ublox-cellular-base

Dependents of ublox-cellular-base

A dependent is a program or library which makes use of this library.

To make changes in program in test
Example program for the UbloxCellularDriverGen class, providing SMS, USSD and module file system support. This program may be used on the C027 and C030 (non N2xx-flavour) boards. AT, C027, C030, file, SMS, u-blox, ussd
Version of HelloMQTT with u-blox cellular (C027 and C030) boards added. C027, C030, CellularInterface, MQTT, u-blox
program to export new ublox drivers
Checking for unnecessary added libraries.
Example program demonstrate the use of the User LEDs and the User Button. The example also initializes the I2C3 Bus for the battery charger BQ24295, sets the battery charger and … AT, BQ24295, C030, Serial USB Sniffer, ublox, UBLOX_C030
Example program running mbedClient over UbloxATCellularInterface or OnboardCellularInterface for the C030 platform. AT, C030, CellularInterface, mbedClient, u-blox
Simple example for SARA modem.
The program sends the current location over the cellular network.
Example NB-IoT Project for ublox C030-N211
example-ublox-cellular-interface_rat_mno
nothing
I am in my way
Example program for UART power saving configuration of cellular modem. This program can be used with UBLOX_C030_R412M board. It has nothing to do with 3GPP power saving mode.
Example program to demonstrate the use of the modem providing CAT-M1, NB1 and 2G support. It may be used on the C030-R412M boards.
this is a direct fork of example-ublox-cellular-interface that adds support for USBSerial, and leverages the geneva-cellular-driver library.
pelion-example-common
Generic Pelion Device Management example for various U-blox-based boards.
ublox-cellular-psm-mnofix
Increasing time for which module remains in PSM.
Example program for power saving mode of cellular modem. This program can be used with UBLOX_C030_R412M board.
example-ublox-csim-cellular
example-ublox-cellular-interface
example-ublox-cellular-interface_test
Example program that uses the mbed UbloxATCellularInterface or OnboardCellularInterface classes to perform simple sockets operations. This program can be used on the C027 and C030 boards, including the C030 N2xx … AT, C027, C030, CellularInterface, sockets, u-blox
Creating fork on January 2020
Example program to demonstrate the use of the UbloxATCellularInterfaceExt class, providing FTP, HTTP, and CellLocate support. It may be used on the C027 and C030 (non-N2xx flavour) boards. AT, C027, C030, CellLocate, CellularInterface, FTP, http, u-blox
marzo