Karl Zweimüller / UniGraphic

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependents:   UniGraphic-St7920-Test AfficheurUTILECO

Fork of UniGraphic by GraphicsDisplay

Embed: (wiki syntax)

« Back to documentation index

SPI8 Class Reference
Public Member Functions | Protected Member Functions

SPI8 Class Reference

SPI 8bit interface. More...

#include <SPI8.h>

Inherits Protocols.

Public Member Functions

 SPI8 (int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC=NC)
 Create an SPI 8bit display interface with 3 control pins.

Protected Member Functions

virtual void wr_cmd8 (unsigned char cmd)
 Send 8bit command to display controller.
virtual void wr_data8 (unsigned char data)
 Send 8bit data to display controller.
virtual void wr_cmd16 (unsigned short cmd)
 Send 2x8bit command to display controller.
virtual void wr_data16 (unsigned short data)
 Send 2x8bit data to display controller.
virtual void wr_gram (unsigned short data)
 Send 16bit pixeldata to display controller.
virtual void wr_gram (unsigned short data, unsigned int count)
 Send same 16bit pixeldata to display controller multiple times.
virtual void wr_grambuf (unsigned short *data, unsigned int lenght)
 Send array of pixeldata shorts to display controller.
virtual unsigned short rd_gram (bool convert)
 Read 16bit pixeldata from display controller (with dummy cycle)
virtual unsigned int rd_reg_data32 (unsigned char reg)
 Read 4x8bit register data (with dummy cycle)
virtual unsigned int rd_extcreg_data32 (unsigned char reg, unsigned char SPIreadenablecmd)
 Read 3x8bit ExtendedCommands register data.
virtual void dummyread ()
 ILI932x specific, does a dummy read cycle, number of bits is protocol dependent for PAR protocols: a signle RD bit toggle for SPI8: 8clocks for SPI16: 16 clocks.
virtual void reg_select (unsigned char reg, bool forread=false)
 ILI932x specific, select register for a successive write or read.
virtual void reg_write (unsigned char reg, unsigned short data)
 ILI932x specific, write register with data.
virtual unsigned short reg_read (unsigned char reg)
 ILI932x specific, read register.
virtual void hw_reset ()
 HW reset sequence (without display init commands)
virtual void BusEnable (bool enable)
 Set ChipSelect high or low.

Detailed Description

SPI 8bit interface.

Definition at line 12 of file SPI8.h.

Constructor & Destructor Documentation

SPI8 ( int  Hz,
PinName  mosi,
PinName  miso,
PinName  sclk,
PinName  CS,
PinName  reset,
PinName  DC = NC 
)

Create an SPI 8bit display interface with 3 control pins.

Parameters:
SPImosi
SPImiso
SPIsclk
CSpin connected to CS of display
resetpin connected to RESET of display
DCpin connected to data/command of display

Definition at line 22 of file SPI8.cpp.

Member Function Documentation

void BusEnable ( bool  enable ) [protected, virtual]

Set ChipSelect high or low.

Parameters:
enable0/1

Implements Protocols.

Definition at line 205 of file SPI8.cpp.

void dummyread (  ) [protected, virtual]

ILI932x specific, does a dummy read cycle, number of bits is protocol dependent for PAR protocols: a signle RD bit toggle for SPI8: 8clocks for SPI16: 16 clocks.

Implements Protocols.

Definition at line 146 of file SPI8.cpp.

void hw_reset (  ) [protected, virtual]

HW reset sequence (without display init commands)

Implements Protocols.

Definition at line 195 of file SPI8.cpp.

unsigned int rd_extcreg_data32 ( unsigned char  reg,
unsigned char  SPIreadenablecmd 
) [protected, virtual]

Read 3x8bit ExtendedCommands register data.

Parameters:
regthe register to read
SPIreadenablecmdvendor/device specific cmd to read EXTC registers
Returns:
data as uint
Note:
EXTC regs (0xB0 to 0xFF) are read/write registers but needs special cmd to be read in SPI mode

Implements Protocols.

Definition at line 129 of file SPI8.cpp.

unsigned short rd_gram ( bool  convert ) [protected, virtual]

Read 16bit pixeldata from display controller (with dummy cycle)

Parameters:
converttrue/false. Convert 18bit to 16bit, some controllers returns 18bit
Returns:
16bit color

Implements Protocols.

Definition at line 91 of file SPI8.cpp.

unsigned int rd_reg_data32 ( unsigned char  reg ) [protected, virtual]

Read 4x8bit register data (with dummy cycle)

Parameters:
regthe register to read
Returns:
data as uint

Implements Protocols.

Definition at line 110 of file SPI8.cpp.

unsigned short reg_read ( unsigned char  reg ) [protected, virtual]

ILI932x specific, read register.

Parameters:
regregister to be read
Returns:
16bit register value

Implements Protocols.

Definition at line 178 of file SPI8.cpp.

void reg_select ( unsigned char  reg,
bool  forread = false 
) [protected, virtual]

ILI932x specific, select register for a successive write or read.

Parameters:
regregister to be selected
forreadfalse = a write next (default), true = a read next
Note:
forread only used by SPI protocols

Implements Protocols.

Definition at line 151 of file SPI8.cpp.

void reg_write ( unsigned char  reg,
unsigned short  data 
) [protected, virtual]

ILI932x specific, write register with data.

Parameters:
regregister to write
data16bit data

Implements Protocols.

Definition at line 164 of file SPI8.cpp.

void wr_cmd16 ( unsigned short  cmd ) [protected, virtual]

Send 2x8bit command to display controller.

Parameters:
cmd,:halfword to send

Implements Protocols.

Definition at line 43 of file SPI8.cpp.

void wr_cmd8 ( unsigned char  cmd ) [protected, virtual]

Send 8bit command to display controller.

Parameters:
cmd,:byte to send

Implements Protocols.

Definition at line 33 of file SPI8.cpp.

void wr_data16 ( unsigned short  data ) [protected, virtual]

Send 2x8bit data to display controller.

Parameters:
data,:halfword to send

Implements Protocols.

Definition at line 50 of file SPI8.cpp.

void wr_data8 ( unsigned char  data ) [protected, virtual]

Send 8bit data to display controller.

Parameters:
data,:byte to send

Implements Protocols.

Definition at line 39 of file SPI8.cpp.

void wr_gram ( unsigned short  data ) [protected, virtual]

Send 16bit pixeldata to display controller.

Parameters:
data,:halfword to send

Implements Protocols.

Definition at line 55 of file SPI8.cpp.

void wr_gram ( unsigned short  data,
unsigned int  count 
) [protected, virtual]

Send same 16bit pixeldata to display controller multiple times.

Parameters:
data,:halfword to send
count,:how many

Implements Protocols.

Definition at line 60 of file SPI8.cpp.

void wr_grambuf ( unsigned short *  data,
unsigned int  lenght 
) [protected, virtual]

Send array of pixeldata shorts to display controller.

Parameters:
data,:unsigned short pixeldata array
lenght,:lenght (in shorts)

Implements Protocols.

Definition at line 81 of file SPI8.cpp.

Generated on Tue Jul 12 2022 18:00:35 by  doxygen 1.7.2