BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
source/platform/ble_clock.c
- Committer:
- Vincent Coubard
- Date:
- 2016-09-15
- Branch:
- 34e2f6254ad7de7fc7f377a0614c3a672cf7cd5c
- Revision:
- 280:fbee0e3444be
- Parent:
- source/platform/clock.c@ 274:4826afdae563
- Child:
- 297:c26445716704
File content as of revision 280:fbee0e3444be:
#include "clock.h" #ifdef YOTTA_CFG_MBED_OS #include "mbed-drivers/wait_api.h" #include "mbed-drivers/rtc_time.h" #else #include "wait_api.h" #include "rtc_time.h" #endif const uint32_t CLOCK_SECOND = 1000; /*---------------------------------------------------------------------------*/ void Clock_Init(void) { //Not Used } /*---------------------------------------------------------------------------*/ tClockTime Clock_Time(void) { return clock(); } /*---------------------------------------------------------------------------*/ /** * Wait for a multiple of 1 ms. * */ void Clock_Wait(uint32_t i) { wait_ms(i); } /*---------------------------------------------------------------------------*/