David's line following code from the LVBots competition, 2015.
Dependencies: GeneralDebouncer Pacer PololuEncoder mbed
Fork of DeadReckoning by
motors.cpp
- Committer:
- DavidEGrayson
- Date:
- 2014-02-22
- Revision:
- 8:78b1ff957cba
- Parent:
- 7:85b8b5acfb22
- Child:
- 9:9734347b5756
File content as of revision 8:78b1ff957cba:
#include <mbed.h> #include "motors.h" // Application mbed pin LPC1768 // Motor 1 PWM p26 P2[0]/PWM1[1] // Motor 1 dir p25 // Motor 2 PWM p24 P2[2]/PWM1[3] // Motor 2 dir p23 // Clock structure: // System clock: 96 MHz // In LPC_SC->PCLKSEL0, PWM is assigned to system clock / 4 by default, so it ticks at 24 MHz. // This allows us to have 1200 possible speeds at 20 kHz. DigitalOut motor1Dir(p25); DigitalOut motor2Dir(p23); void motors_init() { //PwmOut(p26).period_us(100); // Power the PWM module by setting PCPWM1 bit in PCONP register. (Table 46). LPC_SC->PCONP |= (1 << 6); // In PCLKSEL0 register, set the clock for PWM1 to be equal to CCLK/4 (96/4 = 24 MHz). LPC_SC->PCLKSEL0 &= ~(3 << 12); // Select the functions of P2.0 and P2.2 as PWM. (Table 83). LPC_PINCON->PINSEL4 = (LPC_PINCON->PINSEL4 & ~((3 << 0) | (3 << 4))) | ((1 << 0) | (1 << 4)); // Set most parts of the PWM module to their defaults. LPC_PWM1->TCR = 0; LPC_PWM1->CTCR = 0; LPC_PWM1->CCR = 0; // Enable PWM output 1 and PWM output 3. LPC_PWM1->PCR = (1 << 9) | (1 << 11); LPC_PWM1->MCR = (1 << 1); // Reset PWMTC when it is equal to MR0. LPC_PWM1->MR0 = 1200; // Set the period. This must be done before enabling PWM. LPC_PWM1->LER = (1 << 0); motors_speed_set(0, 0); LPC_PWM1->TCR = (1 << 0) | (1 << 3); // Enable the PWM counter and enable PWM. } void motors_speed_set(int16_t motor1_speed, int16_t motor2_speed) { if (motor1_speed < 0) { motor1_speed = -motor1_speed; motor1Dir = 0; } else { motor1Dir = 1; } LPC_PWM1->MR1 = motor1_speed; if (motor2_speed < 0) { motor2_speed = -motor2_speed; motor2Dir = 0; } else { motor2Dir = 1; } LPC_PWM1->MR3 = motor2_speed; LPC_PWM1->LER |= (1<<1) | (1<<3); }