TreppenRobo / Mbed OS PrototypV2

Prototyp V2

Dependencies:   PM2_Libary

main.cpp@33:70ea029a69e8, 2022-04-06 (annotated)

Committer:
lupomic
Date:
Wed Apr 06 12:38:20 2022 +0200
Revision:
33:70ea029a69e8
Parent:
32:bf35aeffc374
Child:
34:9f779e91168e
basic functions

Who changed what in which revision?

UserRevisionLine numberNew contents of line
pmic 1:93d997d6b232 1 #include "mbed.h"
pmic 17:c19b471f05cb 2 #include "PM2_Libary.h"
lupomic 33:70ea029a69e8 3 #include <cstdint>
lupomic 31:24081337c9ed 4
pmic 24:86f1a63e35a0 5 // logical variable main task
pmic 24:86f1a63e35a0 6 bool do_execute_main_task = false; // this variable will be toggled via the user button (blue button) to or not to execute the main task
pmic 17:c19b471f05cb 7
pmic 24:86f1a63e35a0 8 // user button on nucleo board
pmic 24:86f1a63e35a0 9 Timer user_button_timer; // create Timer object which we use to check if user button was pressed for a certain time (robust against signal bouncing)
pmic 24:86f1a63e35a0 10 InterruptIn user_button(PC_13); // create InterruptIn interface object to evaluate user button falling and rising edge (no blocking code in ISR)
pmic 24:86f1a63e35a0 11 void user_button_pressed_fcn(); // custom functions which gets executed when user button gets pressed and released, definition below
pmic 24:86f1a63e35a0 12 void user_button_released_fcn();
pmic 6:e1fa1a2d7483 13
pmic 24:86f1a63e35a0 14 // while loop gets executed every main_task_period_ms milliseconds
pmic 24:86f1a63e35a0 15 int main_task_period_ms = 50; // define main task period time in ms e.g. 50 ms -> main task runns 20 times per second
pmic 24:86f1a63e35a0 16 Timer main_task_timer; // create Timer object which we use to run the main task every main task period time in ms
pmic 6:e1fa1a2d7483 17
pmic 24:86f1a63e35a0 18 // Sharp GP2Y0A41SK0F, 4-40 cm IR Sensor
pmic 24:86f1a63e35a0 19 float ir_distance_mV = 0.0f; // define variable to store measurement
pmic 24:86f1a63e35a0 20 AnalogIn ir_analog_in(PC_2); // create AnalogIn object to read in infrared distance sensor, 0...3.3V are mapped to 0...1
pmic 6:e1fa1a2d7483 21
lupomic 33:70ea029a69e8 22
lupomic 33:70ea029a69e8 23
pmic 24:86f1a63e35a0 24 // 78:1, 100:1, ... Metal Gearmotor 20Dx44L mm 12V CB
pmic 24:86f1a63e35a0 25 DigitalOut enable_motors(PB_15); // create DigitalOut object to enable dc motors
pmic 17:c19b471f05cb 26
pmic 24:86f1a63e35a0 27 float pwm_period_s = 0.00005f; // define pwm period time in seconds and create FastPWM objects to command dc motors
lupomic 33:70ea029a69e8 28 //motor pin declaration
lupomic 33:70ea029a69e8 29 FastPWM pwm_M_right(PA_9);
lupomic 33:70ea029a69e8 30 FastPWM pwm_M_left(PB_13);
lupomic 33:70ea029a69e8 31 FastPWM pwm_M_arm(PA_10);
pmic 17:c19b471f05cb 32
lupomic 33:70ea029a69e8 33 //Encoder pin declaration
lupomic 33:70ea029a69e8 34 EncoderCounter encoder_M_right(PA_6, PC_7); //encoder pin decalaration for wheels right side
lupomic 33:70ea029a69e8 35 EncoderCounter encoder_M_left(PB_6, PB_7); //encoder pin decalaration for wheels left side
lupomic 33:70ea029a69e8 36 EncoderCounter encoder_M_arm(PA_0, PA_1); //encoder pin decalaration for arm
pmic 17:c19b471f05cb 37
pmic 30:1e8295770bc1 38 // create SpeedController and PositionController objects, default parametrization is for 78.125:1 gear box
pmic 24:86f1a63e35a0 39 float max_voltage = 12.0f; // define maximum voltage of battery packs, adjust this to 6.0f V if you only use one batterypack
lupomic 33:70ea029a69e8 40 float counts_per_turn_wheels = 2000.0f * 100.0f; // define counts per turn at gearbox end (counts/turn * gearratio) for wheels
lupomic 33:70ea029a69e8 41 float counts_per_turn_arm = 40000.0f * 100.0f; // define counts per turn at gearbox end (counts/turn * gearratio) for arm
pmic 25:ea1d6e27c895 42 float kn = 180.0f / 12.0f; // define motor constant in rpm per V
pmic 30:1e8295770bc1 43 float k_gear = 100.0f / 78.125f; // define additional ratio in case you are using a dc motor with a different gear box, e.g. 100:1
pmic 30:1e8295770bc1 44 float kp = 0.1f; // define custom kp, this is the default speed controller gain for gear box 78.125:1
pmic 6:e1fa1a2d7483 45
lupomic 33:70ea029a69e8 46 //motors for tracks
lupomic 33:70ea029a69e8 47 PositionController positionController_M_right(counts_per_turn_wheels * k_gear, kn / k_gear, kp * k_gear, max_voltage, pwm_M_right, encoder_M_right); // parameters adjusted to 100:1 gear, we need a different speed controller gain here
lupomic 33:70ea029a69e8 48 PositionController positionController_M_left(counts_per_turn_wheels * k_gear, kn / k_gear, kp * k_gear, max_voltage, pwm_M_left, encoder_M_left); // parameters adjusted to 100:1 gear, we need a different speed controller gain here
lupomic 33:70ea029a69e8 49 //Arm Motor
lupomic 33:70ea029a69e8 50 PositionController positionController_M_Arm(counts_per_turn_arm * k_gear, kn / k_gear, kp * k_gear, max_voltage, pwm_M_arm, encoder_M_arm); // parameters adjusted to 100:1 gear, we need a different speed controller gain here
pmic 17:c19b471f05cb 51
lupomic 33:70ea029a69e8 52 //float max_speed_rps = 0.5f; not sure if needed // define maximum speed that the position controller is changig the speed, has to be smaller or equal to kn * max_voltage
lupomic 33:70ea029a69e8 53 // PositionController positionController_M3(counts_per_turn, kn, max_voltage, pwm_M3, encoder_M3); // default 78.125:1 gear with default contoller parameters
lupomic 33:70ea029a69e8 54 //PositionController positionController_M3(counts_per_turn * k_gear, kn / k_gear, kp * k_gear, max_voltage, pwm_M3, encoder_M3); // parameters adjusted to 100:1 gear, we need a different speed controller gain here
pmic 17:c19b471f05cb 55
pmic 17:c19b471f05cb 56
pmic 24:86f1a63e35a0 57 // LSM9DS1 IMU, carefull: not all PES boards have an imu (chip shortage)
pmic 25:ea1d6e27c895 58 // LSM9DS1 imu(PC_9, PA_8); // create LSM9DS1 comunication object, if you want to be able to use the imu you need to #include "LSM9DS1_i2c.h"
pmic 20:7e7325edcf5c 59
lupomic 33:70ea029a69e8 60 //Platzhalter Variabeln für die Positionierung
lupomic 33:70ea029a69e8 61 int16_t PositionStair = 20;
lupomic 33:70ea029a69e8 62 int16_t PositionBackOff = 100;
lupomic 33:70ea029a69e8 63 int16_t degArmStart = 40;
lupomic 33:70ea029a69e8 64 int16_t degArmLift = 18;
lupomic 33:70ea029a69e8 65 int ToNextFunction = 1;
lupomic 33:70ea029a69e8 66
lupomic 33:70ea029a69e8 67 int StartPosition(int16_t deg){
lupomic 33:70ea029a69e8 68
lupomic 33:70ea029a69e8 69 positionController_M_Arm.setDesiredRotation(deg);
lupomic 33:70ea029a69e8 70
lupomic 33:70ea029a69e8 71 return NULL;
lupomic 33:70ea029a69e8 72 }
lupomic 33:70ea029a69e8 73 //Drives forward into the next step
lupomic 33:70ea029a69e8 74 int Drive(int16_t dist){
lupomic 33:70ea029a69e8 75 int8_t i = 0; //prov condition variable
lupomic 33:70ea029a69e8 76
lupomic 33:70ea029a69e8 77 int8_t distance = dist; //distance which will be driven in [mm]
lupomic 33:70ea029a69e8 78 float factor = 1.0f; //factor for calculating the value in to the float which will be given to the setDesiredRotation function
lupomic 33:70ea029a69e8 79 float distanceValue = float(distance)*factor;
lupomic 33:70ea029a69e8 80
lupomic 33:70ea029a69e8 81 positionController_M_right.setDesiredRotation(distanceValue);
lupomic 33:70ea029a69e8 82 positionController_M_left.setDesiredRotation(distanceValue);
lupomic 33:70ea029a69e8 83
lupomic 33:70ea029a69e8 84 return 0;
lupomic 33:70ea029a69e8 85 }
lupomic 33:70ea029a69e8 86
lupomic 33:70ea029a69e8 87 //only turns the arm until the robot is on the next step
lupomic 33:70ea029a69e8 88 //not yet clear if the motor controler function drives to a absolute poition or if it drives the given distance relative to the current position
lupomic 33:70ea029a69e8 89 int LiftUp(int16_t deg){
lupomic 33:70ea029a69e8 90 int8_t rotation = deg;
lupomic 33:70ea029a69e8 91 int8_t i = 0; //prov condition variable
lupomic 33:70ea029a69e8 92
lupomic 33:70ea029a69e8 93 positionController_M_Arm.setDesiredRotation(deg);
lupomic 33:70ea029a69e8 94
lupomic 33:70ea029a69e8 95
lupomic 33:70ea029a69e8 96 return 0;
lupomic 33:70ea029a69e8 97 }
lupomic 33:70ea029a69e8 98 //pow function is here so we dont have to use the math.h library
lupomic 33:70ea029a69e8 99 //it takes 2 arguments the base can be any negative or positive floating point number the power has to be a hos to be an "integer" defined as a double
lupomic 33:70ea029a69e8 100 double powerx(double base, double pow2){
lupomic 33:70ea029a69e8 101 double result = -1;
lupomic 33:70ea029a69e8 102 double power = pow2;
lupomic 33:70ea029a69e8 103 double basis = base;
lupomic 33:70ea029a69e8 104 result = 1;
lupomic 33:70ea029a69e8 105 //handling negative exponents
lupomic 33:70ea029a69e8 106 if(power<0){
lupomic 33:70ea029a69e8 107 for(double i=1; i<=(power*(-1.0)); i++) {
lupomic 33:70ea029a69e8 108 result *= basis;
lupomic 33:70ea029a69e8 109 }
lupomic 33:70ea029a69e8 110 result = 1.0/result;
lupomic 33:70ea029a69e8 111 }
lupomic 33:70ea029a69e8 112 //handling positive exponents
lupomic 33:70ea029a69e8 113 else{
lupomic 33:70ea029a69e8 114 for(double i=1; i<=power; i++){
lupomic 33:70ea029a69e8 115 result *= basis;}}
lupomic 33:70ea029a69e8 116
lupomic 33:70ea029a69e8 117 return result;
lupomic 33:70ea029a69e8 118 }
lupomic 33:70ea029a69e8 119
lupomic 33:70ea029a69e8 120 double mapping(float adc_value_mV){
lupomic 33:70ea029a69e8 121 double distance = 0.0f; //distance in mm
lupomic 33:70ea029a69e8 122 double infY =360 , supY = 2360; //Window for sensor values
lupomic 33:70ea029a69e8 123 double voltage_mV = adc_value_mV;
lupomic 33:70ea029a69e8 124 double p1 = -1.127*powerx(10,-14), p2 = 8.881*powerx(10,-11), p3 = -2.76*powerx(10,-7), p4 = 0.0004262, p5 = -0.3363, p6 = 120.1 ; //faktoren für polynomkurve -> von matlab exportiert
lupomic 33:70ea029a69e8 125 if(voltage_mV > infY && voltage_mV < supY){
lupomic 33:70ea029a69e8 126 distance = p1*powerx(voltage_mV,5) + p2*powerx(voltage_mV,4) + p3*powerx(voltage_mV,3) + p4*powerx(voltage_mV,2) + p5*voltage_mV + p6;
lupomic 33:70ea029a69e8 127 }
lupomic 33:70ea029a69e8 128 return (distance);
lupomic 33:70ea029a69e8 129 }
lupomic 33:70ea029a69e8 130
lupomic 33:70ea029a69e8 131
lupomic 33:70ea029a69e8 132 int main(void)
pmic 23:26b3a25fc637 133 {
pmic 24:86f1a63e35a0 134 // attach button fall and rise functions to user button object
lupomic 33:70ea029a69e8 135 user_button.fall(&user_button_pressed_fcn);
lupomic 33:70ea029a69e8 136 user_button.rise(&user_button_released_fcn);
lupomic 33:70ea029a69e8 137
pmic 24:86f1a63e35a0 138
pmic 6:e1fa1a2d7483 139
lupomic 33:70ea029a69e8 140 while (true){
lupomic 33:70ea029a69e8 141 ir_distance_mV = 1.0e3f * ir_analog_in.read() * 3.3f;
lupomic 33:70ea029a69e8 142
lupomic 33:70ea029a69e8 143 printf("test pow function 2 ^ 2 %lf\n",powerx(2,2));
lupomic 33:70ea029a69e8 144 printf("test mapping function %f\n", mapping(ir_distance_mV));
pmic 6:e1fa1a2d7483 145
lupomic 33:70ea029a69e8 146 printf("IR sensor (mV): %3.3f\n", ir_distance_mV);
lupomic 33:70ea029a69e8 147
pmic 6:e1fa1a2d7483 148
lupomic 33:70ea029a69e8 149 switch (ToNextFunction) {
lupomic 33:70ea029a69e8 150 case 1: StartPosition(degArmStart);
lupomic 33:70ea029a69e8 151 printf("a");
lupomic 33:70ea029a69e8 152 // ToNextFunction+=1;
lupomic 33:70ea029a69e8 153 break;
lupomic 33:70ea029a69e8 154 case 2: Drive(PositionStair);
lupomic 33:70ea029a69e8 155 printf("b");
lupomic 33:70ea029a69e8 156 // ToNextFunction+=1;
lupomic 33:70ea029a69e8 157 break;
lupomic 33:70ea029a69e8 158 case 3:// LiftUp(degArmLift);
lupomic 33:70ea029a69e8 159 // ToNextFunction+=1;
lupomic 33:70ea029a69e8 160 printf("c");
lupomic 33:70ea029a69e8 161 break;
lupomic 33:70ea029a69e8 162 case 4: Drive(PositionBackOff);
lupomic 33:70ea029a69e8 163 printf("d");
lupomic 33:70ea029a69e8 164 // ToNextFunction+=1;
lupomic 33:70ea029a69e8 165 break;
lupomic 33:70ea029a69e8 166 case 5: LiftUp(degArmStart);
lupomic 33:70ea029a69e8 167 printf("d");
lupomic 33:70ea029a69e8 168 // ToNextFunction = 0;
lupomic 33:70ea029a69e8 169 break;
lupomic 33:70ea029a69e8 170 }
pmic 6:e1fa1a2d7483 171
lupomic 33:70ea029a69e8 172
lupomic 33:70ea029a69e8 173
lupomic 33:70ea029a69e8 174 }
lupomic 33:70ea029a69e8 175 // read timer and make the main thread sleep for the remaining time span (non blocking)
pmic 24:86f1a63e35a0 176 int main_task_elapsed_time_ms = std::chrono::duration_cast<std::chrono::milliseconds>(main_task_timer.elapsed_time()).count();
pmic 24:86f1a63e35a0 177 thread_sleep_for(main_task_period_ms - main_task_elapsed_time_ms);
lupomic 33:70ea029a69e8 178 return 0;
pmic 1:93d997d6b232 179 }
pmic 6:e1fa1a2d7483 180
lupomic 33:70ea029a69e8 181
pmic 24:86f1a63e35a0 182 void user_button_pressed_fcn()
pmic 25:ea1d6e27c895 183 {
pmic 26:28693b369945 184 user_button_timer.start();
pmic 6:e1fa1a2d7483 185 user_button_timer.reset();
pmic 6:e1fa1a2d7483 186 }
pmic 6:e1fa1a2d7483 187
lupomic 33:70ea029a69e8 188 void user_button_released_fcn() {
pmic 24:86f1a63e35a0 189 // read timer and toggle do_execute_main_task if the button was pressed longer than the below specified time
pmic 24:86f1a63e35a0 190 int user_button_elapsed_time_ms = std::chrono::duration_cast<std::chrono::milliseconds>(user_button_timer.elapsed_time()).count();
pmic 6:e1fa1a2d7483 191 user_button_timer.stop();
pmic 24:86f1a63e35a0 192 if (user_button_elapsed_time_ms > 200) {
lupomic 33:70ea029a69e8 193 ToNextFunction += 1;}
lupomic 33:70ea029a69e8 194 }