Diff: Components/ft6x06/ft6x06.h

Revision:

0:0002c86c2220

diff -r 000000000000 -r 0002c86c2220 Components/ft6x06/ft6x06.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/ft6x06/ft6x06.h	Fri Dec 18 07:32:01 2015 +0000
@@ -0,0 +1,467 @@
+/**
+ ******************************************************************************
+ * @file    ft6x06.h
+ * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    03-August-2015
+ * @brief   This file contains all the functions prototypes for the
+ *          ft6x06.c IO expander driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *   1. Redistributions of source code must retain the above copyright notice,
+ *      this list of conditions and the following disclaimer.
+ *   2. Redistributions in binary form must reproduce the above copyright notice,
+ *      this list of conditions and the following disclaimer in the documentation
+ *      and/or other materials provided with the distribution.
+ *   3. Neither the name of STMicroelectronics nor the names of its contributors
+ *      may be used to endorse or promote products derived from this software
+ *      without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __FT6X06_H
+#define __FT6X06_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Set Multi-touch as non supported */
+#ifndef TS_MULTI_TOUCH_SUPPORTED
+  #define TS_MULTI_TOUCH_SUPPORTED 0
+#endif
+
+/* Set Auto-calibration as non supported */  
+#ifndef TS_AUTO_CALIBRATION_SUPPORTED
+  #define TS_AUTO_CALIBRATION_SUPPORTED 0
+#endif
+  
+/* Includes ------------------------------------------------------------------*/
+#include "../Common/ts.h"
+
+/* Macros --------------------------------------------------------------------*/
+
+/** @typedef ft6x06_handle_TypeDef
+ *  ft6x06 Handle definition.
+ */
+typedef struct
+{
+  uint8_t i2cInitialized;
+
+  /* field holding the current number of simultaneous active touches */
+  uint8_t currActiveTouchNb;
+
+  /* field holding the touch index currently managed */
+  uint8_t currActiveTouchIdx;
+
+} ft6x06_handle_TypeDef;
+
+  /** @addtogroup BSP
+   * @{
+   */
+
+  /** @addtogroup Component
+   * @{
+   */
+
+  /** @defgroup FT6X06
+   * @{
+   */
+
+  /* Exported types ------------------------------------------------------------*/
+
+  /** @defgroup FT6X06_Exported_Types
+   * @{
+   */
+
+  /* Exported constants --------------------------------------------------------*/
+
+  /** @defgroup FT6X06_Exported_Constants
+   * @{
+   */
+
+  /* Maximum border values of the touchscreen pad */
+#define  FT_6206_MAX_WIDTH              ((uint16_t)800)     /* Touchscreen pad max width   */
+#define  FT_6206_MAX_HEIGHT             ((uint16_t)480)     /* Touchscreen pad max height  */
+
+  /* Possible values of driver functions return status */
+#define FT6206_STATUS_OK                0
+#define FT6206_STATUS_NOT_OK            1
+
+  /* Possible values of global variable 'TS_I2C_Initialized' */
+#define FT6206_I2C_NOT_INITIALIZED      0
+#define FT6206_I2C_INITIALIZED          1
+
+  /* Max detectable simultaneous touches */
+#define FT6206_MAX_DETECTABLE_TOUCH     2
+
+  /**
+   * @brief : Definitions for FT6206 I2C register addresses on 8 bit
+   **/
+
+  /* Current mode register of the FT6206 (R/W) */
+#define FT6206_DEV_MODE_REG             0x00
+
+  /* Possible values of FT6206_DEV_MODE_REG */
+#define FT6206_DEV_MODE_WORKING         0x00
+#define FT6206_DEV_MODE_FACTORY         0x04
+
+#define FT6206_DEV_MODE_MASK            0x7
+#define FT6206_DEV_MODE_SHIFT           4
+
+  /* Gesture ID register */
+#define FT6206_GEST_ID_REG              0x01
+
+  /* Possible values of FT6206_GEST_ID_REG */
+#define FT6206_GEST_ID_NO_GESTURE       0x00
+#define FT6206_GEST_ID_MOVE_UP          0x10
+#define FT6206_GEST_ID_MOVE_RIGHT       0x14
+#define FT6206_GEST_ID_MOVE_DOWN        0x18
+#define FT6206_GEST_ID_MOVE_LEFT        0x1C
+#define FT6206_GEST_ID_ZOOM_IN          0x48
+#define FT6206_GEST_ID_ZOOM_OUT         0x49
+
+  /* Touch Data Status register : gives number of active touch points (0..2) */
+#define FT6206_TD_STAT_REG              0x02
+
+  /* Values related to FT6206_TD_STAT_REG */
+#define FT6206_TD_STAT_MASK             0x0F
+#define FT6206_TD_STAT_SHIFT            0x00
+
+  /* Values Pn_XH and Pn_YH related */
+#define FT6206_TOUCH_EVT_FLAG_PRESS_DOWN 0x00
+#define FT6206_TOUCH_EVT_FLAG_LIFT_UP    0x01
+#define FT6206_TOUCH_EVT_FLAG_CONTACT    0x02
+#define FT6206_TOUCH_EVT_FLAG_NO_EVENT   0x03
+
+#define FT6206_TOUCH_EVT_FLAG_SHIFT     6
+#define FT6206_TOUCH_EVT_FLAG_MASK      (3 << FT6206_TOUCH_EVT_FLAG_SHIFT)
+
+#define FT6206_MSB_MASK                 0x0F
+#define FT6206_MSB_SHIFT                0
+
+  /* Values Pn_XL and Pn_YL related */
+#define FT6206_LSB_MASK                 0xFF
+#define FT6206_LSB_SHIFT                0
+
+#define FT6206_P1_XH_REG                0x03
+#define FT6206_P1_XL_REG                0x04
+#define FT6206_P1_YH_REG                0x05
+#define FT6206_P1_YL_REG                0x06
+
+  /* Touch Pressure register value (R) */
+#define FT6206_P1_WEIGHT_REG            0x07
+
+  /* Values Pn_WEIGHT related  */
+#define FT6206_TOUCH_WEIGHT_MASK        0xFF
+#define FT6206_TOUCH_WEIGHT_SHIFT       0
+
+  /* Touch area register */
+#define FT6206_P1_MISC_REG              0x08
+
+  /* Values related to FT6206_Pn_MISC_REG */
+#define FT6206_TOUCH_AREA_MASK         (0x04 << 4)
+#define FT6206_TOUCH_AREA_SHIFT        0x04
+
+#define FT6206_P2_XH_REG               0x09
+#define FT6206_P2_XL_REG               0x0A
+#define FT6206_P2_YH_REG               0x0B
+#define FT6206_P2_YL_REG               0x0C
+#define FT6206_P2_WEIGHT_REG           0x0D
+#define FT6206_P2_MISC_REG             0x0E
+
+  /* Threshold for touch detection */
+#define FT6206_TH_GROUP_REG            0x80
+
+  /* Values FT6206_TH_GROUP_REG : threshold related  */
+#define FT6206_THRESHOLD_MASK          0xFF
+#define FT6206_THRESHOLD_SHIFT         0
+
+  /* Filter function coefficients */
+#define FT6206_TH_DIFF_REG             0x85
+
+  /* Control register */
+#define FT6206_CTRL_REG                0x86
+
+  /* Values related to FT6206_CTRL_REG */
+
+  /* Will keep the Active mode when there is no touching */
+#define FT6206_CTRL_KEEP_ACTIVE_MODE    0x00
+
+  /* Switching from Active mode to Monitor mode automatically when there is no touching */
+#define FT6206_CTRL_KEEP_AUTO_SWITCH_MONITOR_MODE  0x01
+
+  /* The time period of switching from Active mode to Monitor mode when there is no touching */
+#define FT6206_TIMEENTERMONITOR_REG     0x87
+
+  /* Report rate in Active mode */
+#define FT6206_PERIODACTIVE_REG         0x88
+
+  /* Report rate in Monitor mode */
+#define FT6206_PERIODMONITOR_REG        0x89
+
+  /* The value of the minimum allowed angle while Rotating gesture mode */
+#define FT6206_RADIAN_VALUE_REG         0x91
+
+  /* Maximum offset while Moving Left and Moving Right gesture */
+#define FT6206_OFFSET_LEFT_RIGHT_REG    0x92
+
+  /* Maximum offset while Moving Up and Moving Down gesture */
+#define FT6206_OFFSET_UP_DOWN_REG       0x93
+
+  /* Minimum distance while Moving Left and Moving Right gesture */
+#define FT6206_DISTANCE_LEFT_RIGHT_REG  0x94
+
+  /* Minimum distance while Moving Up and Moving Down gesture */
+#define FT6206_DISTANCE_UP_DOWN_REG     0x95
+
+  /* Maximum distance while Zoom In and Zoom Out gesture */
+#define FT6206_DISTANCE_ZOOM_REG        0x96
+
+  /* High 8-bit of LIB Version info */
+#define FT6206_LIB_VER_H_REG            0xA1
+
+  /* Low 8-bit of LIB Version info */
+#define FT6206_LIB_VER_L_REG            0xA2
+
+  /* Chip Selecting */
+#define FT6206_CIPHER_REG               0xA3
+
+  /* Interrupt mode register (used when in interrupt mode) */
+#define FT6206_GMODE_REG                0xA4
+
+#define FT6206_G_MODE_INTERRUPT_MASK    0x03
+#define FT6206_G_MODE_INTERRUPT_SHIFT   0x00
+
+  /* Possible values of FT6206_GMODE_REG */
+#define FT6206_G_MODE_INTERRUPT_POLLING 0x00
+#define FT6206_G_MODE_INTERRUPT_TRIGGER 0x01
+
+  /* Current power mode the FT6206 system is in (R) */
+#define FT6206_PWR_MODE_REG             0xA5
+
+  /* FT6206 firmware version */
+#define FT6206_FIRMID_REG               0xA6
+
+  /* FT6206 Chip identification register */
+#define FT6206_CHIP_ID_REG              0xA8
+
+  /*  Possible values of FT6206_CHIP_ID_REG */
+#define FT6206_ID_VALUE                 0x11
+
+  /* Release code version */
+#define FT6206_RELEASE_CODE_ID_REG      0xAF
+
+  /* Current operating mode the FT6206 system is in (R) */
+#define FT6206_STATE_REG                0xBC
+
+  /**
+   * @}
+   */
+
+  /* Exported macro ------------------------------------------------------------*/
+
+  /** @defgroup ft6x06_Exported_Macros
+   * @{
+   */
+
+  /* Exported functions --------------------------------------------------------*/
+
+  /** @defgroup ft6x06_Exported_Functions
+   * @{
+   */
+
+  /**
+   * @brief ft6x06 Control functions
+   */
+
+
+/**
+ * @brief  Initialize the ft6x06 communication bus
+ *         from MCU to FT6206 : ie I2C channel initialization (if required).
+ * @param  DeviceAddr: Device address on communication Bus (I2C slave address of FT6206).
+ * @retval None
+ */
+void ft6x06_Init(uint16_t DeviceAddr);
+
+/**
+ * @brief  Software Reset the ft6x06.
+ * @param  DeviceAddr: Device address on communication Bus (I2C slave address of FT6206).
+ * @retval None
+ */
+void ft6x06_Reset(uint16_t DeviceAddr);
+
+/**
+ * @brief  Read the ft6x06 device ID, pre intitalize I2C in case of need to be
+ *         able to read the FT6206 device ID, and verify this is a FT6206.
+ * @param  DeviceAddr: I2C FT6x06 Slave address.
+ * @retval The Device ID (two bytes).
+ */
+uint16_t ft6x06_ReadID(uint16_t DeviceAddr);
+
+/**
+ * @brief  Configures the touch Screen IC device to start detecting touches
+ * @param  DeviceAddr: Device address on communication Bus (I2C slave address).
+ * @retval None.
+ */
+void ft6x06_TS_Start(uint16_t DeviceAddr);
+
+/**
+ * @brief  Return if there is touches detected or not.
+ *         Try to detect new touches and forget the old ones (reset internal global
+ *         variables).
+ * @param  DeviceAddr: Device address on communication Bus.
+ * @retval : Number of active touches detected (can be 0, 1 or 2).
+ */
+uint8_t ft6x06_TS_DetectTouch(uint16_t DeviceAddr);
+
+/**
+ * @brief  Get the touch screen X and Y positions values
+ *         Manage multi touch thanks to touch Index global
+ *         variable 'ft6x06_handle.currActiveTouchIdx'.
+ * @param  DeviceAddr: Device address on communication Bus.
+ * @param  X: Pointer to X position value
+ * @param  Y: Pointer to Y position value
+ * @retval None.
+ */
+void ft6x06_TS_GetXY(uint16_t DeviceAddr, uint16_t *X, uint16_t *Y);
+
+/**
+ * @brief  Configure the FT6206 device to generate IT on given INT pin
+ *         connected to MCU as EXTI.
+ * @param  DeviceAddr: Device address on communication Bus (Slave I2C address of FT6206).
+ * @retval None
+ */
+void ft6x06_TS_EnableIT(uint16_t DeviceAddr);
+
+/**
+ * @brief  Configure the FT6206 device to stop generating IT on the given INT pin
+ *         connected to MCU as EXTI.
+ * @param  DeviceAddr: Device address on communication Bus (Slave I2C address of FT6206).
+ * @retval None
+ */
+void ft6x06_TS_DisableIT(uint16_t DeviceAddr);
+
+/**
+ * @brief  Get IT status from FT6206 interrupt status registers
+ *         Should be called Following an EXTI coming to the MCU to know the detailed
+ *         reason of the interrupt.
+ * @param  DeviceAddr: Device address on communication Bus (I2C slave address of FT6206).
+ * @retval TS interrupts status
+ */
+uint8_t ft6x06_TS_ITStatus (uint16_t DeviceAddr);
+
+/**
+ * @brief  Clear IT status in FT6206 interrupt status clear registers
+ *         Should be called Following an EXTI coming to the MCU.
+ * @param  DeviceAddr: Device address on communication Bus (I2C slave address of FT6206).
+ * @retval TS interrupts status
+ */
+void ft6x06_TS_ClearIT (uint16_t DeviceAddr);
+
+/**** NEW FEATURES enabled when Multi-touch support is enabled ****/
+
+#if (TS_MULTI_TOUCH_SUPPORTED == 1)
+
+/**
+ * @brief  Get the last touch gesture identification (zoom, move up/down...).
+ * @param  DeviceAddr: Device address on communication Bus (I2C slave address of FT6x06).
+ * @param  pGestureId : Pointer to get last touch gesture Identification.
+ * @retval None.
+ */
+void ft6x06_TS_GetGestureID(uint16_t DeviceAddr, uint32_t * pGestureId);
+
+/**
+ * @brief  Get the touch detailed informations on touch number 'touchIdx' (0..1)
+ *         This touch detailed information contains :
+ *         - weight that was applied to this touch
+ *         - sub-area of the touch in the touch panel
+ *         - event of linked to the touch (press down, lift up, ...)
+ * @param  DeviceAddr: Device address on communication Bus (I2C slave address of FT6x06).
+ * @param  touchIdx : Passed index of the touch (0..1) on which we want to get the
+ *                    detailed information.
+ * @param  pWeight : Pointer to to get the weight information of 'touchIdx'.
+ * @param  pArea   : Pointer to to get the sub-area information of 'touchIdx'.
+ * @param  pEvent  : Pointer to to get the event information of 'touchIdx'.
+
+ * @retval None.
+ */
+void ft6x06_TS_GetTouchInfo(uint16_t   DeviceAddr,
+                            uint32_t   touchIdx,
+                            uint32_t * pWeight,
+                            uint32_t * pArea,
+                            uint32_t * pEvent);
+
+#endif /* TS_MULTI_TOUCH_SUPPORTED == 1 */
+
+/* Imported TS IO functions --------------------------------------------------------*/
+
+/** @defgroup ft6x06_Imported_Functions
+ * @{
+ */
+
+/* TouchScreen (TS) external IO functions */
+extern void     TS_IO_Init(void);
+extern void     TS_IO_Write(uint8_t Addr, uint8_t Reg, uint8_t Value);
+extern uint8_t  TS_IO_Read(uint8_t Addr, uint8_t Reg);
+extern uint16_t TS_IO_ReadMultiple(uint8_t Addr, uint8_t Reg, uint8_t *Buffer, uint16_t Length);
+extern void     TS_IO_Delay(uint32_t Delay);
+
+  /**
+   * @}
+   */
+
+  /* Imported global variables --------------------------------------------------------*/
+
+  /** @defgroup ft6x06_Imported_Globals
+   * @{
+   */
+
+
+/* Touch screen driver structure */
+extern TS_DrvTypeDef ft6x06_ts_drv;
+
+  /**
+   * @}
+   */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* __FT6X06_H */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/