+ *
+ * @note Even if the scheduler is not used, app_button.h will include app_scheduler.h, so when
+ * compiling, app_scheduler.h must be available in one of the compiler include paths.
+ */
+
+#ifndef APP_BUTTON_H__
+#define APP_BUTTON_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nordic_global.h"
+#include "nrf.h"
+#include "app_error.h"
+#include "app_scheduler.h"
+#include "nrf_gpio.h"
+
+#define APP_BUTTON_SCHED_EVT_SIZE sizeof(app_button_event_t) /**< Size of button events being passed through the scheduler (is to be used for computing the maximum size of scheduler events). */
+
+/**@brief Button event handler type. */
+typedef void (*app_button_handler_t)(uint8_t pin_no);
+
+/**@brief Type of function for passing events from the Button Handler module to the scheduler. */
+typedef uint32_t (*app_button_evt_schedule_func_t) (app_button_handler_t button_handler,
+ uint8_t pin_no);
+
+/**@brief Button configuration structure. */
+typedef struct
+{
+ uint8_t pin_no; /**< Pin to be used as a button. */
+ bool active_high; /**< TRUE if pin is active high, FALSE otherwise. */
+ nrf_gpio_pin_pull_t pull_cfg; /**< Pull-up or -down configuration. */
+ app_button_handler_t button_handler; /**< Handler to be called when button is pushed. */
+} app_button_cfg_t;
+
+/**@brief Macro for initializing the Button Handler module.
+ *
+ * @details It will initialize the specified pins as buttons, and configure the Button Handler
+ * module as a GPIOTE user (but it will not enable button detection). It will also connect
+ * the Button Handler module to the scheduler (if specified).
+ *
+ * @param[in] BUTTONS Array of buttons to be used (type app_button_cfg_t, must be
+ * static!).
+ * @param[in] BUTTON_COUNT Number of buttons.
+ * @param[in] DETECTION_DELAY Delay from a GPIOTE event until a button is reported as pushed.
+ * @param[in] USE_SCHEDULER TRUE if the application is using the event scheduler,
+ * FALSE otherwise.
+ */
+/*lint -emacro(506, APP_BUTTON_INIT) */ /* Suppress "Constant value Boolean */
+#define APP_BUTTON_INIT(BUTTONS, BUTTON_COUNT, DETECTION_DELAY, USE_SCHEDULER) \
+ do \
+ { \
+ uint32_t ERR_CODE = app_button_init((BUTTONS), \
+ (BUTTON_COUNT), \
+ (DETECTION_DELAY), \
+ (USE_SCHEDULER) ? app_button_evt_schedule : NULL); \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } while (0)
+
+/**@brief Function for initializing the Buttons.
+ *
+ * @details This function will initialize the specified pins as buttons, and configure the Button
+ * Handler module as a GPIOTE user (but it will not enable button detection).
+ *
+ * @note Normally initialization should be done using the APP_BUTTON_INIT() macro, as that will take
+ * care of connecting the Buttons module to the scheduler (if specified).
+ *
+ * @note app_button_enable() function must be called in order to enable the button detection.
+ *
+ * @param[in] p_buttons Array of buttons to be used (NOTE: Must be static!).
+ * @param[in] button_count Number of buttons.
+ * @param[in] detection_delay Delay from a GPIOTE event until a button is reported as pushed.
+ * @param[in] evt_schedule_func Function for passing button events to the scheduler. Point to
+ * app_button_evt_schedule() to connect to the scheduler. Set to
+ * NULL to make the Buttons module call the event handler directly
+ * from the delayed button push detection timeout handler.
+ *
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ */
+uint32_t app_button_init(app_button_cfg_t * p_buttons,
+ uint8_t button_count,
+ uint32_t detection_delay,
+ app_button_evt_schedule_func_t evt_schedule_func);
+
+/**@brief Function for enabling button detection.
+ *
+ * @retval NRF_ERROR_INVALID_PARAM GPIOTE has to many users.
+ * @retval NRF_ERROR_INVALID_STATE Button or GPIOTE not initialized.
+ * @retval NRF_SUCCESS Button detection successfully enabled.
+ */
+uint32_t app_button_enable(void);
+
+/**@brief Function for disabling button detection.
+ *
+ * @retval NRF_ERROR_INVALID_PARAM GPIOTE has to many users.
+ * @retval NRF_ERROR_INVALID_STATE Button or GPIOTE not initialized.
+ * @retval NRF_SUCCESS Button detection successfully enabled.
+ */
+uint32_t app_button_disable(void);
+
+/**@brief Function for checking if a button is currently being pushed.
+ *
+ * @param[in] pin_no Button pin to be checked.
+ * @param[out] p_is_pushed Button state.
+ *
+ * @retval NRF_SUCCESS State successfully read.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid pin_no.
+ */
+uint32_t app_button_is_pushed(uint8_t pin_no, bool * p_is_pushed);
+
+
+// Type and functions for connecting the Buttons module to the scheduler:
+
+/**@cond NO_DOXYGEN */
+typedef struct
+{
+ app_button_handler_t button_handler;
+ uint8_t pin_no;
+} app_button_event_t;
+
+static __INLINE void app_button_evt_get(void * p_event_data, uint16_t event_size)
+{
+ app_button_event_t * p_buttons_event = (app_button_event_t *)p_event_data;
+
+ APP_ERROR_CHECK_BOOL(event_size == sizeof(app_button_event_t));
+ p_buttons_event->button_handler(p_buttons_event->pin_no);
+}
+
+static __INLINE uint32_t app_button_evt_schedule(app_button_handler_t button_handler,
+ uint8_t pin_no)
+{
+ app_button_event_t buttons_event;
+
+ buttons_event.button_handler = button_handler;
+ buttons_event.pin_no = pin_no;
+
+ return app_sched_event_put(&buttons_event, sizeof(buttons_event), app_button_evt_get);
+}
+/**@endcond */
+
+#endif // APP_BUTTON_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_error.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_error.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,78 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_error Common application error handler
+ * @{
+ * @ingroup app_common
+ *
+ * @brief Common application error handler and macros for utilizing a common error handler.
+ */
+
+#ifndef APP_ERROR_H__
+#define APP_ERROR_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nordic_global.h"
+#include "nrf_error.h"
+
+/**@brief Function for error handling, which is called when an error has occurred.
+ *
+ * @param[in] error_code Error code supplied to the handler.
+ * @param[in] line_num Line number where the handler is called.
+ * @param[in] p_file_name Pointer to the file name.
+ */
+void app_error_handler(uint32_t error_code, uint32_t line_num, const uint8_t * p_file_name);
+
+/**@brief Macro for calling error handler function.
+ *
+ * @param[in] ERR_CODE Error code supplied to the error handler.
+ */
+#define APP_ERROR_HANDLER(ERR_CODE) \
+ do \
+ { \
+ app_error_handler((ERR_CODE), __LINE__, (uint8_t*) __FILE__); \
+ } while (0)
+
+/**@brief Macro for calling error handler function if supplied error code any other than NRF_SUCCESS.
+ *
+ * @param[in] ERR_CODE Error code supplied to the error handler.
+ */
+#define APP_ERROR_CHECK(ERR_CODE) \
+ do \
+ { \
+ const uint32_t LOCAL_ERR_CODE = (ERR_CODE); \
+ if (LOCAL_ERR_CODE != NRF_SUCCESS) \
+ { \
+ APP_ERROR_HANDLER(LOCAL_ERR_CODE); \
+ } \
+ } while (0)
+
+/**@brief Macro for calling error handler function if supplied boolean value is false.
+ *
+ * @param[in] BOOLEAN_VALUE Boolean value to be evaluated.
+ */
+#define APP_ERROR_CHECK_BOOL(BOOLEAN_VALUE) \
+ do \
+ { \
+ const bool LOCAL_BOOLEAN_VALUE = (BOOLEAN_VALUE); \
+ if (!LOCAL_BOOLEAN_VALUE) \
+ { \
+ APP_ERROR_HANDLER(0); \
+ } \
+ } while (0)
+
+#endif // APP_ERROR_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_fifo.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_fifo.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,84 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/**@file
+ *
+ * @defgroup app_fifo FIFO implementation
+ * @{
+ * @ingroup app_common
+ *
+ * @brief FIFO implementation.
+ */
+
+#ifndef APP_FIFO_H__
+#define APP_FIFO_H__
+
+#include <stdint.h>
+#include <stdlib.h>
+#include "nordic_global.h"
+#include "nrf_error.h"
+
+/**@brief A FIFO instance structure. Keeps track of which bytes to read and write next.
+ * Also it keeps the information about which memory is allocated for the buffer
+ * and its size. This needs to be initialized by app_fifo_init() before use.
+ */
+typedef struct
+{
+ uint8_t * p_buf; /**< Pointer to FIFO buffer memory. */
+ uint16_t buf_size_mask; /**< Read/write index mask. Also used for size checking. */
+ volatile uint32_t read_pos; /**< Next read position in the FIFO buffer. */
+ volatile uint32_t write_pos; /**< Next write position in the FIFO buffer. */
+} app_fifo_t;
+
+/**@brief Function for initializing the FIFO.
+ *
+ * @param[out] p_fifo FIFO object.
+ * @param[in] p_buf FIFO buffer for storing data. The buffer size has to be a power of two.
+ * @param[in] buf_size Size of the FIFO buffer provided, has to be a power of 2.
+ *
+ * @retval NRF_SUCCESS If initialization was successful.
+ * @retval NRF_ERROR_NULL If a NULL pointer is provided as buffer.
+ * @retval NRF_ERROR_INVALID_LENGTH If size of buffer provided is not a power of two.
+ */
+uint32_t app_fifo_init(app_fifo_t * p_fifo, uint8_t * p_buf, uint16_t buf_size);
+
+/**@brief Function for adding an element to the FIFO.
+ *
+ * @param[in] p_fifo Pointer to the FIFO.
+ * @param[in] byte Data byte to add to the FIFO.
+ *
+ * @retval NRF_SUCCESS If an element has been successfully added to the FIFO.
+ * @retval NRF_ERROR_NO_MEM If the FIFO is full.
+ */
+uint32_t app_fifo_put(app_fifo_t * p_fifo, uint8_t byte);
+
+/**@brief Function for getting the next element from the FIFO.
+ *
+ * @param[in] p_fifo Pointer to the FIFO.
+ * @param[out] p_byte Byte fetched from the FIFO.
+ *
+ * @retval NRF_SUCCESS If an element was returned.
+ * @retval NRF_ERROR_NOT_FOUND If there is no more elements in the queue.
+ */
+uint32_t app_fifo_get(app_fifo_t * p_fifo, uint8_t * p_byte);
+
+/**@brief Function for flushing the FIFO.
+ *
+ * @param[in] p_fifo Pointer to the FIFO.
+ *
+ * @retval NRF_SUCCESS If the FIFO flushed successfully.
+ */
+uint32_t app_fifo_flush(app_fifo_t * p_fifo);
+
+#endif // APP_FIFO_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_gpiote.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_gpiote.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,161 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_gpiote GPIOTE Handler
+ * @{
+ * @ingroup app_common
+ *
+ * @brief GPIOTE handler module.
+ *
+ * @details The GPIOTE handler allows several modules ("users") to share the GPIOTE interrupt,
+ * each user defining a set of pins able to generate events to the user.
+ * When a GPIOTE interrupt occurs, the GPIOTE interrupt handler will call the event handler
+ * of each user for which at least one of the pins generated an event.
+ *
+ * The GPIOTE users are responsible for configuring all their corresponding pins, except
+ * the SENSE field, which should be initialized to GPIO_PIN_CNF_SENSE_Disabled.
+ * The SENSE field will be updated by the GPIOTE module when it is enabled or disabled,
+ * and also while it is enabled.
+ *
+ * The module specifies on which pins events should be generated if the pin(s) goes
+ * from low->high or high->low or both directions.
+ *
+ * @note Even if the application is using the @ref app_scheduler, the GPIOTE event handlers will
+ * be called directly from the GPIOTE interrupt handler.
+ */
+
+#ifndef APP_GPIOTE_H__
+#define APP_GPIOTE_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nordic_global.h"
+#include "nrf.h"
+#include "app_error.h"
+#include "app_util.h"
+
+#define GPIOTE_USER_NODE_SIZE 20 /**< Size of app_gpiote.gpiote_user_t (only for use inside APP_GPIOTE_BUF_SIZE()). */
+#define NO_OF_PINS 32 /**< Number of GPIO pins on the nRF51 chip. */
+
+/**@brief Compute number of bytes required to hold the GPIOTE data structures.
+ *
+ * @param[in] MAX_USERS Maximum number of GPIOTE users.
+ *
+ * @return Required buffer size (in bytes).
+ */
+#define APP_GPIOTE_BUF_SIZE(MAX_USERS) ((MAX_USERS) * GPIOTE_USER_NODE_SIZE)
+
+typedef uint8_t app_gpiote_user_id_t;
+
+/**@brief GPIOTE event handler type. */
+typedef void (*app_gpiote_event_handler_t)(uint32_t event_pins_low_to_high,
+ uint32_t event_pins_high_to_low);
+
+/**@brief Macro for initializing the GPIOTE module.
+ *
+ * @details It will handle dimensioning and allocation of the memory buffer required by the module,
+ * making sure that the buffer is correctly aligned.
+ *
+ * @param[in] MAX_USERS Maximum number of GPIOTE users.
+ *
+ * @note Since this macro allocates a buffer, it must only be called once (it is OK to call it
+ * several times as long as it is from the same location, e.g. to do a reinitialization).
+ */
+/*lint -emacro(506, APP_GPIOTE_INIT) */ /* Suppress "Constant value Boolean */
+#define APP_GPIOTE_INIT(MAX_USERS) \
+ do \
+ { \
+ static uint32_t app_gpiote_buf[CEIL_DIV(APP_GPIOTE_BUF_SIZE(MAX_USERS), sizeof(uint32_t))];\
+ uint32_t ERR_CODE = app_gpiote_init((MAX_USERS), app_gpiote_buf); \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } while (0)
+
+/**@brief Function for initializing the GPIOTE module.
+ *
+ * @note Normally initialization should be done using the APP_GPIOTE_INIT() macro, as that will
+ * allocate the buffer needed by the GPIOTE module (including aligning the buffer correctly).
+ *
+ * @param[in] max_users Maximum number of GPIOTE users.
+ * @param[in] p_buffer Pointer to memory buffer for internal use in the app_gpiote
+ * module. The size of the buffer can be computed using the
+ * APP_GPIOTE_BUF_SIZE() macro. The buffer must be aligned to
+ * a 4 byte boundary.
+ *
+ * @retval NRF_SUCCESS Successful initialization.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter (buffer not aligned to a 4 byte
+ * boundary).
+ */
+uint32_t app_gpiote_init(uint8_t max_users, void * p_buffer);
+
+/**@brief Function for registering a GPIOTE user.
+ *
+ * @param[out] p_user_id Id for the new GPIOTE user.
+ * @param[in] pins_low_to_high_mask Mask defining which pins will generate events to this user
+ * when state is changed from low->high.
+ * @param[in] pins_high_to_low_mask Mask defining which pins will generate events to this user
+ * when state is changed from high->low.
+ * @param[in] event_handler Pointer to function to be executed when an event occurs.
+ *
+ * @retval NRF_SUCCESS Successful initialization.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter (buffer not aligned to a 4 byte boundary).
+ * @retval NRF_ERROR_INALID_STATE If @ref app_gpiote_init has not been called on the GPIOTE
+ * module.
+ * @retval NRF_ERROR_NO_MEM Returned if the application tries to register more users
+ * than defined when the GPIOTE module was initialized in
+ * @ref app_gpiote_init.
+ */
+uint32_t app_gpiote_user_register(app_gpiote_user_id_t * p_user_id,
+ uint32_t pins_low_to_high_mask,
+ uint32_t pins_high_to_low_mask,
+ app_gpiote_event_handler_t event_handler);
+
+/**@brief Function for informing the GPIOTE module that the specified user wants to use the GPIOTE module.
+ *
+ * @param[in] user_id Id of user to enable.
+ *
+ * @retval NRF_SUCCESS On success.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid user_id provided, No a valid user.
+ * @retval NRF_ERROR_INALID_STATE If @ref app_gpiote_init has not been called on the GPIOTE
+ * module.
+ */
+uint32_t app_gpiote_user_enable(app_gpiote_user_id_t user_id);
+
+/**@brief Function for informing the GPIOTE module that the specified user is done using the GPIOTE module.
+ *
+ * @param[in] user_id Id of user to enable.
+ *
+ * @return NRF_SUCCESS On success.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid user_id provided, No a valid user.
+ * @retval NRF_ERROR_INALID_STATE If @ref app_gpiote_init has not been called on the GPIOTE
+ * module.
+ */
+uint32_t app_gpiote_user_disable(app_gpiote_user_id_t user_id);
+
+/**@brief Function for getting the state of the pins which are registered for the specified user.
+ *
+ * @param[in] user_id Id of user to check.
+ * @param[out] p_pins Bit mask corresponding to the pins configured to generate events to
+ * the specified user. All bits corresponding to pins in the state
+ * 'high' will have value '1', all others will have value '0'.
+ *
+ * @return NRF_SUCCESS On success.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid user_id provided, No a valid user.
+ * @retval NRF_ERROR_INALID_STATE If @ref app_gpiote_init has not been called on the GPIOTE
+ * module.
+ */
+uint32_t app_gpiote_pins_state_get(app_gpiote_user_id_t user_id, uint32_t * p_pins);
+
+#endif // APP_GPIOTE_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_scheduler.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_scheduler.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,135 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_scheduler Scheduler
+ * @{
+ * @ingroup app_common
+ *
+ * @brief The scheduler is used for transferring execution from the interrupt context to the main
+ * context.
+ *
+ * @details See @ref ble_sdk_apps_seq_diagrams for sequence diagrams illustrating the flow of events
+ * when using the Scheduler.
+ *
+ * @section app_scheduler_req Requirements:
+ *
+ * @subsection main_context_logic Logic in main context:
+ *
+ * - Define an event handler for each type of event expected.
+ * - Initialize the scheduler by calling the APP_SCHED_INIT() macro before entering the
+ * application main loop.
+ * - Call app_sched_execute() from the main loop each time the application wakes up because of an
+ * event (typically when sd_app_evt_wait() returns).
+ *
+ * @subsection int_context_logic Logic in interrupt context:
+ *
+ * - In the interrupt handler, call app_sched_event_put()
+ * with the appropriate data and event handler. This will insert an event into the
+ * scheduler's queue. The app_sched_execute() function will pull this event and call its
+ * handler in the main context.
+ *
+ * For an example usage of the scheduler, please see the implementations of
+ * @ref ble_sdk_app_hids_mouse and @ref ble_sdk_app_hids_keyboard.
+ *
+ * @image html scheduler_working.jpg The high level design of the scheduler
+ */
+
+#ifndef APP_SCHEDULER_H__
+#define APP_SCHEDULER_H__
+
+#include <stdint.h>
+#include "nordic_global.h"
+#include "app_error.h"
+
+#define APP_SCHED_EVENT_HEADER_SIZE 8 /**< Size of app_scheduler.event_header_t (only for use inside APP_SCHED_BUF_SIZE()). */
+
+/**@brief Compute number of bytes required to hold the scheduler buffer.
+ *
+ * @param[in] EVENT_SIZE Maximum size of events to be passed through the scheduler.
+ * @param[in] QUEUE_SIZE Number of entries in scheduler queue (i.e. the maximum number of events
+ * that can be scheduled for execution).
+ *
+ * @return Required scheduler buffer size (in bytes).
+ */
+#define APP_SCHED_BUF_SIZE(EVENT_SIZE, QUEUE_SIZE) \
+ (((EVENT_SIZE) + APP_SCHED_EVENT_HEADER_SIZE) * ((QUEUE_SIZE) + 1))
+
+/**@brief Scheduler event handler type. */
+typedef void (*app_sched_event_handler_t)(void * p_event_data, uint16_t event_size);
+
+/**@brief Macro for initializing the event scheduler.
+ *
+ * @details It will also handle dimensioning and allocation of the memory buffer required by the
+ * scheduler, making sure the buffer is correctly aligned.
+ *
+ * @param[in] EVENT_SIZE Maximum size of events to be passed through the scheduler.
+ * @param[in] QUEUE_SIZE Number of entries in scheduler queue (i.e. the maximum number of events
+ * that can be scheduled for execution).
+ *
+ * @note Since this macro allocates a buffer, it must only be called once (it is OK to call it
+ * several times as long as it is from the same location, e.g. to do a reinitialization).
+ */
+#define APP_SCHED_INIT(EVENT_SIZE, QUEUE_SIZE) \
+ do \
+ { \
+ static uint32_t APP_SCHED_BUF[CEIL_DIV(APP_SCHED_BUF_SIZE((EVENT_SIZE), (QUEUE_SIZE)), \
+ sizeof(uint32_t))]; \
+ uint32_t ERR_CODE = app_sched_init((EVENT_SIZE), (QUEUE_SIZE), APP_SCHED_BUF); \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } while (0)
+
+/**@brief Function for initializing the Scheduler.
+ *
+ * @details It must be called before entering the main loop.
+ *
+ * @param[in] max_event_size Maximum size of events to be passed through the scheduler.
+ * @param[in] queue_size Number of entries in scheduler queue (i.e. the maximum number of
+ * events that can be scheduled for execution).
+ * @param[in] p_event_buffer Pointer to memory buffer for holding the scheduler queue. It must
+ * be dimensioned using the APP_SCHED_BUFFER_SIZE() macro. The buffer
+ * must be aligned to a 4 byte boundary.
+ *
+ * @note Normally initialization should be done using the APP_SCHED_INIT() macro, as that will both
+ * allocate the scheduler buffer, and also align the buffer correctly.
+ *
+ * @retval NRF_SUCCESS Successful initialization.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter (buffer not aligned to a 4 byte
+ * boundary).
+ */
+uint32_t app_sched_init(uint16_t max_event_size, uint16_t queue_size, void * p_evt_buffer);
+
+/**@brief Function for executing all scheduled events.
+ *
+ * @details This function must be called from within the main loop. It will execute all events
+ * scheduled since the last time it was called.
+ */
+void app_sched_execute(void);
+
+/**@brief Function for scheduling an event.
+ *
+ * @details Puts an event into the event queue.
+ *
+ * @param[in] p_event_data Pointer to event data to be scheduled.
+ * @param[in] p_event_size Size of event data to be scheduled.
+ * @param[in] handler Event handler to receive the event.
+ *
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ */
+uint32_t app_sched_event_put(void * p_event_data,
+ uint16_t event_size,
+ app_sched_event_handler_t handler);
+
+#endif // APP_SCHEDULER_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_timer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_timer.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,294 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_timer Application Timer
+ * @{
+ * @ingroup app_common
+ *
+ * @brief Application timer functionality.
+ *
+ * @details It enables the application to create multiple timer instances based on the RTC1
+ * peripheral. Checking for timeouts and invokation of user timeout handlers is performed
+ * in the RTC1 interrupt handler. List handling is done using a software interrupt (SWI0).
+ * Both interrupt handlers are running in APP_LOW priority level.
+ *
+ * @note When calling app_timer_start() or app_timer_stop(), the timer operation is just queued,
+ * and the software interrupt is triggered. The actual timer start/stop operation is
+ * executed by the SWI0 interrupt handler. Since the SWI0 interrupt is running in APP_LOW,
+ * if the application code calling the timer function is running in APP_LOW or APP_HIGH,
+ * the timer operation will not be performed until the application handler has returned.
+ * This will be the case e.g. when stopping a timer from a timeout handler when not using
+ * the scheduler.
+ *
+ * @details Use the USE_SCHEDULER parameter of the APP_TIMER_INIT() macro to select if the
+ * @ref app_scheduler is to be used or not.
+ *
+ * @note Even if the scheduler is not used, app_timer.h will include app_scheduler.h, so when
+ * compiling, app_scheduler.h must be available in one of the compiler include paths.
+ */
+
+#ifndef APP_TIMER_H__
+#define APP_TIMER_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include "nordic_global.h"
+#include "app_error.h"
+#include "app_util.h"
+#include "app_scheduler.h"
+#include "compiler_abstraction.h"
+
+#define APP_TIMER_SCHED_EVT_SIZE sizeof(app_timer_event_t) /**< Size of button events being passed through the scheduler (is to be used for computing the maximum size of scheduler events). */
+#define APP_TIMER_CLOCK_FREQ 32768 /**< Clock frequency of the RTC timer used to implement the app timer module. */
+#define APP_TIMER_MIN_TIMEOUT_TICKS 5 /**< Minimum value of the timeout_ticks parameter of app_timer_start(). */
+
+#define APP_TIMER_NODE_SIZE 40 /**< Size of app_timer.timer_node_t (only for use inside APP_TIMER_BUF_SIZE()). */
+#define APP_TIMER_USER_OP_SIZE 24 /**< Size of app_timer.timer_user_op_t (only for use inside APP_TIMER_BUF_SIZE()). */
+#define APP_TIMER_USER_SIZE 8 /**< Size of app_timer.timer_user_t (only for use inside APP_TIMER_BUF_SIZE()). */
+#define APP_TIMER_INT_LEVELS 3 /**< Number of interrupt levels from where timer operations may be initiated (only for use inside APP_TIMER_BUF_SIZE()). */
+
+/**@brief Compute number of bytes required to hold the application timer data structures.
+ *
+ * @param[in] MAX_TIMERS Maximum number of timers that can be created at any given time.
+ * @param[in] OP_QUEUE_SIZE Size of queues holding timer operations that are pending execution.
+ * NOTE: Due to the queue implementation, this size must be one more
+ * than the size that is actually needed.
+ *
+ * @return Required application timer buffer size (in bytes).
+ */
+#define APP_TIMER_BUF_SIZE(MAX_TIMERS, OP_QUEUE_SIZE) \
+ ( \
+ ((MAX_TIMERS) * APP_TIMER_NODE_SIZE) \
+ + \
+ ( \
+ APP_TIMER_INT_LEVELS \
+ * \
+ (APP_TIMER_USER_SIZE + ((OP_QUEUE_SIZE) + 1) * APP_TIMER_USER_OP_SIZE) \
+ ) \
+ )
+
+/**@brief Convert milliseconds to timer ticks.
+ *
+ * @note This macro uses 64 bit integer arithmetic, but as long as the macro parameters are
+ * constants (i.e. defines), the computation will be done by the preprocessor.
+ *
+ * @param[in] MS Milliseconds.
+ * @param[in] PRESCALER Value of the RTC1 PRESCALER register (must be the same value that was
+ * passed to APP_TIMER_INIT()).
+ *
+ * @note When using this macro, it is the responsibility of the developer to ensure that the
+ * values provided as input result in an output value that is supported by the
+ * @ref app_timer_start function. For example, when the ticks for 1 ms is needed, the
+ * maximum possible value of PRESCALER must be 6, when @ref APP_TIMER_CLOCK_FREQ is 32768.
+ * This will result in a ticks value as 5. Any higher value for PRESCALER will result in a
+ * ticks value that is not supported by this module.
+ *
+ * @return Number of timer ticks.
+ */
+#define APP_TIMER_TICKS(MS, PRESCALER)\
+ ((uint32_t)ROUNDED_DIV((MS) * (uint64_t)APP_TIMER_CLOCK_FREQ, ((PRESCALER) + 1) * 1000))
+
+/**@brief Timer id type. */
+typedef uint32_t app_timer_id_t;
+
+/**@brief Application timeout handler type. */
+typedef void (*app_timer_timeout_handler_t)(void * p_context);
+
+/**@brief Type of function for passing events from the timer module to the scheduler. */
+typedef uint32_t (*app_timer_evt_schedule_func_t) (app_timer_timeout_handler_t timeout_handler,
+ void * p_context);
+
+/**@brief Timer modes. */
+typedef enum
+{
+ APP_TIMER_MODE_SINGLE_SHOT, /**< The timer will expire only once. */
+ APP_TIMER_MODE_REPEATED /**< The timer will restart each time it expires. */
+} app_timer_mode_t;
+
+/**@brief Macro for initializing the application timer module.
+ *
+ * @details It will handle dimensioning and allocation of the memory buffer required by the timer,
+ * making sure that the buffer is correctly aligned. It will also connect the timer module
+ * to the scheduler (if specified).
+ *
+ * @param[in] PRESCALER Value of the RTC1 PRESCALER register. This will decide the
+ * timer tick rate. Set to 0 for no prescaling.
+ * @param[in] MAX_TIMERS Maximum number of timers that can be created at any given time.
+ * @param[in] OP_QUEUES_SIZE Size of queues holding timer operations that are pending execution.
+ * @param[in] USE_SCHEDULER TRUE if the application is using the event scheduler,
+ * FALSE otherwise.
+ *
+ * @note Since this macro allocates a buffer, it must only be called once (it is OK to call it
+ * several times as long as it is from the same location, e.g. to do a reinitialization).
+ */
+/*lint -emacro(506, APP_TIMER_INIT) */ /* Suppress "Constant value Boolean */
+#define APP_TIMER_INIT(PRESCALER, MAX_TIMERS, OP_QUEUES_SIZE, USE_SCHEDULER) \
+ do \
+ { \
+ static uint32_t APP_TIMER_BUF[CEIL_DIV(APP_TIMER_BUF_SIZE((MAX_TIMERS), \
+ (OP_QUEUES_SIZE) + 1), \
+ sizeof(uint32_t))]; \
+ uint32_t ERR_CODE = app_timer_init((PRESCALER), \
+ (MAX_TIMERS), \
+ (OP_QUEUES_SIZE) + 1, \
+ APP_TIMER_BUF, \
+ (USE_SCHEDULER) ? app_timer_evt_schedule : NULL); \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } while (0)
+
+/**@brief Function for initializing the timer module.
+ *
+ * @note Normally initialization should be done using the APP_TIMER_INIT() macro, as that will both
+ * allocate the buffers needed by the timer module (including aligning the buffers correctly,
+ * and also take care of connecting the timer module to the scheduler (if specified).
+ *
+ * @param[in] prescaler Value of the RTC1 PRESCALER register. Set to 0 for no prescaling.
+ * @param[in] max_timers Maximum number of timers that can be created at any given time.
+ * @param[in] op_queues_size Size of queues holding timer operations that are pending
+ * execution. NOTE: Due to the queue implementation, this size must
+ * be one more than the size that is actually needed.
+ * @param[in] p_buffer Pointer to memory buffer for internal use in the app_timer
+ * module. The size of the buffer can be computed using the
+ * APP_TIMER_BUF_SIZE() macro. The buffer must be aligned to a
+ * 4 byte boundary.
+ * @param[in] evt_schedule_func Function for passing timeout events to the scheduler. Point to
+ * app_timer_evt_schedule() to connect to the scheduler. Set to NULL
+ * to make the timer module call the timeout handler directly from
+ * the timer interrupt handler.
+ *
+ * @retval NRF_SUCCESS Successful initialization.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter (buffer not aligned to a 4 byte
+ * boundary or NULL).
+ */
+uint32_t app_timer_init(uint32_t prescaler,
+ uint8_t max_timers,
+ uint8_t op_queues_size,
+ void * p_buffer,
+ app_timer_evt_schedule_func_t evt_schedule_func);
+
+/**@brief Function for creating a timer instance.
+ *
+ * @param[out] p_timer_id Id of the newly created timer.
+ * @param[in] mode Timer mode.
+ * @param[in] timeout_handler Function to be executed when the timer expires.
+ *
+ * @retval NRF_SUCCESS Timer was successfully created.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter.
+ * @retval NRF_ERROR_INVALID_STATE Application timer module has not been initialized.
+ * @retval NRF_ERROR_NO_MEM Maximum number of timers has already been reached.
+ *
+ * @note This function does the timer allocation in the caller's context. It is also not protected
+ * by a critical region. Therefore care must be taken not to call it from several interrupt
+ * levels simultaneously.
+ */
+uint32_t app_timer_create(app_timer_id_t * p_timer_id,
+ app_timer_mode_t mode,
+ app_timer_timeout_handler_t timeout_handler);
+
+/**@brief Function for starting a timer.
+ *
+ * @param[in] timer_id Id of timer to start.
+ * @param[in] timeout_ticks Number of ticks (of RTC1, including prescaling) to timeout event
+ * (minimum 5 ticks).
+ * @param[in] p_context General purpose pointer. Will be passed to the timeout handler when
+ * the timer expires.
+ *
+ * @retval NRF_SUCCESS Timer was successfully started.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter.
+ * @retval NRF_ERROR_INVALID_STATE Application timer module has not been initialized, or timer
+ * has not been created.
+ * @retval NRF_ERROR_NO_MEM Timer operations queue was full.
+ *
+ * @note The minimum timeout_ticks value is 5.
+ * @note For multiple active timers, timeouts occurring in close proximity to each other (in the
+ * range of 1 to 3 ticks) will have a positive jitter of maximum 3 ticks.
+ * @note When calling this method on a timer which is already running, the second start operation
+ * will be ignored.
+ */
+uint32_t app_timer_start(app_timer_id_t timer_id, uint32_t timeout_ticks, void * p_context);
+
+/**@brief Function for stopping the specified timer.
+ *
+ * @param[in] timer_id Id of timer to stop.
+ *
+ * @retval NRF_SUCCESS Timer was successfully stopped.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter.
+ * @retval NRF_ERROR_INVALID_STATE Application timer module has not been initialized, or timer
+ * has not been created.
+ * @retval NRF_ERROR_NO_MEM Timer operations queue was full.
+ */
+uint32_t app_timer_stop(app_timer_id_t timer_id);
+
+/**@brief Function for stopping all running timers.
+ *
+ * @retval NRF_SUCCESS All timers were successfully stopped.
+ * @retval NRF_ERROR_INVALID_STATE Application timer module has not been initialized.
+ * @retval NRF_ERROR_NO_MEM Timer operations queue was full.
+ */
+uint32_t app_timer_stop_all(void);
+
+/**@brief Function for returning the current value of the RTC1 counter.
+ *
+ * @param[out] p_ticks Current value of the RTC1 counter.
+ *
+ * @retval NRF_SUCCESS Counter was successfully read.
+ */
+uint32_t app_timer_cnt_get(uint32_t * p_ticks);
+
+/**@brief Function for computing the difference between two RTC1 counter values.
+ *
+ * @param[in] ticks_to Value returned by app_timer_cnt_get().
+ * @param[in] ticks_from Value returned by app_timer_cnt_get().
+ * @param[out] p_ticks_diff Number of ticks from ticks_from to ticks_to.
+ *
+ * @retval NRF_SUCCESS Counter difference was successfully computed.
+ */
+uint32_t app_timer_cnt_diff_compute(uint32_t ticks_to,
+ uint32_t ticks_from,
+ uint32_t * p_ticks_diff);
+
+
+// Type and functions for connecting the timer to the scheduler:
+
+/**@cond NO_DOXYGEN */
+typedef struct
+{
+ app_timer_timeout_handler_t timeout_handler;
+ void * p_context;
+} app_timer_event_t;
+
+static __INLINE void app_timer_evt_get(void * p_event_data, uint16_t event_size)
+{
+ app_timer_event_t * p_timer_event = (app_timer_event_t *)p_event_data;
+
+ APP_ERROR_CHECK_BOOL(event_size == sizeof(app_timer_event_t));
+ p_timer_event->timeout_handler(p_timer_event->p_context);
+}
+
+static __INLINE uint32_t app_timer_evt_schedule(app_timer_timeout_handler_t timeout_handler,
+ void * p_context)
+{
+ app_timer_event_t timer_event;
+
+ timer_event.timeout_handler = timeout_handler;
+ timer_event.p_context = p_context;
+
+ return app_sched_event_put(&timer_event, sizeof(timer_event), app_timer_evt_get);
+}
+/**@endcond */
+
+#endif // APP_TIMER_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_uart.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_uart.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,285 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/**@file
+ *
+ * @defgroup app_uart UART module
+ * @{
+ * @ingroup app_common
+ *
+ * @brief UART module interface.
+ */
+
+#ifndef APP_UART_H__
+#define APP_UART_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nordic_global.h"
+#include "app_util.h"
+
+#define UART_PIN_DISCONNECTED 0xFFFFFFFF /**< Value indicating that no pin is connected to this UART register. */
+
+/**@brief UART Flow Control modes for the peripheral.
+ */
+typedef enum
+{
+ APP_UART_FLOW_CONTROL_DISABLED, /**< UART Hw Flow Control is disabled. */
+ APP_UART_FLOW_CONTROL_ENABLED, /**< Standard UART Hw Flow Control is enabled. */
+ APP_UART_FLOW_CONTROL_LOW_POWER /**< Specialized UART Hw Flow Control is used. The Low Power setting allows the nRF51 to Power Off the UART module when CTS is in-active, and re-enabling the UART when the CTS signal becomes active. This allows the nRF51 to safe power by only using the UART module when it is needed by the remote site. */
+} app_uart_flow_control_t;
+
+/**@brief UART communication structure holding configuration settings for the peripheral.
+ */
+typedef struct
+{
+ uint8_t rx_pin_no; /**< RX pin number. */
+ uint8_t tx_pin_no; /**< TX pin number. */
+ uint8_t rts_pin_no; /**< RTS pin number, only used if flow control is enabled. */
+ uint8_t cts_pin_no; /**< CTS pin number, only used if flow control is enabled. */
+ app_uart_flow_control_t flow_control; /**< Flow control setting, if flow control is used, the system will use low power UART mode, based on CTS signal. */
+ bool use_parity; /**< Even parity if TRUE, no parity if FALSE. */
+ uint32_t baud_rate; /**< Baud rate configuration. */
+} app_uart_comm_params_t;
+
+/**@brief UART buffer for transmitting/receiving data.
+ */
+typedef struct
+{
+ uint8_t * rx_buf; /**< Pointer to the RX buffer. */
+ uint32_t rx_buf_size; /**< Size of the RX buffer. */
+ uint8_t * tx_buf; /**< Pointer to the TX buffer. */
+ uint32_t tx_buf_size; /**< Size of the TX buffer. */
+} app_uart_buffers_t;
+
+/**@brief Enumeration describing current state of the UART.
+ *
+ * @details The connection state can be fetched by the application using the function call
+ * @ref app_uart_get_connection_state.
+ * When hardware flow control is used
+ * - APP_UART_CONNECTED: Communication is ongoing.
+ * - APP_UART_DISCONNECTED: No communication is ongoing.
+ *
+ * When no hardware flow control is used
+ * - APP_UART_CONNECTED: Always returned as bytes can always be received/transmitted.
+ */
+typedef enum
+{
+ APP_UART_DISCONNECTED, /**< State indicating that the UART is disconnected and cannot receive or transmit bytes. */
+ APP_UART_CONNECTED /**< State indicating that the UART is connected and ready to receive or transmit bytes. If flow control is disabled, the state will always be connected. */
+} app_uart_connection_state_t;
+
+/**@brief Enumeration which defines events used by the UART module upon data reception or error.
+ *
+ * @details The event type is used to indicate the type of additional information in the event
+ * @ref app_uart_evt_t.
+ */
+typedef enum
+{
+ APP_UART_DATA_READY, /**< An event indicating that UART data has been received. The data is available in the FIFO and can be fetched using @ref app_uart_get. */
+ APP_UART_FIFO_ERROR, /**< An error in the FIFO module used by the app_uart module has occured. The FIFO error code is stored in app_uart_evt_t.data.error_code field. */
+ APP_UART_COMMUNICATION_ERROR, /**< An communication error has occured during reception. The error is stored in app_uart_evt_t.data.error_communication field. */
+ APP_UART_TX_EMPTY, /**< An event indicating that UART has completed transmission of all available data in the TX FIFO. */
+ APP_UART_DATA, /**< An event indicating that UART data has been received, and data is present in data field. This event is only used when no FIFO is configured. */
+} app_uart_evt_type_t;
+
+/**@brief Struct containing events from the UART module.
+ *
+ * @details The app_uart_evt_t is used to notify the application of asynchronous events when data
+ * are received on the UART peripheral or in case an error occured during data reception.
+ */
+typedef struct
+{
+ app_uart_evt_type_t evt_type; /**< Type of event. */
+ union
+ {
+ uint32_t error_communication;/**< Field used if evt_type is: APP_UART_COMMUNICATION_ERROR. This field contains the value in the ERRORSRC register for the UART peripheral. The UART_ERRORSRC_x defines from @ref nrf51_bitfields.h can be used to parse the error code. See also the nRF51 Series Reference Manual for specification. */
+ uint32_t error_code; /**< Field used if evt_type is: NRF_ERROR_x. Additional status/error code if the error event type is APP_UART_FIFO_ERROR. This error code refer to errors defined in nrf_error.h. */
+ uint8_t value; /**< Field used if evt_type is: NRF_ERROR_x. Additional status/error code if the error event type is APP_UART_FIFO_ERROR. This error code refer to errors defined in nrf_error.h. */
+ } data;
+} app_uart_evt_t;
+
+/**@brief Function for handling app_uart event callback.
+ *
+ * @details Upon an event in the app_uart module this callback function will be called to notify
+ * the applicatioon about the event.
+ *
+ * @param[in] p_app_uart_event Pointer to UART event.
+ */
+typedef void (*app_uart_event_handler_t) (app_uart_evt_t * p_app_uart_event);
+
+/**@brief Macro for safe initialization of the UART module in a single user instance when using
+ * a FIFO together with UART.
+ *
+ * @param[in] P_COMM_PARAMS Pointer to a UART communication structure: app_uart_comm_params_t
+ * @param[in] RX_BUF_SIZE Size of desired RX buffer, must be a power of 2 or ZERO (No FIFO).
+ * @param[in] TX_BUF_SIZE Size of desired TX buffer, must be a power of 2 or ZERO (No FIFO).
+ * @param[in] EVENT_HANDLER Event handler function to be called when an event occurs in the
+ * UART module.
+ * @param[in] IRQ_PRIO IRQ priority, app_irq_priority_t, for the UART module irq handler.
+ * @param[out] ERR_CODE The return value of the UART initialization function will be
+ * written to this parameter.
+ *
+ * @note Since this macro allocates a buffer and registers the module as a GPIOTE user when flow
+ * control is enabled, it must only be called once.
+ */
+#define APP_UART_FIFO_INIT(P_COMM_PARAMS, RX_BUF_SIZE, TX_BUF_SIZE, EVT_HANDLER, IRQ_PRIO, ERR_CODE)\
+ do \
+ { \
+ uint16_t APP_UART_UID = 0; \
+ app_uart_buffers_t buffers; \
+ static uint8_t rx_buf[RX_BUF_SIZE]; \
+ static uint8_t tx_buf[TX_BUF_SIZE]; \
+ \
+ buffers.rx_buf = rx_buf; \
+ buffers.rx_buf_size = sizeof(rx_buf); \
+ buffers.tx_buf = tx_buf; \
+ buffers.tx_buf_size = sizeof(tx_buf); \
+ ERR_CODE = app_uart_init(P_COMM_PARAMS, &buffers, EVT_HANDLER, IRQ_PRIO, &APP_UART_UID); \
+ } while (0)
+
+/**@brief Macro for safe initialization of the UART module in a single user instance.
+ *
+ * @param[in] P_COMM_PARAMS Pointer to a UART communication structure: app_uart_comm_params_t
+ * @param[in] EVENT_HANDLER Event handler function to be called when an event occurs in the
+ * UART module.
+ * @param[in] IRQ_PRIO IRQ priority, app_irq_priority_t, for the UART module irq handler.
+ * @param[out] ERR_CODE The return value of the UART initialization function will be
+ * written to this parameter.
+ *
+ * @note Since this macro allocates registers the module as a GPIOTE user when flow control is
+ * enabled, it must only be called once.
+ */
+#define APP_UART_INIT(P_COMM_PARAMS, EVT_HANDLER, IRQ_PRIO, ERR_CODE) \
+ do \
+ { \
+ uint16_t APP_UART_UID = 0; \
+ ERR_CODE = app_uart_init(P_COMM_PARAMS, NULL, EVT_HANDLER, IRQ_PRIO, &APP_UART_UID); \
+ } while (0)
+
+/**@brief Function for initializing the UART module. Use this initialization when several instances of the UART
+ * module are needed.
+ *
+ * @details This initialization will return a UART user id for the caller. The UART user id must be
+ * used upon re-initialization of the UART or closing of the module for the user.
+ * If single instance usage is needed, the APP_UART_INIT() macro should be used instead.
+ *
+ * @note Normally single instance initialization should be done using the APP_UART_INIT() or
+ * APP_UART_INIT_FIFO() macro depending on whether the FIFO should be used by the UART, as
+ * that will allocate the buffers needed by the UART module (including aligning the buffer
+ * correctly).
+
+ * @param[in] p_comm_params Pin and communication parameters.
+ * @param[in] p_buffers RX and TX buffers, NULL is FIFO is not used.
+ * @param[in] error_handler Function to be called in case of an error.
+ * @param[in] app_irq_priority Interrupt priority level.
+ * @param[in,out] p_uart_uid User id for the UART module. The p_uart_uid must be used if
+ * re-initialization and/or closing of the UART module is needed.
+ * If the value pointed to by p_uart_uid is zero, this is
+ * considdered a first time initialization. Otherwise this is
+ * considered a re-initialization for the user with id *p_uart_uid.
+ *
+ * @retval NRF_SUCCESS If successful initialization.
+ * @retval NRF_ERROR_INVALID_LENGTH If a provided buffer is not a power of two.
+ * @retval NRF_ERROR_NULL If one of the provided buffers is a NULL pointer.
+ *
+ * Those errors are propagated by the UART module to the caller upon registration when Hardware Flow
+ * Control is enabled. When Hardware Flow Control is not used, those errors cannot occur.
+ * @retval NRF_ERROR_INVALID_STATE The GPIOTE module is not in a valid state when registering
+ * the UART module as a user.
+ * @retval NRF_ERROR_INVALID_PARAM The UART module provides an invalid callback function when
+ * registering the UART module as a user.
+ * Or the value pointed to by *p_uart_uid is not a valid
+ * GPIOTE number.
+ * @retval NRF_ERROR_NO_MEM GPIOTE module has reached the maximum number of users.
+ */
+uint32_t app_uart_init(const app_uart_comm_params_t * p_comm_params,
+ app_uart_buffers_t * p_buffers,
+ app_uart_event_handler_t error_handler,
+ app_irq_priority_t irq_priority,
+ uint16_t * p_uart_uid);
+
+/**@brief Function for getting a byte from the UART.
+ *
+ * @details This function will get the next byte from the RX buffer. If the RX buffer is empty
+ * an error code will be returned and the app_uart module will generate an event upon
+ * reception of the first byte which is added to the RX buffer.
+ *
+ * @param[out] p_byte Pointer to an address where next byte received on the UART will be copied.
+ *
+ * @retval NRF_SUCCESS If a byte has been received and pushed to the pointer provided.
+ * @retval NRF_ERROR_NOT_FOUND If no byte is available in the RX buffer of the app_uart module.
+ */
+uint32_t app_uart_get(uint8_t * p_byte);
+
+/**@brief Function for putting a byte on the UART.
+ *
+ * @details This call is non-blocking.
+ *
+ * @param[in] byte Byte to be transmitted on the UART.
+ *
+ * @retval NRF_SUCCESS If the byte was succesfully put on the TX buffer for transmission.
+ * @retval NRF_ERROR_NO_MEM If no more space is available in the TX buffer.
+ * NRF_ERROR_NO_MEM may occur if flow control is enabled and CTS signal
+ * is high for a long period and the buffer fills up.
+ */
+uint32_t app_uart_put(uint8_t byte);
+
+/**@brief Function for getting the current state of the UART.
+ *
+ * @details If flow control is disabled, the state is assumed to always be APP_UART_CONNECTED.
+ *
+ * When using flow control the state will be controlled by the CTS. If CTS is set active
+ * by the remote side, or the app_uart module is in the process of transmitting a byte,
+ * app_uart is in APP_UART_CONNECTED state. If CTS is set inactive by remote side app_uart
+ * will not get into APP_UART_DISCONNECTED state until the last byte in the TXD register
+ * is fully transmitted.
+ *
+ * Internal states in the state machine are mapped to the general connected/disconnected
+ * states in the following ways:
+ *
+ * - UART_ON = CONNECTED
+ * - UART_READY = CONNECTED
+ * - UART_WAIT = CONNECTED
+ * - UART_OFF = DISCONNECTED.
+ *
+ * @param[out] p_connection_state Current connection state of the UART.
+ *
+ * @retval NRF_SUCCESS The connection state was succesfully retrieved.
+ */
+uint32_t app_uart_get_connection_state(app_uart_connection_state_t * p_connection_state);
+
+/**@brief Function for flushing the RX and TX buffers (Only valid if FIFO is used).
+ * This function does nothing if FIFO is not used.
+ *
+ * @retval NRF_SUCCESS Flushing completed (Current implementation will always succeed).
+ */
+uint32_t app_uart_flush(void);
+
+/**@brief Function for closing the UART module.
+ *
+ * @details This function will close any on-going UART transmissions and disable itself in the
+ * GPTIO module.
+ *
+ * @param[in] app_uart_uid User id for the UART module. The app_uart_uid must be identical to the
+ * UART id returned on initialization and which is currently in use.
+
+ * @retval NRF_SUCCESS If successfully closed.
+ * @retval NRF_ERROR_INVALID_PARAM If an invalid user id is provided or the user id differs from
+ * the current active user.
+ */
+uint32_t app_uart_close(uint16_t app_uart_id);
+
+
+#endif // APP_UART_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_util.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/app_util.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,308 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_util Utility Functions and Definitions
+ * @{
+ * @ingroup app_common
+ *
+ * @brief Various types and definitions available to all applications.
+ */
+
+#ifndef APP_UTIL_H__
+#define APP_UTIL_H__
+
+#include <stdint.h>
+#include "nordic_global.h"
+#include "compiler_abstraction.h"
+#include "nrf51.h"
+#include "app_error.h"
+
+/**@brief The interrupt priorities available to the application while the softdevice is active. */
+typedef enum
+{
+ APP_IRQ_PRIORITY_HIGH = 1,
+ APP_IRQ_PRIORITY_LOW = 3
+} app_irq_priority_t;
+
+enum
+{
+ UNIT_0_625_MS = 625, /**< Number of microseconds in 0.625 milliseconds. */
+ UNIT_1_25_MS = 1250, /**< Number of microseconds in 1.25 milliseconds. */
+ UNIT_10_MS = 10000 /**< Number of microseconds in 10 milliseconds. */
+};
+
+#define NRF_APP_PRIORITY_THREAD 4 /**< "Interrupt level" when running in Thread Mode. */
+
+/**@cond NO_DOXYGEN */
+#define EXTERNAL_INT_VECTOR_OFFSET 16
+/**@endcond */
+
+#define PACKED(TYPE) __packed TYPE
+
+/**@brief Macro for doing static (i.e. compile time) assertion.
+ *
+ * @note If the assertion fails when compiling using Keil, the compiler will report error message
+ * "error: #94: the size of an array must be greater than zero" (while gcc will list the
+ * symbol static_assert_failed, making the error message more readable).
+ * If the supplied expression can not be evaluated at compile time, Keil will report
+ * "error: #28: expression must have a constant value".
+ *
+ * @note The macro is intentionally implemented not using do while(0), allowing it to be used
+ * outside function blocks (e.g. close to global type- and variable declarations).
+ * If used in a code block, it must be used before any executable code in this block.
+ *
+ * @param[in] EXPR Constant expression to be verified.
+ */
+
+#define STATIC_ASSERT(EXPR) typedef char static_assert_failed[(EXPR) ? 1 : -1]
+
+/**@brief type for holding an encoded (i.e. little endian) 16 bit unsigned integer. */
+typedef uint8_t uint16_le_t[2];
+
+/**@brief type for holding an encoded (i.e. little endian) 32 bit unsigned integer. */
+typedef uint8_t uint32_le_t[4];
+
+/**@brief Byte array type. */
+typedef struct
+{
+ uint16_t size; /**< Number of array entries. */
+ uint8_t * p_data; /**< Pointer to array entries. */
+} uint8_array_t;
+
+/**@brief Macro for entering a critical region.
+ *
+ * @note Due to implementation details, there must exist one and only one call to
+ * CRITICAL_REGION_EXIT() for each call to CRITICAL_REGION_ENTER(), and they must be located
+ * in the same scope.
+ */
+#define CRITICAL_REGION_ENTER() \
+ { \
+ uint8_t IS_NESTED_CRITICAL_REGION = 0; \
+ uint32_t CURRENT_INT_PRI = current_int_priority_get(); \
+ if (CURRENT_INT_PRI != APP_IRQ_PRIORITY_HIGH) \
+ { \
+ uint32_t ERR_CODE = sd_nvic_critical_region_enter(&IS_NESTED_CRITICAL_REGION); \
+ if (ERR_CODE == NRF_ERROR_SOFTDEVICE_NOT_ENABLED) \
+ { \
+ __disable_irq(); \
+ } \
+ else \
+ { \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } \
+ }
+
+/**@brief Macro for leaving a critical region.
+ *
+ * @note Due to implementation details, there must exist one and only one call to
+ * CRITICAL_REGION_EXIT() for each call to CRITICAL_REGION_ENTER(), and they must be located
+ * in the same scope.
+ */
+#define CRITICAL_REGION_EXIT() \
+ if (CURRENT_INT_PRI != APP_IRQ_PRIORITY_HIGH) \
+ { \
+ uint32_t ERR_CODE; \
+ __enable_irq(); \
+ ERR_CODE = sd_nvic_critical_region_exit(IS_NESTED_CRITICAL_REGION); \
+ if (ERR_CODE != NRF_ERROR_SOFTDEVICE_NOT_ENABLED) \
+ { \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } \
+ } \
+ }
+
+/**@brief Perform rounded integer division (as opposed to truncating the result).
+ *
+ * @param[in] A Numerator.
+ * @param[in] B Denominator.
+ *
+ * @return Rounded (integer) result of dividing A by B.
+ */
+#define ROUNDED_DIV(A, B) (((A) + ((B) / 2)) / (B))
+
+/**@brief Check if the integer provided is a power of two.
+ *
+ * @param[in] A Number to be tested.
+ *
+ * @return true if value is power of two.
+ * @return false if value not power of two.
+ */
+#define IS_POWER_OF_TWO(A) ( ((A) != 0) && ((((A) - 1) & (A)) == 0) )
+
+/**@brief To convert ticks to millisecond
+ * @param[in] time Number of millseconds that needs to be converted.
+ * @param[in] resolution Units to be converted.
+ */
+#define MSEC_TO_UNITS(TIME, RESOLUTION) (((TIME) * 1000) / (RESOLUTION))
+
+
+/**@brief Perform integer division, making sure the result is rounded up.
+ *
+ * @details One typical use for this is to compute the number of objects with size B is needed to
+ * hold A number of bytes.
+ *
+ * @param[in] A Numerator.
+ * @param[in] B Denominator.
+ *
+ * @return Integer result of dividing A by B, rounded up.
+ */
+#define CEIL_DIV(A, B) \
+ /*lint -save -e573 */ \
+ ((((A) - 1) / (B)) + 1) \
+ /*lint -restore */
+
+/**@brief Function for encoding a uint16 value.
+ *
+ * @param[in] value Value to be encoded.
+ * @param[out] p_encoded_data Buffer where the encoded data is to be written.
+ *
+ * @return Number of bytes written.
+ */
+static __INLINE uint8_t uint16_encode(uint16_t value, uint8_t * p_encoded_data)
+{
+ p_encoded_data[0] = (uint8_t) ((value & 0x00FF) >> 0);
+ p_encoded_data[1] = (uint8_t) ((value & 0xFF00) >> 8);
+ return sizeof(uint16_t);
+}
+
+/**@brief Function for encoding a uint32 value.
+ *
+ * @param[in] value Value to be encoded.
+ * @param[out] p_encoded_data Buffer where the encoded data is to be written.
+ *
+ * @return Number of bytes written.
+ */
+static __INLINE uint8_t uint32_encode(uint32_t value, uint8_t * p_encoded_data)
+{
+ p_encoded_data[0] = (uint8_t) ((value & 0x000000FF) >> 0);
+ p_encoded_data[1] = (uint8_t) ((value & 0x0000FF00) >> 8);
+ p_encoded_data[2] = (uint8_t) ((value & 0x00FF0000) >> 16);
+ p_encoded_data[3] = (uint8_t) ((value & 0xFF000000) >> 24);
+ return sizeof(uint32_t);
+}
+
+/**@brief Function for decoding a uint16 value.
+ *
+ * @param[in] p_encoded_data Buffer where the encoded data is stored.
+ *
+ * @return Decoded value.
+ */
+static __INLINE uint16_t uint16_decode(const uint8_t * p_encoded_data)
+{
+ return ( (((uint16_t)((uint8_t *)p_encoded_data)[0])) |
+ (((uint16_t)((uint8_t *)p_encoded_data)[1]) << 8 ));
+}
+
+/**@brief Function for decoding a uint32 value.
+ *
+ * @param[in] p_encoded_data Buffer where the encoded data is stored.
+ *
+ * @return Decoded value.
+ */
+static __INLINE uint32_t uint32_decode(const uint8_t * p_encoded_data)
+{
+ return ( (((uint32_t)((uint8_t *)p_encoded_data)[0]) << 0) |
+ (((uint32_t)((uint8_t *)p_encoded_data)[1]) << 8) |
+ (((uint32_t)((uint8_t *)p_encoded_data)[2]) << 16) |
+ (((uint32_t)((uint8_t *)p_encoded_data)[3]) << 24 ));
+}
+
+
+/**@brief Function for finding the current interrupt level.
+ *
+ * @return Current interrupt level.
+ * @retval APP_IRQ_PRIORITY_HIGH We are running in Application High interrupt level.
+ * @retval APP_IRQ_PRIORITY_LOW We are running in Application Low interrupt level.
+ * @retval APP_IRQ_PRIORITY_THREAD We are running in Thread Mode.
+ */
+static __INLINE uint8_t current_int_priority_get(void)
+{
+ uint32_t isr_vector_num = (SCB->ICSR & SCB_ICSR_VECTACTIVE_Msk);
+ if (isr_vector_num > 0)
+ {
+ int32_t irq_type = ((int32_t)isr_vector_num - EXTERNAL_INT_VECTOR_OFFSET);
+ return (NVIC_GetPriority((IRQn_Type)irq_type) & 0xFF);
+ }
+ else
+ {
+ return NRF_APP_PRIORITY_THREAD;
+ }
+}
+
+/** @brief Function for converting the input voltage (in milli volts) into percentage of 3.0 Volts.
+ *
+ * @details The calculation is based on a linearized version of the battery's discharge
+ * curve. 3.0V returns 100% battery level. The limit for power failure is 2.1V and
+ * is considered to be the lower boundary.
+ *
+ * The discharge curve for CR2032 is non-linear. In this model it is split into
+ * 4 linear sections:
+ * - Section 1: 3.0V - 2.9V = 100% - 42% (58% drop on 100 mV)
+ * - Section 2: 2.9V - 2.74V = 42% - 18% (24% drop on 160 mV)
+ * - Section 3: 2.74V - 2.44V = 18% - 6% (12% drop on 300 mV)
+ * - Section 4: 2.44V - 2.1V = 6% - 0% (6% drop on 340 mV)
+ *
+ * These numbers are by no means accurate. Temperature and
+ * load in the actual application is not accounted for!
+ *
+ * @param[in] mvolts The voltage in mV
+ *
+ * @return Battery level in percent.
+*/
+static __INLINE uint8_t battery_level_in_percent(const uint16_t mvolts)
+{
+ uint8_t battery_level;
+
+ if (mvolts >= 3000)
+ {
+ battery_level = 100;
+ }
+ else if (mvolts > 2900)
+ {
+ battery_level = 100 - ((3000 - mvolts) * 58) / 100;
+ }
+ else if (mvolts > 2740)
+ {
+ battery_level = 42 - ((2900 - mvolts) * 24) / 160;
+ }
+ else if (mvolts > 2440)
+ {
+ battery_level = 18 - ((2740 - mvolts) * 12) / 300;
+ }
+ else if (mvolts > 2100)
+ {
+ battery_level = 6 - ((2440 - mvolts) * 6) / 340;
+ }
+ else
+ {
+ battery_level = 0;
+ }
+
+ return battery_level;
+}
+
+/**@brief Function for checking if a pointer value is aligned to a 4 byte boundary.
+ *
+ * @param[in] p Pointer value to be checked.
+ *
+ * @return TRUE if pointer is aligned to a 4 byte boundary, FALSE otherwise.
+ */
+static __INLINE bool is_word_aligned(void * p)
+{
+ return (((uint32_t)p & 0x00000003) == 0);
+}
+
+#endif // APP_UTIL_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/crc16.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/crc16.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,44 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup crc_compute CRC compute
+ * @{
+ * @ingroup hci_transport
+ *
+ * @brief This module implements the CRC-16 calculation in the blocks.
+ */
+
+#ifndef CRC16_H__
+#define CRC16_H__
+
+#include <stdint.h>
+#include "nordic_global.h"
+
+/**@brief Function for calculating CRC-16 in blocks.
+ *
+ * Feed each consecutive data block into this function, along with the current value of p_crc as
+ * returned by the previous call of this function. The first call of this function should pass NULL
+ * as the initial value of the crc in p_crc.
+ *
+ * @param[in] p_data The input data block for computation.
+ * @param[in] size The size of the input data block in bytes.
+ * @param[in] p_crc The previous calculated CRC-16 value or NULL if first call.
+ *
+ * @return The updated CRC-16 value, based on the input supplied.
+ */
+uint16_t crc16_compute(const uint8_t * p_data, uint32_t size, const uint16_t * p_crc);
+
+#endif // CRC16_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/hci_mem_pool.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/hci_mem_pool.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,133 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup memory_pool Memory pool
+ * @{
+ * @ingroup app_common
+ *
+ * @brief Memory pool implementation
+ *
+ * Memory pool implementation, based on circular buffer data structure, which supports asynchronous
+ * processing of RX data. The current default implementation supports 1 TX buffer and 4 RX buffers.
+ * The memory managed by the pool is allocated from static storage instead of heap. The internal
+ * design of the circular buffer implementing the RX memory layout is illustrated in the picture
+ * below.
+ *
+ * @image html memory_pool.png "Circular buffer design"
+ *
+ * The expected call order for the RX APIs is as follows:
+ * - hci_mem_pool_rx_produce
+ * - hci_mem_pool_rx_data_size_set
+ * - hci_mem_pool_rx_extract
+ * - hci_mem_pool_rx_consume
+ *
+ * @warning If the above mentioned expected call order is violated the end result can be undefined.
+ *
+ * \par Component specific configuration options
+ *
+ * The following compile time configuration options are available to suit various implementations:
+ * - TX_BUF_SIZE TX buffer size in bytes.
+ * - RX_BUF_SIZE RX buffer size in bytes.
+ * - RX_BUF_QUEUE_SIZE RX buffer element size.
+ */
+
+#ifndef HCI_MEM_POOL_H__
+#define HCI_MEM_POOL_H__
+
+#include <stdint.h>
+#include "nordic_global.h"
+#include "nrf_error.h"
+
+/**@brief Function for opening the module.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ */
+uint32_t hci_mem_pool_open(void);
+
+/**@brief Function for closing the module.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ */
+uint32_t hci_mem_pool_close(void);
+
+/**@brief Function for allocating requested amount of TX memory.
+ *
+ * @param[out] pp_buffer Pointer to the allocated memory.
+ *
+ * @retval NRF_SUCCESS Operation success. Memory was allocated.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No memory available for allocation.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_mem_pool_tx_alloc(void ** pp_buffer);
+
+/**@brief Function for freeing previously allocated TX memory.
+ *
+ * @note Memory management follows the FIFO principle meaning that free() order must match the
+ * alloc(...) order, which is the reason for omitting exact memory block identifier as an
+ * input parameter.
+ *
+ * @retval NRF_SUCCESS Operation success. Memory was freed.
+ */
+uint32_t hci_mem_pool_tx_free(void);
+
+/**@brief Function for producing a free RX memory block for usage.
+ *
+ * @note Upon produce request amount being 0, NRF_SUCCESS is returned.
+ *
+ * @param[in] length Amount, in bytes, of free memory to be produced.
+ * @param[out] pp_buffer Pointer to the allocated memory.
+ *
+ * @retval NRF_SUCCESS Operation success. Free RX memory block produced.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No suitable memory available for allocation.
+ * @retval NRF_ERROR_DATA_SIZE Operation failure. Request size exceeds limit.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_mem_pool_rx_produce(uint32_t length, void ** pp_buffer);
+
+/**@brief Function for setting the length of the last produced RX memory block.
+ *
+ * @warning If call to this API is omitted the end result is that the following call to
+ * mem_pool_rx_extract will return incorrect data in the p_length output parameter.
+ *
+ * @param[in] length Amount, in bytes, of actual memory used.
+ *
+ * @retval NRF_SUCCESS Operation success. Length was set.
+ */
+uint32_t hci_mem_pool_rx_data_size_set(uint32_t length);
+
+/**@brief Function for extracting a packet, which has been filled with read data, for further
+ * processing.
+ *
+ * @param[out] pp_buffer Pointer to the packet data.
+ * @param[out] p_length Length of packet data in bytes.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No packet available to extract.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_mem_pool_rx_extract(uint8_t ** pp_buffer, uint32_t * p_length);
+
+/**@brief Function for freeing previously extracted packet, which has been filled with read data.
+ *
+ * @param[in] p_buffer Pointer to consumed buffer.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No packet available to free.
+ * @retval NRF_ERROR_INVALID_ADDR Operation failure. Not a valid pointer.
+ */
+uint32_t hci_mem_pool_rx_consume(uint8_t * p_buffer);
+
+#endif // HCI_MEM_POOL_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/hci_mem_pool_internal.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/hci_mem_pool_internal.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,32 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup memory_pool_internal Memory Pool Internal
+ * @{
+ * @ingroup memory_pool
+ *
+ * @brief Memory pool internal definitions
+ */
+
+#ifndef MEM_POOL_INTERNAL_H__
+#define MEM_POOL_INTERNAL_H__
+
+#define TX_BUF_SIZE 600u /**< TX buffer size in bytes. */
+#define RX_BUF_SIZE TX_BUF_SIZE /**< RX buffer size in bytes. */
+
+#define RX_BUF_QUEUE_SIZE 4u /**< RX buffer element size. */
+
+#endif // MEM_POOL_INTERNAL_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/hci_slip.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/hci_slip.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,130 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup hci_slip SLIP module
+ * @{
+ * @ingroup app_common
+ *
+ * @brief SLIP layer for supporting packet framing in HCI transport.
+ *
+ * @details This module implements SLIP packet framing as described in the Bluetooth Core
+ * Specification 4.0, Volume 4, Part D, Chapter 3 SLIP Layer.
+ *
+ * SLIP framing ensures that all packets sent on the UART are framed as:
+ * <0xC0> SLIP packet 1 <0xC0> <0xC0> SLIP packet 2 <0xC0>.
+ *
+ * The SLIP layer uses events to notify the upper layer when data transmission is complete
+ * and when a SLIP packet is received.
+ */
+
+#ifndef HCI_SLIP_H__
+#define HCI_SLIP_H__
+
+#include <stdint.h>
+#include "nordic_global.h"
+
+/**@brief Event types from the SLIP Layer. */
+typedef enum
+{
+ HCI_SLIP_RX_RDY, /**< An event indicating that an RX packet is ready to be read. */
+ HCI_SLIP_TX_DONE, /**< An event indicating write completion of the TX packet provided in the function call \ref hci_slip_write . */
+ HCI_SLIP_RX_OVERFLOW, /**< An event indicating that RX data has been discarded due to lack of free RX memory. */
+ HCI_SLIP_ERROR, /**< An event indicating that an unrecoverable error has occurred. */
+ HCI_SLIP_EVT_TYPE_MAX /**< Enumeration upper bound. */
+} hci_slip_evt_type_t;
+
+/**@brief Structure containing an event from the SLIP layer.
+ */
+typedef struct
+{
+ hci_slip_evt_type_t evt_type; /**< Type of event. */
+ const uint8_t * packet; /**< This field contains a pointer to the packet for which the event relates, i.e. SLIP_TX_DONE: the packet transmitted, SLIP_RX_RDY: the packet received, SLIP_RX_OVERFLOW: The packet which overflow/or NULL if no receive buffer is available. */
+ uint32_t packet_length; /**< Packet length, i.e. SLIP_TX_DONE: Bytes transmitted, SLIP_RX_RDY: Bytes received, SLIP_RX_OVERFLOW: index at which the packet overflowed. */
+} hci_slip_evt_t;
+
+/**@brief Function for the SLIP layer event callback.
+ */
+typedef void (*hci_slip_event_handler_t)(hci_slip_evt_t event);
+
+/**@brief Function for registering the event handler provided as parameter and this event handler
+ * will be used by SLIP layer to send events described in \ref hci_slip_evt_type_t.
+ *
+ * @note Multiple registration requests will overwrite any existing registration.
+ *
+ * @param[in] event_handler This function is called by the SLIP layer upon an event.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ */
+uint32_t hci_slip_evt_handler_register(hci_slip_event_handler_t event_handler);
+
+/**@brief Function for opening the SLIP layer. This function must be called before
+ * \ref hci_slip_write and before any data can be received.
+ *
+ * @note Can be called multiple times.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ *
+ * The SLIP layer module will propagate errors from underlying sub-modules.
+ * This implementation is using UART module as a physical transmission layer, and hci_slip_open
+ * executes \ref app_uart_init . For an extended error list, please refer to \ref app_uart_init .
+ */
+uint32_t hci_slip_open(void);
+
+/**@brief Function for closing the SLIP layer. After this function is called no data can be
+ * transmitted or received in this layer.
+ *
+ * @note This function can be called multiple times and also for an unopened channel.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ */
+uint32_t hci_slip_close(void);
+
+/**@brief Function for writing a packet with SLIP encoding. Packet transmission is confirmed when
+ * the HCI_SLIP_TX_DONE event is received by the function caller.
+ *
+ * @param[in] p_buffer Pointer to the packet to transmit.
+ * @param[in] length Packet length, in bytes.
+ *
+ * @retval NRF_SUCCESS Operation success. Packet was encoded and added to the
+ * transmission queue and an event will be sent upon transmission
+ * completion.
+ * @retval NRF_ERROR_NO_MEM Operation failure. Transmission queue is full and packet was not
+ * added to the transmission queue. Application shall wait for
+ * the \ref HCI_SLIP_TX_DONE event. After HCI_SLIP_TX_DONE this
+ * function can be executed for transmission of next packet.
+ * @retval NRF_ERROR_INVALID_ADDR If a NULL pointer is provided.
+ * @retval NRF_ERROR_INVALID_STATE Operation failure. Module is not open.
+ */
+uint32_t hci_slip_write(const uint8_t * p_buffer, uint32_t length);
+
+/**@brief Function for registering a receive buffer. The receive buffer will be used for storage of
+ * received and SLIP decoded data.
+ * No data can be received by the SLIP layer until a receive buffer has been registered.
+ *
+ * @note The lifetime of the buffer must be valid during complete reception of data. A static
+ * buffer is recommended.
+ *
+ * @warning Multiple registration requests will overwrite any existing registration.
+ *
+ * @param[in] p_buffer Pointer to receive buffer. The received and SLIP decoded packet
+ * will be placed in this buffer.
+ * @param[in] length Buffer length, in bytes.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ */
+uint32_t hci_slip_rx_buffer_register(uint8_t * p_buffer, uint32_t length);
+
+#endif // HCI_SLIP_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/hci_transport.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/hci_transport.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,221 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/**@file
+ *
+ * @defgroup hci_transport HCI Transport
+ * @{
+ * @ingroup app_common
+ *
+ * @brief HCI transport module implementation.
+ *
+ * This module implements certain specific features from the three-wire UART transport layer,
+ * defined by the Bluetooth specification version 4.0 [Vol 4] part D.
+ *
+ * \par Features supported
+ * - Transmission and reception of Vendor Specific HCI packet type application packets.
+ * - Transmission and reception of reliable packets: defined by chapter 6 of the specification.
+ *
+ * \par Features not supported
+ * - Link establishment procedure: defined by chapter 8 of the specification.
+ * - Low power: defined by chapter 9 of the specification.
+ *
+ * \par Implementation specific behaviour
+ * - As Link establishment procedure is not supported following static link configuration parameters
+ * are used:
+ * + TX window size is 1.
+ * + 16 bit CCITT-CRC must be used.
+ * + Out of frame software flow control not supported.
+ * + Parameters specific for resending reliable packets are compile time configurable (clarifed
+ * later in this document).
+ * + Acknowledgement packet transmissions are not timeout driven , meaning they are delivered for
+ * transmission within same context which the corresponding application packet was received.
+ *
+ * \par Implementation specific limitations
+ * Current implementation has the following limitations which will have impact to system wide
+ * behaviour:
+ * - Delayed acknowledgement scheduling not implemented:
+ * There exists a possibility that acknowledgement TX packet and application TX packet will collide
+ * in the TX pipeline having the end result that acknowledgement packet will be excluded from the TX
+ * pipeline which will trigger the retransmission algorithm within the peer protocol entity.
+ * - Delayed retransmission scheduling not implemented:
+ * There exists a possibility that retransmitted application TX packet and acknowledgement TX packet
+ * will collide in the TX pipeline having the end result that retransmitted application TX packet
+ * will be excluded from the TX pipeline.
+ * - Processing of the acknowledgement number from RX application packets:
+ * Acknowledgement number is not processed from the RX application packets having the end result
+ * that unnecessary application packet retransmissions can occur.
+ *
+ * The application TX packet processing flow is illustrated by the statemachine below.
+ *
+ * @image html hci_transport_tx_sm.png "TX - application packet statemachine"
+ *
+ * \par Component specific configuration options
+ *
+ * The following compile time configuration options are available, and used to configure the
+ * application TX packet retransmission interval, in order to suite various application specific
+ * implementations:
+ * - MAC_PACKET_SIZE_IN_BITS Maximum size of a single application packet in bits.
+ * - USED_BAUD_RATE Used uart baudrate.
+ *
+ * The following compile time configuration option is available to configure module specific
+ * behaviour:
+ * - MAX_RETRY_COUNT Max retransmission retry count for applicaton packets.
+ */
+
+#ifndef HCI_TRANSPORT_H__
+#define HCI_TRANSPORT_H__
+
+#include <stdint.h>
+#include "nordic_global.h"
+#include "nrf_error.h"
+
+/**@brief Generic event callback function events. */
+typedef enum
+{
+ HCI_TRANSPORT_RX_RDY, /**< An event indicating that RX packet is ready for read. */
+ HCI_TRANSPORT_EVT_TYPE_MAX /**< Enumeration upper bound. */
+} hci_transport_evt_type_t;
+
+/**@brief Struct containing events from the Transport layer.
+ */
+typedef struct
+{
+ hci_transport_evt_type_t evt_type; /**< Type of event. */
+} hci_transport_evt_t;
+
+/**@brief Transport layer generic event callback function type.
+ *
+ * @param[in] event Transport layer event.
+ */
+typedef void (*hci_transport_event_handler_t)(hci_transport_evt_t event);
+
+/**@brief TX done event callback function result codes. */
+typedef enum
+{
+ HCI_TRANSPORT_TX_DONE_SUCCESS, /**< Transmission success, peer transport entity has acknowledged the transmission. */
+ HCI_TRANSPORT_TX_DONE_FAILURE /**< Transmission failure. */
+} hci_transport_tx_done_result_t;
+
+/**@brief Transport layer TX done event callback function type.
+ *
+ * @param[in] result TX done event result code.
+ */
+typedef void (*hci_transport_tx_done_handler_t)(hci_transport_tx_done_result_t result);
+
+/**@brief Function for registering a generic event handler.
+ *
+ * @note Multiple registration requests will overwrite any possible existing registration.
+ *
+ * @param[in] event_handler The function to be called by the transport layer upon an event.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_transport_evt_handler_reg(hci_transport_event_handler_t event_handler);
+
+/**@brief Function for registering a handler for TX done event.
+ *
+ * @note Multiple registration requests will overwrite any possible existing registration.
+ *
+ * @param[in] event_handler The function to be called by the transport layer upon TX done
+ * event.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_transport_tx_done_register(hci_transport_tx_done_handler_t event_handler);
+
+/**@brief Function for opening the transport channel and initializing the transport layer.
+ *
+ * @warning Must not be called for a channel which has been allready opened.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_INTERNAL Operation failure. Internal error ocurred.
+ */
+uint32_t hci_transport_open(void);
+
+/**@brief Function for closing the transport channel.
+ *
+ * @note Can be called multiple times and also for not opened channel.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ */
+uint32_t hci_transport_close(void);
+
+/**@brief Function for allocating tx packet memory.
+ *
+ * @param[out] pp_memory Pointer to the packet data.
+ *
+ * @retval NRF_SUCCESS Operation success. Memory was allocated.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No memory available.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_transport_tx_alloc(uint8_t ** pp_memory);
+
+/**@brief Function for freeing tx packet memory.
+ *
+ * @note Memory management works in FIFO principle meaning that free order must match the alloc
+ * order.
+ *
+ * @retval NRF_SUCCESS Operation success. Memory was freed.
+ */
+uint32_t hci_transport_tx_free(void);
+
+/**@brief Function for writing a packet.
+ *
+ * @note Completion of this method does not guarantee that actual peripheral transmission would
+ * have completed.
+ *
+ * @note In case of 0 byte packet length write request, message will consist of only transport
+ * module specific headers.
+ *
+ * @retval NRF_SUCCESS Operation success. Packet was added to the transmission queue
+ * and an event will be send upon transmission completion.
+ * @retval NRF_ERROR_NO_MEM Operation failure. Transmission queue is full and packet was not
+ * added to the transmission queue. User should wait for
+ * a appropriate event prior issuing this operation again.
+ * @retval NRF_ERROR_DATA_SIZE Operation failure. Packet size exceeds limit.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ * @retval NRF_ERROR_INVALID_STATE Operation failure. Channel is not open.
+ */
+uint32_t hci_transport_pkt_write(const uint8_t * p_buffer, uint32_t length);
+
+/**@brief Function for extracting received packet.
+ *
+ * @note Extracted memory can't be reused by the underlying transport layer untill freed by call to
+ * hci_transport_rx_pkt_consume().
+ *
+ * @param[out] pp_buffer Pointer to the packet data.
+ * @param[out] p_length Length of packet data in bytes.
+ *
+ * @retval NRF_SUCCESS Operation success. Packet was extracted.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No packet available to extract.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_transport_rx_pkt_extract(uint8_t ** pp_buffer, uint32_t * p_length);
+
+/**@brief Function for consuming extracted packet described by p_buffer.
+ *
+ * RX memory pointed to by p_buffer is freed and can be reused by the underlying transport layer.
+ *
+ * @param[in] p_buffer Pointer to the buffer that has been consumed.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No packet available to consume.
+ * @retval NRF_ERROR_INVALID_ADDR Operation failure. Not a valid pointer.
+ */
+uint32_t hci_transport_rx_pkt_consume(uint8_t * p_buffer);
+
+#endif // HCI_TRANSPORT_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/pstorage.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/app_common/pstorage.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,334 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/**@file
+ *
+ * @defgroup persistent_storage Persistent Storage Interface
+ * @{
+ * @ingroup app_common
+ * @brief Abstracted flash interface.
+ *
+ * @details In order to ensure that the SDK and application be moved to alternate persistent storage
+ * options other than the default provided with NRF solution, an abstracted interface is provided
+ * by the module to ensure SDK modules and application can be ported to alternate option with ease.
+ */
+
+#ifndef PSTORAGE_H__
+#define PSTORAGE_H__
+
+#include "nordic_global.h"
+#include "pstorage_platform.h"
+
+
+/**@defgroup ps_opcode Persistent Storage Access Operation Codes
+ * @{
+ * @brief Persistent Storage Access Operation Codes. These are used to report any error during
+ * a persistent storage access operation or any general error that may occur in the
+ * interface.
+ *
+ * @details Persistent Storage Access Operation Codes used in error notification callback
+ * registered with the interface to report any error during an persistent storage access
+ * operation or any general error that may occur in the interface.
+ */
+ #define PSTORAGE_ERROR_OP_CODE 0x01 /**< General Error Code */
+ #define PSTORAGE_STORE_OP_CODE 0x02 /**< Error when Store Operation was requested */
+ #define PSTORAGE_LOAD_OP_CODE 0x03 /**< Error when Load Operation was requested */
+ #define PSTORAGE_CLEAR_OP_CODE 0x04 /**< Error when Clear Operation was requested */
+
+/**@} */
+
+/**@defgroup pstorage_data_types Persistent Memory Interface Data Types
+ * @{
+ * @brief Data Types needed for interfacing with persistent memory.
+ *
+ * @details Data Types needed for interfacing with persistent memory.
+ */
+
+/**@brief Persistent Storage Error Reporting Callback
+ *
+ * @details Persistent Storage Error Reporting Callback that is used by the interface to report
+ * success or failure of a flash operation. Therefore, for store operation or clear
+ * operations, that take time, application can know when the procedure was complete.
+ * For store operation, since no data copy is made, receiving a success or failure
+ * notification, indicated by the reason parameter of callback is an indication that
+ * the resident memory could now be reused or freed, as the case may be.
+ * This callback is not received for load operation.
+ *
+ * @param handle Identifies module and block for which callback is received.
+ * @param op_code Identifies the operation for which the event is notified.
+ * @param result Identifies the result of flash access operation.
+ * NRF_SUCCESS implies, operation succeeded.
+ * @param p_data Identifies the application data pointer. In case of store operation, this points
+ * to the resident source of application memory that application can now free or
+ * reuse. In case of clear, this is NULL as no application pointer is needed for
+ * this operation.
+ * @param data_len Length data application had provided for the operation.
+ *
+ */
+typedef void (*pstorage_ntf_cb_t)(pstorage_handle_t * p_handle,
+ uint8_t op_code,
+ uint32_t result,
+ uint8_t * p_data,
+ uint32_t data_len);
+
+
+typedef struct ps_module_param
+{
+
+ pstorage_ntf_cb_t cb; /**< Callback registered with the module to be notified of any error occurring in persistent memory management */
+ pstorage_size_t block_size; /**< Desired block size for persistent memory storage, for example, if a module has a table with 10 entries, each entry is size 64 bytes,
+ * it can request 10 blocks with block size 64 bytes. On the other hand, the module can also request one block of size 640 based on
+ * how it would like to access or alter memory in persistent memory.
+ * First option is preferred when single entries that need to be updated often when having no impact on the other entries.
+ * While second option is preferred when entries of table are not changed on individually but have common point of loading and storing
+ * data.
+ */
+ pstorage_size_t block_count; /** Number of blocks requested by the module, minimum values is 1. */
+
+} pstorage_module_param_t;
+
+/**@} */
+
+/**@defgroup pstorage_routines Persistent Storage Access Routines
+ * @{
+ * @brief Functions/Interface SDK modules use to persistently store data.
+ *
+ * @details Interface for Application & SDK module to load/store information persistently.
+ * Note: that while implementation of each of the persistent storage access function
+ * depends on the system and can specific to system/solution, the signature of the
+ * interface routines should not be altered.
+ */
+
+/**@brief Module Initialization Routine.
+ *
+ * @details Initializes module. To be called once before any other APIs of the module are used.
+ *
+ * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ */
+uint32_t pstorage_init(void);
+
+
+/**@brief Register with persistent storage interface.
+ *
+ * @param[in] p_module_param Module registration param.
+ * @param[out] p_block_id Block identifier to identify persistent memory blocks in case registration
+ * succeeds. Application is expected to use the block ids for subsequent operations on
+ * requested persistent memory. Maximum registrations permitted is determined by
+ * configuration parameter PSTORAGE_MAX_APPLICATIONS.
+ * In case more than one memory blocks are requested, the identifier provided here is
+ * the base identifier for the first block and to identify subsequent block,
+ * application shall use \@ref pstorage_block_identifier_get with this base identifier
+ * and block number. Therefore if 10 blocks of size 64 are requested and application
+ * wishes to store memory in 6th block, it shall use
+ * \@ref pstorage_block_identifier_get with based id and provide a block number of 5.
+ * This way application is only expected to remember the base block identifier.
+ *
+ * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_NO_MEM in case no more registrations can be supported.
+ */
+uint32_t pstorage_register(pstorage_module_param_t * p_module_param,
+ pstorage_handle_t* p_block_id);
+
+
+/**
+ * @brief Function to get block id with reference to base block identifier provided at time of
+ * registration.
+ *
+ * @details Function to get block id with reference to base block identifier provided at time of
+ * registration.
+ * In case more than one memory blocks were requested when registering, the identifier
+ * provided here is the base identifier for the first block and to identify subsequent
+ * block, application shall use this routine to get block identifier providing input as
+ * base identifier and block number. Therefore if 10 blocks of size 64 are requested and
+ * application wishes to store memory in 6th block, it shall use
+ * \@ref pstorage_block_identifier_get with based id and provide a block number of 5.
+ * This way application is only expected to remember the base block identifier.
+ *
+ * @param[in] p_base_id Base block id received at the time of registration.
+ * @param[in] block_num Block Number, with first block numbered zero.
+ * @param[out] p_block_id Block identifier for the block number requested in case the API succeeds.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ */
+uint32_t pstorage_block_identifier_get(pstorage_handle_t * p_base_id,
+ pstorage_size_t block_num,
+ pstorage_handle_t * p_block_id);
+
+
+/**@brief Routine to persistently store data of length 'size' contained in 'p_src' address
+ * in storage module at 'p_dest' address; Equivalent to Storage Write.
+ *
+ * @param[in] p_dest Destination address where data is to be stored persistently.
+ * @param[in] p_src Source address containing data to be stored. API assumes this to be resident
+ * memory and no intermediate copy of data is made by the API.
+ * @param[in] size Size of data to be stored expressed in bytes. Should be word aligned.
+ * @param[in] offset Offset in bytes to be applied when writing to the block.
+ * For example, if within a block of 100 bytes, application wishes to
+ * write 20 bytes at offset of 12, then this field should be set to 12.
+ * Should be word aligned.
+ *
+ * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_src' is not aligned.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ *
+ * @warning No copy of the data is made, and hence memory provided for data source to be written
+ * to flash cannot be freed or reused by the application until this procedure
+ * is complete. End of this procedure is notified to the application using the
+ * notification callback registered by the application.
+ */
+uint32_t pstorage_store(pstorage_handle_t * p_dest,
+ uint8_t * p_src,
+ pstorage_size_t size,
+ pstorage_size_t offset);
+
+
+/**@brief Routine to load persistently stored data of length 'size' from 'p_src' address
+ * to 'p_dest' address; Equivalent to Storage Read.
+ *
+ * @param[in] p_dest Destination address where persistently stored data is to be loaded.
+ * @param[in] p_src Source from where data is to be loaded from persistent memory.
+ * @param[in] size Size of data to be loaded from persistent memory expressed in bytes.
+ * Should be word aligned.
+ * @param[in] offset Offset in bytes to be applied when loading from the block.
+ * For example, if within a block of 100 bytes, application wishes to
+ * load 20 bytes from offset of 12, then this field should be set to 12.
+ * Should be word aligned.
+ *
+ *
+ * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_dst' is not aligned.
+ */
+uint32_t pstorage_load(uint8_t * p_dest,
+ pstorage_handle_t * p_src,
+ pstorage_size_t size,
+ pstorage_size_t offset);
+
+
+/**@brief Routine to clear data in persistent memory.
+ *
+ * @param[in] p_base_id Base block identifier in persistent memory that needs to cleared;
+ * Equivalent to an Erase Operation.
+ *
+ * @param[in] size Size of data to be cleared from persistent memory expressed in bytes.
+ * This is currently unused. And a clear would mean clearing all blocks,
+ * however, this parameter is to provision for clearing of certain blocks
+ * of memory only and not all if need be.
+ *
+ * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ *
+ * @note Clear operations may take time. This API however, does not block until the clear
+ * procedure is complete. Application is notified of procedure completion using
+ * notification callback registered by the application. 'result' parameter of the
+ * callback suggests if the procedure was successful or not.
+ */
+uint32_t pstorage_clear(pstorage_handle_t * p_base_id, pstorage_size_t size);
+
+#ifdef PSTORAGE_RAW_MODE_ENABLE
+
+/**@brief Function for registering with persistent storage interface.
+ *
+ * @param[in] p_module_param Module registration param.
+ * @param[out] p_block_id Block identifier to identify persistent memory blocks in case
+ * registration succeeds. Application is expected to use the block ids for subsequent
+ * operations on requested persistent memory.
+ * In case more than one memory blocks are requested, the identifier provided here is
+ * the base identifier for the first block and to identify subsequent block,
+ * application shall use \@ref pstorage_block_identifier_get with this base identifier
+ * and block number. Therefore if 10 blocks of size 64 are requested and application
+ * wishes to store memory in 6th block, it shall use
+ * \@ref pstorage_block_identifier_get with based id and provide a block number of 5.
+ * This way application is only expected to remember the base block identifier.
+ *
+ * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_NO_MEM in case no more registrations can be supported.
+ */
+uint32_t pstorage_raw_register(pstorage_module_param_t * p_module_param,
+ pstorage_handle_t * p_block_id);
+
+/**@brief Raw mode function for persistently storing data of length 'size' contained in 'p_src'
+ * address in storage module at 'p_dest' address; Equivalent to Storage Write.
+ *
+ * @param[in] p_dest Destination address where data is to be stored persistently.
+ * @param[in] p_src Source address containing data to be stored. API assumes this to be resident
+ * memory and no intermediate copy of data is made by the API.
+ * @param[in] size Size of data to be stored expressed in bytes. Should be word aligned.
+ * @param[in] offset Offset in bytes to be applied when writing to the block.
+ * For example, if within a block of 100 bytes, application wishes to
+ * write 20 bytes at offset of 12, then this field should be set to 12.
+ * Should be word aligned.
+ *
+ * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_src' is not aligned.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ *
+ * @warning No copy of the data is made, and hence memory provided for data source to be written
+ * to flash cannot be freed or reused by the application until this procedure
+ * is complete. End of this procedure is notified to the application using the
+ * notification callback registered by the application.
+ */
+uint32_t pstorage_raw_store(pstorage_handle_t * p_dest,
+ uint8_t * p_src,
+ pstorage_size_t size,
+ pstorage_size_t offset);
+
+/**@brief Function for clearing data in persistent memory in raw mode.
+ *
+ * @param[in] p_base_id Base block identifier in persistent memory that needs to cleared;
+ * Equivalent to an Erase Operation.
+ *
+ * @param[in] size Size of data to be cleared from persistent memory expressed in bytes.
+ * This is currently unused. And a clear would mean clearing all blocks,
+ * however, this parameter is to provision for clearing of certain blocks
+ * of memory only and not all if need be.
+ *
+ * @retval NRF_SUCCESS on success, otherwise an appropriate error code.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ *
+ * @note Clear operations may take time. This API however, does not block until the clear
+ * procedure is complete. Application is notified of procedure completion using
+ * notification callback registered by the application. 'result' parameter of the
+ * callback suggests if the procedure was successful or not.
+ */
+uint32_t pstorage_raw_clear(pstorage_handle_t * p_dest, pstorage_size_t size);
+
+#endif // PSTORAGE_RAW_MODE_ENABLE
+
+/**@} */
+/**@} */
+
+#endif // PSTORAGE_H__
+
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_advdata.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_advdata.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,114 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_sdk_lib_advdata Advertising Data Encoder
+ * @{
+ * @ingroup ble_sdk_lib
+ * @brief Function for encoding the advertising data and/or scan response data, and passing them to
+ * the stack.
+ */
+
+#ifndef BLE_ADVDATA_H__
+#define BLE_ADVDATA_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include "nordic_global.h"
+#include "ble.h"
+#include "app_util.h"
+
+/**@brief Advertising data name type. This contains the options available for the device name inside
+ * the advertising data. */
+typedef enum
+{
+ BLE_ADVDATA_NO_NAME, /**< Include no device name in advertising data. */
+ BLE_ADVDATA_SHORT_NAME, /**< Include short device name in advertising data. */
+ BLE_ADVDATA_FULL_NAME /**< Include full device name in advertising data. */
+} ble_advdata_name_type_t;
+
+/**@brief UUID list type. */
+typedef struct
+{
+ uint16_t uuid_cnt; /**< Number of UUID entries. */
+ ble_uuid_t * p_uuids; /**< Pointer to UUID array entries. */
+} ble_advdata_uuid_list_t;
+
+/**@brief Connection interval range structure. */
+typedef struct
+{
+ uint16_t min_conn_interval; /**< Minimum Connection Interval, in units of 1.25ms, range 6 to 3200 (i.e. 7.5ms to 4s). */
+ uint16_t max_conn_interval; /**< Maximum Connection Interval, in units of 1.25ms, range 6 to 3200 (i.e. 7.5ms to 4s). Value of 0xFFFF indicates no specific maximum. */
+} ble_advdata_conn_int_t;
+
+/**@brief Manufacturer specific data structure. */
+typedef struct
+{
+ uint16_t company_identifier; /**< Company Identifier Code. */
+ uint8_array_t data; /**< Additional manufacturer specific data. */
+} ble_advdata_manuf_data_t;
+
+/**@brief Service data structure. */
+typedef struct
+{
+ uint16_t service_uuid; /**< Service UUID. */
+ uint8_array_t data; /**< Additional service data. */
+} ble_advdata_service_data_t;
+
+/**@brief Advertising data structure. This contains all options and data needed for encoding and
+ * setting the advertising data. */
+typedef struct
+{
+ ble_advdata_name_type_t name_type; /**< Type of device name. */
+ uint8_t short_name_len; /**< Length of short device name (if short type is specified). */
+ bool include_appearance; /**< Determines if Appearance shall be included. */
+ uint8_array_t flags; /**< Advertising data Flags field. */
+ int8_t * p_tx_power_level; /**< TX Power Level field. */
+ ble_advdata_uuid_list_t uuids_more_available; /**< List of UUIDs in the 'More Available' list. */
+ ble_advdata_uuid_list_t uuids_complete; /**< List of UUIDs in the 'Complete' list. */
+ ble_advdata_uuid_list_t uuids_solicited; /**< List of solcited UUIDs. */
+ ble_advdata_conn_int_t * p_slave_conn_int; /**< Slave Connection Interval Range. */
+ ble_advdata_manuf_data_t * p_manuf_specific_data; /**< Manufacturer specific data. */
+ ble_advdata_service_data_t * p_service_data_array; /**< Array of Service data structures. */
+ uint8_t service_data_count; /**< Number of Service data structures. */
+} ble_advdata_t;
+
+/**@brief Function for encoding and setting the advertising data and/or scan response data.
+ *
+ * @details This function encodes advertising data and/or scan response data based on the selections
+ * in the supplied structures, and passes the encoded data to the stack.
+ *
+ * @param[in] p_advdata Structure for specifying the content of the advertising data.
+ * Set to NULL if advertising data is not to be set.
+ * @param[in] p_srdata Structure for specifying the content of the scan response data.
+ * Set to NULL if scan response data is not to be set.
+ *
+ * @return NRF_SUCCESS on success, NRF_ERROR_DATA_SIZE if not all the requested data could fit
+ * into the advertising packet. The maximum size of the advertisement packet is @ref
+ * BLE_GAP_ADV_MAX_SIZE.
+ *
+ * @warning This API may override application's request to use the long name and use a short name
+ * instead. This truncation will occur in case the long name does not fit advertisement data size.
+ * Application is permitted to specify a preferred short name length in case truncation is required.
+ * For example, if the complete device name is ABCD_HRMonitor, application can specify short name
+ * length to 8 such that short device name appears as ABCD_HRM instead of ABCD_HRMo or ABCD_HRMoni
+ * etc if available size for short name is 9 or 12 respectively to have more apporpriate short name.
+ * However, it should be noted that this is just a preference that application can specify and
+ * if the preference too large to fit in Advertisement Data, this can be further truncated.
+ */
+uint32_t ble_advdata_set(const ble_advdata_t * p_advdata, const ble_advdata_t * p_srdata);
+
+#endif // BLE_ADVDATA_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_advdata_parser.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_advdata_parser.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,10 @@ +#ifndef BLE_ADVDATA_PARSER_H_ +#define BLE_ADVDATA_PARSER_H_ + +#include "nordic_global.h" +#include "ble_advdata.h" + +uint32_t ble_advdata_parse(uint8_t * p_data, uint8_t len, ble_advdata_t * advdata); +uint32_t ble_advdata_parser_field_find(uint8_t type, uint8_t * p_advdata, uint8_t * len, uint8_t ** pp_field_data); + +#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_bondmngr.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_bondmngr.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,339 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_sdk_lib_bond_manager Bonds and Persistent Data Manager
+ * @{
+ * @ingroup ble_sdk_lib
+ * @brief This module handles multiple bonds and persistent attributes.
+ *
+ * @details When using <i>Bluetooth</i> low energy, a central device and a peripheral device can
+ * exchange identification information which they are capable of storing in memory (for
+ * example, in non-volatile memory). This information can be used for identity verification
+ * between the devices when they reconnect in the future. This relationship is known as a
+ * 'bond'.
+ *
+ * <b>Bonding Information:</b>
+ *
+ * The S110 SoftDevice handles the BLE on-air transactions necessary to establish a new
+ * bond or to use a previous bond when it reconnects to a bonded central. It is however up
+ * to the application layer to memorize the <i>identification information</i> between
+ * connections and to provide them back to the S110 stack when it detects a re-connection
+ * from a previously bonded central. This identification information is referred to as
+ * Bonding Information in code and the SDK.
+ *
+ * <b>System Attributes:</b>
+ *
+ * If the application is a GATT server, it stores a set of persistent attributes related
+ * to a connection when bonding with a central. On reconnection with the known bonded
+ * central, the application restores the related persistent attributes in the last known
+ * state back to the S110 SoftDevice. These persistent attributes mainly include the Client
+ * Characteristic Configuration Descriptor (or CCCD, see the <i><b>Bluetooth</b>
+ * Core Specification</i> for more information) states and could include other attributes
+ * in the future. Persistent attributes are referred to as System Attributes in code and
+ * in the SDK documentation.
+ *
+ * An application can use the Bonds and Persistent Data Manager module (referred to as the
+ * bond manager) included in the nRF51 SDK to handle most of the operations related to
+ * the Bonding Information and System Attributes. The bond manager notifies the
+ * application when it's connected to a new bonded central or to a previously bonded central.
+ * The application can use the Bond Manager API to store or load (or restore) the
+ * Bonding Information and System Attributes. The bond manager identifies all the centrals
+ * the application is bonded to and restores their respective Bonding Information and
+ * System Attributes to the S110 stack.
+ *
+ * In addition, you can use the bond manager to set up your application to advertise:
+ *
+ * - To a given bonded central using directed advertisement.
+ * - To a list of bonded centrals - i.e. using whitelist.
+ *
+ * The bond manager automatically writes the Bonding Information to the flash memory when
+ * the bonding procedure to a new central is finished. Upon disconnection, the application
+ * should use the Bond Manager API @ref ble_bondmngr_bonded_centrals_store to write the
+ * latest Bonding Information and System Attributes to flash.
+ *
+ * The bond manager provides the API @ref ble_bondmngr_sys_attr_store to allow the
+ * application to write the System Attributes to flash while in a connection. Your
+ * application should call this API when it considers that all CCCDs and other persistent
+ * attributes are in a stable state. This API call will safely fail if System Attributes
+ * data for the current connected central is already present in the flash. The API does so
+ * because a flash write in such a situation would require an erase of flash, which takes a
+ * long time (21 milliseconds) to complete. This may disrupt the radio.
+ *
+ * Applications using the Bond Manager must have a configuration file named
+ * ble_bondmngr_cfg.h (see below for details).
+ *
+ * Refer to @ref ble_bond_mgr_msc to see the flow of events when connecting to a central
+ * using the Bond Manager
+ *
+ *
+ * @section ble_sdk_lib_bond_manager_cfg Configuration File
+ * Applications using the Bond Manager must have a configuration file named ble_bondmngr_cfg.h.
+ * Here is an example of this file:
+ *
+ * @code
+ * #ifndef BLE_BONDMNGR_CFG_H__
+ * #define BLE_BONDMNGR_CFG_H__
+ *
+ * #define BLE_BONDMNGR_CCCD_COUNT 1
+ * #define BLE_BONDMNGR_MAX_BONDED_CENTRALS 4
+ *
+ * #endif // BLE_BONDMNGR_CFG_H__
+ * @endcode
+ *
+ * BLE_BONDMNGR_CCCD_COUNT is the number of CCCDs used in the application, and
+ * BLE_BONDMNGR_MAX_BONDED_CENTRALS is the maximum number of bonded centrals to be supported by the
+ * application.
+ */
+
+#ifndef BLE_BONDMNGR_H__
+#define BLE_BONDMNGR_H__
+
+#include <stdint.h>
+#include "nordic_global.h"
+#include "ble.h"
+#include "ble_srv_common.h"
+
+
+/** @defgroup ble_bond_mgr_msc Message Sequence Charts
+ * @{
+ * @brief Bond Manager interaction with S110 Stack
+ * @{
+ * @defgroup UNBONDED_CENTRAL Connecting to an unbonded central
+ * @image html bond_manager_unbonded_master.jpg Connecting to an unbonded central
+ * @defgroup BONDED_CENTRAL Connecting to a bonded central
+ * @image html bond_manager_bonded_master.jpg Connecting to a bonded central
+ * @}
+ * @}
+ */
+
+/** @defgroup DEFINES Defines
+ * @brief Macros defined by this module.
+ * @{ */
+
+#define INVALID_CENTRAL_HANDLE (-1) /**< Invalid handle, used to indicate that the central is not a known bonded central. */
+
+/** @} */
+
+/** @defgroup ENUMS Enumerations
+ * @brief Enumerations defined by this module.
+ * @{ */
+
+/**@brief Bond Manager Module event type. */
+typedef enum
+{
+ BLE_BONDMNGR_EVT_NEW_BOND, /**< New bond has been created. */
+ BLE_BONDMNGR_EVT_CONN_TO_BONDED_CENTRAL, /**< Connected to a previously bonded central. */
+ BLE_BONDMNGR_EVT_ENCRYPTED, /**< Current link is encrypted. */
+ BLE_BONDMNGR_EVT_AUTH_STATUS_UPDATED, /**< Authentication status updated for current central. */
+ BLE_BONDMNGR_EVT_BOND_FLASH_FULL /**< Flash block for storing Bonding Information is full. */
+} ble_bondmngr_evt_type_t;
+
+/** @} */
+
+
+/** @defgroup DATA_STRUCTURES Data Structures
+ * @brief Data Structures defined by this module.
+ * @{ */
+
+/**@brief Bond Manager Module event. */
+typedef struct
+{
+ ble_bondmngr_evt_type_t evt_type; /**< Type of event. */
+ int8_t central_handle; /**< Handle to the current central. This is an index to the central list maintained internally by the bond manager. */
+ uint16_t central_id; /**< Identifier to the central. This will be the same as Encryption diversifier of the central (see @ref ble_gap_evt_sec_info_request_t). This value is constant for the duration of the bond. */
+} ble_bondmngr_evt_t;
+
+/** @} */
+
+/** @defgroup TYPEDEFS Typedefs
+ * @brief Typedefs defined by this module.
+ * @{ */
+
+/**@brief Bond Manager Module event handler type. */
+typedef void (*ble_bondmngr_evt_handler_t) (ble_bondmngr_evt_t * p_evt);
+
+/** @} */
+
+/** @addtogroup DATA_STRUCTURES
+ * @{ */
+
+/**@brief Bond Manager Module init structure. This contains all options and data needed for
+ * initialization of the Bond Manager module. */
+typedef struct
+{
+ uint8_t flash_page_num_bond; /**< Flash page number to use for storing Bonding Information. */
+ uint8_t flash_page_num_sys_attr; /**< Flash page number to use for storing System Attributes. */
+ bool bonds_delete; /**< TRUE if bonding and System Attributes for all centrals is to be deleted from flash during initialization, FALSE otherwise. */
+ ble_bondmngr_evt_handler_t evt_handler; /**< Event handler to be called for handling events in bond manager. */
+ ble_srv_error_handler_t error_handler; /**< Function to be called in case of an error. */
+} ble_bondmngr_init_t;
+
+/** @} */
+
+
+/** @defgroup FUNCTIONS Functions
+ * @brief Functions/APIs implemented and exposed by this module.
+ * @{ */
+
+/**@brief Function for initializing the Bond Manager.
+ *
+ * @param[in] p_init This contains information needed to initialize this module.
+ *
+ * @return NRF_SUCCESS on successful initialization, otherwise an error code.
+ */
+uint32_t ble_bondmngr_init(ble_bondmngr_init_t * p_init);
+
+/**@brief Function for handling all events from the BLE stack that relate to this module.
+ *
+ * @param[in] p_ble_evt The event received from the BLE stack.
+ *
+ * @return NRF_SUCCESS if all operations went successfully,
+ * NRF_ERROR_NO_MEM if the maximum number of bonded centrals has been reached.
+ * Other error codes in other situations.
+ */
+void ble_bondmngr_on_ble_evt(ble_evt_t * p_ble_evt);
+
+/**@brief Function for storing the bonded centrals data including bonding info and System Attributes into
+ * flash memory.
+ *
+ * @details If the data to be written is different from the existing data, this function erases the
+ * flash pages before writing to flash.
+ *
+ * @warning This function could prevent the radio from running. Therefore it MUST be called ONLY
+ * when the application knows that the <i>Bluetooth</i> radio is not active. An example of
+ * such a state is when the application has received the Disconnected event and has not yet
+ * started advertising. <b>If it is called in any other state, or if it is not called at
+ * all, the behavior is undefined.</b>
+ *
+ * @return NRF_SUCCESS on success, an error_code otherwise.
+ */
+uint32_t ble_bondmngr_bonded_centrals_store(void);
+
+/**@brief Function for deleting the bonded central database from flash.
+ *
+ * @details After calling this function you should call ble_bondmngr_init() to re-initialize the
+ * RAM database.
+ *
+ * @return NRF_SUCCESS on success, an error_code otherwise.
+ */
+uint32_t ble_bondmngr_bonded_centrals_delete(void);
+
+/**@brief Function for getting the whitelist containing all currently bonded centrals.
+ *
+ * @details This function populates the whitelist with either the IRKs or the public adresses
+ * of all bonded centrals.
+ *
+ * @param[out] p_whitelist Whitelist structure with all bonded centrals.
+ *
+ * @return NRF_SUCCESS on success, an error_code otherwise.
+ */
+uint32_t ble_bondmngr_whitelist_get(ble_gap_whitelist_t * p_whitelist);
+
+/**@brief Function for getting the central's address corresponding to a given central_handle.
+ *
+ * @note This function returns NRF_ERROR_INVALID_PARAM if the given central has a private
+ * address.
+ *
+ * @param[in] central_handle Central's handle.
+ * @param[out] p_central_addr Pointer to the central's address which can be used for
+ * directed advertising.
+ */
+uint32_t ble_bondmngr_central_addr_get(int8_t central_handle, ble_gap_addr_t * p_central_addr);
+
+/**@brief Function for storing the System Attributes of a newly connected central.
+ *
+ * @details This function fetches the System Attributes of the current central from the stack, adds
+ * it to the database in memory, and also stores it in the flash (without erasing any
+ * flash page).
+ * This function is intended to facilitate the storage of System Attributes when connected
+ * to new central (whose System Attributes are NOT yet stored in flash) even in connected
+ * state without affecting radio link. This function can, for example, be called after the
+ * CCCD is written by a central. The function will succeed if the central is a new central.
+ * See @ref ble_sdk_app_hids_keyboard or @ref ble_sdk_app_hids_mouse for sample usage.
+ *
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ * NRF_ERROR_INVALID_STATE is returned if the System Attributes of the current central is
+ * already present in the flash because it is a previously known central.
+ */
+uint32_t ble_bondmngr_sys_attr_store(void);
+
+/**@brief Function for fetching the identifiers of known centrals.
+ *
+ * @details This function fetches the identifiers of the centrals that are currently in the
+ * database, or in other words, known to the bond manager.
+ *
+ * @param[out] p_central_ids Pointer to the array of central identifiers. It is recommended
+ * that the length of this array be equal to
+ * MAX_NUMBER_OF_BONDED_CENTRALS * 2 bytes. If value of this pointer
+ * is NULL, only the number of centrals in the database will be
+ * filled in p_length. This can be used to find out the
+ * required size of the array pointed to by p_central_ids in
+ * a subsequent call.
+ * @param[in, out] p_length Pointer to the length of p_central_ids array provided as
+ * input. On return, this function will write the number of central
+ * identifiers found to p_length
+ *
+ * @return NRF_SUCCESS on success.
+ * NRF_ERROR_NULL if the input parameter p_length is NULL.
+ * NRF_ERROR_INVALID_STATE is returned if the bond manager was not initialized.
+ * NRF_ERROR_DATA_SIZE is returned if the length of the input parameter
+ * p_central_ids provided is not enough to fit in all the central identifiers in the
+ * database.
+ */
+uint32_t ble_bondmngr_central_ids_get(uint16_t * p_central_ids, uint16_t * p_length);
+
+/**@brief Function for deleting a single central from the database.
+ * @details This function deletes the Bonding Information and System Attributes of a single
+ * central from the flash.
+ * The application can use the @ref ble_bondmngr_central_ids_get function to fetch the
+ * identifiers of centrals present in the database and then call this function.
+ *
+ * @warning This function could prevent the radio from running. Therefore it MUST be called ONLY
+ * when the application knows that the <i>Bluetooth</i> radio is not active. An example
+ * of such a state could be when the application is not in a connected state AND is
+ * also not advertising. <b>If it is called in any other state, the behavior is
+ * undefined.</b>
+ *
+ * @param[in] central_id Identifier of the central to be deleted.
+ *
+ * @return NRF_SUCCESS on success.
+ * NRF_ERROR_INVALID_STATE is returned if the bond manager was not initialized.
+ * NRF_ERROR_NOT_FOUND if the central with the given identifier is not found in the
+ * database.
+ */
+uint32_t ble_bondmngr_bonded_central_delete(uint16_t central_id);
+
+/**@brief Function to verify encryption status link with bonded central is encrypted or not.
+ * @details This function provides status of encrption of the link with a bonded central.
+ * Its is recommended that the application can use the
+ * @ref ble_bondmngr_central_ids_get function to verify if the central is in the
+ * database and then call this function.
+ *
+ * @warning Currently the central id paramater is unused and is added only for future extension.
+ * As, today only one link is permitted for the peripheral device, status of current
+ * link is provided. In future, with more possibilities in the topology, central_id
+ * will be needed to identify the central.
+ *
+ * @param[out] status Status of encryption, true implies link encrypted.
+ *
+ * @return NRF_SUCCESS on success.
+ * NRF_ERROR_INVALID_STATE is returned if the bond manager was not initialized.
+ */
+uint32_t ble_bondmngr_is_link_encrypted(bool * status);
+
+/** @} */
+
+#endif // BLE_BONDMNGR_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_central_bondmngr.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_central_bondmngr.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,26 @@
+#ifndef __BLE_CENTRAL_BONDMNGR_H_
+#define __BLE_CENTRAL_BONDMNGR_H_
+
+#include "nordic_global.h"
+#include "ble.h"
+#include "ble_gap.h"
+
+#include <stdint.h>
+#include <stdbool.h>
+
+typedef struct
+{
+ ble_gap_sec_params_t * p_sec_params;
+} ble_central_bondmngr_t;
+
+typedef struct
+{
+ ble_gap_sec_params_t * p_sec_params;
+ bool delete_bonds;
+} ble_central_bondmngr_init_t;
+
+uint32_t ble_central_bondmngr_init(ble_central_bondmngr_t * p_bm, ble_central_bondmngr_init_t * p_bm_init);
+void ble_central_bondmngr_on_ble_evt(ble_central_bondmngr_t * p_bm, ble_evt_t * p_ble_evt);
+uint32_t ble_central_bondmngr_store(ble_central_bondmngr_t * p_bm);
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_conn_params.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_conn_params.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,112 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_sdk_lib_conn_params Connection Parameters Negotiation
+ * @{
+ * @ingroup ble_sdk_lib
+ * @brief Module for initiating and executing a connection parameters negotiation procedure.
+ */
+
+#ifndef BLE_CONN_PARAMS_H__
+#define BLE_CONN_PARAMS_H__
+
+#include <stdint.h>
+#include "nordic_global.h"
+#include "ble.h"
+#include "ble_srv_common.h"
+
+/**@brief Connection Parameters Module event type. */
+typedef enum
+{
+ BLE_CONN_PARAMS_EVT_FAILED , /**< Negotiation procedure failed. */
+ BLE_CONN_PARAMS_EVT_SUCCEEDED /**< Negotiation procedure succeeded. */
+} ble_conn_params_evt_type_t;
+
+/**@brief Connection Parameters Module event. */
+typedef struct
+{
+ ble_conn_params_evt_type_t evt_type; /**< Type of event. */
+} ble_conn_params_evt_t;
+
+/**@brief Connection Parameters Module event handler type. */
+typedef void (*ble_conn_params_evt_handler_t) (ble_conn_params_evt_t * p_evt);
+
+/**@brief Connection Parameters Module init structure. This contains all options and data needed for
+ * initialization of the connection parameters negotiation module. */
+typedef struct
+{
+ ble_gap_conn_params_t * p_conn_params; /**< Pointer to the connection parameters desired by the application. When calling ble_conn_params_init, if this parameter is set to NULL, the connection parameters will be fetched from host. */
+ uint32_t first_conn_params_update_delay; /**< Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (in number of timer ticks). */
+ uint32_t next_conn_params_update_delay; /**< Time between each call to sd_ble_gap_conn_param_update after the first (in number of timer ticks). Recommended value 30 seconds as per BLUETOOTH SPECIFICATION Version 4.0. */
+ uint8_t max_conn_params_update_count; /**< Number of attempts before giving up the negotiation. */
+ uint16_t start_on_notify_cccd_handle; /**< If procedure is to be started when notification is started, set this to the handle of the corresponding CCCD. Set to BLE_GATT_HANDLE_INVALID if procedure is to be started on connect event. */
+ bool disconnect_on_fail; /**< Set to TRUE if a failed connection parameters update shall cause an automatic disconnection, set to FALSE otherwise. */
+ ble_conn_params_evt_handler_t evt_handler; /**< Event handler to be called for handling events in the Battery Service. */
+ ble_srv_error_handler_t error_handler; /**< Function to be called in case of an error. */
+} ble_conn_params_init_t;
+
+
+/**@brief Function for initializing the Connection Parameters module.
+ *
+ * @note If the negotiation procedure should be triggered when notification/indication of
+ * any characteristic is enabled by the peer, then this function must be called after
+ * having initialized the services.
+ *
+ * @param[in] p_init This contains information needed to initialize this module.
+ *
+ * @return NRF_SUCCESS on successful initialization, otherwise an error code.
+ */
+uint32_t ble_conn_params_init(const ble_conn_params_init_t * p_init);
+
+/**@brief Function for stopping the Connection Parameters module.
+ *
+ * @details This function is intended to be used by the application to clean up the connection
+ * parameters update module. This will stop the connection parameters update timer if
+ * running, thereby preventing any impending connection parameters update procedure. This
+ * function must be called by the application when it needs to clean itself up (for
+ * example, before disabling the bluetooth SoftDevice) so that an unwanted timer expiry
+ * event can be avoided.
+ *
+ * @return NRF_SUCCESS on successful initialization, otherwise an error code.
+ */
+uint32_t ble_conn_params_stop(void);
+
+/**@brief Function for changing the current connection parameters to a new set.
+ *
+ * @details Use this function to change the connection parameters to a new set of parameter
+ * (ie different from the ones given at init of the module).
+ * This function is usefull for scenario where most of the time the application
+ * needs a relatively big connection interval, and just sometimes, for a temporary
+ * period requires shorter connection interval, for example to transfer a higher
+ * amount of data.
+ * If the given parameters does not match the current connection's parameters
+ * this function initiates a new negotiation.
+ *
+ * @param[in] new_params This contains the new connections parameters to setup.
+ *
+ * @return NRF_SUCCESS on successful initialization, otherwise an error code.
+ */
+uint32_t ble_conn_params_change_conn_params(ble_gap_conn_params_t *new_params);
+
+/**@brief Function for handling the Application's BLE Stack events.
+ *
+ * @details Handles all events from the BLE stack that are of interest to this module.
+ *
+ * @param[in] p_ble_evt The event received from the BLE stack.
+ */
+void ble_conn_params_on_ble_evt(ble_evt_t * p_ble_evt);
+
+#endif // BLE_CONN_PARAMS_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_date_time.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_date_time.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,77 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+*
+* The information contained herein is property of Nordic Semiconductor ASA.
+* Terms and conditions of usage are described in detail in NORDIC
+* SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+*
+* Licensees are granted free, non-transferable use of the information. NO
+* WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+* the file.
+*/
+
+/* Attention!
+* To maintain compliance with Nordic Semiconductor ASA�s Bluetooth profile
+* qualification listings, this section of source code must not be modified.
+*/
+
+/** @file
+ * @brief Contains definition of ble_date_time structure.
+ */
+
+/** @file
+ *
+ * @defgroup ble_sdk_srv_date_time BLE Date Time characteristic type
+ * @{
+ * @ingroup ble_sdk_srv
+ * @brief Definition of ble_date_time_t type.
+ */
+
+#ifndef BLE_DATE_TIME_H__
+#define BLE_DATE_TIME_H__
+
+#include <stdint.h>
+#include "nordic_global.h"
+
+/**@brief Date and Time structure. */
+typedef struct
+{
+ uint16_t year;
+ uint8_t month;
+ uint8_t day;
+ uint8_t hours;
+ uint8_t minutes;
+ uint8_t seconds;
+} ble_date_time_t;
+
+static __INLINE uint8_t ble_date_time_encode(const ble_date_time_t * p_date_time,
+ uint8_t * p_encoded_data)
+{
+ uint8_t len = uint16_encode(p_date_time->year, p_encoded_data);
+
+ p_encoded_data[len++] = p_date_time->month;
+ p_encoded_data[len++] = p_date_time->day;
+ p_encoded_data[len++] = p_date_time->hours;
+ p_encoded_data[len++] = p_date_time->minutes;
+ p_encoded_data[len++] = p_date_time->seconds;
+
+ return len;
+}
+
+static __INLINE uint8_t ble_date_time_decode(ble_date_time_t * p_date_time,
+ const uint8_t * p_encoded_data)
+{
+ uint8_t len = sizeof(uint16_t);
+
+ p_date_time->year = uint16_decode(p_encoded_data);
+ p_date_time->month = p_encoded_data[len++];
+ p_date_time->day = p_encoded_data[len++];
+ p_date_time->hours = p_encoded_data[len++];
+ p_date_time->minutes = p_encoded_data[len++];
+ p_date_time->seconds = p_encoded_data[len++];
+
+ return len;
+}
+
+#endif // BLE_DATE_TIME_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_debug_assert_handler.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_debug_assert_handler.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,49 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_debug_assert_handler Assert Handler for debug purposes.
+ * @{
+ * @ingroup ble_sdk_lib
+ * @brief Module for handling of assert during application development when debugging.
+ *
+ * @details This module may be used during development of an application to facilitate debugging.
+ * It contains a function to write file name, line number and the Stack Memory to flash.
+ * This module is ONLY for debugging purposes and must never be used in final product.
+ *
+ */
+
+#ifndef BLE_DEBUG_ASSERT_HANDLER_H__
+#define BLE_DEBUG_ASSERT_HANDLER_H__
+
+#include <stdint.h>
+#include "nordic_global.h"
+
+/**@brief Function for handling the Debug assert, which can be called from an error handler.
+ * To be used only for debugging purposes.
+ *
+ *@details This code will copy the filename and line number into local variables for them to always
+ * be accessible in Keil debugger. The function will also write the ARM Cortex-M0 stack
+ * memory into flash where it can be retrieved and manually un-winded in order to
+ * back-trace the location where the error ocured.<br>
+ * @warning <b>ALL INTERRUPTS WILL BE DISABLED.</b>
+ *
+ * @note This function will never return but loop forever for debug purposes.
+ *
+ * @param[in] error_code Error code supplied to the handler.
+ * @param[in] line_num Line number where the original handler is called.
+ * @param[in] p_file_name Pointer to the file name.
+ */
+void ble_debug_assert_handler(uint32_t error_code, uint32_t line_num, const uint8_t * p_file_name);
+
+#endif /* BLE_DEBUG_ASSERT_HANDLER_H__ */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_dtm.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_dtm.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,142 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_sdk_dtmlib_dtm DTM - Direct Test Mode
+ * @{
+ * @ingroup ble_sdk_lib
+ * @brief Module for testing RF/PHY using DTM commands.
+ */
+
+#ifndef BLE_DTM_H__
+#define BLE_DTM_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nordic_global.h"
+
+
+/**@brief Configuration parameters. */
+#define DEFAULT_TX_POWER RADIO_TXPOWER_TXPOWER_Pos4dBm /**< Default Transmission power using in the DTM module. */
+#define DEFAULT_TIMER NRF_TIMER0 /**< Default timer used for timing. */
+#define DEFAULT_TIMER_IRQn TIMER0_IRQn /**< IRQ used for timer. NOTE: MUST correspond to DEFAULT_TIMER. */
+
+/**@brief BLE DTM command codes. */
+typedef uint32_t dtm_cmd_t; /**< DTM command type. */
+
+#define LE_RESET 0 /**< DTM command: Reset device. */
+#define LE_RECEIVER_TEST 1 /**< DTM command: Start receive test. */
+#define LE_TRANSMITTER_TEST 2 /**< DTM command: Start transmission test. */
+#define LE_TEST_END 3 /**< DTM command: End test and send packet report. */
+
+// Configuration options used as parameter 2
+// when cmd == LE_TRANSMITTER_TEST and payload == DTM_PKT_VENDORSPECIFIC
+// Configuration value, if any, is supplied in parameter 3
+
+#define CARRIER_TEST 0 /**< Length=0 indicates a constant, unmodulated carrier until LE_TEST_END or LE_RESET */
+#define CARRIER_TEST_STUDIO 1 /**< nRFgo Studio uses value 1 in length field, to indicate a constant, unmodulated carrier until LE_TEST_END or LE_RESET */
+#define SET_TX_POWER 2 /**< Set transmission power, value -40..+4 dBm in steps of 4 */
+#define SELECT_TIMER 3 /**< Select on of the 16 MHz timers 0, 1 or 2 */
+
+#define LE_PACKET_REPORTING_EVENT 0x8000 /**< DTM Packet reporting event, returned by the device to the tester. */
+#define LE_TEST_STATUS_EVENT_SUCCESS 0x0000 /**< DTM Status event, indicating success. */
+#define LE_TEST_STATUS_EVENT_ERROR 0x0001 /**< DTM Status event, indicating an error. */
+
+#define DTM_PKT_PRBS9 0x00 /**< Bit pattern PRBS9. */
+#define DTM_PKT_0X0F 0x01 /**< Bit pattern 11110000 (LSB is the leftmost bit). */
+#define DTM_PKT_0X55 0x02 /**< Bit pattern 10101010 (LSB is the leftmost bit). */
+#define DTM_PKT_VENDORSPECIFIC 0xFFFFFFFF /**< Vendor specific. Nordic: Continuous carrier test, or configuration. */
+
+/**@brief Return codes from dtm_cmd(). */
+#define DTM_SUCCESS 0x00 /**< Indicate that the DTM function completed with success. */
+#define DTM_ERROR_ILLEGAL_CHANNEL 0x01 /**< Physical channel number must be in the range 0..39. */
+#define DTM_ERROR_INVALID_STATE 0x02 /**< Sequencing error: Command is not valid now. */
+#define DTM_ERROR_ILLEGAL_LENGTH 0x03 /**< Payload size must be in the range 0..37. */
+#define DTM_ERROR_ILLEGAL_CONFIGURATION 0x04 /**< Parameter out of range (legal range is function dependent). */
+#define DTM_ERROR_UNINITIALIZED 0x05 /**< DTM module has not been initialized by the application. */
+
+// Note: DTM_PKT_VENDORSPECIFIC, is not a packet type
+#define PACKET_TYPE_MAX DTM_PKT_0X55 /**< Highest value allowed as DTM Packet type. */
+
+/** @brief BLE DTM event type. */
+typedef uint32_t dtm_event_t; /**< Type for handling DTM event. */
+
+/** @brief BLE DTM frequency type. */
+typedef uint32_t dtm_freq_t; /**< Physical channel, valid range: 0..39. */
+
+/**@brief BLE DTM packet types. */
+typedef uint32_t dtm_pkt_type_t; /**< Type for holding the requested DTM payload type.*/
+
+
+/**@brief Function for initializing or re-initializing DTM module
+ *
+ * @return DTM_SUCCESS on successful initialization of the DTM module.
+*/
+uint32_t dtm_init(void);
+
+
+/**@brief Function for giving control to dtmlib for handling timer and radio events.
+ * Will return to caller at 625us intervals or whenever another event than radio occurs
+ * (such as UART input). Function will put MCU to sleep between events.
+ *
+ * @return Time counter, incremented every 625 us.
+ */
+uint32_t dtm_wait(void);
+
+
+/**@brief Function for calling when a complete command has been prepared by the Tester.
+ *
+ * @param[in] cmd One of the DTM_CMD values (bits 14:15 in the 16-bit UART format).
+ * @param[in] freq Phys. channel no - actual frequency = (2402 + freq * 2) MHz (bits 8:13 in
+ * the 16-bit UART format).
+ * @param[in] length Payload length, 0..37 (bits 2:7 in the 16-bit UART format).
+ * @param[in] payload One of the DTM_PKT values (bits 0:1 in the 16-bit UART format).
+ *
+ * @return DTM_SUCCESS or one of the DTM_ERROR_ values
+ */
+uint32_t dtm_cmd(dtm_cmd_t cmd, dtm_freq_t freq, uint32_t length, dtm_pkt_type_t payload);
+
+
+/**@brief Function for reading the result of a DTM command
+ *
+ * @param[out] p_dtm_event Pointer to buffer for 16 bit event code according to DTM standard.
+ *
+ * @return true: new event, false: no event since last call, this event has been read earlier
+ */
+bool dtm_event_get(dtm_event_t * p_dtm_event);
+
+
+/**@brief Function for configuring the timer to use.
+ *
+ * @note Must be called when no DTM test is running.
+ *
+ * @param[in] new_timer Index (0..2) of timer to be used by the DTM library
+ *
+ * @return true: success, new timer was selected, false: parameter error
+ */
+bool dtm_set_timer(uint32_t new_timer);
+
+
+/**@brief Function for configuring the transmit power.
+ *
+ * @note Must be called when no DTM test is running.
+ *
+ * @param[in] new_tx_power New output level, +4..-40, in steps of 4.
+ *
+ * @return true: tx power setting changed, false: parameter error
+ */
+bool dtm_set_txpower(uint32_t new_tx_power);
+
+#endif // BLE_DTM_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_error_log.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_error_log.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,70 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_error_log_module Error Log Module
+ * @{
+ * @ingroup ble_sdk_lib
+ * @brief Module for writing error and stack to flash memory.
+ *
+ * @details It contains functions for writing an error code, line number, filename/message and
+ * the stack to the flash during an error, e.g. in the assert handler.
+ *
+ */
+#ifndef BLE_ERROR_LOG_H__
+#define BLE_ERROR_LOG_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "ble_flash.h"
+#include "nordic_global.h"
+
+#define ERROR_MESSAGE_LENGTH 128 /**< Length of error message to stored. */
+#define STACK_DUMP_LENGTH 256 /**< Length of stack to be stored at max: 64 entries of 4 bytes each. */
+#define FLASH_PAGE_ERROR_LOG (BLE_FLASH_PAGE_END - 2) /**< Address in flash where stack trace can be stored. */
+
+/**@brief Error Log Data structure.
+ *
+ * @details The structure contains the error, message/filename, line number as well as the current
+ * stack, at the time where an error occured.
+ */
+typedef struct
+{
+ uint16_t failure; /**< Indication that a major failure has occurred during last execution of the application. */
+ uint16_t line_number; /**< Line number indicating at which line the failure occurred. */
+ uint32_t err_code; /**< Error code when failure occurred. */
+ uint8_t message[ERROR_MESSAGE_LENGTH]; /**< Will just use the first 128 bytes of filename to store for debugging purposes. */
+ uint32_t stack_info[STACK_DUMP_LENGTH / 4]; /**< Will contain stack information, can be manually unwinded for debug purposes. */
+} ble_error_log_data_t;
+
+
+/**@brief Function for writing the file name/message, line number, and current program stack
+ * to flash.
+ *
+ * @note This function will force the writing to flash, and disregard any radio communication.
+ * USE THIS FUNCTION WITH CARE.
+ *
+ * @param[in] err_code Error code to be logged.
+ * @param[in] p_message Message to be written to the flash together with stack dump, usually
+ * the file name where the error occured.
+ * @param[in] line_number Line number where the error occured.
+ *
+ * @return NRF_SUCCESS on successful writing of the error log.
+ *
+ */
+uint32_t ble_error_log_write(uint32_t err_code, const uint8_t * p_message, uint16_t line_number);
+
+
+#endif /* BLE_ERROR_LOG_H__ */
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_flash.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_flash.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,143 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_flash_module Flash Manager
+ * @{
+ * @ingroup ble_sdk_lib
+ * @brief Module for accessing flash memory.
+ *
+ * @details It contains functions for reading, writing and erasing one page in flash.
+ *
+ * The module uses the first 32 bits of the flash page to write a magic number in order to
+ * determine if the page has been written or not.
+ *
+ * @note Be careful not to use a page number in the SoftDevice area (which currently occupies the
+ * range 0 to 127), or in your application space! In both cases, this would end up
+ * with a hard fault.
+ */
+
+#ifndef BLE_FLASH_H__
+#define BLE_FLASH_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <nrf51.h>
+#include "nordic_global.h"
+
+#define BLE_FLASH_PAGE_SIZE ((uint16_t)NRF_FICR->CODEPAGESIZE) /**< Size of one flash page. */
+#define BLE_FLASH_MAGIC_NUMBER 0x45DE0000 /**< Magic value to identify if flash contains valid data. */
+#define BLE_FLASH_EMPTY_MASK 0xFFFFFFFF /**< Bit mask that defines an empty address in flash. */
+
+
+/**@brief Macro for getting the end of the flash available for application.
+ *
+ * @details The result flash page number indicates the end boundary of the flash available
+ * to the application. If a bootloader is used, the end will be the start of the
+ * bootloader region. Otherwise, the end will be the size of the flash.
+ */
+#define BLE_FLASH_PAGE_END \
+ ((NRF_UICR->BOOTLOADERADDR != BLE_FLASH_EMPTY_MASK) \
+ ? (NRF_UICR->BOOTLOADERADDR / BLE_FLASH_PAGE_SIZE) \
+ : NRF_FICR->CODESIZE)
+
+/**@brief Function for erasing the specified flash page, and then writes the given data to this page.
+ *
+ * @warning This operation blocks the CPU. DO NOT use while in a connection!
+ *
+ * @param[in] page_num Page number to update.
+ * @param[in] p_in_array Pointer to a RAM area containing the elements to write in flash.
+ * This area has to be 32 bits aligned.
+ * @param[in] word_count Number of 32 bits words to write in flash.
+ *
+ * @return NRF_SUCCESS on successful flash write, otherwise an error code.
+ */
+uint32_t ble_flash_page_write(uint8_t page_num, uint32_t * p_in_array, uint8_t word_count);
+
+/**@brief Function for reading data from flash to RAM.
+ *
+ * @param[in] page_num Page number to read.
+ * @param[out] p_out_array Pointer to a RAM area where the found data will be written.
+ * This area has to be 32 bits aligned.
+ * @param[out] p_word_count Number of 32 bits words read.
+ *
+ * @return NRF_SUCCESS on successful upload, NRF_ERROR_NOT_FOUND if no valid data has been found
+ * in flash (first 32 bits not equal to the MAGIC_NUMBER+CRC).
+ */
+uint32_t ble_flash_page_read(uint8_t page_num, uint32_t * p_out_array, uint8_t * p_word_count);
+
+/**@brief Function for erasing a flash page.
+ *
+ * @note This operation blocks the CPU, so it should not be done while the radio is running!
+ *
+ * @param[in] page_num Page number to erase.
+ *
+ * @return NRF_SUCCESS on success, an error_code otherwise.
+ */
+uint32_t ble_flash_page_erase(uint8_t page_num);
+
+/**@brief Function for writing one word to flash.
+ *
+ * @note Flash location to be written must have been erased previously.
+ *
+ * @param[in] p_address Pointer to flash location to be written.
+ * @param[in] value Value to write to flash.
+ *
+ * @return NRF_SUCCESS.
+ */
+uint32_t ble_flash_word_write(uint32_t * p_address, uint32_t value);
+
+/**@brief Function for writing a data block to flash.
+ *
+ * @note Flash locations to be written must have been erased previously.
+ *
+ * @param[in] p_address Pointer to start of flash location to be written.
+ * @param[in] p_in_array Pointer to start of flash block to be written.
+ * @param[in] word_count Number of words to be written.
+ *
+ * @return NRF_SUCCESS.
+ */
+uint32_t ble_flash_block_write(uint32_t * p_address, uint32_t * p_in_array, uint16_t word_count);
+
+/**@brief Function for computing pointer to start of specified flash page.
+ *
+ * @param[in] page_num Page number.
+ * @param[out] pp_page_addr Pointer to start of flash page.
+ *
+ * @return NRF_SUCCESS.
+ */
+uint32_t ble_flash_page_addr(uint8_t page_num, uint32_t ** pp_page_addr);
+
+/**@brief Function for calculating a 16 bit CRC using the CRC-16-CCITT scheme.
+ *
+ * @param[in] p_data Pointer to data on which the CRC is to be calulated.
+ * @param[in] size Number of bytes on which the CRC is to be calulated.
+ * @param[in] p_crc Initial CRC value (if NULL, a preset value is used as the initial value).
+ *
+ * @return Calculated CRC.
+ */
+uint16_t ble_flash_crc16_compute(uint8_t * p_data, uint16_t size, uint16_t * p_crc);
+
+/**@brief Function for handling flashing module Radio Notification event.
+ *
+ * @note For flash writing to work safely while in a connection or while advertising, this function
+ * MUST be called from the Radio Notification module's event handler (see
+ * @ref ble_radio_notification for details).
+ *
+ * @param[in] radio_active TRUE if radio is active (or about to become active), FALSE otherwise.
+ */
+void ble_flash_on_radio_active_evt(bool radio_active);
+
+#endif // BLE_FLASH_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_racp.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_racp.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,98 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ */
+
+/** @file
+ *
+ * @defgroup ble_sdk_lib_racp Record Access Control Point
+ * @{
+ * @ingroup ble_sdk_lib
+ * @brief Record Access Control Point library.
+ */
+
+#ifndef BLE_RACP_H__
+#define BLE_RACP_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nordic_global.h"
+#include "ble.h"
+#include "ble_types.h"
+#include "ble.h"
+
+/**@brief Record Access Control Point opcodes. */
+#define RACP_OPCODE_RESERVED 0 /**< Record Access Control Point opcode - Reserved for future use. */
+#define RACP_OPCODE_REPORT_RECS 1 /**< Record Access Control Point opcode - Report stored records. */
+#define RACP_OPCODE_DELETE_RECS 2 /**< Record Access Control Point opcode - Delete stored records. */
+#define RACP_OPCODE_ABORT_OPERATION 3 /**< Record Access Control Point opcode - Abort operation. */
+#define RACP_OPCODE_REPORT_NUM_RECS 4 /**< Record Access Control Point opcode - Report number of stored records. */
+#define RACP_OPCODE_NUM_RECS_RESPONSE 5 /**< Record Access Control Point opcode - Number of stored records response. */
+#define RACP_OPCODE_RESPONSE_CODE 6 /**< Record Access Control Point opcode - Response code. */
+
+/**@brief Record Access Control Point operators. */
+#define RACP_OPERATOR_NULL 0 /**< Record Access Control Point operator - Null. */
+#define RACP_OPERATOR_ALL 1 /**< Record Access Control Point operator - All records. */
+#define RACP_OPERATOR_LESS_OR_EQUAL 2 /**< Record Access Control Point operator - Less than or equal to. */
+#define RACP_OPERATOR_GREATER_OR_EQUAL 3 /**< Record Access Control Point operator - Greater than or equal to. */
+#define RACP_OPERATOR_RANGE 4 /**< Record Access Control Point operator - Within range of (inclusive). */
+#define RACP_OPERATOR_FIRST 5 /**< Record Access Control Point operator - First record (i.e. oldest record). */
+#define RACP_OPERATOR_LAST 6 /**< Record Access Control Point operator - Last record (i.e. most recent record). */
+#define RACP_OPERATOR_RFU_START 7 /**< Record Access Control Point operator - Start of Reserved for Future Use area. */
+
+/**@brief Record Access Control Point response codes. */
+#define RACP_RESPONSE_RESERVED 0 /**< Record Access Control Point response code - Reserved for future use. */
+#define RACP_RESPONSE_SUCCESS 1 /**< Record Access Control Point response code - Successful operation. */
+#define RACP_RESPONSE_OPCODE_UNSUPPORTED 2 /**< Record Access Control Point response code - Unsupported op code received. */
+#define RACP_RESPONSE_INVALID_OPERATOR 3 /**< Record Access Control Point response code - Operator not valid for service. */
+#define RACP_RESPONSE_OPERATOR_UNSUPPORTED 4 /**< Record Access Control Point response code - Unsupported operator. */
+#define RACP_RESPONSE_INVALID_OPERAND 5 /**< Record Access Control Point response code - Operand not valid for service. */
+#define RACP_RESPONSE_NO_RECORDS_FOUND 6 /**< Record Access Control Point response code - No matching records found. */
+#define RACP_RESPONSE_ABORT_FAILED 7 /**< Record Access Control Point response code - Abort could not be completed. */
+#define RACP_RESPONSE_PROCEDURE_NOT_DONE 8 /**< Record Access Control Point response code - Procedure could not be completed. */
+#define RACP_RESPONSE_OPERAND_UNSUPPORTED 9 /**< Record Access Control Point response code - Unsupported operand. */
+
+/**@brief Record Access Control Point value structure. */
+typedef struct
+{
+ uint8_t opcode; /**< Op Code. */
+ uint8_t operator; /**< Operator. */
+ uint8_t operand_len; /**< Length of the operand. */
+ uint8_t * p_operand; /**< Pointer to the operand. */
+} ble_racp_value_t;
+
+/**@brief Function for decoding a Record Access Control Point write.
+ *
+ * @details This call decodes a write to the Record Access Control Point.
+ *
+ * @param[in] data_len Length of data in received write.
+ * @param[in] p_data Pointer to received data.
+ * @param[out] p_racp_val Pointer to decoded Record Access Control Point write.
+ * @note This does not do a data copy. It assumes the data pointed to by
+ * p_data is persistant until no longer needed.
+ */
+void ble_racp_decode(uint8_t data_len, uint8_t * p_data, ble_racp_value_t * p_racp_val);
+
+/**@brief Function for encoding a Record Access Control Point response.
+ *
+ * @details This call encodes a response from the Record Access Control Point response.
+ *
+ * @param[in] p_racp_val Pointer to Record Access Control Point to encode.
+ * @param[out] p_data Pointer to where encoded data is written.
+ * NOTE! It is calling routines respsonsibility to make sure.
+ *
+ * @return Length of encoded data.
+ */
+uint8_t ble_racp_encode(const ble_racp_value_t * p_racp_val, uint8_t * p_data);
+
+#endif // BLE_RACP_H__
+
+/** @} */
+
+/** @endcond */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_radio_notification.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_radio_notification.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,46 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ */
+
+/** @file
+ *
+ * @defgroup ble_radio_notification Radio Notification Event Handler
+ * @{
+ * @ingroup ble_sdk_lib
+ * @brief Module for propagating Radio Notification events to the application.
+ */
+
+#ifndef BLE_RADIO_NOTIFICATION_H__
+#define BLE_RADIO_NOTIFICATION_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nordic_global.h"
+#include "nrf_soc.h"
+
+/**@brief Application radio notification event handler type. */
+typedef void (*ble_radio_notification_evt_handler_t) (bool radio_active);
+
+/**@brief Function for initializing the Radio Notification module.
+ *
+ * @param[in] irq_priority Interrupt priority for the Radio Notification interrupt handler.
+ * @param[in] distance The time from an Active event until the radio is activated.
+ * @param[in] evt_handler Handler to be executed when a radio notification event has been
+ * received.
+ *
+ * @return NRF_SUCCESS on successful initialization, otherwise an error code.
+ */
+uint32_t ble_radio_notification_init(nrf_app_irq_priority_t irq_priority,
+ nrf_radio_notification_distance_t distance,
+ ble_radio_notification_evt_handler_t evt_handler);
+
+#endif // BLE_RADIO_NOTIFICATION_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_sensorsim.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_sensorsim.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,66 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_sdk_lib_sensorsim Sensor Data Simulator
+ * @{
+ * @ingroup ble_sdk_lib
+ * @brief Functions for simulating sensor data.
+ *
+ * @details Currently only a triangular waveform simulator is implemented.
+ */
+
+#ifndef BLE_SENSORSIM_H__
+#define BLE_SENSORSIM_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nordic_global.h"
+
+/**@brief Triangular waveform sensor simulator configuration. */
+typedef struct
+{
+ uint32_t min; /**< Minimum simulated value. */
+ uint32_t max; /**< Maximum simulated value. */
+ uint32_t incr; /**< Increment between each measurement. */
+ bool start_at_max; /**< TRUE is measurement is to start at the maximum value, FALSE if it is to start at the minimum. */
+} ble_sensorsim_cfg_t;
+
+/**@brief Triangular waveform sensor simulator state. */
+typedef struct
+{
+ uint32_t current_val; /**< Current sensor value. */
+ bool is_increasing; /**< TRUE if the simulator is in increasing state, FALSE otherwise. */
+} ble_sensorsim_state_t;
+
+/**@brief Function for initializing a triangular waveform sensor simulator.
+ *
+ * @param[out] p_state Current state of simulator.
+ * @param[in] p_cfg Simulator configuration.
+ */
+void ble_sensorsim_init(ble_sensorsim_state_t * p_state,
+ const ble_sensorsim_cfg_t * p_cfg);
+
+/**@brief Function for generating a simulated sensor measurement using a triangular waveform generator.
+ *
+ * @param[in,out] p_state Current state of simulator.
+ * @param[in] p_cfg Simulator configuration.
+ *
+ * @return Simulator output.
+ */
+uint32_t ble_sensorsim_measure(ble_sensorsim_state_t * p_state,
+ const ble_sensorsim_cfg_t * p_cfg);
+
+#endif // BLE_SENSORSIM_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_services/ble_srv_common.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/ble_services/ble_srv_common.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,235 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_sdk_srv_common 'Common service definitions'
+ * @{
+ * @ingroup ble_sdk_srv
+ * @brief Constants, type definitions and functions that are common to all services.
+ */
+
+#ifndef BLE_SRV_COMMON_H__
+#define BLE_SRV_COMMON_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nordic_global.h"
+#include "ble_types.h"
+#include "app_util.h"
+#include "ble_gap.h"
+#include "ble_gatt.h"
+
+/** @defgroup UUID_SERVICES Service UUID definitions
+ * @{ */
+#define BLE_UUID_ALERT_NOTIFICATION_SERVICE 0x1811 /**< Alert Notification service UUID. */
+#define BLE_UUID_BATTERY_SERVICE 0x180F /**< Battery service UUID. */
+#define BLE_UUID_BLOOD_PRESSURE_SERVICE 0x1810 /**< Blood Pressure service UUID. */
+#define BLE_UUID_CURRENT_TIME_SERVICE 0x1805 /**< Current Time service UUID. */
+#define BLE_UUID_CYCLING_SPEED_AND_CADENCE 0x1816 /**< Cycling Speed and Cadence service UUID. */
+#define BLE_UUID_DEVICE_INFORMATION_SERVICE 0x180A /**< Device Information service UUID. */
+#define BLE_UUID_GLUCOSE_SERVICE 0x1808 /**< Glucose service UUID. */
+#define BLE_UUID_HEALTH_THERMOMETER_SERVICE 0x1809 /**< Health Thermometer service UUID. */
+#define BLE_UUID_HEART_RATE_SERVICE 0x180D /**< Heart Rate service UUID. */
+#define BLE_UUID_HUMAN_INTERFACE_DEVICE_SERVICE 0x1812 /**< Human Interface Device service UUID. */
+#define BLE_UUID_IMMEDIATE_ALERT_SERVICE 0x1802 /**< Immediate Alert service UUID. */
+#define BLE_UUID_LINK_LOSS_SERVICE 0x1803 /**< Link Loss service UUID. */
+#define BLE_UUID_NEXT_DST_CHANGE_SERVICE 0x1807 /**< Next Dst Change service UUID. */
+#define BLE_UUID_PHONE_ALERT_STATUS_SERVICE 0x180E /**< Phone Alert Status service UUID. */
+#define BLE_UUID_REFERENCE_TIME_UPDATE_SERVICE 0x1806 /**< Reference Time Update service UUID. */
+#define BLE_UUID_RUNNING_SPEED_AND_CADENCE 0x1814 /**< Running Speed and Cadence service UUID. */
+#define BLE_UUID_SCAN_PARAMETERS_SERVICE 0x1813 /**< Scan Parameters service UUID. */
+#define BLE_UUID_TX_POWER_SERVICE 0x1804 /**< TX Power service UUID. */
+/** @} */
+
+/** @defgroup UUID_CHARACTERISTICS Characteristic UUID definitions
+ * @{ */
+#define BLE_UUID_BATTERY_LEVEL_STATE_CHAR 0x2A1B /**< Battery Level State characteristic UUID. */
+#define BLE_UUID_BATTERY_POWER_STATE_CHAR 0x2A1A /**< Battery Power State characteristic UUID. */
+#define BLE_UUID_REMOVABLE_CHAR 0x2A3A /**< Removable characteristic UUID. */
+#define BLE_UUID_SERVICE_REQUIRED_CHAR 0x2A3B /**< Service Required characteristic UUID. */
+#define BLE_UUID_ALERT_CATEGORY_ID_CHAR 0x2A43 /**< Alert Category Id characteristic UUID. */
+#define BLE_UUID_ALERT_CATEGORY_ID_BIT_MASK_CHAR 0x2A42 /**< Alert Category Id Bit Mask characteristic UUID. */
+#define BLE_UUID_ALERT_LEVEL_CHAR 0x2A06 /**< Alert Level characteristic UUID. */
+#define BLE_UUID_ALERT_NOTIFICATION_CONTROL_POINT_CHAR 0x2A44 /**< Alert Notification Control Point characteristic UUID. */
+#define BLE_UUID_ALERT_STATUS_CHAR 0x2A3F /**< Alert Status characteristic UUID. */
+#define BLE_UUID_BATTERY_LEVEL_CHAR 0x2A19 /**< Battery Level characteristic UUID. */
+#define BLE_UUID_BLOOD_PRESSURE_FEATURE_CHAR 0x2A49 /**< Blood Pressure Feature characteristic UUID. */
+#define BLE_UUID_BLOOD_PRESSURE_MEASUREMENT_CHAR 0x2A35 /**< Blood Pressure Measurement characteristic UUID. */
+#define BLE_UUID_BODY_SENSOR_LOCATION_CHAR 0x2A38 /**< Body Sensor Location characteristic UUID. */
+#define BLE_UUID_BOOT_KEYBOARD_INPUT_REPORT_CHAR 0x2A22 /**< Boot Keyboard Input Report characteristic UUID. */
+#define BLE_UUID_BOOT_KEYBOARD_OUTPUT_REPORT_CHAR 0x2A32 /**< Boot Keyboard Output Report characteristic UUID. */
+#define BLE_UUID_BOOT_MOUSE_INPUT_REPORT_CHAR 0x2A33 /**< Boot Mouse Input Report characteristic UUID. */
+#define BLE_UUID_CURRENT_TIME_CHAR 0x2A2B /**< Current Time characteristic UUID. */
+#define BLE_UUID_DATE_TIME_CHAR 0x2A08 /**< Date Time characteristic UUID. */
+#define BLE_UUID_DAY_DATE_TIME_CHAR 0x2A0A /**< Day Date Time characteristic UUID. */
+#define BLE_UUID_DAY_OF_WEEK_CHAR 0x2A09 /**< Day Of Week characteristic UUID. */
+#define BLE_UUID_DST_OFFSET_CHAR 0x2A0D /**< Dst Offset characteristic UUID. */
+#define BLE_UUID_EXACT_TIME_256_CHAR 0x2A0C /**< Exact Time 256 characteristic UUID. */
+#define BLE_UUID_FIRMWARE_REVISION_STRING_CHAR 0x2A26 /**< Firmware Revision String characteristic UUID. */
+#define BLE_UUID_GLUCOSE_FEATURE_CHAR 0x2A51 /**< Glucose Feature characteristic UUID. */
+#define BLE_UUID_GLUCOSE_MEASUREMENT_CHAR 0x2A18 /**< Glucose Measurement characteristic UUID. */
+#define BLE_UUID_GLUCOSE_MEASUREMENT_CONTEXT_CHAR 0x2A34 /**< Glucose Measurement Context characteristic UUID. */
+#define BLE_UUID_HARDWARE_REVISION_STRING_CHAR 0x2A27 /**< Hardware Revision String characteristic UUID. */
+#define BLE_UUID_HEART_RATE_CONTROL_POINT_CHAR 0x2A39 /**< Heart Rate Control Point characteristic UUID. */
+#define BLE_UUID_HEART_RATE_MEASUREMENT_CHAR 0x2A37 /**< Heart Rate Measurement characteristic UUID. */
+#define BLE_UUID_HID_CONTROL_POINT_CHAR 0x2A4C /**< Hid Control Point characteristic UUID. */
+#define BLE_UUID_HID_INFORMATION_CHAR 0x2A4A /**< Hid Information characteristic UUID. */
+#define BLE_UUID_IEEE_REGULATORY_CERTIFICATION_DATA_LIST_CHAR 0x2A2A /**< IEEE Regulatory Certification Data List characteristic UUID. */
+#define BLE_UUID_INTERMEDIATE_CUFF_PRESSURE_CHAR 0x2A36 /**< Intermediate Cuff Pressure characteristic UUID. */
+#define BLE_UUID_INTERMEDIATE_TEMPERATURE_CHAR 0x2A1E /**< Intermediate Temperature characteristic UUID. */
+#define BLE_UUID_LOCAL_TIME_INFORMATION_CHAR 0x2A0F /**< Local Time Information characteristic UUID. */
+#define BLE_UUID_MANUFACTURER_NAME_STRING_CHAR 0x2A29 /**< Manufacturer Name String characteristic UUID. */
+#define BLE_UUID_MEASUREMENT_INTERVAL_CHAR 0x2A21 /**< Measurement Interval characteristic UUID. */
+#define BLE_UUID_MODEL_NUMBER_STRING_CHAR 0x2A24 /**< Model Number String characteristic UUID. */
+#define BLE_UUID_UNREAD_ALERT_CHAR 0x2A45 /**< Unread Alert characteristic UUID. */
+#define BLE_UUID_NEW_ALERT_CHAR 0x2A46 /**< New Alert characteristic UUID. */
+#define BLE_UUID_PNP_ID_CHAR 0x2A50 /**< PNP Id characteristic UUID. */
+#define BLE_UUID_PROTOCOL_MODE_CHAR 0x2A4E /**< Protocol Mode characteristic UUID. */
+#define BLE_UUID_RECORD_ACCESS_CONTROL_POINT_CHAR 0x2A52 /**< Record Access Control Point characteristic UUID. */
+#define BLE_UUID_REFERENCE_TIME_INFORMATION_CHAR 0x2A14 /**< Reference Time Information characteristic UUID. */
+#define BLE_UUID_REPORT_CHAR 0x2A4D /**< Report characteristic UUID. */
+#define BLE_UUID_REPORT_MAP_CHAR 0x2A4B /**< Report Map characteristic UUID. */
+#define BLE_UUID_RINGER_CONTROL_POINT_CHAR 0x2A40 /**< Ringer Control Point characteristic UUID. */
+#define BLE_UUID_RINGER_SETTING_CHAR 0x2A41 /**< Ringer Setting characteristic UUID. */
+#define BLE_UUID_SCAN_INTERVAL_WINDOW_CHAR 0x2A4F /**< Scan Interval Window characteristic UUID. */
+#define BLE_UUID_SCAN_REFRESH_CHAR 0x2A31 /**< Scan Refresh characteristic UUID. */
+#define BLE_UUID_SERIAL_NUMBER_STRING_CHAR 0x2A25 /**< Serial Number String characteristic UUID. */
+#define BLE_UUID_SOFTWARE_REVISION_STRING_CHAR 0x2A28 /**< Software Revision String characteristic UUID. */
+#define BLE_UUID_SUPPORTED_NEW_ALERT_CATEGORY_CHAR 0x2A47 /**< Supported New Alert Category characteristic UUID. */
+#define BLE_UUID_SUPPORTED_UNREAD_ALERT_CATEGORY_CHAR 0x2A48 /**< Supported Unread Alert Category characteristic UUID. */
+#define BLE_UUID_SYSTEM_ID_CHAR 0x2A23 /**< System Id characteristic UUID. */
+#define BLE_UUID_TEMPERATURE_MEASUREMENT_CHAR 0x2A1C /**< Temperature Measurement characteristic UUID. */
+#define BLE_UUID_TEMPERATURE_TYPE_CHAR 0x2A1D /**< Temperature Type characteristic UUID. */
+#define BLE_UUID_TIME_ACCURACY_CHAR 0x2A12 /**< Time Accuracy characteristic UUID. */
+#define BLE_UUID_TIME_SOURCE_CHAR 0x2A13 /**< Time Source characteristic UUID. */
+#define BLE_UUID_TIME_UPDATE_CONTROL_POINT_CHAR 0x2A16 /**< Time Update Control Point characteristic UUID. */
+#define BLE_UUID_TIME_UPDATE_STATE_CHAR 0x2A17 /**< Time Update State characteristic UUID. */
+#define BLE_UUID_TIME_WITH_DST_CHAR 0x2A11 /**< Time With Dst characteristic UUID. */
+#define BLE_UUID_TIME_ZONE_CHAR 0x2A0E /**< Time Zone characteristic UUID. */
+#define BLE_UUID_TX_POWER_LEVEL_CHAR 0x2A07 /**< TX Power Level characteristic UUID. */
+#define BLE_UUID_CSC_FEATURE_CHAR 0x2A5C /**< Cycling Speed and Cadence Feature characteristic UUID. */
+#define BLE_UUID_CSC_MEASUREMENT_CHAR 0x2A5B /**< Cycling Speed and Cadence Measurement characteristic UUID. */
+#define BLE_UUID_RSC_FEATURE_CHAR 0x2A54 /**< Running Speed and Cadence Feature characteristic UUID. */
+#define BLE_UUID_SC_CTRLPT_CHAR 0x2A55 /**< Speed and Cadence Control Point UUID. */
+#define BLE_UUID_RSC_MEASUREMENT_CHAR 0x2A53 /**< Running Speed and Cadence Measurement characteristic UUID. */
+#define BLE_UUID_SENSOR_LOCATION_CHAR 0x2A5D /**< Sensor Location characteristic UUID. */
+/** @} */
+
+/** @defgroup UUID_CHARACTERISTICS descriptors UUID definitions
+ * @{ */
+#define BLE_UUID_EXTERNAL_REPORT_REF_DESCR 0x2907 /**< External Report Reference descriptor UUID. */
+#define BLE_UUID_REPORT_REF_DESCR 0x2908 /**< Report Reference descriptor UUID. */
+/** @} */
+
+/** @defgroup ALERT_LEVEL_VALUES Definitions for the Alert Level characteristic values
+ * @{ */
+#define BLE_CHAR_ALERT_LEVEL_NO_ALERT 0x00 /**< No Alert. */
+#define BLE_CHAR_ALERT_LEVEL_MILD_ALERT 0x01 /**< Mild Alert. */
+#define BLE_CHAR_ALERT_LEVEL_HIGH_ALERT 0x02 /**< High Alert. */
+/** @} */
+
+#define BLE_SRV_ENCODED_REPORT_REF_LEN 2 /**< The length of an encoded Report Reference Descriptor. */
+#define BLE_CCCD_VALUE_LEN 2 /**< The length of a CCCD value. */
+
+/**@brief Type definition for error handler function which will be called in case of an error in
+ * a service or a service library module. */
+typedef void (*ble_srv_error_handler_t)(uint32_t nrf_error);
+
+/**@brief Value of a Report Reference descriptor.
+ *
+ * @details This is mapping information which maps the parent characteristic to the Report ID(s) and
+ * Report Type(s) defined within a Report Map characteristic.
+ */
+typedef struct
+{
+ uint8_t report_id; /**< Non-zero value if these is more than one instance of the same Report Type */
+ uint8_t report_type; /**< Type of Report characteristic (see @ref BLE_SRV_HIDS_REPORT_TYPE) */
+} ble_srv_report_ref_t;
+
+/**@brief UTF-8 string data type.
+ *
+ * @note The type can only hold a pointer to the string data (i.e. not the actual data).
+ */
+typedef struct
+{
+ uint16_t length; /**< String length. */
+ uint8_t * p_str; /**< String data. */
+} ble_srv_utf8_str_t;
+
+/**@brief Security settings structure.
+ * @details This structure contains the security options needed during initialization of the
+ * service.
+ */
+typedef struct
+{
+ ble_gap_conn_sec_mode_t read_perm; /**< Read permissions. */
+ ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */
+} ble_srv_security_mode_t;
+
+/**@brief Security settings structure.
+ * @details This structure contains the security options needed during initialization of the
+ * service. It can be used when the charecteristics contains cccd.
+ */
+typedef struct
+{
+ ble_gap_conn_sec_mode_t cccd_write_perm;
+ ble_gap_conn_sec_mode_t read_perm; /**< Read permissions. */
+ ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */
+} ble_srv_cccd_security_mode_t;
+
+/**@brief Function for decoding a CCCD value, and then testing if notification is
+ * enabled.
+ *
+ * @param[in] p_encoded_data Buffer where the encoded CCCD is stored.
+ *
+ * @return TRUE if notification is enabled, FALSE otherwise.
+ */
+static __INLINE bool ble_srv_is_notification_enabled(uint8_t * p_encoded_data)
+{
+ uint16_t cccd_value = uint16_decode(p_encoded_data);
+ return ((cccd_value & BLE_GATT_HVX_NOTIFICATION) != 0);
+}
+
+/**@brief Function for decoding a CCCD value, and then testing if indication is
+ * enabled.
+ *
+ * @param[in] p_encoded_data Buffer where the encoded CCCD is stored.
+ *
+ * @return TRUE if indication is enabled, FALSE otherwise.
+ */
+static __INLINE bool ble_srv_is_indication_enabled(uint8_t * p_encoded_data)
+{
+ uint16_t cccd_value = uint16_decode(p_encoded_data);
+ return ((cccd_value & BLE_GATT_HVX_INDICATION) != 0);
+}
+
+/**@brief Function for encoding a Report Reference Descriptor.
+ *
+ * @param[in] p_encoded_buffer The buffer of the encoded data.
+ * @param[in] p_report_ref Report Reference value to be encoded.
+ *
+ * @return Length of the encoded data.
+ */
+uint8_t ble_srv_report_ref_encode(uint8_t * p_encoded_buffer,
+ const ble_srv_report_ref_t * p_report_ref);
+
+/**@brief Function for making UTF-8 structure refer to an ASCII string.
+ *
+ * @param[out] p_utf8 UTF-8 structure to be set.
+ * @param[in] p_ascii ASCII string to be referred to.
+ */
+void ble_srv_ascii_to_utf8(ble_srv_utf8_str_t * p_utf8, char * p_ascii);
+
+#endif // BLE_SRV_COMMON_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_cmd_decoder.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_cmd_decoder.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,81 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_rpc_cmd_decoder Command Decoder
+ * @{
+ * @ingroup ble_sdk_lib_serialization
+ *
+ * @brief Decoder for serialized commands from Application Chip.
+ *
+ * @details This file contains declaration of common functions used for sending responses back to
+ * Application Chip after the command is processed, and function for processing commands
+ * received by the transport layer.
+ */
+
+#ifndef BLE_RPC_CMD_DECODER_H__
+#define BLE_RPC_CMD_DECODER_H__
+
+#include <stdint.h>
+
+#define RPC_DECODER_LENGTH_CHECK(LEN, INDEX, CMD) if ( INDEX > LEN) \
+ return ble_rpc_cmd_resp_send(CMD, NRF_ERROR_INVALID_LENGTH);
+
+/**@brief Function for sending a Command Response packet to the Application Chip through the transport
+ * layer.
+ *
+ * @param[in] op_code The op code of the command for which the Command Response is sent.
+ * @param[in] status The status field to be encoded into the Command Response.
+ *
+ * @retval NRF_SUCCESS On successful write of Command Response, otherwise an error code.
+ * If the transport layer returns an error code while sending
+ * the Command Response, the same error code will be returned by this
+ * function (see @ref hci_transport_pkt_write for the list of
+ * error codes).
+ */
+uint32_t ble_rpc_cmd_resp_send(uint8_t op_code, uint32_t status);
+
+/**@brief Function for sending a command response with additional data to the Application Chip through
+ * the transport layer.
+ *
+ * @param[in] op_code The op code of the command for which the Command Response is sent.
+ * @param[in] status The status field to be encoded into the Command Response.
+ * @param[in] p_data The data to be sent along with the status.
+ * @param[in] data_len The length of the additional data.
+ *
+ * @retval NRF_SUCCESS On successful write of Command Response, otherwise an error code.
+ * If the transport layer returns an error code while sending
+ * the Command Response, the same error code will be returned by this
+ * function (see @ref hci_transport_pkt_write for the list of
+ * error codes).
+ */
+uint32_t ble_rpc_cmd_resp_data_send(uint8_t op_code,
+ uint8_t status,
+ const uint8_t * const p_data,
+ uint16_t data_len);
+
+/**@brief Function for scheduling an RPC command event to be processed in main-thread.
+ *
+ * @details The function will read the arrived packet from the transport layer
+ * which is passed for decoding by the rpc_cmd_decoder module.
+ *
+ * @param[in] p_event_data Event data. This will be NULL as rpc_evt_schedule
+ * does not set any data.
+ * @param[in] event_size Event data size. This will be 0 as rpc_evt_schedule
+ * does not set any data.
+ */
+void ble_rpc_cmd_handle(void * p_event_data, uint16_t event_size);
+
+#endif // BLE_RPC_CMD_DECODER_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_cmd_decoder_gap.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_cmd_decoder_gap.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,53 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_rpc_cmd_decoder_gap GAP Command Decoder
+ * @{
+ * @ingroup ble_sdk_lib_serialization
+ *
+ * @brief Decoder for serialized GAP commands from Application Chip.
+ *
+ * @details This file contains the declaration of the function that decodes the serialized GAP
+ * commands from Application Chip and calls the appropriate BLE stack API.
+ */
+
+#ifndef BLE_RPC_CMD_DECODER_GAP_H__
+#define BLE_RPC_CMD_DECODER_GAP_H__
+
+#include <stdint.h>
+
+/**@brief Function for processing the encoded GAP command from Application Chip.
+ *
+ * @details This function will decode the encoded command and call the appropriate BLE Stack
+ * API. It will then create a Command Response packet with the return value from the
+ * stack API encoded in it and will send it to the transport layer for transmission to
+ * the application controller chip.
+
+ * @param[in] p_command The encoded command.
+ * @param[in] op_code Operation code of the command.
+ * @param[in] command_len Length of the encoded command.
+ *
+ * @retval NRF_SUCCESS If the decoding of the command was successful, the soft device API
+ * was called, and the command response was sent to peer, otherwise an
+ * error code.
+ * If the transport layer returns an error code while sending
+ * the Command Response, the same error code will be returned by this
+ * function (see @ref hci_transport_pkt_write for the list of
+ * error codes).
+ */
+uint32_t ble_rpc_cmd_gap_decode(uint8_t * p_command, uint8_t op_code, uint32_t command_len);
+
+#endif // BLE_RPC_CMD_DECODER_GAP_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_cmd_decoder_gatts.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_cmd_decoder_gatts.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,53 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_rpc_cmd_decoder_gatts GATTS Command Decoder
+ * @{
+ * @ingroup ble_sdk_lib_serialization
+ *
+ * @brief Decoder for serialized GATTS commands from Application Chip.
+ *
+ * @details This file contains the declaration of the function that decodes the serialized GATTS
+ * commands from Application Chip and calls the appropriate BLE stack API.
+ */
+
+#ifndef BLE_RPC_CMD_DECODER_GATTS_H__
+#define BLE_RPC_CMD_DECODER_GATTS_H__
+
+#include <stdint.h>
+
+/**@brief Function for processing the encoded GATTS command from application chip.
+ *
+ * @details This function will decode the encoded command and call the appropriate BLE Stack
+ * API. It will then create a Command Response packet with the return value from the
+ * stack API encoded in it and will send it to the transport layer for transmission to
+ * the application controller chip.
+
+ * @param[in] p_command The encoded command.
+ * @param[in] op_code Operation code of the command.
+ * @param[in] command_len Length of the encoded command.
+ *
+ * @retval NRF_SUCCESS If the decoding of the command was successful, the soft device API
+ * was called, and the command response was sent to peer, otherwise an
+ * error code.
+ * If the transport layer returns an error code while sending
+ * the Command Response, the same error code will be returned by this
+ * function (see @ref hci_transport_pkt_write for the list of
+ * error codes).
+ */
+uint32_t ble_rpc_cmd_gatts_decode(uint8_t * p_command, uint8_t op_code, uint32_t command_len);
+
+#endif // BLE_RPC_CMD_DECODER_GATTS_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_cmd_encoder.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_cmd_encoder.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,70 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_rpc_cmd_encoder Command Encoder
+ * @{
+ * @ingroup ble_sdk_lib_serialization
+ *
+ * @brief Encoder for serialized commands from Application Chip.
+ *
+ * @details This file contains the declaration of the functions that encode serialized commands
+ * from Application Chip.
+ */
+
+#ifndef BLE_RPC_CMD_ENCODER_H__
+#define BLE_RPC_CMD_ENCODER_H__
+
+#include <stdint.h>
+#include "ble_rpc_defines.h"
+
+/**@brief Command response type. */
+typedef struct
+{
+ uint8_t op_code; /**< Operation code for which this response applies. */
+ uint32_t err_code; /**< Error code received for this response applies. */
+} cmd_response_t;
+
+/**@brief Function for initializing the BLE S110 RPC Command Encoder module.
+ *
+ * @details This function uses the HCI Transport module, \ref hci_transport and executes
+ * \ref hci_transport_tx_done_register and \ref hci_transport_tx_alloc . All errors
+ * returned by those functions are passed on by this function.
+ *
+ * @retval NRF_SUCCESS Upon success
+ * @return Errors from \ref hci_transport and \ref hci_transport_tx_alloc .
+ */
+uint32_t ble_rpc_cmd_encoder_init(void);
+
+/**@brief Function for blocking in a loop, using WFE to allow low power mode, while awaiting a
+ * response from the connectivity chip.
+ *
+ * @param[in] op_code The Operation Code for which a response message is expected.
+ *
+ * @return The decoded error code received from the connectivity chip.
+ */
+uint32_t ble_rpc_cmd_resp_wait(uint8_t op_code);
+
+/**@brief Function for handling the command response packet.
+ *
+ * @details This function will be called when a command response is received in the transport
+ * layer. The response is decoded and returned to the waiting caller.
+ *
+ * @param[in] p_packet The packet from the transport layer.
+ * @param[in] packet_length The length of the packet.
+ */
+void ble_rpc_cmd_rsp_pkt_received(uint8_t * p_packet, uint16_t packet_length);
+
+#endif // BLE_RPC_CMD_ENCODER_H__
+
+/**@} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_defines.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_defines.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,55 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup rpc_cmd_defines Defines related to serialized BLE commands.
+ * @{
+ * @ingroup ble_sdk_lib
+ *
+ * @brief Defines for serialized BLE commands.
+ *
+ */
+
+#ifndef BLE_RPC_DEFINES_H__
+#define BLE_RPC_DEFINES_H__
+
+#define RPC_CMD_OP_CODE_POS 0 /**< Position of the Op Code in the command buffer.*/
+#define RPC_CMD_DATA_POS 1 /**< Position of the data in the command buffer.*/
+
+#define RPC_CMD_RESP_PKT_TYPE_POS 0 /**< Position of Packet type in the command response buffer.*/
+#define RPC_CMD_RESP_OP_CODE_POS 1 /**< Position of the Op Code in the command response buffer.*/
+#define RPC_CMD_RESP_STATUS_POS 2 /**< Position of the status field in the command response buffer.*/
+
+#define RPC_BLE_FIELD_LEN 1 /**< Optional field length size in bytes. */
+#define RPC_BLE_FIELD_PRESENT 0x01 /**< Value to indicate that an optional field is encoded in the serialized packet, e.g. white list. */
+#define RPC_BLE_FIELD_NOT_PRESENT 0x00 /**< Value to indicate that an optional field is not encoded in the serialized packet. */
+
+#define RPC_ERR_CODE_SIZE 4 /**< BLE API err_code size in bytes. */
+#define BLE_PKT_TYPE_SIZE 1 /**< Packet type (@ref ble_rpc_pkt_type_t) field size in bytes. */
+#define BLE_OP_CODE_SIZE 1 /**< Operation code field size in bytes. */
+
+#define RPC_BLE_CMD_RESP_PKT_MIN_SIZE 6 /**< Minimum length of a command response. */
+#define RPC_BLE_PKT_MAX_SIZE 596 /**< Maximum size for a BLE packet on the HCI Transport layer. This value is the hci_mem_pool buffer size minus the HCI Transport size. @note This value must be aligned with TX_BUF_SIZE in hci_mem_pool_internal.h. */
+
+/**@brief The types of packets. */
+typedef enum
+{
+ BLE_RPC_PKT_CMD, /**< Command packet type. */
+ BLE_RPC_PKT_RESP, /**< Command Response packet type. */
+ BLE_RPC_PKT_EVT, /**< Event packet type. */
+ BLE_RPC_PKT_TYPE_MAX /**< Upper bound. */
+} ble_rpc_pkt_type_t;
+
+#endif // BLE_RPC_DEFINES_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_event_decoder.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_event_decoder.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,50 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_rpc_evt_decoder Event Decoder
+ * @{
+ * @ingroup ble_sdk_lib_serialization
+ *
+ * @brief Decoder for serialized events from nRF51822.
+ *
+ * @details This file contains the declaration of the function that initializes the event decoder
+ * module and processes received events.
+ */
+
+#ifndef BLE_RPC_EVT_DECODER_H__
+#define BLE_RPC_EVT_DECODER_H__
+
+#include <stdint.h>
+
+#ifndef SVCALL_AS_NORMAL_FUNCTION
+#error "The compiler define SVCALL_AS_NORMAL_FUNCTION is not defined."
+#endif
+
+
+/**@brief Function for pushing an encoded packet in the event decoder.
+ *
+ * @warning This function is not reentrant safe and should always be called from the same interrupt
+ * context.
+ *
+ * @param[in] p_event_packet Pointer to the encoded event received.
+ * @param[in] event_packet_length Length of received packet.
+ *
+ * @retval NRF_SUCCESS Upon success.
+ * @retval NRF_ERROR_NO_MEM Upon receive queue full.
+ */
+uint32_t ble_rpc_event_pkt_received(uint8_t * p_event_packet, uint16_t event_packet_length);
+
+#endif // BLE_RPC_EVT_DECODER_H__
+
+/** @} **/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_event_decoder_gap.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_event_decoder_gap.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,49 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_rpc_evt_decoder_gap GAP Event Decoder
+ * @{
+ * @ingroup ble_sdk_lib_serialization
+ *
+ * @brief Decoder for serialized GAP events from nRF51822.
+ *
+ * @details This file contains declarations of functions used for decoding GAP event packets
+ * received from the Connectivity Chip.
+ *
+ */
+
+#ifndef BLE_RPC_EVENT_DECODER_GAP_H__
+#define BLE_RPC_EVENT_DECODER_GAP_H__
+
+#include <stdint.h>
+#include "ble.h"
+
+/** @brief Function for decoding the length of a BLE GAP event.
+ *
+ * @param[in] event_id Event Id for the event to length decode.
+ * @param[out] p_event_length The pointer for storing the decoded event length.
+ */
+void ble_rpc_gap_evt_length_decode(uint8_t event_id, uint16_t * p_event_length);
+
+/** @brief Function for decoding a BLE GAP event.
+ *
+ * @param[out] p_ble_evt The pointer for storing the decoded event.
+ * @param[in] p_packet The pointer to the encoded event.
+ */
+void ble_rpc_gap_evt_packet_decode(ble_evt_t * p_ble_evt,
+ uint8_t const * const p_packet);
+
+#endif // BLE_RPC_EVENT_DECODER_GAP_H__
+
+/** @} **/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_event_decoder_gatts.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_event_decoder_gatts.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,55 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_rpc_evt_decoder_gatts GATTS Event Decoder
+ * @{
+ * @ingroup ble_sdk_lib_serialization
+ *
+ * @brief Decoder for serialized GATT Server events from nRF51822.
+ *
+ * @details This file contains declarations of functions used for decoding GATTS event packets
+ * received from the Connectivity Chip.
+ *
+ */
+
+#ifndef BLE_RPC_EVENT_DECODER_GATTS_H__
+#define BLE_RPC_EVENT_DECODER_GATTS_H__
+
+#include <stdint.h>
+#include "ble.h"
+#include "ble_gatts.h"
+
+/** @brief Function for decoding the length of a BLE GATTS event. The decoded BLE GATTS event
+ * length will be returned in p_event_length.
+ *
+ * @param[in] event_id Event Id of the event, whose length is to be decoded.
+ * @param[out] p_event_length The pointer for storing the decoded event length.
+ * @param[in] p_packet The pointer to the encoded event.
+ */
+void ble_rpc_gatts_evt_length_decode(uint8_t event_id,
+ uint16_t * p_event_length,
+ uint8_t const * const p_packet);
+
+/** @brief Function for decoding a BLE GATTS event. The decoded BLE GATTS event will be returned in
+ * the memory pointed to by p_ble_evt.
+ *
+ * @param[out] p_ble_evt The pointer for storing the decoded event.
+ * @param[in] p_packet The pointer to the encoded event.
+ */
+void ble_rpc_gatts_evt_packet_decode(ble_evt_t * p_ble_evt,
+ uint8_t const * const p_packet);
+
+#endif // BLE_RPC_EVENT_DECODER_GATTS_H__
+
+/** @} **/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_event_encoder.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_event_encoder.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,38 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_rpc_event_encoder Events Encoder
+ * @{
+ * @ingroup ble_sdk_lib_serialization
+ *
+ * @brief Event encoder for S110 SoftDevice serialization.
+ *
+ * @details This module provides a function for serializing S110 SoftDevice events.
+ *
+ */
+#ifndef BLE_RPC_EVENT_ENCODER_H__
+#define BLE_RPC_EVENT_ENCODER_H__
+
+#include "ble.h"
+
+/**@brief Function for encoding a @ref ble_evt_t. The function will pass the serialized byte stream to the
+ * transport layer after encoding.
+ *
+ * @param[in] p_ble_evt S110 SoftDevice event to serialize.
+ */
+void ble_rpc_event_handle(ble_evt_t * p_ble_evt);
+
+#endif // BLE_RPC_EVENT_ENCODER_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_event_encoder_gap.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_event_encoder_gap.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,41 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_rpc_event_encoder_gap GAP Event Encoder
+ * @{
+ * @ingroup ble_sdk_lib_serialization
+ *
+ * @brief Event encoder for S110 SoftDevice serialization.
+ *
+ * @details This module provides functions for serializing S110 SoftDevice events.
+ *
+ */
+#ifndef BLE_RPC_EVENT_ENCODER_GAP_H__
+#define BLE_RPC_EVENT_ENCODER_GAP_H__
+
+#include <stdint.h>
+#include <ble.h>
+
+/**@brief Function for encoding a @ref ble_evt_t GAP event.
+ *
+ * @param[in] p_ble_evt S110 SoftDevice event to serialize.
+ * @param[out] p_buffer Pointer to a buffer for the encoded event.
+ *
+ * @return Number of bytes encoded.
+ */
+uint32_t ble_rpc_evt_gap_encode(ble_evt_t * p_ble_evt, uint8_t * p_buffer);
+
+#endif // BLE_RPC_EVENT_ENCODER_GAP_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_event_encoder_gatts.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_event_encoder_gatts.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,41 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup ble_rpc_event_encoder_gatts GATTS Events Encoder
+ * @{
+ * @ingroup ble_sdk_lib_serialization
+ *
+ * @brief Event encoder for S110 SoftDevice serialization.
+ *
+ * @details This module provides functions for serializing S110 SoftDevice events.
+ *
+ */
+#ifndef BLE_RPC_EVENT_ENCODER_GATTS_H__
+#define BLE_RPC_EVENT_ENCODER_GATTS_H__
+
+#include <stdint.h>
+#include <ble.h>
+
+/**@brief Function for encoding a @ref ble_evt_t GATTS event.
+ *
+ * @param[in] p_ble_evt S110 SoftDevice event to serialize.
+ * @param[out] p_buffer Pointer to a buffer for the encoded event.
+ *
+ * @return Number of bytes encoded.
+ */
+uint32_t ble_rpc_evt_gatts_encode(ble_evt_t * p_ble_evt, uint8_t * p_buffer);
+
+#endif // BLE_RPC_EVENT_ENCODER_GATTS_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_pkt_receiver.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/ble/rpc/ble_rpc_pkt_receiver.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,35 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup rpc_pkt_receiver Packet Receiver
+ * @{
+ * @ingroup ble_sdk_lib_serialization
+ *
+ * @brief This module is used for processing the Command Response packets and Event packets.
+ */
+
+#ifndef BLE_RPC_PKT_RECEIVER_H__
+#define BLE_RPC_PKT_RECEIVER_H__
+
+#include <stdint.h>
+
+/**@brief Function for initializing the BLE S110 RPC Packet Receiver module.
+ *
+ * @return NRF_SUCCESS upon success, any other upon failure.
+ */
+uint32_t ble_rpc_pkt_receiver_init(void);
+
+#endif
+
+/** @} **/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/nordic_common.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/nordic_common.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,73 @@ +/* Copyright (c) 2008 Nordic Semiconductor. All Rights Reserved. + * + * The information contained herein is property of Nordic Semiconductor ASA. + * Terms and conditions of usage are described in detail in NORDIC + * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT. + * + * Licensees are granted free, non-transferable use of the information. NO + * WARRANTY of ANY KIND is provided. This heading must NOT be removed from + * the file. + */ + +/** @file + * @brief Common defines and macros for firmware developed by Nordic Semiconductor. + */ + +#ifndef NORDIC_COMMON_H__ +#define NORDIC_COMMON_H__ + +#include "nordic_global.h" + +/** Swaps the upper byte with the lower byte in a 16 bit variable */ +//lint -emacro((572),SWAP) // Suppress warning 572 "Excessive shift value" +#define SWAP(x) ((((x)&0xFF)<<8)|(((x)>>8)&0xFF)) + +/** The upper 8 bits of a 16 bit value */ +#define MSB(a) (((a) & 0xFF00) >> 8) +/** The lower 8 bits (of a 16 bit value) */ +#define LSB(a) ((a) & 0xFF) + +/** Leaves the minimum of the two arguments */ +/*lint -emacro(506, MIN) */ /* Suppress "Constant value Boolean */ +#define MIN(a, b) ((a) < (b) ? (a) : (b)) +/** Leaves the maximum of the two arguments */ +/*lint -emacro(506, MAX) */ /* Suppress "Constant value Boolean */ +#define MAX(a, b) ((a) < (b) ? (b) : (a)) + +#define BIT_0 0x01 /**< The value of bit 0 */ +#define BIT_1 0x02 /**< The value of bit 1 */ +#define BIT_2 0x04 /**< The value of bit 2 */ +#define BIT_3 0x08 /**< The value of bit 3 */ +#define BIT_4 0x10 /**< The value of bit 4 */ +#define BIT_5 0x20 /**< The value of bit 5 */ +#define BIT_6 0x40 /**< The value of bit 6 */ +#define BIT_7 0x80 /**< The value of bit 7 */ +#define BIT_8 0x0100 /**< The value of bit 8 */ +#define BIT_9 0x0200 /**< The value of bit 9 */ +#define BIT_10 0x0400 /**< The value of bit 10 */ +#define BIT_11 0x0800 /**< The value of bit 11 */ +#define BIT_12 0x1000 /**< The value of bit 12 */ +#define BIT_13 0x2000 /**< The value of bit 13 */ +#define BIT_14 0x4000 /**< The value of bit 14 */ +#define BIT_15 0x8000 /**< The value of bit 15 */ +#define BIT_16 0x00010000 /**< The value of bit 16 */ +#define BIT_17 0x00020000 /**< The value of bit 17 */ +#define BIT_18 0x00040000 /**< The value of bit 18 */ +#define BIT_19 0x00080000 /**< The value of bit 19 */ +#define BIT_20 0x00100000 /**< The value of bit 20 */ +#define BIT_21 0x00200000 /**< The value of bit 21 */ +#define BIT_22 0x00400000 /**< The value of bit 22 */ +#define BIT_23 0x00800000 /**< The value of bit 23 */ +#define BIT_24 0x01000000 /**< The value of bit 24 */ +#define BIT_25 0x02000000 /**< The value of bit 25 */ +#define BIT_26 0x04000000 /**< The value of bit 26 */ +#define BIT_27 0x08000000 /**< The value of bit 27 */ +#define BIT_28 0x10000000 /**< The value of bit 28 */ +#define BIT_29 0x20000000 /**< The value of bit 29 */ +#define BIT_30 0x40000000 /**< The value of bit 30 */ +#define BIT_31 0x80000000 /**< The value of bit 31 */ + +#define UNUSED_VARIABLE(X) ((void)(X)) +#define UNUSED_PARAMETER(X) UNUSED_VARIABLE(X) + +#endif // NORDIC_COMMON_H__
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/nrf_assert.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/nrf_assert.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2006 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+
+/** @file
+ * @brief Utilities for verifying program logic
+ */
+
+#ifndef NRF_ASSERT_H_
+#define NRF_ASSERT_H_
+
+#include <stdint.h>
+#include "nordic_global.h"
+
+#if defined(DEBUG_NRF) || defined(DEBUG_NRF_USER)
+
+/** @brief Function for handling assertions.
+ *
+ *
+ * @note
+ * This function is called when an assertion has triggered.
+ *
+ *
+ * @post
+ * All hardware is put into an idle non-emitting state (in particular the radio is highly
+ * important to switch off since the radio might be in a state that makes it send
+ * packets continiously while a typical final infinit ASSERT loop is executing).
+ *
+ *
+ * @param line_num The line number where the assertion is called
+ * @param file_name Pointer to the file name
+ */
+void assert_nrf_callback(uint16_t line_num, const uint8_t *file_name);
+
+/*lint -emacro(506, ASSERT) */ /* Suppress "Constant value Boolean */
+/*lint -emacro(774, ASSERT) */ /* Suppress "Boolean within 'if' always evaluates to True" */ \
+
+/** @brief Function for checking intended for production code.
+ *
+ * Check passes if "expr" evaluates to true. */
+#define ASSERT(expr) \
+if (expr) \
+{ \
+} \
+else \
+{ \
+ assert_nrf_callback((uint16_t)__LINE__, (uint8_t *)__FILE__); \
+}
+#else
+#define ASSERT(expr) //!< Assert empty when disabled
+void assert_nrf_callback(uint16_t line_num, const uint8_t *file_name);
+#endif /* defined(DEBUG_NRF) || defined(DEBUG_NRF_USER) */
+
+#endif /* NRF_ASSERT_H_ */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/nrf_ecb.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/nrf_ecb.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,67 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic
+ * Semiconductor ASA.Terms and conditions of usage are described in detail
+ * in NORDIC SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ * $LastChangedRevision: 13999 $
+ */
+
+/**
+ * @file
+ * @brief ECB driver API.
+ */
+
+#ifndef NRF_ECB_H__
+#define NRF_ECB_H__
+
+/**
+ * @defgroup nrf_ecb AES ECB encryption
+ * @{
+ * @ingroup nrf_drivers
+ * @brief Driver for the nRF51 AES Electronic Code Book (ECB) peripheral.
+ *
+ * In order to encrypt and decrypt data the peripheral must be powered on
+ * using nrf_ecb_init() and then the key set using nrf_ecb_set_key.
+ */
+
+#include <stdint.h>
+#include "nordic_global.h"
+
+/**
+ * Initialize and power on the ECB peripheral.
+ *
+ * Allocates memory for the ECBDATAPTR.
+ * @retval true Initialization was successful.
+ * @retval false Powering up failed.
+ */
+bool nrf_ecb_init(void);
+
+/**
+ * Encrypt/decrypt 16-byte data using current key.
+ *
+ * The function avoids unnecessary copying of data if the point to the
+ * correct locations in the ECB data structure.
+ *
+ * @param dst Result of encryption/decryption. 16 bytes will be written.
+ * @param src Source with 16-byte data to be encrypted/decrypted.
+ *
+ * @retval true If the encryption operation completed.
+ * @retval false If the encryption operation did not complete.
+ */
+bool nrf_ecb_crypt(uint8_t * dst, const uint8_t * src);
+
+/**
+ * Set the key to be used for encryption/decryption.
+ *
+ * @param key Pointer to key. 16 bytes will be read.
+ */
+void nrf_ecb_set_key(const uint8_t * key);
+
+#endif // NRF_ECB_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/nrf_gpio.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/nrf_gpio.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,411 @@
+#ifndef NRF_GPIO_H__
+#define NRF_GPIO_H__
+
+#include "nordic_global.h"
+#include "nrf51.h"
+#include "nrf51_bitfields.h"
+
+/**
+ * @defgroup nrf_gpio GPIO abstraction
+ * @{
+ * @ingroup nrf_drivers
+ * @brief GPIO pin abstraction and port abstraction for reading and writing byte-wise to GPIO ports.
+ *
+ * Here, the GPIO ports are defined as follows:
+ * - Port 0 -> pin 0-7
+ * - Port 1 -> pin 8-15
+ * - Port 2 -> pin 16-23
+ * - Port 3 -> pin 24-31
+ */
+
+/**
+ * @enum nrf_gpio_port_dir_t
+ * @brief Enumerator used for setting the direction of a GPIO port.
+ */
+typedef enum
+{
+ NRF_GPIO_PORT_DIR_OUTPUT, ///< Output
+ NRF_GPIO_PORT_DIR_INPUT ///< Input
+} nrf_gpio_port_dir_t;
+
+/**
+ * @enum nrf_gpio_pin_dir_t
+ * Pin direction definitions.
+ */
+typedef enum
+{
+ NRF_GPIO_PIN_DIR_INPUT, ///< Input
+ NRF_GPIO_PIN_DIR_OUTPUT ///< Output
+} nrf_gpio_pin_dir_t;
+
+/**
+ * @enum nrf_gpio_port_select_t
+ * @brief Enumerator used for selecting between port 0 - 3.
+ */
+typedef enum
+{
+ NRF_GPIO_PORT_SELECT_PORT0 = 0, ///< Port 0 (GPIO pin 0-7)
+ NRF_GPIO_PORT_SELECT_PORT1, ///< Port 1 (GPIO pin 8-15)
+ NRF_GPIO_PORT_SELECT_PORT2, ///< Port 2 (GPIO pin 16-23)
+ NRF_GPIO_PORT_SELECT_PORT3, ///< Port 3 (GPIO pin 24-31)
+} nrf_gpio_port_select_t;
+
+/**
+ * @enum nrf_gpio_pin_pull_t
+ * @brief Enumerator used for selecting the pin to be pulled down or up at the time of pin configuration
+ */
+typedef enum
+{
+ NRF_GPIO_PIN_NOPULL = GPIO_PIN_CNF_PULL_Disabled, ///< Pin pullup resistor disabled
+ NRF_GPIO_PIN_PULLDOWN = GPIO_PIN_CNF_PULL_Pulldown, ///< Pin pulldown resistor enabled
+ NRF_GPIO_PIN_PULLUP = GPIO_PIN_CNF_PULL_Pullup, ///< Pin pullup resistor enabled
+} nrf_gpio_pin_pull_t;
+
+/**
+ * @enum nrf_gpio_pin_sense_t
+ * @brief Enumerator used for selecting the pin to sense high or low level on the pin input.
+ */
+typedef enum
+{
+ NRF_GPIO_PIN_NOSENSE = GPIO_PIN_CNF_SENSE_Disabled, ///< Pin sense level disabled.
+ NRF_GPIO_PIN_SENSE_LOW = GPIO_PIN_CNF_SENSE_Low, ///< Pin sense low level.
+ NRF_GPIO_PIN_SENSE_HIGH = GPIO_PIN_CNF_SENSE_High, ///< Pin sense high level.
+} nrf_gpio_pin_sense_t;
+
+/**
+ * @brief Function for configuring the GPIO pin range as outputs with normal drive strength.
+ * This function can be used to configure pin range as simple output with gate driving GPIO_PIN_CNF_DRIVE_S0S1 (normal cases).
+ *
+ * @param pin_range_start specifies the start number (inclusive) in the range of pin numbers to be configured (allowed values 0-30)
+ *
+ * @param pin_range_end specifies the end number (inclusive) in the range of pin numbers to be configured (allowed values 0-30)
+ *
+ * @note For configuring only one pin as output use @ref nrf_gpio_cfg_output
+ * Sense capability on the pin is disabled, and input is disconnected from the buffer as the pins are configured as output.
+ */
+static __INLINE void nrf_gpio_range_cfg_output(uint32_t pin_range_start, uint32_t pin_range_end)
+{
+ /*lint -e{845} // A zero has been given as right argument to operator '|'" */
+ for (; pin_range_start <= pin_range_end; pin_range_start++)
+ {
+ NRF_GPIO->PIN_CNF[pin_range_start] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
+ | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+ | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos)
+ | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
+ | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
+ }
+}
+
+/**
+ * @brief Function for configuring the GPIO pin range as inputs with given initial value set, hiding inner details.
+ * This function can be used to configure pin range as simple input.
+ *
+ * @param pin_range_start specifies the start number (inclusive) in the range of pin numbers to be configured (allowed values 0-30)
+ *
+ * @param pin_range_end specifies the end number (inclusive) in the range of pin numbers to be configured (allowed values 0-30)
+ *
+ * @param pull_config State of the pin range pull resistor (no pull, pulled down or pulled high)
+ *
+ * @note For configuring only one pin as input use @ref nrf_gpio_cfg_input
+ * Sense capability on the pin is disabled, and input is connected to buffer so that the GPIO->IN register is readable
+ */
+static __INLINE void nrf_gpio_range_cfg_input(uint32_t pin_range_start, uint32_t pin_range_end, nrf_gpio_pin_pull_t pull_config)
+{
+ /*lint -e{845} // A zero has been given as right argument to operator '|'" */
+ for (; pin_range_start <= pin_range_end; pin_range_start++)
+ {
+ NRF_GPIO->PIN_CNF[pin_range_start] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
+ | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+ | (pull_config << GPIO_PIN_CNF_PULL_Pos)
+ | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
+ | (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
+ }
+}
+
+/**
+ * @brief Function for configuring the given GPIO pin number as output with given initial value set, hiding inner details.
+ * This function can be used to configure pin range as simple input with gate driving GPIO_PIN_CNF_DRIVE_S0S1 (normal cases).
+ *
+ * @param pin_number specifies the pin number of gpio pin numbers to be configured (allowed values 0-30)
+ *
+ * @note Sense capability on the pin is disabled, and input is disconnected from the buffer as the pins are configured as output.
+ */
+static __INLINE void nrf_gpio_cfg_output(uint32_t pin_number)
+{
+ /*lint -e{845} // A zero has been given as right argument to operator '|'" */
+ NRF_GPIO->PIN_CNF[pin_number] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
+ | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+ | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos)
+ | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
+ | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
+}
+
+/**
+ * @brief Function for configuring the given GPIO pin number as input with given initial value set, hiding inner details.
+ * This function can be used to configure pin range as simple input with gate driving GPIO_PIN_CNF_DRIVE_S0S1 (normal cases).
+ *
+ * @param pin_number specifies the pin number of gpio pin numbers to be configured (allowed values 0-30)
+ *
+ * @param pull_config State of the pin range pull resistor (no pull, pulled down or pulled high)
+ *
+ * @note Sense capability on the pin is disabled, and input is connected to buffer so that the GPIO->IN register is readable
+ */
+static __INLINE void nrf_gpio_cfg_input(uint32_t pin_number, nrf_gpio_pin_pull_t pull_config)
+{
+ /*lint -e{845} // A zero has been given as right argument to operator '|'" */
+ NRF_GPIO->PIN_CNF[pin_number] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
+ | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+ | (pull_config << GPIO_PIN_CNF_PULL_Pos)
+ | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
+ | (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
+}
+
+/**
+ * @brief Function for configuring the given GPIO pin number as input with given initial value set, hiding inner details.
+ * This function can be used to configure pin range as simple input with gate driving GPIO_PIN_CNF_DRIVE_S0S1 (normal cases).
+ * Sense capability on the pin is configurable, and input is connected to buffer so that the GPIO->IN register is readable.
+ *
+ * @param pin_number specifies the pin number of gpio pin numbers to be configured (allowed values 0-30).
+ *
+ * @param pull_config state of the pin pull resistor (no pull, pulled down or pulled high).
+ *
+ * @param sense_config sense level of the pin (no sense, sense low or sense high).
+ */
+static __INLINE void nrf_gpio_cfg_sense_input(uint32_t pin_number, nrf_gpio_pin_pull_t pull_config, nrf_gpio_pin_sense_t sense_config)
+{
+ /*lint -e{845} // A zero has been given as right argument to operator '|'" */
+ NRF_GPIO->PIN_CNF[pin_number] = (sense_config << GPIO_PIN_CNF_SENSE_Pos)
+ | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+ | (pull_config << GPIO_PIN_CNF_PULL_Pos)
+ | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
+ | (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
+}
+
+/**
+ * @brief Function for setting the direction for a GPIO pin.
+ *
+ * @param pin_number specifies the pin number [0:31] for which to
+ * set the direction.
+ *
+ * @param direction specifies the direction
+ */
+static __INLINE void nrf_gpio_pin_dir_set(uint32_t pin_number, nrf_gpio_pin_dir_t direction)
+{
+ if(direction == NRF_GPIO_PIN_DIR_INPUT)
+ {
+ NRF_GPIO->PIN_CNF[pin_number] =
+ (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
+ | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+ | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos)
+ | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
+ | (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
+ }
+ else
+ {
+ NRF_GPIO->DIRSET = (1UL << pin_number);
+ }
+}
+
+/**
+ * @brief Function for setting a GPIO pin.
+ *
+ * Note that the pin must be configured as an output for this
+ * function to have any effect.
+ *
+ * @param pin_number specifies the pin number [0:31] to
+ * set.
+ */
+static __INLINE void nrf_gpio_pin_set(uint32_t pin_number)
+{
+ NRF_GPIO->OUTSET = (1UL << pin_number);
+}
+
+/**
+ * @brief Function for clearing a GPIO pin.
+ *
+ * Note that the pin must be configured as an output for this
+ * function to have any effect.
+ *
+ * @param pin_number specifies the pin number [0:31] to
+ * clear.
+ */
+static __INLINE void nrf_gpio_pin_clear(uint32_t pin_number)
+{
+ NRF_GPIO->OUTCLR = (1UL << pin_number);
+}
+
+/**
+ * @brief Function for toggling a GPIO pin.
+ *
+ * Note that the pin must be configured as an output for this
+ * function to have any effect.
+ *
+ * @param pin_number specifies the pin number [0:31] to
+ * toggle.
+ */
+static __INLINE void nrf_gpio_pin_toggle(uint32_t pin_number)
+{
+ NRF_GPIO->OUT ^= (1UL << pin_number);
+}
+
+/**
+ * @brief Function for writing a value to a GPIO pin.
+ *
+ * Note that the pin must be configured as an output for this
+ * function to have any effect.
+ *
+ * @param pin_number specifies the pin number [0:31] to
+ * write.
+ *
+ * @param value specifies the value to be written to the pin.
+ * @arg 0 clears the pin
+ * @arg >=1 sets the pin.
+ */
+static __INLINE void nrf_gpio_pin_write(uint32_t pin_number, uint32_t value)
+{
+ if (value == 0)
+ {
+ nrf_gpio_pin_clear(pin_number);
+ }
+ else
+ {
+ nrf_gpio_pin_set(pin_number);
+ }
+}
+
+/**
+ * @brief Function for reading the input level of a GPIO pin.
+ *
+ * Note that the pin must have input connected for the value
+ * returned from this function to be valid.
+ *
+ * @param pin_number specifies the pin number [0:31] to
+ * read.
+ *
+ * @return
+ * @retval 0 if the pin input level is low.
+ * @retval 1 if the pin input level is high.
+ * @retval > 1 should never occur.
+ */
+static __INLINE uint32_t nrf_gpio_pin_read(uint32_t pin_number)
+{
+ return ((NRF_GPIO->IN >> pin_number) & 1UL);
+}
+
+/**
+ * @brief Generic function for writing a single byte of a 32 bit word at a given
+ * address.
+ *
+ * This function should not be called from outside the nrf_gpio
+ * abstraction layer.
+ *
+ * @param word_address is the address of the word to be written.
+ *
+ * @param byte_no is the the word byte number (0-3) to be written.
+ *
+ * @param value is the value to be written to byte "byte_no" of word
+ * at address "word_address"
+ */
+static __INLINE void nrf_gpio_word_byte_write(volatile uint32_t * word_address, uint8_t byte_no, uint8_t value)
+{
+ *((volatile uint8_t*)(word_address) + byte_no) = value;
+}
+
+/**
+ * @brief Generic function for reading a single byte of a 32 bit word at a given
+ * address.
+ *
+ * This function should not be called from outside the nrf_gpio
+ * abstraction layer.
+ *
+ * @param word_address is the address of the word to be read.
+ *
+ * @param byte_no is the the byte number (0-3) of the word to be read.
+ *
+ * @return byte "byte_no" of word at address "word_address".
+ */
+static __INLINE uint8_t nrf_gpio_word_byte_read(const volatile uint32_t* word_address, uint8_t byte_no)
+{
+ return (*((const volatile uint8_t*)(word_address) + byte_no));
+}
+
+/**
+ * @brief Function for setting the direction of a port.
+ *
+ * @param port is the port for which to set the direction.
+ *
+ * @param dir direction to be set for this port.
+ */
+static __INLINE void nrf_gpio_port_dir_set(nrf_gpio_port_select_t port, nrf_gpio_port_dir_t dir)
+{
+ if (dir == NRF_GPIO_PORT_DIR_OUTPUT)
+ {
+ nrf_gpio_word_byte_write(&NRF_GPIO->DIRSET, port, 0xFF);
+ }
+ else
+ {
+ nrf_gpio_range_cfg_input(port*8, (port+1)*8-1, NRF_GPIO_PIN_NOPULL);
+ }
+}
+
+/**
+ * @brief Function for reading a GPIO port.
+ *
+ * @param port is the port to read.
+ *
+ * @return the input value on this port.
+ */
+static __INLINE uint8_t nrf_gpio_port_read(nrf_gpio_port_select_t port)
+{
+ return nrf_gpio_word_byte_read(&NRF_GPIO->IN, port);
+}
+
+/**
+ * @brief Function for writing to a GPIO port.
+ *
+ * @param port is the port to write.
+ *
+ * @param value is the value to write to this port.
+ *
+ * @sa nrf_gpio_port_dir_set()
+ */
+static __INLINE void nrf_gpio_port_write(nrf_gpio_port_select_t port, uint8_t value)
+{
+ nrf_gpio_word_byte_write(&NRF_GPIO->OUT, port, value);
+}
+
+/**
+ * @brief Function for setting individual pins on GPIO port.
+ *
+ * @param port is the port for which to set the pins.
+ *
+ * @param set_mask is a mask specifying which pins to set. A bit
+ * set to 1 indicates that the corresponding port pin shall be
+ * set.
+ *
+ * @sa nrf_gpio_port_dir_set()
+ */
+static __INLINE void nrf_gpio_port_set(nrf_gpio_port_select_t port, uint8_t set_mask)
+{
+ nrf_gpio_word_byte_write(&NRF_GPIO->OUTSET, port, set_mask);
+}
+
+/**
+ * @brief Function for clearing individual pins on GPIO port.
+ *
+ * @param port is the port for which to clear the pins.
+ *
+ * @param clr_mask is a mask specifying which pins to clear. A bit
+ * set to 1 indicates that the corresponding port pin shall be
+ * cleared.
+ *
+ * @sa nrf_gpio_port_dir_set()
+ */
+static __INLINE void nrf_gpio_port_clear(nrf_gpio_port_select_t port, uint8_t clr_mask)
+{
+ nrf_gpio_word_byte_write(&NRF_GPIO->OUTCLR, port, clr_mask);
+}
+
+/** @} */
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/nrf_nvmc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/nrf_nvmc.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,91 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic
+ * Semiconductor ASA.Terms and conditions of usage are described in detail
+ * in NORDIC SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ * $LastChangedRevision: 17685 $
+ */
+
+/**
+ * @file
+ * @brief NMVC driver API.
+ */
+
+#ifndef NRF_NVMC_H__
+#define NRF_NVMC_H__
+
+#include <stdint.h>
+#include "nordic_global.h"
+
+
+/**
+ * @defgroup nrf_nvmc Non-volatile memory controller
+ * @{
+ * @ingroup nrf_drivers
+ * @brief Driver for the nRF51 NVMC peripheral.
+ *
+ * This driver allows writing to the non-volatile memory (NVM) regions
+ * of the nRF51. In order to write to NVM the controller must be powered
+ * on and the relevant page must be erased.
+ *
+ */
+
+
+/**
+ * @brief Erase a page in flash. This is required before writing to any
+ * address in the page.
+ *
+ * @param address Start address of the page.
+ */
+void nrf_nvmc_page_erase(uint32_t address);
+
+
+/**
+ * @brief Write a single byte to flash.
+ *
+ * The function reads the word containing the byte, and then
+ * rewrites the entire word.
+ *
+ * @param address Address to write to.
+ * @param value Value to write.
+ */
+void nrf_nvmc_write_byte(uint32_t address , uint8_t value);
+
+
+/**
+ * @brief Write a 32-bit word to flash.
+ * @param address Address to write to.
+ * @param value Value to write.
+ */
+void nrf_nvmc_write_word(uint32_t address, uint32_t value);
+
+
+/**
+ * @brief Write consecutive bytes to flash.
+ *
+ * @param address Address to write to.
+ * @param src Pointer to data to copy from.
+ * @param num_bytes Number of bytes in src to write.
+ */
+void nrf_nvmc_write_bytes(uint32_t address, const uint8_t * src, uint32_t num_bytes);
+
+
+/**
+ @ @brief Write consecutive words to flash.
+ *
+ * @param address Address to write to.
+ * @param src Pointer to data to copy from.
+ * @param num_words Number of bytes in src to write.
+ */
+void nrf_nvmc_write_words(uint32_t address, const uint32_t * src, uint32_t num_words);
+
+
+#endif // NRF_NVMC_H__
+/** @} */
+
+
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/nrf_temp.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/nrf_temp.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,62 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+#ifndef NRF_TEMP_H__
+#define NRF_TEMP_H__
+
+#include "nordic_global.h"
+#include "nrf51.h"
+
+/**
+* @defgroup nrf_temperature TEMP (temperature) abstraction
+* @{
+* @ingroup nrf_drivers temperature_example
+* @brief Temperature module init and read functions.
+*
+*/
+
+
+
+/**
+ * @brief Function for preparing the temp module for temperature measurement.
+ *
+ * This function initializes the TEMP module and writes to the hidden configuration register.
+ *
+ * @param none
+ */
+static __INLINE void nrf_temp_init(void)
+{
+ /**@note Workaround for PAN_028 rev2.0A anomaly 31 - TEMP: Temperature offset value has to be manually loaded to the TEMP module */
+ *(uint32_t *) 0x4000C504 = 0;
+}
+
+
+
+#define MASK_SIGN (0x00000200UL)
+#define MASK_SIGN_EXTENSION (0xFFFFFC00UL)
+
+/**
+ * @brief Function for reading temperature measurement.
+ *
+ * The function reads the 10 bit 2's complement value and transforms it to a 32 bit 2's complement value.
+ *
+ * @param none
+ */
+static __INLINE int32_t nrf_temp_read(void)
+{
+ /**@note Workaround for PAN_028 rev2.0A anomaly 28 - TEMP: Negative measured values are not represented correctly */
+ return ((NRF_TEMP->TEMP & MASK_SIGN) != 0) ? (NRF_TEMP->TEMP | MASK_SIGN_EXTENSION) : (NRF_TEMP->TEMP);
+}
+
+/** @} */
+
+#endif
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,303 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_COMMON BLE SoftDevice Common
+ @{
+ @defgroup ble_api Events, type definitions and API calls
+ @{
+
+ @brief Module independent events, type definitions and API calls for the S110 SoftDevice.
+
+ */
+
+#ifndef BLE_H__
+#define BLE_H__
+
+#include "nordic_global.h"
+#include "ble_ranges.h"
+#include "ble_types.h"
+#include "ble_gap.h"
+#include "ble_l2cap.h"
+#include "ble_gatt.h"
+#include "ble_gattc.h"
+#include "ble_gatts.h"
+
+/**
+ * @brief Common API SVC numbers.
+ */
+enum BLE_COMMON_SVCS
+{
+ SD_BLE_EVT_GET = BLE_SVC_BASE, /**< Get an event from the pending events queue. */
+ SD_BLE_TX_BUFFER_COUNT_GET, /**< Get the total number of available application transmission buffers from the stack. */
+ SD_BLE_UUID_VS_ADD, /**< Add a Vendor Specific UUID. */
+ SD_BLE_UUID_DECODE, /**< Decode UUID bytes. */
+ SD_BLE_UUID_ENCODE, /**< Encode UUID bytes. */
+ SD_BLE_VERSION_GET, /**< Get the local version information (company id, LMP Version, LMP Subversion). */
+ SD_BLE_USER_MEM_REPLY, /**< User Memory Reply. */
+};
+
+/** @brief Required pointer alignment for BLE Events.
+*/
+#define BLE_EVTS_PTR_ALIGNMENT 4
+
+/** @defgroup BLE_USER_MEM_TYPES User Memory Types
+ * @{ */
+#define BLE_USER_MEM_TYPE_INVALID 0x00 /**< Invalid User Memory Types. */
+#define BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES 0x01 /**< User Memory for GATTS queued writes. */
+/** @} */
+
+/** @brief Maximum number of Vendor Specific UUIDs.
+*/
+#define BLE_UUID_VS_MAX_COUNT 10
+
+/**
+ * @brief BLE Module Independent Event IDs.
+ */
+enum BLE_COMMON_EVTS
+{
+ BLE_EVT_TX_COMPLETE = BLE_EVT_BASE, /**< Transmission Complete. */
+ BLE_EVT_USER_MEM_REQUEST, /**< User Memory request. */
+ BLE_EVT_USER_MEM_RELEASE /**< User Memory release. */
+};
+
+/**@brief User Memory Block. */
+typedef struct
+{
+ uint8_t* p_mem; /**< Pointer to the start of the user memory block. */
+ uint16_t len; /**< Length in bytes of the user memory block. */
+} ble_user_mem_block_t;
+
+/**
+ * @brief TX complete event.
+ */
+typedef struct
+{
+ uint8_t count; /**< Number of packets transmitted. */
+} ble_evt_tx_complete_t;
+
+/**@brief Event structure for BLE_EVT_USER_MEM_REQUEST. */
+typedef struct
+{
+ uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */
+} ble_evt_user_mem_request_t;
+
+/**@brief Event structure for BLE_EVT_USER_MEM_RELEASE. */
+typedef struct
+{
+ uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */
+ ble_user_mem_block_t mem_block; /**< User memory block */
+} ble_evt_user_mem_release_t;
+
+
+/**@brief Event structure for events not associated with a specific function module. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which this event occured. */
+ union
+ {
+ ble_evt_tx_complete_t tx_complete; /**< Transmission Complete. */
+ ble_evt_user_mem_request_t user_mem_request; /**< User Memory Request Event Parameters. */
+ ble_evt_user_mem_release_t user_mem_release; /**< User Memory Release Event Parameters. */
+ } params;
+} ble_common_evt_t;
+
+/**@brief BLE Event header. */
+typedef struct
+{
+ uint16_t evt_id; /**< Value from a BLE_<module>_EVT series. */
+ uint16_t evt_len; /**< Length in octets excluding this header. */
+} ble_evt_hdr_t;
+
+/**@brief Common BLE Event type, wrapping the module specific event reports. */
+typedef struct
+{
+ ble_evt_hdr_t header; /**< Event header. */
+ union
+ {
+ ble_common_evt_t common_evt; /**< Common Event, evt_id in BLE_EVT_* series. */
+ ble_gap_evt_t gap_evt; /**< GAP originated event, evt_id in BLE_GAP_EVT_* series. */
+ ble_l2cap_evt_t l2cap_evt; /**< L2CAP originated event, evt_id in BLE_L2CAP_EVT* series. */
+ ble_gattc_evt_t gattc_evt; /**< GATT client originated event, evt_id in BLE_GATTC_EVT* series. */
+ ble_gatts_evt_t gatts_evt; /**< GATT server originated event, evt_id in BLE_GATTS_EVT* series. */
+ } evt;
+} ble_evt_t;
+
+
+/**
+ * @brief Version Information.
+ */
+typedef struct
+{
+ uint8_t version_number; /**< LMP Version number for BT 4.0 spec is 6 (https://www.bluetooth.org/technical/assignednumbers/link_layer.htm). */
+ uint16_t company_id; /**< Company ID, Nordic Semiconductor's company ID is 89 (0x0059) (https://www.bluetooth.org/apps/content/Default.aspx?doc_id=49708). */
+ uint16_t subversion_number; /**< LMP Sub Version number corresponds to the SoftDevice Config ID. */
+} ble_version_t;
+
+
+/**@brief Get an event from the pending events queue.
+ *
+ * @param[in] p_dest Pointer to buffer to be filled in with an event, or NULL to retrieve the event length. This buffer <b>must be 4-byte aligned in memory</b>.
+ * @param[in, out] p_len Pointer the length of the buffer, on return it is filled with the event length.
+ *
+ * @details This call allows the application to pull a BLE event from the BLE stack. The application is signalled that an event is
+ * available from the BLE Stack by the triggering of the SD_EVT_IRQn interrupt (mapped to IRQ 22).
+ * The application is free to choose whether to call this function from thread mode (main context) or directly from the Interrupt Service Routine
+ * that maps to SD_EVT_IRQn. In any case however, and because the BLE stack runs at a higher priority than the application, this function should be called
+ * in a loop (until @ref NRF_ERROR_NOT_FOUND is returned) every time SD_EVT_IRQn is raised to ensure that all available events are pulled from the stack.
+ * Failure to do so could potentially leave events in the internal queue without the application being aware of this fact.
+ * Sizing the p_dest buffer is equally important, since the application needs to provide all the memory necessary for the event to be copied into
+ * application memory. If the buffer provided is not large enough to fit the entire contents of the event, @ref NRF_ERROR_DATA_SIZE will be returned
+ * and the application can then call again with a larger buffer size.
+ * Please note that because of the variable length nature of some events, sizeof(ble_evt_t) will not always be large enough to fit certain events,
+ * and so it is the application's responsability to provide an amount of memory large enough so that the relevant event is copied in full.
+ * The application may "peek" the event length by providing p_dest as a NULL pointer and inspecting the value of *p_len upon return.
+ *
+ * @note The pointer supplied must be aligned to the extend defined by @ref BLE_EVTS_PTR_ALIGNMENT
+ *
+ * @return @ref NRF_SUCCESS Event pulled and stored into the supplied buffer.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied.
+ * @return @ref NRF_ERROR_NOT_FOUND No events ready to be pulled.
+ * @return @ref NRF_ERROR_DATA_SIZE Event ready but could not fit into the supplied buffer.
+ */
+SVCALL(SD_BLE_EVT_GET, uint32_t, sd_ble_evt_get(uint8_t* p_dest, uint16_t *p_len));
+
+
+/**@brief Get the total number of available application transmission buffers in the BLE stack.
+ *
+ * @details This call allows the application to obtain the total number of
+ * transmission buffers available for application data. Please note that
+ * this does not give the number of free buffers, but rather the total amount of them.
+ * The application has two options to handle its own application transmission buffers:
+ * - Use a simple arithmetic calculation: at boot time the application should use this function
+ * to find out the total amount of buffers available to it and store it in a variable.
+ * Every time a packet that consumes an application buffer is sent using any of the
+ * exposed functions in this BLE API, the application should decrement that variable.
+ * Conversely, whenever a @ref BLE_EVT_TX_COMPLETE event is received by the application
+ * it should retrieve the count field in such event and add that number to the same
+ * variable storing the number of available packets.
+ * This mechanism allows the application to be aware at any time of the number of
+ * application packets available in the BLE stack's internal buffers, and therefore
+ * it can know with certainty whether it is possible to send more data or it has to
+ * wait for a @ref BLE_EVT_TX_COMPLETE event before it proceeds.
+ * - Choose to simply not keep track of available buffers at all, and instead handle the
+ * @ref BLE_ERROR_NO_TX_BUFFERS error by queueing the packet to be transmitted and
+ * try again as soon as a @ref BLE_EVT_TX_COMPLETE event arrives.
+ *
+ * The API functions that <b>may</b> consume an application buffer depending on
+ * the parameters supplied to them can be found below:
+ *
+ * - @ref sd_ble_gattc_write (write witout response only)
+ * - @ref sd_ble_gatts_hvx (notifications only)
+ * - @ref sd_ble_l2cap_tx (all packets)
+ *
+ * @param[out] p_count Pointer to a uint8_t which will contain the number of application transmission buffers upon
+ * successful return.
+ *
+ * @return @ref NRF_SUCCESS Number of application transmission buffers retrieved successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ */
+SVCALL(SD_BLE_TX_BUFFER_COUNT_GET, uint32_t, sd_ble_tx_buffer_count_get(uint8_t* p_count));
+
+
+/**@brief Add a Vendor Specific UUID.
+ *
+ * @details This call enables the application to add a vendor specific UUID to the BLE stack's table,
+ * for later use all other modules and APIs. This then allows the application to use the shorter,
+ * 24-bit @ref ble_uuid_t format when dealing with both 16-bit and 128-bit UUIDs without having to
+ * check for lengths and having split code paths. The way that this is accomplished is by extending the
+ * grouping mechanism that the Bluetooth SIG standard base UUID uses for all other 128-bit UUIDs. The
+ * type field in the @ref ble_uuid_t structure is an index (relative to @ref BLE_UUID_TYPE_VENDOR_BEGIN)
+ * to the table populated by multiple calls to this function, and the uuid field in the same structure
+ * contains the 2 bytes at indices 12 and 13. The number of possible 128-bit UUIDs available to the
+ * application is therefore the number of Vendor Specific UUIDs added with the help of this function times 65536,
+ * although restricted to modifying bytes 12 and 13 for each of the entries in the supplied array.
+ *
+ * @note Bytes 12 and 13 of the provided UUID will not be used internally, since those are always replaced by
+ * the 16-bit uuid field in @ref ble_uuid_t.
+ *
+ *
+ * @param[in] p_vs_uuid Pointer to a 16-octet (128-bit) little endian Vendor Specific UUID disregarding
+ * bytes 12 and 13.
+ * @param[out] p_uuid_type Pointer where the type field in @ref ble_uuid_t corresponding to this UUID will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully added the Vendor Specific UUID.
+ * @return @ref NRF_ERROR_INVALID_ADDR If p_vs_uuid or p_uuid_type is NULL or invalid.
+ * @return @ref NRF_ERROR_NO_MEM If there are no more free slots for VS UUIDs.
+ * @return @ref NRF_ERROR_FORBIDDEN If p_vs_uuid has already been added to the VS UUID table.
+ */
+SVCALL(SD_BLE_UUID_VS_ADD, uint32_t, sd_ble_uuid_vs_add(ble_uuid128_t const * const p_vs_uuid, uint8_t * const p_uuid_type));
+
+
+/** @brief Decode little endian raw UUID bytes (16-bit or 128-bit) into a 24 bit @ref ble_uuid_t structure.
+ *
+ * @details The raw UUID bytes excluding bytes 12 and 13 (i.e. bytes 0-11 and 14-15) of p_uuid_le are compared
+ * to the corresponding ones in each entry of the table of vendor specific UUIDs pouplated with @ref sd_ble_uuid_vs_add
+ * to look for a match. If there is such a match, bytes 12 and 13 are returned as p_uuid->uuid and the index
+ * relative to @ref BLE_UUID_TYPE_VENDOR_BEGIN as p_uuid->type.
+ *
+ * @note If the UUID length supplied is 2, then the type set by this call will always be @ref BLE_UUID_TYPE_BLE.
+ *
+ * @param[in] uuid_le_len Length in bytes of the buffer pointed to by p_uuid_le (must be 2 or 16 bytes).
+ * @param[in] p_uuid_le Pointer pointing to little endian raw UUID bytes.
+ * @param[in,out] p_uuid Pointer to a @ref ble_uuid_t structure to be filled in.
+ *
+ * @return @ref NRF_SUCCESS Successfully decoded into the @ref ble_uuid_t structure.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_LENGTH Invalid UUID length.
+ * @return @ref NRF_ERROR_NOT_FOUND For a 128-bit UUID, no match in the populated table of UUIDs.
+ */
+SVCALL(SD_BLE_UUID_DECODE, uint32_t, sd_ble_uuid_decode(uint8_t uuid_le_len, uint8_t const * const p_uuid_le, ble_uuid_t * const p_uuid));
+
+
+/** @brief Encode a @ref ble_uuid_t structure into little endian raw UUID bytes (16-bit or 128-bit).
+ *
+ * @note The pointer to the destination buffer p_uuid_le may be NULL, in which case only the validitiy and size of p_uuid is computed.
+ *
+ * @param[in] p_uuid Pointer to a @ref ble_uuid_t structure that will be encoded into bytes.
+ * @param[out] p_uuid_le_len Pointer to a uint8_t that will be filled with the encoded length (2 or 16 bytes).
+ * @param[out] p_uuid_le Pointer to a buffer where the little endian raw UUID bytes (2 or 16) will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully encoded into the buffer.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid UUID type.
+ */
+SVCALL(SD_BLE_UUID_ENCODE, uint32_t, sd_ble_uuid_encode(ble_uuid_t const * const p_uuid, uint8_t * const p_uuid_le_len, uint8_t * const p_uuid_le));
+
+
+/**@brief Get Version Information.
+ *
+ * @details This call allows the application to get the BLE stack version information.
+ *
+ * @param[in] p_version Pointer to ble_version_t structure to be filled in.
+ *
+ * @return @ref NRF_SUCCESS Version information stored successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY The stack is busy (typically doing a locally-initiated disconnection procedure).
+ */
+SVCALL(SD_BLE_VERSION_GET, uint32_t, sd_ble_version_get(ble_version_t * p_version));
+
+
+/**@brief Provide a user memory block.
+ *
+ * @note This call can only be used as a response to a @ref BLE_EVT_USER_MEM_REQUEST event issued to the application.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_block Pointer to a user memory block structure.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued a response to the peer.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_STATE No execute write request pending.
+ */
+SVCALL(SD_BLE_USER_MEM_REPLY, uint32_t, sd_ble_user_mem_reply(uint16_t conn_handle, ble_user_mem_block_t *p_block));
+
+#endif /* BLE_H__ */
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_err.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_err.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @addtogroup BLE_COMMON
+ @{
+ @addtogroup nrf_error
+ @{
+ @ingroup BLE_COMMON
+ @}
+
+ @defgroup ble_err General error codes
+ @{
+
+ @brief General error code definitions for the BLE API.
+
+ @ingroup BLE_COMMON
+*/
+#ifndef NRF_BLE_ERR_H__
+#define NRF_BLE_ERR_H__
+
+#include "nordic_global.h"
+#include "nrf_error.h"
+
+/* @defgroup BLE_ERRORS Error Codes
+ * @{ */
+#define BLE_ERROR_INVALID_CONN_HANDLE (NRF_ERROR_STK_BASE_NUM+0x001) /**< Invalid connection handle. */
+#define BLE_ERROR_INVALID_ATTR_HANDLE (NRF_ERROR_STK_BASE_NUM+0x002) /**< Invalid attribute handle. */
+#define BLE_ERROR_NO_TX_BUFFERS (NRF_ERROR_STK_BASE_NUM+0x003) /**< Buffer capacity exceeded. */
+/** @} */
+
+
+/** @defgroup BLE_ERROR_SUBRANGES Module specific error code subranges
+ * @brief Assignment of subranges for module specific error codes.
+ * @note For specific error codes, see ble_<module>.h or ble_error_<module>.h.
+ * @{ */
+#define NRF_L2CAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x100) /**< L2CAP specific errors. */
+#define NRF_GAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x200) /**< GAP specific errors. */
+#define NRF_GATTC_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x300) /**< GATT client specific errors. */
+#define NRF_GATTS_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x400) /**< GATT server specific errors. */
+/** @} */
+
+#endif
+
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_gap.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_gap.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,896 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_GAP Generic Access Profile (GAP)
+ @{
+ @brief Definitions and prototypes for the GAP interface.
+ */
+
+#ifndef BLE_GAP_H__
+#define BLE_GAP_H__
+
+#include "nordic_global.h"
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "nrf_svc.h"
+
+/**
+ * @brief GAP API SVC numbers.
+ */
+enum BLE_GAP_SVCS
+{
+ SD_BLE_GAP_ADDRESS_SET = BLE_GAP_SVC_BASE, /**< Set own Bluetooth Address. */
+ SD_BLE_GAP_ADDRESS_GET, /**< Get own Bluetooth Address. */
+ SD_BLE_GAP_ADV_DATA_SET, /**< Set Advertisement Data. */
+ SD_BLE_GAP_ADV_START, /**< Start Advertising. */
+ SD_BLE_GAP_ADV_STOP, /**< Stop Advertising. */
+ SD_BLE_GAP_CONN_PARAM_UPDATE, /**< Connection Parameter Update. */
+ SD_BLE_GAP_DISCONNECT, /**< Disconnect. */
+ SD_BLE_GAP_TX_POWER_SET, /**< Set TX Power. */
+ SD_BLE_GAP_APPEARANCE_SET, /**< Set Appearance. */
+ SD_BLE_GAP_APPEARANCE_GET, /**< Get Appearance. */
+ SD_BLE_GAP_PPCP_SET, /**< Set PPCP. */
+ SD_BLE_GAP_PPCP_GET, /**< Get PPCP. */
+ SD_BLE_GAP_DEVICE_NAME_SET, /**< Set Device Name. */
+ SD_BLE_GAP_DEVICE_NAME_GET, /**< Get Device Name. */
+ SD_BLE_GAP_AUTHENTICATE, /**< Initiate Pairing/Bonding. */
+ SD_BLE_GAP_SEC_PARAMS_REPLY, /**< Reply with Security Parameters. */
+ SD_BLE_GAP_AUTH_KEY_REPLY, /**< Reply with an authentication key. */
+ SD_BLE_GAP_SEC_INFO_REPLY, /**< Reply with Security Information. */
+ SD_BLE_GAP_CONN_SEC_GET, /**< Obtain connection security level. */
+ SD_BLE_GAP_RSSI_START, /**< Start reporting of changes in RSSI. */
+ SD_BLE_GAP_RSSI_STOP, /**< Stop reporting of changes in RSSI. */
+};
+
+
+/** @addtogroup BLE_GAP_DEFINES Defines
+ * @{ */
+
+/** @defgroup BLE_ERRORS_GAP SVC return values specific to GAP
+ * @{ */
+#define BLE_ERROR_GAP_UUID_LIST_MISMATCH (NRF_GAP_ERR_BASE + 0x000) /**< UUID list does not contain an integral number of UUIDs. */
+#define BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST (NRF_GAP_ERR_BASE + 0x001) /**< Use of Whitelist not permitted with discoverable advertising. */
+#define BLE_ERROR_GAP_INVALID_BLE_ADDR (NRF_GAP_ERR_BASE + 0x002) /**< The upper two bits of the address do not correspond to the specified address type. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_ROLES GAP Roles
+ * @note Not explicitly used in peripheral API, but will be relevant for central API.
+ * @{ */
+#define BLE_GAP_ROLE_INVALID 0x0 /**< Invalid Role. */
+#define BLE_GAP_ROLE_PERIPH 0x1 /**< Peripheral Role. */
+#define BLE_GAP_ROLE_CENTRAL 0x2 /**< Central Role. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_TIMEOUT_SOURCES GAP Timeout sources
+ * @{ */
+#define BLE_GAP_TIMEOUT_SRC_ADVERTISEMENT 0x00 /**< Advertisement timeout. */
+#define BLE_GAP_TIMEOUT_SRC_SECURITY_REQUEST 0x01 /**< Security request timeout. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_ADDR_TYPES GAP Address types
+ * @{ */
+#define BLE_GAP_ADDR_TYPE_PUBLIC 0x00 /**< Public address. */
+#define BLE_GAP_ADDR_TYPE_RANDOM_STATIC 0x01 /**< Random Static address. */
+#define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE 0x02 /**< Private Resolvable address. */
+#define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE 0x03 /**< Private Non-Resolvable address. */
+/** @} */
+
+
+/** @brief BLE address length. */
+#define BLE_GAP_ADDR_LEN 6
+
+
+/** @defgroup BLE_GAP_AD_TYPE_DEFINITIONS GAP Advertising and Scan Response Data format
+ * @note Found at https://www.bluetooth.org/Technical/AssignedNumbers/generic_access_profile.htm
+ * @{ */
+#define BLE_GAP_AD_TYPE_FLAGS 0x01 /**< Flags for discoverability. */
+#define BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_MORE_AVAILABLE 0x02 /**< Partial list of 16 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_COMPLETE 0x03 /**< Complete list of 16 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_MORE_AVAILABLE 0x04 /**< Partial list of 32 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_COMPLETE 0x05 /**< Complete list of 32 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_MORE_AVAILABLE 0x06 /**< Partial list of 128 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_COMPLETE 0x07 /**< Complete list of 128 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_SHORT_LOCAL_NAME 0x08 /**< Short local device name. */
+#define BLE_GAP_AD_TYPE_COMPLETE_LOCAL_NAME 0x09 /**< Complete local device name. */
+#define BLE_GAP_AD_TYPE_TX_POWER_LEVEL 0x0A /**< Transmit power level. */
+#define BLE_GAP_AD_TYPE_CLASS_OF_DEVICE 0x0D /**< Class of device. */
+#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_HASH_C 0x0E /**< Simple Pairing Hash C. */
+#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_RANDOMIZER_R 0x0F /**< Simple Pairing Randomizer R. */
+#define BLE_GAP_AD_TYPE_SECURITY_MANAGER_TK_VALUE 0x10 /**< Security Manager TK Value. */
+#define BLE_GAP_AD_TYPE_SECURITY_MANAGER_OOB_FLAGS 0x11 /**< Security Manager Out Of Band Flags. */
+#define BLE_GAP_AD_TYPE_SLAVE_CONNECTION_INTERVAL_RANGE 0x12 /**< Slave Connection Interval Range. */
+#define BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_16BIT 0x14 /**< List of 16-bit Service Solicitation UUIDs. */
+#define BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_128BIT 0x15 /**< List of 128-bit Service Solicitation UUIDs. */
+#define BLE_GAP_AD_TYPE_SERVICE_DATA 0x16 /**< Service Data. */
+#define BLE_GAP_AD_TYPE_PUBLIC_TARGET_ADDRESS 0x17 /**< Public Target Address. */
+#define BLE_GAP_AD_TYPE_RANDOM_TARGET_ADDRESS 0x18 /**< Random Target Address. */
+#define BLE_GAP_AD_TYPE_APPEARANCE 0x19 /**< Appearance. */
+#define BLE_GAP_AD_TYPE_MANUFACTURER_SPECIFIC_DATA 0xFF /**< Manufacturer Specific Data. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_ADV_FLAGS GAP Advertisement Flags
+ * @{ */
+#define BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE (0x01) /**< LE Limited Discoverable Mode. */
+#define BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE (0x02) /**< LE General Discoverable Mode. */
+#define BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED (0x04) /**< BR/EDR not supported. */
+#define BLE_GAP_ADV_FLAG_LE_BR_EDR_CONTROLLER (0x08) /**< Simultaneous LE and BR/EDR, Controller. */
+#define BLE_GAP_ADV_FLAG_LE_BR_EDR_HOST (0x10) /**< Simultaneous LE and BR/EDR, Host. */
+#define BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE (BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE | BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED) /**< LE Limited Discoverable Mode, BR/EDR not supported. */
+#define BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE (BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE | BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED) /**< LE General Discoverable Mode, BR/EDR not supported. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_ADV_INTERVALS GAP Advertising interval max and min
+ * @{ */
+#define BLE_GAP_ADV_INTERVAL_MIN 0x0020 /**< Minimum Advertising interval in 625 us units, i.e. 20 ms. */
+#define BLE_GAP_ADV_NONCON_INTERVAL_MIN 0x00A0 /**< Minimum Advertising interval in 625 us units for non connectable mode, i.e. 100 ms. */
+#define BLE_GAP_ADV_INTERVAL_MAX 0x4000 /**< Maximum Advertising interval in 625 us units, i.e. 10.24 s. */
+ /** @} */
+
+
+/** @brief Maximum size of advertising data in octets. */
+#define BLE_GAP_ADV_MAX_SIZE 31
+
+
+/** @defgroup BLE_GAP_ADV_TYPES GAP Advertising types
+ * @{ */
+#define BLE_GAP_ADV_TYPE_ADV_IND 0x00 /**< Connectable undirected. */
+#define BLE_GAP_ADV_TYPE_ADV_DIRECT_IND 0x01 /**< Connectable directed. */
+#define BLE_GAP_ADV_TYPE_ADV_SCAN_IND 0x02 /**< Scannable undirected. */
+#define BLE_GAP_ADV_TYPE_ADV_NONCONN_IND 0x03 /**< Non connectable undirected. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_ADV_FILTER_POLICIES GAP Advertising filter policies
+ * @{ */
+#define BLE_GAP_ADV_FP_ANY 0x00 /**< Allow scan requests and connect requests from any device. */
+#define BLE_GAP_ADV_FP_FILTER_SCANREQ 0x01 /**< Filter scan requests with whitelist. */
+#define BLE_GAP_ADV_FP_FILTER_CONNREQ 0x02 /**< Filter connect requests with whitelist. */
+#define BLE_GAP_ADV_FP_FILTER_BOTH 0x03 /**< Filter both scan and connect requests with whitelist. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_ADV_TIMEOUT_VALUES GAP Advertising timeout values
+ * @{ */
+#define BLE_GAP_ADV_TIMEOUT_LIMITED_MAX 180 /**< Maximum advertising time in limited discoverable mode (TGAP(lim_adv_timeout) = 180s in spec (Addendum 2)). */
+#define BLE_GAP_ADV_TIMEOUT_GENERAL_UNLIMITED 0 /**< Unlimited advertising in general discoverable mode. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_DISC_MODES GAP Discovery modes
+ * @{ */
+#define BLE_GAP_DISC_MODE_NOT_DISCOVERABLE 0x00 /**< Not discoverable discovery Mode. */
+#define BLE_GAP_DISC_MODE_LIMITED 0x01 /**< Limited Discovery Mode. */
+#define BLE_GAP_DISC_MODE_GENERAL 0x02 /**< General Discovery Mode. */
+/** @} */
+
+/** @defgroup BLE_GAP_IO_CAPS GAP IO Capabilities
+ * @{ */
+#define BLE_GAP_IO_CAPS_DISPLAY_ONLY 0x00 /**< Display Only. */
+#define BLE_GAP_IO_CAPS_DISPLAY_YESNO 0x01 /**< Display and Yes/No entry. */
+#define BLE_GAP_IO_CAPS_KEYBOARD_ONLY 0x02 /**< Keyboard Only. */
+#define BLE_GAP_IO_CAPS_NONE 0x03 /**< No I/O capabilities. */
+#define BLE_GAP_IO_CAPS_KEYBOARD_DISPLAY 0x04 /**< Keyboard and Display. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_AUTH_KEY_TYPES GAP Authentication Key Types
+ * @{ */
+#define BLE_GAP_AUTH_KEY_TYPE_NONE 0x00 /**< No key (may be used to reject). */
+#define BLE_GAP_AUTH_KEY_TYPE_PASSKEY 0x01 /**< 6-digit Passkey. */
+#define BLE_GAP_AUTH_KEY_TYPE_OOB 0x02 /**< Out Of Band data. */
+/** @} */
+
+/** @defgroup BLE_GAP_SEC_STATUS GAP Security status
+ * @{ */
+#define BLE_GAP_SEC_STATUS_SUCCESS 0x00 /**< Successful parameters. */
+#define BLE_GAP_SEC_STATUS_TIMEOUT 0x01 /**< Procedure timed out. */
+#define BLE_GAP_SEC_STATUS_PDU_INVALID 0x02 /**< Invalid PDU received. */
+#define BLE_GAP_SEC_STATUS_PASSKEY_ENTRY_FAILED 0x81 /**< Passkey entry failed (user cancelled or other). */
+#define BLE_GAP_SEC_STATUS_OOB_NOT_AVAILABLE 0x82 /**< Out of Band Key not available. */
+#define BLE_GAP_SEC_STATUS_AUTH_REQ 0x83 /**< Authentication requirements not met. */
+#define BLE_GAP_SEC_STATUS_CONFIRM_VALUE 0x84 /**< Confirm value failed. */
+#define BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP 0x85 /**< Pairing not supported. */
+#define BLE_GAP_SEC_STATUS_ENC_KEY_SIZE 0x86 /**< Encryption key size. */
+#define BLE_GAP_SEC_STATUS_SMP_CMD_UNSUPPORTED 0x87 /**< Unsupported SMP command. */
+#define BLE_GAP_SEC_STATUS_UNSPECIFIED 0x88 /**< Unspecified reason. */
+#define BLE_GAP_SEC_STATUS_REPEATED_ATTEMPTS 0x89 /**< Too little time elapsed since last attempt. */
+#define BLE_GAP_SEC_STATUS_INVALID_PARAMS 0x8A /**< Invalid parameters. */
+/** @} */
+
+/** @defgroup BLE_GAP_SEC_STATUS_SOURCES GAP Security status sources
+ * @{ */
+#define BLE_GAP_SEC_STATUS_SOURCE_LOCAL 0x00 /**< Local failure. */
+#define BLE_GAP_SEC_STATUS_SOURCE_REMOTE 0x01 /**< Remote failure. */
+/** @} */
+
+/** @defgroup BLE_GAP_CP_LIMITS GAP Connection Parameters Limits
+ * @{ */
+#define BLE_GAP_CP_MIN_CONN_INTVL_NONE 0xFFFF /**< No new minimum connction interval specified in connect parameters. */
+#define BLE_GAP_CP_MIN_CONN_INTVL_MIN 0x0006 /**< Lowest mimimum connection interval permitted, in units of 1.25 ms, i.e. 7.5 ms. */
+#define BLE_GAP_CP_MIN_CONN_INTVL_MAX 0x0C80 /**< Highest minimum connection interval permitted, in units of 1.25 ms, i.e. 4 s. */
+#define BLE_GAP_CP_MAX_CONN_INTVL_NONE 0xFFFF /**< No new maximum connction interval specified in connect parameters. */
+#define BLE_GAP_CP_MAX_CONN_INTVL_MIN 0x0006 /**< Lowest maximum connection interval permitted, in units of 1.25 ms, i.e. 7.5 ms. */
+#define BLE_GAP_CP_MAX_CONN_INTVL_MAX 0x0C80 /**< Highest maximum connection interval permitted, in units of 1.25 ms, i.e. 4 s. */
+#define BLE_GAP_CP_SLAVE_LATENCY_MAX 0x03E8 /**< Highest slave latency permitted, in connection events. */
+#define BLE_GAP_CP_CONN_SUP_TIMEOUT_NONE 0xFFFF /**< No new supervision timeout specified in connect parameters. */
+#define BLE_GAP_CP_CONN_SUP_TIMEOUT_MIN 0x000A /**< Lowest supervision timeout permitted, in units of 10 ms, i.e. 100 ms. */
+#define BLE_GAP_CP_CONN_SUP_TIMEOUT_MAX 0x0C80 /**< Highest supervision timeout permitted, in units of 10 ms, i.e. 32 s. */
+/** @} */
+
+
+/**@brief GAP device name maximum length. */
+#define BLE_GAP_DEVNAME_MAX_LEN 31
+
+
+/** @defgroup BLE_GAP_CONN_SEC_MODE_SET_MACROS GAP attribute security requirement setters
+ *
+ * See @ref ble_gap_conn_sec_mode_t.
+ * @{ */
+/** @brief Set sec_mode pointed to by ptr to have no access rights.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(ptr) do {(ptr)->sm = 0; (ptr)->lv = 0;} while(0)
+/** @brief Set sec_mode pointed to by ptr to require no protection, open link.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_OPEN(ptr) do {(ptr)->sm = 1; (ptr)->lv = 1;} while(0)
+/** @brief Set sec_mode pointed to by ptr to require encryption, but no MITM protection.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 2;} while(0)
+/** @brief Set sec_mode pointed to by ptr to require encryption and MITM protection.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_ENC_WITH_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 3;} while(0)
+/** @brief Set sec_mode pointed to by ptr to require signing or encryption, no MITM protection needed.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_SIGNED_NO_MITM(ptr) do {(ptr)->sm = 2; (ptr)->lv = 1;} while(0)
+/** @brief Set sec_mode pointed to by ptr to require signing or encryption with MITM protection.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_SIGNED_WITH_MITM(ptr) do {(ptr)->sm = 2; (ptr)->lv = 2;} while(0)
+/** @} */
+
+
+/**@brief GAP Security Key Length. */
+#define BLE_GAP_SEC_KEY_LEN 16
+
+/**@brief Maximum amount of addresses in a whitelist. */
+#define BLE_GAP_WHITELIST_ADDR_MAX_COUNT (8)
+
+/**@brief Maximum amount of IRKs in a whitelist.
+ * @note The number of IRKs is limited to 8, even if the hardware supports more.
+ */
+#define BLE_GAP_WHITELIST_IRK_MAX_COUNT (8)
+
+/** @defgroup GAP_SEC_MODES GAP Security Modes
+ * @{ */
+#define BLE_GAP_SEC_MODE 0x00 /**< No key (may be used to reject). */
+
+/** @} */
+
+
+/** @} */
+
+/**@brief Bluetooth Low Energy address. */
+typedef struct
+{
+ uint8_t addr_type; /**< See @ref BLE_GAP_ADDR_TYPES. */
+ uint8_t addr[BLE_GAP_ADDR_LEN]; /**< 48-bit address, LSB format. */
+} ble_gap_addr_t;
+
+
+/**@brief GAP connection parameters.
+ *
+ * @note When ble_conn_params_t is received in an event, both min_conn_interval and
+ * max_conn_interval will be equal to the connection interval set by the central.
+ */
+typedef struct
+{
+ uint16_t min_conn_interval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
+ uint16_t max_conn_interval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
+ uint16_t slave_latency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
+ uint16_t conn_sup_timeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
+} ble_gap_conn_params_t;
+
+
+/**@brief GAP link requirements.
+ *
+ * See Bluetooth Core specification, Volume 3 Part C 10.2 for details.
+ *
+ * Security Mode 0 Level 0: No access permissions at all (this level is not defined by the Bluetooth Core specification).\n
+ * Security Mode 1 Level 1: No security is needed (aka open link).\n
+ * Security Mode 1 Level 2: Encrypted link required, MITM protection not necessary.\n
+ * Security Mode 1 Level 3: MITM protected encrypted link required.\n
+ * Security Mode 2 Level 1: Signing or encryption required, MITM protection not necessary.\n
+ * Security Mode 2 Level 2: MITM protected signing required, unless link is MITM protected encrypted.\n
+ */
+typedef struct
+{
+ uint8_t sm : 4; /**< Security Mode (1 or 2), 0 for no permissions at all. */
+ uint8_t lv : 4; /**< Level (1, 2 or 3), 0 for no permissions at all. */
+
+} ble_gap_conn_sec_mode_t;
+
+
+
+/**@brief GAP connection security status.*/
+typedef struct
+{
+ ble_gap_conn_sec_mode_t sec_mode; /**< Currently active security mode for this connection.*/
+ uint8_t encr_key_size; /**< Length of currently active encryption key, 7 to 16 octets.*/
+} ble_gap_conn_sec_t;
+
+
+
+/**@brief Identity Resolving Key. */
+typedef struct
+{
+ uint8_t irk[BLE_GAP_SEC_KEY_LEN]; /**< Array containing IRK. */
+} ble_gap_irk_t;
+
+
+/**@brief Whitelist structure. */
+typedef struct
+{
+ ble_gap_addr_t ** pp_addrs; /**< Pointer to array of device address pointers, pointing to addresses to be used in whitelist. NULL if none are given. */
+ uint8_t addr_count; /**< Count of device addresses in array, up to @ref BLE_GAP_WHITELIST_ADDR_MAX_COUNT. */
+ ble_gap_irk_t ** pp_irks; /**< Pointer to array of Identity Resolving Key (IRK) pointers, each pointing to an IRK in the whitelist. NULL if none are given. */
+ uint8_t irk_count; /**< Count of IRKs in array, up to @ref BLE_GAP_WHITELIST_IRK_MAX_COUNT. */
+} ble_gap_whitelist_t;
+
+
+/**@brief GAP advertising parameters.*/
+typedef struct
+{
+ uint8_t type; /**< See @ref BLE_GAP_ADV_TYPES. */
+ ble_gap_addr_t* p_peer_addr; /**< For BLE_GAP_CONN_MODE_DIRECTED mode only, known peer address. */
+ uint8_t fp; /**< Filter Policy, see @ref BLE_GAP_ADV_FILTER_POLICIES. */
+ ble_gap_whitelist_t * p_whitelist; /**< Pointer to whitelist, NULL if none is given. */
+ uint16_t interval; /**< Advertising interval between 0x0020 and 0x4000 in 0.625 ms units (20ms to 10.24s), see @ref BLE_GAP_ADV_INTERVALS. This parameter must be set to 0 if type equals @ref BLE_GAP_ADV_TYPE_ADV_DIRECT_IND. */
+ uint16_t timeout; /**< Advertising timeout between 0x0001 and 0x3FFF in seconds, 0x0000 disables timeout. See also @ref BLE_GAP_ADV_TIMEOUT_VALUES. This parameter must be set to 0 if type equals @ref BLE_GAP_ADV_TYPE_ADV_DIRECT_IND. */
+} ble_gap_adv_params_t;
+
+
+/**@brief GAP scanning parameters. */
+typedef struct
+{
+ uint8_t filter; /**< Filter based on discovery mode, see @ref BLE_GAP_DISC_MODES. */
+ uint8_t active : 1; /**< If 1, perform active scanning (scan requests). */
+ uint8_t selective : 1; /**< If 1, ignore unknown devices (non whitelisted). */
+ uint16_t interval; /**< Scan interval between 0x0020 and 0x4000 in 0.625ms units (20ms to 10.24s). */
+ uint16_t window; /**< Scan window between 0x0004 and 0x4000 in 0.625ms units (2.5ms to 10.24s). */
+ uint16_t timeout; /**< Scan timeout between 0x0001 and 0x3FFF in seconds, 0x0000 disables timeout. */
+} ble_gap_scan_params_t;
+
+
+/**@brief GAP security parameters. */
+typedef struct
+{
+ uint16_t timeout; /**< Timeout for SMP transactions or Security Request in seconds, see @ref sd_ble_gap_authenticate and @ref sd_ble_gap_sec_params_reply for more information. */
+ uint8_t bond : 1; /**< Perform bonding. */
+ uint8_t mitm : 1; /**< Man In The Middle protection required. */
+ uint8_t io_caps : 3; /**< IO capabilities, see @ref BLE_GAP_IO_CAPS. */
+ uint8_t oob : 1; /**< Out Of Band data available. */
+ uint8_t min_key_size; /**< Minimum encryption key size in octets between 7 and 16. */
+ uint8_t max_key_size; /**< Maximum encryption key size in octets between min_key_size and 16. */
+} ble_gap_sec_params_t;
+
+
+/**@brief GAP Encryption Information. */
+typedef struct
+{
+ uint16_t div; /**< Encryption Diversifier. */
+ uint8_t ltk[BLE_GAP_SEC_KEY_LEN]; /**< Long Term Key. */
+ uint8_t auth : 1; /**< Authenticated Key. */
+ uint8_t ltk_len : 7; /**< LTK length in octets. */
+} ble_gap_enc_info_t;
+
+
+/**@brief GAP Master Identification. */
+typedef struct
+{
+ uint16_t ediv; /**< Encrypted Diversifier. */
+ uint8_t rand[8]; /**< Random Number. */
+} ble_gap_master_id_t;
+
+
+/**@brief GAP Identity Information. */
+typedef struct
+{
+ ble_gap_addr_t addr; /**< Bluetooth address to which this key applies. */
+ uint8_t irk[BLE_GAP_SEC_KEY_LEN]; /**< Identity Resolution Key. */
+} ble_gap_id_info_t;
+
+
+/**@brief GAP Signing Information. */
+typedef struct
+{
+ uint8_t csrk[BLE_GAP_SEC_KEY_LEN]; /* Connection Signature Resolving Key. */
+} ble_gap_sign_info_t;
+
+
+
+/**
+ * @brief GAP Event IDs.
+ * Those IDs uniquely identify an event coming from the stack to the application.
+ */
+enum BLE_GAP_EVTS
+{
+ BLE_GAP_EVT_CONNECTED = BLE_GAP_EVT_BASE, /**< Connection established. */
+ BLE_GAP_EVT_DISCONNECTED, /**< Disconnected from peer. */
+ BLE_GAP_EVT_CONN_PARAM_UPDATE, /**< Connection Parameters updated. */
+ BLE_GAP_EVT_SEC_PARAMS_REQUEST, /**< Request to provide security parameters. */
+ BLE_GAP_EVT_SEC_INFO_REQUEST, /**< Request to provide security information. */
+ BLE_GAP_EVT_PASSKEY_DISPLAY, /**< Request to display a passkey to the user. */
+ BLE_GAP_EVT_AUTH_KEY_REQUEST, /**< Request to provide an authentication key. */
+ BLE_GAP_EVT_AUTH_STATUS, /**< Authentication procedure completed with status. */
+ BLE_GAP_EVT_CONN_SEC_UPDATE, /**< Connection security updated. */
+ BLE_GAP_EVT_TIMEOUT, /**< Timeout expired. */
+ BLE_GAP_EVT_RSSI_CHANGED, /**< Signal strength measurement report. */
+};
+
+
+/** @brief Event data for connected event. */
+typedef struct
+{
+ ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. */
+ uint8_t irk_match :1; /**< If 1, peer device's address resolved using an IRK. */
+ uint8_t irk_match_idx :7; /**< Index in IRK list where the address was matched. */
+ ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */
+} ble_gap_evt_connected_t;
+
+
+/** @brief Event data for disconnected event. */
+typedef struct
+{
+ uint8_t reason; /**< HCI error code. */
+} ble_gap_evt_disconnected_t;
+
+
+/** @brief Event data for connection parameter update event. */
+typedef struct
+{
+ ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */
+} ble_gap_evt_conn_param_update_t;
+
+
+/** @brief Event data for security parameters request event. */
+typedef struct
+{
+ ble_gap_sec_params_t peer_params; /**< Initiator Security Parameters. */
+} ble_gap_evt_sec_params_request_t;
+
+
+/** @brief Event data for securito info request event. */
+typedef struct
+{
+ ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. */
+ uint16_t div; /**< Encryption diversifier for LTK lookup. */
+ uint8_t enc_info : 1; /**< If 1, Encryption Information required. */
+ uint8_t id_info : 1; /**< If 1, Identity Information required. */
+ uint8_t sign_info : 1; /**< If 1, Signing Information required. */
+} ble_gap_evt_sec_info_request_t;
+
+
+/** @brief Event data for passkey display event. */
+typedef struct
+{
+ uint8_t passkey[6]; /**< 6-digit passkey in ASCII ('0'-'9' digits only). */
+} ble_gap_evt_passkey_display_t;
+
+
+/** @brief Event data for authentication key request event. */
+typedef struct
+{
+ uint8_t key_type; /**< See @ref BLE_GAP_AUTH_KEY_TYPES. */
+} ble_gap_evt_auth_key_request_t;
+
+
+/** @brief Security levels supported.
+ * @note See Bluetooth Specification Version 4.0 Volume 3, Chapter 10.
+*/
+typedef struct
+{
+ uint8_t lv1 : 1; /**< If 1: Level 1 is supported. */
+ uint8_t lv2 : 1; /**< If 1: Level 2 is supported. */
+ uint8_t lv3 : 1; /**< If 1: Level 3 is supported. */
+} ble_gap_sec_levels_t;
+
+
+/** @brief Keys that have been exchanged. */
+typedef struct
+{
+ uint8_t ltk : 1; /**< Long Term Key. */
+ uint8_t ediv_rand : 1; /**< Encrypted Diversifier and Random value. */
+ uint8_t irk : 1; /**< Identity Resolving Key. */
+ uint8_t address : 1; /**< Public or static random address. */
+ uint8_t csrk : 1; /**< Connection Signature Resolving Key. */
+} ble_gap_sec_keys_t;
+
+
+/** @brief Event data for authentication status event. */
+typedef struct
+{
+ uint8_t auth_status; /**< Authentication status, see @ref BLE_GAP_SEC_STATUS. */
+ uint8_t error_src; /**< On error, source that caused the failure, see @ref BLE_GAP_SEC_STATUS_SOURCES. */
+ ble_gap_sec_levels_t sm1_levels; /**< Levels supported in Security Mode 1. */
+ ble_gap_sec_levels_t sm2_levels; /**< Levels supported in Security Mode 2. */
+ ble_gap_sec_keys_t periph_kex; /**< Bitmap stating which keys were exchanged (distributed) by the peripheral. */
+ ble_gap_sec_keys_t central_kex; /**< Bitmap stating which keys were exchanged (distributed) by the central. */
+ struct periph_keys_t
+ {
+ ble_gap_enc_info_t enc_info; /**< Peripheral's Encryption information. */
+ } periph_keys; /**< Actual keys distributed from the Peripheral to the Central. */
+ struct central_keys_t
+ {
+ ble_gap_irk_t irk; /**< Central's IRK. */
+ ble_gap_addr_t id_info; /**< Central's Identity Info. */
+ } central_keys; /**< Actual keys distributed from the Central to the Peripheral. */
+} ble_gap_evt_auth_status_t;
+
+
+/** @brief Event data for connection security update event. */
+typedef struct
+{
+ ble_gap_conn_sec_t conn_sec; /**< Connection security level. */
+} ble_gap_evt_conn_sec_update_t;
+
+
+/** @brief Event data for timeout event. */
+typedef struct
+{
+ uint8_t src; /**< Source of timeout event, see @ref BLE_GAP_TIMEOUT_SOURCES. */
+} ble_gap_evt_timeout_t;
+
+
+/** @brief Event data for advertisement report event. */
+typedef struct
+{
+ int8_t rssi; /**< Received Signal Strength Indication in dBm. */
+} ble_gap_evt_rssi_changed_t;
+
+
+
+/**@brief GAP event callback event structure. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which event occured. */
+ union /**< union alternative identified by evt_id in enclosing struct. */
+ {
+ ble_gap_evt_connected_t connected; /**< Connected Event Parameters. */
+ ble_gap_evt_disconnected_t disconnected; /**< Disconnected Event Parameters. */
+ ble_gap_evt_conn_param_update_t conn_param_update; /**< Connection Parameter Update Parameters. */
+ ble_gap_evt_sec_params_request_t sec_params_request; /**< Security Parameters Request Event Parameters. */
+ ble_gap_evt_sec_info_request_t sec_info_request; /**< Security Information Request Event Parameters. */
+ ble_gap_evt_passkey_display_t passkey_display; /**< Passkey Display Event Parameters. */
+ ble_gap_evt_auth_key_request_t auth_key_request; /**< Authentication Key Request Event Parameters. */
+ ble_gap_evt_auth_status_t auth_status; /**< Authentication Status Event Parameters. */
+ ble_gap_evt_conn_sec_update_t conn_sec_update; /**< Connection Security Update Event Parameters. */
+ ble_gap_evt_timeout_t timeout; /**< Timeout Event Parameters. */
+ ble_gap_evt_rssi_changed_t rssi_changed; /**< RSSI Event parameters. */
+ } params;
+
+} ble_gap_evt_t;
+
+
+/**@brief Set local Bluetooth address.
+ *
+ * @param[in] p_addr Pointer to address structure.
+ *
+ * @return @ref NRF_SUCCESS Address successfully set.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address.
+ * @return @ref NRF_ERROR_BUSY The stack is busy, process pending events and retry.
+ */
+SVCALL(SD_BLE_GAP_ADDRESS_SET, uint32_t, sd_ble_gap_address_set(ble_gap_addr_t const * const p_addr));
+
+
+/**@brief Get local Bluetooth address.
+ *
+ * @param[out] p_addr Pointer to address structure.
+ *
+ * @return @ref NRF_SUCCESS Address successfully retrieved.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ */
+SVCALL(SD_BLE_GAP_ADDRESS_GET, uint32_t, sd_ble_gap_address_get(ble_gap_addr_t * const p_addr));
+
+
+/**@brief Set, clear or update advertisement and scan response data.
+ *
+ * @note The format of the advertisement data will be checked by this call to ensure interoperability.
+ * Limitations imposed by this API call to the data provided include having a flags data type in the scan response data and
+ * duplicating the local name in the advertisement data and scan response data.
+ *
+ * @note: To clear the advertisement data and set it to a 0-length packet, simply provide a valid pointer (p_data/p_sr_data) with its corresponding
+ * length (dlen/srdlen) set to 0.
+ *
+ * @note: The call will fail if p_data and p_sr_data are both NULL since this would have no effect.
+ *
+ * @param[in] p_data Raw data to be placed in advertisement packet. If NULL, no changes are made to the current advertisement packet data.
+ * @param[in] dlen Data length for p_data. Max size: @ref BLE_GAP_ADV_MAX_SIZE octets. Should be 0 if p_data is NULL, can be 0 if p_data is not NULL.
+ * @param[in] p_sr_data Raw data to be placed in scan response packet. If NULL, no changes are made to the current scan response packet data.
+ * @param[in] srdlen Data length for p_sr_data. Max size: @ref BLE_GAP_ADV_MAX_SIZE octets. Should be 0 if p_sr_data is NULL, can be 0 if p_data is not NULL.
+ *
+ * @return @ref NRF_SUCCESS Advertisement data successfully updated or cleared.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_FLAGS Invalid combination of advertising flags supplied.
+ * @return @ref NRF_ERROR_INVALID_DATA Invalid data type(s) supplied, check the advertising data format specification.
+ * @return @ref NRF_ERROR_INVALID_LENGTH Invalid data length(s) supplied.
+ * @return @ref BLE_ERROR_GAP_UUID_LIST_MISMATCH Invalid UUID list supplied.
+ * @return @ref NRF_ERROR_BUSY The stack is busy, process pending events and retry.
+ */
+SVCALL(SD_BLE_GAP_ADV_DATA_SET, uint32_t, sd_ble_gap_adv_data_set(uint8_t const * const p_data, uint8_t dlen, uint8_t const * const p_sr_data, uint8_t srdlen));
+
+
+/**@brief Start advertising (GAP Discoverable, Connectable modes, Broadcast Procedure).
+ *
+ * @param[in] p_adv_params Pointer to advertising parameters structure.
+ *
+ * @return @ref NRF_SUCCESS The BLE stack has started advertising.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check the accepted ranges and limits.
+ * @return @ref BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid Bluetooth address supplied.
+ * @return @ref BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST Discoverable mode and whitelist incompatible.
+ */
+SVCALL(SD_BLE_GAP_ADV_START, uint32_t, sd_ble_gap_adv_start(ble_gap_adv_params_t const * const p_adv_params));
+
+
+/**@brief Stop advertising (GAP Discoverable, Connectable modes, Broadcast Procedure).
+ *
+ * @return @ref NRF_SUCCESS The BLE stack has stopped advertising.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation (most probably not in advertising state).
+ */
+SVCALL(SD_BLE_GAP_ADV_STOP, uint32_t, sd_ble_gap_adv_stop(void));
+
+
+/**@brief Update connection parameters.
+ *
+ * @details In the central role this will initiate a Link Layer connection parameter update procedure,
+ * otherwise in the peripheral role, this will send the corresponding L2CAP request and wait for
+ * the central to perform the procedure. In both cases, and regardless of success or failure, the application
+ * will be informed of the result with a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE event.
+ *
+ * @note If both a connection supervision timeout and a maximum connection interval are specified, then the following constraint
+ * applies: (conn_sup_timeout * 8) >= (max_conn_interval * (slave_latency + 1))
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_conn_params Pointer to desired connection parameters. If NULL is provided on a peripheral role,
+ * the parameters in the PPCP characteristic of the GAP service will be used instead.
+ *
+ * @return @ref NRF_SUCCESS The Connection Update procedure has been started successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints.
+ * @return @ref NRF_ERROR_BUSY Procedure already in progress or not allowed at this time, process pending events and retry.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_GAP_CONN_PARAM_UPDATE, uint32_t, sd_ble_gap_conn_param_update(uint16_t conn_handle, ble_gap_conn_params_t const * const p_conn_params));
+
+
+/**@brief Disconnect (GAP Link Termination).
+ *
+ * @details This call initiates the disconnection procedure, and its completion will be communicated to the application
+ * with a BLE_GAP_EVT_DISCONNECTED event.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] hci_status_code HCI status code, see @ref BLE_HCI_STATUS_CODES (accepted values are BTLE_REMOTE_USER_TERMINATED_CONNECTION and BTLE_CONN_INTERVAL_UNACCEPTABLE).
+ *
+ * @return @ref NRF_SUCCESS The disconnection procedure has been started successfully.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation (disconnection is already in progress or not connected at all).
+ */
+SVCALL(SD_BLE_GAP_DISCONNECT, uint32_t, sd_ble_gap_disconnect(uint16_t conn_handle, uint8_t hci_status_code));
+
+
+/**@brief Set the radio's transmit power.
+ *
+ * @param[in] tx_power Radio transmit power in dBm (accepted values are -40, -30, -20, -16, -12, -8, -4, 0, and 4 dBm).
+ *
+ * @note -40 dBm will not actually give -40 dBm, but will instead be remapped to -30 dBm.
+ *
+ * @return @ref NRF_SUCCESS Successfully changed the transmit power.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_BUSY The stack is busy, process pending events and retry.
+ */
+SVCALL(SD_BLE_GAP_TX_POWER_SET, uint32_t, sd_ble_gap_tx_power_set(int8_t tx_power));
+
+
+/**@brief Set GAP Appearance value.
+ *
+ * @param[in] appearance Appearance (16-bit), see @ref BLE_APPEARANCES.
+ *
+ * @return @ref NRF_SUCCESS Appearance value set successfully.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ */
+SVCALL(SD_BLE_GAP_APPEARANCE_SET, uint32_t, sd_ble_gap_appearance_set(uint16_t appearance));
+
+
+/**@brief Get GAP Appearance value.
+ *
+ * @param[out] p_appearance Appearance (16-bit), see @ref BLE_APPEARANCES.
+ *
+ * @return @ref NRF_SUCCESS Appearance value retrieved successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ */
+SVCALL(SD_BLE_GAP_APPEARANCE_GET, uint32_t, sd_ble_gap_appearance_get(uint16_t * const p_appearance));
+
+
+/**@brief Set GAP Peripheral Preferred Connection Parameters.
+ *
+ * @param[in] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure with the desired parameters.
+ *
+ * @return @ref NRF_SUCCESS Peripheral Preferred Connection Parameters set successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ */
+SVCALL(SD_BLE_GAP_PPCP_SET, uint32_t, sd_ble_gap_ppcp_set(ble_gap_conn_params_t const * const p_conn_params));
+
+
+/**@brief Get GAP Peripheral Preferred Connection Parameters.
+ *
+ * @param[out] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure where the parameters will be stored.
+ *
+ * @return @ref NRF_SUCCESS Peripheral Preferred Connection Parameters retrieved successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ */
+SVCALL(SD_BLE_GAP_PPCP_GET, uint32_t, sd_ble_gap_ppcp_get(ble_gap_conn_params_t * const p_conn_params));
+
+
+/**@brief Set GAP device name.
+ *
+ * @param[in] p_write_perm Write permissions for the Device Name characteristic see @ref ble_gap_conn_sec_mode_t.
+ * @param[in] p_dev_name Pointer to a UTF-8 encoded, <b>non NULL-terminated</b> string.
+ * @param[in] len Length of the UTF-8, <b>non NULL-terminated</b> string pointed to by p_dev_name in octets (must be smaller or equal than @ref BLE_GAP_DEVNAME_MAX_LEN).
+ *
+ * @return @ref NRF_SUCCESS GAP device name and permissions set successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
+ */
+SVCALL(SD_BLE_GAP_DEVICE_NAME_SET, uint32_t, sd_ble_gap_device_name_set(ble_gap_conn_sec_mode_t const * const p_write_perm, uint8_t const * const p_dev_name, uint16_t len));
+
+
+/**@brief Get GAP device name.
+ *
+ * @param[in] p_dev_name Pointer to an empty buffer where the UTF-8 <b>non NULL-terminated</b> string will be placed. Set to NULL to obtain the complete device name length.
+ * @param[in,out] p_len Length of the buffer pointed by p_dev_name, complete device name length on output.
+ *
+ * @note If the device name is longer than the size of the supplied buffer,
+ * p_len will return the complete device name length,
+ * and not the number of bytes actually returned in p_dev_name.
+ * The application may use this information to allocate a suitable buffer size.
+ *
+ * @return @ref NRF_SUCCESS GAP device name retrieved successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
+ */
+SVCALL(SD_BLE_GAP_DEVICE_NAME_GET, uint32_t, sd_ble_gap_device_name_get(uint8_t * const p_dev_name, uint16_t * const p_len));
+
+
+/**@brief Initiate GAP Authentication procedure.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_sec_params Pointer to the @ref ble_gap_sec_params_t structure with the security parameters to be used during the pairing procedure.
+ *
+ * @details In the central role, this function will send an SMP Pairing Request, otherwise in the peripheral role, an SMP Security Request will be sent.
+ * In the peripheral role, only the timeout, bond and mitm fields of @ref ble_gap_sec_params_t are used.
+ *
+ * @note The GAP Authentication procedure may be triggered by the central without calling this function when accessing a secure service.
+ * @note Calling this function may result in the following events depending on the outcome and parameters: @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST,
+ * @ref BLE_GAP_EVT_SEC_INFO_REQUEST, @ref BLE_GAP_EVT_AUTH_KEY_REQUEST, @ref BLE_GAP_EVT_AUTH_STATUS.
+ * @note The timeout parameter in @ref ble_gap_sec_params_t is interpreted here as the Security Request timeout
+ *
+ *
+ * @return @ref NRF_SUCCESS Successfully initiated authentication procedure.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_AUTHENTICATE, uint32_t, sd_ble_gap_authenticate(uint16_t conn_handle, ble_gap_sec_params_t const * const p_sec_params));
+
+
+/**@brief Reply with GAP security parameters.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] sec_status Security status, see @ref BLE_GAP_SEC_STATUS.
+ * @param[in] p_sec_params Pointer to a @ref ble_gap_sec_params_t security parameters structure.
+ *
+ * @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST, calling it at other times will result in an NRF_ERROR_INVALID_STATE.
+ * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters.
+ * @note The timeout parameter in @ref ble_gap_sec_params_t is interpreted here as the SMP procedure timeout, and must be 30 seconds. The function will fail
+ * if the application supplies a different value.
+ *
+ * @return @ref NRF_SUCCESS Successfully accepted security parameter from the application.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_SEC_PARAMS_REPLY, uint32_t, sd_ble_gap_sec_params_reply(uint16_t conn_handle, uint8_t sec_status, ble_gap_sec_params_t const * const p_sec_params));
+
+
+/**@brief Reply with an authentication key.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] key_type See @ref BLE_GAP_AUTH_KEY_TYPES.
+ * @param[in] key If key type is BLE_GAP_AUTH_KEY_TYPE_NONE, then NULL.
+ * If key type is BLE_GAP_AUTH_KEY_TYPE_PASSKEY, then a 6-byte ASCII string (digit 0..9 only, no NULL termination).
+ * If key type is BLE_GAP_AUTH_KEY_TYPE_OOB, then a 16-byte OOB key value in Little Endian format.
+ *
+ * @details This function is only used to reply to a @ref BLE_GAP_EVT_AUTH_KEY_REQUEST, calling it at other times will result in an NRF_ERROR_INVALID_STATE.
+ * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters.
+ *
+ * @return @ref NRF_SUCCESS Authentication key successfully set.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_AUTH_KEY_REPLY, uint32_t, sd_ble_gap_auth_key_reply(uint16_t conn_handle, uint8_t key_type, uint8_t const * const key));
+
+
+/**@brief Reply with GAP security information.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information structure. May be NULL to signal none is available.
+ * @param[in] p_sign_info Pointer to a @ref ble_gap_sign_info_t signing information structure. May be NULL to signal none is available.
+ *
+ * @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_INFO_REQUEST, calling it at other times will result in NRF_ERROR_INVALID_STATE.
+ * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters.
+ * @note Data signing is not implemented yet. p_sign_info must therefore be NULL.
+ *
+ * @return @ref NRF_SUCCESS Successfully accepted security information.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ * @return @ref NRF_ERROR_BUSY The stack is busy, process pending events and retry.
+ */
+SVCALL(SD_BLE_GAP_SEC_INFO_REPLY, uint32_t, sd_ble_gap_sec_info_reply(uint16_t conn_handle, ble_gap_enc_info_t const * const p_enc_info, ble_gap_sign_info_t const * const p_sign_info));
+
+
+/**@brief Get the current connection security.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[out] p_conn_sec Pointer to a @ref ble_gap_conn_sec_t structure to be filled in.
+ *
+ * @return @ref NRF_SUCCESS Current connection security successfully retrieved.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_CONN_SEC_GET, uint32_t, sd_ble_gap_conn_sec_get(uint16_t conn_handle, ble_gap_conn_sec_t * const p_conn_sec));
+
+
+/**@brief Start reporting the received signal strength to the application.
+ *
+ * A new event is reported whenever the RSSI value changes, until @ref sd_ble_gap_rssi_stop is called.
+ *
+ * @param[in] conn_handle Connection handle.
+ *
+ * @return @ref NRF_SUCCESS Successfully activated RSSI reporting.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_RSSI_START, uint32_t, sd_ble_gap_rssi_start(uint16_t conn_handle));
+
+
+/**@brief Stop reporting the received singnal strength.
+ *
+ * An RSSI change detected before the call but not yet received by the application
+ * may be reported after @ref sd_ble_gap_rssi_stop has been called.
+ *
+ * @param[in] conn_handle Connection handle.
+ *
+ * @return @ref NRF_SUCCESS Successfully deactivated RSSI reporting.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_RSSI_STOP, uint32_t, sd_ble_gap_rssi_stop(uint16_t conn_handle));
+
+#endif // BLE_GAP_H__
+
+/**
+ @}
+*/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_gatt.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_gatt.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,167 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @addtogroup BLE_GATT Generic Attribute Profile (GATT) Common
+ @{
+ @brief Common definitions and prototypes for the GATT interfaces.
+ */
+
+#ifndef BLE_GATT_H__
+#define BLE_GATT_H__
+
+#include "nordic_global.h"
+#include "ble_types.h"
+#include "ble_ranges.h"
+
+
+/** @addtogroup BLE_GATT_DEFINES Defines
+ * @{ */
+
+/** @brief Default MTU size. */
+#define GATT_MTU_SIZE_DEFAULT 23
+
+/** @brief Only the default MTU size of 23 is currently supported. */
+#define GATT_RX_MTU 23
+
+
+/**@brief Invalid Attribute Handle. */
+#define BLE_GATT_HANDLE_INVALID 0x0000
+
+/** @defgroup BLE_GATT_TIMEOUT_SOURCES GATT Timeout sources
+ * @{ */
+#define BLE_GATT_TIMEOUT_SRC_PROTOCOL 0x00 /**< ATT Protocol timeout. */
+/** @} */
+
+/** @defgroup BLE_GATT_WRITE_OPS GATT Write operations
+ * @{ */
+#define BLE_GATT_OP_INVALID 0x00 /**< Invalid Operation. */
+#define BLE_GATT_OP_WRITE_REQ 0x01 /**< Write Request. */
+#define BLE_GATT_OP_WRITE_CMD 0x02 /**< Write Command. */
+#define BLE_GATT_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */
+#define BLE_GATT_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */
+#define BLE_GATT_OP_EXEC_WRITE_REQ 0x05 /**< Execute Write Request. */
+/** @} */
+
+/** @defgroup BLE_GATT_EXEC_WRITE_FLAGS GATT Execute Write flags
+ * @{ */
+#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_CANCEL 0x00
+#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_WRITE 0x01
+/** @} */
+
+/** @defgroup BLE_GATT_HVX_TYPES GATT Handle Value operations
+ * @{ */
+#define BLE_GATT_HVX_INVALID 0x00 /**< Invalid Operation. */
+#define BLE_GATT_HVX_NOTIFICATION 0x01 /**< Handle Value Notification. */
+#define BLE_GATT_HVX_INDICATION 0x02 /**< Handle Value Indication. */
+/** @} */
+
+/** @defgroup BLE_GATT_STATUS_CODES GATT Status Codes
+ * @{ */
+#define BLE_GATT_STATUS_SUCCESS 0x0000 /**< Success. */
+#define BLE_GATT_STATUS_UNKNOWN 0x0001 /**< Unknown or not applicable status. */
+#define BLE_GATT_STATUS_ATTERR_INVALID 0x0100 /**< ATT Error: Invalid Error Code. */
+#define BLE_GATT_STATUS_ATTERR_INVALID_HANDLE 0x0101 /**< ATT Error: Invalid Attribute Handle. */
+#define BLE_GATT_STATUS_ATTERR_READ_NOT_PERMITTED 0x0102 /**< ATT Error: Read not permitted. */
+#define BLE_GATT_STATUS_ATTERR_WRITE_NOT_PERMITTED 0x0103 /**< ATT Error: Write not permitted. */
+#define BLE_GATT_STATUS_ATTERR_INVALID_PDU 0x0104 /**< ATT Error: Used in ATT as Invalid PDU. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHENTICATION 0x0105 /**< ATT Error: Authenticated link required. */
+#define BLE_GATT_STATUS_ATTERR_REQUEST_NOT_SUPPORTED 0x0106 /**< ATT Error: Used in ATT as Request Not Supported. */
+#define BLE_GATT_STATUS_ATTERR_INVALID_OFFSET 0x0107 /**< ATT Error: Offset specified was past the end of the attribute. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHORIZATION 0x0108 /**< ATT Error: Used in ATT as Insufficient Authorisation. */
+#define BLE_GATT_STATUS_ATTERR_PREPARE_QUEUE_FULL 0x0109 /**< ATT Error: Used in ATT as Prepare Queue Full. */
+#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_FOUND 0x010A /**< ATT Error: Used in ATT as Attribute not found. */
+#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_LONG 0x010B /**< ATT Error: Attribute cannot be read or written using read/write blob requests. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_ENC_KEY_SIZE 0x010C /**< ATT Error: Encryption key size used is insufficient. */
+#define BLE_GATT_STATUS_ATTERR_INVALID_ATT_VAL_LENGTH 0x010D /**< ATT Error: Invalid value size. */
+#define BLE_GATT_STATUS_ATTERR_UNLIKELY_ERROR 0x010E /**< ATT Error: Very unlikely error. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_ENCRYPTION 0x010F /**< ATT Error: Encrypted link required. */
+#define BLE_GATT_STATUS_ATTERR_UNSUPPORTED_GROUP_TYPE 0x0110 /**< ATT Error: Attribute type is not a supported grouping attribute. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_RESOURCES 0x0111 /**< ATT Error: Encrypted link required. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_BEGIN 0x0112 /**< ATT Error: Reserved for Future Use range #1 begin. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_END 0x017F /**< ATT Error: Reserved for Future Use range #1 end. */
+#define BLE_GATT_STATUS_ATTERR_APP_BEGIN 0x0180 /**< ATT Error: Application range begin. */
+#define BLE_GATT_STATUS_ATTERR_APP_END 0x019F /**< ATT Error: Application range end. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_BEGIN 0x01A0 /**< ATT Error: Reserved for Future Use range #2 begin. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_END 0x01DF /**< ATT Error: Reserved for Future Use range #2 end. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_BEGIN 0x01E0 /**< ATT Error: Reserved for Future Use range #3 begin. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_END 0x01FC /**< ATT Error: Reserved for Future Use range #3 end. */
+#define BLE_GATT_STATUS_ATTERR_CPS_CCCD_CONFIG_ERROR 0x01FD /**< ATT Common Profile and Service Error: Client Characteristic Configuration Descriptor improperly configured. */
+#define BLE_GATT_STATUS_ATTERR_CPS_PROC_ALR_IN_PROG 0x01FE /**< ATT Common Profile and Service Error: Procedure Already in Progress. */
+#define BLE_GATT_STATUS_ATTERR_CPS_OUT_OF_RANGE 0x01FF /**< ATT Common Profile and Service Error: Out Of Range. */
+/** @} */
+
+
+/** @defgroup BLE_GATT_CPF_FORMATS Characteristic Presentation Formats
+ * @note Found at http://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml
+ * @{ */
+#define BLE_GATT_CPF_FORMAT_RFU 0x00 /**< Reserved For Future Use. */
+#define BLE_GATT_CPF_FORMAT_BOOLEAN 0x01 /**< Boolean. */
+#define BLE_GATT_CPF_FORMAT_2BIT 0x02 /**< Unsigned 2-bit integer. */
+#define BLE_GATT_CPF_FORMAT_NIBBLE 0x03 /**< Unsigned 4-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT8 0x04 /**< Unsigned 8-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT12 0x05 /**< Unsigned 12-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT16 0x06 /**< Unsigned 16-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT24 0x07 /**< Unsigned 24-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT32 0x08 /**< Unsigned 32-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT48 0x09 /**< Unsigned 48-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT64 0x0A /**< Unsigned 64-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT128 0x0B /**< Unsigned 128-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT8 0x0C /**< Signed 2-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT12 0x0D /**< Signed 12-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT16 0x0E /**< Signed 16-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT24 0x0F /**< Signed 24-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT32 0x10 /**< Signed 32-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT48 0x11 /**< Signed 48-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT64 0x12 /**< Signed 64-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT128 0x13 /**< Signed 128-bit integer. */
+#define BLE_GATT_CPF_FORMAT_FLOAT32 0x14 /**< IEEE-754 32-bit floating point. */
+#define BLE_GATT_CPF_FORMAT_FLOAT64 0x15 /**< IEEE-754 64-bit floating point. */
+#define BLE_GATT_CPF_FORMAT_SFLOAT 0x16 /**< IEEE-11073 16-bit SFLOAT. */
+#define BLE_GATT_CPF_FORMAT_FLOAT 0x17 /**< IEEE-11073 32-bit FLOAT. */
+#define BLE_GATT_CPF_FORMAT_DUINT16 0x18 /**< IEEE-20601 format. */
+#define BLE_GATT_CPF_FORMAT_UTF8S 0x19 /**< UTF-8 string. */
+#define BLE_GATT_CPF_FORMAT_UTF16S 0x1A /**< UTF-16 string. */
+#define BLE_GATT_CPF_FORMAT_STRUCT 0x1B /**< Opaque Structure. */
+/** @} */
+
+/** @defgroup BLE_GATT_CPF_NAMESPACES GATT Bluetooth Namespaces
+ * @{
+ */
+#define BLE_GATT_CPF_NAMESPACE_BTSIG 0x01
+#define BLE_GATT_CPF_NAMESPACE_DESCRIPTION_UNKNOWN 0x0000
+/** @} */
+
+/** @} */
+
+/**@brief GATT Characteristic Properties. */
+typedef struct
+{
+ /* Standard properties */
+ uint8_t broadcast :1; /**< Broadcasting of value permitted. */
+ uint8_t read :1; /**< Reading value permitted. */
+ uint8_t write_wo_resp :1; /**< Writing value with Write Command permitted. */
+ uint8_t write :1; /**< Writing value with Write Request permitted. */
+ uint8_t notify :1; /**< Notications of value permitted. */
+ uint8_t indicate :1; /**< Indications of value permitted. */
+ uint8_t auth_signed_wr :1; /**< Writing value with Signed Write Command permitted. */
+} ble_gatt_char_props_t;
+
+/**@brief GATT Characteristic Extended Properties. */
+typedef struct
+{
+ /* Extended properties */
+ uint8_t reliable_wr :1; /**< Writing value with Queued Write Request permitted. */
+ uint8_t wr_aux :1; /**< Writing the Characteristic User Description permitted. */
+} ble_gatt_char_ext_props_t;
+
+#endif // BLE_GATT_H__
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_gattc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_gattc.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,396 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_GATTC Generic Attribute Profile (GATT) Client
+ @{
+ @brief Definitions and prototypes for the GATT Client interface.
+ */
+
+#ifndef BLE_GATTC_H__
+#define BLE_GATTC_H__
+
+#include "nordic_global.h"
+#include "ble_gatt.h"
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "nrf_svc.h"
+
+
+/**@brief GATTC API SVC numbers. */
+enum BLE_GATTC_SVCS
+{
+ SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER = BLE_GATTC_SVC_BASE, /**< Primary Service Discovery. */
+ SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, /**< Relationship Discovery. */
+ SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, /**< Characteristic Discovery. */
+ SD_BLE_GATTC_DESCRIPTORS_DISCOVER, /**< Characteristic Descriptor Discovery. */
+ SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, /**< Read Characteristic Value by UUID. */
+ SD_BLE_GATTC_READ, /**< Generic read. */
+ SD_BLE_GATTC_CHAR_VALUES_READ, /**< Read multiple Characteristic Values. */
+ SD_BLE_GATTC_WRITE, /**< Generic write. */
+ SD_BLE_GATTC_HV_CONFIRM /**< Handle Value Confirmation. */
+};
+
+/** @addtogroup BLE_GATTC_DEFINES Defines
+ * @{ */
+
+/** @defgroup BLE_ERRORS_GATTC SVC return values specific to GATTC
+ * @{ */
+#define BLE_ERROR_GATTC_PROC_NOT_PERMITTED (NRF_GATTC_ERR_BASE + 0x000)
+/** @} */
+
+/**@brief Last Attribute Handle. */
+#define BLE_GATTC_HANDLE_END 0xFFFF
+
+/** @} */
+
+/**@brief Operation Handle Range. */
+typedef struct
+{
+ uint16_t start_handle; /**< Start Handle. */
+ uint16_t end_handle; /**< End Handle. */
+} ble_gattc_handle_range_t;
+
+
+/**@brief GATT service. */
+typedef struct
+{
+ ble_uuid_t uuid; /**< Service UUID. */
+ ble_gattc_handle_range_t handle_range; /**< Service Handle Range. */
+} ble_gattc_service_t;
+
+
+/**@brief GATT include. */
+typedef struct
+{
+ uint16_t handle; /**< Include Handle. */
+ ble_gattc_service_t included_srvc; /**< Handle of the included service. */
+} ble_gattc_include_t;
+
+
+/**@brief GATT characteristic. */
+typedef struct
+{
+ ble_uuid_t uuid; /**< Characteristic UUID. */
+ ble_gatt_char_props_t char_props; /**< Characteristic Properties. */
+ uint8_t char_ext_props : 1; /**< Extended properties present. */
+ uint16_t handle_decl; /**< Handle of the Characteristic Declaration. */
+ uint16_t handle_value; /**< Handle of the Characteristic Value. */
+} ble_gattc_char_t;
+
+
+/**@brief GATT descriptor. */
+typedef struct
+{
+ uint16_t handle; /**< Descriptor Handle. */
+ ble_uuid_t uuid; /**< Descriptor UUID. */
+} ble_gattc_desc_t;
+
+
+/**@brief Write Parameters. */
+typedef struct
+{
+ uint8_t write_op; /**< Write Operation to be performed, see BLE_GATT_WRITE_OPS. */
+ uint16_t handle; /**< Handle to the attribute to be written. */
+ uint16_t offset; /**< Offset in bytes. */
+ uint16_t len; /**< Length of data in bytes. */
+ uint8_t* p_value; /**< Pointer to the value data. */
+ uint8_t flags; /**< Flags, see @ref BLE_GATT_EXEC_WRITE_FLAGS. */
+} ble_gattc_write_params_t;
+
+
+/**
+ * @brief GATT Client Event IDs.
+ */
+enum BLE_GATTC_EVTS
+{
+ BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP = BLE_GATTC_EVT_BASE, /**< Primary Service Discovery Response event. */
+ BLE_GATTC_EVT_REL_DISC_RSP, /**< Relationship Discovery Response event. */
+ BLE_GATTC_EVT_CHAR_DISC_RSP, /**< Characteristic Discovery Response event. */
+ BLE_GATTC_EVT_DESC_DISC_RSP, /**< Descriptor Discovery Response event. */
+ BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP, /**< Read By UUID Response event. */
+ BLE_GATTC_EVT_READ_RSP, /**< Read Response event. */
+ BLE_GATTC_EVT_CHAR_VALS_READ_RSP, /**< Read multiple Response event. */
+ BLE_GATTC_EVT_WRITE_RSP, /**< Write Response event. */
+ BLE_GATTC_EVT_HVX, /**< Handle Value Notification or Indication event. */
+ BLE_GATTC_EVT_TIMEOUT /**< Timeout event. */
+};
+
+/**@brief Event structure for BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Service count. */
+ ble_gattc_service_t services[1]; /**< Service data, variable length. */
+} ble_gattc_evt_prim_srvc_disc_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_REL_DISC_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Include count. */
+ ble_gattc_include_t includes[1]; /**< Include data, variable length. */
+} ble_gattc_evt_rel_disc_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_CHAR_DISC_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Characteristic count. */
+ ble_gattc_char_t chars[1]; /**< Characteristic data, variable length. */
+} ble_gattc_evt_char_disc_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_DESC_DISC_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Descriptor count. */
+ ble_gattc_desc_t descs[1]; /**< Descriptor data, variable length. */
+} ble_gattc_evt_desc_disc_rsp_t;
+
+/**@brief GATT read by UUID handle value pair. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ uint8_t *p_value; /**< Pointer to value, variable length (length available as value_len in ble_gattc_evt_read_by_uuid_rsp_t).
+ Please note that this pointer is absolute to the memory provided by the user when retrieving the event,
+ so it will effectively point to a location inside the handle_value array. */
+} ble_gattc_handle_value_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Handle-Value Pair Count. */
+ uint16_t value_len; /**< Length of the value in Handle-Value(s) list. */
+ ble_gattc_handle_value_t handle_value[1]; /**< Handle-Value(s) list, variable length. */
+} ble_gattc_evt_char_val_by_uuid_read_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_READ_RSP. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ uint16_t offset; /**< Offset of the attribute data. */
+ uint16_t len; /**< Attribute data length. */
+ uint8_t data[1]; /**< Attribute data, variable length. */
+} ble_gattc_evt_read_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_CHAR_VALS_READ_RSP. */
+typedef struct
+{
+ uint16_t len; /**< Concatenated Attribute values length. */
+ uint8_t values[1]; /**< Attribute values, variable length. */
+} ble_gattc_evt_char_vals_read_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_WRITE_RSP. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ uint8_t write_op; /**< Type of write operation, see @ref BLE_GATT_WRITE_OPS. */
+ uint16_t offset; /**< Data Offset. */
+ uint16_t len; /**< Data length. */
+ uint8_t data[1]; /**< Data, variable length. */
+} ble_gattc_evt_write_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_HVX. */
+typedef struct
+{
+ uint16_t handle; /**< Handle to which the HVx operation applies. */
+ uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */
+ uint16_t len; /**< Attribute data length. */
+ uint8_t data[1]; /**< Attribute data, variable length. */
+} ble_gattc_evt_hvx_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_TIMEOUT. */
+typedef struct
+{
+ uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */
+} ble_gattc_evt_timeout_t;
+
+/**@brief GATTC event type. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which event occured. */
+ uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
+ uint16_t error_handle; /**< In case of error: The handle causing the error. In all other cases BLE_GATT_HANDLE_INVALID. */
+ union
+ {
+ ble_gattc_evt_prim_srvc_disc_rsp_t prim_srvc_disc_rsp; /**< Primary Service Discovery Response Event Parameters. */
+ ble_gattc_evt_rel_disc_rsp_t rel_disc_rsp; /**< Relationship Discovery Response Event Parameters. */
+ ble_gattc_evt_char_disc_rsp_t char_disc_rsp; /**< Characteristic Discovery Response Event Parameters. */
+ ble_gattc_evt_desc_disc_rsp_t desc_disc_rsp; /**< Descriptor Discovery Response Event Parameters. */
+ ble_gattc_evt_char_val_by_uuid_read_rsp_t char_val_by_uuid_read_rsp; /**< Characteristic Value Read by UUID Response Event Parameters. */
+ ble_gattc_evt_read_rsp_t read_rsp; /**< Read Response Event Parameters. */
+ ble_gattc_evt_char_vals_read_rsp_t char_vals_read_rsp; /**< Characteristic Values Read Response Event Parameters. */
+ ble_gattc_evt_write_rsp_t write_rsp; /**< Write Response Event Parameters. */
+ ble_gattc_evt_hvx_t hvx; /**< Handle Value Notification/Indication Event Parameters. */
+ ble_gattc_evt_timeout_t timeout; /**< Timeout Event Parameters. */
+ } params; /**< Event Parameters. @note Only valid if @ref gatt_status == BLE_GATT_STATUS_SUCCESS. */
+} ble_gattc_evt_t;
+
+
+/**@brief Initiate or continue a GATT Primary Service Discovery procedure.
+ *
+ * @details This function initiates a Primary Service discovery, starting from the supplied handle.
+ * If the last service has not been reached, this must be called again with an updated start handle value to continue the search.
+ *
+ * @note If any of the discovered services have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with
+ * type BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] start_handle Handle to start searching from.
+ * @param[in] p_srvc_uuid Pointer to the service UUID to be found. If it is NULL, all primary services will be returned.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Primary Service Discovery procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER, uint32_t, sd_ble_gattc_primary_services_discover(uint16_t conn_handle, uint16_t start_handle, ble_uuid_t const * const p_srvc_uuid));
+
+
+/**@brief Initiate or continue a GATT Relationship Discovery procedure.
+ *
+ * @details This function initiates the Find Included Services sub-procedure. If the last included service has not been reached,
+ * this must be called again with an updated handle range to continue the search.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Relationship Discovery procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, uint32_t, sd_ble_gattc_relationships_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * const p_handle_range));
+
+
+/**@brief Initiate or continue a GATT Characteristic Discovery procedure.
+ *
+ * @details This function initiates a Characteristic discovery procedure. If the last Characteristic has not been reached,
+ * this must be called again with an updated handle range to continue the discovery.
+ *
+ * @note If any of the discovered characteristics have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with
+ * type BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Characteristic Discovery procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, uint32_t, sd_ble_gattc_characteristics_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * const p_handle_range));
+
+
+/**@brief Initiate or continue a GATT Characteristic Descriptor Discovery procedure.
+ *
+ * @details This function initiates the Characteristic Descriptor discovery procedure. If the last Descriptor has not been reached,
+ * this must be called again with an updated handle range to continue the discovery.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_handle_range A pointer to the range of handles of the Characteristic to perform this procedure on.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Descriptor Discovery procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_DESCRIPTORS_DISCOVER, uint32_t, sd_ble_gattc_descriptors_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * const p_handle_range));
+
+
+/**@brief Initiate or continue a GATT Read using Characteristic UUID procedure.
+ *
+ * @details This function initiates the Read using Characteristic UUID procedure. If the last Characteristic has not been reached,
+ * this must be called again with an updated handle range to continue the discovery.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_uuid Pointer to a Characteristic value UUID to read.
+ * @param[in] p_handle_range A pointer to the range of handles to perform this procedure on.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Read using Characteristic UUID procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, uint32_t, sd_ble_gattc_char_value_by_uuid_read(uint16_t conn_handle, ble_uuid_t const * const p_uuid, ble_gattc_handle_range_t const * const p_handle_range));
+
+
+/**@brief Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure.
+ *
+ * @details This function initiates a GATT Read (Long) Characteristic or Descriptor procedure. If the Characteristic or Descriptor
+ * to be read is longer than GATT_MTU - 1, this function must be called multiple times with appropriate offset to read the
+ * complete value.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] handle The handle of the attribute to be read.
+ * @param[in] offset Offset into the attribute value to be read.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Read (Long) procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_READ, uint32_t, sd_ble_gattc_read(uint16_t conn_handle, uint16_t handle, uint16_t offset));
+
+
+/**@brief Initiate a GATT Read Multiple Characteristic Values procedure.
+ *
+ * @details This function initiates a GATT Read Multiple Characteristic Values procedure.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_handles A pointer to the handle(s) of the attribute(s) to be read.
+ * @param[in] handle_count The number of handles in p_handles.
+ *
+ * @return @ref NRF_SUCCESS Successfully started the Read Multiple Characteristic Values procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_CHAR_VALUES_READ, uint32_t, sd_ble_gattc_char_values_read(uint16_t conn_handle, uint16_t const * const p_handles, uint16_t handle_count));
+
+
+/**@brief Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure.
+ *
+ * @details This function can perform all write procedures described in GATT.
+ *
+ * @note It is important to note that a write without response will <b>consume an application buffer</b>, and will therefore
+ * generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted. A write on the other hand will use the
+ * standard client internal buffer and thus will only generate a @ref BLE_GATTC_EVT_WRITE_RSP event as soon as the write response
+ * has been received from the peer. Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_write_params A pointer to a write parameters structure.
+ *
+ * @return @ref NRF_SUCCESS Successfully started the Write procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
+ * @return @ref NRF_ERROR_BUSY Procedure already in progress.
+ * @return @ref BLE_ERROR_NO_TX_BUFFERS There are no available buffers left.
+ */
+SVCALL(SD_BLE_GATTC_WRITE, uint32_t, sd_ble_gattc_write(uint16_t conn_handle, ble_gattc_write_params_t const * const p_write_params));
+
+
+/**@brief Send a Handle Value Confirmation to the GATT Server.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] handle The handle of the attribute in the indication.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued the Handle Value Confirmation for transmission.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_STATE No Indication pending to be confirmed.
+ * @return @ref BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle.
+ * @return @ref BLE_ERROR_NO_TX_BUFFERS There are no available buffers left.
+ */
+SVCALL(SD_BLE_GATTC_HV_CONFIRM, uint32_t, sd_ble_gattc_hv_confirm(uint16_t conn_handle, uint16_t handle));
+
+
+#endif /* BLE_GATTC_H__ */
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_gatts.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_gatts.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,548 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_GATTS Generic Attribute Profile (GATT) Server
+ @{
+ @brief Definitions and prototypes for the GATTS interface.
+ */
+
+#ifndef BLE_GATTS_H__
+#define BLE_GATTS_H__
+
+#include "nordic_global.h"
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "ble_l2cap.h"
+#include "ble_gap.h"
+#include "ble_gatt.h"
+#include "nrf_svc.h"
+
+
+/**
+ * @brief GATTS API SVC numbers.
+ */
+enum BLE_GATTS_SVCS
+{
+ SD_BLE_GATTS_SERVICE_ADD = BLE_GATTS_SVC_BASE, /**< Add a service. */
+ SD_BLE_GATTS_INCLUDE_ADD, /**< Add an included service. */
+ SD_BLE_GATTS_CHARACTERISTIC_ADD, /**< Add a characteristic. */
+ SD_BLE_GATTS_DESCRIPTOR_ADD, /**< Add a generic attribute. */
+ SD_BLE_GATTS_VALUE_SET, /**< Set an attribute value. */
+ SD_BLE_GATTS_VALUE_GET, /**< Get an attribute value. */
+ SD_BLE_GATTS_HVX, /**< Handle Value Notification or Indication. */
+ SD_BLE_GATTS_SERVICE_CHANGED, /**< Perform a Service Changed Indication to one or more peers. */
+ SD_BLE_GATTS_RW_AUTHORIZE_REPLY, /**< Reply to an authorization request for a read or write operation on one or more attributes. */
+ SD_BLE_GATTS_SYS_ATTR_SET, /**< Set the persistent system attributes for a connection. */
+ SD_BLE_GATTS_SYS_ATTR_GET, /**< Get updated persistent system attributes after terminating a connection. */
+};
+
+
+/** @addtogroup BLE_GATTS_DEFINES Defines
+ * @{ */
+
+/** @brief Only the default MTU size of 23 is currently supported. */
+#define GATT_RX_MTU 23
+
+/** @defgroup BLE_ERRORS_GATTS SVC return values specific to GATTS
+ * @{ */
+#define BLE_ERROR_GATTS_INVALID_ATTR_TYPE (NRF_GATTS_ERR_BASE + 0x000) /**< Invalid attribute type. */
+#define BLE_ERROR_GATTS_SYS_ATTR_MISSING (NRF_GATTS_ERR_BASE + 0x001) /**< System Attributes missing. */
+/** @} */
+
+/** @defgroup BLE_GATTS_ATTR_LENS_MAX Maximum attribute lengths
+ * @{ */
+#define BLE_GATTS_FIX_ATTR_LEN_MAX (510) /**< Maximum length for fixed length Attribute Values. */
+#define BLE_GATTS_VAR_ATTR_LEN_MAX (512) /**< Maximum length for variable length Attribute Values. */
+/** @} */
+
+/** @defgroup BLE_GATTS_SRVC_TYPES GATT Server Service Types
+ * @{ */
+#define BLE_GATTS_SRVC_TYPE_INVALID 0x00 /**< Invalid Service Type. */
+#define BLE_GATTS_SRVC_TYPE_PRIMARY 0x01 /**< Primary Service. */
+#define BLE_GATTS_SRVC_TYPE_SECONDARY 0x02 /**< Secondary Type. */
+/** @} */
+
+
+/** @defgroup BLE_GATTS_ATTR_TYPES GATT Server Attribute Types
+ * @{ */
+#define BLE_GATTS_ATTR_TYPE_INVALID 0x00 /**< Invalid Attribute Type. */
+#define BLE_GATTS_ATTR_TYPE_PRIM_SRVC_DECL 0x01 /**< Primary Service Declaration. */
+#define BLE_GATTS_ATTR_TYPE_SEC_SRVC_DECL 0x02 /**< Secondary Service Declaration. */
+#define BLE_GATTS_ATTR_TYPE_INC_DECL 0x03 /**< Include Declaration. */
+#define BLE_GATTS_ATTR_TYPE_CHAR_DECL 0x04 /**< Characteristic Declaration. */
+#define BLE_GATTS_ATTR_TYPE_CHAR_VAL 0x05 /**< Characteristic Value. */
+#define BLE_GATTS_ATTR_TYPE_DESC 0x06 /**< Descriptor. */
+#define BLE_GATTS_ATTR_TYPE_OTHER 0x07 /**< Other, non-GATT specific type. */
+/** @} */
+
+
+/** @defgroup BLE_GATTS_OPS GATT Server Operations
+ * @{ */
+#define BLE_GATTS_OP_INVALID 0x00 /**< Invalid Operation. */
+#define BLE_GATTS_OP_WRITE_REQ 0x01 /**< Write Request. */
+#define BLE_GATTS_OP_WRITE_CMD 0x02 /**< Write Command. */
+#define BLE_GATTS_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */
+#define BLE_GATTS_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */
+#define BLE_GATTS_OP_EXEC_WRITE_REQ_CANCEL 0x05 /**< Execute Write Request: Cancel all prepared writes. */
+#define BLE_GATTS_OP_EXEC_WRITE_REQ_NOW 0x06 /**< Execute Write Request: Immediately execute all prepared writes. */
+/** @} */
+
+/** @defgroup BLE_GATTS_VLOCS GATT Value Locations
+ * @{ */
+#define BLE_GATTS_VLOC_INVALID 0x00 /**< Invalid Location. */
+#define BLE_GATTS_VLOC_STACK 0x01 /**< Attribute Value is located in stack memory, no user memory is required. */
+#define BLE_GATTS_VLOC_USER 0x02 /**< Attribute Value is located in user memory. This requires the user to maintain a valid buffer through the lifetime of the attribute, since the stack
+ will read and write directly to the memory using the pointer provided in the APIs. There are no alignment requirements for the buffer. */
+/** @} */
+
+/** @defgroup BLE_GATTS_AUTHORIZE_TYPES GATT Server Authorization Types
+ * @{ */
+#define BLE_GATTS_AUTHORIZE_TYPE_INVALID 0x00 /**< Invalid Type. */
+#define BLE_GATTS_AUTHORIZE_TYPE_READ 0x01 /**< Authorize a Read Operation. */
+#define BLE_GATTS_AUTHORIZE_TYPE_WRITE 0x02 /**< Authorize a Write Request Operation. */
+/** @} */
+
+
+/** @} */
+
+/**@brief Attribute metadata. */
+typedef struct
+{
+ ble_gap_conn_sec_mode_t read_perm; /**< Read permissions. */
+ ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */
+ uint8_t vlen :1; /**< Variable length attribute. */
+ uint8_t vloc :2; /**< Value location, see @ref BLE_GATTS_VLOCS.*/
+ uint8_t rd_auth :1; /**< Read Authorization and value will be requested from the application on every read operation. */
+ uint8_t wr_auth :1; /**< Write Authorization will be requested from the application on every Write Request operation (but not Write Command). */
+} ble_gatts_attr_md_t;
+
+
+/**@brief GATT Attribute. */
+typedef struct
+{
+ ble_uuid_t* p_uuid; /**< Pointer to the attribute UUID. */
+ ble_gatts_attr_md_t* p_attr_md; /**< Pointer to the attribute metadata structure. */
+ uint16_t init_len; /**< Initial attribute value length in bytes. */
+ uint16_t init_offs; /**< Initial attribute value offset in bytes. If different from zero, the first init_offs bytes of the attribute value will be left uninitialized. */
+ uint16_t max_len; /**< Maximum attribute value length in bytes, see @ref BLE_GATTS_ATTR_LENS_MAX for maximum values. */
+ uint8_t* p_value; /**< Pointer to the attribute data. Please note that if the @ref BLE_GATTS_VLOC_USER value location is selected in the attribute metadata, this will have to point to a buffer
+ that remains valid through the lifetime of the attribute. This excludes usage of automatic variables that may go out of scope or any other temporary location.
+ The stack may access that memory directly without the application's knowledge. */
+} ble_gatts_attr_t;
+
+
+/**@brief GATT Attribute Context. */
+typedef struct
+{
+ ble_uuid_t srvc_uuid; /**< Service UUID. */
+ ble_uuid_t char_uuid; /**< Characteristic UUID if applicable (BLE_UUID_TYPE_UNKNOWN if N/A). */
+ ble_uuid_t desc_uuid; /**< Descriptor UUID if applicable (BLE_UUID_TYPE_UNKNOWN if N/A). */
+ uint16_t srvc_handle; /**< Service Handle. */
+ uint16_t value_handle; /**< Characteristic Handle if applicable (BLE_GATT_HANDLE_INVALID if N/A). */
+ uint8_t type; /**< Attribute Type, see @ref BLE_GATTS_ATTR_TYPES. */
+} ble_gatts_attr_context_t;
+
+
+/**@brief GATT Characteristic Presentation Format. */
+typedef struct
+{
+ uint8_t format; /**< Format of the value, see @ref BLE_GATT_CPF_FORMATS. */
+ int8_t exponent; /**< Exponent for integer data types. */
+ uint16_t unit; /**< UUID from Bluetooth Assigned Numbers. */
+ uint8_t name_space; /**< Namespace from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */
+ uint16_t desc; /**< Namespace description from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */
+} ble_gatts_char_pf_t;
+
+
+/**@brief GATT Characteristic metadata. */
+typedef struct
+{
+ ble_gatt_char_props_t char_props; /**< Characteristic Properties. */
+ ble_gatt_char_ext_props_t char_ext_props; /**< Characteristic Extended Properties. */
+ uint8_t* p_char_user_desc; /**< Pointer to a UTF-8, NULL if the descriptor is not required. */
+ uint16_t char_user_desc_max_size; /**< The maximum size in bytes of the user description descriptor. */
+ uint16_t char_user_desc_size; /**< The size of the user description, must be smaller or equal to char_user_desc_max_size. */
+ ble_gatts_char_pf_t* p_char_pf; /**< Pointer to a presentation format structure or NULL if the descriptor is not required. */
+ ble_gatts_attr_md_t* p_user_desc_md; /**< Attribute metadata for the User Description descriptor, or NULL for default values. */
+ ble_gatts_attr_md_t* p_cccd_md; /**< Attribute metadata for the Client Characteristic Configuration Descriptor, or NULL for default values. */
+ ble_gatts_attr_md_t* p_sccd_md; /**< Attribute metadata for the Server Characteristic Configuration Descriptor, or NULL for default values. */
+} ble_gatts_char_md_t;
+
+
+/**@brief GATT Characteristic Definition Handles. */
+typedef struct
+{
+ uint16_t value_handle; /**< Handle to the characteristic value. */
+ uint16_t user_desc_handle; /**< Handle to the User Description descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
+ uint16_t cccd_handle; /**< Handle to the Client Characteristic Configuration Descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
+ uint16_t sccd_handle; /**< Handle to the Server Characteristic Configuration Descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
+} ble_gatts_char_handles_t;
+
+
+/**@brief GATT HVx parameters. */
+typedef struct
+{
+ uint16_t handle; /**< Characteristic Value Handle. */
+ uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */
+ uint16_t offset; /**< Offset within the attribute value. */
+ uint16_t* p_len; /**< Length in bytes to be written, length in bytes written after successful return. */
+ uint8_t* p_data; /**< Actual data content, use NULL to use the current attribute value. */
+} ble_gatts_hvx_params_t;
+
+/**@brief GATT Read Authorization parameters. */
+typedef struct
+{
+ uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
+ uint8_t update : 1; /**< If set, data supplied in p_data will be used in the ATT response. */
+ uint16_t offset; /**< Offset of the attribute value being updated. */
+ uint16_t len; /**< Length in bytes of the value in p_data pointer, see @ref BLE_GATTS_ATTR_LENS_MAX. */
+ uint8_t* p_data; /**< Pointer to new value used to update the attribute value. */
+} ble_gatts_read_authorize_params_t;
+
+/**@brief GATT Write Authorisation parameters. */
+typedef struct
+{
+ uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
+} ble_gatts_write_authorize_params_t;
+
+/**@brief GATT Read or Write Authorize Reply parameters. */
+typedef struct
+{
+ uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */
+ union {
+ ble_gatts_read_authorize_params_t read; /**< Read authorization parameters. */
+ ble_gatts_write_authorize_params_t write; /**< Write authorization parameters. */
+ } params;
+} ble_gatts_rw_authorize_reply_params_t;
+
+
+/**
+ * @brief GATT Server Event IDs.
+ */
+enum BLE_GATTS_EVTS
+{
+ BLE_GATTS_EVT_WRITE = BLE_GATTS_EVT_BASE, /**< Write operation performed. */
+ BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST, /**< Read/Write Authorization request. */
+ BLE_GATTS_EVT_SYS_ATTR_MISSING, /**< A persistent system attribute access is pending, awaiting a sd_ble_gatts_sys_attr_set(). */
+ BLE_GATTS_EVT_HVC, /**< Handle Value Confirmation. */
+ BLE_GATTS_EVT_SC_CONFIRM, /**< Service Changed Confirmation. */
+ BLE_GATTS_EVT_TIMEOUT /**< Timeout. */
+};
+
+
+/**@brief Event structure for BLE_GATTS_EVT_WRITE. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ uint8_t op; /**< Type of write operation, see @ref BLE_GATTS_OPS. */
+ ble_gatts_attr_context_t context; /**< Attribute Context. */
+ uint16_t offset; /**< Offset for the write operation. */
+ uint16_t len; /**< Length of the incoming data. */
+ uint8_t data[1]; /**< Incoming data, variable length. */
+} ble_gatts_evt_write_t;
+
+/**@brief Event structure for authorize read request. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ ble_gatts_attr_context_t context; /**< Attribute Context. */
+ uint16_t offset; /**< Offset for the read operation. */
+} ble_gatts_evt_read_t;
+
+/**@brief Event structure for BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST. */
+typedef struct
+{
+ uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */
+ union {
+ ble_gatts_evt_read_t read; /**< Attribute Read Parameters. */
+ ble_gatts_evt_write_t write; /**< Attribute Write Parameters. */
+ } request;
+} ble_gatts_evt_rw_authorize_request_t;
+
+/**@brief Event structure for BLE_GATTS_EVT_SYS_ATTR_MISSING. */
+typedef struct
+{
+ uint8_t hint;
+} ble_gatts_evt_sys_attr_missing_t;
+
+
+/**@brief Event structure for BLE_GATTS_EVT_HVC. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+} ble_gatts_evt_hvc_t;
+
+/**@brief Event structure for BLE_GATTS_EVT_TIMEOUT. */
+typedef struct
+{
+ uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */
+} ble_gatts_evt_timeout_t;
+
+
+/**@brief GATT Server event callback event structure. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which event occurred. */
+ union
+ {
+ ble_gatts_evt_write_t write; /**< Write Event Parameters. */
+ ble_gatts_evt_rw_authorize_request_t authorize_request; /**< Read or Write Authorize Request Parameters. */
+ ble_gatts_evt_sys_attr_missing_t sys_attr_missing; /**< System attributes missing. */
+ ble_gatts_evt_hvc_t hvc; /**< Handle Value Confirmation Event Parameters. */
+ ble_gatts_evt_timeout_t timeout; /**< Timeout Event. */
+ } params;
+} ble_gatts_evt_t;
+
+
+/**@brief Add a service declaration to the local server ATT table.
+ *
+ * @param[in] type Toggles between primary and secondary services, see @ref BLE_GATTS_SRVC_TYPES.
+ * @param[in] p_uuid Pointer to service UUID.
+ * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored.
+ *
+ * @note Secondary Services are only relevant in the context of the entity that references them, it is therefore forbidden to
+ * add a secondary service declaration that is not referenced by another service later in the ATT table.
+ *
+ * @return @ref NRF_SUCCESS Successfully added a service declaration.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, Vendor Specific UUIDs need to be present in the table.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_GATTS_SERVICE_ADD, uint32_t, sd_ble_gatts_service_add(uint8_t type, ble_uuid_t const*const p_uuid, uint16_t *const p_handle));
+
+
+/**@brief Add an include declaration to the local server ATT table.
+ *
+ * @note It is currently only possible to add an include declaration to the last added service (i.e. only sequential addition is supported at this time).
+ *
+ * @note The included service must already be present in the ATT table prior to this call.
+ *
+ * @param[in] service_handle Handle of the service where the included service is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
+ * @param[in] inc_srvc_handle Handle of the included service.
+ * @param[out] p_include_handle Pointer to a 16-bit word where the assigned handle will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully added an include declaration.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, handle values need to match previously added services.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, self inclusions are not allowed.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
+ */
+SVCALL(SD_BLE_GATTS_INCLUDE_ADD, uint32_t, sd_ble_gatts_include_add(uint16_t service_handle, uint16_t inc_srvc_handle, uint16_t *const p_include_handle));
+
+
+/**@brief Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the local server ATT table.
+ *
+ * @note It is currently only possible to add a characteristic to the last added service (i.e. only sequential addition is supported at this time).
+ *
+ * @note Several restrictions apply to the parameters, such as matching permissions between the user description descriptor and the writeable auxiliaries bits,
+ * readable (no security) and writeable (selectable) CCCDs and SCCDs and valid presentation format values.
+ *
+ * @note If no metadata is provided for the optional descriptors, their permissions will be derived from the characteristic permissions.
+ *
+ * @param[in] service_handle Handle of the service where the characteristic is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
+ * @param[in] p_char_md Characteristic metadata.
+ * @param[in] p_attr_char_value Pointer to the attribute structure corresponding to the characteristic value.
+ * @param[out] p_handles Pointer to the structure where the assigned handles will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully added a characteristic.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, service handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
+ */
+SVCALL(SD_BLE_GATTS_CHARACTERISTIC_ADD, uint32_t, sd_ble_gatts_characteristic_add(uint16_t service_handle, ble_gatts_char_md_t const*const p_char_md, ble_gatts_attr_t const*const p_attr_char_value, ble_gatts_char_handles_t *const p_handles));
+
+
+/**@brief Add a descriptor to the local server ATT table.
+ *
+ * @note It is currently only possible to add a descriptor to the last added characteristic (i.e. only sequential addition is supported at this time).
+ *
+ * @param[in] char_handle Handle of the characteristic where the descriptor is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
+ * @param[in] p_attr Pointer to the attribute structure.
+ * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully added a descriptor.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, characteristic handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, a characteristic context is required.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
+ */
+SVCALL(SD_BLE_GATTS_DESCRIPTOR_ADD, uint32_t, sd_ble_gatts_descriptor_add(uint16_t char_handle, ble_gatts_attr_t const * const p_attr, uint16_t* const p_handle));
+
+/**@brief Set the value of a given attribute.
+ *
+ * @param[in] handle Attribute handle.
+ * @param[in] offset Offset in bytes to write from.
+ * @param[in,out] p_len Length in bytes to be written, length in bytes written after successful return.
+ * @param[in] p_value Pointer to a buffer (at least len bytes long) containing the desired attribute value.
+ *
+ * @return @ref NRF_SUCCESS Successfully set the value of the attribute.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden handle supplied, certain attributes are not modifiable by the application.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
+ */
+SVCALL(SD_BLE_GATTS_VALUE_SET, uint32_t, sd_ble_gatts_value_set(uint16_t handle, uint16_t offset, uint16_t* const p_len, uint8_t const * const p_value));
+
+/**@brief Get the value of a given attribute.
+ *
+ * @param[in] handle Attribute handle.
+ * @param[in] offset Offset in bytes to read from.
+ * @param[in,out] p_len Length in bytes to be read, total length of attribute value (in bytes, starting from offset) after successful return.
+ * @param[in,out] p_data Pointer to a buffer (at least len bytes long) where to store the attribute value. Set to NULL to obtain the complete length of attribute value.
+ *
+ * @note If the attribute value is longer than the size of the supplied buffer,
+ * p_len will return the total attribute value length (excluding offset),
+ * and not the number of bytes actually returned in p_data.
+ * The application may use this information to allocate a suitable buffer size.
+ *
+ * @return @ref NRF_SUCCESS Successfully retrieved the value of the attribute.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
+ */
+SVCALL(SD_BLE_GATTS_VALUE_GET, uint32_t, sd_ble_gatts_value_get(uint16_t handle, uint16_t offset, uint16_t *const p_len, uint8_t* const p_data));
+
+/**@brief Notify or Indicate an attribute value.
+ *
+ * @details This function checks for the relevant Client Characteristic Configuration descriptor value to verify that the relevant operation
+ * (notification or indication) has been enabled by the client. It is also able to update the attribute value before issuing the PDU, so that
+ * the application can atomically perform a value update and a server initiated transaction with a single API call.
+ * If the application chooses to indicate an attribute value, a @ref BLE_GATTS_EVT_HVC will be sent up as soon as the confirmation arrives from
+ * the peer.
+ *
+ * @note The local attribute value may be updated even if an outgoing packet is not sent to the peer due to an error during execution.
+ * When receiveing the error codes @ref NRF_ERROR_INVALID_STATE, @ref NRF_ERROR_BUSY, @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING and
+ * @ref BLE_ERROR_NO_TX_BUFFERS the ATT table has been updated.
+ * The caller can check whether the value has been updated by looking at the contents of *(p_hvx_params->p_len).
+ *
+ * @note It is important to note that a notification will <b>consume an application buffer</b>, and will therefore
+ * generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted. An indication on the other hand will use the
+ * standard server internal buffer and thus will only generate a @ref BLE_GATTS_EVT_HVC event as soon as the confirmation
+ * has been received from the peer. Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_hvx_params Pointer to an HVx parameters structure. If the p_data member contains a non-NULL pointer the attribute value will be updated with
+ * the contents pointed by it before sending the notification or indication.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued a notification or indication for transmission, and optionally updated the attribute value.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied. Only attributes added directly by the application are available to notify and indicate.
+ * @return @ref BLE_ERROR_GATTS_INVALID_ATTR_TYPE Invalid attribute type(s) supplied, only characteristic values may be notified and indicated.
+ * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, notifications or indications must be enabled in the CCCD.
+ * @return @ref NRF_ERROR_BUSY Procedure already in progress.
+ * @return @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value.
+ * @return @ref BLE_ERROR_NO_TX_BUFFERS There are no available buffers to send the data, applies only to notifications.
+ */
+SVCALL(SD_BLE_GATTS_HVX, uint32_t, sd_ble_gatts_hvx(uint16_t conn_handle, ble_gatts_hvx_params_t const*const p_hvx_params));
+
+/**@brief Indicate the Service Changed attribute value.
+ *
+ * @details This call will send a Handle Value Indication to one or more peers connected to inform them that the attribute
+ * table layout has changed. As soon as the peer has confirmed the indication, a @ref BLE_GATTS_EVT_SC_CONFIRM event will
+ * be issued.
+ *
+ * @note Some of the restrictions and limitations that apply to @ref sd_ble_gatts_hvx also apply here.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] start_handle Start of affected attribute handle range.
+ * @param[in] end_handle End of affected attribute handle range.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued the Service Changed indication for transmission.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied, handles must be in the range populated by the application.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, notifications or indications must be enabled in the CCCD.
+ * @return @ref NRF_ERROR_BUSY Procedure already in progress.
+ * @return @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value.
+ */
+SVCALL(SD_BLE_GATTS_SERVICE_CHANGED, uint32_t, sd_ble_gatts_service_changed(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle));
+
+/**@brief Respond to a Read/Write authorization request.
+ *
+ * @note This call should only be used as a response to a @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST event issued to the application.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_rw_authorize_reply_params Pointer to a structure with the attribute provided by the application.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued a response to the peer, and in the case of a write operation, ATT table updated.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_STATE No authorization request pending.
+ * @return @ref NRF_ERROR_INVALID_PARAM Authorization op invalid,
+ * or for Read Authorization reply: requested handles not replied with,
+ * or for Write Authorization reply: handle supplied does not match requested handle.
+ */
+SVCALL(SD_BLE_GATTS_RW_AUTHORIZE_REPLY, uint32_t, sd_ble_gatts_rw_authorize_reply(uint16_t conn_handle, ble_gatts_rw_authorize_reply_params_t const*const p_rw_authorize_reply_params));
+
+
+/**@brief Update persistent system attribute information.
+ *
+ * @details Supply to the stack information about persistent system attributes.
+ * This call is legal in the connected state only, and is usually
+ * made immediately after a connection is established and the bond identified.
+ * usually as a response to a BLE_GATTS_EVT_SYS_ATTR_MISSING.
+ *
+ * p_sysattrs may point directly to the application's stored copy of the struct.
+ * If the pointer is NULL, the system attribute info is initialized, assuming that
+ * the application does not have any previously saved data for this bond.
+ *
+ * @note The state of persistent system attributes is reset upon connection and then remembered for its duration.
+ *
+ * @note If this call returns with an error code different from @ref NRF_SUCCESS, the storage of persistent system attributes may have been completed only partially.
+ * This means that the state of the attribute table is undefined, and the application should either provide a new set of attributes using this same call or
+ * reset the SoftDevice to return to a known state.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_sys_attr_data Pointer to a saved copy of system attributes supplied to the stack, or NULL.
+ * @param[in] len Size of data pointed by p_sys_attr_data, in octets.
+ *
+ * @return @ref NRF_SUCCESS Successfully set the system attribute information.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_DATA Invalid data supplied, the data should be exactly the same as retrieved with @ref sd_ble_gatts_sys_attr_get.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_GATTS_SYS_ATTR_SET, uint32_t, sd_ble_gatts_sys_attr_set(uint16_t conn_handle, uint8_t const*const p_sys_attr_data, uint16_t len));
+
+
+/**@brief Retrieve persistent system attribute information from the stack.
+ *
+ * @details This call is used to retrieve information about values to be stored perisistently by the application
+ * after a connection has been terminated. When a new connection is made to the same bond, the values
+ * should be restored using @ref sd_ble_gatts_sys_attr_set.
+ * The data should be read before any new advertising is started, or any new connection established. The connection handle for
+ * the previous now defunct connection will remain valid until a new one is created to allow this API call to refer to it.
+ *
+ * @param[in] conn_handle Connection handle of the recently terminated connection.
+ * @param[in] p_sys_attr_data Pointer to a buffer where updated information about system attributes will be filled in. NULL can be provided to
+ * obtain the length of the data
+ * @param[in,out] p_len Size of application buffer if p_sys_attr_data is not NULL. Unconditially updated to actual length of system attribute data.
+ *
+ * @return @ref NRF_SUCCESS Successfully retrieved the system attribute information.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_DATA_SIZE The system attribute information did not fit into the provided buffer.
+ */
+SVCALL(SD_BLE_GATTS_SYS_ATTR_GET, uint32_t, sd_ble_gatts_sys_attr_get(uint16_t conn_handle, uint8_t * const p_sys_attr_data, uint16_t* const p_len));
+
+
+#endif // BLE_GATTS_H__
+
+/**
+ @}
+*/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_hci.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_hci.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,96 @@
+/*
+ Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+
+ The information contained herein is confidential property of Nordic Semiconductor. The use,
+ copying, transfer or disclosure of such information is prohibited except by express written
+ agreement with Nordic Semiconductor.
+ */
+/**
+ @addtogroup BLE_COMMON
+ @{
+*/
+
+
+#ifndef BLE_HCI_H__
+#define BLE_HCI_H__
+
+/** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes
+ * @{ */
+
+#define BLE_HCI_STATUS_CODE_SUCCESS 0x00
+#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND 0x01
+#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER 0x02
+/*0x03 Hardware Failure
+0x04 Page Timeout
+*/
+#define BLE_HCI_AUTHENTICATION_FAILURE 0x05
+#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING 0x06
+#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED 0x07
+#define BLE_HCI_CONNECTION_TIMEOUT 0x08
+/*0x09 Connection Limit Exceeded
+0x0A Synchronous Connection Limit To A Device Exceeded
+0x0B ACL Connection Already Exists*/
+#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED 0x0C
+/*0x0D Connection Rejected due to Limited Resources
+0x0E Connection Rejected Due To Security Reasons
+0x0F Connection Rejected due to Unacceptable BD_ADDR
+0x10 Connection Accept Timeout Exceeded
+0x11 Unsupported Feature or Parameter Value*/
+#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12
+#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION 0x13
+#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14
+#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF 0x15
+#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION 0x16
+/*
+0x17 Repeated Attempts
+0x18 Pairing Not Allowed
+0x19 Unknown LMP PDU
+*/
+#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A
+/*
+0x1B SCO Offset Rejected
+0x1C SCO Interval Rejected
+0x1D SCO Air Mode Rejected*/
+#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS 0x1E
+#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR 0x1F
+/*0x20 Unsupported LMP Parameter Value
+0x21 Role Change Not Allowed
+*/
+#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT 0x22
+/*0x23 LMP Error Transaction Collision*/
+#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED 0x24
+/*0x25 Encryption Mode Not Acceptable
+0x26 Link Key Can Not be Changed
+0x27 Requested QoS Not Supported
+*/
+#define BLE_HCI_INSTANT_PASSED 0x28
+#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED 0x29
+#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION 0x2A
+/*
+0x2B Reserved
+0x2C QoS Unacceptable Parameter
+0x2D QoS Rejected
+0x2E Channel Classification Not Supported
+0x2F Insufficient Security
+0x30 Parameter Out Of Mandatory Range
+0x31 Reserved
+0x32 Role Switch Pending
+0x33 Reserved
+0x34 Reserved Slot Violation
+0x35 Role Switch Failed
+0x36 Extended Inquiry Response Too Large
+0x37 Secure Simple Pairing Not Supported By Host.
+0x38 Host Busy - Pairing
+0x39 Connection Rejected due to No Suitable Channel Found*/
+#define BLE_HCI_CONTROLLER_BUSY 0x3A
+#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE 0x3B
+#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT 0x3C
+#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE 0x3D
+#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED 0x3E
+
+/** @} */
+
+
+#endif // BLE_HCI_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_l2cap.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_l2cap.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,136 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_L2CAP Logical Link Control and Adaptation Protocol (L2CAP)
+ @{
+ @brief Definitions and prototypes for the L2CAP interface.
+ */
+
+#ifndef BLE_L2CAP_H__
+#define BLE_L2CAP_H__
+
+#include "nordic_global.h"
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "ble_err.h"
+#include "nrf_svc.h"
+
+/**@brief L2CAP API SVC numbers. */
+enum BLE_L2CAP_SVCS
+{
+ SD_BLE_L2CAP_CID_REGISTER = BLE_L2CAP_SVC_BASE, /**< Register a CID. */
+ SD_BLE_L2CAP_CID_UNREGISTER, /**< Unregister a CID. */
+ SD_BLE_L2CAP_TX /**< Transmit a packet. */
+};
+
+/**@addtogroup BLE_L2CAP_DEFINES Defines
+ * @{ */
+
+/**@defgroup BLE_ERRORS_L2CAP SVC return values specific to L2CAP
+ * @{ */
+#define BLE_ERROR_L2CAP_CID_IN_USE (NRF_L2CAP_ERR_BASE + 0x000) /**< CID already in use. */
+/** @} */
+
+/**@brief Default L2CAP MTU. */
+#define BLE_L2CAP_MTU_DEF (23)
+
+/**@brief Invalid Channel Identifier. */
+#define BLE_L2CAP_CID_INVALID (0x0000)
+
+/**@brief Dynamic Channel Identifier base. */
+#define BLE_L2CAP_CID_DYN_BASE (0x0040)
+
+/**@brief Maximum amount of dynamic CIDs. */
+#define BLE_L2CAP_CID_DYN_MAX (8)
+
+/** @} */
+
+/**@brief Packet header format for L2CAP transmission. */
+typedef struct
+{
+ uint16_t len; /**< Length of valid info in data member. */
+ uint16_t cid; /**< Channel ID on which packet is transmitted. */
+} ble_l2cap_header_t;
+
+/**@brief L2CAP Event IDs. */
+enum BLE_L2CAP_EVTS
+{
+ BLE_L2CAP_EVT_RX = BLE_L2CAP_EVT_BASE /**< L2CAP packet received. */
+};
+
+
+/**@brief L2CAP Received packet event report. */
+typedef struct
+{
+ ble_l2cap_header_t header; /** L2CAP packet header. */
+ uint8_t data[1]; /**< Packet data, variable length. */
+} ble_l2cap_evt_rx_t;
+
+
+/**@brief L2CAP event callback event structure. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which event occured. */
+ union
+ {
+ ble_l2cap_evt_rx_t rx; /**< RX Event parameters. */
+ } params;
+} ble_l2cap_evt_t;
+
+
+/**@brief Register a CID with L2CAP.
+ *
+ * @details This registers a higher protocol layer with the L2CAP multiplexer, and is requried prior to all operations on the CID.
+ *
+ * @param[in] cid L2CAP CID.
+ *
+ * @return @ref NRF_SUCCESS Successfully registered a CID with the L2CAP layer.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, CID must be above @ref BLE_L2CAP_CID_DYN_BASE.
+ * @return @ref BLE_ERROR_L2CAP_CID_IN_USE L2CAP CID already in use.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_L2CAP_CID_REGISTER, uint32_t, sd_ble_l2cap_cid_register(uint16_t cid));
+
+/**@brief Unregister a CID with L2CAP.
+ *
+ * @details This unregisters a previously registerd higher protocol layer with the L2CAP multiplexer.
+ *
+ * @param[in] cid L2CAP CID.
+ *
+ * @return @ref NRF_SUCCESS Successfully unregistered the CID.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_NOT_FOUND CID not previously registered.
+ */
+SVCALL(SD_BLE_L2CAP_CID_UNREGISTER, uint32_t, sd_ble_l2cap_cid_unregister(uint16_t cid));
+
+/**@brief Transmit an L2CAP packet.
+ *
+ * @note It is important to note that a call to this function will <b>consume an application buffer</b>, and will therefore
+ * generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted.
+ * Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details.
+ *
+ * @param[in] conn_handle Connection Handle.
+ * @param[in] p_header Pointer to a packet header containing length and CID.
+ * @param[in] p_data Pointer to the data to be transmitted.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued an L2CAP packet for transmission.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, CIDs must be registered beforehand with @ref sd_ble_l2cap_cid_register.
+ * @return @ref NRF_ERROR_NOT_FOUND CID not found.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @return @ref BLE_ERROR_NO_TX_BUFFERS Not enough application buffers available.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, see @ref BLE_L2CAP_MTU_DEF.
+ */
+SVCALL(SD_BLE_L2CAP_TX, uint32_t, sd_ble_l2cap_tx(uint16_t conn_handle, ble_l2cap_header_t const * const p_header, uint8_t const * const p_data));
+
+
+#endif // BLE_L2CAP_H__
+
+/**
+ @}
+*/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_ranges.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_ranges.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,72 @@
+/*
+ Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+
+ The information contained herein is confidential property of Nordic Semiconductor. The use,
+ copying, transfer or disclosure of such information is prohibited except by express written
+ agreement with Nordic Semiconductor.
+ */
+/**
+ @addtogroup BLE_COMMON
+ @{
+ @defgroup ble_ranges Module specific SVC and event number subranges
+ @{
+
+ @brief Definition of SVC and event number subranges for each API module.
+
+ @note
+ SVCs and event numbers are split into subranges for each API module.
+ Each module receives its entire allocated range of SVC calls, whether implemented or not,
+ but return BLE_ERROR_NOT_SUPPORTED for unimplemented or undefined calls in its range.
+
+ Note that the symbols BLE_<module>_SVC_LAST is the end of the allocated SVC range,
+ rather than the last SVC function call actually defined and implemented.
+
+ Specific SVC and event values are defined in each module's ble_<module>.h file,
+ which defines names of each individual SVC code based on the range start value.
+*/
+
+#ifndef BLE_RANGES_H__
+#define BLE_RANGES_H__
+
+#define BLE_SVC_BASE 0x60
+#define BLE_SVC_LAST 0x6B /* Total: 12. */
+
+#define BLE_RESERVED_SVC_BASE 0x6C
+#define BLE_RESERVED_SVC_LAST 0x6F /* Total: 4. */
+
+#define BLE_GAP_SVC_BASE 0x70
+#define BLE_GAP_SVC_LAST 0x8F /* Total: 32. */
+
+#define BLE_GATTC_SVC_BASE 0x90
+#define BLE_GATTC_SVC_LAST 0x9F /* Total: 16. */
+
+#define BLE_GATTS_SVC_BASE 0xA0
+#define BLE_GATTS_SVC_LAST 0xAF /* Total: 16. */
+
+#define BLE_L2CAP_SVC_BASE 0xB0
+#define BLE_L2CAP_SVC_LAST 0xBF /* Total: 16. */
+
+
+#define BLE_EVT_INVALID 0x00
+
+#define BLE_EVT_BASE 0x01
+#define BLE_EVT_LAST 0x0F /* Total: 15. */
+
+#define BLE_GAP_EVT_BASE 0x10
+#define BLE_GAP_EVT_LAST 0x2F /* Total: 32. */
+
+#define BLE_GATTC_EVT_BASE 0x30
+#define BLE_GATTC_EVT_LAST 0x4F /* Total: 32. */
+
+#define BLE_GATTS_EVT_BASE 0x50
+#define BLE_GATTS_EVT_LAST 0x6F /* Total: 32. */
+
+#define BLE_L2CAP_EVT_BASE 0x70
+#define BLE_L2CAP_EVT_LAST 0x8F /* Total: 32. */
+
+#endif /* BLE_RANGES_H__ */
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_types.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/ble_types.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,158 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_COMMON
+ @{
+ @defgroup ble_types Common types and macro definitions
+ @{
+
+ @brief Common types and macro definitions for the S110 SoftDevice.
+ */
+
+#ifndef BLE_TYPES_H__
+#define BLE_TYPES_H__
+
+#include <stdint.h>
+#include "nordic_global.h"
+
+/** @addtogroup BLE_COMMON_DEFINES Defines
+ * @{ */
+
+/** @defgroup BLE_CONN_HANDLES BLE Connection Handles
+ * @{ */
+#define BLE_CONN_HANDLE_INVALID 0xFFFF /**< Invalid Connection Handle. */
+#define BLE_CONN_HANDLE_ALL 0xFFFE /**< Applies to all Connection Handles. */
+/** @} */
+
+
+/** @defgroup BLE_UUID_VALUES Assigned Values for BLE UUIDs
+ * @{ */
+/* Generic UUIDs, applicable to all services */
+#define BLE_UUID_UNKNOWN 0x0000 /**< Reserved UUID. */
+#define BLE_UUID_SERVICE_PRIMARY 0x2800 /**< Primary Service. */
+#define BLE_UUID_SERVICE_SECONDARY 0x2801 /**< Secondary Service. */
+#define BLE_UUID_SERVICE_INCLUDE 0x2802 /**< Include. */
+#define BLE_UUID_CHARACTERISTIC 0x2803 /**< Characteristic. */
+#define BLE_UUID_DESCRIPTOR_CHAR_EXT_PROP 0x2900 /**< Characteristic Extended Properties Descriptor. */
+#define BLE_UUID_DESCRIPTOR_CHAR_USER_DESC 0x2901 /**< Characteristic User Description Descriptor. */
+#define BLE_UUID_DESCRIPTOR_CLIENT_CHAR_CONFIG 0x2902 /**< Client Characteristic Configuration Descriptor. */
+#define BLE_UUID_DESCRIPTOR_SERVER_CHAR_CONFIG 0x2903 /**< Server Characteristic Configuration Descriptor. */
+#define BLE_UUID_DESCRIPTOR_CHAR_PRESENTATION_FORMAT 0x2904 /**< Characteristic Presentation Format Descriptor. */
+#define BLE_UUID_DESCRIPTOR_CHAR_AGGREGATE_FORMAT 0x2905 /**< Characteristic Aggregate Format Descriptor. */
+/* GATT specific UUIDs */
+#define BLE_UUID_GATT 0x1801 /**< Generic Attribute Profile. */
+#define BLE_UUID_GATT_CHARACTERISTIC_SERVICE_CHANGED 0x2A05 /**< Service Changed Characteristic. */
+/* GAP specific UUIDs */
+#define BLE_UUID_GAP 0x1800 /**< Generic Access Profile. */
+#define BLE_UUID_GAP_CHARACTERISTIC_DEVICE_NAME 0x2A00 /**< Device Name Characteristic. */
+#define BLE_UUID_GAP_CHARACTERISTIC_APPEARANCE 0x2A01 /**< Appearance Characteristic. */
+#define BLE_UUID_GAP_CHARACTERISTIC_PPF 0x2A02 /**< Peripheral Privacy Flag Characteristic. */
+#define BLE_UUID_GAP_CHARACTERISTIC_RECONN_ADDR 0x2A03 /**< Reconnection Address Characteristic. */
+#define BLE_UUID_GAP_CHARACTERISTIC_PPCP 0x2A04 /**< Peripheral Preferred Connection Parameters Characteristic. */
+/** @} */
+
+
+/** @defgroup BLE_UUID_TYPES Types of UUID
+ * @{ */
+#define BLE_UUID_TYPE_UNKNOWN 0x00 /**< Invalid UUID type. */
+#define BLE_UUID_TYPE_BLE 0x01 /**< Bluetooth SIG UUID (16-bit). */
+#define BLE_UUID_TYPE_VENDOR_BEGIN 0x02 /**< Vendor UUID types start at this index (128-bit). */
+/** @} */
+
+
+/** @defgroup BLE_APPEARANCES Bluetooth Appearance values
+ * @note Retrieved from http://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.gap.appearance.xml
+ * @{ */
+#define BLE_APPEARANCE_UNKNOWN 0 /**< Unknown. */
+#define BLE_APPEARANCE_GENERIC_PHONE 64 /**< Generic Phone. */
+#define BLE_APPEARANCE_GENERIC_COMPUTER 128 /**< Generic Computer. */
+#define BLE_APPEARANCE_GENERIC_WATCH 192 /**< Generic Watch. */
+#define BLE_APPEARANCE_WATCH_SPORTS_WATCH 193 /**< Watch: Sports Watch. */
+#define BLE_APPEARANCE_GENERIC_CLOCK 256 /**< Generic Clock. */
+#define BLE_APPEARANCE_GENERIC_DISPLAY 320 /**< Generic Display. */
+#define BLE_APPEARANCE_GENERIC_REMOTE_CONTROL 384 /**< Generic Remote Control. */
+#define BLE_APPEARANCE_GENERIC_EYE_GLASSES 448 /**< Generic Eye-glasses. */
+#define BLE_APPEARANCE_GENERIC_TAG 512 /**< Generic Tag. */
+#define BLE_APPEARANCE_GENERIC_KEYRING 576 /**< Generic Keyring. */
+#define BLE_APPEARANCE_GENERIC_MEDIA_PLAYER 640 /**< Generic Media Player. */
+#define BLE_APPEARANCE_GENERIC_BARCODE_SCANNER 704 /**< Generic Barcode Scanner. */
+#define BLE_APPEARANCE_GENERIC_THERMOMETER 768 /**< Generic Thermometer. */
+#define BLE_APPEARANCE_THERMOMETER_EAR 769 /**< Thermometer: Ear. */
+#define BLE_APPEARANCE_GENERIC_HEART_RATE_SENSOR 832 /**< Generic Heart rate Sensor. */
+#define BLE_APPEARANCE_HEART_RATE_SENSOR_HEART_RATE_BELT 833 /**< Heart Rate Sensor: Heart Rate Belt. */
+#define BLE_APPEARANCE_GENERIC_BLOOD_PRESSURE 896 /**< Generic Blood Pressure. */
+#define BLE_APPEARANCE_BLOOD_PRESSURE_ARM 897 /**< Blood Pressure: Arm. */
+#define BLE_APPEARANCE_BLOOD_PRESSURE_WRIST 898 /**< Blood Pressure: Wrist. */
+#define BLE_APPEARANCE_GENERIC_HID 960 /**< Human Interface Device (HID). */
+#define BLE_APPEARANCE_HID_KEYBOARD 961 /**< Keyboard (HID Subtype). */
+#define BLE_APPEARANCE_HID_MOUSE 962 /**< Mouse (HID Subtype). */
+#define BLE_APPEARANCE_HID_JOYSTICK 963 /**< Joystiq (HID Subtype). */
+#define BLE_APPEARANCE_HID_GAMEPAD 964 /**< Gamepad (HID Subtype). */
+#define BLE_APPEARANCE_HID_DIGITIZERSUBTYPE 965 /**< Digitizer Tablet (HID Subtype). */
+#define BLE_APPEARANCE_HID_CARD_READER 966 /**< Card Reader (HID Subtype). */
+#define BLE_APPEARANCE_HID_DIGITAL_PEN 967 /**< Digital Pen (HID Subtype). */
+#define BLE_APPEARANCE_HID_BARCODE 968 /**< Barcode Scanner (HID Subtype). */
+#define BLE_APPEARANCE_GENERIC_GLUCOSE_METER 1024 /**< Generic Glucose Meter. */
+#define BLE_APPEARANCE_GENERIC_RUNNING_WALKING_SENSOR 1088 /**< Generic Running Walking Sensor. */
+#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_IN_SHOE 1089 /**< Running Walking Sensor: In-Shoe. */
+#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_SHOE 1090 /**< Running Walking Sensor: On-Shoe. */
+#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_HIP 1091 /**< Running Walking Sensor: On-Hip. */
+#define BLE_APPEARANCE_GENERIC_CYCLING 1152 /**< Generic Cycling. */
+#define BLE_APPEARANCE_CYCLING_CYCLING_COMPUTER 1153 /**< Cycling: Cycling Computer. */
+#define BLE_APPEARANCE_CYCLING_SPEED_SENSOR 1154 /**< Cycling: Speed Sensor. */
+#define BLE_APPEARANCE_CYCLING_CADENCE_SENSOR 1155 /**< Cycling: Cadence Sensor. */
+#define BLE_APPEARANCE_CYCLING_POWER_SENSOR 1156 /**< Cycling: Power Sensor. */
+#define BLE_APPEARANCE_CYCLING_SPEED_CADENCE_SENSOR 1157 /**< Cycling: Speed and Cadence Sensor. */
+/** @} */
+
+/** @brief Set .type and .uuid fields of ble_uuid_struct to specified uuid value. */
+#define BLE_UUID_BLE_ASSIGN(instance, value) do {\
+ instance.type = BLE_UUID_TYPE_BLE; \
+ instance.uuid = value;} while(0)
+
+/** @brief Copy type and uuid members from src to dst ble_uuid_t pointer. Both pointers must be valid/non-null. */
+#define BLE_UUID_COPY_PTR(dst, src) do {\
+ (dst)->type = (src)->type; \
+ (dst)->uuid = (src)->uuid;} while(0)
+
+/** @brief Copy type and uuid members from src to dst ble_uuid_t struct. */
+#define BLE_UUID_COPY_INST(dst, src) do {\
+ (dst).type = (src).type; \
+ (dst).uuid = (src).uuid;} while(0)
+
+/** @brief Compare for equality both type and uuid members of two (valid, non-null) ble_uuid_t pointers. */
+#define BLE_UUID_EQ(p_uuid1, p_uuid2) \
+ (((p_uuid1)->type == (p_uuid2)->type) && ((p_uuid1)->uuid == (p_uuid2)->uuid))
+
+/** @brief Compare for difference both type and uuid members of two (valid, non-null) ble_uuid_t pointers. */
+#define BLE_UUID_NEQ(p_uuid1, p_uuid2) \
+ (((p_uuid1)->type != (p_uuid2)->type) || ((p_uuid1)->uuid != (p_uuid2)->uuid))
+
+/** @} */
+
+/** @brief 128 bit UUID values. */
+typedef struct
+{
+ unsigned char uuid128[16];
+} ble_uuid128_t;
+
+/** @brief Bluetooth Low Energy UUID type, encapsulates both 16-bit and 128-bit UUIDs. */
+typedef struct
+{
+ uint16_t uuid; /**< 16-bit UUID value or octets 12-13 of 128-bit UUID. */
+ uint8_t type; /**< UUID type, see @ref BLE_UUID_TYPES. If type is BLE_UUID_TYPE_UNKNOWN, the value of uuid is undefined. */
+} ble_uuid_t;
+
+
+
+#endif /* BLE_TYPES_H__ */
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/nrf_error.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/nrf_error.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @defgroup nrf_error SoftDevice Global Error Codes
+ @{
+
+ @brief Global Error definitions
+*/
+
+/* Header guard */
+#ifndef NRF_ERROR_H__
+#define NRF_ERROR_H__
+
+/** @defgroup NRF_ERRORS_BASE Error Codes Base number definitions
+ * @{ */
+#define NRF_ERROR_BASE_NUM (0x0) ///< Global error base
+#define NRF_ERROR_SDM_BASE_NUM (0x1000) ///< SDM error base
+#define NRF_ERROR_SOC_BASE_NUM (0x2000) ///< SoC error base
+#define NRF_ERROR_STK_BASE_NUM (0x3000) ///< STK error base
+/** @} */
+
+#define NRF_SUCCESS (NRF_ERROR_BASE_NUM + 0) ///< Successful command
+#define NRF_ERROR_SVC_HANDLER_MISSING (NRF_ERROR_BASE_NUM + 1) ///< SVC handler is missing
+#define NRF_ERROR_SOFTDEVICE_NOT_ENABLED (NRF_ERROR_BASE_NUM + 2) ///< SoftDevice has not been enabled
+#define NRF_ERROR_INTERNAL (NRF_ERROR_BASE_NUM + 3) ///< Internal Error
+#define NRF_ERROR_NO_MEM (NRF_ERROR_BASE_NUM + 4) ///< No Memory for operation
+#define NRF_ERROR_NOT_FOUND (NRF_ERROR_BASE_NUM + 5) ///< Not found
+#define NRF_ERROR_NOT_SUPPORTED (NRF_ERROR_BASE_NUM + 6) ///< Not supported
+#define NRF_ERROR_INVALID_PARAM (NRF_ERROR_BASE_NUM + 7) ///< Invalid Parameter
+#define NRF_ERROR_INVALID_STATE (NRF_ERROR_BASE_NUM + 8) ///< Invalid state, operation disallowed in this state
+#define NRF_ERROR_INVALID_LENGTH (NRF_ERROR_BASE_NUM + 9) ///< Invalid Length
+#define NRF_ERROR_INVALID_FLAGS (NRF_ERROR_BASE_NUM + 10) ///< Invalid Flags
+#define NRF_ERROR_INVALID_DATA (NRF_ERROR_BASE_NUM + 11) ///< Invalid Data
+#define NRF_ERROR_DATA_SIZE (NRF_ERROR_BASE_NUM + 12) ///< Data size exceeds limit
+#define NRF_ERROR_TIMEOUT (NRF_ERROR_BASE_NUM + 13) ///< Operation timed out
+#define NRF_ERROR_NULL (NRF_ERROR_BASE_NUM + 14) ///< Null Pointer
+#define NRF_ERROR_FORBIDDEN (NRF_ERROR_BASE_NUM + 15) ///< Forbidden Operation
+#define NRF_ERROR_INVALID_ADDR (NRF_ERROR_BASE_NUM + 16) ///< Bad Memory Address
+#define NRF_ERROR_BUSY (NRF_ERROR_BASE_NUM + 17) ///< Busy
+
+#endif // NRF_ERROR_H__
+
+/**
+ @}
+*/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/nrf_error_sdm.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/nrf_error_sdm.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @addtogroup nrf_sdm_api
+ @{
+ @defgroup nrf_sdm_error SoftDevice Manager Error Codes
+ @{
+
+ @brief Error definitions for the SDM API
+*/
+
+/* Header guard */
+#ifndef NRF_ERROR_SDM_H__
+#define NRF_ERROR_SDM_H__
+
+#include "nrf_error.h"
+
+#define NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN (NRF_ERROR_SDM_BASE_NUM + 0) ///< Unknown lfclk source
+#define NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION (NRF_ERROR_SDM_BASE_NUM + 1) ///< Incorrect interrupt configuration (can be caused by using illegal priority levels, or having enabled SoftDevice interrupts)
+#define NRF_ERROR_SDM_INCORRECT_CLENR0 (NRF_ERROR_SDM_BASE_NUM + 2) ///< Incorrect CLENR0 (can be caused by erronous SoftDevice flashing)
+
+#endif // NRF_ERROR_SDM_H__
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/nrf_error_soc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/nrf_error_soc.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @addtogroup nrf_soc_api
+ @{
+ @defgroup nrf_soc_error SoC Library Error Codes
+ @{
+
+ @brief Error definitions for the SoC library
+
+*/
+
+/* Header guard */
+#ifndef NRF_ERROR_SOC_H__
+#define NRF_ERROR_SOC_H__
+
+#include "nrf_error.h"
+
+/* Mutex Errors */
+#define NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN (NRF_ERROR_SOC_BASE_NUM + 0) ///< Mutex already taken
+
+/* NVIC errors */
+#define NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE (NRF_ERROR_SOC_BASE_NUM + 1) ///< NVIC interrupt not available
+#define NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED (NRF_ERROR_SOC_BASE_NUM + 2) ///< NVIC interrupt priority not allowed
+#define NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN (NRF_ERROR_SOC_BASE_NUM + 3) ///< NVIC should not return
+
+/* Power errors */
+#define NRF_ERROR_SOC_POWER_MODE_UNKNOWN (NRF_ERROR_SOC_BASE_NUM + 4) ///< Power mode unknown
+#define NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN (NRF_ERROR_SOC_BASE_NUM + 5) ///< Power POF threshold unknown
+#define NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN (NRF_ERROR_SOC_BASE_NUM + 6) ///< Power off should not return
+
+/* Rand errors */
+#define NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES (NRF_ERROR_SOC_BASE_NUM + 7) ///< RAND not enough values
+
+/* PPI errors */
+#define NRF_ERROR_SOC_PPI_INVALID_CHANNEL (NRF_ERROR_SOC_BASE_NUM + 8) ///< Invalid PPI Channel
+#define NRF_ERROR_SOC_PPI_INVALID_GROUP (NRF_ERROR_SOC_BASE_NUM + 9) ///< Invalid PPI Group
+
+#endif // NRF_ERROR_SOC_H__
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/nrf_sdm.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/nrf_sdm.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @defgroup nrf_sdm_api SoftDevice Manager API
+ @{
+
+ @brief APIs for SoftDevice management.
+
+*/
+
+/* Header guard */
+#ifndef NRF_SDM_H__
+#define NRF_SDM_H__
+
+#include "nordic_global.h"
+#include "nrf_svc.h"
+#include "nrf51.h"
+#include "nrf_soc.h"
+#include "nrf_error_sdm.h"
+
+/** @addtogroup NRF_SDM_DEFINES Defines
+ * @{ */
+
+/**@brief SoftDevice Manager SVC Base number. */
+#define SDM_SVC_BASE 0x10
+
+/** @} */
+
+/** @addtogroup NRF_SDM_ENUMS Enumerations
+ * @{ */
+
+/**@brief nRF SoftDevice Manager API SVC numbers. */
+enum NRF_SD_SVCS
+{
+ SD_SOFTDEVICE_ENABLE = SDM_SVC_BASE, /**< ::sd_softdevice_enable */
+ SD_SOFTDEVICE_DISABLE, /**< ::sd_softdevice_disable */
+ SD_SOFTDEVICE_IS_ENABLED, /**< ::sd_softdevice_is_enabled */
+ SD_SOFTDEVICE_FORWARD_TO_APPLICATION,/**< ::sd_softdevice_forward_to_application */
+ SVC_SDM_LAST /**< Placeholder for last SDM SVC */
+};
+
+/**@brief Possible lfclk oscillator sources. */
+enum NRF_CLOCK_LFCLKSRCS
+{
+ NRF_CLOCK_LFCLKSRC_SYNTH_250_PPM, /**< LFCLK Synthesized from HFCLK. */
+ NRF_CLOCK_LFCLKSRC_XTAL_500_PPM, /**< LFCLK crystal oscillator 500 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_250_PPM, /**< LFCLK crystal oscillator 250 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_150_PPM, /**< LFCLK crystal oscillator 150 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_100_PPM, /**< LFCLK crystal oscillator 100 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_75_PPM, /**< LFCLK crystal oscillator 75 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_50_PPM, /**< LFCLK crystal oscillator 50 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_30_PPM, /**< LFCLK crystal oscillator 30 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, /**< LFCLK crystal oscillator 20 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_250MS_CALIBRATION, /**< LFCLK RC oscillator, 250ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_500MS_CALIBRATION, /**< LFCLK RC oscillator, 500ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_1000MS_CALIBRATION, /**< LFCLK RC oscillator, 1000ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_2000MS_CALIBRATION, /**< LFCLK RC oscillator, 2000ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_4000MS_CALIBRATION, /**< LFCLK RC oscillator, 4000ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_8000MS_CALIBRATION, /**< LFCLK RC oscillator, 8000ms calibration interval.*/
+};
+
+/** @} */
+
+/** @addtogroup NRF_SDM_TYPES Types
+ * @{ */
+
+/**@brief Type representing lfclk oscillator source. */
+typedef uint32_t nrf_clock_lfclksrc_t;
+
+
+/**@brief SoftDevice Assertion Handler type.
+ *
+ * When an unexpected error occurs within the SoftDevice it will call the SoftDevice assertion handler callback.
+ * The protocol stack will be in an undefined state when this happens and the only way to recover will be to
+ * perform a reset, using e.g. CMSIS NVIC_SystemReset().
+ *
+ * @note This callback is executed in HardFault context, thus SVC functions cannot be called from the SoftDevice assert callback.
+ *
+ * @param[in] pc The program counter of the failed assert.
+ * @param[in] line_number Line number where the assert failed.
+ * @param[in] file_name File name where the assert failed.
+ */
+typedef void (*softdevice_assertion_handler_t)(uint32_t pc, uint16_t line_number, const uint8_t * p_file_name);
+
+/** @} */
+
+/** @addtogroup NRF_SDM_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Enables the SoftDevice and by extension the protocol stack.
+ *
+ * Idempotent function to enable the SoftDevice.
+ *
+ * @note Some care must be taken if a low frequency clock source is already running when calling this function:
+ * If the LF clock has a different source then the one currently running, it will be stopped. Then, the new
+ * clock source will be started.
+ *
+ * @note This function has no effect when returning with an error.
+ *
+ * @post If return code is ::NRF_SUCCESS
+ * - SoC library and protocol stack APIs are made available
+ * - A portion of RAM will be unavailable (see relevant SDS documentation)
+ * - Some peripherals will be unavailable or available only through the SoC API (see relevant SDS documentation)
+ * - Interrupts will not arrive from protected peripherals or interrupts
+ * - nrf_nvic_ functions must be used instead of CMSIS NVIC_ functions for reliable usage of the softdevice.
+ * - Interrupt latency may be affected by the SoftDevice (see relevant SDS documentation)
+ * - Chosen low frequency clock source will be running
+ *
+ * @param clock_source Low frequency clock source and accuracy. (Note: In the case of XTAL source, the PPM accuracy of the chosen clock source must be greater than or equal to the actual characteristics of your XTAL clock).
+ * @param assertion_handler Callback for SoftDevice assertions.
+ *
+ * @retval ::NRF_SUCCESS
+ * @retval ::NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION SoftDeviceinterrupt is already enabled, or an enabled interrupt has an illegal priority level
+ * @retval ::NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN Unknown low frequency clock source selected
+ */
+SVCALL(SD_SOFTDEVICE_ENABLE, uint32_t, sd_softdevice_enable(nrf_clock_lfclksrc_t clock_source, softdevice_assertion_handler_t assertion_handler));
+
+/**@brief Disables the SoftDevice and by extension the protocol stack.
+ *
+ * Idempotent function to disable the SoftDevice.
+ *
+ * @post SoC library and protocol stack APIs are made unavailable.
+ * @post All interrupts that was protected by the SoftDevice will be disabled and initialized to priority 0 (highest).
+ * @post All peripherals used by the SoftDevice will be reset to default values.
+ * @post All of RAM become available.
+ * @post All interrupts are forwarded to the application.
+ * @post LFCLK source chosen in ::sd_softdevice_enable will be left running.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_SOFTDEVICE_DISABLE, uint32_t, sd_softdevice_disable(void));
+
+/**@brief Check if the SoftDevice is enabled.
+ *
+ * @param[out] p_softdevice_enabled If the SoftDevice is enabled: 1 else 0.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_SOFTDEVICE_IS_ENABLED, uint32_t, sd_softdevice_is_enabled(uint8_t * p_softdevice_enabled));
+
+/**@brief Start forwarding interrupts to application.
+ *
+ * This function is only intended to be called when a bootloader is enabled is used.
+ * The bootloader should call this right before it starts the application.
+ * It is recommended that all interrupt sources are off when this is called,
+ * or you could end up having interrupts in the application being executed before main() of the application.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_SOFTDEVICE_FORWARD_TO_APPLICATION, uint32_t, sd_softdevice_forward_to_application(void));
+
+/** @} */
+
+#endif // NRF_SDM_H__
+
+/**
+ @}
+*/
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/nrf_soc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/nrf_soc.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,778 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+
+/**
+ @defgroup nrf_soc_api SoC Library API
+ @{
+
+ @brief APIs for the SoC library.
+
+*/
+
+#ifndef NRF_SOC_H__
+#define NRF_SOC_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nordic_global.h"
+#include "nrf_svc.h"
+#include "nrf51.h"
+#include "nrf51_bitfields.h"
+#include "nrf_error_soc.h"
+
+/** @addtogroup NRF_SOC_DEFINES Defines
+ * @{ */
+
+/**@brief The number of the lowest SVC number reserved for the SoC library. */
+#define SOC_SVC_BASE 0x20
+
+/**@brief Guranteed time for application to process radio inactive notification. */
+#define NRF_RADIO_NOTIFICATION_INACTIVE_GUARANTEED_TIME_US (62)
+
+#define SOC_ECB_KEY_LENGTH (16) /**< ECB key length. */
+#define SOC_ECB_CLEARTEXT_LENGTH (16) /**< ECB cleartext length. */
+#define SOC_ECB_CIPHERTEXT_LENGTH (SOC_ECB_CLEARTEXT_LENGTH) /**< ECB ciphertext length. */
+
+#define SD_EVT_IRQn (SWI2_IRQn) /**< SoftDevice Event IRQ number. Used for both protocol events and SoC events. */
+#define SD_EVT_IRQHandler (SWI2_IRQHandler) /**< SoftDevice Event IRQ handler. Used for both protocol events and SoC events. */
+#define RADIO_NOTIFICATION_IRQn (SWI1_IRQn) /**< The radio notification IRQ number. */
+#define RADIO_NOTIFICATION_IRQHandler (SWI1_IRQHandler) /**< The radio notification IRQ handler. */
+
+/** @} */
+
+/** @addtogroup NRF_SOC_TYPES Types
+ * @{ */
+
+/**@brief The SVC numbers used by the SVC functions in the SoC library. */
+enum NRF_SOC_SVCS
+{
+ SD_MUTEX_NEW = SOC_SVC_BASE,
+ SD_MUTEX_ACQUIRE,
+ SD_MUTEX_RELEASE,
+ SD_NVIC_ENABLEIRQ,
+ SD_NVIC_DISABLEIRQ,
+ SD_NVIC_GETPENDINGIRQ,
+ SD_NVIC_SETPENDINGIRQ,
+ SD_NVIC_CLEARPENDINGIRQ,
+ SD_NVIC_SETPRIORITY,
+ SD_NVIC_GETPRIORITY,
+ SD_NVIC_SYSTEMRESET,
+ SD_NVIC_CRITICAL_REGION_ENTER,
+ SD_NVIC_CRITICAL_REGION_EXIT,
+ SD_RAND_APPLICATION_POOL_CAPACITY,
+ SD_RAND_APPLICATION_BYTES_AVAILABLE,
+ SD_RAND_APPLICATION_GET_VECTOR,
+ SD_POWER_MODE_SET,
+ SD_POWER_SYSTEM_OFF,
+ SD_POWER_RESET_REASON_GET,
+ SD_POWER_RESET_REASON_CLR,
+ SD_POWER_POF_ENABLE,
+ SD_POWER_POF_THRESHOLD_SET,
+ SD_POWER_RAMON_SET,
+ SD_POWER_RAMON_CLR,
+ SD_POWER_RAMON_GET,
+ SD_POWER_GPREGRET_SET,
+ SD_POWER_GPREGRET_CLR,
+ SD_POWER_GPREGRET_GET,
+ SD_POWER_DCDC_MODE_SET,
+ SD_APP_EVT_WAIT,
+ SD_CLOCK_HFCLK_REQUEST,
+ SD_CLOCK_HFCLK_RELEASE,
+ SD_CLOCK_HFCLK_IS_RUNNING,
+ SD_PPI_CHANNEL_ENABLE_GET,
+ SD_PPI_CHANNEL_ENABLE_SET,
+ SD_PPI_CHANNEL_ENABLE_CLR,
+ SD_PPI_CHANNEL_ASSIGN,
+ SD_PPI_GROUP_TASK_ENABLE,
+ SD_PPI_GROUP_TASK_DISABLE,
+ SD_PPI_GROUP_ASSIGN,
+ SD_PPI_GROUP_GET,
+ SD_RADIO_NOTIFICATION_CFG_SET,
+ SD_ECB_BLOCK_ENCRYPT,
+ SD_RESERVED1,
+ SD_RESERVED2,
+ SD_RESERVED3,
+ SD_EVT_GET,
+ SD_TEMP_GET,
+ SD_FLASH_ERASE_PAGE,
+ SD_FLASH_WRITE,
+ SD_FLASH_PROTECT,
+ SVC_SOC_LAST
+};
+
+/**@brief Possible values of a ::nrf_mutex_t. */
+enum NRF_MUTEX_VALUES
+{
+ NRF_MUTEX_FREE,
+ NRF_MUTEX_TAKEN
+};
+
+/**@brief Possible values of ::nrf_app_irq_priority_t. */
+enum NRF_APP_PRIORITIES
+{
+ NRF_APP_PRIORITY_HIGH = 1,
+ NRF_APP_PRIORITY_LOW = 3
+};
+
+/**@brief Possible values of ::nrf_power_mode_t. */
+enum NRF_POWER_MODES
+{
+ NRF_POWER_MODE_CONSTLAT, /**< Constant latency mode. See power management in the reference manual. */
+ NRF_POWER_MODE_LOWPWR /**< Low power mode. See power management in the reference manual. */
+};
+
+
+/**@brief Possible values of ::nrf_power_failure_threshold_t */
+enum NRF_POWER_THRESHOLDS
+{
+ NRF_POWER_THRESHOLD_V21, /**< 2.1 Volts power failure threshold. */
+ NRF_POWER_THRESHOLD_V23, /**< 2.3 Volts power failure threshold. */
+ NRF_POWER_THRESHOLD_V25, /**< 2.5 Volts power failure threshold. */
+ NRF_POWER_THRESHOLD_V27 /**< 2.7 Volts power failure threshold. */
+};
+
+
+/**@brief Possible values of ::nrf_power_dcdc_mode_t. */
+enum NRF_POWER_DCDC_MODES
+{
+ NRF_POWER_DCDC_MODE_OFF, /**< The DCDC is always off. */
+ NRF_POWER_DCDC_MODE_ON, /**< The DCDC is always on. */
+ NRF_POWER_DCDC_MODE_AUTOMATIC /**< The DCDC is automatically managed. */
+};
+
+/**@brief Possible values of ::nrf_radio_notification_distance_t. */
+enum NRF_RADIO_NOTIFICATION_DISTANCES
+{
+ NRF_RADIO_NOTIFICATION_DISTANCE_NONE = 0, /**< The event does not have a notification. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_800US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_1740US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_2680US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_3620US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_4560US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_5500US /**< The distance from the active notification to start of radio activity. */
+};
+
+
+/**@brief Possible values of ::nrf_radio_notification_type_t. */
+enum NRF_RADIO_NOTIFICATION_TYPES
+{
+ NRF_RADIO_NOTIFICATION_TYPE_NONE = 0, /**< The event does not have a radio notification signal. */
+ NRF_RADIO_NOTIFICATION_TYPE_INT_ON_ACTIVE, /**< Using interrupt for notification when the radio will be enabled. */
+ NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE, /**< Using interrupt for notification when the radio has been disabled. */
+ NRF_RADIO_NOTIFICATION_TYPE_INT_ON_BOTH, /**< Using interrupt for notification both when the radio will be enabled and disabled. */
+};
+
+/**@brief SoC Events. */
+enum NRF_SOC_EVTS
+{
+ NRF_EVT_HFCLKSTARTED, /**< Event indicating that the HFCLK has started. */
+ NRF_EVT_POWER_FAILURE_WARNING, /**< Event indicating that a power failure warning has occurred. */
+ NRF_EVT_FLASH_OPERATION_SUCCESS, /**< Event indicating that the ongoing flash operation has completed successfully. */
+ NRF_EVT_FLASH_OPERATION_ERROR, /**< Event indicating that the ongoing flash operation has timed out with an error. */
+ NRF_EVT_RESERVED1,
+ NRF_EVT_RESERVED2,
+ NRF_EVT_RESERVED3,
+ NRF_EVT_RESERVED4,
+ NRF_EVT_RESERVED5,
+ NRF_EVT_NUMBER_OF_EVTS
+};
+
+/** @} */
+
+/** @addtogroup NRF_SOC_TYPES Types
+ * @{ */
+
+/**@brief Represents a mutex for use with the nrf_mutex functions.
+ * @note Accessing the value directly is not safe, use the mutex functions!
+ */
+typedef volatile uint8_t nrf_mutex_t;
+
+/**@brief The interrupt priorities available to the application while the softdevice is active. */
+typedef uint8_t nrf_app_irq_priority_t;
+
+/**@brief Represents a power mode, used in power mode functions */
+typedef uint8_t nrf_power_mode_t;
+
+/**@brief Represents a power failure threshold value. */
+typedef uint8_t nrf_power_failure_threshold_t;
+
+/**@brief Represents a DCDC mode value. */
+typedef uint32_t nrf_power_dcdc_mode_t;
+
+/**@brief Radio notification distances. */
+typedef uint8_t nrf_radio_notification_distance_t;
+
+/**@brief Radio notification types. */
+typedef uint8_t nrf_radio_notification_type_t;
+
+
+/**@brief AES ECB data structure */
+typedef struct
+{
+ uint8_t key[SOC_ECB_KEY_LENGTH]; /**< Encryption key. */
+ uint8_t cleartext[SOC_ECB_CLEARTEXT_LENGTH]; /**< Clear Text data. */
+ uint8_t ciphertext[SOC_ECB_CIPHERTEXT_LENGTH]; /**< Cipher Text data. */
+} nrf_ecb_hal_data_t;
+
+/** @} */
+
+/** @addtogroup NRF_SOC_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Initialize a mutex.
+ *
+ * @param[in] p_mutex Pointer to the mutex to initialize.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_MUTEX_NEW, uint32_t, sd_mutex_new(nrf_mutex_t * p_mutex));
+
+/**@brief Attempt to acquire a mutex.
+ *
+ * @param[in] p_mutex Pointer to the mutex to acquire.
+ *
+ * @retval ::NRF_SUCCESS The mutex was successfully acquired.
+ * @retval ::NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN The mutex could not be acquired.
+ */
+SVCALL(SD_MUTEX_ACQUIRE, uint32_t, sd_mutex_acquire(nrf_mutex_t * p_mutex));
+
+/**@brief Release a mutex.
+ *
+ * @param[in] p_mutex Pointer to the mutex to release.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_MUTEX_RELEASE, uint32_t, sd_mutex_release(nrf_mutex_t * p_mutex));
+
+/**@brief Enable External Interrupt.
+ * @note Corresponds to NVIC_EnableIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_EnableIRQ documentation in CMSIS.
+ *
+ * @retval ::NRF_SUCCESS The interrupt was enabled.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt has a priority not available for the application.
+ */
+SVCALL(SD_NVIC_ENABLEIRQ, uint32_t, sd_nvic_EnableIRQ(IRQn_Type IRQn));
+
+/**@brief Disable External Interrupt.
+ * @note Corresponds to NVIC_DisableIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_DisableIRQ documentation in CMSIS
+ *
+ * @retval ::NRF_SUCCESS The interrupt was disabled.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application.
+ */
+SVCALL(SD_NVIC_DISABLEIRQ, uint32_t, sd_nvic_DisableIRQ(IRQn_Type IRQn));
+
+/**@brief Get Pending Interrupt.
+ * @note Corresponds to NVIC_GetPendingIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_GetPendingIRQ documentation in CMSIS.
+ * @param[out] p_pending_irq Return value from NVIC_GetPendingIRQ.
+ *
+ * @retval ::NRF_SUCCESS The interrupt is available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ */
+SVCALL(SD_NVIC_GETPENDINGIRQ, uint32_t, sd_nvic_GetPendingIRQ(IRQn_Type IRQn, uint32_t * p_pending_irq));
+
+/**@brief Set Pending Interrupt.
+ * @note Corresponds to NVIC_SetPendingIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_SetPendingIRQ documentation in CMSIS.
+ *
+ * @retval ::NRF_SUCCESS The interrupt is set pending.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ */
+SVCALL(SD_NVIC_SETPENDINGIRQ, uint32_t, sd_nvic_SetPendingIRQ(IRQn_Type IRQn));
+
+/**@brief Clear Pending Interrupt.
+ * @note Corresponds to NVIC_ClearPendingIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_ClearPendingIRQ documentation in CMSIS.
+ *
+ * @retval ::NRF_SUCCESS The interrupt pending flag is cleared.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ */
+SVCALL(SD_NVIC_CLEARPENDINGIRQ, uint32_t, sd_nvic_ClearPendingIRQ(IRQn_Type IRQn));
+
+/**@brief Set Interrupt Priority.
+ * @note Corresponds to NVIC_SetPriority in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ * @pre{priority is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_SetPriority documentation in CMSIS.
+ * @param[in] priority A valid IRQ priority for use by the application.
+ *
+ * @retval ::NRF_SUCCESS The interrupt and priority level is available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt priority is not available for the application.
+ */
+SVCALL(SD_NVIC_SETPRIORITY, uint32_t, sd_nvic_SetPriority(IRQn_Type IRQn, nrf_app_irq_priority_t priority));
+
+/**@brief Get Interrupt Priority.
+ * @note Corresponds to NVIC_GetPriority in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_GetPriority documentation in CMSIS.
+ * @param[out] p_priority Return value from NVIC_GetPriority.
+ *
+ * @retval ::NRF_SUCCESS The interrupt priority is returned in p_priority.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE - IRQn is not available for the application.
+ */
+SVCALL(SD_NVIC_GETPRIORITY, uint32_t, sd_nvic_GetPriority(IRQn_Type IRQn, nrf_app_irq_priority_t * p_priority));
+
+/**@brief System Reset.
+ * @note Corresponds to NVIC_SystemReset in CMSIS.
+ *
+ * @retval ::NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN
+ */
+SVCALL(SD_NVIC_SYSTEMRESET, uint32_t, sd_nvic_SystemReset(void));
+
+/**@brief Enters critical region.
+ *
+ * @post Application interrupts will be disabled.
+ * @sa sd_nvic_critical_region_exit
+ *
+ * @param[out] p_is_nested_critical_region 1: If in a nested critical region.
+ * 0: Otherwise.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_NVIC_CRITICAL_REGION_ENTER, uint32_t, sd_nvic_critical_region_enter(uint8_t * p_is_nested_critical_region));
+
+/**@brief Exit critical region.
+ *
+ * @pre Application has entered a critical region using ::sd_nvic_critical_region_enter.
+ * @post If not in a nested critical region, the application interrupts will restored to the state before ::sd_nvic_critical_region_enter was called.
+ *
+ * @param[in] is_nested_critical_region If this is set to 1, the critical region won't be exited. @sa sd_nvic_critical_region_enter.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_NVIC_CRITICAL_REGION_EXIT, uint32_t, sd_nvic_critical_region_exit(uint8_t is_nested_critical_region));
+
+/**@brief Query the capacity of the application random pool.
+ *
+ * @param[out] p_pool_capacity The capacity of the pool.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_RAND_APPLICATION_POOL_CAPACITY, uint32_t, sd_rand_application_pool_capacity_get(uint8_t * p_pool_capacity));
+
+/**@brief Get number of random bytes available to the application.
+ *
+ * @param[out] p_bytes_available The number of bytes currently available in the pool.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_RAND_APPLICATION_BYTES_AVAILABLE, uint32_t, sd_rand_application_bytes_available_get(uint8_t * p_bytes_available));
+
+/**@brief Get random bytes from the application pool.
+
+ @param[out] p_buff Pointer to unit8_t buffer for storing the bytes.
+ @param[in] length Number of bytes to take from pool and place in p_buff.
+
+ @retval ::NRF_SUCCESS The requested bytes were written to p_buff.
+ @retval ::NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES No bytes were written to the buffer, because there were not enough bytes available.
+*/
+SVCALL(SD_RAND_APPLICATION_GET_VECTOR, uint32_t, sd_rand_application_vector_get(uint8_t * p_buff, uint8_t length));
+
+/**@brief Gets the reset reason register.
+ *
+ * @param[out] p_reset_reason Contents of the NRF_POWER->RESETREAS register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RESET_REASON_GET, uint32_t, sd_power_reset_reason_get(uint32_t * p_reset_reason));
+
+/**@brief Clears the bits of the reset reason register.
+ *
+ * @param[in] reset_reason_clr_msk Contains the bits to clear from the reset reason register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RESET_REASON_CLR, uint32_t, sd_power_reset_reason_clr(uint32_t reset_reason_clr_msk));
+
+/**@brief Sets the power mode when in CPU sleep.
+ *
+ * @param[in] power_mode The power mode to use when in CPU sleep. @sa sd_app_evt_wait
+ *
+ * @retval ::NRF_SUCCESS The power mode was set.
+ * @retval ::NRF_ERROR_SOC_POWER_MODE_UNKNOWN The power mode was unknown.
+ */
+SVCALL(SD_POWER_MODE_SET, uint32_t, sd_power_mode_set(nrf_power_mode_t power_mode));
+
+/**@brief Puts the chip in System OFF mode.
+ *
+ * @retval ::NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN
+ */
+SVCALL(SD_POWER_SYSTEM_OFF, uint32_t, sd_power_system_off(void));
+
+/**@brief Enables or disables the power-fail comparator.
+ *
+ * Enabling this will give a softdevice event (NRF_EVT_POWER_FAILURE_WARNING) when the power failure warning occurs.
+ * The event can be retrieved with sd_evt_get();
+ *
+ * @param[in] pof_enable True if the power-fail comparator should be enabled, false if it should be disabled.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_POF_ENABLE, uint32_t, sd_power_pof_enable(uint8_t pof_enable));
+
+/**@brief Sets the power-fail threshold value.
+ *
+ * @param[in] threshold The power-fail threshold value to use.
+ *
+ * @retval ::NRF_SUCCESS The power failure threshold was set.
+ * @retval ::NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN The power failure threshold is unknown.
+ */
+SVCALL(SD_POWER_POF_THRESHOLD_SET, uint32_t, sd_power_pof_threshold_set(nrf_power_failure_threshold_t threshold));
+
+/**@brief Sets bits in the NRF_POWER->RAMON register.
+ *
+ * @param[in] ramon Contains the bits needed to be set in the NRF_POWER->RAMON register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RAMON_SET, uint32_t, sd_power_ramon_set(uint32_t ramon));
+
+/** @brief Clears bits in the NRF_POWER->RAMON register.
+ *
+ * @param ramon Contains the bits needed to be cleared in the NRF_POWER->RAMON register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RAMON_CLR, uint32_t, sd_power_ramon_clr(uint32_t ramon));
+
+/**@brief Get contents of NRF_POWER->RAMON register, indicates power status of ram blocks.
+ *
+ * @param[out] p_ramon Content of NRF_POWER->RAMON register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RAMON_GET, uint32_t, sd_power_ramon_get(uint32_t * p_ramon));
+
+/**@brief Set bits in the NRF_POWER->GPREGRET register.
+ *
+ * @param[in] gpregret_msk Bits to be set in the GPREGRET register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_GPREGRET_SET, uint32_t, sd_power_gpregret_set(uint32_t gpregret_msk));
+
+/**@brief Clear bits in the NRF_POWER->GPREGRET register.
+ *
+ * @param[in] gpregret_msk Bits to be clear in the GPREGRET register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_GPREGRET_CLR, uint32_t, sd_power_gpregret_clr(uint32_t gpregret_msk));
+
+/**@brief Get contents of the NRF_POWER->GPREGRET register.
+ *
+ * @param[out] p_gpregret Contents of the GPREGRET register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_GPREGRET_GET, uint32_t, sd_power_gpregret_get(uint32_t *p_gpregret));
+
+/**@brief Sets the DCDC mode.
+ *
+ * Depending on the internal state of the SoftDevice, the mode change may not happen immediately.
+ * The DCDC mode switch will be blocked when occurring in close proximity to radio transmissions. When
+ * the radio transmission is done, the last mode will be used.
+ *
+ * @param[in] dcdc_mode The mode of the DCDC.
+ *
+ * @retval ::NRF_SUCCESS
+ * @retval ::NRF_ERROR_INVALID_PARAM The DCDC mode is invalid.
+ */
+SVCALL(SD_POWER_DCDC_MODE_SET, uint32_t, sd_power_dcdc_mode_set(nrf_power_dcdc_mode_t dcdc_mode));
+
+/**@brief Request the high frequency crystal oscillator.
+ *
+ * Will start the high frequency crystal oscillator, the startup time of the crystal varies
+ * and the ::sd_clock_hfclk_is_running function can be polled to check if it has started.
+ *
+ * @see sd_clock_hfclk_is_running
+ * @see sd_clock_hfclk_release
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_CLOCK_HFCLK_REQUEST, uint32_t, sd_clock_hfclk_request(void));
+
+/**@brief Releases the high frequency crystal oscillator.
+ *
+ * Will stop the high frequency crystal oscillator, this happens immediately.
+ *
+ * @see sd_clock_hfclk_is_running
+ * @see sd_clock_hfclk_request
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_CLOCK_HFCLK_RELEASE, uint32_t, sd_clock_hfclk_release(void));
+
+/**@brief Checks if the high frequency crystal oscillator is running.
+ *
+ * @see sd_clock_hfclk_request
+ * @see sd_clock_hfclk_release
+ *
+ * @param[out] p_is_running 1 if the external crystal oscillator is running, 0 if not.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_CLOCK_HFCLK_IS_RUNNING, uint32_t, sd_clock_hfclk_is_running(uint32_t * p_is_running));
+
+/**@brief Waits for an application event.
+ *
+ * An application event is either an application interrupt or a pended interrupt when the
+ * interrupt is disabled. When the interrupt is enabled it will be taken immediately since
+ * this function will wait in thread mode, then the execution will return in the application's
+ * main thread. When an interrupt is disabled and gets pended it will return to the application's
+ * thread main. The application must ensure that the pended flag is cleared using
+ * ::sd_nvic_ClearPendingIRQ in order to sleep using this function. This is only necessary for
+ * disabled interrupts, as the interrupt handler will clear the pending flag automatically for
+ * enabled interrupts.
+ *
+ * In order to wake up from disabled interrupts, the SEVONPEND flag has to be set in the Cortex-M0
+ * System Control Register (SCR). @sa CMSIS_SCB
+ *
+ * @note If an application interrupt has happened since the last time sd_app_evt_wait was
+ * called this function will return immediately and not go to sleep. This is to avoid race
+ * conditions that can occur when a flag is updated in the interrupt handler and processed
+ * in the main loop.
+ *
+ * @post An application interrupt has happened or a interrupt pending flag is set.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_APP_EVT_WAIT, uint32_t, sd_app_evt_wait(void));
+
+/**@brief Get PPI channel enable register contents.
+ *
+ * @param[out] p_channel_enable The contents of the PPI CHEN register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_CHANNEL_ENABLE_GET, uint32_t, sd_ppi_channel_enable_get(uint32_t * p_channel_enable));
+
+/**@brief Set PPI channel enable register.
+ *
+ * @param[in] channel_enable_set_msk Mask containing the bits to set in the PPI CHEN register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_CHANNEL_ENABLE_SET, uint32_t, sd_ppi_channel_enable_set(uint32_t channel_enable_set_msk));
+
+/**@brief Clear PPI channel enable register.
+ *
+ * @param[in] channel_enable_clr_msk Mask containing the bits to clear in the PPI CHEN register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_CHANNEL_ENABLE_CLR, uint32_t, sd_ppi_channel_enable_clr(uint32_t channel_enable_clr_msk));
+
+/**@brief Assign endpoints to a PPI channel.
+ *
+ * @param[in] channel_num Number of the PPI channel to assign.
+ * @param[in] evt_endpoint Event endpoint of the PPI channel.
+ * @param[in] task_endpoint Task endpoint of the PPI channel.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_CHANNEL The channel number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_CHANNEL_ASSIGN, uint32_t, sd_ppi_channel_assign(uint8_t channel_num, const volatile void * evt_endpoint, const volatile void * task_endpoint));
+
+/**@brief Task to enable a channel group.
+ *
+ * @param[in] group_num Number of the channel group.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_GROUP_TASK_ENABLE, uint32_t, sd_ppi_group_task_enable(uint8_t group_num));
+
+/**@brief Task to disable a channel group.
+ *
+ * @param[in] group_num Number of the PPI group.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_GROUP_TASK_DISABLE, uint32_t, sd_ppi_group_task_disable(uint8_t group_num));
+
+/**@brief Assign PPI channels to a channel group.
+ *
+ * @param[in] group_num Number of the channel group.
+ * @param[in] channel_msk Mask of the channels to assign to the group.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_GROUP_ASSIGN, uint32_t, sd_ppi_group_assign(uint8_t group_num, uint32_t channel_msk));
+
+/**@brief Gets the PPI channels of a channel group.
+ *
+ * @param[in] group_num Number of the channel group.
+ * @param[out] p_channel_msk Mask of the channels assigned to the group.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_GROUP_GET, uint32_t, sd_ppi_group_get(uint8_t group_num, uint32_t * p_channel_msk));
+
+/**@brief Configures the Radio Notification signal.
+ *
+ * @note
+ * - The notification signal latency depends on the interrupt priority settings of SWI used
+ * for notification signal.
+ * - In the period between the ACTIVE signal and the start of the Radio Event, the SoftDevice
+ * will interrupt the application to do Radio Event preparation.
+ * - Using the Radio Notification feature may limit the bandwidth, as the SoftDevice may have
+ * to shorten the connection events to have time for the Radio Notification signals.
+ *
+ * @param[in] type Type of notification signal.
+ * @ref NRF_RADIO_NOTIFICATION_TYPE_NONE shall be used to turn off radio
+ * notification. Using @ref NRF_RADIO_NOTIFICATION_DISTANCE_NONE is
+ * recommended (but not required) to be used with
+ * @ref NRF_RADIO_NOTIFICATION_TYPE_NONE.
+ *
+ * @param[in] distance Distance between the notification signal and start of radio activity.
+ * This parameter is ignored when @ref NRF_RADIO_NOTIFICATION_TYPE_NONE or
+ * @ref NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE is used.
+ *
+ * @retval ::NRF_ERROR_INVALID_PARAM The group number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_RADIO_NOTIFICATION_CFG_SET, uint32_t, sd_radio_notification_cfg_set(nrf_radio_notification_type_t type, nrf_radio_notification_distance_t distance));
+
+/**@brief Encrypts a block according to the specified parameters.
+ *
+ * 128-bit AES encryption.
+ *
+ * @param[in, out] p_ecb_data Pointer to the ECB parameters' struct (two input
+ * parameters and one output parameter).
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_ECB_BLOCK_ENCRYPT, uint32_t, sd_ecb_block_encrypt(nrf_ecb_hal_data_t * p_ecb_data));
+
+/**@brief Gets any pending events generated by the SoC API.
+ *
+ * The application should keep calling this function to get events, until ::NRF_ERROR_NOT_FOUND is returned.
+ *
+ * @param[out] p_evt_id Set to one of the values in @ref NRF_SOC_EVTS, if any events are pending.
+ *
+ * @retval ::NRF_SUCCESS An event was pending. The event id is written in the p_evt_id parameter.
+ * @retval ::NRF_ERROR_NOT_FOUND No pending events.
+ */
+SVCALL(SD_EVT_GET, uint32_t, sd_evt_get(uint32_t * p_evt_id));
+
+/**@brief Get the temperature measured on the chip
+ *
+ * This function will block until the temperature measurement is done.
+ * It takes around 50us from call to return.
+ *
+ * @note Pan #28 in PAN-028 v 1.6 "Negative measured values are not represented correctly" is corrected by this function.
+ *
+ * @param[out] p_temp Result of temperature measurement. Die temperature in 0.25 degrees celsius.
+ *
+ * @retval ::NRF_SUCCESS A temperature measurement was done, and the temperature was written to temp
+ */
+SVCALL(SD_TEMP_GET, uint32_t, sd_temp_get(int32_t * p_temp));
+
+/**@brief Flash Write
+ *
+ * Commands to write a buffer to flash
+ *
+ * This call initiates the flash access command, and its completion will be communicated to the
+ * application with exactly one of the following events:
+ * - NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed.
+ * - NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started.
+ *
+ * @note
+ * - This call takes control over the radio and the CPU during flash erase and write to make sure that
+ * they will not interfere with the flash access. This means that all interrupts will be blocked
+ * for a predictable time (depending on the NVMC specification in nRF51 Series Reference Manual
+ * and the command parameters).
+ *
+ *
+ * @param[in] p_dst Pointer to start of flash location to be written.
+ * @param[in] p_src Pointer to buffer with data to be written
+ * @param[in] size Number of 32-bit words to write. Maximum size is 256 32bit words.
+ *
+ * @retval ::NRF_ERROR_INVALID_ADDR Tried to write to a non existing flash address, or p_dst or p_src was unaligned.
+ * @retval ::NRF_ERROR_BUSY The previous command has not yet completed.
+ * @retval ::NRF_ERROR_INVALID_LENGTH Size was 0, or more than 256 words.
+ * @retval ::NRF_ERROR_FORBIDDEN Tried to write to or read from protected location.
+ * @retval ::NRF_SUCCESS The command was accepted.
+ */
+SVCALL(SD_FLASH_WRITE, uint32_t, sd_flash_write(uint32_t * const p_dst, uint32_t const * const p_src, uint32_t size));
+
+
+/**@brief Flash Erase page
+ *
+ * Commands to erase a flash page
+ *
+ * This call initiates the flash access command, and its completion will be communicated to the
+ * application with exactly one of the following events:
+ * - NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed.
+ * - NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started.
+ *
+ * @note
+ * - This call takes control over the radio and the CPU during flash erase and write to make sure that
+ * they will not interfere with the flash access. This means that all interrupts will be blocked
+ * for a predictable time (depending on the NVMC specification in nRF51 Series Reference Manual
+ * and the command parameters).
+ *
+ *
+ * @param[in] page_number Pagenumber of the page to erase
+ * @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error.
+ * @retval ::NRF_ERROR_INVALID_ADDR Tried to erase to a non existing flash page.
+ * @retval ::NRF_ERROR_BUSY The previous command has not yet completed.
+ * @retval ::NRF_ERROR_FORBIDDEN Tried to erase a protected page.
+ * @retval ::NRF_SUCCESS The command was accepted.
+ */
+SVCALL(SD_FLASH_ERASE_PAGE, uint32_t, sd_flash_page_erase(uint32_t page_number));
+
+
+/**@brief Flash Protection set
+ *
+ * Commands to set the flash protection registers PROTENSETx
+ *
+ * @note To read the values in PROTENSETx you can read them directly. They are only write-protected.
+ *
+ * @param[in] protenset0 Value to be written to PROTENSET0
+ * @param[in] protenset1 Value to be written to PROTENSET1
+ *
+ * @retval ::NRF_ERROR_FORBIDDEN Tried to protect the SoftDevice
+ * @retval ::NRF_SUCCESS Values successfully written to PROTENSETx
+ */
+SVCALL(SD_FLASH_PROTECT, uint32_t, sd_flash_protect(uint32_t protenset0, uint32_t protenset1));
+
+
+/** @} */
+
+#endif // NRF_SOC_H__
+
+/**
+ @}
+ */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/nrf_svc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/nrf_svc.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,35 @@
+#ifndef NRF_SVC__
+#define NRF_SVC__
+
+#include "nordic_global.h"
+
+#ifdef SVCALL_AS_NORMAL_FUNCTION
+#define SVCALL(number, return_type, signature) return_type signature
+#else
+
+#ifndef SVCALL
+#if defined (__CC_ARM)
+#define SVCALL(number, return_type, signature) return_type __svc(number) signature
+#elif defined (__GNUC__)
+#define SVCALL(number, return_type, signature) \
+ _Pragma("GCC diagnostic ignored \"-Wreturn-type\"") \
+ _Pragma("GCC diagnostic ignored \"-Wunused-function\"") \
+ __attribute__((naked)) static return_type signature \
+ { \
+ __asm( \
+ "svc %0\n" \
+ "bx r14" : : "I" (number) : "r0" \
+ ); \
+ }
+#elif defined (__ICCARM__)
+#define PRAGMA(x) _Pragma(#x)
+#define SVCALL(number, return_type, signature) \
+PRAGMA(swi_number = number) \
+ __swi return_type signature;
+#else
+#define SVCALL(number, return_type, signature) return_type signature
+#endif
+#endif // SVCALL
+
+#endif // SVCALL_AS_NORMAL_FUNCTION
+#endif // NRF_SVC__
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/softdevice_assert.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/s110/softdevice_assert.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+
+/** @brief Utilities for verifying program logic
+ */
+
+#ifndef SOFTDEVICE_ASSERT_H_
+#define SOFTDEVICE_ASSERT_H_
+
+#include <stdint.h>
+#include "nordic_global.h"
+
+/** @brief This function handles assertions.
+ *
+ *
+ * @note
+ * This function is called when an assertion has triggered.
+ *
+ *
+ * @param line_num The line number where the assertion is called
+ * @param file_name Pointer to the file name
+ */
+void assert_softdevice_callback(uint16_t line_num, const uint8_t *file_name);
+
+
+/*lint -emacro(506, ASSERT) */ /* Suppress "Constant value Boolean */
+/*lint -emacro(774, ASSERT) */ /* Suppress "Boolean within 'if' always evaluates to True" */ \
+/** @brief Check intended for production code
+ *
+ * Check passes if "expr" evaluates to true. */
+#define ASSERT(expr) \
+if (expr) \
+{ \
+} \
+else \
+{ \
+ assert_softdevice_callback((uint16_t)__LINE__, (uint8_t *)__FILE__); \
+ /*lint -unreachable */ \
+}
+
+#endif /* SOFTDEVICE_ASSERT_H_ */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/sd_common/ant_stack_handler_types.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/sd_common/ant_stack_handler_types.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,70 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/**@file
+ *
+ * @defgroup ant_stack_handler_types Types definitions for ANT support in SoftDevice handler.
+ * @{
+ * @ingroup app_common
+ * @brief This file contains the declarations of types required for ANT stack support. These
+ * types will be defined when the preprocessor define ANT_STACK_SUPPORT_REQD is defined.
+ */
+
+#ifndef ANT_STACK_HANDLER_TYPES_H__
+#define ANT_STACK_HANDLER_TYPES_H__
+
+#ifdef ANT_STACK_SUPPORT_REQD
+
+#include <stdlib.h>
+#include "nordic_global.h"
+
+#define ANT_STACK_EVT_MSG_BUF_SIZE 32 /**< Size of ANT event message buffer. This will be provided to the SoftDevice while fetching an event. */
+#define ANT_STACK_EVT_STRUCT_SIZE (sizeof(ant_evt_t)) /**< Size of the @ref ant_evt_t structure. This will be used by the @ref softdevice_handler.h to internal event buffer size needed. */
+
+/**@brief ANT stack event type. */
+typedef struct
+{
+ uint8_t channel; /**< Channel number. */
+ uint8_t event; /**< Event code. */
+ uint8_t evt_buffer[ANT_STACK_EVT_MSG_BUF_SIZE]; /**< Event message buffer. */
+} ant_evt_t;
+
+/**@brief Application ANT stack event handler type. */
+typedef void (*ant_evt_handler_t) (ant_evt_t * p_ant_evt);
+
+/**@brief Function for registering for ANT events.
+ *
+ * @details The application should use this function to register for receiving ANT events from
+ * the SoftDevice. If the application does not call this function, then any ANT event
+ * that may be generated by the SoftDevice will NOT be fetched. Once the application has
+ * registered for the events, it is not possible to possible to cancel the registration.
+ * However, it is possible to register a different function for handling the events at
+ * any point of time.
+ *
+ * @param[in] ant_evt_handler Function to be called for each received ANT event.
+ *
+ * @retval NRF_SUCCESS Successful registration.
+ * @retval NRF_ERROR_NULL Null pointer provided as input.
+ */
+uint32_t softdevice_ant_evt_handler_set(ant_evt_handler_t ant_evt_handler);
+
+#else
+
+// The ANT Stack support is not required.
+
+#define ANT_STACK_EVT_STRUCT_SIZE 0 /**< Since the ANT stack support is not required, this is equated to 0, so that the @ref softdevice_handler.h can compute the internal event buffer size without having to care for ANT events.*/
+
+#endif // ANT_STACK_SUPPORT_REQD
+
+#endif // ANT_STACK_HANDLER_TYPES_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/sd_common/ble_stack_handler_types.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/sd_common/ble_stack_handler_types.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,67 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/**@file
+ *
+ * @defgroup ble_stack_handler_types Types definitions for BLE support in SoftDevice handler.
+ * @{
+ * @ingroup app_common
+ * @brief This file contains the declarations of types required for BLE stack support. These
+ * types will be defined when the preprocessor define BLE_STACK_SUPPORT_REQD is defined.
+ */
+
+#ifndef BLE_STACK_HANDLER_TYPES_H__
+#define BLE_STACK_HANDLER_TYPES_H__
+
+#include "nordic_global.h"
+
+#ifdef BLE_STACK_SUPPORT_REQD
+
+#include <stdlib.h>
+#include "ble.h"
+#include "nrf_sdm.h"
+#include "app_error.h"
+#include "app_scheduler.h"
+#include "app_util.h"
+
+#define BLE_STACK_EVT_MSG_BUF_SIZE (sizeof(ble_evt_t) + (GATT_MTU_SIZE_DEFAULT)) /**< Size of BLE event message buffer. This will be provided to the SoftDevice while fetching an event. */
+#define BLE_STACK_HANDLER_SCHED_EVT_SIZE 0 /**< The size of the scheduler event used by SoftDevice handler when passing BLE events using the @ref app_scheduler. */
+
+/**@brief Application stack event handler type. */
+typedef void (*ble_evt_handler_t) (ble_evt_t * p_ble_evt);
+
+/**@brief Function for registering for BLE events.
+ *
+ * @details The application should use this function to register for receiving BLE events from
+ * the SoftDevice. If the application does not call this function, then any BLE event
+ * that may be generated by the SoftDevice will NOT be fetched. Once the application has
+ * registered for the events, it is not possible to possible to cancel the registration.
+ * However, it is possible to register a different function for handling the events at
+ * any point of time.
+ *
+ * @param[in] ble_evt_handler Function to be called for each received BLE event.
+ *
+ * @retval NRF_SUCCESS Successful registration.
+ * @retval NRF_ERROR_NULL Null pointer provided as input.
+ */
+uint32_t softdevice_ble_evt_handler_set(ble_evt_handler_t ble_evt_handler);
+
+#else
+
+#define BLE_STACK_EVT_MSG_BUF_SIZE 0 /**< Since the BLE stack support is not required, this is equated to 0, so that the @ref softdevice_handler.h can compute the internal event buffer size without having to care for BLE events.*/
+#define BLE_STACK_HANDLER_SCHED_EVT_SIZE 0
+
+#endif // BLE_STACK_SUPPORT_REQD
+
+#endif // BLE_STACK_HANDLER_TYPES_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/sd_common/softdevice_handler.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/sd_common/softdevice_handler.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,165 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup softdevice_handler SoftDevice Event Handler
+ * @{
+ * @ingroup app_common
+ * @brief API for initializing and disabling the SoftDevice
+ *
+ * @details This API contains the functions and defines exposed by the @ref lib_softdevice_handler.
+ * For more information on the library and how the application should use it, please refer
+ * @ref lib_softdevice_handler.
+ *
+ * @note Use the USE_SCHEDULER parameter of the SOFTDEVICE_HANDLER_INIT() macro to select if
+ * the @ref app_scheduler is to be used or not.
+ *
+ * @note Even if the scheduler is not used, softdevice_handler.h will include app_scheduler.h.
+ * So when compiling, app_scheduler.h must be available in one of the compiler include
+ * paths.
+ */
+
+#ifndef SOFTDEVICE_HANDLER_H__
+#define SOFTDEVICE_HANDLER_H__
+
+#include <stdlib.h>
+#include "nordic_global.h"
+#include "nrf_sdm.h"
+#include "app_error.h"
+#include "app_scheduler.h"
+#include "app_util.h"
+#include "ble_stack_handler_types.h"
+#include "ant_stack_handler_types.h"
+
+#define SOFTDEVICE_SCHED_EVT_SIZE 0 /**< Size of button events being passed through the scheduler (is to be used for computing the maximum size of scheduler events). For SoftDevice events, this size is 0, since the events are being pulled in the event handler. */
+#define SYS_EVT_MSG_BUF_SIZE sizeof(uint32_t) /**< Size of System (SOC) event message buffer. */
+
+/**@brief Type of function for passing events from the stack handler module to the scheduler. */
+typedef uint32_t (*softdevice_evt_schedule_func_t) (void);
+
+/**@brief Application System (SOC) event handler type. */
+typedef void (*sys_evt_handler_t) (uint32_t evt_id);
+
+
+/**@brief Macro for initializing the stack event handler.
+ *
+ * @details It will handle dimensioning and allocation of the memory buffer required for reading
+ * events from the stack, making sure the buffer is correctly aligned. It will also
+ * connect the stack event handler to the scheduler (if specified).
+ *
+ * @param[in] CLOCK_SOURCE Low frequency clock source and accuracy (type nrf_clock_lfclksrc_t,
+ * see sd_softdevice_enable() for details).
+ * @param[in] USE_SCHEDULER TRUE if the application is using the event scheduler, FALSE
+ * otherwise.
+ *
+ * @note Since this macro allocates a buffer, it must only be called once (it is OK to call it
+ * several times as long as it is from the same location, that is to do a
+ * reinitialization).
+ */
+/*lint -emacro(506, SOFTDEVICE_HANDLER_INIT) */ /* Suppress "Constant value Boolean */
+#define SOFTDEVICE_HANDLER_INIT(CLOCK_SOURCE, \
+ USE_SCHEDULER) \
+ do \
+ { \
+ static uint32_t EVT_BUFFER[CEIL_DIV(MAX( \
+ MAX(BLE_STACK_EVT_MSG_BUF_SIZE, \
+ ANT_STACK_EVT_STRUCT_SIZE), \
+ SYS_EVT_MSG_BUF_SIZE \
+ ), \
+ sizeof(uint32_t))]; \
+ uint32_t ERR_CODE; \
+ ERR_CODE = softdevice_handler_init((CLOCK_SOURCE), \
+ EVT_BUFFER, \
+ sizeof(EVT_BUFFER), \
+ (USE_SCHEDULER) ? softdevice_evt_schedule : NULL); \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } while (0)
+
+
+/**@brief Function for initializing the stack handler module.
+ *
+ * @details Enables the SoftDevice and the stack event interrupt handler.
+ *
+ * @note This function must be called before calling any function in the SoftDevice API.
+ *
+ * @note Normally initialization should be done using the SOFTDEVICE_HANDLER_INIT() macro,
+ * as that will both allocate the event buffer, and also align the buffer correctly.
+ *
+ * @param[in] clock_source Low frequency clock source to be used by the SoftDevice.
+ * @param[in] p_evt_buffer Buffer for holding one stack event. Since heap is not being
+ * used, this buffer must be provided by the application. The
+ * buffer must be large enough to hold the biggest stack event the
+ * application is supposed to handle. The buffer must be aligned to
+ * a 4 byte boundary. This parameter is unused if neither BLE nor
+ * ANT stack support is required.
+ * @param[in] evt_buffer_size Size of SoftDevice event buffer. This parameter is unused if
+ * BLE stack support is not required.
+ * @param[in] evt_schedule_func Function for passing events to the scheduler. Point to
+ * ble_ant_stack_evt_schedule() to connect to the scheduler.
+ * Set to NULL to make the stack handler module call the event
+ * handler directly from the stack event interrupt handler.
+ *
+ * @retval NRF_SUCCESS Successful initialization.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter (buffer not aligned to a 4 byte
+ * boundary) or NULL.
+ */
+uint32_t softdevice_handler_init(nrf_clock_lfclksrc_t clock_source,
+ void * p_evt_buffer,
+ uint16_t evt_buffer_size,
+ softdevice_evt_schedule_func_t evt_schedule_func);
+
+
+/**@brief Function for disabling the SoftDevice.
+ *
+ * @details This function will disable the SoftDevice. It will also update the internal state
+ * of this module.
+ */
+uint32_t softdevice_handler_sd_disable(void);
+
+
+/**@brief Function for registering for System (SOC) events.
+ *
+ * @details The application should use this function to register for receiving System (SOC)
+ * events from the SoftDevice. If the application does not call this function, then any
+ * System (SOC) events that may be generated by the SoftDevice will NOT be fetched. Once
+ * the application has registered for the events, it is not possible to possible to
+ * cancel the registration. However, it is possible to register a different function for
+ * handling the events at any point of time.
+ *
+ * @param[in] sys_evt_handler Function to be called for each received System (SOC) event.
+ *
+ * @retval NRF_SUCCESS Successful registration.
+ * @retval NRF_ERROR_NULL Null pointer provided as input.
+ */
+uint32_t softdevice_sys_evt_handler_set(sys_evt_handler_t sys_evt_handler);
+
+
+// Functions for connecting the Stack Event Handler to the scheduler:
+/**@cond NO_DOXYGEN */
+void intern_softdevice_events_execute(void);
+
+static __INLINE void softdevice_evt_get(void * p_event_data, uint16_t event_size)
+{
+ APP_ERROR_CHECK_BOOL(event_size == 0);
+ intern_softdevice_events_execute();
+}
+
+static __INLINE uint32_t softdevice_evt_schedule(void)
+{
+ return app_sched_event_put(NULL, 0, softdevice_evt_get);
+}
+/**@endcond */
+
+#endif // SOFTDEVICE_HANDLER_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/system_nrf51.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/nrf-sdk/system_nrf51.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,53 @@
+/* Copyright (c) 2009 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+
+#ifndef SYSTEM_NRF51_H
+#define SYSTEM_NRF51_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include "nordic_global.h"
+
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+/**
+ * Initialize the system
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Setup the microcontroller system.
+ * Initialize the System and update the SystemCoreClock variable.
+ */
+extern void SystemInit (void);
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Updates the SystemCoreClock with current core Clock
+ * retrieved from cpu registers.
+ */
+extern void SystemCoreClockUpdate (void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SYSTEM_NRF51_H */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/pstorage_platform.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/pstorage_platform.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,62 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+ /** @cond To make doxygen skip this file */
+
+/** @file
+ * This header contains defines with respect persistent storage that are specific to
+ * persistent storage implementation and application use case.
+ */
+#ifndef PSTORAGE_PL_H__
+#define PSTORAGE_PL_H__
+
+#include <stdint.h>
+#include "nordic_global.h"
+
+#define PSTORAGE_FLASH_PAGE_SIZE ((uint16_t)NRF_FICR->CODEPAGESIZE) /**< Size of one flash page. */
+#define PSTORAGE_FLASH_EMPTY_MASK 0xFFFFFFFF /**< Bit mask that defines an empty address in flash. */
+
+#define PSTORAGE_FLASH_PAGE_END \
+ ((NRF_UICR->BOOTLOADERADDR != PSTORAGE_FLASH_EMPTY_MASK) \
+ ? (NRF_UICR->BOOTLOADERADDR / PSTORAGE_FLASH_PAGE_SIZE) \
+ : NRF_FICR->CODESIZE)
+
+
+#define PSTORAGE_MAX_APPLICATIONS 2 /**< Maximum number of applications that can be registered with the module, configurable based on system requirements. */
+#define PSTORAGE_MIN_BLOCK_SIZE 0x0010 /**< Minimum size of block that can be registered with the module. Should be configured based on system requirements, recommendation is not have this value to be at least size of word. */
+
+#define PSTORAGE_DATA_START_ADDR ((PSTORAGE_FLASH_PAGE_END - PSTORAGE_MAX_APPLICATIONS) \
+ * PSTORAGE_FLASH_PAGE_SIZE) /**< Start address for persistent data, configurable according to system requirements. */
+#define PSTORAGE_DATA_END_ADDR (PSTORAGE_FLASH_PAGE_END * PSTORAGE_FLASH_PAGE_SIZE) /**< End address for persistent data, configurable according to system requirements. */
+
+#define PSTORAGE_MAX_BLOCK_SIZE PSTORAGE_FLASH_PAGE_SIZE /**< Maximum size of block that can be registered with the module. Should be configured based on system requirements. And should be greater than or equal to the minimum size. */
+#define PSTORAGE_CMD_QUEUE_SIZE 30 /**< Maximum number of flash access commands that can be maintained by the module for all applications. Configurable. */
+
+
+/** Abstracts persistently memory block identifier. */
+typedef uint32_t pstorage_block_t;
+
+typedef struct
+{
+ uint32_t module_id; /**< Module ID.*/
+ pstorage_block_t block_id; /**< Block ID.*/
+} pstorage_handle_t;
+
+typedef uint16_t pstorage_size_t; /** Size of length and offset fields. */
+
+/**@brief Handles Flash Access Result Events. To be called in the system event dispatcher of the application. */
+void pstorage_sys_event_handler (uint32_t sys_evt);
+
+#endif // PSTORAGE_PL_H__
+
+/** @} */
+/** @endcond */
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/nordic/softdevice_handler.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API_Native/hw/nRF51822n/nordic/softdevice_handler.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,313 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+#include "softdevice_handler.h"
+#include <stdlib.h>
+#include "nordic_common.h"
+#include "app_error.h"
+#include "app_util.h"
+#include "nrf_assert.h"
+#include "nrf_soc.h"
+#include "mbed.h"
+
+#if defined(ANT_STACK_SUPPORT_REQD) && defined(BLE_STACK_SUPPORT_REQD)
+ #include "ant_interface.h"
+#elif defined(ANT_STACK_SUPPORT_REQD)
+ #include "ant_interface.h"
+#elif defined(BLE_STACK_SUPPORT_REQD)
+ #include "ble.h"
+#endif
+
+
+static softdevice_evt_schedule_func_t m_evt_schedule_func; /**< Pointer to function for propagating SoftDevice events to the scheduler. */
+
+#if defined (BLE_STACK_SUPPORT_REQD) || defined (ANT_STACK_SUPPORT_REQD)
+// The following two definition is needed only if ANT or BLE events are needed to be pulled from the stack.
+static uint8_t * m_evt_buffer; /**< Buffer for receiving events from the SoftDevice. */
+#endif
+
+#ifdef BLE_STACK_SUPPORT_REQD
+static uint16_t m_ble_evt_buffer_size; /**< Size of BLE event buffer. */
+#endif
+
+static volatile bool m_softdevice_enabled = false; /**< Variable to indicate whether the SoftDevice is enabled. */
+
+#ifdef BLE_STACK_SUPPORT_REQD
+static ble_evt_handler_t m_ble_evt_handler; /**< Application event handler for handling BLE events. */
+#endif
+
+#ifdef ANT_STACK_SUPPORT_REQD
+static ant_evt_handler_t m_ant_evt_handler; /**< Application event handler for handling ANT events. */
+#endif
+
+static sys_evt_handler_t m_sys_evt_handler; /**< Application event handler for handling System (SOC) events. */
+
+
+/**@brief Callback function for asserts in the SoftDevice.
+ *
+ * @details A pointer to this function will be passed to the SoftDevice. This function will be
+ * called if an ASSERT statement in the SoftDevice fails.
+ *
+ * @param[in] pc The value of the program counter when the ASSERT call failed.
+ * @param[in] line_num Line number of the failing ASSERT call.
+ * @param[in] file_name File name of the failing ASSERT call.
+ */
+void softdevice_assertion_handler(uint32_t pc, uint16_t line_num, const uint8_t * file_name)
+{
+ UNUSED_PARAMETER(pc);
+ assert_nrf_callback(line_num, file_name);
+}
+
+
+void intern_softdevice_events_execute(void)
+{
+ if (!m_softdevice_enabled)
+ {
+ // SoftDevice not enabled. This can be possible if the SoftDevice was enabled by the
+ // application without using this module's API (i.e softdevice_handler_init)
+
+ return;
+ }
+
+ bool no_more_soc_evts = (m_sys_evt_handler == NULL);
+#ifdef BLE_STACK_SUPPORT_REQD
+ bool no_more_ble_evts = (m_ble_evt_handler == NULL);
+#endif
+#ifdef ANT_STACK_SUPPORT_REQD
+ bool no_more_ant_evts = (m_ant_evt_handler == NULL);
+#endif
+
+ for (;;)
+ {
+ uint32_t err_code;
+
+ if (!no_more_soc_evts)
+ {
+ uint32_t evt_id;
+
+ // Pull event from SOC.
+ err_code = sd_evt_get(&evt_id);
+
+ if (err_code == NRF_ERROR_NOT_FOUND)
+ {
+ no_more_soc_evts = true;
+ }
+ else if (err_code != NRF_SUCCESS)
+ {
+ APP_ERROR_HANDLER(err_code);
+ }
+ else
+ {
+ // Call application's SOC event handler.
+ m_sys_evt_handler(evt_id);
+ }
+ }
+
+#ifdef BLE_STACK_SUPPORT_REQD
+ // Fetch BLE Events.
+ if (!no_more_ble_evts)
+ {
+ // Pull event from stack
+ uint16_t evt_len = m_ble_evt_buffer_size;
+
+ err_code = sd_ble_evt_get(m_evt_buffer, &evt_len);
+ if (err_code == NRF_ERROR_NOT_FOUND)
+ {
+ no_more_ble_evts = true;
+ }
+ else if (err_code != NRF_SUCCESS)
+ {
+ APP_ERROR_HANDLER(err_code);
+ }
+ else
+ {
+ // Call application's BLE stack event handler.
+ m_ble_evt_handler((ble_evt_t *)m_evt_buffer);
+ }
+ }
+#endif
+
+#ifdef ANT_STACK_SUPPORT_REQD
+ // Fetch ANT Events.
+ if (!no_more_ant_evts)
+ {
+ // Pull event from stack
+ err_code = sd_ant_event_get(&((ant_evt_t *)m_evt_buffer)->channel,
+ &((ant_evt_t *)m_evt_buffer)->event,
+ ((ant_evt_t *)m_evt_buffer)->evt_buffer);
+ if (err_code == NRF_ERROR_NOT_FOUND)
+ {
+ no_more_ant_evts = true;
+ }
+ else if (err_code != NRF_SUCCESS)
+ {
+ APP_ERROR_HANDLER(err_code);
+ }
+ else
+ {
+ // Call application's ANT stack event handler.
+ m_ant_evt_handler((ant_evt_t *)m_evt_buffer);
+ }
+ }
+#endif
+
+ if (no_more_soc_evts)
+ {
+ // There are no remaining System (SOC) events to be fetched from the SoftDevice.
+#if defined(ANT_STACK_SUPPORT_REQD) && defined(BLE_STACK_SUPPORT_REQD)
+ // Check if there are any remaining BLE and ANT events.
+ if (no_more_ble_evts && no_more_ant_evts)
+ {
+ break;
+ }
+#elif defined(BLE_STACK_SUPPORT_REQD)
+ // Check if there are any remaining BLE events.
+ if (no_more_ble_evts)
+ {
+ break;
+ }
+#elif defined(ANT_STACK_SUPPORT_REQD)
+ // Check if there are any remaining ANT events.
+ if (no_more_ant_evts)
+ {
+ break;
+ }
+#else
+ // No need to check for BLE or ANT events since there is no support for BLE and ANT
+ // required.
+ break;
+#endif
+ }
+ }
+}
+
+
+uint32_t softdevice_handler_init(nrf_clock_lfclksrc_t clock_source,
+ void * p_evt_buffer,
+ uint16_t evt_buffer_size,
+ softdevice_evt_schedule_func_t evt_schedule_func)
+{
+ uint32_t err_code;
+
+ // Save configuration.
+#if defined (BLE_STACK_SUPPORT_REQD) || defined (ANT_STACK_SUPPORT_REQD)
+ // Check that buffer is not NULL.
+ if (p_evt_buffer == NULL)
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+
+ // Check that buffer is correctly aligned.
+ if (!is_word_aligned(p_evt_buffer))
+ {
+ return NRF_ERROR_INVALID_PARAM;
+ }
+
+ m_evt_buffer = (uint8_t *)p_evt_buffer;
+#else
+ // The variable p_evt_buffer is not needed if neither BLE Stack nor ANT stack support is
+ // required.
+ UNUSED_PARAMETER(p_evt_buffer);
+#endif
+
+#if defined (BLE_STACK_SUPPORT_REQD)
+ m_ble_evt_buffer_size = evt_buffer_size;
+#else
+ // The variable evt_buffer_size is not needed if BLE Stack support is NOT required.
+ UNUSED_PARAMETER(evt_buffer_size);
+#endif
+
+ m_evt_schedule_func = evt_schedule_func;
+
+ // Initialize SoftDevice.
+
+ err_code = sd_softdevice_enable(clock_source, softdevice_assertion_handler);
+ if (err_code != NRF_SUCCESS)
+ {
+ return err_code;
+ }
+
+ m_softdevice_enabled = true;
+ // Enable BLE event interrupt (interrupt priority has already been set by the stack).
+ return sd_nvic_EnableIRQ(SWI2_IRQn);
+}
+
+
+uint32_t softdevice_handler_sd_disable(void)
+{
+ uint32_t err_code = sd_softdevice_disable();
+
+ m_softdevice_enabled = !(err_code == NRF_SUCCESS);
+
+ return err_code;
+}
+
+
+#ifdef BLE_STACK_SUPPORT_REQD
+uint32_t softdevice_ble_evt_handler_set(ble_evt_handler_t ble_evt_handler)
+{
+ if (ble_evt_handler == NULL)
+ {
+ return NRF_ERROR_NULL;
+ }
+
+ m_ble_evt_handler = ble_evt_handler;
+
+ return NRF_SUCCESS;
+}
+#endif
+
+
+#ifdef ANT_STACK_SUPPORT_REQD
+uint32_t softdevice_ant_evt_handler_set(ant_evt_handler_t ant_evt_handler)
+{
+ if (ant_evt_handler == NULL)
+ {
+ return NRF_ERROR_NULL;
+ }
+
+ m_ant_evt_handler = ant_evt_handler;
+
+ return NRF_SUCCESS;
+}
+#endif
+
+
+uint32_t softdevice_sys_evt_handler_set(sys_evt_handler_t sys_evt_handler)
+{
+ if (sys_evt_handler == NULL)
+ {
+ return NRF_ERROR_NULL;
+ }
+
+ m_sys_evt_handler = sys_evt_handler;
+
+ return NRF_SUCCESS;
+}
+
+
+/**@brief Function for handling the Application's BLE Stack events interrupt.
+ *
+ * @details This function is called whenever an event is ready to be pulled.
+ */
+extern "C" void SWI2_IRQHandler(void)
+{
+ if (m_evt_schedule_func != NULL)
+ {
+ uint32_t err_code = m_evt_schedule_func();
+ APP_ERROR_CHECK(err_code);
+ }
+ else
+ {
+ intern_softdevice_events_execute();
+ }
+}
diff -r 000000000000 -r 637031152314 BLE_API_Native/hw/nRF51822n/projectconfig.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/BLE_API_Native/hw/nRF51822n/projectconfig.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,134 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef _PROJECTCONFIG_H_ +#define _PROJECTCONFIG_H_ + +/*========================================================================= + MCU & BOARD SELCTION + + CFG_BOARD is one of the value defined in board.h + -----------------------------------------------------------------------*/ + #define CFG_BOARD BOARD_PCA10001 + #define CFG_MCU_STRING "nRF51822" +/*=========================================================================*/ + + +/*========================================================================= + CODE BASE VERSION SETTINGS + + Please do not modify this version number. To set a version number + for your project or firmware, change the values in your 'boards/' + config file. + -----------------------------------------------------------------------*/ + #define CFG_CODEBASE_VERSION_MAJOR 0 + #define CFG_CODEBASE_VERSION_MINOR 1 + #define CFG_CODEBASE_VERSION_REVISION 0 +/*=========================================================================*/ + + +/*========================================================================= + FIRMWARE VERSION SETTINGS + -----------------------------------------------------------------------*/ + #define CFG_FIRMWARE_VERSION_MAJOR 0 + #define CFG_FIRMWARE_VERSION_MINOR 0 + #define CFG_FIRMWARE_VERSION_REVISION 0 +/*=========================================================================*/ + + +/*========================================================================= + DEBUG LEVEL + ----------------------------------------------------------------------- + + CFG_DEBUG Level 3: Full debug output, any failed assert + will produce a breakpoint for the + debugger + Level 2: ATTR_ALWAYS_INLINE is null, ASSERT + has text + Level 1: ATTR_ALWAYS_INLINE is an attribute, + ASSERT has no text + Level 0: No debug information generated + + -----------------------------------------------------------------------*/ + #define CFG_DEBUG (2) + + #if (CFG_DEBUG > 3) || (CFG_DEBUG < 0) + #error "CFG_DEBUG must be a value between 0 (no debug) and 3" + #endif +/*=========================================================================*/ + + +/*========================================================================= + GENERAL NRF51 PERIPHERAL SETTINGS + ----------------------------------------------------------------------- + + CFG_SCHEDULER_ENABLE Set this to 'true' or 'false' depending on + if you use the event scheduler or not + + -----------------------------------------------------------------------*/ + #define CFG_SCHEDULER_ENABLE false + + /*------------------------------- GPIOTE ------------------------------*/ + #define CFG_GPIOTE_MAX_USERS 1 /**< Maximum number of users of the GPIOTE handler. */ + + /*-------------------------------- TIMER ------------------------------*/ + #define CFG_TIMER_PRESCALER 0 /**< Value of the RTC1 PRESCALER register. freq = (32768/(PRESCALER+1)) */ + #define CFG_TIMER_MAX_INSTANCE 8 /**< Maximum number of simultaneously created timers. */ + #define CFG_TIMER_OPERATION_QUEUE_SIZE 5 /**< Size of timer operation queues. */ +/*=========================================================================*/ + + +/*========================================================================= + BTLE SETTINGS + -----------------------------------------------------------------------*/ + + #define CFG_BLE_TX_POWER_LEVEL 4 /**< in dBm (Valid values are -40, -20, -16, -12, -8, -4, 0, 4) */ + + /*---------------------------- BOND MANAGER ---------------------------*/ + #define CFG_BLE_BOND_FLASH_PAGE_BOND (BLE_FLASH_PAGE_END-1) /**< Flash page used for bond manager bonding information.*/ + #define CFG_BLE_BOND_FLASH_PAGE_SYS_ATTR (BLE_FLASH_PAGE_END-3) /**< Flash page used for bond manager system attribute information. TODO check if we can use BLE_FLASH_PAGE_END-2*/ + #define CFG_BLE_BOND_DELETE_BUTTON_NUM 0 /**< Button to press to delete bond details during init */ + + /*------------------------------ SECURITY -----------------------------*/ + #define CFG_BLE_SEC_PARAM_MITM 0 /**< Man In The Middle protection not required. */ + #define CFG_BLE_SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_NONE /**< No I/O capabilities. */ + #define CFG_BLE_SEC_PARAM_OOB 0 /**< Out Of Band data not available. */ + #define CFG_BLE_SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */ + #define CFG_BLE_SEC_PARAM_MAX_KEY_SIZE 16 + + /*--------------------------------- GAP -------------------------------*/ + #define CFG_GAP_APPEARANCE BLE_APPEARANCE_GENERIC_TAG + #define CFG_GAP_LOCAL_NAME "nRF5x" + + #define CFG_GAP_CONNECTION_MIN_INTERVAL_MS 500 /**< Minimum acceptable connection interval */ + #define CFG_GAP_CONNECTION_MAX_INTERVAL_MS 1000 /**< Maximum acceptable connection interval */ + #define CFG_GAP_CONNECTION_SUPERVISION_TIMEOUT_MS 4000 /**< Connection supervisory timeout */ + #define CFG_GAP_CONNECTION_SLAVE_LATENCY 0 /**< Slave Latency in number of connection events. */ + + #define CFG_GAP_ADV_INTERVAL_MS 25 /**< The advertising interval in miliseconds, should be multiply of 0.625 */ + #define CFG_GAP_ADV_TIMEOUT_S 180 /**< The advertising timeout in units of seconds. */ +/*=========================================================================*/ + + +/*========================================================================= + VALIDATION + -----------------------------------------------------------------------*/ + #if CFG_BLE_TX_POWER_LEVEL != -40 && CFG_BLE_TX_POWER_LEVEL != -20 && CFG_BLE_TX_POWER_LEVEL != -16 && CFG_BLE_TX_POWER_LEVEL != -12 && CFG_BLE_TX_POWER_LEVEL != -8 && CFG_BLE_TX_POWER_LEVEL != -4 && CFG_BLE_TX_POWER_LEVEL != 0 && CFG_BLE_TX_POWER_LEVEL != 4 + #error "CFG_BLE_TX_POWER_LEVEL must be -40, -20, -16, -12, -8, -4, 0 or 4" + #endif +/*=========================================================================*/ + +#endif /* _PROJECTCONFIG_H_ */
diff -r 000000000000 -r 637031152314 DS1820.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DS1820.lib Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/users/Sissors/code/DS1820/#196e9e54b033
diff -r 000000000000 -r 637031152314 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,101 @@
+/*----------------------------------------------------------------------------
+LAB EXERCISE - BLE Thermometer
+ ----------------------------------------
+ In this exercise you will write a program which will turn your board into
+ a BLE thermometer. You will be able to check the temperature with any device
+ that can read BLE temperature readings.
+
+ GOOD LUCK!
+ *----------------------------------------------------------------------------*/
+
+#include "mbed.h"
+#include "DS1820.h"
+#include "nRF51822n.h"
+
+nRF51822n nrf;
+DS1820 probe(P0_20);
+//AnalogIn LM35(P0_2); // Uncomment for analog LM35 sensor from Maplin
+Ticker oneSec;
+
+// LEDs for indication
+DigitalOut oneSecLed(LED1);
+DigitalOut adStateLed(LED2);
+
+const static char deviceName[] = "** Temperature Sensor **";
+
+// Health Thermometer Service
+uint8_t tempSensorPayload[5] = { 0, 0, 0, 0, 0 };
+GattService tempSensorService (GattService::UUID_HEALTH_THERMOMETER_SERVICE);
+GattCharacteristic tempSensorChar (GattCharacteristic::UUID_TEMPERATURE_MEASUREMENT_CHAR, 5, 5, GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_INDICATE);
+
+// Advertising data and parameters
+GapAdvertisingData advData;
+GapAdvertisingData scanResponse;
+GapAdvertisingParams advParams ( GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED );
+
+// Function constructors
+uint32_t quick_ieee11073_from_float(float temperature);
+void updateTemp(void);
+
+class GapEventHandler : public GapEvents {
+ // When a client device connects we need to turn off the advertising LED
+ virtual void onConnected(void){
+ adStateLed = 0;
+ }
+
+ // When a client device disconnects we need to start advertising again
+ virtual void onDisconnected(void) {
+ nrf.getGap().startAdvertising(advParams);
+ adStateLed = 1;
+ }
+};
+
+
+int main(void){
+
+ // Start the one second ticker
+ oneSec.attach(updateTemp, 1);
+
+ nrf.getGap().setEventHandler(new GapEventHandler());
+
+ // Start the BLE radio
+ nrf.init();
+ nrf.reset();
+
+ // Add GAP data, but don't start advertising
+ advData.addFlags((GapAdvertisingData::Flags)(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE));
+ advData.addData(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t*)deviceName, sizeof(deviceName));
+ advData.addAppearance(GapAdvertisingData::GENERIC_THERMOMETER);
+ nrf.getGap().setAdvertisingData(advData, scanResponse);
+
+ // Temperature Sensor Service
+ tempSensorService.addCharacteristic(tempSensorChar);
+ nrf.getGattServer().addService(tempSensorService);
+
+ // Finally start advertising (can't start advertising before all services are added)
+ nrf.getGap().startAdvertising(advParams);
+ adStateLed = 1;
+
+ while(1){
+ }
+}
+
+// Update temperature
+void updateTemp(void){
+ oneSecLed = !oneSecLed;
+
+ probe.convertTemperature(true, DS1820::all_devices); // initialise DS1820 digital temperature sensor
+ float temperature = probe.temperature(); // obtain reading
+ //float temperature = ((LM35*3.3)-0.600)*100.0; // for use with analog LM35 sensor from Maplin
+ uint32_t temp_ieee11073 = quick_ieee11073_from_float(temperature);
+ memcpy(tempSensorPayload+1, &temp_ieee11073, 4);
+ nrf.getGattServer().updateValue(tempSensorChar.handle, tempSensorPayload, sizeof(tempSensorPayload));
+}
+
+// Quick conversion to an IEEE11073 format
+uint32_t quick_ieee11073_from_float(float temperature){
+ uint8_t exponent = 0xFF;
+ uint32_t mantissa = (uint32_t)(temperature*10);
+ return ( ((uint32_t)exponent) << 24) | mantissa;
+}
+
diff -r 000000000000 -r 637031152314 mbed/AnalogIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/AnalogIn.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGIN_H
+#define MBED_ANALOGIN_H
+
+#include "platform.h"
+
+#if DEVICE_ANALOGIN
+
+#include "analogin_api.h"
+
+namespace mbed {
+
+/** An analog input, used for reading the voltage on a pin
+ *
+ * Example:
+ * @code
+ * // Print messages when the AnalogIn is greater than 50%
+ *
+ * #include "mbed.h"
+ *
+ * AnalogIn temperature(p20);
+ *
+ * int main() {
+ * while(1) {
+ * if(temperature > 0.5) {
+ * printf("Too hot! (%f)", temperature.read());
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class AnalogIn {
+
+public:
+
+ /** Create an AnalogIn, connected to the specified pin
+ *
+ * @param pin AnalogIn pin to connect to
+ * @param name (optional) A string to identify the object
+ */
+ AnalogIn(PinName pin) {
+ analogin_init(&_adc, pin);
+ }
+
+ /** Read the input voltage, represented as a float in the range [0.0, 1.0]
+ *
+ * @returns A floating-point value representing the current input voltage, measured as a percentage
+ */
+ float read() {
+ return analogin_read(&_adc);
+ }
+
+ /** Read the input voltage, represented as an unsigned short in the range [0x0, 0xFFFF]
+ *
+ * @returns
+ * 16-bit unsigned short representing the current input voltage, normalised to a 16-bit value
+ */
+ unsigned short read_u16() {
+ return analogin_read_u16(&_adc);
+ }
+
+#ifdef MBED_OPERATORS
+ /** An operator shorthand for read()
+ *
+ * The float() operator can be used as a shorthand for read() to simplify common code sequences
+ *
+ * Example:
+ * @code
+ * float x = volume.read();
+ * float x = volume;
+ *
+ * if(volume.read() > 0.25) { ... }
+ * if(volume > 0.25) { ... }
+ * @endcode
+ */
+ operator float() {
+ return read();
+ }
+#endif
+
+protected:
+ analogin_t _adc;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/AnalogOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/AnalogOut.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,121 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGOUT_H
+#define MBED_ANALOGOUT_H
+
+#include "platform.h"
+
+#if DEVICE_ANALOGOUT
+
+#include "analogout_api.h"
+
+namespace mbed {
+
+/** An analog output, used for setting the voltage on a pin
+ *
+ * Example:
+ * @code
+ * // Make a sawtooth output
+ *
+ * #include "mbed.h"
+ *
+ * AnalogOut tri(p18);
+ * int main() {
+ * while(1) {
+ * tri = tri + 0.01;
+ * wait_us(1);
+ * if(tri == 1) {
+ * tri = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class AnalogOut {
+
+public:
+
+ /** Create an AnalogOut connected to the specified pin
+ *
+ * @param AnalogOut pin to connect to (18)
+ */
+ AnalogOut(PinName pin) {
+ analogout_init(&_dac, pin);
+ }
+
+ /** Set the output voltage, specified as a percentage (float)
+ *
+ * @param value A floating-point value representing the output voltage,
+ * specified as a percentage. The value should lie between
+ * 0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%).
+ * Values outside this range will be saturated to 0.0f or 1.0f.
+ */
+ void write(float value) {
+ analogout_write(&_dac, value);
+ }
+
+ /** Set the output voltage, represented as an unsigned short in the range [0x0, 0xFFFF]
+ *
+ * @param value 16-bit unsigned short representing the output voltage,
+ * normalised to a 16-bit value (0x0000 = 0v, 0xFFFF = 3.3v)
+ */
+ void write_u16(unsigned short value) {
+ analogout_write_u16(&_dac, value);
+ }
+
+ /** Return the current output voltage setting, measured as a percentage (float)
+ *
+ * @returns
+ * A floating-point value representing the current voltage being output on the pin,
+ * measured as a percentage. The returned value will lie between
+ * 0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%).
+ *
+ * @note
+ * This value may not match exactly the value set by a previous write().
+ */
+ float read() {
+ return analogout_read(&_dac);
+ }
+
+#ifdef MBED_OPERATORS
+ /** An operator shorthand for write()
+ */
+ AnalogOut& operator= (float percent) {
+ write(percent);
+ return *this;
+ }
+
+ AnalogOut& operator= (AnalogOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** An operator shorthand for read()
+ */
+ operator float() {
+ return read();
+ }
+#endif
+
+protected:
+ dac_t _dac;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/BusIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/BusIn.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,67 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSIN_H
+#define MBED_BUSIN_H
+
+#include "platform.h"
+#include "DigitalIn.h"
+
+namespace mbed {
+
+/** A digital input bus, used for reading the state of a collection of pins
+ */
+class BusIn {
+
+public:
+ /* Group: Configuration Methods */
+
+ /** Create an BusIn, connected to the specified pins
+ *
+ * @param <n> DigitalIn pin to connect to bus bit <n> (p5-p30, NC)
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusIn(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusIn(PinName pins[16]);
+
+ virtual ~BusIn();
+
+ /** Read the value of the input bus
+ *
+ * @returns
+ * An integer with each bit corresponding to the value read from the associated DigitalIn pin
+ */
+ int read();
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for read()
+ */
+ operator int();
+#endif
+
+protected:
+ DigitalIn* _pin[16];
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/BusInOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/BusInOut.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSINOUT_H
+#define MBED_BUSINOUT_H
+
+#include "DigitalInOut.h"
+
+namespace mbed {
+
+/** A digital input output bus, used for setting the state of a collection of pins
+ */
+class BusInOut {
+
+public:
+
+ /** Create an BusInOut, connected to the specified pins
+ *
+ * @param p<n> DigitalInOut pin to connect to bus bit p<n> (p5-p30, NC)
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusInOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusInOut(PinName pins[16]);
+
+ virtual ~BusInOut();
+
+ /* Group: Access Methods */
+
+ /** Write the value to the output bus
+ *
+ * @param value An integer specifying a bit to write for every corresponding DigitalInOut pin
+ */
+ void write(int value);
+
+
+ /** Read the value currently output on the bus
+ *
+ * @returns
+ * An integer with each bit corresponding to associated DigitalInOut pin setting
+ */
+ int read();
+
+ /** Set as an output
+ */
+ void output();
+
+ /** Set as an input
+ */
+ void input();
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for write()
+ */
+ BusInOut& operator= (int v);
+ BusInOut& operator= (BusInOut& rhs);
+
+ /** A shorthand for read()
+ */
+ operator int();
+#endif
+
+protected:
+ DigitalInOut* _pin[16];
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/BusOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/BusOut.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,76 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSOUT_H
+#define MBED_BUSOUT_H
+
+#include "DigitalOut.h"
+
+namespace mbed {
+
+/** A digital output bus, used for setting the state of a collection of pins
+ */
+class BusOut {
+
+public:
+
+ /** Create an BusOut, connected to the specified pins
+ *
+ * @param p<n> DigitalOut pin to connect to bus bit <n> (p5-p30, NC)
+ *
+ * @note
+ * It is only required to specify as many pin variables as is required
+ * for the bus; the rest will default to NC (not connected)
+ */
+ BusOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+ PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+ PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+ PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+ BusOut(PinName pins[16]);
+
+ virtual ~BusOut();
+
+ /** Write the value to the output bus
+ *
+ * @param value An integer specifying a bit to write for every corresponding DigitalOut pin
+ */
+ void write(int value);
+
+ /** Read the value currently output on the bus
+ *
+ * @returns
+ * An integer with each bit corresponding to associated DigitalOut pin setting
+ */
+ int read();
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for write()
+ */
+ BusOut& operator= (int v);
+ BusOut& operator= (BusOut& rhs);
+
+ /** A shorthand for read()
+ */
+ operator int();
+#endif
+
+protected:
+ DigitalOut* _pin[16];
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/CAN.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/CAN.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,243 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_H
+#define MBED_CAN_H
+
+#include "platform.h"
+
+#if DEVICE_CAN
+
+#include "can_api.h"
+#include "can_helper.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** CANMessage class
+ */
+class CANMessage : public CAN_Message {
+
+public:
+ /** Creates empty CAN message.
+ */
+ CANMessage() {
+ len = 8;
+ type = CANData;
+ format = CANStandard;
+ id = 0;
+ memset(data, 0, 8);
+ }
+
+ /** Creates CAN message with specific content.
+ */
+ CANMessage(int _id, const char *_data, char _len = 8, CANType _type = CANData, CANFormat _format = CANStandard) {
+ len = _len & 0xF;
+ type = _type;
+ format = _format;
+ id = _id;
+ memcpy(data, _data, _len);
+ }
+
+ /** Creates CAN remote message.
+ */
+ CANMessage(int _id, CANFormat _format = CANStandard) {
+ len = 0;
+ type = CANRemote;
+ format = _format;
+ id = _id;
+ memset(data, 0, 8);
+ }
+};
+
+/** A can bus client, used for communicating with can devices
+ */
+class CAN {
+
+public:
+ /** Creates an CAN interface connected to specific pins.
+ *
+ * @param rd read from transmitter
+ * @param td transmit to transmitter
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * Ticker ticker;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ * CAN can1(p9, p10);
+ * CAN can2(p30, p29);
+ *
+ * char counter = 0;
+ *
+ * void send() {
+ * if(can1.write(CANMessage(1337, &counter, 1))) {
+ * printf("Message sent: %d\n", counter);
+ * counter++;
+ * }
+ * led1 = !led1;
+ * }
+ *
+ * int main() {
+ * ticker.attach(&send, 1);
+ * CANMessage msg;
+ * while(1) {
+ * if(can2.read(msg)) {
+ * printf("Message received: %d\n\n", msg.data[0]);
+ * led2 = !led2;
+ * }
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+ CAN(PinName rd, PinName td);
+ virtual ~CAN();
+
+ /** Set the frequency of the CAN interface
+ *
+ * @param hz The bus frequency in hertz
+ *
+ * @returns
+ * 1 if successful,
+ * 0 otherwise
+ */
+ int frequency(int hz);
+
+ /** Write a CANMessage to the bus.
+ *
+ * @param msg The CANMessage to write.
+ *
+ * @returns
+ * 0 if write failed,
+ * 1 if write was successful
+ */
+ int write(CANMessage msg);
+
+ /** Read a CANMessage from the bus.
+ *
+ * @param msg A CANMessage to read to.
+ * @param handle message filter handle (0 for any message)
+ *
+ * @returns
+ * 0 if no message arrived,
+ * 1 if message arrived
+ */
+ int read(CANMessage &msg, int handle = 0);
+
+ /** Reset CAN interface.
+ *
+ * To use after error overflow.
+ */
+ void reset();
+
+ /** Puts or removes the CAN interface into silent monitoring mode
+ *
+ * @param silent boolean indicating whether to go into silent mode or not
+ */
+ void monitor(bool silent);
+
+ enum Mode {
+ Reset = 0,
+ Normal,
+ Silent,
+ LocalTest,
+ GlobalTest,
+ SilentTest
+ };
+
+ /** Change CAN operation to the specified mode
+ *
+ * @param mode The new operation mode (CAN::Normal, CAN::Silent, CAN::LocalTest, CAN::GlobalTest, CAN::SilentTest)
+ *
+ * @returns
+ * 0 if mode change failed or unsupported,
+ * 1 if mode change was successful
+ */
+ int mode(Mode mode);
+
+ /** Filter out incomming messages
+ *
+ * @param id the id to filter on
+ * @param mask the mask applied to the id
+ * @param format format to filter on (Default CANAny)
+ * @param handle message filter handle (Optional)
+ *
+ * @returns
+ * 0 if filter change failed or unsupported,
+ * new filter handle if successful
+ */
+ int filter(unsigned int id, unsigned int mask, CANFormat format = CANAny, int handle = 0);
+
+ /** Returns number of read errors to detect read overflow errors.
+ */
+ unsigned char rderror();
+
+ /** Returns number of write errors to detect write overflow errors.
+ */
+ unsigned char tderror();
+
+ enum IrqType {
+ RxIrq = 0,
+ TxIrq,
+ EwIrq,
+ DoIrq,
+ WuIrq,
+ EpIrq,
+ AlIrq,
+ BeIrq,
+ IdIrq
+ };
+
+ /** Attach a function to call whenever a CAN frame received interrupt is
+ * generated.
+ *
+ * @param fptr A pointer to a void function, or 0 to set as none
+ * @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, CAN::TxIrq for transmitted or aborted, CAN::EwIrq for error warning, CAN::DoIrq for data overrun, CAN::WuIrq for wake-up, CAN::EpIrq for error passive, CAN::AlIrq for arbitration lost, CAN::BeIrq for bus error)
+ */
+ void attach(void (*fptr)(void), IrqType type=RxIrq);
+
+ /** Attach a member function to call whenever a CAN frame received interrupt
+ * is generated.
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, TxIrq for transmitted or aborted, EwIrq for error warning, DoIrq for data overrun, WuIrq for wake-up, EpIrq for error passive, AlIrq for arbitration lost, BeIrq for bus error)
+ */
+ template<typename T>
+ void attach(T* tptr, void (T::*mptr)(void), IrqType type=RxIrq) {
+ if((mptr != NULL) && (tptr != NULL)) {
+ _irq[type].attach(tptr, mptr);
+ can_irq_set(&_can, (CanIrqType)type, 1);
+ }
+ else {
+ can_irq_set(&_can, (CanIrqType)type, 0);
+ }
+ }
+
+ static void _irq_handler(uint32_t id, CanIrqType type);
+
+protected:
+ can_t _can;
+ FunctionPointer _irq[9];
+};
+
+} // namespace mbed
+
+#endif
+
+#endif // MBED_CAN_H
diff -r 000000000000 -r 637031152314 mbed/CallChain.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/CallChain.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,176 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CALLCHAIN_H
+#define MBED_CALLCHAIN_H
+
+#include "FunctionPointer.h"
+#include <string.h>
+
+namespace mbed {
+
+/** Group one or more functions in an instance of a CallChain, then call them in
+ * sequence using CallChain::call(). Used mostly by the interrupt chaining code,
+ * but can be used for other purposes.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * CallChain chain;
+ *
+ * void first(void) {
+ * printf("'first' function.\n");
+ * }
+ *
+ * void second(void) {
+ * printf("'second' function.\n");
+ * }
+ *
+ * class Test {
+ * public:
+ * void f(void) {
+ * printf("A::f (class member).\n");
+ * }
+ * };
+ *
+ * int main() {
+ * Test test;
+ *
+ * chain.add(second);
+ * chain.add_front(first);
+ * chain.add(&test, &Test::f);
+ * chain.call();
+ * }
+ * @endcode
+ */
+
+typedef FunctionPointer* pFunctionPointer_t;
+
+class CallChain {
+public:
+ /** Create an empty chain
+ *
+ * @param size (optional) Initial size of the chain
+ */
+ CallChain(int size = 4);
+ virtual ~CallChain();
+
+ /** Add a function at the end of the chain
+ *
+ * @param function A pointer to a void function
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add(void (*function)(void));
+
+ /** Add a function at the end of the chain
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add(T *tptr, void (T::*mptr)(void)) {
+ return common_add(new FunctionPointer(tptr, mptr));
+ }
+
+ /** Add a function at the beginning of the chain
+ *
+ * @param function A pointer to a void function
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add_front(void (*function)(void));
+
+ /** Add a function at the beginning of the chain
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add_front(T *tptr, void (T::*mptr)(void)) {
+ return common_add_front(new FunctionPointer(tptr, mptr));
+ }
+
+ /** Get the number of functions in the chain
+ */
+ int size() const;
+
+ /** Get a function object from the chain
+ *
+ * @param i function object index
+ *
+ * @returns
+ * The function object at position 'i' in the chain
+ */
+ pFunctionPointer_t get(int i) const;
+
+ /** Look for a function object in the call chain
+ *
+ * @param f the function object to search
+ *
+ * @returns
+ * The index of the function object if found, -1 otherwise.
+ */
+ int find(pFunctionPointer_t f) const;
+
+ /** Clear the call chain (remove all functions in the chain).
+ */
+ void clear();
+
+ /** Remove a function object from the chain
+ *
+ * @arg f the function object to remove
+ *
+ * @returns
+ * true if the function object was found and removed, false otherwise.
+ */
+ bool remove(pFunctionPointer_t f);
+
+ /** Call all the functions in the chain in sequence
+ */
+ void call();
+
+#ifdef MBED_OPERATORS
+ void operator ()(void) {
+ call();
+ }
+ pFunctionPointer_t operator [](int i) const {
+ return get(i);
+ }
+#endif
+
+private:
+ void _check_size();
+ pFunctionPointer_t common_add(pFunctionPointer_t pf);
+ pFunctionPointer_t common_add_front(pFunctionPointer_t pf);
+
+ pFunctionPointer_t* _chain;
+ int _size;
+ int _elements;
+};
+
+} // namespace mbed
+
+#endif
+
diff -r 000000000000 -r 637031152314 mbed/DigitalIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/DigitalIn.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,90 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALIN_H
+#define MBED_DIGITALIN_H
+
+#include "platform.h"
+
+#include "gpio_api.h"
+
+namespace mbed {
+
+/** A digital input, used for reading the state of a pin
+ *
+ * Example:
+ * @code
+ * // Flash an LED while a DigitalIn is true
+ *
+ * #include "mbed.h"
+ *
+ * DigitalIn enable(p5);
+ * DigitalOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * if(enable) {
+ * led = !led;
+ * }
+ * wait(0.25);
+ * }
+ * }
+ * @endcode
+ */
+class DigitalIn {
+
+public:
+ /** Create a DigitalIn connected to the specified pin
+ *
+ * @param pin DigitalIn pin to connect to
+ * @param name (optional) A string to identify the object
+ */
+ DigitalIn(PinName pin) {
+ gpio_init(&gpio, pin, PIN_INPUT);
+ }
+
+ /** Read the input, represented as 0 or 1 (int)
+ *
+ * @returns
+ * An integer representing the state of the input pin,
+ * 0 for logical 0, 1 for logical 1
+ */
+ int read() {
+ return gpio_read(&gpio);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode pull) {
+ gpio_mode(&gpio, pull);
+ }
+
+#ifdef MBED_OPERATORS
+ /** An operator shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+#endif
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/DigitalInOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/DigitalInOut.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALINOUT_H
+#define MBED_DIGITALINOUT_H
+
+#include "platform.h"
+
+#include "gpio_api.h"
+
+namespace mbed {
+
+/** A digital input/output, used for setting or reading a bi-directional pin
+ */
+class DigitalInOut {
+
+public:
+ /** Create a DigitalInOut connected to the specified pin
+ *
+ * @param pin DigitalInOut pin to connect to
+ */
+ DigitalInOut(PinName pin) {
+ gpio_init(&gpio, pin, PIN_INPUT);
+ }
+
+ /** Set the output, specified as 0 or 1 (int)
+ *
+ * @param value An integer specifying the pin output value,
+ * 0 for logical 0, 1 (or any other non-zero value) for logical 1
+ */
+ void write(int value) {
+ gpio_write(&gpio, value);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * an integer representing the output setting of the pin if it is an output,
+ * or read the input if set as an input
+ */
+ int read() {
+ return gpio_read(&gpio);
+ }
+
+ /** Set as an output
+ */
+ void output() {
+ gpio_dir(&gpio, PIN_OUTPUT);
+ }
+
+ /** Set as an input
+ */
+ void input() {
+ gpio_dir(&gpio, PIN_INPUT);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode pull) {
+ gpio_mode(&gpio, pull);
+ }
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for write()
+ */
+ DigitalInOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ DigitalInOut& operator= (DigitalInOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+#endif
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/DigitalOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/DigitalOut.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,97 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALOUT_H
+#define MBED_DIGITALOUT_H
+
+#include "platform.h"
+#include "gpio_api.h"
+
+namespace mbed {
+
+/** A digital output, used for setting the state of a pin
+ *
+ * Example:
+ * @code
+ * // Toggle a LED
+ * #include "mbed.h"
+ *
+ * DigitalOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * led = !led;
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class DigitalOut {
+
+public:
+ /** Create a DigitalOut connected to the specified pin
+ *
+ * @param pin DigitalOut pin to connect to
+ */
+ DigitalOut(PinName pin) {
+ gpio_init(&gpio, pin, PIN_OUTPUT);
+ }
+
+ /** Set the output, specified as 0 or 1 (int)
+ *
+ * @param value An integer specifying the pin output value,
+ * 0 for logical 0, 1 (or any other non-zero value) for logical 1
+ */
+ void write(int value) {
+ gpio_write(&gpio, value);
+ }
+
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * an integer representing the output setting of the pin,
+ * 0 for logical 0, 1 for logical 1
+ */
+ int read() {
+ return gpio_read(&gpio);
+ }
+
+#ifdef MBED_OPERATORS
+ /** A shorthand for write()
+ */
+ DigitalOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ DigitalOut& operator= (DigitalOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+#endif
+
+protected:
+ gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/DirHandle.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/DirHandle.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIRHANDLE_H
+#define MBED_DIRHANDLE_H
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+# define NAME_MAX 255
+typedef int mode_t;
+
+#else
+# include <sys/syslimits.h>
+#endif
+
+#include "FileHandle.h"
+
+struct dirent {
+ char d_name[NAME_MAX+1];
+};
+
+namespace mbed {
+
+/** Represents a directory stream. Objects of this type are returned
+ * by a FileSystemLike's opendir method. Implementations must define
+ * at least closedir, readdir and rewinddir.
+ *
+ * If a FileSystemLike class defines the opendir method, then the
+ * directories of an object of that type can be accessed by
+ * DIR *d = opendir("/example/directory") (or opendir("/example")
+ * to open the root of the filesystem), and then using readdir(d) etc.
+ *
+ * The root directory is considered to contain all FileLike and
+ * FileSystemLike objects, so the DIR* returned by opendir("/") will
+ * reflect this.
+ */
+class DirHandle {
+
+public:
+ /** Closes the directory.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on error.
+ */
+ virtual int closedir()=0;
+
+ /** Return the directory entry at the current position, and
+ * advances the position to the next entry.
+ *
+ * @returns
+ * A pointer to a dirent structure representing the
+ * directory entry at the current position, or NULL on reaching
+ * end of directory or error.
+ */
+ virtual struct dirent *readdir()=0;
+
+ /** Resets the position to the beginning of the directory.
+ */
+ virtual void rewinddir()=0;
+
+ /** Returns the current position of the DirHandle.
+ *
+ * @returns
+ * the current position,
+ * -1 on error.
+ */
+ virtual off_t telldir() { return -1; }
+
+ /** Sets the position of the DirHandle.
+ *
+ * @param location The location to seek to. Must be a value returned by telldir.
+ */
+ virtual void seekdir(off_t location) { }
+
+ virtual ~DirHandle() {}
+};
+
+} // namespace mbed
+
+typedef mbed::DirHandle DIR;
+
+extern "C" {
+ DIR *opendir(const char*);
+ struct dirent *readdir(DIR *);
+ int closedir(DIR*);
+ void rewinddir(DIR*);
+ long telldir(DIR*);
+ void seekdir(DIR*, long);
+ int mkdir(const char *name, mode_t n);
+};
+
+#endif /* MBED_DIRHANDLE_H */
diff -r 000000000000 -r 637031152314 mbed/Ethernet.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/Ethernet.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,170 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ETHERNET_H
+#define MBED_ETHERNET_H
+
+#include "platform.h"
+
+#if DEVICE_ETHERNET
+
+namespace mbed {
+
+/** An ethernet interface, to use with the ethernet pins.
+ *
+ * Example:
+ * @code
+ * // Read destination and source from every ethernet packet
+ *
+ * #include "mbed.h"
+ *
+ * Ethernet eth;
+ *
+ * int main() {
+ * char buf[0x600];
+ *
+ * while(1) {
+ * int size = eth.receive();
+ * if(size > 0) {
+ * eth.read(buf, size);
+ * printf("Destination: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ * buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+ * printf("Source: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ * buf[6], buf[7], buf[8], buf[9], buf[10], buf[11]);
+ * }
+ *
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+class Ethernet {
+
+public:
+
+ /** Initialise the ethernet interface.
+ */
+ Ethernet();
+
+ /** Powers the hardware down.
+ */
+ virtual ~Ethernet();
+
+ enum Mode {
+ AutoNegotiate,
+ HalfDuplex10,
+ FullDuplex10,
+ HalfDuplex100,
+ FullDuplex100
+ };
+
+ /** Writes into an outgoing ethernet packet.
+ *
+ * It will append size bytes of data to the previously written bytes.
+ *
+ * @param data An array to write.
+ * @param size The size of data.
+ *
+ * @returns
+ * The number of written bytes.
+ */
+ int write(const char *data, int size);
+
+ /** Send an outgoing ethernet packet.
+ *
+ * After filling in the data in an ethernet packet it must be send.
+ * Send will provide a new packet to write to.
+ *
+ * @returns
+ * 0 if the sending was failed,
+ * or the size of the packet successfully sent.
+ */
+ int send();
+
+ /** Recevies an arrived ethernet packet.
+ *
+ * Receiving an ethernet packet will drop the last received ethernet packet
+ * and make a new ethernet packet ready to read.
+ * If no ethernet packet is arrived it will return 0.
+ *
+ * @returns
+ * 0 if no ethernet packet is arrived,
+ * or the size of the arrived packet.
+ */
+ int receive();
+
+ /** Read from an recevied ethernet packet.
+ *
+ * After receive returnd a number bigger than 0it is
+ * possible to read bytes from this packet.
+ * Read will write up to size bytes into data.
+ *
+ * It is possible to use read multible times.
+ * Each time read will start reading after the last read byte before.
+ *
+ * @returns
+ * The number of byte read.
+ */
+ int read(char *data, int size);
+
+ /** Gives the ethernet address of the mbed.
+ *
+ * @param mac Must be a pointer to a 6 byte char array to copy the ethernet address in.
+ */
+ void address(char *mac);
+
+ /** Returns if an ethernet link is pressent or not. It takes a wile after Ethernet initializion to show up.
+ *
+ * @returns
+ * 0 if no ethernet link is pressent,
+ * 1 if an ethernet link is pressent.
+ *
+ * Example:
+ * @code
+ * // Using the Ethernet link function
+ * #include "mbed.h"
+ *
+ * Ethernet eth;
+ *
+ * int main() {
+ * wait(1); // Needed after startup.
+ * if (eth.link()) {
+ * printf("online\n");
+ * } else {
+ * printf("offline\n");
+ * }
+ * }
+ * @endcode
+ */
+ int link();
+
+ /** Sets the speed and duplex parameters of an ethernet link
+ *
+ * - AutoNegotiate Auto negotiate speed and duplex
+ * - HalfDuplex10 10 Mbit, half duplex
+ * - FullDuplex10 10 Mbit, full duplex
+ * - HalfDuplex100 100 Mbit, half duplex
+ * - FullDuplex100 100 Mbit, full duplex
+ *
+ * @param mode the speed and duplex mode to set the link to:
+ */
+ void set_link(Mode mode);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/FileBase.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/FileBase.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,75 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEBASE_H
+#define MBED_FILEBASE_H
+
+typedef int FILEHANDLE;
+
+#include <stdio.h>
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+# define O_RDONLY 0
+# define O_WRONLY 1
+# define O_RDWR 2
+# define O_CREAT 0x0200
+# define O_TRUNC 0x0400
+# define O_APPEND 0x0008
+
+# define NAME_MAX 255
+
+typedef int mode_t;
+typedef int ssize_t;
+typedef long off_t;
+
+#else
+# include <sys/fcntl.h>
+# include <sys/types.h>
+# include <sys/syslimits.h>
+#endif
+
+#include "platform.h"
+
+namespace mbed {
+
+typedef enum {
+ FilePathType,
+ FileSystemPathType
+} PathType;
+
+class FileBase {
+public:
+ FileBase(const char *name, PathType t);
+
+ virtual ~FileBase();
+
+ const char* getName(void);
+ PathType getPathType(void);
+
+ static FileBase *lookup(const char *name, unsigned int len);
+
+ static FileBase *get(int n);
+
+protected:
+ static FileBase *_head;
+
+ FileBase *_next;
+ const char *_name;
+ PathType _path_type;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/FileHandle.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/FileHandle.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,119 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEHANDLE_H
+#define MBED_FILEHANDLE_H
+
+typedef int FILEHANDLE;
+
+#include <stdio.h>
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+typedef int ssize_t;
+typedef long off_t;
+
+#else
+# include <sys/types.h>
+#endif
+
+namespace mbed {
+
+/** An OO equivalent of the internal FILEHANDLE variable
+ * and associated _sys_* functions.
+ *
+ * FileHandle is an abstract class, needing at least sys_write and
+ * sys_read to be implmented for a simple interactive device.
+ *
+ * No one ever directly tals to/instanciates a FileHandle - it gets
+ * created by FileSystem, and wrapped up by stdio.
+ */
+class FileHandle {
+
+public:
+ /** Write the contents of a buffer to the file
+ *
+ * @param buffer the buffer to write from
+ * @param length the number of characters to write
+ *
+ * @returns
+ * The number of characters written (possibly 0) on success, -1 on error.
+ */
+ virtual ssize_t write(const void* buffer, size_t length) = 0;
+
+ /** Close the file
+ *
+ * @returns
+ * Zero on success, -1 on error.
+ */
+ virtual int close() = 0;
+
+ /** Function read
+ * Reads the contents of the file into a buffer
+ *
+ * @param buffer the buffer to read in to
+ * @param length the number of characters to read
+ *
+ * @returns
+ * The number of characters read (zero at end of file) on success, -1 on error.
+ */
+ virtual ssize_t read(void* buffer, size_t length) = 0;
+
+ /** Check if the handle is for a interactive terminal device.
+ * If so, line buffered behaviour is used by default
+ *
+ * @returns
+ * 1 if it is a terminal,
+ * 0 otherwise
+ */
+ virtual int isatty() = 0;
+
+ /** Move the file position to a given offset from a given location.
+ *
+ * @param offset The offset from whence to move to
+ * @param whence SEEK_SET for the start of the file, SEEK_CUR for the
+ * current file position, or SEEK_END for the end of the file.
+ *
+ * @returns
+ * new file position on success,
+ * -1 on failure or unsupported
+ */
+ virtual off_t lseek(off_t offset, int whence) = 0;
+
+ /** Flush any buffers associated with the FileHandle, ensuring it
+ * is up to date on disk
+ *
+ * @returns
+ * 0 on success or un-needed,
+ * -1 on error
+ */
+ virtual int fsync() = 0;
+
+ virtual off_t flen() {
+ /* remember our current position */
+ off_t pos = lseek(0, SEEK_CUR);
+ if(pos == -1) return -1;
+ /* seek to the end to get the file length */
+ off_t res = lseek(0, SEEK_END);
+ /* return to our old position */
+ lseek(pos, SEEK_SET);
+ return res;
+ }
+
+ virtual ~FileHandle();
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/FileLike.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/FileLike.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,44 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILELIKE_H
+#define MBED_FILELIKE_H
+
+#include "FileBase.h"
+#include "FileHandle.h"
+
+namespace mbed {
+
+/* Class FileLike
+ * A file-like object is one that can be opened with fopen by
+ * fopen("/name", mode). It is intersection of the classes Base and
+ * FileHandle.
+ */
+class FileLike : public FileHandle, public FileBase {
+
+public:
+ /* Constructor FileLike
+ *
+ * Variables
+ * name - The name to use to open the file.
+ */
+ FileLike(const char *name);
+
+ virtual ~FileLike();
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/FilePath.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/FilePath.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,46 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEPATH_H
+#define MBED_FILEPATH_H
+
+#include "platform.h"
+
+#include "FileSystemLike.h"
+#include "FileLike.h"
+
+namespace mbed {
+
+class FilePath {
+public:
+ FilePath(const char* file_path);
+
+ const char* fileName(void);
+
+ bool isFileSystem(void);
+ FileSystemLike* fileSystem(void);
+
+ bool isFile(void);
+ FileLike* file(void);
+ bool exists(void);
+
+private:
+ const char* file_name;
+ FileBase* fb;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/FileSystemLike.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/FileSystemLike.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILESYSTEMLIKE_H
+#define MBED_FILESYSTEMLIKE_H
+
+#include "platform.h"
+
+#include "FileBase.h"
+#include "FileHandle.h"
+#include "DirHandle.h"
+
+namespace mbed {
+
+/** A filesystem-like object is one that can be used to open files
+ * though it by fopen("/name/filename", mode)
+ *
+ * Implementations must define at least open (the default definitions
+ * of the rest of the functions just return error values).
+ */
+class FileSystemLike : public FileBase {
+
+public:
+ /** FileSystemLike constructor
+ *
+ * @param name The name to use for the filesystem.
+ */
+ FileSystemLike(const char *name);
+
+ virtual ~FileSystemLike();
+
+ static DirHandle *opendir();
+ friend class BaseDirHandle;
+
+ /** Opens a file from the filesystem
+ *
+ * @param filename The name of the file to open.
+ * @param flags One of O_RDONLY, O_WRONLY, or O_RDWR, OR'd with
+ * zero or more of O_CREAT, O_TRUNC, or O_APPEND.
+ *
+ * @returns
+ * A pointer to a FileHandle object representing the
+ * file on success, or NULL on failure.
+ */
+ virtual FileHandle *open(const char *filename, int flags) = 0;
+
+ /** Remove a file from the filesystem.
+ *
+ * @param filename the name of the file to remove.
+ * @param returns 0 on success, -1 on failure.
+ */
+ virtual int remove(const char *filename) { return -1; };
+
+ /** Rename a file in the filesystem.
+ *
+ * @param oldname the name of the file to rename.
+ * @param newname the name to rename it to.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on failure.
+ */
+ virtual int rename(const char *oldname, const char *newname) { return -1; };
+
+ /** Opens a directory in the filesystem and returns a DirHandle
+ * representing the directory stream.
+ *
+ * @param name The name of the directory to open.
+ *
+ * @returns
+ * A DirHandle representing the directory stream, or
+ * NULL on failure.
+ */
+ virtual DirHandle *opendir(const char *name) { return NULL; };
+
+ /** Creates a directory in the filesystem.
+ *
+ * @param name The name of the directory to create.
+ * @param mode The permissions to create the directory with.
+ *
+ * @returns
+ * 0 on success,
+ * -1 on failure.
+ */
+ virtual int mkdir(const char *name, mode_t mode) { return -1; }
+
+ // TODO other filesystem functions (mkdir, rm, rn, ls etc)
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/FunctionPointer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/FunctionPointer.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,94 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FUNCTIONPOINTER_H
+#define MBED_FUNCTIONPOINTER_H
+
+#include <string.h>
+
+namespace mbed {
+
+typedef void (*pvoidf_t)(void);
+
+/** A class for storing and calling a pointer to a static or member void function
+ */
+class FunctionPointer {
+public:
+
+ /** Create a FunctionPointer, attaching a static function
+ *
+ * @param function The void static function to attach (default is none)
+ */
+ FunctionPointer(void (*function)(void) = 0);
+
+ /** Create a FunctionPointer, attaching a member function
+ *
+ * @param object The object pointer to invoke the member function on (i.e. the this pointer)
+ * @param function The address of the void member function to attach
+ */
+ template<typename T>
+ FunctionPointer(T *object, void (T::*member)(void)) {
+ attach(object, member);
+ }
+
+ /** Attach a static function
+ *
+ * @param function The void static function to attach (default is none)
+ */
+ void attach(void (*function)(void) = 0);
+
+ /** Attach a member function
+ *
+ * @param object The object pointer to invoke the member function on (i.e. the this pointer)
+ * @param function The address of the void member function to attach
+ */
+ template<typename T>
+ void attach(T *object, void (T::*member)(void)) {
+ _object = static_cast<void*>(object);
+ memcpy(_member, (char*)&member, sizeof(member));
+ _membercaller = &FunctionPointer::membercaller<T>;
+ _function = 0;
+ }
+
+ /** Call the attached static or member function
+ */
+ void call();
+
+ pvoidf_t get_function() const {
+ return (pvoidf_t)_function;
+ }
+
+#ifdef MBED_OPERATORS
+ void operator ()(void);
+#endif
+
+private:
+ template<typename T>
+ static void membercaller(void *object, char *member) {
+ T* o = static_cast<T*>(object);
+ void (T::*m)(void);
+ memcpy((char*)&m, member, sizeof(m));
+ (o->*m)();
+ }
+
+ void (*_function)(void); // static function pointer - 0 if none attached
+ void *_object; // object this pointer - 0 if none attached
+ char _member[16]; // raw member function pointer storage - converted back by registered _membercaller
+ void (*_membercaller)(void*, char*); // registered membercaller function to convert back and call _member on _object
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/I2C.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/I2C.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,144 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_H
+#define MBED_I2C_H
+
+#include "platform.h"
+
+#if DEVICE_I2C
+
+#include "i2c_api.h"
+
+namespace mbed {
+
+/** An I2C Master, used for communicating with I2C slave devices
+ *
+ * Example:
+ * @code
+ * // Read from I2C slave at address 0x62
+ *
+ * #include "mbed.h"
+ *
+ * I2C i2c(p28, p27);
+ *
+ * int main() {
+ * int address = 0x62;
+ * char data[2];
+ * i2c.read(address, data, 2);
+ * }
+ * @endcode
+ */
+class I2C {
+
+public:
+ enum RxStatus {
+ NoData,
+ MasterGeneralCall,
+ MasterWrite,
+ MasterRead
+ };
+
+ enum Acknowledge {
+ NoACK = 0,
+ ACK = 1
+ };
+
+ /** Create an I2C Master interface, connected to the specified pins
+ *
+ * @param sda I2C data line pin
+ * @param scl I2C clock line pin
+ */
+ I2C(PinName sda, PinName scl);
+
+ /** Set the frequency of the I2C interface
+ *
+ * @param hz The bus frequency in hertz
+ */
+ void frequency(int hz);
+
+ /** Read from an I2C slave
+ *
+ * Performs a complete read transaction. The bottom bit of
+ * the address is forced to 1 to indicate a read.
+ *
+ * @param address 8-bit I2C slave address [ addr | 1 ]
+ * @param data Pointer to the byte-array to read data in to
+ * @param length Number of bytes to read
+ * @param repeated Repeated start, true - don't send stop at end
+ *
+ * @returns
+ * 0 on success (ack),
+ * non-0 on failure (nack)
+ */
+ int read(int address, char *data, int length, bool repeated = false);
+
+ /** Read a single byte from the I2C bus
+ *
+ * @param ack indicates if the byte is to be acknowledged (1 = acknowledge)
+ *
+ * @returns
+ * the byte read
+ */
+ int read(int ack);
+
+ /** Write to an I2C slave
+ *
+ * Performs a complete write transaction. The bottom bit of
+ * the address is forced to 0 to indicate a write.
+ *
+ * @param address 8-bit I2C slave address [ addr | 0 ]
+ * @param data Pointer to the byte-array data to send
+ * @param length Number of bytes to send
+ * @param repeated Repeated start, true - do not send stop at end
+ *
+ * @returns
+ * 0 on success (ack),
+ * non-0 on failure (nack)
+ */
+ int write(int address, const char *data, int length, bool repeated = false);
+
+ /** Write single byte out on the I2C bus
+ *
+ * @param data data to write out on bus
+ *
+ * @returns
+ * '1' if an ACK was received,
+ * '0' otherwise
+ */
+ int write(int data);
+
+ /** Creates a start condition on the I2C bus
+ */
+
+ void start(void);
+
+ /** Creates a stop condition on the I2C bus
+ */
+ void stop(void);
+
+protected:
+ void aquire();
+
+ i2c_t _i2c;
+ static I2C *_owner;
+ int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/I2CSlave.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/I2CSlave.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,154 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_SLAVE_H
+#define MBED_I2C_SLAVE_H
+
+#include "platform.h"
+
+#if DEVICE_I2CSLAVE
+
+#include "i2c_api.h"
+
+namespace mbed {
+
+/** An I2C Slave, used for communicating with an I2C Master device
+ *
+ * Example:
+ * @code
+ * // Simple I2C responder
+ * #include <mbed.h>
+ *
+ * I2CSlave slave(p9, p10);
+ *
+ * int main() {
+ * char buf[10];
+ * char msg[] = "Slave!";
+ *
+ * slave.address(0xA0);
+ * while (1) {
+ * int i = slave.receive();
+ * switch (i) {
+ * case I2CSlave::ReadAddressed:
+ * slave.write(msg, strlen(msg) + 1); // Includes null char
+ * break;
+ * case I2CSlave::WriteGeneral:
+ * slave.read(buf, 10);
+ * printf("Read G: %s\n", buf);
+ * break;
+ * case I2CSlave::WriteAddressed:
+ * slave.read(buf, 10);
+ * printf("Read A: %s\n", buf);
+ * break;
+ * }
+ * for(int i = 0; i < 10; i++) buf[i] = 0; // Clear buffer
+ * }
+ * }
+ * @endcode
+ */
+class I2CSlave {
+
+public:
+ enum RxStatus {
+ NoData = 0,
+ ReadAddressed = 1,
+ WriteGeneral = 2,
+ WriteAddressed = 3
+ };
+
+ /** Create an I2C Slave interface, connected to the specified pins.
+ *
+ * @param sda I2C data line pin
+ * @param scl I2C clock line pin
+ */
+ I2CSlave(PinName sda, PinName scl);
+
+ /** Set the frequency of the I2C interface
+ *
+ * @param hz The bus frequency in hertz
+ */
+ void frequency(int hz);
+
+ /** Checks to see if this I2C Slave has been addressed.
+ *
+ * @returns
+ * A status indicating if the device has been addressed, and how
+ * - NoData - the slave has not been addressed
+ * - ReadAddressed - the master has requested a read from this slave
+ * - WriteAddressed - the master is writing to this slave
+ * - WriteGeneral - the master is writing to all slave
+ */
+ int receive(void);
+
+ /** Read from an I2C master.
+ *
+ * @param data pointer to the byte array to read data in to
+ * @param length maximum number of bytes to read
+ *
+ * @returns
+ * 0 on success,
+ * non-0 otherwise
+ */
+ int read(char *data, int length);
+
+ /** Read a single byte from an I2C master.
+ *
+ * @returns
+ * the byte read
+ */
+ int read(void);
+
+ /** Write to an I2C master.
+ *
+ * @param data pointer to the byte array to be transmitted
+ * @param length the number of bytes to transmite
+ *
+ * @returns
+ * 0 on success,
+ * non-0 otherwise
+ */
+ int write(const char *data, int length);
+
+ /** Write a single byte to an I2C master.
+ *
+ * @data the byte to write
+ *
+ * @returns
+ * '1' if an ACK was received,
+ * '0' otherwise
+ */
+ int write(int data);
+
+ /** Sets the I2C slave address.
+ *
+ * @param address The address to set for the slave (ignoring the least
+ * signifcant bit). If set to 0, the slave will only respond to the
+ * general call address.
+ */
+ void address(int address);
+
+ /** Reset the I2C slave back into the known ready receiving state.
+ */
+ void stop(void);
+
+protected:
+ i2c_t _i2c;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/InterruptIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/InterruptIn.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,135 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_INTERRUPTIN_H
+#define MBED_INTERRUPTIN_H
+
+#include "platform.h"
+
+#if DEVICE_INTERRUPTIN
+
+#include "gpio_api.h"
+#include "gpio_irq_api.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** A digital interrupt input, used to call a function on a rising or falling edge
+ *
+ * Example:
+ * @code
+ * // Flash an LED while waiting for events
+ *
+ * #include "mbed.h"
+ *
+ * InterruptIn event(p16);
+ * DigitalOut led(LED1);
+ *
+ * void trigger() {
+ * printf("triggered!\n");
+ * }
+ *
+ * int main() {
+ * event.rise(&trigger);
+ * while(1) {
+ * led = !led;
+ * wait(0.25);
+ * }
+ * }
+ * @endcode
+ */
+class InterruptIn {
+
+public:
+
+ /** Create an InterruptIn connected to the specified pin
+ *
+ * @param pin InterruptIn pin to connect to
+ * @param name (optional) A string to identify the object
+ */
+ InterruptIn(PinName pin);
+ virtual ~InterruptIn();
+
+ int read();
+#ifdef MBED_OPERATORS
+ operator int();
+
+#endif
+
+ /** Attach a function to call when a rising edge occurs on the input
+ *
+ * @param fptr A pointer to a void function, or 0 to set as none
+ */
+ void rise(void (*fptr)(void));
+
+ /** Attach a member function to call when a rising edge occurs on the input
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ */
+ template<typename T>
+ void rise(T* tptr, void (T::*mptr)(void)) {
+ _rise.attach(tptr, mptr);
+ gpio_irq_set(&gpio_irq, IRQ_RISE, 1);
+ }
+
+ /** Attach a function to call when a falling edge occurs on the input
+ *
+ * @param fptr A pointer to a void function, or 0 to set as none
+ */
+ void fall(void (*fptr)(void));
+
+ /** Attach a member function to call when a falling edge occurs on the input
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ */
+ template<typename T>
+ void fall(T* tptr, void (T::*mptr)(void)) {
+ _fall.attach(tptr, mptr);
+ gpio_irq_set(&gpio_irq, IRQ_FALL, 1);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone
+ */
+ void mode(PinMode pull);
+
+ /** Enable IRQ. This method depends on hw implementation, might enable one
+ * port interrupts. For further information, check gpio_irq_enable().
+ */
+ void enable_irq();
+
+ /** Disable IRQ. This method depends on hw implementation, might disable one
+ * port interrupts. For further information, check gpio_irq_disable().
+ */
+ void disable_irq();
+
+ static void _irq_handler(uint32_t id, gpio_irq_event event);
+
+protected:
+ gpio_t gpio;
+ gpio_irq_t gpio_irq;
+
+ FunctionPointer _rise;
+ FunctionPointer _fall;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/InterruptManager.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/InterruptManager.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,143 @@
+#ifndef MBED_INTERRUPTMANAGER_H
+#define MBED_INTERRUPTMANAGER_H
+
+#include "cmsis.h"
+#include "CallChain.h"
+#include <string.h>
+
+namespace mbed {
+
+/** Use this singleton if you need to chain interrupt handlers.
+ *
+ * Example (for LPC1768):
+ * @code
+ * #include "InterruptManager.h"
+ * #include "mbed.h"
+ *
+ * Ticker flipper;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ *
+ * void flip(void) {
+ * led1 = !led1;
+ * }
+ *
+ * void handler(void) {
+ * led2 = !led1;
+ * }
+ *
+ * int main() {
+ * led1 = led2 = 0;
+ * flipper.attach(&flip, 1.0);
+ * InterruptManager::get()->add_handler(handler, TIMER3_IRQn);
+ * }
+ * @endcode
+ */
+class InterruptManager {
+public:
+ /** Return the only instance of this class
+ */
+ static InterruptManager* get();
+
+ /** Destroy the current instance of the interrupt manager
+ */
+ static void destroy();
+
+ /** Add a handler for an interrupt at the end of the handler list
+ *
+ * @param function the handler to add
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add_handler(void (*function)(void), IRQn_Type irq) {
+ return add_common(function, irq);
+ }
+
+ /** Add a handler for an interrupt at the beginning of the handler list
+ *
+ * @param function the handler to add
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'function'
+ */
+ pFunctionPointer_t add_handler_front(void (*function)(void), IRQn_Type irq) {
+ return add_common(function, irq, true);
+ }
+
+ /** Add a handler for an interrupt at the end of the handler list
+ *
+ * @param tptr pointer to the object that has the handler function
+ * @param mptr pointer to the actual handler function
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add_handler(T* tptr, void (T::*mptr)(void), IRQn_Type irq) {
+ return add_common(tptr, mptr, irq);
+ }
+
+ /** Add a handler for an interrupt at the beginning of the handler list
+ *
+ * @param tptr pointer to the object that has the handler function
+ * @param mptr pointer to the actual handler function
+ * @param irq interrupt number
+ *
+ * @returns
+ * The function object created for 'tptr' and 'mptr'
+ */
+ template<typename T>
+ pFunctionPointer_t add_handler_front(T* tptr, void (T::*mptr)(void), IRQn_Type irq) {
+ return add_common(tptr, mptr, irq, true);
+ }
+
+ /** Remove a handler from an interrupt
+ *
+ * @param handler the function object for the handler to remove
+ * @param irq the interrupt number
+ *
+ * @returns
+ * true if the handler was found and removed, false otherwise
+ */
+ bool remove_handler(pFunctionPointer_t handler, IRQn_Type irq);
+
+private:
+ InterruptManager();
+ ~InterruptManager();
+
+ // We declare the copy contructor and the assignment operator, but we don't
+ // implement them. This way, if someone tries to copy/assign our instance,
+ // he will get an error at compile time.
+ InterruptManager(const InterruptManager&);
+ InterruptManager& operator =(const InterruptManager&);
+
+ template<typename T>
+ pFunctionPointer_t add_common(T *tptr, void (T::*mptr)(void), IRQn_Type irq, bool front=false) {
+ int irq_pos = get_irq_index(irq);
+ bool change = must_replace_vector(irq);
+
+ pFunctionPointer_t pf = front ? _chains[irq_pos]->add_front(tptr, mptr) : _chains[irq_pos]->add(tptr, mptr);
+ if (change)
+ NVIC_SetVector(irq, (uint32_t)&InterruptManager::static_irq_helper);
+ return pf;
+ }
+
+ pFunctionPointer_t add_common(void (*function)(void), IRQn_Type irq, bool front=false);
+ bool must_replace_vector(IRQn_Type irq);
+ int get_irq_index(IRQn_Type irq);
+ void irq_helper();
+ void add_helper(void (*function)(void), IRQn_Type irq, bool front=false);
+ static void static_irq_helper();
+
+ CallChain* _chains[NVIC_NUM_VECTORS];
+ static InterruptManager* _instance;
+};
+
+} // namespace mbed
+
+#endif
+
diff -r 000000000000 -r 637031152314 mbed/LocalFileSystem.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/LocalFileSystem.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOCALFILESYSTEM_H
+#define MBED_LOCALFILESYSTEM_H
+
+#include "platform.h"
+
+#if DEVICE_LOCALFILESYSTEM
+
+#include "FileSystemLike.h"
+
+namespace mbed {
+
+FILEHANDLE local_file_open(const char* name, int flags);
+
+class LocalFileHandle : public FileHandle {
+
+public:
+ LocalFileHandle(FILEHANDLE fh);
+
+ virtual int close();
+
+ virtual ssize_t write(const void *buffer, size_t length);
+
+ virtual ssize_t read(void *buffer, size_t length);
+
+ virtual int isatty();
+
+ virtual off_t lseek(off_t position, int whence);
+
+ virtual int fsync();
+
+ virtual off_t flen();
+
+protected:
+ FILEHANDLE _fh;
+ int pos;
+};
+
+/** A filesystem for accessing the local mbed Microcontroller USB disk drive
+ *
+ * This allows programs to read and write files on the same disk drive that is used to program the
+ * mbed Microcontroller. Once created, the standard C file access functions are used to open,
+ * read and write files.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * LocalFileSystem local("local"); // Create the local filesystem under the name "local"
+ *
+ * int main() {
+ * FILE *fp = fopen("/local/out.txt", "w"); // Open "out.txt" on the local file system for writing
+ * fprintf(fp, "Hello World!");
+ * fclose(fp);
+ * remove("/local/out.txt"); // Removes the file "out.txt" from the local file system
+ *
+ * DIR *d = opendir("/local"); // Opens the root directory of the local file system
+ * struct dirent *p;
+ * while((p = readdir(d)) != NULL) { // Print the names of the files in the local file system
+ * printf("%s\n", p->d_name); // to stdout.
+ * }
+ * closedir(d);
+ * }
+ * @endcode
+ *
+ * @note
+ * If the microcontroller program makes an access to the local drive, it will be marked as "removed"
+ * on the Host computer. This means it is no longer accessible from the Host Computer.
+ *
+ * The drive will only re-appear when the microcontroller program exists. Note that if the program does
+ * not exit, you will need to hold down reset on the mbed Microcontroller to be able to see the drive again!
+ */
+class LocalFileSystem : public FileSystemLike {
+
+public:
+ LocalFileSystem(const char* n) : FileSystemLike(n) {
+
+ }
+
+ virtual FileHandle *open(const char* name, int flags);
+ virtual int remove(const char *filename);
+ virtual DirHandle *opendir(const char *name);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/PortIn.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/PortIn.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTIN_H
+#define MBED_PORTIN_H
+
+#include "platform.h"
+
+#if DEVICE_PORTIN
+
+#include "port_api.h"
+
+namespace mbed {
+
+/** A multiple pin digital input
+ *
+ * Example:
+ * @code
+ * // Switch on an LED if any of mbed pins 21-26 is high
+ *
+ * #include "mbed.h"
+ *
+ * PortIn p(Port2, 0x0000003F); // p21-p26
+ * DigitalOut ind(LED4);
+ *
+ * int main() {
+ * while(1) {
+ * int pins = p.read();
+ * if(pins) {
+ * ind = 1;
+ * } else {
+ * ind = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class PortIn {
+public:
+
+ /** Create an PortIn, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortIn(PortName port, int mask = 0xFFFFFFFF) {
+ port_init(&_port, port, mask, PIN_INPUT);
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated port pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode mode) {
+ port_mode(&_port, mode);
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/PortInOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/PortInOut.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTINOUT_H
+#define MBED_PORTINOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PORTINOUT
+
+#include "port_api.h"
+
+namespace mbed {
+
+/** A multiple pin digital in/out used to set/read multiple bi-directional pins
+ */
+class PortInOut {
+public:
+
+ /** Create an PortInOut, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortInOut(PortName port, int mask = 0xFFFFFFFF) {
+ port_init(&_port, port, mask, PIN_INPUT);
+ }
+
+ /** Write the value to the output port
+ *
+ * @param value An integer specifying a bit to write for every corresponding port pin
+ */
+ void write(int value) {
+ port_write(&_port, value);
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated port pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** Set as an output
+ */
+ void output() {
+ port_dir(&_port, PIN_OUTPUT);
+ }
+
+ /** Set as an input
+ */
+ void input() {
+ port_dir(&_port, PIN_INPUT);
+ }
+
+ /** Set the input pin mode
+ *
+ * @param mode PullUp, PullDown, PullNone, OpenDrain
+ */
+ void mode(PinMode mode) {
+ port_mode(&_port, mode);
+ }
+
+ /** A shorthand for write()
+ */
+ PortInOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ PortInOut& operator= (PortInOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/PortOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/PortOut.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTOUT_H
+#define MBED_PORTOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PORTOUT
+
+#include "port_api.h"
+
+namespace mbed {
+/** A multiple pin digital out
+ *
+ * Example:
+ * @code
+ * // Toggle all four LEDs
+ *
+ * #include "mbed.h"
+ *
+ * // LED1 = P1.18 LED2 = P1.20 LED3 = P1.21 LED4 = P1.23
+ * #define LED_MASK 0x00B40000
+ *
+ * PortOut ledport(Port1, LED_MASK);
+ *
+ * int main() {
+ * while(1) {
+ * ledport = LED_MASK;
+ * wait(1);
+ * ledport = 0;
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+class PortOut {
+public:
+
+ /** Create an PortOut, connected to the specified port
+ *
+ * @param port Port to connect to (Port0-Port5)
+ * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+ */
+ PortOut(PortName port, int mask = 0xFFFFFFFF) {
+ port_init(&_port, port, mask, PIN_OUTPUT);
+ }
+
+ /** Write the value to the output port
+ *
+ * @param value An integer specifying a bit to write for every corresponding PortOut pin
+ */
+ void write(int value) {
+ port_write(&_port, value);
+ }
+
+ /** Read the value currently output on the port
+ *
+ * @returns
+ * An integer with each bit corresponding to associated PortOut pin setting
+ */
+ int read() {
+ return port_read(&_port);
+ }
+
+ /** A shorthand for write()
+ */
+ PortOut& operator= (int value) {
+ write(value);
+ return *this;
+ }
+
+ PortOut& operator= (PortOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** A shorthand for read()
+ */
+ operator int() {
+ return read();
+ }
+
+private:
+ port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/PwmOut.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/PwmOut.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,158 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PWMOUT_H
+#define MBED_PWMOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PWMOUT
+#include "pwmout_api.h"
+
+namespace mbed {
+
+/** A pulse-width modulation digital output
+ *
+ * Example
+ * @code
+ * // Fade a led on.
+ * #include "mbed.h"
+ *
+ * PwmOut led(LED1);
+ *
+ * int main() {
+ * while(1) {
+ * led = led + 0.01;
+ * wait(0.2);
+ * if(led == 1.0) {
+ * led = 0;
+ * }
+ * }
+ * }
+ * @endcode
+ *
+ * @note
+ * On the LPC1768 and LPC2368, the PWMs all share the same
+ * period - if you change the period for one, you change it for all.
+ * Although routines that change the period maintain the duty cycle
+ * for its PWM, all other PWMs will require their duty cycle to be
+ * refreshed.
+ */
+class PwmOut {
+
+public:
+
+ /** Create a PwmOut connected to the specified pin
+ *
+ * @param pin PwmOut pin to connect to
+ */
+ PwmOut(PinName pin) {
+ pwmout_init(&_pwm, pin);
+ }
+
+ /** Set the ouput duty-cycle, specified as a percentage (float)
+ *
+ * @param value A floating-point value representing the output duty-cycle,
+ * specified as a percentage. The value should lie between
+ * 0.0f (representing on 0%) and 1.0f (representing on 100%).
+ * Values outside this range will be saturated to 0.0f or 1.0f.
+ */
+ void write(float value) {
+ pwmout_write(&_pwm, value);
+ }
+
+ /** Return the current output duty-cycle setting, measured as a percentage (float)
+ *
+ * @returns
+ * A floating-point value representing the current duty-cycle being output on the pin,
+ * measured as a percentage. The returned value will lie between
+ * 0.0f (representing on 0%) and 1.0f (representing on 100%).
+ *
+ * @note
+ * This value may not match exactly the value set by a previous <write>.
+ */
+ float read() {
+ return pwmout_read(&_pwm);
+ }
+
+ /** Set the PWM period, specified in seconds (float), keeping the duty cycle the same.
+ *
+ * @note
+ * The resolution is currently in microseconds; periods smaller than this
+ * will be set to zero.
+ */
+ void period(float seconds) {
+ pwmout_period(&_pwm, seconds);
+ }
+
+ /** Set the PWM period, specified in milli-seconds (int), keeping the duty cycle the same.
+ */
+ void period_ms(int ms) {
+ pwmout_period_ms(&_pwm, ms);
+ }
+
+ /** Set the PWM period, specified in micro-seconds (int), keeping the duty cycle the same.
+ */
+ void period_us(int us) {
+ pwmout_period_us(&_pwm, us);
+ }
+
+ /** Set the PWM pulsewidth, specified in seconds (float), keeping the period the same.
+ */
+ void pulsewidth(float seconds) {
+ pwmout_pulsewidth(&_pwm, seconds);
+ }
+
+ /** Set the PWM pulsewidth, specified in milli-seconds (int), keeping the period the same.
+ */
+ void pulsewidth_ms(int ms) {
+ pwmout_pulsewidth_ms(&_pwm, ms);
+ }
+
+ /** Set the PWM pulsewidth, specified in micro-seconds (int), keeping the period the same.
+ */
+ void pulsewidth_us(int us) {
+ pwmout_pulsewidth_us(&_pwm, us);
+ }
+
+#ifdef MBED_OPERATORS
+ /** A operator shorthand for write()
+ */
+ PwmOut& operator= (float value) {
+ write(value);
+ return *this;
+ }
+
+ PwmOut& operator= (PwmOut& rhs) {
+ write(rhs.read());
+ return *this;
+ }
+
+ /** An operator shorthand for read()
+ */
+ operator float() {
+ return read();
+ }
+#endif
+
+protected:
+ pwmout_t _pwm;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/RawSerial.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/RawSerial.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,90 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_RAW_SERIAL_H
+#define MBED_RAW_SERIAL_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "SerialBase.h"
+#include "serial_api.h"
+
+namespace mbed {
+
+/** A serial port (UART) for communication with other serial devices
+ * This is a variation of the Serial class that doesn't use streams,
+ * thus making it safe to use in interrupt handlers with the RTOS.
+ *
+ * Can be used for Full Duplex communication, or Simplex by specifying
+ * one pin as NC (Not Connected)
+ *
+ * Example:
+ * @code
+ * // Send a char to the PC
+ *
+ * #include "mbed.h"
+ *
+ * RawSerial pc(USBTX, USBRX);
+ *
+ * int main() {
+ * pc.putc('A');
+ * }
+ * @endcode
+ */
+class RawSerial: public SerialBase {
+
+public:
+ /** Create a RawSerial port, connected to the specified transmit and receive pins
+ *
+ * @param tx Transmit pin
+ * @param rx Receive pin
+ *
+ * @note
+ * Either tx or rx may be specified as NC if unused
+ */
+ RawSerial(PinName tx, PinName rx);
+
+ /** Write a char to the serial port
+ *
+ * @param c The char to write
+ *
+ * @returns The written char or -1 if an error occured
+ */
+ int putc(int c);
+
+ /** Read a char from the serial port
+ *
+ * @returns The char read from the serial port
+ */
+ int getc();
+
+ /** Write a string to the serial port
+ *
+ * @param str The string to write
+ *
+ * @returns 0 if the write succeeds, EOF for error
+ */
+ int puts(const char *str);
+
+ int printf(const char *format, ...);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/SPI.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/SPI.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,109 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPI_H
+#define MBED_SPI_H
+
+#include "platform.h"
+
+#if DEVICE_SPI
+
+#include "spi_api.h"
+
+namespace mbed {
+
+/** A SPI Master, used for communicating with SPI slave devices
+ *
+ * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
+ *
+ * Most SPI devices will also require Chip Select and Reset signals. These
+ * can be controlled using <DigitalOut> pins
+ *
+ * Example:
+ * @code
+ * // Send a byte to a SPI slave, and record the response
+ *
+ * #include "mbed.h"
+ *
+ * SPI device(p5, p6, p7); // mosi, miso, sclk
+ *
+ * int main() {
+ * int response = device.write(0xFF);
+ * }
+ * @endcode
+ */
+class SPI {
+
+public:
+
+ /** Create a SPI master connected to the specified pins
+ *
+ * Pin Options:
+ * (5, 6, 7) or (11, 12, 13)
+ *
+ * mosi or miso can be specfied as NC if not used
+ *
+ * @param mosi SPI Master Out, Slave In pin
+ * @param miso SPI Master In, Slave Out pin
+ * @param sclk SPI Clock pin
+ */
+ SPI(PinName mosi, PinName miso, PinName sclk, PinName _unused=NC);
+
+ /** Configure the data transmission format
+ *
+ * @param bits Number of bits per SPI frame (4 - 16)
+ * @param mode Clock polarity and phase mode (0 - 3)
+ *
+ * @code
+ * mode | POL PHA
+ * -----+--------
+ * 0 | 0 0
+ * 1 | 0 1
+ * 2 | 1 0
+ * 3 | 1 1
+ * @endcode
+ */
+ void format(int bits, int mode = 0);
+
+ /** Set the spi bus clock frequency
+ *
+ * @param hz SCLK frequency in hz (default = 1MHz)
+ */
+ void frequency(int hz = 1000000);
+
+ /** Write to the SPI Slave and return the response
+ *
+ * @param value Data to be sent to the SPI slave
+ *
+ * @returns
+ * Response from the SPI slave
+ */
+ virtual int write(int value);
+
+protected:
+ spi_t _spi;
+
+ void aquire(void);
+ static SPI *_owner;
+ int _bits;
+ int _mode;
+ int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/SPISlave.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/SPISlave.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,126 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPISLAVE_H
+#define MBED_SPISLAVE_H
+
+#include "platform.h"
+
+#if DEVICE_SPISLAVE
+
+#include "spi_api.h"
+
+namespace mbed {
+
+/** A SPI slave, used for communicating with a SPI Master device
+ *
+ * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
+ *
+ * Example:
+ * @code
+ * // Reply to a SPI master as slave
+ *
+ * #include "mbed.h"
+ *
+ * SPISlave device(p5, p6, p7, p8); // mosi, miso, sclk, ssel
+ *
+ * int main() {
+ * device.reply(0x00); // Prime SPI with first reply
+ * while(1) {
+ * if(device.receive()) {
+ * int v = device.read(); // Read byte from master
+ * v = (v + 1) % 0x100; // Add one to it, modulo 256
+ * device.reply(v); // Make this the next reply
+ * }
+ * }
+ * }
+ * @endcode
+ */
+class SPISlave {
+
+public:
+
+ /** Create a SPI slave connected to the specified pins
+ *
+ * Pin Options:
+ * (5, 6, 7i, 8) or (11, 12, 13, 14)
+ *
+ * mosi or miso can be specfied as NC if not used
+ *
+ * @param mosi SPI Master Out, Slave In pin
+ * @param miso SPI Master In, Slave Out pin
+ * @param sclk SPI Clock pin
+ * @param ssel SPI chip select pin
+ * @param name (optional) A string to identify the object
+ */
+ SPISlave(PinName mosi, PinName miso, PinName sclk, PinName ssel);
+
+ /** Configure the data transmission format
+ *
+ * @param bits Number of bits per SPI frame (4 - 16)
+ * @param mode Clock polarity and phase mode (0 - 3)
+ *
+ * @code
+ * mode | POL PHA
+ * -----+--------
+ * 0 | 0 0
+ * 1 | 0 1
+ * 2 | 1 0
+ * 3 | 1 1
+ * @endcode
+ */
+ void format(int bits, int mode = 0);
+
+ /** Set the spi bus clock frequency
+ *
+ * @param hz SCLK frequency in hz (default = 1MHz)
+ */
+ void frequency(int hz = 1000000);
+
+ /** Polls the SPI to see if data has been received
+ *
+ * @returns
+ * 0 if no data,
+ * 1 otherwise
+ */
+ int receive(void);
+
+ /** Retrieve data from receive buffer as slave
+ *
+ * @returns
+ * the data in the receive buffer
+ */
+ int read(void);
+
+ /** Fill the transmission buffer with the value to be written out
+ * as slave on the next received message from the master.
+ *
+ * @param value the data to be transmitted next
+ */
+ void reply(int value);
+
+protected:
+ spi_t _spi;
+
+ int _bits;
+ int _mode;
+ int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/Serial.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/Serial.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,69 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIAL_H
+#define MBED_SERIAL_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "Stream.h"
+#include "SerialBase.h"
+#include "serial_api.h"
+
+namespace mbed {
+
+/** A serial port (UART) for communication with other serial devices
+ *
+ * Can be used for Full Duplex communication, or Simplex by specifying
+ * one pin as NC (Not Connected)
+ *
+ * Example:
+ * @code
+ * // Print "Hello World" to the PC
+ *
+ * #include "mbed.h"
+ *
+ * Serial pc(USBTX, USBRX);
+ *
+ * int main() {
+ * pc.printf("Hello World\n");
+ * }
+ * @endcode
+ */
+class Serial : public SerialBase, public Stream {
+
+public:
+ /** Create a Serial port, connected to the specified transmit and receive pins
+ *
+ * @param tx Transmit pin
+ * @param rx Receive pin
+ *
+ * @note
+ * Either tx or rx may be specified as NC if unused
+ */
+ Serial(PinName tx, PinName rx, const char *name=NULL);
+
+protected:
+ virtual int _getc();
+ virtual int _putc(int c);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/SerialBase.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/SerialBase.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,137 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIALBASE_H
+#define MBED_SERIALBASE_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "Stream.h"
+#include "FunctionPointer.h"
+#include "serial_api.h"
+
+namespace mbed {
+
+/** A base class for serial port implementations
+ * Can't be instantiated directly (use Serial or RawSerial)
+ */
+class SerialBase {
+
+public:
+ /** Set the baud rate of the serial port
+ *
+ * @param baudrate The baudrate of the serial port (default = 9600).
+ */
+ void baud(int baudrate);
+
+ enum Parity {
+ None = 0,
+ Odd,
+ Even,
+ Forced1,
+ Forced0
+ };
+
+ enum IrqType {
+ RxIrq = 0,
+ TxIrq
+ };
+
+ enum Flow {
+ Disabled = 0,
+ RTS,
+ CTS,
+ RTSCTS
+ };
+
+ /** Set the transmission format used by the serial port
+ *
+ * @param bits The number of bits in a word (5-8; default = 8)
+ * @param parity The parity used (SerialBase::None, SerialBase::Odd, SerialBase::Even, SerialBase::Forced1, SerialBase::Forced0; default = SerialBase::None)
+ * @param stop The number of stop bits (1 or 2; default = 1)
+ */
+ void format(int bits=8, Parity parity=SerialBase::None, int stop_bits=1);
+
+ /** Determine if there is a character available to read
+ *
+ * @returns
+ * 1 if there is a character available to read,
+ * 0 otherwise
+ */
+ int readable();
+
+ /** Determine if there is space available to write a character
+ *
+ * @returns
+ * 1 if there is space to write a character,
+ * 0 otherwise
+ */
+ int writeable();
+
+ /** Attach a function to call whenever a serial interrupt is generated
+ *
+ * @param fptr A pointer to a void function, or 0 to set as none
+ * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+ */
+ void attach(void (*fptr)(void), IrqType type=RxIrq);
+
+ /** Attach a member function to call whenever a serial interrupt is generated
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+ */
+ template<typename T>
+ void attach(T* tptr, void (T::*mptr)(void), IrqType type=RxIrq) {
+ if((mptr != NULL) && (tptr != NULL)) {
+ _irq[type].attach(tptr, mptr);
+ serial_irq_set(&_serial, (SerialIrq)type, 1);
+ }
+ }
+
+ /** Generate a break condition on the serial line
+ */
+ void send_break();
+
+#if DEVICE_SERIAL_FC
+ /** Set the flow control type on the serial port
+ *
+ * @param type the flow control type (Disabled, RTS, CTS, RTSCTS)
+ * @param flow1 the first flow control pin (RTS for RTS or RTSCTS, CTS for CTS)
+ * @param flow2 the second flow control pin (CTS for RTSCTS)
+ */
+ void set_flow_control(Flow type, PinName flow1=NC, PinName flow2=NC);
+#endif
+
+ static void _irq_handler(uint32_t id, SerialIrq irq_type);
+
+protected:
+ SerialBase(PinName tx, PinName rx);
+
+ int _base_getc();
+ int _base_putc(int c);
+
+ serial_t _serial;
+ FunctionPointer _irq[2];
+ int _baud;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/Stream.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/Stream.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_STREAM_H
+#define MBED_STREAM_H
+
+#include "platform.h"
+#include "FileLike.h"
+
+namespace mbed {
+
+class Stream : public FileLike {
+
+public:
+ Stream(const char *name=NULL);
+ virtual ~Stream();
+
+ int putc(int c);
+ int puts(const char *s);
+ int getc();
+ char *gets(char *s, int size);
+ int printf(const char* format, ...);
+ int scanf(const char* format, ...);
+
+ operator std::FILE*() {return _file;}
+
+protected:
+ virtual int close();
+ virtual ssize_t write(const void* buffer, size_t length);
+ virtual ssize_t read(void* buffer, size_t length);
+ virtual off_t lseek(off_t offset, int whence);
+ virtual int isatty();
+ virtual int fsync();
+ virtual off_t flen();
+
+ virtual int _putc(int c) = 0;
+ virtual int _getc() = 0;
+
+ std::FILE *_file;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/PeripheralNames.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/PeripheralNames.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,58 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define STDIO_UART_TX TX_PIN_NUMBER
+#define STDIO_UART_RX RX_PIN_NUMBER
+#define STDIO_UART UART_0
+
+typedef enum {
+ UART_0 = (int)NRF_UART0_BASE
+} UARTName;
+
+
+typedef enum {
+ SPI_0 = (int)NRF_SPI0_BASE,
+ SPI_1 = (int)NRF_SPI1_BASE,
+ SPIS = (int)NRF_SPIS1_BASE
+} SPIName;
+
+typedef enum {
+ PWM_1 = 0,
+ PWM_2
+} PWMName;
+
+typedef enum {
+ I2C_0 = (int)NRF_TWI0_BASE,
+ I2C_1 = (int)NRF_TWI1_BASE
+} I2CName;
+
+typedef enum {
+ ADC0_0 = (int)NRF_ADC_BASE
+} ADCName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/PinNames.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/PinNames.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,152 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 3
+
+typedef enum {
+ p0 = 0,
+ p1 = 1,
+ p2 = 2,
+ p3 = 3,
+ p4 = 4,
+ p5 = 5,
+ p6 = 6,
+ p7 = 7,
+ p8 = 8,
+ p9 = 9,
+ p10 = 10,
+ p11 = 11,
+ p12 = 12,
+ p13 = 13,
+ p14 = 14,
+ p15 = 15,
+ p16 = 16,
+ p17 = 17,
+ p18 = 18,
+ p19 = 19,
+ p20 = 20,
+ p21 = 21,
+ p22 = 22,
+ p23 = 23,
+ p24 = 24,
+ p25 = 25,
+ p26 = 26,
+ p27 = 27,
+ p28 = 28,
+ p29 = 29,
+ p30 = 30,
+// p31=31,
+
+ P0_0 = p0,
+ P0_1 = p1,
+ P0_2 = p2,
+ P0_3 = p3,
+ P0_4 = p4,
+ P0_5 = p5,
+ P0_6 = p6,
+ P0_7 = p7,
+
+ P0_8 = p8,
+ P0_9 = p9,
+ P0_10 = p10,
+ P0_11 = p11,
+ P0_12 = p12,
+ P0_13 = p13,
+ P0_14 = p14,
+ P0_15 = p15,
+
+ P0_16 = p16,
+ P0_17 = p17,
+ P0_18 = p18,
+ P0_19 = p19,
+ P0_20 = p20,
+ P0_21 = p21,
+ P0_22 = p22,
+ P0_23 = p23,
+
+ P0_24 = p24,
+ P0_25 = p25,
+ P0_26 = p26,
+ P0_27 = p27,
+ P0_28 = p28,
+ P0_29 = p29,
+ P0_30 = p30,
+
+ LED1 = p18,
+ LED2 = p19,
+ LED3 = p18,
+ LED4 = p19,
+
+ BUTTON0 = p16,
+ BUTTON1 = p17,
+
+ RX_PIN_NUMBER = p11,
+ TX_PIN_NUMBER = p9,
+ CTS_PIN_NUMBER = p10,
+ RTS_PIN_NUMBER = p8,
+
+ // mBed interface Pins
+ USBTX = TX_PIN_NUMBER,
+ USBRX = RX_PIN_NUMBER,
+
+ SPI_PSELMOSI0 = p20,
+ SPI_PSELMISO0 = p22,
+ SPI_PSELSS0 = p24,
+ SPI_PSELSCK0 = p25,
+
+ SPI_PSELMOSI1 = p12,
+ SPI_PSELMISO1 = p13,
+ SPI_PSELSS1 = p14,
+ SPI_PSELSCK1 = p15,
+
+ SPIS_PSELMOSI = p12,
+ SPIS_PSELMISO = p13,
+ SPIS_PSELSS = p14,
+ SPIS_PSELSCK = p15,
+
+ I2C_SDA0 = p22,
+ I2C_SCL0 = p20,
+
+ I2C_SDA1 = p13,
+ I2C_SCL1 = p15,
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullDown = 1,
+ PullUp = 3
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/PortNames.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/PortNames.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,30 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ Port0 = 0 //GPIO pins 0-31
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/cmsis_nvic.o Binary file mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/mbed.ar Binary file mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/mbed.ar has changed
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/nRF51822.sct
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/nRF51822.sct Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,27 @@
+;WITHOUT SOFTDEVICE:
+;LR_IROM1 0x00000000 0x00040000 {
+; ER_IROM1 0x00000000 0x00040000 {
+; *.o (RESET, +First)
+; *(InRoot$$Sections)
+; .ANY (+RO)
+; }
+; RW_IRAM1 0x20000000 0x00004000 {
+; .ANY (+RW +ZI)
+; }
+;}
+;
+;WITH SOFTDEVICE:
+
+LR_IROM1 0x14000 0x002C000 {
+ ER_IROM1 0x14000 0x002C000 {
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM1 0x20002000 0x00002000 {
+ .ANY (+RW +ZI)
+ }
+}
+
+
+
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/retarget.o Binary file mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/retarget.o has changed
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/startup_nRF51822.o Binary file mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/startup_nRF51822.o has changed
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/sys.o Binary file mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/sys.o has changed
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/system_nrf51822.o Binary file mbed/TARGET_NRF51822/TOOLCHAIN_ARM_STD/system_nrf51822.o has changed
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/ble.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/ble.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,302 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_COMMON BLE SoftDevice Common
+ @{
+ @defgroup ble_api Events, type definitions and API calls
+ @{
+
+ @brief Module independent events, type definitions and API calls for the S110 SoftDevice.
+
+ */
+
+#ifndef BLE_H__
+#define BLE_H__
+
+#include "ble_ranges.h"
+#include "ble_types.h"
+#include "ble_gap.h"
+#include "ble_l2cap.h"
+#include "ble_gatt.h"
+#include "ble_gattc.h"
+#include "ble_gatts.h"
+
+/**
+ * @brief Common API SVC numbers.
+ */
+enum BLE_COMMON_SVCS
+{
+ SD_BLE_EVT_GET = BLE_SVC_BASE, /**< Get an event from the pending events queue. */
+ SD_BLE_TX_BUFFER_COUNT_GET, /**< Get the total number of available application transmission buffers from the stack. */
+ SD_BLE_UUID_VS_ADD, /**< Add a Vendor Specific UUID. */
+ SD_BLE_UUID_DECODE, /**< Decode UUID bytes. */
+ SD_BLE_UUID_ENCODE, /**< Encode UUID bytes. */
+ SD_BLE_VERSION_GET, /**< Get the local version information (company id, LMP Version, LMP Subversion). */
+ SD_BLE_USER_MEM_REPLY, /**< User Memory Reply. */
+};
+
+/** @brief Required pointer alignment for BLE Events.
+*/
+#define BLE_EVTS_PTR_ALIGNMENT 4
+
+/** @defgroup BLE_USER_MEM_TYPES User Memory Types
+ * @{ */
+#define BLE_USER_MEM_TYPE_INVALID 0x00 /**< Invalid User Memory Types. */
+#define BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES 0x01 /**< User Memory for GATTS queued writes. */
+/** @} */
+
+/** @brief Maximum number of Vendor Specific UUIDs.
+*/
+#define BLE_UUID_VS_MAX_COUNT 10
+
+/**
+ * @brief BLE Module Independent Event IDs.
+ */
+enum BLE_COMMON_EVTS
+{
+ BLE_EVT_TX_COMPLETE = BLE_EVT_BASE, /**< Transmission Complete. */
+ BLE_EVT_USER_MEM_REQUEST, /**< User Memory request. */
+ BLE_EVT_USER_MEM_RELEASE /**< User Memory release. */
+};
+
+/**@brief User Memory Block. */
+typedef struct
+{
+ uint8_t* p_mem; /**< Pointer to the start of the user memory block. */
+ uint16_t len; /**< Length in bytes of the user memory block. */
+} ble_user_mem_block_t;
+
+/**
+ * @brief TX complete event.
+ */
+typedef struct
+{
+ uint8_t count; /**< Number of packets transmitted. */
+} ble_evt_tx_complete_t;
+
+/**@brief Event structure for BLE_EVT_USER_MEM_REQUEST. */
+typedef struct
+{
+ uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */
+} ble_evt_user_mem_request_t;
+
+/**@brief Event structure for BLE_EVT_USER_MEM_RELEASE. */
+typedef struct
+{
+ uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */
+ ble_user_mem_block_t mem_block; /**< User memory block */
+} ble_evt_user_mem_release_t;
+
+
+/**@brief Event structure for events not associated with a specific function module. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which this event occured. */
+ union
+ {
+ ble_evt_tx_complete_t tx_complete; /**< Transmission Complete. */
+ ble_evt_user_mem_request_t user_mem_request; /**< User Memory Request Event Parameters. */
+ ble_evt_user_mem_release_t user_mem_release; /**< User Memory Release Event Parameters. */
+ } params;
+} ble_common_evt_t;
+
+/**@brief BLE Event header. */
+typedef struct
+{
+ uint16_t evt_id; /**< Value from a BLE_<module>_EVT series. */
+ uint16_t evt_len; /**< Length in octets excluding this header. */
+} ble_evt_hdr_t;
+
+/**@brief Common BLE Event type, wrapping the module specific event reports. */
+typedef struct
+{
+ ble_evt_hdr_t header; /**< Event header. */
+ union
+ {
+ ble_common_evt_t common_evt; /**< Common Event, evt_id in BLE_EVT_* series. */
+ ble_gap_evt_t gap_evt; /**< GAP originated event, evt_id in BLE_GAP_EVT_* series. */
+ ble_l2cap_evt_t l2cap_evt; /**< L2CAP originated event, evt_id in BLE_L2CAP_EVT* series. */
+ ble_gattc_evt_t gattc_evt; /**< GATT client originated event, evt_id in BLE_GATTC_EVT* series. */
+ ble_gatts_evt_t gatts_evt; /**< GATT server originated event, evt_id in BLE_GATTS_EVT* series. */
+ } evt;
+} ble_evt_t;
+
+
+/**
+ * @brief Version Information.
+ */
+typedef struct
+{
+ uint8_t version_number; /**< LMP Version number for BT 4.0 spec is 6 (https://www.bluetooth.org/technical/assignednumbers/link_layer.htm). */
+ uint16_t company_id; /**< Company ID, Nordic Semiconductor's company ID is 89 (0x0059) (https://www.bluetooth.org/apps/content/Default.aspx?doc_id=49708). */
+ uint16_t subversion_number; /**< LMP Sub Version number corresponds to the SoftDevice Config ID. */
+} ble_version_t;
+
+
+/**@brief Get an event from the pending events queue.
+ *
+ * @param[in] p_dest Pointer to buffer to be filled in with an event, or NULL to retrieve the event length. This buffer <b>must be 4-byte aligned in memory</b>.
+ * @param[in, out] p_len Pointer the length of the buffer, on return it is filled with the event length.
+ *
+ * @details This call allows the application to pull a BLE event from the BLE stack. The application is signalled that an event is
+ * available from the BLE Stack by the triggering of the SD_EVT_IRQn interrupt (mapped to IRQ 22).
+ * The application is free to choose whether to call this function from thread mode (main context) or directly from the Interrupt Service Routine
+ * that maps to SD_EVT_IRQn. In any case however, and because the BLE stack runs at a higher priority than the application, this function should be called
+ * in a loop (until @ref NRF_ERROR_NOT_FOUND is returned) every time SD_EVT_IRQn is raised to ensure that all available events are pulled from the stack.
+ * Failure to do so could potentially leave events in the internal queue without the application being aware of this fact.
+ * Sizing the p_dest buffer is equally important, since the application needs to provide all the memory necessary for the event to be copied into
+ * application memory. If the buffer provided is not large enough to fit the entire contents of the event, @ref NRF_ERROR_DATA_SIZE will be returned
+ * and the application can then call again with a larger buffer size.
+ * Please note that because of the variable length nature of some events, sizeof(ble_evt_t) will not always be large enough to fit certain events,
+ * and so it is the application's responsability to provide an amount of memory large enough so that the relevant event is copied in full.
+ * The application may "peek" the event length by providing p_dest as a NULL pointer and inspecting the value of *p_len upon return.
+ *
+ * @note The pointer supplied must be aligned to the extend defined by @ref BLE_EVTS_PTR_ALIGNMENT
+ *
+ * @return @ref NRF_SUCCESS Event pulled and stored into the supplied buffer.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied.
+ * @return @ref NRF_ERROR_NOT_FOUND No events ready to be pulled.
+ * @return @ref NRF_ERROR_DATA_SIZE Event ready but could not fit into the supplied buffer.
+ */
+SVCALL(SD_BLE_EVT_GET, uint32_t, sd_ble_evt_get(uint8_t* p_dest, uint16_t *p_len));
+
+
+/**@brief Get the total number of available application transmission buffers in the BLE stack.
+ *
+ * @details This call allows the application to obtain the total number of
+ * transmission buffers available for application data. Please note that
+ * this does not give the number of free buffers, but rather the total amount of them.
+ * The application has two options to handle its own application transmission buffers:
+ * - Use a simple arithmetic calculation: at boot time the application should use this function
+ * to find out the total amount of buffers available to it and store it in a variable.
+ * Every time a packet that consumes an application buffer is sent using any of the
+ * exposed functions in this BLE API, the application should decrement that variable.
+ * Conversely, whenever a @ref BLE_EVT_TX_COMPLETE event is received by the application
+ * it should retrieve the count field in such event and add that number to the same
+ * variable storing the number of available packets.
+ * This mechanism allows the application to be aware at any time of the number of
+ * application packets available in the BLE stack's internal buffers, and therefore
+ * it can know with certainty whether it is possible to send more data or it has to
+ * wait for a @ref BLE_EVT_TX_COMPLETE event before it proceeds.
+ * - Choose to simply not keep track of available buffers at all, and instead handle the
+ * @ref BLE_ERROR_NO_TX_BUFFERS error by queueing the packet to be transmitted and
+ * try again as soon as a @ref BLE_EVT_TX_COMPLETE event arrives.
+ *
+ * The API functions that <b>may</b> consume an application buffer depending on
+ * the parameters supplied to them can be found below:
+ *
+ * - @ref sd_ble_gattc_write (write witout response only)
+ * - @ref sd_ble_gatts_hvx (notifications only)
+ * - @ref sd_ble_l2cap_tx (all packets)
+ *
+ * @param[out] p_count Pointer to a uint8_t which will contain the number of application transmission buffers upon
+ * successful return.
+ *
+ * @return @ref NRF_SUCCESS Number of application transmission buffers retrieved successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ */
+SVCALL(SD_BLE_TX_BUFFER_COUNT_GET, uint32_t, sd_ble_tx_buffer_count_get(uint8_t* p_count));
+
+
+/**@brief Add a Vendor Specific UUID.
+ *
+ * @details This call enables the application to add a vendor specific UUID to the BLE stack's table,
+ * for later use all other modules and APIs. This then allows the application to use the shorter,
+ * 24-bit @ref ble_uuid_t format when dealing with both 16-bit and 128-bit UUIDs without having to
+ * check for lengths and having split code paths. The way that this is accomplished is by extending the
+ * grouping mechanism that the Bluetooth SIG standard base UUID uses for all other 128-bit UUIDs. The
+ * type field in the @ref ble_uuid_t structure is an index (relative to @ref BLE_UUID_TYPE_VENDOR_BEGIN)
+ * to the table populated by multiple calls to this function, and the uuid field in the same structure
+ * contains the 2 bytes at indices 12 and 13. The number of possible 128-bit UUIDs available to the
+ * application is therefore the number of Vendor Specific UUIDs added with the help of this function times 65536,
+ * although restricted to modifying bytes 12 and 13 for each of the entries in the supplied array.
+ *
+ * @note Bytes 12 and 13 of the provided UUID will not be used internally, since those are always replaced by
+ * the 16-bit uuid field in @ref ble_uuid_t.
+ *
+ *
+ * @param[in] p_vs_uuid Pointer to a 16-octet (128-bit) little endian Vendor Specific UUID disregarding
+ * bytes 12 and 13.
+ * @param[out] p_uuid_type Pointer where the type field in @ref ble_uuid_t corresponding to this UUID will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully added the Vendor Specific UUID.
+ * @return @ref NRF_ERROR_INVALID_ADDR If p_vs_uuid or p_uuid_type is NULL or invalid.
+ * @return @ref NRF_ERROR_NO_MEM If there are no more free slots for VS UUIDs.
+ * @return @ref NRF_ERROR_FORBIDDEN If p_vs_uuid has already been added to the VS UUID table.
+ */
+SVCALL(SD_BLE_UUID_VS_ADD, uint32_t, sd_ble_uuid_vs_add(ble_uuid128_t const * const p_vs_uuid, uint8_t * const p_uuid_type));
+
+
+/** @brief Decode little endian raw UUID bytes (16-bit or 128-bit) into a 24 bit @ref ble_uuid_t structure.
+ *
+ * @details The raw UUID bytes excluding bytes 12 and 13 (i.e. bytes 0-11 and 14-15) of p_uuid_le are compared
+ * to the corresponding ones in each entry of the table of vendor specific UUIDs pouplated with @ref sd_ble_uuid_vs_add
+ * to look for a match. If there is such a match, bytes 12 and 13 are returned as p_uuid->uuid and the index
+ * relative to @ref BLE_UUID_TYPE_VENDOR_BEGIN as p_uuid->type.
+ *
+ * @note If the UUID length supplied is 2, then the type set by this call will always be @ref BLE_UUID_TYPE_BLE.
+ *
+ * @param[in] uuid_le_len Length in bytes of the buffer pointed to by p_uuid_le (must be 2 or 16 bytes).
+ * @param[in] p_uuid_le Pointer pointing to little endian raw UUID bytes.
+ * @param[in,out] p_uuid Pointer to a @ref ble_uuid_t structure to be filled in.
+ *
+ * @return @ref NRF_SUCCESS Successfully decoded into the @ref ble_uuid_t structure.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_LENGTH Invalid UUID length.
+ * @return @ref NRF_ERROR_NOT_FOUND For a 128-bit UUID, no match in the populated table of UUIDs.
+ */
+SVCALL(SD_BLE_UUID_DECODE, uint32_t, sd_ble_uuid_decode(uint8_t uuid_le_len, uint8_t const * const p_uuid_le, ble_uuid_t * const p_uuid));
+
+
+/** @brief Encode a @ref ble_uuid_t structure into little endian raw UUID bytes (16-bit or 128-bit).
+ *
+ * @note The pointer to the destination buffer p_uuid_le may be NULL, in which case only the validitiy and size of p_uuid is computed.
+ *
+ * @param[in] p_uuid Pointer to a @ref ble_uuid_t structure that will be encoded into bytes.
+ * @param[out] p_uuid_le_len Pointer to a uint8_t that will be filled with the encoded length (2 or 16 bytes).
+ * @param[out] p_uuid_le Pointer to a buffer where the little endian raw UUID bytes (2 or 16) will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully encoded into the buffer.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid UUID type.
+ */
+SVCALL(SD_BLE_UUID_ENCODE, uint32_t, sd_ble_uuid_encode(ble_uuid_t const * const p_uuid, uint8_t * const p_uuid_le_len, uint8_t * const p_uuid_le));
+
+
+/**@brief Get Version Information.
+ *
+ * @details This call allows the application to get the BLE stack version information.
+ *
+ * @param[in] p_version Pointer to ble_version_t structure to be filled in.
+ *
+ * @return @ref NRF_SUCCESS Version information stored successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY The stack is busy (typically doing a locally-initiated disconnection procedure).
+ */
+SVCALL(SD_BLE_VERSION_GET, uint32_t, sd_ble_version_get(ble_version_t * p_version));
+
+
+/**@brief Provide a user memory block.
+ *
+ * @note This call can only be used as a response to a @ref BLE_EVT_USER_MEM_REQUEST event issued to the application.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_block Pointer to a user memory block structure.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued a response to the peer.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_STATE No execute write request pending.
+ */
+SVCALL(SD_BLE_USER_MEM_REPLY, uint32_t, sd_ble_user_mem_reply(uint16_t conn_handle, ble_user_mem_block_t *p_block));
+
+#endif /* BLE_H__ */
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/ble_err.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/ble_err.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @addtogroup BLE_COMMON
+ @{
+ @addtogroup nrf_error
+ @{
+ @ingroup BLE_COMMON
+ @}
+
+ @defgroup ble_err General error codes
+ @{
+
+ @brief General error code definitions for the BLE API.
+
+ @ingroup BLE_COMMON
+*/
+#ifndef NRF_BLE_ERR_H__
+#define NRF_BLE_ERR_H__
+
+#include "nrf_error.h"
+
+/* @defgroup BLE_ERRORS Error Codes
+ * @{ */
+#define BLE_ERROR_INVALID_CONN_HANDLE (NRF_ERROR_STK_BASE_NUM+0x001) /**< Invalid connection handle. */
+#define BLE_ERROR_INVALID_ATTR_HANDLE (NRF_ERROR_STK_BASE_NUM+0x002) /**< Invalid attribute handle. */
+#define BLE_ERROR_NO_TX_BUFFERS (NRF_ERROR_STK_BASE_NUM+0x003) /**< Buffer capacity exceeded. */
+/** @} */
+
+
+/** @defgroup BLE_ERROR_SUBRANGES Module specific error code subranges
+ * @brief Assignment of subranges for module specific error codes.
+ * @note For specific error codes, see ble_<module>.h or ble_error_<module>.h.
+ * @{ */
+#define NRF_L2CAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x100) /**< L2CAP specific errors. */
+#define NRF_GAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x200) /**< GAP specific errors. */
+#define NRF_GATTC_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x300) /**< GATT client specific errors. */
+#define NRF_GATTS_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x400) /**< GATT server specific errors. */
+/** @} */
+
+#endif
+
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/ble_gap.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/ble_gap.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,895 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_GAP Generic Access Profile (GAP)
+ @{
+ @brief Definitions and prototypes for the GAP interface.
+ */
+
+#ifndef BLE_GAP_H__
+#define BLE_GAP_H__
+
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "nrf_svc.h"
+
+/**
+ * @brief GAP API SVC numbers.
+ */
+enum BLE_GAP_SVCS
+{
+ SD_BLE_GAP_ADDRESS_SET = BLE_GAP_SVC_BASE, /**< Set own Bluetooth Address. */
+ SD_BLE_GAP_ADDRESS_GET, /**< Get own Bluetooth Address. */
+ SD_BLE_GAP_ADV_DATA_SET, /**< Set Advertisement Data. */
+ SD_BLE_GAP_ADV_START, /**< Start Advertising. */
+ SD_BLE_GAP_ADV_STOP, /**< Stop Advertising. */
+ SD_BLE_GAP_CONN_PARAM_UPDATE, /**< Connection Parameter Update. */
+ SD_BLE_GAP_DISCONNECT, /**< Disconnect. */
+ SD_BLE_GAP_TX_POWER_SET, /**< Set TX Power. */
+ SD_BLE_GAP_APPEARANCE_SET, /**< Set Appearance. */
+ SD_BLE_GAP_APPEARANCE_GET, /**< Get Appearance. */
+ SD_BLE_GAP_PPCP_SET, /**< Set PPCP. */
+ SD_BLE_GAP_PPCP_GET, /**< Get PPCP. */
+ SD_BLE_GAP_DEVICE_NAME_SET, /**< Set Device Name. */
+ SD_BLE_GAP_DEVICE_NAME_GET, /**< Get Device Name. */
+ SD_BLE_GAP_AUTHENTICATE, /**< Initiate Pairing/Bonding. */
+ SD_BLE_GAP_SEC_PARAMS_REPLY, /**< Reply with Security Parameters. */
+ SD_BLE_GAP_AUTH_KEY_REPLY, /**< Reply with an authentication key. */
+ SD_BLE_GAP_SEC_INFO_REPLY, /**< Reply with Security Information. */
+ SD_BLE_GAP_CONN_SEC_GET, /**< Obtain connection security level. */
+ SD_BLE_GAP_RSSI_START, /**< Start reporting of changes in RSSI. */
+ SD_BLE_GAP_RSSI_STOP, /**< Stop reporting of changes in RSSI. */
+};
+
+
+/** @addtogroup BLE_GAP_DEFINES Defines
+ * @{ */
+
+/** @defgroup BLE_ERRORS_GAP SVC return values specific to GAP
+ * @{ */
+#define BLE_ERROR_GAP_UUID_LIST_MISMATCH (NRF_GAP_ERR_BASE + 0x000) /**< UUID list does not contain an integral number of UUIDs. */
+#define BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST (NRF_GAP_ERR_BASE + 0x001) /**< Use of Whitelist not permitted with discoverable advertising. */
+#define BLE_ERROR_GAP_INVALID_BLE_ADDR (NRF_GAP_ERR_BASE + 0x002) /**< The upper two bits of the address do not correspond to the specified address type. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_ROLES GAP Roles
+ * @note Not explicitly used in peripheral API, but will be relevant for central API.
+ * @{ */
+#define BLE_GAP_ROLE_INVALID 0x0 /**< Invalid Role. */
+#define BLE_GAP_ROLE_PERIPH 0x1 /**< Peripheral Role. */
+#define BLE_GAP_ROLE_CENTRAL 0x2 /**< Central Role. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_TIMEOUT_SOURCES GAP Timeout sources
+ * @{ */
+#define BLE_GAP_TIMEOUT_SRC_ADVERTISEMENT 0x00 /**< Advertisement timeout. */
+#define BLE_GAP_TIMEOUT_SRC_SECURITY_REQUEST 0x01 /**< Security request timeout. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_ADDR_TYPES GAP Address types
+ * @{ */
+#define BLE_GAP_ADDR_TYPE_PUBLIC 0x00 /**< Public address. */
+#define BLE_GAP_ADDR_TYPE_RANDOM_STATIC 0x01 /**< Random Static address. */
+#define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE 0x02 /**< Private Resolvable address. */
+#define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE 0x03 /**< Private Non-Resolvable address. */
+/** @} */
+
+
+/** @brief BLE address length. */
+#define BLE_GAP_ADDR_LEN 6
+
+
+/** @defgroup BLE_GAP_AD_TYPE_DEFINITIONS GAP Advertising and Scan Response Data format
+ * @note Found at https://www.bluetooth.org/Technical/AssignedNumbers/generic_access_profile.htm
+ * @{ */
+#define BLE_GAP_AD_TYPE_FLAGS 0x01 /**< Flags for discoverability. */
+#define BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_MORE_AVAILABLE 0x02 /**< Partial list of 16 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_COMPLETE 0x03 /**< Complete list of 16 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_MORE_AVAILABLE 0x04 /**< Partial list of 32 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_COMPLETE 0x05 /**< Complete list of 32 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_MORE_AVAILABLE 0x06 /**< Partial list of 128 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_COMPLETE 0x07 /**< Complete list of 128 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_SHORT_LOCAL_NAME 0x08 /**< Short local device name. */
+#define BLE_GAP_AD_TYPE_COMPLETE_LOCAL_NAME 0x09 /**< Complete local device name. */
+#define BLE_GAP_AD_TYPE_TX_POWER_LEVEL 0x0A /**< Transmit power level. */
+#define BLE_GAP_AD_TYPE_CLASS_OF_DEVICE 0x0D /**< Class of device. */
+#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_HASH_C 0x0E /**< Simple Pairing Hash C. */
+#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_RANDOMIZER_R 0x0F /**< Simple Pairing Randomizer R. */
+#define BLE_GAP_AD_TYPE_SECURITY_MANAGER_TK_VALUE 0x10 /**< Security Manager TK Value. */
+#define BLE_GAP_AD_TYPE_SECURITY_MANAGER_OOB_FLAGS 0x11 /**< Security Manager Out Of Band Flags. */
+#define BLE_GAP_AD_TYPE_SLAVE_CONNECTION_INTERVAL_RANGE 0x12 /**< Slave Connection Interval Range. */
+#define BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_16BIT 0x14 /**< List of 16-bit Service Solicitation UUIDs. */
+#define BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_128BIT 0x15 /**< List of 128-bit Service Solicitation UUIDs. */
+#define BLE_GAP_AD_TYPE_SERVICE_DATA 0x16 /**< Service Data. */
+#define BLE_GAP_AD_TYPE_PUBLIC_TARGET_ADDRESS 0x17 /**< Public Target Address. */
+#define BLE_GAP_AD_TYPE_RANDOM_TARGET_ADDRESS 0x18 /**< Random Target Address. */
+#define BLE_GAP_AD_TYPE_APPEARANCE 0x19 /**< Appearance. */
+#define BLE_GAP_AD_TYPE_MANUFACTURER_SPECIFIC_DATA 0xFF /**< Manufacturer Specific Data. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_ADV_FLAGS GAP Advertisement Flags
+ * @{ */
+#define BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE (0x01) /**< LE Limited Discoverable Mode. */
+#define BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE (0x02) /**< LE General Discoverable Mode. */
+#define BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED (0x04) /**< BR/EDR not supported. */
+#define BLE_GAP_ADV_FLAG_LE_BR_EDR_CONTROLLER (0x08) /**< Simultaneous LE and BR/EDR, Controller. */
+#define BLE_GAP_ADV_FLAG_LE_BR_EDR_HOST (0x10) /**< Simultaneous LE and BR/EDR, Host. */
+#define BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE (BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE | BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED) /**< LE Limited Discoverable Mode, BR/EDR not supported. */
+#define BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE (BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE | BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED) /**< LE General Discoverable Mode, BR/EDR not supported. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_ADV_INTERVALS GAP Advertising interval max and min
+ * @{ */
+#define BLE_GAP_ADV_INTERVAL_MIN 0x0020 /**< Minimum Advertising interval in 625 us units, i.e. 20 ms. */
+#define BLE_GAP_ADV_NONCON_INTERVAL_MIN 0x00A0 /**< Minimum Advertising interval in 625 us units for non connectable mode, i.e. 100 ms. */
+#define BLE_GAP_ADV_INTERVAL_MAX 0x4000 /**< Maximum Advertising interval in 625 us units, i.e. 10.24 s. */
+ /** @} */
+
+
+/** @brief Maximum size of advertising data in octets. */
+#define BLE_GAP_ADV_MAX_SIZE 31
+
+
+/** @defgroup BLE_GAP_ADV_TYPES GAP Advertising types
+ * @{ */
+#define BLE_GAP_ADV_TYPE_ADV_IND 0x00 /**< Connectable undirected. */
+#define BLE_GAP_ADV_TYPE_ADV_DIRECT_IND 0x01 /**< Connectable directed. */
+#define BLE_GAP_ADV_TYPE_ADV_SCAN_IND 0x02 /**< Scannable undirected. */
+#define BLE_GAP_ADV_TYPE_ADV_NONCONN_IND 0x03 /**< Non connectable undirected. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_ADV_FILTER_POLICIES GAP Advertising filter policies
+ * @{ */
+#define BLE_GAP_ADV_FP_ANY 0x00 /**< Allow scan requests and connect requests from any device. */
+#define BLE_GAP_ADV_FP_FILTER_SCANREQ 0x01 /**< Filter scan requests with whitelist. */
+#define BLE_GAP_ADV_FP_FILTER_CONNREQ 0x02 /**< Filter connect requests with whitelist. */
+#define BLE_GAP_ADV_FP_FILTER_BOTH 0x03 /**< Filter both scan and connect requests with whitelist. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_ADV_TIMEOUT_VALUES GAP Advertising timeout values
+ * @{ */
+#define BLE_GAP_ADV_TIMEOUT_LIMITED_MAX 180 /**< Maximum advertising time in limited discoverable mode (TGAP(lim_adv_timeout) = 180s in spec (Addendum 2)). */
+#define BLE_GAP_ADV_TIMEOUT_GENERAL_UNLIMITED 0 /**< Unlimited advertising in general discoverable mode. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_DISC_MODES GAP Discovery modes
+ * @{ */
+#define BLE_GAP_DISC_MODE_NOT_DISCOVERABLE 0x00 /**< Not discoverable discovery Mode. */
+#define BLE_GAP_DISC_MODE_LIMITED 0x01 /**< Limited Discovery Mode. */
+#define BLE_GAP_DISC_MODE_GENERAL 0x02 /**< General Discovery Mode. */
+/** @} */
+
+/** @defgroup BLE_GAP_IO_CAPS GAP IO Capabilities
+ * @{ */
+#define BLE_GAP_IO_CAPS_DISPLAY_ONLY 0x00 /**< Display Only. */
+#define BLE_GAP_IO_CAPS_DISPLAY_YESNO 0x01 /**< Display and Yes/No entry. */
+#define BLE_GAP_IO_CAPS_KEYBOARD_ONLY 0x02 /**< Keyboard Only. */
+#define BLE_GAP_IO_CAPS_NONE 0x03 /**< No I/O capabilities. */
+#define BLE_GAP_IO_CAPS_KEYBOARD_DISPLAY 0x04 /**< Keyboard and Display. */
+/** @} */
+
+
+/** @defgroup BLE_GAP_AUTH_KEY_TYPES GAP Authentication Key Types
+ * @{ */
+#define BLE_GAP_AUTH_KEY_TYPE_NONE 0x00 /**< No key (may be used to reject). */
+#define BLE_GAP_AUTH_KEY_TYPE_PASSKEY 0x01 /**< 6-digit Passkey. */
+#define BLE_GAP_AUTH_KEY_TYPE_OOB 0x02 /**< Out Of Band data. */
+/** @} */
+
+/** @defgroup BLE_GAP_SEC_STATUS GAP Security status
+ * @{ */
+#define BLE_GAP_SEC_STATUS_SUCCESS 0x00 /**< Successful parameters. */
+#define BLE_GAP_SEC_STATUS_TIMEOUT 0x01 /**< Procedure timed out. */
+#define BLE_GAP_SEC_STATUS_PDU_INVALID 0x02 /**< Invalid PDU received. */
+#define BLE_GAP_SEC_STATUS_PASSKEY_ENTRY_FAILED 0x81 /**< Passkey entry failed (user cancelled or other). */
+#define BLE_GAP_SEC_STATUS_OOB_NOT_AVAILABLE 0x82 /**< Out of Band Key not available. */
+#define BLE_GAP_SEC_STATUS_AUTH_REQ 0x83 /**< Authentication requirements not met. */
+#define BLE_GAP_SEC_STATUS_CONFIRM_VALUE 0x84 /**< Confirm value failed. */
+#define BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP 0x85 /**< Pairing not supported. */
+#define BLE_GAP_SEC_STATUS_ENC_KEY_SIZE 0x86 /**< Encryption key size. */
+#define BLE_GAP_SEC_STATUS_SMP_CMD_UNSUPPORTED 0x87 /**< Unsupported SMP command. */
+#define BLE_GAP_SEC_STATUS_UNSPECIFIED 0x88 /**< Unspecified reason. */
+#define BLE_GAP_SEC_STATUS_REPEATED_ATTEMPTS 0x89 /**< Too little time elapsed since last attempt. */
+#define BLE_GAP_SEC_STATUS_INVALID_PARAMS 0x8A /**< Invalid parameters. */
+/** @} */
+
+/** @defgroup BLE_GAP_SEC_STATUS_SOURCES GAP Security status sources
+ * @{ */
+#define BLE_GAP_SEC_STATUS_SOURCE_LOCAL 0x00 /**< Local failure. */
+#define BLE_GAP_SEC_STATUS_SOURCE_REMOTE 0x01 /**< Remote failure. */
+/** @} */
+
+/** @defgroup BLE_GAP_CP_LIMITS GAP Connection Parameters Limits
+ * @{ */
+#define BLE_GAP_CP_MIN_CONN_INTVL_NONE 0xFFFF /**< No new minimum connction interval specified in connect parameters. */
+#define BLE_GAP_CP_MIN_CONN_INTVL_MIN 0x0006 /**< Lowest mimimum connection interval permitted, in units of 1.25 ms, i.e. 7.5 ms. */
+#define BLE_GAP_CP_MIN_CONN_INTVL_MAX 0x0C80 /**< Highest minimum connection interval permitted, in units of 1.25 ms, i.e. 4 s. */
+#define BLE_GAP_CP_MAX_CONN_INTVL_NONE 0xFFFF /**< No new maximum connction interval specified in connect parameters. */
+#define BLE_GAP_CP_MAX_CONN_INTVL_MIN 0x0006 /**< Lowest maximum connection interval permitted, in units of 1.25 ms, i.e. 7.5 ms. */
+#define BLE_GAP_CP_MAX_CONN_INTVL_MAX 0x0C80 /**< Highest maximum connection interval permitted, in units of 1.25 ms, i.e. 4 s. */
+#define BLE_GAP_CP_SLAVE_LATENCY_MAX 0x03E8 /**< Highest slave latency permitted, in connection events. */
+#define BLE_GAP_CP_CONN_SUP_TIMEOUT_NONE 0xFFFF /**< No new supervision timeout specified in connect parameters. */
+#define BLE_GAP_CP_CONN_SUP_TIMEOUT_MIN 0x000A /**< Lowest supervision timeout permitted, in units of 10 ms, i.e. 100 ms. */
+#define BLE_GAP_CP_CONN_SUP_TIMEOUT_MAX 0x0C80 /**< Highest supervision timeout permitted, in units of 10 ms, i.e. 32 s. */
+/** @} */
+
+
+/**@brief GAP device name maximum length. */
+#define BLE_GAP_DEVNAME_MAX_LEN 31
+
+
+/** @defgroup BLE_GAP_CONN_SEC_MODE_SET_MACROS GAP attribute security requirement setters
+ *
+ * See @ref ble_gap_conn_sec_mode_t.
+ * @{ */
+/** @brief Set sec_mode pointed to by ptr to have no access rights.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(ptr) do {(ptr)->sm = 0; (ptr)->lv = 0;} while(0)
+/** @brief Set sec_mode pointed to by ptr to require no protection, open link.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_OPEN(ptr) do {(ptr)->sm = 1; (ptr)->lv = 1;} while(0)
+/** @brief Set sec_mode pointed to by ptr to require encryption, but no MITM protection.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 2;} while(0)
+/** @brief Set sec_mode pointed to by ptr to require encryption and MITM protection.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_ENC_WITH_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 3;} while(0)
+/** @brief Set sec_mode pointed to by ptr to require signing or encryption, no MITM protection needed.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_SIGNED_NO_MITM(ptr) do {(ptr)->sm = 2; (ptr)->lv = 1;} while(0)
+/** @brief Set sec_mode pointed to by ptr to require signing or encryption with MITM protection.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_SIGNED_WITH_MITM(ptr) do {(ptr)->sm = 2; (ptr)->lv = 2;} while(0)
+/** @} */
+
+
+/**@brief GAP Security Key Length. */
+#define BLE_GAP_SEC_KEY_LEN 16
+
+/**@brief Maximum amount of addresses in a whitelist. */
+#define BLE_GAP_WHITELIST_ADDR_MAX_COUNT (8)
+
+/**@brief Maximum amount of IRKs in a whitelist.
+ * @note The number of IRKs is limited to 8, even if the hardware supports more.
+ */
+#define BLE_GAP_WHITELIST_IRK_MAX_COUNT (8)
+
+/** @defgroup GAP_SEC_MODES GAP Security Modes
+ * @{ */
+#define BLE_GAP_SEC_MODE 0x00 /**< No key (may be used to reject). */
+
+/** @} */
+
+
+/** @} */
+
+/**@brief Bluetooth Low Energy address. */
+typedef struct
+{
+ uint8_t addr_type; /**< See @ref BLE_GAP_ADDR_TYPES. */
+ uint8_t addr[BLE_GAP_ADDR_LEN]; /**< 48-bit address, LSB format. */
+} ble_gap_addr_t;
+
+
+/**@brief GAP connection parameters.
+ *
+ * @note When ble_conn_params_t is received in an event, both min_conn_interval and
+ * max_conn_interval will be equal to the connection interval set by the central.
+ */
+typedef struct
+{
+ uint16_t min_conn_interval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
+ uint16_t max_conn_interval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
+ uint16_t slave_latency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
+ uint16_t conn_sup_timeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
+} ble_gap_conn_params_t;
+
+
+/**@brief GAP link requirements.
+ *
+ * See Bluetooth Core specification, Volume 3 Part C 10.2 for details.
+ *
+ * Security Mode 0 Level 0: No access permissions at all (this level is not defined by the Bluetooth Core specification).\n
+ * Security Mode 1 Level 1: No security is needed (aka open link).\n
+ * Security Mode 1 Level 2: Encrypted link required, MITM protection not necessary.\n
+ * Security Mode 1 Level 3: MITM protected encrypted link required.\n
+ * Security Mode 2 Level 1: Signing or encryption required, MITM protection not necessary.\n
+ * Security Mode 2 Level 2: MITM protected signing required, unless link is MITM protected encrypted.\n
+ */
+typedef struct
+{
+ uint8_t sm : 4; /**< Security Mode (1 or 2), 0 for no permissions at all. */
+ uint8_t lv : 4; /**< Level (1, 2 or 3), 0 for no permissions at all. */
+
+} ble_gap_conn_sec_mode_t;
+
+
+
+/**@brief GAP connection security status.*/
+typedef struct
+{
+ ble_gap_conn_sec_mode_t sec_mode; /**< Currently active security mode for this connection.*/
+ uint8_t encr_key_size; /**< Length of currently active encryption key, 7 to 16 octets.*/
+} ble_gap_conn_sec_t;
+
+
+
+/**@brief Identity Resolving Key. */
+typedef struct
+{
+ uint8_t irk[BLE_GAP_SEC_KEY_LEN]; /**< Array containing IRK. */
+} ble_gap_irk_t;
+
+
+/**@brief Whitelist structure. */
+typedef struct
+{
+ ble_gap_addr_t ** pp_addrs; /**< Pointer to array of device address pointers, pointing to addresses to be used in whitelist. NULL if none are given. */
+ uint8_t addr_count; /**< Count of device addresses in array, up to @ref BLE_GAP_WHITELIST_ADDR_MAX_COUNT. */
+ ble_gap_irk_t ** pp_irks; /**< Pointer to array of Identity Resolving Key (IRK) pointers, each pointing to an IRK in the whitelist. NULL if none are given. */
+ uint8_t irk_count; /**< Count of IRKs in array, up to @ref BLE_GAP_WHITELIST_IRK_MAX_COUNT. */
+} ble_gap_whitelist_t;
+
+
+/**@brief GAP advertising parameters.*/
+typedef struct
+{
+ uint8_t type; /**< See @ref BLE_GAP_ADV_TYPES. */
+ ble_gap_addr_t* p_peer_addr; /**< For BLE_GAP_CONN_MODE_DIRECTED mode only, known peer address. */
+ uint8_t fp; /**< Filter Policy, see @ref BLE_GAP_ADV_FILTER_POLICIES. */
+ ble_gap_whitelist_t * p_whitelist; /**< Pointer to whitelist, NULL if none is given. */
+ uint16_t interval; /**< Advertising interval between 0x0020 and 0x4000 in 0.625 ms units (20ms to 10.24s), see @ref BLE_GAP_ADV_INTERVALS. This parameter must be set to 0 if type equals @ref BLE_GAP_ADV_TYPE_ADV_DIRECT_IND. */
+ uint16_t timeout; /**< Advertising timeout between 0x0001 and 0x3FFF in seconds, 0x0000 disables timeout. See also @ref BLE_GAP_ADV_TIMEOUT_VALUES. This parameter must be set to 0 if type equals @ref BLE_GAP_ADV_TYPE_ADV_DIRECT_IND. */
+} ble_gap_adv_params_t;
+
+
+/**@brief GAP scanning parameters. */
+typedef struct
+{
+ uint8_t filter; /**< Filter based on discovery mode, see @ref BLE_GAP_DISC_MODES. */
+ uint8_t active : 1; /**< If 1, perform active scanning (scan requests). */
+ uint8_t selective : 1; /**< If 1, ignore unknown devices (non whitelisted). */
+ uint16_t interval; /**< Scan interval between 0x0020 and 0x4000 in 0.625ms units (20ms to 10.24s). */
+ uint16_t window; /**< Scan window between 0x0004 and 0x4000 in 0.625ms units (2.5ms to 10.24s). */
+ uint16_t timeout; /**< Scan timeout between 0x0001 and 0x3FFF in seconds, 0x0000 disables timeout. */
+} ble_gap_scan_params_t;
+
+
+/**@brief GAP security parameters. */
+typedef struct
+{
+ uint16_t timeout; /**< Timeout for SMP transactions or Security Request in seconds, see @ref sd_ble_gap_authenticate and @ref sd_ble_gap_sec_params_reply for more information. */
+ uint8_t bond : 1; /**< Perform bonding. */
+ uint8_t mitm : 1; /**< Man In The Middle protection required. */
+ uint8_t io_caps : 3; /**< IO capabilities, see @ref BLE_GAP_IO_CAPS. */
+ uint8_t oob : 1; /**< Out Of Band data available. */
+ uint8_t min_key_size; /**< Minimum encryption key size in octets between 7 and 16. */
+ uint8_t max_key_size; /**< Maximum encryption key size in octets between min_key_size and 16. */
+} ble_gap_sec_params_t;
+
+
+/**@brief GAP Encryption Information. */
+typedef struct
+{
+ uint16_t div; /**< Encryption Diversifier. */
+ uint8_t ltk[BLE_GAP_SEC_KEY_LEN]; /**< Long Term Key. */
+ uint8_t auth : 1; /**< Authenticated Key. */
+ uint8_t ltk_len : 7; /**< LTK length in octets. */
+} ble_gap_enc_info_t;
+
+
+/**@brief GAP Master Identification. */
+typedef struct
+{
+ uint16_t ediv; /**< Encrypted Diversifier. */
+ uint8_t rand[8]; /**< Random Number. */
+} ble_gap_master_id_t;
+
+
+/**@brief GAP Identity Information. */
+typedef struct
+{
+ ble_gap_addr_t addr; /**< Bluetooth address to which this key applies. */
+ uint8_t irk[BLE_GAP_SEC_KEY_LEN]; /**< Identity Resolution Key. */
+} ble_gap_id_info_t;
+
+
+/**@brief GAP Signing Information. */
+typedef struct
+{
+ uint8_t csrk[BLE_GAP_SEC_KEY_LEN]; /* Connection Signature Resolving Key. */
+} ble_gap_sign_info_t;
+
+
+
+/**
+ * @brief GAP Event IDs.
+ * Those IDs uniquely identify an event coming from the stack to the application.
+ */
+enum BLE_GAP_EVTS
+{
+ BLE_GAP_EVT_CONNECTED = BLE_GAP_EVT_BASE, /**< Connection established. */
+ BLE_GAP_EVT_DISCONNECTED, /**< Disconnected from peer. */
+ BLE_GAP_EVT_CONN_PARAM_UPDATE, /**< Connection Parameters updated. */
+ BLE_GAP_EVT_SEC_PARAMS_REQUEST, /**< Request to provide security parameters. */
+ BLE_GAP_EVT_SEC_INFO_REQUEST, /**< Request to provide security information. */
+ BLE_GAP_EVT_PASSKEY_DISPLAY, /**< Request to display a passkey to the user. */
+ BLE_GAP_EVT_AUTH_KEY_REQUEST, /**< Request to provide an authentication key. */
+ BLE_GAP_EVT_AUTH_STATUS, /**< Authentication procedure completed with status. */
+ BLE_GAP_EVT_CONN_SEC_UPDATE, /**< Connection security updated. */
+ BLE_GAP_EVT_TIMEOUT, /**< Timeout expired. */
+ BLE_GAP_EVT_RSSI_CHANGED, /**< Signal strength measurement report. */
+};
+
+
+/** @brief Event data for connected event. */
+typedef struct
+{
+ ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. */
+ uint8_t irk_match :1; /**< If 1, peer device's address resolved using an IRK. */
+ uint8_t irk_match_idx :7; /**< Index in IRK list where the address was matched. */
+ ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */
+} ble_gap_evt_connected_t;
+
+
+/** @brief Event data for disconnected event. */
+typedef struct
+{
+ uint8_t reason; /**< HCI error code. */
+} ble_gap_evt_disconnected_t;
+
+
+/** @brief Event data for connection parameter update event. */
+typedef struct
+{
+ ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */
+} ble_gap_evt_conn_param_update_t;
+
+
+/** @brief Event data for security parameters request event. */
+typedef struct
+{
+ ble_gap_sec_params_t peer_params; /**< Initiator Security Parameters. */
+} ble_gap_evt_sec_params_request_t;
+
+
+/** @brief Event data for securito info request event. */
+typedef struct
+{
+ ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. */
+ uint16_t div; /**< Encryption diversifier for LTK lookup. */
+ uint8_t enc_info : 1; /**< If 1, Encryption Information required. */
+ uint8_t id_info : 1; /**< If 1, Identity Information required. */
+ uint8_t sign_info : 1; /**< If 1, Signing Information required. */
+} ble_gap_evt_sec_info_request_t;
+
+
+/** @brief Event data for passkey display event. */
+typedef struct
+{
+ uint8_t passkey[6]; /**< 6-digit passkey in ASCII ('0'-'9' digits only). */
+} ble_gap_evt_passkey_display_t;
+
+
+/** @brief Event data for authentication key request event. */
+typedef struct
+{
+ uint8_t key_type; /**< See @ref BLE_GAP_AUTH_KEY_TYPES. */
+} ble_gap_evt_auth_key_request_t;
+
+
+/** @brief Security levels supported.
+ * @note See Bluetooth Specification Version 4.0 Volume 3, Chapter 10.
+*/
+typedef struct
+{
+ uint8_t lv1 : 1; /**< If 1: Level 1 is supported. */
+ uint8_t lv2 : 1; /**< If 1: Level 2 is supported. */
+ uint8_t lv3 : 1; /**< If 1: Level 3 is supported. */
+} ble_gap_sec_levels_t;
+
+
+/** @brief Keys that have been exchanged. */
+typedef struct
+{
+ uint8_t ltk : 1; /**< Long Term Key. */
+ uint8_t ediv_rand : 1; /**< Encrypted Diversifier and Random value. */
+ uint8_t irk : 1; /**< Identity Resolving Key. */
+ uint8_t address : 1; /**< Public or static random address. */
+ uint8_t csrk : 1; /**< Connection Signature Resolving Key. */
+} ble_gap_sec_keys_t;
+
+
+/** @brief Event data for authentication status event. */
+typedef struct
+{
+ uint8_t auth_status; /**< Authentication status, see @ref BLE_GAP_SEC_STATUS. */
+ uint8_t error_src; /**< On error, source that caused the failure, see @ref BLE_GAP_SEC_STATUS_SOURCES. */
+ ble_gap_sec_levels_t sm1_levels; /**< Levels supported in Security Mode 1. */
+ ble_gap_sec_levels_t sm2_levels; /**< Levels supported in Security Mode 2. */
+ ble_gap_sec_keys_t periph_kex; /**< Bitmap stating which keys were exchanged (distributed) by the peripheral. */
+ ble_gap_sec_keys_t central_kex; /**< Bitmap stating which keys were exchanged (distributed) by the central. */
+ struct periph_keys_t
+ {
+ ble_gap_enc_info_t enc_info; /**< Peripheral's Encryption information. */
+ } periph_keys; /**< Actual keys distributed from the Peripheral to the Central. */
+ struct central_keys_t
+ {
+ ble_gap_irk_t irk; /**< Central's IRK. */
+ ble_gap_addr_t id_info; /**< Central's Identity Info. */
+ } central_keys; /**< Actual keys distributed from the Central to the Peripheral. */
+} ble_gap_evt_auth_status_t;
+
+
+/** @brief Event data for connection security update event. */
+typedef struct
+{
+ ble_gap_conn_sec_t conn_sec; /**< Connection security level. */
+} ble_gap_evt_conn_sec_update_t;
+
+
+/** @brief Event data for timeout event. */
+typedef struct
+{
+ uint8_t src; /**< Source of timeout event, see @ref BLE_GAP_TIMEOUT_SOURCES. */
+} ble_gap_evt_timeout_t;
+
+
+/** @brief Event data for advertisement report event. */
+typedef struct
+{
+ int8_t rssi; /**< Received Signal Strength Indication in dBm. */
+} ble_gap_evt_rssi_changed_t;
+
+
+
+/**@brief GAP event callback event structure. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which event occured. */
+ union /**< union alternative identified by evt_id in enclosing struct. */
+ {
+ ble_gap_evt_connected_t connected; /**< Connected Event Parameters. */
+ ble_gap_evt_disconnected_t disconnected; /**< Disconnected Event Parameters. */
+ ble_gap_evt_conn_param_update_t conn_param_update; /**< Connection Parameter Update Parameters. */
+ ble_gap_evt_sec_params_request_t sec_params_request; /**< Security Parameters Request Event Parameters. */
+ ble_gap_evt_sec_info_request_t sec_info_request; /**< Security Information Request Event Parameters. */
+ ble_gap_evt_passkey_display_t passkey_display; /**< Passkey Display Event Parameters. */
+ ble_gap_evt_auth_key_request_t auth_key_request; /**< Authentication Key Request Event Parameters. */
+ ble_gap_evt_auth_status_t auth_status; /**< Authentication Status Event Parameters. */
+ ble_gap_evt_conn_sec_update_t conn_sec_update; /**< Connection Security Update Event Parameters. */
+ ble_gap_evt_timeout_t timeout; /**< Timeout Event Parameters. */
+ ble_gap_evt_rssi_changed_t rssi_changed; /**< RSSI Event parameters. */
+ } params;
+
+} ble_gap_evt_t;
+
+
+/**@brief Set local Bluetooth address.
+ *
+ * @param[in] p_addr Pointer to address structure.
+ *
+ * @return @ref NRF_SUCCESS Address successfully set.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address.
+ * @return @ref NRF_ERROR_BUSY The stack is busy, process pending events and retry.
+ */
+SVCALL(SD_BLE_GAP_ADDRESS_SET, uint32_t, sd_ble_gap_address_set(ble_gap_addr_t const * const p_addr));
+
+
+/**@brief Get local Bluetooth address.
+ *
+ * @param[out] p_addr Pointer to address structure.
+ *
+ * @return @ref NRF_SUCCESS Address successfully retrieved.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ */
+SVCALL(SD_BLE_GAP_ADDRESS_GET, uint32_t, sd_ble_gap_address_get(ble_gap_addr_t * const p_addr));
+
+
+/**@brief Set, clear or update advertisement and scan response data.
+ *
+ * @note The format of the advertisement data will be checked by this call to ensure interoperability.
+ * Limitations imposed by this API call to the data provided include having a flags data type in the scan response data and
+ * duplicating the local name in the advertisement data and scan response data.
+ *
+ * @note: To clear the advertisement data and set it to a 0-length packet, simply provide a valid pointer (p_data/p_sr_data) with its corresponding
+ * length (dlen/srdlen) set to 0.
+ *
+ * @note: The call will fail if p_data and p_sr_data are both NULL since this would have no effect.
+ *
+ * @param[in] p_data Raw data to be placed in advertisement packet. If NULL, no changes are made to the current advertisement packet data.
+ * @param[in] dlen Data length for p_data. Max size: @ref BLE_GAP_ADV_MAX_SIZE octets. Should be 0 if p_data is NULL, can be 0 if p_data is not NULL.
+ * @param[in] p_sr_data Raw data to be placed in scan response packet. If NULL, no changes are made to the current scan response packet data.
+ * @param[in] srdlen Data length for p_sr_data. Max size: @ref BLE_GAP_ADV_MAX_SIZE octets. Should be 0 if p_sr_data is NULL, can be 0 if p_data is not NULL.
+ *
+ * @return @ref NRF_SUCCESS Advertisement data successfully updated or cleared.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_FLAGS Invalid combination of advertising flags supplied.
+ * @return @ref NRF_ERROR_INVALID_DATA Invalid data type(s) supplied, check the advertising data format specification.
+ * @return @ref NRF_ERROR_INVALID_LENGTH Invalid data length(s) supplied.
+ * @return @ref BLE_ERROR_GAP_UUID_LIST_MISMATCH Invalid UUID list supplied.
+ * @return @ref NRF_ERROR_BUSY The stack is busy, process pending events and retry.
+ */
+SVCALL(SD_BLE_GAP_ADV_DATA_SET, uint32_t, sd_ble_gap_adv_data_set(uint8_t const * const p_data, uint8_t dlen, uint8_t const * const p_sr_data, uint8_t srdlen));
+
+
+/**@brief Start advertising (GAP Discoverable, Connectable modes, Broadcast Procedure).
+ *
+ * @param[in] p_adv_params Pointer to advertising parameters structure.
+ *
+ * @return @ref NRF_SUCCESS The BLE stack has started advertising.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check the accepted ranges and limits.
+ * @return @ref BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid Bluetooth address supplied.
+ * @return @ref BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST Discoverable mode and whitelist incompatible.
+ */
+SVCALL(SD_BLE_GAP_ADV_START, uint32_t, sd_ble_gap_adv_start(ble_gap_adv_params_t const * const p_adv_params));
+
+
+/**@brief Stop advertising (GAP Discoverable, Connectable modes, Broadcast Procedure).
+ *
+ * @return @ref NRF_SUCCESS The BLE stack has stopped advertising.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation (most probably not in advertising state).
+ */
+SVCALL(SD_BLE_GAP_ADV_STOP, uint32_t, sd_ble_gap_adv_stop(void));
+
+
+/**@brief Update connection parameters.
+ *
+ * @details In the central role this will initiate a Link Layer connection parameter update procedure,
+ * otherwise in the peripheral role, this will send the corresponding L2CAP request and wait for
+ * the central to perform the procedure. In both cases, and regardless of success or failure, the application
+ * will be informed of the result with a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE event.
+ *
+ * @note If both a connection supervision timeout and a maximum connection interval are specified, then the following constraint
+ * applies: (conn_sup_timeout * 8) >= (max_conn_interval * (slave_latency + 1))
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_conn_params Pointer to desired connection parameters. If NULL is provided on a peripheral role,
+ * the parameters in the PPCP characteristic of the GAP service will be used instead.
+ *
+ * @return @ref NRF_SUCCESS The Connection Update procedure has been started successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints.
+ * @return @ref NRF_ERROR_BUSY Procedure already in progress or not allowed at this time, process pending events and retry.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_GAP_CONN_PARAM_UPDATE, uint32_t, sd_ble_gap_conn_param_update(uint16_t conn_handle, ble_gap_conn_params_t const * const p_conn_params));
+
+
+/**@brief Disconnect (GAP Link Termination).
+ *
+ * @details This call initiates the disconnection procedure, and its completion will be communicated to the application
+ * with a BLE_GAP_EVT_DISCONNECTED event.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] hci_status_code HCI status code, see @ref BLE_HCI_STATUS_CODES (accepted values are BTLE_REMOTE_USER_TERMINATED_CONNECTION and BTLE_CONN_INTERVAL_UNACCEPTABLE).
+ *
+ * @return @ref NRF_SUCCESS The disconnection procedure has been started successfully.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation (disconnection is already in progress or not connected at all).
+ */
+SVCALL(SD_BLE_GAP_DISCONNECT, uint32_t, sd_ble_gap_disconnect(uint16_t conn_handle, uint8_t hci_status_code));
+
+
+/**@brief Set the radio's transmit power.
+ *
+ * @param[in] tx_power Radio transmit power in dBm (accepted values are -40, -30, -20, -16, -12, -8, -4, 0, and 4 dBm).
+ *
+ * @note -40 dBm will not actually give -40 dBm, but will instead be remapped to -30 dBm.
+ *
+ * @return @ref NRF_SUCCESS Successfully changed the transmit power.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_BUSY The stack is busy, process pending events and retry.
+ */
+SVCALL(SD_BLE_GAP_TX_POWER_SET, uint32_t, sd_ble_gap_tx_power_set(int8_t tx_power));
+
+
+/**@brief Set GAP Appearance value.
+ *
+ * @param[in] appearance Appearance (16-bit), see @ref BLE_APPEARANCES.
+ *
+ * @return @ref NRF_SUCCESS Appearance value set successfully.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ */
+SVCALL(SD_BLE_GAP_APPEARANCE_SET, uint32_t, sd_ble_gap_appearance_set(uint16_t appearance));
+
+
+/**@brief Get GAP Appearance value.
+ *
+ * @param[out] p_appearance Appearance (16-bit), see @ref BLE_APPEARANCES.
+ *
+ * @return @ref NRF_SUCCESS Appearance value retrieved successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ */
+SVCALL(SD_BLE_GAP_APPEARANCE_GET, uint32_t, sd_ble_gap_appearance_get(uint16_t * const p_appearance));
+
+
+/**@brief Set GAP Peripheral Preferred Connection Parameters.
+ *
+ * @param[in] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure with the desired parameters.
+ *
+ * @return @ref NRF_SUCCESS Peripheral Preferred Connection Parameters set successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ */
+SVCALL(SD_BLE_GAP_PPCP_SET, uint32_t, sd_ble_gap_ppcp_set(ble_gap_conn_params_t const * const p_conn_params));
+
+
+/**@brief Get GAP Peripheral Preferred Connection Parameters.
+ *
+ * @param[out] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure where the parameters will be stored.
+ *
+ * @return @ref NRF_SUCCESS Peripheral Preferred Connection Parameters retrieved successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ */
+SVCALL(SD_BLE_GAP_PPCP_GET, uint32_t, sd_ble_gap_ppcp_get(ble_gap_conn_params_t * const p_conn_params));
+
+
+/**@brief Set GAP device name.
+ *
+ * @param[in] p_write_perm Write permissions for the Device Name characteristic see @ref ble_gap_conn_sec_mode_t.
+ * @param[in] p_dev_name Pointer to a UTF-8 encoded, <b>non NULL-terminated</b> string.
+ * @param[in] len Length of the UTF-8, <b>non NULL-terminated</b> string pointed to by p_dev_name in octets (must be smaller or equal than @ref BLE_GAP_DEVNAME_MAX_LEN).
+ *
+ * @return @ref NRF_SUCCESS GAP device name and permissions set successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
+ */
+SVCALL(SD_BLE_GAP_DEVICE_NAME_SET, uint32_t, sd_ble_gap_device_name_set(ble_gap_conn_sec_mode_t const * const p_write_perm, uint8_t const * const p_dev_name, uint16_t len));
+
+
+/**@brief Get GAP device name.
+ *
+ * @param[in] p_dev_name Pointer to an empty buffer where the UTF-8 <b>non NULL-terminated</b> string will be placed. Set to NULL to obtain the complete device name length.
+ * @param[in,out] p_len Length of the buffer pointed by p_dev_name, complete device name length on output.
+ *
+ * @note If the device name is longer than the size of the supplied buffer,
+ * p_len will return the complete device name length,
+ * and not the number of bytes actually returned in p_dev_name.
+ * The application may use this information to allocate a suitable buffer size.
+ *
+ * @return @ref NRF_SUCCESS GAP device name retrieved successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
+ */
+SVCALL(SD_BLE_GAP_DEVICE_NAME_GET, uint32_t, sd_ble_gap_device_name_get(uint8_t * const p_dev_name, uint16_t * const p_len));
+
+
+/**@brief Initiate GAP Authentication procedure.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_sec_params Pointer to the @ref ble_gap_sec_params_t structure with the security parameters to be used during the pairing procedure.
+ *
+ * @details In the central role, this function will send an SMP Pairing Request, otherwise in the peripheral role, an SMP Security Request will be sent.
+ * In the peripheral role, only the timeout, bond and mitm fields of @ref ble_gap_sec_params_t are used.
+ *
+ * @note The GAP Authentication procedure may be triggered by the central without calling this function when accessing a secure service.
+ * @note Calling this function may result in the following events depending on the outcome and parameters: @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST,
+ * @ref BLE_GAP_EVT_SEC_INFO_REQUEST, @ref BLE_GAP_EVT_AUTH_KEY_REQUEST, @ref BLE_GAP_EVT_AUTH_STATUS.
+ * @note The timeout parameter in @ref ble_gap_sec_params_t is interpreted here as the Security Request timeout
+ *
+ *
+ * @return @ref NRF_SUCCESS Successfully initiated authentication procedure.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_AUTHENTICATE, uint32_t, sd_ble_gap_authenticate(uint16_t conn_handle, ble_gap_sec_params_t const * const p_sec_params));
+
+
+/**@brief Reply with GAP security parameters.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] sec_status Security status, see @ref BLE_GAP_SEC_STATUS.
+ * @param[in] p_sec_params Pointer to a @ref ble_gap_sec_params_t security parameters structure.
+ *
+ * @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST, calling it at other times will result in an NRF_ERROR_INVALID_STATE.
+ * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters.
+ * @note The timeout parameter in @ref ble_gap_sec_params_t is interpreted here as the SMP procedure timeout, and must be 30 seconds. The function will fail
+ * if the application supplies a different value.
+ *
+ * @return @ref NRF_SUCCESS Successfully accepted security parameter from the application.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_SEC_PARAMS_REPLY, uint32_t, sd_ble_gap_sec_params_reply(uint16_t conn_handle, uint8_t sec_status, ble_gap_sec_params_t const * const p_sec_params));
+
+
+/**@brief Reply with an authentication key.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] key_type See @ref BLE_GAP_AUTH_KEY_TYPES.
+ * @param[in] key If key type is BLE_GAP_AUTH_KEY_TYPE_NONE, then NULL.
+ * If key type is BLE_GAP_AUTH_KEY_TYPE_PASSKEY, then a 6-byte ASCII string (digit 0..9 only, no NULL termination).
+ * If key type is BLE_GAP_AUTH_KEY_TYPE_OOB, then a 16-byte OOB key value in Little Endian format.
+ *
+ * @details This function is only used to reply to a @ref BLE_GAP_EVT_AUTH_KEY_REQUEST, calling it at other times will result in an NRF_ERROR_INVALID_STATE.
+ * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters.
+ *
+ * @return @ref NRF_SUCCESS Authentication key successfully set.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_AUTH_KEY_REPLY, uint32_t, sd_ble_gap_auth_key_reply(uint16_t conn_handle, uint8_t key_type, uint8_t const * const key));
+
+
+/**@brief Reply with GAP security information.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information structure. May be NULL to signal none is available.
+ * @param[in] p_sign_info Pointer to a @ref ble_gap_sign_info_t signing information structure. May be NULL to signal none is available.
+ *
+ * @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_INFO_REQUEST, calling it at other times will result in NRF_ERROR_INVALID_STATE.
+ * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters.
+ * @note Data signing is not implemented yet. p_sign_info must therefore be NULL.
+ *
+ * @return @ref NRF_SUCCESS Successfully accepted security information.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ * @return @ref NRF_ERROR_BUSY The stack is busy, process pending events and retry.
+ */
+SVCALL(SD_BLE_GAP_SEC_INFO_REPLY, uint32_t, sd_ble_gap_sec_info_reply(uint16_t conn_handle, ble_gap_enc_info_t const * const p_enc_info, ble_gap_sign_info_t const * const p_sign_info));
+
+
+/**@brief Get the current connection security.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[out] p_conn_sec Pointer to a @ref ble_gap_conn_sec_t structure to be filled in.
+ *
+ * @return @ref NRF_SUCCESS Current connection security successfully retrieved.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_CONN_SEC_GET, uint32_t, sd_ble_gap_conn_sec_get(uint16_t conn_handle, ble_gap_conn_sec_t * const p_conn_sec));
+
+
+/**@brief Start reporting the received signal strength to the application.
+ *
+ * A new event is reported whenever the RSSI value changes, until @ref sd_ble_gap_rssi_stop is called.
+ *
+ * @param[in] conn_handle Connection handle.
+ *
+ * @return @ref NRF_SUCCESS Successfully activated RSSI reporting.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_RSSI_START, uint32_t, sd_ble_gap_rssi_start(uint16_t conn_handle));
+
+
+/**@brief Stop reporting the received singnal strength.
+ *
+ * An RSSI change detected before the call but not yet received by the application
+ * may be reported after @ref sd_ble_gap_rssi_stop has been called.
+ *
+ * @param[in] conn_handle Connection handle.
+ *
+ * @return @ref NRF_SUCCESS Successfully deactivated RSSI reporting.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_RSSI_STOP, uint32_t, sd_ble_gap_rssi_stop(uint16_t conn_handle));
+
+#endif // BLE_GAP_H__
+
+/**
+ @}
+*/
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/ble_gatt.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/ble_gatt.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,166 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @addtogroup BLE_GATT Generic Attribute Profile (GATT) Common
+ @{
+ @brief Common definitions and prototypes for the GATT interfaces.
+ */
+
+#ifndef BLE_GATT_H__
+#define BLE_GATT_H__
+
+#include "ble_types.h"
+#include "ble_ranges.h"
+
+
+/** @addtogroup BLE_GATT_DEFINES Defines
+ * @{ */
+
+/** @brief Default MTU size. */
+#define GATT_MTU_SIZE_DEFAULT 23
+
+/** @brief Only the default MTU size of 23 is currently supported. */
+#define GATT_RX_MTU 23
+
+
+/**@brief Invalid Attribute Handle. */
+#define BLE_GATT_HANDLE_INVALID 0x0000
+
+/** @defgroup BLE_GATT_TIMEOUT_SOURCES GATT Timeout sources
+ * @{ */
+#define BLE_GATT_TIMEOUT_SRC_PROTOCOL 0x00 /**< ATT Protocol timeout. */
+/** @} */
+
+/** @defgroup BLE_GATT_WRITE_OPS GATT Write operations
+ * @{ */
+#define BLE_GATT_OP_INVALID 0x00 /**< Invalid Operation. */
+#define BLE_GATT_OP_WRITE_REQ 0x01 /**< Write Request. */
+#define BLE_GATT_OP_WRITE_CMD 0x02 /**< Write Command. */
+#define BLE_GATT_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */
+#define BLE_GATT_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */
+#define BLE_GATT_OP_EXEC_WRITE_REQ 0x05 /**< Execute Write Request. */
+/** @} */
+
+/** @defgroup BLE_GATT_EXEC_WRITE_FLAGS GATT Execute Write flags
+ * @{ */
+#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_CANCEL 0x00
+#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_WRITE 0x01
+/** @} */
+
+/** @defgroup BLE_GATT_HVX_TYPES GATT Handle Value operations
+ * @{ */
+#define BLE_GATT_HVX_INVALID 0x00 /**< Invalid Operation. */
+#define BLE_GATT_HVX_NOTIFICATION 0x01 /**< Handle Value Notification. */
+#define BLE_GATT_HVX_INDICATION 0x02 /**< Handle Value Indication. */
+/** @} */
+
+/** @defgroup BLE_GATT_STATUS_CODES GATT Status Codes
+ * @{ */
+#define BLE_GATT_STATUS_SUCCESS 0x0000 /**< Success. */
+#define BLE_GATT_STATUS_UNKNOWN 0x0001 /**< Unknown or not applicable status. */
+#define BLE_GATT_STATUS_ATTERR_INVALID 0x0100 /**< ATT Error: Invalid Error Code. */
+#define BLE_GATT_STATUS_ATTERR_INVALID_HANDLE 0x0101 /**< ATT Error: Invalid Attribute Handle. */
+#define BLE_GATT_STATUS_ATTERR_READ_NOT_PERMITTED 0x0102 /**< ATT Error: Read not permitted. */
+#define BLE_GATT_STATUS_ATTERR_WRITE_NOT_PERMITTED 0x0103 /**< ATT Error: Write not permitted. */
+#define BLE_GATT_STATUS_ATTERR_INVALID_PDU 0x0104 /**< ATT Error: Used in ATT as Invalid PDU. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHENTICATION 0x0105 /**< ATT Error: Authenticated link required. */
+#define BLE_GATT_STATUS_ATTERR_REQUEST_NOT_SUPPORTED 0x0106 /**< ATT Error: Used in ATT as Request Not Supported. */
+#define BLE_GATT_STATUS_ATTERR_INVALID_OFFSET 0x0107 /**< ATT Error: Offset specified was past the end of the attribute. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHORIZATION 0x0108 /**< ATT Error: Used in ATT as Insufficient Authorisation. */
+#define BLE_GATT_STATUS_ATTERR_PREPARE_QUEUE_FULL 0x0109 /**< ATT Error: Used in ATT as Prepare Queue Full. */
+#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_FOUND 0x010A /**< ATT Error: Used in ATT as Attribute not found. */
+#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_LONG 0x010B /**< ATT Error: Attribute cannot be read or written using read/write blob requests. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_ENC_KEY_SIZE 0x010C /**< ATT Error: Encryption key size used is insufficient. */
+#define BLE_GATT_STATUS_ATTERR_INVALID_ATT_VAL_LENGTH 0x010D /**< ATT Error: Invalid value size. */
+#define BLE_GATT_STATUS_ATTERR_UNLIKELY_ERROR 0x010E /**< ATT Error: Very unlikely error. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_ENCRYPTION 0x010F /**< ATT Error: Encrypted link required. */
+#define BLE_GATT_STATUS_ATTERR_UNSUPPORTED_GROUP_TYPE 0x0110 /**< ATT Error: Attribute type is not a supported grouping attribute. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_RESOURCES 0x0111 /**< ATT Error: Encrypted link required. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_BEGIN 0x0112 /**< ATT Error: Reserved for Future Use range #1 begin. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_END 0x017F /**< ATT Error: Reserved for Future Use range #1 end. */
+#define BLE_GATT_STATUS_ATTERR_APP_BEGIN 0x0180 /**< ATT Error: Application range begin. */
+#define BLE_GATT_STATUS_ATTERR_APP_END 0x019F /**< ATT Error: Application range end. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_BEGIN 0x01A0 /**< ATT Error: Reserved for Future Use range #2 begin. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_END 0x01DF /**< ATT Error: Reserved for Future Use range #2 end. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_BEGIN 0x01E0 /**< ATT Error: Reserved for Future Use range #3 begin. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_END 0x01FC /**< ATT Error: Reserved for Future Use range #3 end. */
+#define BLE_GATT_STATUS_ATTERR_CPS_CCCD_CONFIG_ERROR 0x01FD /**< ATT Common Profile and Service Error: Client Characteristic Configuration Descriptor improperly configured. */
+#define BLE_GATT_STATUS_ATTERR_CPS_PROC_ALR_IN_PROG 0x01FE /**< ATT Common Profile and Service Error: Procedure Already in Progress. */
+#define BLE_GATT_STATUS_ATTERR_CPS_OUT_OF_RANGE 0x01FF /**< ATT Common Profile and Service Error: Out Of Range. */
+/** @} */
+
+
+/** @defgroup BLE_GATT_CPF_FORMATS Characteristic Presentation Formats
+ * @note Found at http://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml
+ * @{ */
+#define BLE_GATT_CPF_FORMAT_RFU 0x00 /**< Reserved For Future Use. */
+#define BLE_GATT_CPF_FORMAT_BOOLEAN 0x01 /**< Boolean. */
+#define BLE_GATT_CPF_FORMAT_2BIT 0x02 /**< Unsigned 2-bit integer. */
+#define BLE_GATT_CPF_FORMAT_NIBBLE 0x03 /**< Unsigned 4-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT8 0x04 /**< Unsigned 8-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT12 0x05 /**< Unsigned 12-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT16 0x06 /**< Unsigned 16-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT24 0x07 /**< Unsigned 24-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT32 0x08 /**< Unsigned 32-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT48 0x09 /**< Unsigned 48-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT64 0x0A /**< Unsigned 64-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT128 0x0B /**< Unsigned 128-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT8 0x0C /**< Signed 2-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT12 0x0D /**< Signed 12-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT16 0x0E /**< Signed 16-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT24 0x0F /**< Signed 24-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT32 0x10 /**< Signed 32-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT48 0x11 /**< Signed 48-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT64 0x12 /**< Signed 64-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT128 0x13 /**< Signed 128-bit integer. */
+#define BLE_GATT_CPF_FORMAT_FLOAT32 0x14 /**< IEEE-754 32-bit floating point. */
+#define BLE_GATT_CPF_FORMAT_FLOAT64 0x15 /**< IEEE-754 64-bit floating point. */
+#define BLE_GATT_CPF_FORMAT_SFLOAT 0x16 /**< IEEE-11073 16-bit SFLOAT. */
+#define BLE_GATT_CPF_FORMAT_FLOAT 0x17 /**< IEEE-11073 32-bit FLOAT. */
+#define BLE_GATT_CPF_FORMAT_DUINT16 0x18 /**< IEEE-20601 format. */
+#define BLE_GATT_CPF_FORMAT_UTF8S 0x19 /**< UTF-8 string. */
+#define BLE_GATT_CPF_FORMAT_UTF16S 0x1A /**< UTF-16 string. */
+#define BLE_GATT_CPF_FORMAT_STRUCT 0x1B /**< Opaque Structure. */
+/** @} */
+
+/** @defgroup BLE_GATT_CPF_NAMESPACES GATT Bluetooth Namespaces
+ * @{
+ */
+#define BLE_GATT_CPF_NAMESPACE_BTSIG 0x01
+#define BLE_GATT_CPF_NAMESPACE_DESCRIPTION_UNKNOWN 0x0000
+/** @} */
+
+/** @} */
+
+/**@brief GATT Characteristic Properties. */
+typedef struct
+{
+ /* Standard properties */
+ uint8_t broadcast :1; /**< Broadcasting of value permitted. */
+ uint8_t read :1; /**< Reading value permitted. */
+ uint8_t write_wo_resp :1; /**< Writing value with Write Command permitted. */
+ uint8_t write :1; /**< Writing value with Write Request permitted. */
+ uint8_t notify :1; /**< Notications of value permitted. */
+ uint8_t indicate :1; /**< Indications of value permitted. */
+ uint8_t auth_signed_wr :1; /**< Writing value with Signed Write Command permitted. */
+} ble_gatt_char_props_t;
+
+/**@brief GATT Characteristic Extended Properties. */
+typedef struct
+{
+ /* Extended properties */
+ uint8_t reliable_wr :1; /**< Writing value with Queued Write Request permitted. */
+ uint8_t wr_aux :1; /**< Writing the Characteristic User Description permitted. */
+} ble_gatt_char_ext_props_t;
+
+#endif // BLE_GATT_H__
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/ble_gattc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/ble_gattc.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,395 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_GATTC Generic Attribute Profile (GATT) Client
+ @{
+ @brief Definitions and prototypes for the GATT Client interface.
+ */
+
+#ifndef BLE_GATTC_H__
+#define BLE_GATTC_H__
+
+#include "ble_gatt.h"
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "nrf_svc.h"
+
+
+/**@brief GATTC API SVC numbers. */
+enum BLE_GATTC_SVCS
+{
+ SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER = BLE_GATTC_SVC_BASE, /**< Primary Service Discovery. */
+ SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, /**< Relationship Discovery. */
+ SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, /**< Characteristic Discovery. */
+ SD_BLE_GATTC_DESCRIPTORS_DISCOVER, /**< Characteristic Descriptor Discovery. */
+ SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, /**< Read Characteristic Value by UUID. */
+ SD_BLE_GATTC_READ, /**< Generic read. */
+ SD_BLE_GATTC_CHAR_VALUES_READ, /**< Read multiple Characteristic Values. */
+ SD_BLE_GATTC_WRITE, /**< Generic write. */
+ SD_BLE_GATTC_HV_CONFIRM /**< Handle Value Confirmation. */
+};
+
+/** @addtogroup BLE_GATTC_DEFINES Defines
+ * @{ */
+
+/** @defgroup BLE_ERRORS_GATTC SVC return values specific to GATTC
+ * @{ */
+#define BLE_ERROR_GATTC_PROC_NOT_PERMITTED (NRF_GATTC_ERR_BASE + 0x000)
+/** @} */
+
+/**@brief Last Attribute Handle. */
+#define BLE_GATTC_HANDLE_END 0xFFFF
+
+/** @} */
+
+/**@brief Operation Handle Range. */
+typedef struct
+{
+ uint16_t start_handle; /**< Start Handle. */
+ uint16_t end_handle; /**< End Handle. */
+} ble_gattc_handle_range_t;
+
+
+/**@brief GATT service. */
+typedef struct
+{
+ ble_uuid_t uuid; /**< Service UUID. */
+ ble_gattc_handle_range_t handle_range; /**< Service Handle Range. */
+} ble_gattc_service_t;
+
+
+/**@brief GATT include. */
+typedef struct
+{
+ uint16_t handle; /**< Include Handle. */
+ ble_gattc_service_t included_srvc; /**< Handle of the included service. */
+} ble_gattc_include_t;
+
+
+/**@brief GATT characteristic. */
+typedef struct
+{
+ ble_uuid_t uuid; /**< Characteristic UUID. */
+ ble_gatt_char_props_t char_props; /**< Characteristic Properties. */
+ uint8_t char_ext_props : 1; /**< Extended properties present. */
+ uint16_t handle_decl; /**< Handle of the Characteristic Declaration. */
+ uint16_t handle_value; /**< Handle of the Characteristic Value. */
+} ble_gattc_char_t;
+
+
+/**@brief GATT descriptor. */
+typedef struct
+{
+ uint16_t handle; /**< Descriptor Handle. */
+ ble_uuid_t uuid; /**< Descriptor UUID. */
+} ble_gattc_desc_t;
+
+
+/**@brief Write Parameters. */
+typedef struct
+{
+ uint8_t write_op; /**< Write Operation to be performed, see BLE_GATT_WRITE_OPS. */
+ uint16_t handle; /**< Handle to the attribute to be written. */
+ uint16_t offset; /**< Offset in bytes. */
+ uint16_t len; /**< Length of data in bytes. */
+ uint8_t* p_value; /**< Pointer to the value data. */
+ uint8_t flags; /**< Flags, see @ref BLE_GATT_EXEC_WRITE_FLAGS. */
+} ble_gattc_write_params_t;
+
+
+/**
+ * @brief GATT Client Event IDs.
+ */
+enum BLE_GATTC_EVTS
+{
+ BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP = BLE_GATTC_EVT_BASE, /**< Primary Service Discovery Response event. */
+ BLE_GATTC_EVT_REL_DISC_RSP, /**< Relationship Discovery Response event. */
+ BLE_GATTC_EVT_CHAR_DISC_RSP, /**< Characteristic Discovery Response event. */
+ BLE_GATTC_EVT_DESC_DISC_RSP, /**< Descriptor Discovery Response event. */
+ BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP, /**< Read By UUID Response event. */
+ BLE_GATTC_EVT_READ_RSP, /**< Read Response event. */
+ BLE_GATTC_EVT_CHAR_VALS_READ_RSP, /**< Read multiple Response event. */
+ BLE_GATTC_EVT_WRITE_RSP, /**< Write Response event. */
+ BLE_GATTC_EVT_HVX, /**< Handle Value Notification or Indication event. */
+ BLE_GATTC_EVT_TIMEOUT /**< Timeout event. */
+};
+
+/**@brief Event structure for BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Service count. */
+ ble_gattc_service_t services[1]; /**< Service data, variable length. */
+} ble_gattc_evt_prim_srvc_disc_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_REL_DISC_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Include count. */
+ ble_gattc_include_t includes[1]; /**< Include data, variable length. */
+} ble_gattc_evt_rel_disc_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_CHAR_DISC_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Characteristic count. */
+ ble_gattc_char_t chars[1]; /**< Characteristic data, variable length. */
+} ble_gattc_evt_char_disc_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_DESC_DISC_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Descriptor count. */
+ ble_gattc_desc_t descs[1]; /**< Descriptor data, variable length. */
+} ble_gattc_evt_desc_disc_rsp_t;
+
+/**@brief GATT read by UUID handle value pair. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ uint8_t *p_value; /**< Pointer to value, variable length (length available as value_len in ble_gattc_evt_read_by_uuid_rsp_t).
+ Please note that this pointer is absolute to the memory provided by the user when retrieving the event,
+ so it will effectively point to a location inside the handle_value array. */
+} ble_gattc_handle_value_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Handle-Value Pair Count. */
+ uint16_t value_len; /**< Length of the value in Handle-Value(s) list. */
+ ble_gattc_handle_value_t handle_value[1]; /**< Handle-Value(s) list, variable length. */
+} ble_gattc_evt_char_val_by_uuid_read_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_READ_RSP. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ uint16_t offset; /**< Offset of the attribute data. */
+ uint16_t len; /**< Attribute data length. */
+ uint8_t data[1]; /**< Attribute data, variable length. */
+} ble_gattc_evt_read_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_CHAR_VALS_READ_RSP. */
+typedef struct
+{
+ uint16_t len; /**< Concatenated Attribute values length. */
+ uint8_t values[1]; /**< Attribute values, variable length. */
+} ble_gattc_evt_char_vals_read_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_WRITE_RSP. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ uint8_t write_op; /**< Type of write operation, see @ref BLE_GATT_WRITE_OPS. */
+ uint16_t offset; /**< Data Offset. */
+ uint16_t len; /**< Data length. */
+ uint8_t data[1]; /**< Data, variable length. */
+} ble_gattc_evt_write_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_HVX. */
+typedef struct
+{
+ uint16_t handle; /**< Handle to which the HVx operation applies. */
+ uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */
+ uint16_t len; /**< Attribute data length. */
+ uint8_t data[1]; /**< Attribute data, variable length. */
+} ble_gattc_evt_hvx_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_TIMEOUT. */
+typedef struct
+{
+ uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */
+} ble_gattc_evt_timeout_t;
+
+/**@brief GATTC event type. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which event occured. */
+ uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
+ uint16_t error_handle; /**< In case of error: The handle causing the error. In all other cases BLE_GATT_HANDLE_INVALID. */
+ union
+ {
+ ble_gattc_evt_prim_srvc_disc_rsp_t prim_srvc_disc_rsp; /**< Primary Service Discovery Response Event Parameters. */
+ ble_gattc_evt_rel_disc_rsp_t rel_disc_rsp; /**< Relationship Discovery Response Event Parameters. */
+ ble_gattc_evt_char_disc_rsp_t char_disc_rsp; /**< Characteristic Discovery Response Event Parameters. */
+ ble_gattc_evt_desc_disc_rsp_t desc_disc_rsp; /**< Descriptor Discovery Response Event Parameters. */
+ ble_gattc_evt_char_val_by_uuid_read_rsp_t char_val_by_uuid_read_rsp; /**< Characteristic Value Read by UUID Response Event Parameters. */
+ ble_gattc_evt_read_rsp_t read_rsp; /**< Read Response Event Parameters. */
+ ble_gattc_evt_char_vals_read_rsp_t char_vals_read_rsp; /**< Characteristic Values Read Response Event Parameters. */
+ ble_gattc_evt_write_rsp_t write_rsp; /**< Write Response Event Parameters. */
+ ble_gattc_evt_hvx_t hvx; /**< Handle Value Notification/Indication Event Parameters. */
+ ble_gattc_evt_timeout_t timeout; /**< Timeout Event Parameters. */
+ } params; /**< Event Parameters. @note Only valid if @ref gatt_status == BLE_GATT_STATUS_SUCCESS. */
+} ble_gattc_evt_t;
+
+
+/**@brief Initiate or continue a GATT Primary Service Discovery procedure.
+ *
+ * @details This function initiates a Primary Service discovery, starting from the supplied handle.
+ * If the last service has not been reached, this must be called again with an updated start handle value to continue the search.
+ *
+ * @note If any of the discovered services have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with
+ * type BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] start_handle Handle to start searching from.
+ * @param[in] p_srvc_uuid Pointer to the service UUID to be found. If it is NULL, all primary services will be returned.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Primary Service Discovery procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER, uint32_t, sd_ble_gattc_primary_services_discover(uint16_t conn_handle, uint16_t start_handle, ble_uuid_t const * const p_srvc_uuid));
+
+
+/**@brief Initiate or continue a GATT Relationship Discovery procedure.
+ *
+ * @details This function initiates the Find Included Services sub-procedure. If the last included service has not been reached,
+ * this must be called again with an updated handle range to continue the search.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Relationship Discovery procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, uint32_t, sd_ble_gattc_relationships_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * const p_handle_range));
+
+
+/**@brief Initiate or continue a GATT Characteristic Discovery procedure.
+ *
+ * @details This function initiates a Characteristic discovery procedure. If the last Characteristic has not been reached,
+ * this must be called again with an updated handle range to continue the discovery.
+ *
+ * @note If any of the discovered characteristics have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with
+ * type BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Characteristic Discovery procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, uint32_t, sd_ble_gattc_characteristics_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * const p_handle_range));
+
+
+/**@brief Initiate or continue a GATT Characteristic Descriptor Discovery procedure.
+ *
+ * @details This function initiates the Characteristic Descriptor discovery procedure. If the last Descriptor has not been reached,
+ * this must be called again with an updated handle range to continue the discovery.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_handle_range A pointer to the range of handles of the Characteristic to perform this procedure on.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Descriptor Discovery procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_DESCRIPTORS_DISCOVER, uint32_t, sd_ble_gattc_descriptors_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * const p_handle_range));
+
+
+/**@brief Initiate or continue a GATT Read using Characteristic UUID procedure.
+ *
+ * @details This function initiates the Read using Characteristic UUID procedure. If the last Characteristic has not been reached,
+ * this must be called again with an updated handle range to continue the discovery.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_uuid Pointer to a Characteristic value UUID to read.
+ * @param[in] p_handle_range A pointer to the range of handles to perform this procedure on.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Read using Characteristic UUID procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, uint32_t, sd_ble_gattc_char_value_by_uuid_read(uint16_t conn_handle, ble_uuid_t const * const p_uuid, ble_gattc_handle_range_t const * const p_handle_range));
+
+
+/**@brief Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure.
+ *
+ * @details This function initiates a GATT Read (Long) Characteristic or Descriptor procedure. If the Characteristic or Descriptor
+ * to be read is longer than GATT_MTU - 1, this function must be called multiple times with appropriate offset to read the
+ * complete value.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] handle The handle of the attribute to be read.
+ * @param[in] offset Offset into the attribute value to be read.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Read (Long) procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_READ, uint32_t, sd_ble_gattc_read(uint16_t conn_handle, uint16_t handle, uint16_t offset));
+
+
+/**@brief Initiate a GATT Read Multiple Characteristic Values procedure.
+ *
+ * @details This function initiates a GATT Read Multiple Characteristic Values procedure.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_handles A pointer to the handle(s) of the attribute(s) to be read.
+ * @param[in] handle_count The number of handles in p_handles.
+ *
+ * @return @ref NRF_SUCCESS Successfully started the Read Multiple Characteristic Values procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_CHAR_VALUES_READ, uint32_t, sd_ble_gattc_char_values_read(uint16_t conn_handle, uint16_t const * const p_handles, uint16_t handle_count));
+
+
+/**@brief Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure.
+ *
+ * @details This function can perform all write procedures described in GATT.
+ *
+ * @note It is important to note that a write without response will <b>consume an application buffer</b>, and will therefore
+ * generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted. A write on the other hand will use the
+ * standard client internal buffer and thus will only generate a @ref BLE_GATTC_EVT_WRITE_RSP event as soon as the write response
+ * has been received from the peer. Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_write_params A pointer to a write parameters structure.
+ *
+ * @return @ref NRF_SUCCESS Successfully started the Write procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
+ * @return @ref NRF_ERROR_BUSY Procedure already in progress.
+ * @return @ref BLE_ERROR_NO_TX_BUFFERS There are no available buffers left.
+ */
+SVCALL(SD_BLE_GATTC_WRITE, uint32_t, sd_ble_gattc_write(uint16_t conn_handle, ble_gattc_write_params_t const * const p_write_params));
+
+
+/**@brief Send a Handle Value Confirmation to the GATT Server.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] handle The handle of the attribute in the indication.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued the Handle Value Confirmation for transmission.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_STATE No Indication pending to be confirmed.
+ * @return @ref BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle.
+ * @return @ref BLE_ERROR_NO_TX_BUFFERS There are no available buffers left.
+ */
+SVCALL(SD_BLE_GATTC_HV_CONFIRM, uint32_t, sd_ble_gattc_hv_confirm(uint16_t conn_handle, uint16_t handle));
+
+
+#endif /* BLE_GATTC_H__ */
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/ble_gatts.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/ble_gatts.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,547 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_GATTS Generic Attribute Profile (GATT) Server
+ @{
+ @brief Definitions and prototypes for the GATTS interface.
+ */
+
+#ifndef BLE_GATTS_H__
+#define BLE_GATTS_H__
+
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "ble_l2cap.h"
+#include "ble_gap.h"
+#include "ble_gatt.h"
+#include "nrf_svc.h"
+
+
+/**
+ * @brief GATTS API SVC numbers.
+ */
+enum BLE_GATTS_SVCS
+{
+ SD_BLE_GATTS_SERVICE_ADD = BLE_GATTS_SVC_BASE, /**< Add a service. */
+ SD_BLE_GATTS_INCLUDE_ADD, /**< Add an included service. */
+ SD_BLE_GATTS_CHARACTERISTIC_ADD, /**< Add a characteristic. */
+ SD_BLE_GATTS_DESCRIPTOR_ADD, /**< Add a generic attribute. */
+ SD_BLE_GATTS_VALUE_SET, /**< Set an attribute value. */
+ SD_BLE_GATTS_VALUE_GET, /**< Get an attribute value. */
+ SD_BLE_GATTS_HVX, /**< Handle Value Notification or Indication. */
+ SD_BLE_GATTS_SERVICE_CHANGED, /**< Perform a Service Changed Indication to one or more peers. */
+ SD_BLE_GATTS_RW_AUTHORIZE_REPLY, /**< Reply to an authorization request for a read or write operation on one or more attributes. */
+ SD_BLE_GATTS_SYS_ATTR_SET, /**< Set the persistent system attributes for a connection. */
+ SD_BLE_GATTS_SYS_ATTR_GET, /**< Get updated persistent system attributes after terminating a connection. */
+};
+
+
+/** @addtogroup BLE_GATTS_DEFINES Defines
+ * @{ */
+
+/** @brief Only the default MTU size of 23 is currently supported. */
+#define GATT_RX_MTU 23
+
+/** @defgroup BLE_ERRORS_GATTS SVC return values specific to GATTS
+ * @{ */
+#define BLE_ERROR_GATTS_INVALID_ATTR_TYPE (NRF_GATTS_ERR_BASE + 0x000) /**< Invalid attribute type. */
+#define BLE_ERROR_GATTS_SYS_ATTR_MISSING (NRF_GATTS_ERR_BASE + 0x001) /**< System Attributes missing. */
+/** @} */
+
+/** @defgroup BLE_GATTS_ATTR_LENS_MAX Maximum attribute lengths
+ * @{ */
+#define BLE_GATTS_FIX_ATTR_LEN_MAX (510) /**< Maximum length for fixed length Attribute Values. */
+#define BLE_GATTS_VAR_ATTR_LEN_MAX (512) /**< Maximum length for variable length Attribute Values. */
+/** @} */
+
+/** @defgroup BLE_GATTS_SRVC_TYPES GATT Server Service Types
+ * @{ */
+#define BLE_GATTS_SRVC_TYPE_INVALID 0x00 /**< Invalid Service Type. */
+#define BLE_GATTS_SRVC_TYPE_PRIMARY 0x01 /**< Primary Service. */
+#define BLE_GATTS_SRVC_TYPE_SECONDARY 0x02 /**< Secondary Type. */
+/** @} */
+
+
+/** @defgroup BLE_GATTS_ATTR_TYPES GATT Server Attribute Types
+ * @{ */
+#define BLE_GATTS_ATTR_TYPE_INVALID 0x00 /**< Invalid Attribute Type. */
+#define BLE_GATTS_ATTR_TYPE_PRIM_SRVC_DECL 0x01 /**< Primary Service Declaration. */
+#define BLE_GATTS_ATTR_TYPE_SEC_SRVC_DECL 0x02 /**< Secondary Service Declaration. */
+#define BLE_GATTS_ATTR_TYPE_INC_DECL 0x03 /**< Include Declaration. */
+#define BLE_GATTS_ATTR_TYPE_CHAR_DECL 0x04 /**< Characteristic Declaration. */
+#define BLE_GATTS_ATTR_TYPE_CHAR_VAL 0x05 /**< Characteristic Value. */
+#define BLE_GATTS_ATTR_TYPE_DESC 0x06 /**< Descriptor. */
+#define BLE_GATTS_ATTR_TYPE_OTHER 0x07 /**< Other, non-GATT specific type. */
+/** @} */
+
+
+/** @defgroup BLE_GATTS_OPS GATT Server Operations
+ * @{ */
+#define BLE_GATTS_OP_INVALID 0x00 /**< Invalid Operation. */
+#define BLE_GATTS_OP_WRITE_REQ 0x01 /**< Write Request. */
+#define BLE_GATTS_OP_WRITE_CMD 0x02 /**< Write Command. */
+#define BLE_GATTS_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */
+#define BLE_GATTS_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */
+#define BLE_GATTS_OP_EXEC_WRITE_REQ_CANCEL 0x05 /**< Execute Write Request: Cancel all prepared writes. */
+#define BLE_GATTS_OP_EXEC_WRITE_REQ_NOW 0x06 /**< Execute Write Request: Immediately execute all prepared writes. */
+/** @} */
+
+/** @defgroup BLE_GATTS_VLOCS GATT Value Locations
+ * @{ */
+#define BLE_GATTS_VLOC_INVALID 0x00 /**< Invalid Location. */
+#define BLE_GATTS_VLOC_STACK 0x01 /**< Attribute Value is located in stack memory, no user memory is required. */
+#define BLE_GATTS_VLOC_USER 0x02 /**< Attribute Value is located in user memory. This requires the user to maintain a valid buffer through the lifetime of the attribute, since the stack
+ will read and write directly to the memory using the pointer provided in the APIs. There are no alignment requirements for the buffer. */
+/** @} */
+
+/** @defgroup BLE_GATTS_AUTHORIZE_TYPES GATT Server Authorization Types
+ * @{ */
+#define BLE_GATTS_AUTHORIZE_TYPE_INVALID 0x00 /**< Invalid Type. */
+#define BLE_GATTS_AUTHORIZE_TYPE_READ 0x01 /**< Authorize a Read Operation. */
+#define BLE_GATTS_AUTHORIZE_TYPE_WRITE 0x02 /**< Authorize a Write Request Operation. */
+/** @} */
+
+
+/** @} */
+
+/**@brief Attribute metadata. */
+typedef struct
+{
+ ble_gap_conn_sec_mode_t read_perm; /**< Read permissions. */
+ ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */
+ uint8_t vlen :1; /**< Variable length attribute. */
+ uint8_t vloc :2; /**< Value location, see @ref BLE_GATTS_VLOCS.*/
+ uint8_t rd_auth :1; /**< Read Authorization and value will be requested from the application on every read operation. */
+ uint8_t wr_auth :1; /**< Write Authorization will be requested from the application on every Write Request operation (but not Write Command). */
+} ble_gatts_attr_md_t;
+
+
+/**@brief GATT Attribute. */
+typedef struct
+{
+ ble_uuid_t* p_uuid; /**< Pointer to the attribute UUID. */
+ ble_gatts_attr_md_t* p_attr_md; /**< Pointer to the attribute metadata structure. */
+ uint16_t init_len; /**< Initial attribute value length in bytes. */
+ uint16_t init_offs; /**< Initial attribute value offset in bytes. If different from zero, the first init_offs bytes of the attribute value will be left uninitialized. */
+ uint16_t max_len; /**< Maximum attribute value length in bytes, see @ref BLE_GATTS_ATTR_LENS_MAX for maximum values. */
+ uint8_t* p_value; /**< Pointer to the attribute data. Please note that if the @ref BLE_GATTS_VLOC_USER value location is selected in the attribute metadata, this will have to point to a buffer
+ that remains valid through the lifetime of the attribute. This excludes usage of automatic variables that may go out of scope or any other temporary location.
+ The stack may access that memory directly without the application's knowledge. */
+} ble_gatts_attr_t;
+
+
+/**@brief GATT Attribute Context. */
+typedef struct
+{
+ ble_uuid_t srvc_uuid; /**< Service UUID. */
+ ble_uuid_t char_uuid; /**< Characteristic UUID if applicable (BLE_UUID_TYPE_UNKNOWN if N/A). */
+ ble_uuid_t desc_uuid; /**< Descriptor UUID if applicable (BLE_UUID_TYPE_UNKNOWN if N/A). */
+ uint16_t srvc_handle; /**< Service Handle. */
+ uint16_t value_handle; /**< Characteristic Handle if applicable (BLE_GATT_HANDLE_INVALID if N/A). */
+ uint8_t type; /**< Attribute Type, see @ref BLE_GATTS_ATTR_TYPES. */
+} ble_gatts_attr_context_t;
+
+
+/**@brief GATT Characteristic Presentation Format. */
+typedef struct
+{
+ uint8_t format; /**< Format of the value, see @ref BLE_GATT_CPF_FORMATS. */
+ int8_t exponent; /**< Exponent for integer data types. */
+ uint16_t unit; /**< UUID from Bluetooth Assigned Numbers. */
+ uint8_t name_space; /**< Namespace from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */
+ uint16_t desc; /**< Namespace description from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */
+} ble_gatts_char_pf_t;
+
+
+/**@brief GATT Characteristic metadata. */
+typedef struct
+{
+ ble_gatt_char_props_t char_props; /**< Characteristic Properties. */
+ ble_gatt_char_ext_props_t char_ext_props; /**< Characteristic Extended Properties. */
+ uint8_t* p_char_user_desc; /**< Pointer to a UTF-8, NULL if the descriptor is not required. */
+ uint16_t char_user_desc_max_size; /**< The maximum size in bytes of the user description descriptor. */
+ uint16_t char_user_desc_size; /**< The size of the user description, must be smaller or equal to char_user_desc_max_size. */
+ ble_gatts_char_pf_t* p_char_pf; /**< Pointer to a presentation format structure or NULL if the descriptor is not required. */
+ ble_gatts_attr_md_t* p_user_desc_md; /**< Attribute metadata for the User Description descriptor, or NULL for default values. */
+ ble_gatts_attr_md_t* p_cccd_md; /**< Attribute metadata for the Client Characteristic Configuration Descriptor, or NULL for default values. */
+ ble_gatts_attr_md_t* p_sccd_md; /**< Attribute metadata for the Server Characteristic Configuration Descriptor, or NULL for default values. */
+} ble_gatts_char_md_t;
+
+
+/**@brief GATT Characteristic Definition Handles. */
+typedef struct
+{
+ uint16_t value_handle; /**< Handle to the characteristic value. */
+ uint16_t user_desc_handle; /**< Handle to the User Description descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
+ uint16_t cccd_handle; /**< Handle to the Client Characteristic Configuration Descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
+ uint16_t sccd_handle; /**< Handle to the Server Characteristic Configuration Descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
+} ble_gatts_char_handles_t;
+
+
+/**@brief GATT HVx parameters. */
+typedef struct
+{
+ uint16_t handle; /**< Characteristic Value Handle. */
+ uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */
+ uint16_t offset; /**< Offset within the attribute value. */
+ uint16_t* p_len; /**< Length in bytes to be written, length in bytes written after successful return. */
+ uint8_t* p_data; /**< Actual data content, use NULL to use the current attribute value. */
+} ble_gatts_hvx_params_t;
+
+/**@brief GATT Read Authorization parameters. */
+typedef struct
+{
+ uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
+ uint8_t update : 1; /**< If set, data supplied in p_data will be used in the ATT response. */
+ uint16_t offset; /**< Offset of the attribute value being updated. */
+ uint16_t len; /**< Length in bytes of the value in p_data pointer, see @ref BLE_GATTS_ATTR_LENS_MAX. */
+ uint8_t* p_data; /**< Pointer to new value used to update the attribute value. */
+} ble_gatts_read_authorize_params_t;
+
+/**@brief GATT Write Authorisation parameters. */
+typedef struct
+{
+ uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
+} ble_gatts_write_authorize_params_t;
+
+/**@brief GATT Read or Write Authorize Reply parameters. */
+typedef struct
+{
+ uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */
+ union {
+ ble_gatts_read_authorize_params_t read; /**< Read authorization parameters. */
+ ble_gatts_write_authorize_params_t write; /**< Write authorization parameters. */
+ } params;
+} ble_gatts_rw_authorize_reply_params_t;
+
+
+/**
+ * @brief GATT Server Event IDs.
+ */
+enum BLE_GATTS_EVTS
+{
+ BLE_GATTS_EVT_WRITE = BLE_GATTS_EVT_BASE, /**< Write operation performed. */
+ BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST, /**< Read/Write Authorization request. */
+ BLE_GATTS_EVT_SYS_ATTR_MISSING, /**< A persistent system attribute access is pending, awaiting a sd_ble_gatts_sys_attr_set(). */
+ BLE_GATTS_EVT_HVC, /**< Handle Value Confirmation. */
+ BLE_GATTS_EVT_SC_CONFIRM, /**< Service Changed Confirmation. */
+ BLE_GATTS_EVT_TIMEOUT /**< Timeout. */
+};
+
+
+/**@brief Event structure for BLE_GATTS_EVT_WRITE. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ uint8_t op; /**< Type of write operation, see @ref BLE_GATTS_OPS. */
+ ble_gatts_attr_context_t context; /**< Attribute Context. */
+ uint16_t offset; /**< Offset for the write operation. */
+ uint16_t len; /**< Length of the incoming data. */
+ uint8_t data[1]; /**< Incoming data, variable length. */
+} ble_gatts_evt_write_t;
+
+/**@brief Event structure for authorize read request. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ ble_gatts_attr_context_t context; /**< Attribute Context. */
+ uint16_t offset; /**< Offset for the read operation. */
+} ble_gatts_evt_read_t;
+
+/**@brief Event structure for BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST. */
+typedef struct
+{
+ uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */
+ union {
+ ble_gatts_evt_read_t read; /**< Attribute Read Parameters. */
+ ble_gatts_evt_write_t write; /**< Attribute Write Parameters. */
+ } request;
+} ble_gatts_evt_rw_authorize_request_t;
+
+/**@brief Event structure for BLE_GATTS_EVT_SYS_ATTR_MISSING. */
+typedef struct
+{
+ uint8_t hint;
+} ble_gatts_evt_sys_attr_missing_t;
+
+
+/**@brief Event structure for BLE_GATTS_EVT_HVC. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+} ble_gatts_evt_hvc_t;
+
+/**@brief Event structure for BLE_GATTS_EVT_TIMEOUT. */
+typedef struct
+{
+ uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */
+} ble_gatts_evt_timeout_t;
+
+
+/**@brief GATT Server event callback event structure. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which event occurred. */
+ union
+ {
+ ble_gatts_evt_write_t write; /**< Write Event Parameters. */
+ ble_gatts_evt_rw_authorize_request_t authorize_request; /**< Read or Write Authorize Request Parameters. */
+ ble_gatts_evt_sys_attr_missing_t sys_attr_missing; /**< System attributes missing. */
+ ble_gatts_evt_hvc_t hvc; /**< Handle Value Confirmation Event Parameters. */
+ ble_gatts_evt_timeout_t timeout; /**< Timeout Event. */
+ } params;
+} ble_gatts_evt_t;
+
+
+/**@brief Add a service declaration to the local server ATT table.
+ *
+ * @param[in] type Toggles between primary and secondary services, see @ref BLE_GATTS_SRVC_TYPES.
+ * @param[in] p_uuid Pointer to service UUID.
+ * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored.
+ *
+ * @note Secondary Services are only relevant in the context of the entity that references them, it is therefore forbidden to
+ * add a secondary service declaration that is not referenced by another service later in the ATT table.
+ *
+ * @return @ref NRF_SUCCESS Successfully added a service declaration.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, Vendor Specific UUIDs need to be present in the table.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_GATTS_SERVICE_ADD, uint32_t, sd_ble_gatts_service_add(uint8_t type, ble_uuid_t const*const p_uuid, uint16_t *const p_handle));
+
+
+/**@brief Add an include declaration to the local server ATT table.
+ *
+ * @note It is currently only possible to add an include declaration to the last added service (i.e. only sequential addition is supported at this time).
+ *
+ * @note The included service must already be present in the ATT table prior to this call.
+ *
+ * @param[in] service_handle Handle of the service where the included service is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
+ * @param[in] inc_srvc_handle Handle of the included service.
+ * @param[out] p_include_handle Pointer to a 16-bit word where the assigned handle will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully added an include declaration.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, handle values need to match previously added services.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, self inclusions are not allowed.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
+ */
+SVCALL(SD_BLE_GATTS_INCLUDE_ADD, uint32_t, sd_ble_gatts_include_add(uint16_t service_handle, uint16_t inc_srvc_handle, uint16_t *const p_include_handle));
+
+
+/**@brief Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the local server ATT table.
+ *
+ * @note It is currently only possible to add a characteristic to the last added service (i.e. only sequential addition is supported at this time).
+ *
+ * @note Several restrictions apply to the parameters, such as matching permissions between the user description descriptor and the writeable auxiliaries bits,
+ * readable (no security) and writeable (selectable) CCCDs and SCCDs and valid presentation format values.
+ *
+ * @note If no metadata is provided for the optional descriptors, their permissions will be derived from the characteristic permissions.
+ *
+ * @param[in] service_handle Handle of the service where the characteristic is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
+ * @param[in] p_char_md Characteristic metadata.
+ * @param[in] p_attr_char_value Pointer to the attribute structure corresponding to the characteristic value.
+ * @param[out] p_handles Pointer to the structure where the assigned handles will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully added a characteristic.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, service handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
+ */
+SVCALL(SD_BLE_GATTS_CHARACTERISTIC_ADD, uint32_t, sd_ble_gatts_characteristic_add(uint16_t service_handle, ble_gatts_char_md_t const*const p_char_md, ble_gatts_attr_t const*const p_attr_char_value, ble_gatts_char_handles_t *const p_handles));
+
+
+/**@brief Add a descriptor to the local server ATT table.
+ *
+ * @note It is currently only possible to add a descriptor to the last added characteristic (i.e. only sequential addition is supported at this time).
+ *
+ * @param[in] char_handle Handle of the characteristic where the descriptor is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
+ * @param[in] p_attr Pointer to the attribute structure.
+ * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully added a descriptor.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, characteristic handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, a characteristic context is required.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
+ */
+SVCALL(SD_BLE_GATTS_DESCRIPTOR_ADD, uint32_t, sd_ble_gatts_descriptor_add(uint16_t char_handle, ble_gatts_attr_t const * const p_attr, uint16_t* const p_handle));
+
+/**@brief Set the value of a given attribute.
+ *
+ * @param[in] handle Attribute handle.
+ * @param[in] offset Offset in bytes to write from.
+ * @param[in,out] p_len Length in bytes to be written, length in bytes written after successful return.
+ * @param[in] p_value Pointer to a buffer (at least len bytes long) containing the desired attribute value.
+ *
+ * @return @ref NRF_SUCCESS Successfully set the value of the attribute.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden handle supplied, certain attributes are not modifiable by the application.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
+ */
+SVCALL(SD_BLE_GATTS_VALUE_SET, uint32_t, sd_ble_gatts_value_set(uint16_t handle, uint16_t offset, uint16_t* const p_len, uint8_t const * const p_value));
+
+/**@brief Get the value of a given attribute.
+ *
+ * @param[in] handle Attribute handle.
+ * @param[in] offset Offset in bytes to read from.
+ * @param[in,out] p_len Length in bytes to be read, total length of attribute value (in bytes, starting from offset) after successful return.
+ * @param[in,out] p_data Pointer to a buffer (at least len bytes long) where to store the attribute value. Set to NULL to obtain the complete length of attribute value.
+ *
+ * @note If the attribute value is longer than the size of the supplied buffer,
+ * p_len will return the total attribute value length (excluding offset),
+ * and not the number of bytes actually returned in p_data.
+ * The application may use this information to allocate a suitable buffer size.
+ *
+ * @return @ref NRF_SUCCESS Successfully retrieved the value of the attribute.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
+ */
+SVCALL(SD_BLE_GATTS_VALUE_GET, uint32_t, sd_ble_gatts_value_get(uint16_t handle, uint16_t offset, uint16_t *const p_len, uint8_t* const p_data));
+
+/**@brief Notify or Indicate an attribute value.
+ *
+ * @details This function checks for the relevant Client Characteristic Configuration descriptor value to verify that the relevant operation
+ * (notification or indication) has been enabled by the client. It is also able to update the attribute value before issuing the PDU, so that
+ * the application can atomically perform a value update and a server initiated transaction with a single API call.
+ * If the application chooses to indicate an attribute value, a @ref BLE_GATTS_EVT_HVC will be sent up as soon as the confirmation arrives from
+ * the peer.
+ *
+ * @note The local attribute value may be updated even if an outgoing packet is not sent to the peer due to an error during execution.
+ * When receiveing the error codes @ref NRF_ERROR_INVALID_STATE, @ref NRF_ERROR_BUSY, @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING and
+ * @ref BLE_ERROR_NO_TX_BUFFERS the ATT table has been updated.
+ * The caller can check whether the value has been updated by looking at the contents of *(p_hvx_params->p_len).
+ *
+ * @note It is important to note that a notification will <b>consume an application buffer</b>, and will therefore
+ * generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted. An indication on the other hand will use the
+ * standard server internal buffer and thus will only generate a @ref BLE_GATTS_EVT_HVC event as soon as the confirmation
+ * has been received from the peer. Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_hvx_params Pointer to an HVx parameters structure. If the p_data member contains a non-NULL pointer the attribute value will be updated with
+ * the contents pointed by it before sending the notification or indication.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued a notification or indication for transmission, and optionally updated the attribute value.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied. Only attributes added directly by the application are available to notify and indicate.
+ * @return @ref BLE_ERROR_GATTS_INVALID_ATTR_TYPE Invalid attribute type(s) supplied, only characteristic values may be notified and indicated.
+ * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, notifications or indications must be enabled in the CCCD.
+ * @return @ref NRF_ERROR_BUSY Procedure already in progress.
+ * @return @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value.
+ * @return @ref BLE_ERROR_NO_TX_BUFFERS There are no available buffers to send the data, applies only to notifications.
+ */
+SVCALL(SD_BLE_GATTS_HVX, uint32_t, sd_ble_gatts_hvx(uint16_t conn_handle, ble_gatts_hvx_params_t const*const p_hvx_params));
+
+/**@brief Indicate the Service Changed attribute value.
+ *
+ * @details This call will send a Handle Value Indication to one or more peers connected to inform them that the attribute
+ * table layout has changed. As soon as the peer has confirmed the indication, a @ref BLE_GATTS_EVT_SC_CONFIRM event will
+ * be issued.
+ *
+ * @note Some of the restrictions and limitations that apply to @ref sd_ble_gatts_hvx also apply here.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] start_handle Start of affected attribute handle range.
+ * @param[in] end_handle End of affected attribute handle range.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued the Service Changed indication for transmission.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied, handles must be in the range populated by the application.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, notifications or indications must be enabled in the CCCD.
+ * @return @ref NRF_ERROR_BUSY Procedure already in progress.
+ * @return @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value.
+ */
+SVCALL(SD_BLE_GATTS_SERVICE_CHANGED, uint32_t, sd_ble_gatts_service_changed(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle));
+
+/**@brief Respond to a Read/Write authorization request.
+ *
+ * @note This call should only be used as a response to a @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST event issued to the application.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_rw_authorize_reply_params Pointer to a structure with the attribute provided by the application.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued a response to the peer, and in the case of a write operation, ATT table updated.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_STATE No authorization request pending.
+ * @return @ref NRF_ERROR_INVALID_PARAM Authorization op invalid,
+ * or for Read Authorization reply: requested handles not replied with,
+ * or for Write Authorization reply: handle supplied does not match requested handle.
+ */
+SVCALL(SD_BLE_GATTS_RW_AUTHORIZE_REPLY, uint32_t, sd_ble_gatts_rw_authorize_reply(uint16_t conn_handle, ble_gatts_rw_authorize_reply_params_t const*const p_rw_authorize_reply_params));
+
+
+/**@brief Update persistent system attribute information.
+ *
+ * @details Supply to the stack information about persistent system attributes.
+ * This call is legal in the connected state only, and is usually
+ * made immediately after a connection is established and the bond identified.
+ * usually as a response to a BLE_GATTS_EVT_SYS_ATTR_MISSING.
+ *
+ * p_sysattrs may point directly to the application's stored copy of the struct.
+ * If the pointer is NULL, the system attribute info is initialized, assuming that
+ * the application does not have any previously saved data for this bond.
+ *
+ * @note The state of persistent system attributes is reset upon connection and then remembered for its duration.
+ *
+ * @note If this call returns with an error code different from @ref NRF_SUCCESS, the storage of persistent system attributes may have been completed only partially.
+ * This means that the state of the attribute table is undefined, and the application should either provide a new set of attributes using this same call or
+ * reset the SoftDevice to return to a known state.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_sys_attr_data Pointer to a saved copy of system attributes supplied to the stack, or NULL.
+ * @param[in] len Size of data pointed by p_sys_attr_data, in octets.
+ *
+ * @return @ref NRF_SUCCESS Successfully set the system attribute information.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_DATA Invalid data supplied, the data should be exactly the same as retrieved with @ref sd_ble_gatts_sys_attr_get.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_GATTS_SYS_ATTR_SET, uint32_t, sd_ble_gatts_sys_attr_set(uint16_t conn_handle, uint8_t const*const p_sys_attr_data, uint16_t len));
+
+
+/**@brief Retrieve persistent system attribute information from the stack.
+ *
+ * @details This call is used to retrieve information about values to be stored perisistently by the application
+ * after a connection has been terminated. When a new connection is made to the same bond, the values
+ * should be restored using @ref sd_ble_gatts_sys_attr_set.
+ * The data should be read before any new advertising is started, or any new connection established. The connection handle for
+ * the previous now defunct connection will remain valid until a new one is created to allow this API call to refer to it.
+ *
+ * @param[in] conn_handle Connection handle of the recently terminated connection.
+ * @param[in] p_sys_attr_data Pointer to a buffer where updated information about system attributes will be filled in. NULL can be provided to
+ * obtain the length of the data
+ * @param[in,out] p_len Size of application buffer if p_sys_attr_data is not NULL. Unconditially updated to actual length of system attribute data.
+ *
+ * @return @ref NRF_SUCCESS Successfully retrieved the system attribute information.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_DATA_SIZE The system attribute information did not fit into the provided buffer.
+ */
+SVCALL(SD_BLE_GATTS_SYS_ATTR_GET, uint32_t, sd_ble_gatts_sys_attr_get(uint16_t conn_handle, uint8_t * const p_sys_attr_data, uint16_t* const p_len));
+
+
+#endif // BLE_GATTS_H__
+
+/**
+ @}
+*/
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/ble_hci.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/ble_hci.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,96 @@
+/*
+ Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+
+ The information contained herein is confidential property of Nordic Semiconductor. The use,
+ copying, transfer or disclosure of such information is prohibited except by express written
+ agreement with Nordic Semiconductor.
+ */
+/**
+ @addtogroup BLE_COMMON
+ @{
+*/
+
+
+#ifndef BLE_HCI_H__
+#define BLE_HCI_H__
+
+/** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes
+ * @{ */
+
+#define BLE_HCI_STATUS_CODE_SUCCESS 0x00
+#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND 0x01
+#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER 0x02
+/*0x03 Hardware Failure
+0x04 Page Timeout
+*/
+#define BLE_HCI_AUTHENTICATION_FAILURE 0x05
+#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING 0x06
+#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED 0x07
+#define BLE_HCI_CONNECTION_TIMEOUT 0x08
+/*0x09 Connection Limit Exceeded
+0x0A Synchronous Connection Limit To A Device Exceeded
+0x0B ACL Connection Already Exists*/
+#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED 0x0C
+/*0x0D Connection Rejected due to Limited Resources
+0x0E Connection Rejected Due To Security Reasons
+0x0F Connection Rejected due to Unacceptable BD_ADDR
+0x10 Connection Accept Timeout Exceeded
+0x11 Unsupported Feature or Parameter Value*/
+#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12
+#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION 0x13
+#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14
+#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF 0x15
+#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION 0x16
+/*
+0x17 Repeated Attempts
+0x18 Pairing Not Allowed
+0x19 Unknown LMP PDU
+*/
+#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A
+/*
+0x1B SCO Offset Rejected
+0x1C SCO Interval Rejected
+0x1D SCO Air Mode Rejected*/
+#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS 0x1E
+#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR 0x1F
+/*0x20 Unsupported LMP Parameter Value
+0x21 Role Change Not Allowed
+*/
+#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT 0x22
+/*0x23 LMP Error Transaction Collision*/
+#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED 0x24
+/*0x25 Encryption Mode Not Acceptable
+0x26 Link Key Can Not be Changed
+0x27 Requested QoS Not Supported
+*/
+#define BLE_HCI_INSTANT_PASSED 0x28
+#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED 0x29
+#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION 0x2A
+/*
+0x2B Reserved
+0x2C QoS Unacceptable Parameter
+0x2D QoS Rejected
+0x2E Channel Classification Not Supported
+0x2F Insufficient Security
+0x30 Parameter Out Of Mandatory Range
+0x31 Reserved
+0x32 Role Switch Pending
+0x33 Reserved
+0x34 Reserved Slot Violation
+0x35 Role Switch Failed
+0x36 Extended Inquiry Response Too Large
+0x37 Secure Simple Pairing Not Supported By Host.
+0x38 Host Busy - Pairing
+0x39 Connection Rejected due to No Suitable Channel Found*/
+#define BLE_HCI_CONTROLLER_BUSY 0x3A
+#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE 0x3B
+#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT 0x3C
+#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE 0x3D
+#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED 0x3E
+
+/** @} */
+
+
+#endif // BLE_HCI_H__
+
+/** @} */
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/ble_l2cap.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/ble_l2cap.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,135 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_L2CAP Logical Link Control and Adaptation Protocol (L2CAP)
+ @{
+ @brief Definitions and prototypes for the L2CAP interface.
+ */
+
+#ifndef BLE_L2CAP_H__
+#define BLE_L2CAP_H__
+
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "ble_err.h"
+#include "nrf_svc.h"
+
+/**@brief L2CAP API SVC numbers. */
+enum BLE_L2CAP_SVCS
+{
+ SD_BLE_L2CAP_CID_REGISTER = BLE_L2CAP_SVC_BASE, /**< Register a CID. */
+ SD_BLE_L2CAP_CID_UNREGISTER, /**< Unregister a CID. */
+ SD_BLE_L2CAP_TX /**< Transmit a packet. */
+};
+
+/**@addtogroup BLE_L2CAP_DEFINES Defines
+ * @{ */
+
+/**@defgroup BLE_ERRORS_L2CAP SVC return values specific to L2CAP
+ * @{ */
+#define BLE_ERROR_L2CAP_CID_IN_USE (NRF_L2CAP_ERR_BASE + 0x000) /**< CID already in use. */
+/** @} */
+
+/**@brief Default L2CAP MTU. */
+#define BLE_L2CAP_MTU_DEF (23)
+
+/**@brief Invalid Channel Identifier. */
+#define BLE_L2CAP_CID_INVALID (0x0000)
+
+/**@brief Dynamic Channel Identifier base. */
+#define BLE_L2CAP_CID_DYN_BASE (0x0040)
+
+/**@brief Maximum amount of dynamic CIDs. */
+#define BLE_L2CAP_CID_DYN_MAX (8)
+
+/** @} */
+
+/**@brief Packet header format for L2CAP transmission. */
+typedef struct
+{
+ uint16_t len; /**< Length of valid info in data member. */
+ uint16_t cid; /**< Channel ID on which packet is transmitted. */
+} ble_l2cap_header_t;
+
+/**@brief L2CAP Event IDs. */
+enum BLE_L2CAP_EVTS
+{
+ BLE_L2CAP_EVT_RX = BLE_L2CAP_EVT_BASE /**< L2CAP packet received. */
+};
+
+
+/**@brief L2CAP Received packet event report. */
+typedef struct
+{
+ ble_l2cap_header_t header; /** L2CAP packet header. */
+ uint8_t data[1]; /**< Packet data, variable length. */
+} ble_l2cap_evt_rx_t;
+
+
+/**@brief L2CAP event callback event structure. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which event occured. */
+ union
+ {
+ ble_l2cap_evt_rx_t rx; /**< RX Event parameters. */
+ } params;
+} ble_l2cap_evt_t;
+
+
+/**@brief Register a CID with L2CAP.
+ *
+ * @details This registers a higher protocol layer with the L2CAP multiplexer, and is requried prior to all operations on the CID.
+ *
+ * @param[in] cid L2CAP CID.
+ *
+ * @return @ref NRF_SUCCESS Successfully registered a CID with the L2CAP layer.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, CID must be above @ref BLE_L2CAP_CID_DYN_BASE.
+ * @return @ref BLE_ERROR_L2CAP_CID_IN_USE L2CAP CID already in use.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_L2CAP_CID_REGISTER, uint32_t, sd_ble_l2cap_cid_register(uint16_t cid));
+
+/**@brief Unregister a CID with L2CAP.
+ *
+ * @details This unregisters a previously registerd higher protocol layer with the L2CAP multiplexer.
+ *
+ * @param[in] cid L2CAP CID.
+ *
+ * @return @ref NRF_SUCCESS Successfully unregistered the CID.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_NOT_FOUND CID not previously registered.
+ */
+SVCALL(SD_BLE_L2CAP_CID_UNREGISTER, uint32_t, sd_ble_l2cap_cid_unregister(uint16_t cid));
+
+/**@brief Transmit an L2CAP packet.
+ *
+ * @note It is important to note that a call to this function will <b>consume an application buffer</b>, and will therefore
+ * generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted.
+ * Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details.
+ *
+ * @param[in] conn_handle Connection Handle.
+ * @param[in] p_header Pointer to a packet header containing length and CID.
+ * @param[in] p_data Pointer to the data to be transmitted.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued an L2CAP packet for transmission.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, CIDs must be registered beforehand with @ref sd_ble_l2cap_cid_register.
+ * @return @ref NRF_ERROR_NOT_FOUND CID not found.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @return @ref BLE_ERROR_NO_TX_BUFFERS Not enough application buffers available.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, see @ref BLE_L2CAP_MTU_DEF.
+ */
+SVCALL(SD_BLE_L2CAP_TX, uint32_t, sd_ble_l2cap_tx(uint16_t conn_handle, ble_l2cap_header_t const * const p_header, uint8_t const * const p_data));
+
+
+#endif // BLE_L2CAP_H__
+
+/**
+ @}
+*/
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/ble_ranges.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/ble_ranges.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,72 @@
+/*
+ Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+
+ The information contained herein is confidential property of Nordic Semiconductor. The use,
+ copying, transfer or disclosure of such information is prohibited except by express written
+ agreement with Nordic Semiconductor.
+ */
+/**
+ @addtogroup BLE_COMMON
+ @{
+ @defgroup ble_ranges Module specific SVC and event number subranges
+ @{
+
+ @brief Definition of SVC and event number subranges for each API module.
+
+ @note
+ SVCs and event numbers are split into subranges for each API module.
+ Each module receives its entire allocated range of SVC calls, whether implemented or not,
+ but return BLE_ERROR_NOT_SUPPORTED for unimplemented or undefined calls in its range.
+
+ Note that the symbols BLE_<module>_SVC_LAST is the end of the allocated SVC range,
+ rather than the last SVC function call actually defined and implemented.
+
+ Specific SVC and event values are defined in each module's ble_<module>.h file,
+ which defines names of each individual SVC code based on the range start value.
+*/
+
+#ifndef BLE_RANGES_H__
+#define BLE_RANGES_H__
+
+#define BLE_SVC_BASE 0x60
+#define BLE_SVC_LAST 0x6B /* Total: 12. */
+
+#define BLE_RESERVED_SVC_BASE 0x6C
+#define BLE_RESERVED_SVC_LAST 0x6F /* Total: 4. */
+
+#define BLE_GAP_SVC_BASE 0x70
+#define BLE_GAP_SVC_LAST 0x8F /* Total: 32. */
+
+#define BLE_GATTC_SVC_BASE 0x90
+#define BLE_GATTC_SVC_LAST 0x9F /* Total: 16. */
+
+#define BLE_GATTS_SVC_BASE 0xA0
+#define BLE_GATTS_SVC_LAST 0xAF /* Total: 16. */
+
+#define BLE_L2CAP_SVC_BASE 0xB0
+#define BLE_L2CAP_SVC_LAST 0xBF /* Total: 16. */
+
+
+#define BLE_EVT_INVALID 0x00
+
+#define BLE_EVT_BASE 0x01
+#define BLE_EVT_LAST 0x0F /* Total: 15. */
+
+#define BLE_GAP_EVT_BASE 0x10
+#define BLE_GAP_EVT_LAST 0x2F /* Total: 32. */
+
+#define BLE_GATTC_EVT_BASE 0x30
+#define BLE_GATTC_EVT_LAST 0x4F /* Total: 32. */
+
+#define BLE_GATTS_EVT_BASE 0x50
+#define BLE_GATTS_EVT_LAST 0x6F /* Total: 32. */
+
+#define BLE_L2CAP_EVT_BASE 0x70
+#define BLE_L2CAP_EVT_LAST 0x8F /* Total: 32. */
+
+#endif /* BLE_RANGES_H__ */
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/ble_types.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/ble_types.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,157 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_COMMON
+ @{
+ @defgroup ble_types Common types and macro definitions
+ @{
+
+ @brief Common types and macro definitions for the S110 SoftDevice.
+ */
+
+#ifndef BLE_TYPES_H__
+#define BLE_TYPES_H__
+
+#include <stdint.h>
+
+/** @addtogroup BLE_COMMON_DEFINES Defines
+ * @{ */
+
+/** @defgroup BLE_CONN_HANDLES BLE Connection Handles
+ * @{ */
+#define BLE_CONN_HANDLE_INVALID 0xFFFF /**< Invalid Connection Handle. */
+#define BLE_CONN_HANDLE_ALL 0xFFFE /**< Applies to all Connection Handles. */
+/** @} */
+
+
+/** @defgroup BLE_UUID_VALUES Assigned Values for BLE UUIDs
+ * @{ */
+/* Generic UUIDs, applicable to all services */
+#define BLE_UUID_UNKNOWN 0x0000 /**< Reserved UUID. */
+#define BLE_UUID_SERVICE_PRIMARY 0x2800 /**< Primary Service. */
+#define BLE_UUID_SERVICE_SECONDARY 0x2801 /**< Secondary Service. */
+#define BLE_UUID_SERVICE_INCLUDE 0x2802 /**< Include. */
+#define BLE_UUID_CHARACTERISTIC 0x2803 /**< Characteristic. */
+#define BLE_UUID_DESCRIPTOR_CHAR_EXT_PROP 0x2900 /**< Characteristic Extended Properties Descriptor. */
+#define BLE_UUID_DESCRIPTOR_CHAR_USER_DESC 0x2901 /**< Characteristic User Description Descriptor. */
+#define BLE_UUID_DESCRIPTOR_CLIENT_CHAR_CONFIG 0x2902 /**< Client Characteristic Configuration Descriptor. */
+#define BLE_UUID_DESCRIPTOR_SERVER_CHAR_CONFIG 0x2903 /**< Server Characteristic Configuration Descriptor. */
+#define BLE_UUID_DESCRIPTOR_CHAR_PRESENTATION_FORMAT 0x2904 /**< Characteristic Presentation Format Descriptor. */
+#define BLE_UUID_DESCRIPTOR_CHAR_AGGREGATE_FORMAT 0x2905 /**< Characteristic Aggregate Format Descriptor. */
+/* GATT specific UUIDs */
+#define BLE_UUID_GATT 0x1801 /**< Generic Attribute Profile. */
+#define BLE_UUID_GATT_CHARACTERISTIC_SERVICE_CHANGED 0x2A05 /**< Service Changed Characteristic. */
+/* GAP specific UUIDs */
+#define BLE_UUID_GAP 0x1800 /**< Generic Access Profile. */
+#define BLE_UUID_GAP_CHARACTERISTIC_DEVICE_NAME 0x2A00 /**< Device Name Characteristic. */
+#define BLE_UUID_GAP_CHARACTERISTIC_APPEARANCE 0x2A01 /**< Appearance Characteristic. */
+#define BLE_UUID_GAP_CHARACTERISTIC_PPF 0x2A02 /**< Peripheral Privacy Flag Characteristic. */
+#define BLE_UUID_GAP_CHARACTERISTIC_RECONN_ADDR 0x2A03 /**< Reconnection Address Characteristic. */
+#define BLE_UUID_GAP_CHARACTERISTIC_PPCP 0x2A04 /**< Peripheral Preferred Connection Parameters Characteristic. */
+/** @} */
+
+
+/** @defgroup BLE_UUID_TYPES Types of UUID
+ * @{ */
+#define BLE_UUID_TYPE_UNKNOWN 0x00 /**< Invalid UUID type. */
+#define BLE_UUID_TYPE_BLE 0x01 /**< Bluetooth SIG UUID (16-bit). */
+#define BLE_UUID_TYPE_VENDOR_BEGIN 0x02 /**< Vendor UUID types start at this index (128-bit). */
+/** @} */
+
+
+/** @defgroup BLE_APPEARANCES Bluetooth Appearance values
+ * @note Retrieved from http://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.gap.appearance.xml
+ * @{ */
+#define BLE_APPEARANCE_UNKNOWN 0 /**< Unknown. */
+#define BLE_APPEARANCE_GENERIC_PHONE 64 /**< Generic Phone. */
+#define BLE_APPEARANCE_GENERIC_COMPUTER 128 /**< Generic Computer. */
+#define BLE_APPEARANCE_GENERIC_WATCH 192 /**< Generic Watch. */
+#define BLE_APPEARANCE_WATCH_SPORTS_WATCH 193 /**< Watch: Sports Watch. */
+#define BLE_APPEARANCE_GENERIC_CLOCK 256 /**< Generic Clock. */
+#define BLE_APPEARANCE_GENERIC_DISPLAY 320 /**< Generic Display. */
+#define BLE_APPEARANCE_GENERIC_REMOTE_CONTROL 384 /**< Generic Remote Control. */
+#define BLE_APPEARANCE_GENERIC_EYE_GLASSES 448 /**< Generic Eye-glasses. */
+#define BLE_APPEARANCE_GENERIC_TAG 512 /**< Generic Tag. */
+#define BLE_APPEARANCE_GENERIC_KEYRING 576 /**< Generic Keyring. */
+#define BLE_APPEARANCE_GENERIC_MEDIA_PLAYER 640 /**< Generic Media Player. */
+#define BLE_APPEARANCE_GENERIC_BARCODE_SCANNER 704 /**< Generic Barcode Scanner. */
+#define BLE_APPEARANCE_GENERIC_THERMOMETER 768 /**< Generic Thermometer. */
+#define BLE_APPEARANCE_THERMOMETER_EAR 769 /**< Thermometer: Ear. */
+#define BLE_APPEARANCE_GENERIC_HEART_RATE_SENSOR 832 /**< Generic Heart rate Sensor. */
+#define BLE_APPEARANCE_HEART_RATE_SENSOR_HEART_RATE_BELT 833 /**< Heart Rate Sensor: Heart Rate Belt. */
+#define BLE_APPEARANCE_GENERIC_BLOOD_PRESSURE 896 /**< Generic Blood Pressure. */
+#define BLE_APPEARANCE_BLOOD_PRESSURE_ARM 897 /**< Blood Pressure: Arm. */
+#define BLE_APPEARANCE_BLOOD_PRESSURE_WRIST 898 /**< Blood Pressure: Wrist. */
+#define BLE_APPEARANCE_GENERIC_HID 960 /**< Human Interface Device (HID). */
+#define BLE_APPEARANCE_HID_KEYBOARD 961 /**< Keyboard (HID Subtype). */
+#define BLE_APPEARANCE_HID_MOUSE 962 /**< Mouse (HID Subtype). */
+#define BLE_APPEARANCE_HID_JOYSTICK 963 /**< Joystiq (HID Subtype). */
+#define BLE_APPEARANCE_HID_GAMEPAD 964 /**< Gamepad (HID Subtype). */
+#define BLE_APPEARANCE_HID_DIGITIZERSUBTYPE 965 /**< Digitizer Tablet (HID Subtype). */
+#define BLE_APPEARANCE_HID_CARD_READER 966 /**< Card Reader (HID Subtype). */
+#define BLE_APPEARANCE_HID_DIGITAL_PEN 967 /**< Digital Pen (HID Subtype). */
+#define BLE_APPEARANCE_HID_BARCODE 968 /**< Barcode Scanner (HID Subtype). */
+#define BLE_APPEARANCE_GENERIC_GLUCOSE_METER 1024 /**< Generic Glucose Meter. */
+#define BLE_APPEARANCE_GENERIC_RUNNING_WALKING_SENSOR 1088 /**< Generic Running Walking Sensor. */
+#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_IN_SHOE 1089 /**< Running Walking Sensor: In-Shoe. */
+#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_SHOE 1090 /**< Running Walking Sensor: On-Shoe. */
+#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_HIP 1091 /**< Running Walking Sensor: On-Hip. */
+#define BLE_APPEARANCE_GENERIC_CYCLING 1152 /**< Generic Cycling. */
+#define BLE_APPEARANCE_CYCLING_CYCLING_COMPUTER 1153 /**< Cycling: Cycling Computer. */
+#define BLE_APPEARANCE_CYCLING_SPEED_SENSOR 1154 /**< Cycling: Speed Sensor. */
+#define BLE_APPEARANCE_CYCLING_CADENCE_SENSOR 1155 /**< Cycling: Cadence Sensor. */
+#define BLE_APPEARANCE_CYCLING_POWER_SENSOR 1156 /**< Cycling: Power Sensor. */
+#define BLE_APPEARANCE_CYCLING_SPEED_CADENCE_SENSOR 1157 /**< Cycling: Speed and Cadence Sensor. */
+/** @} */
+
+/** @brief Set .type and .uuid fields of ble_uuid_struct to specified uuid value. */
+#define BLE_UUID_BLE_ASSIGN(instance, value) do {\
+ instance.type = BLE_UUID_TYPE_BLE; \
+ instance.uuid = value;} while(0)
+
+/** @brief Copy type and uuid members from src to dst ble_uuid_t pointer. Both pointers must be valid/non-null. */
+#define BLE_UUID_COPY_PTR(dst, src) do {\
+ (dst)->type = (src)->type; \
+ (dst)->uuid = (src)->uuid;} while(0)
+
+/** @brief Copy type and uuid members from src to dst ble_uuid_t struct. */
+#define BLE_UUID_COPY_INST(dst, src) do {\
+ (dst).type = (src).type; \
+ (dst).uuid = (src).uuid;} while(0)
+
+/** @brief Compare for equality both type and uuid members of two (valid, non-null) ble_uuid_t pointers. */
+#define BLE_UUID_EQ(p_uuid1, p_uuid2) \
+ (((p_uuid1)->type == (p_uuid2)->type) && ((p_uuid1)->uuid == (p_uuid2)->uuid))
+
+/** @brief Compare for difference both type and uuid members of two (valid, non-null) ble_uuid_t pointers. */
+#define BLE_UUID_NEQ(p_uuid1, p_uuid2) \
+ (((p_uuid1)->type != (p_uuid2)->type) || ((p_uuid1)->uuid != (p_uuid2)->uuid))
+
+/** @} */
+
+/** @brief 128 bit UUID values. */
+typedef struct
+{
+ unsigned char uuid128[16];
+} ble_uuid128_t;
+
+/** @brief Bluetooth Low Energy UUID type, encapsulates both 16-bit and 128-bit UUIDs. */
+typedef struct
+{
+ uint16_t uuid; /**< 16-bit UUID value or octets 12-13 of 128-bit UUID. */
+ uint8_t type; /**< UUID type, see @ref BLE_UUID_TYPES. If type is BLE_UUID_TYPE_UNKNOWN, the value of uuid is undefined. */
+} ble_uuid_t;
+
+
+
+#endif /* BLE_TYPES_H__ */
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/cmsis.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed/TARGET_NRF51822/cmsis.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,13 @@ +/* mbed Microcontroller Library - CMSIS + * Copyright (C) 2009-2011 ARM Limited. All rights reserved. + * + * A generic CMSIS include header, pulling in LPC407x_8x specifics + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "nrf51822.h" +#include "cmsis_nvic.h" + +#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/cmsis_nvic.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/cmsis_nvic.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,28 @@
+/* mbed Microcontroller Library - cmsis_nvic
+ * Copyright (c) 2009-2011 ARM Limited. All rights reserved.
+ *
+ * CMSIS-style functionality to support dynamic vectors
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+#define NVIC_NUM_VECTORS (16 + 32) // CORE + MCU Peripherals
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "nrf51822.h"
+#include "cmsis.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/compiler_abstraction.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/compiler_abstraction.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,49 @@
+/* Copyright (c) 2009 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic
+ * Semiconductor ASA.Terms and conditions of usage are described in detail
+ * in NORDIC SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+#ifndef _COMPILER_ABSTRACTION_H
+#define _COMPILER_ABSTRACTION_H
+
+/*lint ++flb "Enter library region" */
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __current_sp() __get_SP()
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+static __INLINE unsigned int __current_sp(void)
+ {
+ register unsigned sp asm("sp");
+ return sp;
+ }
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/*lint --flb "Leave library region" */
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/core_cm0.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/core_cm0.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/core_cm0plus.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/core_cm0plus.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/core_cm3.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/core_cm3.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/core_cm4.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/core_cm4.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/core_cm4_simd.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/core_cm4_simd.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/core_cmFunc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/core_cmFunc.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/core_cmInstr.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/core_cmInstr.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/device.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed/TARGET_NRF51822/device.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,55 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 0 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 0 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 0 + +#include "objects.h" + +#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/gpio_object.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/gpio_object.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,48 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_set;
+ __IO uint32_t *reg_clr;
+ __I uint32_t *reg_in;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value) {
+ if (value)
+ *obj->reg_set = obj->mask;
+ else
+ *obj->reg_clr = obj->mask;
+}
+
+static inline int gpio_read(gpio_t *obj) {
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/nordic_global.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed/TARGET_NRF51822/nordic_global.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,17 @@ +#ifndef _NORDIC_GLOBAL_H_ +#define _NORDIC_GLOBAL_H_ + +/* There are no global defines in mbed, so we need to define */ +/* mandatory conditional compilation flags here */ +//#define NRF51 +#ifndef DEBUG_NRF_USER +#define DEBUG_NRF_USER +#endif +#ifndef BLE_STACK_SUPPORT_REQD +#define BLE_STACK_SUPPORT_REQD +#endif +#ifndef BOARD_PCA10001 +#define BOARD_PCA10001 +#endif + +#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/nrf51.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/nrf51.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,1216 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+
+
+/** @addtogroup Nordic Semiconductor
+ * @{
+ */
+
+/** @addtogroup nRF51
+ * @{
+ */
+
+#ifndef NRF51_H
+#define NRF51_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* ------------------------- Interrupt Number Definition ------------------------ */
+
+typedef enum {
+/* ------------------- Cortex-M0 Processor Exceptions Numbers ------------------- */
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
+ NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
+ SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
+ DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
+ PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
+ SysTick_IRQn = -1, /*!< 15 System Tick Timer */
+/* ---------------------- nRF51 Specific Interrupt Numbers ---------------------- */
+ POWER_CLOCK_IRQn = 0, /*!< 0 POWER_CLOCK */
+ RADIO_IRQn = 1, /*!< 1 RADIO */
+ UART0_IRQn = 2, /*!< 2 UART0 */
+ SPI0_TWI0_IRQn = 3, /*!< 3 SPI0_TWI0 */
+ SPI1_TWI1_IRQn = 4, /*!< 4 SPI1_TWI1 */
+ GPIOTE_IRQn = 6, /*!< 6 GPIOTE */
+ ADC_IRQn = 7, /*!< 7 ADC */
+ TIMER0_IRQn = 8, /*!< 8 TIMER0 */
+ TIMER1_IRQn = 9, /*!< 9 TIMER1 */
+ TIMER2_IRQn = 10, /*!< 10 TIMER2 */
+ RTC0_IRQn = 11, /*!< 11 RTC0 */
+ TEMP_IRQn = 12, /*!< 12 TEMP */
+ RNG_IRQn = 13, /*!< 13 RNG */
+ ECB_IRQn = 14, /*!< 14 ECB */
+ CCM_AAR_IRQn = 15, /*!< 15 CCM_AAR */
+ WDT_IRQn = 16, /*!< 16 WDT */
+ RTC1_IRQn = 17, /*!< 17 RTC1 */
+ QDEC_IRQn = 18, /*!< 18 QDEC */
+ LPCOMP_COMP_IRQn = 19, /*!< 19 LPCOMP_COMP */
+ SWI0_IRQn = 20, /*!< 20 SWI0 */
+ SWI1_IRQn = 21, /*!< 21 SWI1 */
+ SWI2_IRQn = 22, /*!< 22 SWI2 */
+ SWI3_IRQn = 23, /*!< 23 SWI3 */
+ SWI4_IRQn = 24, /*!< 24 SWI4 */
+ SWI5_IRQn = 25 /*!< 25 SWI5 */
+} IRQn_Type;
+
+
+/** @addtogroup Configuration_of_CMSIS
+ * @{
+ */
+
+
+/* ================================================================================ */
+/* ================ Processor and Core Peripheral Section ================ */
+/* ================================================================================ */
+
+/* ----------------Configuration of the cm0 Processor and Core Peripherals---------------- */
+#define __CM0_REV 0x0301 /*!< Cortex-M0 Core Revision */
+#define __MPU_PRESENT 0 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+/** @} */ /* End of group Configuration_of_CMSIS */
+
+#include <core_cm0.h> /*!< Cortex-M0 processor and core peripherals */
+#include "system_nrf51822.h" /*!< nRF51 System */
+
+
+/* ================================================================================ */
+/* ================ Device Specific Peripheral Section ================ */
+/* ================================================================================ */
+
+
+/** @addtogroup Device_Peripheral_Registers
+ * @{
+ */
+
+
+/* ------------------- Start of section using anonymous unions ------------------ */
+#if defined(__CC_ARM)
+ #pragma push
+ #pragma anon_unions
+#elif defined(__ICCARM__)
+ #pragma language=extended
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+/* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning 586
+#else
+ #warning Not supported compiler type
+#endif
+
+
+typedef struct {
+ __IO uint32_t CPU0; /*!< Configurable priority configuration register for CPU0. */
+ __IO uint32_t SPIS1; /*!< Configurable priority configuration register for SPIS1. */
+ __IO uint32_t RADIO; /*!< Configurable priority configuration register for RADIO. */
+ __IO uint32_t ECB; /*!< Configurable priority configuration register for ECB. */
+ __IO uint32_t CCM; /*!< Configurable priority configuration register for CCM. */
+ __IO uint32_t AAR; /*!< Configurable priority configuration register for AAR. */
+} AMLI_RAMPRI_Type;
+
+typedef struct {
+ __O uint32_t EN; /*!< Enable channel group. */
+ __O uint32_t DIS; /*!< Disable channel group. */
+} PPI_TASKS_CHG_Type;
+
+typedef struct {
+ __IO uint32_t EEP; /*!< Channel event end-point. */
+ __IO uint32_t TEP; /*!< Channel task end-point. */
+} PPI_CH_Type;
+
+
+/* ================================================================================ */
+/* ================ POWER ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Power Control. (POWER)
+ */
+
+typedef struct { /*!< POWER Structure */
+ __I uint32_t RESERVED0[30];
+ __O uint32_t TASKS_CONSTLAT; /*!< Enable constant latency mode. */
+ __O uint32_t TASKS_LOWPWR; /*!< Enable low power mode (variable latency). */
+ __I uint32_t RESERVED1[34];
+ __IO uint32_t EVENTS_POFWARN; /*!< Power failure warning. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __IO uint32_t RESETREAS; /*!< Reset reason. */
+ __I uint32_t RESERVED4[63];
+ __O uint32_t SYSTEMOFF; /*!< System off register. */
+ __I uint32_t RESERVED5[3];
+ __IO uint32_t POFCON; /*!< Power failure configuration. */
+ __I uint32_t RESERVED6[2];
+ __IO uint32_t GPREGRET; /*!< General purpose retention register. This register is a retained
+ register. */
+ __I uint32_t RESERVED7;
+ __IO uint32_t RAMON; /*!< Ram on/off. */
+ __I uint32_t RESERVED8[7];
+ __IO uint32_t RESET; /*!< Pin reset functionality configuration register. This register
+ is a retained register. */
+ __I uint32_t RESERVED9[12];
+ __IO uint32_t DCDCEN; /*!< DCDC converter enable configuration register. */
+} NRF_POWER_Type;
+
+
+/* ================================================================================ */
+/* ================ CLOCK ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Clock control. (CLOCK)
+ */
+
+typedef struct { /*!< CLOCK Structure */
+ __O uint32_t TASKS_HFCLKSTART; /*!< Start HFCLK clock source. */
+ __O uint32_t TASKS_HFCLKSTOP; /*!< Stop HFCLK clock source. */
+ __O uint32_t TASKS_LFCLKSTART; /*!< Start LFCLK clock source. */
+ __O uint32_t TASKS_LFCLKSTOP; /*!< Stop LFCLK clock source. */
+ __O uint32_t TASKS_CAL; /*!< Start calibration of LFCLK RC oscillator. */
+ __O uint32_t TASKS_CTSTART; /*!< Start calibration timer. */
+ __O uint32_t TASKS_CTSTOP; /*!< Stop calibration timer. */
+ __I uint32_t RESERVED0[57];
+ __IO uint32_t EVENTS_HFCLKSTARTED; /*!< HFCLK oscillator started. */
+ __IO uint32_t EVENTS_LFCLKSTARTED; /*!< LFCLK oscillator started. */
+ __I uint32_t RESERVED1;
+ __IO uint32_t EVENTS_DONE; /*!< Callibration of LFCLK RC oscillator completed. */
+ __IO uint32_t EVENTS_CTTO; /*!< Callibration timer timeout. */
+ __I uint32_t RESERVED2[124];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[64];
+ __I uint32_t HFCLKSTAT; /*!< High frequency clock status. */
+ __I uint32_t RESERVED4[2];
+ __I uint32_t LFCLKSTAT; /*!< Low frequency clock status. */
+ __I uint32_t RESERVED5[63];
+ __IO uint32_t LFCLKSRC; /*!< Clock source for the LFCLK clock. */
+ __I uint32_t RESERVED6[7];
+ __IO uint32_t CTIV; /*!< Calibration timer interval. */
+ __I uint32_t RESERVED7[5];
+ __IO uint32_t XTALFREQ; /*!< Crystal frequency. */
+} NRF_CLOCK_Type;
+
+
+/* ================================================================================ */
+/* ================ MPU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Memory Protection Unit. (MPU)
+ */
+
+typedef struct { /*!< MPU Structure */
+ __I uint32_t RESERVED0[330];
+ __IO uint32_t PERR0; /*!< Configuration of peripherals in mpu regions. */
+ __IO uint32_t RLENR0; /*!< Length of RAM region 0. */
+ __I uint32_t RESERVED1[52];
+ __IO uint32_t PROTENSET0; /*!< Protection bit enable set register for low addresses. */
+ __IO uint32_t PROTENSET1; /*!< Protection bit enable set register for high addresses. */
+ __IO uint32_t DISABLEINDEBUG; /*!< Disable protection mechanism in debug mode. */
+} NRF_MPU_Type;
+
+
+/* ================================================================================ */
+/* ================ PU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Patch unit. (PU)
+ */
+
+typedef struct { /*!< PU Structure */
+ __I uint32_t RESERVED0[448];
+ __IO uint32_t REPLACEADDR[8]; /*!< Address of first instruction to replace. */
+ __I uint32_t RESERVED1[24];
+ __IO uint32_t PATCHADDR[8]; /*!< Relative address of patch instructions. */
+ __I uint32_t RESERVED2[24];
+ __IO uint32_t PATCHEN; /*!< Patch enable register. */
+ __IO uint32_t PATCHENSET; /*!< Patch enable register. */
+ __IO uint32_t PATCHENCLR; /*!< Patch disable register. */
+} NRF_PU_Type;
+
+
+/* ================================================================================ */
+/* ================ AMLI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AHB Multi-Layer Interface. (AMLI)
+ */
+
+typedef struct { /*!< AMLI Structure */
+ __I uint32_t RESERVED0[896];
+ AMLI_RAMPRI_Type RAMPRI; /*!< RAM configurable priority configuration structure. */
+} NRF_AMLI_Type;
+
+
+/* ================================================================================ */
+/* ================ RADIO ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief The radio. (RADIO)
+ */
+
+typedef struct { /*!< RADIO Structure */
+ __O uint32_t TASKS_TXEN; /*!< Enable radio in TX mode. */
+ __O uint32_t TASKS_RXEN; /*!< Enable radio in RX mode. */
+ __O uint32_t TASKS_START; /*!< Start radio. */
+ __O uint32_t TASKS_STOP; /*!< Stop radio. */
+ __O uint32_t TASKS_DISABLE; /*!< Disable radio. */
+ __O uint32_t TASKS_RSSISTART; /*!< Start the RSSI and take one sample of the receive signal strength. */
+ __O uint32_t TASKS_RSSISTOP; /*!< Stop the RSSI measurement. */
+ __O uint32_t TASKS_BCSTART; /*!< Start the bit counter. */
+ __O uint32_t TASKS_BCSTOP; /*!< Stop the bit counter. */
+ __I uint32_t RESERVED0[55];
+ __IO uint32_t EVENTS_READY; /*!< Ready event. */
+ __IO uint32_t EVENTS_ADDRESS; /*!< Address event. */
+ __IO uint32_t EVENTS_PAYLOAD; /*!< Payload event. */
+ __IO uint32_t EVENTS_END; /*!< End event. */
+ __IO uint32_t EVENTS_DISABLED; /*!< Disable event. */
+ __IO uint32_t EVENTS_DEVMATCH; /*!< A device address match occurred on the last received packet. */
+ __IO uint32_t EVENTS_DEVMISS; /*!< No device address match occurred on the last received packet. */
+ __IO uint32_t EVENTS_RSSIEND; /*!< Sampling of the receive signal strength complete. A new RSSI
+ sample is ready for readout at the RSSISAMPLE register. */
+ __I uint32_t RESERVED1[2];
+ __IO uint32_t EVENTS_BCMATCH; /*!< Bit counter reached bit count value specified in BC register. */
+ __I uint32_t RESERVED2[53];
+ __IO uint32_t SHORTS; /*!< Shortcut for the radio. */
+ __I uint32_t RESERVED3[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED4[61];
+ __I uint32_t CRCSTATUS; /*!< CRC status of received packet. */
+ __I uint32_t RESERVED5;
+ __I uint32_t RXMATCH; /*!< Received address. */
+ __I uint32_t RXCRC; /*!< Received CRC. */
+ __IO uint32_t DAI; /*!< Device address match index. */
+ __I uint32_t RESERVED6[60];
+ __IO uint32_t PACKETPTR; /*!< Packet pointer. Decision point: START task. */
+ __IO uint32_t FREQUENCY; /*!< Frequency. */
+ __IO uint32_t TXPOWER; /*!< Output power. */
+ __IO uint32_t MODE; /*!< Data rate and modulation. */
+ __IO uint32_t PCNF0; /*!< Packet configuration 0. */
+ __IO uint32_t PCNF1; /*!< Packet configuration 1. */
+ __IO uint32_t BASE0; /*!< Radio base address 0. Decision point: START task. */
+ __IO uint32_t BASE1; /*!< Radio base address 1. Decision point: START task. */
+ __IO uint32_t PREFIX0; /*!< Prefixes bytes for logical addresses 0 to 3. */
+ __IO uint32_t PREFIX1; /*!< Prefixes bytes for logical addresses 4 to 7. */
+ __IO uint32_t TXADDRESS; /*!< Transmit address select. */
+ __IO uint32_t RXADDRESSES; /*!< Receive address select. */
+ __IO uint32_t CRCCNF; /*!< CRC configuration. */
+ __IO uint32_t CRCPOLY; /*!< CRC polynomial. */
+ __IO uint32_t CRCINIT; /*!< CRC initial value. */
+ __IO uint32_t TEST; /*!< Test features enable register. */
+ __IO uint32_t TIFS; /*!< Inter Frame Spacing in microseconds. */
+ __IO uint32_t RSSISAMPLE; /*!< RSSI sample. */
+ __I uint32_t RESERVED7;
+ __I uint32_t STATE; /*!< Current radio state. */
+ __IO uint32_t DATAWHITEIV; /*!< Data whitening initial value. */
+ __I uint32_t RESERVED8[2];
+ __IO uint32_t BCC; /*!< Bit counter compare. */
+ __I uint32_t RESERVED9[39];
+ __IO uint32_t DAB[8]; /*!< Device address base segment. */
+ __IO uint32_t DAP[8]; /*!< Device address prefix. */
+ __IO uint32_t DACNF; /*!< Device address match configuration. */
+ __I uint32_t RESERVED10[56];
+ __IO uint32_t OVERRIDE0; /*!< Trim value override register 0. */
+ __IO uint32_t OVERRIDE1; /*!< Trim value override register 1. */
+ __IO uint32_t OVERRIDE2; /*!< Trim value override register 2. */
+ __IO uint32_t OVERRIDE3; /*!< Trim value override register 3. */
+ __IO uint32_t OVERRIDE4; /*!< Trim value override register 4. */
+ __I uint32_t RESERVED11[561];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RADIO_Type;
+
+
+/* ================================================================================ */
+/* ================ UART ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Universal Asynchronous Receiver/Transmitter. (UART)
+ */
+
+typedef struct { /*!< UART Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start UART receiver. */
+ __O uint32_t TASKS_STOPRX; /*!< Stop UART receiver. */
+ __O uint32_t TASKS_STARTTX; /*!< Start UART transmitter. */
+ __O uint32_t TASKS_STOPTX; /*!< Stop UART transmitter. */
+ __I uint32_t RESERVED0[3];
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend UART. */
+ __I uint32_t RESERVED1[56];
+ __IO uint32_t EVENTS_CTS; /*!< CTS activated. */
+ __IO uint32_t EVENTS_NCTS; /*!< CTS deactivated. */
+ __IO uint32_t EVENTS_RXDRDY; /*!< Data received in RXD. */
+ __I uint32_t RESERVED2[4];
+ __IO uint32_t EVENTS_TXDRDY; /*!< Data sent from TXD. */
+ __I uint32_t RESERVED3;
+ __IO uint32_t EVENTS_ERROR; /*!< Error detected. */
+ __I uint32_t RESERVED4[7];
+ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */
+ __I uint32_t RESERVED5[46];
+ __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */
+ __I uint32_t RESERVED6[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED7[93];
+ __IO uint32_t ERRORSRC; /*!< Error source. Write error field to 1 to clear error. */
+ __I uint32_t RESERVED8[31];
+ __IO uint32_t ENABLE; /*!< Enable UART and acquire IOs. */
+ __I uint32_t RESERVED9;
+ __IO uint32_t PSELRTS; /*!< Pin select for RTS. */
+ __IO uint32_t PSELTXD; /*!< Pin select for TXD. */
+ __IO uint32_t PSELCTS; /*!< Pin select for CTS. */
+ __IO uint32_t PSELRXD; /*!< Pin select for RXD. */
+ __I uint32_t RXD; /*!< RXD register. On read action the buffer pointer is displaced.
+ Once read the character is consummed. If read when no character
+ available, the UART will stop working. */
+ __O uint32_t TXD; /*!< TXD register. */
+ __I uint32_t RESERVED10;
+ __IO uint32_t BAUDRATE; /*!< UART Baudrate. */
+ __I uint32_t RESERVED11[17];
+ __IO uint32_t CONFIG; /*!< Configuration of parity and hardware flow control register. */
+ __I uint32_t RESERVED12[675];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_UART_Type;
+
+
+/* ================================================================================ */
+/* ================ SPI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI master 0. (SPI)
+ */
+
+typedef struct { /*!< SPI Structure */
+ __I uint32_t RESERVED0[66];
+ __IO uint32_t EVENTS_READY; /*!< TXD byte sent and RXD byte received. */
+ __I uint32_t RESERVED1[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[125];
+ __IO uint32_t ENABLE; /*!< Enable SPI. */
+ __I uint32_t RESERVED3;
+ __IO uint32_t PSELSCK; /*!< Pin select for SCK. */
+ __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */
+ __IO uint32_t PSELMISO; /*!< Pin select for MISO. */
+ __I uint32_t RESERVED4;
+ __IO uint32_t RXD; /*!< RX data. */
+ __IO uint32_t TXD; /*!< TX data. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t FREQUENCY; /*!< SPI frequency */
+ __I uint32_t RESERVED6[11];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED7[681];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_SPI_Type;
+
+
+/* ================================================================================ */
+/* ================ TWI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Two-wire interface master 0. (TWI)
+ */
+
+typedef struct { /*!< TWI Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start 2-Wire master receive sequence. */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STARTTX; /*!< Start 2-Wire master transmit sequence. */
+ __I uint32_t RESERVED1[2];
+ __O uint32_t TASKS_STOP; /*!< Stop 2-Wire transaction. */
+ __I uint32_t RESERVED2;
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend 2-Wire transaction. */
+ __O uint32_t TASKS_RESUME; /*!< Resume 2-Wire transaction. */
+ __I uint32_t RESERVED3[56];
+ __IO uint32_t EVENTS_STOPPED; /*!< Two-wire stopped. */
+ __IO uint32_t EVENTS_RXDREADY; /*!< Two-wire ready to deliver new RXD byte received. */
+ __I uint32_t RESERVED4[4];
+ __IO uint32_t EVENTS_TXDSENT; /*!< Two-wire finished sending last TXD byte. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t EVENTS_ERROR; /*!< Two-wire error detected. */
+ __I uint32_t RESERVED6[4];
+ __IO uint32_t EVENTS_BB; /*!< Two-wire byte boundary. */
+ __I uint32_t RESERVED7[49];
+ __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */
+ __I uint32_t RESERVED8[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED9[110];
+ __IO uint32_t ERRORSRC; /*!< Two-wire error source. Write error field to 1 to clear error. */
+ __I uint32_t RESERVED10[14];
+ __IO uint32_t ENABLE; /*!< Enable two-wire master. */
+ __I uint32_t RESERVED11;
+ __IO uint32_t PSELSCL; /*!< Pin select for SCL. */
+ __IO uint32_t PSELSDA; /*!< Pin select for SDA. */
+ __I uint32_t RESERVED12[2];
+ __IO uint32_t RXD; /*!< RX data register. */
+ __IO uint32_t TXD; /*!< TX data register. */
+ __I uint32_t RESERVED13;
+ __IO uint32_t FREQUENCY; /*!< Two-wire frequency. */
+ __I uint32_t RESERVED14[24];
+ __IO uint32_t ADDRESS; /*!< Address used in the two-wire transfer. */
+ __I uint32_t RESERVED15[668];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TWI_Type;
+
+
+/* ================================================================================ */
+/* ================ SPIS ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI slave 1. (SPIS)
+ */
+
+typedef struct { /*!< SPIS Structure */
+ __I uint32_t RESERVED0[9];
+ __O uint32_t TASKS_ACQUIRE; /*!< Acquire SPI semaphore. */
+ __O uint32_t TASKS_RELEASE; /*!< Release SPI semaphore. */
+ __I uint32_t RESERVED1[54];
+ __IO uint32_t EVENTS_END; /*!< Granted transaction completed. */
+ __I uint32_t RESERVED2[8];
+ __IO uint32_t EVENTS_ACQUIRED; /*!< Semaphore acquired. */
+ __I uint32_t RESERVED3[53];
+ __IO uint32_t SHORTS; /*!< Shortcuts for SPIS. */
+ __I uint32_t RESERVED4[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED5[61];
+ __I uint32_t SEMSTAT; /*!< Semaphore status. */
+ __I uint32_t RESERVED6[15];
+ __IO uint32_t STATUS; /*!< Status from last transaction. */
+ __I uint32_t RESERVED7[47];
+ __IO uint32_t ENABLE; /*!< Enable SPIS. */
+ __I uint32_t RESERVED8;
+ __IO uint32_t PSELSCK; /*!< Pin select for SCK. */
+ __IO uint32_t PSELMISO; /*!< Pin select for MISO. */
+ __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */
+ __IO uint32_t PSELCSN; /*!< Pin select for CSN. */
+ __I uint32_t RESERVED9[7];
+ __IO uint32_t RXDPTR; /*!< RX data pointer. */
+ __IO uint32_t MAXRX; /*!< Maximum number of bytes in the receive buffer. */
+ __IO uint32_t AMOUNTRX; /*!< Number of bytes received in last granted transaction. */
+ __I uint32_t RESERVED10;
+ __IO uint32_t TXDPTR; /*!< TX data pointer. */
+ __IO uint32_t MAXTX; /*!< Maximum number of bytes in the transmit buffer. */
+ __IO uint32_t AMOUNTTX; /*!< Number of bytes transmitted in last granted transaction. */
+ __I uint32_t RESERVED11;
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED12;
+ __IO uint32_t DEF; /*!< Default character. */
+ __I uint32_t RESERVED13[24];
+ __IO uint32_t ORC; /*!< Over-read character. */
+ __I uint32_t RESERVED14[654];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_SPIS_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIOTE ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief GPIO tasks and events. (GPIOTE)
+ */
+
+typedef struct { /*!< GPIOTE Structure */
+ __O uint32_t TASKS_OUT[4]; /*!< Tasks asssociated with GPIOTE channels. */
+ __I uint32_t RESERVED0[60];
+ __IO uint32_t EVENTS_IN[4]; /*!< Tasks asssociated with GPIOTE channels. */
+ __I uint32_t RESERVED1[27];
+ __IO uint32_t EVENTS_PORT; /*!< Event generated from multiple pins. */
+ __I uint32_t RESERVED2[97];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[129];
+ __IO uint32_t CONFIG[4]; /*!< Channel configuration registers. */
+ __I uint32_t RESERVED4[695];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_GPIOTE_Type;
+
+
+/* ================================================================================ */
+/* ================ ADC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Analog to digital converter. (ADC)
+ */
+
+typedef struct { /*!< ADC Structure */
+ __O uint32_t TASKS_START; /*!< Start an ADC conversion. */
+ __O uint32_t TASKS_STOP; /*!< Stop ADC. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_END; /*!< ADC conversion complete. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[61];
+ __I uint32_t BUSY; /*!< ADC busy register. */
+ __I uint32_t RESERVED3[63];
+ __IO uint32_t ENABLE; /*!< ADC enable. */
+ __IO uint32_t CONFIG; /*!< ADC configuration register. */
+ __I uint32_t RESULT; /*!< Result of ADC conversion. */
+ __I uint32_t RESERVED4[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_ADC_Type;
+
+
+/* ================================================================================ */
+/* ================ TIMER ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Timer 0. (TIMER)
+ */
+
+typedef struct { /*!< TIMER Structure */
+ __O uint32_t TASKS_START; /*!< Start Timer. */
+ __O uint32_t TASKS_STOP; /*!< Stop Timer. */
+ __O uint32_t TASKS_COUNT; /*!< Increment Timer (In counter mode). */
+ __O uint32_t TASKS_CLEAR; /*!< Clear timer. */
+ __I uint32_t RESERVED0[12];
+ __O uint32_t TASKS_CAPTURE[4]; /*!< Capture Timer value to CC[n] registers. */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */
+ __I uint32_t RESERVED2[44];
+ __IO uint32_t SHORTS; /*!< Shortcuts for Timer. */
+ __I uint32_t RESERVED3[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED4[126];
+ __IO uint32_t MODE; /*!< Timer Mode selection. */
+ __IO uint32_t BITMODE; /*!< Sets timer behaviour. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t PRESCALER; /*!< 4-bit prescaler to source clock frequency (max value 9). Source
+ clock frequency is divided by 2^SCALE. */
+ __I uint32_t RESERVED6[11];
+ __IO uint32_t CC[4]; /*!< Capture/compare registers. */
+ __I uint32_t RESERVED7[683];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TIMER_Type;
+
+
+/* ================================================================================ */
+/* ================ RTC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Real time counter 0. (RTC)
+ */
+
+typedef struct { /*!< RTC Structure */
+ __O uint32_t TASKS_START; /*!< Start RTC Counter. */
+ __O uint32_t TASKS_STOP; /*!< Stop RTC Counter. */
+ __O uint32_t TASKS_CLEAR; /*!< Clear RTC Counter. */
+ __O uint32_t TASKS_TRIGOVRFLW; /*!< Set COUNTER to 0xFFFFFFF0. */
+ __I uint32_t RESERVED0[60];
+ __IO uint32_t EVENTS_TICK; /*!< Event on COUNTER increment. */
+ __IO uint32_t EVENTS_OVRFLW; /*!< Event on COUNTER overflow. */
+ __I uint32_t RESERVED1[14];
+ __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */
+ __I uint32_t RESERVED2[109];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[13];
+ __IO uint32_t EVTEN; /*!< Configures event enable routing to PPI for each RTC event. */
+ __IO uint32_t EVTENSET; /*!< Enable events routing to PPI. The reading of this register gives
+ the value of EVTEN. */
+ __IO uint32_t EVTENCLR; /*!< Disable events routing to PPI. The reading of this register
+ gives the value of EVTEN. */
+ __I uint32_t RESERVED4[110];
+ __IO uint32_t COUNTER; /*!< Current COUNTER value. */
+ __IO uint32_t PRESCALER; /*!< 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)).
+ Must be written when RTC is STOPed. */
+ __I uint32_t RESERVED5[13];
+ __IO uint32_t CC[4]; /*!< Capture/compare registers. */
+ __I uint32_t RESERVED6[683];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RTC_Type;
+
+
+/* ================================================================================ */
+/* ================ TEMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Temperature Sensor. (TEMP)
+ */
+
+typedef struct { /*!< TEMP Structure */
+ __O uint32_t TASKS_START; /*!< Start temperature measurement. */
+ __O uint32_t TASKS_STOP; /*!< Stop temperature measurement. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_DATARDY; /*!< Temperature measurement complete, data ready event. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[127];
+ __I int32_t TEMP; /*!< Die temperature in degC, 2's complement format, 0.25 degC pecision. */
+ __I uint32_t RESERVED3[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TEMP_Type;
+
+
+/* ================================================================================ */
+/* ================ RNG ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Random Number Generator. (RNG)
+ */
+
+typedef struct { /*!< RNG Structure */
+ __O uint32_t TASKS_START; /*!< Start the random number generator. */
+ __O uint32_t TASKS_STOP; /*!< Stop the random number generator. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_VALRDY; /*!< New random number generated and written to VALUE register. */
+ __I uint32_t RESERVED1[63];
+ __IO uint32_t SHORTS; /*!< Shortcut for the RNG. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register */
+ __I uint32_t RESERVED3[126];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t VALUE; /*!< RNG random number. */
+ __I uint32_t RESERVED4[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RNG_Type;
+
+
+/* ================================================================================ */
+/* ================ ECB ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AES ECB Mode Encryption. (ECB)
+ */
+
+typedef struct { /*!< ECB Structure */
+ __O uint32_t TASKS_STARTECB; /*!< Start ECB block encrypt. If a crypto operation is running, this
+ will not initiate a new encryption and the ERRORECB event will
+ be triggered. */
+ __O uint32_t TASKS_STOPECB; /*!< Stop current ECB encryption. If a crypto operation is running,
+ this will will trigger the ERRORECB event. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_ENDECB; /*!< ECB block encrypt complete. */
+ __IO uint32_t EVENTS_ERRORECB; /*!< ECB block encrypt aborted due to a STOPECB task or due to an
+ error. */
+ __I uint32_t RESERVED1[127];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t ECBDATAPTR; /*!< ECB block encrypt memory pointer. */
+ __I uint32_t RESERVED3[701];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_ECB_Type;
+
+
+/* ================================================================================ */
+/* ================ AAR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Accelerated Address Resolver. (AAR)
+ */
+
+typedef struct { /*!< AAR Structure */
+ __O uint32_t TASKS_START; /*!< Start resolving addresses based on IRKs specified in the IRK
+ data structure. */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STOP; /*!< Stop resolving addresses. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t EVENTS_END; /*!< Address resolution procedure completed. */
+ __IO uint32_t EVENTS_RESOLVED; /*!< Address resolved. */
+ __IO uint32_t EVENTS_NOTRESOLVED; /*!< Address not resolved. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t STATUS; /*!< Resolution status. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable AAR. */
+ __IO uint32_t NIRK; /*!< Number of Identity root Keys in the IRK data structure. */
+ __IO uint32_t IRKPTR; /*!< Pointer to the IRK data structure. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t ADDRPTR; /*!< Pointer to the resolvable address (6 bytes). */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to "scratch" data area used for temporary storage during
+ resolution. A minimum of 3 bytes must be reserved. */
+ __I uint32_t RESERVED6[697];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_AAR_Type;
+
+
+/* ================================================================================ */
+/* ================ CCM ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AES CCM Mode Encryption. (CCM)
+ */
+
+typedef struct { /*!< CCM Structure */
+ __O uint32_t TASKS_KSGEN; /*!< Start generation of key-stream. This operation will stop by
+ itself when completed. */
+ __O uint32_t TASKS_CRYPT; /*!< Start encrypt/decrypt. This operation will stop by itself when
+ completed. */
+ __O uint32_t TASKS_STOP; /*!< Stop encrypt/decrypt. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_ENDKSGEN; /*!< Keystream generation completed. */
+ __IO uint32_t EVENTS_ENDCRYPT; /*!< Encrypt/decrypt completed. */
+ __IO uint32_t EVENTS_ERROR; /*!< Error happened. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t SHORTS; /*!< Shortcut for the CCM. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t MICSTATUS; /*!< CCM RX MIC check result. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< CCM enable. */
+ __IO uint32_t MODE; /*!< Operation mode. */
+ __IO uint32_t CNFPTR; /*!< Pointer to data structure holding AES key and NONCE vector. */
+ __IO uint32_t INPTR; /*!< Pointer to input packet. */
+ __IO uint32_t OUTPTR; /*!< Pointer to output packet. */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to "scratch" data area used for temporary storage during
+ resolution. A minimum of 43 bytes must be reserved. */
+ __I uint32_t RESERVED5[697];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_CCM_Type;
+
+
+/* ================================================================================ */
+/* ================ WDT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Watchdog Timer. (WDT)
+ */
+
+typedef struct { /*!< WDT Structure */
+ __O uint32_t TASKS_START; /*!< Start the watchdog. */
+ __I uint32_t RESERVED0[63];
+ __IO uint32_t EVENTS_TIMEOUT; /*!< Watchdog timeout. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[61];
+ __I uint32_t RUNSTATUS; /*!< Watchdog running status. */
+ __I uint32_t REQSTATUS; /*!< Request status. */
+ __I uint32_t RESERVED3[63];
+ __IO uint32_t CRV; /*!< Counter reload value in number of 32kiHz clock cycles. */
+ __IO uint32_t RREN; /*!< Reload request enable. */
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED4[60];
+ __O uint32_t RR[8]; /*!< Reload requests registers. */
+ __I uint32_t RESERVED5[631];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_WDT_Type;
+
+
+/* ================================================================================ */
+/* ================ QDEC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Rotary decoder. (QDEC)
+ */
+
+typedef struct { /*!< QDEC Structure */
+ __O uint32_t TASKS_START; /*!< Start the quadrature decoder. */
+ __O uint32_t TASKS_STOP; /*!< Stop the quadrature decoder. */
+ __O uint32_t TASKS_READCLRACC; /*!< Transfers the content from ACC registers to ACCREAD registers,
+ and clears the ACC registers. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_SAMPLERDY; /*!< A new sample is written to the sample register. */
+ __IO uint32_t EVENTS_REPORTRDY; /*!< REPORTPER number of samples accumulated in ACC register, and
+ ACC register different than zero. */
+ __IO uint32_t EVENTS_ACCOF; /*!< ACC or ACCDBL register overflow. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t SHORTS; /*!< Shortcut for the QDEC. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[125];
+ __IO uint32_t ENABLE; /*!< Enable the QDEC. */
+ __IO uint32_t LEDPOL; /*!< LED output pin polarity. */
+ __IO uint32_t SAMPLEPER; /*!< Sample period. */
+ __I int32_t SAMPLE; /*!< Motion sample value. */
+ __IO uint32_t REPORTPER; /*!< Number of samples to generate an EVENT_REPORTRDY. */
+ __I int32_t ACC; /*!< Accumulated valid transitions register. */
+ __I int32_t ACCREAD; /*!< Snapshot of ACC register. Value generated by the TASKS_READCLEACC
+ task. */
+ __IO uint32_t PSELLED; /*!< Pin select for LED output. */
+ __IO uint32_t PSELA; /*!< Pin select for phase A input. */
+ __IO uint32_t PSELB; /*!< Pin select for phase B input. */
+ __IO uint32_t DBFEN; /*!< Enable debouncer input filters. */
+ __I uint32_t RESERVED4[5];
+ __IO uint32_t LEDPRE; /*!< Time LED is switched ON before the sample. */
+ __I uint32_t ACCDBL; /*!< Accumulated double (error) transitions register. */
+ __I uint32_t ACCDBLREAD; /*!< Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC
+ task. */
+ __I uint32_t RESERVED5[684];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_QDEC_Type;
+
+
+/* ================================================================================ */
+/* ================ LPCOMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Wakeup Comparator. (LPCOMP)
+ */
+
+typedef struct { /*!< LPCOMP Structure */
+ __O uint32_t TASKS_START; /*!< Start the comparator. */
+ __O uint32_t TASKS_STOP; /*!< Stop the comparator. */
+ __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_READY; /*!< LPCOMP is ready and output is valid. */
+ __IO uint32_t EVENTS_DOWN; /*!< Input voltage crossed the threshold going down. */
+ __IO uint32_t EVENTS_UP; /*!< Input voltage crossed the threshold going up. */
+ __IO uint32_t EVENTS_CROSS; /*!< Input voltage crossed the threshold in any direction. */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t SHORTS; /*!< Shortcut for the LPCOMP. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t RESULT; /*!< Result of last compare. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable the LPCOMP. */
+ __IO uint32_t PSEL; /*!< Input pin select. */
+ __IO uint32_t REFSEL; /*!< Reference select. */
+ __IO uint32_t EXTREFSEL; /*!< External reference select. */
+ __I uint32_t RESERVED5[4];
+ __IO uint32_t ANADETECT; /*!< Analog detect configuration. */
+ __I uint32_t RESERVED6[694];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_LPCOMP_Type;
+
+
+/* ================================================================================ */
+/* ================ COMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Comparator. (COMP)
+ */
+
+typedef struct { /*!< COMP Structure */
+ __O uint32_t TASKS_START; /*!< Start the comparator. */
+ __O uint32_t TASKS_STOP; /*!< Stop the comparator. */
+ __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_READY; /*!< COMP is ready and output is valid. */
+ __IO uint32_t EVENTS_DOWN; /*!< Input voltage crossed the threshold going down. */
+ __IO uint32_t EVENTS_UP; /*!< Input voltage crossed the threshold going up. */
+ __IO uint32_t EVENTS_CROSS; /*!< Input voltage crossed the threshold in any direction. */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t SHORTS; /*!< Shortcut for the COMP. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t RESULT; /*!< Compare result. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable the COMP. */
+ __IO uint32_t PSEL; /*!< Input pin select. */
+ __IO uint32_t REFSEL; /*!< Reference select. */
+ __IO uint32_t EXTREFSEL; /*!< External reference select. */
+ __I uint32_t RESERVED5[8];
+ __IO uint32_t TH; /*!< Threshold configuration for hysteresis unit. */
+ __IO uint32_t MODE; /*!< Mode configuration. */
+ __I uint32_t RESERVED6[689];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_COMP_Type;
+
+
+/* ================================================================================ */
+/* ================ SWI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SW Interrupts. (SWI)
+ */
+
+typedef struct { /*!< SWI Structure */
+ __I uint32_t UNUSED; /*!< Unused. */
+} NRF_SWI_Type;
+
+
+/* ================================================================================ */
+/* ================ NVMC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Non Volatile Memory Controller. (NVMC)
+ */
+
+typedef struct { /*!< NVMC Structure */
+ __I uint32_t RESERVED0[256];
+ __I uint32_t READY; /*!< Ready flag. */
+ __I uint32_t RESERVED1[64];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __IO uint32_t ERASEPAGE; /*!< Register for erasing a non-protected non-volatile memory page. */
+ __IO uint32_t ERASEALL; /*!< Register for erasing all non-volatile user memory. */
+ __IO uint32_t ERASEPROTECTEDPAGE; /*!< Register for erasing a protected non-volatile memory page. */
+ __IO uint32_t ERASEUICR; /*!< Register for start erasing User Information Congfiguration Registers. */
+} NRF_NVMC_Type;
+
+
+/* ================================================================================ */
+/* ================ PPI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief PPI controller. (PPI)
+ */
+
+typedef struct { /*!< PPI Structure */
+ PPI_TASKS_CHG_Type TASKS_CHG[4]; /*!< Channel group tasks. */
+ __I uint32_t RESERVED0[312];
+ __IO uint32_t CHEN; /*!< Channel enable. */
+ __IO uint32_t CHENSET; /*!< Channel enable set. */
+ __IO uint32_t CHENCLR; /*!< Channel enable clear. */
+ __I uint32_t RESERVED1;
+ PPI_CH_Type CH[16]; /*!< PPI Channel. */
+ __I uint32_t RESERVED2[156];
+ __IO uint32_t CHG[4]; /*!< Channel group configuration. */
+} NRF_PPI_Type;
+
+
+/* ================================================================================ */
+/* ================ FICR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Factory Information Configuration. (FICR)
+ */
+
+typedef struct { /*!< FICR Structure */
+ __I uint32_t RESERVED0[4];
+ __I uint32_t CODEPAGESIZE; /*!< Code memory page size in bytes. */
+ __I uint32_t CODESIZE; /*!< Code memory size in pages. */
+ __I uint32_t RESERVED1[4];
+ __I uint32_t CLENR0; /*!< Length of code region 0 in bytes. */
+ __I uint32_t PPFC; /*!< Pre-programmed factory code present. */
+ __I uint32_t RESERVED2;
+ __I uint32_t NUMRAMBLOCK; /*!< Number of individualy controllable RAM blocks. */
+ __I uint32_t SIZERAMBLOCK[4]; /*!< Size of RAM block in bytes. */
+ __I uint32_t RESERVED3[5];
+ __I uint32_t CONFIGID; /*!< Configuration identifier. */
+ __I uint32_t DEVICEID[2]; /*!< Device identifier. */
+ __I uint32_t RESERVED4[6];
+ __I uint32_t ER[4]; /*!< Encryption root. */
+ __I uint32_t IR[4]; /*!< Identity root. */
+ __I uint32_t DEVICEADDRTYPE; /*!< Device address type. */
+ __I uint32_t DEVICEADDR[2]; /*!< Device address. */
+ __I uint32_t OVERRIDEEN; /*!< Radio calibration override enable. */
+ __I uint32_t RESERVED5[15];
+ __I uint32_t BLE_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for BLE_1Mbit
+ mode. */
+} NRF_FICR_Type;
+
+
+/* ================================================================================ */
+/* ================ UICR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief User Information Configuration. (UICR)
+ */
+
+typedef struct { /*!< UICR Structure */
+ __IO uint32_t CLENR0; /*!< Length of code region 0. */
+ __IO uint32_t RBPCONF; /*!< Readback protection configuration. */
+ __IO uint32_t XTALFREQ; /*!< Reset value for CLOCK XTALFREQ register. */
+ __I uint32_t RESERVED0;
+ __I uint32_t FWID; /*!< Firmware ID. */
+ __IO uint32_t BOOTLOADERADDR; /*!< Bootloader start address. */
+} NRF_UICR_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIO ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief General purpose input and output. (GPIO)
+ */
+
+typedef struct { /*!< GPIO Structure */
+ __I uint32_t RESERVED0[321];
+ __IO uint32_t OUT; /*!< Write GPIO port. */
+ __IO uint32_t OUTSET; /*!< Set individual bits in GPIO port. */
+ __IO uint32_t OUTCLR; /*!< Clear individual bits in GPIO port. */
+ __I uint32_t IN; /*!< Read GPIO port. */
+ __IO uint32_t DIR; /*!< Direction of GPIO pins. */
+ __IO uint32_t DIRSET; /*!< DIR set register. */
+ __IO uint32_t DIRCLR; /*!< DIR clear register. */
+ __I uint32_t RESERVED1[120];
+ __IO uint32_t PIN_CNF[32]; /*!< Configuration of GPIO pins. */
+} NRF_GPIO_Type;
+
+
+/* -------------------- End of section using anonymous unions ------------------- */
+#if defined(__CC_ARM)
+ #pragma pop
+#elif defined(__ICCARM__)
+ /* leave anonymous unions enabled */
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning restore
+#else
+ #warning Not supported compiler type
+#endif
+
+
+
+
+/* ================================================================================ */
+/* ================ Peripheral memory map ================ */
+/* ================================================================================ */
+
+#define NRF_POWER_BASE 0x40000000UL
+#define NRF_CLOCK_BASE 0x40000000UL
+#define NRF_MPU_BASE 0x40000000UL
+#define NRF_PU_BASE 0x40000000UL
+#define NRF_AMLI_BASE 0x40000000UL
+#define NRF_RADIO_BASE 0x40001000UL
+#define NRF_UART0_BASE 0x40002000UL
+#define NRF_SPI0_BASE 0x40003000UL
+#define NRF_TWI0_BASE 0x40003000UL
+#define NRF_SPI1_BASE 0x40004000UL
+#define NRF_TWI1_BASE 0x40004000UL
+#define NRF_SPIS1_BASE 0x40004000UL
+#define NRF_GPIOTE_BASE 0x40006000UL
+#define NRF_ADC_BASE 0x40007000UL
+#define NRF_TIMER0_BASE 0x40008000UL
+#define NRF_TIMER1_BASE 0x40009000UL
+#define NRF_TIMER2_BASE 0x4000A000UL
+#define NRF_RTC0_BASE 0x4000B000UL
+#define NRF_TEMP_BASE 0x4000C000UL
+#define NRF_RNG_BASE 0x4000D000UL
+#define NRF_ECB_BASE 0x4000E000UL
+#define NRF_AAR_BASE 0x4000F000UL
+#define NRF_CCM_BASE 0x4000F000UL
+#define NRF_WDT_BASE 0x40010000UL
+#define NRF_RTC1_BASE 0x40011000UL
+#define NRF_QDEC_BASE 0x40012000UL
+#define NRF_LPCOMP_BASE 0x40013000UL
+#define NRF_COMP_BASE 0x40013000UL
+#define NRF_SWI_BASE 0x40014000UL
+#define NRF_NVMC_BASE 0x4001E000UL
+#define NRF_PPI_BASE 0x4001F000UL
+#define NRF_FICR_BASE 0x10000000UL
+#define NRF_UICR_BASE 0x10001000UL
+#define NRF_GPIO_BASE 0x50000000UL
+
+
+/* ================================================================================ */
+/* ================ Peripheral declaration ================ */
+/* ================================================================================ */
+
+#define NRF_POWER ((NRF_POWER_Type *) NRF_POWER_BASE)
+#define NRF_CLOCK ((NRF_CLOCK_Type *) NRF_CLOCK_BASE)
+#define NRF_MPU ((NRF_MPU_Type *) NRF_MPU_BASE)
+#define NRF_PU ((NRF_PU_Type *) NRF_PU_BASE)
+#define NRF_AMLI ((NRF_AMLI_Type *) NRF_AMLI_BASE)
+#define NRF_RADIO ((NRF_RADIO_Type *) NRF_RADIO_BASE)
+#define NRF_UART0 ((NRF_UART_Type *) NRF_UART0_BASE)
+#define NRF_SPI0 ((NRF_SPI_Type *) NRF_SPI0_BASE)
+#define NRF_TWI0 ((NRF_TWI_Type *) NRF_TWI0_BASE)
+#define NRF_SPI1 ((NRF_SPI_Type *) NRF_SPI1_BASE)
+#define NRF_TWI1 ((NRF_TWI_Type *) NRF_TWI1_BASE)
+#define NRF_SPIS1 ((NRF_SPIS_Type *) NRF_SPIS1_BASE)
+#define NRF_GPIOTE ((NRF_GPIOTE_Type *) NRF_GPIOTE_BASE)
+#define NRF_ADC ((NRF_ADC_Type *) NRF_ADC_BASE)
+#define NRF_TIMER0 ((NRF_TIMER_Type *) NRF_TIMER0_BASE)
+#define NRF_TIMER1 ((NRF_TIMER_Type *) NRF_TIMER1_BASE)
+#define NRF_TIMER2 ((NRF_TIMER_Type *) NRF_TIMER2_BASE)
+#define NRF_RTC0 ((NRF_RTC_Type *) NRF_RTC0_BASE)
+#define NRF_TEMP ((NRF_TEMP_Type *) NRF_TEMP_BASE)
+#define NRF_RNG ((NRF_RNG_Type *) NRF_RNG_BASE)
+#define NRF_ECB ((NRF_ECB_Type *) NRF_ECB_BASE)
+#define NRF_AAR ((NRF_AAR_Type *) NRF_AAR_BASE)
+#define NRF_CCM ((NRF_CCM_Type *) NRF_CCM_BASE)
+#define NRF_WDT ((NRF_WDT_Type *) NRF_WDT_BASE)
+#define NRF_RTC1 ((NRF_RTC_Type *) NRF_RTC1_BASE)
+#define NRF_QDEC ((NRF_QDEC_Type *) NRF_QDEC_BASE)
+#define NRF_LPCOMP ((NRF_LPCOMP_Type *) NRF_LPCOMP_BASE)
+#define NRF_COMP ((NRF_COMP_Type *) NRF_COMP_BASE)
+#define NRF_SWI ((NRF_SWI_Type *) NRF_SWI_BASE)
+#define NRF_NVMC ((NRF_NVMC_Type *) NRF_NVMC_BASE)
+#define NRF_PPI ((NRF_PPI_Type *) NRF_PPI_BASE)
+#define NRF_FICR ((NRF_FICR_Type *) NRF_FICR_BASE)
+#define NRF_UICR ((NRF_UICR_Type *) NRF_UICR_BASE)
+#define NRF_GPIO ((NRF_GPIO_Type *) NRF_GPIO_BASE)
+
+
+/** @} */ /* End of group Device_Peripheral_Registers */
+/** @} */ /* End of group nRF51 */
+/** @} */ /* End of group Nordic Semiconductor */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* nRF51_H */
+
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/nrf51822.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed/TARGET_NRF51822/nrf51822.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,27 @@ +/* mbed Microcontroller Library + + * Copyright (c) 2013 Nordic Semiconductor. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + + +#ifndef NRF_H +#define NRF_H + +#include "nordic_global.h" +#include "compiler_abstraction.h" +#include "nrf51.h" +#include "nrf51_bitfields.h" +#endif /* NRF_H */ +
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/nrf51_bitfields.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed/TARGET_NRF51822/nrf51_bitfields.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,6461 @@ +/* Copyright (c) 2009 Nordic Semiconductor. All Rights Reserved. + * + * The information contained herein is property of Nordic Semiconductor ASA. + * Terms and conditions of usage are described in detail in NORDIC + * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT. + * + * Licensees are granted free, non-transferable use of the information. NO + * WARRANTY of ANY KIND is provided. This heading must NOT be removed from + * the file. + * + */ + + +#ifndef __NRF51_BITS_H +#define __NRF51_BITS_H + +/*lint ++flb "Enter library region */ + +//#include <core_cm0.h> + +/* Peripheral: AAR */ +/* Description: Accelerated Address Resolver. */ + +/* Register: AAR_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on NOTRESOLVED event. */ +#define AAR_INTENSET_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ +#define AAR_INTENSET_NOTRESOLVED_Msk (0x1UL << AAR_INTENSET_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ +#define AAR_INTENSET_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_NOTRESOLVED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on RESOLVED event. */ +#define AAR_INTENSET_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ +#define AAR_INTENSET_RESOLVED_Msk (0x1UL << AAR_INTENSET_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ +#define AAR_INTENSET_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_RESOLVED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on END event. */ +#define AAR_INTENSET_END_Pos (0UL) /*!< Position of END field. */ +#define AAR_INTENSET_END_Msk (0x1UL << AAR_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define AAR_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: AAR_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on NOTRESOLVED event. */ +#define AAR_INTENCLR_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ +#define AAR_INTENCLR_NOTRESOLVED_Msk (0x1UL << AAR_INTENCLR_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ +#define AAR_INTENCLR_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_NOTRESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on RESOLVED event. */ +#define AAR_INTENCLR_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ +#define AAR_INTENCLR_RESOLVED_Msk (0x1UL << AAR_INTENCLR_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ +#define AAR_INTENCLR_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_RESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDKSGEN event. */ +#define AAR_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ +#define AAR_INTENCLR_END_Msk (0x1UL << AAR_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define AAR_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: AAR_STATUS */ +/* Description: Resolution status. */ + +/* Bits 3..0 : The IRK used last time an address was resolved. */ +#define AAR_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */ +#define AAR_STATUS_STATUS_Msk (0xFUL << AAR_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */ + +/* Register: AAR_ENABLE */ +/* Description: Enable AAR. */ + +/* Bits 1..0 : Enable AAR. */ +#define AAR_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define AAR_ENABLE_ENABLE_Msk (0x3UL << AAR_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define AAR_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled AAR. */ +#define AAR_ENABLE_ENABLE_Enabled (0x03UL) /*!< Enable AAR. */ + +/* Register: AAR_NIRK */ +/* Description: Number of Identity root Keys in the IRK data structure. */ + +/* Bits 4..0 : Number of Identity root Keys in the IRK data structure. */ +#define AAR_NIRK_NIRK_Pos (0UL) /*!< Position of NIRK field. */ +#define AAR_NIRK_NIRK_Msk (0x1FUL << AAR_NIRK_NIRK_Pos) /*!< Bit mask of NIRK field. */ + +/* Register: AAR_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define AAR_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define AAR_POWER_POWER_Msk (0x1UL << AAR_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define AAR_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define AAR_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: ADC */ +/* Description: Analog to digital converter. */ + +/* Register: ADC_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 0 : Enable interrupt on END event. */ +#define ADC_INTENSET_END_Pos (0UL) /*!< Position of END field. */ +#define ADC_INTENSET_END_Msk (0x1UL << ADC_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define ADC_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define ADC_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define ADC_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: ADC_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 0 : Disable interrupt on END event. */ +#define ADC_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ +#define ADC_INTENCLR_END_Msk (0x1UL << ADC_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define ADC_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define ADC_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define ADC_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: ADC_BUSY */ +/* Description: ADC busy register. */ + +/* Bit 0 : ADC busy register. */ +#define ADC_BUSY_BUSY_Pos (0UL) /*!< Position of BUSY field. */ +#define ADC_BUSY_BUSY_Msk (0x1UL << ADC_BUSY_BUSY_Pos) /*!< Bit mask of BUSY field. */ +#define ADC_BUSY_BUSY_Ready (0UL) /*!< No ongoing ADC conversion is taking place. ADC is ready. */ +#define ADC_BUSY_BUSY_Busy (1UL) /*!< An ADC conversion is taking place. ADC is busy. */ + +/* Register: ADC_ENABLE */ +/* Description: ADC enable. */ + +/* Bits 1..0 : ADC enable. */ +#define ADC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define ADC_ENABLE_ENABLE_Msk (0x3UL << ADC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define ADC_ENABLE_ENABLE_Disabled (0x00UL) /*!< ADC is disabled. */ +#define ADC_ENABLE_ENABLE_Enabled (0x01UL) /*!< ADC is enabled. If an analog input pin is selected as source of the conversion, the selected pin is configured as an analog input. */ + +/* Register: ADC_CONFIG */ +/* Description: ADC configuration register. */ + +/* Bits 17..16 : ADC external reference pin selection. */ +#define ADC_CONFIG_EXTREFSEL_Pos (16UL) /*!< Position of EXTREFSEL field. */ +#define ADC_CONFIG_EXTREFSEL_Msk (0x3UL << ADC_CONFIG_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ +#define ADC_CONFIG_EXTREFSEL_None (0UL) /*!< Analog external reference inputs disabled. */ +#define ADC_CONFIG_EXTREFSEL_AnalogReference0 (1UL) /*!< Use analog reference 0 as reference. */ +#define ADC_CONFIG_EXTREFSEL_AnalogReference1 (2UL) /*!< Use analog reference 1 as reference. */ + +/* Bits 15..8 : ADC analog pin selection. */ +#define ADC_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ +#define ADC_CONFIG_PSEL_Msk (0xFFUL << ADC_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ +#define ADC_CONFIG_PSEL_Disabled (0UL) /*!< Analog input pins disabled. */ +#define ADC_CONFIG_PSEL_AnalogInput0 (1UL) /*!< Use analog input 0 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput1 (2UL) /*!< Use analog input 1 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput2 (4UL) /*!< Use analog input 2 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput3 (8UL) /*!< Use analog input 3 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput4 (16UL) /*!< Use analog input 4 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput5 (32UL) /*!< Use analog input 5 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput6 (64UL) /*!< Use analog input 6 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput7 (128UL) /*!< Use analog input 7 as analog input. */ + +/* Bits 6..5 : ADC reference selection. */ +#define ADC_CONFIG_REFSEL_Pos (5UL) /*!< Position of REFSEL field. */ +#define ADC_CONFIG_REFSEL_Msk (0x3UL << ADC_CONFIG_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ +#define ADC_CONFIG_REFSEL_VBG (0x00UL) /*!< Use internal 1.2V bandgap voltage as reference for conversion. */ +#define ADC_CONFIG_REFSEL_External (0x01UL) /*!< Use external source configured by EXTREFSEL as reference for conversion. */ +#define ADC_CONFIG_REFSEL_SupplyOneHalfPrescaling (0x02UL) /*!< Use supply voltage with 1/2 prescaling as reference for conversion. Only usable when supply voltage is between 1.7V and 2.6V. */ +#define ADC_CONFIG_REFSEL_SupplyOneThirdPrescaling (0x03UL) /*!< Use supply voltage with 1/3 prescaling as reference for conversion. Only usable when supply voltage is between 2.5V and 3.6V. */ + +/* Bits 4..2 : ADC input selection. */ +#define ADC_CONFIG_INPSEL_Pos (2UL) /*!< Position of INPSEL field. */ +#define ADC_CONFIG_INPSEL_Msk (0x7UL << ADC_CONFIG_INPSEL_Pos) /*!< Bit mask of INPSEL field. */ +#define ADC_CONFIG_INPSEL_AnalogInputNoPrescaling (0x00UL) /*!< Analog input specified by PSEL with no prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_AnalogInputTwoThirdsPrescaling (0x01UL) /*!< Analog input specified by PSEL with 2/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling (0x02UL) /*!< Analog input specified by PSEL with 1/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_SupplyTwoThirdsPrescaling (0x05UL) /*!< Supply voltage with 2/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling (0x06UL) /*!< Supply voltage with 1/3 prescaling used as input for the conversion. */ + +/* Bits 1..0 : ADC resolution. */ +#define ADC_CONFIG_RES_Pos (0UL) /*!< Position of RES field. */ +#define ADC_CONFIG_RES_Msk (0x3UL << ADC_CONFIG_RES_Pos) /*!< Bit mask of RES field. */ +#define ADC_CONFIG_RES_8bit (0x00UL) /*!< 8bit ADC resolution. */ +#define ADC_CONFIG_RES_9bit (0x01UL) /*!< 9bit ADC resolution. */ +#define ADC_CONFIG_RES_10bit (0x02UL) /*!< 10bit ADC resolution. */ + +/* Register: ADC_RESULT */ +/* Description: Result of ADC conversion. */ + +/* Bits 9..0 : Result of ADC conversion. */ +#define ADC_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ +#define ADC_RESULT_RESULT_Msk (0x3FFUL << ADC_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ + +/* Register: ADC_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define ADC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define ADC_POWER_POWER_Msk (0x1UL << ADC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define ADC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define ADC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: AMLI */ +/* Description: AHB Multi-Layer Interface. */ + +/* Register: AMLI_RAMPRI_CPU0 */ +/* Description: Configurable priority configuration register for CPU0. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_CPU0_RAM3_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM3_Pos) /*!< Bit mask of RAM3 field. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_CPU0_RAM2_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM2_Pos) /*!< Bit mask of RAM2 field. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_CPU0_RAM1_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM1_Pos) /*!< Bit mask of RAM1 field. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_CPU0_RAM0_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM0_Pos) /*!< Bit mask of RAM0 field. */ + +/* Register: AMLI_RAMPRI_SPIS1 */ +/* Description: Configurable priority configuration register for SPIS1. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM3_Pos) /*!< Bit mask of RAM3 field. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM2_Pos) /*!< Bit mask of RAM2 field. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM1_Pos) /*!< Bit mask of RAM1 field. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM0_Pos) /*!< Bit mask of RAM0 field. */ + +/* Register: AMLI_RAMPRI_RADIO */ +/* Description: Configurable priority configuration register for RADIO. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_RADIO_RAM3_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM3_Pos) /*!< Bit mask of RAM3 field. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_RADIO_RAM2_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM2_Pos) /*!< Bit mask of RAM2 field. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_RADIO_RAM1_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM1_Pos) /*!< Bit mask of RAM1 field. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_RADIO_RAM0_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM0_Pos) /*!< Bit mask of RAM0 field. */ + +/* Register: AMLI_RAMPRI_ECB */ +/* Description: Configurable priority configuration register for ECB. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_ECB_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_ECB_RAM3_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM3_Pos) /*!< Bit mask of RAM3 field. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_ECB_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_ECB_RAM2_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM2_Pos) /*!< Bit mask of RAM2 field. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_ECB_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_ECB_RAM1_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM1_Pos) /*!< Bit mask of RAM1 field. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_ECB_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_ECB_RAM0_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM0_Pos) /*!< Bit mask of RAM0 field. */ + +/* Register: AMLI_RAMPRI_CCM */ +/* Description: Configurable priority configuration register for CCM. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_CCM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_CCM_RAM3_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM3_Pos) /*!< Bit mask of RAM3 field. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_CCM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_CCM_RAM2_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM2_Pos) /*!< Bit mask of RAM2 field. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_CCM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_CCM_RAM1_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM1_Pos) /*!< Bit mask of RAM1 field. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_CCM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_CCM_RAM0_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM0_Pos) /*!< Bit mask of RAM0 field. */ + +/* Register: AMLI_RAMPRI_AAR */ +/* Description: Configurable priority configuration register for AAR. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_AAR_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_AAR_RAM3_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM3_Pos) /*!< Bit mask of RAM3 field. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_AAR_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_AAR_RAM2_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM2_Pos) /*!< Bit mask of RAM2 field. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_AAR_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_AAR_RAM1_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM1_Pos) /*!< Bit mask of RAM1 field. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_AAR_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_AAR_RAM0_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM0_Pos) /*!< Bit mask of RAM0 field. */ + +/* Peripheral: CCM */ +/* Description: AES CCM Mode Encryption. */ + +/* Register: CCM_SHORTS */ +/* Description: Shortcut for the CCM. */ + +/* Bit 0 : Short-cut between ENDKSGEN event and CRYPT task. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Pos (0UL) /*!< Position of ENDKSGEN_CRYPT field. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Msk (0x1UL << CCM_SHORTS_ENDKSGEN_CRYPT_Pos) /*!< Bit mask of ENDKSGEN_CRYPT field. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Disabled (0UL) /*!< Shortcut disabled. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: CCM_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on ERROR event. */ +#define CCM_INTENSET_ERROR_Pos (2UL) /*!< Position of ERROR field. */ +#define CCM_INTENSET_ERROR_Msk (0x1UL << CCM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define CCM_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on ENDCRYPT event. */ +#define CCM_INTENSET_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ +#define CCM_INTENSET_ENDCRYPT_Msk (0x1UL << CCM_INTENSET_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ +#define CCM_INTENSET_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ENDCRYPT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on ENDKSGEN event. */ +#define CCM_INTENSET_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ +#define CCM_INTENSET_ENDKSGEN_Msk (0x1UL << CCM_INTENSET_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ +#define CCM_INTENSET_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ENDKSGEN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: CCM_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on ERROR event. */ +#define CCM_INTENCLR_ERROR_Pos (2UL) /*!< Position of ERROR field. */ +#define CCM_INTENCLR_ERROR_Msk (0x1UL << CCM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define CCM_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on ENDCRYPT event. */ +#define CCM_INTENCLR_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ +#define CCM_INTENCLR_ENDCRYPT_Msk (0x1UL << CCM_INTENCLR_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ +#define CCM_INTENCLR_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ENDCRYPT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDKSGEN event. */ +#define CCM_INTENCLR_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ +#define CCM_INTENCLR_ENDKSGEN_Msk (0x1UL << CCM_INTENCLR_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ +#define CCM_INTENCLR_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ENDKSGEN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: CCM_MICSTATUS */ +/* Description: CCM RX MIC check result. */ + +/* Bit 0 : Result of the MIC check performed during the previous CCM RX STARTCRYPT */ +#define CCM_MICSTATUS_MICSTATUS_Pos (0UL) /*!< Position of MICSTATUS field. */ +#define CCM_MICSTATUS_MICSTATUS_Msk (0x1UL << CCM_MICSTATUS_MICSTATUS_Pos) /*!< Bit mask of MICSTATUS field. */ +#define CCM_MICSTATUS_MICSTATUS_CheckFailed (0UL) /*!< MIC check failed. */ +#define CCM_MICSTATUS_MICSTATUS_CheckPassed (1UL) /*!< MIC check passed. */ + +/* Register: CCM_ENABLE */ +/* Description: CCM enable. */ + +/* Bits 1..0 : CCM enable. */ +#define CCM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define CCM_ENABLE_ENABLE_Msk (0x3UL << CCM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define CCM_ENABLE_ENABLE_Disabled (0x00UL) /*!< CCM is disabled. */ +#define CCM_ENABLE_ENABLE_Enabled (0x02UL) /*!< CCM is enabled. */ + +/* Register: CCM_MODE */ +/* Description: Operation mode. */ + +/* Bit 0 : CCM mode operation. */ +#define CCM_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define CCM_MODE_MODE_Msk (0x1UL << CCM_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ +#define CCM_MODE_MODE_Encryption (0UL) /*!< CCM mode TX */ +#define CCM_MODE_MODE_Decryption (1UL) /*!< CCM mode TX */ + +/* Register: CCM_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define CCM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define CCM_POWER_POWER_Msk (0x1UL << CCM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define CCM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define CCM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: CLOCK */ +/* Description: Clock control. */ + +/* Register: CLOCK_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 4 : Enable interrupt on CTTO event. */ +#define CLOCK_INTENSET_CTTO_Pos (4UL) /*!< Position of CTTO field. */ +#define CLOCK_INTENSET_CTTO_Msk (0x1UL << CLOCK_INTENSET_CTTO_Pos) /*!< Bit mask of CTTO field. */ +#define CLOCK_INTENSET_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_CTTO_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 3 : Enable interrupt on DONE event. */ +#define CLOCK_INTENSET_DONE_Pos (3UL) /*!< Position of DONE field. */ +#define CLOCK_INTENSET_DONE_Msk (0x1UL << CLOCK_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */ +#define CLOCK_INTENSET_DONE_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_DONE_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_DONE_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on LFCLKSTARTED event. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on HFCLKSTARTED event. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: CLOCK_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 4 : Disable interrupt on CTTO event. */ +#define CLOCK_INTENCLR_CTTO_Pos (4UL) /*!< Position of CTTO field. */ +#define CLOCK_INTENCLR_CTTO_Msk (0x1UL << CLOCK_INTENCLR_CTTO_Pos) /*!< Bit mask of CTTO field. */ +#define CLOCK_INTENCLR_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_CTTO_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 3 : Disable interrupt on DONE event. */ +#define CLOCK_INTENCLR_DONE_Pos (3UL) /*!< Position of DONE field. */ +#define CLOCK_INTENCLR_DONE_Msk (0x1UL << CLOCK_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */ +#define CLOCK_INTENCLR_DONE_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_DONE_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_DONE_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on LFCLKSTARTED event. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on HFCLKSTARTED event. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: CLOCK_HFCLKSTAT */ +/* Description: High frequency clock status. */ + +/* Bit 16 : State for the HFCLK. */ +#define CLOCK_HFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ +#define CLOCK_HFCLKSTAT_STATE_Msk (0x1UL << CLOCK_HFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ +#define CLOCK_HFCLKSTAT_STATE_NotRunning (0UL) /*!< HFCLK clock not running. */ +#define CLOCK_HFCLKSTAT_STATE_Running (1UL) /*!< HFCLK clock running. */ + +/* Bit 0 : Active clock source for the HF clock. */ +#define CLOCK_HFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_HFCLKSTAT_SRC_Msk (0x1UL << CLOCK_HFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_HFCLKSTAT_SRC_RC (0UL) /*!< Internal 16MHz RC oscillator running and generating the HFCLK clock. */ +#define CLOCK_HFCLKSTAT_SRC_Xtal (1UL) /*!< External 16MHz/32MHz crystal oscillator running and generating the HFCLK clock. */ + +/* Register: CLOCK_LFCLKSTAT */ +/* Description: Low frequency clock status. */ + +/* Bit 16 : State for the LF clock. */ +#define CLOCK_LFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ +#define CLOCK_LFCLKSTAT_STATE_Msk (0x1UL << CLOCK_LFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ +#define CLOCK_LFCLKSTAT_STATE_NotRunning (0UL) /*!< LFCLK clock not running. */ +#define CLOCK_LFCLKSTAT_STATE_Running (1UL) /*!< LFCLK clock running. */ + +/* Bits 1..0 : Active clock source for the LF clock. */ +#define CLOCK_LFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_LFCLKSTAT_SRC_Msk (0x3UL << CLOCK_LFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_LFCLKSTAT_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator running and generating the LFCLK clock. */ +#define CLOCK_LFCLKSTAT_SRC_Xtal (1UL) /*!< External 32KiHz crystal oscillator running and generating the LFCLK clock. */ +#define CLOCK_LFCLKSTAT_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from the HFCLK running and generating the LFCLK clock. */ + +/* Register: CLOCK_LFCLKSRC */ +/* Description: Clock source for the LFCLK clock. */ + +/* Bits 1..0 : Clock source. */ +#define CLOCK_LFCLKSRC_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_LFCLKSRC_SRC_Msk (0x3UL << CLOCK_LFCLKSRC_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_LFCLKSRC_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ +#define CLOCK_LFCLKSRC_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ +#define CLOCK_LFCLKSRC_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ + +/* Register: CLOCK_CTIV */ +/* Description: Calibration timer interval. */ + +/* Bits 6..0 : Calibration timer interval in 0.25s resolution. */ +#define CLOCK_CTIV_CTIV_Pos (0UL) /*!< Position of CTIV field. */ +#define CLOCK_CTIV_CTIV_Msk (0x7FUL << CLOCK_CTIV_CTIV_Pos) /*!< Bit mask of CTIV field. */ + +/* Register: CLOCK_XTALFREQ */ +/* Description: Crystal frequency. */ + +/* Bits 7..0 : External Xtal frequency selection. */ +#define CLOCK_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ +#define CLOCK_XTALFREQ_XTALFREQ_Msk (0xFFUL << CLOCK_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ +#define CLOCK_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz xtal is used. */ +#define CLOCK_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz xtal is used. */ + + +/* Peripheral: COMP */ +/* Description: Comparator. */ + +/* Register: COMP_SHORTS */ +/* Description: Shortcut for the COMP. */ + +/* Bit 4 : Short-cut between CROSS event and STOP task. */ +#define COMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */ +#define COMP_SHORTS_CROSS_STOP_Msk (0x1UL << COMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */ +#define COMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define COMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Short-cut between UP event and STOP task. */ +#define COMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */ +#define COMP_SHORTS_UP_STOP_Msk (0x1UL << COMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */ +#define COMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define COMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Short-cut between DOWN event and STOP task. */ +#define COMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */ +#define COMP_SHORTS_DOWN_STOP_Msk (0x1UL << COMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */ +#define COMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define COMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Short-cut between RADY event and STOP task. */ +#define COMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */ +#define COMP_SHORTS_READY_STOP_Msk (0x1UL << COMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */ +#define COMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define COMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Short-cut between READY event and SAMPLE task. */ +#define COMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */ +#define COMP_SHORTS_READY_SAMPLE_Msk (0x1UL << COMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */ +#define COMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Shortcut disabled. */ +#define COMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: COMP_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 3 : Enable interrupt on CROSS event. */ +#define COMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */ +#define COMP_INTENSET_CROSS_Msk (0x1UL << COMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */ +#define COMP_INTENSET_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENSET_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENSET_CROSS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on UP event. */ +#define COMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */ +#define COMP_INTENSET_UP_Msk (0x1UL << COMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */ +#define COMP_INTENSET_UP_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENSET_UP_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENSET_UP_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on DOWN event. */ +#define COMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */ +#define COMP_INTENSET_DOWN_Msk (0x1UL << COMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */ +#define COMP_INTENSET_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENSET_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENSET_DOWN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on READY event. */ +#define COMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ +#define COMP_INTENSET_READY_Msk (0x1UL << COMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define COMP_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: COMP_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 3 : Disable interrupt on CROSS event. */ +#define COMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */ +#define COMP_INTENCLR_CROSS_Msk (0x1UL << COMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */ +#define COMP_INTENCLR_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENCLR_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on UP event. */ +#define COMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */ +#define COMP_INTENCLR_UP_Msk (0x1UL << COMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */ +#define COMP_INTENCLR_UP_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENCLR_UP_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENCLR_UP_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on DOWN event. */ +#define COMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */ +#define COMP_INTENCLR_DOWN_Msk (0x1UL << COMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */ +#define COMP_INTENCLR_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENCLR_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on READY event. */ +#define COMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ +#define COMP_INTENCLR_READY_Msk (0x1UL << COMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define COMP_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: COMP_RESULT */ +/* Description: Compare result. */ + +/* Bit 0 : Result of last compare. Decision point SAMPLE task. */ +#define COMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ +#define COMP_RESULT_RESULT_Msk (0x1UL << COMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ +#define COMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is bellow the reference threshold. */ +#define COMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */ + +/* Register: COMP_ENABLE */ +/* Description: Enable the COMP. */ + +/* Bits 1..0 : Enable or disable COMP. */ +#define COMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define COMP_ENABLE_ENABLE_Msk (0x3UL << COMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define COMP_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled COMP. */ +#define COMP_ENABLE_ENABLE_Enabled (0x02UL) /*!< Enable COMP. */ + +/* Register: COMP_PSEL */ +/* Description: Input pin select. */ + +/* Bits 2..0 : Analog input pin select. */ +#define COMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */ +#define COMP_PSEL_PSEL_Msk (0x7UL << COMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */ +#define COMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */ + +/* Register: COMP_REFSEL */ +/* Description: Reference select. */ + +/* Bits 2..0 : Reference select. */ +#define COMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */ +#define COMP_REFSEL_REFSEL_Msk (0x7UL << COMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ +#define COMP_REFSEL_REFSEL_Int1V5 (0UL) /*!< Use internal 1V5 as reference. */ +#define COMP_REFSEL_REFSEL_Int2V0 (1UL) /*!< Use internal 2V0 as reference. */ +#define COMP_REFSEL_REFSEL_Int2V5 (2UL) /*!< Use internal 2V5 as reference. */ +#define COMP_REFSEL_REFSEL_Supply (4UL) /*!< Use supply as reference. */ +#define COMP_REFSEL_REFSEL_ARef (5UL) /*!< Use external analog reference as reference. */ + +/* Register: COMP_EXTREFSEL */ +/* Description: External reference select. */ + +/* Bit 0 : External analog reference pin selection. */ +#define COMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */ +#define COMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << COMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ +#define COMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use analog reference 0 as reference. */ +#define COMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use analog reference 1 as reference. */ + +/* Register: COMP_TH */ +/* Description: Threshold configuration for hysteresis unit. */ + +/* Bits 13..8 : VDOWN configuration. */ +#define COMP_TH_THDOWN_Pos (8UL) /*!< Position of THDOWN field. */ +#define COMP_TH_THDOWN_Msk (0x3FUL << COMP_TH_THDOWN_Pos) /*!< Bit mask of THDOWN field. */ + +/* Bits 5..0 : VUP configuration. */ +#define COMP_TH_THUP_Pos (0UL) /*!< Position of THUP field. */ +#define COMP_TH_THUP_Msk (0x3FUL << COMP_TH_THUP_Pos) /*!< Bit mask of THUP field. */ + +/* Register: COMP_MODE */ +/* Description: Mode configuration. */ + +/* Bit 8 : Main operation mode. */ +#define COMP_MODE_MAIN_Pos (8UL) /*!< Position of MAIN field. */ +#define COMP_MODE_MAIN_Msk (0x1UL << COMP_MODE_MAIN_Pos) /*!< Bit mask of MAIN field. */ +#define COMP_MODE_MAIN_Single (0UL) /*!< Single ended mode. */ +#define COMP_MODE_MAIN_Diff (1UL) /*!< Differential mode. */ + +/* Bits 1..0 : Speed and power mode. */ +#define COMP_MODE_SP_Pos (0UL) /*!< Position of SP field. */ +#define COMP_MODE_SP_Msk (0x3UL << COMP_MODE_SP_Pos) /*!< Bit mask of SP field. */ +#define COMP_MODE_SP_Low (0UL) /*!< Low power mode. */ +#define COMP_MODE_SP_Normal (1UL) /*!< Normal mode. */ +#define COMP_MODE_SP_High (2UL) /*!< High speed mode. */ + +/* Register: COMP_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define COMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define COMP_POWER_POWER_Msk (0x1UL << COMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define COMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define COMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: ECB */ +/* Description: AES ECB Mode Encryption. */ + +/* Register: ECB_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 1 : Enable interrupt on ERRORECB event. */ +#define ECB_INTENSET_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ +#define ECB_INTENSET_ERRORECB_Msk (0x1UL << ECB_INTENSET_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ +#define ECB_INTENSET_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENSET_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENSET_ERRORECB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on ENDECB event. */ +#define ECB_INTENSET_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ +#define ECB_INTENSET_ENDECB_Msk (0x1UL << ECB_INTENSET_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ +#define ECB_INTENSET_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENSET_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENSET_ENDECB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: ECB_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 1 : Disable interrupt on ERRORECB event. */ +#define ECB_INTENCLR_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ +#define ECB_INTENCLR_ERRORECB_Msk (0x1UL << ECB_INTENCLR_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ +#define ECB_INTENCLR_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENCLR_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENCLR_ERRORECB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDECB event. */ +#define ECB_INTENCLR_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ +#define ECB_INTENCLR_ENDECB_Msk (0x1UL << ECB_INTENCLR_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ +#define ECB_INTENCLR_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENCLR_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENCLR_ENDECB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: ECB_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define ECB_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define ECB_POWER_POWER_Msk (0x1UL << ECB_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define ECB_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define ECB_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: FICR */ +/* Description: Factory Information Configuration. */ + +/* Register: FICR_PPFC */ +/* Description: Pre-programmed factory code present. */ + +/* Bits 7..0 : Pre-programmed factory code present. */ +#define FICR_PPFC_PPFC_Pos (0UL) /*!< Position of PPFC field. */ +#define FICR_PPFC_PPFC_Msk (0xFFUL << FICR_PPFC_PPFC_Pos) /*!< Bit mask of PPFC field. */ +#define FICR_PPFC_PPFC_NotPresent (0xFFUL) /*!< Not present. */ +#define FICR_PPFC_PPFC_Present (0x00UL) /*!< Present. */ + +/* Register: FICR_CONFIGID */ +/* Description: Configuration identifier. */ + +/* Bits 31..16 : Firmware Identification Number pre-loaded into the flash. */ +#define FICR_CONFIGID_FWID_Pos (16UL) /*!< Position of FWID field. */ +#define FICR_CONFIGID_FWID_Msk (0xFFFFUL << FICR_CONFIGID_FWID_Pos) /*!< Bit mask of FWID field. */ + +/* Bits 15..0 : Hardware Identification Number. */ +#define FICR_CONFIGID_HWID_Pos (0UL) /*!< Position of HWID field. */ +#define FICR_CONFIGID_HWID_Msk (0xFFFFUL << FICR_CONFIGID_HWID_Pos) /*!< Bit mask of HWID field. */ + +/* Register: FICR_DEVICEADDRTYPE */ +/* Description: Device address type. */ + +/* Bit 0 : Device address type. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos (0UL) /*!< Position of DEVICEADDRTYPE field. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Msk (0x1UL << FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos) /*!< Bit mask of DEVICEADDRTYPE field. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Public (0UL) /*!< Public address. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Random (1UL) /*!< Random address. */ + +/* Register: FICR_OVERRIDEEN */ +/* Description: Radio calibration override enable. */ + +/* Bit 3 : Override default values for BLE_1Mbit mode. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Pos (3UL) /*!< Position of BLE_1MBIT field. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_BLE_1MBIT_Pos) /*!< Bit mask of BLE_1MBIT field. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Override (0UL) /*!< Override the default values for BLE_1Mbit mode. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_NotOverride (1UL) /*!< Do not override the default values for BLE_1Mbit mode. */ + + +/* Peripheral: GPIO */ +/* Description: General purpose input and output. */ + +/* Register: GPIO_OUT */ +/* Description: Write GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUT_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUT_PIN31_Msk (0x1UL << GPIO_OUT_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUT_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUT_PIN30_Msk (0x1UL << GPIO_OUT_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUT_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUT_PIN29_Msk (0x1UL << GPIO_OUT_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUT_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUT_PIN28_Msk (0x1UL << GPIO_OUT_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUT_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUT_PIN27_Msk (0x1UL << GPIO_OUT_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUT_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUT_PIN26_Msk (0x1UL << GPIO_OUT_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUT_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUT_PIN25_Msk (0x1UL << GPIO_OUT_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUT_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUT_PIN24_Msk (0x1UL << GPIO_OUT_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUT_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUT_PIN23_Msk (0x1UL << GPIO_OUT_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUT_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUT_PIN22_Msk (0x1UL << GPIO_OUT_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUT_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUT_PIN21_Msk (0x1UL << GPIO_OUT_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUT_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUT_PIN20_Msk (0x1UL << GPIO_OUT_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUT_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUT_PIN19_Msk (0x1UL << GPIO_OUT_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUT_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUT_PIN18_Msk (0x1UL << GPIO_OUT_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUT_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUT_PIN17_Msk (0x1UL << GPIO_OUT_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUT_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUT_PIN16_Msk (0x1UL << GPIO_OUT_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUT_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUT_PIN15_Msk (0x1UL << GPIO_OUT_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUT_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUT_PIN14_Msk (0x1UL << GPIO_OUT_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUT_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUT_PIN13_Msk (0x1UL << GPIO_OUT_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUT_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUT_PIN12_Msk (0x1UL << GPIO_OUT_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUT_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUT_PIN11_Msk (0x1UL << GPIO_OUT_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_OUT_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_OUT_PIN10_Msk (0x1UL << GPIO_OUT_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_OUT_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_OUT_PIN9_Msk (0x1UL << GPIO_OUT_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_OUT_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_OUT_PIN8_Msk (0x1UL << GPIO_OUT_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_OUT_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_OUT_PIN7_Msk (0x1UL << GPIO_OUT_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_OUT_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_OUT_PIN6_Msk (0x1UL << GPIO_OUT_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_OUT_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_OUT_PIN5_Msk (0x1UL << GPIO_OUT_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_OUT_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_OUT_PIN4_Msk (0x1UL << GPIO_OUT_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_OUT_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_OUT_PIN3_Msk (0x1UL << GPIO_OUT_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_OUT_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_OUT_PIN2_Msk (0x1UL << GPIO_OUT_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_OUT_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_OUT_PIN1_Msk (0x1UL << GPIO_OUT_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_OUT_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_OUT_PIN0_Msk (0x1UL << GPIO_OUT_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */ + +/* Register: GPIO_OUTSET */ +/* Description: Set individual bits in GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUTSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUTSET_PIN31_Msk (0x1UL << GPIO_OUTSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUTSET_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUTSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUTSET_PIN30_Msk (0x1UL << GPIO_OUTSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUTSET_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUTSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUTSET_PIN29_Msk (0x1UL << GPIO_OUTSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUTSET_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUTSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUTSET_PIN28_Msk (0x1UL << GPIO_OUTSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUTSET_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUTSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUTSET_PIN27_Msk (0x1UL << GPIO_OUTSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUTSET_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUTSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUTSET_PIN26_Msk (0x1UL << GPIO_OUTSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUTSET_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUTSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUTSET_PIN25_Msk (0x1UL << GPIO_OUTSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUTSET_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUTSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUTSET_PIN24_Msk (0x1UL << GPIO_OUTSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUTSET_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUTSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUTSET_PIN23_Msk (0x1UL << GPIO_OUTSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUTSET_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUTSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUTSET_PIN22_Msk (0x1UL << GPIO_OUTSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUTSET_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUTSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUTSET_PIN21_Msk (0x1UL << GPIO_OUTSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUTSET_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUTSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUTSET_PIN20_Msk (0x1UL << GPIO_OUTSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUTSET_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUTSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUTSET_PIN19_Msk (0x1UL << GPIO_OUTSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUTSET_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUTSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUTSET_PIN18_Msk (0x1UL << GPIO_OUTSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUTSET_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUTSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUTSET_PIN17_Msk (0x1UL << GPIO_OUTSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUTSET_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUTSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUTSET_PIN16_Msk (0x1UL << GPIO_OUTSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUTSET_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUTSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUTSET_PIN15_Msk (0x1UL << GPIO_OUTSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUTSET_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUTSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUTSET_PIN14_Msk (0x1UL << GPIO_OUTSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUTSET_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUTSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUTSET_PIN13_Msk (0x1UL << GPIO_OUTSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUTSET_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUTSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUTSET_PIN12_Msk (0x1UL << GPIO_OUTSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUTSET_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUTSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUTSET_PIN11_Msk (0x1UL << GPIO_OUTSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_OUTSET_PIN11_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN11_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN11_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_OUTSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_OUTSET_PIN10_Msk (0x1UL << GPIO_OUTSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_OUTSET_PIN10_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN10_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN10_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_OUTSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_OUTSET_PIN9_Msk (0x1UL << GPIO_OUTSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_OUTSET_PIN9_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN9_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN9_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_OUTSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_OUTSET_PIN8_Msk (0x1UL << GPIO_OUTSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_OUTSET_PIN8_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN8_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN8_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_OUTSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_OUTSET_PIN7_Msk (0x1UL << GPIO_OUTSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_OUTSET_PIN7_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN7_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN7_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_OUTSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_OUTSET_PIN6_Msk (0x1UL << GPIO_OUTSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_OUTSET_PIN6_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN6_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN6_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_OUTSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_OUTSET_PIN5_Msk (0x1UL << GPIO_OUTSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_OUTSET_PIN5_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN5_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN5_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_OUTSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_OUTSET_PIN4_Msk (0x1UL << GPIO_OUTSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_OUTSET_PIN4_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN4_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN4_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_OUTSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_OUTSET_PIN3_Msk (0x1UL << GPIO_OUTSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_OUTSET_PIN3_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN3_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN3_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_OUTSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_OUTSET_PIN2_Msk (0x1UL << GPIO_OUTSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_OUTSET_PIN2_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN2_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN2_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_OUTSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_OUTSET_PIN1_Msk (0x1UL << GPIO_OUTSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_OUTSET_PIN1_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN1_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN1_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_OUTSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_OUTSET_PIN0_Msk (0x1UL << GPIO_OUTSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_OUTSET_PIN0_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN0_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN0_Set (1UL) /*!< Set pin driver high. */ + +/* Register: GPIO_OUTCLR */ +/* Description: Clear individual bits in GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUTCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUTCLR_PIN31_Msk (0x1UL << GPIO_OUTCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUTCLR_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN31_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN31_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUTCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUTCLR_PIN30_Msk (0x1UL << GPIO_OUTCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUTCLR_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN30_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN30_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUTCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUTCLR_PIN29_Msk (0x1UL << GPIO_OUTCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUTCLR_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN29_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN29_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUTCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUTCLR_PIN28_Msk (0x1UL << GPIO_OUTCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUTCLR_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN28_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN28_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUTCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUTCLR_PIN27_Msk (0x1UL << GPIO_OUTCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUTCLR_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN27_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN27_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUTCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUTCLR_PIN26_Msk (0x1UL << GPIO_OUTCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUTCLR_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN26_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN26_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUTCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUTCLR_PIN25_Msk (0x1UL << GPIO_OUTCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUTCLR_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN25_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN25_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUTCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUTCLR_PIN24_Msk (0x1UL << GPIO_OUTCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUTCLR_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN24_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN24_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUTCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUTCLR_PIN23_Msk (0x1UL << GPIO_OUTCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUTCLR_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN23_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN23_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUTCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUTCLR_PIN22_Msk (0x1UL << GPIO_OUTCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUTCLR_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN22_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN22_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUTCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUTCLR_PIN21_Msk (0x1UL << GPIO_OUTCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUTCLR_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN21_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN21_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUTCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUTCLR_PIN20_Msk (0x1UL << GPIO_OUTCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUTCLR_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN20_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN20_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUTCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUTCLR_PIN19_Msk (0x1UL << GPIO_OUTCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUTCLR_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN19_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN19_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUTCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUTCLR_PIN18_Msk (0x1UL << GPIO_OUTCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUTCLR_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN18_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN18_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUTCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUTCLR_PIN17_Msk (0x1UL << GPIO_OUTCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUTCLR_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN17_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN17_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUTCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUTCLR_PIN16_Msk (0x1UL << GPIO_OUTCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUTCLR_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN16_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN16_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUTCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUTCLR_PIN15_Msk (0x1UL << GPIO_OUTCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUTCLR_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN15_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN15_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUTCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUTCLR_PIN14_Msk (0x1UL << GPIO_OUTCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUTCLR_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN14_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN14_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUTCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUTCLR_PIN13_Msk (0x1UL << GPIO_OUTCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUTCLR_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN13_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN13_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUTCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUTCLR_PIN12_Msk (0x1UL << GPIO_OUTCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUTCLR_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN12_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN12_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUTCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUTCLR_PIN11_Msk (0x1UL << GPIO_OUTCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_OUTCLR_PIN11_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN11_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN11_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_OUTCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_OUTCLR_PIN10_Msk (0x1UL << GPIO_OUTCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_OUTCLR_PIN10_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN10_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN10_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_OUTCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_OUTCLR_PIN9_Msk (0x1UL << GPIO_OUTCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_OUTCLR_PIN9_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN9_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN9_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_OUTCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_OUTCLR_PIN8_Msk (0x1UL << GPIO_OUTCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_OUTCLR_PIN8_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN8_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN8_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_OUTCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_OUTCLR_PIN7_Msk (0x1UL << GPIO_OUTCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_OUTCLR_PIN7_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN7_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN7_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_OUTCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_OUTCLR_PIN6_Msk (0x1UL << GPIO_OUTCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_OUTCLR_PIN6_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN6_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN6_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_OUTCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_OUTCLR_PIN5_Msk (0x1UL << GPIO_OUTCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_OUTCLR_PIN5_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN5_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN5_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_OUTCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_OUTCLR_PIN4_Msk (0x1UL << GPIO_OUTCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_OUTCLR_PIN4_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN4_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN4_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_OUTCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_OUTCLR_PIN3_Msk (0x1UL << GPIO_OUTCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_OUTCLR_PIN3_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN3_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN3_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_OUTCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_OUTCLR_PIN2_Msk (0x1UL << GPIO_OUTCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_OUTCLR_PIN2_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN2_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN2_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_OUTCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_OUTCLR_PIN1_Msk (0x1UL << GPIO_OUTCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_OUTCLR_PIN1_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN1_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN1_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_OUTCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_OUTCLR_PIN0_Msk (0x1UL << GPIO_OUTCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_OUTCLR_PIN0_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN0_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN0_Clear (1UL) /*!< Set pin driver low. */ + +/* Register: GPIO_IN */ +/* Description: Read GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_IN_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_IN_PIN31_Msk (0x1UL << GPIO_IN_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_IN_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_IN_PIN30_Msk (0x1UL << GPIO_IN_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_IN_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_IN_PIN29_Msk (0x1UL << GPIO_IN_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_IN_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_IN_PIN28_Msk (0x1UL << GPIO_IN_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_IN_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_IN_PIN27_Msk (0x1UL << GPIO_IN_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_IN_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_IN_PIN26_Msk (0x1UL << GPIO_IN_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_IN_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_IN_PIN25_Msk (0x1UL << GPIO_IN_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_IN_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_IN_PIN24_Msk (0x1UL << GPIO_IN_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_IN_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_IN_PIN23_Msk (0x1UL << GPIO_IN_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_IN_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_IN_PIN22_Msk (0x1UL << GPIO_IN_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_IN_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_IN_PIN21_Msk (0x1UL << GPIO_IN_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_IN_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_IN_PIN20_Msk (0x1UL << GPIO_IN_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_IN_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_IN_PIN19_Msk (0x1UL << GPIO_IN_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_IN_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_IN_PIN18_Msk (0x1UL << GPIO_IN_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_IN_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_IN_PIN17_Msk (0x1UL << GPIO_IN_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_IN_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_IN_PIN16_Msk (0x1UL << GPIO_IN_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_IN_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_IN_PIN15_Msk (0x1UL << GPIO_IN_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_IN_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_IN_PIN14_Msk (0x1UL << GPIO_IN_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_IN_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_IN_PIN13_Msk (0x1UL << GPIO_IN_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_IN_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_IN_PIN12_Msk (0x1UL << GPIO_IN_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_IN_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_IN_PIN11_Msk (0x1UL << GPIO_IN_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_IN_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_IN_PIN10_Msk (0x1UL << GPIO_IN_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_IN_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_IN_PIN9_Msk (0x1UL << GPIO_IN_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_IN_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_IN_PIN8_Msk (0x1UL << GPIO_IN_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_IN_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_IN_PIN7_Msk (0x1UL << GPIO_IN_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_IN_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_IN_PIN6_Msk (0x1UL << GPIO_IN_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_IN_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_IN_PIN5_Msk (0x1UL << GPIO_IN_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_IN_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_IN_PIN4_Msk (0x1UL << GPIO_IN_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_IN_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_IN_PIN3_Msk (0x1UL << GPIO_IN_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_IN_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_IN_PIN2_Msk (0x1UL << GPIO_IN_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_IN_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_IN_PIN1_Msk (0x1UL << GPIO_IN_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_IN_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_IN_PIN0_Msk (0x1UL << GPIO_IN_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */ + +/* Register: GPIO_DIR */ +/* Description: Direction of GPIO pins. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_DIR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_DIR_PIN31_Msk (0x1UL << GPIO_DIR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN31_Output (1UL) /*!< Pin set as output. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_DIR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_DIR_PIN30_Msk (0x1UL << GPIO_DIR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN30_Output (1UL) /*!< Pin set as output. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_DIR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_DIR_PIN29_Msk (0x1UL << GPIO_DIR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN29_Output (1UL) /*!< Pin set as output. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_DIR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_DIR_PIN28_Msk (0x1UL << GPIO_DIR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN28_Output (1UL) /*!< Pin set as output. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_DIR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_DIR_PIN27_Msk (0x1UL << GPIO_DIR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN27_Output (1UL) /*!< Pin set as output. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_DIR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_DIR_PIN26_Msk (0x1UL << GPIO_DIR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN26_Output (1UL) /*!< Pin set as output. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_DIR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_DIR_PIN25_Msk (0x1UL << GPIO_DIR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN25_Output (1UL) /*!< Pin set as output. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_DIR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_DIR_PIN24_Msk (0x1UL << GPIO_DIR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN24_Output (1UL) /*!< Pin set as output. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_DIR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_DIR_PIN23_Msk (0x1UL << GPIO_DIR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN23_Output (1UL) /*!< Pin set as output. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_DIR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_DIR_PIN22_Msk (0x1UL << GPIO_DIR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN22_Output (1UL) /*!< Pin set as output. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_DIR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_DIR_PIN21_Msk (0x1UL << GPIO_DIR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN21_Output (1UL) /*!< Pin set as output. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_DIR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_DIR_PIN20_Msk (0x1UL << GPIO_DIR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN20_Output (1UL) /*!< Pin set as output. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_DIR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_DIR_PIN19_Msk (0x1UL << GPIO_DIR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN19_Output (1UL) /*!< Pin set as output. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_DIR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_DIR_PIN18_Msk (0x1UL << GPIO_DIR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN18_Output (1UL) /*!< Pin set as output. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_DIR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_DIR_PIN17_Msk (0x1UL << GPIO_DIR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN17_Output (1UL) /*!< Pin set as output. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_DIR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_DIR_PIN16_Msk (0x1UL << GPIO_DIR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN16_Output (1UL) /*!< Pin set as output. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_DIR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_DIR_PIN15_Msk (0x1UL << GPIO_DIR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN15_Output (1UL) /*!< Pin set as output. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_DIR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_DIR_PIN14_Msk (0x1UL << GPIO_DIR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN14_Output (1UL) /*!< Pin set as output. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_DIR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_DIR_PIN13_Msk (0x1UL << GPIO_DIR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN13_Output (1UL) /*!< Pin set as output. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_DIR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_DIR_PIN12_Msk (0x1UL << GPIO_DIR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN12_Output (1UL) /*!< Pin set as output. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_DIR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_DIR_PIN11_Msk (0x1UL << GPIO_DIR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN11_Output (1UL) /*!< Pin set as output. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_DIR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_DIR_PIN10_Msk (0x1UL << GPIO_DIR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN10_Output (1UL) /*!< Pin set as output. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_DIR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_DIR_PIN9_Msk (0x1UL << GPIO_DIR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN9_Output (1UL) /*!< Pin set as output. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_DIR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_DIR_PIN8_Msk (0x1UL << GPIO_DIR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN8_Output (1UL) /*!< Pin set as output. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_DIR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_DIR_PIN7_Msk (0x1UL << GPIO_DIR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN7_Output (1UL) /*!< Pin set as output. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_DIR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_DIR_PIN6_Msk (0x1UL << GPIO_DIR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN6_Output (1UL) /*!< Pin set as output. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_DIR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_DIR_PIN5_Msk (0x1UL << GPIO_DIR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN5_Output (1UL) /*!< Pin set as output. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_DIR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_DIR_PIN4_Msk (0x1UL << GPIO_DIR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN4_Output (1UL) /*!< Pin set as output. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_DIR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_DIR_PIN3_Msk (0x1UL << GPIO_DIR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN3_Output (1UL) /*!< Pin set as output. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_DIR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_DIR_PIN2_Msk (0x1UL << GPIO_DIR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN2_Output (1UL) /*!< Pin set as output. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_DIR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_DIR_PIN1_Msk (0x1UL << GPIO_DIR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN1_Output (1UL) /*!< Pin set as output. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_DIR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_DIR_PIN0_Msk (0x1UL << GPIO_DIR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN0_Output (1UL) /*!< Pin set as output. */ + +/* Register: GPIO_DIRSET */ +/* Description: DIR set register. */ + +/* Bit 31 : Set as output pin 31. */ +#define GPIO_DIRSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_DIRSET_PIN31_Msk (0x1UL << GPIO_DIRSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_DIRSET_PIN31_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN31_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN31_Set (1UL) /*!< Set pin as output. */ + +/* Bit 30 : Set as output pin 30. */ +#define GPIO_DIRSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_DIRSET_PIN30_Msk (0x1UL << GPIO_DIRSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_DIRSET_PIN30_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN30_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN30_Set (1UL) /*!< Set pin as output. */ + +/* Bit 29 : Set as output pin 29. */ +#define GPIO_DIRSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_DIRSET_PIN29_Msk (0x1UL << GPIO_DIRSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_DIRSET_PIN29_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN29_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN29_Set (1UL) /*!< Set pin as output. */ + +/* Bit 28 : Set as output pin 28. */ +#define GPIO_DIRSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_DIRSET_PIN28_Msk (0x1UL << GPIO_DIRSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_DIRSET_PIN28_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN28_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN28_Set (1UL) /*!< Set pin as output. */ + +/* Bit 27 : Set as output pin 27. */ +#define GPIO_DIRSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_DIRSET_PIN27_Msk (0x1UL << GPIO_DIRSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_DIRSET_PIN27_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN27_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN27_Set (1UL) /*!< Set pin as output. */ + +/* Bit 26 : Set as output pin 26. */ +#define GPIO_DIRSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_DIRSET_PIN26_Msk (0x1UL << GPIO_DIRSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_DIRSET_PIN26_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN26_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN26_Set (1UL) /*!< Set pin as output. */ + +/* Bit 25 : Set as output pin 25. */ +#define GPIO_DIRSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_DIRSET_PIN25_Msk (0x1UL << GPIO_DIRSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_DIRSET_PIN25_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN25_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN25_Set (1UL) /*!< Set pin as output. */ + +/* Bit 24 : Set as output pin 24. */ +#define GPIO_DIRSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_DIRSET_PIN24_Msk (0x1UL << GPIO_DIRSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_DIRSET_PIN24_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN24_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN24_Set (1UL) /*!< Set pin as output. */ + +/* Bit 23 : Set as output pin 23. */ +#define GPIO_DIRSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_DIRSET_PIN23_Msk (0x1UL << GPIO_DIRSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_DIRSET_PIN23_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN23_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN23_Set (1UL) /*!< Set pin as output. */ + +/* Bit 22 : Set as output pin 22. */ +#define GPIO_DIRSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_DIRSET_PIN22_Msk (0x1UL << GPIO_DIRSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_DIRSET_PIN22_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN22_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN22_Set (1UL) /*!< Set pin as output. */ + +/* Bit 21 : Set as output pin 21. */ +#define GPIO_DIRSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_DIRSET_PIN21_Msk (0x1UL << GPIO_DIRSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_DIRSET_PIN21_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN21_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN21_Set (1UL) /*!< Set pin as output. */ + +/* Bit 20 : Set as output pin 20. */ +#define GPIO_DIRSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_DIRSET_PIN20_Msk (0x1UL << GPIO_DIRSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_DIRSET_PIN20_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN20_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN20_Set (1UL) /*!< Set pin as output. */ + +/* Bit 19 : Set as output pin 19. */ +#define GPIO_DIRSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_DIRSET_PIN19_Msk (0x1UL << GPIO_DIRSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_DIRSET_PIN19_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN19_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN19_Set (1UL) /*!< Set pin as output. */ + +/* Bit 18 : Set as output pin 18. */ +#define GPIO_DIRSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_DIRSET_PIN18_Msk (0x1UL << GPIO_DIRSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_DIRSET_PIN18_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN18_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN18_Set (1UL) /*!< Set pin as output. */ + +/* Bit 17 : Set as output pin 17. */ +#define GPIO_DIRSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_DIRSET_PIN17_Msk (0x1UL << GPIO_DIRSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_DIRSET_PIN17_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN17_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN17_Set (1UL) /*!< Set pin as output. */ + +/* Bit 16 : Set as output pin 16. */ +#define GPIO_DIRSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_DIRSET_PIN16_Msk (0x1UL << GPIO_DIRSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_DIRSET_PIN16_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN16_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN16_Set (1UL) /*!< Set pin as output. */ + +/* Bit 15 : Set as output pin 15. */ +#define GPIO_DIRSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_DIRSET_PIN15_Msk (0x1UL << GPIO_DIRSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_DIRSET_PIN15_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN15_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN15_Set (1UL) /*!< Set pin as output. */ + +/* Bit 14 : Set as output pin 14. */ +#define GPIO_DIRSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_DIRSET_PIN14_Msk (0x1UL << GPIO_DIRSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_DIRSET_PIN14_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN14_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN14_Set (1UL) /*!< Set pin as output. */ + +/* Bit 13 : Set as output pin 13. */ +#define GPIO_DIRSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_DIRSET_PIN13_Msk (0x1UL << GPIO_DIRSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_DIRSET_PIN13_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN13_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN13_Set (1UL) /*!< Set pin as output. */ + +/* Bit 12 : Set as output pin 12. */ +#define GPIO_DIRSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_DIRSET_PIN12_Msk (0x1UL << GPIO_DIRSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_DIRSET_PIN12_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN12_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN12_Set (1UL) /*!< Set pin as output. */ + +/* Bit 11 : Set as output pin 11. */ +#define GPIO_DIRSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_DIRSET_PIN11_Msk (0x1UL << GPIO_DIRSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_DIRSET_PIN11_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN11_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN11_Set (1UL) /*!< Set pin as output. */ + +/* Bit 10 : Set as output pin 10. */ +#define GPIO_DIRSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_DIRSET_PIN10_Msk (0x1UL << GPIO_DIRSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_DIRSET_PIN10_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN10_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN10_Set (1UL) /*!< Set pin as output. */ + +/* Bit 9 : Set as output pin 9. */ +#define GPIO_DIRSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_DIRSET_PIN9_Msk (0x1UL << GPIO_DIRSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_DIRSET_PIN9_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN9_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN9_Set (1UL) /*!< Set pin as output. */ + +/* Bit 8 : Set as output pin 8. */ +#define GPIO_DIRSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_DIRSET_PIN8_Msk (0x1UL << GPIO_DIRSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_DIRSET_PIN8_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN8_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN8_Set (1UL) /*!< Set pin as output. */ + +/* Bit 7 : Set as output pin 7. */ +#define GPIO_DIRSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_DIRSET_PIN7_Msk (0x1UL << GPIO_DIRSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_DIRSET_PIN7_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN7_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN7_Set (1UL) /*!< Set pin as output. */ + +/* Bit 6 : Set as output pin 6. */ +#define GPIO_DIRSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_DIRSET_PIN6_Msk (0x1UL << GPIO_DIRSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_DIRSET_PIN6_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN6_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN6_Set (1UL) /*!< Set pin as output. */ + +/* Bit 5 : Set as output pin 5. */ +#define GPIO_DIRSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_DIRSET_PIN5_Msk (0x1UL << GPIO_DIRSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_DIRSET_PIN5_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN5_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN5_Set (1UL) /*!< Set pin as output. */ + +/* Bit 4 : Set as output pin 4. */ +#define GPIO_DIRSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_DIRSET_PIN4_Msk (0x1UL << GPIO_DIRSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_DIRSET_PIN4_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN4_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN4_Set (1UL) /*!< Set pin as output. */ + +/* Bit 3 : Set as output pin 3. */ +#define GPIO_DIRSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_DIRSET_PIN3_Msk (0x1UL << GPIO_DIRSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_DIRSET_PIN3_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN3_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN3_Set (1UL) /*!< Set pin as output. */ + +/* Bit 2 : Set as output pin 2. */ +#define GPIO_DIRSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_DIRSET_PIN2_Msk (0x1UL << GPIO_DIRSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_DIRSET_PIN2_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN2_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN2_Set (1UL) /*!< Set pin as output. */ + +/* Bit 1 : Set as output pin 1. */ +#define GPIO_DIRSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_DIRSET_PIN1_Msk (0x1UL << GPIO_DIRSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_DIRSET_PIN1_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN1_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN1_Set (1UL) /*!< Set pin as output. */ + +/* Bit 0 : Set as output pin 0. */ +#define GPIO_DIRSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_DIRSET_PIN0_Msk (0x1UL << GPIO_DIRSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_DIRSET_PIN0_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN0_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN0_Set (1UL) /*!< Set pin as output. */ + +/* Register: GPIO_DIRCLR */ +/* Description: DIR clear register. */ + +/* Bit 31 : Set as input pin 31. */ +#define GPIO_DIRCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_DIRCLR_PIN31_Msk (0x1UL << GPIO_DIRCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN31_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 30 : Set as input pin 30. */ +#define GPIO_DIRCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_DIRCLR_PIN30_Msk (0x1UL << GPIO_DIRCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN30_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 29 : Set as input pin 29. */ +#define GPIO_DIRCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_DIRCLR_PIN29_Msk (0x1UL << GPIO_DIRCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN29_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 28 : Set as input pin 28. */ +#define GPIO_DIRCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_DIRCLR_PIN28_Msk (0x1UL << GPIO_DIRCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN28_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 27 : Set as input pin 27. */ +#define GPIO_DIRCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_DIRCLR_PIN27_Msk (0x1UL << GPIO_DIRCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN27_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 26 : Set as input pin 26. */ +#define GPIO_DIRCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_DIRCLR_PIN26_Msk (0x1UL << GPIO_DIRCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN26_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 25 : Set as input pin 25. */ +#define GPIO_DIRCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_DIRCLR_PIN25_Msk (0x1UL << GPIO_DIRCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN25_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 24 : Set as input pin 24. */ +#define GPIO_DIRCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_DIRCLR_PIN24_Msk (0x1UL << GPIO_DIRCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN24_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 23 : Set as input pin 23. */ +#define GPIO_DIRCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_DIRCLR_PIN23_Msk (0x1UL << GPIO_DIRCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN23_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 22 : Set as input pin 22. */ +#define GPIO_DIRCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_DIRCLR_PIN22_Msk (0x1UL << GPIO_DIRCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN22_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 21 : Set as input pin 21. */ +#define GPIO_DIRCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_DIRCLR_PIN21_Msk (0x1UL << GPIO_DIRCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN21_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 20 : Set as input pin 20. */ +#define GPIO_DIRCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_DIRCLR_PIN20_Msk (0x1UL << GPIO_DIRCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN20_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 19 : Set as input pin 19. */ +#define GPIO_DIRCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_DIRCLR_PIN19_Msk (0x1UL << GPIO_DIRCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN19_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 18 : Set as input pin 18. */ +#define GPIO_DIRCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_DIRCLR_PIN18_Msk (0x1UL << GPIO_DIRCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN18_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 17 : Set as input pin 17. */ +#define GPIO_DIRCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_DIRCLR_PIN17_Msk (0x1UL << GPIO_DIRCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN17_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 16 : Set as input pin 16. */ +#define GPIO_DIRCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_DIRCLR_PIN16_Msk (0x1UL << GPIO_DIRCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN16_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 15 : Set as input pin 15. */ +#define GPIO_DIRCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_DIRCLR_PIN15_Msk (0x1UL << GPIO_DIRCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN15_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 14 : Set as input pin 14. */ +#define GPIO_DIRCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_DIRCLR_PIN14_Msk (0x1UL << GPIO_DIRCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN14_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 13 : Set as input pin 13. */ +#define GPIO_DIRCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_DIRCLR_PIN13_Msk (0x1UL << GPIO_DIRCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN13_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 12 : Set as input pin 12. */ +#define GPIO_DIRCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_DIRCLR_PIN12_Msk (0x1UL << GPIO_DIRCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN12_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 11 : Set as input pin 11. */ +#define GPIO_DIRCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_DIRCLR_PIN11_Msk (0x1UL << GPIO_DIRCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN11_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 10 : Set as input pin 10. */ +#define GPIO_DIRCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_DIRCLR_PIN10_Msk (0x1UL << GPIO_DIRCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN10_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 9 : Set as input pin 9. */ +#define GPIO_DIRCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_DIRCLR_PIN9_Msk (0x1UL << GPIO_DIRCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN9_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 8 : Set as input pin 8. */ +#define GPIO_DIRCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_DIRCLR_PIN8_Msk (0x1UL << GPIO_DIRCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN8_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 7 : Set as input pin 7. */ +#define GPIO_DIRCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_DIRCLR_PIN7_Msk (0x1UL << GPIO_DIRCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN7_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 6 : Set as input pin 6. */ +#define GPIO_DIRCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_DIRCLR_PIN6_Msk (0x1UL << GPIO_DIRCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN6_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 5 : Set as input pin 5. */ +#define GPIO_DIRCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_DIRCLR_PIN5_Msk (0x1UL << GPIO_DIRCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN5_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 4 : Set as input pin 4. */ +#define GPIO_DIRCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_DIRCLR_PIN4_Msk (0x1UL << GPIO_DIRCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN4_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 3 : Set as input pin 3. */ +#define GPIO_DIRCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_DIRCLR_PIN3_Msk (0x1UL << GPIO_DIRCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN3_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 2 : Set as input pin 2. */ +#define GPIO_DIRCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_DIRCLR_PIN2_Msk (0x1UL << GPIO_DIRCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN2_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 1 : Set as input pin 1. */ +#define GPIO_DIRCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_DIRCLR_PIN1_Msk (0x1UL << GPIO_DIRCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN1_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 0 : Set as input pin 0. */ +#define GPIO_DIRCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_DIRCLR_PIN0_Msk (0x1UL << GPIO_DIRCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN0_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Set pin as input. */ + +/* Register: GPIO_PIN_CNF */ +/* Description: Configuration of GPIO pins. */ + +/* Bits 17..16 : Pin sensing mechanism. */ +#define GPIO_PIN_CNF_SENSE_Pos (16UL) /*!< Position of SENSE field. */ +#define GPIO_PIN_CNF_SENSE_Msk (0x3UL << GPIO_PIN_CNF_SENSE_Pos) /*!< Bit mask of SENSE field. */ +#define GPIO_PIN_CNF_SENSE_Disabled (0x00UL) /*!< Disabled. */ +#define GPIO_PIN_CNF_SENSE_High (0x02UL) /*!< Wakeup on high level. */ +#define GPIO_PIN_CNF_SENSE_Low (0x03UL) /*!< Wakeup on low level. */ + +/* Bits 10..8 : Drive configuration. */ +#define GPIO_PIN_CNF_DRIVE_Pos (8UL) /*!< Position of DRIVE field. */ +#define GPIO_PIN_CNF_DRIVE_Msk (0x7UL << GPIO_PIN_CNF_DRIVE_Pos) /*!< Bit mask of DRIVE field. */ +#define GPIO_PIN_CNF_DRIVE_S0S1 (0x00UL) /*!< Standard '0', Standard '1'. */ +#define GPIO_PIN_CNF_DRIVE_H0S1 (0x01UL) /*!< High '0', Standard '1'. */ +#define GPIO_PIN_CNF_DRIVE_S0H1 (0x02UL) /*!< Standard '0', High '1'. */ +#define GPIO_PIN_CNF_DRIVE_H0H1 (0x03UL) /*!< High '0', High '1'. */ +#define GPIO_PIN_CNF_DRIVE_D0S1 (0x04UL) /*!< Disconnected '0', Standard '1'. */ +#define GPIO_PIN_CNF_DRIVE_D0H1 (0x05UL) /*!< Disconnected '0', High '1'. */ +#define GPIO_PIN_CNF_DRIVE_S0D1 (0x06UL) /*!< Standard '0', Disconnected '1'. */ +#define GPIO_PIN_CNF_DRIVE_H0D1 (0x07UL) /*!< High '0', Disconnected '1'. */ + +/* Bits 3..2 : Pull-up or -down configuration. */ +#define GPIO_PIN_CNF_PULL_Pos (2UL) /*!< Position of PULL field. */ +#define GPIO_PIN_CNF_PULL_Msk (0x3UL << GPIO_PIN_CNF_PULL_Pos) /*!< Bit mask of PULL field. */ +#define GPIO_PIN_CNF_PULL_Disabled (0x00UL) /*!< No pull. */ +#define GPIO_PIN_CNF_PULL_Pulldown (0x01UL) /*!< Pulldown on pin. */ +#define GPIO_PIN_CNF_PULL_Pullup (0x03UL) /*!< Pullup on pin. */ + +/* Bit 1 : Connect or disconnect input path. */ +#define GPIO_PIN_CNF_INPUT_Pos (1UL) /*!< Position of INPUT field. */ +#define GPIO_PIN_CNF_INPUT_Msk (0x1UL << GPIO_PIN_CNF_INPUT_Pos) /*!< Bit mask of INPUT field. */ +#define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input pin. */ +#define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input pin. */ + +/* Bit 0 : Pin direction. */ +#define GPIO_PIN_CNF_DIR_Pos (0UL) /*!< Position of DIR field. */ +#define GPIO_PIN_CNF_DIR_Msk (0x1UL << GPIO_PIN_CNF_DIR_Pos) /*!< Bit mask of DIR field. */ +#define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin. */ +#define GPIO_PIN_CNF_DIR_Output (1UL) /*!< Configure pin as an output pin. */ + + +/* Peripheral: GPIOTE */ +/* Description: GPIO tasks and events. */ + +/* Register: GPIOTE_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 31 : Enable interrupt on PORT event. */ +#define GPIOTE_INTENSET_PORT_Pos (31UL) /*!< Position of PORT field. */ +#define GPIOTE_INTENSET_PORT_Msk (0x1UL << GPIOTE_INTENSET_PORT_Pos) /*!< Bit mask of PORT field. */ +#define GPIOTE_INTENSET_PORT_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_PORT_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_PORT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 3 : Enable interrupt on IN[3] event. */ +#define GPIOTE_INTENSET_IN3_Pos (3UL) /*!< Position of IN3 field. */ +#define GPIOTE_INTENSET_IN3_Msk (0x1UL << GPIOTE_INTENSET_IN3_Pos) /*!< Bit mask of IN3 field. */ +#define GPIOTE_INTENSET_IN3_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN3_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN3_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on IN[2] event. */ +#define GPIOTE_INTENSET_IN2_Pos (2UL) /*!< Position of IN2 field. */ +#define GPIOTE_INTENSET_IN2_Msk (0x1UL << GPIOTE_INTENSET_IN2_Pos) /*!< Bit mask of IN2 field. */ +#define GPIOTE_INTENSET_IN2_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN2_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN2_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on IN[1] event. */ +#define GPIOTE_INTENSET_IN1_Pos (1UL) /*!< Position of IN1 field. */ +#define GPIOTE_INTENSET_IN1_Msk (0x1UL << GPIOTE_INTENSET_IN1_Pos) /*!< Bit mask of IN1 field. */ +#define GPIOTE_INTENSET_IN1_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN1_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN1_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on IN[0] event. */ +#define GPIOTE_INTENSET_IN0_Pos (0UL) /*!< Position of IN0 field. */ +#define GPIOTE_INTENSET_IN0_Msk (0x1UL << GPIOTE_INTENSET_IN0_Pos) /*!< Bit mask of IN0 field. */ +#define GPIOTE_INTENSET_IN0_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN0_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN0_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: GPIOTE_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 31 : Disable interrupt on PORT event. */ +#define GPIOTE_INTENCLR_PORT_Pos (31UL) /*!< Position of PORT field. */ +#define GPIOTE_INTENCLR_PORT_Msk (0x1UL << GPIOTE_INTENCLR_PORT_Pos) /*!< Bit mask of PORT field. */ +#define GPIOTE_INTENCLR_PORT_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_PORT_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_PORT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 3 : Disable interrupt on IN[3] event. */ +#define GPIOTE_INTENCLR_IN3_Pos (3UL) /*!< Position of IN3 field. */ +#define GPIOTE_INTENCLR_IN3_Msk (0x1UL << GPIOTE_INTENCLR_IN3_Pos) /*!< Bit mask of IN3 field. */ +#define GPIOTE_INTENCLR_IN3_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN3_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN3_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on IN[2] event. */ +#define GPIOTE_INTENCLR_IN2_Pos (2UL) /*!< Position of IN2 field. */ +#define GPIOTE_INTENCLR_IN2_Msk (0x1UL << GPIOTE_INTENCLR_IN2_Pos) /*!< Bit mask of IN2 field. */ +#define GPIOTE_INTENCLR_IN2_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN2_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN2_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on IN[1] event. */ +#define GPIOTE_INTENCLR_IN1_Pos (1UL) /*!< Position of IN1 field. */ +#define GPIOTE_INTENCLR_IN1_Msk (0x1UL << GPIOTE_INTENCLR_IN1_Pos) /*!< Bit mask of IN1 field. */ +#define GPIOTE_INTENCLR_IN1_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN1_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN1_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on IN[0] event. */ +#define GPIOTE_INTENCLR_IN0_Pos (0UL) /*!< Position of IN0 field. */ +#define GPIOTE_INTENCLR_IN0_Msk (0x1UL << GPIOTE_INTENCLR_IN0_Pos) /*!< Bit mask of IN0 field. */ +#define GPIOTE_INTENCLR_IN0_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN0_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN0_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: GPIOTE_CONFIG */ +/* Description: Channel configuration registers. */ + +/* Bit 20 : Initial value of the output when the GPIOTE channel is configured as a Task. */ +#define GPIOTE_CONFIG_OUTINIT_Pos (20UL) /*!< Position of OUTINIT field. */ +#define GPIOTE_CONFIG_OUTINIT_Msk (0x1UL << GPIOTE_CONFIG_OUTINIT_Pos) /*!< Bit mask of OUTINIT field. */ +#define GPIOTE_CONFIG_OUTINIT_Low (0UL) /*!< Initial low output when in task mode. */ +#define GPIOTE_CONFIG_OUTINIT_High (1UL) /*!< Initial high output when in task mode. */ + +/* Bits 17..16 : Effects on output when in Task mode, or events on input that generates an event. */ +#define GPIOTE_CONFIG_POLARITY_Pos (16UL) /*!< Position of POLARITY field. */ +#define GPIOTE_CONFIG_POLARITY_Msk (0x3UL << GPIOTE_CONFIG_POLARITY_Pos) /*!< Bit mask of POLARITY field. */ +#define GPIOTE_CONFIG_POLARITY_LoToHi (0x01UL) /*!< Low to high. */ +#define GPIOTE_CONFIG_POLARITY_HiToLo (0x02UL) /*!< High to low. */ +#define GPIOTE_CONFIG_POLARITY_Toggle (0x03UL) /*!< Toggle. */ + +/* Bits 12..8 : Pin select. */ +#define GPIOTE_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ +#define GPIOTE_CONFIG_PSEL_Msk (0x1FUL << GPIOTE_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ + +/* Bits 1..0 : Mode */ +#define GPIOTE_CONFIG_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define GPIOTE_CONFIG_MODE_Msk (0x3UL << GPIOTE_CONFIG_MODE_Pos) /*!< Bit mask of MODE field. */ +#define GPIOTE_CONFIG_MODE_Disabled (0x00UL) /*!< Disabled. */ +#define GPIOTE_CONFIG_MODE_Event (0x01UL) /*!< Channel configure in event mode. */ +#define GPIOTE_CONFIG_MODE_Task (0x03UL) /*!< Channel configure in task mode. */ + +/* Register: GPIOTE_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define GPIOTE_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define GPIOTE_POWER_POWER_Msk (0x1UL << GPIOTE_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define GPIOTE_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define GPIOTE_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: LPCOMP */ +/* Description: Wakeup Comparator. */ + +/* Register: LPCOMP_SHORTS */ +/* Description: Shortcut for the LPCOMP. */ + +/* Bit 4 : Short-cut between CROSS event and STOP task. */ +#define LPCOMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */ +#define LPCOMP_SHORTS_CROSS_STOP_Msk (0x1UL << LPCOMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */ +#define LPCOMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Short-cut between UP event and STOP task. */ +#define LPCOMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */ +#define LPCOMP_SHORTS_UP_STOP_Msk (0x1UL << LPCOMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */ +#define LPCOMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Short-cut between DOWN event and STOP task. */ +#define LPCOMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */ +#define LPCOMP_SHORTS_DOWN_STOP_Msk (0x1UL << LPCOMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */ +#define LPCOMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Short-cut between RADY event and STOP task. */ +#define LPCOMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */ +#define LPCOMP_SHORTS_READY_STOP_Msk (0x1UL << LPCOMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */ +#define LPCOMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Short-cut between READY event and SAMPLE task. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Msk (0x1UL << LPCOMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: LPCOMP_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 3 : Enable interrupt on CROSS event. */ +#define LPCOMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */ +#define LPCOMP_INTENSET_CROSS_Msk (0x1UL << LPCOMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */ +#define LPCOMP_INTENSET_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_CROSS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on UP event. */ +#define LPCOMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */ +#define LPCOMP_INTENSET_UP_Msk (0x1UL << LPCOMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */ +#define LPCOMP_INTENSET_UP_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_UP_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_UP_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on DOWN event. */ +#define LPCOMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */ +#define LPCOMP_INTENSET_DOWN_Msk (0x1UL << LPCOMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */ +#define LPCOMP_INTENSET_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_DOWN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on READY event. */ +#define LPCOMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ +#define LPCOMP_INTENSET_READY_Msk (0x1UL << LPCOMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define LPCOMP_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: LPCOMP_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 3 : Disable interrupt on CROSS event. */ +#define LPCOMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */ +#define LPCOMP_INTENCLR_CROSS_Msk (0x1UL << LPCOMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */ +#define LPCOMP_INTENCLR_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on UP event. */ +#define LPCOMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */ +#define LPCOMP_INTENCLR_UP_Msk (0x1UL << LPCOMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */ +#define LPCOMP_INTENCLR_UP_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_UP_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_UP_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on DOWN event. */ +#define LPCOMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */ +#define LPCOMP_INTENCLR_DOWN_Msk (0x1UL << LPCOMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */ +#define LPCOMP_INTENCLR_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on READY event. */ +#define LPCOMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ +#define LPCOMP_INTENCLR_READY_Msk (0x1UL << LPCOMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define LPCOMP_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: LPCOMP_RESULT */ +/* Description: Result of last compare. */ + +/* Bit 0 : Result of last compare. Decision point SAMPLE task. */ +#define LPCOMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ +#define LPCOMP_RESULT_RESULT_Msk (0x1UL << LPCOMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ +#define LPCOMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is bellow the reference threshold. */ +#define LPCOMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */ + +/* Register: LPCOMP_ENABLE */ +/* Description: Enable the LPCOMP. */ + +/* Bits 1..0 : Enable or disable LPCOMP. */ +#define LPCOMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define LPCOMP_ENABLE_ENABLE_Msk (0x3UL << LPCOMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define LPCOMP_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled LPCOMP. */ +#define LPCOMP_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable LPCOMP. */ + +/* Register: LPCOMP_PSEL */ +/* Description: Input pin select. */ + +/* Bits 2..0 : Analog input pin select. */ +#define LPCOMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */ +#define LPCOMP_PSEL_PSEL_Msk (0x7UL << LPCOMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */ +#define LPCOMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */ + +/* Register: LPCOMP_REFSEL */ +/* Description: Reference select. */ + +/* Bits 2..0 : Reference select. */ +#define LPCOMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */ +#define LPCOMP_REFSEL_REFSEL_Msk (0x7UL << LPCOMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ +#define LPCOMP_REFSEL_REFSEL_SupplyOneEighthPrescaling (0UL) /*!< Use analog supply with a 1/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyTwoEighthsPrescaling (1UL) /*!< Use analog supply with a 2/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyThreeEighthsPrescaling (2UL) /*!< Use analog supply with a 3/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyFourEighthsPrescaling (3UL) /*!< Use analog supply with a 4/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyFiveEighthsPrescaling (4UL) /*!< Use analog supply with a 5/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplySixEighthsPrescaling (5UL) /*!< Use analog supply with a 6/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplySevenEighthsPrescaling (6UL) /*!< Use analog supply with a 7/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_ARef (7UL) /*!< Use external analog reference as reference. */ + +/* Register: LPCOMP_EXTREFSEL */ +/* Description: External reference select. */ + +/* Bit 0 : External analog reference pin selection. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << LPCOMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use analog reference 0 as reference. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use analog reference 1 as reference. */ + +/* Register: LPCOMP_ANADETECT */ +/* Description: Analog detect configuration. */ + +/* Bits 1..0 : Analog detect configuration. */ +#define LPCOMP_ANADETECT_ANADETECT_Pos (0UL) /*!< Position of ANADETECT field. */ +#define LPCOMP_ANADETECT_ANADETECT_Msk (0x3UL << LPCOMP_ANADETECT_ANADETECT_Pos) /*!< Bit mask of ANADETECT field. */ +#define LPCOMP_ANADETECT_ANADETECT_Cross (0UL) /*!< Generate ANADETEC on crossing, both upwards and downwards crossing. */ +#define LPCOMP_ANADETECT_ANADETECT_Up (1UL) /*!< Generate ANADETEC on upwards crossing only. */ +#define LPCOMP_ANADETECT_ANADETECT_Down (2UL) /*!< Generate ANADETEC on downwards crossing only. */ + +/* Register: LPCOMP_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define LPCOMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define LPCOMP_POWER_POWER_Msk (0x1UL << LPCOMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define LPCOMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define LPCOMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: MPU */ +/* Description: Memory Protection Unit. */ + +/* Register: MPU_PERR0 */ +/* Description: Configuration of peripherals in mpu regions. */ + +/* Bit 31 : PPI region configuration. */ +#define MPU_PERR0_PPI_Pos (31UL) /*!< Position of PPI field. */ +#define MPU_PERR0_PPI_Msk (0x1UL << MPU_PERR0_PPI_Pos) /*!< Bit mask of PPI field. */ +#define MPU_PERR0_PPI_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_PPI_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 30 : NVMC region configuration. */ +#define MPU_PERR0_NVMC_Pos (30UL) /*!< Position of NVMC field. */ +#define MPU_PERR0_NVMC_Msk (0x1UL << MPU_PERR0_NVMC_Pos) /*!< Bit mask of NVMC field. */ +#define MPU_PERR0_NVMC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_NVMC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 19 : LPCOMP_COMP region configuration. */ +#define MPU_PERR0_LPCOMP_COMP_Pos (19UL) /*!< Position of LPCOMP_COMP field. */ +#define MPU_PERR0_LPCOMP_COMP_Msk (0x1UL << MPU_PERR0_LPCOMP_COMP_Pos) /*!< Bit mask of LPCOMP_COMP field. */ +#define MPU_PERR0_LPCOMP_COMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_LPCOMP_COMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 18 : QDEC region configuration. */ +#define MPU_PERR0_QDEC_Pos (18UL) /*!< Position of QDEC field. */ +#define MPU_PERR0_QDEC_Msk (0x1UL << MPU_PERR0_QDEC_Pos) /*!< Bit mask of QDEC field. */ +#define MPU_PERR0_QDEC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_QDEC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 17 : RTC1 region configuration. */ +#define MPU_PERR0_RTC1_Pos (17UL) /*!< Position of RTC1 field. */ +#define MPU_PERR0_RTC1_Msk (0x1UL << MPU_PERR0_RTC1_Pos) /*!< Bit mask of RTC1 field. */ +#define MPU_PERR0_RTC1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RTC1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 16 : WDT region configuration. */ +#define MPU_PERR0_WDT_Pos (16UL) /*!< Position of WDT field. */ +#define MPU_PERR0_WDT_Msk (0x1UL << MPU_PERR0_WDT_Pos) /*!< Bit mask of WDT field. */ +#define MPU_PERR0_WDT_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_WDT_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 15 : CCM and AAR region configuration. */ +#define MPU_PERR0_CCM_AAR_Pos (15UL) /*!< Position of CCM_AAR field. */ +#define MPU_PERR0_CCM_AAR_Msk (0x1UL << MPU_PERR0_CCM_AAR_Pos) /*!< Bit mask of CCM_AAR field. */ +#define MPU_PERR0_CCM_AAR_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_CCM_AAR_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 14 : ECB region configuration. */ +#define MPU_PERR0_ECB_Pos (14UL) /*!< Position of ECB field. */ +#define MPU_PERR0_ECB_Msk (0x1UL << MPU_PERR0_ECB_Pos) /*!< Bit mask of ECB field. */ +#define MPU_PERR0_ECB_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_ECB_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 13 : RNG region configuration. */ +#define MPU_PERR0_RNG_Pos (13UL) /*!< Position of RNG field. */ +#define MPU_PERR0_RNG_Msk (0x1UL << MPU_PERR0_RNG_Pos) /*!< Bit mask of RNG field. */ +#define MPU_PERR0_RNG_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RNG_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 12 : TEMP region configuration. */ +#define MPU_PERR0_TEMP_Pos (12UL) /*!< Position of TEMP field. */ +#define MPU_PERR0_TEMP_Msk (0x1UL << MPU_PERR0_TEMP_Pos) /*!< Bit mask of TEMP field. */ +#define MPU_PERR0_TEMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TEMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 11 : RTC0 region configuration. */ +#define MPU_PERR0_RTC0_Pos (11UL) /*!< Position of RTC0 field. */ +#define MPU_PERR0_RTC0_Msk (0x1UL << MPU_PERR0_RTC0_Pos) /*!< Bit mask of RTC0 field. */ +#define MPU_PERR0_RTC0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RTC0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 10 : TIMER2 region configuration. */ +#define MPU_PERR0_TIMER2_Pos (10UL) /*!< Position of TIMER2 field. */ +#define MPU_PERR0_TIMER2_Msk (0x1UL << MPU_PERR0_TIMER2_Pos) /*!< Bit mask of TIMER2 field. */ +#define MPU_PERR0_TIMER2_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TIMER2_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 9 : TIMER1 region configuration. */ +#define MPU_PERR0_TIMER1_Pos (9UL) /*!< Position of TIMER1 field. */ +#define MPU_PERR0_TIMER1_Msk (0x1UL << MPU_PERR0_TIMER1_Pos) /*!< Bit mask of TIMER1 field. */ +#define MPU_PERR0_TIMER1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TIMER1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 8 : TIMER0 region configuration. */ +#define MPU_PERR0_TIMER0_Pos (8UL) /*!< Position of TIMER0 field. */ +#define MPU_PERR0_TIMER0_Msk (0x1UL << MPU_PERR0_TIMER0_Pos) /*!< Bit mask of TIMER0 field. */ +#define MPU_PERR0_TIMER0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TIMER0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 7 : ADC region configuration. */ +#define MPU_PERR0_ADC_Pos (7UL) /*!< Position of ADC field. */ +#define MPU_PERR0_ADC_Msk (0x1UL << MPU_PERR0_ADC_Pos) /*!< Bit mask of ADC field. */ +#define MPU_PERR0_ADC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_ADC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 6 : GPIOTE region configuration. */ +#define MPU_PERR0_GPIOTE_Pos (6UL) /*!< Position of GPIOTE field. */ +#define MPU_PERR0_GPIOTE_Msk (0x1UL << MPU_PERR0_GPIOTE_Pos) /*!< Bit mask of GPIOTE field. */ +#define MPU_PERR0_GPIOTE_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_GPIOTE_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 4 : SPI1 and TWI1 region configuration. */ +#define MPU_PERR0_SPI1_TWI1_Pos (4UL) /*!< Position of SPI1_TWI1 field. */ +#define MPU_PERR0_SPI1_TWI1_Msk (0x1UL << MPU_PERR0_SPI1_TWI1_Pos) /*!< Bit mask of SPI1_TWI1 field. */ +#define MPU_PERR0_SPI1_TWI1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_SPI1_TWI1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 3 : SPI0 and TWI0 region configuration. */ +#define MPU_PERR0_SPI0_TWI0_Pos (3UL) /*!< Position of SPI0_TWI0 field. */ +#define MPU_PERR0_SPI0_TWI0_Msk (0x1UL << MPU_PERR0_SPI0_TWI0_Pos) /*!< Bit mask of SPI0_TWI0 field. */ +#define MPU_PERR0_SPI0_TWI0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_SPI0_TWI0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 2 : UART0 region configuration. */ +#define MPU_PERR0_UART0_Pos (2UL) /*!< Position of UART0 field. */ +#define MPU_PERR0_UART0_Msk (0x1UL << MPU_PERR0_UART0_Pos) /*!< Bit mask of UART0 field. */ +#define MPU_PERR0_UART0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_UART0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 1 : RADIO region configuration. */ +#define MPU_PERR0_RADIO_Pos (1UL) /*!< Position of RADIO field. */ +#define MPU_PERR0_RADIO_Msk (0x1UL << MPU_PERR0_RADIO_Pos) /*!< Bit mask of RADIO field. */ +#define MPU_PERR0_RADIO_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RADIO_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 0 : POWER_CLOCK region configuration. */ +#define MPU_PERR0_POWER_CLOCK_Pos (0UL) /*!< Position of POWER_CLOCK field. */ +#define MPU_PERR0_POWER_CLOCK_Msk (0x1UL << MPU_PERR0_POWER_CLOCK_Pos) /*!< Bit mask of POWER_CLOCK field. */ +#define MPU_PERR0_POWER_CLOCK_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_POWER_CLOCK_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Register: MPU_PROTENSET0 */ +/* Description: Protection bit enable set register for low addresses. */ + +/* Bit 31 : Protection enable for region 31. */ +#define MPU_PROTENSET0_PROTREG31_Pos (31UL) /*!< Position of PROTREG31 field. */ +#define MPU_PROTENSET0_PROTREG31_Msk (0x1UL << MPU_PROTENSET0_PROTREG31_Pos) /*!< Bit mask of PROTREG31 field. */ +#define MPU_PROTENSET0_PROTREG31_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG31_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG31_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 30 : Protection enable for region 30. */ +#define MPU_PROTENSET0_PROTREG30_Pos (30UL) /*!< Position of PROTREG30 field. */ +#define MPU_PROTENSET0_PROTREG30_Msk (0x1UL << MPU_PROTENSET0_PROTREG30_Pos) /*!< Bit mask of PROTREG30 field. */ +#define MPU_PROTENSET0_PROTREG30_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG30_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG30_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 29 : Protection enable for region 29. */ +#define MPU_PROTENSET0_PROTREG29_Pos (29UL) /*!< Position of PROTREG29 field. */ +#define MPU_PROTENSET0_PROTREG29_Msk (0x1UL << MPU_PROTENSET0_PROTREG29_Pos) /*!< Bit mask of PROTREG29 field. */ +#define MPU_PROTENSET0_PROTREG29_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG29_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG29_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 28 : Protection enable for region 28. */ +#define MPU_PROTENSET0_PROTREG28_Pos (28UL) /*!< Position of PROTREG28 field. */ +#define MPU_PROTENSET0_PROTREG28_Msk (0x1UL << MPU_PROTENSET0_PROTREG28_Pos) /*!< Bit mask of PROTREG28 field. */ +#define MPU_PROTENSET0_PROTREG28_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG28_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG28_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 27 : Protection enable for region 27. */ +#define MPU_PROTENSET0_PROTREG27_Pos (27UL) /*!< Position of PROTREG27 field. */ +#define MPU_PROTENSET0_PROTREG27_Msk (0x1UL << MPU_PROTENSET0_PROTREG27_Pos) /*!< Bit mask of PROTREG27 field. */ +#define MPU_PROTENSET0_PROTREG27_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG27_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG27_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 26 : Protection enable for region 26. */ +#define MPU_PROTENSET0_PROTREG26_Pos (26UL) /*!< Position of PROTREG26 field. */ +#define MPU_PROTENSET0_PROTREG26_Msk (0x1UL << MPU_PROTENSET0_PROTREG26_Pos) /*!< Bit mask of PROTREG26 field. */ +#define MPU_PROTENSET0_PROTREG26_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG26_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG26_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 25 : Protection enable for region 25. */ +#define MPU_PROTENSET0_PROTREG25_Pos (25UL) /*!< Position of PROTREG25 field. */ +#define MPU_PROTENSET0_PROTREG25_Msk (0x1UL << MPU_PROTENSET0_PROTREG25_Pos) /*!< Bit mask of PROTREG25 field. */ +#define MPU_PROTENSET0_PROTREG25_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG25_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG25_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 24 : Protection enable for region 24. */ +#define MPU_PROTENSET0_PROTREG24_Pos (24UL) /*!< Position of PROTREG24 field. */ +#define MPU_PROTENSET0_PROTREG24_Msk (0x1UL << MPU_PROTENSET0_PROTREG24_Pos) /*!< Bit mask of PROTREG24 field. */ +#define MPU_PROTENSET0_PROTREG24_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG24_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG24_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 23 : Protection enable for region 23. */ +#define MPU_PROTENSET0_PROTREG23_Pos (23UL) /*!< Position of PROTREG23 field. */ +#define MPU_PROTENSET0_PROTREG23_Msk (0x1UL << MPU_PROTENSET0_PROTREG23_Pos) /*!< Bit mask of PROTREG23 field. */ +#define MPU_PROTENSET0_PROTREG23_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG23_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG23_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 22 : Protection enable for region 22. */ +#define MPU_PROTENSET0_PROTREG22_Pos (22UL) /*!< Position of PROTREG22 field. */ +#define MPU_PROTENSET0_PROTREG22_Msk (0x1UL << MPU_PROTENSET0_PROTREG22_Pos) /*!< Bit mask of PROTREG22 field. */ +#define MPU_PROTENSET0_PROTREG22_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG22_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG22_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 21 : Protection enable for region 21. */ +#define MPU_PROTENSET0_PROTREG21_Pos (21UL) /*!< Position of PROTREG21 field. */ +#define MPU_PROTENSET0_PROTREG21_Msk (0x1UL << MPU_PROTENSET0_PROTREG21_Pos) /*!< Bit mask of PROTREG21 field. */ +#define MPU_PROTENSET0_PROTREG21_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG21_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG21_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 20 : Protection enable for region 20. */ +#define MPU_PROTENSET0_PROTREG20_Pos (20UL) /*!< Position of PROTREG20 field. */ +#define MPU_PROTENSET0_PROTREG20_Msk (0x1UL << MPU_PROTENSET0_PROTREG20_Pos) /*!< Bit mask of PROTREG20 field. */ +#define MPU_PROTENSET0_PROTREG20_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG20_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG20_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 19 : Protection enable for region 19. */ +#define MPU_PROTENSET0_PROTREG19_Pos (19UL) /*!< Position of PROTREG19 field. */ +#define MPU_PROTENSET0_PROTREG19_Msk (0x1UL << MPU_PROTENSET0_PROTREG19_Pos) /*!< Bit mask of PROTREG19 field. */ +#define MPU_PROTENSET0_PROTREG19_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG19_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG19_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 18 : Protection enable for region 18. */ +#define MPU_PROTENSET0_PROTREG18_Pos (18UL) /*!< Position of PROTREG18 field. */ +#define MPU_PROTENSET0_PROTREG18_Msk (0x1UL << MPU_PROTENSET0_PROTREG18_Pos) /*!< Bit mask of PROTREG18 field. */ +#define MPU_PROTENSET0_PROTREG18_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG18_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG18_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 17 : Protection enable for region 17. */ +#define MPU_PROTENSET0_PROTREG17_Pos (17UL) /*!< Position of PROTREG17 field. */ +#define MPU_PROTENSET0_PROTREG17_Msk (0x1UL << MPU_PROTENSET0_PROTREG17_Pos) /*!< Bit mask of PROTREG17 field. */ +#define MPU_PROTENSET0_PROTREG17_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG17_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG17_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 16 : Protection enable for region 16. */ +#define MPU_PROTENSET0_PROTREG16_Pos (16UL) /*!< Position of PROTREG16 field. */ +#define MPU_PROTENSET0_PROTREG16_Msk (0x1UL << MPU_PROTENSET0_PROTREG16_Pos) /*!< Bit mask of PROTREG16 field. */ +#define MPU_PROTENSET0_PROTREG16_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG16_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG16_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 15 : Protection enable for region 15. */ +#define MPU_PROTENSET0_PROTREG15_Pos (15UL) /*!< Position of PROTREG15 field. */ +#define MPU_PROTENSET0_PROTREG15_Msk (0x1UL << MPU_PROTENSET0_PROTREG15_Pos) /*!< Bit mask of PROTREG15 field. */ +#define MPU_PROTENSET0_PROTREG15_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG15_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG15_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 14 : Protection enable for region 14. */ +#define MPU_PROTENSET0_PROTREG14_Pos (14UL) /*!< Position of PROTREG14 field. */ +#define MPU_PROTENSET0_PROTREG14_Msk (0x1UL << MPU_PROTENSET0_PROTREG14_Pos) /*!< Bit mask of PROTREG14 field. */ +#define MPU_PROTENSET0_PROTREG14_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG14_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG14_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 13 : Protection enable for region 13. */ +#define MPU_PROTENSET0_PROTREG13_Pos (13UL) /*!< Position of PROTREG13 field. */ +#define MPU_PROTENSET0_PROTREG13_Msk (0x1UL << MPU_PROTENSET0_PROTREG13_Pos) /*!< Bit mask of PROTREG13 field. */ +#define MPU_PROTENSET0_PROTREG13_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG13_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG13_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 12 : Protection enable for region 12. */ +#define MPU_PROTENSET0_PROTREG12_Pos (12UL) /*!< Position of PROTREG12 field. */ +#define MPU_PROTENSET0_PROTREG12_Msk (0x1UL << MPU_PROTENSET0_PROTREG12_Pos) /*!< Bit mask of PROTREG12 field. */ +#define MPU_PROTENSET0_PROTREG12_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG12_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG12_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 11 : Protection enable for region 11. */ +#define MPU_PROTENSET0_PROTREG11_Pos (11UL) /*!< Position of PROTREG11 field. */ +#define MPU_PROTENSET0_PROTREG11_Msk (0x1UL << MPU_PROTENSET0_PROTREG11_Pos) /*!< Bit mask of PROTREG11 field. */ +#define MPU_PROTENSET0_PROTREG11_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG11_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG11_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 10 : Protection enable for region 10. */ +#define MPU_PROTENSET0_PROTREG10_Pos (10UL) /*!< Position of PROTREG10 field. */ +#define MPU_PROTENSET0_PROTREG10_Msk (0x1UL << MPU_PROTENSET0_PROTREG10_Pos) /*!< Bit mask of PROTREG10 field. */ +#define MPU_PROTENSET0_PROTREG10_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG10_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG10_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 9 : Protection enable for region 9. */ +#define MPU_PROTENSET0_PROTREG9_Pos (9UL) /*!< Position of PROTREG9 field. */ +#define MPU_PROTENSET0_PROTREG9_Msk (0x1UL << MPU_PROTENSET0_PROTREG9_Pos) /*!< Bit mask of PROTREG9 field. */ +#define MPU_PROTENSET0_PROTREG9_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG9_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG9_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 8 : Protection enable for region 8. */ +#define MPU_PROTENSET0_PROTREG8_Pos (8UL) /*!< Position of PROTREG8 field. */ +#define MPU_PROTENSET0_PROTREG8_Msk (0x1UL << MPU_PROTENSET0_PROTREG8_Pos) /*!< Bit mask of PROTREG8 field. */ +#define MPU_PROTENSET0_PROTREG8_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG8_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG8_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 7 : Protection enable for region 7. */ +#define MPU_PROTENSET0_PROTREG7_Pos (7UL) /*!< Position of PROTREG7 field. */ +#define MPU_PROTENSET0_PROTREG7_Msk (0x1UL << MPU_PROTENSET0_PROTREG7_Pos) /*!< Bit mask of PROTREG7 field. */ +#define MPU_PROTENSET0_PROTREG7_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG7_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG7_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 6 : Protection enable for region 6. */ +#define MPU_PROTENSET0_PROTREG6_Pos (6UL) /*!< Position of PROTREG6 field. */ +#define MPU_PROTENSET0_PROTREG6_Msk (0x1UL << MPU_PROTENSET0_PROTREG6_Pos) /*!< Bit mask of PROTREG6 field. */ +#define MPU_PROTENSET0_PROTREG6_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG6_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG6_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 5 : Protection enable for region 5. */ +#define MPU_PROTENSET0_PROTREG5_Pos (5UL) /*!< Position of PROTREG5 field. */ +#define MPU_PROTENSET0_PROTREG5_Msk (0x1UL << MPU_PROTENSET0_PROTREG5_Pos) /*!< Bit mask of PROTREG5 field. */ +#define MPU_PROTENSET0_PROTREG5_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG5_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG5_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 4 : Protection enable for region 4. */ +#define MPU_PROTENSET0_PROTREG4_Pos (4UL) /*!< Position of PROTREG4 field. */ +#define MPU_PROTENSET0_PROTREG4_Msk (0x1UL << MPU_PROTENSET0_PROTREG4_Pos) /*!< Bit mask of PROTREG4 field. */ +#define MPU_PROTENSET0_PROTREG4_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG4_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG4_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 3 : Protection enable for region 3. */ +#define MPU_PROTENSET0_PROTREG3_Pos (3UL) /*!< Position of PROTREG3 field. */ +#define MPU_PROTENSET0_PROTREG3_Msk (0x1UL << MPU_PROTENSET0_PROTREG3_Pos) /*!< Bit mask of PROTREG3 field. */ +#define MPU_PROTENSET0_PROTREG3_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG3_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG3_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 2 : Protection enable for region 2. */ +#define MPU_PROTENSET0_PROTREG2_Pos (2UL) /*!< Position of PROTREG2 field. */ +#define MPU_PROTENSET0_PROTREG2_Msk (0x1UL << MPU_PROTENSET0_PROTREG2_Pos) /*!< Bit mask of PROTREG2 field. */ +#define MPU_PROTENSET0_PROTREG2_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG2_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG2_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 1 : Protection enable for region 1. */ +#define MPU_PROTENSET0_PROTREG1_Pos (1UL) /*!< Position of PROTREG1 field. */ +#define MPU_PROTENSET0_PROTREG1_Msk (0x1UL << MPU_PROTENSET0_PROTREG1_Pos) /*!< Bit mask of PROTREG1 field. */ +#define MPU_PROTENSET0_PROTREG1_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG1_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG1_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 0 : Protection enable for region 0. */ +#define MPU_PROTENSET0_PROTREG0_Pos (0UL) /*!< Position of PROTREG0 field. */ +#define MPU_PROTENSET0_PROTREG0_Msk (0x1UL << MPU_PROTENSET0_PROTREG0_Pos) /*!< Bit mask of PROTREG0 field. */ +#define MPU_PROTENSET0_PROTREG0_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG0_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG0_Set (1UL) /*!< Enable protection on write. */ + +/* Register: MPU_PROTENSET1 */ +/* Description: Protection bit enable set register for high addresses. */ + +/* Bit 31 : Protection enable for region 63. */ +#define MPU_PROTENSET1_PROTREG63_Pos (31UL) /*!< Position of PROTREG63 field. */ +#define MPU_PROTENSET1_PROTREG63_Msk (0x1UL << MPU_PROTENSET1_PROTREG63_Pos) /*!< Bit mask of PROTREG63 field. */ +#define MPU_PROTENSET1_PROTREG63_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG63_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG63_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 30 : Protection enable for region 62. */ +#define MPU_PROTENSET1_PROTREG62_Pos (30UL) /*!< Position of PROTREG62 field. */ +#define MPU_PROTENSET1_PROTREG62_Msk (0x1UL << MPU_PROTENSET1_PROTREG62_Pos) /*!< Bit mask of PROTREG62 field. */ +#define MPU_PROTENSET1_PROTREG62_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG62_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG62_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 29 : Protection enable for region 61. */ +#define MPU_PROTENSET1_PROTREG61_Pos (29UL) /*!< Position of PROTREG61 field. */ +#define MPU_PROTENSET1_PROTREG61_Msk (0x1UL << MPU_PROTENSET1_PROTREG61_Pos) /*!< Bit mask of PROTREG61 field. */ +#define MPU_PROTENSET1_PROTREG61_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG61_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG61_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 28 : Protection enable for region 60. */ +#define MPU_PROTENSET1_PROTREG60_Pos (28UL) /*!< Position of PROTREG60 field. */ +#define MPU_PROTENSET1_PROTREG60_Msk (0x1UL << MPU_PROTENSET1_PROTREG60_Pos) /*!< Bit mask of PROTREG60 field. */ +#define MPU_PROTENSET1_PROTREG60_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG60_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG60_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 27 : Protection enable for region 59. */ +#define MPU_PROTENSET1_PROTREG59_Pos (27UL) /*!< Position of PROTREG59 field. */ +#define MPU_PROTENSET1_PROTREG59_Msk (0x1UL << MPU_PROTENSET1_PROTREG59_Pos) /*!< Bit mask of PROTREG59 field. */ +#define MPU_PROTENSET1_PROTREG59_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG59_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG59_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 26 : Protection enable for region 58. */ +#define MPU_PROTENSET1_PROTREG58_Pos (26UL) /*!< Position of PROTREG58 field. */ +#define MPU_PROTENSET1_PROTREG58_Msk (0x1UL << MPU_PROTENSET1_PROTREG58_Pos) /*!< Bit mask of PROTREG58 field. */ +#define MPU_PROTENSET1_PROTREG58_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG58_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG58_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 25 : Protection enable for region 57. */ +#define MPU_PROTENSET1_PROTREG57_Pos (25UL) /*!< Position of PROTREG57 field. */ +#define MPU_PROTENSET1_PROTREG57_Msk (0x1UL << MPU_PROTENSET1_PROTREG57_Pos) /*!< Bit mask of PROTREG57 field. */ +#define MPU_PROTENSET1_PROTREG57_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG57_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG57_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 24 : Protection enable for region 56. */ +#define MPU_PROTENSET1_PROTREG56_Pos (24UL) /*!< Position of PROTREG56 field. */ +#define MPU_PROTENSET1_PROTREG56_Msk (0x1UL << MPU_PROTENSET1_PROTREG56_Pos) /*!< Bit mask of PROTREG56 field. */ +#define MPU_PROTENSET1_PROTREG56_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG56_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG56_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 23 : Protection enable for region 55. */ +#define MPU_PROTENSET1_PROTREG55_Pos (23UL) /*!< Position of PROTREG55 field. */ +#define MPU_PROTENSET1_PROTREG55_Msk (0x1UL << MPU_PROTENSET1_PROTREG55_Pos) /*!< Bit mask of PROTREG55 field. */ +#define MPU_PROTENSET1_PROTREG55_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG55_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG55_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 22 : Protection enable for region 54. */ +#define MPU_PROTENSET1_PROTREG54_Pos (22UL) /*!< Position of PROTREG54 field. */ +#define MPU_PROTENSET1_PROTREG54_Msk (0x1UL << MPU_PROTENSET1_PROTREG54_Pos) /*!< Bit mask of PROTREG54 field. */ +#define MPU_PROTENSET1_PROTREG54_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG54_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG54_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 21 : Protection enable for region 53. */ +#define MPU_PROTENSET1_PROTREG53_Pos (21UL) /*!< Position of PROTREG53 field. */ +#define MPU_PROTENSET1_PROTREG53_Msk (0x1UL << MPU_PROTENSET1_PROTREG53_Pos) /*!< Bit mask of PROTREG53 field. */ +#define MPU_PROTENSET1_PROTREG53_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG53_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG53_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 20 : Protection enable for region 52. */ +#define MPU_PROTENSET1_PROTREG52_Pos (20UL) /*!< Position of PROTREG52 field. */ +#define MPU_PROTENSET1_PROTREG52_Msk (0x1UL << MPU_PROTENSET1_PROTREG52_Pos) /*!< Bit mask of PROTREG52 field. */ +#define MPU_PROTENSET1_PROTREG52_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG52_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG52_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 19 : Protection enable for region 51. */ +#define MPU_PROTENSET1_PROTREG51_Pos (19UL) /*!< Position of PROTREG51 field. */ +#define MPU_PROTENSET1_PROTREG51_Msk (0x1UL << MPU_PROTENSET1_PROTREG51_Pos) /*!< Bit mask of PROTREG51 field. */ +#define MPU_PROTENSET1_PROTREG51_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG51_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG51_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 18 : Protection enable for region 50. */ +#define MPU_PROTENSET1_PROTREG50_Pos (18UL) /*!< Position of PROTREG50 field. */ +#define MPU_PROTENSET1_PROTREG50_Msk (0x1UL << MPU_PROTENSET1_PROTREG50_Pos) /*!< Bit mask of PROTREG50 field. */ +#define MPU_PROTENSET1_PROTREG50_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG50_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG50_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 17 : Protection enable for region 49. */ +#define MPU_PROTENSET1_PROTREG49_Pos (17UL) /*!< Position of PROTREG49 field. */ +#define MPU_PROTENSET1_PROTREG49_Msk (0x1UL << MPU_PROTENSET1_PROTREG49_Pos) /*!< Bit mask of PROTREG49 field. */ +#define MPU_PROTENSET1_PROTREG49_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG49_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG49_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 16 : Protection enable for region 48. */ +#define MPU_PROTENSET1_PROTREG48_Pos (16UL) /*!< Position of PROTREG48 field. */ +#define MPU_PROTENSET1_PROTREG48_Msk (0x1UL << MPU_PROTENSET1_PROTREG48_Pos) /*!< Bit mask of PROTREG48 field. */ +#define MPU_PROTENSET1_PROTREG48_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG48_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG48_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 15 : Protection enable for region 47. */ +#define MPU_PROTENSET1_PROTREG47_Pos (15UL) /*!< Position of PROTREG47 field. */ +#define MPU_PROTENSET1_PROTREG47_Msk (0x1UL << MPU_PROTENSET1_PROTREG47_Pos) /*!< Bit mask of PROTREG47 field. */ +#define MPU_PROTENSET1_PROTREG47_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG47_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG47_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 14 : Protection enable for region 46. */ +#define MPU_PROTENSET1_PROTREG46_Pos (14UL) /*!< Position of PROTREG46 field. */ +#define MPU_PROTENSET1_PROTREG46_Msk (0x1UL << MPU_PROTENSET1_PROTREG46_Pos) /*!< Bit mask of PROTREG46 field. */ +#define MPU_PROTENSET1_PROTREG46_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG46_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG46_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 13 : Protection enable for region 45. */ +#define MPU_PROTENSET1_PROTREG45_Pos (13UL) /*!< Position of PROTREG45 field. */ +#define MPU_PROTENSET1_PROTREG45_Msk (0x1UL << MPU_PROTENSET1_PROTREG45_Pos) /*!< Bit mask of PROTREG45 field. */ +#define MPU_PROTENSET1_PROTREG45_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG45_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG45_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 12 : Protection enable for region 44. */ +#define MPU_PROTENSET1_PROTREG44_Pos (12UL) /*!< Position of PROTREG44 field. */ +#define MPU_PROTENSET1_PROTREG44_Msk (0x1UL << MPU_PROTENSET1_PROTREG44_Pos) /*!< Bit mask of PROTREG44 field. */ +#define MPU_PROTENSET1_PROTREG44_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG44_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG44_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 11 : Protection enable for region 43. */ +#define MPU_PROTENSET1_PROTREG43_Pos (11UL) /*!< Position of PROTREG43 field. */ +#define MPU_PROTENSET1_PROTREG43_Msk (0x1UL << MPU_PROTENSET1_PROTREG43_Pos) /*!< Bit mask of PROTREG43 field. */ +#define MPU_PROTENSET1_PROTREG43_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG43_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG43_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 10 : Protection enable for region 42. */ +#define MPU_PROTENSET1_PROTREG42_Pos (10UL) /*!< Position of PROTREG42 field. */ +#define MPU_PROTENSET1_PROTREG42_Msk (0x1UL << MPU_PROTENSET1_PROTREG42_Pos) /*!< Bit mask of PROTREG42 field. */ +#define MPU_PROTENSET1_PROTREG42_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG42_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG42_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 9 : Protection enable for region 41. */ +#define MPU_PROTENSET1_PROTREG41_Pos (9UL) /*!< Position of PROTREG41 field. */ +#define MPU_PROTENSET1_PROTREG41_Msk (0x1UL << MPU_PROTENSET1_PROTREG41_Pos) /*!< Bit mask of PROTREG41 field. */ +#define MPU_PROTENSET1_PROTREG41_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG41_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG41_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 8 : Protection enable for region 40. */ +#define MPU_PROTENSET1_PROTREG40_Pos (8UL) /*!< Position of PROTREG40 field. */ +#define MPU_PROTENSET1_PROTREG40_Msk (0x1UL << MPU_PROTENSET1_PROTREG40_Pos) /*!< Bit mask of PROTREG40 field. */ +#define MPU_PROTENSET1_PROTREG40_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG40_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG40_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 7 : Protection enable for region 39. */ +#define MPU_PROTENSET1_PROTREG39_Pos (7UL) /*!< Position of PROTREG39 field. */ +#define MPU_PROTENSET1_PROTREG39_Msk (0x1UL << MPU_PROTENSET1_PROTREG39_Pos) /*!< Bit mask of PROTREG39 field. */ +#define MPU_PROTENSET1_PROTREG39_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG39_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG39_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 6 : Protection enable for region 38. */ +#define MPU_PROTENSET1_PROTREG38_Pos (6UL) /*!< Position of PROTREG38 field. */ +#define MPU_PROTENSET1_PROTREG38_Msk (0x1UL << MPU_PROTENSET1_PROTREG38_Pos) /*!< Bit mask of PROTREG38 field. */ +#define MPU_PROTENSET1_PROTREG38_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG38_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG38_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 5 : Protection enable for region 37. */ +#define MPU_PROTENSET1_PROTREG37_Pos (5UL) /*!< Position of PROTREG37 field. */ +#define MPU_PROTENSET1_PROTREG37_Msk (0x1UL << MPU_PROTENSET1_PROTREG37_Pos) /*!< Bit mask of PROTREG37 field. */ +#define MPU_PROTENSET1_PROTREG37_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG37_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG37_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 4 : Protection enable for region 36. */ +#define MPU_PROTENSET1_PROTREG36_Pos (4UL) /*!< Position of PROTREG36 field. */ +#define MPU_PROTENSET1_PROTREG36_Msk (0x1UL << MPU_PROTENSET1_PROTREG36_Pos) /*!< Bit mask of PROTREG36 field. */ +#define MPU_PROTENSET1_PROTREG36_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG36_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG36_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 3 : Protection enable for region 35. */ +#define MPU_PROTENSET1_PROTREG35_Pos (3UL) /*!< Position of PROTREG35 field. */ +#define MPU_PROTENSET1_PROTREG35_Msk (0x1UL << MPU_PROTENSET1_PROTREG35_Pos) /*!< Bit mask of PROTREG35 field. */ +#define MPU_PROTENSET1_PROTREG35_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG35_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG35_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 2 : Protection enable for region 34. */ +#define MPU_PROTENSET1_PROTREG34_Pos (2UL) /*!< Position of PROTREG34 field. */ +#define MPU_PROTENSET1_PROTREG34_Msk (0x1UL << MPU_PROTENSET1_PROTREG34_Pos) /*!< Bit mask of PROTREG34 field. */ +#define MPU_PROTENSET1_PROTREG34_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG34_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG34_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 1 : Protection enable for region 33. */ +#define MPU_PROTENSET1_PROTREG33_Pos (1UL) /*!< Position of PROTREG33 field. */ +#define MPU_PROTENSET1_PROTREG33_Msk (0x1UL << MPU_PROTENSET1_PROTREG33_Pos) /*!< Bit mask of PROTREG33 field. */ +#define MPU_PROTENSET1_PROTREG33_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG33_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG33_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 0 : Protection enable for region 32. */ +#define MPU_PROTENSET1_PROTREG32_Pos (0UL) /*!< Position of PROTREG32 field. */ +#define MPU_PROTENSET1_PROTREG32_Msk (0x1UL << MPU_PROTENSET1_PROTREG32_Pos) /*!< Bit mask of PROTREG32 field. */ +#define MPU_PROTENSET1_PROTREG32_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG32_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG32_Set (1UL) /*!< Enable protection on write. */ + +/* Register: MPU_DISABLEINDEBUG */ +/* Description: Disable protection mechanism in debug mode. */ + +/* Bit 0 : Disable protection mechanism in debug mode. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos (0UL) /*!< Position of DISABLEINDEBUG field. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Msk (0x1UL << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos) /*!< Bit mask of DISABLEINDEBUG field. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Enabled (0UL) /*!< Protection enabled. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled (1UL) /*!< Protection disabled. */ + + +/* Peripheral: NVMC */ +/* Description: Non Volatile Memory Controller. */ + +/* Register: NVMC_READY */ +/* Description: Ready flag. */ + +/* Bit 0 : NVMC ready. */ +#define NVMC_READY_READY_Pos (0UL) /*!< Position of READY field. */ +#define NVMC_READY_READY_Msk (0x1UL << NVMC_READY_READY_Pos) /*!< Bit mask of READY field. */ +#define NVMC_READY_READY_Busy (0UL) /*!< NVMC is busy (on-going write or erase operation). */ +#define NVMC_READY_READY_Ready (1UL) /*!< NVMC is ready. */ + +/* Register: NVMC_CONFIG */ +/* Description: Configuration register. */ + +/* Bits 1..0 : Program write enable. */ +#define NVMC_CONFIG_WEN_Pos (0UL) /*!< Position of WEN field. */ +#define NVMC_CONFIG_WEN_Msk (0x3UL << NVMC_CONFIG_WEN_Pos) /*!< Bit mask of WEN field. */ +#define NVMC_CONFIG_WEN_Ren (0x00UL) /*!< Read only access. */ +#define NVMC_CONFIG_WEN_Wen (0x01UL) /*!< Write enabled. */ +#define NVMC_CONFIG_WEN_Een (0x02UL) /*!< Erase enabled. */ + +/* Register: NVMC_ERASEALL */ +/* Description: Register for erasing all non-volatile user memory. */ + +/* Bit 0 : Starts the erasing of all user NVM (code region 0/1 and UICR registers). */ +#define NVMC_ERASEALL_ERASEALL_Pos (0UL) /*!< Position of ERASEALL field. */ +#define NVMC_ERASEALL_ERASEALL_Msk (0x1UL << NVMC_ERASEALL_ERASEALL_Pos) /*!< Bit mask of ERASEALL field. */ +#define NVMC_ERASEALL_ERASEALL_NoOperation (0UL) /*!< No operation. */ +#define NVMC_ERASEALL_ERASEALL_Erase (1UL) /*!< Start chip erase. */ + +/* Register: NVMC_ERASEUICR */ +/* Description: Register for start erasing User Information Congfiguration Registers. */ + +/* Bit 0 : It can only be used when all contents of code region 1 are erased. */ +#define NVMC_ERASEUICR_ERASEUICR_Pos (0UL) /*!< Position of ERASEUICR field. */ +#define NVMC_ERASEUICR_ERASEUICR_Msk (0x1UL << NVMC_ERASEUICR_ERASEUICR_Pos) /*!< Bit mask of ERASEUICR field. */ +#define NVMC_ERASEUICR_ERASEUICR_NoOperation (0UL) /*!< No operation. */ +#define NVMC_ERASEUICR_ERASEUICR_Erase (1UL) /*!< Start UICR erase. */ + + +/* Peripheral: POWER */ +/* Description: Power Control. */ + +/* Register: POWER_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on POFWARN event. */ +#define POWER_INTENSET_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ +#define POWER_INTENSET_POFWARN_Msk (0x1UL << POWER_INTENSET_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ +#define POWER_INTENSET_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ +#define POWER_INTENSET_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ +#define POWER_INTENSET_POFWARN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: POWER_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on POFWARN event. */ +#define POWER_INTENCLR_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ +#define POWER_INTENCLR_POFWARN_Msk (0x1UL << POWER_INTENCLR_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ +#define POWER_INTENCLR_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ +#define POWER_INTENCLR_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ +#define POWER_INTENCLR_POFWARN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: POWER_RESETREAS */ +/* Description: Reset reason. */ + +/* Bit 18 : Reset from wake-up from OFF mode detected by entering into debug interface mode. */ +#define POWER_RESETREAS_DIF_Pos (18UL) /*!< Position of DIF field. */ +#define POWER_RESETREAS_DIF_Msk (0x1UL << POWER_RESETREAS_DIF_Pos) /*!< Bit mask of DIF field. */ + +/* Bit 17 : Reset from wake-up from OFF mode detected by the use of ANADETECT signal from LPCOMP. */ +#define POWER_RESETREAS_LPCOMP_Pos (17UL) /*!< Position of LPCOMP field. */ +#define POWER_RESETREAS_LPCOMP_Msk (0x1UL << POWER_RESETREAS_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ + +/* Bit 16 : Reset from wake-up from OFF mode detected by the use of DETECT signal from GPIO. */ +#define POWER_RESETREAS_OFF_Pos (16UL) /*!< Position of OFF field. */ +#define POWER_RESETREAS_OFF_Msk (0x1UL << POWER_RESETREAS_OFF_Pos) /*!< Bit mask of OFF field. */ + +/* Bit 3 : Reset from CPU lock-up detected. */ +#define POWER_RESETREAS_LOCKUP_Pos (3UL) /*!< Position of LOCKUP field. */ +#define POWER_RESETREAS_LOCKUP_Msk (0x1UL << POWER_RESETREAS_LOCKUP_Pos) /*!< Bit mask of LOCKUP field. */ + +/* Bit 2 : Reset from AIRCR.SYSRESETREQ detected. */ +#define POWER_RESETREAS_SREQ_Pos (2UL) /*!< Position of SREQ field. */ +#define POWER_RESETREAS_SREQ_Msk (0x1UL << POWER_RESETREAS_SREQ_Pos) /*!< Bit mask of SREQ field. */ + +/* Bit 1 : Reset from watchdog detected. */ +#define POWER_RESETREAS_DOG_Pos (1UL) /*!< Position of DOG field. */ +#define POWER_RESETREAS_DOG_Msk (0x1UL << POWER_RESETREAS_DOG_Pos) /*!< Bit mask of DOG field. */ + +/* Bit 0 : Reset from pin-reset detected. */ +#define POWER_RESETREAS_RESETPIN_Pos (0UL) /*!< Position of RESETPIN field. */ +#define POWER_RESETREAS_RESETPIN_Msk (0x1UL << POWER_RESETREAS_RESETPIN_Pos) /*!< Bit mask of RESETPIN field. */ + +/* Register: POWER_SYSTEMOFF */ +/* Description: System off register. */ + +/* Bit 0 : Enter system off mode. */ +#define POWER_SYSTEMOFF_SYSTEMOFF_Pos (0UL) /*!< Position of SYSTEMOFF field. */ +#define POWER_SYSTEMOFF_SYSTEMOFF_Msk (0x1UL << POWER_SYSTEMOFF_SYSTEMOFF_Pos) /*!< Bit mask of SYSTEMOFF field. */ +#define POWER_SYSTEMOFF_SYSTEMOFF_Enter (1UL) /*!< Enter system off mode. */ + +/* Register: POWER_POFCON */ +/* Description: Power failure configuration. */ + +/* Bits 2..1 : Set threshold level. */ +#define POWER_POFCON_THRESHOLD_Pos (1UL) /*!< Position of THRESHOLD field. */ +#define POWER_POFCON_THRESHOLD_Msk (0x3UL << POWER_POFCON_THRESHOLD_Pos) /*!< Bit mask of THRESHOLD field. */ +#define POWER_POFCON_THRESHOLD_V21 (0x00UL) /*!< Set threshold to 2.1Volts. */ +#define POWER_POFCON_THRESHOLD_V23 (0x01UL) /*!< Set threshold to 2.3Volts. */ +#define POWER_POFCON_THRESHOLD_V25 (0x02UL) /*!< Set threshold to 2.5Volts. */ +#define POWER_POFCON_THRESHOLD_V27 (0x03UL) /*!< Set threshold to 2.7Volts. */ + +/* Bit 0 : Power failure comparator enable. */ +#define POWER_POFCON_POF_Pos (0UL) /*!< Position of POF field. */ +#define POWER_POFCON_POF_Msk (0x1UL << POWER_POFCON_POF_Pos) /*!< Bit mask of POF field. */ +#define POWER_POFCON_POF_Disabled (0UL) /*!< Disabled. */ +#define POWER_POFCON_POF_Enabled (1UL) /*!< Enabled. */ + +/* Register: POWER_GPREGRET */ +/* Description: General purpose retention register. This register is a retained register. */ + +/* Bits 7..0 : General purpose retention register. */ +#define POWER_GPREGRET_GPREGRET_Pos (0UL) /*!< Position of GPREGRET field. */ +#define POWER_GPREGRET_GPREGRET_Msk (0xFFUL << POWER_GPREGRET_GPREGRET_Pos) /*!< Bit mask of GPREGRET field. */ + +/* Register: POWER_RAMON */ +/* Description: Ram on/off. */ + +/* Bit 19 : RAM block 3 behaviour in OFF mode. */ +#define POWER_RAMON_OFFRAM3_Pos (19UL) /*!< Position of OFFRAM3 field. */ +#define POWER_RAMON_OFFRAM3_Msk (0x1UL << POWER_RAMON_OFFRAM3_Pos) /*!< Bit mask of OFFRAM3 field. */ +#define POWER_RAMON_OFFRAM3_RAM3Off (0UL) /*!< RAM block 3 OFF in OFF mode. */ +#define POWER_RAMON_OFFRAM3_RAM3On (1UL) /*!< RAM block 3 ON in OFF mode. */ + +/* Bit 18 : RAM block 2 behaviour in OFF mode. */ +#define POWER_RAMON_OFFRAM2_Pos (18UL) /*!< Position of OFFRAM2 field. */ +#define POWER_RAMON_OFFRAM2_Msk (0x1UL << POWER_RAMON_OFFRAM2_Pos) /*!< Bit mask of OFFRAM2 field. */ +#define POWER_RAMON_OFFRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in OFF mode. */ +#define POWER_RAMON_OFFRAM2_RAM2On (1UL) /*!< RAM block 2 ON in OFF mode. */ + +/* Bit 17 : RAM block 1 behaviour in OFF mode. */ +#define POWER_RAMON_OFFRAM1_Pos (17UL) /*!< Position of OFFRAM1 field. */ +#define POWER_RAMON_OFFRAM1_Msk (0x1UL << POWER_RAMON_OFFRAM1_Pos) /*!< Bit mask of OFFRAM1 field. */ +#define POWER_RAMON_OFFRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in OFF mode. */ +#define POWER_RAMON_OFFRAM1_RAM1On (1UL) /*!< RAM block 1 ON in OFF mode. */ + +/* Bit 16 : RAM block 0 behaviour in OFF mode. */ +#define POWER_RAMON_OFFRAM0_Pos (16UL) /*!< Position of OFFRAM0 field. */ +#define POWER_RAMON_OFFRAM0_Msk (0x1UL << POWER_RAMON_OFFRAM0_Pos) /*!< Bit mask of OFFRAM0 field. */ +#define POWER_RAMON_OFFRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in OFF mode. */ +#define POWER_RAMON_OFFRAM0_RAM0On (1UL) /*!< RAM block 0 ON in OFF mode. */ + +/* Bit 3 : RAM block 3 behaviour in ON mode. */ +#define POWER_RAMON_ONRAM3_Pos (3UL) /*!< Position of ONRAM3 field. */ +#define POWER_RAMON_ONRAM3_Msk (0x1UL << POWER_RAMON_ONRAM3_Pos) /*!< Bit mask of ONRAM3 field. */ +#define POWER_RAMON_ONRAM3_RAM3Off (0UL) /*!< RAM block 3 OFF in ON mode. */ +#define POWER_RAMON_ONRAM3_RAM3On (1UL) /*!< RAM block 3 ON in ON mode. */ + +/* Bit 2 : RAM block 2 behaviour in ON mode. */ +#define POWER_RAMON_ONRAM2_Pos (2UL) /*!< Position of ONRAM2 field. */ +#define POWER_RAMON_ONRAM2_Msk (0x1UL << POWER_RAMON_ONRAM2_Pos) /*!< Bit mask of ONRAM2 field. */ +#define POWER_RAMON_ONRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in ON mode. */ +#define POWER_RAMON_ONRAM2_RAM2On (1UL) /*!< RAM block 2 ON in ON mode. */ + +/* Bit 1 : RAM block 1 behaviour in ON mode. */ +#define POWER_RAMON_ONRAM1_Pos (1UL) /*!< Position of ONRAM1 field. */ +#define POWER_RAMON_ONRAM1_Msk (0x1UL << POWER_RAMON_ONRAM1_Pos) /*!< Bit mask of ONRAM1 field. */ +#define POWER_RAMON_ONRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in ON mode. */ +#define POWER_RAMON_ONRAM1_RAM1On (1UL) /*!< RAM block 1 ON in ON mode. */ + +/* Bit 0 : RAM block 0 behaviour in ON mode. */ +#define POWER_RAMON_ONRAM0_Pos (0UL) /*!< Position of ONRAM0 field. */ +#define POWER_RAMON_ONRAM0_Msk (0x1UL << POWER_RAMON_ONRAM0_Pos) /*!< Bit mask of ONRAM0 field. */ +#define POWER_RAMON_ONRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in ON mode. */ +#define POWER_RAMON_ONRAM0_RAM0On (1UL) /*!< RAM block 0 ON in ON mode. */ + +/* Register: POWER_RESET */ +/* Description: Pin reset functionality configuration register. This register is a retained register. */ + +/* Bit 0 : Enable pin reset in debug interface mode. */ +#define POWER_RESET_RESET_Pos (0UL) /*!< Position of RESET field. */ +#define POWER_RESET_RESET_Msk (0x1UL << POWER_RESET_RESET_Pos) /*!< Bit mask of RESET field. */ +#define POWER_RESET_RESET_Disabled (0UL) /*!< Pin reset in debug interface mode disabled. */ +#define POWER_RESET_RESET_Enabled (1UL) /*!< Pin reset in debug interface mode enabled. */ + +/* Register: POWER_DCDCEN */ +/* Description: DCDC converter enable configuration register. */ + +/* Bit 0 : Enable DCDC converter. */ +#define POWER_DCDCEN_DCDCEN_Pos (0UL) /*!< Position of DCDCEN field. */ +#define POWER_DCDCEN_DCDCEN_Msk (0x1UL << POWER_DCDCEN_DCDCEN_Pos) /*!< Bit mask of DCDCEN field. */ +#define POWER_DCDCEN_DCDCEN_Disabled (0UL) /*!< DCDC converter disabled. */ +#define POWER_DCDCEN_DCDCEN_Enabled (1UL) /*!< DCDC converter enabled. */ + + +/* Peripheral: PPI */ +/* Description: PPI controller. */ + +/* Register: PPI_CHEN */ +/* Description: Channel enable. */ + +/* Bit 31 : Enable PPI channel 31. */ +#define PPI_CHEN_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHEN_CH31_Msk (0x1UL << PPI_CHEN_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHEN_CH31_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH31_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 30 : Enable PPI channel 30. */ +#define PPI_CHEN_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHEN_CH30_Msk (0x1UL << PPI_CHEN_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHEN_CH30_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH30_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 29 : Enable PPI channel 29. */ +#define PPI_CHEN_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHEN_CH29_Msk (0x1UL << PPI_CHEN_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHEN_CH29_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH29_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 28 : Enable PPI channel 28. */ +#define PPI_CHEN_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHEN_CH28_Msk (0x1UL << PPI_CHEN_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHEN_CH28_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH28_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 27 : Enable PPI channel 27. */ +#define PPI_CHEN_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHEN_CH27_Msk (0x1UL << PPI_CHEN_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHEN_CH27_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH27_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 26 : Enable PPI channel 26. */ +#define PPI_CHEN_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHEN_CH26_Msk (0x1UL << PPI_CHEN_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHEN_CH26_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH26_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 25 : Enable PPI channel 25. */ +#define PPI_CHEN_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHEN_CH25_Msk (0x1UL << PPI_CHEN_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHEN_CH25_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH25_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 24 : Enable PPI channel 24. */ +#define PPI_CHEN_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHEN_CH24_Msk (0x1UL << PPI_CHEN_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHEN_CH24_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH24_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 23 : Enable PPI channel 23. */ +#define PPI_CHEN_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHEN_CH23_Msk (0x1UL << PPI_CHEN_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHEN_CH23_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH23_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 22 : Enable PPI channel 22. */ +#define PPI_CHEN_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHEN_CH22_Msk (0x1UL << PPI_CHEN_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHEN_CH22_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH22_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 21 : Enable PPI channel 21. */ +#define PPI_CHEN_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHEN_CH21_Msk (0x1UL << PPI_CHEN_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHEN_CH21_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH21_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 20 : Enable PPI channel 20. */ +#define PPI_CHEN_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHEN_CH20_Msk (0x1UL << PPI_CHEN_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHEN_CH20_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH20_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 15 : Enable PPI channel 15. */ +#define PPI_CHEN_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHEN_CH15_Msk (0x1UL << PPI_CHEN_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHEN_CH15_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH15_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 14 : Enable PPI channel 14. */ +#define PPI_CHEN_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHEN_CH14_Msk (0x1UL << PPI_CHEN_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHEN_CH14_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH14_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 13 : Enable PPI channel 13. */ +#define PPI_CHEN_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHEN_CH13_Msk (0x1UL << PPI_CHEN_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHEN_CH13_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH13_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 12 : Enable PPI channel 12. */ +#define PPI_CHEN_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHEN_CH12_Msk (0x1UL << PPI_CHEN_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHEN_CH12_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH12_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 11 : Enable PPI channel 11. */ +#define PPI_CHEN_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHEN_CH11_Msk (0x1UL << PPI_CHEN_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHEN_CH11_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH11_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 10 : Enable PPI channel 10. */ +#define PPI_CHEN_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHEN_CH10_Msk (0x1UL << PPI_CHEN_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHEN_CH10_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH10_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 9 : Enable PPI channel 9. */ +#define PPI_CHEN_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHEN_CH9_Msk (0x1UL << PPI_CHEN_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHEN_CH9_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH9_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 8 : Enable PPI channel 8. */ +#define PPI_CHEN_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHEN_CH8_Msk (0x1UL << PPI_CHEN_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHEN_CH8_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH8_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 7 : Enable PPI channel 7. */ +#define PPI_CHEN_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHEN_CH7_Msk (0x1UL << PPI_CHEN_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHEN_CH7_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH7_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 6 : Enable PPI channel 6. */ +#define PPI_CHEN_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHEN_CH6_Msk (0x1UL << PPI_CHEN_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHEN_CH6_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH6_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 5 : Enable PPI channel 5. */ +#define PPI_CHEN_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHEN_CH5_Msk (0x1UL << PPI_CHEN_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHEN_CH5_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH5_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 4 : Enable PPI channel 4. */ +#define PPI_CHEN_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHEN_CH4_Msk (0x1UL << PPI_CHEN_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHEN_CH4_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH4_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 3 : Enable PPI channel 3. */ +#define PPI_CHEN_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHEN_CH3_Msk (0x1UL << PPI_CHEN_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHEN_CH3_Disabled (0UL) /*!< Channel disabled */ +#define PPI_CHEN_CH3_Enabled (1UL) /*!< Channel enabled */ + +/* Bit 2 : Enable PPI channel 2. */ +#define PPI_CHEN_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHEN_CH2_Msk (0x1UL << PPI_CHEN_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHEN_CH2_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH2_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 1 : Enable PPI channel 1. */ +#define PPI_CHEN_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHEN_CH1_Msk (0x1UL << PPI_CHEN_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHEN_CH1_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH1_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 0 : Enable PPI channel 0. */ +#define PPI_CHEN_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHEN_CH0_Msk (0x1UL << PPI_CHEN_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHEN_CH0_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH0_Enabled (1UL) /*!< Channel enabled. */ + +/* Register: PPI_CHENSET */ +/* Description: Channel enable set. */ + +/* Bit 31 : Enable PPI channel 31. */ +#define PPI_CHENSET_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHENSET_CH31_Msk (0x1UL << PPI_CHENSET_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHENSET_CH31_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH31_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH31_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 30 : Enable PPI channel 30. */ +#define PPI_CHENSET_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHENSET_CH30_Msk (0x1UL << PPI_CHENSET_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHENSET_CH30_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH30_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH30_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 29 : Enable PPI channel 29. */ +#define PPI_CHENSET_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHENSET_CH29_Msk (0x1UL << PPI_CHENSET_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHENSET_CH29_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH29_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH29_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 28 : Enable PPI channel 28. */ +#define PPI_CHENSET_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHENSET_CH28_Msk (0x1UL << PPI_CHENSET_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHENSET_CH28_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH28_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH28_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 27 : Enable PPI channel 27. */ +#define PPI_CHENSET_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHENSET_CH27_Msk (0x1UL << PPI_CHENSET_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHENSET_CH27_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH27_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH27_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 26 : Enable PPI channel 26. */ +#define PPI_CHENSET_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHENSET_CH26_Msk (0x1UL << PPI_CHENSET_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHENSET_CH26_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH26_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH26_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 25 : Enable PPI channel 25. */ +#define PPI_CHENSET_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHENSET_CH25_Msk (0x1UL << PPI_CHENSET_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHENSET_CH25_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH25_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH25_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 24 : Enable PPI channel 24. */ +#define PPI_CHENSET_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHENSET_CH24_Msk (0x1UL << PPI_CHENSET_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHENSET_CH24_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH24_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH24_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 23 : Enable PPI channel 23. */ +#define PPI_CHENSET_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHENSET_CH23_Msk (0x1UL << PPI_CHENSET_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHENSET_CH23_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH23_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH23_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 22 : Enable PPI channel 22. */ +#define PPI_CHENSET_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHENSET_CH22_Msk (0x1UL << PPI_CHENSET_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHENSET_CH22_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH22_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH22_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 21 : Enable PPI channel 21. */ +#define PPI_CHENSET_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHENSET_CH21_Msk (0x1UL << PPI_CHENSET_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHENSET_CH21_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH21_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH21_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 20 : Enable PPI channel 20. */ +#define PPI_CHENSET_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHENSET_CH20_Msk (0x1UL << PPI_CHENSET_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHENSET_CH20_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH20_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH20_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 15 : Enable PPI channel 15. */ +#define PPI_CHENSET_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHENSET_CH15_Msk (0x1UL << PPI_CHENSET_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHENSET_CH15_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH15_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH15_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 14 : Enable PPI channel 14. */ +#define PPI_CHENSET_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHENSET_CH14_Msk (0x1UL << PPI_CHENSET_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHENSET_CH14_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH14_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH14_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 13 : Enable PPI channel 13. */ +#define PPI_CHENSET_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHENSET_CH13_Msk (0x1UL << PPI_CHENSET_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHENSET_CH13_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH13_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH13_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 12 : Enable PPI channel 12. */ +#define PPI_CHENSET_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHENSET_CH12_Msk (0x1UL << PPI_CHENSET_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHENSET_CH12_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH12_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH12_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 11 : Enable PPI channel 11. */ +#define PPI_CHENSET_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHENSET_CH11_Msk (0x1UL << PPI_CHENSET_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHENSET_CH11_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH11_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH11_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 10 : Enable PPI channel 10. */ +#define PPI_CHENSET_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHENSET_CH10_Msk (0x1UL << PPI_CHENSET_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHENSET_CH10_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH10_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH10_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 9 : Enable PPI channel 9. */ +#define PPI_CHENSET_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHENSET_CH9_Msk (0x1UL << PPI_CHENSET_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHENSET_CH9_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH9_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH9_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 8 : Enable PPI channel 8. */ +#define PPI_CHENSET_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHENSET_CH8_Msk (0x1UL << PPI_CHENSET_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHENSET_CH8_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH8_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH8_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 7 : Enable PPI channel 7. */ +#define PPI_CHENSET_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHENSET_CH7_Msk (0x1UL << PPI_CHENSET_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHENSET_CH7_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH7_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH7_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 6 : Enable PPI channel 6. */ +#define PPI_CHENSET_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHENSET_CH6_Msk (0x1UL << PPI_CHENSET_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHENSET_CH6_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH6_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH6_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 5 : Enable PPI channel 5. */ +#define PPI_CHENSET_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHENSET_CH5_Msk (0x1UL << PPI_CHENSET_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHENSET_CH5_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH5_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH5_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 4 : Enable PPI channel 4. */ +#define PPI_CHENSET_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHENSET_CH4_Msk (0x1UL << PPI_CHENSET_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHENSET_CH4_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH4_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH4_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 3 : Enable PPI channel 3. */ +#define PPI_CHENSET_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHENSET_CH3_Msk (0x1UL << PPI_CHENSET_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHENSET_CH3_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH3_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH3_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 2 : Enable PPI channel 2. */ +#define PPI_CHENSET_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHENSET_CH2_Msk (0x1UL << PPI_CHENSET_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHENSET_CH2_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH2_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH2_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 1 : Enable PPI channel 1. */ +#define PPI_CHENSET_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHENSET_CH1_Msk (0x1UL << PPI_CHENSET_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHENSET_CH1_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH1_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH1_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 0 : Enable PPI channel 0. */ +#define PPI_CHENSET_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHENSET_CH0_Msk (0x1UL << PPI_CHENSET_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHENSET_CH0_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH0_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH0_Set (1UL) /*!< Enable channel on write. */ + +/* Register: PPI_CHENCLR */ +/* Description: Channel enable clear. */ + +/* Bit 31 : Disable PPI channel 31. */ +#define PPI_CHENCLR_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHENCLR_CH31_Msk (0x1UL << PPI_CHENCLR_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHENCLR_CH31_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH31_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH31_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 30 : Disable PPI channel 30. */ +#define PPI_CHENCLR_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHENCLR_CH30_Msk (0x1UL << PPI_CHENCLR_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHENCLR_CH30_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH30_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH30_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 29 : Disable PPI channel 29. */ +#define PPI_CHENCLR_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHENCLR_CH29_Msk (0x1UL << PPI_CHENCLR_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHENCLR_CH29_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH29_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH29_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 28 : Disable PPI channel 28. */ +#define PPI_CHENCLR_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHENCLR_CH28_Msk (0x1UL << PPI_CHENCLR_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHENCLR_CH28_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH28_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH28_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 27 : Disable PPI channel 27. */ +#define PPI_CHENCLR_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHENCLR_CH27_Msk (0x1UL << PPI_CHENCLR_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHENCLR_CH27_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH27_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH27_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 26 : Disable PPI channel 26. */ +#define PPI_CHENCLR_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHENCLR_CH26_Msk (0x1UL << PPI_CHENCLR_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHENCLR_CH26_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH26_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH26_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 25 : Disable PPI channel 25. */ +#define PPI_CHENCLR_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHENCLR_CH25_Msk (0x1UL << PPI_CHENCLR_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHENCLR_CH25_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH25_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH25_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 24 : Disable PPI channel 24. */ +#define PPI_CHENCLR_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHENCLR_CH24_Msk (0x1UL << PPI_CHENCLR_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHENCLR_CH24_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH24_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH24_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 23 : Disable PPI channel 23. */ +#define PPI_CHENCLR_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHENCLR_CH23_Msk (0x1UL << PPI_CHENCLR_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHENCLR_CH23_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH23_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH23_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 22 : Disable PPI channel 22. */ +#define PPI_CHENCLR_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHENCLR_CH22_Msk (0x1UL << PPI_CHENCLR_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHENCLR_CH22_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH22_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH22_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 21 : Disable PPI channel 21. */ +#define PPI_CHENCLR_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHENCLR_CH21_Msk (0x1UL << PPI_CHENCLR_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHENCLR_CH21_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH21_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH21_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 20 : Disable PPI channel 20. */ +#define PPI_CHENCLR_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHENCLR_CH20_Msk (0x1UL << PPI_CHENCLR_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHENCLR_CH20_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH20_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH20_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 15 : Disable PPI channel 15. */ +#define PPI_CHENCLR_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHENCLR_CH15_Msk (0x1UL << PPI_CHENCLR_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHENCLR_CH15_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH15_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH15_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 14 : Disable PPI channel 14. */ +#define PPI_CHENCLR_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHENCLR_CH14_Msk (0x1UL << PPI_CHENCLR_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHENCLR_CH14_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH14_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH14_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 13 : Disable PPI channel 13. */ +#define PPI_CHENCLR_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHENCLR_CH13_Msk (0x1UL << PPI_CHENCLR_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHENCLR_CH13_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH13_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH13_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 12 : Disable PPI channel 12. */ +#define PPI_CHENCLR_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHENCLR_CH12_Msk (0x1UL << PPI_CHENCLR_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHENCLR_CH12_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH12_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH12_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 11 : Disable PPI channel 11. */ +#define PPI_CHENCLR_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHENCLR_CH11_Msk (0x1UL << PPI_CHENCLR_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHENCLR_CH11_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH11_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH11_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 10 : Disable PPI channel 10. */ +#define PPI_CHENCLR_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHENCLR_CH10_Msk (0x1UL << PPI_CHENCLR_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHENCLR_CH10_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH10_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH10_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 9 : Disable PPI channel 9. */ +#define PPI_CHENCLR_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHENCLR_CH9_Msk (0x1UL << PPI_CHENCLR_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHENCLR_CH9_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH9_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH9_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 8 : Disable PPI channel 8. */ +#define PPI_CHENCLR_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHENCLR_CH8_Msk (0x1UL << PPI_CHENCLR_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHENCLR_CH8_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH8_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH8_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 7 : Disable PPI channel 7. */ +#define PPI_CHENCLR_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHENCLR_CH7_Msk (0x1UL << PPI_CHENCLR_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHENCLR_CH7_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH7_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH7_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 6 : Disable PPI channel 6. */ +#define PPI_CHENCLR_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHENCLR_CH6_Msk (0x1UL << PPI_CHENCLR_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHENCLR_CH6_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH6_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH6_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 5 : Disable PPI channel 5. */ +#define PPI_CHENCLR_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHENCLR_CH5_Msk (0x1UL << PPI_CHENCLR_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHENCLR_CH5_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH5_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH5_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 4 : Disable PPI channel 4. */ +#define PPI_CHENCLR_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHENCLR_CH4_Msk (0x1UL << PPI_CHENCLR_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHENCLR_CH4_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH4_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH4_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 3 : Disable PPI channel 3. */ +#define PPI_CHENCLR_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHENCLR_CH3_Msk (0x1UL << PPI_CHENCLR_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHENCLR_CH3_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH3_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH3_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 2 : Disable PPI channel 2. */ +#define PPI_CHENCLR_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHENCLR_CH2_Msk (0x1UL << PPI_CHENCLR_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHENCLR_CH2_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH2_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH2_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 1 : Disable PPI channel 1. */ +#define PPI_CHENCLR_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHENCLR_CH1_Msk (0x1UL << PPI_CHENCLR_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHENCLR_CH1_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH1_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH1_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 0 : Disable PPI channel 0. */ +#define PPI_CHENCLR_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHENCLR_CH0_Msk (0x1UL << PPI_CHENCLR_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHENCLR_CH0_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH0_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH0_Clear (1UL) /*!< Disable channel on write. */ + +/* Register: PPI_CHG */ +/* Description: Channel group configuration. */ + +/* Bit 31 : Include CH31 in channel group. */ +#define PPI_CHG_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHG_CH31_Msk (0x1UL << PPI_CHG_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHG_CH31_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH31_Included (1UL) /*!< Channel included. */ + +/* Bit 30 : Include CH30 in channel group. */ +#define PPI_CHG_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHG_CH30_Msk (0x1UL << PPI_CHG_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHG_CH30_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH30_Included (1UL) /*!< Channel included. */ + +/* Bit 29 : Include CH29 in channel group. */ +#define PPI_CHG_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHG_CH29_Msk (0x1UL << PPI_CHG_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHG_CH29_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH29_Included (1UL) /*!< Channel included. */ + +/* Bit 28 : Include CH28 in channel group. */ +#define PPI_CHG_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHG_CH28_Msk (0x1UL << PPI_CHG_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHG_CH28_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH28_Included (1UL) /*!< Channel included. */ + +/* Bit 27 : Include CH27 in channel group. */ +#define PPI_CHG_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHG_CH27_Msk (0x1UL << PPI_CHG_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHG_CH27_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH27_Included (1UL) /*!< Channel included. */ + +/* Bit 26 : Include CH26 in channel group. */ +#define PPI_CHG_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHG_CH26_Msk (0x1UL << PPI_CHG_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHG_CH26_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH26_Included (1UL) /*!< Channel included. */ + +/* Bit 25 : Include CH25 in channel group. */ +#define PPI_CHG_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHG_CH25_Msk (0x1UL << PPI_CHG_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHG_CH25_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH25_Included (1UL) /*!< Channel included. */ + +/* Bit 24 : Include CH24 in channel group. */ +#define PPI_CHG_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHG_CH24_Msk (0x1UL << PPI_CHG_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHG_CH24_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH24_Included (1UL) /*!< Channel included. */ + +/* Bit 23 : Include CH23 in channel group. */ +#define PPI_CHG_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHG_CH23_Msk (0x1UL << PPI_CHG_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHG_CH23_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH23_Included (1UL) /*!< Channel included. */ + +/* Bit 22 : Include CH22 in channel group. */ +#define PPI_CHG_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHG_CH22_Msk (0x1UL << PPI_CHG_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHG_CH22_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH22_Included (1UL) /*!< Channel included. */ + +/* Bit 21 : Include CH21 in channel group. */ +#define PPI_CHG_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHG_CH21_Msk (0x1UL << PPI_CHG_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHG_CH21_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH21_Included (1UL) /*!< Channel included. */ + +/* Bit 20 : Include CH20 in channel group. */ +#define PPI_CHG_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHG_CH20_Msk (0x1UL << PPI_CHG_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHG_CH20_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH20_Included (1UL) /*!< Channel included. */ + +/* Bit 15 : Include CH15 in channel group. */ +#define PPI_CHG_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHG_CH15_Msk (0x1UL << PPI_CHG_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHG_CH15_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH15_Included (1UL) /*!< Channel included. */ + +/* Bit 14 : Include CH14 in channel group. */ +#define PPI_CHG_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHG_CH14_Msk (0x1UL << PPI_CHG_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHG_CH14_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH14_Included (1UL) /*!< Channel included. */ + +/* Bit 13 : Include CH13 in channel group. */ +#define PPI_CHG_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHG_CH13_Msk (0x1UL << PPI_CHG_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHG_CH13_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH13_Included (1UL) /*!< Channel included. */ + +/* Bit 12 : Include CH12 in channel group. */ +#define PPI_CHG_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHG_CH12_Msk (0x1UL << PPI_CHG_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHG_CH12_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH12_Included (1UL) /*!< Channel included. */ + +/* Bit 11 : Include CH11 in channel group. */ +#define PPI_CHG_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHG_CH11_Msk (0x1UL << PPI_CHG_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHG_CH11_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH11_Included (1UL) /*!< Channel included. */ + +/* Bit 10 : Include CH10 in channel group. */ +#define PPI_CHG_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHG_CH10_Msk (0x1UL << PPI_CHG_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHG_CH10_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH10_Included (1UL) /*!< Channel included. */ + +/* Bit 9 : Include CH9 in channel group. */ +#define PPI_CHG_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHG_CH9_Msk (0x1UL << PPI_CHG_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHG_CH9_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH9_Included (1UL) /*!< Channel included. */ + +/* Bit 8 : Include CH8 in channel group. */ +#define PPI_CHG_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHG_CH8_Msk (0x1UL << PPI_CHG_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHG_CH8_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH8_Included (1UL) /*!< Channel included. */ + +/* Bit 7 : Include CH7 in channel group. */ +#define PPI_CHG_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHG_CH7_Msk (0x1UL << PPI_CHG_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHG_CH7_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH7_Included (1UL) /*!< Channel included. */ + +/* Bit 6 : Include CH6 in channel group. */ +#define PPI_CHG_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHG_CH6_Msk (0x1UL << PPI_CHG_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHG_CH6_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH6_Included (1UL) /*!< Channel included. */ + +/* Bit 5 : Include CH5 in channel group. */ +#define PPI_CHG_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHG_CH5_Msk (0x1UL << PPI_CHG_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHG_CH5_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH5_Included (1UL) /*!< Channel included. */ + +/* Bit 4 : Include CH4 in channel group. */ +#define PPI_CHG_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHG_CH4_Msk (0x1UL << PPI_CHG_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHG_CH4_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH4_Included (1UL) /*!< Channel included. */ + +/* Bit 3 : Include CH3 in channel group. */ +#define PPI_CHG_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHG_CH3_Msk (0x1UL << PPI_CHG_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHG_CH3_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH3_Included (1UL) /*!< Channel included. */ + +/* Bit 2 : Include CH2 in channel group. */ +#define PPI_CHG_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHG_CH2_Msk (0x1UL << PPI_CHG_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHG_CH2_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH2_Included (1UL) /*!< Channel included. */ + +/* Bit 1 : Include CH1 in channel group. */ +#define PPI_CHG_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHG_CH1_Msk (0x1UL << PPI_CHG_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHG_CH1_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH1_Included (1UL) /*!< Channel included. */ + +/* Bit 0 : Include CH0 in channel group. */ +#define PPI_CHG_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHG_CH0_Msk (0x1UL << PPI_CHG_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHG_CH0_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH0_Included (1UL) /*!< Channel included. */ + + +/* Peripheral: PU */ +/* Description: Patch unit. */ + +/* Register: PU_PATCHADDR */ +/* Description: Relative address of patch instructions. */ + +/* Bits 24..0 : Relative address of patch instructions. */ +#define PU_PATCHADDR_PATCHADDR_Pos (0UL) /*!< Position of PATCHADDR field. */ +#define PU_PATCHADDR_PATCHADDR_Msk (0x1FFFFFFUL << PU_PATCHADDR_PATCHADDR_Pos) /*!< Bit mask of PATCHADDR field. */ + +/* Register: PU_PATCHEN */ +/* Description: Patch enable register. */ + +/* Bit 7 : Patch 7 enabled. */ +#define PU_PATCHEN_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ +#define PU_PATCHEN_PATCH7_Msk (0x1UL << PU_PATCHEN_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ +#define PU_PATCHEN_PATCH7_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH7_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 6 : Patch 6 enabled. */ +#define PU_PATCHEN_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ +#define PU_PATCHEN_PATCH6_Msk (0x1UL << PU_PATCHEN_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ +#define PU_PATCHEN_PATCH6_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH6_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 5 : Patch 5 enabled. */ +#define PU_PATCHEN_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ +#define PU_PATCHEN_PATCH5_Msk (0x1UL << PU_PATCHEN_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ +#define PU_PATCHEN_PATCH5_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH5_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 4 : Patch 4 enabled. */ +#define PU_PATCHEN_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ +#define PU_PATCHEN_PATCH4_Msk (0x1UL << PU_PATCHEN_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ +#define PU_PATCHEN_PATCH4_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH4_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 3 : Patch 3 enabled. */ +#define PU_PATCHEN_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ +#define PU_PATCHEN_PATCH3_Msk (0x1UL << PU_PATCHEN_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ +#define PU_PATCHEN_PATCH3_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH3_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 2 : Patch 2 enabled. */ +#define PU_PATCHEN_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ +#define PU_PATCHEN_PATCH2_Msk (0x1UL << PU_PATCHEN_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ +#define PU_PATCHEN_PATCH2_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH2_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 1 : Patch 1 enabled. */ +#define PU_PATCHEN_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ +#define PU_PATCHEN_PATCH1_Msk (0x1UL << PU_PATCHEN_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ +#define PU_PATCHEN_PATCH1_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH1_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 0 : Patch 0 enabled. */ +#define PU_PATCHEN_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ +#define PU_PATCHEN_PATCH0_Msk (0x1UL << PU_PATCHEN_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ +#define PU_PATCHEN_PATCH0_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH0_Enabled (1UL) /*!< Patch enabled. */ + +/* Register: PU_PATCHENSET */ +/* Description: Patch enable register. */ + +/* Bit 7 : Patch 7 enabled. */ +#define PU_PATCHENSET_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ +#define PU_PATCHENSET_PATCH7_Msk (0x1UL << PU_PATCHENSET_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ +#define PU_PATCHENSET_PATCH7_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH7_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH7_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 6 : Patch 6 enabled. */ +#define PU_PATCHENSET_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ +#define PU_PATCHENSET_PATCH6_Msk (0x1UL << PU_PATCHENSET_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ +#define PU_PATCHENSET_PATCH6_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH6_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH6_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 5 : Patch 5 enabled. */ +#define PU_PATCHENSET_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ +#define PU_PATCHENSET_PATCH5_Msk (0x1UL << PU_PATCHENSET_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ +#define PU_PATCHENSET_PATCH5_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH5_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH5_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 4 : Patch 4 enabled. */ +#define PU_PATCHENSET_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ +#define PU_PATCHENSET_PATCH4_Msk (0x1UL << PU_PATCHENSET_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ +#define PU_PATCHENSET_PATCH4_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH4_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH4_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 3 : Patch 3 enabled. */ +#define PU_PATCHENSET_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ +#define PU_PATCHENSET_PATCH3_Msk (0x1UL << PU_PATCHENSET_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ +#define PU_PATCHENSET_PATCH3_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH3_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH3_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 2 : Patch 2 enabled. */ +#define PU_PATCHENSET_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ +#define PU_PATCHENSET_PATCH2_Msk (0x1UL << PU_PATCHENSET_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ +#define PU_PATCHENSET_PATCH2_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH2_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH2_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 1 : Patch 1 enabled. */ +#define PU_PATCHENSET_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ +#define PU_PATCHENSET_PATCH1_Msk (0x1UL << PU_PATCHENSET_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ +#define PU_PATCHENSET_PATCH1_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH1_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH1_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 0 : Patch 0 enabled. */ +#define PU_PATCHENSET_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ +#define PU_PATCHENSET_PATCH0_Msk (0x1UL << PU_PATCHENSET_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ +#define PU_PATCHENSET_PATCH0_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH0_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH0_Set (1UL) /*!< Enable patch on write. */ + +/* Register: PU_PATCHENCLR */ +/* Description: Patch disable register. */ + +/* Bit 7 : Patch 7 enabled. */ +#define PU_PATCHENCLR_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ +#define PU_PATCHENCLR_PATCH7_Msk (0x1UL << PU_PATCHENCLR_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ +#define PU_PATCHENCLR_PATCH7_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH7_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH7_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 6 : Patch 6 enabled. */ +#define PU_PATCHENCLR_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ +#define PU_PATCHENCLR_PATCH6_Msk (0x1UL << PU_PATCHENCLR_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ +#define PU_PATCHENCLR_PATCH6_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH6_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH6_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 5 : Patch 5 enabled. */ +#define PU_PATCHENCLR_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ +#define PU_PATCHENCLR_PATCH5_Msk (0x1UL << PU_PATCHENCLR_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ +#define PU_PATCHENCLR_PATCH5_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH5_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH5_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 4 : Patch 4 enabled. */ +#define PU_PATCHENCLR_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ +#define PU_PATCHENCLR_PATCH4_Msk (0x1UL << PU_PATCHENCLR_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ +#define PU_PATCHENCLR_PATCH4_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH4_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH4_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 3 : Patch 3 enabled. */ +#define PU_PATCHENCLR_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ +#define PU_PATCHENCLR_PATCH3_Msk (0x1UL << PU_PATCHENCLR_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ +#define PU_PATCHENCLR_PATCH3_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH3_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH3_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 2 : Patch 2 enabled. */ +#define PU_PATCHENCLR_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ +#define PU_PATCHENCLR_PATCH2_Msk (0x1UL << PU_PATCHENCLR_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ +#define PU_PATCHENCLR_PATCH2_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH2_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH2_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 1 : Patch 1 enabled. */ +#define PU_PATCHENCLR_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ +#define PU_PATCHENCLR_PATCH1_Msk (0x1UL << PU_PATCHENCLR_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ +#define PU_PATCHENCLR_PATCH1_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH1_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH1_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 0 : Patch 0 enabled. */ +#define PU_PATCHENCLR_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ +#define PU_PATCHENCLR_PATCH0_Msk (0x1UL << PU_PATCHENCLR_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ +#define PU_PATCHENCLR_PATCH0_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH0_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH0_Clear (1UL) /*!< Disable patch on write. */ + + +/* Peripheral: QDEC */ +/* Description: Rotary decoder. */ + +/* Register: QDEC_SHORTS */ +/* Description: Shortcut for the QDEC. */ + +/* Bit 1 : Short-cut between SAMPLERDY event and STOP task. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Pos (1UL) /*!< Position of SAMPLERDY_STOP field. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Msk (0x1UL << QDEC_SHORTS_SAMPLERDY_STOP_Pos) /*!< Bit mask of SAMPLERDY_STOP field. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Short-cut between REPORTRDY event and READCLRACC task. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Pos (0UL) /*!< Position of REPORTRDY_READCLRACC field. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_READCLRACC_Pos) /*!< Bit mask of REPORTRDY_READCLRACC field. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Disabled (0UL) /*!< Shortcut disabled. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: QDEC_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on ACCOF event. */ +#define QDEC_INTENSET_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ +#define QDEC_INTENSET_ACCOF_Msk (0x1UL << QDEC_INTENSET_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ +#define QDEC_INTENSET_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENSET_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENSET_ACCOF_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on REPORTRDY event. */ +#define QDEC_INTENSET_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ +#define QDEC_INTENSET_REPORTRDY_Msk (0x1UL << QDEC_INTENSET_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ +#define QDEC_INTENSET_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENSET_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENSET_REPORTRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on SAMPLERDY event. */ +#define QDEC_INTENSET_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ +#define QDEC_INTENSET_SAMPLERDY_Msk (0x1UL << QDEC_INTENSET_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ +#define QDEC_INTENSET_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENSET_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENSET_SAMPLERDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: QDEC_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on ACCOF event. */ +#define QDEC_INTENCLR_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ +#define QDEC_INTENCLR_ACCOF_Msk (0x1UL << QDEC_INTENCLR_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ +#define QDEC_INTENCLR_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENCLR_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENCLR_ACCOF_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on REPORTRDY event. */ +#define QDEC_INTENCLR_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ +#define QDEC_INTENCLR_REPORTRDY_Msk (0x1UL << QDEC_INTENCLR_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ +#define QDEC_INTENCLR_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENCLR_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENCLR_REPORTRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on SAMPLERDY event. */ +#define QDEC_INTENCLR_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ +#define QDEC_INTENCLR_SAMPLERDY_Msk (0x1UL << QDEC_INTENCLR_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ +#define QDEC_INTENCLR_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENCLR_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENCLR_SAMPLERDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: QDEC_ENABLE */ +/* Description: Enable the QDEC. */ + +/* Bit 0 : Enable or disable QDEC. */ +#define QDEC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define QDEC_ENABLE_ENABLE_Msk (0x1UL << QDEC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define QDEC_ENABLE_ENABLE_Disabled (0UL) /*!< Disabled QDEC. */ +#define QDEC_ENABLE_ENABLE_Enabled (1UL) /*!< Enable QDEC. */ + +/* Register: QDEC_LEDPOL */ +/* Description: LED output pin polarity. */ + +/* Bit 0 : LED output pin polarity. */ +#define QDEC_LEDPOL_LEDPOL_Pos (0UL) /*!< Position of LEDPOL field. */ +#define QDEC_LEDPOL_LEDPOL_Msk (0x1UL << QDEC_LEDPOL_LEDPOL_Pos) /*!< Bit mask of LEDPOL field. */ +#define QDEC_LEDPOL_LEDPOL_ActiveLow (0UL) /*!< LED output is active low. */ +#define QDEC_LEDPOL_LEDPOL_ActiveHigh (1UL) /*!< LED output is active high. */ + +/* Register: QDEC_SAMPLEPER */ +/* Description: Sample period. */ + +/* Bits 2..0 : Sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_Pos (0UL) /*!< Position of SAMPLEPER field. */ +#define QDEC_SAMPLEPER_SAMPLEPER_Msk (0x7UL << QDEC_SAMPLEPER_SAMPLEPER_Pos) /*!< Bit mask of SAMPLEPER field. */ +#define QDEC_SAMPLEPER_SAMPLEPER_128us (0x00UL) /*!< 128us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_256us (0x01UL) /*!< 256us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_512us (0x02UL) /*!< 512us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_1024us (0x03UL) /*!< 1024us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_2048us (0x04UL) /*!< 2048us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_4096us (0x05UL) /*!< 4096us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_8192us (0x06UL) /*!< 8192us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_16384us (0x07UL) /*!< 16384us sample period. */ + +/* Register: QDEC_SAMPLE */ +/* Description: Motion sample value. */ + +/* Bits 31..0 : Last sample taken in compliment to 2. */ +#define QDEC_SAMPLE_SAMPLE_Pos (0UL) /*!< Position of SAMPLE field. */ +#define QDEC_SAMPLE_SAMPLE_Msk (0xFFFFFFFFUL << QDEC_SAMPLE_SAMPLE_Pos) /*!< Bit mask of SAMPLE field. */ + +/* Register: QDEC_REPORTPER */ +/* Description: Number of samples to generate an EVENT_REPORTRDY. */ + +/* Bits 2..0 : Number of samples to generate an EVENT_REPORTRDY. */ +#define QDEC_REPORTPER_REPORTPER_Pos (0UL) /*!< Position of REPORTPER field. */ +#define QDEC_REPORTPER_REPORTPER_Msk (0x7UL << QDEC_REPORTPER_REPORTPER_Pos) /*!< Bit mask of REPORTPER field. */ +#define QDEC_REPORTPER_REPORTPER_10Smpl (0x00UL) /*!< 10 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_40Smpl (0x01UL) /*!< 40 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_80Smpl (0x02UL) /*!< 80 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_120Smpl (0x03UL) /*!< 120 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_160Smpl (0x04UL) /*!< 160 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_200Smpl (0x05UL) /*!< 200 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_240Smpl (0x06UL) /*!< 240 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_280Smpl (0x07UL) /*!< 280 samples per report. */ + +/* Register: QDEC_DBFEN */ +/* Description: Enable debouncer input filters. */ + +/* Bit 0 : Enable debounce input filters. */ +#define QDEC_DBFEN_DBFEN_Pos (0UL) /*!< Position of DBFEN field. */ +#define QDEC_DBFEN_DBFEN_Msk (0x1UL << QDEC_DBFEN_DBFEN_Pos) /*!< Bit mask of DBFEN field. */ +#define QDEC_DBFEN_DBFEN_Disabled (0UL) /*!< Debounce input filters disabled. */ +#define QDEC_DBFEN_DBFEN_Enabled (1UL) /*!< Debounce input filters enabled. */ + +/* Register: QDEC_LEDPRE */ +/* Description: Time LED is switched ON before the sample. */ + +/* Bits 7..0 : Period in us the LED in switched on prior to sampling. */ +#define QDEC_LEDPRE_LEDPRE_Pos (0UL) /*!< Position of LEDPRE field. */ +#define QDEC_LEDPRE_LEDPRE_Msk (0xFFUL << QDEC_LEDPRE_LEDPRE_Pos) /*!< Bit mask of LEDPRE field. */ + +/* Register: QDEC_ACCDBL */ +/* Description: Accumulated double (error) transitions register. */ + +/* Bits 3..0 : Accumulated double (error) transitions. */ +#define QDEC_ACCDBL_ACCDBL_Pos (0UL) /*!< Position of ACCDBL field. */ +#define QDEC_ACCDBL_ACCDBL_Msk (0xFUL << QDEC_ACCDBL_ACCDBL_Pos) /*!< Bit mask of ACCDBL field. */ + +/* Register: QDEC_ACCDBLREAD */ +/* Description: Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC task. */ + +/* Bits 3..0 : Snapshot of accumulated double (error) transitions. */ +#define QDEC_ACCDBLREAD_ACCDBLREAD_Pos (0UL) /*!< Position of ACCDBLREAD field. */ +#define QDEC_ACCDBLREAD_ACCDBLREAD_Msk (0xFUL << QDEC_ACCDBLREAD_ACCDBLREAD_Pos) /*!< Bit mask of ACCDBLREAD field. */ + +/* Register: QDEC_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define QDEC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define QDEC_POWER_POWER_Msk (0x1UL << QDEC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define QDEC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define QDEC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: RADIO */ +/* Description: The radio. */ + +/* Register: RADIO_SHORTS */ +/* Description: Shortcut for the radio. */ + +/* Bit 8 : Shortcut between DISABLED event and RSSISTOP task. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Pos (8UL) /*!< Position of DISABLED_RSSISTOP field. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Msk (0x1UL << RADIO_SHORTS_DISABLED_RSSISTOP_Pos) /*!< Bit mask of DISABLED_RSSISTOP field. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 6 : Shortcut between ADDRESS event and BCSTART task. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Pos (6UL) /*!< Position of ADDRESS_BCSTART field. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_BCSTART_Pos) /*!< Bit mask of ADDRESS_BCSTART field. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 5 : Shortcut between END event and START task. */ +#define RADIO_SHORTS_END_START_Pos (5UL) /*!< Position of END_START field. */ +#define RADIO_SHORTS_END_START_Msk (0x1UL << RADIO_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */ +#define RADIO_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 4 : Shortcut between ADDRESS event and RSSISTART task. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Pos (4UL) /*!< Position of ADDRESS_RSSISTART field. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_RSSISTART_Pos) /*!< Bit mask of ADDRESS_RSSISTART field. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between DISABLED event and RXEN task. */ +#define RADIO_SHORTS_DISABLED_RXEN_Pos (3UL) /*!< Position of DISABLED_RXEN field. */ +#define RADIO_SHORTS_DISABLED_RXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_RXEN_Pos) /*!< Bit mask of DISABLED_RXEN field. */ +#define RADIO_SHORTS_DISABLED_RXEN_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_DISABLED_RXEN_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Shortcut between DISABLED event and TXEN task. */ +#define RADIO_SHORTS_DISABLED_TXEN_Pos (2UL) /*!< Position of DISABLED_TXEN field. */ +#define RADIO_SHORTS_DISABLED_TXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_TXEN_Pos) /*!< Bit mask of DISABLED_TXEN field. */ +#define RADIO_SHORTS_DISABLED_TXEN_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_DISABLED_TXEN_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Shortcut between END event and DISABLE task. */ +#define RADIO_SHORTS_END_DISABLE_Pos (1UL) /*!< Position of END_DISABLE field. */ +#define RADIO_SHORTS_END_DISABLE_Msk (0x1UL << RADIO_SHORTS_END_DISABLE_Pos) /*!< Bit mask of END_DISABLE field. */ +#define RADIO_SHORTS_END_DISABLE_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_END_DISABLE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between READY event and START task. */ +#define RADIO_SHORTS_READY_START_Pos (0UL) /*!< Position of READY_START field. */ +#define RADIO_SHORTS_READY_START_Msk (0x1UL << RADIO_SHORTS_READY_START_Pos) /*!< Bit mask of READY_START field. */ +#define RADIO_SHORTS_READY_START_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_READY_START_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: RADIO_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 10 : Enable interrupt on BCMATCH event. */ +#define RADIO_INTENSET_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ +#define RADIO_INTENSET_BCMATCH_Msk (0x1UL << RADIO_INTENSET_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ +#define RADIO_INTENSET_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_BCMATCH_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 7 : Enable interrupt on RSSIEND event. */ +#define RADIO_INTENSET_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ +#define RADIO_INTENSET_RSSIEND_Msk (0x1UL << RADIO_INTENSET_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ +#define RADIO_INTENSET_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_RSSIEND_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 6 : Enable interrupt on DEVMISS event. */ +#define RADIO_INTENSET_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ +#define RADIO_INTENSET_DEVMISS_Msk (0x1UL << RADIO_INTENSET_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ +#define RADIO_INTENSET_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_DEVMISS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 5 : Enable interrupt on DEVMATCH event. */ +#define RADIO_INTENSET_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ +#define RADIO_INTENSET_DEVMATCH_Msk (0x1UL << RADIO_INTENSET_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ +#define RADIO_INTENSET_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_DEVMATCH_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 4 : Enable interrupt on DISABLED event. */ +#define RADIO_INTENSET_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ +#define RADIO_INTENSET_DISABLED_Msk (0x1UL << RADIO_INTENSET_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ +#define RADIO_INTENSET_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_DISABLED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 3 : Enable interrupt on END event. */ +#define RADIO_INTENSET_END_Pos (3UL) /*!< Position of END field. */ +#define RADIO_INTENSET_END_Msk (0x1UL << RADIO_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define RADIO_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on PAYLOAD event. */ +#define RADIO_INTENSET_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ +#define RADIO_INTENSET_PAYLOAD_Msk (0x1UL << RADIO_INTENSET_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ +#define RADIO_INTENSET_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_PAYLOAD_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on ADDRESS event. */ +#define RADIO_INTENSET_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ +#define RADIO_INTENSET_ADDRESS_Msk (0x1UL << RADIO_INTENSET_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ +#define RADIO_INTENSET_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_ADDRESS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on READY event. */ +#define RADIO_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ +#define RADIO_INTENSET_READY_Msk (0x1UL << RADIO_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define RADIO_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: RADIO_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 10 : Disable interrupt on BCMATCH event. */ +#define RADIO_INTENCLR_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ +#define RADIO_INTENCLR_BCMATCH_Msk (0x1UL << RADIO_INTENCLR_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ +#define RADIO_INTENCLR_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_BCMATCH_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 7 : Disable interrupt on RSSIEND event. */ +#define RADIO_INTENCLR_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ +#define RADIO_INTENCLR_RSSIEND_Msk (0x1UL << RADIO_INTENCLR_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ +#define RADIO_INTENCLR_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_RSSIEND_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 6 : Disable interrupt on DEVMISS event. */ +#define RADIO_INTENCLR_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ +#define RADIO_INTENCLR_DEVMISS_Msk (0x1UL << RADIO_INTENCLR_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ +#define RADIO_INTENCLR_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_DEVMISS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 5 : Disable interrupt on DEVMATCH event. */ +#define RADIO_INTENCLR_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ +#define RADIO_INTENCLR_DEVMATCH_Msk (0x1UL << RADIO_INTENCLR_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ +#define RADIO_INTENCLR_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_DEVMATCH_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 4 : Disable interrupt on DISABLED event. */ +#define RADIO_INTENCLR_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ +#define RADIO_INTENCLR_DISABLED_Msk (0x1UL << RADIO_INTENCLR_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ +#define RADIO_INTENCLR_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_DISABLED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 3 : Disable interrupt on END event. */ +#define RADIO_INTENCLR_END_Pos (3UL) /*!< Position of END field. */ +#define RADIO_INTENCLR_END_Msk (0x1UL << RADIO_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define RADIO_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on PAYLOAD event. */ +#define RADIO_INTENCLR_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ +#define RADIO_INTENCLR_PAYLOAD_Msk (0x1UL << RADIO_INTENCLR_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ +#define RADIO_INTENCLR_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_PAYLOAD_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on ADDRESS event. */ +#define RADIO_INTENCLR_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ +#define RADIO_INTENCLR_ADDRESS_Msk (0x1UL << RADIO_INTENCLR_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ +#define RADIO_INTENCLR_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_ADDRESS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on READY event. */ +#define RADIO_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ +#define RADIO_INTENCLR_READY_Msk (0x1UL << RADIO_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define RADIO_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: RADIO_CRCSTATUS */ +/* Description: CRC status of received packet. */ + +/* Bit 0 : CRC status of received packet. */ +#define RADIO_CRCSTATUS_CRCSTATUS_Pos (0UL) /*!< Position of CRCSTATUS field. */ +#define RADIO_CRCSTATUS_CRCSTATUS_Msk (0x1UL << RADIO_CRCSTATUS_CRCSTATUS_Pos) /*!< Bit mask of CRCSTATUS field. */ +#define RADIO_CRCSTATUS_CRCSTATUS_CRCError (0UL) /*!< Packet received with CRC error. */ +#define RADIO_CRCSTATUS_CRCSTATUS_CRCOk (1UL) /*!< Packet received with CRC ok. */ + +/* Register: RADIO_RXMATCH */ +/* Description: Received address. */ + +/* Bits 2..0 : Logical address in which previous packet was received. */ +#define RADIO_RXMATCH_RXMATCH_Pos (0UL) /*!< Position of RXMATCH field. */ +#define RADIO_RXMATCH_RXMATCH_Msk (0x7UL << RADIO_RXMATCH_RXMATCH_Pos) /*!< Bit mask of RXMATCH field. */ + +/* Register: RADIO_RXCRC */ +/* Description: Received CRC. */ + +/* Bits 23..0 : CRC field of previously received packet. */ +#define RADIO_RXCRC_RXCRC_Pos (0UL) /*!< Position of RXCRC field. */ +#define RADIO_RXCRC_RXCRC_Msk (0xFFFFFFUL << RADIO_RXCRC_RXCRC_Pos) /*!< Bit mask of RXCRC field. */ + +/* Register: RADIO_DAI */ +/* Description: Device address match index. */ + +/* Bits 2..0 : Index (n) of device address (see DAB[n] and DAP[n]) that got an address match. */ +#define RADIO_DAI_DAI_Pos (0UL) /*!< Position of DAI field. */ +#define RADIO_DAI_DAI_Msk (0x7UL << RADIO_DAI_DAI_Pos) /*!< Bit mask of DAI field. */ + +/* Register: RADIO_FREQUENCY */ +/* Description: Frequency. */ + +/* Bits 6..0 : Radio channel frequency offset in MHz: RF Frequency = 2400 + FREQUENCY (MHz). Decision point: TXEN or RXEN task. */ +#define RADIO_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ +#define RADIO_FREQUENCY_FREQUENCY_Msk (0x7FUL << RADIO_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ + +/* Register: RADIO_TXPOWER */ +/* Description: Output power. */ + +/* Bits 7..0 : Radio output power. Decision point: TXEN task. */ +#define RADIO_TXPOWER_TXPOWER_Pos (0UL) /*!< Position of TXPOWER field. */ +#define RADIO_TXPOWER_TXPOWER_Msk (0xFFUL << RADIO_TXPOWER_TXPOWER_Pos) /*!< Bit mask of TXPOWER field. */ +#define RADIO_TXPOWER_TXPOWER_Pos4dBm (0x04UL) /*!< +4dBm. */ +#define RADIO_TXPOWER_TXPOWER_0dBm (0x00UL) /*!< 0dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg4dBm (0xFCUL) /*!< -4dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg8dBm (0xF8UL) /*!< -8dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg12dBm (0xF4UL) /*!< -12dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg16dBm (0xF0UL) /*!< -16dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg20dBm (0xECUL) /*!< -20dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg30dBm (0xD8UL) /*!< -30dBm. */ + +/* Register: RADIO_MODE */ +/* Description: Data rate and modulation. */ + +/* Bits 1..0 : Radio data rate and modulation setting. Decision point: TXEN or RXEN task. */ +#define RADIO_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define RADIO_MODE_MODE_Msk (0x3UL << RADIO_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ +#define RADIO_MODE_MODE_Nrf_1Mbit (0x00UL) /*!< 1Mbit/s Nordic propietary radio mode. */ +#define RADIO_MODE_MODE_Nrf_2Mbit (0x01UL) /*!< 2Mbit/s Nordic propietary radio mode. */ +#define RADIO_MODE_MODE_Nrf_250Kbit (0x02UL) /*!< 250kbit/s Nordic propietary radio mode. */ +#define RADIO_MODE_MODE_Ble_1Mbit (0x03UL) /*!< 1Mbit/s Bluetooth Low Energy */ + +/* Register: RADIO_PCNF0 */ +/* Description: Packet configuration 0. */ + +/* Bits 19..16 : Length of S1 field in number of bits. Decision point: START task. */ +#define RADIO_PCNF0_S1LEN_Pos (16UL) /*!< Position of S1LEN field. */ +#define RADIO_PCNF0_S1LEN_Msk (0xFUL << RADIO_PCNF0_S1LEN_Pos) /*!< Bit mask of S1LEN field. */ + +/* Bit 8 : Length of S0 field in number of bytes. Decision point: START task. */ +#define RADIO_PCNF0_S0LEN_Pos (8UL) /*!< Position of S0LEN field. */ +#define RADIO_PCNF0_S0LEN_Msk (0x1UL << RADIO_PCNF0_S0LEN_Pos) /*!< Bit mask of S0LEN field. */ + +/* Bits 3..0 : Length of length field in number of bits. Decision point: START task. */ +#define RADIO_PCNF0_LFLEN_Pos (0UL) /*!< Position of LFLEN field. */ +#define RADIO_PCNF0_LFLEN_Msk (0xFUL << RADIO_PCNF0_LFLEN_Pos) /*!< Bit mask of LFLEN field. */ + +/* Register: RADIO_PCNF1 */ +/* Description: Packet configuration 1. */ + +/* Bit 25 : Packet whitening enable. */ +#define RADIO_PCNF1_WHITEEN_Pos (25UL) /*!< Position of WHITEEN field. */ +#define RADIO_PCNF1_WHITEEN_Msk (0x1UL << RADIO_PCNF1_WHITEEN_Pos) /*!< Bit mask of WHITEEN field. */ +#define RADIO_PCNF1_WHITEEN_Disabled (0UL) /*!< Whitening disabled. */ +#define RADIO_PCNF1_WHITEEN_Enabled (1UL) /*!< Whitening enabled. */ + +/* Bit 24 : On air endianness of packet length field. Decision point: START task. */ +#define RADIO_PCNF1_ENDIAN_Pos (24UL) /*!< Position of ENDIAN field. */ +#define RADIO_PCNF1_ENDIAN_Msk (0x1UL << RADIO_PCNF1_ENDIAN_Pos) /*!< Bit mask of ENDIAN field. */ +#define RADIO_PCNF1_ENDIAN_Little (0UL) /*!< Least significant bit on air first */ +#define RADIO_PCNF1_ENDIAN_Big (1UL) /*!< Most significant bit on air first */ + +/* Bits 18..16 : Base address length in number of bytes. Decision point: START task. */ +#define RADIO_PCNF1_BALEN_Pos (16UL) /*!< Position of BALEN field. */ +#define RADIO_PCNF1_BALEN_Msk (0x7UL << RADIO_PCNF1_BALEN_Pos) /*!< Bit mask of BALEN field. */ + +/* Bits 15..8 : Static length in number of bytes. Decision point: START task. */ +#define RADIO_PCNF1_STATLEN_Pos (8UL) /*!< Position of STATLEN field. */ +#define RADIO_PCNF1_STATLEN_Msk (0xFFUL << RADIO_PCNF1_STATLEN_Pos) /*!< Bit mask of STATLEN field. */ + +/* Bits 7..0 : Maximum length of packet payload in number of bytes. */ +#define RADIO_PCNF1_MAXLEN_Pos (0UL) /*!< Position of MAXLEN field. */ +#define RADIO_PCNF1_MAXLEN_Msk (0xFFUL << RADIO_PCNF1_MAXLEN_Pos) /*!< Bit mask of MAXLEN field. */ + +/* Register: RADIO_PREFIX0 */ +/* Description: Prefixes bytes for logical addresses 0 to 3. */ + +/* Bits 31..24 : Address prefix 3. Decision point: START task. */ +#define RADIO_PREFIX0_AP3_Pos (24UL) /*!< Position of AP3 field. */ +#define RADIO_PREFIX0_AP3_Msk (0xFFUL << RADIO_PREFIX0_AP3_Pos) /*!< Bit mask of AP3 field. */ + +/* Bits 23..16 : Address prefix 2. Decision point: START task. */ +#define RADIO_PREFIX0_AP2_Pos (16UL) /*!< Position of AP2 field. */ +#define RADIO_PREFIX0_AP2_Msk (0xFFUL << RADIO_PREFIX0_AP2_Pos) /*!< Bit mask of AP2 field. */ + +/* Bits 15..8 : Address prefix 1. Decision point: START task. */ +#define RADIO_PREFIX0_AP1_Pos (8UL) /*!< Position of AP1 field. */ +#define RADIO_PREFIX0_AP1_Msk (0xFFUL << RADIO_PREFIX0_AP1_Pos) /*!< Bit mask of AP1 field. */ + +/* Bits 7..0 : Address prefix 0. Decision point: START task. */ +#define RADIO_PREFIX0_AP0_Pos (0UL) /*!< Position of AP0 field. */ +#define RADIO_PREFIX0_AP0_Msk (0xFFUL << RADIO_PREFIX0_AP0_Pos) /*!< Bit mask of AP0 field. */ + +/* Register: RADIO_PREFIX1 */ +/* Description: Prefixes bytes for logical addresses 4 to 7. */ + +/* Bits 31..24 : Address prefix 7. Decision point: START task. */ +#define RADIO_PREFIX1_AP7_Pos (24UL) /*!< Position of AP7 field. */ +#define RADIO_PREFIX1_AP7_Msk (0xFFUL << RADIO_PREFIX1_AP7_Pos) /*!< Bit mask of AP7 field. */ + +/* Bits 23..16 : Address prefix 6. Decision point: START task. */ +#define RADIO_PREFIX1_AP6_Pos (16UL) /*!< Position of AP6 field. */ +#define RADIO_PREFIX1_AP6_Msk (0xFFUL << RADIO_PREFIX1_AP6_Pos) /*!< Bit mask of AP6 field. */ + +/* Bits 15..8 : Address prefix 5. Decision point: START task. */ +#define RADIO_PREFIX1_AP5_Pos (8UL) /*!< Position of AP5 field. */ +#define RADIO_PREFIX1_AP5_Msk (0xFFUL << RADIO_PREFIX1_AP5_Pos) /*!< Bit mask of AP5 field. */ + +/* Bits 7..0 : Address prefix 4. Decision point: START task. */ +#define RADIO_PREFIX1_AP4_Pos (0UL) /*!< Position of AP4 field. */ +#define RADIO_PREFIX1_AP4_Msk (0xFFUL << RADIO_PREFIX1_AP4_Pos) /*!< Bit mask of AP4 field. */ + +/* Register: RADIO_TXADDRESS */ +/* Description: Transmit address select. */ + +/* Bits 2..0 : Logical address to be used when transmitting a packet. Decision point: START task. */ +#define RADIO_TXADDRESS_TXADDRESS_Pos (0UL) /*!< Position of TXADDRESS field. */ +#define RADIO_TXADDRESS_TXADDRESS_Msk (0x7UL << RADIO_TXADDRESS_TXADDRESS_Pos) /*!< Bit mask of TXADDRESS field. */ + +/* Register: RADIO_RXADDRESSES */ +/* Description: Receive address select. */ + +/* Bit 7 : Enable reception on logical address 7. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR7_Pos (7UL) /*!< Position of ADDR7 field. */ +#define RADIO_RXADDRESSES_ADDR7_Msk (0x1UL << RADIO_RXADDRESSES_ADDR7_Pos) /*!< Bit mask of ADDR7 field. */ +#define RADIO_RXADDRESSES_ADDR7_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR7_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 6 : Enable reception on logical address 6. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR6_Pos (6UL) /*!< Position of ADDR6 field. */ +#define RADIO_RXADDRESSES_ADDR6_Msk (0x1UL << RADIO_RXADDRESSES_ADDR6_Pos) /*!< Bit mask of ADDR6 field. */ +#define RADIO_RXADDRESSES_ADDR6_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR6_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 5 : Enable reception on logical address 5. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR5_Pos (5UL) /*!< Position of ADDR5 field. */ +#define RADIO_RXADDRESSES_ADDR5_Msk (0x1UL << RADIO_RXADDRESSES_ADDR5_Pos) /*!< Bit mask of ADDR5 field. */ +#define RADIO_RXADDRESSES_ADDR5_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR5_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 4 : Enable reception on logical address 4. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR4_Pos (4UL) /*!< Position of ADDR4 field. */ +#define RADIO_RXADDRESSES_ADDR4_Msk (0x1UL << RADIO_RXADDRESSES_ADDR4_Pos) /*!< Bit mask of ADDR4 field. */ +#define RADIO_RXADDRESSES_ADDR4_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR4_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 3 : Enable reception on logical address 3. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR3_Pos (3UL) /*!< Position of ADDR3 field. */ +#define RADIO_RXADDRESSES_ADDR3_Msk (0x1UL << RADIO_RXADDRESSES_ADDR3_Pos) /*!< Bit mask of ADDR3 field. */ +#define RADIO_RXADDRESSES_ADDR3_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR3_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 2 : Enable reception on logical address 2. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR2_Pos (2UL) /*!< Position of ADDR2 field. */ +#define RADIO_RXADDRESSES_ADDR2_Msk (0x1UL << RADIO_RXADDRESSES_ADDR2_Pos) /*!< Bit mask of ADDR2 field. */ +#define RADIO_RXADDRESSES_ADDR2_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR2_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 1 : Enable reception on logical address 1. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR1_Pos (1UL) /*!< Position of ADDR1 field. */ +#define RADIO_RXADDRESSES_ADDR1_Msk (0x1UL << RADIO_RXADDRESSES_ADDR1_Pos) /*!< Bit mask of ADDR1 field. */ +#define RADIO_RXADDRESSES_ADDR1_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR1_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 0 : Enable reception on logical address 0. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR0_Pos (0UL) /*!< Position of ADDR0 field. */ +#define RADIO_RXADDRESSES_ADDR0_Msk (0x1UL << RADIO_RXADDRESSES_ADDR0_Pos) /*!< Bit mask of ADDR0 field. */ +#define RADIO_RXADDRESSES_ADDR0_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR0_Enabled (1UL) /*!< Reception enabled. */ + +/* Register: RADIO_CRCCNF */ +/* Description: CRC configuration. */ + +/* Bit 8 : Leave packet address field out of the CRC calculation. Decision point: START task. */ +#define RADIO_CRCCNF_SKIP_ADDR_Pos (8UL) /*!< Position of SKIP_ADDR field. */ +#define RADIO_CRCCNF_SKIP_ADDR_Msk (0x1UL << RADIO_CRCCNF_SKIP_ADDR_Pos) /*!< Bit mask of SKIP_ADDR field. */ +#define RADIO_CRCCNF_SKIP_ADDR_Include (0UL) /*!< Include packet address in CRC calculation. */ +#define RADIO_CRCCNF_SKIP_ADDR_Skip (1UL) /*!< Packet address is skipped in CRC calculation. The CRC calculation will start at the first byte after the address. */ + +/* Bits 1..0 : CRC length. Decision point: START task. */ +#define RADIO_CRCCNF_LEN_Pos (0UL) /*!< Position of LEN field. */ +#define RADIO_CRCCNF_LEN_Msk (0x3UL << RADIO_CRCCNF_LEN_Pos) /*!< Bit mask of LEN field. */ +#define RADIO_CRCCNF_LEN_Disabled (0UL) /*!< CRC calculation disabled. */ +#define RADIO_CRCCNF_LEN_One (1UL) /*!< One byte long CRC. */ +#define RADIO_CRCCNF_LEN_Two (2UL) /*!< Two bytes long CRC. */ +#define RADIO_CRCCNF_LEN_Three (3UL) /*!< Three bytes long CRC. */ + +/* Register: RADIO_CRCPOLY */ +/* Description: CRC polynomial. */ + +/* Bits 23..1 : CRC polynomial. Decision point: START task. */ +#define RADIO_CRCPOLY_CRCPOLY_Pos (1UL) /*!< Position of CRCPOLY field. */ +#define RADIO_CRCPOLY_CRCPOLY_Msk (0x7FFFFFUL << RADIO_CRCPOLY_CRCPOLY_Pos) /*!< Bit mask of CRCPOLY field. */ + +/* Register: RADIO_CRCINIT */ +/* Description: CRC initial value. */ + +/* Bits 23..0 : Initial value for CRC calculation. Decision point: START task. */ +#define RADIO_CRCINIT_CRCINIT_Pos (0UL) /*!< Position of CRCINIT field. */ +#define RADIO_CRCINIT_CRCINIT_Msk (0xFFFFFFUL << RADIO_CRCINIT_CRCINIT_Pos) /*!< Bit mask of CRCINIT field. */ + +/* Register: RADIO_TEST */ +/* Description: Test features enable register. */ + +/* Bit 1 : PLL lock. Decision point: TXEN or RXEN task. */ +#define RADIO_TEST_PLL_LOCK_Pos (1UL) /*!< Position of PLL_LOCK field. */ +#define RADIO_TEST_PLL_LOCK_Msk (0x1UL << RADIO_TEST_PLL_LOCK_Pos) /*!< Bit mask of PLL_LOCK field. */ +#define RADIO_TEST_PLL_LOCK_Disabled (0UL) /*!< PLL lock disabled. */ +#define RADIO_TEST_PLL_LOCK_Enabled (1UL) /*!< PLL lock enabled. */ + +/* Bit 0 : Constant carrier. Decision point: TXEN task. */ +#define RADIO_TEST_CONST_CARRIER_Pos (0UL) /*!< Position of CONST_CARRIER field. */ +#define RADIO_TEST_CONST_CARRIER_Msk (0x1UL << RADIO_TEST_CONST_CARRIER_Pos) /*!< Bit mask of CONST_CARRIER field. */ +#define RADIO_TEST_CONST_CARRIER_Disabled (0UL) /*!< Constant carrier disabled. */ +#define RADIO_TEST_CONST_CARRIER_Enabled (1UL) /*!< Constant carrier enabled. */ + +/* Register: RADIO_TIFS */ +/* Description: Inter Frame Spacing in microseconds. */ + +/* Bits 7..0 : Inter frame spacing in microseconds. Decision point: START rask */ +#define RADIO_TIFS_TIFS_Pos (0UL) /*!< Position of TIFS field. */ +#define RADIO_TIFS_TIFS_Msk (0xFFUL << RADIO_TIFS_TIFS_Pos) /*!< Bit mask of TIFS field. */ + +/* Register: RADIO_RSSISAMPLE */ +/* Description: RSSI sample. */ + +/* Bits 6..0 : RSSI sample result. The result is read as a positive value so that ReceivedSignalStrength = -RSSISAMPLE dBm */ +#define RADIO_RSSISAMPLE_RSSISAMPLE_Pos (0UL) /*!< Position of RSSISAMPLE field. */ +#define RADIO_RSSISAMPLE_RSSISAMPLE_Msk (0x7FUL << RADIO_RSSISAMPLE_RSSISAMPLE_Pos) /*!< Bit mask of RSSISAMPLE field. */ + +/* Register: RADIO_STATE */ +/* Description: Current radio state. */ + +/* Bits 3..0 : Current radio state. */ +#define RADIO_STATE_STATE_Pos (0UL) /*!< Position of STATE field. */ +#define RADIO_STATE_STATE_Msk (0xFUL << RADIO_STATE_STATE_Pos) /*!< Bit mask of STATE field. */ +#define RADIO_STATE_STATE_Disabled (0x00UL) /*!< Radio is in the Disabled state. */ +#define RADIO_STATE_STATE_RxRu (0x01UL) /*!< Radio is in the Rx Ramp Up state. */ +#define RADIO_STATE_STATE_RxIdle (0x02UL) /*!< Radio is in the Rx Idle state. */ +#define RADIO_STATE_STATE_Rx (0x03UL) /*!< Radio is in the Rx state. */ +#define RADIO_STATE_STATE_RxDisable (0x04UL) /*!< Radio is in the Rx Disable state. */ +#define RADIO_STATE_STATE_TxRu (0x09UL) /*!< Radio is in the Tx Ramp Up state. */ +#define RADIO_STATE_STATE_TxIdle (0x0AUL) /*!< Radio is in the Tx Idle state. */ +#define RADIO_STATE_STATE_Tx (0x0BUL) /*!< Radio is in the Tx state. */ +#define RADIO_STATE_STATE_TxDisable (0x0CUL) /*!< Radio is in the Tx Disable state. */ + +/* Register: RADIO_DATAWHITEIV */ +/* Description: Data whitening initial value. */ + +/* Bits 5..0 : Data whitening initial value. Bit 0 corresponds to Position 0 of the LSFR, Bit 1 to position 5... Decision point: TXEN or RXEN task. */ +#define RADIO_DATAWHITEIV_DATAWHITEIV_Pos (0UL) /*!< Position of DATAWHITEIV field. */ +#define RADIO_DATAWHITEIV_DATAWHITEIV_Msk (0x3FUL << RADIO_DATAWHITEIV_DATAWHITEIV_Pos) /*!< Bit mask of DATAWHITEIV field. */ + +/* Register: RADIO_DAP */ +/* Description: Device address prefix. */ + +/* Bits 15..0 : Device address prefix. */ +#define RADIO_DAP_DAP_Pos (0UL) /*!< Position of DAP field. */ +#define RADIO_DAP_DAP_Msk (0xFFFFUL << RADIO_DAP_DAP_Pos) /*!< Bit mask of DAP field. */ + +/* Register: RADIO_DACNF */ +/* Description: Device address match configuration. */ + +/* Bit 15 : TxAdd for device address 7. */ +#define RADIO_DACNF_TXADD7_Pos (15UL) /*!< Position of TXADD7 field. */ +#define RADIO_DACNF_TXADD7_Msk (0x1UL << RADIO_DACNF_TXADD7_Pos) /*!< Bit mask of TXADD7 field. */ + +/* Bit 14 : TxAdd for device address 6. */ +#define RADIO_DACNF_TXADD6_Pos (14UL) /*!< Position of TXADD6 field. */ +#define RADIO_DACNF_TXADD6_Msk (0x1UL << RADIO_DACNF_TXADD6_Pos) /*!< Bit mask of TXADD6 field. */ + +/* Bit 13 : TxAdd for device address 5. */ +#define RADIO_DACNF_TXADD5_Pos (13UL) /*!< Position of TXADD5 field. */ +#define RADIO_DACNF_TXADD5_Msk (0x1UL << RADIO_DACNF_TXADD5_Pos) /*!< Bit mask of TXADD5 field. */ + +/* Bit 12 : TxAdd for device address 4. */ +#define RADIO_DACNF_TXADD4_Pos (12UL) /*!< Position of TXADD4 field. */ +#define RADIO_DACNF_TXADD4_Msk (0x1UL << RADIO_DACNF_TXADD4_Pos) /*!< Bit mask of TXADD4 field. */ + +/* Bit 11 : TxAdd for device address 3. */ +#define RADIO_DACNF_TXADD3_Pos (11UL) /*!< Position of TXADD3 field. */ +#define RADIO_DACNF_TXADD3_Msk (0x1UL << RADIO_DACNF_TXADD3_Pos) /*!< Bit mask of TXADD3 field. */ + +/* Bit 10 : TxAdd for device address 2. */ +#define RADIO_DACNF_TXADD2_Pos (10UL) /*!< Position of TXADD2 field. */ +#define RADIO_DACNF_TXADD2_Msk (0x1UL << RADIO_DACNF_TXADD2_Pos) /*!< Bit mask of TXADD2 field. */ + +/* Bit 9 : TxAdd for device address 1. */ +#define RADIO_DACNF_TXADD1_Pos (9UL) /*!< Position of TXADD1 field. */ +#define RADIO_DACNF_TXADD1_Msk (0x1UL << RADIO_DACNF_TXADD1_Pos) /*!< Bit mask of TXADD1 field. */ + +/* Bit 8 : TxAdd for device address 0. */ +#define RADIO_DACNF_TXADD0_Pos (8UL) /*!< Position of TXADD0 field. */ +#define RADIO_DACNF_TXADD0_Msk (0x1UL << RADIO_DACNF_TXADD0_Pos) /*!< Bit mask of TXADD0 field. */ + +/* Bit 7 : Enable or disable device address matching using device address 7. */ +#define RADIO_DACNF_ENA7_Pos (7UL) /*!< Position of ENA7 field. */ +#define RADIO_DACNF_ENA7_Msk (0x1UL << RADIO_DACNF_ENA7_Pos) /*!< Bit mask of ENA7 field. */ +#define RADIO_DACNF_ENA7_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA7_Enabled (1UL) /*!< Enabled. */ + +/* Bit 6 : Enable or disable device address matching using device address 6. */ +#define RADIO_DACNF_ENA6_Pos (6UL) /*!< Position of ENA6 field. */ +#define RADIO_DACNF_ENA6_Msk (0x1UL << RADIO_DACNF_ENA6_Pos) /*!< Bit mask of ENA6 field. */ +#define RADIO_DACNF_ENA6_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA6_Enabled (1UL) /*!< Enabled. */ + +/* Bit 5 : Enable or disable device address matching using device address 5. */ +#define RADIO_DACNF_ENA5_Pos (5UL) /*!< Position of ENA5 field. */ +#define RADIO_DACNF_ENA5_Msk (0x1UL << RADIO_DACNF_ENA5_Pos) /*!< Bit mask of ENA5 field. */ +#define RADIO_DACNF_ENA5_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA5_Enabled (1UL) /*!< Enabled. */ + +/* Bit 4 : Enable or disable device address matching using device address 4. */ +#define RADIO_DACNF_ENA4_Pos (4UL) /*!< Position of ENA4 field. */ +#define RADIO_DACNF_ENA4_Msk (0x1UL << RADIO_DACNF_ENA4_Pos) /*!< Bit mask of ENA4 field. */ +#define RADIO_DACNF_ENA4_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA4_Enabled (1UL) /*!< Enabled. */ + +/* Bit 3 : Enable or disable device address matching using device address 3. */ +#define RADIO_DACNF_ENA3_Pos (3UL) /*!< Position of ENA3 field. */ +#define RADIO_DACNF_ENA3_Msk (0x1UL << RADIO_DACNF_ENA3_Pos) /*!< Bit mask of ENA3 field. */ +#define RADIO_DACNF_ENA3_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA3_Enabled (1UL) /*!< Enabled. */ + +/* Bit 2 : Enable or disable device address matching using device address 2. */ +#define RADIO_DACNF_ENA2_Pos (2UL) /*!< Position of ENA2 field. */ +#define RADIO_DACNF_ENA2_Msk (0x1UL << RADIO_DACNF_ENA2_Pos) /*!< Bit mask of ENA2 field. */ +#define RADIO_DACNF_ENA2_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA2_Enabled (1UL) /*!< Enabled. */ + +/* Bit 1 : Enable or disable device address matching using device address 1. */ +#define RADIO_DACNF_ENA1_Pos (1UL) /*!< Position of ENA1 field. */ +#define RADIO_DACNF_ENA1_Msk (0x1UL << RADIO_DACNF_ENA1_Pos) /*!< Bit mask of ENA1 field. */ +#define RADIO_DACNF_ENA1_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA1_Enabled (1UL) /*!< Enabled. */ + +/* Bit 0 : Enable or disable device address matching using device address 0. */ +#define RADIO_DACNF_ENA0_Pos (0UL) /*!< Position of ENA0 field. */ +#define RADIO_DACNF_ENA0_Msk (0x1UL << RADIO_DACNF_ENA0_Pos) /*!< Bit mask of ENA0 field. */ +#define RADIO_DACNF_ENA0_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA0_Enabled (1UL) /*!< Enabled. */ + +/* Register: RADIO_OVERRIDE0 */ +/* Description: Trim value override register 0. */ + +/* Bits 31..0 : Trim value override register 0. */ +#define RADIO_OVERRIDE0_OVERRIDE0_Pos (0UL) /*!< Position of OVERRIDE0 field. */ +#define RADIO_OVERRIDE0_OVERRIDE0_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE0_OVERRIDE0_Pos) /*!< Bit mask of OVERRIDE0 field. */ + +/* Register: RADIO_OVERRIDE1 */ +/* Description: Trim value override register 1. */ + +/* Bits 31..0 : Trim value override register 1. */ +#define RADIO_OVERRIDE1_OVERRIDE1_Pos (0UL) /*!< Position of OVERRIDE1 field. */ +#define RADIO_OVERRIDE1_OVERRIDE1_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE1_OVERRIDE1_Pos) /*!< Bit mask of OVERRIDE1 field. */ + +/* Register: RADIO_OVERRIDE2 */ +/* Description: Trim value override register 2. */ + +/* Bits 31..0 : Trim value override register 2. */ +#define RADIO_OVERRIDE2_OVERRIDE2_Pos (0UL) /*!< Position of OVERRIDE2 field. */ +#define RADIO_OVERRIDE2_OVERRIDE2_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE2_OVERRIDE2_Pos) /*!< Bit mask of OVERRIDE2 field. */ + +/* Register: RADIO_OVERRIDE3 */ +/* Description: Trim value override register 3. */ + +/* Bits 31..0 : Trim value override register 3. */ +#define RADIO_OVERRIDE3_OVERRIDE3_Pos (0UL) /*!< Position of OVERRIDE3 field. */ +#define RADIO_OVERRIDE3_OVERRIDE3_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE3_OVERRIDE3_Pos) /*!< Bit mask of OVERRIDE3 field. */ + +/* Register: RADIO_OVERRIDE4 */ +/* Description: Trim value override register 4. */ + +/* Bit 31 : Enable or disable override of default trim values. */ +#define RADIO_OVERRIDE4_ENABLE_Pos (31UL) /*!< Position of ENABLE field. */ +#define RADIO_OVERRIDE4_ENABLE_Msk (0x1UL << RADIO_OVERRIDE4_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define RADIO_OVERRIDE4_ENABLE_Disabled (0UL) /*!< Override trim values disabled. */ +#define RADIO_OVERRIDE4_ENABLE_Enabled (1UL) /*!< Override trim values enabled. */ + +/* Bits 27..0 : Trim value override register 4. */ +#define RADIO_OVERRIDE4_OVERRIDE4_Pos (0UL) /*!< Position of OVERRIDE4 field. */ +#define RADIO_OVERRIDE4_OVERRIDE4_Msk (0xFFFFFFFUL << RADIO_OVERRIDE4_OVERRIDE4_Pos) /*!< Bit mask of OVERRIDE4 field. */ + +/* Register: RADIO_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define RADIO_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define RADIO_POWER_POWER_Msk (0x1UL << RADIO_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define RADIO_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define RADIO_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: RNG */ +/* Description: Random Number Generator. */ + +/* Register: RNG_SHORTS */ +/* Description: Shortcut for the RNG. */ + +/* Bit 0 : Short-cut between VALRDY event and STOP task. */ +#define RNG_SHORTS_VALRDY_STOP_Pos (0UL) /*!< Position of VALRDY_STOP field. */ +#define RNG_SHORTS_VALRDY_STOP_Msk (0x1UL << RNG_SHORTS_VALRDY_STOP_Pos) /*!< Bit mask of VALRDY_STOP field. */ +#define RNG_SHORTS_VALRDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define RNG_SHORTS_VALRDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: RNG_INTENSET */ +/* Description: Interrupt enable set register */ + +/* Bit 0 : Enable interrupt on VALRDY event. */ +#define RNG_INTENSET_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ +#define RNG_INTENSET_VALRDY_Msk (0x1UL << RNG_INTENSET_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ +#define RNG_INTENSET_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RNG_INTENSET_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RNG_INTENSET_VALRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: RNG_INTENCLR */ +/* Description: Interrupt enable clear register */ + +/* Bit 0 : Disable interrupt on VALRDY event. */ +#define RNG_INTENCLR_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ +#define RNG_INTENCLR_VALRDY_Msk (0x1UL << RNG_INTENCLR_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ +#define RNG_INTENCLR_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RNG_INTENCLR_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RNG_INTENCLR_VALRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: RNG_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 0 : Digital error correction enable. */ +#define RNG_CONFIG_DERCEN_Pos (0UL) /*!< Position of DERCEN field. */ +#define RNG_CONFIG_DERCEN_Msk (0x1UL << RNG_CONFIG_DERCEN_Pos) /*!< Bit mask of DERCEN field. */ +#define RNG_CONFIG_DERCEN_Disabled (0UL) /*!< Digital error correction disabled. */ +#define RNG_CONFIG_DERCEN_Enabled (1UL) /*!< Digital error correction enabled. */ + +/* Register: RNG_VALUE */ +/* Description: RNG random number. */ + +/* Bits 7..0 : Generated random number. */ +#define RNG_VALUE_VALUE_Pos (0UL) /*!< Position of VALUE field. */ +#define RNG_VALUE_VALUE_Msk (0xFFUL << RNG_VALUE_VALUE_Pos) /*!< Bit mask of VALUE field. */ + +/* Register: RNG_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define RNG_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define RNG_POWER_POWER_Msk (0x1UL << RNG_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define RNG_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define RNG_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: RTC */ +/* Description: Real time counter 0. */ + +/* Register: RTC_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 19 : Enable interrupt on COMPARE[3] event. */ +#define RTC_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_INTENSET_COMPARE3_Msk (0x1UL << RTC_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 18 : Enable interrupt on COMPARE[2] event. */ +#define RTC_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_INTENSET_COMPARE2_Msk (0x1UL << RTC_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 17 : Enable interrupt on COMPARE[1] event. */ +#define RTC_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_INTENSET_COMPARE1_Msk (0x1UL << RTC_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 16 : Enable interrupt on COMPARE[0] event. */ +#define RTC_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_INTENSET_COMPARE0_Msk (0x1UL << RTC_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on OVRFLW event. */ +#define RTC_INTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_INTENSET_OVRFLW_Msk (0x1UL << RTC_INTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_INTENSET_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_OVRFLW_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on TICK event. */ +#define RTC_INTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_INTENSET_TICK_Msk (0x1UL << RTC_INTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_INTENSET_TICK_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_TICK_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_TICK_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: RTC_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 19 : Disable interrupt on COMPARE[3] event. */ +#define RTC_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_INTENCLR_COMPARE3_Msk (0x1UL << RTC_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 18 : Disable interrupt on COMPARE[2] event. */ +#define RTC_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_INTENCLR_COMPARE2_Msk (0x1UL << RTC_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 17 : Disable interrupt on COMPARE[1] event. */ +#define RTC_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_INTENCLR_COMPARE1_Msk (0x1UL << RTC_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 16 : Disable interrupt on COMPARE[0] event. */ +#define RTC_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_INTENCLR_COMPARE0_Msk (0x1UL << RTC_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on OVRFLW event. */ +#define RTC_INTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_INTENCLR_OVRFLW_Msk (0x1UL << RTC_INTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_INTENCLR_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_OVRFLW_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on TICK event. */ +#define RTC_INTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_INTENCLR_TICK_Msk (0x1UL << RTC_INTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_INTENCLR_TICK_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_TICK_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_TICK_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: RTC_EVTEN */ +/* Description: Configures event enable routing to PPI for each RTC event. */ + +/* Bit 19 : COMPARE[3] event enable. */ +#define RTC_EVTEN_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_EVTEN_COMPARE3_Msk (0x1UL << RTC_EVTEN_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_EVTEN_COMPARE3_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE3_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 18 : COMPARE[2] event enable. */ +#define RTC_EVTEN_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_EVTEN_COMPARE2_Msk (0x1UL << RTC_EVTEN_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_EVTEN_COMPARE2_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE2_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 17 : COMPARE[1] event enable. */ +#define RTC_EVTEN_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_EVTEN_COMPARE1_Msk (0x1UL << RTC_EVTEN_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_EVTEN_COMPARE1_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE1_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 16 : COMPARE[0] event enable. */ +#define RTC_EVTEN_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_EVTEN_COMPARE0_Msk (0x1UL << RTC_EVTEN_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_EVTEN_COMPARE0_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE0_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 1 : OVRFLW event enable. */ +#define RTC_EVTEN_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_EVTEN_OVRFLW_Msk (0x1UL << RTC_EVTEN_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_EVTEN_OVRFLW_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_OVRFLW_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 0 : TICK event enable. */ +#define RTC_EVTEN_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_EVTEN_TICK_Msk (0x1UL << RTC_EVTEN_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_EVTEN_TICK_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_TICK_Enabled (1UL) /*!< Event enabled. */ + +/* Register: RTC_EVTENSET */ +/* Description: Enable events routing to PPI. The reading of this register gives the value of EVTEN. */ + +/* Bit 19 : Enable routing to PPI of COMPARE[3] event. */ +#define RTC_EVTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_EVTENSET_COMPARE3_Msk (0x1UL << RTC_EVTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_EVTENSET_COMPARE3_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE3_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE3_Set (1UL) /*!< Enable event on write. */ + +/* Bit 18 : Enable routing to PPI of COMPARE[2] event. */ +#define RTC_EVTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_EVTENSET_COMPARE2_Msk (0x1UL << RTC_EVTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_EVTENSET_COMPARE2_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE2_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE2_Set (1UL) /*!< Enable event on write. */ + +/* Bit 17 : Enable routing to PPI of COMPARE[1] event. */ +#define RTC_EVTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_EVTENSET_COMPARE1_Msk (0x1UL << RTC_EVTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_EVTENSET_COMPARE1_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE1_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE1_Set (1UL) /*!< Enable event on write. */ + +/* Bit 16 : Enable routing to PPI of COMPARE[0] event. */ +#define RTC_EVTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_EVTENSET_COMPARE0_Msk (0x1UL << RTC_EVTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_EVTENSET_COMPARE0_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE0_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE0_Set (1UL) /*!< Enable event on write. */ + +/* Bit 1 : Enable routing to PPI of OVRFLW event. */ +#define RTC_EVTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_EVTENSET_OVRFLW_Msk (0x1UL << RTC_EVTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_EVTENSET_OVRFLW_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_OVRFLW_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_OVRFLW_Set (1UL) /*!< Enable event on write. */ + +/* Bit 0 : Enable routing to PPI of TICK event. */ +#define RTC_EVTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_EVTENSET_TICK_Msk (0x1UL << RTC_EVTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_EVTENSET_TICK_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_TICK_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_TICK_Set (1UL) /*!< Enable event on write. */ + +/* Register: RTC_EVTENCLR */ +/* Description: Disable events routing to PPI. The reading of this register gives the value of EVTEN. */ + +/* Bit 19 : Disable routing to PPI of COMPARE[3] event. */ +#define RTC_EVTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_EVTENCLR_COMPARE3_Msk (0x1UL << RTC_EVTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_EVTENCLR_COMPARE3_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE3_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE3_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 18 : Disable routing to PPI of COMPARE[2] event. */ +#define RTC_EVTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_EVTENCLR_COMPARE2_Msk (0x1UL << RTC_EVTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_EVTENCLR_COMPARE2_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE2_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE2_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 17 : Disable routing to PPI of COMPARE[1] event. */ +#define RTC_EVTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_EVTENCLR_COMPARE1_Msk (0x1UL << RTC_EVTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_EVTENCLR_COMPARE1_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE1_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE1_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 16 : Disable routing to PPI of COMPARE[0] event. */ +#define RTC_EVTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_EVTENCLR_COMPARE0_Msk (0x1UL << RTC_EVTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_EVTENCLR_COMPARE0_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE0_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE0_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 1 : Disable routing to PPI of OVRFLW event. */ +#define RTC_EVTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_EVTENCLR_OVRFLW_Msk (0x1UL << RTC_EVTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_EVTENCLR_OVRFLW_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_OVRFLW_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_OVRFLW_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 0 : Disable routing to PPI of TICK event. */ +#define RTC_EVTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_EVTENCLR_TICK_Msk (0x1UL << RTC_EVTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_EVTENCLR_TICK_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_TICK_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_TICK_Clear (1UL) /*!< Disable event on write. */ + +/* Register: RTC_COUNTER */ +/* Description: Current COUNTER value. */ + +/* Bits 23..0 : Counter value. */ +#define RTC_COUNTER_COUNTER_Pos (0UL) /*!< Position of COUNTER field. */ +#define RTC_COUNTER_COUNTER_Msk (0xFFFFFFUL << RTC_COUNTER_COUNTER_Pos) /*!< Bit mask of COUNTER field. */ + +/* Register: RTC_PRESCALER */ +/* Description: 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). Must be written when RTC is STOPed. */ + +/* Bits 11..0 : RTC PRESCALER value. */ +#define RTC_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ +#define RTC_PRESCALER_PRESCALER_Msk (0xFFFUL << RTC_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ + +/* Register: RTC_CC */ +/* Description: Capture/compare registers. */ + +/* Bits 23..0 : Compare value. */ +#define RTC_CC_COMPARE_Pos (0UL) /*!< Position of COMPARE field. */ +#define RTC_CC_COMPARE_Msk (0xFFFFFFUL << RTC_CC_COMPARE_Pos) /*!< Bit mask of COMPARE field. */ + +/* Register: RTC_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define RTC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define RTC_POWER_POWER_Msk (0x1UL << RTC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define RTC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define RTC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: SPI */ +/* Description: SPI master 0. */ + +/* Register: SPI_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on READY event. */ +#define SPI_INTENSET_READY_Pos (2UL) /*!< Position of READY field. */ +#define SPI_INTENSET_READY_Msk (0x1UL << SPI_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define SPI_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPI_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPI_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: SPI_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on READY event. */ +#define SPI_INTENCLR_READY_Pos (2UL) /*!< Position of READY field. */ +#define SPI_INTENCLR_READY_Msk (0x1UL << SPI_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define SPI_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPI_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPI_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: SPI_ENABLE */ +/* Description: Enable SPI. */ + +/* Bits 2..0 : Enable or disable SPI. */ +#define SPI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define SPI_ENABLE_ENABLE_Msk (0x7UL << SPI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define SPI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPI. */ +#define SPI_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable SPI. */ + +/* Register: SPI_RXD */ +/* Description: RX data. */ + +/* Bits 7..0 : RX data from last transfer. */ +#define SPI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ +#define SPI_RXD_RXD_Msk (0xFFUL << SPI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ + +/* Register: SPI_TXD */ +/* Description: TX data. */ + +/* Bits 7..0 : TX data for next transfer. */ +#define SPI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ +#define SPI_TXD_TXD_Msk (0xFFUL << SPI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ + +/* Register: SPI_FREQUENCY */ +/* Description: SPI frequency */ + +/* Bits 31..0 : SPI data rate. */ +#define SPI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ +#define SPI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ +#define SPI_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125kbps. */ +#define SPI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250kbps. */ +#define SPI_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500kbps. */ +#define SPI_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1Mbps. */ +#define SPI_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2Mbps. */ +#define SPI_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4Mbps. */ +#define SPI_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8Mbps. */ + +/* Register: SPI_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 2 : Serial clock (SCK) polarity. */ +#define SPI_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ +#define SPI_CONFIG_CPOL_Msk (0x1UL << SPI_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ +#define SPI_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ +#define SPI_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ + +/* Bit 1 : Serial clock (SCK) phase. */ +#define SPI_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ +#define SPI_CONFIG_CPHA_Msk (0x1UL << SPI_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ +#define SPI_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ +#define SPI_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ + +/* Bit 0 : Bit order. */ +#define SPI_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ +#define SPI_CONFIG_ORDER_Msk (0x1UL << SPI_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ +#define SPI_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ +#define SPI_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ + +/* Register: SPI_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define SPI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define SPI_POWER_POWER_Msk (0x1UL << SPI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define SPI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define SPI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: SPIS */ +/* Description: SPI slave 1. */ + +/* Register: SPIS_SHORTS */ +/* Description: Shortcuts for SPIS. */ + +/* Bit 2 : Shortcut between END event and the ACQUIRE task. */ +#define SPIS_SHORTS_END_ACQUIRE_Pos (2UL) /*!< Position of END_ACQUIRE field. */ +#define SPIS_SHORTS_END_ACQUIRE_Msk (0x1UL << SPIS_SHORTS_END_ACQUIRE_Pos) /*!< Bit mask of END_ACQUIRE field. */ +#define SPIS_SHORTS_END_ACQUIRE_Disabled (0UL) /*!< Shortcut disabled. */ +#define SPIS_SHORTS_END_ACQUIRE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: SPIS_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 10 : Enable interrupt on ACQUIRED event. */ +#define SPIS_INTENSET_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ +#define SPIS_INTENSET_ACQUIRED_Msk (0x1UL << SPIS_INTENSET_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ +#define SPIS_INTENSET_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENSET_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENSET_ACQUIRED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on END event. */ +#define SPIS_INTENSET_END_Pos (1UL) /*!< Position of END field. */ +#define SPIS_INTENSET_END_Msk (0x1UL << SPIS_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define SPIS_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: SPIS_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 10 : Disable interrupt on ACQUIRED event. */ +#define SPIS_INTENCLR_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ +#define SPIS_INTENCLR_ACQUIRED_Msk (0x1UL << SPIS_INTENCLR_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ +#define SPIS_INTENCLR_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENCLR_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENCLR_ACQUIRED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on END event. */ +#define SPIS_INTENCLR_END_Pos (1UL) /*!< Position of END field. */ +#define SPIS_INTENCLR_END_Msk (0x1UL << SPIS_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define SPIS_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: SPIS_SEMSTAT */ +/* Description: Semaphore status. */ + +/* Bits 1..0 : Semaphore status. */ +#define SPIS_SEMSTAT_SEMSTAT_Pos (0UL) /*!< Position of SEMSTAT field. */ +#define SPIS_SEMSTAT_SEMSTAT_Msk (0x3UL << SPIS_SEMSTAT_SEMSTAT_Pos) /*!< Bit mask of SEMSTAT field. */ +#define SPIS_SEMSTAT_SEMSTAT_Free (0x00UL) /*!< Semaphore is free. */ +#define SPIS_SEMSTAT_SEMSTAT_CPU (0x01UL) /*!< Semaphore is assigned to the CPU. */ +#define SPIS_SEMSTAT_SEMSTAT_SPIS (0x02UL) /*!< Semaphore is assigned to the SPIS. */ +#define SPIS_SEMSTAT_SEMSTAT_CPUPending (0x03UL) /*!< Semaphore is assigned to the SPIS, but a handover to the CPU is pending. */ + +/* Register: SPIS_STATUS */ +/* Description: Status from last transaction. */ + +/* Bit 1 : RX buffer overflow detected, and prevented. */ +#define SPIS_STATUS_OVERFLOW_Pos (1UL) /*!< Position of OVERFLOW field. */ +#define SPIS_STATUS_OVERFLOW_Msk (0x1UL << SPIS_STATUS_OVERFLOW_Pos) /*!< Bit mask of OVERFLOW field. */ +#define SPIS_STATUS_OVERFLOW_NotPresent (0UL) /*!< Error not present. */ +#define SPIS_STATUS_OVERFLOW_Present (1UL) /*!< Error present. */ +#define SPIS_STATUS_OVERFLOW_Clear (1UL) /*!< Clear on write. */ + +/* Bit 0 : TX buffer overread detected, and prevented. */ +#define SPIS_STATUS_OVERREAD_Pos (0UL) /*!< Position of OVERREAD field. */ +#define SPIS_STATUS_OVERREAD_Msk (0x1UL << SPIS_STATUS_OVERREAD_Pos) /*!< Bit mask of OVERREAD field. */ +#define SPIS_STATUS_OVERREAD_NotPresent (0UL) /*!< Error not present. */ +#define SPIS_STATUS_OVERREAD_Present (1UL) /*!< Error present. */ +#define SPIS_STATUS_OVERREAD_Clear (1UL) /*!< Clear on write. */ + +/* Register: SPIS_ENABLE */ +/* Description: Enable SPIS. */ + +/* Bits 2..0 : Enable or disable SPIS. */ +#define SPIS_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define SPIS_ENABLE_ENABLE_Msk (0x7UL << SPIS_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define SPIS_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIS. */ +#define SPIS_ENABLE_ENABLE_Enabled (0x02UL) /*!< Enable SPIS. */ + +/* Register: SPIS_MAXRX */ +/* Description: Maximum number of bytes in the receive buffer. */ + +/* Bits 7..0 : Maximum number of bytes in the receive buffer. */ +#define SPIS_MAXRX_MAXRX_Pos (0UL) /*!< Position of MAXRX field. */ +#define SPIS_MAXRX_MAXRX_Msk (0xFFUL << SPIS_MAXRX_MAXRX_Pos) /*!< Bit mask of MAXRX field. */ + +/* Register: SPIS_AMOUNTRX */ +/* Description: Number of bytes received in last granted transaction. */ + +/* Bits 7..0 : Number of bytes received in last granted transaction. */ +#define SPIS_AMOUNTRX_AMOUNTRX_Pos (0UL) /*!< Position of AMOUNTRX field. */ +#define SPIS_AMOUNTRX_AMOUNTRX_Msk (0xFFUL << SPIS_AMOUNTRX_AMOUNTRX_Pos) /*!< Bit mask of AMOUNTRX field. */ + +/* Register: SPIS_MAXTX */ +/* Description: Maximum number of bytes in the transmit buffer. */ + +/* Bits 7..0 : Maximum number of bytes in the transmit buffer. */ +#define SPIS_MAXTX_MAXTX_Pos (0UL) /*!< Position of MAXTX field. */ +#define SPIS_MAXTX_MAXTX_Msk (0xFFUL << SPIS_MAXTX_MAXTX_Pos) /*!< Bit mask of MAXTX field. */ + +/* Register: SPIS_AMOUNTTX */ +/* Description: Number of bytes transmitted in last granted transaction. */ + +/* Bits 7..0 : Number of bytes transmitted in last granted transaction. */ +#define SPIS_AMOUNTTX_AMOUNTTX_Pos (0UL) /*!< Position of AMOUNTTX field. */ +#define SPIS_AMOUNTTX_AMOUNTTX_Msk (0xFFUL << SPIS_AMOUNTTX_AMOUNTTX_Pos) /*!< Bit mask of AMOUNTTX field. */ + +/* Register: SPIS_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 2 : Serial clock (SCK) polarity. */ +#define SPIS_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ +#define SPIS_CONFIG_CPOL_Msk (0x1UL << SPIS_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ +#define SPIS_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ +#define SPIS_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ + +/* Bit 1 : Serial clock (SCK) phase. */ +#define SPIS_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ +#define SPIS_CONFIG_CPHA_Msk (0x1UL << SPIS_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ +#define SPIS_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ +#define SPIS_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ + +/* Bit 0 : Bit order. */ +#define SPIS_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ +#define SPIS_CONFIG_ORDER_Msk (0x1UL << SPIS_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ +#define SPIS_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ +#define SPIS_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ + +/* Register: SPIS_DEF */ +/* Description: Default character. */ + +/* Bits 7..0 : Default character. */ +#define SPIS_DEF_DEF_Pos (0UL) /*!< Position of DEF field. */ +#define SPIS_DEF_DEF_Msk (0xFFUL << SPIS_DEF_DEF_Pos) /*!< Bit mask of DEF field. */ + +/* Register: SPIS_ORC */ +/* Description: Over-read character. */ + +/* Bits 7..0 : Over-read character. */ +#define SPIS_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */ +#define SPIS_ORC_ORC_Msk (0xFFUL << SPIS_ORC_ORC_Pos) /*!< Bit mask of ORC field. */ + +/* Register: SPIS_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define SPIS_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define SPIS_POWER_POWER_Msk (0x1UL << SPIS_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define SPIS_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define SPIS_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: TEMP */ +/* Description: Temperature Sensor. */ + +/* Register: TEMP_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 0 : Enable interrupt on DATARDY event. */ +#define TEMP_INTENSET_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ +#define TEMP_INTENSET_DATARDY_Msk (0x1UL << TEMP_INTENSET_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ +#define TEMP_INTENSET_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TEMP_INTENSET_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TEMP_INTENSET_DATARDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: TEMP_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 0 : Disable interrupt on DATARDY event. */ +#define TEMP_INTENCLR_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ +#define TEMP_INTENCLR_DATARDY_Msk (0x1UL << TEMP_INTENCLR_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ +#define TEMP_INTENCLR_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TEMP_INTENCLR_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TEMP_INTENCLR_DATARDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: TEMP_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define TEMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define TEMP_POWER_POWER_Msk (0x1UL << TEMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define TEMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define TEMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: TIMER */ +/* Description: Timer 0. */ + +/* Register: TIMER_SHORTS */ +/* Description: Shortcuts for Timer. */ + +/* Bit 11 : Shortcut between CC[3] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE3_STOP_Pos (11UL) /*!< Position of COMPARE3_STOP field. */ +#define TIMER_SHORTS_COMPARE3_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE3_STOP_Pos) /*!< Bit mask of COMPARE3_STOP field. */ +#define TIMER_SHORTS_COMPARE3_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE3_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 10 : Shortcut between CC[2] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE2_STOP_Pos (10UL) /*!< Position of COMPARE2_STOP field. */ +#define TIMER_SHORTS_COMPARE2_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE2_STOP_Pos) /*!< Bit mask of COMPARE2_STOP field. */ +#define TIMER_SHORTS_COMPARE2_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE2_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 9 : Shortcut between CC[1] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE1_STOP_Pos (9UL) /*!< Position of COMPARE1_STOP field. */ +#define TIMER_SHORTS_COMPARE1_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE1_STOP_Pos) /*!< Bit mask of COMPARE1_STOP field. */ +#define TIMER_SHORTS_COMPARE1_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE1_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 8 : Shortcut between CC[0] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE0_STOP_Pos (8UL) /*!< Position of COMPARE0_STOP field. */ +#define TIMER_SHORTS_COMPARE0_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE0_STOP_Pos) /*!< Bit mask of COMPARE0_STOP field. */ +#define TIMER_SHORTS_COMPARE0_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE0_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between CC[3] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Pos (3UL) /*!< Position of COMPARE3_CLEAR field. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE3_CLEAR_Pos) /*!< Bit mask of COMPARE3_CLEAR field. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Shortcut between CC[2] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Pos (2UL) /*!< Position of COMPARE2_CLEAR field. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE2_CLEAR_Pos) /*!< Bit mask of COMPARE2_CLEAR field. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Shortcut between CC[1] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Pos (1UL) /*!< Position of COMPARE1_CLEAR field. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE1_CLEAR_Pos) /*!< Bit mask of COMPARE1_CLEAR field. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between CC[0] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Pos (0UL) /*!< Position of COMPARE0_CLEAR field. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE0_CLEAR_Pos) /*!< Bit mask of COMPARE0_CLEAR field. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: TIMER_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 19 : Enable interrupt on COMPARE[3] */ +#define TIMER_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define TIMER_INTENSET_COMPARE3_Msk (0x1UL << TIMER_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define TIMER_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 18 : Enable interrupt on COMPARE[2] */ +#define TIMER_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define TIMER_INTENSET_COMPARE2_Msk (0x1UL << TIMER_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define TIMER_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 17 : Enable interrupt on COMPARE[1] */ +#define TIMER_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define TIMER_INTENSET_COMPARE1_Msk (0x1UL << TIMER_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define TIMER_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 16 : Enable interrupt on COMPARE[0] */ +#define TIMER_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define TIMER_INTENSET_COMPARE0_Msk (0x1UL << TIMER_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define TIMER_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: TIMER_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 19 : Disable interrupt on COMPARE[3] */ +#define TIMER_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define TIMER_INTENCLR_COMPARE3_Msk (0x1UL << TIMER_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define TIMER_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 18 : Disable interrupt on COMPARE[2] */ +#define TIMER_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define TIMER_INTENCLR_COMPARE2_Msk (0x1UL << TIMER_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define TIMER_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 17 : Disable interrupt on COMPARE[1] */ +#define TIMER_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define TIMER_INTENCLR_COMPARE1_Msk (0x1UL << TIMER_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define TIMER_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 16 : Disable interrupt on COMPARE[0] */ +#define TIMER_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define TIMER_INTENCLR_COMPARE0_Msk (0x1UL << TIMER_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define TIMER_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: TIMER_MODE */ +/* Description: Timer Mode selection. */ + +/* Bit 0 : Select Normal or Counter mode. */ +#define TIMER_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define TIMER_MODE_MODE_Msk (0x1UL << TIMER_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ +#define TIMER_MODE_MODE_Timer (0UL) /*!< Timer in Normal mode. */ +#define TIMER_MODE_MODE_Counter (1UL) /*!< Timer in Counter mode. */ + +/* Register: TIMER_BITMODE */ +/* Description: Sets timer behaviour. */ + +/* Bits 1..0 : Sets timer behaviour ro be like the implementation of a timer with width as indicated. */ +#define TIMER_BITMODE_BITMODE_Pos (0UL) /*!< Position of BITMODE field. */ +#define TIMER_BITMODE_BITMODE_Msk (0x3UL << TIMER_BITMODE_BITMODE_Pos) /*!< Bit mask of BITMODE field. */ +#define TIMER_BITMODE_BITMODE_16Bit (0x00UL) /*!< 16-bit timer behaviour. */ +#define TIMER_BITMODE_BITMODE_08Bit (0x01UL) /*!< 8-bit timer behaviour. */ +#define TIMER_BITMODE_BITMODE_24Bit (0x02UL) /*!< 24-bit timer behaviour. */ +#define TIMER_BITMODE_BITMODE_32Bit (0x03UL) /*!< 32-bit timer behaviour. */ + +/* Register: TIMER_PRESCALER */ +/* Description: 4-bit prescaler to source clock frequency (max value 9). Source clock frequency is divided by 2^SCALE. */ + +/* Bits 3..0 : Timer PRESCALER value. Max value is 9. */ +#define TIMER_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ +#define TIMER_PRESCALER_PRESCALER_Msk (0xFUL << TIMER_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ + +/* Register: TIMER_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define TIMER_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define TIMER_POWER_POWER_Msk (0x1UL << TIMER_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define TIMER_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define TIMER_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: TWI */ +/* Description: Two-wire interface master 0. */ + +/* Register: TWI_SHORTS */ +/* Description: Shortcuts for TWI. */ + +/* Bit 1 : Shortcut between BB event and the STOP task. */ +#define TWI_SHORTS_BB_STOP_Pos (1UL) /*!< Position of BB_STOP field. */ +#define TWI_SHORTS_BB_STOP_Msk (0x1UL << TWI_SHORTS_BB_STOP_Pos) /*!< Bit mask of BB_STOP field. */ +#define TWI_SHORTS_BB_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TWI_SHORTS_BB_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between BB event and the SUSPEND task. */ +#define TWI_SHORTS_BB_SUSPEND_Pos (0UL) /*!< Position of BB_SUSPEND field. */ +#define TWI_SHORTS_BB_SUSPEND_Msk (0x1UL << TWI_SHORTS_BB_SUSPEND_Pos) /*!< Bit mask of BB_SUSPEND field. */ +#define TWI_SHORTS_BB_SUSPEND_Disabled (0UL) /*!< Shortcut disabled. */ +#define TWI_SHORTS_BB_SUSPEND_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: TWI_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 14 : Enable interrupt on BB event. */ +#define TWI_INTENSET_BB_Pos (14UL) /*!< Position of BB field. */ +#define TWI_INTENSET_BB_Msk (0x1UL << TWI_INTENSET_BB_Pos) /*!< Bit mask of BB field. */ +#define TWI_INTENSET_BB_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_BB_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_BB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 9 : Enable interrupt on ERROR event. */ +#define TWI_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define TWI_INTENSET_ERROR_Msk (0x1UL << TWI_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define TWI_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 7 : Enable interrupt on TXDSENT event. */ +#define TWI_INTENSET_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ +#define TWI_INTENSET_TXDSENT_Msk (0x1UL << TWI_INTENSET_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ +#define TWI_INTENSET_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_TXDSENT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on READY event. */ +#define TWI_INTENSET_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ +#define TWI_INTENSET_RXDREADY_Msk (0x1UL << TWI_INTENSET_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ +#define TWI_INTENSET_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_RXDREADY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on STOPPED event. */ +#define TWI_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ +#define TWI_INTENSET_STOPPED_Msk (0x1UL << TWI_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ +#define TWI_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: TWI_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 14 : Disable interrupt on BB event. */ +#define TWI_INTENCLR_BB_Pos (14UL) /*!< Position of BB field. */ +#define TWI_INTENCLR_BB_Msk (0x1UL << TWI_INTENCLR_BB_Pos) /*!< Bit mask of BB field. */ +#define TWI_INTENCLR_BB_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_BB_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_BB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 9 : Disable interrupt on ERROR event. */ +#define TWI_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define TWI_INTENCLR_ERROR_Msk (0x1UL << TWI_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define TWI_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 7 : Disable interrupt on TXDSENT event. */ +#define TWI_INTENCLR_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ +#define TWI_INTENCLR_TXDSENT_Msk (0x1UL << TWI_INTENCLR_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ +#define TWI_INTENCLR_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_TXDSENT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on RXDREADY event. */ +#define TWI_INTENCLR_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ +#define TWI_INTENCLR_RXDREADY_Msk (0x1UL << TWI_INTENCLR_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ +#define TWI_INTENCLR_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_RXDREADY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on STOPPED event. */ +#define TWI_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ +#define TWI_INTENCLR_STOPPED_Msk (0x1UL << TWI_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ +#define TWI_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: TWI_ERRORSRC */ +/* Description: Two-wire error source. Write error field to 1 to clear error. */ + +/* Bit 2 : NACK received after sending a data byte. */ +#define TWI_ERRORSRC_DNACK_Pos (2UL) /*!< Position of DNACK field. */ +#define TWI_ERRORSRC_DNACK_Msk (0x1UL << TWI_ERRORSRC_DNACK_Pos) /*!< Bit mask of DNACK field. */ +#define TWI_ERRORSRC_DNACK_NotPresent (0UL) /*!< Error not present. */ +#define TWI_ERRORSRC_DNACK_Present (1UL) /*!< Error present. */ +#define TWI_ERRORSRC_DNACK_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 1 : NACK received after sending the address. */ +#define TWI_ERRORSRC_ANACK_Pos (1UL) /*!< Position of ANACK field. */ +#define TWI_ERRORSRC_ANACK_Msk (0x1UL << TWI_ERRORSRC_ANACK_Pos) /*!< Bit mask of ANACK field. */ +#define TWI_ERRORSRC_ANACK_NotPresent (0UL) /*!< Error not present. */ +#define TWI_ERRORSRC_ANACK_Present (1UL) /*!< Error present. */ +#define TWI_ERRORSRC_ANACK_Clear (1UL) /*!< Clear error on write. */ + +/* Register: TWI_ENABLE */ +/* Description: Enable two-wire master. */ + +/* Bits 2..0 : Enable or disable W2M */ +#define TWI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define TWI_ENABLE_ENABLE_Msk (0x7UL << TWI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define TWI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled. */ +#define TWI_ENABLE_ENABLE_Enabled (0x05UL) /*!< Enabled. */ + +/* Register: TWI_RXD */ +/* Description: RX data register. */ + +/* Bits 7..0 : RX data from last transfer. */ +#define TWI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ +#define TWI_RXD_RXD_Msk (0xFFUL << TWI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ + +/* Register: TWI_TXD */ +/* Description: TX data register. */ + +/* Bits 7..0 : TX data for next transfer. */ +#define TWI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ +#define TWI_TXD_TXD_Msk (0xFFUL << TWI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ + +/* Register: TWI_FREQUENCY */ +/* Description: Two-wire frequency. */ + +/* Bits 31..0 : Two-wire master clock frequency. */ +#define TWI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ +#define TWI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << TWI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ +#define TWI_FREQUENCY_FREQUENCY_K100 (0x01980000UL) /*!< 100 kbps. */ +#define TWI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */ +#define TWI_FREQUENCY_FREQUENCY_K400 (0x06680000UL) /*!< 400 kbps. */ + +/* Register: TWI_ADDRESS */ +/* Description: Address used in the two-wire transfer. */ + +/* Bits 6..0 : Two-wire address. */ +#define TWI_ADDRESS_ADDRESS_Pos (0UL) /*!< Position of ADDRESS field. */ +#define TWI_ADDRESS_ADDRESS_Msk (0x7FUL << TWI_ADDRESS_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ + +/* Register: TWI_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define TWI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define TWI_POWER_POWER_Msk (0x1UL << TWI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define TWI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define TWI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: UART */ +/* Description: Universal Asynchronous Receiver/Transmitter. */ + +/* Register: UART_SHORTS */ +/* Description: Shortcuts for TWI. */ + +/* Bit 4 : Shortcut between NCTS event and the STOPRX task. */ +#define UART_SHORTS_NCTS_STOPRX_Pos (4UL) /*!< Position of NCTS_STOPRX field. */ +#define UART_SHORTS_NCTS_STOPRX_Msk (0x1UL << UART_SHORTS_NCTS_STOPRX_Pos) /*!< Bit mask of NCTS_STOPRX field. */ +#define UART_SHORTS_NCTS_STOPRX_Disabled (0UL) /*!< Shortcut disabled. */ +#define UART_SHORTS_NCTS_STOPRX_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between CTS event and the STARTRX task. */ +#define UART_SHORTS_CTS_STARTRX_Pos (3UL) /*!< Position of CTS_STARTRX field. */ +#define UART_SHORTS_CTS_STARTRX_Msk (0x1UL << UART_SHORTS_CTS_STARTRX_Pos) /*!< Bit mask of CTS_STARTRX field. */ +#define UART_SHORTS_CTS_STARTRX_Disabled (0UL) /*!< Shortcut disabled. */ +#define UART_SHORTS_CTS_STARTRX_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: UART_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 17 : Enable interrupt on RXTO event. */ +#define UART_INTENSET_RXTO_Pos (17UL) /*!< Position of RXTO field. */ +#define UART_INTENSET_RXTO_Msk (0x1UL << UART_INTENSET_RXTO_Pos) /*!< Bit mask of RXTO field. */ +#define UART_INTENSET_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_RXTO_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 9 : Enable interrupt on ERROR event. */ +#define UART_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define UART_INTENSET_ERROR_Msk (0x1UL << UART_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define UART_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 7 : Enable interrupt on TXRDY event. */ +#define UART_INTENSET_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ +#define UART_INTENSET_TXDRDY_Msk (0x1UL << UART_INTENSET_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ +#define UART_INTENSET_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_TXDRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on RXRDY event. */ +#define UART_INTENSET_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ +#define UART_INTENSET_RXDRDY_Msk (0x1UL << UART_INTENSET_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ +#define UART_INTENSET_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_RXDRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on NCTS event. */ +#define UART_INTENSET_NCTS_Pos (1UL) /*!< Position of NCTS field. */ +#define UART_INTENSET_NCTS_Msk (0x1UL << UART_INTENSET_NCTS_Pos) /*!< Bit mask of NCTS field. */ +#define UART_INTENSET_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_NCTS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on CTS event. */ +#define UART_INTENSET_CTS_Pos (0UL) /*!< Position of CTS field. */ +#define UART_INTENSET_CTS_Msk (0x1UL << UART_INTENSET_CTS_Pos) /*!< Bit mask of CTS field. */ +#define UART_INTENSET_CTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_CTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_CTS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: UART_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 17 : Disable interrupt on RXTO event. */ +#define UART_INTENCLR_RXTO_Pos (17UL) /*!< Position of RXTO field. */ +#define UART_INTENCLR_RXTO_Msk (0x1UL << UART_INTENCLR_RXTO_Pos) /*!< Bit mask of RXTO field. */ +#define UART_INTENCLR_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_RXTO_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 9 : Disable interrupt on ERROR event. */ +#define UART_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define UART_INTENCLR_ERROR_Msk (0x1UL << UART_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define UART_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 7 : Disable interrupt on TXRDY event. */ +#define UART_INTENCLR_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ +#define UART_INTENCLR_TXDRDY_Msk (0x1UL << UART_INTENCLR_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ +#define UART_INTENCLR_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_TXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on RXRDY event. */ +#define UART_INTENCLR_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ +#define UART_INTENCLR_RXDRDY_Msk (0x1UL << UART_INTENCLR_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ +#define UART_INTENCLR_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_RXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on NCTS event. */ +#define UART_INTENCLR_NCTS_Pos (1UL) /*!< Position of NCTS field. */ +#define UART_INTENCLR_NCTS_Msk (0x1UL << UART_INTENCLR_NCTS_Pos) /*!< Bit mask of NCTS field. */ +#define UART_INTENCLR_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_NCTS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on CTS event. */ +#define UART_INTENCLR_CTS_Pos (0UL) /*!< Position of CTS field. */ +#define UART_INTENCLR_CTS_Msk (0x1UL << UART_INTENCLR_CTS_Pos) /*!< Bit mask of CTS field. */ +#define UART_INTENCLR_CTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_CTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_CTS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: UART_ERRORSRC */ +/* Description: Error source. Write error field to 1 to clear error. */ + +/* Bit 3 : The serial data input is '0' for longer than the length of a data frame. */ +#define UART_ERRORSRC_BREAK_Pos (3UL) /*!< Position of BREAK field. */ +#define UART_ERRORSRC_BREAK_Msk (0x1UL << UART_ERRORSRC_BREAK_Pos) /*!< Bit mask of BREAK field. */ +#define UART_ERRORSRC_BREAK_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_BREAK_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_BREAK_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 2 : A valid stop bit is not detected on the serial data input after all bits in a character have been received. */ +#define UART_ERRORSRC_FRAMING_Pos (2UL) /*!< Position of FRAMING field. */ +#define UART_ERRORSRC_FRAMING_Msk (0x1UL << UART_ERRORSRC_FRAMING_Pos) /*!< Bit mask of FRAMING field. */ +#define UART_ERRORSRC_FRAMING_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_FRAMING_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_FRAMING_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 1 : A character with bad parity is received. Only checked if HW parity control is enabled. */ +#define UART_ERRORSRC_PARITY_Pos (1UL) /*!< Position of PARITY field. */ +#define UART_ERRORSRC_PARITY_Msk (0x1UL << UART_ERRORSRC_PARITY_Pos) /*!< Bit mask of PARITY field. */ +#define UART_ERRORSRC_PARITY_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_PARITY_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_PARITY_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 0 : A start bit is received while the previous data still lies in RXD. (Data loss). */ +#define UART_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */ +#define UART_ERRORSRC_OVERRUN_Msk (0x1UL << UART_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */ +#define UART_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */ + +/* Register: UART_ENABLE */ +/* Description: Enable UART and acquire IOs. */ + +/* Bits 2..0 : Enable or disable UART and acquire IOs. */ +#define UART_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define UART_ENABLE_ENABLE_Msk (0x7UL << UART_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define UART_ENABLE_ENABLE_Disabled (0x00UL) /*!< UART disabled. */ +#define UART_ENABLE_ENABLE_Enabled (0x04UL) /*!< UART enabled. */ + +/* Register: UART_RXD */ +/* Description: RXD register. On read action the buffer pointer is displaced. Once read the character is consummed. If read when no character available, the UART will stop working. */ + +/* Bits 7..0 : RX data from previous transfer. Double buffered. */ +#define UART_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ +#define UART_RXD_RXD_Msk (0xFFUL << UART_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ + +/* Register: UART_TXD */ +/* Description: TXD register. */ + +/* Bits 7..0 : TX data for transfer. */ +#define UART_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ +#define UART_TXD_TXD_Msk (0xFFUL << UART_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ + +/* Register: UART_BAUDRATE */ +/* Description: UART Baudrate. */ + +/* Bits 31..0 : UART baudrate. */ +#define UART_BAUDRATE_BAUDRATE_Pos (0UL) /*!< Position of BAUDRATE field. */ +#define UART_BAUDRATE_BAUDRATE_Msk (0xFFFFFFFFUL << UART_BAUDRATE_BAUDRATE_Pos) /*!< Bit mask of BAUDRATE field. */ +#define UART_BAUDRATE_BAUDRATE_Baud1200 (0x0004F000UL) /*!< 1200 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud2400 (0x0009D000UL) /*!< 2400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud4800 (0x0013B000UL) /*!< 4800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud9600 (0x00275000UL) /*!< 9600 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud14400 (0x003B0000UL) /*!< 14400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud19200 (0x004EA000UL) /*!< 19200 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud28800 (0x0075F000UL) /*!< 28800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud38400 (0x009D5000UL) /*!< 38400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud57600 (0x00EBF000UL) /*!< 57600 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud76800 (0x013A9000UL) /*!< 76800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud115200 (0x01D7E000UL) /*!< 115200 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud230400 (0x03AFB000UL) /*!< 230400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud250000 (0x04000000UL) /*!< 250000 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud460800 (0x075F7000UL) /*!< 460800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud921600 (0x0EBEDFA4UL) /*!< 921600 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud1M (0x10000000UL) /*!< 1M baud. */ + +/* Register: UART_CONFIG */ +/* Description: Configuration of parity and hardware flow control register. */ + +/* Bits 3..1 : Include parity bit. */ +#define UART_CONFIG_PARITY_Pos (1UL) /*!< Position of PARITY field. */ +#define UART_CONFIG_PARITY_Msk (0x7UL << UART_CONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */ +#define UART_CONFIG_PARITY_Excluded (0UL) /*!< Parity bit excluded. */ +#define UART_CONFIG_PARITY_Included (7UL) /*!< Parity bit included. */ + +/* Bit 0 : Hardware flow control. */ +#define UART_CONFIG_HWFC_Pos (0UL) /*!< Position of HWFC field. */ +#define UART_CONFIG_HWFC_Msk (0x1UL << UART_CONFIG_HWFC_Pos) /*!< Bit mask of HWFC field. */ +#define UART_CONFIG_HWFC_Disabled (0UL) /*!< Hardware flow control disabled. */ +#define UART_CONFIG_HWFC_Enabled (1UL) /*!< Hardware flow control enabled. */ + +/* Register: UART_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define UART_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define UART_POWER_POWER_Msk (0x1UL << UART_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define UART_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define UART_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: UICR */ +/* Description: User Information Configuration. */ + +/* Register: UICR_RBPCONF */ +/* Description: Readback protection configuration. */ + +/* Bits 15..8 : Readback protect all code in the device. */ +#define UICR_RBPCONF_PALL_Pos (8UL) /*!< Position of PALL field. */ +#define UICR_RBPCONF_PALL_Msk (0xFFUL << UICR_RBPCONF_PALL_Pos) /*!< Bit mask of PALL field. */ +#define UICR_RBPCONF_PALL_Disabled (0xFFUL) /*!< Disabled. */ +#define UICR_RBPCONF_PALL_Enabled (0x00UL) /*!< Enabled. */ + +/* Bits 7..0 : Readback protect region 0. Will be ignored if pre-programmed factory code is present on the chip. */ +#define UICR_RBPCONF_PR0_Pos (0UL) /*!< Position of PR0 field. */ +#define UICR_RBPCONF_PR0_Msk (0xFFUL << UICR_RBPCONF_PR0_Pos) /*!< Bit mask of PR0 field. */ +#define UICR_RBPCONF_PR0_Disabled (0xFFUL) /*!< Disabled. */ +#define UICR_RBPCONF_PR0_Enabled (0x00UL) /*!< Enabled. */ + +/* Register: UICR_XTALFREQ */ +/* Description: Reset value for CLOCK XTALFREQ register. */ + +/* Bits 7..0 : Reset value for CLOCK XTALFREQ register. */ +#define UICR_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ +#define UICR_XTALFREQ_XTALFREQ_Msk (0xFFUL << UICR_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ +#define UICR_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz Xtal is used. */ +#define UICR_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz Xtal is used. */ + +/* Register: UICR_FWID */ +/* Description: Firmware ID. */ + +/* Bits 15..0 : Identification number for the firmware loaded into the chip. */ +#define UICR_FWID_FWID_Pos (0UL) /*!< Position of FWID field. */ +#define UICR_FWID_FWID_Msk (0xFFFFUL << UICR_FWID_FWID_Pos) /*!< Bit mask of FWID field. */ + + +/* Peripheral: WDT */ +/* Description: Watchdog Timer. */ + +/* Register: WDT_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 0 : Enable interrupt on TIMEOUT event. */ +#define WDT_INTENSET_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ +#define WDT_INTENSET_TIMEOUT_Msk (0x1UL << WDT_INTENSET_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ +#define WDT_INTENSET_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ +#define WDT_INTENSET_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ +#define WDT_INTENSET_TIMEOUT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: WDT_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 0 : Disable interrupt on TIMEOUT event. */ +#define WDT_INTENCLR_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ +#define WDT_INTENCLR_TIMEOUT_Msk (0x1UL << WDT_INTENCLR_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ +#define WDT_INTENCLR_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ +#define WDT_INTENCLR_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ +#define WDT_INTENCLR_TIMEOUT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: WDT_RUNSTATUS */ +/* Description: Watchdog running status. */ + +/* Bit 0 : Watchdog running status. */ +#define WDT_RUNSTATUS_RUNSTATUS_Pos (0UL) /*!< Position of RUNSTATUS field. */ +#define WDT_RUNSTATUS_RUNSTATUS_Msk (0x1UL << WDT_RUNSTATUS_RUNSTATUS_Pos) /*!< Bit mask of RUNSTATUS field. */ +#define WDT_RUNSTATUS_RUNSTATUS_NotRunning (0UL) /*!< Watchdog timer is not running. */ +#define WDT_RUNSTATUS_RUNSTATUS_Running (1UL) /*!< Watchdog timer is running. */ + +/* Register: WDT_REQSTATUS */ +/* Description: Request status. */ + +/* Bit 7 : Request status for RR[7]. */ +#define WDT_REQSTATUS_RR7_Pos (7UL) /*!< Position of RR7 field. */ +#define WDT_REQSTATUS_RR7_Msk (0x1UL << WDT_REQSTATUS_RR7_Pos) /*!< Bit mask of RR7 field. */ +#define WDT_REQSTATUS_RR7_DisabledOrRequested (0UL) /*!< RR[7] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR7_EnabledAndUnrequested (1UL) /*!< RR[7] register is enabled and has not jet requested. */ + +/* Bit 6 : Request status for RR[6]. */ +#define WDT_REQSTATUS_RR6_Pos (6UL) /*!< Position of RR6 field. */ +#define WDT_REQSTATUS_RR6_Msk (0x1UL << WDT_REQSTATUS_RR6_Pos) /*!< Bit mask of RR6 field. */ +#define WDT_REQSTATUS_RR6_DisabledOrRequested (0UL) /*!< RR[6] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR6_EnabledAndUnrequested (1UL) /*!< RR[6] register is enabled and has not jet requested. */ + +/* Bit 5 : Request status for RR[5]. */ +#define WDT_REQSTATUS_RR5_Pos (5UL) /*!< Position of RR5 field. */ +#define WDT_REQSTATUS_RR5_Msk (0x1UL << WDT_REQSTATUS_RR5_Pos) /*!< Bit mask of RR5 field. */ +#define WDT_REQSTATUS_RR5_DisabledOrRequested (0UL) /*!< RR[5] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR5_EnabledAndUnrequested (1UL) /*!< RR[5] register is enabled and has not jet requested. */ + +/* Bit 4 : Request status for RR[4]. */ +#define WDT_REQSTATUS_RR4_Pos (4UL) /*!< Position of RR4 field. */ +#define WDT_REQSTATUS_RR4_Msk (0x1UL << WDT_REQSTATUS_RR4_Pos) /*!< Bit mask of RR4 field. */ +#define WDT_REQSTATUS_RR4_DisabledOrRequested (0UL) /*!< RR[4] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR4_EnabledAndUnrequested (1UL) /*!< RR[4] register is enabled and has not jet requested. */ + +/* Bit 3 : Request status for RR[3]. */ +#define WDT_REQSTATUS_RR3_Pos (3UL) /*!< Position of RR3 field. */ +#define WDT_REQSTATUS_RR3_Msk (0x1UL << WDT_REQSTATUS_RR3_Pos) /*!< Bit mask of RR3 field. */ +#define WDT_REQSTATUS_RR3_DisabledOrRequested (0UL) /*!< RR[3] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR3_EnabledAndUnrequested (1UL) /*!< RR[3] register is enabled and has not jet requested. */ + +/* Bit 2 : Request status for RR[2]. */ +#define WDT_REQSTATUS_RR2_Pos (2UL) /*!< Position of RR2 field. */ +#define WDT_REQSTATUS_RR2_Msk (0x1UL << WDT_REQSTATUS_RR2_Pos) /*!< Bit mask of RR2 field. */ +#define WDT_REQSTATUS_RR2_DisabledOrRequested (0UL) /*!< RR[2] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR2_EnabledAndUnrequested (1UL) /*!< RR[2] register is enabled and has not jet requested. */ + +/* Bit 1 : Request status for RR[1]. */ +#define WDT_REQSTATUS_RR1_Pos (1UL) /*!< Position of RR1 field. */ +#define WDT_REQSTATUS_RR1_Msk (0x1UL << WDT_REQSTATUS_RR1_Pos) /*!< Bit mask of RR1 field. */ +#define WDT_REQSTATUS_RR1_DisabledOrRequested (0UL) /*!< RR[1] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR1_EnabledAndUnrequested (1UL) /*!< RR[1] register is enabled and has not jet requested. */ + +/* Bit 0 : Request status for RR[0]. */ +#define WDT_REQSTATUS_RR0_Pos (0UL) /*!< Position of RR0 field. */ +#define WDT_REQSTATUS_RR0_Msk (0x1UL << WDT_REQSTATUS_RR0_Pos) /*!< Bit mask of RR0 field. */ +#define WDT_REQSTATUS_RR0_DisabledOrRequested (0UL) /*!< RR[0] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR0_EnabledAndUnrequested (1UL) /*!< RR[0] register is enabled and has not jet requested. */ + +/* Register: WDT_RREN */ +/* Description: Reload request enable. */ + +/* Bit 7 : Enable or disable RR[7] register. */ +#define WDT_RREN_RR7_Pos (7UL) /*!< Position of RR7 field. */ +#define WDT_RREN_RR7_Msk (0x1UL << WDT_RREN_RR7_Pos) /*!< Bit mask of RR7 field. */ +#define WDT_RREN_RR7_Disabled (0UL) /*!< RR[7] register is disabled. */ +#define WDT_RREN_RR7_Enabled (1UL) /*!< RR[7] register is enabled. */ + +/* Bit 6 : Enable or disable RR[6] register. */ +#define WDT_RREN_RR6_Pos (6UL) /*!< Position of RR6 field. */ +#define WDT_RREN_RR6_Msk (0x1UL << WDT_RREN_RR6_Pos) /*!< Bit mask of RR6 field. */ +#define WDT_RREN_RR6_Disabled (0UL) /*!< RR[6] register is disabled. */ +#define WDT_RREN_RR6_Enabled (1UL) /*!< RR[6] register is enabled. */ + +/* Bit 5 : Enable or disable RR[5] register. */ +#define WDT_RREN_RR5_Pos (5UL) /*!< Position of RR5 field. */ +#define WDT_RREN_RR5_Msk (0x1UL << WDT_RREN_RR5_Pos) /*!< Bit mask of RR5 field. */ +#define WDT_RREN_RR5_Disabled (0UL) /*!< RR[5] register is disabled. */ +#define WDT_RREN_RR5_Enabled (1UL) /*!< RR[5] register is enabled. */ + +/* Bit 4 : Enable or disable RR[4] register. */ +#define WDT_RREN_RR4_Pos (4UL) /*!< Position of RR4 field. */ +#define WDT_RREN_RR4_Msk (0x1UL << WDT_RREN_RR4_Pos) /*!< Bit mask of RR4 field. */ +#define WDT_RREN_RR4_Disabled (0UL) /*!< RR[4] register is disabled. */ +#define WDT_RREN_RR4_Enabled (1UL) /*!< RR[4] register is enabled. */ + +/* Bit 3 : Enable or disable RR[3] register. */ +#define WDT_RREN_RR3_Pos (3UL) /*!< Position of RR3 field. */ +#define WDT_RREN_RR3_Msk (0x1UL << WDT_RREN_RR3_Pos) /*!< Bit mask of RR3 field. */ +#define WDT_RREN_RR3_Disabled (0UL) /*!< RR[3] register is disabled. */ +#define WDT_RREN_RR3_Enabled (1UL) /*!< RR[3] register is enabled. */ + +/* Bit 2 : Enable or disable RR[2] register. */ +#define WDT_RREN_RR2_Pos (2UL) /*!< Position of RR2 field. */ +#define WDT_RREN_RR2_Msk (0x1UL << WDT_RREN_RR2_Pos) /*!< Bit mask of RR2 field. */ +#define WDT_RREN_RR2_Disabled (0UL) /*!< RR[2] register is disabled. */ +#define WDT_RREN_RR2_Enabled (1UL) /*!< RR[2] register is enabled. */ + +/* Bit 1 : Enable or disable RR[1] register. */ +#define WDT_RREN_RR1_Pos (1UL) /*!< Position of RR1 field. */ +#define WDT_RREN_RR1_Msk (0x1UL << WDT_RREN_RR1_Pos) /*!< Bit mask of RR1 field. */ +#define WDT_RREN_RR1_Disabled (0UL) /*!< RR[1] register is disabled. */ +#define WDT_RREN_RR1_Enabled (1UL) /*!< RR[1] register is enabled. */ + +/* Bit 0 : Enable or disable RR[0] register. */ +#define WDT_RREN_RR0_Pos (0UL) /*!< Position of RR0 field. */ +#define WDT_RREN_RR0_Msk (0x1UL << WDT_RREN_RR0_Pos) /*!< Bit mask of RR0 field. */ +#define WDT_RREN_RR0_Disabled (0UL) /*!< RR[0] register is disabled. */ +#define WDT_RREN_RR0_Enabled (1UL) /*!< RR[0] register is enabled. */ + +/* Register: WDT_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 3 : Configure the watchdog to pause or not while the CPU is halted by the debugger. */ +#define WDT_CONFIG_HALT_Pos (3UL) /*!< Position of HALT field. */ +#define WDT_CONFIG_HALT_Msk (0x1UL << WDT_CONFIG_HALT_Pos) /*!< Bit mask of HALT field. */ +#define WDT_CONFIG_HALT_Pause (0UL) /*!< Pause watchdog while the CPU is halted by the debugger. */ +#define WDT_CONFIG_HALT_Run (1UL) /*!< Do not pause watchdog while the CPU is halted by the debugger. */ + +/* Bit 0 : Configure the watchdog to pause or not while the CPU is sleeping. */ +#define WDT_CONFIG_SLEEP_Pos (0UL) /*!< Position of SLEEP field. */ +#define WDT_CONFIG_SLEEP_Msk (0x1UL << WDT_CONFIG_SLEEP_Pos) /*!< Bit mask of SLEEP field. */ +#define WDT_CONFIG_SLEEP_Pause (0UL) /*!< Pause watchdog while the CPU is asleep. */ +#define WDT_CONFIG_SLEEP_Run (1UL) /*!< Do not pause watchdog while the CPU is asleep. */ + +/* Register: WDT_RR */ +/* Description: Reload requests registers. */ + +/* Bits 31..0 : Reload register. */ +#define WDT_RR_RR_Pos (0UL) /*!< Position of RR field. */ +#define WDT_RR_RR_Msk (0xFFFFFFFFUL << WDT_RR_RR_Pos) /*!< Bit mask of RR field. */ +#define WDT_RR_RR_Reload (0x6E524635UL) /*!< Value to request a reload of the watchdog timer. */ + +/* Register: WDT_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define WDT_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define WDT_POWER_POWER_Msk (0x1UL << WDT_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define WDT_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define WDT_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/*lint --flb "Leave library region" */ +#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/nrf_error.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/nrf_error.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @defgroup nrf_error SoftDevice Global Error Codes
+ @{
+
+ @brief Global Error definitions
+*/
+
+/* Header guard */
+#ifndef NRF_ERROR_H__
+#define NRF_ERROR_H__
+
+/** @defgroup NRF_ERRORS_BASE Error Codes Base number definitions
+ * @{ */
+#define NRF_ERROR_BASE_NUM (0x0) ///< Global error base
+#define NRF_ERROR_SDM_BASE_NUM (0x1000) ///< SDM error base
+#define NRF_ERROR_SOC_BASE_NUM (0x2000) ///< SoC error base
+#define NRF_ERROR_STK_BASE_NUM (0x3000) ///< STK error base
+/** @} */
+
+#define NRF_SUCCESS (NRF_ERROR_BASE_NUM + 0) ///< Successful command
+#define NRF_ERROR_SVC_HANDLER_MISSING (NRF_ERROR_BASE_NUM + 1) ///< SVC handler is missing
+#define NRF_ERROR_SOFTDEVICE_NOT_ENABLED (NRF_ERROR_BASE_NUM + 2) ///< SoftDevice has not been enabled
+#define NRF_ERROR_INTERNAL (NRF_ERROR_BASE_NUM + 3) ///< Internal Error
+#define NRF_ERROR_NO_MEM (NRF_ERROR_BASE_NUM + 4) ///< No Memory for operation
+#define NRF_ERROR_NOT_FOUND (NRF_ERROR_BASE_NUM + 5) ///< Not found
+#define NRF_ERROR_NOT_SUPPORTED (NRF_ERROR_BASE_NUM + 6) ///< Not supported
+#define NRF_ERROR_INVALID_PARAM (NRF_ERROR_BASE_NUM + 7) ///< Invalid Parameter
+#define NRF_ERROR_INVALID_STATE (NRF_ERROR_BASE_NUM + 8) ///< Invalid state, operation disallowed in this state
+#define NRF_ERROR_INVALID_LENGTH (NRF_ERROR_BASE_NUM + 9) ///< Invalid Length
+#define NRF_ERROR_INVALID_FLAGS (NRF_ERROR_BASE_NUM + 10) ///< Invalid Flags
+#define NRF_ERROR_INVALID_DATA (NRF_ERROR_BASE_NUM + 11) ///< Invalid Data
+#define NRF_ERROR_DATA_SIZE (NRF_ERROR_BASE_NUM + 12) ///< Data size exceeds limit
+#define NRF_ERROR_TIMEOUT (NRF_ERROR_BASE_NUM + 13) ///< Operation timed out
+#define NRF_ERROR_NULL (NRF_ERROR_BASE_NUM + 14) ///< Null Pointer
+#define NRF_ERROR_FORBIDDEN (NRF_ERROR_BASE_NUM + 15) ///< Forbidden Operation
+#define NRF_ERROR_INVALID_ADDR (NRF_ERROR_BASE_NUM + 16) ///< Bad Memory Address
+#define NRF_ERROR_BUSY (NRF_ERROR_BASE_NUM + 17) ///< Busy
+
+#endif // NRF_ERROR_H__
+
+/**
+ @}
+*/
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/nrf_error_sdm.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/nrf_error_sdm.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @addtogroup nrf_sdm_api
+ @{
+ @defgroup nrf_sdm_error SoftDevice Manager Error Codes
+ @{
+
+ @brief Error definitions for the SDM API
+*/
+
+/* Header guard */
+#ifndef NRF_ERROR_SDM_H__
+#define NRF_ERROR_SDM_H__
+
+#include "nrf_error.h"
+
+#define NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN (NRF_ERROR_SDM_BASE_NUM + 0) ///< Unknown lfclk source
+#define NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION (NRF_ERROR_SDM_BASE_NUM + 1) ///< Incorrect interrupt configuration (can be caused by using illegal priority levels, or having enabled SoftDevice interrupts)
+#define NRF_ERROR_SDM_INCORRECT_CLENR0 (NRF_ERROR_SDM_BASE_NUM + 2) ///< Incorrect CLENR0 (can be caused by erronous SoftDevice flashing)
+
+#endif // NRF_ERROR_SDM_H__
+
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/nrf_error_soc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/nrf_error_soc.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @addtogroup nrf_soc_api
+ @{
+ @defgroup nrf_soc_error SoC Library Error Codes
+ @{
+
+ @brief Error definitions for the SoC library
+
+*/
+
+/* Header guard */
+#ifndef NRF_ERROR_SOC_H__
+#define NRF_ERROR_SOC_H__
+
+#include "nrf_error.h"
+
+/* Mutex Errors */
+#define NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN (NRF_ERROR_SOC_BASE_NUM + 0) ///< Mutex already taken
+
+/* NVIC errors */
+#define NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE (NRF_ERROR_SOC_BASE_NUM + 1) ///< NVIC interrupt not available
+#define NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED (NRF_ERROR_SOC_BASE_NUM + 2) ///< NVIC interrupt priority not allowed
+#define NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN (NRF_ERROR_SOC_BASE_NUM + 3) ///< NVIC should not return
+
+/* Power errors */
+#define NRF_ERROR_SOC_POWER_MODE_UNKNOWN (NRF_ERROR_SOC_BASE_NUM + 4) ///< Power mode unknown
+#define NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN (NRF_ERROR_SOC_BASE_NUM + 5) ///< Power POF threshold unknown
+#define NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN (NRF_ERROR_SOC_BASE_NUM + 6) ///< Power off should not return
+
+/* Rand errors */
+#define NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES (NRF_ERROR_SOC_BASE_NUM + 7) ///< RAND not enough values
+
+/* PPI errors */
+#define NRF_ERROR_SOC_PPI_INVALID_CHANNEL (NRF_ERROR_SOC_BASE_NUM + 8) ///< Invalid PPI Channel
+#define NRF_ERROR_SOC_PPI_INVALID_GROUP (NRF_ERROR_SOC_BASE_NUM + 9) ///< Invalid PPI Group
+
+#endif // NRF_ERROR_SOC_H__
+/**
+ @}
+ @}
+*/
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/nrf_sdm.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/nrf_sdm.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @defgroup nrf_sdm_api SoftDevice Manager API
+ @{
+
+ @brief APIs for SoftDevice management.
+
+*/
+
+/* Header guard */
+#ifndef NRF_SDM_H__
+#define NRF_SDM_H__
+
+#include "nrf_svc.h"
+#include "nrf51.h"
+#include "nrf_soc.h"
+#include "nrf_error_sdm.h"
+
+/** @addtogroup NRF_SDM_DEFINES Defines
+ * @{ */
+
+/**@brief SoftDevice Manager SVC Base number. */
+#define SDM_SVC_BASE 0x10
+
+/** @} */
+
+/** @addtogroup NRF_SDM_ENUMS Enumerations
+ * @{ */
+
+/**@brief nRF SoftDevice Manager API SVC numbers. */
+enum NRF_SD_SVCS
+{
+ SD_SOFTDEVICE_ENABLE = SDM_SVC_BASE, /**< ::sd_softdevice_enable */
+ SD_SOFTDEVICE_DISABLE, /**< ::sd_softdevice_disable */
+ SD_SOFTDEVICE_IS_ENABLED, /**< ::sd_softdevice_is_enabled */
+ SD_SOFTDEVICE_FORWARD_TO_APPLICATION,/**< ::sd_softdevice_forward_to_application */
+ SVC_SDM_LAST /**< Placeholder for last SDM SVC */
+};
+
+/**@brief Possible lfclk oscillator sources. */
+enum NRF_CLOCK_LFCLKSRCS
+{
+ NRF_CLOCK_LFCLKSRC_SYNTH_250_PPM, /**< LFCLK Synthesized from HFCLK. */
+ NRF_CLOCK_LFCLKSRC_XTAL_500_PPM, /**< LFCLK crystal oscillator 500 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_250_PPM, /**< LFCLK crystal oscillator 250 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_150_PPM, /**< LFCLK crystal oscillator 150 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_100_PPM, /**< LFCLK crystal oscillator 100 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_75_PPM, /**< LFCLK crystal oscillator 75 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_50_PPM, /**< LFCLK crystal oscillator 50 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_30_PPM, /**< LFCLK crystal oscillator 30 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, /**< LFCLK crystal oscillator 20 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_250MS_CALIBRATION, /**< LFCLK RC oscillator, 250ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_500MS_CALIBRATION, /**< LFCLK RC oscillator, 500ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_1000MS_CALIBRATION, /**< LFCLK RC oscillator, 1000ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_2000MS_CALIBRATION, /**< LFCLK RC oscillator, 2000ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_4000MS_CALIBRATION, /**< LFCLK RC oscillator, 4000ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_8000MS_CALIBRATION, /**< LFCLK RC oscillator, 8000ms calibration interval.*/
+};
+
+/** @} */
+
+/** @addtogroup NRF_SDM_TYPES Types
+ * @{ */
+
+/**@brief Type representing lfclk oscillator source. */
+typedef uint32_t nrf_clock_lfclksrc_t;
+
+
+/**@brief SoftDevice Assertion Handler type.
+ *
+ * When an unexpected error occurs within the SoftDevice it will call the SoftDevice assertion handler callback.
+ * The protocol stack will be in an undefined state when this happens and the only way to recover will be to
+ * perform a reset, using e.g. CMSIS NVIC_SystemReset().
+ *
+ * @note This callback is executed in HardFault context, thus SVC functions cannot be called from the SoftDevice assert callback.
+ *
+ * @param[in] pc The program counter of the failed assert.
+ * @param[in] line_number Line number where the assert failed.
+ * @param[in] file_name File name where the assert failed.
+ */
+typedef void (*softdevice_assertion_handler_t)(uint32_t pc, uint16_t line_number, const uint8_t * p_file_name);
+
+/** @} */
+
+/** @addtogroup NRF_SDM_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Enables the SoftDevice and by extension the protocol stack.
+ *
+ * Idempotent function to enable the SoftDevice.
+ *
+ * @note Some care must be taken if a low frequency clock source is already running when calling this function:
+ * If the LF clock has a different source then the one currently running, it will be stopped. Then, the new
+ * clock source will be started.
+ *
+ * @note This function has no effect when returning with an error.
+ *
+ * @post If return code is ::NRF_SUCCESS
+ * - SoC library and protocol stack APIs are made available
+ * - A portion of RAM will be unavailable (see relevant SDS documentation)
+ * - Some peripherals will be unavailable or available only through the SoC API (see relevant SDS documentation)
+ * - Interrupts will not arrive from protected peripherals or interrupts
+ * - nrf_nvic_ functions must be used instead of CMSIS NVIC_ functions for reliable usage of the softdevice.
+ * - Interrupt latency may be affected by the SoftDevice (see relevant SDS documentation)
+ * - Chosen low frequency clock source will be running
+ *
+ * @param clock_source Low frequency clock source and accuracy. (Note: In the case of XTAL source, the PPM accuracy of the chosen clock source must be greater than or equal to the actual characteristics of your XTAL clock).
+ * @param assertion_handler Callback for SoftDevice assertions.
+ *
+ * @retval ::NRF_SUCCESS
+ * @retval ::NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION SoftDeviceinterrupt is already enabled, or an enabled interrupt has an illegal priority level
+ * @retval ::NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN Unknown low frequency clock source selected
+ */
+SVCALL(SD_SOFTDEVICE_ENABLE, uint32_t, sd_softdevice_enable(nrf_clock_lfclksrc_t clock_source, softdevice_assertion_handler_t assertion_handler));
+
+/**@brief Disables the SoftDevice and by extension the protocol stack.
+ *
+ * Idempotent function to disable the SoftDevice.
+ *
+ * @post SoC library and protocol stack APIs are made unavailable.
+ * @post All interrupts that was protected by the SoftDevice will be disabled and initialized to priority 0 (highest).
+ * @post All peripherals used by the SoftDevice will be reset to default values.
+ * @post All of RAM become available.
+ * @post All interrupts are forwarded to the application.
+ * @post LFCLK source chosen in ::sd_softdevice_enable will be left running.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_SOFTDEVICE_DISABLE, uint32_t, sd_softdevice_disable(void));
+
+/**@brief Check if the SoftDevice is enabled.
+ *
+ * @param[out] p_softdevice_enabled If the SoftDevice is enabled: 1 else 0.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_SOFTDEVICE_IS_ENABLED, uint32_t, sd_softdevice_is_enabled(uint8_t * p_softdevice_enabled));
+
+/**@brief Start forwarding interrupts to application.
+ *
+ * This function is only intended to be called when a bootloader is enabled is used.
+ * The bootloader should call this right before it starts the application.
+ * It is recommended that all interrupt sources are off when this is called,
+ * or you could end up having interrupts in the application being executed before main() of the application.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_SOFTDEVICE_FORWARD_TO_APPLICATION, uint32_t, sd_softdevice_forward_to_application(void));
+
+/** @} */
+
+#endif // NRF_SDM_H__
+
+/**
+ @}
+*/
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/nrf_soc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/nrf_soc.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,777 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+
+/**
+ @defgroup nrf_soc_api SoC Library API
+ @{
+
+ @brief APIs for the SoC library.
+
+*/
+
+#ifndef NRF_SOC_H__
+#define NRF_SOC_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nrf_svc.h"
+#include "nrf51.h"
+#include "nrf51_bitfields.h"
+#include "nrf_error_soc.h"
+
+/** @addtogroup NRF_SOC_DEFINES Defines
+ * @{ */
+
+/**@brief The number of the lowest SVC number reserved for the SoC library. */
+#define SOC_SVC_BASE 0x20
+
+/**@brief Guranteed time for application to process radio inactive notification. */
+#define NRF_RADIO_NOTIFICATION_INACTIVE_GUARANTEED_TIME_US (62)
+
+#define SOC_ECB_KEY_LENGTH (16) /**< ECB key length. */
+#define SOC_ECB_CLEARTEXT_LENGTH (16) /**< ECB cleartext length. */
+#define SOC_ECB_CIPHERTEXT_LENGTH (SOC_ECB_CLEARTEXT_LENGTH) /**< ECB ciphertext length. */
+
+#define SD_EVT_IRQn (SWI2_IRQn) /**< SoftDevice Event IRQ number. Used for both protocol events and SoC events. */
+#define SD_EVT_IRQHandler (SWI2_IRQHandler) /**< SoftDevice Event IRQ handler. Used for both protocol events and SoC events. */
+#define RADIO_NOTIFICATION_IRQn (SWI1_IRQn) /**< The radio notification IRQ number. */
+#define RADIO_NOTIFICATION_IRQHandler (SWI1_IRQHandler) /**< The radio notification IRQ handler. */
+
+/** @} */
+
+/** @addtogroup NRF_SOC_TYPES Types
+ * @{ */
+
+/**@brief The SVC numbers used by the SVC functions in the SoC library. */
+enum NRF_SOC_SVCS
+{
+ SD_MUTEX_NEW = SOC_SVC_BASE,
+ SD_MUTEX_ACQUIRE,
+ SD_MUTEX_RELEASE,
+ SD_NVIC_ENABLEIRQ,
+ SD_NVIC_DISABLEIRQ,
+ SD_NVIC_GETPENDINGIRQ,
+ SD_NVIC_SETPENDINGIRQ,
+ SD_NVIC_CLEARPENDINGIRQ,
+ SD_NVIC_SETPRIORITY,
+ SD_NVIC_GETPRIORITY,
+ SD_NVIC_SYSTEMRESET,
+ SD_NVIC_CRITICAL_REGION_ENTER,
+ SD_NVIC_CRITICAL_REGION_EXIT,
+ SD_RAND_APPLICATION_POOL_CAPACITY,
+ SD_RAND_APPLICATION_BYTES_AVAILABLE,
+ SD_RAND_APPLICATION_GET_VECTOR,
+ SD_POWER_MODE_SET,
+ SD_POWER_SYSTEM_OFF,
+ SD_POWER_RESET_REASON_GET,
+ SD_POWER_RESET_REASON_CLR,
+ SD_POWER_POF_ENABLE,
+ SD_POWER_POF_THRESHOLD_SET,
+ SD_POWER_RAMON_SET,
+ SD_POWER_RAMON_CLR,
+ SD_POWER_RAMON_GET,
+ SD_POWER_GPREGRET_SET,
+ SD_POWER_GPREGRET_CLR,
+ SD_POWER_GPREGRET_GET,
+ SD_POWER_DCDC_MODE_SET,
+ SD_APP_EVT_WAIT,
+ SD_CLOCK_HFCLK_REQUEST,
+ SD_CLOCK_HFCLK_RELEASE,
+ SD_CLOCK_HFCLK_IS_RUNNING,
+ SD_PPI_CHANNEL_ENABLE_GET,
+ SD_PPI_CHANNEL_ENABLE_SET,
+ SD_PPI_CHANNEL_ENABLE_CLR,
+ SD_PPI_CHANNEL_ASSIGN,
+ SD_PPI_GROUP_TASK_ENABLE,
+ SD_PPI_GROUP_TASK_DISABLE,
+ SD_PPI_GROUP_ASSIGN,
+ SD_PPI_GROUP_GET,
+ SD_RADIO_NOTIFICATION_CFG_SET,
+ SD_ECB_BLOCK_ENCRYPT,
+ SD_RESERVED1,
+ SD_RESERVED2,
+ SD_RESERVED3,
+ SD_EVT_GET,
+ SD_TEMP_GET,
+ SD_FLASH_ERASE_PAGE,
+ SD_FLASH_WRITE,
+ SD_FLASH_PROTECT,
+ SVC_SOC_LAST
+};
+
+/**@brief Possible values of a ::nrf_mutex_t. */
+enum NRF_MUTEX_VALUES
+{
+ NRF_MUTEX_FREE,
+ NRF_MUTEX_TAKEN
+};
+
+/**@brief Possible values of ::nrf_app_irq_priority_t. */
+enum NRF_APP_PRIORITIES
+{
+ NRF_APP_PRIORITY_HIGH = 1,
+ NRF_APP_PRIORITY_LOW = 3
+};
+
+/**@brief Possible values of ::nrf_power_mode_t. */
+enum NRF_POWER_MODES
+{
+ NRF_POWER_MODE_CONSTLAT, /**< Constant latency mode. See power management in the reference manual. */
+ NRF_POWER_MODE_LOWPWR /**< Low power mode. See power management in the reference manual. */
+};
+
+
+/**@brief Possible values of ::nrf_power_failure_threshold_t */
+enum NRF_POWER_THRESHOLDS
+{
+ NRF_POWER_THRESHOLD_V21, /**< 2.1 Volts power failure threshold. */
+ NRF_POWER_THRESHOLD_V23, /**< 2.3 Volts power failure threshold. */
+ NRF_POWER_THRESHOLD_V25, /**< 2.5 Volts power failure threshold. */
+ NRF_POWER_THRESHOLD_V27 /**< 2.7 Volts power failure threshold. */
+};
+
+
+/**@brief Possible values of ::nrf_power_dcdc_mode_t. */
+enum NRF_POWER_DCDC_MODES
+{
+ NRF_POWER_DCDC_MODE_OFF, /**< The DCDC is always off. */
+ NRF_POWER_DCDC_MODE_ON, /**< The DCDC is always on. */
+ NRF_POWER_DCDC_MODE_AUTOMATIC /**< The DCDC is automatically managed. */
+};
+
+/**@brief Possible values of ::nrf_radio_notification_distance_t. */
+enum NRF_RADIO_NOTIFICATION_DISTANCES
+{
+ NRF_RADIO_NOTIFICATION_DISTANCE_NONE = 0, /**< The event does not have a notification. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_800US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_1740US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_2680US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_3620US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_4560US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_5500US /**< The distance from the active notification to start of radio activity. */
+};
+
+
+/**@brief Possible values of ::nrf_radio_notification_type_t. */
+enum NRF_RADIO_NOTIFICATION_TYPES
+{
+ NRF_RADIO_NOTIFICATION_TYPE_NONE = 0, /**< The event does not have a radio notification signal. */
+ NRF_RADIO_NOTIFICATION_TYPE_INT_ON_ACTIVE, /**< Using interrupt for notification when the radio will be enabled. */
+ NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE, /**< Using interrupt for notification when the radio has been disabled. */
+ NRF_RADIO_NOTIFICATION_TYPE_INT_ON_BOTH, /**< Using interrupt for notification both when the radio will be enabled and disabled. */
+};
+
+/**@brief SoC Events. */
+enum NRF_SOC_EVTS
+{
+ NRF_EVT_HFCLKSTARTED, /**< Event indicating that the HFCLK has started. */
+ NRF_EVT_POWER_FAILURE_WARNING, /**< Event indicating that a power failure warning has occurred. */
+ NRF_EVT_FLASH_OPERATION_SUCCESS, /**< Event indicating that the ongoing flash operation has completed successfully. */
+ NRF_EVT_FLASH_OPERATION_ERROR, /**< Event indicating that the ongoing flash operation has timed out with an error. */
+ NRF_EVT_RESERVED1,
+ NRF_EVT_RESERVED2,
+ NRF_EVT_RESERVED3,
+ NRF_EVT_RESERVED4,
+ NRF_EVT_RESERVED5,
+ NRF_EVT_NUMBER_OF_EVTS
+};
+
+/** @} */
+
+/** @addtogroup NRF_SOC_TYPES Types
+ * @{ */
+
+/**@brief Represents a mutex for use with the nrf_mutex functions.
+ * @note Accessing the value directly is not safe, use the mutex functions!
+ */
+typedef volatile uint8_t nrf_mutex_t;
+
+/**@brief The interrupt priorities available to the application while the softdevice is active. */
+typedef uint8_t nrf_app_irq_priority_t;
+
+/**@brief Represents a power mode, used in power mode functions */
+typedef uint8_t nrf_power_mode_t;
+
+/**@brief Represents a power failure threshold value. */
+typedef uint8_t nrf_power_failure_threshold_t;
+
+/**@brief Represents a DCDC mode value. */
+typedef uint32_t nrf_power_dcdc_mode_t;
+
+/**@brief Radio notification distances. */
+typedef uint8_t nrf_radio_notification_distance_t;
+
+/**@brief Radio notification types. */
+typedef uint8_t nrf_radio_notification_type_t;
+
+
+/**@brief AES ECB data structure */
+typedef struct
+{
+ uint8_t key[SOC_ECB_KEY_LENGTH]; /**< Encryption key. */
+ uint8_t cleartext[SOC_ECB_CLEARTEXT_LENGTH]; /**< Clear Text data. */
+ uint8_t ciphertext[SOC_ECB_CIPHERTEXT_LENGTH]; /**< Cipher Text data. */
+} nrf_ecb_hal_data_t;
+
+/** @} */
+
+/** @addtogroup NRF_SOC_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Initialize a mutex.
+ *
+ * @param[in] p_mutex Pointer to the mutex to initialize.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_MUTEX_NEW, uint32_t, sd_mutex_new(nrf_mutex_t * p_mutex));
+
+/**@brief Attempt to acquire a mutex.
+ *
+ * @param[in] p_mutex Pointer to the mutex to acquire.
+ *
+ * @retval ::NRF_SUCCESS The mutex was successfully acquired.
+ * @retval ::NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN The mutex could not be acquired.
+ */
+SVCALL(SD_MUTEX_ACQUIRE, uint32_t, sd_mutex_acquire(nrf_mutex_t * p_mutex));
+
+/**@brief Release a mutex.
+ *
+ * @param[in] p_mutex Pointer to the mutex to release.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_MUTEX_RELEASE, uint32_t, sd_mutex_release(nrf_mutex_t * p_mutex));
+
+/**@brief Enable External Interrupt.
+ * @note Corresponds to NVIC_EnableIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_EnableIRQ documentation in CMSIS.
+ *
+ * @retval ::NRF_SUCCESS The interrupt was enabled.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt has a priority not available for the application.
+ */
+SVCALL(SD_NVIC_ENABLEIRQ, uint32_t, sd_nvic_EnableIRQ(IRQn_Type IRQn));
+
+/**@brief Disable External Interrupt.
+ * @note Corresponds to NVIC_DisableIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_DisableIRQ documentation in CMSIS
+ *
+ * @retval ::NRF_SUCCESS The interrupt was disabled.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application.
+ */
+SVCALL(SD_NVIC_DISABLEIRQ, uint32_t, sd_nvic_DisableIRQ(IRQn_Type IRQn));
+
+/**@brief Get Pending Interrupt.
+ * @note Corresponds to NVIC_GetPendingIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_GetPendingIRQ documentation in CMSIS.
+ * @param[out] p_pending_irq Return value from NVIC_GetPendingIRQ.
+ *
+ * @retval ::NRF_SUCCESS The interrupt is available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ */
+SVCALL(SD_NVIC_GETPENDINGIRQ, uint32_t, sd_nvic_GetPendingIRQ(IRQn_Type IRQn, uint32_t * p_pending_irq));
+
+/**@brief Set Pending Interrupt.
+ * @note Corresponds to NVIC_SetPendingIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_SetPendingIRQ documentation in CMSIS.
+ *
+ * @retval ::NRF_SUCCESS The interrupt is set pending.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ */
+SVCALL(SD_NVIC_SETPENDINGIRQ, uint32_t, sd_nvic_SetPendingIRQ(IRQn_Type IRQn));
+
+/**@brief Clear Pending Interrupt.
+ * @note Corresponds to NVIC_ClearPendingIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_ClearPendingIRQ documentation in CMSIS.
+ *
+ * @retval ::NRF_SUCCESS The interrupt pending flag is cleared.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ */
+SVCALL(SD_NVIC_CLEARPENDINGIRQ, uint32_t, sd_nvic_ClearPendingIRQ(IRQn_Type IRQn));
+
+/**@brief Set Interrupt Priority.
+ * @note Corresponds to NVIC_SetPriority in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ * @pre{priority is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_SetPriority documentation in CMSIS.
+ * @param[in] priority A valid IRQ priority for use by the application.
+ *
+ * @retval ::NRF_SUCCESS The interrupt and priority level is available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt priority is not available for the application.
+ */
+SVCALL(SD_NVIC_SETPRIORITY, uint32_t, sd_nvic_SetPriority(IRQn_Type IRQn, nrf_app_irq_priority_t priority));
+
+/**@brief Get Interrupt Priority.
+ * @note Corresponds to NVIC_GetPriority in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_GetPriority documentation in CMSIS.
+ * @param[out] p_priority Return value from NVIC_GetPriority.
+ *
+ * @retval ::NRF_SUCCESS The interrupt priority is returned in p_priority.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE - IRQn is not available for the application.
+ */
+SVCALL(SD_NVIC_GETPRIORITY, uint32_t, sd_nvic_GetPriority(IRQn_Type IRQn, nrf_app_irq_priority_t * p_priority));
+
+/**@brief System Reset.
+ * @note Corresponds to NVIC_SystemReset in CMSIS.
+ *
+ * @retval ::NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN
+ */
+SVCALL(SD_NVIC_SYSTEMRESET, uint32_t, sd_nvic_SystemReset(void));
+
+/**@brief Enters critical region.
+ *
+ * @post Application interrupts will be disabled.
+ * @sa sd_nvic_critical_region_exit
+ *
+ * @param[out] p_is_nested_critical_region 1: If in a nested critical region.
+ * 0: Otherwise.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_NVIC_CRITICAL_REGION_ENTER, uint32_t, sd_nvic_critical_region_enter(uint8_t * p_is_nested_critical_region));
+
+/**@brief Exit critical region.
+ *
+ * @pre Application has entered a critical region using ::sd_nvic_critical_region_enter.
+ * @post If not in a nested critical region, the application interrupts will restored to the state before ::sd_nvic_critical_region_enter was called.
+ *
+ * @param[in] is_nested_critical_region If this is set to 1, the critical region won't be exited. @sa sd_nvic_critical_region_enter.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_NVIC_CRITICAL_REGION_EXIT, uint32_t, sd_nvic_critical_region_exit(uint8_t is_nested_critical_region));
+
+/**@brief Query the capacity of the application random pool.
+ *
+ * @param[out] p_pool_capacity The capacity of the pool.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_RAND_APPLICATION_POOL_CAPACITY, uint32_t, sd_rand_application_pool_capacity_get(uint8_t * p_pool_capacity));
+
+/**@brief Get number of random bytes available to the application.
+ *
+ * @param[out] p_bytes_available The number of bytes currently available in the pool.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_RAND_APPLICATION_BYTES_AVAILABLE, uint32_t, sd_rand_application_bytes_available_get(uint8_t * p_bytes_available));
+
+/**@brief Get random bytes from the application pool.
+
+ @param[out] p_buff Pointer to unit8_t buffer for storing the bytes.
+ @param[in] length Number of bytes to take from pool and place in p_buff.
+
+ @retval ::NRF_SUCCESS The requested bytes were written to p_buff.
+ @retval ::NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES No bytes were written to the buffer, because there were not enough bytes available.
+*/
+SVCALL(SD_RAND_APPLICATION_GET_VECTOR, uint32_t, sd_rand_application_vector_get(uint8_t * p_buff, uint8_t length));
+
+/**@brief Gets the reset reason register.
+ *
+ * @param[out] p_reset_reason Contents of the NRF_POWER->RESETREAS register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RESET_REASON_GET, uint32_t, sd_power_reset_reason_get(uint32_t * p_reset_reason));
+
+/**@brief Clears the bits of the reset reason register.
+ *
+ * @param[in] reset_reason_clr_msk Contains the bits to clear from the reset reason register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RESET_REASON_CLR, uint32_t, sd_power_reset_reason_clr(uint32_t reset_reason_clr_msk));
+
+/**@brief Sets the power mode when in CPU sleep.
+ *
+ * @param[in] power_mode The power mode to use when in CPU sleep. @sa sd_app_evt_wait
+ *
+ * @retval ::NRF_SUCCESS The power mode was set.
+ * @retval ::NRF_ERROR_SOC_POWER_MODE_UNKNOWN The power mode was unknown.
+ */
+SVCALL(SD_POWER_MODE_SET, uint32_t, sd_power_mode_set(nrf_power_mode_t power_mode));
+
+/**@brief Puts the chip in System OFF mode.
+ *
+ * @retval ::NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN
+ */
+SVCALL(SD_POWER_SYSTEM_OFF, uint32_t, sd_power_system_off(void));
+
+/**@brief Enables or disables the power-fail comparator.
+ *
+ * Enabling this will give a softdevice event (NRF_EVT_POWER_FAILURE_WARNING) when the power failure warning occurs.
+ * The event can be retrieved with sd_evt_get();
+ *
+ * @param[in] pof_enable True if the power-fail comparator should be enabled, false if it should be disabled.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_POF_ENABLE, uint32_t, sd_power_pof_enable(uint8_t pof_enable));
+
+/**@brief Sets the power-fail threshold value.
+ *
+ * @param[in] threshold The power-fail threshold value to use.
+ *
+ * @retval ::NRF_SUCCESS The power failure threshold was set.
+ * @retval ::NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN The power failure threshold is unknown.
+ */
+SVCALL(SD_POWER_POF_THRESHOLD_SET, uint32_t, sd_power_pof_threshold_set(nrf_power_failure_threshold_t threshold));
+
+/**@brief Sets bits in the NRF_POWER->RAMON register.
+ *
+ * @param[in] ramon Contains the bits needed to be set in the NRF_POWER->RAMON register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RAMON_SET, uint32_t, sd_power_ramon_set(uint32_t ramon));
+
+/** @brief Clears bits in the NRF_POWER->RAMON register.
+ *
+ * @param ramon Contains the bits needed to be cleared in the NRF_POWER->RAMON register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RAMON_CLR, uint32_t, sd_power_ramon_clr(uint32_t ramon));
+
+/**@brief Get contents of NRF_POWER->RAMON register, indicates power status of ram blocks.
+ *
+ * @param[out] p_ramon Content of NRF_POWER->RAMON register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RAMON_GET, uint32_t, sd_power_ramon_get(uint32_t * p_ramon));
+
+/**@brief Set bits in the NRF_POWER->GPREGRET register.
+ *
+ * @param[in] gpregret_msk Bits to be set in the GPREGRET register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_GPREGRET_SET, uint32_t, sd_power_gpregret_set(uint32_t gpregret_msk));
+
+/**@brief Clear bits in the NRF_POWER->GPREGRET register.
+ *
+ * @param[in] gpregret_msk Bits to be clear in the GPREGRET register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_GPREGRET_CLR, uint32_t, sd_power_gpregret_clr(uint32_t gpregret_msk));
+
+/**@brief Get contents of the NRF_POWER->GPREGRET register.
+ *
+ * @param[out] p_gpregret Contents of the GPREGRET register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_GPREGRET_GET, uint32_t, sd_power_gpregret_get(uint32_t *p_gpregret));
+
+/**@brief Sets the DCDC mode.
+ *
+ * Depending on the internal state of the SoftDevice, the mode change may not happen immediately.
+ * The DCDC mode switch will be blocked when occurring in close proximity to radio transmissions. When
+ * the radio transmission is done, the last mode will be used.
+ *
+ * @param[in] dcdc_mode The mode of the DCDC.
+ *
+ * @retval ::NRF_SUCCESS
+ * @retval ::NRF_ERROR_INVALID_PARAM The DCDC mode is invalid.
+ */
+SVCALL(SD_POWER_DCDC_MODE_SET, uint32_t, sd_power_dcdc_mode_set(nrf_power_dcdc_mode_t dcdc_mode));
+
+/**@brief Request the high frequency crystal oscillator.
+ *
+ * Will start the high frequency crystal oscillator, the startup time of the crystal varies
+ * and the ::sd_clock_hfclk_is_running function can be polled to check if it has started.
+ *
+ * @see sd_clock_hfclk_is_running
+ * @see sd_clock_hfclk_release
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_CLOCK_HFCLK_REQUEST, uint32_t, sd_clock_hfclk_request(void));
+
+/**@brief Releases the high frequency crystal oscillator.
+ *
+ * Will stop the high frequency crystal oscillator, this happens immediately.
+ *
+ * @see sd_clock_hfclk_is_running
+ * @see sd_clock_hfclk_request
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_CLOCK_HFCLK_RELEASE, uint32_t, sd_clock_hfclk_release(void));
+
+/**@brief Checks if the high frequency crystal oscillator is running.
+ *
+ * @see sd_clock_hfclk_request
+ * @see sd_clock_hfclk_release
+ *
+ * @param[out] p_is_running 1 if the external crystal oscillator is running, 0 if not.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_CLOCK_HFCLK_IS_RUNNING, uint32_t, sd_clock_hfclk_is_running(uint32_t * p_is_running));
+
+/**@brief Waits for an application event.
+ *
+ * An application event is either an application interrupt or a pended interrupt when the
+ * interrupt is disabled. When the interrupt is enabled it will be taken immediately since
+ * this function will wait in thread mode, then the execution will return in the application's
+ * main thread. When an interrupt is disabled and gets pended it will return to the application's
+ * thread main. The application must ensure that the pended flag is cleared using
+ * ::sd_nvic_ClearPendingIRQ in order to sleep using this function. This is only necessary for
+ * disabled interrupts, as the interrupt handler will clear the pending flag automatically for
+ * enabled interrupts.
+ *
+ * In order to wake up from disabled interrupts, the SEVONPEND flag has to be set in the Cortex-M0
+ * System Control Register (SCR). @sa CMSIS_SCB
+ *
+ * @note If an application interrupt has happened since the last time sd_app_evt_wait was
+ * called this function will return immediately and not go to sleep. This is to avoid race
+ * conditions that can occur when a flag is updated in the interrupt handler and processed
+ * in the main loop.
+ *
+ * @post An application interrupt has happened or a interrupt pending flag is set.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_APP_EVT_WAIT, uint32_t, sd_app_evt_wait(void));
+
+/**@brief Get PPI channel enable register contents.
+ *
+ * @param[out] p_channel_enable The contents of the PPI CHEN register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_CHANNEL_ENABLE_GET, uint32_t, sd_ppi_channel_enable_get(uint32_t * p_channel_enable));
+
+/**@brief Set PPI channel enable register.
+ *
+ * @param[in] channel_enable_set_msk Mask containing the bits to set in the PPI CHEN register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_CHANNEL_ENABLE_SET, uint32_t, sd_ppi_channel_enable_set(uint32_t channel_enable_set_msk));
+
+/**@brief Clear PPI channel enable register.
+ *
+ * @param[in] channel_enable_clr_msk Mask containing the bits to clear in the PPI CHEN register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_CHANNEL_ENABLE_CLR, uint32_t, sd_ppi_channel_enable_clr(uint32_t channel_enable_clr_msk));
+
+/**@brief Assign endpoints to a PPI channel.
+ *
+ * @param[in] channel_num Number of the PPI channel to assign.
+ * @param[in] evt_endpoint Event endpoint of the PPI channel.
+ * @param[in] task_endpoint Task endpoint of the PPI channel.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_CHANNEL The channel number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_CHANNEL_ASSIGN, uint32_t, sd_ppi_channel_assign(uint8_t channel_num, const volatile void * evt_endpoint, const volatile void * task_endpoint));
+
+/**@brief Task to enable a channel group.
+ *
+ * @param[in] group_num Number of the channel group.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_GROUP_TASK_ENABLE, uint32_t, sd_ppi_group_task_enable(uint8_t group_num));
+
+/**@brief Task to disable a channel group.
+ *
+ * @param[in] group_num Number of the PPI group.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_GROUP_TASK_DISABLE, uint32_t, sd_ppi_group_task_disable(uint8_t group_num));
+
+/**@brief Assign PPI channels to a channel group.
+ *
+ * @param[in] group_num Number of the channel group.
+ * @param[in] channel_msk Mask of the channels to assign to the group.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_GROUP_ASSIGN, uint32_t, sd_ppi_group_assign(uint8_t group_num, uint32_t channel_msk));
+
+/**@brief Gets the PPI channels of a channel group.
+ *
+ * @param[in] group_num Number of the channel group.
+ * @param[out] p_channel_msk Mask of the channels assigned to the group.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_GROUP_GET, uint32_t, sd_ppi_group_get(uint8_t group_num, uint32_t * p_channel_msk));
+
+/**@brief Configures the Radio Notification signal.
+ *
+ * @note
+ * - The notification signal latency depends on the interrupt priority settings of SWI used
+ * for notification signal.
+ * - In the period between the ACTIVE signal and the start of the Radio Event, the SoftDevice
+ * will interrupt the application to do Radio Event preparation.
+ * - Using the Radio Notification feature may limit the bandwidth, as the SoftDevice may have
+ * to shorten the connection events to have time for the Radio Notification signals.
+ *
+ * @param[in] type Type of notification signal.
+ * @ref NRF_RADIO_NOTIFICATION_TYPE_NONE shall be used to turn off radio
+ * notification. Using @ref NRF_RADIO_NOTIFICATION_DISTANCE_NONE is
+ * recommended (but not required) to be used with
+ * @ref NRF_RADIO_NOTIFICATION_TYPE_NONE.
+ *
+ * @param[in] distance Distance between the notification signal and start of radio activity.
+ * This parameter is ignored when @ref NRF_RADIO_NOTIFICATION_TYPE_NONE or
+ * @ref NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE is used.
+ *
+ * @retval ::NRF_ERROR_INVALID_PARAM The group number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_RADIO_NOTIFICATION_CFG_SET, uint32_t, sd_radio_notification_cfg_set(nrf_radio_notification_type_t type, nrf_radio_notification_distance_t distance));
+
+/**@brief Encrypts a block according to the specified parameters.
+ *
+ * 128-bit AES encryption.
+ *
+ * @param[in, out] p_ecb_data Pointer to the ECB parameters' struct (two input
+ * parameters and one output parameter).
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_ECB_BLOCK_ENCRYPT, uint32_t, sd_ecb_block_encrypt(nrf_ecb_hal_data_t * p_ecb_data));
+
+/**@brief Gets any pending events generated by the SoC API.
+ *
+ * The application should keep calling this function to get events, until ::NRF_ERROR_NOT_FOUND is returned.
+ *
+ * @param[out] p_evt_id Set to one of the values in @ref NRF_SOC_EVTS, if any events are pending.
+ *
+ * @retval ::NRF_SUCCESS An event was pending. The event id is written in the p_evt_id parameter.
+ * @retval ::NRF_ERROR_NOT_FOUND No pending events.
+ */
+SVCALL(SD_EVT_GET, uint32_t, sd_evt_get(uint32_t * p_evt_id));
+
+/**@brief Get the temperature measured on the chip
+ *
+ * This function will block until the temperature measurement is done.
+ * It takes around 50us from call to return.
+ *
+ * @note Pan #28 in PAN-028 v 1.6 "Negative measured values are not represented correctly" is corrected by this function.
+ *
+ * @param[out] p_temp Result of temperature measurement. Die temperature in 0.25 degrees celsius.
+ *
+ * @retval ::NRF_SUCCESS A temperature measurement was done, and the temperature was written to temp
+ */
+SVCALL(SD_TEMP_GET, uint32_t, sd_temp_get(int32_t * p_temp));
+
+/**@brief Flash Write
+ *
+ * Commands to write a buffer to flash
+ *
+ * This call initiates the flash access command, and its completion will be communicated to the
+ * application with exactly one of the following events:
+ * - NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed.
+ * - NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started.
+ *
+ * @note
+ * - This call takes control over the radio and the CPU during flash erase and write to make sure that
+ * they will not interfere with the flash access. This means that all interrupts will be blocked
+ * for a predictable time (depending on the NVMC specification in nRF51 Series Reference Manual
+ * and the command parameters).
+ *
+ *
+ * @param[in] p_dst Pointer to start of flash location to be written.
+ * @param[in] p_src Pointer to buffer with data to be written
+ * @param[in] size Number of 32-bit words to write. Maximum size is 256 32bit words.
+ *
+ * @retval ::NRF_ERROR_INVALID_ADDR Tried to write to a non existing flash address, or p_dst or p_src was unaligned.
+ * @retval ::NRF_ERROR_BUSY The previous command has not yet completed.
+ * @retval ::NRF_ERROR_INVALID_LENGTH Size was 0, or more than 256 words.
+ * @retval ::NRF_ERROR_FORBIDDEN Tried to write to or read from protected location.
+ * @retval ::NRF_SUCCESS The command was accepted.
+ */
+SVCALL(SD_FLASH_WRITE, uint32_t, sd_flash_write(uint32_t * const p_dst, uint32_t const * const p_src, uint32_t size));
+
+
+/**@brief Flash Erase page
+ *
+ * Commands to erase a flash page
+ *
+ * This call initiates the flash access command, and its completion will be communicated to the
+ * application with exactly one of the following events:
+ * - NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed.
+ * - NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started.
+ *
+ * @note
+ * - This call takes control over the radio and the CPU during flash erase and write to make sure that
+ * they will not interfere with the flash access. This means that all interrupts will be blocked
+ * for a predictable time (depending on the NVMC specification in nRF51 Series Reference Manual
+ * and the command parameters).
+ *
+ *
+ * @param[in] page_number Pagenumber of the page to erase
+ * @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error.
+ * @retval ::NRF_ERROR_INVALID_ADDR Tried to erase to a non existing flash page.
+ * @retval ::NRF_ERROR_BUSY The previous command has not yet completed.
+ * @retval ::NRF_ERROR_FORBIDDEN Tried to erase a protected page.
+ * @retval ::NRF_SUCCESS The command was accepted.
+ */
+SVCALL(SD_FLASH_ERASE_PAGE, uint32_t, sd_flash_page_erase(uint32_t page_number));
+
+
+/**@brief Flash Protection set
+ *
+ * Commands to set the flash protection registers PROTENSETx
+ *
+ * @note To read the values in PROTENSETx you can read them directly. They are only write-protected.
+ *
+ * @param[in] protenset0 Value to be written to PROTENSET0
+ * @param[in] protenset1 Value to be written to PROTENSET1
+ *
+ * @retval ::NRF_ERROR_FORBIDDEN Tried to protect the SoftDevice
+ * @retval ::NRF_SUCCESS Values successfully written to PROTENSETx
+ */
+SVCALL(SD_FLASH_PROTECT, uint32_t, sd_flash_protect(uint32_t protenset0, uint32_t protenset1));
+
+
+/** @} */
+
+#endif // NRF_SOC_H__
+
+/**
+ @}
+ */
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/nrf_svc.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/nrf_svc.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,33 @@
+#ifndef NRF_SVC__
+#define NRF_SVC__
+
+#ifdef SVCALL_AS_NORMAL_FUNCTION
+#define SVCALL(number, return_type, signature) return_type signature
+#else
+
+#ifndef SVCALL
+#if defined (__CC_ARM)
+#define SVCALL(number, return_type, signature) return_type __svc(number) signature
+#elif defined (__GNUC__)
+#define SVCALL(number, return_type, signature) \
+ _Pragma("GCC diagnostic ignored \"-Wreturn-type\"") \
+ _Pragma("GCC diagnostic ignored \"-Wunused-function\"") \
+ __attribute__((naked)) static return_type signature \
+ { \
+ __asm( \
+ "svc %0\n" \
+ "bx r14" : : "I" (number) : "r0" \
+ ); \
+ }
+#elif defined (__ICCARM__)
+#define PRAGMA(x) _Pragma(#x)
+#define SVCALL(number, return_type, signature) \
+PRAGMA(swi_number = number) \
+ __swi return_type signature;
+#else
+#define SVCALL(number, return_type, signature) return_type signature
+#endif
+#endif // SVCALL
+
+#endif // SVCALL_AS_NORMAL_FUNCTION
+#endif // NRF_SVC__
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/objects.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/objects.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,72 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct serial_s {
+ NRF_UART_Type *uart;
+ int index;
+};
+
+struct spi_s {
+ NRF_SPI_Type *spi;
+ NRF_SPIS_Type *spis;
+};
+
+struct port_s {
+ __IO uint32_t *reg_cnf;
+ __IO uint32_t *reg_out;
+ __I uint32_t *reg_in;
+ PortName port;
+ uint32_t mask;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+};
+
+struct i2c_s {
+ NRF_TWI_Type *i2c;
+ PinName sda;
+ PinName scl;
+ int freq;
+};
+
+struct analogin_s {
+ ADCName adc;
+};
+
+struct gpio_irq_s {
+ uint32_t ch;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/s110_nrf51822_6.0.0_softdevice.hex --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed/TARGET_NRF51822/s110_nrf51822_6.0.0_softdevice.hex Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,4835 @@ +:020000040000FA +:10000000481C0020992B0100F1160100CF2A0100A5 +:1000100000000000000000000000000000000000E0 +:100020000000000000000000000000000D2C010096 +:100030000000000000000000F1160100F1160100B0 +:10004000752C01007B2C0100F1160100F116010056 +:10005000F1160100F1160100F1160100F116010080 +:10006000812C0100F1160100F1160100872C01001E +:10007000F11601008D2C0100B9020000FF81000083 +:10008000F1160100F1160100F1160100F116010050 +:10009000F1160100F1160100F1160100F116010040 +:1000A000932C0100992C0100F1160100F1160100BA +:1000B000F1160100F1160100F1160100F116010020 +:1000C00000F002F812F04FFD0CA030C808382418D8 +:1000D0002D18A246671EAB4654465D46AC4201D180 +:1000E00012F041FD7E460F3E0FCCB646012633424C +:1000F00000D0FB1AA246AB46334318475C2C0100E4 +:100100008C2C0100103A02D378C878C1FAD8520773 +:1001100001D330C830C101D504680C6070470000BD +:100120000023002400250026103A01D378C1FBD813 +:10013000520700D330C100D50B6070471FB5C046D1 +:10014000C04612F093FC04B00FB41FBD826902498F +:100150008161024810447047610100000100000005 +:1001600001B41EB400B50FF067FE01B401988646D5 +:1001700001BC01B01EBD0000F0B4404649465246E5 +:100180005B460FB402A0013001B50648004700BF2E +:1001900001BC86460FBC8046894692469B46F0BC11 +:1001A00070470000C1000000401E00BF00BF00BF3C +:1001B00000BF00BF00BF00BF00BF00BF00BF00BF47 +:1001C00000BFF1D17047000070B505460C461646D9 +:1001D00002E00FCC0FC5103E102EFAD2082E02D32B +:1001E00003CC03C5083E042E07D301CC01C5361F3E +:1001F00003E021782970641C6D1C761EF9D270BD55 +:100200008307FF22DB0E9A408907090E99400028D8 +:100210000BDA0007000F0838830828489B001B18DA +:10022000D86990430843D8617047830824489B00ED +:100230001B181868904308431860704710B50446AF +:1002400000210120FFF7DCFF00211820FFF7D8FF75 +:1002500000210B20FFF7D4FF02211920FFF7D0FF68 +:1002600002210D20FFF7CCFF02210E20FFF7C8FF6F +:1002700002210F20FFF7C4FF0221C81FFFF7C0FFB4 +:1002800003211620FFF7BCFF03211520FFF7B8FF5D +:10029000204600F019F8002010BD49210180704768 +:1002A00010B500F04FF810BD0648704710B500F0CB +:1002B0004AF810BD704770477047000000ED00E03D +:1002C00000E400E003F900C330B50546384C95B0B2 +:1002D00006202070A01CFFF7E0FF5920A0803548C1 +:1002E00061880069344A80B2D269344B120C98425A +:1002F00004D18A4208D032A1B42003E0884203D05E +:100300002FA1B72012F0DDFB334802F057F9044665 +:10031000072000F0D7F92146254800F015FA6D1E98 +:10032000072D0AD8302168460170857001F0CCF99C +:10033000002802D009A800F065FC204601F0BBFAB5 +:1003400015B030BD704710B50C46014660390B2919 +:1003500003D8214601F01CFF06E001466C39032951 +:1003600004D8214601F047FF206010BD01467039D6 +:100370001F2903D8214600F03FF8F5E701469039E0 +:100380000F2903D8214600F0C1F8EDE70146A03956 +:100390000F2903D8214600F029F9E5E70146B039D5 +:1003A0000F2903D8214600F006F9DDE70120DBE73D +:1003B000140000200010001040000010FFFF00009B +:1003C0007372635C636F72655F66756E6374696F89 +:1003D0006E732E63000000006D1C000070477047B4 +:1003E00070477047704770477047704710B50128D5 +:1003F00001D100F0CEF910BD10B57038030012F035 +:1004000065FC150C10141C20232A31363B3F434752 +:100410004E535A626A72797E8300086803F0FDFBCE +:1004200010BD086803F050FC10BD0C790B7B8A6886 +:100430000868214603F06EFC10BD086803F0E8FC74 +:1004400010BD03F0BAF910BD08884A6880B21146A1 +:1004500003F06CFE10BD0A790888114680B203F0E3 +:10046000BCFE10BD087840B203F0C7FE10BD08887E +:1004700080B203F0E3FE10BD086803F0F2FE10BD89 +:10048000086803F00AFF10BD086803F036FF10BDCE +:10049000088982B209C9194603F061FF10BD05C978 +:1004A000114603F0B0FF10BD08884A6880B21146BB +:1004B00003F0CEFF10BD0B7908888A6880B2194618 +:1004C00004F010F810BD0B7908888A6880B21946CC +:1004D00004F0B9F810BD08884B688A6880B21946E4 +:1004E00004F0FAF810BD08884A6880B2114604F09A +:1004F00045F910BD088880B204F05EF910BD088887 +:1005000080B204F07CF910BD012010BD10B5903808 +:10051000030012F0DBFB09060F161D242C363F46A4 +:100520004E0088888A6883B20888194680B204F031 +:1005300030FD10BD08884A6880B2114604F086FD7F +:1005400010BD08884A6880B2114604F0C9FD10BD8C +:1005500008884A6880B2114604F0FFFD10BD088883 +:100560004B688A6880B2194604F030FE10BD0889D5 +:1005700082B2888883B20888194680B204F065FE8A +:1005800010BD08894B6882B20888194680B204F011 +:100590009AFE10BD08884A6880B2114604F0CAFE6F +:1005A00010BD888882B20888114680B204F05EFFD0 +:1005B00010BD012010BD10B5B02805D0B12808D05D +:1005C000B2280BD0012010BD088880B205F042FA95 +:1005D00010BD088880B205F06DFA10BD08884B6820 +:1005E0008A6880B2194605F076FA10BD10B5A038B9 +:1005F000030012F06BFB0B070E172028323C434D13 +:10060000545D65004B6808788A68194606F090FDCD +:1006100010BD88888A6883B20888194680B206F0BF +:100620009CFD10BD08884C68CB688A6880B2214662 +:1006300006F0A3FD10BD08884B688A6880B2194691 +:1006400006F0BDFD10BD8888CB6884B208888A6832 +:1006500080B2214606F0DDFD10BD8888CB6884B2EB +:1006600008888A6880B2214606F0E3FD10BD08883C +:100670004A6880B2114606F00BFE10BD088982B2AE +:10068000888883B20888194680B206F00BFE10BD38 +:1006900008884A6880B2114606F024FE10BD088919 +:1006A0004B6882B20888194680B206F0A1FE10BDE0 +:1006B00008884B688A6880B2194606F05EFF10BD54 +:1006C000012010BD10B507F09BF80FF0CFF907F02F +:1006D00049FD0FF01DFB07F0B3FD07F0D1FC10BD85 +:1006E0001CB50446002069460870204608F020FD2D +:1006F0006946204608F0DEFB002803D1FBA1B120AB +:1007000012F0DFF901A9204608F033FB002803D1DD +:10071000F6A1B62012F0D5F9684600781CBD70B578 +:10072000F74D002428462C7620308471C47112F0D5 +:10073000DBFA284640380470203084738474847651 +:100740002C74AC7070BDEAE710B50C46ED49828898 +:100750008A8042884A800078087008460A38847087 +:1007600008F0DDFAFFF7DBFF204609F01FFDE44A41 +:10077000E0321146383908461446813808F04AFDFF +:100780002146E0480AF0FDFF08F0C9FC12F0ACFA7F +:1007900010BD10B50120FFF721FE10BDF8B509F01E +:1007A0004CF9D84DD64C0A3D022802D0207C0028B6 +:1007B0007CD0207E0026102819D1A078002803D0F4 +:1007C000CAA1D14812F07DF9CD48E838817A89076D +:1007D0000DD50146267160398989E180C17A21727F +:1007E00081896181C089A0810120A0702676C44FD3 +:1007F000203FB87C002859D1C4486946808908F058 +:1008000059FB002805D06946687809784018687057 +:1008100004E0C520B5A1C00012F053F9207C0028E7 +:1008200038D0BA488189FF300930406D80898142D3 +:1008300004D0B548ADA1223012F043F9B348808905 +:1008400008F0DEFB002804D1AF48A8A1283012F040 +:1008500038F908F04CFC00281CD0AC488089FFF720 +:100860003FFF697840186870A5484038416D2031D5 +:100870000A7C012A0DD1A54A3E779289C287487C1D +:1008800020700120B876207E102801D0282800D1C1 +:10089000267626746978002908D09C488289FF3022 +:1008A0000930C28601870120B8746E7009F0BAF869 +:1008B000002805D1207C002802D0A87801F0A2FEF3 +:1008C000F8BDF8B50F460446FFF768FF8C4D403D74 +:1008D00028788B4E002813D0002F10D1307E0028AE +:1008E00004D0FF2081A1BE3012F0EBF82C22A91C0D +:1008F000204611F049FF0E202070002028708FE064 +:100900007F4D203DA87B002818D0002FF7D1307EE6 +:10091000102808D0282806D0002804D0FF2073A172 +:10092000CA3012F0CEF80120E070E87BA070287C7D +:1009300060700F2020700020A87371E00121204614 +:1009400008F00EFC002807D0307C002851D1394631 +:10095000204608F005FCF8BDA97C69480C380090D9 +:1009600068480A38002913D00178052910D2002FD1 +:1009700056D1491C0170002666700D2020700120A0 +:1009800028750622A01C009911F0FEFEAE7447E007 +:100990005C4800210A380170B078002814D0002F7C +:1009A0003ED1307E002803D050A1594812F089F87A +:1009B000002565700120524920700A22091DA01CE3 +:1009C00011F0E2FEB5702BE0394620460AF046FEF3 +:1009D000002825D1A87C002805D0002F20D1494827 +:1009E0000A380178C5E7A87E002802D0307C0028AC +:1009F00001D00020F8BD002F12D1307E002804D095 +:100A00008D203AA1800012F05CF8002666700A2062 +:100A10003B4920700622091FA01C11F0B5FEAE76DE +:100A20000120F8BD10B53648017E002908D1007CB0 +:100A3000012805D001210020FFF743FF002801D045 +:100A4000072010BD012010BD10B5012409F0F8FBEE +:100A50000443FFF7E7FF044308F062FB014621432C +:100A6000084610BDF8B51D4614460E4608F0A1F91B +:100A7000002807D0684608F0A7F9002803D0002C0A +:100A800007D101E00120F8BD992018A1800012F0E3 +:100A900018F808F045F9A04204D21D4813A15830B7 +:100AA00012F00FF8009807F0B9FD3146009807F0F2 +:100AB000C7FDE2B22946009807F07EFF08F096F9DC +:100AC000002804D19D2009A1800011F0FAFF08F050 +:100AD00029FB0E4800244030C17B002902D0C4739A +:100AE00009F080FC0948C480CCE700007372635CA5 +:100AF0006C6C5F6374726C2E73302E6300000000A8 +:100B0000E0020020240000200B06000098010020D5 +:100B10000D02000010B50179002907D001290AD083 +:100B2000F749FE2011F0CDFF002010BD831D428843 +:100B30000488022103E042880488831D01212046A5 +:100B4000FFF790FF10BDF8B51F4615460E46044648 +:100B500008F073FF022803D0EA48007C00281FD069 +:100B6000E9488089208008F04BFA002803D1E44945 +:100B7000E64811F0A6FF0524684608F04CFA002864 +:100B80000ED0009807F094FD3070022809D001289B +:100B900007D008F080FA641E2406240EECD1002051 +:100BA000F8BD3946009807F01FFF2880002804D1BF +:100BB000D648D349123011F084FF08F06CFA0028AF +:100BC00004D1AF20CE49800011F07BFF0120F8BD99 +:100BD00038B50446831D821C6946FFF7B4FF002820 +:100BE0000DD00020607168460078012808D00228E6 +:100BF00006D0FF20C249203011F063FF012038BD2C +:100C00002071FBE700215CE670B5BE4C0546403C18 +:100C10002078002803D1BB48007E002803D0B849C3 +:100C2000BB4811F04EFF287808F093FB28780AF0B3 +:100C3000EEFE00202071012060713921E1702070EA +:100C400070BD70B5AF4D0446403D2878002803D1F3 +:100C5000AC48007E002804D0AD48A949183811F0EE +:100C600030FFA94E2188B089884203D108F0E5FE03 +:100C7000022807D002202871012068713821E9700C +:100C8000287070BD7F2070769F48E1782030C17356 +:100C9000A17881730020EEE710B59A4C403C207893 +:100CA000002807D19748007E002803D108F0C5FE30 +:100CB000032804D161209249C00011F002FF91493C +:100CC00000202031C8712071012060713A21E1704B +:100CD000207010BD70B58B4C0646403C2078002833 +:100CE00007D18848007E002803D108F0A6FE03281B +:100CF00004D186488249783011F0E3FE814D2035D9 +:100D0000E87908280CD2E87910220001001968302F +:100D1000314600F09FFDE879401CE871002000E0BA +:100D200007202071012060713B21E170207070BDAF +:100D3000F8B5744C0546403C2078002803D1714832 +:100D4000007E002804D072486D49443811F0B9FE85 +:100D5000A878002801D0012804D1A888FF21F53106 +:100D6000884204D96A4866493E3811F0AAFE664EA8 +:100D70002988B089884203D108F05FFE022807D095 +:100D800002202071012060713621E1702070F8BDD1 +:100D90005D48002720308772A988B185012131760E +:100DA000A978012900D00021817257484030C07BCA +:100DB000002801D009F016FB2771E3E770B5514C0C +:100DC0000546403C2078002807D14E48007E002888 +:100DD00003D108F032FE002804D04D484849673856 +:100DE00011F06FFE287809F02EFA00202071012002 +:100DF00060713021E170207070BD70B5414C0546C6 +:100E0000403C2078002803D13E48007E002804D0D2 +:100E10003F483B490D3011F054FE287800280BD094 +:100E2000012809D0022807D06878402804D3384820 +:100E30003349143011F045FE284608F0F6FD00282D +:100E400001D0002000E00C202071012060713421CD +:100E5000E170207070BD70B52A4C0546403C20788A +:100E6000002807D12748007E002803D108F0E5FDBF +:100E7000002804D0264822495C3811F022FE297847 +:100E8000002914D00A2912D0142910D01E290ED0FE +:100E900028290CD032290AD04B2908D0642906D041 +:100EA000FF2904D01A481649503811F00AFE284686 +:100EB00009F028FA00202071012060713321E170CF +:100EC000207070BD70B50F4C0546403C207800285E +:100ED00003D10C4A107E002804D00D48084975380B +:100EE00011F0EFFD062229460A4811F04DFC0020C2 +:100EF0002071012060713221E170207070BD00000E +:100F0000EC0A0000E002002098010020A30200008B +:100F1000910500001D00002070B5F84C05462078B2 +:100F2000002804D120464030007E002803D0F44938 +:100F3000F44811F0C6FD00216956042914D0002997 +:100F400012D0081D10D0001D0ED0001D0CD0001DA9 +:100F50000AD0001D08D00A3006D0283104D0A120C4 +:100F6000E749C00011F0ADFDE74829780170012084 +:100F700060713121E1702070C0E710B5DF4C20783E +:100F8000002804D120464030007E002804D067208D +:100F9000DB49000111F095FD07F0C2FEE08007F08B +:100FA00087FF207200202071012060710521E1700F +:100FB000207010BDF8B5D14C07462034A07B2546E3 +:100FC0002035002805D1287E002802D1A8780028E5 +:100FD00004D0CC48CA492A3811F073FD08F02DFD21 +:100FE0001026022822D1C9483988808988421DD11B +:100FF000C249483908460A7F6038807A002A03D0FF +:1010000080070CD40C200CE0800708D40620087759 +:10101000BE484030C07B002801D009F0E3F92E76AD +:101020000020E07326740120A073F8BD0220F8E7C9 +:1010300010B5B24C2078002804D120464030007E04 +:10104000002804D0AF48AE493C3811F03AFD0020EA +:1010500020710E20A0700F20E070FF20A0710020F2 +:10106000C0432081AA480178A1728188A18140886B +:10107000E08101206071207010BD10B59F4C207878 +:10108000002804D120464030007E002804D0DB2018 +:101090009B49800011F015FD0821A01D0EF082FD76 +:1010A00000202071012060712B21E170207010BDA3 +:1010B00070B5924D04462878002804D12846403067 +:1010C000007E002804D0B7208D49C00011F0F9FC43 +:1010D0008E4810222146303800F0BCFB8B4810228D +:1010E000A118203800F0B6FB884830380EF061FEB9 +:1010F0008649102210392C46A81D00F0ABFB0020B9 +:1011000020710E20A0702A20E070012060712070F4 +:10111000F4E6F8B5794C05462034A07B2646203607 +:10112000002802D1307E002804D076487449DC388B +:1011300011F0C7FCA978052912D0132910D0142961 +:101140000ED015290CD01A290AD0292908D03D29FA +:1011500006D03B2904D06B486949D43811F0B1FC62 +:1011600028886C49884204D966486549CB3811F013 +:10117000A8FC08F062FC0C212827022809D163484A +:101180002A888089904215D15C484838027E002A1E +:1011900001D0E17310E0A97841760121017637761C +:1011A0000020E07359484030C07B002804D009F08B +:1011B00019F901E00220E07327740120A073F8BD43 +:1011C00070B54E4C05462078002804D122464032A6 +:1011D000107E002804D083204949C00011F071FC22 +:1011E0004648294660300622054611F0CDFA012016 +:1011F000A8710021217160711721E17020707DE6D6 +:10120000F0B5414F85B0403F3D7A06463B480078F7 +:10121000002804D13846A038007E002803D0384981 +:101220003D4811F04EFC3078002806D0012804D04B +:101230000D203349800111F044FC082D39D2324889 +:1012400020380190C469307800282CD0012804D0BF +:1012500031482B490F3011F034FC29460831012068 +:10126000884004430120A84020430090B179234CDA +:1012700008027279690009191043FF310131888130 +:10128000B01C11F0E2FA717800020843A9000919B4 +:10129000C031C862387A401C387201990098C86120 +:1012A0000020207108E0294608310120884084434D +:1012B000D8E7124807210171012110480B22417122 +:1012C000C270017005B0F0BD10B50C4C207800283C +:1012D00004D120464030007E002804D00E48084942 +:1012E0000E3811F0EEFB11F0FFFC00202071012000 +:1012F00060710A21E170207010BD0000A002002082 +:10130000EC0A000006050000C00300209801002040 +:1013100024000020FF0E00003F03000010B508F07D +:101320000AFF002803D0FC49FC4811F0CAFB07F073 +:10133000F5FE07F0D8FC0AF016FA002804D0F748AA +:10134000F5490E3011F0BDFB07F039FF002804D03D +:10135000F248F149123011F0B4FB11F0C5FCF0482D +:1013600000240470FFF7DBF9EE480121047141719C +:101370000222C2700170BFE770B5EA4D04462878BA +:10138000002804D128464030007E002804D0EF20F9 +:10139000E149800011F095FB20781F2801D8601CDE +:1013A00004D1DE48DC49DE3011F08BFB00202871CF +:1013B0002078611C07F0BCFF012068712021E970D2 +:1013C00028709BE5F8B5D74C054620782646403670 +:1013D00000280CD1307E002809D108F02EFB00280F +:1013E00002D1307C002807D0287800280ED0CB48C6 +:1013F000C949EB3011F065FB2878012806D0002898 +:1014000004D0C648C449F03011F05BFB0120607184 +:1014100028780027C44D01280BD0002008F074FE66 +:10142000002844D00C2020711B20E0700120207087 +:10143000F8BD0C20207107F003FF0028F4D0BA4853 +:1014400002210C300EF037FB002806D00F21A889AE +:10145000090211F013FAA98100E0AF8101220321F2 +:10146000B14807F0E9FAB04808F051F8A88907F048 +:1014700059FC002803D1A849AC4811F022FBA889E7 +:10148000002107F053FE002804D0A848A249001DFF +:1014900011F017FB317F708B08F0D9FE002804D0C3 +:1014A000A2489D49083011F00CFB2771BCE7277159 +:1014B000307C0028B8D1A889FFF712F9B4E770B5DD +:1014C000984D04462878002804D128464030007EF4 +:1014D000002804D0954890493B3811F0F2FA207862 +:1014E0001F2801D8601C04D190488B493A3811F06C +:1014F000E8FA002028712078611C07F02DFF0120F8 +:1015000068711A21E9702870F8E4F8B5854D044631 +:1015100028780C272E464036002806D1307E002839 +:1015200003D108F08AFA032804D16F207A49C00059 +:1015300011F0C7FA6079002801D001282FD1A079D5 +:10154000002801D001282AD1A07B002805D001283D +:1015500003D0022801D0032821D1607B40071ED090 +:10156000618801208003814202D82288824201D909 +:1015700020790CE02079002804D0022805D0032827 +:1015800003D004E0202904D209E0A02A01D20128D6 +:1015900005D12088884207D92079012804D06348E2 +:1015A0005D495F3811F08DFA20887083207930779B +:1015B0006079002802D0012803D00CE05C4A0021A9 +:1015C00005E0584A60329079002804D00121204675 +:1015D00007F03AFE074601202F7168711821E97063 +:1015E0002870F8BD70B54F4C05462078002804D10E +:1015F00020464030007E002804D04C484649B63092 +:1016000011F05FFA08F019FA0C2102280ED14648B1 +:101610002A8883899A4219D10246C032137F002B4F +:1016200004D1807E0E2803D00F2801D0217103E061 +:1016300005201077002020710E20A0702E20E07071 +:101640002888E08001206071207057E40220F2E7D2 +:1016500070B5344C05462078002804D1204640302F +:10166000007E002804D031482B498A3011F029FA35 +:1016700008F0E3F90C2102280ED12B482A8883892F +:101680009A421FD10646C036327F002A04D1807E9E +:101690000E2803D00F2801D0217109E02148102223 +:1016A000A91C1E3811F070F804203077002020713A +:1016B0000E20A0702D20E0702888E080012060714D +:1016C00020701BE40220F2E710B501780B0011F046 +:1016D000FDFA3C90904590906590909090484B908A +:1016E00090905E619090909090904F3590393D90A1 +:1016F00090909041909090909090905390575B90E4 +:101700001F319078686C7074907C90878B84809087 +:10171000801CFFF79DFF6AE0EC0A0000DF0200007A +:10172000C0030020A002002098010020E90300006F +:101730001D000020801CFFF755FF58E0801CFFF7BC +:10174000E4FE54E0801CFFF7BAFE50E0801CFFF777 +:1017500039FE4CE0801CFFF70FFE48E0FFF7DEFD8E +:1017600045E0FFF7B1FD42E0801CFFF749FD3EE098 +:10177000801CFFF725FD3AE0801CFFF7CAFC36E02D +:10178000801CFFF795FC32E0FFF777FC2FE0FFF7B6 +:101790004FFC2CE0801CFFF70DFC28E0FFF7EDFB71 +:1017A00025E0801CFFF7B8FB21E0801CFFF78AFBD7 +:1017B0001DE0801CFFF74FFB19E0801CFFF71DFBAD +:1017C00015E0801CFFF7FAFA11E0801CFFF7B0FA71 +:1017D0000DE0801CFFF77EFA09E0FFF75DFA06E0F6 +:1017E000801CFFF72EFA02E0801CFFF70DFA0120A3 +:1017F00082E5002080E510B51D491E4811F061F911 +:101800007AE570B51D4A012411461B4D4031030095 +:1018100011F05CFA05191C1C04191C00012200219E +:10182000154807F009F91548002148380177417734 +:10183000C03808F068FD002804D00E480C49D330A9 +:1018400011F03FF964E40C74556561E46D200849BA +:101850000001F5E730B5134606E0CC18203CE47FE4 +:10186000D51A44555B1EDBB2002BF6D130BD00000B +:10187000EC0A0000CA05000098010020A002002028 +:1018800010B5030011F022FA070805080B0B0E0E25 +:10189000110003F0FAFF10BD01F0BAFF10BD0BF00C +:1018A0009BFF10BD0DF004FE10BDFF20F8A17D30A0 +:1018B00011F007F910BD7FB5F94AFA4C51689268EA +:1018C0000192009120700823F74A1946F7480EF05C +:1018D00093FB0025F6480EF0ADFB6D1CEDB2072D15 +:1018E000F8D3F1490320803140020BF0C7FF0028F4 +:1018F00003D0E7A1912011F0E4F81E220221ED4867 +:101900000AF077FBEB481E22032110300BF0EBF8B6 +:10191000E8480722342174300AF0C4FAE5484C2123 +:10192000283010F090FFE3496A46743108464C387D +:101930004164FF317B31816401211172039002F017 +:1019400016F902A80CF0CCFA002803D0D0A1A520EB +:1019500011F0B7F8D54802222421A8380AF0A2FADB +:10196000D24802222C215C380AF09CFAD2490B2082 +:101970000DF08AFE002803D0C5A1B22011F0A1F815 +:1019800003F070FF03F076F904F0D6FD6B46CB4A06 +:101990000821CBA002F04BF8002803D0BCA1B9204D +:1019A00011F08FF8012005F0C8F8002803D0B8A185 +:1019B000BB2011F086F87921C900C44810F043FF1C +:1019C000C249B74A0020135C0D18401CC0B2EB702E +:1019D0000428F8D3002060606070A0707FBD70B5EF +:1019E000BB4E0546706A94B00C46401C04D1B06AE8 +:1019F000C0430004000C0BD0306AC007C00F287031 +:101A0000706A10F033FFB06A2071000A607113E051 +:101A10002B206946087009A968460AF089FA00284F +:101A200003D09BA1DF2011F04CF801202870062282 +:101A30000AA9204610F0A8FE2878002815D0607961 +:101A4000C0210843607117206946087000A806226B +:101A50002146023010F098FE09A968460AF068FA9B +:101A6000002816D08AA1F42011E0322069460870BF +:101A700000A806222146023010F086FE09A9684619 +:101A80000AF056FA002804D0FF2081A1013011F09D +:101A900018F814B070BDF0B58D4C0646206895B0AE +:101AA0000D463746401C0837002808D16068401CA6 +:101AB00005D1A068401C02D1E068401C11D020680C +:101AC000314610F0D3FE6068311D10F0CFFEA068E3 +:101AD000394610F0CBFEE06831460C3110F0C6FEFE +:101AE00025E02B206946087009A968460AF020FA0B +:101AF000002804D0FF2066A1203010F0E2FF082269 +:101B00000AA9304610F040FE2B206946087009A94A +:101B100068460AF00DFA002804D0FF205CA12730A7 +:101B200010F0CFFF08220AA9384610F02DFE2069D8 +:101B30002E46401C0836002808D16069401C05D19B +:101B4000A069401C02D1E069401C12D020692946DE +:101B500010F08CFE6069291D10F088FEA0693146E6 +:101B600010F084FEE06929460C3110F07FFE15B0BC +:101B7000F0BD2B246846047009A90AF0D9F90028A1 +:101B800004D0FF2042A1453010F09BFF082209AF8E +:101B90000AA9284610F0F8FD6846047009A90AF061 +:101BA000C7F9002804D0FF2039A14C3010F089FF7C +:101BB0000822391D304610F0E7FDD8E710B50021A6 +:101BC00008460EF0ECFA002101200EF0E8FA0021A0 +:101BD00002200EF0E4FA002103200EF0E0FA0021CA +:101BE00004200EF0DCFA002105200EF0D8FA10BD1A +:101BF00010B5364CA0780A2804D3FF2024A19630D3 +:101C000010F05FFF20786021484300190830002160 +:101C100001704178E722C908C900C91C1140417010 +:101C2000204A0121517010BD70B51E4C607800280B +:101C30000ED0264800250178491CC9B201700A2936 +:101C400000D105708178491C81700EF072FB6570BF +:101C500070BD70B5134C05466068002804D0FF20A5 +:101C60000BA1BF3010F02DFF656070BD70B50D4E3B +:101C7000164DFFF7BDFF7168044600292AD0602287 +:101C8000FEF7A2FAFFF7D0FF00207060F1E7000036 +:101C90007372635C686F73745F636F72652E630049 +:101CA000F82C01002C000020C40300206C1100203F +:101CB00081180000440A0020141000203412000093 +:101CC0006E52463531383232000000004C0C002094 +:101CD000800000102879002852D0FE480AF0F2F85F +:101CE0006060002804D1FF20FB49DD3010F0E9FEE0 +:101CF00060680AF045F9002810D0204601F0A5F8E8 +:101D00006078010707D5C008C000401C60702879C2 +:101D1000401E287126E0EF48616829E0ED486168BF +:101D20000AF0D9F8687900282AD0EA484C380AF035 +:101D3000C9F86060002803D1E749E84810F0C1FE07 +:101D400060680AF021F9002815D0204603F0DCFD78 +:101D50006078010709D5C008C000801C60706879F0 +:101D6000401E6871FFF760FF83E7DA4861684C380E +:101D70000AF0B1F87DE7D74861684C380AF0ABF853 +:101D800070BDF7B505460078002700090C463E46B1 +:101D9000062804D0D148D049223010F092FE287A8B +:101DA00000280ED0012814D0CC48CB49433010F085 +:101DB00088FE0298002C068001D0278066800020D3 +:101DC000FEBD02270926002C0ED0A889A080A87B82 +:101DD00008E003271426002C06D02869E060A88AB2 +:101DE0002082287B2072E4E702980680E7E770B53E +:101DF0000E4600211C4619801546030010F066FFB0 +:101E00000723050B1711231D2300224629463046C0 +:101E100003F046FD70BD22462946304601F09BFA8C +:101E200070BD22462946304604F081FA70BD224634 +:101E30002946304602F052FF70BD22462946304600 +:101E4000FFF79FFF70BD4D20A349C00010F039FE81 +:101E5000032070BD01469F4810B54C380AF03BF88E +:101E60009F494879401CC0B24871012803D19D4860 +:101E7000007800F0C7FB10BDF8B505460720400705 +:101E80000F460A18012189038A4209D2002D02D087 +:101E90002818884204D2E81C80088000A84201D09B +:101EA0001020F8BD8E488178002911D03988009122 +:101EB0004178602251430C18083420783B460007D3 +:101EC000000F00222146FFF792FF060004D015E024 +:101ED000002038800520F8BD002D13D039880098E7 +:101EE000814201D90C260DE020783B460007000F07 +:101EF0002A462146FFF77BFF060005D00C2E01D0B5 +:101F0000002038803046F8BD754D6878401CC0B25E +:101F100068700A2801D100206870A878401EA87057 +:101F200061784807400F022810D00128EAD169489B +:101F3000616809F0D0FF2879401CC0B228710128DF +:101F4000E0D16848007800F05DFBDBE7C806D9D433 +:101F50006068FFF77FFFD5E770B504466248164614 +:101F60000D46814204D15D485B49DB3010F0A9FD8C +:101F7000012E05D059485849EB3010F0A2FD70BD34 +:101F80005848012181706620207000202072A581B0 +:101F9000A17370BD70B516460D46040001D1FFF760 +:101FA00027FE662101700121017229680161A9885B +:101FB00081820673002C01D1FFF736FE70BD072128 +:101FC0004907012241189203914201D31020704722 +:101FD0000721017000207047052210B5920390423E +:101FE0000ED301239B04C21A404B9A4208D3404BA4 +:101FF000984205D2072252078A18DB139A4201D36E +:10200000102010BD0DF079FB10BD052310B59B030A +:1020100099420ED301239B04344CCB1AA34208D31C +:10202000334B994205D2E3020124D318A403A342FF +:1020300001D3102010BD022803D0102801D00920A0 +:1020400010BD0DF080FB0028FAD0052010BD70B542 +:1020500005239B03984212D301239B04234CC31AEC +:10206000A3420CD3224B984209D2E4020D19DB1390 +:102070009D4204D2002A04D014199C4201D310209E +:1020800070BD0DF086FB0028FAD0072070BD10B59A +:1020900004460720400701212018890394B0884294 +:1020A00002D3102014B010BD01F0ADFD002801D006 +:1020B0001120F7E70F2008A9087369460BA809F05B +:1020C00037FF0028EED16846007A207068464089C4 +:1020D00060800FE010110020901C0000FF01000044 +:1020E0004C0C00202C000020FFFF00000000FC1F13 +:1020F0000040002068468089A0800020D2E710B50B +:1021000094B0044601F07FFD002801D01120C9E7FA +:10211000002C01D00720C5E7392168460170002155 +:10212000817009A909F004FF002803D01549164859 +:1021300010F0C7FC0020B5E770B5144C0846A17834 +:10214000002913D000280FD0072252070123851839 +:102150009B039D4203D20568AA189A4201D310201E +:1021600070BD8288002A03D0012903D0082070BDE9 +:10217000092070BD04F042FA0028FAD10021A170B4 +:1021800070BD0000901C0000790300002C000020AE +:1021900010B56038030010F099FD07050A0E131AF8 +:1021A00021252C0005C91146FFF766FE10BD086801 +:1021B000FFF705FF10BD05C91146FFF70DFF10BD64 +:1021C0004B6808788A681946FFF71FFF10BD4B68F7 +:1021D0008A6808681946FFF73AFF10BD0868FFF7DC +:1021E00056FF10BD08884A6880B21146FFF7A4FF69 +:1021F00010BD012010BD10B56C2801D0012010BD0C +:102200000878FFF77CFF10BD10B5EFF31080C4070E +:10221000E40F72B6D6484178491C417040780128D5 +:1022200001D10EF0ABF8002C00D162B610BD70B534 +:10223000CF4CE07800280AD10125E570FFF7E4FFD4 +:102240000EF0A4F8002804D000200EF077F800204B +:1022500070BDC84865714560F9E770B5EFF310804F +:10226000C507ED0F72B6C24C6078002803D1C2A139 +:102270008F2010F026FC6078401E60706078002887 +:1022800001D10EF07FF8002D00D162B670BD10B5FF +:10229000B748C178002904D000214171C170FFF70F +:1022A000DCFF002010BD10B504460EF06FF8B049F9 +:1022B000C978084000D001202060002010BDF8B58A +:1022C0000246AB4C0026A6710820042101251027E8 +:1022D000130010F0FBFC0D080A0C0E101214161E51 +:1022E000262123252800257122E0022001E021710A +:1022F0001EE020711CE027711AE02020F9E701267A +:1023000016E0FFF781FF0EF041F80028FBD002260F +:102310000EE02171A5710BE02771FBE7202000E0A2 +:1023200040202071F6E7FF2093A17E3010F0C9FB1A +:102330000EF038F8002809D00EF03AF8B04205D176 +:1023400030460EF038F80028FAD024E0012080074B +:10235000C5608D4A002151608C4A9661854B0222EE +:102360005A6085608A4803690569DB43DB06DB1731 +:102370005B1C10273D430561834D00E020BF6F6863 +:10238000002FFBD0002B03D1076910239F43076167 +:10239000784882606960A07900280CD00DF0F6FFC3 +:1023A00005460DF053FF7B4A002D02D0A260E0608D +:1023B00001E0E260A060002E01D100F0B1F8F8BDAC +:1023C00010B504460DF0E8FF002805D0684901204B +:1023D000C8704A78521C4A702046FFF770FF10BD43 +:1023E000F8B5694FB8680025012802D1BD600DF02D +:1023F000A5FF7868012800D17D60386801265C4C13 +:10240000012814D13D606079002803D000200DF030 +:1024100095FF65712078002809D00DF0B7FF0028DE +:1024200005D05948C038866300060661A670386931 +:1024300001282CD13D6100F068F801208007466139 +:10244000A079002815D00DF0A1FF00900DF0FEFE40 +:102450000099002901D0E16800E0A168411A022931 +:1024600001DA8A1C13DC0099002901D0E06000E049 +:10247000A060FFF7C9FE0DF089FF002806D0424892 +:10248000C038866300060661A67000E02670F86812 +:10249000012819D100F039F800F037F800F035F8CC +:1024A000A078002804D1FF2033A1053010F009FBEB +:1024B000FD60A5702570FFF7D0FE0DF042FA0028F0 +:1024C00002D03148C038C663F8BD10B5284CE0785A +:1024D000002801D10DF056FF01208107886100F02E +:1024E00014F8A07800280BD0274CE068002803D10E +:1024F0000DF061FF0028F8D10020E06000F005F841 +:1025000000201C49C043886010BD08B550206946B2 +:1025100008806A461088411E11800028F9D108BD44 +:10252000F8B5144819278760174900200860C8606B +:102530000DF02CFFBD0701240D4E002805D01248D8 +:10254000C03884632C61B47000E03470FFF75CFE27 +:10255000084847600D4930798863FFF7D6FFAC61C2 +:10256000FFF7D3FF0849002008616C61F8BD000047 +:1025700034000020000300407372635C736F635F7C +:10258000636C6F636B2E6300000100400005004028 +:1025900000ED00E0FFFFFF7F01203F49400608609B +:1025A0003E4908603E490A68FF231B029A43831292 +:1025B0001A430A60384980390860704710B50246EE +:1025C0000420384904E0C3005B181B79002B0AD0B3 +:1025D0000346401EC0B2002BF5D133A1432010F0BA +:1025E00070FAFF2010BDC300CA50002259184A716A +:1025F0008A7101220A7110BD2A4A0021C000801888 +:102600000171704710B50446042803D326A1522057 +:1026100010F057FA2348E1000C182079012803D064 +:1026200021A1532010F04DFA6079A179401CC0B26D +:10263000814200D060710120174940068031086056 +:1026400010BD70B5164800680004800F022803D042 +:1026500015A1692010F035FA124E194C0325207887 +:10266000C10088190279012A07D1427983799A42F7 +:1026700003D042798271705880472078401CC0B2E4 +:102680002070042801D30020207028466D1EEDB272 +:102690000028E4D170BD000080E100E080E200E0AD +:1026A00018E400E08C1100207372635C736F635F49 +:1026B0007369676E616C6C696E672E630000000061 +:1026C000440000208107C90E002808DA0007000F27 +:1026D000083880082C4A80008018C06904E080080F +:1026E0002A4A800080180068C8400006800F7047A2 +:1026F00010B50D20FFF7E6FFC4B20420C043FFF77A +:10270000E1FFC0B2844203D021A11A2010F0D9F910 +:1027100010BD0121234A48031060234B00221A6098 +:10272000224A5160224A1060224A11601D498039B4 +:102730000860704701211B4A480310601D4A516020 +:10274000194A002111601A490860704710B51649EE +:102750000868012804D00EA1562010F0B2F910BD6F +:10276000154880680022C0B20A600DF041FA10BD21 +:1027700010B50D4801680029FCD0FFF7E7FF0120E4 +:102780000B494003086010BD00ED00E000E400E0EC +:102790007372635C736F635F68616C5F726E672EE8 +:1027A0006300000080E100E000D1004000D3004061 +:1027B00080E200E000D0004000D5004030B40121AC +:1027C000BB48C9020160CD1005604A030260B948E8 +:1027D00003681B021B0A036004680023240A240206 +:1027E0000460B5480468240A24020460B348012444 +:1027F00044608460B24C23606360A360B14B196095 +:102800001D601A60B04B19601A600121016030BC74 +:10281000704710B40121A648CC0204600A0202608D +:102820000B060360A54841608160A549002008604F +:1028300048608860A34804600260036010BC704771 +:102840000121A048C9020160C91001607047002839 +:1028500005D0012805D0022805D19C4870479C4826 +:1028600070479C48704710B59BA18B2010F029F948 +:10287000002010BD70B500219E4C9F4D9F4A904B8B +:10288000002808D001281DD0022822D092A1B32010 +:1028900010F017F970BD01200004A060A86011605D +:1028A0001960974B42109A60964A9060804A0012D5 +:1028B0001060954801608648016094480160944822 +:1028C000017070BD01204004A060A8605160596093 +:1028D00070BD01208004A060A8609160996070BD07 +:1028E000F8B59446834A844D00240127744E00288D +:1028F00008D0012836D0022844D077A1E82010F073 +:10290000E0F8F8BD891E0902090A01200004906060 +:1029100034606860794A1160012B21D000217C4A23 +:102920007C4B517061463D31DC63DF637A4B5C6008 +:1029300002249C6004241C61734B196073490F606E +:10294000604B891519606F4B58605F48016074488F +:102950007249C16086606A49600348601770F8BDBB +:102960000121DCE701205B4E40046E4F012B04D1B6 +:102970003460506068603960F8BD906034606860B1 +:102980003960F8BD0120514E8004674F012BF4D10E +:10299000EEE766484068704770B5494D28680026E4 +:1029A000544C012806D1A068C00303D501200004BF +:1029B000A0602E606868012809D1A068800306D550 +:1029C00001204004A0606E6001200EF05BFAA86850 +:1029D000012809D1A068400306D501208004A06029 +:1029E000AE6002200EF04EFA70BD10B5484908786E +:1029F000002818D00120424AC0039060414A40009C +:102A000090602B4A001210603F4A00201060304A4C +:102A100010603E4A106008704A78002A02D0487060 +:102A20000EF030FA10BD0320FAE7012040490006FD +:102A300008607047012023490006086070470120A4 +:102A40003B4940050860704701201E494005086069 +:102A5000704730490020C8637047410A354AC005B5 +:102A6000C00D5043801C5143400A0818704710B4F1 +:102A7000314C430B63431B0C5C020C602D4C6343D5 +:102A8000C31A2E485C0258432A4B400D4343E31AB5 +:102A90000124DB0324041B191B1613700A68101889 +:102AA000086010BC704710B50EF0B6FA10BD0000FB +:102AB00080E100E008E400E018E400E000B000403D +:102AC00040B1004080E200E000E100E048B1004099 +:102AD0004081004044B100407372635C72656D5F79 +:102AE00068616C5F6576656E745F74696D65722E82 +:102AF0006300000000B3004040B3004040B5004018 +:102B000000F5014000830040408500400082004005 +:102B100045000020C08F004000850040008000403C +:102B200080F5014044B5004048B5004000B5004084 +:102B300000E200E0093D0000378600006F0C010054 +:102B400010B50EF055FA10BD012001218140064A52 +:102B5000116000BF00200549C8630120C8637047A9 +:102B600000200249C863704780E100E0C01F0040B8 +:102B700070B5FF4D044629680300A03110F0A6F897 +:102B800008053E08080E1D2C3242FAA1D22033E07F +:102B9000887F012832D0F7A1D8202DE001F058FE1F +:102BA00005282BD001F054FE062827D001F050FE56 +:102BB000072823D0EFA1DB201EE001F049FE032807 +:102BC0001CD001F045FE062818D001F041FE072870 +:102BD00014D0E8A1E0200FE0887F05280ED0E5A101 +:102BE000E52009E001F034FE052807D001F030FEB1 +:102BF000062803D0DFA1E8200FF063FF2868A0308B +:102C0000847770BDDBA1EC20F6E7D949C1220968C1 +:102C1000525CD206920F05D1A0318A8A824201D13C +:102C2000887D70470020704770B5044611202070E1 +:102C30000021CF4D61702968C0318978002908D002 +:102C400003290ED0042910D0FF20CAA116300FF09E +:102C500038FF20780009012802D92868807E60703A +:102C600070BD0007000F203002E00007000F303079 +:102C70002070EEE730B50388C249C34C8B4202D0C6 +:102C80009A1FA2421ED242888A4202D0951FA542B4 +:102C900018D2934216D883887D24E400A34211D829 +:102CA000C088884205D0B84D04460A3C2D1FAC426E +:102CB00008D2884208D08A4206D05B1C5A43C00022 +:102CC000824201DD072030BD002030BDFFB500226B +:102CD000099B002802D0994205DC5CE0002902D162 +:102CE000002004B0F0BD0920FBE7845C002C12D06A +:102CF00085186F780D2F4CD010DC3B000FF0E6FFED +:102D00000A421B2A2A303032323A3A42835C002B84 +:102D10003FD1521CD2B28A42F8DBE1E7122F31D008 +:102D200004DC0E2F35D00F2F2CD132E0142F11D010 +:102D3000152F27D116E0022CD5D1AB78039C072B99 +:102D4000237001D25B0701D40A20CAE7029B012449 +:102D50001B7814E0E343DB0708E0012C08D011E006 +:102D60000620BEE70F2523072D075B19002BF4D0A3 +:102D70003046B6E7029B1B789C070AD40224234303 +:102D8000029C2370835C521C9A18D2B28A4204DDE2 +:102D9000A9E70B20A5E7192676028A42A5DB9FE763 +:102DA00005E00278401C002A01D0002070470A4646 +:102DB000491E89B2002AF4D10120704730B56C4D0C +:102DC0000021286887B0C943A0308182002484751F +:102DD000214606200DF0E3F9002105200DF0DFF972 +:102DE000002102200DF0DBF90120FFF7C1FE286869 +:102DF000BF210C54C0300470012069460870684639 +:102E00000BF08FF807B030BD10B5594A94B0126876 +:102E1000A032927F042A0AD028236A461370508079 +:102E2000132906D03B2904D0072014B010BD082078 +:102E3000FBE71171104609A909F07AF8040002D1E4 +:102E40000420FFF795FE2046EFE7F0B59BB00400A5 +:102E500003D148A14D480FF034FE72202070606805 +:102E6000002701780826491F414D0B000FF02EFF67 +:102E70000F096ECBFB6E70F9F8AA6E6E6E6EF7F6E8 +:102E80006E002868A030807F032804D0972039A1E5 +:102E900080000FF016FE002108460DF080F96078E2 +:102EA00010233043607028680146C0314A781A43C5 +:102EB0004A7061688A783C2A45D08E880146012292 +:102EC000A0318A756268D2890A836268128A4A834D +:102ED0006268528A8A838E8261680622C979C173C8 +:102EE0006168103008310FF04FFC0520FFF740FEFD +:102EF0002868C2210F54017FFB2211400177B021C5 +:102F000009584A7A920892004A72C782304602F003 +:102F1000B5FC002804D01D4816A122300FF0D1FDC9 +:102F2000304601F0C7FE002804D04F2011A1C00098 +:102F30000FF0C7FD304603F00FFB002806D0134802 +:102F40000CA1273023E10120FFF712FE1BB0F0BDDA +:102F5000878801F07DFC052820D001F079FC062847 +:102F60001CD001F075FC072818D001F071FC0FE0AF +:102F7000480000207372635C6761705F636F726505 +:102F80002E630000FFFF00007B0C000053020000D6 +:102F9000042803D0FB49FC480FF093FD60783043D0 +:102FA00060702868C030417831434170FFF706FFF8 +:102FB000384602F068FC384601F082FE384603F0DD +:102FC00001FBC3E701F044FC052810D001F040FCF0 +:102FD00006280CD001F03CFC072808D001F038FC92 +:102FE000042804D0E848E74913300FF06AFD606810 +:102FF000807902F000FD0028A8D06178314361702B +:103000006168C880A2E701F023FC052810D001F018 +:103010001FFC06280CD001F01BFC072808D001F08B +:1030200017FC042804D05520D649C0000FF049FDF4 +:103030006078304360706068C1882868A030018380 +:10304000616809894183616849898183002102207F +:103050000DF0A5F82868A030C77777E70CE167E1A5 +:103060006FE070E0FFE701F0F3FB052810D001F0FE +:10307000EFFB06280CD001F0EBFB072808D001F08D +:10308000E7FB042804D0C048BE4935300FF019FDD5 +:103090002868BE21095C042993D0807D40063CD578 +:1030A000606802210C30FFF77BFE002835D0606895 +:1030B0000821001DFFF774FE00282ED02868014665 +:1030C00080310A6B527A920708D1C222125C002A20 +:1030D00008D1C28AD30505D5D20703D1C38A4022BD +:1030E0009343C382C38A80229343C3822D236A46BB +:1030F0001370A030808A5080CB698A694869096A58 +:1031000001AC0DC4049109A9684608F011FF00281C +:10311000A3D09D489B49573039E062682868A421B4 +:1031200092890A5261680822091DA6300FF02CFB13 +:1031300010A806742868A630159014A80AF0F1FEAD +:1031400004E70121817101F083FB052810D001F013 +:103150007FFB06280CD001F07BFB072808D001F08C +:1031600077FB042804D0884886497B300FF0A9FCFF +:103170002868BE21095C0429E2D061688A79002AA6 +:1031800002D08978002905D07F487E49E1300FF0D0 +:1031900098FCDBE6617831436170B0210958497AC7 +:1031A0008907890F01294DD1817D09064AD4017F04 +:1031B000490701D5042100E00321C03081702B2094 +:1031C0006946087009A9684608F0B2FE002804D0D4 +:1031D0006D486C4997300FF074FC69462868098D7A +:1031E00001830E2210A90A7468491591027A0A70A7 +:1031F000024609324A600F320A61521D8A6010325B +:10320000CA60133A4A618A328A61921CCA61423AA0 +:103210000A6210324A6210328A62403A8A63D21FCE +:10322000CA63521C54300A64486414A80CF004F8B1 +:10323000022815D0002813D053485249BF300FF050 +:1032400040FC0DE0817D4906017F490701D504213D +:1032500000E00321C0308170002106200CF09FFFA8 +:103260002868C18A0A0602D440229143C1828AB2E8 +:1032700080218A43C28269E62868A030807F0328C3 +:1032800004D041483F49ED300FF01BFC00210846B7 +:103290000CF085FF60781023304360702868014689 +:1032A000C0314A781A434A7061688A783C2A00D152 +:1032B00049E68E8801460122A0318A756268D2896A +:1032C0000A836268128A4A836268528A8A838E827B +:1032D00061680622C979C1736168103008310FF046 +:1032E00053FA0520FFF744FC2868C2210F54017FE0 +:1032F000FB2211400177C782304602F0BFFA002856 +:1033000004D0E3201F4980000FF0DBFB304601F0C2 +:10331000D1FC002803D01B491D480FF0D2FB3046DA +:1033200003F01AF90028A6D019481649801C2EE788 +:1033300060783043607009E600290BD0888015481A +:103340000068A030028BCA80028B0A81428B4A81BE +:10335000808B88817047F7B5064600780C460027B9 +:10336000010982B03D4601296FD00A4800680090EB +:10337000C03002296AD0072910D00A2967D0014934 +:103380000548DAE1742F0000860200000C120020CC +:103390008F030000480000201105000071680A78C2 +:1033A000521F13000FF092FC0F09B054B0B02F5B06 +:1033B0005B47B0B0B0B0656FB0008A783C2A1BD0D4 +:1033C00010271625002C7DD08888A0807068A21D4B +:1033D000C08920827068C089E0817068008A60823C +:1033E0007068408AA082716808460831C07901F08F +:1033F00034FA0020607375E019270725002CE2D00D +:103400000021A17171E011270725002CDBD08988EC +:103410000091A1807168F7228979A17141781140EA +:103420004170009802F030FA009801F04DFC0098CD +:1034300003F0D6F8ACE101270925002CC3D0888819 +:10344000A080706880792072A2E160E09DE178E060 +:10345000888812270E252146FFF76EFF98E118276E +:103460000825002CAFD08888A080A01DFFF7DCFBCA +:103470008EE11A270725002CA5D04888A080706807 +:103480000079A07184E18A783C2A32D01027162571 +:10349000002C98D08888A0807068C08920827068CD +:1034A000C089E0817068008A60827068408AA0826A +:1034B0007168607B497D40084000C907C90F084317 +:1034C000607300E036E17168C007497DC00F4908AC +:1034D0004900084360737168A21D08460831C0792D +:1034E00001F0BBF9FB480068C0304178EF22114081 +:1034F00031E119270725002C88D00021A1714278DD +:10350000EF210A40427043E1F349F44815E1307A73 +:10351000012803D0F148F04917300EE112270E259B +:1035200070892146FFF708FF002C87D0707840078C +:10353000400F032888D1E7480068C0304178FB225B +:10354000D5E7E4490968A031002C01D08A8AA2801D +:10355000327A921E13000FF0B9FB073B4651EEDBA7 +:103560006B05EE0013270C25002C85D0F1688978B7 +:103570008907890F0129217A27D04908490021723A +:10358000FD221140F268E32392785207D20F5200D5 +:10359000114321720022E2801940F3681B785B0717 +:1035A000DB0E19432172DF231940F3685B78DB07D8 +:1035B0009B0E194321726272F1680122C978A172CF +:1035C00001781143F722114016E001221143D6E79A +:1035D00015270C25002C8FD0F06806220068A11D4D +:1035E0000EF032F8D4E016270725002C84D0317B6A +:1035F000A1710178082219E00170C9E01427122591 +:10360000002C92D000980099C07BA21D103101F0CF +:1036100024F9B089E081207C01210843F921084088 +:103620002074AC480068C030017802221143E3E7FF +:1036300017273825002C7DD03221A01D0FF001F96D +:103640000020A071207A03210843A24A2072116849 +:10365000FB260B7F30405B07DB0F9B00184320727B +:10366000B0204058407A800751D0A07A8A7D400827 +:10367000D2074000D20F1043FD221040A0728B7D74 +:1036800030409B07DB0F9B00184308231843EF23B0 +:103690001840A0728A7DE07AD206D20F30409200A4 +:1036A0001043E072F72210408A7DD206D20FD2007A +:1036B0001043E072088BA0812046102264310E3046 +:1036C0000FF062F88349A07F0968C0078A7EC00FA7 +:1036D00052001043A0770A7F400852074000D20FE3 +:1036E0001043A077084644304DC820344DC4303CC8 +:1036F0003D20405C224630323E3101F0AEF8754844 +:1037000000688030006B417A8908890041723FE08F +:10371000327B022A14D017273825002C2ED0012AFC +:103720001BD0032A1BD0042A1CD0052A1AD06A49B0 +:103730006A4801E022E024E0B1300FF0C2F927E04E +:1037400019270725002C19D0898AA1800121A17190 +:1037500041784908490041701AE0012000E0022048 +:10376000A07106E0707B0007000F8030A071052A71 +:1037700002D00020E0710BE00120FBE704980580F7 +:103780000CE09F205449C000D7E7317A002908D0C7 +:103790000498002C058001D027806580002005B0AA +:1037A000F0BD19270725002CE8D00021C943A180CE +:1037B0000021A1714178FD2299E600B595B001F094 +:1037C00047F8022803D001F043F8032819D11B2140 +:1037D00008A801730021817369460BA808F0A8FBB3 +:1037E000002804D1684640781B2802D0032015B079 +:1037F00000BD002108460CF0D2FC68468078002805 +:1038000001D00820F3E70120FFF7B2F90020EEE72E +:1038100070B500252F4C002807D0022817D0A9200A +:103820002D49C0000FF04DF970BDFFF7C6FF00280D +:10383000FAD1FEF7DDF9222101700572FEF7F4F9E5 +:103840002068C030417802221143417070BDFEF7FC +:10385000CFF912210170012101722168A0318A8AF9 +:103860004281CD77FEF7E0F92068C030417804222C +:10387000EAE770B50D46040004D155201649000151 +:103880000FF01FF92078012804D0134914480FF0D5 +:1038900018F970BDA18813480E4E814209D1E28803 +:1038A000824206D130681321A030808AFFF7ACFA3B +:1038B00070BD814202D1E088002815D01220287006 +:1038C000687808210843687007CC083507C50021CF +:1038D00011E0000048000020742F00003D040000AB +:1038E0006E050000FFFF0000002278231146022031 +:1038F0000CF0B3FB02213068A030C17770BDF748EF +:103900000068C0308078704738B5F44C05460178BF +:1039100020680B00A0300FF0D9F909863506067132 +:1039200013365A758600807F052803D0EC49ED4890 +:103930000FF0C7F820680422017F114301775DE092 +:10394000A98800291ED0808AE74988421AD0A86831 +:10395000002804D1E348E2490F300FF0B2F8A8681C +:1039600006220A38A86000902068AB88A030808AC0 +:10397000042101F0B7FE002804D0DA48D8491430F9 +:103980000FF09FF838BD2979807F02290BD00428D9 +:10399000F8D0284600F072FF20681321A030808AFA +:1039A000FFF732FA38BD062804D0CE48CC491E3085 +:1039B0000FF087F8284600F061FF20680122C03030 +:1039C0004178114341700520FFF7D2F838BD00F06F +:1039D0003FFF052808D000F03BFF042804D0C14871 +:1039E000BF493C300FF06DF80ECDC0480361C26096 +:1039F0008160A2210170FEF72CF938BD284600F045 +:103A00003DFF38BD00F024FF052808D000F020FF5E +:103A1000062804D0B348B2494D300FF052F80720C1 +:103A2000FFF7A6F8EAE7AF48AD495630A8E7FFB57B +:103A300093B00124684603218470C9021D460180A9 +:103A400009F063FF00226946012003F027F80646CB +:103A500009F05FFF002E5CD1684615218470490291 +:103A6000018000271C2101A808970EF0ECFE012020 +:103A70000146103108A801700020014608A84170D5 +:103A80008178F9200140891C214308A8817068468B +:103A9000017902263143017114998185C7851F215F +:103AA000018608A80A9013980D906846099009F0BD +:103AB0002CFF0EAA09A901A802F0D4FD074609F0BF +:103AC00028FF002F02D0384617B0F0BD834F68465C +:103AD0003968008F4880684684708549018008A84D +:103AE0008078F9210840801C4108490008A88170AD +:103AF00068468685068615A80D9009F006FF0EAA71 +:103B000009A901A802F0AEFD064609F002FF002E49 +:103B100001D03046D8E768463968008F88807449FC +:103B200068468470C91C0180298810A801806988B2 +:103B30004180A9888180E988C18008216846818503 +:103B4000018610A80D9009F0E0FE0EAA09A901A8AF +:103B500002F088FD044609F0DCFE002C01D020466E +:103B6000B2E768463968008FC8800020ACE770B5BE +:103B700004465E48C421A8300EF065FE5B48574DF0 +:103B8000A83000212860C943A030818200268675B4 +:103B90000120FEF7EDFF2868BF210E5401460931D0 +:103BA0000830FDF71CFF296808462D311D30FDF750 +:103BB00072FF002C26D02868B0210C501E21A18154 +:103BC000217A8F2211401031217201461831216172 +:103BD00009396161491CA1610839E161491C21620F +:103BE0009B31616287392160103161601339E16274 +:103BF000091F21637E3121643039616310318430C3 +:103C0000A163E06370BD35480068A030807F042860 +:103C100001D0002070470120704730B504460520D0 +:103C2000800395B0844208D3012080043149201AD2 +:103C3000884202D33048844202D3102015B030BDF0 +:103C400026490868A030807F012801D00820F5E7C8 +:103C5000FFF7D9FF002801D01120EFE70D68012000 +:103C600028722278002A08D024491720012A0AD075 +:103C7000022A1FD0032A25D121E03220694608708C +:103C80000020287205E0A2799209032A1AD1694618 +:103C9000087000A80622611C02300EF075FD28464F +:103CA0000622611C09300EF06FFD09A9684608F074 +:103CB0003FF9C3E7A2799209012A03D1E7E7A27984 +:103CC0009209E4D00846B9E707214907012210B557 +:103CD00041189203914213D3102010BD48000020D8 +:103CE000742F000085050000FFFF0000AC110020CC +:103CF000012A00000000FC1F0040002002320000EA +:103D0000F949024609680B7A0931184600F0A5FD09 +:103D10000020E2E7FFB599B005460020694608712A +:103D2000087208A9087408751E461446052001216A +:103D300080038904ED4AEE4B002D06D085420DD359 +:103D40006F1A97420AD39D4208D2002C09D08442B0 +:103D500004D3601A904201D39C4202D310201DB0BC +:103D6000F0BD2846204318D01F270CAB01AA0097AE +:103D700028461A99FEF7AAFF0028F0D10DAB02AA37 +:103D8000314620460097FEF7A1FF0028E7D168469C +:103D9000007AC10703D00A20E1E70720DFE78007A8 +:103DA00005D568460079800701D50B20D7E7FFF7D6 +:103DB0002AFF002801D01120D1E703AF002D0FD03A +:103DC0001A20694608731A9888732946F81C1A9AAB +:103DD0000EF0DAFC0EA903A808F0AAF80028BED15C +:103DE000002C0ED02021684601738673324621468E +:103DF000F81C0EF0C9FC0EA903A808F099F80028D9 +:103E0000ADD1B94908A80968007C08700020A6E770 +:103E1000F0B5044695B0002014900520800384423C +:103E200075D301208004B14F201AB8426FD3B04837 +:103E300084426CD2207801280CD105216068890366 +:103E4000884264D301218904411AB9425FD3A84949 +:103E500088425CD200F0FCFC022809D000F0F8FC9B +:103E6000032805D0A048BE210068095C012902D0C2 +:103E7000082015B0F0BDC121095CCA06920F03D11C +:103E80008A0701D4490701D51120F2E721780129D9 +:103E900015D0228A974D1346203BAB4272D202299D +:103EA00001D0032901D1A02A6CD3012907D00278BF +:103EB000D20704D0628A002A64D0B42A62D80029CA +:103EC00006D0012908D0022904D003295AD110E0D4 +:103ED000002512E0022510E061680125097800291B +:103EE0000BD0012907D0022905D0032903D082482D +:103EF000BFE7032501E001211491217A002907D0B1 +:103F0000012907D0022907D003293BD106E037E079 +:103F1000002604E0012602E0022600E00326002D30 +:103F200001D0022D3FD1002E3DD0E168002929D0DB +:103F30000A79002A27D0082A24D80B7B9C46082B14 +:103F400020D8002A0CD005230A689B039A4217D375 +:103F500001239B04D31ABB4212D3654B9A420FD262 +:103F60006246002A13D0896805229203914207D342 +:103F7000012292048A1ABA4202D35D4A914206D3C0 +:103F8000102076E75EE00B7B002B5BD0D5E7017855 +:103F9000890702D05848401E6BE7022D03D1022E3C +:103FA00050D0032E4ED0182269460A70228A4A80C9 +:103FB000228A8A808D71007A0127002802D0012888 +:103FC0007ED102E00020C87100E0CF711498087221 +:103FD000217802A80130012922D006210EF031FCFF +:103FE00007216846C173067409A907F0A1FF0028DC +:103FF000C7D10A206946087009A9684607F098FFEA +:104000000028BED13A206946087009A9684607F021 +:104010008FFF0028B5D1002D08D0022D06D04AE030 +:1040200061680622491C0EF0AFFBD9E7002E42D092 +:10403000002623E00168B00009580978002903D060 +:10404000012905D0072014E700216A46917001E09C +:1040500069468F70E16806220968095800A8491C62 +:1040600003300EF091FB0B206946087009A96846E1 +:1040700007F05EFF002884D1761CF6B2E068017973 +:10408000B142D7D8002612E08068B100415800A89C +:10409000102202300EF078FB3B206946087009A917 +:1040A000684607F045FF0028CDD1761CF6B2E068DF +:1040B000017BB142E8D81B2168460170877000E09F +:1040C0002EE009A907F034FF0028BCD108A84079E8 +:1040D0001B2825D1002D15D0012D0FD0022D21D068 +:1040E000032D12D11EE00000480000200000FC1F3C +:1040F00000400020E13F0000023200000320FEF7F4 +:1041000037FD11E00320FEF733FD608A00280BD055 +:1041100000228300114610460BF09FFF002803D0B9 +:104120000320A6E60220EEE70020A2E670B586B0E6 +:104130000C0006460CD00520800384424BD301209E +:104140008004FD49201A884245D3FC48844242D26B +:10415000FB4DBF212868095C022903D0C03040789C +:10416000400702D5112006B070BD002C04D02046B7 +:10417000FEF780FD0028F6D13046FEF746FD012807 +:1041800003D0022823D0EF48EDE721001BD10820FF +:1041900069468882286801ABC08805AA002103F01F +:1041A00048F80028DFD16846808A082801D003201B +:1041B000D9E7684681888181C188C18101890182EE +:1041C0004189418203A9304601F0E5FBCBE7002C91 +:1041D00001D00620C7E71020C5E770B50C4605469C +:1041E000FEF713FD012803D0022801D0D54870BD89 +:1041F00021462846FEF708FE70BD00B50146143082 +:1042000095B0192801D2880707D008461E3004D07F +:104210000A3002D0072015B000BDFFF7F4FC0028DB +:1042200001D01120F7E7C648312200684170684686 +:104230000270817009A907F07BFEECE701B582B03E +:10424000022069460880BE4802AB00686A46808842 +:10425000002102F073FE69460988022900D003207C +:104260000EBD38B502216A46118007214907012297 +:1042700041189203914201D3102038BDB049034642 +:1042800009686A468C880021204602F0D2FF694600 +:1042900009880229F1D0032038BD3EB50446082024 +:1042A0006946088005208003844208D301208004E9 +:1042B000A149201A884202D3A048844201D3102089 +:1042C0003EBD2046FEF7D6FC0028F9D1208869467D +:1042D00088806088C880A0880881E08848819848E4 +:1042E00001AB00686A46C088002102F027FE6946DB +:1042F00009880829E4D003203EBD1FB504460820E4 +:104300006946888105208003844208D30120800407 +:104310008949201A884202D38848844202D3102057 +:1043200004B0DAE486486B46006803AAC08800211E +:1043300002F07FFF0028F3D169468989082901D05E +:104340000320EDE769460988218069464988618034 +:1043500069468988A1806946C988E180E0E7FEB5A1 +:1043600005460520800317460E46814208D30121E9 +:104370008904714A731A934202D3704B9E4201D34F +:104380001020FEBD1F2F01D90C20FEBD6C4C8542B4 +:104390002AD3681A904227D39D4225D2206801A9CA +:1043A000408802F07DFD0028EFD1287869464871E9 +:1043B000206801A9408802F056FD0028E5D1694631 +:1043C0000090087802210843694608704979090776 +:1043D00003D0082108436946087020686946408870 +:1043E00002F0EBFC0028D0D169460F8120683346EB +:1043F000408802AA002102F0A1FD69460989B9425C +:10440000C3D00320FEBD38B50C4607210122490761 +:104410009203002802D04318934202D261189142BD +:1044200001D3102038BD21886A461180002801D0B0 +:1044300000290BD04249034609684D8800212846CF +:1044400002F0F7FE69460988218038BD0C2038BD8E +:1044500010B50C460521890386B08C4208D3012192 +:104460008904354A611A914202D334498C4202D3FD +:10447000102006B031E432490968A031897F05294E +:1044800001D00820F5E7FEF7C0FB012803D0022881 +:1044900026D02C48EDE720881E2801D20720E8E727 +:1044A0000620FEF765FB052168460170007981084A +:1044B000A0788900C007C00F014368460171FB2046 +:1044C0000140A0788007C00F800001436846017159 +:1044D0002188C18009F025FD0028CAD00320C8E743 +:1044E0000620C6E770B586B014460D46FEF78DFB74 +:1044F000012803D0022801D0124834E6104EC02112 +:104500003068095CC90706D0BE21095C042902D0C5 +:10451000002D02D05AE0082025E6052189038C42AF +:1045200008D301218904044A611A914202D3034944 +:104530008C4209D3102016E60000FC1F004000202A +:104540004800002001300000A178C906490F042965 +:104550000CD8E178072909D3102907D822798A4293 +:1045600004D3102A02D822881E2A01D00720FAE597 +:104570008030026BF7239172026B2179D172026B4A +:10458000117A1940A3789B06DB0FDB0019431172E7 +:10459000026B21889181026BA378517ADB0789082D +:1045A0008900DB0F19435172FB231940A378026B7A +:1045B0009B07DB0F9B0019435172006BA278017AB5 +:1045C000D206C908C900520F114301720B20694677 +:1045D0000870852D25D008DC002D1AD0812D1AD029 +:1045E000822D1AD0832D08D119E0862D1BD0882D5D +:1045F0001BD0892D1BD08A2D1BD00B2008710520C4 +:10460000FEF7B6FA684609F08CFC002813D00320A8 +:10461000A9E50020F2E70120F0E70220EEE7032001 +:10462000ECE70520EAE70620E8E70820E6E70920AE +:10463000E4E70A20E2E73068C03001784908490021 +:10464000017000208FE570B5924E0D46316886B03E +:10465000C03109781446090701D4082083E5FEF724 +:10466000D4FA012803D0022801D08B487BE5002D25 +:1046700013D005208003844208D301208004874999 +:10468000201A884202D38648844201D310206AE56A +:10469000012D0BD0022D02D106E0002C01D0072005 +:1046A00061E50020029005E0022000E0012069465B +:1046B00008710294032069460870684609F031FCCD +:1046C000002801D003204EE53068F722C030017881 +:1046D00011400170002046E570B594B014460E46B6 +:1046E000FEF793FA012804D0022802D06A4814B0D9 +:1046F00070BD684D2868C0300078800701D408205C +:10470000F5E7002C01D00720F1E7FFF77CFA00283D +:1047100001D01120EBE7002E1DD02D21684601703D +:104720002C68B420015B684641801022B11C01A8AE +:104730000EF02AF8207FFB210840B17CC907490F01 +:1047400008432077B07CFF214008A076E08A8231C0 +:104750000843E08207E02E21684601702868A030F7 +:10476000818A6846418009A9684607F0E1FB29680B +:10477000FD23C0310A781A400A70B8E710B50C461C +:10478000FEF743FA012803D0022801D0424810BDA9 +:1047900005208003844208D3012080043F49201A69 +:1047A000884202D33E48844201D3102010BD2046E7 +:1047B000FEF73AFA002010BD10B594B00446FEF79B +:1047C00024FA012804D0022802D0334814B010BDC6 +:1047D00030480068A030807F04280ED03820694619 +:1047E00008704C8001200871487109A9684607F0DB +:1047F0009FFB0028EAD00B20E8E70020E6E710B591 +:1048000094B00446FEF701FA012803D0022801D033 +:104810002148DBE71F480068A030807F04280BD0C8 +:104820003820694608704C8000200871487109A939 +:10483000684607F07DFBC9E70020C7E71548006818 +:10484000A030807F052801D30120704700207047E9 +:1048500010480068A030807F704708B513460028D4 +:1048600006D010A00068009048796A468009105C64 +:1048700018700622581C0DF087FF08BD10B50446BD +:10488000FDF7B6F9A22101700ECC08300EC0FDF77D +:10489000CBF910BD48000020013000000000FC1FD3 +:1048A000004000200302FF01FFB581B001980E46D1 +:1048B000C078174610360E37022809D0032840D09A +:1048C00005287DD0F2A1F7480EF0FBF805B0F0BD49 +:1048D000CC890A2060430E30188031230A98002AC0 +:1048E0000380F3D04868008890800020D080108139 +:1048F000097B9481891FCDB21AE0308871683880B5 +:1049000048780A7800021043F880C8788A78000254 +:1049100010433881BA1C091D28460AF014FF002DE7 +:1049200001D0002802D000203871788008360A377C +:104930002046641EA4B20028DFD101990020C8706F +:10494000C4E7CC890A2060430E30188032230A98CD +:10495000002A0380BAD04868002500889080D5805E +:104960001581087B401FC0B20090948142E07168BD +:1049700032880878FA803A79C30752085200DB0F70 +:104980001A43FD231A408307DB0F5B001A43FB2306 +:104990001A404307DB0F9B001A43F7231A40030713 +:1049A000DB0FDB001A43EF231A40C306DB0F1B01AA +:1049B0001A43DF231A408306DB0F5B011A4300E032 +:1049C00020E0BF231A404306DB0F9B011A433A71D4 +:1049D000C00978718A784B781002184338813A46BA +:1049E000C91C00980AF0AFFE002801D0BD703D80C0 +:1049F00008360A372046641EA4B20028B7D10198B1 +:104A0000C57063E7087BCC89801E85B228460830D4 +:104A100060431030188034230A98002A03808FD016 +:104A200048681746008890800020D08010819481CB +:104A30001037E000D581C0190CE03088388000982C +:104A400078602A46716800980DF09EFE009808363E +:104A50000837401900902046641EA4B20028ECD10B +:104A60006BE7FFB50546C07881B00C460A9E03008F +:104A70000EF02CF90BA3071733414F6D8F9D9D9DB1 +:104A8000A300207B1746082806D0032804D08548B9 +:104A90007FA153300EF015F804990E2008803020C5 +:104AA0000CE0207B1746042804D07E4878A17030A3 +:104AB0000EF007F804990E20088031203080002F76 +:104AC00044D060680088B880607AFF300130F88098 +:104AD000E08938810020B88137E0207B1746042820 +:104AE00004D070486AA18C300DF0EBFF04990E20C1 +:104AF00008803220E2E7207B1746022804D069486C +:104B000063A1A8300DF0DDFF04990E20088033204A +:104B1000D4E7207B1746042804D062485CA1C33048 +:104B20000DF0CFFF04981021018034203080002F39 +:104B30000CD060680088B880607AFF300130F8805F +:104B4000E08938810020B881F881E870BEE6207BDA +:104B50001746052806D0062804D052484CA1E0305C +:104B60000DF0AFFF04981221018035203080002F16 +:104B7000ECD060680088B880607AFF300130F8803F +:104B8000E0893881E089B88100203882A988F981DC +:104B9000DBE7207B1746072804D042483CA1F730CA +:104BA0000DF08FFF04990E200880362086E70096CE +:104BB0002846049B00F02BFD88E635A13A480DF00D +:104BC00080FF83E670B5054600780C460826030092 +:104BD0000EF07CF8124C3434241C380A0A0A0A0AF3 +:104BE0000A0A0A0A0A0A0A4C6878002804D02E48E1 +:104BF00027A12C300DF065FF002C03D12A4824A1F9 +:104C00002D3008E060783043607020E0002CF9D14E +:104C100025481FA135300DF054FFF3E7002904D0DB +:104C200021481BA13D300DF04CFFFCF7E1FF04468D +:104C3000407830436070FCF7F7FF08E01A4814A191 +:104C4000473002E0184812A14C300DF03AFF002C1A +:104C50000AD06078000707D593202070204658229C +:104C600029460830FBF7B0FA002070BD0E4808A1B5 +:104C70005030EAE710B500200C4C0D490346C20045 +:104C80008C525218401C0006D370000EF7D010BD95 +:104C90007372635C67617474635F636F72652E63C4 +:104CA000000000005A020000B2030000FFFF0000F5 +:104CB0004C000020FD4908800120887000207047CA +:104CC000FA4900208870704710B50021F748C943A1 +:104CD00001800021C17007F065F9D8E7F7B584B00D +:104CE0000546002768460781878068680C4600886B +:104CF00000F0EAFB0646287A032805D0002E03D1EF +:104D0000EB49EC480DF0DDFE287A2146C01E123139 +:104D1000009103000DF0DAFF0FF1F0EF3D09AA4614 +:104D20005C6D34B3CCF28B8BEF00F078012803D0AC +:104D3000DF49AD200DF0C5FEA8896946C0000E30E0 +:104D4000888030200881002C22D068680188A180EA +:104D5000E7802781A989A18100200DE0C100B279F7 +:104D600009190A74B288CA8182005219D3894B8208 +:104D7000128A401C8A8280B2A1898142EED8D6E094 +:104D800002A8009001AB22462946304600F0CAFB3B +:104D9000F0E002A8009001AB22462946304600F020 +:104DA00003FCE7E0F07806281AD0FF20C049223043 +:104DB00014E068680188A180E7802781A989A18122 +:104DC000B188E181E9892182EA89296900982BE08B +:104DD000F078062804D0FF20B5493C300DF071FE74 +:104DE000E88969461230888035200881002CE0D19E +:104DF000C0E0F078072804D0FF20AD4956300DF010 +:104E000060FEA88969460E30888036200881002C13 +:104E1000BED068680188A180E7802781A989A18127 +:104E20002046AA890E3029690DF0AEFC7FE0E889A2 +:104E30006946123080B2382288800A81002C78D0EE +:104E400068680188A180E7802781A989A181287AE3 +:104E5000102809D00221A173E9892182EA892969F0 +:104E600000980DF091FC85E00121F4E702A8009084 +:104E700001AB224629463046FFF716FD7AE0F0786E +:104E8000082803D08A498C480DF01BFE142069467F +:104E9000888037200881002C6CD068680188A18048 +:104EA000E7802781A989A18167820120A0733EE064 +:104EB000F078092804D080487D4917300DF001FEB4 +:104EC000288A69461430888037200881002C51D008 +:104ED00068680188A180E78004212781A173A989DE +:104EE000A181E9892182298A618220462A8A143097 +:104EF000696999E702E038E01CE024E0F0780A28CC +:104F000004D06D486A4932300DF0DBFD142069464B +:104F1000888037200881002C2CD068680188A18007 +:104F2000E78027810521A173A78127826782F77017 +:104F300020E017E002A8009001AB22462946304647 +:104F4000FFF78FFD16E00D206946392288800A811F +:104F5000002C07D00120E08054480188A1802781DF +:104F6000277307E00699088010E0524850493C300A +:104F70000DF0A7FD6846069980880880002C05D0B2 +:104F8000684600892080684680886080002007B0DD +:104F9000F0BDF7B594B015460F46149800F09FFA8F +:104FA00004000AD0032000F087FB022802D2E07838 +:104FB000002804D0112017B0F0BD4048FBE71720AF +:104FC000694601260883002D0FD003216846017130 +:104FD0001021018210A80246059004A928460AF073 +:104FE000D8FB00280DD00720E5E7082168460171AD +:104FF00000210781C943418105218673C90281814E +:105000000CE0A878A0712888A080684605218673E6 +:10501000C902818100210781C943418109AA023265 +:1050200006A901A806F0F7FF002802D000F06AFAEE +:10503000C1E707A800906846038B04220321149857 +:1050400000F050FB0028B6D1E670B4E770B592B01E +:105050000D0006460ED000F042FA04000CD00320EA +:1050600000F02AFB022802D2E078002806D01120A6 +:1050700012B070BD1020FBE71048F9E71721684611 +:10508000818004210172298881816988C18101217F +:1050900081740B4901820AAA023201A902A806F012 +:1050A000BAFF00280ED000F02DFAE1E74C000020F6 +:1050B000904C00003B04000063020000013000003F +:1050C0000228000008A80090684683880422032173 +:1050D000304600F007FB0028CAD10221E170C7E783 +:1050E00070B592B00D0006460DD000F0F8F904003E +:1050F0000BD0032000F0E0FA022802D2E07800286A +:1051000005D01120B4E71020B2E7FA48B0E7172124 +:105110006846818004210172298881816988C18162 +:1051200001218174F44901820AAA023201A902A86C +:1051300006F071FF002802D000F0E4F998E708A813 +:1051400000906846838804220321304600F0CAFAA2 +:1051500000288DD10321E1708AE770B592B00D006F +:1051600006460DD000F0BBF904000BD0032000F080 +:10517000A3FA022802D2E078002805D0112077E7B0 +:10518000102075E7DB4873E7022168460172298821 +:1051900081816988C181172181800AAA023201A90F +:1051A00002A806F038FF002802D000F0ABF95FE754 +:1051B00008A800906846838804220321304600F046 +:1051C00091FA0028DBD10421E17051E7F0B591B0EC +:1051D00015000E4607460ED000F081F904000CD0F1 +:1051E000032000F069FA022802D2E078002806D0F5 +:1051F000112011B0F0BD1020FBE7BE48F9E71721E0 +:105200006846818004210172298881816988C18171 +:10521000B1788174318801820AAA023201A902A8F8 +:1052200006F0F9FE002802D000F06CF9E1E708A8CA +:1052300000906846838804220321384600F052FA21 +:105240000028D6D10521E170D3E7F7B592B0154615 +:105250000E46129800F043F904000AD0032000F033 +:105260002BFA022802D2E078002804D0112015B0D1 +:10527000F0BDA048FBE70627002D12D06846077254 +:105280008681C581A5801720694688800AAA0232D6 +:1052900001A902A806F0BFFE002807D000F032F9ED +:1052A000E5E70521684601728681EBE708A80090D2 +:1052B0006846838804220321129800F013FA00281C +:1052C000D5D1E770D3E7F7B592B016460D000ED0F2 +:1052D000129800F004F904000BD0032000F0ECF960 +:1052E000022802D2E078002805D01120BFE7102064 +:1052F000BDE78048BBE7072768460772868117210C +:10530000049581800AAA023201A902A806F083FE50 +:10531000002802D000F0F6F8A9E708A80090684637 +:10532000838804220321129800F0DCF900289ED122 +:10533000E7709CE7F3B5172091B00C46002915D013 +:1053400021780B000DF0C2FC062B05051A041C2B5E +:105350001520C01EE28880B2002A02D0A368002B6C +:1053600004D0824204D90C2013B0F0BD1020FBE71A +:10537000042905D0A088002811D101E00620F3E718 +:10538000119800F0ACF805000BD02078092701280F +:105390001AD0022807D0042824D0052835D00720A9 +:1053A000E2E75448E0E76846077161880181E188D7 +:1053B0004181A06808260390304600F07DF9072857 +:1053C00029D34C48801CCFE70C21684601716188C5 +:1053D0000181E1884181A06803900EE0E87800280F +:1053E00011D118E00D216846017161880181A18801 +:1053F0004181E1888181A06804900326304600F055 +:105400005BF90228EAD31120AEE70E21684601714C +:10541000217B0172F1E717216846018309AA023254 +:1054200006A901A806F0F7FD002802D000F06AF8EE +:105430009AE707A800906846038B0422314611982A +:1054400000F050F900288FD12178012907D00229D6 +:105450008AD0042905D0052905D0032084E7082136 +:1054600002E0EF7080E70A21E9707DE730B591B086 +:105470000C46054600F033F8002808D0032000F061 +:105480001BF9022805D31B48801C11B030BD1948F8 +:10549000FBE70F216846017104811721018309AAE6 +:1054A000023206A901A806F0B6FD002802D000F0DD +:1054B00029F8EAE707A800906846038B0422032135 +:1054C000284600F00FF9E0E70C49884205D00C4966 +:1054D0000988814201D10A4870470020704710B501 +:1054E000FFF7F2FF002802D08178C90700D1002021 +:1054F00010BD00000130000003280000FFFF000085 +:105500004C000020002806D0012805D0052805D031 +:10551000062805D0032070471120704708207047E7 +:105520005C487047FFB583B003980C9EC0781D4659 +:1055300014460F46012803D05749D2200DF0C1FA76 +:10554000F889C0000E30288030203080387B001F62 +:10555000C0B20190002C26D078680088A08000207E +:10556000E0802081F889A081002616E0F00005196E +:10557000C01900902A4641690E3201980AF0E3F8FA +:10558000002802D000202874E8810098761C008A48 +:1055900068820098B6B2408AA882A089B042E5D855 +:1055A00003990020C870F2E4F8B50646C0781F469B +:1055B00014460D46042804D0FF20374903300DF06F +:1055C00080FAA889062148430E3038803321069896 +:1055D000002C01801AD068680088A0800020E0803C +:1055E0002081A989A18103460CE019460622514376 +:1055F0004A190919D789CF81977C8F74128A5B1C4D +:105600000A829BB2A1899942EFD8F070F8BD70B5BB +:1056100014460546142204981A8037220280002C72 +:1056200018D0486800260088A080487AFF300130F2 +:10563000E080C8892081C889A0816682E87808282E +:1056400009D0092811D00A2819D0134913480DF0A0 +:1056500038FAEE7070BD087B0C2804D00F480E4954 +:105660000C380DF02EFA012012E0087B0D2804D032 +:105670000A48094908380DF024FA042008E0087B9C +:105680000E2804D005480449001F0DF01AFA052021 +:10569000A073DEE702300000904C000081030000A0 +:1056A00001460020FA4A02E0401C082803D24300C9 +:1056B000D35A8B42F8D1704730B50446F44A0020E3 +:1056C000163A117953790AE05518AD79A54201D1FE +:1056D000401CC0B2491CC9B2102900D100218B4224 +:1056E000F2D130BDFFB5EA4881B0163841790A9C45 +:1056F000491CCDB21E46102D00D10025E4481638B5 +:105700000079A84202D1042005B0F0BD0820FFF7BF +:10571000D3FF0746072804D9FF20DEA1A5300DF0EE +:10572000D0F90298082801D1072F17D001982080BE +:10573000301D6080002060712071E6800398208118 +:10574000204606F019FC00280AD0D14802991638E4 +:105750004379821D995445710020D5E7D248D3E79B +:10576000FF20CCA1B7300DF0ACF90320CCE7F0B5A9 +:105770008DB0044600256846057116468C46062005 +:10578000FFF79AFF00281CD121780127C8070028BD +:1057900001D0132917D9684687766178C17602212E +:1057A0008183C58304A8009070680C2300880522BB +:1057B0000621FFF797FF002803D0B6A185200DF042 +:1057C00080F90DB0F0BDB24816380278002AF8D042 +:1057D000427863789A42F4D1012918D0132919D15B +:1057E0006146062916D10570002101200AF0D7FC78 +:1057F00068460771706801886846C1800021C94306 +:105800000181607922790102114368461AE06146FC +:10581000062908D0684600790028D2D0314601A870 +:10582000FEF727F8CDE70570002101200AF0B7FC4C +:105830006846077160792279010211436846018147 +:105840000021C9434181E9E7914810B5002116388C +:1058500001704A1E428041700171417101200AF0BD +:105860009EFC10BD10B5FFF7EFFF002088490246EF +:105870004300401CCA520828FAD310BD8449163987 +:10588000488000207047DFE770470EB50121684669 +:10589000017086498180C1800021FDF7EAFF0EBDBD +:1058A000F7B505460078002700090C463E4601285A +:1058B00004D0FF2077A168300DF003F9287A022880 +:1058C0000CD0FF2073A17E300DF0FBF80298002C65 +:1058D000068001D0278066800020FEBDEA897027FF +:1058E00010460A3086B2002C0BD068680088A08071 +:1058F000A8892081E28020460A3029690CF044FF03 +:10590000E4E702980680E7E7F0B543680246D979F4 +:105910009C79090221435C7A1E7A25025C88981DD5 +:105920003543241F87B0A1421DD11B79022B1AD108 +:10593000042D1AD0052D2AD0062D1AD0402D12D3B1 +:10594000061D0F4614462846FFF7AAFE08280AD06F +:105950001120207002202072A581E78126616078E5 +:1059600008210843607007B0F0BD001D00F0E1F8A9 +:10597000F9E7041D0D46FEF761FF0028F3D006216C +:10598000684601700194057208F0CBFAEBE7001D40 +:10599000FFF7EDFEE7E710B53D4C8AB0163C2278E4 +:1059A000012A26D012236A46937363789B1CD37313 +:1059B000082313820B8853824B8893828B88D3826F +:1059C000C988118301A900910C2305220721FFF743 +:1059D00089FE00280BD10022F023114601200AF095 +:1059E0003CFB012020706078801C607000200AB0B1 +:1059F00010BD1120FBE7F0B5254C0027163C87B001 +:105A00000646A51D1FE060792179884204D1112046 +:105A100020A140010DF055F82079405D042804D004 +:105A2000082808D17F1CFFB205E0072069460870EE +:105A3000684608F076FA2079401CC0B22071102820 +:105A400001D1002020713046761EF6B20028DAD14E +:105A5000384688E710B50446402801D2072010BD1B +:105A6000FFF71EFE082802D03120000210BD0021E1 +:105A7000074802E0491C082903D24A00825A002A3A +:105A8000F8D1082914D049004452002010BD00006C +:105A90002E1300207372635C6C326361705F636FFE +:105AA00072652E630000000003300000FFFF00005D +:105AB0000420EBE700B5402801D2072000BDFFF726 +:105AC000EFFD082805D000213B4A4000115208464E +:105AD00000BD052000BDF0B58BB016460C00074692 +:105AE00007D0002E05D06188402904D207200BB0D2 +:105AF000F0BD1020FBE72088002801D0172801D92D +:105B00000C20F4E70846FFF7CBFD08280FD02588C6 +:105B100003A82A46314602300CF036FE01A8009058 +:105B200062882B4608213846FFF7DCFDDFE70520B9 +:105B3000DDE7F0B50E46074601468BB01446012559 +:105B4000304606F0E5FB08281DD10020694608858F +:105B50000120FFF7B1FD002802D117206946088512 +:105B600003AB02330AAA39463046009406F0E3FF3D +:105B700000280AD0022819D0032804D0FF200F499A +:105B800002300CF09EFF2846B1E76846038D002BDB +:105B9000F9D001A800906068042200880121FFF775 +:105BA000A1FD0028EFD00549EC20EAE76078002548 +:105BB000102108436070E6E72E130020945A00007D +:105BC000002803D08178012939D101E010207047E5 +:105BD0000188FA4A881A914233D01BDCF84A881AA5 +:105BE00091422ED00BDC00292BD00320C002081AD2 +:105BF00027D0012825D001210903401A07E00128F8 +:105C00001FD002281DD0FF281BD0FF3801380028E4 +:105C100015D116E0FF220132811A904211D008DC22 +:105C200001280ED002280CD0FE280AD0FF2806D169 +:105C300007E0012905D0022903D0032901D0002063 +:105C400070470F20704700B50A2821D008DC0300F8 +:105C50000DF03CF80A1C2024241A24282224261A99 +:105C6000102819D008DC0B2816D00C2814D00D28C9 +:105C70001AD00F2808D111E011280FD0822807D0A0 +:105C800084280DD085280DD0032000BD002000BD44 +:105C9000052000BDCB4800BD072000BD0F2000BD82 +:105CA000042000BD062000BD0C2000BD70B50029F9 +:105CB0000BD0CB1FFA3B81241E46CDB2112B1BD239 +:105CC000012805D0022806D009E0002010701DE050 +:105CD000FF20043001E0FF200330814218D0330060 +:105CE0000CF0F4FF111613131613161613161616CE +:105CF00013131313161316000846FF3881381F2894 +:105D000003D9FF39FE39022902D81570002070BD71 +:105D10001470072070BD00B503000CF0D7FF060417 +:105D200006040C080A0C002000BD112000BD07204D +:105D300000BD082000BD032000BD00780207120F3F +:105D400004D0012A05D0022A0AD10EE0000907D1A9 +:105D500008E00009012805D0022803D0032801D05B +:105D60000720704708700020704706207047002801 +:105D700007D0012807D0022807D0032807D0072022 +:105D80007047002004E0112002E0212000E03120D3 +:105D900008700020704738B50C4605004FD06946A2 +:105DA000FFF7CBFF002822D12088032189028843F6 +:105DB000694609788907090D084320806946681CEF +:105DC000FFF7BBFF002812D1218803200003814385 +:105DD000684600788007800C01432180A87840073E +:105DE000820F2020012A03D0022A03D0072038BDC9 +:105DF000814300E00143218088B20105890F08D06A +:105E0000012189038843A9780907C90F8903084339 +:105E1000208080B28104890F0AD0A9784004C90685 +:105E2000C90F400CC903084320808004800F02D1B1 +:105E30002088400403D5208840210843208000208A +:105E400038BD70B504460020088015466068FFF72D +:105E5000A2FF002815D12189A089814210D861684C +:105E6000594E8978C90707D0711E884208D8314633 +:105E70000CF004FD298009E0FF21FF31884201D99F +:105E80000C2070BDFF30FF300330288060688078C0 +:105E9000C007A08903D031460CF0F0FC03E0FF30CE +:105EA000FF30033081B22980206881784748017330 +:105EB00020684649008820394885002070BD10B50B +:105EC000137804785B08E4075B00E40F2343137046 +:105ED000FD2423400478A407E40F640023431370D7 +:105EE000FB24234004786407E40FA40023431370C9 +:105EF000F724234004782407E40FE40023431370BD +:105F0000EF2423400478E406E40F240123431370B4 +:105F1000DF2423400478A406E40F640123431370B4 +:105F20000078BF244006C00F234080010343137054 +:105F3000002906D00878C10701D1800701D50120CA +:105F400000E00020C0015906490E0843107010BD42 +:105F500030B50A8803239B0204889A4323059D0FCA +:105F600002D1A3049C0F01D09B0F00E001239B02F0 +:105F70001A4303230A801B039A4303889804840F5F +:105F800002D11805830F01D0800F00E0012000032B +:105F900002430A8030BDF3B591B00D0018D01198BE +:105FA000002818D0122128460CF04BFC01A9012032 +:105FB00007F0A8FD00242646374677E002290000B6 +:105FC00001280000023000000102000060130020E0 +:105FD000102013B0F0BD0720FBE76846007C0128C5 +:105FE0000BD16846C1890520C002081A0AD00128D1 +:105FF0000AD002280CD003280CD0042C0ED0052C7B +:106000000FD10DE0012400E002246846868908E0F3 +:10601000032406E068460424878902E0052400E0A2 +:10602000062468468189119881423FD12C74002E44 +:106030003AD00BA800900CAB10220021304607F09C +:10604000F3FD002820D16846808D2A46C0B20CA9F5 +:1060500009F079FB002817D1AE81002F24D00BA8BE +:10606000009006AB13220021384607F0DDFD002822 +:106070000AD16846808D06A9C01E0331C0B22A1D10 +:1060800009F061FB002801D00320A2E76846817E69 +:10609000427E08021043E881062C05D16846007C48 +:1060A000A8726846C0892881002092E701A807F0FD +:1060B00031FD002891D0FFF7C6FD8AE7002804D003 +:1060C000012903D0022904D003207047F949C98D62 +:1060D00002E0F8494031C988814201D1002070476F +:1060E0000720704730B5F34C0025608B91B0C00B92 +:1060F0002ED1216900292BD0207B800728D40122B2 +:1061000068460271027200224272228B8281A28A48 +:10611000828204911721018309AA0023023206A971 +:1061200001A807F0BBF8002803D0FFF7F4FD11B079 +:1061300030BD207B02210843207307A800906946E8 +:106140000B8B208804220121FFF7CCFA05460BE0D7 +:10615000FBF74EFD842101700921017218341ECC19 +:106160000C301EC0FBF760FD2846E0E710B5D14CAF +:10617000034621690020002909D02146012210315F +:106180001846FBF707FF00202061A0820120217B39 +:10619000F9221140217310BD70B50C4605461C2133 +:1061A00020460CF04EFB00202080002D08D0012D51 +:1061B00004D0C1A1C5480CF084FC70BD062000E0ED +:1061C0000520A07070BD10B507F090FA10BDFEB5A7 +:1061D0000546007800260C46374603000CF076FD95 +:1061E0000C91070C1D962F462F46486C89916868C4 +:1061F0000A38FBF72FFE89E0002904D0B348AEA18E +:106200001B300CF05EFCFBF7F3FC044640780821E1 +:1062100008436070FBF708FD78E0002C04D1BB2038 +:10622000A5A180000CF04DFC284601F05BFA002887 +:106230006CD06078082108436070022666E0E88828 +:10624000694608800190002C04D1A0489AA12F3003 +:106250000CF037FC287807281CD10198C00B19D006 +:10626000944800218171A988818012E003264DE0C5 +:10627000002C04D1C52090A180000CF022FC8D4898 +:10628000017B89070BD50069002802D0E888C00B84 +:106290003CD00226607808210843607036E0291D52 +:1062A0008EC918308EC02838018802260122204667 +:1062B000FBF752FE0127EDE7002C04D183487EA1B5 +:1062C00064300CF0FEFB7B480821007B4007C00FC8 +:1062D0004600607808436070002E17D128790128A5 +:1062E00002D16879002811D02046FFF73FFF07460A +:1062F0000CE0002CCED10D206FA180010CF0E1FB51 +:10630000C8E772486CA17A300CF0DBFB002C0CD093 +:106310006078000709D5002F07D18420207020461F +:10632000582229460830F9F74FFF3046FEBDF7B531 +:10633000027A88B00C46054620460C30049006923E +:1063400016300027921E02903E460A31594813002B +:106350000CF0BCFC0ADF06E62AE62AE66A98C6E6E6 +:106360004288002A02D052270726DDE051271E2648 +:10637000002C7DD06A684F481288A2800122A27149 +:106380008079C0004019C089FFF705FE002877D149 +:1063900048488179C9004919C98921818079C0009B +:1063A0004019408AA083BFE0688A009006980728B9 +:1063B00017D1E889C00B14D000985127223086B23B +:1063C000002C55D0A8890499FFF7E5FD002857D186 +:1063D00068680088A0800220A071A889208101201F +:1063E00041E000985027203086B2002C40D0A88988 +:1063F000FFF7D1FD002843D168680088A080A889F4 +:10640000E080287A07280AD002202072288AA083F8 +:106410000098E083204669692030009A01E001205D +:10642000F3E70CF0B1F97FE0698A00910169002976 +:1064300002D0E989C90B22D00099512722318EB2AE +:1064400000218171A9898180002C5FD00088A08003 +:10645000A8890499FFF79FFD002811D10220A0719F +:10646000A88920810420A072288AE083009801E096 +:106470004CE005E020846969009A0298D1E7032086 +:106480000BB0F0BD007B400702D55127222601E06A +:1064900050272026002C39D06868502F0088A08013 +:1064A00016D00220A0712146287B0831FFF774FE28 +:1064B0003AE00000401300207372635C67617474FB +:1064C000735F636F72652E6300000000CB020000F3 +:1064D000287BA11DFFF760FE0020FFF747FE23E0A9 +:1064E000A9890089884207D154270626002C0DD09F +:1064F00068680088A08017E053270826002C05D084 +:1065000068680088A080A889E0800DE00A9806806D +:1065100010E055270726002CF8D00020A07103E0DA +:10652000FD49FE480CF0CDFA0A98002C068001D0F7 +:10653000278066800020A3E7F948002101722038F7 +:10654000418081718180027BF923520852001A40F8 +:10655000027301618182704770B5F14C86B0203CB6 +:10656000208000206080A071A0806946012007F093 +:10657000C9FA102608E00199088802461207D20FCE +:10658000B043120110430880684607F0C3FA0500C3 +:10659000F1D02069002804D0E048DF4931300CF008 +:1065A00090FA207B800704D5DC48DB4932300CF0C0 +:1065B00088FA822D04D02846FFF745FB06B070BD4F +:1065C0000020FBE7D64810B52038017B012211439B +:1065D0000173002141808171818006F05BFA10BD5A +:1065E00010B5CF4C0020C043203C20800020FFF796 +:1065F000BDFD207B40084000207310BD70B5C84D24 +:106600000446203D287B800704D5C448C249493050 +:106610000CF057FA287BC00706D12888C149884268 +:1066200002D02869002801D0082070BD002C08D0B5 +:10663000A088162801D2092070BD20682861A08892 +:10664000A882FFF74FFD70BD10B50C4607F04BFA5E +:10665000002803D0B049B4480CF033FA2046FFF7C5 +:10666000F2FA10BDF0B5AE4D0446203591B00020D1 +:10667000089068820E462882E8812946E8804039E1 +:106680000886694608830885088688838882A44826 +:106690000E90007A1746012808D0022806D0032859 +:1066A00004D0042802D0082011B0F0BD05239B03BC +:1066B0009C421CD3012080049C49221A8A4216D392 +:1066C0009B4A944213D29E4211D3331A8B420ED36B +:1066D00096420CD26268002A16D005239B039A4288 +:1066E00005D3101A884202D39148824201D3102068 +:1066F000DAE760892189884203D801225202914257 +:1067000001D90C20D0E7089010AA0CA93046FFF759 +:1067100098FB0028C8D106A92069FFF73CFB002898 +:10672000C2D1206900280CD0607880070028684614 +:10673000008B03DA8004800F56D002E08004800FC3 +:1067400052D105A96069FFF726FB0028ACD160692A +:10675000002808D06846808A0105890F012943D1A5 +:106760008004800F40D007A9A069FFF714FB002820 +:106770009AD16846008B800636D46846808A8006A7 +:1067800032D46846808B81062ED4A169002906D0B8 +:106790000105890F012927D18004800F24D0E068EA +:1067A000002804D0007800281ED01C281CD25C4A87 +:1067B000611C123220460992FFF781FB0321002061 +:1067C0008902884301218902411868460D9101859B +:1067D0000121817457490182514A0FA9153230684D +:1067E00008F0D7FF002801D007205DE708A8007F48 +:1067F0004B49C01CC2B26A7100201031FF320090B8 +:106800000190FF3203460291039003320AA904A8C3 +:1068100007F004F9002827D141482038008E0B905A +:106820003F4833893830326901461239029100936A +:106830000192039010A90A8873890CA9306807F0A7 +:10684000EDF801007AD13648E98811308170090AE3 +:10685000C1700026009631386A79008E3146099B56 +:1068600007F05BF8002802D0FFF7EDF91CE70E985F +:10687000807CC00928D068460D990185012181746A +:10688000292109020182AE81287B61784008C9076D +:106890004000C90F08432873FD2108406178204A51 +:1068A0008907C90F4900084328732A32901C022126 +:1068B000029200910190002303961F4A0AA904A89E +:1068C00007F0ACF80100BDD1606800283FD0206916 +:1068D00000280DD106A90CA8FFF73AFB60788007C5 +:1068E00006D46946088B0321090388436946088357 +:1068F0000120694688740F48FE3008820E492089BD +:10690000891E0BF0BBFF62680548089B2E3003967A +:1069100000930192029012E0B8640000220400008B +:1069200060130020FFFF0000260600000000FC1F8F +:1069300000400020032800000302000086E00A4611 +:10694000002306A904A807F069F801007ED1207889 +:10695000C10601D480062BD56846068460690028EC +:106960000DD105A90CA8FFF7F3FA6846818A032028 +:1069700080028143012080020918684681826946AD +:10698000888A482108436946888201208874F8482B +:106990000882F84908AA022001920291009000237F +:1069A0000396F54A05A904A807F038F8010062D15A +:1069B0002078C0072DD068460684A06900280DD134 +:1069C00007A90CA8FFF7C4FA6846808B0321890247 +:1069D0008843012189024118684681836846818B7A +:1069E000402001436846818301218174E04908AA5F +:1069F000491C0182DF480221801C01920091029013 +:106A000000230396DC4A07A904A807F007F8010051 +:106A100031D1E068002832D068460D990185012106 +:106A20008174D349891C0182E16808A80A78027040 +:106A300049784170E068418868464184E06801799E +:106A400008A80171E068C18808A800E013E041715E +:106A5000090A8171C7480722001D08A90092019107 +:106A60000290412200230396D2000AA904A806F04E +:106A7000D5FF010003D00B98FFF7E6FD14E60321D4 +:106A80000E98002F017207D0E8883880E889788056 +:106A9000288AB880688AF880002005E6F0B50124CD +:106AA0008BB016460F46012802D002281BD104E005 +:106AB000684605218474C90202E06846AF498474BF +:106AC0000182002F11D00321002089028843012177 +:106AD000890241186846018506AA05A9384608F0CA +:106AE00058FE002803D00720CAE41020C8E4A14DB6 +:106AF000B878303D287338882F46203F78856A461D +:106B0000127D0020294606AB00920E310193FF3220 +:106B1000029103900346FF3203320AA904A806F04B +:106B20007DFF002802D0FFF78EF8A9E4002E01D0E7 +:106B3000F88D30802C720020A2E470B592B0064629 +:106B4000012508A885708E496846018406F0DDFE9F +:106B5000002208A90120FFF7A1FF044606F0D9FE94 +:106B6000002C02D0204612B070BD0024002E3ED072 +:106B70001C2168460BF067FE68460178202001431F +:106B80006846017008A885707E49684601841194A2 +:106B90000794817FF9200140891C68468177002095 +:106BA0000146684601770020014668464177042186 +:106BB0008185C485018607A80A9011A80D9008A8B0 +:106BC000099006F0A2FE0EAA09A96846FFF74AFD41 +:106BD000054606F09EFE002D01D02846C3E7654815 +:106BE0006946098F503801816946898F4181614822 +:106BF000303804720020B6E7F7B55E4E9CB0002135 +:106C0000303E0091317A012904D0022902D00820B7 +:106C10001FB0F0BD57495039CA8D824201D00620BD +:106C2000F6E71D98824201D10720F1E75348012180 +:106C300010AA9176401C1083002003239B02024679 +:106C40009A438B02D31810AA93846A4691844E49C2 +:106C5000D18410AA9077908317AA0A926A469185E8 +:106C60000C9009A806F075FF00242546274604A9C4 +:106C700009A806F071FF002810D0822877D1002CD7 +:106C80006AD0002D68D010A80481458100240475C5 +:106C900018A8807812AD012860D077E06846807D22 +:106CA000002F1FD0012853D16846818A3348401CE9 +:106CB000814219D114A800906846408A0EAB102278 +:106CC000002106F0B1FF002874D110A8008A042822 +:106CD00001D0062849D16846018F1D98814237D1DD +:106CE0000F2095E7012833D16846808A0521C90223 +:106CF000884202D0491C88422AD11E485038C18D92 +:106D00006846408A814201D1012700E00027002C1B +:106D100001D0002D0DD01D99884219D114A90091E0 +:106D200004460EAB1022002106F07EFF002841D160 +:106D300001E0009D0CE010A8008A022801D0102874 +:106D400013D1C0B218AA0EA908F0FDFC00280CD17E +:106D50006846408A00908AE7052059E72A1D15A950 +:106D600018A808F016FD002810D0032050E721E0F5 +:106D700002290000901300200302000001280000F7 +:106D800001180000052A0000FFFF000010A8007D88 +:106D90000023001DC2B210A802751E98029019A906 +:106DA00001950394009216A806F038FE002801D140 +:106DB00002213172FEF747FF2AE73EB50B46401E1F +:106DC00084B201AA00211846FFF779F806F09DFD6C +:106DD00002A8009001AB01220021204606F09DFD93 +:106DE000044606F096FD68460089012803D0FE4956 +:106DF000FE480BF066FE2046FEF725FF3EBDF0B5CF +:106E0000FB4E0446307A89B00F46032804D004288C +:106E100002D0082009B0F0BD04AA06A92046FFF759 +:106E200010F80500F6D1F24823893830226901466E +:106E30001039029100930192039069460A8A63898E +:106E400006A9206806F0EAFD002802D0FEF7FBFE46 +:106E5000E0E7002F03D0E648203000893880042086 +:106E600030722846D6E738B50C00054608D0002217 +:106E7000694606F033FF002804D0FEF7E4FE38BD73 +:106E8000102038BD69462046FEF785FF0028F8D15E +:106E9000A0786946C207D20F284606F03AFFECE711 +:106EA0003EB50C0008D002AA694606F017FF00287C +:106EB00004D0FEF7C8FE3EBD10203EBD0321204693 +:106EC0000BF0BFFC6846008801A90005800FFEF7A3 +:106ED0004EFF00280BD16846007920706846008874 +:106EE00001A98004800FFEF742FF002801D0032093 +:106EF0003EBD684600796070A278EF200240684687 +:106F00000088C10B09010A43F7210A404104C90F57 +:106F1000C9000A43A270F9210A40800601D5012068 +:106F200000E00220400069460243097A5008400010 +:106F3000C907C90F0843A07000203EBDFEB51D461D +:106F400014000E46074615D0002D13D006F0DDFCC8 +:106F500001A8009022882B463146384606F0DDFC19 +:106F6000054668468088208006F0D3FC2846FEF758 +:106F70006AFEFEBD1020FEBDF0B50C46002199B0A2 +:106F80000746684681850D46002C11D0E068002830 +:106F900006D0A06800280BD002886B469A85018035 +:106FA000A078012806D0022804D0072019B0F0BD2F +:106FB0001020FBE72088002807D0401E80B201A9DE +:106FC00006F0A0FD002842D136E08A48EEE7694687 +:106FD0008A8921888A420BD26846007C00250128D4 +:106FE0002CD16846C0898449884227D1012525E0F3 +:106FF0008A4203D1002D2FD06D1C01E0022D02D05A +:10700000032D1BD31FE06946097C012916D169466F +:10701000794BCA895B1ED11A9A421DD005DC77488C +:10702000101A19D0012809D116E0012914D0FF390E +:10703000013903D1032506E00D26B60201A806F0AA +:1070400069FD0028C3D0822804D0002806D0FEF7AE +:10705000FAFDABE7022DFAD13046A7E7E068002839 +:1070600013D006F052FC0BA800906A46A188208835 +:10707000928DE36806F051FC054606F04AFC002DAF +:1070800019D16846A168808D088002980078C006F2 +:1070900001D55B488AE706F038FC0EA800906846E8 +:1070A00080890CAB0222002106F0BEFD054606F0E9 +:1070B00030FC002D01D02846C9E76846008F022821 +:1070C00001D0032072E7A078012808A8007C03D033 +:1070D00080070ED4082069E7C007FBD00820FEF720 +:1070E000EBFA072802D34348401C5FE7082502203B +:1070F00001E00225032069460876218868468183DD +:107100001721818611AA002302320DA906A806F0D4 +:10711000C5F8002802D0FEF7FEFD47E70FA8009053 +:107120006846838E042229463846FEF7DBFA3DE79F +:1071300070B5064615460C460846FEF741FD002888 +:107140000AD106F0E2FB2A4621463046FFF7A6FCAC +:10715000044606F0DEFB204670BD70B514460D46B1 +:10716000064606F0D2FB224629463046FFF744FD8C +:10717000044606F0CEFB204670BD70B51E46144690 +:107180000D001AD0002C18D06168002915D00121FB +:10719000FEF794FF00280FD12068FEF711FD0028AC +:1071A0000AD106F0B2FB324621462846FFF75AFACA +:1071B000044606F0AEFB204670BD102070BD70B5D1 +:1071C00015460C0023D00221FEF778FF00281DD1C0 +:1071D0002068FEF7F5FC002818D106F096FB29463A +:1071E0002046FFF70CFE0DE0B86400003C060000EE +:1071F0006013002002300000032800000028000077 +:1072000001340000044606F084FB204670BD1020C7 +:1072100070BDF8B51C4615460E46074600F01FFA2D +:10722000002805D123462A4631463846FFF786FE18 +:10723000F8BDFFB583B01E4615000F460FD006F00F +:1072400064FB01A800900023F74A3946039806F032 +:10725000EBFC044606F05DFB002C03D014E010208C +:1072600007B0F0BD002E0CD006F04FFB00200090C0 +:107270002A8833463946039806F0D6FC044606F0C1 +:1072800048FB6846808828802046FEF7DCFCE7E75C +:10729000002906D0E54B0A885B899A4201D8E44868 +:1072A000704769E610B586B004236C46A382DF4BB5 +:1072B0005C898C4201D2914202D9DD4806B010BDF2 +:1072C0006C462182628200210091019119892180FE +:1072D0000221A17005A9029104A903916946FFF753 +:1072E0004BFEEBE7F0B591B00D4681206946087181 +:1072F00005F002FC0646002D08D02878CB4C01286A +:1073000006D0022828D0072011B0F0BD1020FBE7DE +:10731000A98801AAFEF7CAFC0028F5D1B00734D528 +:1073200068460079002820D1A879C0071DD006F052 +:10733000ECFA002000906A892989A088EB6806F0A1 +:10734000ECFA6946087106F0E4FA69460879002803 +:107350000BD0FEF778FCD7E7A98801AAFEF7A6FCB8 +:107360000028D1D1342006420FD001216846017295 +:10737000017301794173F00609D5A188684601823D +:10738000A18A01832069059004E00820BCE7A08859 +:1073900069460882FAF72CFC05461720694688835F +:1073A0000AAA2B46023207A902A805F077FF074672 +:1073B0006878000701D5FAF737FC002F03D038466C +:1073C000FEF7A9FCA0E7F00603D5207B06210843C1 +:1073D0002073B00602D50020FEF7C8FE08A8009072 +:1073E00069468B8B208804220121FEF77BF98BE70D +:1073F000F0B5002695B014460D4600290FD0022C9A +:107400004FD3A71EBAB288480AF02EF929191039AD +:10741000CA7B8B7B11021943884242D1BCB201A9BD +:10742000012006F06FFB7AE0029F3888010776D5CD +:10743000002D41D0A9190691CA788B78361D11020A +:10744000B6B219438919A1422BD869468A8906998F +:107450004B7809781B020B439A4222D1C00623D5F0 +:1074600006F053FA07A800900698AB19C178807807 +:107470000A0206990243487809780002084300216D +:1074800006F04BFA009006F044FA009800283ED12E +:107490000698C178827808026946898B1043884231 +:1074A00002D00B2015B0F0BD0698C1788278080292 +:1074B0001043801986B22EE0C0062CD5002007AA02 +:1074C00001461154401C80B21028FAD306F01DFA70 +:1074D00006A800906846002380891022194606F00D +:1074E000A3FB0090002803D006F013FA00980EE0EA +:1074F0000BA86946009088890A8B07AB002106F02B +:107500000CFA009006F005FA0098002803D0FEF768 +:107510009AFBC7E703E0388810218843388001A828 +:1075200006F0F8FA002800D17EE7404D698800296E +:1075300021D0012268460276027700244477018434 +:10754000172181850EAA234602320BA906A805F051 +:10755000A5FE002802D0FEF7DEFBA3E70CA80090F2 +:1075600069468B8D288804220121FEF7BBF800288C +:1075700098D16C8096E7002094E7F0B5002487B09E +:1075800015460E46002A04D002A9012006F0BAFAD8 +:1075900040E0102064E60398007800073AD506F032 +:1075A000B4F901A8009068460023008A1E4A1946D3 +:1075B00006F03AFB074606F0ACF9002F23D1002E67 +:1075C00023D068468088298820183719001D8142F9 +:1075D00036D36946098A3970090A797069468988FB +:1075E000B970090AF97006F090F901A8694600908F +:1075F000088A8A883B1D002106F016FB074606F024 +:1076000088F9002F01D003202AE6684680882018D8 +:10761000001D84B202A806F07DFA0028BBD08228A3 +:1076200008D0FEF710FB1BE6FFFF00004013002010 +:1076300002300000002E0ED02988A01C814201D209 +:107640000C200DE62246314639480AF00DF8311972 +:107650000870000A4870A41C2C80002000E600B5C9 +:1076600085B06946FEF797FC00280AD16846007C81 +:1076700003000BF02BFB08052F2F2F2F08080531D7 +:10768000032005B000BD68468078012807D1684610 +:1076900000880321C902401A1CD001281AD068466C +:1076A0008079012806D16846808815214902401A50 +:1076B00005280FD96846807A012811D168460189CA +:1076C00029200002081A05D0022803D0032801D07F +:1076D000042805D10F20D4E7164917480BF0F1F91B +:1076E0000020CEE738B5154A0021518003791AE011 +:1076F000CC002418A46800946C462488250707D57C +:10770000E50605D5D90008182038C08B508006E062 +:10771000640406D59171C9000818C08890800120C2 +:1077200038BD491CC9B28B42E2D8002038BD0000E8 +:10773000FFFF0000B8640000330200004013002087 +:10774000F8B50125F84902260E603F27F7493F02A8 +:107750008F60F7490022CA63CD63F649C96A0907F9 +:107760000ED4F4494031CB6AF34A53620B6B9362F7 +:107770004B6BD3628B6B1363C96BD3051943516396 +:10778000EE49EF4CC969002829D001282BD0FF20F1 +:10779000ECA16E300BF095F9EE48A063FF200430A9 +:1077A00060632563EC49032008602061E44996206A +:1077B00040314860DD48E94940304163E649FC39E1 +:1077C0000163E649091FC163E349F0398163D74882 +:1077D0004760E34910204860E2480660F8BDE2488F +:1077E0006061E24804E0E148E0306061DF48801F0A +:1077F0000143A161D0E70120D0494006C86170472C +:1078000010B5CE4C0020A070214660702031487029 +:1078100008746061A072A06209F02AFBA061204692 +:10782000343009F038FF002804D0FF20C5A13A30D9 +:107830000BF047F901204006E0610020FFF780FFD0 +:1078400010BDBE49012008707047BC490020087077 +:10785000704770477047BA4940310028086802D025 +:107860000122104301E0400840000860704770B5F5 +:107870000C46B24D01460622E81C0AF085FF6C72E8 +:1078800070BDAE48203040787047AC4A917050705F +:10789000704770B50D460446082904D9FF20A9A1F8 +:1078A000CB300BF00EF90022B14809E0910063588B +:1078B00009180B6053001B191B8C0B62521CD2B2AF +:1078C000AA42F3D3206BAA494031086070BD0B2354 +:1078D000DB4310B5C21A9A4998421FD008DC1C320B +:1078E00022D00A2A20D0142A1CD0182A08D117E046 +:1078F000083011D004280DD0082809D00C2805D054 +:10790000FF2090A1F7300BF0DCF810BD04200CE054 +:1079100000200AE0FC2008E0F82006E0F42004E063 +:10792000F02002E0EC2000E0D820C86010BD8348C1 +:107930002030007B704710B5814CC17861620AF03D +:1079400084FF0002E06110BD252808D0262808D059 +:10795000272808D041000A2807D8091D06E002217F +:1079600005E01A2103E0502101E0891DC9B2744AE3 +:107970009160734940314861704770494861704770 +:1079800070B56E4DA87200F028FBA87AC0073CD0F5 +:10799000714C2068800703D46AA176480BF091F8F7 +:1079A000A87A010619D5800707D5724865A1801C01 +:1079B0000BF087F8A87A00060FD55C4E2878403681 +:1079C000012811D0002804D0A3205EA180000BF074 +:1079D00078F869487061A8693061A87A800714D581 +:1079E0002068C00708D102E06348001FF2E7A52025 +:1079F00054A180000BF065F8A87A4007206801D5F3 +:107A0000042100E008210843206070BD70B5012406 +:107A10004A4D002807D0012818D002281AD055480E +:107A200048A145380BE000F0D8FA53482978001FE8 +:107A3000012907D0002907D04E4842A158380BF041 +:107A400040F870BD046070BD446070BD8120FFF7D8 +:107A500097FF70BD00F0C1FA6869002804D145485D +:107A600038A150380BF02DF86969A86A40184349CD +:107A7000C8602E484249403001623F490C314162A2 +:107A80002A49001548603F4884602C48203004741F +:107A900070BDF8B50C2069460870314C6068C006AE +:107AA000C50F1026A66034480021FC300161324B1E +:107AB00001221B1F1A610BE000BF00BF00BF00BF07 +:107AC00000BF00BF00BF00BF6B461A78521E1A707D +:107AD0006A461278002A02D00269002AECD00161BD +:107AE00068460078002804D1224816A131380AF0EF +:107AF000E8FF002D00D06660F8BD10490020C86185 +:107B0000704710B50AF0A1FE00020D49000AC863D3 +:107B100010BD054902200860704703490220086033 +:107B2000104908607047000080E100E000F5014066 +:107B3000C01F004080000010001700409C13002070 +:107B4000001500407372635C68616C5F7263732E32 +:107B5000630000005B06000000120040448000400B +:107B60000013004080E200E006010200250003004F +:107B7000001600407B0200000410004040850040D9 +:107B80004C81004000050040FB4902200860C9E725 +:107B9000FA490870C6E710B5F94809F084FD0028D5 +:107BA00004D02B20F74900010AF08BFF10BD10B55F +:107BB000F34809F090FD10BDF3494860B2E7F04981 +:107BC00010B53439F14B0022C8605A60896A081830 +:107BD000EF49486000F008FA10BDE94810B5C2212D +:107BE0003438C160E94A00215160806AE849C230F6 +:107BF000486000F0F9F910BDE64900208861C861CD +:107C0000DF493439C860E24948608BE7DC4900202D +:107C10003439886286E73F20DE49000240398860B7 +:107C200080E7D748DA493438806AFE30886079E7DF +:107C3000D7490020886075E7D74801681022914332 +:107C40000160D649012088616CE7D5490020C861F0 +:107C5000D148016810221143016063E700B5FFF7C6 +:107C6000EBFFC74900203439087400BD00B5FFF7A9 +:107C7000ECFFC34901203439087400BDC849CA6902 +:107C8000012A01D000204DE7BF4A403292685206D7 +:107C9000520E524202700020C861012042E7F8B53E +:107CA000BF4C2069012806D00021B548343800783F +:107CB000012802D004E04021F7E7E268012A04D05D +:107CC00000220A43012802D004E02022F9E761687B +:107CD000012905D000211143B24A002802D007E053 +:107CE0001021F8E71368012B02D1E368012B04D0BF +:107CF00000230B43002802D007E00823F9E71168AE +:107D0000002902D1E168012905D000221A439F4EC3 +:107D1000002802D004E00422F8E77168012904D0A9 +:107D200000211143002802D004E00221F9E7606835 +:107D3000012829D000259C480D4301680906090E39 +:107D400002D06169012900D000218D4F143F3973A1 +:107D500000680006000E02D0A069012800D00020B3 +:107D600078738B488068002803D000F0ABFA0128B4 +:107D700000D00020B8730021E16021616160616181 +:107D8000A16171602846F8BD0125D4E77C48012136 +:107D90001438C173C6E6F8B5794E0127143E307C1D +:107DA0000025002827D07C4C206800902560FFF734 +:107DB00070FE009820607A48C560056145604561A5 +:107DC000856174490015403988607848856030467F +:107DD000203801787148012909D0002909D0694962 +:107DE00073480AF06EFE0AF06BFF3574F8BD076049 +:107DF000F9E74760F7E7FFF752FF04460020F0730A +:107E0000634842685E4D343D6A620068A862297822 +:107E1000002909D1A978002906D05B4B5B681B7843 +:107E20000B406978994309D000213170E10707D0F0 +:107E3000104602F031FC0121A86A08E03770F5E72E +:107E4000A10601D5022102E0A10702D5002102F01E +:107E500030FC4D4F796806220931E81C0AF067FCB6 +:107E6000002807D1687A79680978C909884201D160 +:107E7000012000E000207070204600F0BBF83F4871 +:107E8000C2270078002815D0012828D002283BD02E +:107E900003285AD03B4947480AF013FE287C0028A3 +:107EA00004D02878002865D0FFF7C6FE287800287F +:107EB00061D08BE0A00701D501F001FC200703D5BC +:107EC0000120EF6001F034FC600703D50020EF6073 +:107ED00001F02EFCA006E1D501F09EFBDEE7A00735 +:107EE00001D503F08BFE200703D50120EF6003F0DE +:107EF00005FE600703D50020EF6003F0FFFDA0063C +:107F0000CCD503F087FDC9E7A00703D5BF20044007 +:107F100009F07EFB200705D5BF2004400120EF605B +:107F200009F075FB600705D5BF2004400020EF6015 +:107F300009F06DFBA00603D5BF20044009F066FBE5 +:107F40006006ABD509F065FBA8E7A00701D509F0ED +:107F500063FB200703D50120EF6009F05CFB60079D +:107F600003D50020EF6009F056FBA00696D509F076 +:107F700051FB93E720E022E000E100E05400002004 +:107F8000D0130020447B00000015004040810040D9 +:107F90004085004040F501400012004000100040C4 +:107FA0000011004000140040401600400005004051 +:107FB0006F0300009F040000FFF747FE76E7E868C4 +:107FC000002803D0A96A091826484160F07B0028E0 +:107FD00000D10BE70AF074FEF8BD234903200860C6 +:107FE0002249002008619DE520482149C1612149BD +:107FF000816197E570B50546FFF7EFFF1E4CA17A4A +:10800000080701D568071CD41C4AC80605D5507B53 +:10801000002802D0907B002813D0880602D5107863 +:1080200000280ED1480602D55078002809D000203B +:108030008A070026002A07DA4A0704D5012222709F +:1080400002E00120F4E72670CA0709D0AA0705D488 +:10805000890705D5002803D0A80601D4FFF719FD2C +:10806000A67270BD408500400012004040F50140FE +:1080700010100040448100409C130020BC130020DD +:108080002E48002101704170704770B506461446B5 +:108090000D46012000F072F828490120284B087095 +:1080A0009E60DC601D6170BDF8B50446012000F0E3 +:1080B00065F822490120087021494C6021490026B9 +:1080C0004E601121204D8902A960204F002C0AD05A +:1080D000012C03D01EA140200AF0F3FC3E601120C9 +:1080E00080026860F8BD386001208002F9E710B5B1 +:1080F0001248017800290ED01121134A890291609B +:1081000010494A680021002A03D0154A12684270BB +:1081100000E041700170002000F030F810BD074809 +:108120000178002907D007484068002802D00C4891 +:108130000068C0B2704740787047000055000020CA +:1081400000F5004000F1004000F5014000F2004061 +:108150007372635C68616C5F63636D2E6300000023 +:1081600000F4004001202949C0030860284900208C +:1081700008701120274980028860704770B5244D2F +:1081800004462878A04207D0002C05D0002803D050 +:1081900021A14D200AF095FC2878A04210D00020A3 +:1081A00022492C70002C23D01A4A214D214B8032B9 +:1081B000012C06D0022C13D017A16A200AF081FCF2 +:1081C00070BD0860022008604D6112481A494030B5 +:1081D00001624362081D10601648001D506070BDAA +:1081E0000860032008604D6114481060536070BD42 +:1081F00008600860112007498002886070BD10B5D2 +:1082000005A173200AF05DFC10BD000080E100E0D4 +:108210005700002000F501407372635C68616C5F79 +:1082200063636D5F6161722E6300000000F50040C2 +:10823000D413002000F000400011004048810040AD +:10824000364800210170417010218170704770B56F +:10825000064614460D460220FFF790FF01202F49E5 +:108260002F4A0870E41E14619660556070BD10B509 +:108270000220FFF783FF29490120087029480021C7 +:1082800001604160816028490014486010BD10B54C +:10829000224C2078002811D00120234980038860D7 +:1082A00000F02EF80021002804D0012060701F4843 +:1082B000006801E061701020A07021700020FFF7BD +:1082C0005DFF10BD10B515480178002905D000F0FC +:1082D00017F8002800D0012010BD407810BD10B55F +:1082E0000E480178002909D000F00AF8002803D0D0 +:1082F0000E480068C0B210BD102010BD807810BDBF +:1083000008480168002905D04168002902D080682A +:10831000002801D00020704701207047580000203D +:1083200000F5004000F1004000F5014000F400407D +:1083300010B528210AF085FA10BD40788006800E1D +:10834000704740788006800EC01C70472820704718 +:1083500070B5054600780A0700090001120F1043A6 +:1083600028700B000AF0B2FC070507050705090590 +:108370000B00062408E00C2406E0222404E000247C +:10838000FEA158200AF09DFB6878800980012043F7 +:10839000687070BD00780007000F704710B50622A6 +:1083A000C01C0AF0F1F910BD0B4610B5C11C062225 +:1083B00018460AF0E9F910BD10B5062209300AF096 +:1083C000E3F910BD0B46014610B5062209311846E7 +:1083D0000AF0DAF910BD0278BF23C9071A40490E26 +:1083E0000A430270704700784006C00F7047027859 +:1083F0005206520EC9010A43027070470078C00944 +:10840000704770B50C460546C11C2046062209304F +:108410000AF0BAF920784006400E20702978490603 +:10842000C90FC9010843207070BD70B515460E46CE +:1084300004461F2A03D9D1A1A9200AF042FB2046F5 +:108440002A46314609300AF09FF96078AD1D80094F +:108450008001A906890E0843607070BD70B505469D +:1084600040780E468406A40E062C03D2C3A1B92080 +:108470000AF027FBA41FE4B21F2C00D91F242946B1 +:108480002246093130460AF07FF9204670BD70B5AA +:1084900015460E4604461F2A03D9B8A1CD200AF07E +:1084A00010FB20462A46314609300AF06DF9607803 +:1084B000AD1D80098001A906890E0843607070BD5A +:1084C00070B5044640780E468506AD0E062D03D2E3 +:1084D000AAA1DE200AF0F5FAAD1FEDB21F2D03D9D7 +:1084E000A6A1E2200AF0EDFA21462A4609313046DB +:1084F0000AF04AF9284670BD10B504220F300AF080 +:1085000043F910BD0B46014610B504220F31184641 +:108510000AF03AF910BD10B5032213300AF034F90D +:1085200010BD0B46014610B50322133118460AF060 +:108530002BF910BD4176090A81767047817E427E13 +:10854000080210437047C176090A01777047017F1E +:10855000C27E0802104370474177090A817770474D +:10856000817F427F080210437047C175090A017676 +:108570007047017EC27D08021043704781757047C5 +:10858000807D704720300279C90652095201C90E18 +:108590000A430271704720300079C006C00E704750 +:1085A00020300279D206D20E49010A430271704787 +:1085B000203000794009704710B505221F300AF0BD +:1085C000E3F810BD0B46014610B505221F311846D1 +:1085D0000AF0DAF810BD30B5411C837E0A46190254 +:1085E000D37D447E927D1B0221431343674D827DE0 +:1085F0008C1FAC4210D8002A0ED0082A0CD88A4210 +:108600000AD28B4208D8817F427F08021043A91DFD +:10861000884201D8012030BD002030BD00210A462B +:108620004254491C2229FBDB70474078C006C00E2B +:1086300070474078C006C00EC01C704722207047AB +:1086400010B502788B07920892009B0F1A430270B4 +:108650004278520952014270012908D0022906D0FD +:10866000032905D0FF2045A1A3300AF02AFA10BD46 +:1086700001210A43427010BD10B502788B079208A1 +:1086800092009B0F1A4302704278520952014270C5 +:10869000012908D0022906D0032905D0FF2037A1DF +:1086A000BD300AF00EFA10BD01210A43427010BD20 +:1086B00000788007800F70470278FB23C9071A40B3 +:1086C000490F0A430270704700784007C00F704797 +:1086D0000278F723C9071A40090F0A43027070474E +:1086E00000780007C00F70470278EF23C9071A40CF +:1086F000C90E0A43027070470078C006C00F704769 +:1087000070B50546C1700B000AF0E0FA0E080A0CBD +:108710000E1012120C14141212160C180C2413E062 +:10872000082411E002240FE017240DE00D240BE0D3 +:10873000012409E0092407E0062405E0452000247F +:108740000EA1C0000AF0BDF968784009400120433D +:10875000687070BDC078704770B5044640780E46AA +:10876000C506ED0E1B2D03D904A109480AF0A9F98D +:108770006019C01C042231460CE000007372635C77 +:10878000756C5F7064752E63000000007A0C000049 +:108790003A02000009F0F8FF70BD70B50446407859 +:1087A0000E46C506ED0E1B2D03D9A049A0480AF0C0 +:1087B00088F96119C91C0422304609F0E5FF70BD33 +:1087C000C171090A01727047017AC2790802104327 +:1087D00070474172090A81727047817A427A0802B1 +:1087E00010437047C172090A01737047017BC27A56 +:1087F0000802104370474171090A817170478179FD +:108800004279080210437047017170470079704740 +:108810004173090A81737047817B427B08021043D0 +:10882000704730B5411C037A0A46C47919022143C6 +:10883000537914791B0223437E4D00798C1FAC427F +:1088400010D800280ED008280CD888420AD28B42B3 +:1088500008D8D07A917A00020843A91D884201D82D +:10886000012030BD002030BD10B50522001D09F0EB +:108870008BFF10BD0B4610B5011D0522184609F0EF +:1088800083FF10BD4172090A81727047817A427A72 +:10889000080210437047017170470079704710B5A6 +:1088A0000822001D09F070FF10BD0B4610B5011D18 +:1088B0000822184609F068FF10BD0A78027349784B +:1088C00041737047027B0A70407B4870704710B557 +:1088D00008220E3009F058FF10BD0B46014610B5B6 +:1088E00008220E31184609F04FFF10BD10B50422C2 +:1088F000163009F049FF10BD0B46014610B50422A1 +:108900001631184609F040FF10BD10B50822001DB1 +:1089100009F03AFF10BD0B4610B5011D082218469C +:1089200009F032FF10BD10B504220C3009F02CFF05 +:1089300010BD0B46014610B504220C31184609F053 +:1089400023FF10BD017170474171090A81717047A1 +:10895000C171090A017270470079704781794279C3 +:10896000080210437047017AC27908021043704729 +:108970000171704700797047017170470079704745 +:1089800010B50822001D09F0FFFE10BD0B4610B502 +:10899000011D0822184609F0F7FE10BD10B5082287 +:1089A000001D09F0F1FE10BD0B4610B5011D082297 +:1089B000184609F0E9FE10BD70B515460E4604468E +:1089C0001B2A04D93720194900010AF07AF82A46EF +:1089D0003146E01C09F0D8FE6078E9064009400104 +:1089E000C90E0843607070BD70B5054640780E46EC +:1089F000C406E40E1B2C04D9DF200C4980000AF0C9 +:108A000060F82246E91C304609F0BEFE204670BDE3 +:108A10004078C006C00E1B2801D8012070470020F6 +:108A2000704710B5222209F0AFFE10BD7C87000010 +:108A3000430200007A0C0000FEB50F4601460646D0 +:108A40000546C031203640350446032F04D0002FA0 +:108A50002BD0012F29D049E000206080A080E08049 +:108A600020816081A082E082E873A074E074A07627 +:108A7000E076A073E0732074607430740123AB73EC +:108A80006882E88208762146A883603108702883CE +:108A90002873687320776077B072B0730872487279 +:108AA00088720A7488746883FEBD00206882E88238 +:108AB000012F50D0E08B0090608C0190C000009995 +:108AC00009F0DCFE401C80B2A882009919224143C3 +:108AD0009202914201DD401EA8827D200002009991 +:108AE00009F0CCFE401CE883002F01D0022FDBD11F +:108AF000307AC006C00E30720020E872221824219D +:108B00008B5C4032D9075B08DE07C90FF60F71187E +:108B10005B08DE07F60F71185B08DE07F60F7118A9 +:108B20005B08DE07F60F71185B08DE07F60F711899 +:108B30005B08DE07F60F71185B0859189171EA7A25 +:108B4000401C5118C0B2E9720528D7D3002FABD111 +:108B500000202874FEBD4A7F2046E030022A12D051 +:108B6000097F022913D050A1722009F0AAFF012029 +:108B700000900190E08B698B4843009909F08CFECE +:108B8000688301989AE7818800910089F1E7018A5A +:108B90000091808AEDE770B504464034E67A0546D8 +:108BA000002E68D0252E66D8002964D03C20405D78 +:108BB000227B48431018252109F060FE08462173E6 +:108BC0004207C908520F3C4B691820319A5C097959 +:108BD0008A4367D0314609F051FE491CCAB20020D1 +:108BE00006E0002804D0291840314979511ACAB248 +:108BF000291846235B5C93423AD320310979C94353 +:108C0000CB07DB17D21A521E1206120E34D08B0776 +:108C1000DB17D21A521E1206120E2FD04B07DB178B +:108C2000D21A521E1206120E2BD00B07DB17D21AC5 +:108C3000521E1206120E27D0CB06DB17D21A521E76 +:108C40001206120E23D08B06DB17D21A521E120602 +:108C5000120E1FD04B06DB17D21A521E1206120E2E +:108C60001BD00906C917511A491E0A06120E17D041 +:108C7000401C0528B5DB70BDC00013E0C000401CDF +:108C800010E0C000801C0DE0C000C01C0AE0C00065 +:108C9000001D07E0C000401D04E0C000801D01E091 +:108CA000C000C01D607370BD7372635C6C6C5F75D7 +:108CB00074696C2E63000000042D010010B5FF489C +:108CC0000021017041708170C17041718171C17169 +:108CD000083008F0E0FC002804D0FF20F8A1843020 +:108CE00009F0EFFE10BD10B5F44900204872081DD0 +:108CF00008F0D1FC002804D0FF20F1A1C33009F016 +:108D0000E0FEFFF7DBFFF148FFF788FC0021EF48AA +:108D1000FFF7EAFC0121ED48FFF792FC10BDE2E706 +:108D20001B207047E5494A7A002A01D0002070478D +:108D3000488101204872704710B5E0494A7A002AFC +:108D400002D04989814201D0002010BDDB48001DBE +:108D500008F0A9FC002804D0FF20D9A1B43009F004 +:108D6000B0FED648001D08F0B6FCFFF7A7FF0120B3 +:108D700010BD70B5D14C0025627A002A02D06289FC +:108D8000824201D00D700DE0227863789A4203D3BD +:108D900022786378D21A04E062782378D21A1023FA +:108DA0009A1A0A70FFF7C8FF002801D065720120E7 +:108DB00070BDC2494A7A002A04D04989814201D152 +:108DC0000120704700207047BC490A784B78521C3C +:108DD0001207120F9A4207D0097822225143BC4A47 +:108DE000891801600120704700207047B34801785E +:108DF0004278491C0907090F914206D00178491CA5 +:108E00000907090F01700120704700207047AB4926 +:108E10004A7A002A04D04989814201D10120704751 +:108E200000207047A5490A784B789A4207D04978C4 +:108E300022225143A64A8918016001207047002070 +:108E4000704710B59D4C20786178884216D06078C4 +:108E5000401C0007000F6070201D08F024FC002853 +:108E600004D0E078401CE070012010BDA078401CC8 +:108E7000A0709248001D08F02EFCF5E7002010BD00 +:108E80008E4801784078814201D10120704700204E +:108E900070478A4801784278914202D3017840783D +:108EA00003E041780078081A1021081AC0B2704710 +:108EB0000F20704770B5814C0D46617A002916D09D +:108EC0006189814213D100262E70201D08F0EBFB32 +:108ED000002805D1A0782870A670201D08F0FBFBA3 +:108EE0002878E17840182870E670012070BD0020D5 +:108EF00070BD76490160704770494A7A002A04D0F3 +:108F00004989814201D101207047002070476B4997 +:108F10004979002901D0002070476E490160012085 +:108F2000704766484179002901D00020704701212F +:108F300041710846704761494A7A002A04D049893C +:108F4000814201D101207047002070475B49497977 +:108F5000012901D0002070475E490160012070475F +:108F600056484179012901D0002070470021417104 +:108F70000120704751484079012801D001207047F5 +:108F8000002070474D494A7A002A04D0498981421D +:108F900001D1012070470020704770B5474C05464D +:108FA000A0790721401C09F069FCE079814208D0D2 +:108FB000A0792221484347492231401828600120E6 +:108FC00070BD002070BD10B53C4C0721A079401C3D +:108FD00009F054FCE079814207D0A0790721401CB8 +:108FE00009F04CFCA171012010BD002010BD3348D8 +:108FF0008179C079814201D10120704700207047FA +:109000002E494A7A002A04D04989814201D101209F +:1090100070470020704710B504462848083008F013 +:1090200042FB002815D125498879CA7990420CD095 +:10903000C8792221484327492231401820601F481F +:10904000083008F048FB012010BD1C48083008F02B +:1090500042FB002010BD10B504461848083008F047 +:1090600022FB002815D115498879CA7990420CD085 +:10907000C8792221484317492231401820600F48FF +:10908000083008F028FB012010BD0C48083008F01B +:1090900022FB002010BD094810B5083008F003FB82 +:1090A000002822D1054CA079E17988421AD0E079D4 +:1090B0000721401C09F0E2FBE1710DE05C0000209B +:1090C0007372635C646D5F712E6300002F17002064 +:1090D000FF1300201F1600202046083008F0FBFA7E +:1090E000012010BD0C4808F0F6FA002010BD0A4817 +:1090F00008388179C079814201D101207047002070 +:109100007047054808388179C079814201D1012032 +:1091100070470020704700006400002070477047CF +:10912000FF2070477047704700207047002070474D +:1091300000207047002070470020704700207047D3 +:1091400000207047002070470020704701207047C2 +:1091500000207047002070470020704700207047B3 +:10916000F8B5FA4D0446A87F002600280CD0002947 +:1091700023D1667010202070E87FA0702846203030 +:109180000078E070AE7718E0287A012801D000203E +:10919000F8BD002911D16670EC49687A01270A31BF +:1091A000002801D0132000E0052020701422A01C0C +:1091B00009F0EAFAA7716E722E720120F8BDF8B5B7 +:1091C000E3480078002802D00C273846F8BD002775 +:1091D000DE4D3C46203DAF74EF742F7528466F730B +:1091E0002038DA4E47737771687D002804D0FEF787 +:1091F0001FFDFFF74CF86C7534727472B477D34866 +:109200002430FFF795F8D1484C30FFF791F8D0485B +:109210004470DAE710B5CE4C00232370CB4C203CD1 +:109220006375CA4B01241C71603B583307C3FFF7B9 +:10923000C6FF002803D0C7A1FF2009F042FC10BDE3 +:10924000C2482038807C7047F8B5C04D0646407B48 +:10925000203DE873BD4837791346AF73B27B827106 +:109260000446603C217006221946601C09F08CFA05 +:10927000B07960730622F11DE01D09F085FA687B64 +:109280000126002800D0EE74B0484038407B00280A +:1092900000D02E75002F09D0012F09D0022F24D025 +:1092A000032F43D0FF20ABA14B3013E000211DE082 +:1092B000A64801212430FFF74BF8A448E11D2430D3 +:1092C000FFF77AF8607B002807D0012807D0FF203D +:1092D000A0A1413009F0F5FB0CE0002100E00121E4 +:1092E0009A482430FFF783F804E006219748243099 +:1092F000FFF72EF89548611C2430FFF74FF893488C +:1093000021782430FFF767F8904804214C30FFF7AC +:109310001FF88E48611C4C30FFF740F88B482178CD +:109320004C30FFF758F8AE740020F8BD0221DDE79D +:1093300070B50446854D0020203D287528462246FC +:10934000323809F021FA2846203844730120287564 +:1093500070BD7E490871704710B57C4C0022203CDE +:10936000E274607302462046123809F00DFA0120BB +:10937000E07410BDF8B500F02DFB744C0025203CC6 +:10938000607D002804D0FEF753FCFEF780FF657572 +:109390006F4E3570FEF70BFCA07B012804D0002136 +:1093A000084601F02DF9F8BD0021022001F028F94E +:1093B000664C207A0127002809D0A07F0028F2D12E +:1093C0000520E077204620300570A777F8BD70783B +:1093D0000028FBD05D4906226039487BE073C91D37 +:1093E0000846693009F0D0F93C20A07227727570E8 +:1093F000F8BD10B5554C203CE17B207CCA0701D05C +:10940000C2070BD08A070FD582070DD42620FEF79E +:109410009BFA207C02210843207410BD2520FEF712 +:1094200093FA207C0121F6E74907F6D54007F4D4EA +:109430002720FEF789FA207C0421ECE770B5444828 +:109440000078002861D1414C203CA07C00285CD0F1 +:10945000FEF7A1FB0026267466743046FEF798FBE3 +:109460000020FEF76DF93F48FEF765FA2546403DBE +:10947000296E8857FEF72BFA3A48C01EFEF741FBCB +:10948000FEF7BAFBFFF7B5FFFEF7DBF9FEF77CFB53 +:109490000120FEF7BBFA0F210520FEF7F6F9297827 +:1094A000681CFEF7E4F9A07B01280AD0E07C0028C4 +:1094B00007D0214612390846627B5630FEF7B5FFC9 +:1094C000E674207D002808D0204840380146427BC1 +:1094D00012398C30FEF7DBFF2675E86D0178002924 +:1094E00003D00178001DFEF7D4F9A86D017800299A +:1094F00007D00178154A401C7732FEF7A8FE0120FC +:109500006075FEF754FB002070BD0C2070BD104943 +:109510004860704770B50546FEF76EFB002D06D01B +:109520000020FEF72DFAFEF78CF9FFF762FF074CDB +:10953000203C607C002819D0A07B012803D105A124 +:10954000094809F0BEFAFFF715FF70BDB4170020F7 +:10955000680000207372635C6C6C5F6164762E63DC +:10956000000000000F2D0100CF0300000126002D98 +:1095700004D00220FEF74AFAFE484671FD48243026 +:10958000FEF71AFB012008F03CF8FEF762F9A07B19 +:1095900000280ED001280CD002280AD003280AD0B7 +:1095A000F549F64809F08DFAE07B217C884306D026 +:1095B00009E0032000E00120FEF7E2F9F4E7A07BD8 +:1095C000012803D06674EE480670BEE700202074C0 +:1095D000F9E710B5FEF7DFFAE948007800280ED168 +:1095E000E4482038807C002809D00020FFF792FF53 +:1095F000F6F7F9FEDF480079012806D007E000F011 +:10960000E9F9FEF7D4FA0C2010BD09F059FB00204F +:1096100010BDDB494870704770B500F0AFFE002800 +:1096200019D0FF202D30FEF7A8F9D54E3078D14C57 +:10963000012813D0022801D003282ED0CE49D148CA +:1096400009F03FFA3078002807D0F6F7CCFE2079F1 +:1096500001282CD030E0FFF78DFE76E7C54D203D88 +:10966000A87B032819D0FEF7B8FA687D002803D03C +:10967000FEF7FDFDFEF7D5FABE487430FEF79CFA02 +:10968000012007F0BFFFA87B01280BD0A1796F2034 +:10969000012906D0032904D004E00120FFF73AFF96 +:1096A000D0E77F20FEF76CF902203070CAE76079BE +:1096B000002801D1FEF76AFB0020607145E770B514 +:1096C000AC4C203C607D002803D0FEF7B1FAFEF7D9 +:1096D000DEFD00F053FE00281CD0A94D287802289A +:1096E00004D0A848A4492B3009F0EBF9A07B01284D +:1096F00013D0FF202D30FEF740F90120FFF70AFFBD +:109700002878002808D0F6F76EFE9A4C20790128B8 +:1097100006D00AE0FFF72EFE17E799208000EAE75F +:109720006079002801D1FEF731FB002060710CE761 +:10973000F8B50446FEF7FBF80546FEF7C3FD012821 +:1097400000D0002000908E480078022804D08D4878 +:109750008949673009F0B5F9864E203E707D0028B2 +:1097600003D0FEF765FAFEF792FDFEF745FA814851 +:109770007430FEF70FFE21007E4C07464DD0FEF7F9 +:1097800080F80028FAD03B0009F0A0FA06474747C6 +:1097900004471D47B07B0128F0D00098054304D151 +:1097A000A079002801D0022837D172484C30FEF74A +:1097B00003FA012007F025FF0120FEF7E1F87048C9 +:1097C00003210170F5E06B4F74373846D438F978CF +:1097D000C27991421BD13979027A914217D17979B4 +:1097E000427A914213D1B979827A91420FD1F979B3 +:1097F000C27A91420BD1397A027B914207D13978F2 +:10980000407B4906C90F814201D1012100E00021BE +:10981000B07B012802D0002803D0C3E0002908D182 +:10982000C0E00098054304D1A079002801D00128A8 +:109830007ED150487430FEF7CEFE002878D0504DCF +:109840004C49686804228331323008F09DFF387833 +:109850003E214006C20F68680A540622F91C3F30B8 +:1098600008F092FF4349686803228731363008F0D8 +:109870008BFF6868BA7D39210A543E4974310A7EEB +:10988000CB7D12021A4342878A7E4B7E12021A4314 +:10989000C2830A7FCB7E110219430184354974319A +:1098A0008A7F4B7F1102194341843249052293314B +:1098B000243008F069FF2F486D68943001792F46F5 +:1098C000C906C90E20373977007940097877207AA0 +:1098D000002810D0A07F002858D1607A002801D03D +:1098E000132000E005202349E07700202031087094 +:1098F0000120A0774AE01F48717D1030002925D053 +:109900000021A172A989A181B97FE17329460622AC +:109910003F3108F039FFE88BE082288C2083688C87 +:109920006083787F2077607F00994008400000E0E6 +:1099300038E008436077FEF7D2FC617F4000C9073A +:10994000C90F01436177012060721EE00021A172FE +:10995000A989A181B97FE173294606223F3108F028 +:1099600013FFE88BE082288C2083688C6083787FEB +:10997000207709E0B417002054950000ED030000A3 +:10998000680000206B02000001202072194D0020A9 +:10999000287000F01FF8FEF70AF90120696800F04E +:1099A0002FFE06E0FF202D30FDF7E7FF0120FFF737 +:1099B000B1FD1048007800280BD0F6F714FD20798F +:1099C000012804D16079002801D1FEF7DFF90020D9 +:1099D0006071F8BD10B5FEF719F9FEF70DF9FEF745 +:1099E00058F80020FDF7CCFFFEF715F9FEF795F8C3 +:1099F00010BD0000680000208107C90E002808DAA9 +:109A00000007000F08388008F94A80008018C069F4 +:109A100004E08008F74A800080180068C84000060B +:109A2000800F7047F448C07D7047F44800780028E4 +:109A300001D00020704701207047F048007870473F +:109A400010B5EE4A1378EC4CA47DA34202D007F087 +:109A500059F910BD1078032803D1E8490120891D68 +:109A6000887000F04AFE10BD38B5E44DE24CAD1DE3 +:109A7000687801281ED00121684606F041F8684642 +:109A80000078DF49000208F0F9FE68684118606854 +:109A900007F08FF86060DB48A060A18A00200029F1 +:109AA00010D06070032121702073A07ED249FFF78F +:109AB000C7FF38BD7D21C900606807F07AF8606093 +:109AC000D148E9E70121A18202216170EAE7FFB5EF +:109AD000C94C85B01C3461680191A1680391C749E4 +:109AE0001E46891E4A6807995388C91A89B202918D +:109AF000002E04D025463C3521464C3102E0BE4DB7 +:109B0000114664310091BC4F03213C372970002875 +:109B100018D0BA49891E4968403101287ED00228F0 +:109B20005CD003287BD0B9A1BC4808F0CAFF2878D4 +:109B3000002E75D0032804D0B848B4A1093008F02D +:109B4000C0FF35E1A068002804D1B448AFA1663851 +:109B500008F0B7FFA948B149801E40686031408FC6 +:109B600048434018069900F0CEFDE061A348AB4998 +:109B7000801E40686031C08B4843069900F0C3FDE9 +:109B80009E492062891E4B68A44A598FA0686032A2 +:109B9000514386464118E069A04A091A4C3A89188F +:109BA0008C462033E1629D4A597E60325143411810 +:109BB0000818FF3016306062A06261467046081ACD +:109BC000FF38974935388842B1D29649884204D245 +:109BD00092488EA1593808F074FFD0E0508F8F4A18 +:109BE0002169603250430818069900F08CFDE0614D +:109BF00082488A49801E40686031C08B484306997C +:109C000000F081FD2062A068002804D183487FA174 +:109C1000513808F056FF7948801E02E02FE05EE0E0 +:109C2000C1E040685621095A7F4B0029418F2269C3 +:109C30001DD059435118E269891AE1626269E168ED +:109C4000794B5143E26989183922125C5A438A18C8 +:109C50005118FF3114316162C08B216A5843411A97 +:109C600072480818A062A168E06A401A81E059436E +:109C70005118E269891A6268D3398918DDE7C88A00 +:109C8000002802D0A068002804D164485FA13938B8 +:109C900008F017FF59486449801E4068C28B4A4348 +:109CA000216A8E46511AE1628C4656226369125A25 +:109CB000E168D21A5943E3692030CB187146514309 +:109CC000407E594A5918504308184018FF30143044 +:109CD0006062564861466044A062A06848E0D08B4C +:109CE000514A5043226A801A029A5043E062C88A5D +:109CF000002805D0002E19D0B87D002816D0A1E08C +:109D0000002E02D0B87D0028F6D10198002802D09C +:109D10000398002804D141483CA1213808F0D1FE25 +:109D20000198E16AD3380818E06207E0019800283A +:109D300004D08D2035A1C00008F0C3FE2F48801E3E +:109D400042685620815A02980818216A4843400008 +:109D5000FF3014306062D08B334A5043411A33488D +:109D60000818A0622448C07D00280BD0E16A03983F +:109D7000081AFF382A492338884200D3D7E6022040 +:109D80002870D4E606F072FC01461B48006907F013 +:109D9000C7FBE16A081AFF3821491E388842EDD214 +:109DA000012009B0F0BD032802D1144907204870F2 +:109DB0001148E16A006906F0FCFE6860A16A606A09 +:109DC000884202D90098016001E00099086000987B +:109DD000174900680818A8600848801E40688188F4 +:109DE0000798081A00B2002824DD022023E00000B2 +:109DF00000ED00E000E400E05018002072000020B8 +:109E000010270000F82A0000B78913007372635C02 +:109E10006C6C5F6C6D2E73302E630000820400004A +:109E20004707000082020000E204000061FCFFFF1F +:109E3000EF160000002068702E73002E04D0B87D4D +:109E4000002801D00220ACE701204640BE76F7484A +:109E5000807E2946FFF7F4FD0020A2E7F8B5F3481D +:109E60003C30807EF14FF24D3C461C3400280CD033 +:109E70006968208F4988884207D17878002804D102 +:109E8000A920EC49C00008F01CFE06F0EFFB0146DB +:109E9000386907F045FB00F044FC6968228F4B8865 +:109EA0001E18B24202DB521C228702E0401C181826 +:109EB0002087208F0A89904201D1401C2087B88AD0 +:109EC000032802D2401CB88201E0208F8880084617 +:109ED0004030828A408A4988101A401E401886B253 +:109EE00017E028786B6841002033D3485B7F415AE4 +:109EF0005B00C05A081881B2207E0023FFF7E7FDFF +:109F0000002811D0012810D00B20CA49C00108F048 +:109F1000D8FD228FB01A00B20028E2DA6868082162 +:109F20002030417400F0A7FDF8BD208F401C208731 +:109F3000EFE770B5BD4C00261C3466600120A660BA +:109F400000F0C9FBBA481F21801C41700078B74D52 +:109F5000030008F0BBFE044545033745B3482670AF +:109F60003C30807EB24E002806D106F07FFB216C8B +:109F700007F0D6FA002811DC7068228F41888A42E7 +:109F800004D10289511A4181428003E0511A418172 +:109F9000218F41806868206428610BE0A18E706881 +:109FA0004288891A4181A18E4180216C69602961B2 +:109FB000E16C4166706801F0FFFB00280DD09D49FF +:109FC0009E4808E068682861FFF738FA002804D046 +:109FD0009A489849401D08F074FDF6F704FA70BDE0 +:109FE000964894490C30F6E7F8B505468F4A0120AB +:109FF0003C3290758D4C17466576213F00260B004C +:10A0000008F064FE09061D2E4E2B69691C64690068 +:10A0100020768748801C0078022807D0384607F051 +:10A0200042FB002803D1A07EA84200D12676207EE4 +:10A03000002803D1FFF77DFF00F0A0FBF8BD207ED4 +:10A04000002806D006F064FA6676384607F043FB2F +:10A0500001E000F075FB2676F8BDFDF79CFEF8BD2B +:10A060007348801C017802290ED0A17E0078A94295 +:10A070000DD0002804D0FF206E497B3008F021FD70 +:10A08000284606F0D8FAF8BDFFF7E8FEF8BD032829 +:10A0900003D0FF206749813015E0FFF7E5FCF8BDEC +:10A0A000A07EA84204D0FF206249873008F009FD55 +:10A0B0005F48801C01780229E6D000780328ECD0A4 +:10A0C000FF205C498E3008F0FCFCE6E7284606F0ED +:10A0D000B2FA6676F8BDFF2056499D3008F0F1FCD3 +:10A0E000F8BD524988755248801C00E020BF0278B4 +:10A0F0008B7D9A42FAD00078002803D000200022FD +:10A100008A7570470120FAE710B500280BD00128A6 +:10A1100005D04A484749853808F0D3FC09E00320B8 +:10A12000FFF7DFFF01E000F049FB002801D000202D +:10A1300010BD0C2010BDF8B5FF273D4D1F24D037B2 +:10A14000AD1C2E78330008F0C1FD040811030C117A +:10A150000220FFF7C6FF002801D000240FE00C24E6 +:10A160000AE00120FFF7D0FF044603E031493846FA +:10A1700008F0A7FC002C02D02878B042E1D1287862 +:10A18000002804D0FF202B49D53008F09AFC27493D +:10A1900000201C3108761C39887501226A70244A17 +:10A1A00008325070C87508612046F8BD70B5044685 +:10A1B0000120FFF721FCC5B20B20FFF71DFCC0B248 +:10A1C000854204D0FF201B49A73008F07AFC01200B +:10A1D000FFF712FCC5B21820FFF70EFCC0B2854293 +:10A1E00004D0FF201349A83008F06BFC0420C043C2 +:10A1F000FFF702FCC5B21920FFF7FEFBC0B2854293 +:10A2000004D0FF200B49A93008F05BFC08484470DB +:10A2100006481B3007F03FFA05490020891C0870EA +:10A2200002498875FFF787FF70BD000050180020B5 +:10A23000700000200C9E0000142D0100220300007D +:10A24000F74840787047F649891E08707047F3B5A3 +:10A2500081B006F0E9F9F349884200D20846FF30A0 +:10A260009930EF4D87B22878002801D00C20FEBD30 +:10A27000ED4806F08CF9ED4CA076E9490320087012 +:10A2800000268D1DAE70A07E002804D19720E849DD +:10A29000800008F016FC0298012827D0E5490198B3 +:10A2A00048436860012028700146684605F028FC94 +:10A2B00068460078E049000208F0E0FA0D4606F032 +:10A2C000D5F9791906F075FC6060DC48A0600320C0 +:10A2D0002070022060702673A07ED449FFF7B0FB87 +:10A2E000CF48A682072141700020FEBD06F0BEF9CE +:10A2F000394606F05EFC6060D148A0602E700120F7 +:10A300006870E4E7704770B5C5490A78002A01D043 +:10A310000C2089E702220A70C14CC44DA41E1C35D2 +:10A320006060287E002804D0C248C1494E3008F041 +:10A33000C8FB207800234100C248425A616820319E +:10A34000497F4900405A101881B21A461846FFF753 +:10A35000BEFB002804D0B748B549503008F0B1FB27 +:10A36000002068610121E8602976B049888262682E +:10A370005188491E51802887A88655E770B5A8489E +:10A380000124801D4078A94D002813D028461C3098 +:10A390008168AD48814202D8AA7D032A00D10024F9 +:10A3A000814207D9A87D032801D0012000E00020C8 +:10A3B000FFF72FF9A87D032800D10024204633E7BA +:10A3C0009A481C300178491C0170026B81689142E7 +:10A3D00004D8007E012801D001207047002070477A +:10A3E0000020704770B5914C1C34207E032849D161 +:10A3F0000021204620308175894DAD1E68684030AF +:10A40000007C00283ED106F031F988490A690146EE +:10A41000104607F085F8002834DD00F082F96968FD +:10A42000401C4A888018A0860889A28E904229D9AB +:10A430004888088140318A8A498A511A491E081879 +:10A4400086B21AE0287841007E48425A6968203175 +:10A45000497F4900405A1018A28E81B2207E012304 +:10A46000FFF735FB00280DD001280CD0022809D0B9 +:10A470006C486F49C43808F024FBA08E301A00B233 +:10A480000028DFDAD0E6A08E401CA086F5E7F8B5FC +:10A49000664C634F00251C34BF1E012819D00720CD +:10A4A000B91C487006F034F8604E304675761B30A3 +:10A4B00007F011F97878F8F7A5F8B5827868314691 +:10A4C0004088208701203C318875002000F003F986 +:10A4D000F8BD267E52495B48891E0A7853004A68B7 +:10A4E00011462031032E18D0267E022E21D0267E42 +:10A4F000012ED7D1497FC35A4900405A12891818F2 +:10A5000081B200230120FFF7E2FA0028CAD04548B3 +:10A510004749213808F0D5FAC4E76561E560497F0D +:10A52000C35A4900405A1289181881B200230320E7 +:10A53000E9E75626B65A6661497FC35A4900405A30 +:10A540001289181881B200230220FFF7C0FA0121F6 +:10A550002176DAE7F8B5324E0021B61D7078334C1B +:10A560000D46002801D075701AE03078002809D017 +:10A570000121684605F0C4FA684600782E490002B9 +:10A5800008F07CF970684118606806F012FB6060A2 +:10A59000257302206070607E2449FFF751FAA5827E +:10A5A00005F0B6FF214865761B3007F094F81C488B +:10A5B000801E4078F8F726F8002000F08CF8F8BDEF +:10A5C00010B5030008F082FB060A0E0406130916F4 +:10A5D000012000E0002000F037F910BD0120FFF756 +:10A5E00056FF10BD114903201C31087610BD00F044 +:10A5F0003DF910BD0B480E498E3008F062FA10BDCF +:10A6000070B50A4D002821D0054EB61D012828D06E +:10A61000022837D003480649AD3008F052FA03E665 +:10A6200072000020F6050000E99F0000501800208D +:10A630000C9E00007102000010270000F82A0000A4 +:10A64000B7891300142D01002E841300FFF782FF39 +:10A65000A97D9448002901D01F2100E00721417005 +:10A66000E2E5002490487470047600F046F8032078 +:10A67000F7F7C7F805F04CFF8B486C76401E07F0E3 +:10A680002AF8D1E5FFF766FF0120B07000F035F839 +:10A690000420F7F7B6F8C7E582490978022907D1FF +:10A6A00081490A78002A03D148600A6B10180863B0 +:10A6B000704710B57C4A00290BD0012906D0022929 +:10A6C00006D07A497A4808F0FCF910BD401E00E037 +:10A6D000401F906010BD744910B51C39C875002822 +:10A6E00005D0F5F781FE0220F5F778FE10BDF5F7ED +:10A6F0007CFE0120F5F77AFE10BD6A48002101704A +:10A7000001214170704710B504460020002907D090 +:10A71000684808F0B3F80146204608F0AFF8401C3E +:10A7200010BD10B500280AD05E49634A891E4968E9 +:10A73000C98B51435C4A126A891A08F09FF810BD10 +:10A7400010B558480078030008F0C0FA0414140348 +:10A750000A1401F035F900280BD05449574806E097 +:10A76000FEF737FF002804D054485049001D08F078 +:10A77000A8F910BD51484D490B30F8E710B505F068 +:10A7800053FF4849891E4968CA8B4B494A43464989 +:10A790000B6AD21AD33AFF2332330A63984202D2A9 +:10A7A0004748101802E0101A464A801808634648C5 +:10A7B0000A6B824200D81046086310BDF0B53A4CCF +:10A7C000032685B01C3CA67520461B30009001E096 +:10A7D00020BF009806F067FF0028F9D10025A57575 +:10A7E00030480178032903D0007800281DD021E0EB +:10A7F000A07E002803D12D49344808F062F9A77ED5 +:10A80000684606710221417105F030FF0290FF2079 +:10A81000F5300390012168460174A57601A93846F8 +:10A8200006F070FAFFF769FF0CE01E48801D817882 +:10A83000012906D00024009806F04DFF204605B0FF +:10A84000F0BD85700124F6E710B5002803D0002084 +:10A85000FFF71DFE04E01348801E4078F7F7D2FE94 +:10A86000FFF74BFF0020F6F7CCFF10BD10B50E4AE6 +:10A87000114B106AD0600B48801E4068C18B594351 +:10A8800011610146E0314B8843870C7839231C5411 +:10A890008B88C383CB880384098941840220107686 +:10A8A00010BD0000720000206C1800200C9E0000FB +:10A8B000C306000040420F00E20400004303000012 +:10A8C000A5F8FFFFD6F9FFFF1612000029020000CD +:10A8D000F8B5FEF7DEFA0646FEF74CFBF94D0746E3 +:10A8E0006879F94C002809D0012823D0022826D005 +:10A8F00003282ED0FF20F5A1BC3033E0F2481430FD +:10A90000FEF724FB002801D003200FE0EE481430AE +:10A91000FEF788FA002804D020696030007A002809 +:10A9200006D0E9481430FEF7E4FA012068711BE014 +:10A930000220FBE7E4481430FEF7DBFA14E0E248BB +:10A940001430FEF76FFA00280ED1FF20DFA1AE30E1 +:10A9500008E0DD481430FEF7F9FA002804D1FF20A2 +:10A96000DAA1B63008F0ADF86169F7220878104036 +:10A970000870AA79D207120F1043FB22104008700A +:10A98000EA79D207520F104308706B79EF22022B3D +:10A9900004D0012B07D0032B07D00CE0012E06D8E2 +:10A9A000002F04D007E07F1E3E43002E03D010404E +:10A9B0001022104300E010400870287C002811D0BD +:10A9C000687901280ED0BF484A38FDF7F5F8BD492F +:10A9D00020694A3978306269FDF757FB0020FDF79E +:10A9E00063FB04E00846FDF7E7F8FDF780FB6069CC +:10A9F0000078C00606D4A0690078C00602D4E079C9 +:10AA0000002802D0A079002801D0012000E0032016 +:10AA1000FCF7B6FF0320207001202071F8BDAA4882 +:10AA200010B51830FEF7B9FAA74C002802D0002064 +:10AA3000607004E001206070A2484A38A061A1481B +:10AA4000407C002802D06078002805D0A069FDF77E +:10AA5000B3F8FDF74CFB10BD9A484A38FDF7ACF847 +:10AA6000984A20694A3AA030A169FDF70EFB0120FF +:10AA7000FDF71AFB10BD10B5934900220869302379 +:10AA80008276C27601221A544030007C002803D01E +:10AA90000A700021022001E000210320FFF790FD51 +:10AAA00010BD70B5884C6079C20620460169084621 +:10AAB0004030002A01DA002202E0C28A4B89D21813 +:10AAC0000B46C282C0331A7E002A03D0428B4D89C6 +:10AAD00052194283627A002A03D03D2001F0A3F884 +:10AAE00052E08A7E032A4FD0227A002A13D05007E0 +:10AAF00001D4D00601D51E2036E0100701D53D2037 +:10AB000032E0D00705D1900703D470A1734807F055 +:10AB1000D8FF2A2028E060310978002905D0818BF0 +:10AB20004A1C8283C28B91420FD2597F062902D0E0 +:10AB3000197F062905D1018B4A1C0283C28B9142E1 +:10AB400003D2428B818A8A4201D322200CE0827B8D +:10AB5000408A002A0FD006280FD35A48C07B01280C +:10AB600001D03E2000E0082001F05DF82069807EE1 +:10AB7000032809D001E08842F5D20120207000218D +:10AB80000846FFF71DFD70BDFFF775FF70BD10B5DE +:10AB90004C494D48CA7B002A2BD0012A29D0022AD1 +:10ABA00027D0032A04D049A14D4807F08AFF10BDE1 +:10ABB000897B02290FD007291BD00069014640314B +:10ABC0008A8A498A511A891E89B2032900D303212E +:10ABD000028951180BE00069014640314A8A032A74 +:10ABE00001D2018903E04288898A5118491C818079 +:10ABF00010BD0069F5E700B5030008F067F806042A +:10AC0000070B0F12121700290ED00FE0491E022960 +:10AC10000AD90BE0491F012906D907E0072903D00B +:10AC200004E00A390C2901D8012000BD002000BD34 +:10AC3000FEB5054624481430FEF769F9002804D112 +:10AC40003D2022A1400107F03CFF1F4C6069FDF749 +:10AC5000E5FC03216069FDF70FFD6069EF220178D3 +:10AC6000114001702946FDF74BFD002601272B00FE +:10AC700008F02CF80E5D5D085D1D6161155D4D5D90 +:10AC8000613D385D20697121095C002901D00621F0 +:10AC900001E0C030417E6069FDF7FDFD4BE0A06939 +:10ACA000FDF758FD01466069FDF766FE43E0216946 +:10ACB0006069D031FDF729FE216960699531FDF7A2 +:10ACC00032FE38E006190020800000207372635CB9 +:10ACD0006C6C5F736C6176652E630000610200002E +:10ACE0006F08000006216069FDF742FE23E0E0687E +:10ACF00001786069FDF726FEE06881886069FDF7EC +:10AD000023FEE06841886069FDF722FE13E00096AB +:10AD1000019620696030007C002803D069460878DD +:10AD20003843087069466069FDF738FE03E0FA4968 +:10AD3000FA4807F0C6FEFEF7F4F8002804D1F748F9 +:10AD4000F549801D07F0BDFE0C2D07D0072D04D05E +:10AD500020695C210E5260300770FEBD20694030D2 +:10AD60000683FEBDF0B5EE4CDC2021698DB0405C61 +:10AD7000042809D0052834D16031487A002829D028 +:10AD800001204874022026E01022EA31684600F0D3 +:10AD90007AFF21691022C83104A800F074FF6846C8 +:10ADA00005F007F8216908AA6CCA0F46CB67783707 +:10ADB0008A670846FE608030BD60074620376CC752 +:10ADC0000023036343630120A0310876D54948740A +:10ADD000052000E00D20FFF72BFF21690020C03186 +:10ADE00008770DB0F0BDF8B5CD481430FEF78FF8F8 +:10ADF000002842D0CA4C207A00283ED12069002584 +:10AE0000C030007EC74E00280BD0B17B0120FFF779 +:10AE1000F2FE002805D1B17B0420FFF7ECFE0028EC +:10AE200006D020690127C030407F062807D00CE0FB +:10AE300020695A210D526030457402202FE0B17B09 +:10AE40000420FFF7D8FE002810D0B07B030007F0E5 +:10AE50003DFF173F3F3F3F1E3F3F3F3D3F203F3FAE +:10AE60003F292C3F3F3F3F3F3F2F3F0020696A2152 +:10AE7000095CC90702D0C0304577F8BD0C20FFF748 +:10AE8000D7FE20696030817A39438172F8BD07208E +:10AE900005E0FEF7ACF80028F8D075740B20FFF73A +:10AEA000C7FEF8BD00F0FEFEF8BDFFF75BFFF8BD82 +:10AEB0002069002180308160C160057437740620EC +:10AEC000FFF7B6FE206960300570F8BD0920E6E79F +:10AED00000F0B2FEF8BD70B5924DA87B072831D1C5 +:10AEE0008F4CDE2220694188125A491C914229D197 +:10AEF000217A002926D10146E0318B88C28B93420A +:10AF000007D1CA88068CB24203D10A89468CB24264 +:10AF10000AD0844A8689283A9680D380CB881381C8 +:10AF2000098951810121117001221146FDF784FD2B +:10AF300000210420FFF744FB21690020C03148773D +:10AF4000A873E87370BD70B5764CA07B162803D04B +:10AF50007149754807F0B5FD7148002102697148D3 +:10AF60006032117211702838067C0B250123002EE7 +:10AF700006D0027B002A12D14573817303730EE061 +:10AF8000567A002E06D051722288828281740C2259 +:10AF9000027404E022888282817483750574A1732F +:10AFA00070BDF8B55E4DA879800723D5287A0028B2 +:10AFB00020D15C4C0120A17BFFF71DFE002819D198 +:10AFC00068690026C0780127030007F07FFE0E594C +:10AFD0005908592E3B4F0A591459205245590220FD +:10AFE00021E0A07B042804D04F484B49333807F0B8 +:10AFF00068FDA673F8BDA07B082804D04A484649DE +:10B000002D3807F05EFD286960300670F1E7A07BFF +:10B010000A2804D015204049800107F052FD286914 +:10B02000603007720B20A073F8BDA07B0E2804D0FF +:10B030003D4839491F3807F044FD286960300772E0 +:10B040000F20F0E7A07B0F2804D03748324918388A +:10B0500007F037FD1120E6E7A07B0F2804D0324827 +:10B060002D49123807F02DFD1320DCE7FFF76BFFA9 +:10B07000F8BD2869C030417F0629F9D14677F8BD6F +:10B0800029482549813007F01CFDF8BD10B5254C35 +:10B090000020A17BFFF7AFFD002804D1204801224A +:10B0A000017A114301720420A07310BD10B51C4C2D +:10B0B000DD212069095C002903D0217A0122114396 +:10B0C00021726030807A800715D4A069FDF744FCB6 +:10B0D00021696031C872A069FDF740FC21696031C7 +:10B0E0008881A069FDF73FFC216902226031C88197 +:10B0F000887A10438872206900220146C0310B7F94 +:10B10000062B13D06A231B5CDB0703D106234B7786 +:10B110004030028310BD0000CCAC0000E40700000A +:10B120008000002006190020660500000A77F1E77C +:10B13000F8B5FE48817B0020FFF75DFDFC4C012641 +:10B14000002807D120696030407A002802D1207A97 +:10B1500030432072216900255C204552602046540E +:10B16000C831A069FDF7B9FB2169A0699131FDF7EC +:10B17000C3FB2169042208469131B93007F004FB72 +:10B18000EA482838017C0827002906D0017B0029DD +:10B1900012D14773857306730EE0216905468989CC +:10B1A0004182E249A0691439FDF77FFBDF49A069BC +:10B1B0000C39FDF787FB2F74DC480E218173F8BD35 +:10B1C00070B5DA4D0020A97BFFF715FDD84C00289B +:10B1D00003D1207A012108432072A069FDF721FBE9 +:10B1E00000280ED0A069FDF717FB2169DE2250521E +:10B1F000498800F0A2FD002806D0282000F013FDA9 +:10B2000070BDFFF743FF70BDA069FDF7FFFA21692C +:10B21000E0310870A069FDF7F2FA2169E031488059 +:10B22000A069FDF7D1FA2169E0318880A069FDF7B6 +:10B23000D4FA2169E031C880A069FDF7D7FA216905 +:10B24000E03108810720A87370BDF8B5B84CA0792B +:10B25000C0076ED0207A00286BD1B44D0120A97BA5 +:10B26000FFF7C9FC002853D1A0690027C17802224A +:10B2700001260B0007F02AFD0D161308354A4A383F +:10B280004C474A1929444A00FDF707FB2169DA2295 +:10B290005054AE735C20475260310E7038E000F0BD +:10B2A00057FD35E0FFF78CFF32E0A97B0020FFF768 +:10B2B000A2FC002802D1207A3043207220695C2150 +:10B2C0000F52603006700A2018E0A87B0B2802D0CD +:10B2D000207A104320722F742069603046720C204F +:10B2E0000CE0FFF725FF13E0A87B112802D0207A9D +:10B2F000104320722069603007701620A87307E0A1 +:10B30000FFF7D4FE04E000F0F0FC01E0FFF7BEFE22 +:10B31000FDF759FE002803D18649874807F0D1FB85 +:10B32000206900238030016B426B491C5A41426303 +:10B330000163F8BDF8B57D4F787C002802D1387CD8 +:10B34000002801D0FCF7D3FEFCF760FCFCF754FCAE +:10B350000020FCF715FBFCF79CFBFCF75CFCFCF702 +:10B36000DCFBFCF724FCF87B01260025704C002850 +:10B370000FD16079C10705D00220F87320694030F1 +:10B38000857302E0800717D5FE7300210120FFF7C7 +:10B3900017F9F87B012802D0022808D00CE0607968 +:10B3A000C00709D00220F8732069403085736079A6 +:10B3B000000701D50320F87300F0EEFCFFF713FD42 +:10B3C0002079002801D03D8102E03889401C388175 +:10B3D0006079C007206904D072210D544030458245 +:10B3E00003E04030418A491C4182E079002806D0C0 +:10B3F00021696031887C022806D8401C8874206945 +:10B400006030807C022804D93D817D8120696030D4 +:10B410008574B97B0020FFF7EEFB002802D1B87BD2 +:10B4200006284BD120690146C0310A7F062A45D043 +:10B43000497F062942D03D49C97B03293ED160306E +:10B44000807C00283AD1FDF71BFD002836D0FDF79F +:10B4500091FD002832D02169C88801282ED90A46DA +:10B460004032D673908A578A831E9F4201DB0120A7 +:10B4700002E0C01B401E80B22C4B0F8C1B89BB42CC +:10B4800001D3012302E0FB1A5B1C9BB2984200D956 +:10B490001846012800D1D5732A22525C002A11D007 +:10B4A000224A898D52898A4201D3012102E0891AF8 +:10B4B000491C89B2884205D9084603E02169012068 +:10B4C0004031CD7321694A8810180881FFF75FFB6E +:10B4D0002069122215490C3007F056F9FFF7E1FAFE +:10B4E000FEF77EFF002808D010482838817F002909 +:10B4F00003D121698989018486770D481830FDF7C9 +:10B50000AAFD00280FD0A06900788007800F0128CD +:10B5100009D0022807D0FDF7BEFD002803D1054958 +:10B52000064807F0CEFA2069403009E006190020ED +:10B5300080000020CCAC0000DF040000720300009B +:10B540000574F8BD70B5FE4C607900283DD0FD4D06 +:10B55000022811D1FDF775FC002804D17320FA49A7 +:10B56000000107F0AEFA2A69002380329068D168A2 +:10B57000401C5941D16090600026667120790128F5 +:10B5800004D12671A87910210843A871E078012818 +:10B5900016D1E670A87908210843A871FDF7E0FCF0 +:10B5A000002804D1E920E849C00007F08AFA296997 +:10B5B000002380318A68C868521C58418A60C8607C +:10B5C000A079012802D00120A07170BDA67170BDC4 +:10B5D000F8B5DC4CDA4DA269002710780421830706 +:10B5E0009B0FE8790126012B11D0022B0FD0032BE2 +:10B5F00001D0207A2FE06178002905D1AE70A179C1 +:10B600003143A17122E0EF71F8BDEE71F8BD5278BF +:10B61000D3061BD060780028F8D1D006C00E1B28B6 +:10B6200017D8607908436071FDF7CDFC002803D17D +:10B63000C549C64807F045FA206900238030026BEF +:10B64000416B521C594102634163E8790128DCD106 +:10B65000D9E7207A102108432072F8BD70B5B84DA3 +:10B660000446283D287B002600280AD0002976D1F0 +:10B67000667010202070687BA070A87BE0702E732D +:10B680006DE02878002810D0002968D16670072066 +:10B69000207005E02E700A22A91CA01C07F074F887 +:10B6A00028780028F6D1A67059E0287C002839D0E7 +:10B6B000002954D1297CA3480B0007F007FB0D2E6D +:10B6C0002E2E2E2E2E2E2E112E2E22082E0066709D +:10B6D0000C212170A97CA17000698089A0801AE0EA +:10B6E00008216670217000690A468089944960804B +:10B6F0001439201D07F048F891484A38C08FA081BE +:10B7000009E066700B212170A97CA1700069808915 +:10B71000A080A87DA0712E7421E08B498C4807F091 +:10B72000D0F91CE0AA7F86480838002A08D00029F2 +:10B7300015D166701121217000886080AE770EE00F +:10B740007F4A083A9378002B0BD0002907D1667006 +:10B750001221217081886180C088A08096700120AC +:10B7600070BD002070BD77480078012801D00C2002 +:10B770007047734900202839087008730874887767 +:10B78000704770B56F4C064620780D46002804D0EF +:10B790006F486D493F3007F094F90120E660E07290 +:10B7A000E5612070FFF7DFFF002804D09320664991 +:10B7B000000107F086F970BDF8B5624C21780129C7 +:10B7C00002D12178012901D00C20F8BD014605469F +:10B7D000206112220C315A4806F0D6FF012740356D +:10B7E0002F74574D2888FDF712FB002827D0288892 +:10B7F000FDF7C8FB002822D02888FDF77DFB002834 +:10B800001DD02888FDF797FB002818D0FCF7C3F956 +:10B8100020690026C088002824D04A481430FDF74B +:10B8200076FB00281ED02069C030007E002819D089 +:10B83000A97B0120FFF7DFF9002802D012E01220D7 +:10B84000F8BDA97B0420FFF7D6F900280AD12169A9 +:10B850005A20465260314E740220FFF7E9F9206900 +:10B860004030C67320694189491E8AB229898918E6 +:10B870002981297B002902D06E812E7302E069891B +:10B8800089186981014640314B8A9B184B82C388D5 +:10B89000012B01D85B1CC380002A01D072221654F0 +:10B8A000AA7B032A16D0C97B002915D02989008CD0 +:10B8B000814211D2FDF7E4FA00280DD020692A2137 +:10B8C000095C00290BD06989808D814207D3A6705D +:10B8D000E7700CE0A7700AE0A670E67007E06889E0 +:10B8E0000021401C6881A7700520FEF769FE2069D1 +:10B8F0004F210E54A178002930D12030807A0028C1 +:10B9000000D06E810120FBF71BFF20693630FCF769 +:10B91000F8F820693230FCF70EF8E169002008568B +:10B92000FBF7D5FF0120FCF733F9FBF78EFFFCF79F +:10B930002BF90120FCF76AF82069406E0AE000004C +:10B940000619002080000020CCAC00007B0700001E +:10B95000E7080000FCF733F9FFF761F8A87B05283A +:10B9600001D0062816D12069DE224188125A891A90 +:10B9700009B200290EDB01460522E0312430F4F73C +:10B9800023FC012202212069FDF756F82069C0300E +:10B990004677AE7320694189FDF7FDF82069403094 +:10B9A000407BFBF7D1FF6671E671A6712672A67225 +:10B9B0006672267102202070FCF7F9F80020F8BDAD +:10B9C00010B5FE4C2078022801D00C2010BDFCF7E9 +:10B9D000E2F8A078002802D0FFF7ACFC15E000F0F8 +:10B9E0001AF920692030807B012809D0FCF736F94C +:10B9F000FBF730FFF4F7F7FCE07A012803D004E00E +:10BA0000FCF734F9F4E707F05BF9002010BDEB49CF +:10BA1000C872704710B5E94C2078032803D0E84974 +:10BA2000E84807F04EF8E84801218278002A06D05D +:10BA3000002282700171A27904231A43A271626903 +:10BA40001378DB439B0707D1C378002B04D1C17067 +:10BA5000A07902210843A0711078C00606D4A0691D +:10BA60000078C00602D4E07900280CD06078002865 +:10BA700009D1A079002806D1FEF7A2FC002802D047 +:10BA8000207A002802D0FFF755FC03E0FEF7C7FF3D +:10BA900000F0C1F82078012806D0F4F7A4FCE07A81 +:10BAA000012801D1FCF772F910BD38B5C34C2069EB +:10BAB0002030807B012820D1A07A00281DD1684643 +:10BAC000FCF7DCF8002818D021692F20405C012801 +:10BAD00010D1BD4A0D236D460020D356285683420F +:10BAE00008D050738989283A918411462031887191 +:10BAF00001208870A07A401CA07238BD70B5AF4C90 +:10BB000006462078042804D0AE48AD49553006F0EA +:10BB1000D8FF607910210843AB4D6071002E47D0EB +:10BB2000FCF7FDFA61780126084300280ED1687CF5 +:10BB300000280BD0A0694178C90607D00078E979C0 +:10BB40000007C00F884201D1667247E0E078002804 +:10BB500009D0A0694178C90605D10078C00602D491 +:10BB6000FFF7A3FF3AE0FFF7A0FFA069A9790078EB +:10BB70004007C00F884205D0FFF7E4FC6079082138 +:10BB800008436071A069E97900780007C00F884216 +:10BB900001D1FFF71DFD6079304360710020E07135 +:10BBA000A079000702D5A87B022817D0207A13E0DD +:10BBB000022108436071E079401CC0B2E0710128A5 +:10BBC0000CD8687C00280CD07F484A384078C106E1 +:10BBD000C90E052905D2C006002802D0FFF7AAFB2E +:10BBE00001E0FEF775FE2078012806D0F4F7FBFB94 +:10BBF000E07A012801D1FCF7C9F870BD10B56F4893 +:10BC00000078042804D06F486D49B73006F059FF1A +:10BC1000FFF790FB10BD10B50720FBF7B1FE674999 +:10BC20000420087010BD6549312209695054664AE4 +:10BC3000032090738876704710B5604C2069C0303F +:10BC4000007F00281ED06048817B0020FEF7D3FFD4 +:10BC5000002817D02069DC21095C0B0007F036F8BA +:10BC6000071212121212120512006030807AC007F9 +:10BC700008D10C20FEF7DCFF206901226030817AB8 +:10BC80001143817210BD10B5002A0AD0002306E0CE +:10BC9000D41A6418203CE47FC4545B1CDBB293428A +:10BCA000F6D310BD10B503F02AFF0C281CD3434C6B +:10BCB00008212069D03003F023FF002806D0206936 +:10BCC0000421953003F01CFF002803D13C493F4874 +:10BCD00006F0F7FE2169042208469531BD3006F0D2 +:10BCE00053FD0420FEF7A4FF10BD7CB5364E0020A6 +:10BCF000B17BFEF780FF0125304C002802D1207A6D +:10BD0000284320726946A069FCF74EFE6846007819 +:10BD10000021C207D20F684602702069002A02D0B3 +:10BD20006030057401E06030017420695C221152BA +:10BD3000603005700820B0737CBD401A244900B201 +:10BD4000884201DC002801DC012070470020704798 +:10BD500070B51D4D0020A97BFEF74DFF174C002844 +:10BD600003D1207A012108432072A069FCF78EFDDF +:10BD70002169DE2250524988FFF7DFFF002803D0F7 +:10BD80002820FFF750FF70BD2169A069E031FCF762 +:10BD900071FD0520A87370BD70B500F054F8074C14 +:10BDA000094D6079400716D5A97B0520FEF723FFD2 +:10BDB000002810D0207A082108430BE080000020E2 +:10BDC000CCAC00001D0A000006190020640600002B +:10BDD000FE7F00002072FFF738FA00F012F8FFF73C +:10BDE000E0F8A079C00609D5A87B030006F06EFF35 +:10BDF00006060606060604060620A873FFF76BF87B +:10BE000070BD10B525488179490714D5017A0029FC +:10BE100011D12349897B0B0006F058FF080D050D51 +:10BE20000D0D0E0D100D0069002260210A54C03066 +:10BE3000807EFFF7F8FE10BD012100E002210069BD +:10BE4000C030417710BD10B51448817909071DD560 +:10BE5000017A00291AD1124A947B230006F036FF9A +:10BE60001416160B1616161616161616161616167F +:10BE7000161616161716006960300170407C0028EF +:10BE800001D0062000E01620FFF7CDFE10BD0069AE +:10BE9000603001720170917310BD000080000020BD +:10BEA0000619002010B5031D03600020521E04E097 +:10BEB0005C181C60401C2346C0B29042F8DB002096 +:10BEC000186010BD01460A680020002A02D0104602 +:10BED00012680A60704702680A60016070470000DB +:10BEE00000B51A2822D00ADC030006F0EFFE0D117F +:10BEF0001F131F1F191915171F1F1F1B1F002A288B +:10BF000014DD3A38030006F0E1FE030F11091100B9 +:10BF1000002000BD1E4800BD042000BD0D2000BD56 +:10BF20000F2000BD082000BD112000BD032000BD72 +:10BF300010B50C46F5F7C8FB00281AD02046F4F7D8 +:10BF400061FE002812D020780E280BD00F2809D0CF +:10BF5000022807D0032805D00EA1772006F0B1FDF6 +:10BF6000002010BDA078FFF7BBFF10BD09A17D2008 +:10BF7000F4E708A18320F1E710B5F4F7CBFD10BD7D +:10BF800010B5F4F73FFE10BD10B5F4F721FE10BD5B +:10BF9000013000007372635C686F73745F6863697B +:10BFA0002E630000F0B597B00021032004F0F7F8ED +:10BFB0000025FE4E022775807574347C12E0F0680F +:10BFC000E1004018818800290CD0858069460F70F7 +:10BFD0004D7001680291808869468880002168461A +:10BFE000F8F7F0FD2046641EE4B20028E7D117B050 +:10BFF000F0BDEE4BD86019741A80D3E7EB49EC4BD7 +:10C000004A8800201A4200D00120497C002901D032 +:10C01000082108437047F7B504460E460078012111 +:10C02000E34A8140521C114098B0E04A0091518887 +:10C03000E04B994205D0009B002B05D0DC4B194208 +:10C0400002D001201BB0F0BD009BD84A194351809B +:10C050001A9D002D11D00020287022781A980027F0 +:10C06000401C130006F032FE10EF0D152137555D10 +:10C070006A39AFAB85B3EEEDECEF0B28EDD00420C1 +:10C08000E0E702212970A1880170090A41700320AC +:10C0900093E004212970A1880170090A4170E188A8 +:10C0A0008170090AC170052087E006212970A188E6 +:10C0B0000170090A4170E1888170090AC170218903 +:10C0C0000171090A4171A289E81D216906F05CFB32 +:10C0D000A089C01D71E0082129702178082901D1AB +:10C0E00010212970A1880170090A4170E1888170CE +:10C0F000090AC1700520308020466A1D01A9083058 +:10C1000003F047FB00287DD1694630880979401843 +:10C1100053E00A212970A1880170090A41700320A7 +:10C120000AE00C212970A1880170090A4170E18898 +:10C130008170090AC170052030809DE0A088844686 +:10C140004000401C81B2308888425BD3052959D316 +:10C150000E202870002008E0A36842009B5A521964 +:10C1600053701B0A401C937080B26045F4D3318039 +:10C17000B6E08E49487C002873D0401E4874C868D9 +:10C1800021790822C9004518A9882868401808386C +:10C19000A16806F0F9FA0221684601710021417197 +:10C1A00028680390A98868460181002101A8F8F752 +:10C1B00009FD0020A880002E00D0308090E0297872 +:10C1C000802211432970297840221143297029784F +:10C1D0008909890112312970A1880170090A417009 +:10C1E000E288E81CA16806F0CFFAE088C01C308025 +:10C1F0002878410640D5C00972D0012168460171F6 +:10C20000002100E02BE041713188ED1C091D018106 +:10C210001A980390E08840190490001D634D059022 +:10C22000297C68460176002101A8F8F7CBFC074677 +:10C2300030880C303080022F06D0002F50D060E0C4 +:10C240003CE032E01CE059E06946097EE868CA003B +:10C2500080182A7C914202D28188002902D00427CA +:10C260004FE02EE0697C491C69741A99016031889D +:10C2700081800020308044E04C48A188C1802FE0BC +:10C2800029788909890116312970A1880170090A64 +:10C290004170E1888170090AC1702289681DE168D6 +:10C2A00006F072FA2089401D46E72878800980014F +:10C2B000183028702079687002207EE73B480A0415 +:10C2C00001D405271DE00289A3889A4201D00627E0 +:10C2D00017E01E222A70012249043280490C418055 +:10C2E000009800280DD0314D002228881146830087 +:10C2F000032003F0B2FE2078287107E00020308090 +:10C3000003272A48009942888A434280384699E6A2 +:10C31000F7B59AB002000C4606D0172A04D8234875 +:10C32000244B4088984202D107201DB0F0BD2378ED +:10C330005D0601D4DB0901D00820F6E700236D4635 +:10C340002B706B701D462378611C9F06931E1893FB +:10C35000531E19939BB2169302AB1793134BBF0E48 +:10C36000DE883B0006F0B2FC208511F15EF16BF136 +:10C37000A3F1C6F1F2F1FBF1EEF1EDF1ECF1F1F127 +:10C38000EBF1EAF1E9F1E8F185F1052A71D1042236 +:10C3900069460A7005490A7969460A71E178A37805 +:10C3A0000A021A436946CA80227905E0181900205A +:10C3B000FE710000FFFF00004A7061788906890E57 +:10C3C0000C2923D009DC891E0B0006F07FFC091321 +:10C3D00052155219521B521D520012291CD004DC56 +:10C3E0000E2915D01029D1D114E0162916D01829FC +:10C3F000CCD115E0800700E04007002839DA2AE1B7 +:10C400000007FAE7C006F8E78006F6E74006F4E71B +:10C410000006F2E7C005F0E7C004EEE78004ECE7B1 +:10C420004004EAE7800724D5032AAFD105206A46F5 +:10C430001070487809780002084390800BE14007AB +:10C44000F1D5062A15D31898617880B2012902D057 +:10C4500002299BD101E0022700E01027062269464D +:10C460000A7000228A8001AEA11C0236BA1C179203 +:10C4700018E0B6E04A780B7812021A433280801E28 +:10C48000891C1890B21C1691384603F05CF9169975 +:10C4900018986B469A88C919C01BB61D521C9A8001 +:10C4A000179A80B28242E5D900289CD1D3E00007D8 +:10C4B000B9D51998694682B2072008700020888093 +:10C4C000601C891D11E0437806781B0233430B8002 +:10C4D000C37886781B0233434B806E46121FB388A5 +:10C4E000001D091D5B1C92B2B380042AEBD2002A06 +:10C4F00077D1B0E0C00674D5022A72D3189808210B +:10C5000082B2684601700021C18063780371A01C6B +:10C5100017990EE04678077836023E430E80861C57 +:10C520004E606F46D21AFE88C0180831761C92B24F +:10C53000FE809342EED9DAE76FE076E065E051E005 +:10C5400046E01EE014E00AE000E0A0E0800648D5E6 +:10C5500009206A46107096801698D0800FE0400639 +:10C560003FD50A22684602708680169AC28006E08D +:10C57000000636D50B206A461070169890800291FE +:10C5800069E0C0052DD5022A7FD318980C2182B20C +:10C59000684601700021C18063780371A01C17995F +:10C5A00013E04678077836023E430E80C6788778D7 +:10C5B00036023E434E80061D4E606F46D21AFE88FC +:10C5C000C0180831761C92B2FE809342E9D98EE7FA +:10C5D000C0045AD5012A58D10D21684601708680C1 +:10C5E00039E052E0800450D5052A4ED30E23684628 +:10C5F00003708680C8788B78010219436846C18031 +:10C60000521F0281601D039025E040043DD5012AA0 +:10C610003BD10F20694608701DE0030435D44B78E8 +:10C620000E781B023343244E3381032A2DD31B2F54 +:10C6300027D011236E46337001261F4BF60330437B +:10C64000588048780B780102194368468180D21ED1 +:10C65000C280E01C029020788006800E1B280AD041 +:10C660001D2808D00021032003F099FD12484188BD +:10C67000C90BC903418068461C99F8F7A3FA2846FC +:10C6800053E610206B461870DBE70725F7E708250F +:10C69000F5E700B50022D243074997B04A80032846 +:10C6A00007D1032268460270097901710021F8F769 +:10C6B00089FA17B000BD000018190020FFB589B035 +:10C6C0000020019009981027FE4C1E4615460828A8 +:10C6D00006D0E06901F05EF8002809D03770BEE0AE +:10C6E000288809213843108013980227017016E02A +:10C6F000E169012088710521E269C9029180E1693F +:10C700008872E169F0480881E1690020887328880F +:10C7100020210843288011211398042701701398C1 +:10C720000225801C0290307806900A203070E5487F +:10C730001830049001F00DFA0020059020462C30AE +:10C7400003906DE00998102808D1022D06D00199B8 +:10C750000298A28D401A8270110AC170E08D0A9968 +:10C76000884202D901F0D5F806E0884204D1069843 +:10C77000002801D030701CE00298E18D0170090A98 +:10C78000417012980088401BC01B82B2FF20C01B62 +:10C79000904200D2024607A8009002980021C319D7 +:10C7A000E08D01F041FA3070002805D0C0B2832836 +:10C7B00058D0E08D20833EE00598002804D0206CFE +:10C7C00000790A282CD336E06846808BC119C9B29B +:10C7D0000191022D0DD01399019A4978914202D10D +:10C7E000228F824208D00191206C0178032908D061 +:10C7F00023E0084613994870206C0178042906D07C +:10C8000007E000790A2818D20120059008E0E18DA0 +:10C81000818002990198081802900198281885B221 +:10C820000399049801F098F9002804D1129800881F +:10C83000401BB84286DA022D0DD00998102806D187 +:10C8400002990198A28D081A8270110AC17012987B +:10C85000058000203070206C0078032802D0002072 +:10C860000DB0F0BD0220FBE7F8B5964A0026126D28 +:10C87000002A2ED0401F934D84B24035E88A2346CB +:10C880000833AF8AC318BB4222D88B784F781B027B +:10C8900010183B4303701B0A43700B79CF781A02C0 +:10C8A0003A438270120AC2700471220A427122460F +:10C8B000491D801D05F068FFE88AA41D001980B29B +:10C8C0008049E882096D002208180270427000E079 +:10C8D00009263046F8BD30B57A4B028840339B8A32 +:10C8E000934213D9774B1C6DA3185C781D782402F2 +:10C8F0002C430BD05C791D7924022C436404640C16 +:10C90000A41D1219028000200B6030BD822030BDB2 +:10C91000F0B585B0074600266846068155E00198C7 +:10C92000417802780D0215434179027908021043DB +:10C9300000044AD43D8003A8002301220090520243 +:10C940001946284601F070F9040044D1684601896F +:10C9500001820198417902790902114343780278F2 +:10C960001C021443AC421CD10A041AD44A0401210B +:10C97000520C89030A430096C1788078090201436A +:10C980000023204600F0C9FF040010D10199487926 +:10C990000A79000210430122D20310430871000AF1 +:10C9A000487101A904A8FFF796FF0400D1D00199AE +:10C9B00000964878097800020843694600238A896E +:10C9C000194600F0AAFF822C05D101A902A8FFF7A1 +:10C9D00082FF0400A3D06846068109E001994879E6 +:10C9E0000A79000210434004400C0871000A4871A3 +:10C9F00001A902A8FFF76FFF0028EFD0822C02D018 +:10CA0000204605B0F0BD0020FBE7F7B584B0144622 +:10CA10000646002700F079FF2A480025006D00280F +:10CA20002FD0059801282CD12046FFF771FF070071 +:10CA300027D1002E29D06846058118E00199487851 +:10CA40000978000208432080019B009558791979E4 +:10CA50000202D8780A4301029F78587839431F7838 +:10CA600000029B1D384300F058FF002805D101A9A2 +:10CA700002A8FFF730FF0028E0D0822800D1002074 +:10CA80000746002E01D00F48056500F042FF3846EA +:10CA900007B0F0BDF0B597B00021042003F07FFB94 +:10CAA000084F00243D467C8040356C73AC73287B76 +:10CAB000B96CC00008380E18B08800280DD00120CD +:10CAC000694603E02C190020012800000870306836 +:10CAD000019000216846F9F77AFBB4803C65AC828E +:10CAE000EC8217B0F0BDFE4B9864184640300173DD +:10CAF0001A803838D861CDE7F949002049880A07FB +:10CB000000D501200A06120F01D002221043CA05E7 +:10CB100001D5042210438A0501D51022104349058E +:10CB200001D520210843EE494031497B002901D03D +:10CB3000082108437047FFB5A7B00400289816469F +:10CB40001B9022D00178E6484D0642882292024688 +:10CB500040320092002D14DB8A06920E1E2A0ED05F +:10CB6000229A5205520E10D13288172A0DD3009AFC +:10CB7000927B002A09D1DB4D229AAA4205D0CA092C +:10CB800006D08A06920E122A02D003202BB0F0BDE6 +:10CB9000D348826C0098007B2590C000083810189C +:10CBA0001F9048060CD40098407B002808D00099BC +:10CBB00088731F99289808601F9884800220E5E7F1 +:10CBC000002718A90F7069460F72C54902AA0A64A6 +:10CBD000309A4A6410A90F850F861B981D4600786D +:10CBE00020908106BE4B601F24901A462C32219261 +:10CBF0002898DA691833890E1E93401C0B0006F042 +:10CC000065F81FFDFD11FD1AFD90FDFCFDFBFDFA11 +:10CC1000FDF9FDFCFDF8FDFDFDF7FDF6FDFDFDFD5B +:10CC2000FDF5FD00032C7BD10320287017226A70CC +:10CC30000022AA70E0E2052CF5D1417802780902C1 +:10CC40001143A74B10AA19831185C278807812026C +:10CC500002435A8300297DD091427BD80021184697 +:10CC600081720181491E01841E9800F072FF052027 +:10CC70002870A81C1D900220009021991E9800F099 +:10CC80006BFF002803D047E018A90870F0E2944831 +:10CC90002030807C012803D002206870102002E040 +:10CCA00001206870022022908D48303023900022AD +:10CCB00020A9239802F06DFD00282AD120A8007831 +:10CCC0002299814225D132880099801C511A8142D3 +:10CCD0001FDB83481D99C08D0870000A48701D989D +:10CCE00020A9801C1D9000981D9A801C00902398FC +:10CCF00002F04FFD20A909781D9840181D9000985A +:10CD0000401880B2009021991E9800F025FF00285D +:10CD1000CDD0009802288DD10A2018A908706CE2A5 +:10CD20006DE0072C6BD341780378090219436C4BF3 +:10CD30008446198310AB1985C37880781B02184389 +:10CD4000674B0029588305D0814203D8012118463A +:10CD5000817200E0A4E061464B7909791B020B4324 +:10CD6000038100218173104600F014FD00280FD1CB +:10CD70005B480121C26991710522C369D2029A8080 +:10CD8000C2699172C26958491181C06900218173D9 +:10CD90005349E01F08841B98C01D48621E9800F08C +:10CDA000D8FE07202870681C009001201D904C4878 +:10CDB0000021C18530E01D98012815D04848C1697F +:10CDC000897901292FD000981038C17B807B090216 +:10CDD000014300980170090A41700098801C00907E +:10CDE0001D98801C80B21D903D4809E013E2BEE111 +:10CDF0007AE1D8E00DE2A0E080E03BE01EE2B6E0A0 +:10CE0000C18D00980170090A41700098801C009043 +:10CE10001D98801C80B21D9021991E9800F09CFEE8 +:10CE2000002802D006E0818DD3E731881D98081ACA +:10CE30000428C0DA1D98012800D16DE72848C1698F +:10CE40008979012903D0828D26498A4205D1818DB5 +:10CE500000980170090A417009E000981038C17B00 +:10CE6000827B0802009910430870000A48701D98E0 +:10CE7000801CC1E1072C01D0152C78D141780378B2 +:10CE800009021943164B198310AB1985C3788078B2 +:10CE90001B02034312480029438301D0994201D960 +:10CEA0000120F1E60E480121817200210181817388 +:10CEB000052C07D024981B99C0B2491D02F043FCF1 +:10CEC0000028BAD100200649C04308841B98009668 +:10CED0000195007818AB8006800E1CAA002105E0A1 +:10CEE0002C190020FFFF000001280000FFF7E6FBDF +:10CEF0000746FE4810A9008B08857EE1032CBCD1B3 +:10CF0000402210A90A86417802780802F7491043A6 +:10CF1000088310A9088520A9009131886B1C491E3F +:10CF20008AB2002100F080FE18A90870002830D1D4 +:10CF30000B20287020A8008833E0052C9DD180218B +:10CF400010AB1986014640780B780202E7481A4375 +:10CF50000283CB7889781B021943E44B104619846D +:10CF600010AB1A85E24A914202D307208CE697E083 +:10CF70003F23DE4A9B021943118421AA0092328882 +:10CF80006B1C521E92B200F04FFE18A908700028C8 +:10CF900003D08328B1D102272FE10D20287020A8CB +:10CFA0008088401C28E120990C22C9095143C91CE2 +:10CFB0001E91A14204D92098400671D500201BE1A2 +:10CFC000417800780902014310A801851B98007878 +:10CFD00042062898C01C1D90002A62DA05206A4685 +:10CFE00010721B980078C00944D00822684602726B +:10CFF0008181A01A87B268468782289806901E9879 +:10D00000201A81B26846C1811D980490401805F02D +:10D010001CFC079006982599C0190890491E08A87D +:10D02000017102A83099F9F7D2F807460021684645 +:10D030000172002F1BD0022F18D1009808A9007B85 +:10D040000979401E884210DDA848289A836CC900DF +:10D050005A50816C08A80079C000001D0C5200983D +:10D060000099407B401C4873C7E00527EAE0062092 +:10D0700069460872002000901E980021201A209016 +:10D0800082B21B9B10A8DB1C008D00F046FC014601 +:10D0900018A80170002268460272832903D003E0B9 +:10D0A00093E00720E4E702271B98007840060ED59E +:10D0B0008E484188C90506D510AA018B128D914270 +:10D0C00001D100214162002018A9087094E0FF21DD +:10D0D000013110A80186018D8448018320990184C3 +:10D0E0001D994162132085E0052C6ED341780378A9 +:10D0F0000A021A4310A90A859446092269460A724F +:10D100000021009101222499D20311438AB2C178EF +:10D11000807809021B9B01435B1D604600F0FDFB0C +:10D1200018A90870002269460A720122520210A949 +:10D130000A86832802D0002805D099E06B48098D23 +:10D14000018302277EE06948006D002807D0204651 +:10D150001B99FFF789FB18A9087000284DD12B46B1 +:10D16000324620461B9900F024FB074645E01B98F9 +:10D17000022C4078009064D1002801D0012860D1B1 +:10D180000A2168460172009901731AAA00200099C9 +:10D19000FFF73BFC0146684641730021817302A8FA +:10D1A0003099F9F714F80746002168460172012109 +:10D1B000890210A80186022F08D04C48006C8079A3 +:10D1C000002807D018A9087020E04BE047490098D4 +:10D1D000088337E0002F03D0812018A9087031E0C0 +:10D1E0001AAA01200099FFF710FC18A9087000285E +:10D1F00003D119202870012030806846007A002869 +:10D2000004D002A83099F8F7E2FF0746002F2BD090 +:10D2100018E0062038E522993448090711D5012C79 +:10D220000FD10B2269460A72C08888810021042030 +:10D2300002F0B5FF082010A90886BFE62098400636 +:10D2400010D50327294810AA4188128E1143418026 +:10D250005005400E04D01F99289808601F988480BC +:10D26000384693E404200FE518A8007800280ED073 +:10D27000012028701B980078687010A8008DA87095 +:10D28000000AE87018A80078287105203080174837 +:10D2900010AA4188128E91434180E1E7FFB506460E +:10D2A0009FB000201B903178012088401149124A1C +:10D2B000084010A908860D494988914203D00028EA +:10D2C00004D0080702D5012023B0F0BD219D00271E +:10D2D0002F7020983C46018810A8018418A8077177 +:10D2E00000F013FB6846077202A907E02C19002022 +:10D2F0000102000009F80000FFFF0000FA48016485 +:10D3000001464031826C1A91097BC90008395718CF +:10D3100022994164307801282AD0022809D00328B4 +:10D3200079D12878800980011D302870EE48B188B5 +:10D33000C1803078022804D12878800980011B3010 +:10D34000287001A8009010A8008CEB1CC01E82B2AF +:10D35000B088002100F068FC0028E1D1B188697034 +:10D36000090AA9706946888810A9C01C08842DE1A3 +:10D37000717918A801713079012802D00228CFD123 +:10D38000E6E0D9487F2340881B010246184010ABD5 +:10D390001886802840D006DC102810D020280ED017 +:10D3A00040280AD120E0FF38013859D0FF38013831 +:10D3B0006AD0FF38FF3802387ED0052491E0D006CD +:10D3C00001D5082000E010201B9004206946087257 +:10D3D0000020888118A800900195318919AB1CAAFA +:10D3E0001B98FFF76BF977E0BF4B3289188B8242AD +:10D3F0004FD10A221B92002973D101A9009110A9D3 +:10D40000098C6B1C491E8AB2002100F00DFC18A982 +:10D4100008710B2017E0F6E0B34B3289188B82427B +:10D4200037D10C221B9200295BD101A9009110A9D0 +:10D43000098C491E8AB21946098C6B1C00F0F4FB5A +:10D4400018A908710D2028706946888810A9401C09 +:10D450000884042069460872A348008B888140E054 +:10D46000A14A3389108B834213D112231B930029C5 +:10D4700037D1536A002B05D00091128C00F04DFA81 +:10D4800018A9087113205EE097483289038B9A42ED +:10D4900001D00424E7E016221B92026D002A09D174 +:10D4A000F268002A06D002651A98328A82821A9A95 +:10D4B0000020D082002900E02FE012D1B88839681E +:10D4C000FFF7D2F918A9087100280AD1B8882B46AD +:10D4D00018AA396800F06DF90446022818D0042C07 +:10D4E00016D0B88800280FD06846007A002804D0EB +:10D4F00002A82299F8F76BFE0446012069460872DB +:10D50000386803900020B880002C5FD0052C7BD0B9 +:10D510006846007A032873D0A5E018201B900029E4 +:10D5200005D071483189018300210165D9E76E4832 +:10D530000246017E18320120FFF767FA18A9087128 +:10D540000028CED119202870012010A90884C8E72E +:10D550001A98407B002856D0307AC0001358001D1E +:10D560000193105A1D9000291AD100F0D2F906201B +:10D5700069460872002000901D980F3882B2019809 +:10D580008178437808021843019B0021DB1C00F0DE +:10D59000C4F918A90871002269460A72832830D09C +:10D5A000002118A8017110A80184012168460172A8 +:10D5B000019803901A981A99407B401E48731A9854 +:10D5C000807B002802D01A99401E887310A8008E14 +:10D5D0007F21090102468A431DD04348002200886A +:10D5E00011468300042002F038FD3F483178017174 +:10D5F00010A94088098E08433B4948800FE003E0AA +:10D600002BE002242FE00524374810AA4188128E0F +:10D610009143418027E034494A8882434A806846E2 +:10D62000007A002805D03048416C02A8F8F7CFFDF9 +:10D63000044618A80079002815D01B9868700120AE +:10D6400028702948008BA870000AE87018A8007993 +:10D650002871052110A8018405E02348416C02A827 +:10D66000F8F7B5FD044600F054F91F48408840051E +:10D67000400E20D11A98807B00281CD1B888002841 +:10D6800019D0209910AA098811842299009139682B +:10D6900018AA219BFFF74FFA044602280BD001205D +:10D6A000694608723868039002A82299F8F78FFD3E +:10D6B00004460020B88010A8018C209801802046E4 +:10D6C00002E600B50022D243074997B04A800428F9 +:10D6D00007D1022268460270097901710021F8F72A +:10D6E00076FD17B000BD00002C19002010B5394C94 +:10D6F00003780022216C012B02D0022B44D126E0BA +:10D700000B78002B01D0042B03D10A71226C03216A +:10D710001170216C83880A79D200921D8B52216C82 +:10D720000A79D20008328918C2880A80216C0389DC +:10D730000A79D2000A328B524289206C0179C900E1 +:10D740000C314252216C0879401C087120E00A74A7 +:10D75000226C81889180216CC288CA80226C0189E8 +:10D760001181226C41895181216CC068C860616C53 +:10D77000206CF8F72CFD0146022807D0206C007CB5 +:10D78000002802D1002903D0812010BD832010BDC4 +:10D79000002010BD8178012909D100880521C90226 +:10D7A000884202D0491C884201D1002070470520E0 +:10D7B000704710B51488844201D2052010BD17248B +:10D7C0001C701080421E491C581C04F0DDFF002014 +:10D7D00010BD00002C19002010B50446FEF759FFBB +:10D7E0002046FFF76EFF10BD10B58B78002B11D0CF +:10D7F00082789A4207D10B88002B0BD003E0091DD9 +:10D800008B78002B08D08B789A42F8D103880C884B +:10D81000A342F4D1002010BD812010BD10B5002915 +:10D8200002D001290DD102E00088000501E0008846 +:10D830008004800F07D001281CD0022809D00328BB +:10D8400010D0812010BD002901D0032010BD02207E +:10D8500010BDF6F754F803280CD004280AD000288D +:10D8600006D009E0F6F74BF8042803D0022803D0CD +:10D87000052010BD002010BD0F2010BDF3B5C81C41 +:10D8800080080E46800081B0B04201D08620FEBDE7 +:10D89000FE4C354626600198A08000202081E08063 +:10D8A00014E0B807A978800D0843F94904F0E6FFB1 +:10D8B000E088401CE080B80607D42089401880B278 +:10D8C00020810199081A8019A8600C352F887807E3 +:10D8D000E7D40020A072FEBDEC480C22C18800896C +:10D8E0005143081880B2704770B51346E74A45188F +:10D8F0009488AC4201D2842070BD126810180A4688 +:10D90000194604F041FF002070BDE04901208872F3 +:10D910007047DE49002088727047FFB589B09704D0 +:10D920000E460546BF0C029200F017FA040021D003 +:10D93000002069460873D548807A012812D0012159 +:10D940002046FFF76BFF002815D12078400609D547 +:10D950000221684601730582218841828682C7823E +:10D960000C9806900298000407D500273E46012532 +:10D9700001970CE001200DB0F0BD2078A178800760 +:10D98000800D0843C249019004F078FF0D460298CB +:10D9900040040AD50198A84207D12088E178800583 +:10D9A000800F00020843B04201D3AE4201D90720E4 +:10D9B000E1E7B81980B20290A84201D90D20DAE758 +:10D9C0006846007B002804D003A8F8F7FCFB002879 +:10D9D000D1D10198A8420BD12088032109028843A4 +:10D9E00002998905890F0902084320800298E07096 +:10D9F0001298002800D007800C9800280CD02078BE +:10DA0000000609D4A0683A4680190C9904F0BCFEBF +:10DA100020881021884320800020ACE7FFB59B4D73 +:10DA200081B00E46E8882F680C21009048433C18CE +:10DA30009749039804F022FF0A462889E11B84468F +:10DA40000C314018318880B28B0601D5002300E0EC +:10DA500013461818AB8880B2834202D8842005B0E0 +:10DA6000F0BD0098894D401C80B2E88021800D995E +:10DA7000002900D00C600399A170E2702188039DF9 +:10DA80008908AD058900AD0F294303252D02A9435F +:10DA90009505AD0F2D0229430425294321800C99BA +:10DAA000002900D0088001998978A171019909881D +:10DAB000A1803178890601D50B9905E0734962444C +:10DAC00092B20A81991AC919A16000212173327892 +:10DAD000920601D50020C2E700910B9B0A9A049997 +:10DAE000FFF71BFFBBE710B5044600F036F900282E +:10DAF00006D06649641ECC8000210170084610BD26 +:10DB0000012010BD002803D0401E0880002070476F +:10DB10000120704710B55D490288CB889A4201D335 +:10DB2000822010BD0B680C21514359180B88CC780A +:10DB30009B059B0F1B02234341608C7904738C88E7 +:10DB40004481C3818968521C0161028002810020E6 +:10DB500010BD012101827047FEB505460020C0437B +:10DB6000088068680F468178684681706868018817 +:10DB70006846018000218171288A2C88A04200D348 +:10DB800004462C8234E0288A401C2882301D6968B3 +:10DB9000FFF72AFE002829D139883E48814201D169 +:10DBA000601E38806888A04227D33088F1788005CD +:10DBB000800F0002084302906946301DFFF714FEF3 +:10DBC000002813D12989334881421AD000213046D8 +:10DBD000FFF724FE002809D12A890298824205D144 +:10DBE000E968B06804F0A3FD00280AD0641CA4B260 +:10DBF000204600F0B2F80600C5D1641E2C828220B7 +:10DC0000FEBD7C80B079B871B088B880308838812A +:10DC100030788007810DB078014379810298B8810E +:10DC2000B06838610020FEBDFFB585B014460F46D0 +:10DC3000059800F092F8050037D01448BE05807AA8 +:10DC4000B60D012815D000212846FFF7E7FD002872 +:10DC500029D1287840060CD5012168460170059924 +:10DC600081802988C18006814481F8F7ACFA0028B8 +:10DC700019D12888AA788107890D11438005800F62 +:10DC8000EA7800021043BE4211D005E0841900205A +:10DC900001020000FFFF0000374A914207D3611ED6 +:10DCA000814204DD0B2009B0F0BD0120FBE7864274 +:10DCB00001D90720F7E7801B82B2A24200D9224691 +:10DCC0000E98002800D002800898002804D0A86888 +:10DCD0008119089804F058FD0020E4E770B5144657 +:10DCE0000D4600F03AF800280DD001882980002C5C +:10DCF0000DD0017880788907890D01431E48814243 +:10DD000003D2012002E0012070BD0020207000201D +:10DD100070BD70B516460D4600F01FF804000DD01A +:10DD20002D882580FF2E16D0A807A178800D0843E6 +:10DD3000114904F0A3FD002E06D101E0012070BDC1 +:10DD4000FF31FF31033189B2A170A8088000890535 +:10DD5000890F08432080002070BD0849CA8882428C +:10DD600007D3002805D00C22096850430C38081846 +:10DD70007047002070470000010200008419002055 +:10DD8000F0B585B00E4605460020694608707078EB +:10DD9000FE49C00003900C58FD4F002D0ED0022DFF +:10DDA00073D0002C72D02078801E030004F08EFF08 +:10DDB00009837F7F7F83797F77727F00002C03D177 +:10DDC000F4A16B2004F07DFE2078801E030004F097 +:10DDD0007DFF09065E5E5E19365E50545E00307847 +:10DDE000062803D0EBA1762004F06BFEB8687168BA +:10DDF000806A032204F0C8FC0120694608700028EC +:10DE000035D1CEE730780C2803D0E2A1812004F090 +:10DE100058FEE0680078002806D0B8687168C06BCA +:10DE2000102204F0B1FC28E0B8681021406B04F027 +:10DE300008FDB868C16A406B0A787168F1E730780C +:10DE40000D2803D0D3A1942004F03BFE04206946A2 +:10DE5000087071684878097800020843B9684A6A0E +:10DE60005178127809021143484069468880084673 +:10DE700008E0C8A1AF2004F024FE6846007800281E +:10DE80008FD06846F5F740FD8BE727E01CE0C1A185 +:10DE9000B420F0E7B8686169406CFEF71CF8A1692E +:10DEA00000E0E168B868406CFEF715F803E0B9A13E +:10DEB000E32004F006FEB8682146406CFEF70BF83C +:10DEC000B24A039900205050022D07D0002D05D0F2 +:10DED000012D03D0AFA1EF2004F0F3FD05B0F0BD9C +:10DEE00010B501780124012902D0022910D112E0D5 +:10DEF0004268A748002182600170A4486C38C1665E +:10DF0000016741678167928902214C3001F083F9F2 +:10DF10000024204610BDFF209EA11C3004F0D1FD3E +:10DF2000F7E7F0B505469EA103C997B01491139089 +:10DF3000002108A8017595482A781030944C049067 +:10DF40002078012605903746A068130004F0BEFE35 +:10DF50000CEE073098EFF5EBEAE9E8E8E7EE217020 +:10DF60000124FF2655360D4610A80570457001F0B6 +:10DF700063F90746012803D086A1304604F0A1FDCD +:10DF800010A93846FFF7FCFE2046641EE4B20028C4 +:10DF9000EAD10A20694608706846029501F02AFA1B +:10DFA000002803D0FF207BA15E3066E00026E6E279 +:10DFB000006B0078C0072ED06846077001F01AFA8F +:10DFC000002804D0FF2073A1713004F07AFDA0680E +:10DFD000406CFDF777FF050004D1FF206DA1743080 +:10DFE00004F06FFD08984078C1006848455006204D +:10DFF0002870A068016869600069A8606448C01C56 +:10E00000E860284601F0F6F9022804D0FF2061A15B +:10E010007E3004F056FDA068006B00784007C5D53F +:10E020006846077001F0E6F9002804D0FF2059A1E6 +:10E03000863004F046FDA068406CFDF743FF050004 +:10E0400004D1FF2053A1893004F03BFD08984078AB +:10E05000C1004E48455006202870A06801686960DC +:10E060000069A8604A48401DE860284601F0C2F9EE +:10E0700002289BD0FF2047A1933004F022FD95E7B2 +:10E08000A8680028684632D001712879012833D069 +:10E09000022804D0FF203FA1AD3004F012FD3B4820 +:10E0A00010221030A96804F06FFB38481030014688 +:10E0B000103148602078C1062DD5EF21084020702E +:10E0C000032069460870314810300290684601F01C +:10E0D000B3F80446022808D0002C06D0012C04D046 +:10E0E000FF202CA1BE3004F0ECFC69462AE1077148 +:10E0F000264820304160DDE7244A04986C3AD16715 +:10E1000041608160C1600621A86803F087FA1F4959 +:10E1100010310860C9E720210843207046E758E124 +:10E1200014E1D6E0A3E046E007E000E031E2FF20A2 +:10E1300018A1E73004F0C5FC21E2172269460A72F3 +:10E140000F7089788A08297992008907890F0A4314 +:10E1500069468A70FB210A4029794907C90F89005D +:10E160000A4369468A70EA888A80826C02A96846F6 +:10E1700001F082F9002804D0FF2006A1F73004F056 +:10E18000A0FC052108A8017568460DE0FC190020D7 +:10E19000A00000207372635C736D2E6300000000AA +:10E1A00004411A8800A48000017A0187A068002633 +:10E1B000806C0F90E7E16846077001F01BF90028BA +:10E1C00003D0FD49FD4804F07CFCA068406CFDF7DD +:10E1D00079FE060004D18320F749800004F071FC29 +:10E1E000A068406CFDF76EFE070004D1F348F249C9 +:10E1F000801D04F066FCF2488068406CFDF762FE0A +:10E20000040004D1ED48EC49093004F05AFC0898A8 +:10E210004078C100EB4846500A203070287A3071AF +:10E220006868E74DB060A868806C30611720307373 +:10E2300077613046B46101F0DDF80446022808D069 +:10E24000002C06D0012C04D01120DB49400104F041 +:10E2500038FC2046316AFFF793FD297805220A40F1 +:10E26000042A00D0A2E6FB22114029702AE0059979 +:10E270004908490021708A071CD5FD2211402170F0 +:10E280000F216A46117017211171806C0290684647 +:10E2900000F0D2FF0546022808D0002D06D0012D3F +:10E2A00004D0C648C4493A3004F00BFC69462846FD +:10E2B000FFF766FD2078052101400429D2D1FB211A +:10E2C00008402070072008A90875BD4880780876A6 +:10E2D0006CE66846077001F08DF8002804D0B74856 +:10E2E000B549543004F0EDFBA068406CFDF7EAFD41 +:10E2F000060004D11320B049400104F0E2FBA068FD +:10E30000406CFDF7DFFD070004D1AC48AA495A3044 +:10E3100004F0D7FB08984078C100AA48465007206F +:10E320003070A068406870606868F760B060304620 +:10E3300001F060F8040004D0A0489F49653004F063 +:10E34000C0FB316A2046FFF71BFD2FE668460770C9 +:10E3500001F050F8002804D0984897497A3004F02A +:10E36000B0FB08984778A068406CFDF7ABFD06004D +:10E3700004D151209049C00004F0A3FBA068406C78 +:10E38000FDF7A0FD040004D18C488B49823004F0D5 +:10E3900098FB8C48F900465008182A694260092009 +:10E3A000307068687060A868B060A889B0818548DE +:10E3B0006C3830611030B4617061304601F01AF889 +:10E3C000022804D07D487C49903004F07AFB2F75F8 +:10E3D000ECE57C4B00212033197002216A46117054 +:10E3E00001932979002902D0184601709BE07449F5 +:10E3F00003220C314968FB230A708A7800259208B1 +:10E4000092001A408A70027A1207D20F4A706D4A3F +:10E4100020325560C37ACB70837A13724469537A81 +:10E4200024785B08E4075B00E40F2343537284699C +:10E43000D460FD242340C4692478E407A40F234357 +:10E440005372036A13614D710D71437A5C4A9C07E4 +:10E450000C32A40F1268012C04D19478A407A40FE5 +:10E46000012C1DD09B089B00437293785B0702D45C +:10E47000437A5B0728D5037A13AD5B075B0FDC009B +:10E480005B00E318147864001B19DBB2DC082C5D18 +:10E490005D076D0F06235B1BDC40A3079B0F14E099 +:10E4A000037A54795B065B0F1C404C711379062587 +:10E4B0002B400B71DB002343414C63708B789B082E +:10E4C0009B005B1C8B70D0E700238C78FB252C40D5 +:10E4D000457A6D07ED0FAD002C438C70047A64070C +:10E4E000640F0C705178012908D1017A090705D50C +:10E4F000032108A801750221017614E0022B1ED029 +:10E50000012B21D02F4B00216C3B049AD96751601D +:10E510009160D16019467C310A4610325160417ACF +:10E52000FB2211404172684600F086FE040021D0B3 +:10E53000012C20D02049244804F0C3FA1BE003201A +:10E5400008A908750F76EEE70598000704D5C320E3 +:10E550001949800004F0B5FA1A4C0D211034E01C62 +:10E5600004F06FF9204610304460022008A90875B5 +:10E570000E94D8E7002669462046FFF701FC08A85C +:10E58000007D002802D00DA8F5F7BEF9304617B07F +:10E59000F0BDCB2008498000CCE5F0B5054697B02A +:10E5A0000C460020694608700548064E2F78483E04 +:10E5B000017882680AE0000094E10000090200008E +:10E5C000A0000020FC1900201F0300003B0004F005 +:10E5D0007DFB0BA8820724394A6977778D9AA800BA +:10E5E0002B20694608730CA903A8FDF7A1FC00289D +:10E5F00003D05349534804F064FA53490D9804F08A +:10E600003DF952480160524869680160AA68426059 +:10E6100001910820694608708CE08A0610D5DF2237 +:10E620001140017003202070484810304168A160FB +:10E630004068002802D00020207177E00120FBE72D +:10E64000102256E02B2069460873404903A85C3924 +:10E65000FDF76EFC002804D03A483949293004F00F +:10E6600030FA04201BE02A206946087303A8102210 +:10E670000230696804F088F807A810220230A968FF +:10E6800004F082F8314903A85C39FDF751FC0028F9 +:10E6900004D02C482A493A3004F013FA052020709F +:10E6A000666043E02A79002A02D0012211430170FA +:10E6B00005206946087028798880A868029039E0AA +:10E6C000106B4023018819430180106C6968102287 +:10E6D00004F05AF82AE0FB22114001700620694636 +:10E6E0000870A96868680291019023E0CB0703D005 +:10E6F0000222114301704AE70F2020701720207179 +:10E70000906CA06012E0537A9B0706D0126B44789D +:10E710001388FF3401342343138004221143017012 +:10E7200004E0084806497C3004F0CBF968460078DC +:10E730000028E0D06846F5F7E7F828E701207047A1 +:10E7400094E100004D03000040420F000C1A00202D +:10E75000AC00002070B504780D460646230004F096 +:10E76000B5FA0B1C181C1C1C1C07181C1C181C00C0 +:10E770000021052001F013FDB068007805280CD0B9 +:10E78000FA480022008811468300052001F065FC4C +:10E7900003E00021052001F002FD002D0ED0002035 +:10E7A000287029463046FFF7F8FEF1482978005DC9 +:10E7B000884201D1032070BD022070BD0021304687 +:10E7C000FFF7EBFE002070BD30B5E8494B68497A91 +:10E7D0000A0111460C315C5C032C0CD00446002568 +:10E7E0002034257125725C5CA500AA18641C5C5459 +:10E7F0009850032030BD062030BDF0B504462646B3 +:10E8000020360D463279012008218FB0002A0CD025 +:10E81000012A21D0022A2BD0032A04D12A78052AE2 +:10E8200001D1297000200FB0F0BD01203071606867 +:10E8300000280AD0A0690170616841602169816087 +:10E840006169C160FFF7C0FFEDE70720287020690C +:10E8500068606069A86009E029780729E3D102208F +:10E86000307105202870C248203868600320DAE73C +:10E8700029780529D7D1A08910280AD9103880B263 +:10E88000A081A1681023091803A86A6800F033FE6C +:10E890002DE0102804D0C1B20BAA1020A76809E00F +:10E8A00010232269A16817E0491EC9B2401EC0B2F8 +:10E8B0007B5C13540029F7D100280AD0401EC0B257 +:10E8C00080211154002102E0401EC0B211540028E2 +:10E8D000FAD1626910230BA907A800F00CFE1023DF +:10E8E00007A903A86A6800F006FE0320307160687B +:10E8F000019003A8029005206946087029466846E1 +:10E90000FFF728FF8FE7F0B5044626460D46203670 +:10E91000317901208DB000290BD0012938D002298E +:10E9200005D12978052902D10920287000200DB0D1 +:10E93000F0BD217D6846CA07D20F02738807C10F58 +:10E9400068460174012203A905A800F0CCFD04A9C2 +:10E95000012205AF481D00F0C6FD0722B81CE16882 +:10E9600000F0C1FD07A807220130216900F0BBFDBE +:10E970006068019009A80290102305AAA16800F020 +:10E98000BAFD01203071052168460170294621E059 +:10E9900029780529CBD1062203A8E16900F0A3FD5F +:10E9A00004A806220230A16900F09DFD042106A8FA +:10E9B00000F091FD6068019007A80290102303AA5F +:10E9C000696800F098FD02203071052069460870E2 +:10E9D00029466846FFF7BEFEA9E7F0B5074685B0B1 +:10E9E0000C460020694608703E466248203632795F +:10E9F0008179133801250078130004F067F9180DA8 +:10EA0000FEFDFCFBFAF9F8F7F6F5F4F3F2F1F0EF9E +:10EA1000EEEDECEBEAE9E8E7B968039100291BD0D9 +:10EA2000012269460A7003220A710A224A71396971 +:10EA30000291397900297DD0039A1278002A7AD080 +:10EA40000C2A78D2130004F041F90BF009F0354D8F +:10EA50008498B1F2EEEDF0000020BEE30021062024 +:10EA600001F09DFB3879072866D1424D133D287887 +:10EA7000022802D000287FD101E0002028700398EE +:10EA80000079C11F0A2901D30A249AE16870394824 +:10EA90000722C01F039900F026FD01203071287065 +:10EAA0000220694608703348801F01903869401C75 +:10EAB00002903BE211293DD12E4D133D0228DAD1BF +:10EAC00068686978007A884201D9062479E1039957 +:10EAD00026481022491C303800F005FD032028701C +:10EAE000022046E11129E6D1224C133C0428C2D170 +:10EAF0000520207003991D481022491C203800F081 +:10EB0000F2FC062030717869032101706268516857 +:10EB1000416016492039816021460C31C160C91D10 +:10EB20000161017D537A49084900DB07DB0F194376 +:10EB3000017502E064E34AE387E1D3688361FD2362 +:10EB40001940537A9B07DB0F5B001943017511696C +:10EB500079E10229AFD1002868D005206946087103 +:10EB60000398407848713869029045E3601A0020A4 +:10EB70004C2D0100C700002073E011299BD1F84CF7 +:10EB800006286ED1A0680399406B1022491C00F042 +:10EB9000AAFC0620694608703869029000200871B6 +:10EBA00001466846FFF7D6FD072058E00B299AD1A9 +:10EBB000EB4C07287ED1A0680399C06A0222491C49 +:10EBC00000F091FCA0680822006B17E00EE10AE358 +:10EBD000F3E2D3E2B9E2AEE28EE265E24FE248E26E +:10EBE00028E2FDE1E7E1D0E1C6E1BFE1ADE16DE1A1 +:10EBF0004AE12BE1DCE0BFE0B0E076E00399C91C1C +:10EC000000F071FC0621684601703869029000210D +:10EC100068460171FFF79EFD20461330417949088F +:10EC200049003EE041E01DE001E05CE0E2E2112944 +:10EC300090D1CB4C08283DD1A0680399806B10225D +:10EC4000491C00F050FC06206946087038690290A3 +:10EC50000020087101466846FFF77CFD09202070FE +:10EC6000BDE227E0082989D1BD49092822D10398AE +:10EC700042788868C16B0A700399006C0622891C6F +:10EC800000F031FC062168460170386902900021CD +:10EC900068460171FFF75EFDB14813304179FD22EE +:10ECA0001FE041714FE230717EE01129C0D1AC49C3 +:10ECB0000A2801D0082484E088680399406C102257 +:10ECC000491C00F010FC062168460170386902906A +:10ECD000002168460171FFF73DFDA14813304179DD +:10ECE000FB221140DDE707246BE0217802297DD16A +:10ECF0009B490128FBD162684A6014780846002CC1 +:10ED00005DD106216A46117039690291072111719E +:10ED1000029902240C70CA785207520FCA704B79BC +:10ED20005B075B0F4B718B795B075B0F8B71D207B6 +:10ED300001D18A714A7105460A794078824200D22F +:10ED40006A7087480722133000F0CDFB00202C703A +:10ED5000307101466846FFF7FDFC40E22178042946 +:10ED6000C5D1032871D108227E48616800F0BBFB41 +:10ED7000032030710420E3E121780429B7D1784FD2 +:10ED80000328B4D1774808220830616800F0ABFB53 +:10ED90000420307178684168002907D00321217070 +:10EDA000002121714068A060032531E20320C7E102 +:10EDB000207803289BD1207900281BD00446002C02 +:10EDC00014D0062168460170386902900221684615 +:10EDD0000171029805210170447000216846FFF717 +:10EDE000B9FC012168460170042100E0A2E1017133 +:10EDF000447105E25A49A06849680028486001D179 +:10EE000059484860052030717869032202704A68C9 +:10EE10004260544A8260524A0C32C260D21D026182 +:10EE2000027D4B7A5208DB075200DB0F1A43027552 +:10EE3000CB688361FD231A404B7A9B07DB0F5B0095 +:10EE40001A4302750969C16194E1F2E02178092948 +:10EE500086D14349032891D10420087006206946D1 +:10EE6000087038690290112008710298032101701E +:10EE7000401C1022616800F036FB00216846FFF755 +:10EE800069FC00203071AAE12178092992D1052876 +:10EE900090D13449626820391020401EC0B20B5C0A +:10EEA000145CA34203D000200424307189E70028B9 +:10EEB000F3D107203071786904210170284949682D +:10EEC0004968416027498160103952E120780A2859 +:10EED000BED106216846017038690290112168464A +:10EEE0000171029804210170401C10221D4900F09C +:10EEF000FAFA00216846FFF72DFC194810214078E6 +:10EF00006268091AC9B2101800F0E5FA6068019049 +:10EF100013481330C178C9070FD08179002902D175 +:10EF20004079002809D00820307109E1214668465F +:10EF3000DFE0054601287CD06AE1072069460870B9 +:10EF400000216846FFF706FC4BE120780E289DD192 +:10EF50000348616881604969407808700920A2E629 +:10EF6000B4000020501A00202C2D0100C80701D049 +:10EF70000A20E3E00F2096E620780F2859D1A068F8 +:10EF80003861207938730B20F3E620780428F5D116 +:10EF90006168F84C0822A068C06900F0A4FA0C204F +:10EFA000307178690722B9690270A268D36843603A +:10EFB000D2698260DDE020780D28DFD1ED4D6168F7 +:10EFC000A86802230269806900F095FA0D2030716B +:10EFD000786906210170A9688A68426009695FE062 +:10EFE00020780C28CAD1E34D6168A8686A78006A65 +:10EFF00000F079FA6878AA681021091A126AC9B271 +:10F00000101800F068FA062168460170386902900D +:10F01000112268460271029810220170A968401CF2 +:10F02000096A00F060FA00216846FFF793FB0E20A2 +:10F030005AE0A2E020780F287CD1062069460870AB +:10F04000386902900B200871029C0720C94D20707E +:10F05000A86802228169601C00F045FAA8680822AD +:10F06000C169E01C00F03FFA00216846FFF772FB1F +:10F0700080E7880701D5102060E0132013E6207890 +:10F080000F287AD1A0683861207938731120307147 +:10F09000786906210170B7498968C9684160B64935 +:10F0A0008160B549091D64E020780C2865D1B14D17 +:10F0B0006168A8681022406A00F015FA06216846C7 +:10F0C0000170386902901121684601710298082187 +:10F0D0000170A968401C496A102200F004FA00215E +:10F0E0006846FFF737FB122030710921684601702E +:10F0F0002146FFF72FFB1CE720780F281AD10621A5 +:10F1000068460170386902900821684601710298CA +:10F1100009210170974989680A78D207D20F427095 +:10F1200049680622801C00F0DEF900216846FFF7DE +:10F1300011FBA2E769E0480705D5142030710920CA +:10F1400069460870F2E61620ADE520780F2853D105 +:10F15000A0683861207938731520307178690621EC +:10F160000170844989688A684260096981608249BE +:10F17000891DC160FFF728FBDBE63DE020780C2805 +:10F1800043D161687B4C1022A068806A00F0ABF923 +:10F1900006206946087038690290112008710298AB +:10F1A0000A210170A168401C896A102200F09BF9B5 +:10F1B00000216846FFF7CEFAC5E76E481330407964 +:10F1C00000280ED0C10703D06A480621017006E06E +:10F1D000800701D5082000E00A2066490870002554 +:10F1E00016E017205FE56349002805D00020307144 +:10F1F00008700A206946087068460078002804D024 +:10F2000000216846FFF7A6FA00255A480021017040 +:10F21000284605B0F0BD10B5584BFF245C7258600D +:10F2200019721A80002204E0491EC9B20B010C3386 +:10F23000C2540029F8D110BDF0B5504E0546717A80 +:10F2400001208DB0FF2971D00127727A73681101F6 +:10F250005C180C31595C8900091F64586A70217868 +:10F260000B0003F033FD0B960709272C59818D4ABB +:10F270004F5492002F7075E0214620310A91097990 +:10F280000120002902D001296DD10EE060680190B3 +:10F2900005A802900D21C01C00F01DF9032205A84D +:10F2A000A16800F020F90A984EE02978052974D168 +:10F2B000062156E029462046FFF725FB69E0214656 +:10F2C0002031069109790120002902D0012964D159 +:10F2D0000EE06068019007A802900822E16800F043 +:10F2E00002F9082209A8A16800F0FDF806982BE0B1 +:10F2F0002978052951D10A2133E02946204600F01A +:10F3000005F946E029462046FFF777FA41E029460D +:10F310002046FFF762FB3CE0214620310591097948 +:10F320000120002903D0012937D116E056E060689A +:10F33000019007A802900822A16800F0D4F80821E3 +:10F3400009A800F0C8F805986946077105200870FB +:10F3500029466846FFF7FEF91BE0297805291CD1EC +:10F360000B212970002018E02946204600F014F9EE +:10F370000FE00000B4000020242D0100601A0020DE +:10F380002946204600F038F903E029462046FFF7D9 +:10F39000D5F9002801D001280CD12562717A736853 +:10F3A00009010C315A5C521E1206120E5A5401D039 +:10F3B00003204AE70328FCD0737A726819011D0103 +:10F3C0000D312C46515C7172FF270D3417550C35E9 +:10F3D000545D002C02D0FF2903D173720DB0F0BD33 +:10F3E00021460C010D34145DFF2CF9D109010D31BA +:10F3F0005354F3E770B5A24C0546607A21460346A4 +:10F400004A6811E0010108460C30105C08E0401E1B +:10F41000C0B286008E199659AE4201D1042070BD4B +:10F420000028F4D10D31505CFF28EBD19448002125 +:10F43000007A01E0491CC9B2884204D90E010C3699 +:10F44000965D002EF6D1884201D8052070BD0801D6 +:10F450000D30135461722846FFF7B6F9032806D021 +:10F46000617A626809010D31515C617270BD284694 +:10F470002830FFF7E1FE70BD10B504780123012CA0 +:10F4800014D10C78022C11D30B23137083785B07F3 +:10F490005B0F537002220A708088002805D0830019 +:10F4A00000221146062000F0D8FD0023184610BDAA +:10F4B0000EB50022012105280AD0062807D168468A +:10F4C00001700221017142710021FFF766F80EBD43 +:10F4D00068460170F6E7002202E0491EC9B24254B4 +:10F4E0000029FAD1704703E0521ED2B28B5C8354DC +:10F4F000002AF9D1704730B505E05B1EDBB2CC5C69 +:10F50000D55C6C40C454002BF7D130BD3EB50446E9 +:10F5100020300D4602790121002A02D0012A39D17A +:10F520000EE06168019157490291012101710520A6 +:10F530006946087029466846FFF70CF9014629E03C +:10F540002878052826D169681022A06800F087F87D +:10F550006868C07B000606D54A4AA06810231032AE +:10F560000146FFF7C8FF1022A168E06800F077F8B5 +:10F57000A068C07B000606D5424AE068102310321E +:10F580000146FFF7B8FF07202870A0686860E068B0 +:10F590000021A86008463EBDF0B5044626460F4649 +:10F5A00020363179012089B0002909D0012905D1FF +:10F5B0003978052902D10C203870002009B0F0BD3F +:10F5C000606803AD01900295022203A8A168FFF7CD +:10F5D0008AFF0222A81CE168FFF785FF0C21281D85 +:10F5E000FFF779FF01203071052069460870394620 +:10F5F0006846FFF7AFF8E1E710B5034620331C7902 +:10F600000122002C04D0012C10D0022C25D11EE0A8 +:10F6100001211971C16806220A70406848601948C2 +:10F62000801F8860801CC86008460CE00C780C2C99 +:10F6300013D102221A71C268052313704968516000 +:10F64000806890601046FFF7BFF8024605E0087832 +:10F650000B2802D10D2008700022104610BD10B5F5 +:10F66000002409E00B78521E5B0023430370401C0A +:10F670000B78491CD2B2DC09002AF3D110BD00007E +:10F68000601A00202C2D010070B50D46040012D028 +:10F69000002D10D02101284603F0D3F81022544940 +:10F6A000284603F071F8524801210838018044804F +:10F6B0004560002070BD012070BD70B54C4E002427 +:10F6C0000546083E11E0716820014018817BAA7B45 +:10F6D000914209D1C17BEA7B914205D10C22294696 +:10F6E00003F025F8002806D0641C30888442EADB49 +:10F6F0000020C04370BD204670BD70B50D460600A9 +:10F700000AD0002D08D03A4C083C20886188401C63 +:10F71000884203D9042070BD102070BD3046FFF729 +:10F72000CCFF002801DB0F2070BD2088616800013C +:10F7300040181022314603F027F82088401C208012 +:10F740002870002070BD70B514460D001FD0002C2D +:10F750001DD00021A170022802D0102817D108E086 +:10F76000687829780002084311D00121A170108027 +:10F770000BE02846FFF7A1FF002808DB401CA07023 +:10F78000687B297B000208432080002070BD012097 +:10F7900070BD70B5054614460E000AD000203070CA +:10F7A000A878012807D004D9114908390A8890425D +:10F7B0000BD9012070BD002C04D028782070288837 +:10F7C000000A50700220087010E0002C0CD049682C +:10F7D0000001411810391022204602F0D5FF287888 +:10F7E00020732888000A607310203070002070BDDC +:10F7F000D8000020734909680160002070477149F2 +:10F8000008600020704701216F4A704B002803D028 +:10F81000012805D06E48704791630020187001E000 +:10F82000D1631970002070476A4901200860684858 +:10F83000801C70470422684B6649002805D05A6036 +:10F84000086901221043086108E008694008400087 +:10F8500008619A605C490020C031886000207047D0 +:10F860005C490622002808D0012809D002280DD0C2 +:10F8700003280FD05648401C70470869904302E0A7 +:10F8800008699043801C0861002070470869904314 +:10F89000001DF8E708691043F5E74E494A6A02433C +:10F8A0004A62002070474B494A6A82434A620020FC +:10F8B00070474849496A0160002070474549CA6954 +:10F8C0000243CA61002070474249CA698243CA6143 +:10F8D000002070473F49C96901600020704730B57A +:10F8E0000546002072B601463A4A384C4032002D97 +:10F8F00011D00123012D0CD0022D02D0072062B6B9 +:10F9000030BDA3706478002C01D09363F7E7916356 +:10F91000F5E7A170F9E7A170F9E72F4904208860A5 +:10F9200029490020C03188602849012008702B49EE +:10F930000A688023120A12021A430A6028490860E2 +:10F94000704722480078704770B5EFF31080C50704 +:10F95000ED0F72B61D4C6078401C0006000E607002 +:10F9600003D120A1CC2003F0ACF86078012806D1A7 +:10F97000A078002803D01749012040318863002D6A +:10F9800000D162B670BD70B5EFF31080C507ED0F02 +:10F9900072B60E4C6078002803D112A1DC2003F06F +:10F9A00090F86078401E0006000E607006D1A078C6 +:10F9B000002803D00749002040318863002D00D182 +:10F9C00062B670BD0004004040000040E800002026 +:10F9D00004200000000500400003004000E400E0B7 +:10F9E00000E100E07372635C736F635F706F776553 +:10F9F000722E63008107C90E002808DA0007000F85 +:10FA000008388008B94A80008018C06904E080087E +:10FA1000B74A800080180068C8400006800F704711 +:10FA2000B44948788978884201D3401A02E02122FB +:10FA3000511A0818C0B27047AE4923314878897806 +:10FA4000884201D3401A02E02122511A0818C0B29C +:10FA50007047A849463148788978884201D3401ACE +:10FA600002E02122511A0818C0B27047A04810B510 +:10FA70000C300168FF22120291430122D20311438C +:10FA800001609C49002023314870887023394870F8 +:10FA90008870463148708870974801F0FCFD9648A0 +:10FAA000401C01F0F8FDF2F723FE00F015F910BD3F +:10FAB00020207047B4E770B50C4605460026FFF7D6 +:10FAC000AFFF8C49A04214D30A46203A00232046B7 +:10FAD000641EE4B200280BD08878105C2870887807 +:10FAE0006D1C401CC0B288702128F0D18B70EEE7ED +:10FAF000012600F0F1F8304670BD202070479BE7EA +:10FB000070B50C4605460026FFF796FF794923316C +:10FB1000A04214D30A46203A00232046641EE4B2D1 +:10FB200000280BD08878105C287088786D1C401CE9 +:10FB3000C0B288702128F0D18B70EEE7012600F06A +:10FB4000CBF8304670BD202101700020704710B501 +:10FB50000446FFF77EFF2070002010BD70B50C46F4 +:10FB60000546FFF776FF63494631A04215D30A46A2 +:10FB7000203A00232046641EE4B200280BD0887887 +:10FB8000105C287088786D1C401CC0B288702128D9 +:10FB9000F0D18B70EEE7002400E0584C00F09CF8A8 +:10FBA000204670BD70B50C460546212904D9FF20BA +:10FBB00053A1473002F085FF4C484068103840B2EE +:10FBC000FFF718FFC6B20D20FFF714FFC0B2864240 +:10FBD00007D2FF204AA14D3002F073FF01E0F2F797 +:10FBE000C7FD21462846FFF766FF0028F7D070BD05 +:10FBF000F8B5404E07462336B1787078212200F0E0 +:10FC000060F8354623353B4C00280ED0A17860784B +:10FC1000212200F056F8002814D0A9786878212213 +:10FC200000F04FF800281AD025E032497078C91C3E +:10FC30000F547078401CC0B2707021281BD1002076 +:10FC4000707018E02B49607820390F546078401CA0 +:10FC5000C0B2607021280ED1002060700BE02549F1 +:10FC6000687826310F546878401CC0B2687021282B +:10FC700001D100206870B1787078212200F021F85D +:10FC800000281DD0A1786078212200F01AF8002801 +:10FC900016D0A9786878212200F013F800280FD038 +:10FCA000F2F748FD144801F0FEFC012149038842A7 +:10FCB00003D013A1C12002F004FF0F4801F00BFD97 +:10FCC000F8BD401C884205D0904201D1002901D0E6 +:10FCD000002070470120704710B5074801F0E3FC91 +:10FCE000002801D1F2F715FD10BD000000ED00E085 +:10FCF00000E400E08C1A0020EB0000200720000048 +:10FD00007372635C736F635F72616E642E63000075 +:10FD100010B5284801F0BFFC002803D026A11D2003 +:10FD200002F0CFFE2348401C01F0B5FC002803D0B0 +:10FD300021A1212002F0C5FE10BDF1B5224D6F6852 +:10FD400001261C4801F0AFFC1A4C002803D1002604 +:10FD5000601C01F0C0FC1D4A1D490120506000BF1D +:10FD600000BF00BF00BF00BF00230B604B60009BC3 +:10FD70006B60106000BF00BF00BF00BF00BF08681D +:10FD8000002802D148680028F9D048680028E4D14A +:10FD9000002E04D06F60601C01F085FC07E0601C41 +:10FDA00001F081FC0028D3D1024801F094FC00202E +:10FDB000F8BDC2E7ED0000207372635C736F635F90 +:10FDC0006563622E6300000000E5004000E0004033 +:10FDD00000E1004030B5EFF31081CC07E40F72B6BC +:10FDE0001D4A116910230D461D431561002C00D1D9 +:10FDF00062B61A4DC406E40E0120A0402C680442ED +:10FE00000DD0C8060AD4EFF31080C007C00F72B639 +:10FE1000116999431161002800D162B630BD20BF3D +:10FE200040BF20BFEAE70E4908784A78401CC0B2BC +:10FE3000904200D008707047084A094820BF40BF70 +:10FE400020BF4178037843701368002B02D10378F8 +:10FE50008B42F3D00020704700ED00E000E200E0AC +:10FE6000EF000020FEB5F44C07466068FF213E011C +:10FE700081552178FF2913D00901083141583246B4 +:10FE8000491E083209020192090A805800F0CBF994 +:10FE9000002802D02478254615E06168207888552E +:10FEA0002770FEBDE448426801981158280100906F +:10FEB0000830105800F0B7F9002806D1DE482C466B +:10FEC000416800980D5CFF2DECD1DB4821014068B2 +:10FED00085554754FEBD70B5D74A04460020157AB3 +:10FEE00053680AE00201561C9E5DA64203D10C3203 +:10FEF0009A588A4204D0401CC0B28542F2D8FF20F2 +:10FF000070BDF8B5CC4F3E7801F042FB0146FF2EA4 +:10FF100071D03401254678680835405900F083F9DE +:10FF200002280CD97868405901F025FB01F030FB1C +:10FF300001467868405900F076F902285BD8BE493E +:10FF40004868025D0A70A11C425C002A0CD0521E57 +:10FF5000425441590122D20589180902090A415126 +:10FF60003046FFF77FFF30E0631CC25C0092221D29 +:10FF700094468258002A10D001239B029A420FD93E +:10FF80009205920D43595703DB191B021B0A43517B +:10FF90006346C3589A1A920A09E0FF21C1540AE045 +:10FFA000435952039A181202120A42510022425433 +:10FFB0003046FFF757FFA0480C344168C2680098EC +:10FFC000095980001258009890479B4C2078FF28D0 +:10FFD00011D0000161680830085801F0CCFA01F036 +:10FFE000D7FA01462078626800010830105800F006 +:10FFF0001AF9022886D3F8BDF8B51C4615460E46F8 +:020000040001F9 +:100000000746FF2B03D38DA1D12002F05AFD8A4869 +:10001000FF21C760456004720674017000224270BF +:10002000104604E00201521C401CA954C0B2A04278 +:10003000F8D3F8BD70B5804C06466578207C8542C3 +:1000400003D37EA1E42002F03CFDE068A900465005 +:100050006078401C6070284670BDFFB581B01D46B9 +:10006000FF2401F095FA744F064679780198814291 +:1000700003D872A1F22002F024FD6F480021037A18 +:10008000406810E00A019446521C825CFF2A25D089 +:10009000019FBA4205D162460C328758029A9742B4 +:1000A0001ED0491CC9B28B42ECD8FF2C18D02101BC +:1000B0004A1C019B83540B460C33029AC250039B8B +:1000C0005D4F0022012B0ED00B1DC25001239B025D +:1000D0009D4216D9AA05920D08D008E00C46E0E72B +:1000E000FF2005B0F0BD0B1DC550EFE71A465303C6 +:1000F0009B190E461B0208361B0AAA1A8351920A44 +:1001000009E0002D00D101256B039B191D022D0A6A +:100110000B460833C550891C42543D463E78204664 +:10012000FFF7A0FE2878B04214D0000169680830BB +:10013000085801F020FA01F02BFA29786A680901C1 +:10014000083152580146104600F06DF8022801D2DD +:10015000FFF7D7FE0198C4E770B50C46054601F0DD +:1001600017FA064621462846FFF7B5FEFF2814D0A9 +:10017000314D04012046696808300858314600F0C6 +:1001800052F80121090340186968A41C095D400B5D +:10019000002901D08902081870BD002070BDF3B598 +:1001A00081B00F460198FFF796FEFF282AD0224E15 +:1001B0003578726829460C4604E0844205D025460D +:1001C0002301D45CFF2CF8D11CE0FF2C1AD0A542EF +:1001D0001CD10801105C3070FF2815D000010830D8 +:1001E000105801F0C8F901F0D3F90146307872686F +:1001F00000010830105800F016F8022806D2FFF768 +:1002000080FE03E00020FEBD01F0BDF939460198F3 +:10021000FFF7A2FF22017168FF23541C0B558A5C73 +:100220002B01CA54FEBD401A00020121000AC90573 +:10023000884200D900207047D81A00207372635C8E +:10024000736F635F74696D65722E6300F0B500248F +:100250001C4A01211C4B0803546018601B4B1C6096 +:100260001B4C20601B480469E443E406E61704695C +:10027000761C10252C430461174C6160174D2960D2 +:1002800000E020BF1F68002FFBD0002E03D10769BC +:100290001026B743076190688005906801D5104A21 +:1002A00010436960A160002119600121084A090317 +:1002B0001160F0BD10B50446FFF7C8FF20600020B4 +:1002C00010BD000000C5004080E100E000C100401A +:1002D00080E200E000ED00E000C3004000C000400C +:1002E00000FCFFFF70B51F490A68002A17D00023E1 +:1002F0001D4601244A68521C4A60092A00D34D60F9 +:100300000E792246B2400E6816420AD072B60B68C9 +:1003100093430B6062B649680160002070BD052000 +:1003200070BD5B1C092BE5D30FA1362002F0C9FB81 +:10033000F5E701201049800508607047EFF3108150 +:10034000CA07D20F72B601218140064803681943DB +:100350000160002A00D162B6EBE70248002101608B +:1003600041607047F40000207372635C736F635FD9 +:100370006576742E6300000000E200E00120810732 +:100380000860704701208107486070471048C068C6 +:10039000C00700D0012070470D488068C00700D01A +:1003A000012070470A484069C00700D0012070470B +:1003B0000748C069704706498A69D20306D589692A +:1003C0008907890F814201D10120704700207047C1 +:1003D00000040040F8B5FE4C607A217A88421BD0B8 +:1003E0000126FC4D0027207A215C14200A46424356 +:1003F0005019037C052B10D0062B19D0072B23D0C6 +:10040000437C012B2BD02120F3A1400102F059FBAA +:10041000617A207A8142E6D1F8BD0674207A401CC8 +:100420004007400F2072491CC8B2AA58022109E0B7 +:100430000674207A401C4007400F2072491CC8B245 +:10044000AA5803219047E3E70674207A401C40072E +:10045000400F2072491CC8B2AA580821F2E747741D +:10046000207A401C4007400F2072491CC8B2AA588D +:100470000721E7E770B5DB4D05202871DA48002435 +:1004800044700470183044720472D84801F003F9C3 +:10049000D7480474AC71D748611E41606C70847792 +:1004A000C4772C704477D448022104704470D34838 +:1004B000047528300470491EFAD10120F2F7DAF9E8 +:1004C0000020F2F7D7F90120A870F2F765F8CC48C0 +:1004D000F2F774F8CB4C2070CB48F2F76FF86070ED +:1004E000F2F76CF970BD10B5F2F793F9C54C2078AE +:1004F000F2F782F86078F2F77FF8BA4CE0780028DB +:1005000005D0FFF740FAF1F7A8FE0020E07010BD1B +:1005100070B5B44CA078002805D0FF20AEA1B23051 +:1005200002F0CFFA70BDA079002804D1FF20AAA163 +:10053000953002F0C6FA0125A5700026A671207933 +:10054000042114225043A34AAA4C80180174606805 +:10055000401C04D0481F60600120F2F78BF9002096 +:10056000F2F788F9F2F76CF9F2F773FAF2F7F8FAA2 +:10057000A1480078022804D0032804D1E07F002895 +:1005800001D0A57700E0A677F2F74FFA70BD0346D9 +:1005900090490420142242435218203A127F002A24 +:1005A00004D0401E0006000EF4D1704714224243CE +:1005B00051180A46403AD362012220390A7770471F +:1005C000012805D0032805D1002903D10020704758 +:1005D0000029FBD010B4874C00236377864A00289B +:1005E00090700CD002280AD007291AD20B007B4445 +:1005F0001B79DB189F441505070D0F111300D370ED +:1006000003E01B2000E03A20D0700120607710BC8E +:1006100070475820F8E77720F6E79620F4E7B520F2 +:10062000F2E710BC0020704710B573484078F2F72D +:1006300014FA80B210BD411E1422504310B5654A11 +:100640008418203C032902D8207F002803D162A10E +:100650006E4802F036FA207F012804D001205EA106 +:10066000400202F02EFA0020207710BD70B55E4CDB +:1006700060782178884201D1012500E00025F2F759 +:1006800088F9F2F7EAF961782278914201D10121E3 +:1006900000E00021A942EBD170BDF7B58CB0064651 +:1006A0000D98401EC1B20090029114204143494868 +:1006B0000D1828460195007C2D1D07282BD1444F8D +:1006C00000203C7A797AA14222D03A5D02998A428E +:1006D00007D1002803D040A14D4802F0F2F90120D3 +:1006E00001E0002804D0611C4907490F795C3955A5 +:1006F000641C6407797A640FA142E6D1002807D010 +:10070000787A002802D0787A401E00E007207872BC +:100710000199012008740099324C0D9803290FD8D3 +:10072000142148432B4940182038007F002807D067 +:100730000198007C012807D00E98C07A012807D0C4 +:1007400025A1344802F0BDF90E98C07A012839D1AC +:100750000198204B007C02280FD01D4C607A217A32 +:10076000401C4007400F884203D11BA12A4802F0D9 +:10077000A8F901990120487434E12079029A0146D0 +:10078000904206D0014614277843C018807C9042DE +:10079000F8D12279824208D1217914225143C91813 +:1007A000897C21710121617107E014224243D21832 +:1007B00014277943927CC9188A7414220521504366 +:1007C000C01881740E98007A06283BD226E00000FB +:1007D000D41B0020EC1A00207372635C72656D2ECE +:1007E00063000000001C0020BC1B0020071C002030 +:1007F000C01B0020E01B0020FE000020E81A0020A3 +:1008000003FF0000FC000020D5030100FF010000F1 +:10081000450200004E0200005B02000003007B4422 +:100820001B79DB189F44020C0A08060400200FE025 +:10083000B4200DE073200BE0322009E00A2007E02D +:10084000062005E0FF20F749443002F03AF9002085 +:1008500003900E98C07A02280E9824D0807A2872CD +:100860000E9803990068401A28600E99097A0029A9 +:1008700061D00221401A0002000A28600E98016827 +:10088000406808186860C01D0002000A68600E9881 +:100890000627407AA8720E98007A6872FFF776FDF4 +:1008A00000284AD053E04168007A00282DD0022069 +:1008B00009180398C01D09182079052827D0DA489F +:1008C000039A4078904200D81046801A4218D748C0 +:1008D000921D8446207914235843D54BC018436891 +:1008E00080689B1B801B1B0200021B0A000A9A42A5 +:1008F00004D8CE4A934201D8604508D92079142201 +:100900005043CB4A801880680CE00420D0E7C648EA +:10091000039A4078904200D81046801A8019801DB2 +:100920000002000A286040180002000A68600020E7 +:1009300028726868A7E704219CE7687A032806D232 +:10094000002804D0039838210F1A32200390B649AA +:100950000878012801D003280AD1487803998842F1 +:1009600006D9B449C97F002902D10399401AC71991 +:100970002968AE488B1B69681A02891B0591090218 +:10098000120A090A97421ED8074682421BD8B9426A +:1009900019D82079012205282FD0002001210491A7 +:1009A00021799C46059B14225143A14A89184A6823 +:1009B000921B9A4203D28A68921B62452BD800226E +:1009C0000AAF3A5430E0019905209B4C0874607AD4 +:1009D000217A401C4007400F884203D197A19A48D2 +:1009E00002F06FF8617A02986054607A401C400708 +:1009F000400F607200200FB0F0BD019802230299F1 +:100A000003742379052B00D02379837421716271DB +:100A100001200FB0F0BD01220AAF3A548A7BAF7AB1 +:100A2000BA4201D800220492897C401CC0B2052938 +:100A300003D0049A002AB6D1A1E00498002877D008 +:100A400025790520002704900AA8C05D012827D039 +:100A500004951420454376487F1C2818857CFFB2F6 +:100A6000052DF1D1019802230374714F20790528D7 +:100A700053D025790520049001984068811B1420EB +:100A80006843C0194268921B8A4262D92079A84201 +:100A90004FD1019902980B742279052A42D142E084 +:100AA0002079A8420BD121791420414360480818CD +:100AB000807C2071012060710020207011E004987A +:100AC000052803D15DA1614801F0FBFF28461421F0 +:100AD0004843574914234018827C049858434018CF +:100AE0008274284614214843514906224018027452 +:100AF0005148417A007A491C4907490F814203D184 +:100B00004EA1534801F0DDFF4B48417A4554417AEC +:100B1000491C4907490F41729BE7227901990298C4 +:100B2000052A00D022798A7420710120607123E0A7 +:100B300025E00498052803D140A1464801F0C1FFF3 +:100B4000049814225043C019029981740198857445 +:100B500012E0807C052807D0049505468FD137A187 +:100B60003D4801F0AEFF21E014214D43E919029800 +:100B7000887401990520887401200FB0F0BD019898 +:100B800005212D4C0174607A217A401C4007400FEA +:100B9000884203D129A1314801F093FF617A02987C +:100BA0006054607A401C4007400F607200200FB014 +:100BB000F0BD70B50D460646294900242046891B24 +:100BC000A04103D21DA1274801F07BFF2649002048 +:100BD000491BA04103D219A1244801F072FF244A05 +:100BE00070190021821A8C4101D32249401870BD2E +:100BF000F8B5401EC0B2142148430D494518687B22 +:100C000006283DD203007B441B79DB189F44023643 +:100C100034080604002067E0B4203AE0732038E08E +:100C2000322036E0D8070100FE000020FFFF3F0021 +:100C3000EC1A0020E01B0020D41B00207372635CC0 +:100C400072656D2E63000000A3020000DE0200004A +:100C5000E302000007030000170300001D0300006B +:100C6000FF7F841E290300000020A1072A03000043 +:100C70000080841E00807BE10A200AE0062008E054 +:100C8000FF20FE49443001F01CFF697B0020002951 +:100C90002AD0022140186968002440180C21000263 +:100CA0006956000A002921DBF1F7D7FEF44A06460F +:100CB0000C27EF570021101AA14103D2EF49F14848 +:100CC00001F0FFFEF0490020C91BA04103D2EB490F +:100CD000EE4801F0F6FEEE4AF0190021821A8C412E +:100CE00001D3EC494018F8BD0421D3E7F1F7B5FE74 +:100CF0000C21695600224018E149091AA241F2D29A +:100D00004042F8BDF0B5074683B0E3480E46029076 +:100D100000F0C9FCE14C00282ED0E14D287C0028D1 +:100D200003D0E0A1E24801F0CCFE012028742F732B +:100D3000DB4D30782872707868722A460A3229466C +:100D40007068F1F794FE0A2028560F2804DD1F383A +:100D5000A8722868401C28600021B0686A4600918B +:100D6000117101AA6946F1F782FE6A460420105605 +:100D70000F2846DD012045E060782178401C4007BF +:100D8000400F884203D1C7A1CA4801F09AFE60789B +:100D90000101C94809180F73617809010D183078ED +:100DA0002872707868722A460A3229467068F1F70C +:100DB0005EFE0A2028560F2804DD1F38A872286816 +:100DC000401C28600021B0686A460091117101AA98 +:100DD0006946F1F74CFE6A46042010560F2801DDE3 +:100DE000012000E00020009940186860307BE87224 +:100DF0006078401C4007400F6070029800F06BFC68 +:100E000005E00020009940186860307BE872607847 +:100E10002178884224D0A9480579052D22D0F1F700 +:100E2000B8FD14214D43A64969180A7C042A17D03D +:100E3000032A15D04B6889681B1A091A180209027F +:100E4000A04A000A090A06280AD31346904207D886 +:100E5000994205D860782178884201D0F1F7E5FD04 +:100E600003B0F0BD607821788842F7D103B0F0BDBF +:100E700010B50020F1F7EBFC10BD10B50120F1F723 +:100E8000E6FC10BDF8B5074602281ED08B4C207931 +:100E9000052803D183A18C4801F013FE0020A07027 +:100EA0000125A571207903211422854E5043801914 +:100EB0000174F1F7BFFD3800844F0BD001281FD01B +:100EC00003286FD077A1824838E082480078F1F794 +:100ED00099FBF8BD65700020F1F7CCFC7968481CDF +:100EE00004D0012300221846F1F7FAFC2079217979 +:100EF000401CC0B214225143725801219047F8BDE2 +:100F00000120F1F7B7FC607800280CD07868401C0D +:100F100009D020792179401CC0B214225143725863 +:100F200006219047F8BD387E01280AD0022812D049 +:100F3000032824D0042836D05AA1674801F0C1FD07 +:100F4000F8BD2078002804D000202070F1F777FD4C +:100F5000FD77002024E0E078002804D1FEF7F4FCBF +:100F6000F1F752F9E57020792179401CC0B21422C2 +:100F7000514372580021904700203876F8BD397AE5 +:100F800038680123411A00221846F1F7A9FC20789D +:100F9000002804D000202070F1F751FDFD770220D9 +:100FA0003876F8BD1AE0397F38680123411A0022EB +:100FB0001846F1F795FCE078002804D1FEF7C4FC50 +:100FC000F1F722F9E57020792179401CC0B2142292 +:100FD00051437258002190473D76F8BD2079217920 +:100FE000401CC0B214225143725805219047F8BDED +:100FF00010B5324C2079052803D12AA1374801F0D9 +:1010000060FD20792179401CC0B2142251432C4A42 +:1010100052580421904710BDF0B583B00526F1F772 +:10102000B8FC054629484068401C03D01DA12C4847 +:1010300001F047FD214C21792A480190052956D01D +:101040002179142041431E480918097C04294ED0F7 +:101050002179142251430818007C03287ED001987E +:10106000184902684068521B401B12020002120A13 +:10107000000A062A72D30B468A4235E03C0C010076 +:10108000FF7F841E290300000020A1072A0300001F +:101090000080841E00807BE1071C0020BC1B002018 +:1010A000C01B00207372635C72656D2E63000000CC +:1010B0006E0300005F0300003C1B0020001C0020AA +:1010C000EC1A0020FFFF3F00A2030000E01B0020FD +:1010D000F3030000FC000020E7030000FA03000017 +:1010E0002B040000EC1B002038D8984236D8002092 +:1010F00060702079052808D1F648407F002804D088 +:10110000F548C1784170817801702079052814D0A4 +:10111000207914214843F1494018007C04280CD15F +:1011200026792279012014235A4352181074227907 +:101130005A435118897C21716071E94F7878397868 +:10114000884215D038780101E6480A183978090133 +:101150000818017B2846FFF7A0FA00E071E1387813 +:10116000401C4007400F3870787839788842E9D1C0 +:10117000DD4F387C002806D0397B3A462846FFF7F9 +:101180008CFA00203874052E1BD0142031464143C0 +:10119000D2480818017C012913D10721D34F0174CB +:1011A000787A401C0840397A884203D1D0A1D348CC +:1011B00001F087FC787A3E54787A401C4007400F53 +:1011C0007872207905287DD0607900287BD00020B6 +:1011D0006071217914204143C048BE4F0E18C849A0 +:1011E000B3687268F6688E604B600A60797D00298A +:1011F00010D0022621791422B84851430818407BA8 +:10120000062815D203007B441B79DB189F44040E8B +:101210000C0A08060426EDE700200FE0B4200DE0DC +:1012200073200BE0322009E00A2007E0062005E0E9 +:10123000FF20AFA1443001F044FC00203872797DDA +:10124000022901D001290FD1F96809184A1B12029D +:10125000120A382A08D90320787532390802000AA0 +:10126000F860322038720AE0322808D2E07800288C +:101270000ED1FEF769FBF0F7C7FF012007E0E07829 +:10128000002805D0FEF77FFBF0F7E7FF0020E070B5 +:10129000914A0621507838771278012A01D0032A22 +:1012A00006D1012222703A7A904201D9811A891D11 +:1012B000BA7F002A00D0891C2378002B01D1002A94 +:1012C00061D001E088E098E08C468E490091019958 +:1012D0000B6849685B1B491B09021B02090A1B0AB0 +:1012E00001919C451CD8874DAB4219D8019B0099B0 +:1012F0008B4215D8397A884223D9FB68421A9A1A48 +:101300001202120A101880190002000AFA603860EE +:10131000002914D0032038760006000E3ED144E0A8 +:1013200000202070B877397A002925D0F868401855 +:1013300080190002000A3860022038762EE0012071 +:10134000E9E781420BD9FA68511889190902090A9B +:101350003960002801D00420DDE70220DBE7002A05 +:1013600003D163A1684801F0ACFBF8688019000262 +:10137000000A3860002004E0F96889190902090AA6 +:101380003960387611E0387A00281DD0F9680818DD +:1013900080190002000A386002203876F8680123BC +:1013A000811900221846F1F79BFA2079142148434D +:1013B0004A490C2240188256012300203968F1F76F +:1013C0008FFAF1F7C1FB18E0F86880190002000AF3 +:1013D000386000203876E8E70120F1F74BFA00206A +:1013E000F1F748FAF1F72CFAE078002805D0FEF77B +:1013F000CAFAF0F732FF0020E070364DA87F0028CF +:1014000004D0F1F71CFB0020E877A877687F00285C +:1014100004D03148C178417081780170207800286B +:1014200006D000202C49E8770978002900D12070E7 +:101430002E48417A007A814203D034484078F1F74F +:10144000E1F803B0F0BDF0B5314C0746207983B028 +:10145000052803D126A12F4801F033FB2079142160 +:101460001E4E48438019007C032803D020A12A483F +:1014700001F027FB174D6868401C03D01CA12748CA +:1014800001F01FFB20791421484381190C200856D4 +:1014900000216A4600911171C01901AA6946F1F74D +:1014A000E6FA6A46042010560F2801DD012000E00C +:1014B000002000994018296840180102090A696053 +:1014C0006078002804D0012300221846F1F708FABA +:1014D00003B0F0BDE01B0020FE000020EC1A00204D +:1014E000BC1B00203C1B0020C01B0020D41B002084 +:1014F0007372635C72656D2E630000005C04000013 +:10150000EC1B0020FFFF3F00AE040000FC000020A9 +:10151000001C00200B0500000C0500000D0500005C +:10152000F8B51D4D0A1A00242346551BA34106D3C6 +:10153000194E431A254600279E1BBD4101D2104675 +:10154000F8BD164E0025B21AA54103D2721C101A1E +:101550004018F8BD114D0022EB1AA24104D26A1CBA +:10156000511A08184042F8BD53200DA1000101F0A6 +:10157000A8FA0020F8BD10B5014601230022022080 +:10158000F1F7AEF910BD10B50220F1F773F910BDF7 +:1015900010B5F1F7FEF910BD0020A107FF7F841EF2 +:1015A0007372635C72656D2E6300000010B50146B6 +:1015B00020220A4801F0E8F808490020C8770846C8 +:1015C00010BD0749012048610648074A0168914259 +:1015D00001D100210160704770477047081C00204E +:1015E0000005004004010020EFBEADDE064A107089 +:1015F0005170704704481C2201784171427001709B +:101600007047704770477047080100207047704767 +:1016100070477047704770477047704730B5034652 +:10162000002002460DE09C5C2546303D0A2D02D389 +:101630000020C04330BD0A25684330382018521CB2 +:10164000D2B28A42EFD330BD70B50D46144608E0E1 +:101650000A2101F013F92A193031203A641ED1779A +:10166000E4B2002CF4D170BD10B5002310E0040AE0 +:1016700000020443A0B2CC5C44402006000F60404E +:101680000407240C44402006C00C60405B1C9BB245 +:101690009342ECD310BD002101700846704701460B +:1016A000002008707047EFF31081C907C90F72B6A8 +:1016B0000278012A01D0012200E0002201230370F8 +:1016C000002900D162B6002A01D000207047012015 +:1016D00040037047E7E7EFF31081C907C90F72B6FF +:1016E00000220270002900D162B600207047F2E7A4 +:1016F0000348004703480449024A034B704700006F +:10170000312B0100481C0020481C002010B5203857 +:101710000C46030001F0DAFA331B1F23272C313764 +:101720003C41474D5054585C606D71656974787CDC +:101730008084888C9094989C9FA2A6AAAEB2B8BCD4 +:10174000C0C5CACFE9F0F3D3D7E0DBE4F8002068E6 +:10175000FFF7A1FFD6E02068FFF7A5FFD2E02068E1 +:10176000FFF7B9FFCEE0207840B200F0F3F9C9E00E +:10177000207840B200F011FAC4E02078616840B2ED +:1017800000F024FABEE0207840B200F034FAB9E06C +:10179000207840B200F03FFAB4E02078217940B2DE +:1017A00000F04AFAAEE02078616840B200F074FAC6 +:1017B000A8E000F080FAA5E0206800F084FAA1E03B +:1017C000207800F099FA9DE02068FEF7BCF999E0D6 +:1017D0002068FEF7BCF995E021792068FEF7BEF994 +:1017E00090E02068FEF706F88CE02068FEF707F826 +:1017F00088E02078FEF707F884E0FEF715F881E02E +:101800002078FEF717F87DE02078FEF729F879E0D8 +:101810002068FEF742F875E02068FEF744F871E0B2 +:101820002068FEF746F86DE02068FEF747F869E0AB +:101830002068FEF749F865E02068FEF74BF861E0A4 +:101840002068FEF74CF85DE00846EEF77FFC59E0B3 +:10185000F0F7EDFC56E0F0F71AFD53E02068F0F7E2 +:1018600022FD4FE0206800F079FA4BE0206800F09C +:101870007BFA47E0206800F07CFA43E02078A26819 +:10188000616800F07BFA3DE0207800F083FA39E0EF +:10189000207800F08BFA35E02078616800F093FA48 +:1018A00030E02078616800F09AFA2BE02179207806 +:1018B00000F0ACFB26E02068FEF73FFA22E020684B +:1018C000FEF710FD1EE02068FEF7F4FC1AE020464B +:1018D00007C800F078FC15E0206800F0C0FC11E0BB +:1018E0006168206800F0E2FC0CE0206800F04EFE29 +:1018F00008E009E003E0FFE700F061FE02E0206895 +:1019000000F079FE206010BD0120086010BD0000CD +:1019100010B572B600F0E4F800280BD0EEF7C0FC6A +:10192000FEF7E1FD00F039FB72490020C8628862D1 +:101930007149086062B6002010BDF3B50025012092 +:101940000007C06A81B0C0430006000E0AD16B4890 +:101950000168491C05D000686949884202D069487D +:10196000FEBD012572B600F0BBF8002801D062B6BA +:1019700088E0EEF701FCEEF797FC634C634A002128 +:101980002368CB40DB0720D00346CB40DB0718D1D0 +:101990004BB2002B07DA1E07360F083EB608B6001A +:1019A000B618F66904E09E08594FB600F619366875 +:1019B0009B07DB0EDE4033069B0F012B05D0032B6C +:1019C00003D062B64F48401EFEBD491C2029D7D324 +:1019D000019C01204F49230001F078F914222424AE +:1019E0002424242424240B0D1012142016181A1C4D +:1019F0001E2F002400E00124C86314E00224FBE74A +:101A00000324F9E70424F7E70824F5E70924F3E7BA +:101A10000A24F1E70B24EFE70C24EDE70524EBE7BC +:101A2000072400E00624D06901210002000AC9074A +:101A30000843D061002D04D009E062B60120000304 +:101A4000FEBD2C4D3448E862EEF72EFCA8622A4910 +:101A500032480860324902980860EEF725FC2146BA +:101A600000F082FAFEF706FD00F04CFC00F0FEFAF2 +:101A70000198EEF7E3FB040062B603D0FFF748FFDE +:101A80002046FEBD0020FEBD10B5044600F028F83B +:101A9000002800D001202070002010BD21491848E6 +:101AA00008600020704710B50C46102808D0112897 +:101AB0000BD012280CD013280ED00120086010BDC6 +:101AC00061682068FFF739FF08E0FFF721FF05E0B4 +:101AD0002068FFF7D9FF01E0FFF7E0FF206010BDAD +:101AE00005480E490068884201D101207047002056 +:101AF00070470000000500400401002000100010A5 +:101B0000004001000210000000E100E000ED00E0F4 +:101B100000E400E04000004000200000EFBEADDE29 +:101B200010010020000000208107C90E002808DAFB +:101B30000007000F08388008814A80008018C069BB +:101B400004E080087F4A800080180068C8400006D2 +:101B5000800F704710B5044600F0DBF8002813D062 +:101B60002046FFF7E1FFC0B200F0E1F800280DD0F9 +:101B70007549E2060B78D20E01209040002B08D068 +:101B80004A681043486006E0704810BD6F48401C2A +:101B900010BD6F490860002010BD10B5044600F06C +:101BA000B8F800280BD06849E2060B78D20E012065 +:101BB0009040002B05D04A6882434A6004E06348A5 +:101BC00010BD634980310860002010BD70B50D461E +:101BD000044600F09EF800280BD05E480068E2063C +:101BE000D20E01219140084000D001202860002041 +:101BF00070BD564870BD10B5044600F08AF8002844 +:101C000007D0E106C90E0120884052490860002033 +:101C100010BD4E4810BD10B5044600F07AF80028FB +:101C200008D0E106C90E012088404A498031086089 +:101C3000002010BD454810BD70B50D46044600F0AB +:101C400068F8002819D0284600F071F8002816D04E +:101C5000A007C20EFF209040A907090E9140002C5A +:101C600010DA2207120F083A9308354A9B009B1896 +:101C7000DA6982430A43DA610CE0344870BD3348C4 +:101C8000401C70BDA3082F4A9B009B181A68824312 +:101C90000A431A60002070BD70B50C46054600F07E +:101CA00038F8002805D02846FFF73EFF20700020B6 +:101CB00070BD264870BDBFF34F8F21492648C860CC +:101CC000BFF34F8FFEE770B51F4C0546217801200A +:101CD00000290ED1207072B600F06EF91C4E8036CD +:101CE00031688143616000F067F9C043306062B6DB +:101CF00000202870002070BD13490A78002A06D001 +:101D0000002804D1124A48681060002008700020A2 +:101D1000704710B50446202805DA00F04DF901217E +:101D2000A140084201D0002010BD012010BD0128B3 +:101D300003D0032801D00020704701207047000025 +:101D400000ED00E000E400E01401002001200000AC +:101D500000E100E000E200E00400FA05364909680D +:101D6000C9B20160002070473349C0B2486000200A +:101D700070473149C0B2886000207047082801D3FD +:101D80002E4870472C4BC0001033C01801604260D1 +:101D900000207047022802D32848401C7047284979 +:101DA000C00040180121016000207047022802D3C2 +:101DB0002248401C70472249C000091D40180121DB +:101DC000016000207047022802D31C48401C704765 +:101DD0001C4A80008018C9B20160002070470228A8 +:101DE00002D31648401C7047164A800080180068CD +:101DF000C0B208600020704710B5FF200E49C043F4 +:101E000088600D4B082210330021D000C0180160FB +:101E10004160521C102AF8D30A4B00208200D218CD +:101E2000022801D3116002E01468E4B21460401C7F +:101E30000428F3D310BD000000F501400820000085 +:101E400000F0014000F80140F8B504468007002585 +:101E50000126002804DA5A48C563C6630220844379 +:101E6000E00404D55748C563C6638014844360000A +:101E700003D55548456080058443E00504D55348A3 +:101E8000C563C66380158443A00404D55048C56368 +:101E9000C6634014844360042704C00FF90F8842CE +:101EA00003D04CA1612000F00CFEB80F0AD04E49BF +:101EB000CD634E48C563C563CE63C663C663032066 +:101EC0008003844320050AD5494FFD632F20EEF798 +:101ED0006BF9FE632F20EEF767F9F8148443002CAA +:101EE00003DAFFF789FF640064084248044203D024 +:101EF00038A1902000F0E5FDF8BDF0B500210A46BC +:101F0000FF230446CC40E4072AD04CB2E606F60E86 +:101F10000125B540384E3560384E3560002C11DA59 +:101F200025072D0F083DAE08354DB6007619F56929 +:101F3000A407E70E1C46BC40A5431446BC402543FD +:101F4000F5610DE0A6082F4DB60076193568A40797 +:101F5000E70E1C46BC40A5431446BC4025433560F3 +:101F6000491C2029CDD3F0BD70B5274C0D4620600B +:101F7000FFF76AFF2068FFF7C0FF2846F0F720FA56 +:101F8000FDF7C6FEFDF772FDFFF736FFFDF7C5FC56 +:101F9000F0F702FB00F06AF870BD10B51A4C20682B +:101FA000FFF752FF2068FFF7A8FFFFF725FFF0F7C4 +:101FB0008CFA0020206010BD1348006870470000B4 +:101FC000C01F0040C0CF004000E50140C08F00406E +:101FD000C0DF00407372635C736F635F636F6E6634 +:101FE00069672E6300000000C0EF0040C0FF0040A2 +:101FF000C0BF0040FEFF0FFC80E100E080E200E097 +:1020000000ED00E000E400E01C01002070B50024B9 +:1020100002460D4620462146002A1ED0012A04D041 +:10202000022A04D0032A1ED103E0012002E002208C +:1020300013E003202B0000F049FE07160507090BEB +:102040000D0F1600012108E0022106E0032104E043 +:10205000042102E0052100E00621FEF7B1FA002884 +:1020600001D0204670BD0724FBE700009B490020FB +:10207000087088709A490870704770B5974C0E4682 +:102080006178884203D097A15A2000F01AFD0325F9 +:10209000330000F01BFE0953063030535353534AAC +:1020A00053002078022803D08EA15E2000F009FDA5 +:1020B0002570A078022802D0012804D014E0A0687E +:1020C00000F004FB10E000250BE0E0680168A06868 +:1020D00000F00DFBA068001DA060E068001D6D1CF5 +:1020E000E06020698542F0D30020A070FEF710FA6E +:1020F0000420207070BD2078022803D079A17620BA +:1021000000F0DFFC60687649401C6060032801D85D +:102110004D7003E0062806D80220487070496078A8 +:10212000FEF7F0FD70BD032003E0A0780028FAD18F +:102130000220FEF703F900F0C7F870BD69A19E20E8 +:1021400000F0BFFC70BD70B50546644C00206060B7 +:102150002078012803D063A1A52000F0B2FC6049DB +:10216000022008738D6003224A7020706078FEF7A9 +:10217000C9FD70BD10B5594CA078002802D1207857 +:10218000002801D0112010BD5A48FEF700FA6070F7 +:102190006078002803D001202070002010BD0320AB +:1021A00010BD10B50124020B64040121524BA04262 +:1021B00002D29140186802E0203A586891400840E5 +:1021C00000D0012010BDF8B50E46910005464F190C +:1021D00014463F1F009100F09CFA00998002891973 +:1021E000091FB14201D2012200E00022002C03D0DD +:1021F000FF2101318C4201D90920F8BD3F498D42B0 +:1022000019D3AF4217D3854205D2874203D228465D +:102210003043800701D01020F8BD8E420BD3002A36 +:1022200009D12846FFF7BDFF002804D13846FFF743 +:10223000B8FF002801D00F20F8BDFFF79BFF002852 +:10224000FAD126480121C66085600461817020466C +:10225000312148431430FFF776FF0020F8BD10B558 +:1022600004462648800A84420BD300F052FAA0426A +:1022700001D8102010BDA0020446FFF792FF0028ED +:1022800001D00F2010BDFFF775FF0028FAD11348C9 +:102290000221846081701A48FFF755FF002010BDAD +:1022A0001648010B01208840401E704700B50B46C0 +:1022B0000246FFF7F5FF104201D00F2000BD0E4887 +:1022C00002604360002000BD10B5044C6078FEF74A +:1022D000B2F900202070A07010BD00002001002085 +:1022E000281C00207372635C736F635F666C61739C +:1022F000682E63007B2001000006004000400100C2 +:1023000010540000E349002048700870887048604D +:10231000E1490873704710B5E048826A81158A4325 +:10232000DC498B691A438262826A0223C9699A4333 +:102330000A438262FEF7ECF810BD002814D0417801 +:10234000002901D001290ED18168D54A6439914212 +:1023500009D24068D349884205D8CE494978012935 +:1023600003D1002801D0002070470120704770B5CC +:102370000446FEF782FD0068002803D0CAA1802031 +:1023800000F09FFB0126C34D002C06D020780028CA +:102390002BD0012827D0022801D0EE7023E0287826 +:1023A000002820D16068FFF7C8FF0028F5D06068DA +:1023B0000078002800D00220B74E30706068806836 +:1023C0009630B06060684168E868FEF7F2FB7060C4 +:1023D000606803244078002808D07470AE49A8785B +:1023E000FEF790FC6C70FFF796FF70BD02207070D6 +:1023F000F4E7F8B5A74C0D46A178884203D0AAA10E +:10240000BF2000F05EFB284600270526A24D0300F2 +:1024100000F05CFC09061135587F8997B8A2B80016 +:102420006078032806D06078022803D09EA1C320DC +:1024300000F047FBF8BD6078032806D060780228DA +:1024400003D099A1C72000F03CFB04206070E77026 +:102450002078002802D0FEF75BF8F8BDA86896380F +:10246000FEF7F1FF6868E0608C48816A82151140D0 +:10247000A161806A02210840E06100205CE0607890 +:10248000032806D06078022803D087A1E22000F05C +:1024900018FB2078002802D000F0EFF8F8BD607833 +:1024A000032802D02069410020E004202DE07A4971 +:1024B000A078FEF727FCF8BD0420FDF73FFF0120C0 +:1024C0006070F8BD6078032807D06078022804D0D7 +:1024D000FF2075A1043000F0F4FA20780028DBD149 +:1024E0006078032810D06868A06076492161A068F0 +:1024F000FEF75FFB686069686069FFF711F868497B +:1025000063318842D8DCD2E70520FDF717FF6670FB +:10251000F8BD6078042804D0FF2063A1263000F0C5 +:10252000D0FA022008E06078042804D0FF205EA1E1 +:102530002B3000F0C6FA012061688847FFF717FFCB +:10254000F8BD6078042804D0FF2057A1303000F097 +:10255000B8FAFFF7E0FEF8BD6078042804D0FF2049 +:1025600051A1353000F0ADFA2078002894D1E07800 +:10257000002805D00620FDF7E1FE6670E770F8BD83 +:102580000720C2E7FF2048A14B3051E770B5050096 +:1025900005D0404C6078002803D0112070BD102079 +:1025A00070BD4948FDF7F3FFA070A078002804D063 +:1025B000656001206070002070BD032070BD10B503 +:1025C00034480178002901D0112010BD417800293C +:1025D0000BD0417805290AD04178012907D0012183 +:1025E00001704078052802D003E00F2010BD00F0F4 +:1025F00044F8002010BD70B5264C064660780528CA +:1026000004D06078012801D00F2070BD002E25D0A5 +:102610003046FFF792FE002822D060781E4D012838 +:1026200020D07168E068FEF7C4FA6860B068963040 +:10263000A8603078002800D0032028707078002827 +:1026400017D0032068706078052814D002206070CD +:102650001149A078FEF756FB002070BD102070BD18 +:10266000072070BDFEF702F86061A0601549216186 +:10267000D9E70220E6E70320E9E710B5054CA0788A +:10268000FDF7D9FF0820FDF759FE0020607020708B +:1026900010BD000034010020381C0020000500405F +:1026A0003D860100FF1FA1077372635C736F635F58 +:1026B000726164696F5F74696D65736C6F742E63AA +:1026C0000000000024080000F3230100134A022147 +:1026D000516013490B68002BFCD0906008680028FB +:1026E000FCD00020506008680028FCD0704710B56E +:1026F0000A4B01225A600A4A1468002CFCD001607F +:1027000010680028FCD00020586010680028FCD019 +:1027100010BD0120000740697047000000E501403E +:1027200000E40140704770477047704770470346A8 +:1027300010B50B439B070FD1042A0DD308C810C94D +:10274000121FA342F8D018BA21BA884201D9012039 +:1027500010BD0020C04310BD002A03D0D30703D012 +:10276000521C07E0002010BD03780C78401C491C67 +:102770001B1B07D103780C78401C491C1B1B01D183 +:10278000921EF1D1184610BDF8B5042A2CD3830748 +:1027900012D00B78491C0370401C521E83070BD0CB +:1027A0000B78491C0370401C521E830704D00B7821 +:1027B000491C0370401C521E8B079B0F05D0C91A81 +:1027C000DF002023DE1B08C90AE0EDF7FDFCF8BDA1 +:1027D0001D4608C9FD401C46B4402C4310C0121FC2 +:1027E000042AF5D2F308C91A521EF0D40B78491CFA +:1027F0000370401C521EEAD40B78491C0370401C25 +:10280000521EE4D409780170F8BD01E004C0091F2C +:102810000429FBD28B0701D50280801CC90700D098 +:102820000270704700290BD0C30702D00270401C11 +:10283000491E022904D3830702D50280801C891E09 +:10284000E3E70022EEE70022DFE70378C2781946CB +:10285000437812061B0219438378C0781B0419437E +:1028600011430902090A000608437047020A08706A +:102870004A70020C8A70020ECA7070470022030967 +:102880008B4273D3030A8B4258D3030B8B423CD346 +:10289000030C8B4221D312E003460B437FD400226A +:1028A00043088B4274D303098B425FD3030A8B42E4 +:1028B00044D3030B8B4228D3030C8B420DD3FF224E +:1028C000090212BA030C8B4202D31212090265D01C +:1028D000030B8B4219D300E0090AC30B8B4201D3CF +:1028E000CB03C01A5241830B8B4201D38B03C01A16 +:1028F0005241430B8B4201D34B03C01A5241030B8D +:102900008B4201D30B03C01A5241C30A8B4201D33D +:10291000CB02C01A5241830A8B4201D38B02C01AE8 +:102920005241430A8B4201D34B02C01A5241030A5F +:102930008B4201D30B02C01A5241CDD2C3098B4244 +:1029400001D3CB01C01A524183098B4201D38B01C1 +:10295000C01A524143098B4201D34B01C01A524164 +:1029600003098B4201D30B01C01A5241C3088B42A9 +:1029700001D3CB00C01A524183088B4201D38B0094 +:10298000C01A524143088B4201D34B00C01A524136 +:10299000411A00D201465241104670475DE0CA0F0D +:1029A00000D04942031000D34042534000229C46CD +:1029B00003098B422DD3030A8B4212D3FC228901D7 +:1029C00012BA030A8B420CD3890192118B4208D3AD +:1029D000890192118B4204D389013AD0921100E00F +:1029E0008909C3098B4201D3CB01C01A5241830923 +:1029F0008B4201D38B01C01A524143098B4201D350 +:102A00004B01C01A524103098B4201D30B01C01A7A +:102A10005241C3088B4201D3CB00C01A52418308F4 +:102A20008B4201D38B00C01A5241D9D243088B424A +:102A300001D34B00C01A5241411A00D201466346ED +:102A400052415B10104601D34042002B00D5494251 +:102A5000704763465B1000D3404201B50020C0467A +:102A6000C04602BD704770477047704710B500F010 +:102A700077F810BD30B58C180278401C13071B0F77 +:102A800001D10378401C120906D10278401C03E0F2 +:102A90000578401C0D70491C5B1EF9D101E00B70DC +:102AA000491C521EFBD1A142E6D3002030BD0000DC +:102AB00001231B68134B1860134B1960134B1A60EA +:102AC0007047134A134B13607246053AF0E7114AF8 +:102AD0000F4B1B689A420ED10D4B002018600198D5 +:102AE0000D4B04B598470CBC9E46024602980099CF +:102AF0000A4B1B68184706980599094B1B68DB6849 +:102B0000184700005C0100206001002064010020E3 +:102B100054010020EFBEADDEAD1501001001002014 +:102B2000000000200B4A12680B4B9A420AD1004762 +:102B3000084A1268084B9A4204D101B5FDF773F9AF +:102B400003BC8E4605490968EFF305808000014407 +:102B50000968084704010020EFBEADDE0000002038 +:102B60001C481D497047FFF7FBFFEDF7E7FA00BD72 +:102B700001200007C06AC0B2FF2804D117481849D5 +:102B80000968884202D0174817490160174A136044 +:102B90005B68184720BFFDE7154B1B680F4999423A +:102BA00002D018688842F5D004D1124B18680B493E +:102BB0008842EFD080F308880F49884204DD0F482F +:102BC000026802210A4302600D4880470D48804791 +:102BD0000D480047481C0020481C0020FFFFFFFF55 +:102BE000001000102C050040040000000000002030 +:102BF00014100010004001000020002024050040B7 +:102C0000C3150100712B0100B12A01001248704563 +:102C100002D1EFF3098101E0EFF3088188690238FE +:102C20000078102812DB20280EDB0C4A12680C4BAF +:102C30009A4203D1602804DB0A4A10470220086048 +:102C40007047094A10470000084A1047084A1268AE +:102C50002C32126810470000FDFFFFFF0401002026 +:102C6000EFBEADDEAD0200000D170100A71A010096 +:102C7000000000200A480B4908470B48094908474B +:102C80000A48084908470A480649084709480549C3 +:102C9000084709480349084708480249084700000F +:102CA000E1230000252B0100412B0000EB2900004F +:102CB000992900004D270000A72A000043260000A4 +:102CC00003B40148019001BD0500002030B47446F2 +:102CD000641E2578641CAB4200D21D46635D5B0018 +:102CE000E31830BC1847000002490020C8612039B1 +:102CF00008727047A003002000020206FFFFFFFFDA +:102D00000000FFFF0102040810204080555555D6F1 +:102D1000BE898E00F401FA00960064004B00320078 +:102D20001E0014000100030000000100000000006C +:102D3000000000000000000000000000870000000C +:102D4000000000000000000000000000000002037E +:102D5000040500000E0F0000882D01000400002073 +:102D60001000000004010000982D01001400002054 +:102D700054010000742A0100C02D010068010020E8 +:102D8000E01A0000200100000249022208681042F7 +:102D9000FCD0704700E200E0A1074E56FF9900CD3D +:102DA00029023501022B013601000100D83720FB32 +:102DB000349B5F8074800010027001E4B52A01002A +:020000041000EA +:1010000000400100FFFFFFFFFFFFFFFFFFFFFFFFAB +:041010004900FFFF95 +:04000005000000C136 +:00000001FF
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/softdevice_assert.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/softdevice_assert.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+
+/** @brief Utilities for verifying program logic
+ */
+
+#ifndef SOFTDEVICE_ASSERT_H_
+#define SOFTDEVICE_ASSERT_H_
+
+#include <stdint.h>
+
+/** @brief This function handles assertions.
+ *
+ *
+ * @note
+ * This function is called when an assertion has triggered.
+ *
+ *
+ * @param line_num The line number where the assertion is called
+ * @param file_name Pointer to the file name
+ */
+void assert_softdevice_callback(uint16_t line_num, const uint8_t *file_name);
+
+
+/*lint -emacro(506, ASSERT) */ /* Suppress "Constant value Boolean */
+/*lint -emacro(774, ASSERT) */ /* Suppress "Boolean within 'if' always evaluates to True" */ \
+/** @brief Check intended for production code
+ *
+ * Check passes if "expr" evaluates to true. */
+#define ASSERT(expr) \
+if (expr) \
+{ \
+} \
+else \
+{ \
+ assert_softdevice_callback((uint16_t)__LINE__, (uint8_t *)__FILE__); \
+ /*lint -unreachable */ \
+}
+
+#endif /* SOFTDEVICE_ASSERT_H_ */
diff -r 000000000000 -r 637031152314 mbed/TARGET_NRF51822/system_nrf51822.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TARGET_NRF51822/system_nrf51822.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,58 @@
+/* mbed Microcontroller Library
+
+ * Copyright (c) 2013 Nordic Semiconductor.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#ifndef SYSTEM_NRF51_H
+#define SYSTEM_NRF51_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+/**
+ * Initialize the system
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Setup the microcontroller system.
+ * Initialize the System and update the SystemCoreClock variable.
+ */
+extern void SystemInit (void);
+
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Updates the SystemCoreClock with current core Clock
+ * retrieved from cpu registers.
+ */
+extern void SystemCoreClockUpdate (void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SYSTEM_NRF51_H */
diff -r 000000000000 -r 637031152314 mbed/Ticker.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/Ticker.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,117 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TICKER_H
+#define MBED_TICKER_H
+
+#include "TimerEvent.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** A Ticker is used to call a function at a recurring interval
+ *
+ * You can use as many seperate Ticker objects as you require.
+ *
+ * Example:
+ * @code
+ * // Toggle the blinking led after 5 seconds
+ *
+ * #include "mbed.h"
+ *
+ * Ticker timer;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ *
+ * int flip = 0;
+ *
+ * void attime() {
+ * flip = !flip;
+ * }
+ *
+ * int main() {
+ * timer.attach(&attime, 5);
+ * while(1) {
+ * if(flip == 0) {
+ * led1 = !led1;
+ * } else {
+ * led2 = !led2;
+ * }
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class Ticker : public TimerEvent {
+
+public:
+
+ /** Attach a function to be called by the Ticker, specifiying the interval in seconds
+ *
+ * @param fptr pointer to the function to be called
+ * @param t the time between calls in seconds
+ */
+ void attach(void (*fptr)(void), float t) {
+ attach_us(fptr, t * 1000000.0f);
+ }
+
+ /** Attach a member function to be called by the Ticker, specifiying the interval in seconds
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param t the time between calls in seconds
+ */
+ template<typename T>
+ void attach(T* tptr, void (T::*mptr)(void), float t) {
+ attach_us(tptr, mptr, t * 1000000.0f);
+ }
+
+ /** Attach a function to be called by the Ticker, specifiying the interval in micro-seconds
+ *
+ * @param fptr pointer to the function to be called
+ * @param t the time between calls in micro-seconds
+ */
+ void attach_us(void (*fptr)(void), unsigned int t) {
+ _function.attach(fptr);
+ setup(t);
+ }
+
+ /** Attach a member function to be called by the Ticker, specifiying the interval in micro-seconds
+ *
+ * @param tptr pointer to the object to call the member function on
+ * @param mptr pointer to the member function to be called
+ * @param t the time between calls in micro-seconds
+ */
+ template<typename T>
+ void attach_us(T* tptr, void (T::*mptr)(void), unsigned int t) {
+ _function.attach(tptr, mptr);
+ setup(t);
+ }
+
+ /** Detach the function
+ */
+ void detach();
+
+protected:
+ void setup(unsigned int t);
+ virtual void handler();
+
+ unsigned int _delay;
+ FunctionPointer _function;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/Timeout.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/Timeout.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,59 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMEOUT_H
+#define MBED_TIMEOUT_H
+
+#include "Ticker.h"
+
+namespace mbed {
+
+/** A Timeout is used to call a function at a point in the future
+ *
+ * You can use as many seperate Timeout objects as you require.
+ *
+ * Example:
+ * @code
+ * // Blink until timeout.
+ *
+ * #include "mbed.h"
+ *
+ * Timeout timeout;
+ * DigitalOut led(LED1);
+ *
+ * int on = 1;
+ *
+ * void attimeout() {
+ * on = 0;
+ * }
+ *
+ * int main() {
+ * timeout.attach(&attimeout, 5);
+ * while(on) {
+ * led = !led;
+ * wait(0.2);
+ * }
+ * }
+ * @endcode
+ */
+class Timeout : public Ticker {
+
+protected:
+ virtual void handler();
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/Timer.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/Timer.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,88 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMER_H
+#define MBED_TIMER_H
+
+#include "platform.h"
+
+namespace mbed {
+
+/** A general purpose timer
+ *
+ * Example:
+ * @code
+ * // Count the time to toggle a LED
+ *
+ * #include "mbed.h"
+ *
+ * Timer timer;
+ * DigitalOut led(LED1);
+ * int begin, end;
+ *
+ * int main() {
+ * timer.start();
+ * begin = timer.read_us();
+ * led = !led;
+ * end = timer.read_us();
+ * printf("Toggle the led takes %d us", end - begin);
+ * }
+ * @endcode
+ */
+class Timer {
+
+public:
+ Timer();
+
+ /** Start the timer
+ */
+ void start();
+
+ /** Stop the timer
+ */
+ void stop();
+
+ /** Reset the timer to 0.
+ *
+ * If it was already counting, it will continue
+ */
+ void reset();
+
+ /** Get the time passed in seconds
+ */
+ float read();
+
+ /** Get the time passed in mili-seconds
+ */
+ int read_ms();
+
+ /** Get the time passed in micro-seconds
+ */
+ int read_us();
+
+#ifdef MBED_OPERATORS
+ operator float();
+#endif
+
+protected:
+ int slicetime();
+ int _running; // whether the timer is running
+ unsigned int _start; // the start time of the latest slice
+ int _time; // any accumulated time from previous slices
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/TimerEvent.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/TimerEvent.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,52 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMEREVENT_H
+#define MBED_TIMEREVENT_H
+
+#include "us_ticker_api.h"
+
+namespace mbed {
+
+/** Base abstraction for timer interrupts
+*/
+class TimerEvent {
+public:
+ TimerEvent();
+
+ /** The handler registered with the underlying timer interrupt
+ */
+ static void irq(uint32_t id);
+
+ /** Destruction removes it...
+ */
+ virtual ~TimerEvent();
+
+protected:
+ // The handler called to service the timer event of the derived class
+ virtual void handler() = 0;
+
+ // insert in to linked list
+ void insert(unsigned int timestamp);
+
+ // remove from linked list, if in it
+ void remove();
+
+ ticker_event_t event;
+};
+
+} // namespace mbed
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/analogin_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/analogin_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,39 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGIN_API_H
+#define MBED_ANALOGIN_API_H
+
+#include "device.h"
+
+#if DEVICE_ANALOGIN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct analogin_s analogin_t;
+
+void analogin_init (analogin_t *obj, PinName pin);
+float analogin_read (analogin_t *obj);
+uint16_t analogin_read_u16(analogin_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/analogout_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/analogout_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGOUT_API_H
+#define MBED_ANALOGOUT_API_H
+
+#include "device.h"
+
+#if DEVICE_ANALOGOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct dac_s dac_t;
+
+void analogout_init (dac_t *obj, PinName pin);
+void analogout_free (dac_t *obj);
+void analogout_write (dac_t *obj, float value);
+void analogout_write_u16(dac_t *obj, uint16_t value);
+float analogout_read (dac_t *obj);
+uint16_t analogout_read_u16 (dac_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/can_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/can_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,80 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_API_H
+#define MBED_CAN_API_H
+
+#include "device.h"
+
+#if DEVICE_CAN
+
+#include "PinNames.h"
+#include "PeripheralNames.h"
+#include "can_helper.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ IRQ_RX,
+ IRQ_TX,
+ IRQ_ERROR,
+ IRQ_OVERRUN,
+ IRQ_WAKEUP,
+ IRQ_PASSIVE,
+ IRQ_ARB,
+ IRQ_BUS,
+ IRQ_READY
+} CanIrqType;
+
+
+typedef enum {
+ MODE_RESET,
+ MODE_NORMAL,
+ MODE_SILENT,
+ MODE_TEST_GLOBAL,
+ MODE_TEST_LOCAL,
+ MODE_TEST_SILENT
+} CanMode;
+
+typedef void (*can_irq_handler)(uint32_t id, CanIrqType type);
+
+typedef struct can_s can_t;
+
+void can_init (can_t *obj, PinName rd, PinName td);
+void can_free (can_t *obj);
+int can_frequency(can_t *obj, int hz);
+
+void can_irq_init (can_t *obj, can_irq_handler handler, uint32_t id);
+void can_irq_free (can_t *obj);
+void can_irq_set (can_t *obj, CanIrqType irq, uint32_t enable);
+
+int can_write (can_t *obj, CAN_Message, int cc);
+int can_read (can_t *obj, CAN_Message *msg, int handle);
+int can_mode (can_t *obj, CanMode mode);
+int can_filter(can_t *obj, uint32_t id, uint32_t mask, CANFormat format, int32_t handle);
+void can_reset (can_t *obj);
+unsigned char can_rderror (can_t *obj);
+unsigned char can_tderror (can_t *obj);
+void can_monitor (can_t *obj, int silent);
+
+#ifdef __cplusplus
+};
+#endif
+
+#endif // MBED_CAN_API_H
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/can_helper.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/can_helper.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,53 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_HELPER_H
+#define MBED_CAN_HELPER_H
+
+#if DEVICE_CAN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+enum CANFormat {
+ CANStandard = 0,
+ CANExtended = 1,
+ CANAny = 2
+};
+typedef enum CANFormat CANFormat;
+
+enum CANType {
+ CANData = 0,
+ CANRemote = 1
+};
+typedef enum CANType CANType;
+
+struct CAN_Message {
+ unsigned int id; // 29 bit identifier
+ unsigned char data[8]; // Data field
+ unsigned char len; // Length of data field in bytes
+ CANFormat format; // 0 - STANDARD, 1- EXTENDED IDENTIFIER
+ CANType type; // 0 - DATA FRAME, 1 - REMOTE FRAME
+};
+typedef struct CAN_Message CAN_Message;
+
+#ifdef __cplusplus
+};
+#endif
+
+#endif
+
+#endif // MBED_CAN_HELPER_H
diff -r 000000000000 -r 637031152314 mbed/error.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/error.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ERROR_H
+#define MBED_ERROR_H
+
+/** To generate a fatal compile-time error, you can use the pre-processor #error directive.
+ *
+ * @code
+ * #error "That shouldn't have happened!"
+ * @endcode
+ *
+ * If the compiler evaluates this line, it will report the error and stop the compile.
+ *
+ * For example, you could use this to check some user-defined compile-time variables:
+ *
+ * @code
+ * #define NUM_PORTS 7
+ * #if (NUM_PORTS > 4)
+ * #error "NUM_PORTS must be less than 4"
+ * #endif
+ * @endcode
+ *
+ * Reporting Run-Time Errors:
+ * To generate a fatal run-time error, you can use the mbed error() function.
+ *
+ * @code
+ * error("That shouldn't have happened!");
+ * @endcode
+ *
+ * If the mbed running the program executes this function, it will print the
+ * message via the USB serial port, and then die with the blue lights of death!
+ *
+ * The message can use printf-style formatting, so you can report variables in the
+ * message too. For example, you could use this to check a run-time condition:
+ *
+ * @code
+ * if(x >= 5) {
+ * error("expected x to be less than 5, but got %d", x);
+ * }
+ * #endcode
+ */
+
+#include <stdlib.h>
+#include "device.h"
+
+#if DEVICE_STDIO_MESSAGES
+ #include <stdio.h>
+ #define error(...) (fprintf(stderr, __VA_ARGS__), exit(1))
+#else
+ #define error(...) (exit(1))
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/ethernet_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/ethernet_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,63 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ETHERNET_API_H
+#define MBED_ETHERNET_API_H
+
+#include "device.h"
+
+#if DEVICE_ETHERNET
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Connection constants
+
+int ethernet_init(void);
+void ethernet_free(void);
+
+// write size bytes from data to ethernet buffer
+// return num bytes written
+// or -1 if size is too big
+int ethernet_write(const char *data, int size);
+
+// send ethernet write buffer, returning the packet size sent
+int ethernet_send(void);
+
+// recieve from ethernet buffer, returning packet size, or 0 if no packet
+int ethernet_receive(void);
+
+// read size bytes in to data, return actual num bytes read (0..size)
+// if data == NULL, throw the bytes away
+int ethernet_read(char *data, int size);
+
+// get the ethernet address
+void ethernet_address(char *mac);
+
+// see if the link is up
+int ethernet_link(void);
+
+// force link settings
+void ethernet_set_link(int speed, int duplex);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
+
diff -r 000000000000 -r 637031152314 mbed/gpio_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/gpio_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,44 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_API_H
+#define MBED_GPIO_API_H
+
+#include "device.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Set the given pin as GPIO
+ * @param pin The pin to be set as GPIO
+ * @return The GPIO port mask for this pin
+ **/
+uint32_t gpio_set(PinName pin);
+
+/* GPIO object */
+void gpio_init (gpio_t *obj, PinName pin, PinDirection direction);
+
+void gpio_mode (gpio_t *obj, PinMode mode);
+void gpio_dir (gpio_t *obj, PinDirection direction);
+
+void gpio_write(gpio_t *obj, int value);
+int gpio_read (gpio_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/gpio_irq_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/gpio_irq_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_IRQ_API_H
+#define MBED_GPIO_IRQ_API_H
+
+#include "device.h"
+
+#if DEVICE_INTERRUPTIN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ IRQ_NONE,
+ IRQ_RISE,
+ IRQ_FALL
+} gpio_irq_event;
+
+typedef struct gpio_irq_s gpio_irq_t;
+
+typedef void (*gpio_irq_handler)(uint32_t id, gpio_irq_event event);
+
+int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id);
+void gpio_irq_free(gpio_irq_t *obj);
+void gpio_irq_set (gpio_irq_t *obj, gpio_irq_event event, uint32_t enable);
+void gpio_irq_enable(gpio_irq_t *obj);
+void gpio_irq_disable(gpio_irq_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/i2c_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/i2c_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,58 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_API_H
+#define MBED_I2C_API_H
+
+#include "device.h"
+
+#if DEVICE_I2C
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct i2c_s i2c_t;
+
+enum {
+ I2C_ERROR_NO_SLAVE = -1,
+ I2C_ERROR_BUS_BUSY = -2
+};
+
+void i2c_init (i2c_t *obj, PinName sda, PinName scl);
+void i2c_frequency (i2c_t *obj, int hz);
+int i2c_start (i2c_t *obj);
+int i2c_stop (i2c_t *obj);
+int i2c_read (i2c_t *obj, int address, char *data, int length, int stop);
+int i2c_write (i2c_t *obj, int address, const char *data, int length, int stop);
+void i2c_reset (i2c_t *obj);
+int i2c_byte_read (i2c_t *obj, int last);
+int i2c_byte_write (i2c_t *obj, int data);
+
+#if DEVICE_I2CSLAVE
+void i2c_slave_mode (i2c_t *obj, int enable_slave);
+int i2c_slave_receive(i2c_t *obj);
+int i2c_slave_read (i2c_t *obj, char *data, int length);
+int i2c_slave_write (i2c_t *obj, const char *data, int length);
+void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/mbed.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed/mbed.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_H +#define MBED_H + +#define MBED_LIBRARY_VERSION 30 + +#include "platform.h" + +// Useful C libraries +#include <math.h> +#include <time.h> + +// mbed Debug libraries +#include "error.h" +#include "mbed_interface.h" + +// mbed Peripheral components +#include "DigitalIn.h" +#include "DigitalOut.h" +#include "DigitalInOut.h" +#include "BusIn.h" +#include "BusOut.h" +#include "BusInOut.h" +#include "PortIn.h" +#include "PortInOut.h" +#include "PortOut.h" +#include "AnalogIn.h" +#include "AnalogOut.h" +#include "PwmOut.h" +#include "Serial.h" +#include "SPI.h" +#include "SPISlave.h" +#include "I2C.h" +#include "I2CSlave.h" +#include "Ethernet.h" +#include "CAN.h" +#include "RawSerial.h" + +// mbed Internal components +#include "Timer.h" +#include "Ticker.h" +#include "Timeout.h" +#include "LocalFileSystem.h" +#include "InterruptIn.h" +#include "wait_api.h" +#include "sleep_api.h" +#include "rtc_time.h" + +using namespace mbed; +using namespace std; + +#endif
diff -r 000000000000 -r 637031152314 mbed/mbed_debug.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/mbed_debug.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DEBUG_H
+#define MBED_DEBUG_H
+#include "device.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_STDIO_MESSAGES
+#include <stdio.h>
+#include <stdarg.h>
+
+/** Output a debug message
+ *
+ * @param format printf-style format string, followed by variables
+ */
+static inline void debug(const char *format, ...) {
+ va_list args;
+ va_start(args, format);
+ vfprintf(stderr, format, args);
+ va_end(args);
+}
+
+/** Conditionally output a debug message
+ *
+ * NOTE: If the condition is constant false (!= 1) and the compiler optimization
+ * level is greater than 0, then the whole function will be compiled away.
+ *
+ * @param condition output only if condition is true (== 1)
+ * @param format printf-style format string, followed by variables
+ */
+static inline void debug_if(int condition, const char *format, ...) {
+ if (condition == 1) {
+ va_list args;
+ va_start(args, format);
+ vfprintf(stderr, format, args);
+ va_end(args);
+ }
+}
+
+#else
+static inline void debug(const char *format, ...) {}
+static inline void debug_if(int condition, const char *format, ...) {}
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/mbed_interface.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/mbed_interface.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,114 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_INTERFACE_H
+#define MBED_INTERFACE_H
+
+#include "device.h"
+
+/* Mbed interface mac address
+ * if MBED_MAC_ADD_x are zero, interface uid sets mac address,
+ * otherwise MAC_ADD_x are used.
+ */
+#define MBED_MAC_ADDR_INTERFACE 0x00
+#define MBED_MAC_ADDR_0 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_1 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_2 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_3 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_4 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_5 MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDRESS_SUM (MBED_MAC_ADDR_0 | MBED_MAC_ADDR_1 | MBED_MAC_ADDR_2 | MBED_MAC_ADDR_3 | MBED_MAC_ADDR_4 | MBED_MAC_ADDR_5)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_SEMIHOST
+
+/** Functions to control the mbed interface
+ *
+ * mbed Microcontrollers have a built-in interface to provide functionality such as
+ * drag-n-drop download, reset, serial-over-usb, and access to the mbed local file
+ * system. These functions provide means to control the interface suing semihost
+ * calls it supports.
+ */
+
+/** Determine whether the mbed interface is connected, based on whether debug is enabled
+ *
+ * @returns
+ * 1 if interface is connected,
+ * 0 otherwise
+ */
+int mbed_interface_connected(void);
+
+/** Instruct the mbed interface to reset, as if the reset button had been pressed
+ *
+ * @returns
+ * 1 if successful,
+ * 0 otherwise (e.g. interface not present)
+ */
+int mbed_interface_reset(void);
+
+/** This will disconnect the debug aspect of the interface, so semihosting will be disabled.
+ * The interface will still support the USB serial aspect
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_disconnect(void);
+
+/** This will disconnect the debug aspect of the interface, and if the USB cable is not
+ * connected, also power down the interface. If the USB cable is connected, the interface
+ * will remain powered up and visible to the host
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_powerdown(void);
+
+/** This returns a string containing the 32-character UID of the mbed interface
+ * This is a weak function that can be overwritten if required
+ *
+ * @param uid A 33-byte array to write the null terminated 32-byte string
+ *
+ * @returns
+ * 0 if successful,
+ * -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_uid(char *uid);
+
+#endif
+
+/** This returns a unique 6-byte MAC address, based on the interface UID
+ * If the interface is not present, it returns a default fixed MAC address (00:02:F7:F0:00:00)
+ *
+ * This is a weak function that can be overwritten if you want to provide your own mechanism to
+ * provide a MAC address.
+ *
+ * @param mac A 6-byte array to write the MAC address
+ */
+void mbed_mac_address(char *mac);
+
+/** Cause the mbed to flash the BLOD (Blue LEDs Of Death) sequence
+ */
+void mbed_die(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/pinmap.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/pinmap.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,43 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINMAP_H
+#define MBED_PINMAP_H
+
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ int peripheral;
+ int function;
+} PinMap;
+
+void pin_function(PinName pin, int function);
+void pin_mode (PinName pin, PinMode mode);
+
+uint32_t pinmap_peripheral(PinName pin, const PinMap* map);
+uint32_t pinmap_merge (uint32_t a, uint32_t b);
+void pinmap_pinout (PinName pin, const PinMap *map);
+uint32_t pinmap_find_peripheral(PinName pin, const PinMap* map);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/platform.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed/platform.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,30 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PLATFORM_H +#define MBED_PLATFORM_H + +#define MBED_OPERATORS 1 + +#include "device.h" +#include "PinNames.h" +#include "PeripheralNames.h" + +#include <cstddef> +#include <cstdlib> +#include <cstdio> +#include <cstring> + +#endif
diff -r 000000000000 -r 637031152314 mbed/port_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/port_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTMAP_H
+#define MBED_PORTMAP_H
+
+#include "device.h"
+
+#if DEVICE_PORTIN || DEVICE_PORTOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct port_s port_t;
+
+PinName port_pin(PortName port, int pin_n);
+
+void port_init (port_t *obj, PortName port, int mask, PinDirection dir);
+void port_mode (port_t *obj, PinMode mode);
+void port_dir (port_t *obj, PinDirection dir);
+void port_write(port_t *obj, int value);
+int port_read (port_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/pwmout_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/pwmout_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PWMOUT_API_H
+#define MBED_PWMOUT_API_H
+
+#include "device.h"
+
+#if DEVICE_PWMOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct pwmout_s pwmout_t;
+
+void pwmout_init (pwmout_t* obj, PinName pin);
+void pwmout_free (pwmout_t* obj);
+
+void pwmout_write (pwmout_t* obj, float percent);
+float pwmout_read (pwmout_t* obj);
+
+void pwmout_period (pwmout_t* obj, float seconds);
+void pwmout_period_ms (pwmout_t* obj, int ms);
+void pwmout_period_us (pwmout_t* obj, int us);
+
+void pwmout_pulsewidth (pwmout_t* obj, float seconds);
+void pwmout_pulsewidth_ms(pwmout_t* obj, int ms);
+void pwmout_pulsewidth_us(pwmout_t* obj, int us);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/rtc_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/rtc_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_RTC_API_H
+#define MBED_RTC_API_H
+
+#include "device.h"
+
+#if DEVICE_RTC
+
+#include <time.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void rtc_init(void);
+void rtc_free(void);
+int rtc_isenabled(void);
+
+time_t rtc_read(void);
+void rtc_write(time_t t);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/rtc_time.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/rtc_time.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,74 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <time.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Implementation of the C time.h functions
+ *
+ * Provides mechanisms to set and read the current time, based
+ * on the microcontroller Real-Time Clock (RTC), plus some
+ * standard C manipulation and formating functions.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * int main() {
+ * set_time(1256729737); // Set RTC time to Wed, 28 Oct 2009 11:35:37
+ *
+ * while(1) {
+ * time_t seconds = time(NULL);
+ *
+ * printf("Time as seconds since January 1, 1970 = %d\n", seconds);
+ *
+ * printf("Time as a basic string = %s", ctime(&seconds));
+ *
+ * char buffer[32];
+ * strftime(buffer, 32, "%I:%M %p\n", localtime(&seconds));
+ * printf("Time as a custom formatted string = %s", buffer);
+ *
+ * wait(1);
+ * }
+ * }
+ * @endcode
+ */
+
+/** Set the current time
+ *
+ * Initialises and sets the time of the microcontroller Real-Time Clock (RTC)
+ * to the time represented by the number of seconds since January 1, 1970
+ * (the UNIX timestamp).
+ *
+ * @param t Number of seconds since January 1, 1970 (the UNIX timestamp)
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * int main() {
+ * set_time(1256729737); // Set time to Wed, 28 Oct 2009 11:35:37
+ * }
+ * @endcode
+ */
+void set_time(time_t t);
+
+#ifdef __cplusplus
+}
+#endif
diff -r 000000000000 -r 637031152314 mbed/semihost_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/semihost_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SEMIHOST_H
+#define MBED_SEMIHOST_H
+
+#include "device.h"
+#include "toolchain.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_SEMIHOST
+
+#ifndef __CC_ARM
+
+#if defined(__ICCARM__)
+inline int __semihost(int reason, const void *arg) {
+ return __semihosting(reason, (void*)arg);
+}
+#else
+
+#ifdef __thumb__
+# define AngelSWI 0xAB
+# define AngelSWIInsn "bkpt"
+# define AngelSWIAsm bkpt
+#else
+# define AngelSWI 0x123456
+# define AngelSWIInsn "swi"
+# define AngelSWIAsm swi
+#endif
+
+static inline int __semihost(int reason, const void *arg) {
+ int value;
+
+ asm volatile (
+ "mov r0, %1" "\n\t"
+ "mov r1, %2" "\n\t"
+ AngelSWIInsn " %a3" "\n\t"
+ "mov %0, r0"
+ : "=r" (value) /* output operands */
+ : "r" (reason), "r" (arg), "i" (AngelSWI) /* input operands */
+ : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" /* list of clobbered registers */
+ );
+
+ return value;
+}
+#endif
+#endif
+
+#if DEVICE_LOCALFILESYSTEM
+FILEHANDLE semihost_open(const char* name, int openmode);
+int semihost_close (FILEHANDLE fh);
+int semihost_read (FILEHANDLE fh, unsigned char* buffer, unsigned int length, int mode);
+int semihost_write (FILEHANDLE fh, const unsigned char* buffer, unsigned int length, int mode);
+int semihost_ensure(FILEHANDLE fh);
+long semihost_flen (FILEHANDLE fh);
+int semihost_seek (FILEHANDLE fh, long position);
+int semihost_istty (FILEHANDLE fh);
+
+int semihost_remove(const char *name);
+int semihost_rename(const char *old_name, const char *new_name);
+#endif
+
+int semihost_uid(char *uid);
+int semihost_reset(void);
+int semihost_vbus(void);
+int semihost_powerdown(void);
+int semihost_exit(void);
+
+int semihost_connected(void);
+int semihost_disabledebug(void);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/serial_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/serial_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,78 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIAL_API_H
+#define MBED_SERIAL_API_H
+
+#include "device.h"
+
+#if DEVICE_SERIAL
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ParityNone = 0,
+ ParityOdd = 1,
+ ParityEven = 2,
+ ParityForced1 = 3,
+ ParityForced0 = 4
+} SerialParity;
+
+typedef enum {
+ RxIrq,
+ TxIrq
+} SerialIrq;
+
+typedef enum {
+ FlowControlNone,
+ FlowControlRTS,
+ FlowControlCTS,
+ FlowControlRTSCTS
+} FlowControl;
+
+typedef void (*uart_irq_handler)(uint32_t id, SerialIrq event);
+
+typedef struct serial_s serial_t;
+
+void serial_init (serial_t *obj, PinName tx, PinName rx);
+void serial_free (serial_t *obj);
+void serial_baud (serial_t *obj, int baudrate);
+void serial_format (serial_t *obj, int data_bits, SerialParity parity, int stop_bits);
+
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id);
+void serial_irq_set (serial_t *obj, SerialIrq irq, uint32_t enable);
+
+int serial_getc (serial_t *obj);
+void serial_putc (serial_t *obj, int c);
+int serial_readable (serial_t *obj);
+int serial_writable (serial_t *obj);
+void serial_clear (serial_t *obj);
+
+void serial_break_set (serial_t *obj);
+void serial_break_clear(serial_t *obj);
+
+void serial_pinout_tx(PinName tx);
+
+void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/sleep_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/sleep_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,64 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SLEEP_API_H
+#define MBED_SLEEP_API_H
+
+#include "device.h"
+
+#if DEVICE_SLEEP
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Send the microcontroller to sleep
+ *
+ * The processor is setup ready for sleep, and sent to sleep using __WFI(). In this mode, the
+ * system clock to the core is stopped until a reset or an interrupt occurs. This eliminates
+ * dynamic power used by the processor, memory systems and buses. The processor, peripheral and
+ * memory state are maintained, and the peripherals continue to work and can generate interrupts.
+ *
+ * The processor can be woken up by any internal peripheral interrupt or external pin interrupt.
+ *
+ * @note
+ * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+void sleep(void);
+
+/** Send the microcontroller to deep sleep
+ *
+ * This processor is setup ready for deep sleep, and sent to sleep using __WFI(). This mode
+ * has the same sleep features as sleep plus it powers down peripherals and clocks. All state
+ * is still maintained.
+ *
+ * The processor can only be woken up by an external interrupt on a pin or a watchdog timer.
+ *
+ * @note
+ * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+void deepsleep(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/spi_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/spi_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,45 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPI_API_H
+#define MBED_SPI_API_H
+
+#include "device.h"
+
+#if DEVICE_SPI
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct spi_s spi_t;
+
+void spi_init (spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel);
+void spi_free (spi_t *obj);
+void spi_format (spi_t *obj, int bits, int mode, int slave);
+void spi_frequency (spi_t *obj, int hz);
+int spi_master_write (spi_t *obj, int value);
+int spi_slave_receive(spi_t *obj);
+int spi_slave_read (spi_t *obj);
+void spi_slave_write (spi_t *obj, int value);
+int spi_busy (spi_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/toolchain.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed/toolchain.h Sat Mar 07 16:23:41 2015 +0000 @@ -0,0 +1,35 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_TOOLCHAIN_H +#define MBED_TOOLCHAIN_H + +#if defined(TOOLCHAIN_ARM) +#include <rt_sys.h> +#endif + +#ifndef FILEHANDLE +typedef int FILEHANDLE; +#endif + +#if defined (__ICCARM__) +# define WEAK __weak +# define PACKED __packed +#else +# define WEAK __attribute__((weak)) +# define PACKED __attribute__((packed)) +#endif + +#endif
diff -r 000000000000 -r 637031152314 mbed/us_ticker_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/us_ticker_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_US_TICKER_API_H
+#define MBED_US_TICKER_API_H
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+uint32_t us_ticker_read(void);
+
+typedef void (*ticker_event_handler)(uint32_t id);
+void us_ticker_set_handler(ticker_event_handler handler);
+
+typedef struct ticker_event_s {
+ uint32_t timestamp;
+ uint32_t id;
+ struct ticker_event_s *next;
+} ticker_event_t;
+
+void us_ticker_init(void);
+void us_ticker_set_interrupt(unsigned int timestamp);
+void us_ticker_disable_interrupt(void);
+void us_ticker_clear_interrupt(void);
+void us_ticker_irq_handler(void);
+
+void us_ticker_insert_event(ticker_event_t *obj, unsigned int timestamp, uint32_t id);
+void us_ticker_remove_event(ticker_event_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff -r 000000000000 -r 637031152314 mbed/wait_api.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed/wait_api.h Sat Mar 07 16:23:41 2015 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_WAIT_API_H
+#define MBED_WAIT_API_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Generic wait functions.
+ *
+ * These provide simple NOP type wait capabilities.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * DigitalOut heartbeat(LED1);
+ *
+ * int main() {
+ * while (1) {
+ * heartbeat = 1;
+ * wait(0.5);
+ * heartbeat = 0;
+ * wait(0.5);
+ * }
+ * }
+ */
+
+/** Waits for a number of seconds, with microsecond resolution (within
+ * the accuracy of single precision floating point).
+ *
+ * @param s number of seconds to wait
+ */
+void wait(float s);
+
+/** Waits a number of milliseconds.
+ *
+ * @param ms the whole number of milliseconds to wait
+ */
+void wait_ms(int ms);
+
+/** Waits a number of microseconds.
+ *
+ * @param us the whole number of microseconds to wait
+ */
+void wait_us(int us);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif